[PATCH 5.10 000/238] 5.10.214-rc1 review

[PATCH 5.10 000/238] 5.10.214-rc1 review

[Sasha Levin]

This is the start of the stable review cycle for the 5.10.214 release.
There are 238 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Tue Mar 26 11:40:23 PM UTC 2024.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
        https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-5.10.y&id2=v5.10.213
or in the git tree and branch at:
        git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

Thanks,
Sasha

-------------
Pseudo-Shortlog of commits:

Ajay Singh (1):
  wifi: wilc1000: fix multi-vif management when deleting a vif

Alban Boyé (1):
  ASoC: Intel: bytcr_rt5640: Add an extra entry for the Chuwi Vi8 tablet

Alex Bee (1):
  drm/rockchip: inno_hdmi: Fix video timing

Alexander Gordeev (1):
  net/iucv: fix the allocation size of iucv_path_table array

Alexander Stein (1):
  media: tc358743: register v4l2 async device only after successful
    setup

Alexei Starovoitov (1):
  bpf: Factor out bpf_spin_lock into helpers.

Alexis Lothoré (3):
  wifi: wilc1000: fix declarations ordering
  wifi: wilc1000: fix RCU usage in connect path
  wifi: wilc1000: prevent use-after-free on vif when cleaning up all
    interfaces

Anastasia Belova (1):
  cpufreq: brcmstb-avs-cpufreq: add check for cpufreq_cpu_get's return
    value

Andrew Ballance (1):
  gen_compile_commands: fix invalid escape sequence warning

Andy Shevchenko (1):
  serial: 8250_exar: Don't remove GPIO device on suspend

AngeloGioacchino Del Regno (1):
  drm/mediatek: dsi: Fix DSI RGB666 formats and definitions

Armin Wolf (1):
  ACPI: processor_idle: Fix memory leak in acpi_processor_power_exit()

Arnaud Pouliquen (2):
  remoteproc: stm32: Fix incorrect type in assignment for va
  remoteproc: stm32: Fix incorrect type assignment returned by
    stm32_rproc_get_loaded_rsc_tablef

Arnd Bergmann (11):
  fs/select: rework stack allocation hack for clang
  wifi: brcmsmac: avoid function pointer casts
  media: pvrusb2: fix pvr2_stream_callback casts
  crypto: arm/sha - fix function cast warnings
  mtd: rawnand: lpc32xx_mlc: fix irq handler prototype
  media: dvb-frontends: avoid stack overflow warnings with clang
  media: mediatek: vcodec: avoid -Wcast-function-type-strict warning
  scsi: csiostor: Avoid function pointer casts
  scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn
  remoteproc: stm32: use correct format strings on 64-bit
  soc: fsl: dpio: fix kcalloc() argument order

Arınç ÜNAL (1):
  net: dsa: mt7530: prevent possible incorrect XTAL frequency selection

Athaariq Ardhiansyah (1):
  ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops

Baokun Li (1):
  quota: simplify drop_dquot_ref()

Baruch Siach (1):
  mtd: maps: physmap-core: fix flash size larger than 32-bit

Ben Wolsieffer (1):
  watchdog: stm32_iwdg: initialize default timeout

Bitterblue Smith (1):
  wifi: rtw88: 8821c: Fix false alarm count

Borislav Petkov (AMD) (1):
  x86/paravirt: Fix build due to __text_gen_insn() backport

Breno Leitao (1):
  net: blackhole_dev: fix build warning for ethh set but not used

Bryan O'Donoghue (1):
  clk: Fix clk_core_get NULL dereference

Cai Huoqing (1):
  drm/tegra: dsi: Make use of the helper function dev_err_probe()

Chen Ni (2):
  sr9800: Add check for usbnet_get_endpoints
  drm/tegra: dsi: Add missing check for of_find_device_by_node

Chen-Yu Tsai (1):
  pinctrl: mediatek: Drop bogus slew rate register range for MT8192

Christoph Hellwig (2):
  block: add a new set_read_only method
  md: implement ->set_read_only to hook into BLKROSET processing

Christophe JAILLET (9):
  wireless: Remove redundant 'flush_workqueue()' calls
  mmc: wmt-sdmmc: remove an incorrect release_mem_region() call in the
    .remove function
  drm/tegra: dsi: Fix some error handling paths in tegra_dsi_probe()
  drm/tegra: dsi: Fix missing pm_runtime_disable() in the error handling
    path of tegra_dsi_probe()
  drm/tegra: output: Fix missing i2c_put_adapter() in the error handling
    paths of tegra_output_probe()
  PCI: switchtec: Fix an error handling path in switchtec_pci_probe()
  clk: hisilicon: hi3519: Release the correct number of gates in
    hi3519_clk_unregister()
  net: sunrpc: Fix an off by one in rpc_sockaddr2uaddr()
  NFS: Fix an off by one in root_nfs_cat()

Chun-Yi Lee (1):
  aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts

Colin Ian King (1):
  usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin

Dan Carpenter (1):
  staging: greybus: fix get_channel_from_mode() failure path

Daniel Thompson (3):
  backlight: da9052: Fully initialize backlight_properties during probe
  backlight: lm3639: Fully initialize backlight_properties during probe
  backlight: lp8788: Fully initialize backlight_properties during probe

Daniil Dulov (2):
  media: go7007: add check of return value of go7007_read_addr()
  media: pvrusb2: remove redundant NULL check

David Howells (1):
  afs: Revert "afs: Hide silly-rename files from userspace"

Duoming Zhou (1):
  nfp: flower: handle acti_netdevs allocation failure

Edward Adam Davis (1):
  media: pvrusb2: fix uaf in pvr2_context_set_notify

Eric Dumazet (4):
  sock_diag: annotate data-races around sock_diag_handlers[family]
  inet_diag: annotate data-races around inet_diag_table[]
  net: ip_tunnel: make sure to pull inner header in ip_tunnel_rcv()
  packet: annotate data-races around ignore_outgoing

Ethan Zhao (2):
  PCI: Make pci_dev_is_disconnected() helper public for other drivers
  iommu/vt-d: Don't issue ATS Invalidation request when device is
    disconnected

Fedor Pchelkin (1):
  drm/tegra: put drm_gem_object ref on error in tegra_fb_create

Fei Shao (1):
  spi: spi-mt65xx: Fix NULL pointer access in interrupt handler

Felix Maurer (1):
  hsr: Handle failures in module init

Filipe Manana (1):
  btrfs: add and use helper to check if block group is used

Gavrilov Ilia (6):
  tcp: fix incorrect parameter validation in the do_tcp_getsockopt()
    function
  ipmr: fix incorrect parameter validation in the ip_mroute_getsockopt()
    function
  l2tp: fix incorrect parameter validation in the pppol2tp_getsockopt()
    function
  udp: fix incorrect parameter validation in the udp_lib_getsockopt()
    function
  net: kcm: fix incorrect parameter validation in the kcm_getsockopt)
    function
  net/x25: fix incorrect parameter validation in the x25_getsockopt()
    function

Geert Uytterhoeven (2):
  ARM: dts: renesas: r8a73a4: Fix external clocks and clock rate
  ARM: dts: arm: realview: Fix development chip ROM compatible value

George Stark (1):
  leds: aw2013: Unlock mutex before destroying it

Greg Joyce (1):
  block: sed-opal: handle empty atoms when parsing response

Gustavo A. R. Silva (3):
  net/ipv4: Replace one-element array with flexible-array member
  net/ipv4: Revert use of struct_size() helper
  net/ipv4/ipv6: Replace one-element arraya with flexible-array members

Hans de Goede (1):
  ASoC: rt5645: Make LattePanda board DMI match more precise

Harry Wentland (1):
  drm: Don't treat 0 as -1 in drm_fixp2int_ceil

Hou Tao (3):
  bpf: Defer the free of inner map when necessary
  x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h
  x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()

Hsin-Yi Wang (1):
  drm/mediatek: Fix a null pointer crash in
    mtk_drm_crtc_finish_page_flip

Hugo Villeneuve (1):
  serial: max310x: fix syntax error in IRQ error message

Ian Rogers (1):
  perf stat: Avoid metric-only segv

Ilpo Järvinen (1):
  PCI/DPC: Print all TLP Prefixes, not just the first

Jakub Kicinski (1):
  selftests: tls: use exact comparison in recv_partial

Jan Kara (1):
  quota: Fix rcu annotations of inode dquot pointers

Jens Axboe (3):
  io_uring/unix: drop usage of io_uring socket
  io_uring: drop any code related to SCM_RIGHTS
  io_uring: don't save/restore iowait state

Jernej Skrabec (3):
  media: sun8i-di: Fix coefficient writes
  media: sun8i-di: Fix power on/off sequences
  media: sun8i-di: Fix chroma difference threshold

Jerome Brunet (4):
  ASoC: meson: aiu: fix function pointer type mismatch
  ASoC: meson: t9015: fix function pointer type mismatch
  ASoC: meson: axg-tdm-interface: fix mclk setup without mclk-fs
  ASoC: meson: axg-tdm-interface: add frame rate constraint

Jiaxun Yang (1):
  MIPS: Clear Cause.BD in instruction_pointer_set

Jie Wang (1):
  net: hns3: fix port duplex configure error in IMP reset

Jinjie Ruan (1):
  wifi: mwifiex: debugfs: Drop unnecessary error check for
    debugfs_create_dir()

Jiri Slaby (SUSE) (1):
  tty: vt: fix 20 vs 0x20 typo in EScsiignore

Johan Carlsson (1):
  ALSA: usb-audio: Stop parsing channels bits when all channels are
    found.

Johan Hovold (1):
  PCI/AER: Fix rootport attribute paths in ABI docs

Johannes Berg (1):
  wifi: iwlwifi: dbg-tlv: ensure NUL termination

Jonas Dreßler (1):
  Bluetooth: Remove superfluous call to hci_conn_check_pending()

Jorge Mora (2):
  NFSv4.2: fix nfs4_listxattr kernel BUG at mm/usercopy.c:102
  NFSv4.2: fix listxattr maximum XDR buffer size

Jörg Wedekind (1):
  PCI: Mark 3ware-9650SE Root Port Extended Tags as broken

Kajol Jain (1):
  powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value
    checks

Kamal Heib (1):
  net: ena: Remove ena_select_queue

Kees Cook (1):
  x86, relocs: Ignore relocations in .notes section

Konrad Dybcio (3):
  clk: qcom: reset: Commonize the de/assert functions
  clk: qcom: reset: Ensure write completion on reset de/assertion
  clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times

Kuninori Morimoto (1):
  ASoC: meson: Use dev_err_probe() helper

Kuniyuki Iwashima (1):
  af_unix: Annotate data-race of gc_in_progress in wait_for_unix_gc().

Kunwu Chan (1):
  x86/xen: Add some null pointer checking to smp.c

Kévin L'hôpital (1):
  net: phy: fix phy_get_internal_delay accessing an empty array

Leon Romanovsky (1):
  RDMA/mlx5: Fix fortify source warning while accessing Eth segment

Li Nan (1):
  md: Don't clear MD_CLOSING when the raid is about to stop

Linu Cherian (1):
  octeontx2-af: Use matching wake_up API variant in CGX command
    interface

Luca Weiss (2):
  backlight: lm3630a: Initialize backlight_properties on init
  backlight: lm3630a: Don't set bl->props.brightness in get_brightness

Lucas Stach (1):
  media: imx: csc/scaler: fix v4l2_ctrl_handler memory leak

Luiz Augusto von Dentz (1):
  Bluetooth: hci_core: Fix possible buffer overflow

Manuel Fombuena (1):
  HID: multitouch: Add required quirk for Synaptics 0xcddc device

Marek Vasut (1):
  regmap: Add missing map->bus check

Mario Limonciello (1):
  iommu/amd: Mark interrupt as managed

Martin KaFai Lau (1):
  bpf: net: Change do_ip_getsockopt() to take the sockptr_t argument

Martin Kaistra (1):
  wifi: rtl8xxxu: add cancel_work_sync() for c2hcmd_work

Masahiro Yamada (1):
  kconfig: fix infinite loop when expanding a macro at the end of file

Mathieu Poirier (2):
  remoteproc: Add new get_loaded_rsc_table() to rproc_ops
  remoteproc: stm32: Move resource table setup to rproc_ops

Max Kellermann (1):
  parisc/ftrace: add missing CONFIG_DYNAMIC_FTRACE check

Mete Durlu (1):
  s390/vtime: fix average steal time calculation

Michael Ellerman (1):
  powerpc/embedded6xx: Fix no previous prototype for avr_uart_send()
    etc.

Michael Klein (1):
  ARM: dts: sun8i-h2-plus-bananapi-m2-zero: add regulator nodes vcc-dram
    and vcc1v2

Michal Vokáč (3):
  ARM: dts: imx6dl-yapp4: Move phy reset into switch node
  ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address
  ARM: dts: imx6dl-yapp4: Move the internal switch PHYs under the switch
    node

Mikhail Khvainitski (1):
  HID: lenovo: Add middleclick_workaround sysfs knob for cptkbd

Mikulas Patocka (2):
  dm-verity, dm-crypt: align "struct bvec_iter" correctly
  dm: call the resume method on internal suspend

Ming Lei (1):
  dm raid: fix false positive for requeue needed during reshape

Miri Korenblit (1):
  wifi: iwlwifi: fix EWRD table validity check

Navid Emamdoost (1):
  nbd: null check for nla_nest_start

Nikita Zhandarovich (4):
  do_sys_name_to_handle(): use kzalloc() to fix kernel-infoleak
  media: em28xx: annotate unchecked call to media_device_register()
  drm/radeon/ni: Fix wrong firmware size logging in ni_init_microcode()
  wireguard: receive: annotate data-race around
    receiving_counter.counter

Ondrej Jirman (1):
  leds: sgm3140: Add missing timer cleanup and flash gpio control

Pablo Neira Ayuso (2):
  netfilter: nft_set_pipapo: release elements in clone only from destroy
    path
  netfilter: nf_tables: do not compare internal table flags on updates

Paloma Arellano (1):
  drm/msm/dpu: add division of drm_display_mode's hskew parameter

Paul E. McKenney (1):
  rcu-tasks: Provide rcu_trace_implies_rcu_gp()

Peter Griffin (2):
  mfd: syscon: Call of_node_put() only when of_parse_phandle() takes a
    ref
  mfd: altera-sysmgr: Call of_node_put() only when of_parse_phandle()
    takes a ref

Peter Hilber (3):
  timekeeping: Fix cross-timestamp interpolation on counter wrap
  timekeeping: Fix cross-timestamp interpolation corner case decision
  timekeeping: Fix cross-timestamp interpolation for non-x86

Peter Robinson (2):
  bus: tegra-aconnect: Update dependency to ARCH_TEGRA
  dmaengine: tegra210-adma: Update dependency to ARCH_TEGRA

Petr Mladek (1):
  printk: Disable passing console lock owner completely during panic()

Quanyang Wang (1):
  crypto: xilinx - call finalize with bh disabled

Quentin Schulz (2):
  drm/rockchip: lvds: do not overwrite error code
  drm/rockchip: lvds: do not print scary message when probing defer

Rafael J. Wysocki (1):
  ACPI: scan: Fix device check notification handling

Rafał Miłecki (2):
  arm64: dts: mediatek: mt7622: add missing "device_type" to memory
    nodes
  arm64: dts: marvell: reorder crypto interrupts on Armada SoCs

Rahul Rameshbabu (4):
  wifi: b43: Stop/wake correct queue in DMA Tx path when QoS is disabled
  wifi: b43: Stop/wake correct queue in PIO Tx path when QoS is disabled
  wifi: b43: Stop correct queue in DMA worker when QoS is disabled
  wifi: b43: Disable QoS for bcm4331

Randy Dunlap (1):
  rtc: mt6397: select IRQ_DOMAIN instead of depending on it

Ranjan Kumar (1):
  scsi: mpt3sas: Prevent sending diag_reset when the controller is ready

Rikard Falkeborn (1):
  remoteproc: stm32: Constify st_rproc_ops

Roman Gushchin (1):
  bpf: Eliminate rlimit-based memory accounting for devmap maps

Ruud Bos (1):
  igb: move PEROUT and EXTTS isr logic to separate functions

Sam Ravnborg (1):
  sparc32: Fix section mismatch in leon_pci_grpci

Sasha Levin (1):
  Linux 5.10.214-rc1

Sheng Yong (1):
  f2fs: compress: fix to check unreleased compressed cluster

Shifeng Li (1):
  RDMA/device: Fix a race between mad_client and cm_client init

Shigeru Yoshida (1):
  hsr: Fix uninit-value access in hsr_get_node()

Shiming Cheng (1):
  ipv6: fib6_rules: flush route cache when rule is changed

Shyam Sundar (1):
  scsi: fc: Update formal FPIN descriptor definitions

Srinivasan Shanmugam (3):
  drm/amd/display: Fix a potential buffer overflow in
    'dp_dsc_clock_en_read()'
  drm/amd/display: Fix potential NULL pointer dereferences in
    'dcn10_set_output_transfer_func()'
  drm/amdgpu: Fix missing break in ATOM_ARG_IMM Case of
    atom_get_src_int()

Stephen Brennan (1):
  printk: Add panic_in_progress helper

Stuart Henderson (3):
  ASoC: wm8962: Enable oscillator if selecting WM8962_FLL_OSC
  ASoC: wm8962: Enable both SPKOUTR_ENA and SPKOUTL_ENA in mono mode
  ASoC: wm8962: Fix up incorrect error message in wm8962_set_fll

Subbaraya Sundeep (1):
  octeontx2-af: Use separate handlers for interrupts

Takashi Iwai (1):
  ALSA: seq: fix function cast warnings

Takashi Sakamoto (1):
  firewire: core: use long bus reset on gap count error

Thinh Tran (1):
  net/bnx2x: Prevent access to a freed page in page_pool

Thomas Zimmermann (1):
  arch/powerpc: Remove <linux/fb.h> from backlight code

Tiezhu Yang (1):
  bpftool: Silence build warning about calloc()

Tim Pambor (1):
  net: phy: dp83822: Fix RGMII TX delay configuration

Toke Høiland-Jørgensen (4):
  wifi: ath9k: delay all of ath9k_wmi_event_tasklet() until init is
    complete
  bpf: Fix DEVMAP_HASH overflow check on 32-bit arches
  bpf: Fix hashtab overflow check on 32-bit arches
  bpf: Fix stackmap overflow check on 32-bit arches

Tomi Valkeinen (1):
  drm/tidss: Fix initial plane zpos values

Tommaso Merciai (1):
  net: phy: DP83822: enable rgmii mode if phy_interface_is_rgmii

Tudor Ambarus (1):
  tty: serial: samsung: fix tx_empty() to return TIOCSER_TEMT

Uwe Kleine-König (1):
  Input: gpio_keys_polled - suppress deferred probe error for gpio

Vinicius Costa Gomes (1):
  igb: Fix missing time sync events

Viresh Kumar (1):
  OPP: debugfs: Fix warning around icc_get_name()

Wang Jianjian (1):
  quota: Fix potential NULL pointer dereference

William Kucharski (1):
  RDMA/srpt: Do not register event handler until srpt device is fully
    setup

Xingyuan Mo (1):
  wifi: ath10k: fix NULL pointer dereference in
    ath10k_wmi_tlv_op_pull_mgmt_tx_compl_ev()

Yan Zhai (2):
  rcu: add a helper to report consolidated flavor QS
  bpf: report RCU QS in cpumap kthread

Yang Jihong (3):
  perf record: Fix possible incorrect free in record__switch_output()
  perf evsel: Fix duplicate initialization of data->id in
    evsel__parse_sample()
  perf thread_map: Free strlist on normal path in
    thread_map__new_by_tid_str()

Yewon Choi (1):
  rds: introduce acquire/release ordering in acquire/release_in_xmit()

Yishai Hadas (1):
  RDMA/mlx5: Relax DEVX access upon modify commands

Yonghong Song (1):
  bpf: Mark bpf_spin_{lock,unlock}() helpers with notrace correctly

Yuxuan Hu (1):
  Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security

Zhipeng Lu (8):
  wifi: libertas: fix some memleaks in lbs_allocate_cmd_buffer()
  SUNRPC: fix some memleaks in gssx_dec_option_array
  drm/lima: fix a memleak in lima_heap_alloc
  media: v4l2-tpg: fix some memleaks in tpg_alloc
  media: v4l2-mem2mem: fix a memleak in v4l2_m2m_register_entity
  media: edia: dvbdev: fix a use-after-free
  media: go7007: fix a memleak in go7007_load_encoder
  media: ttpci: fix two memleaks in budget_av_attach

 .../testing/sysfs-bus-pci-devices-aer_stats   |   6 +-
 Makefile                                      |   4 +-
 arch/arm/boot/dts/arm-realview-pb1176.dts     |   2 +-
 arch/arm/boot/dts/imx6dl-yapp4-common.dtsi    |  28 ++-
 arch/arm/boot/dts/r8a73a4-ape6evm.dts         |  12 +
 arch/arm/boot/dts/r8a73a4.dtsi                |   9 +-
 .../dts/sun8i-h2-plus-bananapi-m2-zero.dts    |  24 ++
 arch/arm/crypto/sha256_glue.c                 |  13 +-
 arch/arm/crypto/sha512-glue.c                 |  12 +-
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi  |  10 +-
 arch/arm64/boot/dts/marvell/armada-cp11x.dtsi |  10 +-
 .../dts/mediatek/mt7622-bananapi-bpi-r64.dts  |   1 +
 arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts  |   1 +
 arch/mips/include/asm/ptrace.h                |   1 +
 arch/parisc/kernel/ftrace.c                   |   2 +-
 arch/powerpc/include/asm/backlight.h          |   5 +-
 arch/powerpc/perf/hv-gpci.c                   |  29 ++-
 .../platforms/embedded6xx/linkstation.c       |   3 -
 arch/powerpc/platforms/embedded6xx/mpc10x.h   |   3 +
 arch/powerpc/platforms/powermac/backlight.c   |  26 --
 arch/s390/kernel/vtime.c                      |   4 +-
 arch/sparc/kernel/leon_pci_grpci1.c           |   2 +-
 arch/sparc/kernel/leon_pci_grpci2.c           |   2 +-
 arch/x86/include/asm/vsyscall.h               |  10 +
 arch/x86/kernel/paravirt.c                    |   1 +
 arch/x86/mm/fault.c                           |   9 -
 arch/x86/mm/maccess.c                         |  10 +
 arch/x86/tools/relocs.c                       |   8 +
 arch/x86/xen/smp.c                            |  12 +
 block/ioctl.c                                 |   5 +
 block/opal_proto.h                            |   1 +
 block/sed-opal.c                              |   6 +-
 drivers/acpi/processor_idle.c                 |   2 +
 drivers/acpi/scan.c                           |   8 +-
 drivers/base/regmap/regmap.c                  |   2 +-
 drivers/block/aoe/aoecmd.c                    |  12 +-
 drivers/block/aoe/aoenet.c                    |   1 +
 drivers/block/nbd.c                           |   6 +
 drivers/bus/Kconfig                           |   5 +-
 drivers/clk/clk.c                             |   3 +
 drivers/clk/hisilicon/clk-hi3519.c            |   2 +-
 drivers/clk/qcom/dispcc-sdm845.c              |   2 +
 drivers/clk/qcom/reset.c                      |  27 +-
 drivers/cpufreq/brcmstb-avs-cpufreq.c         |   2 +
 drivers/crypto/xilinx/zynqmp-aes-gcm.c        |   3 +
 drivers/dma/Kconfig                           |  14 +-
 drivers/firewire/core-card.c                  |  14 +-
 drivers/gpu/drm/amd/amdgpu/atom.c             |   2 +-
 .../amd/display/amdgpu_dm/amdgpu_dm_debugfs.c |   2 +-
 .../amd/display/dc/dcn10/dcn10_hw_sequencer.c |   7 +-
 drivers/gpu/drm/lima/lima_gem.c               |  23 +-
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c       |  12 +-
 drivers/gpu/drm/mediatek/mtk_dsi.c            |  10 +-
 .../drm/msm/disp/dpu1/dpu_encoder_phys_vid.c  |   6 +-
 drivers/gpu/drm/radeon/ni.c                   |   2 +-
 drivers/gpu/drm/rockchip/inno_hdmi.c          |   4 +-
 drivers/gpu/drm/rockchip/rockchip_lvds.c      |   3 +-
 drivers/gpu/drm/tegra/dsi.c                   |  47 ++--
 drivers/gpu/drm/tegra/fb.c                    |   1 +
 drivers/gpu/drm/tegra/output.c                |  16 +-
 drivers/gpu/drm/tidss/tidss_plane.c           |   2 +-
 drivers/hid/hid-lenovo.c                      |  57 +++--
 drivers/hid/hid-multitouch.c                  |   4 +
 drivers/infiniband/core/device.c              |  37 +--
 drivers/infiniband/hw/mlx5/devx.c             |   2 +-
 drivers/infiniband/hw/mlx5/wr.c               |   2 +-
 drivers/infiniband/ulp/srpt/ib_srpt.c         |   3 +-
 drivers/input/keyboard/gpio_keys_polled.c     |  10 +-
 drivers/iommu/amd/init.c                      |   3 +
 drivers/iommu/intel/pasid.c                   |   3 +
 drivers/leds/leds-aw2013.c                    |   1 +
 drivers/leds/leds-sgm3140.c                   |   3 +
 drivers/md/dm-crypt.c                         |   4 +-
 drivers/md/dm-raid.c                          |   4 +-
 drivers/md/dm-verity.h                        |   4 +-
 drivers/md/dm.c                               |  26 +-
 drivers/md/md.c                               |  76 +++---
 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c |  52 +++-
 drivers/media/dvb-core/dvbdev.c               |   5 +
 drivers/media/dvb-frontends/stv0367.c         |  34 +--
 drivers/media/i2c/tc358743.c                  |   7 +-
 drivers/media/pci/ttpci/budget-av.c           |   8 +-
 drivers/media/platform/mtk-mdp/mtk_mdp_vpu.c  |   2 +-
 .../platform/mtk-vcodec/mtk_vcodec_fw_vpu.c   |  10 +-
 drivers/media/platform/mtk-vpu/mtk_vpu.c      |   2 +-
 drivers/media/platform/mtk-vpu/mtk_vpu.h      |   2 +-
 .../media/platform/sunxi/sun8i-di/sun8i-di.c  |  69 +++---
 drivers/media/usb/em28xx/em28xx-cards.c       |   4 +
 drivers/media/usb/go7007/go7007-driver.c      |   8 +-
 drivers/media/usb/go7007/go7007-usb.c         |   4 +-
 drivers/media/usb/pvrusb2/pvrusb2-context.c   |  10 +-
 drivers/media/usb/pvrusb2/pvrusb2-dvb.c       |   6 +-
 drivers/media/usb/pvrusb2/pvrusb2-v4l2.c      |  11 +-
 drivers/media/v4l2-core/v4l2-mem2mem.c        |  10 +-
 drivers/mfd/altera-sysmgr.c                   |   4 +-
 drivers/mfd/syscon.c                          |   4 +-
 drivers/mmc/host/wmt-sdmmc.c                  |   4 -
 drivers/mtd/maps/physmap-core.c               |   2 +-
 drivers/mtd/nand/raw/lpc32xx_mlc.c            |   5 +-
 drivers/net/dsa/mt7530.c                      |   8 +-
 drivers/net/ethernet/amazon/ena/ena_netdev.c  |  17 --
 .../net/ethernet/broadcom/bnx2x/bnx2x_cmn.h   |   6 +-
 .../hisilicon/hns3/hns3pf/hclge_main.c        |   5 +-
 drivers/net/ethernet/intel/igb/igb_main.c     | 112 ++++-----
 .../net/ethernet/marvell/octeontx2/af/cgx.c   |   2 +-
 .../net/ethernet/marvell/octeontx2/af/rvu.c   |  17 +-
 .../ethernet/netronome/nfp/flower/lag_conf.c  |   5 +
 drivers/net/phy/dp83822.c                     |  38 +--
 drivers/net/phy/phy_device.c                  |   2 +-
 drivers/net/usb/sr9800.c                      |   4 +-
 drivers/net/wireguard/receive.c               |   6 +-
 drivers/net/wireless/ath/ath10k/core.c        |   3 -
 drivers/net/wireless/ath/ath10k/sdio.c        |   1 -
 drivers/net/wireless/ath/ath10k/wmi-tlv.c     |   4 +
 drivers/net/wireless/ath/ath9k/htc.h          |   2 +-
 drivers/net/wireless/ath/ath9k/htc_drv_init.c |   4 +
 drivers/net/wireless/ath/ath9k/htc_drv_txrx.c |   4 -
 drivers/net/wireless/ath/ath9k/wmi.c          |  10 +-
 drivers/net/wireless/broadcom/b43/b43.h       |  16 ++
 drivers/net/wireless/broadcom/b43/dma.c       |   4 +-
 drivers/net/wireless/broadcom/b43/main.c      |  16 +-
 drivers/net/wireless/broadcom/b43/pio.c       |   6 +-
 .../broadcom/brcm80211/brcmsmac/phy/phy_cmn.c |   3 +-
 .../broadcom/brcm80211/brcmsmac/phy_shim.c    |   5 +-
 .../broadcom/brcm80211/brcmsmac/phy_shim.h    |   2 +-
 .../net/wireless/intel/iwlegacy/3945-mac.c    |   1 -
 .../net/wireless/intel/iwlegacy/4965-mac.c    |   1 -
 drivers/net/wireless/intel/iwlwifi/dvm/main.c |   1 -
 drivers/net/wireless/intel/iwlwifi/fw/acpi.c  |   2 +-
 .../net/wireless/intel/iwlwifi/iwl-dbg-tlv.c  |   6 +
 drivers/net/wireless/marvell/libertas/cmd.c   |  13 +-
 .../net/wireless/marvell/mwifiex/cfg80211.c   |   2 -
 .../net/wireless/marvell/mwifiex/debugfs.c    |   3 -
 drivers/net/wireless/marvell/mwifiex/main.c   |   2 -
 .../wireless/microchip/wilc1000/cfg80211.c    |   1 -
 drivers/net/wireless/microchip/wilc1000/hif.c |  40 +--
 .../net/wireless/microchip/wilc1000/netdev.c  |  29 +--
 drivers/net/wireless/quantenna/qtnfmac/core.c |   2 -
 .../wireless/quantenna/qtnfmac/pcie/pcie.c    |   2 -
 .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c |   1 +
 drivers/net/wireless/realtek/rtlwifi/pci.c    |   1 -
 drivers/net/wireless/realtek/rtw88/rtw8821c.c |   2 +-
 drivers/net/wireless/rndis_wlan.c             |   2 -
 drivers/net/wireless/st/cw1200/bh.c           |   2 -
 drivers/opp/debugfs.c                         |   6 +-
 drivers/pci/pci.h                             |   5 -
 drivers/pci/pcie/dpc.c                        |   2 +-
 drivers/pci/quirks.c                          |   1 +
 drivers/pci/switch/switchtec.c                |   4 +-
 drivers/pinctrl/mediatek/pinctrl-mt8192.c     |   1 -
 drivers/remoteproc/Kconfig                    |   2 +-
 drivers/remoteproc/remoteproc_core.c          |  32 +++
 drivers/remoteproc/remoteproc_internal.h      |  10 +
 drivers/remoteproc/stm32_rproc.c              | 151 ++++++-----
 drivers/rtc/Kconfig                           |   3 +-
 drivers/scsi/bfa/bfa.h                        |   9 +-
 drivers/scsi/bfa/bfa_core.c                   |   4 +-
 drivers/scsi/bfa/bfa_ioc.h                    |   8 +-
 drivers/scsi/bfa/bfad_bsg.c                   |  11 +-
 drivers/scsi/csiostor/csio_defs.h             |  18 +-
 drivers/scsi/csiostor/csio_lnode.c            |   8 +-
 drivers/scsi/csiostor/csio_lnode.h            |  13 -
 drivers/scsi/mpt3sas/mpt3sas_base.c           |   4 +-
 drivers/soc/fsl/dpio/dpio-service.c           |   2 +-
 drivers/spi/spi-mt65xx.c                      |  22 +-
 drivers/staging/greybus/light.c               |   8 +-
 .../staging/media/imx/imx-media-csc-scaler.c  |   1 +
 drivers/tty/serial/8250/8250_exar.c           |   5 +-
 drivers/tty/serial/max310x.c                  |   2 +-
 drivers/tty/serial/samsung_tty.c              |   5 +-
 drivers/tty/vt/vt.c                           |   2 +-
 drivers/usb/gadget/udc/net2272.c              |   2 +-
 drivers/video/backlight/da9052_bl.c           |   1 +
 drivers/video/backlight/lm3630a_bl.c          |  15 +-
 drivers/video/backlight/lm3639_bl.c           |   1 +
 drivers/video/backlight/lp8788_bl.c           |   1 +
 drivers/watchdog/stm32_iwdg.c                 |   3 +
 fs/afs/dir.c                                  |  10 -
 fs/btrfs/block-group.c                        |   3 +-
 fs/btrfs/block-group.h                        |   7 +
 fs/f2fs/file.c                                |  13 +-
 fs/fhandle.c                                  |   2 +-
 fs/nfs/nfs42.h                                |   7 +-
 fs/nfs/nfs4proc.c                             |  16 +-
 fs/nfs/nfsroot.c                              |   4 +-
 fs/quota/dquot.c                              | 226 ++++++++---------
 fs/select.c                                   |   2 +-
 include/drm/drm_fixed.h                       |   2 +-
 include/linux/blkdev.h                        |   1 +
 include/linux/bpf.h                           |   7 +-
 include/linux/filter.h                        |  21 +-
 include/linux/igmp.h                          |   4 +-
 include/linux/io_uring.h                      |  10 +-
 include/linux/mlx5/qp.h                       |   5 +-
 include/linux/mroute.h                        |   6 +-
 include/linux/pci.h                           |   5 +
 include/linux/poll.h                          |   4 -
 include/linux/rcupdate.h                      |  43 ++++
 include/linux/remoteproc.h                    |   6 +-
 include/net/compat.h                          |  27 +-
 include/uapi/linux/in.h                       |  42 +++-
 include/uapi/scsi/fc/fc_els.h                 | 114 ++++++++-
 io_uring/io_uring.c                           | 234 +-----------------
 kernel/bpf/cpumap.c                           |   3 +
 kernel/bpf/devmap.c                           |  27 +-
 kernel/bpf/hashtab.c                          |  14 +-
 kernel/bpf/helpers.c                          |  18 +-
 kernel/bpf/map_in_map.c                       |  11 +-
 kernel/bpf/stackmap.c                         |   9 +-
 kernel/bpf/syscall.c                          |  26 +-
 kernel/printk/printk.c                        |  34 +++
 kernel/rcu/tasks.h                            |   2 +
 kernel/time/timekeeping.c                     |  24 +-
 lib/test_blackhole_dev.c                      |   3 +-
 net/bluetooth/hci_core.c                      |   2 +-
 net/bluetooth/hci_event.c                     |   2 -
 net/bluetooth/rfcomm/core.c                   |   2 +-
 net/core/dev.c                                |   2 +-
 net/core/scm.c                                |   2 +-
 net/core/sock_diag.c                          |  10 +-
 net/hsr/hsr_framereg.c                        |   4 +
 net/hsr/hsr_main.c                            |  15 +-
 net/ipv4/igmp.c                               |  28 ++-
 net/ipv4/inet_diag.c                          |   6 +-
 net/ipv4/ip_sockglue.c                        | 100 ++++----
 net/ipv4/ip_tunnel.c                          |  15 +-
 net/ipv4/ipmr.c                               |  13 +-
 net/ipv4/tcp.c                                |   4 +-
 net/ipv4/udp.c                                |   4 +-
 net/ipv6/fib6_rules.c                         |   6 +
 net/ipv6/ipv6_sockglue.c                      |  18 +-
 net/iucv/iucv.c                               |   4 +-
 net/kcm/kcmsock.c                             |   3 +-
 net/l2tp/l2tp_ppp.c                           |   4 +-
 net/netfilter/nf_tables_api.c                 |   2 +-
 net/netfilter/nft_set_pipapo.c                |   5 +-
 net/packet/af_packet.c                        |   4 +-
 net/rds/send.c                                |   5 +-
 net/sunrpc/addr.c                             |   4 +-
 net/sunrpc/auth_gss/gss_rpc_xdr.c             |  27 +-
 net/unix/garbage.c                            |   2 +-
 net/unix/scm.c                                |   4 +-
 net/x25/af_x25.c                              |   4 +-
 scripts/clang-tools/gen_compile_commands.py   |   2 +-
 scripts/kconfig/lexer.l                       |   7 +-
 sound/core/seq/seq_midi.c                     |   8 +-
 sound/core/seq/seq_virmidi.c                  |   9 +-
 sound/pci/hda/patch_realtek.c                 |  63 +++++
 sound/soc/codecs/rt5645.c                     |  10 +
 sound/soc/codecs/wm8962.c                     |  29 ++-
 sound/soc/intel/boards/bytcr_rt5640.c         |  12 +
 sound/soc/meson/aiu.c                         |  49 +---
 sound/soc/meson/aiu.h                         |   1 -
 sound/soc/meson/axg-fifo.c                    |  16 +-
 sound/soc/meson/axg-pdm.c                     |  25 +-
 sound/soc/meson/axg-spdifin.c                 |  17 +-
 sound/soc/meson/axg-spdifout.c                |  17 +-
 sound/soc/meson/axg-tdm-formatter.c           |  50 +---
 sound/soc/meson/axg-tdm-interface.c           |  54 ++--
 sound/soc/meson/meson-card-utils.c            |   8 +-
 sound/soc/meson/t9015.c                       |  30 +--
 sound/usb/stream.c                            |   5 +-
 tools/bpf/bpftool/prog.c                      |   2 +-
 tools/perf/builtin-record.c                   |   2 +-
 tools/perf/util/evsel.c                       |   1 -
 tools/perf/util/stat-display.c                |   2 +-
 tools/perf/util/thread_map.c                  |   2 +-
 tools/testing/selftests/net/tls.c             |   8 +-
 268 files changed, 1962 insertions(+), 1550 deletions(-)

-- 
2.43.0

[PATCH 5.10 001/238] io_uring/unix: drop usage of io_uring socket

[Sasha Levin]

From: Jens Axboe <axboe@kernel.dk>

Commit a4104821ad651d8a0b374f0b2474c345bbb42f82 upstream.

Since we no longer allow sending io_uring fds over SCM_RIGHTS, move to
using io_is_uring_fops() to detect whether this is a io_uring fd or not.
With that done, kill off io_uring_get_socket() as nobody calls it
anymore.

This is in preparation to yanking out the rest of the core related to
unix gc with io_uring.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/io_uring.h | 10 +++++-----
 io_uring/io_uring.c      | 18 +++++-------------
 net/core/scm.c           |  2 +-
 net/unix/scm.c           |  4 +---
 4 files changed, 12 insertions(+), 22 deletions(-)

diff --git a/include/linux/io_uring.h b/include/linux/io_uring.h
index 649a4d7c241bc..55d09f594cd14 100644
--- a/include/linux/io_uring.h
+++ b/include/linux/io_uring.h
@@ -6,9 +6,9 @@
 #include <linux/xarray.h>
 
 #if defined(CONFIG_IO_URING)
-struct sock *io_uring_get_socket(struct file *file);
 void __io_uring_cancel(bool cancel_all);
 void __io_uring_free(struct task_struct *tsk);
+bool io_is_uring_fops(struct file *file);
 
 static inline void io_uring_files_cancel(void)
 {
@@ -26,10 +26,6 @@ static inline void io_uring_free(struct task_struct *tsk)
 		__io_uring_free(tsk);
 }
 #else
-static inline struct sock *io_uring_get_socket(struct file *file)
-{
-	return NULL;
-}
 static inline void io_uring_task_cancel(void)
 {
 }
@@ -39,6 +35,10 @@ static inline void io_uring_files_cancel(void)
 static inline void io_uring_free(struct task_struct *tsk)
 {
 }
+static inline bool io_is_uring_fops(struct file *file)
+{
+	return false;
+}
 #endif
 
 #endif
diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c
index 936abc6ee450c..a80c808d3a0ef 100644
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -1113,19 +1113,6 @@ static struct kmem_cache *req_cachep;
 
 static const struct file_operations io_uring_fops;
 
-struct sock *io_uring_get_socket(struct file *file)
-{
-#if defined(CONFIG_UNIX)
-	if (file->f_op == &io_uring_fops) {
-		struct io_ring_ctx *ctx = file->private_data;
-
-		return ctx->ring_sock->sk;
-	}
-#endif
-	return NULL;
-}
-EXPORT_SYMBOL(io_uring_get_socket);
-
 static inline void io_tw_lock(struct io_ring_ctx *ctx, bool *locked)
 {
 	if (!*locked) {
@@ -10275,6 +10262,11 @@ static const struct file_operations io_uring_fops = {
 #endif
 };
 
+bool io_is_uring_fops(struct file *file)
+{
+	return file->f_op == &io_uring_fops;
+}
+
 static int io_allocate_scq_urings(struct io_ring_ctx *ctx,
 				  struct io_uring_params *p)
 {
diff --git a/net/core/scm.c b/net/core/scm.c
index 3c7f160720d34..d09849cb60f08 100644
--- a/net/core/scm.c
+++ b/net/core/scm.c
@@ -105,7 +105,7 @@ static int scm_fp_copy(struct cmsghdr *cmsg, struct scm_fp_list **fplp)
 		if (fd < 0 || !(file = fget_raw(fd)))
 			return -EBADF;
 		/* don't allow io_uring files */
-		if (io_uring_get_socket(file)) {
+		if (io_is_uring_fops(file)) {
 			fput(file);
 			return -EINVAL;
 		}
diff --git a/net/unix/scm.c b/net/unix/scm.c
index e8e2a00bb0f58..d1048b4c2baaf 100644
--- a/net/unix/scm.c
+++ b/net/unix/scm.c
@@ -34,10 +34,8 @@ struct sock *unix_get_socket(struct file *filp)
 		/* PF_UNIX ? */
 		if (s && sock->ops && sock->ops->family == PF_UNIX)
 			u_sock = s;
-	} else {
-		/* Could be an io_uring instance */
-		u_sock = io_uring_get_socket(filp);
 	}
+
 	return u_sock;
 }
 EXPORT_SYMBOL(unix_get_socket);
-- 
2.43.0

[PATCH 5.10 002/238] io_uring: drop any code related to SCM_RIGHTS

[Sasha Levin]

From: Jens Axboe <axboe@kernel.dk>

Commit 6e5e6d274956305f1fc0340522b38f5f5be74bdb upstream.

This is dead code after we dropped support for passing io_uring fds
over SCM_RIGHTS, get rid of it.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 io_uring/io_uring.c | 211 +-------------------------------------------
 1 file changed, 3 insertions(+), 208 deletions(-)

diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c
index a80c808d3a0ef..67a355f27ad80 100644
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -62,7 +62,6 @@
 #include <linux/net.h>
 #include <net/sock.h>
 #include <net/af_unix.h>
-#include <net/scm.h>
 #include <linux/anon_inodes.h>
 #include <linux/sched/mm.h>
 #include <linux/uaccess.h>
@@ -440,9 +439,6 @@ struct io_ring_ctx {
 
 	/* Keep this last, we don't need it for the fast path */
 	struct {
-		#if defined(CONFIG_UNIX)
-			struct socket		*ring_sock;
-		#endif
 		/* hashed buffered write serialization */
 		struct io_wq_hash		*hash_map;
 
@@ -7976,15 +7972,6 @@ static void io_free_file_tables(struct io_file_table *table)
 
 static void __io_sqe_files_unregister(struct io_ring_ctx *ctx)
 {
-#if defined(CONFIG_UNIX)
-	if (ctx->ring_sock) {
-		struct sock *sock = ctx->ring_sock->sk;
-		struct sk_buff *skb;
-
-		while ((skb = skb_dequeue(&sock->sk_receive_queue)) != NULL)
-			kfree_skb(skb);
-	}
-#else
 	int i;
 
 	for (i = 0; i < ctx->nr_user_files; i++) {
@@ -7994,7 +7981,6 @@ static void __io_sqe_files_unregister(struct io_ring_ctx *ctx)
 		if (file)
 			fput(file);
 	}
-#endif
 	io_free_file_tables(&ctx->file_table);
 	io_rsrc_data_free(ctx->file_data);
 	ctx->file_data = NULL;
@@ -8146,170 +8132,11 @@ static struct io_sq_data *io_get_sq_data(struct io_uring_params *p,
 	return sqd;
 }
 
-#if defined(CONFIG_UNIX)
-/*
- * Ensure the UNIX gc is aware of our file set, so we are certain that
- * the io_uring can be safely unregistered on process exit, even if we have
- * loops in the file referencing.
- */
-static int __io_sqe_files_scm(struct io_ring_ctx *ctx, int nr, int offset)
-{
-	struct sock *sk = ctx->ring_sock->sk;
-	struct scm_fp_list *fpl;
-	struct sk_buff *skb;
-	int i, nr_files;
-
-	fpl = kzalloc(sizeof(*fpl), GFP_KERNEL);
-	if (!fpl)
-		return -ENOMEM;
-
-	skb = alloc_skb(0, GFP_KERNEL);
-	if (!skb) {
-		kfree(fpl);
-		return -ENOMEM;
-	}
-
-	skb->sk = sk;
-	skb->scm_io_uring = 1;
-
-	nr_files = 0;
-	fpl->user = get_uid(current_user());
-	for (i = 0; i < nr; i++) {
-		struct file *file = io_file_from_index(ctx, i + offset);
-
-		if (!file)
-			continue;
-		fpl->fp[nr_files] = get_file(file);
-		unix_inflight(fpl->user, fpl->fp[nr_files]);
-		nr_files++;
-	}
-
-	if (nr_files) {
-		fpl->max = SCM_MAX_FD;
-		fpl->count = nr_files;
-		UNIXCB(skb).fp = fpl;
-		skb->destructor = unix_destruct_scm;
-		refcount_add(skb->truesize, &sk->sk_wmem_alloc);
-		skb_queue_head(&sk->sk_receive_queue, skb);
-
-		for (i = 0; i < nr; i++) {
-			struct file *file = io_file_from_index(ctx, i + offset);
-
-			if (file)
-				fput(file);
-		}
-	} else {
-		kfree_skb(skb);
-		free_uid(fpl->user);
-		kfree(fpl);
-	}
-
-	return 0;
-}
-
-/*
- * If UNIX sockets are enabled, fd passing can cause a reference cycle which
- * causes regular reference counting to break down. We rely on the UNIX
- * garbage collection to take care of this problem for us.
- */
-static int io_sqe_files_scm(struct io_ring_ctx *ctx)
-{
-	unsigned left, total;
-	int ret = 0;
-
-	total = 0;
-	left = ctx->nr_user_files;
-	while (left) {
-		unsigned this_files = min_t(unsigned, left, SCM_MAX_FD);
-
-		ret = __io_sqe_files_scm(ctx, this_files, total);
-		if (ret)
-			break;
-		left -= this_files;
-		total += this_files;
-	}
-
-	if (!ret)
-		return 0;
-
-	while (total < ctx->nr_user_files) {
-		struct file *file = io_file_from_index(ctx, total);
-
-		if (file)
-			fput(file);
-		total++;
-	}
-
-	return ret;
-}
-#else
-static int io_sqe_files_scm(struct io_ring_ctx *ctx)
-{
-	return 0;
-}
-#endif
-
 static void io_rsrc_file_put(struct io_ring_ctx *ctx, struct io_rsrc_put *prsrc)
 {
 	struct file *file = prsrc->file;
-#if defined(CONFIG_UNIX)
-	struct sock *sock = ctx->ring_sock->sk;
-	struct sk_buff_head list, *head = &sock->sk_receive_queue;
-	struct sk_buff *skb;
-	int i;
 
-	__skb_queue_head_init(&list);
-
-	/*
-	 * Find the skb that holds this file in its SCM_RIGHTS. When found,
-	 * remove this entry and rearrange the file array.
-	 */
-	skb = skb_dequeue(head);
-	while (skb) {
-		struct scm_fp_list *fp;
-
-		fp = UNIXCB(skb).fp;
-		for (i = 0; i < fp->count; i++) {
-			int left;
-
-			if (fp->fp[i] != file)
-				continue;
-
-			unix_notinflight(fp->user, fp->fp[i]);
-			left = fp->count - 1 - i;
-			if (left) {
-				memmove(&fp->fp[i], &fp->fp[i + 1],
-						left * sizeof(struct file *));
-			}
-			fp->count--;
-			if (!fp->count) {
-				kfree_skb(skb);
-				skb = NULL;
-			} else {
-				__skb_queue_tail(&list, skb);
-			}
-			fput(file);
-			file = NULL;
-			break;
-		}
-
-		if (!file)
-			break;
-
-		__skb_queue_tail(&list, skb);
-
-		skb = skb_dequeue(head);
-	}
-
-	if (skb_peek(&list)) {
-		spin_lock_irq(&head->lock);
-		while ((skb = __skb_dequeue(&list)) != NULL)
-			__skb_queue_tail(head, skb);
-		spin_unlock_irq(&head->lock);
-	}
-#else
 	fput(file);
-#endif
 }
 
 static void __io_rsrc_put_work(struct io_rsrc_node *ref_node)
@@ -8420,12 +8247,6 @@ static int io_sqe_files_register(struct io_ring_ctx *ctx, void __user *arg,
 		io_fixed_file_set(io_fixed_file_slot(&ctx->file_table, i), file);
 	}
 
-	ret = io_sqe_files_scm(ctx);
-	if (ret) {
-		__io_sqe_files_unregister(ctx);
-		return ret;
-	}
-
 	io_rsrc_node_switch(ctx, NULL);
 	return ret;
 out_fput:
@@ -9382,12 +9203,6 @@ static void io_ring_ctx_free(struct io_ring_ctx *ctx)
 	WARN_ON_ONCE(!list_empty(&ctx->rsrc_ref_list));
 	WARN_ON_ONCE(!llist_empty(&ctx->rsrc_put_llist));
 
-#if defined(CONFIG_UNIX)
-	if (ctx->ring_sock) {
-		ctx->ring_sock->file = NULL; /* so that iput() is called */
-		sock_release(ctx->ring_sock);
-	}
-#endif
 	WARN_ON_ONCE(!list_empty(&ctx->ltimeout_list));
 
 	if (ctx->mm_account) {
@@ -10329,32 +10144,12 @@ static int io_uring_install_fd(struct io_ring_ctx *ctx, struct file *file)
 /*
  * Allocate an anonymous fd, this is what constitutes the application
  * visible backing of an io_uring instance. The application mmaps this
- * fd to gain access to the SQ/CQ ring details. If UNIX sockets are enabled,
- * we have to tie this fd to a socket for file garbage collection purposes.
+ * fd to gain access to the SQ/CQ ring details.
  */
 static struct file *io_uring_get_file(struct io_ring_ctx *ctx)
 {
-	struct file *file;
-#if defined(CONFIG_UNIX)
-	int ret;
-
-	ret = sock_create_kern(&init_net, PF_UNIX, SOCK_RAW, IPPROTO_IP,
-				&ctx->ring_sock);
-	if (ret)
-		return ERR_PTR(ret);
-#endif
-
-	file = anon_inode_getfile("[io_uring]", &io_uring_fops, ctx,
-					O_RDWR | O_CLOEXEC);
-#if defined(CONFIG_UNIX)
-	if (IS_ERR(file)) {
-		sock_release(ctx->ring_sock);
-		ctx->ring_sock = NULL;
-	} else {
-		ctx->ring_sock->file = file;
-	}
-#endif
-	return file;
+	return anon_inode_getfile("[io_uring]", &io_uring_fops, ctx,
+				  O_RDWR | O_CLOEXEC);
 }
 
 static int io_uring_create(unsigned entries, struct io_uring_params *p,
-- 
2.43.0

[PATCH 5.10 003/238] rcu-tasks: Provide rcu_trace_implies_rcu_gp()

[Sasha Levin]

From: "Paul E. McKenney" <paulmck@kernel.org>

[ Upstream commit e6c86c513f440bec5f1046539c7e3c6c653842da ]

As an accident of implementation, an RCU Tasks Trace grace period also
acts as an RCU grace period.  However, this could change at any time.
This commit therefore creates an rcu_trace_implies_rcu_gp() that currently
returns true to codify this accident.  Code relying on this accident
must call this function to verify that this accident is still happening.

Reported-by: Hou Tao <houtao@huaweicloud.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Link: https://lore.kernel.org/r/20221014113946.965131-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 876673364161 ("bpf: Defer the free of inner map when necessary")
Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 10108826191ab30388e8ae9d54505a628f78a7ec)
Signed-off-by: Robert Kolchmeyer <rkolchmeyer@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/rcupdate.h | 12 ++++++++++++
 kernel/rcu/tasks.h       |  2 ++
 2 files changed, 14 insertions(+)

diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 8716a17063518..0122c03da24af 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -201,6 +201,18 @@ static inline void exit_tasks_rcu_stop(void) { }
 static inline void exit_tasks_rcu_finish(void) { }
 #endif /* #else #ifdef CONFIG_TASKS_RCU_GENERIC */
 
+/**
+ * rcu_trace_implies_rcu_gp - does an RCU Tasks Trace grace period imply an RCU grace period?
+ *
+ * As an accident of implementation, an RCU Tasks Trace grace period also
+ * acts as an RCU grace period.  However, this could change at any time.
+ * Code relying on this accident must call this function to verify that
+ * this accident is still happening.
+ *
+ * You have been warned!
+ */
+static inline bool rcu_trace_implies_rcu_gp(void) { return true; }
+
 /**
  * cond_resched_tasks_rcu_qs - Report potential quiescent states to RCU
  *
diff --git a/kernel/rcu/tasks.h b/kernel/rcu/tasks.h
index c5624ab0580c5..105fdc2bb004c 100644
--- a/kernel/rcu/tasks.h
+++ b/kernel/rcu/tasks.h
@@ -1015,6 +1015,8 @@ static void rcu_tasks_trace_postscan(struct list_head *hop)
 
 	// Wait for late-stage exiting tasks to finish exiting.
 	// These might have passed the call to exit_tasks_rcu_finish().
+
+	// If you remove the following line, update rcu_trace_implies_rcu_gp()!!!
 	synchronize_rcu();
 	// Any tasks that exit after this point will set ->trc_reader_checked.
 }
-- 
2.43.0

[PATCH 5.10 004/238] bpf: Defer the free of inner map when necessary

[Sasha Levin]

From: Hou Tao <houtao1@huawei.com>

[ Upstream commit 876673364161da50eed6b472d746ef88242b2368 ]

When updating or deleting an inner map in map array or map htab, the map
may still be accessed by non-sleepable program or sleepable program.
However bpf_map_fd_put_ptr() decreases the ref-counter of the inner map
directly through bpf_map_put(), if the ref-counter is the last one
(which is true for most cases), the inner map will be freed by
ops->map_free() in a kworker. But for now, most .map_free() callbacks
don't use synchronize_rcu() or its variants to wait for the elapse of a
RCU grace period, so after the invocation of ops->map_free completes,
the bpf program which is accessing the inner map may incur
use-after-free problem.

Fix the free of inner map by invoking bpf_map_free_deferred() after both
one RCU grace period and one tasks trace RCU grace period if the inner
map has been removed from the outer map before. The deferment is
accomplished by using call_rcu() or call_rcu_tasks_trace() when
releasing the last ref-counter of bpf map. The newly-added rcu_head
field in bpf_map shares the same storage space with work field to
reduce the size of bpf_map.

Fixes: bba1dc0b55ac ("bpf: Remove redundant synchronize_rcu.")
Fixes: 638e4b825d52 ("bpf: Allows per-cpu maps and map-in-map in sleepable programs")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231204140425.1480317-5-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 62fca83303d608ad4fec3f7428c8685680bb01b0)
Signed-off-by: Robert Kolchmeyer <rkolchmeyer@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/bpf.h     |  7 ++++++-
 kernel/bpf/map_in_map.c | 11 ++++++++---
 kernel/bpf/syscall.c    | 26 ++++++++++++++++++++++++--
 3 files changed, 38 insertions(+), 6 deletions(-)

diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index bfdf40be5360a..a75faf437e750 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -175,9 +175,14 @@ struct bpf_map {
 	 */
 	atomic64_t refcnt ____cacheline_aligned;
 	atomic64_t usercnt;
-	struct work_struct work;
+	/* rcu is used before freeing and work is only used during freeing */
+	union {
+		struct work_struct work;
+		struct rcu_head rcu;
+	};
 	struct mutex freeze_mutex;
 	atomic64_t writecnt;
+	bool free_after_mult_rcu_gp;
 };
 
 static inline bool map_value_has_spin_lock(const struct bpf_map *map)
diff --git a/kernel/bpf/map_in_map.c b/kernel/bpf/map_in_map.c
index 0cf4cb6858105..caa1a17cbae15 100644
--- a/kernel/bpf/map_in_map.c
+++ b/kernel/bpf/map_in_map.c
@@ -102,10 +102,15 @@ void *bpf_map_fd_get_ptr(struct bpf_map *map,
 
 void bpf_map_fd_put_ptr(struct bpf_map *map, void *ptr, bool need_defer)
 {
-	/* ptr->ops->map_free() has to go through one
-	 * rcu grace period by itself.
+	struct bpf_map *inner_map = ptr;
+
+	/* The inner map may still be used by both non-sleepable and sleepable
+	 * bpf program, so free it after one RCU grace period and one tasks
+	 * trace RCU grace period.
 	 */
-	bpf_map_put(ptr);
+	if (need_defer)
+		WRITE_ONCE(inner_map->free_after_mult_rcu_gp, true);
+	bpf_map_put(inner_map);
 }
 
 u32 bpf_map_fd_sys_lookup_elem(void *ptr)
diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index 16affa09db5c9..e1bee8cd34044 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -493,6 +493,25 @@ static void bpf_map_put_uref(struct bpf_map *map)
 	}
 }
 
+static void bpf_map_free_in_work(struct bpf_map *map)
+{
+	INIT_WORK(&map->work, bpf_map_free_deferred);
+	schedule_work(&map->work);
+}
+
+static void bpf_map_free_rcu_gp(struct rcu_head *rcu)
+{
+	bpf_map_free_in_work(container_of(rcu, struct bpf_map, rcu));
+}
+
+static void bpf_map_free_mult_rcu_gp(struct rcu_head *rcu)
+{
+	if (rcu_trace_implies_rcu_gp())
+		bpf_map_free_rcu_gp(rcu);
+	else
+		call_rcu(rcu, bpf_map_free_rcu_gp);
+}
+
 /* decrement map refcnt and schedule it for freeing via workqueue
  * (unrelying map implementation ops->map_free() might sleep)
  */
@@ -502,8 +521,11 @@ static void __bpf_map_put(struct bpf_map *map, bool do_idr_lock)
 		/* bpf_map_free_id() must be called first */
 		bpf_map_free_id(map, do_idr_lock);
 		btf_put(map->btf);
-		INIT_WORK(&map->work, bpf_map_free_deferred);
-		schedule_work(&map->work);
+
+		if (READ_ONCE(map->free_after_mult_rcu_gp))
+			call_rcu_tasks_trace(&map->rcu, bpf_map_free_mult_rcu_gp);
+		else
+			bpf_map_free_in_work(map);
 	}
 }
 
-- 
2.43.0

[PATCH 5.10 005/238] btrfs: add and use helper to check if block group is used

[Sasha Levin]

From: Filipe Manana <fdmanana@suse.com>

[ Upstream commit 1693d5442c458ae8d5b0d58463b873cd879569ed ]

Add a helper function to determine if a block group is being used and make
use of it at btrfs_delete_unused_bgs(). This helper will also be used in
future code changes.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/block-group.c | 3 +--
 fs/btrfs/block-group.h | 7 +++++++
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/block-group.c b/fs/btrfs/block-group.c
index c4e3c1a5de059..9a7c7e0f7c233 100644
--- a/fs/btrfs/block-group.c
+++ b/fs/btrfs/block-group.c
@@ -1393,8 +1393,7 @@ void btrfs_delete_unused_bgs(struct btrfs_fs_info *fs_info)
 		}
 
 		spin_lock(&block_group->lock);
-		if (block_group->reserved || block_group->pinned ||
-		    block_group->used || block_group->ro ||
+		if (btrfs_is_block_group_used(block_group) || block_group->ro ||
 		    list_is_singular(&block_group->list)) {
 			/*
 			 * We want to bail if we made new allocations or have
diff --git a/fs/btrfs/block-group.h b/fs/btrfs/block-group.h
index 4c7614346f724..0d02b75f9e7e3 100644
--- a/fs/btrfs/block-group.h
+++ b/fs/btrfs/block-group.h
@@ -196,6 +196,13 @@ static inline u64 btrfs_block_group_end(struct btrfs_block_group *block_group)
 	return (block_group->start + block_group->length);
 }
 
+static inline bool btrfs_is_block_group_used(const struct btrfs_block_group *bg)
+{
+	lockdep_assert_held(&bg->lock);
+
+	return (bg->used > 0 || bg->reserved > 0 || bg->pinned > 0);
+}
+
 static inline bool btrfs_is_block_group_data_only(
 					struct btrfs_block_group *block_group)
 {
-- 
2.43.0

[PATCH 5.10 006/238] selftests: tls: use exact comparison in recv_partial

[Sasha Levin]

From: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 49d821064c44cb5ffdf272905236012ea9ce50e3 ]

This exact case was fail for async crypto and we weren't
catching it.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/net/tls.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/tools/testing/selftests/net/tls.c b/tools/testing/selftests/net/tls.c
index 44a25a9f1f722..956ee3c01dd1a 100644
--- a/tools/testing/selftests/net/tls.c
+++ b/tools/testing/selftests/net/tls.c
@@ -653,12 +653,12 @@ TEST_F(tls, recv_partial)
 
 	memset(recv_mem, 0, sizeof(recv_mem));
 	EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len);
-	EXPECT_NE(recv(self->cfd, recv_mem, strlen(test_str_first),
-		       MSG_WAITALL), -1);
+	EXPECT_EQ(recv(self->cfd, recv_mem, strlen(test_str_first),
+		       MSG_WAITALL), strlen(test_str_first));
 	EXPECT_EQ(memcmp(test_str_first, recv_mem, strlen(test_str_first)), 0);
 	memset(recv_mem, 0, sizeof(recv_mem));
-	EXPECT_NE(recv(self->cfd, recv_mem, strlen(test_str_second),
-		       MSG_WAITALL), -1);
+	EXPECT_EQ(recv(self->cfd, recv_mem, strlen(test_str_second),
+		       MSG_WAITALL), strlen(test_str_second));
 	EXPECT_EQ(memcmp(test_str_second, recv_mem, strlen(test_str_second)),
 		  0);
 }
-- 
2.43.0

[PATCH 5.10 007/238] ASoC: rt5645: Make LattePanda board DMI match more precise

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 551539a8606e28cb2a130f8ef3e9834235b456c4 ]

The DMI strings used for the LattePanda board DMI quirks are very generic.

Using the dmidecode database from https://linux-hardware.org/ shows
that the chosen DMI strings also match the following 2 laptops
which also have a rt5645 codec:

Insignia NS-P11W7100 https://linux-hardware.org/?computer=E092FFF8BA04
Insignia NS-P10W8100 https://linux-hardware.org/?computer=AFB6C0BF7934

All 4 hw revisions of the LattePanda board have "S70CR" in their BIOS
version DMI strings:

DF-BI-7-S70CR100-*
DF-BI-7-S70CR110-*
DF-BI-7-S70CR200-*
LP-BS-7-S70CR700-*

See e.g. https://linux-hardware.org/?computer=D98250A817C0

Add a partial (non exact) DMI match on this string to make the LattePanda
board DMI match more precise to avoid false-positive matches.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20240211212736.179605-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5645.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c
index 04457cbed5b4e..5db63ef33f1a2 100644
--- a/sound/soc/codecs/rt5645.c
+++ b/sound/soc/codecs/rt5645.c
@@ -3772,6 +3772,16 @@ static const struct dmi_system_id dmi_platform_data[] = {
 		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
 		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
 		  DMI_EXACT_MATCH(DMI_BOARD_VERSION, "Default string"),
+		  /*
+		   * Above strings are too generic, LattePanda BIOS versions for
+		   * all 4 hw revisions are:
+		   * DF-BI-7-S70CR100-*
+		   * DF-BI-7-S70CR110-*
+		   * DF-BI-7-S70CR200-*
+		   * LP-BS-7-S70CR700-*
+		   * Do a partial match for S70CR to avoid false positive matches.
+		   */
+		  DMI_MATCH(DMI_BIOS_VERSION, "S70CR"),
 		},
 		.driver_data = (void *)&lattepanda_board_platform_data,
 	},
-- 
2.43.0

[PATCH 5.10 008/238] x86/xen: Add some null pointer checking to smp.c

[Sasha Levin]

From: Kunwu Chan <chentao@kylinos.cn>

[ Upstream commit 3693bb4465e6e32a204a5b86d3ec7e6b9f7e67c2 ]

kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.

Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401161119.iof6BQsf-lkp@intel.com/
Suggested-by: Markus Elfring <Markus.Elfring@web.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240119094948.275390-1-chentao@kylinos.cn
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/xen/smp.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index cdec892b28e2e..a641e0d452194 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -65,6 +65,8 @@ int xen_smp_intr_init(unsigned int cpu)
 	char *resched_name, *callfunc_name, *debug_name;
 
 	resched_name = kasprintf(GFP_KERNEL, "resched%d", cpu);
+	if (!resched_name)
+		goto fail_mem;
 	per_cpu(xen_resched_irq, cpu).name = resched_name;
 	rc = bind_ipi_to_irqhandler(XEN_RESCHEDULE_VECTOR,
 				    cpu,
@@ -77,6 +79,8 @@ int xen_smp_intr_init(unsigned int cpu)
 	per_cpu(xen_resched_irq, cpu).irq = rc;
 
 	callfunc_name = kasprintf(GFP_KERNEL, "callfunc%d", cpu);
+	if (!callfunc_name)
+		goto fail_mem;
 	per_cpu(xen_callfunc_irq, cpu).name = callfunc_name;
 	rc = bind_ipi_to_irqhandler(XEN_CALL_FUNCTION_VECTOR,
 				    cpu,
@@ -90,6 +94,9 @@ int xen_smp_intr_init(unsigned int cpu)
 
 	if (!xen_fifo_events) {
 		debug_name = kasprintf(GFP_KERNEL, "debug%d", cpu);
+		if (!debug_name)
+			goto fail_mem;
+
 		per_cpu(xen_debug_irq, cpu).name = debug_name;
 		rc = bind_virq_to_irqhandler(VIRQ_DEBUG, cpu,
 					     xen_debug_interrupt,
@@ -101,6 +108,9 @@ int xen_smp_intr_init(unsigned int cpu)
 	}
 
 	callfunc_name = kasprintf(GFP_KERNEL, "callfuncsingle%d", cpu);
+	if (!callfunc_name)
+		goto fail_mem;
+
 	per_cpu(xen_callfuncsingle_irq, cpu).name = callfunc_name;
 	rc = bind_ipi_to_irqhandler(XEN_CALL_FUNCTION_SINGLE_VECTOR,
 				    cpu,
@@ -114,6 +124,8 @@ int xen_smp_intr_init(unsigned int cpu)
 
 	return 0;
 
+ fail_mem:
+	rc = -ENOMEM;
  fail:
 	xen_smp_intr_free(cpu);
 	return rc;
-- 
2.43.0

[PATCH 5.10 009/238] MIPS: Clear Cause.BD in instruction_pointer_set

[Sasha Levin]

From: Jiaxun Yang <jiaxun.yang@flygoat.com>

[ Upstream commit 9d6e21ddf20293b3880ae55b9d14de91c5891c59 ]

Clear Cause.BD after we use instruction_pointer_set to override
EPC.

This can prevent exception_epc check against instruction code at
new return address.
It won't be considered as "in delay slot" after epc being overridden
anyway.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/asm/ptrace.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
index 1e76774b36ddf..2849a9b65a055 100644
--- a/arch/mips/include/asm/ptrace.h
+++ b/arch/mips/include/asm/ptrace.h
@@ -60,6 +60,7 @@ static inline void instruction_pointer_set(struct pt_regs *regs,
                                            unsigned long val)
 {
 	regs->cp0_epc = val;
+	regs->cp0_cause &= ~CAUSEF_BD;
 }
 
 /* Query offset/name of register from its name/offset */
-- 
2.43.0

[PATCH 5.10 010/238] HID: multitouch: Add required quirk for Synaptics 0xcddc device

[Sasha Levin]

From: Manuel Fombuena <fombuena@outlook.com>

[ Upstream commit 1741a8269e1c51fa08d4bfdf34667387a6eb10ec ]

Add support for the pointing stick (Accupoint) and 2 mouse buttons.

Present on some Toshiba/dynabook Portege X30 and X40 laptops.

It should close https://bugzilla.kernel.org/show_bug.cgi?id=205817

Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-multitouch.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 7d43d62df2409..8dcd636daf270 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -2067,6 +2067,10 @@ static const struct hid_device_id mt_devices[] = {
 		HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8,
 			USB_VENDOR_ID_SYNAPTICS, 0xcd7e) },
 
+	{ .driver_data = MT_CLS_WIN_8_FORCE_MULTI_INPUT,
+		HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8,
+			USB_VENDOR_ID_SYNAPTICS, 0xcddc) },
+
 	{ .driver_data = MT_CLS_WIN_8_FORCE_MULTI_INPUT,
 		HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8,
 			USB_VENDOR_ID_SYNAPTICS, 0xce08) },
-- 
2.43.0

[PATCH 5.10 011/238] gen_compile_commands: fix invalid escape sequence warning

[Sasha Levin]

From: Andrew Ballance <andrewjballance@gmail.com>

[ Upstream commit dae4a0171e25884787da32823b3081b4c2acebb2 ]

With python 3.12, '\#' results in this warning
    SyntaxWarning: invalid escape sequence '\#'

Signed-off-by: Andrew Ballance <andrewjballance@gmail.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/clang-tools/gen_compile_commands.py | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/clang-tools/gen_compile_commands.py b/scripts/clang-tools/gen_compile_commands.py
index 8bf55bb4f515c..96e4865ee934d 100755
--- a/scripts/clang-tools/gen_compile_commands.py
+++ b/scripts/clang-tools/gen_compile_commands.py
@@ -176,7 +176,7 @@ def process_line(root_directory, command_prefix, file_path):
     # escape the pound sign '#', either as '\#' or '$(pound)' (depending on the
     # kernel version). The compile_commands.json file is not interepreted
     # by Make, so this code replaces the escaped version with '#'.
-    prefix = command_prefix.replace('\#', '#').replace('$(pound)', '#')
+    prefix = command_prefix.replace(r'\#', '#').replace('$(pound)', '#')
 
     # Use os.path.abspath() to normalize the path resolving '.' and '..' .
     abs_path = os.path.abspath(os.path.join(root_directory, file_path))
-- 
2.43.0

[PATCH 5.10 012/238] RDMA/mlx5: Fix fortify source warning while accessing Eth segment

[Sasha Levin]

From: Leon Romanovsky <leonro@nvidia.com>

[ Upstream commit 4d5e86a56615cc387d21c629f9af8fb0e958d350 ]

 ------------[ cut here ]------------
 memcpy: detected field-spanning write (size 56) of single field "eseg->inline_hdr.start" at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 (size 2)
 WARNING: CPU: 0 PID: 293779 at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
 Modules linked in: 8021q garp mrp stp llc rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) ib_core(OE) mlx5_core(OE) pci_hyperv_intf mlxdevm(OE) mlx_compat(OE) tls mlxfw(OE) psample nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink mst_pciconf(OE) knem(OE) vfio_pci vfio_pci_core vfio_iommu_type1 vfio iommufd irqbypass cuse nfsv3 nfs fscache netfs xfrm_user xfrm_algo ipmi_devintf ipmi_msghandler binfmt_misc crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 snd_pcsp aesni_intel crypto_simd cryptd snd_pcm snd_timer joydev snd soundcore input_leds serio_raw evbug nfsd auth_rpcgss nfs_acl lockd grace sch_fq_codel sunrpc drm efi_pstore ip_tables x_tables autofs4 psmouse virtio_net net_failover failover floppy
  [last unloaded: mlx_compat(OE)]
 CPU: 0 PID: 293779 Comm: ssh Tainted: G           OE      6.2.0-32-generic #32~22.04.1-Ubuntu
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
 Code: 0c 01 00 a8 01 75 25 48 8b 75 a0 b9 02 00 00 00 48 c7 c2 10 5b fd c0 48 c7 c7 80 5b fd c0 c6 05 57 0c 03 00 01 e8 95 4d 93 da <0f> 0b 44 8b 4d b0 4c 8b 45 c8 48 8b 4d c0 e9 49 fb ff ff 41 0f b7
 RSP: 0018:ffffb5b48478b570 EFLAGS: 00010046
 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
 RBP: ffffb5b48478b628 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: ffffb5b48478b5e8
 R13: ffff963a3c609b5e R14: ffff9639c3fbd800 R15: ffffb5b480475a80
 FS:  00007fc03b444c80(0000) GS:ffff963a3dc00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000556f46bdf000 CR3: 0000000006ac6003 CR4: 00000000003706f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  ? show_regs+0x72/0x90
  ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
  ? __warn+0x8d/0x160
  ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
  ? report_bug+0x1bb/0x1d0
  ? handle_bug+0x46/0x90
  ? exc_invalid_op+0x19/0x80
  ? asm_exc_invalid_op+0x1b/0x20
  ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
  mlx5_ib_post_send_nodrain+0xb/0x20 [mlx5_ib]
  ipoib_send+0x2ec/0x770 [ib_ipoib]
  ipoib_start_xmit+0x5a0/0x770 [ib_ipoib]
  dev_hard_start_xmit+0x8e/0x1e0
  ? validate_xmit_skb_list+0x4d/0x80
  sch_direct_xmit+0x116/0x3a0
  __dev_xmit_skb+0x1fd/0x580
  __dev_queue_xmit+0x284/0x6b0
  ? _raw_spin_unlock_irq+0xe/0x50
  ? __flush_work.isra.0+0x20d/0x370
  ? push_pseudo_header+0x17/0x40 [ib_ipoib]
  neigh_connected_output+0xcd/0x110
  ip_finish_output2+0x179/0x480
  ? __smp_call_single_queue+0x61/0xa0
  __ip_finish_output+0xc3/0x190
  ip_finish_output+0x2e/0xf0
  ip_output+0x78/0x110
  ? __pfx_ip_finish_output+0x10/0x10
  ip_local_out+0x64/0x70
  __ip_queue_xmit+0x18a/0x460
  ip_queue_xmit+0x15/0x30
  __tcp_transmit_skb+0x914/0x9c0
  tcp_write_xmit+0x334/0x8d0
  tcp_push_one+0x3c/0x60
  tcp_sendmsg_locked+0x2e1/0xac0
  tcp_sendmsg+0x2d/0x50
  inet_sendmsg+0x43/0x90
  sock_sendmsg+0x68/0x80
  sock_write_iter+0x93/0x100
  vfs_write+0x326/0x3c0
  ksys_write+0xbd/0xf0
  ? do_syscall_64+0x69/0x90
  __x64_sys_write+0x19/0x30
  do_syscall_64+0x59/0x90
  ? do_user_addr_fault+0x1d0/0x640
  ? exit_to_user_mode_prepare+0x3b/0xd0
  ? irqentry_exit_to_user_mode+0x9/0x20
  ? irqentry_exit+0x43/0x50
  ? exc_page_fault+0x92/0x1b0
  entry_SYSCALL_64_after_hwframe+0x72/0xdc
 RIP: 0033:0x7fc03ad14a37
 Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
 RSP: 002b:00007ffdf8697fe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
 RAX: ffffffffffffffda RBX: 0000000000008024 RCX: 00007fc03ad14a37
 RDX: 0000000000008024 RSI: 0000556f46bd8270 RDI: 0000000000000003
 RBP: 0000556f46bb1800 R08: 0000000000007fe3 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002
 R13: 0000556f46bc66b0 R14: 000000000000000a R15: 0000556f46bb2f50
  </TASK>
 ---[ end trace 0000000000000000 ]---

Link: https://lore.kernel.org/r/8228ad34bd1a25047586270f7b1fb4ddcd046282.1706433934.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx5/wr.c | 2 +-
 include/linux/mlx5/qp.h         | 5 ++++-
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/hw/mlx5/wr.c b/drivers/infiniband/hw/mlx5/wr.c
index d6038fb6c50c6..19fd440a6ce38 100644
--- a/drivers/infiniband/hw/mlx5/wr.c
+++ b/drivers/infiniband/hw/mlx5/wr.c
@@ -128,7 +128,7 @@ static void set_eth_seg(const struct ib_send_wr *wr, struct mlx5_ib_qp *qp,
 		 */
 		copysz = min_t(u64, *cur_edge - (void *)eseg->inline_hdr.start,
 			       left);
-		memcpy(eseg->inline_hdr.start, pdata, copysz);
+		memcpy(eseg->inline_hdr.data, pdata, copysz);
 		stride = ALIGN(sizeof(struct mlx5_wqe_eth_seg) -
 			       sizeof(eseg->inline_hdr.start) + copysz, 16);
 		*size += stride / 16;
diff --git a/include/linux/mlx5/qp.h b/include/linux/mlx5/qp.h
index d75ef8aa8fac0..28d44061d6700 100644
--- a/include/linux/mlx5/qp.h
+++ b/include/linux/mlx5/qp.h
@@ -261,7 +261,10 @@ struct mlx5_wqe_eth_seg {
 	union {
 		struct {
 			__be16 sz;
-			u8     start[2];
+			union {
+				u8     start[2];
+				DECLARE_FLEX_ARRAY(u8, data);
+			};
 		} inline_hdr;
 		struct {
 			__be16 type;
-- 
2.43.0

[PATCH 5.10 013/238] RDMA/mlx5: Relax DEVX access upon modify commands

[Sasha Levin]

From: Yishai Hadas <yishaih@nvidia.com>

[ Upstream commit be551ee1574280ef8afbf7c271212ac3e38933ef ]

Relax DEVX access upon modify commands to be UVERBS_ACCESS_READ.

The kernel doesn't need to protect what firmware protects, or what
causes no damage to anyone but the user.

As firmware needs to protect itself from parallel access to the same
object, don't block parallel modify/query commands on the same object in
the kernel side.

This change will allow user space application to run parallel updates to
different entries in the same bulk object.

Tested-by: Tamar Mashiah <tmashiah@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/7407d5ed35dc427c1097699e12b49c01e1073406.1706433934.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx5/devx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/mlx5/devx.c b/drivers/infiniband/hw/mlx5/devx.c
index a56ebdc15723c..f67ebd9f3cdd1 100644
--- a/drivers/infiniband/hw/mlx5/devx.c
+++ b/drivers/infiniband/hw/mlx5/devx.c
@@ -2780,7 +2780,7 @@ DECLARE_UVERBS_NAMED_METHOD(
 	MLX5_IB_METHOD_DEVX_OBJ_MODIFY,
 	UVERBS_ATTR_IDR(MLX5_IB_ATTR_DEVX_OBJ_MODIFY_HANDLE,
 			UVERBS_IDR_ANY_OBJECT,
-			UVERBS_ACCESS_WRITE,
+			UVERBS_ACCESS_READ,
 			UA_MANDATORY),
 	UVERBS_ATTR_PTR_IN(
 		MLX5_IB_ATTR_DEVX_OBJ_MODIFY_CMD_IN,
-- 
2.43.0

[PATCH 5.10 014/238] x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h

[Sasha Levin]

From: Hou Tao <houtao1@huawei.com>

[ Upstream commit ee0e39a63b78849f8abbef268b13e4838569f646 ]

Move is_vsyscall_vaddr() into asm/vsyscall.h to make it available for
copy_from_kernel_nofault_allowed() in arch/x86/mm/maccess.c.

Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20240202103935.3154011-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/vsyscall.h | 10 ++++++++++
 arch/x86/mm/fault.c             |  9 ---------
 2 files changed, 10 insertions(+), 9 deletions(-)

diff --git a/arch/x86/include/asm/vsyscall.h b/arch/x86/include/asm/vsyscall.h
index ab60a71a8dcb9..472f0263dbc61 100644
--- a/arch/x86/include/asm/vsyscall.h
+++ b/arch/x86/include/asm/vsyscall.h
@@ -4,6 +4,7 @@
 
 #include <linux/seqlock.h>
 #include <uapi/asm/vsyscall.h>
+#include <asm/page_types.h>
 
 #ifdef CONFIG_X86_VSYSCALL_EMULATION
 extern void map_vsyscall(void);
@@ -24,4 +25,13 @@ static inline bool emulate_vsyscall(unsigned long error_code,
 }
 #endif
 
+/*
+ * The (legacy) vsyscall page is the long page in the kernel portion
+ * of the address space that has user-accessible permissions.
+ */
+static inline bool is_vsyscall_vaddr(unsigned long vaddr)
+{
+	return unlikely((vaddr & PAGE_MASK) == VSYSCALL_ADDR);
+}
+
 #endif /* _ASM_X86_VSYSCALL_H */
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 9c1545c376e9b..cdb337cf92bae 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -781,15 +781,6 @@ show_signal_msg(struct pt_regs *regs, unsigned long error_code,
 	show_opcodes(regs, loglvl);
 }
 
-/*
- * The (legacy) vsyscall page is the long page in the kernel portion
- * of the address space that has user-accessible permissions.
- */
-static bool is_vsyscall_vaddr(unsigned long vaddr)
-{
-	return unlikely((vaddr & PAGE_MASK) == VSYSCALL_ADDR);
-}
-
 static void
 __bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
 		       unsigned long address, u32 pkey, int si_code)
-- 
2.43.0

[PATCH 5.10 015/238] x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()

[Sasha Levin]

From: Hou Tao <houtao1@huawei.com>

[ Upstream commit 32019c659ecfe1d92e3bf9fcdfbb11a7c70acd58 ]

When trying to use copy_from_kernel_nofault() to read vsyscall page
through a bpf program, the following oops was reported:

  BUG: unable to handle page fault for address: ffffffffff600000
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 3231067 P4D 3231067 PUD 3233067 PMD 3235067 PTE 0
  Oops: 0000 [#1] PREEMPT SMP PTI
  CPU: 1 PID: 20390 Comm: test_progs ...... 6.7.0+ #58
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ......
  RIP: 0010:copy_from_kernel_nofault+0x6f/0x110
  ......
  Call Trace:
   <TASK>
   ? copy_from_kernel_nofault+0x6f/0x110
   bpf_probe_read_kernel+0x1d/0x50
   bpf_prog_2061065e56845f08_do_probe_read+0x51/0x8d
   trace_call_bpf+0xc5/0x1c0
   perf_call_bpf_enter.isra.0+0x69/0xb0
   perf_syscall_enter+0x13e/0x200
   syscall_trace_enter+0x188/0x1c0
   do_syscall_64+0xb5/0xe0
   entry_SYSCALL_64_after_hwframe+0x6e/0x76
   </TASK>
  ......
  ---[ end trace 0000000000000000 ]---

The oops is triggered when:

1) A bpf program uses bpf_probe_read_kernel() to read from the vsyscall
page and invokes copy_from_kernel_nofault() which in turn calls
__get_user_asm().

2) Because the vsyscall page address is not readable from kernel space,
a page fault exception is triggered accordingly.

3) handle_page_fault() considers the vsyscall page address as a user
space address instead of a kernel space address. This results in the
fix-up setup by bpf not being applied and a page_fault_oops() is invoked
due to SMAP.

Considering handle_page_fault() has already considered the vsyscall page
address as a userspace address, fix the problem by disallowing vsyscall
page read for copy_from_kernel_nofault().

Originally-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: syzbot+72aa0161922eba61b50e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/CAG48ez06TZft=ATH1qh2c5mpS5BT8UakwNkzi6nvK5_djC-4Nw@mail.gmail.com
Reported-by: xingwei lee <xrivendell7@gmail.com>
Closes: https://lore.kernel.org/bpf/CABOYnLynjBoFZOf3Z4BhaZkc5hx_kHfsjiW+UWLoB=w33LvScw@mail.gmail.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240202103935.3154011-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/mm/maccess.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/x86/mm/maccess.c b/arch/x86/mm/maccess.c
index 6993f026adec9..42115ac079cfe 100644
--- a/arch/x86/mm/maccess.c
+++ b/arch/x86/mm/maccess.c
@@ -3,6 +3,8 @@
 #include <linux/uaccess.h>
 #include <linux/kernel.h>
 
+#include <asm/vsyscall.h>
+
 #ifdef CONFIG_X86_64
 bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size)
 {
@@ -15,6 +17,14 @@ bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size)
 	if (vaddr < TASK_SIZE_MAX + PAGE_SIZE)
 		return false;
 
+	/*
+	 * Reading from the vsyscall page may cause an unhandled fault in
+	 * certain cases.  Though it is at an address above TASK_SIZE_MAX, it is
+	 * usually considered as a user space address.
+	 */
+	if (is_vsyscall_vaddr(vaddr))
+		return false;
+
 	/*
 	 * Allow everything during early boot before 'x86_virt_bits'
 	 * is initialized.  Needed for instruction decoding in early
-- 
2.43.0

[PATCH 5.10 016/238] net/iucv: fix the allocation size of iucv_path_table array

[Sasha Levin]

From: Alexander Gordeev <agordeev@linux.ibm.com>

[ Upstream commit b4ea9b6a18ebf7f9f3a7a60f82e925186978cfcf ]

iucv_path_table is a dynamically allocated array of pointers to
struct iucv_path items. Yet, its size is calculated as if it was
an array of struct iucv_path items.

Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/iucv/iucv.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/iucv/iucv.c b/net/iucv/iucv.c
index 6f84978a77265..ed0dbdbba4d94 100644
--- a/net/iucv/iucv.c
+++ b/net/iucv/iucv.c
@@ -156,7 +156,7 @@ static char iucv_error_pathid[16] = "INVALID PATHID";
 static LIST_HEAD(iucv_handler_list);
 
 /*
- * iucv_path_table: an array of iucv_path structures.
+ * iucv_path_table: array of pointers to iucv_path structures.
  */
 static struct iucv_path **iucv_path_table;
 static unsigned long iucv_max_pathid;
@@ -542,7 +542,7 @@ static int iucv_enable(void)
 
 	get_online_cpus();
 	rc = -ENOMEM;
-	alloc_size = iucv_max_pathid * sizeof(struct iucv_path);
+	alloc_size = iucv_max_pathid * sizeof(*iucv_path_table);
 	iucv_path_table = kzalloc(alloc_size, GFP_KERNEL);
 	if (!iucv_path_table)
 		goto out;
-- 
2.43.0

[PATCH 5.10 017/238] parisc/ftrace: add missing CONFIG_DYNAMIC_FTRACE check

[Sasha Levin]

From: Max Kellermann <max.kellermann@ionos.com>

[ Upstream commit 250f5402e636a5cec9e0e95df252c3d54307210f ]

Fixes a bug revealed by -Wmissing-prototypes when
CONFIG_FUNCTION_GRAPH_TRACER is enabled but not CONFIG_DYNAMIC_FTRACE:

 arch/parisc/kernel/ftrace.c:82:5: error: no previous prototype for 'ftrace_enable_ftrace_graph_caller' [-Werror=missing-prototypes]
    82 | int ftrace_enable_ftrace_graph_caller(void)
       |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 arch/parisc/kernel/ftrace.c:88:5: error: no previous prototype for 'ftrace_disable_ftrace_graph_caller' [-Werror=missing-prototypes]
    88 | int ftrace_disable_ftrace_graph_caller(void)
       |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/kernel/ftrace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/parisc/kernel/ftrace.c b/arch/parisc/kernel/ftrace.c
index 63e3ecb9da812..8538425cc43e0 100644
--- a/arch/parisc/kernel/ftrace.c
+++ b/arch/parisc/kernel/ftrace.c
@@ -81,7 +81,7 @@ void notrace __hot ftrace_function_trampoline(unsigned long parent,
 #endif
 }
 
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#if defined(CONFIG_DYNAMIC_FTRACE) && defined(CONFIG_FUNCTION_GRAPH_TRACER)
 int ftrace_enable_ftrace_graph_caller(void)
 {
 	return 0;
-- 
2.43.0

[PATCH 5.10 018/238] block: sed-opal: handle empty atoms when parsing response

[Sasha Levin]

From: Greg Joyce <gjoyce@linux.ibm.com>

[ Upstream commit 5429c8de56f6b2bd8f537df3a1e04e67b9c04282 ]

The SED Opal response parsing function response_parse() does not
handle the case of an empty atom in the response. This causes
the entry count to be too high and the response fails to be
parsed. Recognizing, but ignoring, empty atoms allows response
handling to succeed.

Signed-off-by: Greg Joyce <gjoyce@linux.ibm.com>
Link: https://lore.kernel.org/r/20240216210417.3526064-2-gjoyce@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/opal_proto.h | 1 +
 block/sed-opal.c   | 6 +++++-
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/block/opal_proto.h b/block/opal_proto.h
index b486b3ec7dc41..a50191bddbc26 100644
--- a/block/opal_proto.h
+++ b/block/opal_proto.h
@@ -66,6 +66,7 @@ enum opal_response_token {
 #define SHORT_ATOM_BYTE  0xBF
 #define MEDIUM_ATOM_BYTE 0xDF
 #define LONG_ATOM_BYTE   0xE3
+#define EMPTY_ATOM_BYTE  0xFF
 
 #define OPAL_INVAL_PARAM 12
 #define OPAL_MANUFACTURED_INACTIVE 0x08
diff --git a/block/sed-opal.c b/block/sed-opal.c
index 0ac5a4f3f2261..00e4d23ac49e7 100644
--- a/block/sed-opal.c
+++ b/block/sed-opal.c
@@ -895,16 +895,20 @@ static int response_parse(const u8 *buf, size_t length,
 			token_length = response_parse_medium(iter, pos);
 		else if (pos[0] <= LONG_ATOM_BYTE) /* long atom */
 			token_length = response_parse_long(iter, pos);
+		else if (pos[0] == EMPTY_ATOM_BYTE) /* empty atom */
+			token_length = 1;
 		else /* TOKEN */
 			token_length = response_parse_token(iter, pos);
 
 		if (token_length < 0)
 			return token_length;
 
+		if (pos[0] != EMPTY_ATOM_BYTE)
+			num_entries++;
+
 		pos += token_length;
 		total -= token_length;
 		iter++;
-		num_entries++;
 	}
 
 	resp->num = num_entries;
-- 
2.43.0

[PATCH 5.10 019/238] dm-verity, dm-crypt: align "struct bvec_iter" correctly

[Sasha Levin]

From: Mikulas Patocka <mpatocka@redhat.com>

[ Upstream commit 787f1b2800464aa277236a66eb3c279535edd460 ]

"struct bvec_iter" is defined with the __packed attribute, so it is
aligned on a single byte. On X86 (and on other architectures that support
unaligned addresses in hardware), "struct bvec_iter" is accessed using the
8-byte and 4-byte memory instructions, however these instructions are less
efficient if they operate on unaligned addresses.

(on RISC machines that don't have unaligned access in hardware, GCC
generates byte-by-byte accesses that are very inefficient - see [1])

This commit reorders the entries in "struct dm_verity_io" and "struct
convert_context", so that "struct bvec_iter" is aligned on 8 bytes.

[1] https://lore.kernel.org/all/ZcLuWUNRZadJr0tQ@fedora/T/

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-crypt.c  | 4 ++--
 drivers/md/dm-verity.h | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 5edcdcee91c23..5deda6c6fa2e7 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -48,11 +48,11 @@
 struct convert_context {
 	struct completion restart;
 	struct bio *bio_in;
-	struct bio *bio_out;
 	struct bvec_iter iter_in;
+	struct bio *bio_out;
 	struct bvec_iter iter_out;
-	u64 cc_sector;
 	atomic_t cc_pending;
+	u64 cc_sector;
 	union {
 		struct skcipher_request *req;
 		struct aead_request *req_aead;
diff --git a/drivers/md/dm-verity.h b/drivers/md/dm-verity.h
index 78d1e51195ada..f61c89c79cf5b 100644
--- a/drivers/md/dm-verity.h
+++ b/drivers/md/dm-verity.h
@@ -74,11 +74,11 @@ struct dm_verity_io {
 	/* original value of bio->bi_end_io */
 	bio_end_io_t *orig_bi_end_io;
 
+	struct bvec_iter iter;
+
 	sector_t block;
 	unsigned n_blocks;
 
-	struct bvec_iter iter;
-
 	struct work_struct work;
 
 	/*
-- 
2.43.0

[PATCH 5.10 020/238] scsi: mpt3sas: Prevent sending diag_reset when the controller is ready

[Sasha Levin]

From: Ranjan Kumar <ranjan.kumar@broadcom.com>

[ Upstream commit ee0017c3ed8a8abfa4d40e42f908fb38c31e7515 ]

If the driver detects that the controller is not ready before sending the
first IOC facts command, it will wait for a maximum of 10 seconds for it to
become ready. However, even if the controller becomes ready within 10
seconds, the driver will still issue a diagnostic reset.

Modify the driver to avoid sending a diag reset if the controller becomes
ready within the 10-second wait time.

Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20240221071724.14986-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mpt3sas/mpt3sas_base.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 814ac25238058..105d781d0cacf 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -6357,7 +6357,9 @@ _base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout)
 		return -EFAULT;
 	}
 
- issue_diag_reset:
+	return 0;
+
+issue_diag_reset:
 	rc = _base_diag_reset(ioc);
 	return rc;
 }
-- 
2.43.0

[PATCH 5.10 021/238] Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security

[Sasha Levin]

From: Yuxuan Hu <20373622@buaa.edu.cn>

[ Upstream commit 2535b848fa0f42ddff3e5255cf5e742c9b77bb26 ]

During our fuzz testing of the connection and disconnection process at the
RFCOMM layer, we discovered this bug. By comparing the packets from a
normal connection and disconnection process with the testcase that
triggered a KASAN report. We analyzed the cause of this bug as follows:

1. In the packets captured during a normal connection, the host sends a
`Read Encryption Key Size` type of `HCI_CMD` packet
(Command Opcode: 0x1408) to the controller to inquire the length of
encryption key.After receiving this packet, the controller immediately
replies with a Command Completepacket (Event Code: 0x0e) to return the
Encryption Key Size.

2. In our fuzz test case, the timing of the controller's response to this
packet was delayed to an unexpected point: after the RFCOMM and L2CAP
layers had disconnected but before the HCI layer had disconnected.

3. After receiving the Encryption Key Size Response at the time described
in point 2, the host still called the rfcomm_check_security function.
However, by this time `struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn;`
had already been released, and when the function executed
`return hci_conn_security(conn->hcon, d->sec_level, auth_type, d->out);`,
specifically when accessing `conn->hcon`, a null-ptr-deref error occurred.

To fix this bug, check if `sk->sk_state` is BT_CLOSED before calling
rfcomm_recv_frame in rfcomm_process_rx.

Signed-off-by: Yuxuan Hu <20373622@buaa.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/rfcomm/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 8d6fce9005bdd..4f54c7df3a94f 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -1937,7 +1937,7 @@ static struct rfcomm_session *rfcomm_process_rx(struct rfcomm_session *s)
 	/* Get data directly from socket receive queue without copying it. */
 	while ((skb = skb_dequeue(&sk->sk_receive_queue))) {
 		skb_orphan(skb);
-		if (!skb_linearize(skb)) {
+		if (!skb_linearize(skb) && sk->sk_state != BT_CLOSED) {
 			s = rfcomm_recv_frame(s, skb);
 			if (!s)
 				break;
-- 
2.43.0

[PATCH 5.10 022/238] firewire: core: use long bus reset on gap count error

[Sasha Levin]

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

[ Upstream commit d0b06dc48fb15902d7da09c5c0861e7f042a9381 ]

When resetting the bus after a gap count error, use a long rather than
short bus reset.

IEEE 1394-1995 uses only long bus resets. IEEE 1394a adds the option of
short bus resets. When video or audio transmission is in progress and a
device is hot-plugged elsewhere on the bus, the resulting bus reset can
cause video frame drops or audio dropouts. Short bus resets reduce or
eliminate this problem. Accordingly, short bus resets are almost always
preferred.

However, on a mixed 1394/1394a bus, a short bus reset can trigger an
immediate additional bus reset. This double bus reset can be interpreted
differently by different nodes on the bus, resulting in an inconsistent gap
count after the bus reset. An inconsistent gap count will cause another bus
reset, leading to a neverending bus reset loop. This only happens for some
bus topologies, not for all mixed 1394/1394a buses.

By instead sending a long bus reset after a gap count inconsistency, we
avoid the doubled bus reset, restoring the bus to normal operation.

Signed-off-by: Adam Goldman <adamg@pobox.com>
Link: https://sourceforge.net/p/linux1394/mailman/message/58741624/
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firewire/core-card.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c
index be195ba834632..d446a72629414 100644
--- a/drivers/firewire/core-card.c
+++ b/drivers/firewire/core-card.c
@@ -500,7 +500,19 @@ static void bm_work(struct work_struct *work)
 		fw_notice(card, "phy config: new root=%x, gap_count=%d\n",
 			  new_root_id, gap_count);
 		fw_send_phy_config(card, new_root_id, generation, gap_count);
-		reset_bus(card, true);
+		/*
+		 * Where possible, use a short bus reset to minimize
+		 * disruption to isochronous transfers. But in the event
+		 * of a gap count inconsistency, use a long bus reset.
+		 *
+		 * As noted in 1394a 8.4.6.2, nodes on a mixed 1394/1394a bus
+		 * may set different gap counts after a bus reset. On a mixed
+		 * 1394/1394a bus, a short bus reset can get doubled. Some
+		 * nodes may treat the double reset as one bus reset and others
+		 * may treat it as two, causing a gap count inconsistency
+		 * again. Using a long bus reset prevents this.
+		 */
+		reset_bus(card, card->gap_count != 0);
 		/* Will allocate broadcast channel after the reset. */
 		goto out;
 	}
-- 
2.43.0

[PATCH 5.10 023/238] ASoC: Intel: bytcr_rt5640: Add an extra entry for the Chuwi Vi8 tablet

[Sasha Levin]

From: Alban Boyé <alban.boye@protonmail.com>

[ Upstream commit f8b0127aca8c60826e7354e504a12d4a46b1c3bb ]

The bios version can differ depending if it is a dual-boot variant of the tablet.
Therefore another DMI match is required.

Signed-off-by: Alban Boyé <alban.boye@protonmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240228192807.15130-1-alban.boye@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index f5b1b3b876980..1d049685e7075 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -529,6 +529,18 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF1 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Chuwi Vi8 dual-boot (CWI506) */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Insyde"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "i86"),
+			/* The above are too generic, also match BIOS info */
+			DMI_MATCH(DMI_BIOS_VERSION, "CHUWI2.D86JHBNR02"),
+		},
+		.driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+					BYT_RT5640_MONO_SPEAKER |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{
 		/* Chuwi Vi10 (CWI505) */
 		.matches = {
-- 
2.43.0

[PATCH 5.10 024/238] Input: gpio_keys_polled - suppress deferred probe error for gpio

[Sasha Levin]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit 963465a33141d0d52338e77f80fe543d2c9dc053 ]

On a PC Engines APU our admins are faced with:

	$ dmesg | grep -c "gpio-keys-polled gpio-keys-polled: unable to claim gpio 0, err=-517"
	261

Such a message always appears when e.g. a new USB device is plugged in.

Suppress this message which considerably clutters the kernel log for
EPROBE_DEFER (i.e. -517).

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240305101042.10953-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/keyboard/gpio_keys_polled.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
index c3937d2fc7446..a0f9978c68f55 100644
--- a/drivers/input/keyboard/gpio_keys_polled.c
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -319,12 +319,10 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
 
 			error = devm_gpio_request_one(dev, button->gpio,
 					flags, button->desc ? : DRV_NAME);
-			if (error) {
-				dev_err(dev,
-					"unable to claim gpio %u, err=%d\n",
-					button->gpio, error);
-				return error;
-			}
+			if (error)
+				return dev_err_probe(dev, error,
+						     "unable to claim gpio %u\n",
+						     button->gpio);
 
 			bdata->gpiod = gpio_to_desc(button->gpio);
 			if (!bdata->gpiod) {
-- 
2.43.0

[PATCH 5.10 025/238] ASoC: wm8962: Enable oscillator if selecting WM8962_FLL_OSC

[Sasha Levin]

From: Stuart Henderson <stuarth@opensource.cirrus.com>

[ Upstream commit 03c7874106ca5032a312626b927b1c35f07b1f35 ]

Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Link: https://msgid.link/r/20240306161439.1385643-1-stuarth@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8962.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 57aeded978c28..d6efc85f966b0 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2898,8 +2898,12 @@ static int wm8962_set_fll(struct snd_soc_component *component, int fll_id, int s
 	switch (fll_id) {
 	case WM8962_FLL_MCLK:
 	case WM8962_FLL_BCLK:
+		fll1 |= (fll_id - 1) << WM8962_FLL_REFCLK_SRC_SHIFT;
+		break;
 	case WM8962_FLL_OSC:
 		fll1 |= (fll_id - 1) << WM8962_FLL_REFCLK_SRC_SHIFT;
+		snd_soc_component_update_bits(component, WM8962_PLL2,
+					      WM8962_OSC_ENA, WM8962_OSC_ENA);
 		break;
 	case WM8962_FLL_INT:
 		snd_soc_component_update_bits(component, WM8962_FLL_CONTROL_1,
-- 
2.43.0

[PATCH 5.10 026/238] ASoC: wm8962: Enable both SPKOUTR_ENA and SPKOUTL_ENA in mono mode

[Sasha Levin]

From: Stuart Henderson <stuarth@opensource.cirrus.com>

[ Upstream commit 6fa849e4d78b880e878138bf238e4fd2bac3c4fa ]

Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Link: https://msgid.link/r/20240306161439.1385643-2-stuarth@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8962.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index d6efc85f966b0..030471248e0e4 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2219,6 +2219,9 @@ SND_SOC_DAPM_PGA_E("HPOUT", SND_SOC_NOPM, 0, 0, NULL, 0, hp_event,
 
 SND_SOC_DAPM_OUTPUT("HPOUTL"),
 SND_SOC_DAPM_OUTPUT("HPOUTR"),
+
+SND_SOC_DAPM_PGA("SPKOUTL Output", WM8962_CLASS_D_CONTROL_1, 6, 0, NULL, 0),
+SND_SOC_DAPM_PGA("SPKOUTR Output", WM8962_CLASS_D_CONTROL_1, 7, 0, NULL, 0),
 };
 
 static const struct snd_soc_dapm_widget wm8962_dapm_spk_mono_widgets[] = {
@@ -2226,7 +2229,6 @@ SND_SOC_DAPM_MIXER("Speaker Mixer", WM8962_MIXER_ENABLES, 1, 0,
 		   spkmixl, ARRAY_SIZE(spkmixl)),
 SND_SOC_DAPM_MUX_E("Speaker PGA", WM8962_PWR_MGMT_2, 4, 0, &spkoutl_mux,
 		   out_pga_event, SND_SOC_DAPM_POST_PMU),
-SND_SOC_DAPM_PGA("Speaker Output", WM8962_CLASS_D_CONTROL_1, 7, 0, NULL, 0),
 SND_SOC_DAPM_OUTPUT("SPKOUT"),
 };
 
@@ -2241,9 +2243,6 @@ SND_SOC_DAPM_MUX_E("SPKOUTL PGA", WM8962_PWR_MGMT_2, 4, 0, &spkoutl_mux,
 SND_SOC_DAPM_MUX_E("SPKOUTR PGA", WM8962_PWR_MGMT_2, 3, 0, &spkoutr_mux,
 		   out_pga_event, SND_SOC_DAPM_POST_PMU),
 
-SND_SOC_DAPM_PGA("SPKOUTR Output", WM8962_CLASS_D_CONTROL_1, 7, 0, NULL, 0),
-SND_SOC_DAPM_PGA("SPKOUTL Output", WM8962_CLASS_D_CONTROL_1, 6, 0, NULL, 0),
-
 SND_SOC_DAPM_OUTPUT("SPKOUTL"),
 SND_SOC_DAPM_OUTPUT("SPKOUTR"),
 };
@@ -2353,12 +2352,18 @@ static const struct snd_soc_dapm_route wm8962_spk_mono_intercon[] = {
 	{ "Speaker PGA", "Mixer", "Speaker Mixer" },
 	{ "Speaker PGA", "DAC", "DACL" },
 
-	{ "Speaker Output", NULL, "Speaker PGA" },
-	{ "Speaker Output", NULL, "SYSCLK" },
-	{ "Speaker Output", NULL, "TOCLK" },
-	{ "Speaker Output", NULL, "TEMP_SPK" },
+	{ "SPKOUTL Output", NULL, "Speaker PGA" },
+	{ "SPKOUTL Output", NULL, "SYSCLK" },
+	{ "SPKOUTL Output", NULL, "TOCLK" },
+	{ "SPKOUTL Output", NULL, "TEMP_SPK" },
+
+	{ "SPKOUTR Output", NULL, "Speaker PGA" },
+	{ "SPKOUTR Output", NULL, "SYSCLK" },
+	{ "SPKOUTR Output", NULL, "TOCLK" },
+	{ "SPKOUTR Output", NULL, "TEMP_SPK" },
 
-	{ "SPKOUT", NULL, "Speaker Output" },
+	{ "SPKOUT", NULL, "SPKOUTL Output" },
+	{ "SPKOUT", NULL, "SPKOUTR Output" },
 };
 
 static const struct snd_soc_dapm_route wm8962_spk_stereo_intercon[] = {
-- 
2.43.0

[PATCH 5.10 027/238] ASoC: wm8962: Fix up incorrect error message in wm8962_set_fll

[Sasha Levin]

From: Stuart Henderson <stuarth@opensource.cirrus.com>

[ Upstream commit 96e202f8c52ac49452f83317cf3b34cd1ad81e18 ]

Use source instead of ret, which seems to be unrelated and will always
be zero.

Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Link: https://msgid.link/r/20240306161439.1385643-5-stuarth@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8962.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 030471248e0e4..272932e200d87 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2917,7 +2917,7 @@ static int wm8962_set_fll(struct snd_soc_component *component, int fll_id, int s
 				    WM8962_FLL_FRC_NCO, WM8962_FLL_FRC_NCO);
 		break;
 	default:
-		dev_err(component->dev, "Unknown FLL source %d\n", ret);
+		dev_err(component->dev, "Unknown FLL source %d\n", source);
 		return -EINVAL;
 	}
 
-- 
2.43.0

[PATCH 5.10 028/238] x86/paravirt: Fix build due to __text_gen_insn() backport

[Sasha Levin]

From: "Borislav Petkov (AMD)" <bp@alien8.de>

The Link tag has all the details but basically due to missing upstream
commits, the header which contains __text_gen_insn() is not in the
includes in paravirt.c, leading to:

  arch/x86/kernel/paravirt.c: In function 'paravirt_patch_call':
  arch/x86/kernel/paravirt.c:65:9: error: implicit declaration of function '__text_gen_insn' \
  [-Werror=implicit-function-declaration]
   65 |         __text_gen_insn(insn_buff, CALL_INSN_OPCODE,
      |         ^~~~~~~~~~~~~~~

Add the missing include.

Reported-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/ZeYXvd1-rVkPGvvW@telecaster
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/paravirt.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 5bea8d93883a2..f0e4ad8595ca7 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -31,6 +31,7 @@
 #include <asm/special_insns.h>
 #include <asm/tlb.h>
 #include <asm/io_bitmap.h>
+#include <asm/text-patching.h>
 
 /*
  * nop stub, which must not clobber anything *including the stack* to
-- 
2.43.0

[PATCH 5.10 029/238] do_sys_name_to_handle(): use kzalloc() to fix kernel-infoleak

[Sasha Levin]

From: Nikita Zhandarovich <n.zhandarovich@fintech.ru>

[ Upstream commit 3948abaa4e2be938ccdfc289385a27342fb13d43 ]

syzbot identified a kernel information leak vulnerability in
do_sys_name_to_handle() and issued the following report [1].

[1]
"BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_user+0xbc/0x100 lib/usercopy.c:40
 instrument_copy_to_user include/linux/instrumented.h:114 [inline]
 _copy_to_user+0xbc/0x100 lib/usercopy.c:40
 copy_to_user include/linux/uaccess.h:191 [inline]
 do_sys_name_to_handle fs/fhandle.c:73 [inline]
 __do_sys_name_to_handle_at fs/fhandle.c:112 [inline]
 __se_sys_name_to_handle_at+0x949/0xb10 fs/fhandle.c:94
 __x64_sys_name_to_handle_at+0xe4/0x140 fs/fhandle.c:94
 ...

Uninit was created at:
 slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
 slab_alloc_node mm/slub.c:3478 [inline]
 __kmem_cache_alloc_node+0x5c9/0x970 mm/slub.c:3517
 __do_kmalloc_node mm/slab_common.c:1006 [inline]
 __kmalloc+0x121/0x3c0 mm/slab_common.c:1020
 kmalloc include/linux/slab.h:604 [inline]
 do_sys_name_to_handle fs/fhandle.c:39 [inline]
 __do_sys_name_to_handle_at fs/fhandle.c:112 [inline]
 __se_sys_name_to_handle_at+0x441/0xb10 fs/fhandle.c:94
 __x64_sys_name_to_handle_at+0xe4/0x140 fs/fhandle.c:94
 ...

Bytes 18-19 of 20 are uninitialized
Memory access of size 20 starts at ffff888128a46380
Data copied to user address 0000000020000240"

Per Chuck Lever's suggestion, use kzalloc() instead of kmalloc() to
solve the problem.

Fixes: 990d6c2d7aee ("vfs: Add name to file handle conversion support")
Suggested-by: Chuck Lever III <chuck.lever@oracle.com>
Reported-and-tested-by: <syzbot+09b349b3066c2e0b1e96@syzkaller.appspotmail.com>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20240119153906.4367-1-n.zhandarovich@fintech.ru
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/fhandle.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/fhandle.c b/fs/fhandle.c
index 01263ffbc4c08..9a5f153c8919e 100644
--- a/fs/fhandle.c
+++ b/fs/fhandle.c
@@ -37,7 +37,7 @@ static long do_sys_name_to_handle(struct path *path,
 	if (f_handle.handle_bytes > MAX_HANDLE_SZ)
 		return -EINVAL;
 
-	handle = kmalloc(sizeof(struct file_handle) + f_handle.handle_bytes,
+	handle = kzalloc(sizeof(struct file_handle) + f_handle.handle_bytes,
 			 GFP_KERNEL);
 	if (!handle)
 		return -ENOMEM;
-- 
2.43.0

[PATCH 5.10 030/238] nbd: null check for nla_nest_start

[Sasha Levin]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit 31edf4bbe0ba27fd03ac7d87eb2ee3d2a231af6d ]

nla_nest_start() may fail and return NULL. Insert a check and set errno
based on other call sites within the same source code.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Fixes: 47d902b90a32 ("nbd: add a status netlink command")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240218042534.it.206-kees@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/nbd.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index e0f805ca0e727..d6e3edb404748 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -2339,6 +2339,12 @@ static int nbd_genl_status(struct sk_buff *skb, struct genl_info *info)
 	}
 
 	dev_list = nla_nest_start_noflag(reply, NBD_ATTR_DEVICE_LIST);
+	if (!dev_list) {
+		nlmsg_free(reply);
+		ret = -EMSGSIZE;
+		goto out;
+	}
+
 	if (index == -1) {
 		ret = idr_for_each(&nbd_index_idr, &status_cb, reply);
 		if (ret) {
-- 
2.43.0

[PATCH 5.10 031/238] fs/select: rework stack allocation hack for clang

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit ddb9fd7a544088ed70eccbb9f85e9cc9952131c1 ]

A while ago, we changed the way that select() and poll() preallocate
a temporary buffer just under the size of the static warning limit of
1024 bytes, as clang was frequently going slightly above that limit.

The warnings have recently returned and I took another look. As it turns
out, clang is not actually inherently worse at reserving stack space,
it just happens to inline do_select() into core_sys_select(), while gcc
never inlines it.

Annotate do_select() to never be inlined and in turn remove the special
case for the allocation size. This should give the same behavior for
both clang and gcc all the time and once more avoids those warnings.

Fixes: ad312f95d41c ("fs/select: avoid clang stack usage warning")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240216202352.2492798-1-arnd@kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/select.c          | 2 +-
 include/linux/poll.h | 4 ----
 2 files changed, 1 insertion(+), 5 deletions(-)

diff --git a/fs/select.c b/fs/select.c
index 5edffee1162c2..668a5200503ae 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -475,7 +475,7 @@ static inline void wait_key_set(poll_table *wait, unsigned long in,
 		wait->_key |= POLLOUT_SET;
 }
 
-static int do_select(int n, fd_set_bits *fds, struct timespec64 *end_time)
+static noinline_for_stack int do_select(int n, fd_set_bits *fds, struct timespec64 *end_time)
 {
 	ktime_t expire, *to = NULL;
 	struct poll_wqueues table;
diff --git a/include/linux/poll.h b/include/linux/poll.h
index 1cdc32b1f1b08..7e0fdcf905d2e 100644
--- a/include/linux/poll.h
+++ b/include/linux/poll.h
@@ -16,11 +16,7 @@
 extern struct ctl_table epoll_table[]; /* for sysctl */
 /* ~832 bytes of stack space used max in sys_select/sys_poll before allocating
    additional memory. */
-#ifdef __clang__
-#define MAX_STACK_ALLOC 768
-#else
 #define MAX_STACK_ALLOC 832
-#endif
 #define FRONTEND_STACK_ALLOC	256
 #define SELECT_STACK_ALLOC	FRONTEND_STACK_ALLOC
 #define POLL_STACK_ALLOC	FRONTEND_STACK_ALLOC
-- 
2.43.0

[PATCH 5.10 032/238] block: add a new set_read_only method

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit e00adcadf3af7a8335026d71ab9f0e0a922191ac ]

Add a new method to allow for driver-specific processing when setting or
clearing the block device read-only state.  This allows to replace the
cumbersome and error-prone override of the whole ioctl implementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 9674f54e41ff ("md: Don't clear MD_CLOSING when the raid is about to stop")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/ioctl.c          | 5 +++++
 include/linux/blkdev.h | 1 +
 2 files changed, 6 insertions(+)

diff --git a/block/ioctl.c b/block/ioctl.c
index e7eed7dadb5cf..24f8042f12b60 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -405,6 +405,11 @@ static int blkdev_roset(struct block_device *bdev, fmode_t mode,
 		return ret;
 	if (get_user(n, (int __user *)arg))
 		return -EFAULT;
+	if (bdev->bd_disk->fops->set_read_only) {
+		ret = bdev->bd_disk->fops->set_read_only(bdev, n);
+		if (ret)
+			return ret;
+	}
 	set_device_ro(bdev, n);
 	return 0;
 }
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 98fdf5a31fd66..583824f111079 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1883,6 +1883,7 @@ struct block_device_operations {
 	void (*unlock_native_capacity) (struct gendisk *);
 	int (*revalidate_disk) (struct gendisk *);
 	int (*getgeo)(struct block_device *, struct hd_geometry *);
+	int (*set_read_only)(struct block_device *bdev, bool ro);
 	/* this callback is with swap_lock and sometimes page table lock held */
 	void (*swap_slot_free_notify) (struct block_device *, unsigned long);
 	int (*report_zones)(struct gendisk *, sector_t sector,
-- 
2.43.0

[PATCH 5.10 033/238] md: implement ->set_read_only to hook into BLKROSET processing

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 118cf084adb3964d06e1667cf7d702e56e5cd2c5 ]

Implement the ->set_read_only method instead of parsing the actual
ioctl command.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 9674f54e41ff ("md: Don't clear MD_CLOSING when the raid is about to stop")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md.c | 62 ++++++++++++++++++++++++-------------------------
 1 file changed, 31 insertions(+), 31 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 03d2e31dda2f6..d6f12338cb989 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7536,7 +7536,6 @@ static inline bool md_ioctl_valid(unsigned int cmd)
 {
 	switch (cmd) {
 	case ADD_NEW_DISK:
-	case BLKROSET:
 	case GET_ARRAY_INFO:
 	case GET_BITMAP_FILE:
 	case GET_DISK_INFO:
@@ -7563,7 +7562,6 @@ static int md_ioctl(struct block_device *bdev, fmode_t mode,
 	int err = 0;
 	void __user *argp = (void __user *)arg;
 	struct mddev *mddev = NULL;
-	int ro;
 	bool did_set_md_closing = false;
 
 	if (!md_ioctl_valid(cmd))
@@ -7746,35 +7744,6 @@ static int md_ioctl(struct block_device *bdev, fmode_t mode,
 			goto unlock;
 		}
 		break;
-
-	case BLKROSET:
-		if (get_user(ro, (int __user *)(arg))) {
-			err = -EFAULT;
-			goto unlock;
-		}
-		err = -EINVAL;
-
-		/* if the bdev is going readonly the value of mddev->ro
-		 * does not matter, no writes are coming
-		 */
-		if (ro)
-			goto unlock;
-
-		/* are we are already prepared for writes? */
-		if (mddev->ro != 1)
-			goto unlock;
-
-		/* transitioning to readauto need only happen for
-		 * arrays that call md_write_start
-		 */
-		if (mddev->pers) {
-			err = restart_array(mddev);
-			if (err == 0) {
-				mddev->ro = 2;
-				set_disk_ro(mddev->gendisk, 0);
-			}
-		}
-		goto unlock;
 	}
 
 	/*
@@ -7868,6 +7837,36 @@ static int md_compat_ioctl(struct block_device *bdev, fmode_t mode,
 }
 #endif /* CONFIG_COMPAT */
 
+static int md_set_read_only(struct block_device *bdev, bool ro)
+{
+	struct mddev *mddev = bdev->bd_disk->private_data;
+	int err;
+
+	err = mddev_lock(mddev);
+	if (err)
+		return err;
+
+	if (!mddev->raid_disks && !mddev->external) {
+		err = -ENODEV;
+		goto out_unlock;
+	}
+
+	/*
+	 * Transitioning to read-auto need only happen for arrays that call
+	 * md_write_start and which are not ready for writes yet.
+	 */
+	if (!ro && mddev->ro == 1 && mddev->pers) {
+		err = restart_array(mddev);
+		if (err)
+			goto out_unlock;
+		mddev->ro = 2;
+	}
+
+out_unlock:
+	mddev_unlock(mddev);
+	return err;
+}
+
 static int md_open(struct block_device *bdev, fmode_t mode)
 {
 	/*
@@ -7944,6 +7943,7 @@ const struct block_device_operations md_fops =
 #endif
 	.getgeo		= md_getgeo,
 	.check_events	= md_check_events,
+	.set_read_only	= md_set_read_only,
 };
 
 static int md_thread(void *arg)
-- 
2.43.0

[PATCH 5.10 034/238] md: Don't clear MD_CLOSING when the raid is about to stop

[Sasha Levin]

From: Li Nan <linan122@huawei.com>

[ Upstream commit 9674f54e41fffaf06f6a60202e1fa4cc13de3cf5 ]

The raid should not be opened anymore when it is about to be stopped.
However, other processes can open it again if the flag MD_CLOSING is
cleared before exiting. From now on, this flag will not be cleared when
the raid will be stopped.

Fixes: 065e519e71b2 ("md: MD_CLOSING needs to be cleared after called md_set_readonly or do_md_stop")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240226031444.3606764-6-linan666@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index d6f12338cb989..09c7f52156f3f 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -6243,7 +6243,15 @@ static void md_clean(struct mddev *mddev)
 	mddev->persistent = 0;
 	mddev->level = LEVEL_NONE;
 	mddev->clevel[0] = 0;
-	mddev->flags = 0;
+	/*
+	 * Don't clear MD_CLOSING, or mddev can be opened again.
+	 * 'hold_active != 0' means mddev is still in the creation
+	 * process and will be used later.
+	 */
+	if (mddev->hold_active)
+		mddev->flags = 0;
+	else
+		mddev->flags &= BIT_ULL_MASK(MD_CLOSING);
 	mddev->sb_flags = 0;
 	mddev->ro = 0;
 	mddev->metadata_type[0] = 0;
@@ -7562,7 +7570,6 @@ static int md_ioctl(struct block_device *bdev, fmode_t mode,
 	int err = 0;
 	void __user *argp = (void __user *)arg;
 	struct mddev *mddev = NULL;
-	bool did_set_md_closing = false;
 
 	if (!md_ioctl_valid(cmd))
 		return -ENOTTY;
@@ -7649,7 +7656,6 @@ static int md_ioctl(struct block_device *bdev, fmode_t mode,
 			err = -EBUSY;
 			goto out;
 		}
-		did_set_md_closing = true;
 		mutex_unlock(&mddev->open_mutex);
 		sync_blockdev(bdev);
 	}
@@ -7813,7 +7819,7 @@ static int md_ioctl(struct block_device *bdev, fmode_t mode,
 		mddev->hold_active = 0;
 	mddev_unlock(mddev);
 out:
-	if(did_set_md_closing)
+	if (cmd == STOP_ARRAY_RO || (err && cmd == STOP_ARRAY))
 		clear_bit(MD_CLOSING, &mddev->flags);
 	return err;
 }
-- 
2.43.0

[PATCH 5.10 035/238] aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts

[Sasha Levin]

From: Chun-Yi Lee <jlee@suse.com>

[ Upstream commit f98364e926626c678fb4b9004b75cacf92ff0662 ]

This patch is against CVE-2023-6270. The description of cve is:

  A flaw was found in the ATA over Ethernet (AoE) driver in the Linux
  kernel. The aoecmd_cfg_pkts() function improperly updates the refcnt on
  `struct net_device`, and a use-after-free can be triggered by racing
  between the free on the struct and the access through the `skbtxq`
  global queue. This could lead to a denial of service condition or
  potential code execution.

In aoecmd_cfg_pkts(), it always calls dev_put(ifp) when skb initial
code is finished. But the net_device ifp will still be used in
later tx()->dev_queue_xmit() in kthread. Which means that the
dev_put(ifp) should NOT be called in the success path of skb
initial code in aoecmd_cfg_pkts(). Otherwise tx() may run into
use-after-free because the net_device is freed.

This patch removed the dev_put(ifp) in the success path in
aoecmd_cfg_pkts(), and added dev_put() after skb xmit in tx().

Link: https://nvd.nist.gov/vuln/detail/CVE-2023-6270
Fixes: 7562f876cd93 ("[NET]: Rework dev_base via list_head (v3)")
Signed-off-by: Chun-Yi Lee <jlee@suse.com>
Link: https://lore.kernel.org/r/20240305082048.25526-1-jlee@suse.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/aoe/aoecmd.c | 12 ++++++------
 drivers/block/aoe/aoenet.c |  1 +
 2 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c
index 313f0b946fe2b..c805909c8e775 100644
--- a/drivers/block/aoe/aoecmd.c
+++ b/drivers/block/aoe/aoecmd.c
@@ -420,13 +420,16 @@ aoecmd_cfg_pkts(ushort aoemajor, unsigned char aoeminor, struct sk_buff_head *qu
 	rcu_read_lock();
 	for_each_netdev_rcu(&init_net, ifp) {
 		dev_hold(ifp);
-		if (!is_aoe_netif(ifp))
-			goto cont;
+		if (!is_aoe_netif(ifp)) {
+			dev_put(ifp);
+			continue;
+		}
 
 		skb = new_skb(sizeof *h + sizeof *ch);
 		if (skb == NULL) {
 			printk(KERN_INFO "aoe: skb alloc failure\n");
-			goto cont;
+			dev_put(ifp);
+			continue;
 		}
 		skb_put(skb, sizeof *h + sizeof *ch);
 		skb->dev = ifp;
@@ -441,9 +444,6 @@ aoecmd_cfg_pkts(ushort aoemajor, unsigned char aoeminor, struct sk_buff_head *qu
 		h->major = cpu_to_be16(aoemajor);
 		h->minor = aoeminor;
 		h->cmd = AOECMD_CFG;
-
-cont:
-		dev_put(ifp);
 	}
 	rcu_read_unlock();
 }
diff --git a/drivers/block/aoe/aoenet.c b/drivers/block/aoe/aoenet.c
index 63773a90581dd..1e66c7a188a12 100644
--- a/drivers/block/aoe/aoenet.c
+++ b/drivers/block/aoe/aoenet.c
@@ -64,6 +64,7 @@ tx(int id) __must_hold(&txlock)
 			pr_warn("aoe: packet could not be sent on %s.  %s\n",
 				ifp ? ifp->name : "netif",
 				"consider increasing tx_queue_len");
+		dev_put(ifp);
 		spin_lock_irq(&txlock);
 	}
 	return 0;
-- 
2.43.0

[PATCH 5.10 036/238] timekeeping: Fix cross-timestamp interpolation on counter wrap

[Sasha Levin]

From: Peter Hilber <peter.hilber@opensynergy.com>

[ Upstream commit 84dccadd3e2a3f1a373826ad71e5ced5e76b0c00 ]

cycle_between() decides whether get_device_system_crosststamp() will
interpolate for older counter readings.

cycle_between() yields wrong results for a counter wrap-around where after
< before < test, and for the case after < test < before.

Fix the comparison logic.

Fixes: 2c756feb18d9 ("time: Add history to cross timestamp interface supporting slower devices")
Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20231218073849.35294-2-peter.hilber@opensynergy.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/time/timekeeping.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index d9b48f7a35e0d..6a8a610b19717 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -1173,7 +1173,7 @@ static bool cycle_between(u64 before, u64 test, u64 after)
 {
 	if (test > before && test < after)
 		return true;
-	if (test < before && before > after)
+	if (before > after && (test > before || test < after))
 		return true;
 	return false;
 }
-- 
2.43.0

[PATCH 5.10 037/238] timekeeping: Fix cross-timestamp interpolation corner case decision

[Sasha Levin]

From: Peter Hilber <peter.hilber@opensynergy.com>

[ Upstream commit 87a41130881995f82f7adbafbfeddaebfb35f0ef ]

The cycle_between() helper checks if parameter test is in the open interval
(before, after). Colloquially speaking, this also applies to the counter
wrap-around special case before > after. get_device_system_crosststamp()
currently uses cycle_between() at the first call site to decide whether to
interpolate for older counter readings.

get_device_system_crosststamp() has the following problem with
cycle_between() testing against an open interval: Assume that, by chance,
cycles == tk->tkr_mono.cycle_last (in the following, "cycle_last" for
brevity). Then, cycle_between() at the first call site, with effective
argument values cycle_between(cycle_last, cycles, now), returns false,
enabling interpolation. During interpolation,
get_device_system_crosststamp() will then call cycle_between() at the
second call site (if a history_begin was supplied). The effective argument
values are cycle_between(history_begin->cycles, cycles, cycles), since
system_counterval.cycles == interval_start == cycles, per the assumption.
Due to the test against the open interval, cycle_between() returns false
again. This causes get_device_system_crosststamp() to return -EINVAL.

This failure should be avoided, since get_device_system_crosststamp() works
both when cycles follows cycle_last (no interpolation), and when cycles
precedes cycle_last (interpolation). For the case cycles == cycle_last,
interpolation is actually unneeded.

Fix this by changing cycle_between() into timestamp_in_interval(), which
now checks against the closed interval, rather than the open interval.

This changes the get_device_system_crosststamp() behavior for three corner
cases:

1. Bypass interpolation in the case cycles == tk->tkr_mono.cycle_last,
   fixing the problem described above.

2. At the first timestamp_in_interval() call site, cycles == now no longer
   causes failure.

3. At the second timestamp_in_interval() call site, history_begin->cycles
   == system_counterval.cycles no longer causes failure.
   adjust_historical_crosststamp() also works for this corner case,
   where partial_history_cycles == total_history_cycles.

These behavioral changes should not cause any problems.

Fixes: 2c756feb18d9 ("time: Add history to cross timestamp interface supporting slower devices")
Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231218073849.35294-3-peter.hilber@opensynergy.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/time/timekeeping.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 6a8a610b19717..6f615db414769 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -1167,13 +1167,15 @@ static int adjust_historical_crosststamp(struct system_time_snapshot *history,
 }
 
 /*
- * cycle_between - true if test occurs chronologically between before and after
+ * timestamp_in_interval - true if ts is chronologically in [start, end]
+ *
+ * True if ts occurs chronologically at or after start, and before or at end.
  */
-static bool cycle_between(u64 before, u64 test, u64 after)
+static bool timestamp_in_interval(u64 start, u64 end, u64 ts)
 {
-	if (test > before && test < after)
+	if (ts >= start && ts <= end)
 		return true;
-	if (before > after && (test > before || test < after))
+	if (start > end && (ts >= start || ts <= end))
 		return true;
 	return false;
 }
@@ -1233,7 +1235,7 @@ int get_device_system_crosststamp(int (*get_time_fn)
 		 */
 		now = tk_clock_read(&tk->tkr_mono);
 		interval_start = tk->tkr_mono.cycle_last;
-		if (!cycle_between(interval_start, cycles, now)) {
+		if (!timestamp_in_interval(interval_start, now, cycles)) {
 			clock_was_set_seq = tk->clock_was_set_seq;
 			cs_was_changed_seq = tk->cs_was_changed_seq;
 			cycles = interval_start;
@@ -1264,13 +1266,13 @@ int get_device_system_crosststamp(int (*get_time_fn)
 		bool discontinuity;
 
 		/*
-		 * Check that the counter value occurs after the provided
+		 * Check that the counter value is not before the provided
 		 * history reference and that the history doesn't cross a
 		 * clocksource change
 		 */
 		if (!history_begin ||
-		    !cycle_between(history_begin->cycles,
-				   system_counterval.cycles, cycles) ||
+		    !timestamp_in_interval(history_begin->cycles,
+					   cycles, system_counterval.cycles) ||
 		    history_begin->cs_was_changed_seq != cs_was_changed_seq)
 			return -EINVAL;
 		partial_history_cycles = cycles - system_counterval.cycles;
-- 
2.43.0

[PATCH 5.10 038/238] timekeeping: Fix cross-timestamp interpolation for non-x86

[Sasha Levin]

From: Peter Hilber <peter.hilber@opensynergy.com>

[ Upstream commit 14274d0bd31b4debf28284604589f596ad2e99f2 ]

So far, get_device_system_crosststamp() unconditionally passes
system_counterval.cycles to timekeeping_cycles_to_ns(). But when
interpolating system time (do_interp == true), system_counterval.cycles is
before tkr_mono.cycle_last, contrary to the timekeeping_cycles_to_ns()
expectations.

On x86, CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE will mitigate on
interpolating, setting delta to 0. With delta == 0, xtstamp->sys_monoraw
and xtstamp->sys_realtime are then set to the last update time, as
implicitly expected by adjust_historical_crosststamp(). On other
architectures, the resulting nonsense xtstamp->sys_monoraw and
xtstamp->sys_realtime corrupt the xtstamp (ts) adjustment in
adjust_historical_crosststamp().

Fix this by deriving xtstamp->sys_monoraw and xtstamp->sys_realtime from
the last update time when interpolating, by using the local variable
"cycles". The local variable already has the right value when
interpolating, unlike system_counterval.cycles.

Fixes: 2c756feb18d9 ("time: Add history to cross timestamp interface supporting slower devices")
Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20231218073849.35294-4-peter.hilber@opensynergy.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/time/timekeeping.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 6f615db414769..629a07e6a0bfc 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -1248,10 +1248,8 @@ int get_device_system_crosststamp(int (*get_time_fn)
 				      tk_core.timekeeper.offs_real);
 		base_raw = tk->tkr_raw.base;
 
-		nsec_real = timekeeping_cycles_to_ns(&tk->tkr_mono,
-						     system_counterval.cycles);
-		nsec_raw = timekeeping_cycles_to_ns(&tk->tkr_raw,
-						    system_counterval.cycles);
+		nsec_real = timekeeping_cycles_to_ns(&tk->tkr_mono, cycles);
+		nsec_raw = timekeeping_cycles_to_ns(&tk->tkr_raw, cycles);
 	} while (read_seqcount_retry(&tk_core.seq, seq));
 
 	xtstamp->sys_realtime = ktime_add_ns(base_real, nsec_real);
-- 
2.43.0

[PATCH 5.10 039/238] wifi: ath10k: fix NULL pointer dereference in ath10k_wmi_tlv_op_pull_mgmt_tx_compl_ev()

[Sasha Levin]

From: Xingyuan Mo <hdthky0@gmail.com>

[ Upstream commit ad25ee36f00172f7d53242dc77c69fff7ced0755 ]

We should check whether the WMI_TLV_TAG_STRUCT_MGMT_TX_COMPL_EVENT tlv is
present before accessing it, otherwise a null pointer deference error will
occur.

Fixes: dc405152bb64 ("ath10k: handle mgmt tx completion event")
Signed-off-by: Xingyuan Mo <hdthky0@gmail.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20231208043433.271449-1-hdthky0@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 4f2fbc610d798..0eeb74245372f 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -844,6 +844,10 @@ ath10k_wmi_tlv_op_pull_mgmt_tx_compl_ev(struct ath10k *ar, struct sk_buff *skb,
 	}
 
 	ev = tb[WMI_TLV_TAG_STRUCT_MGMT_TX_COMPL_EVENT];
+	if (!ev) {
+		kfree(tb);
+		return -EPROTO;
+	}
 
 	arg->desc_id = ev->desc_id;
 	arg->status = ev->status;
-- 
2.43.0

[PATCH 5.10 040/238] wifi: b43: Stop/wake correct queue in DMA Tx path when QoS is disabled

[Sasha Levin]

From: Rahul Rameshbabu <sergeantsagara@protonmail.com>

[ Upstream commit 9636951e4468f02c72cc75a82dc65d003077edbc ]

When QoS is disabled, the queue priority value will not map to the correct
ieee80211 queue since there is only one queue. Stop/wake queue 0 when QoS
is disabled to prevent trying to stop/wake a non-existent queue and failing
to stop/wake the actual queue instantiated.

Log of issue before change (with kernel parameter qos=0):
    [  +5.112651] ------------[ cut here ]------------
    [  +0.000005] WARNING: CPU: 7 PID: 25513 at net/mac80211/util.c:449 __ieee80211_wake_queue+0xd5/0x180 [mac80211]
    [  +0.000067] Modules linked in: b43(O) snd_seq_dummy snd_hrtimer snd_seq snd_seq_device nft_chain_nat xt_MASQUERADE nf_nat xfrm_user xfrm_algo xt_addrtype overlay ccm af_packet amdgpu snd_hda_codec_cirrus snd_hda_codec_generic ledtrig_audio drm_exec amdxcp gpu_sched xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip6t_rpfilter ipt_rpfilter xt_pkttype xt_LOG nf_log_syslog xt_tcpudp nft_compat nf_tables nfnetlink sch_fq_codel btusb uinput iTCO_wdt ctr btrtl intel_pmc_bxt i915 intel_rapl_msr mei_hdcp mei_pxp joydev at24 watchdog btintel atkbd libps2 serio radeon btbcm vivaldi_fmap btmtk intel_rapl_common snd_hda_codec_hdmi bluetooth uvcvideo nls_iso8859_1 applesmc nls_cp437 x86_pkg_temp_thermal snd_hda_intel intel_powerclamp vfat videobuf2_vmalloc coretemp fat snd_intel_dspcfg crc32_pclmul uvc polyval_clmulni snd_intel_sdw_acpi loop videobuf2_memops snd_hda_codec tun drm_suballoc_helper polyval_generic drm_ttm_helper drm_buddy tap ecdh_generic videobuf2_v4l2 gf128mul macvlan ttm ghash_clmulni_intel ecc tg3
    [  +0.000044]  videodev bridge snd_hda_core rapl crc16 drm_display_helper cec mousedev snd_hwdep evdev intel_cstate bcm5974 hid_appleir videobuf2_common stp mac_hid libphy snd_pcm drm_kms_helper acpi_als mei_me intel_uncore llc mc snd_timer intel_gtt industrialio_triggered_buffer apple_mfi_fastcharge i2c_i801 mei snd lpc_ich agpgart ptp i2c_smbus thunderbolt apple_gmux i2c_algo_bit kfifo_buf video industrialio soundcore pps_core wmi tiny_power_button sbs sbshc button ac cordic bcma mac80211 cfg80211 ssb rfkill libarc4 kvm_intel kvm drm irqbypass fuse backlight firmware_class efi_pstore configfs efivarfs dmi_sysfs ip_tables x_tables autofs4 dm_crypt cbc encrypted_keys trusted asn1_encoder tee tpm rng_core input_leds hid_apple led_class hid_generic usbhid hid sd_mod t10_pi crc64_rocksoft crc64 crc_t10dif crct10dif_generic ahci libahci libata uhci_hcd ehci_pci ehci_hcd crct10dif_pclmul crct10dif_common sha512_ssse3 sha512_generic sha256_ssse3 sha1_ssse3 aesni_intel usbcore scsi_mod libaes crypto_simd cryptd scsi_common
    [  +0.000055]  usb_common rtc_cmos btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_snapshot dm_bufio dm_mod dax [last unloaded: b43(O)]
    [  +0.000009] CPU: 7 PID: 25513 Comm: irq/17-b43 Tainted: G        W  O       6.6.7 #1-NixOS
    [  +0.000003] Hardware name: Apple Inc. MacBookPro8,3/Mac-942459F5819B171B, BIOS 87.0.0.0.0 06/13/2019
    [  +0.000001] RIP: 0010:__ieee80211_wake_queue+0xd5/0x180 [mac80211]
    [  +0.000046] Code: 00 45 85 e4 0f 85 9b 00 00 00 48 8d bd 40 09 00 00 f0 48 0f ba ad 48 09 00 00 00 72 0f 5b 5d 41 5c 41 5d 41 5e e9 cb 6d 3c d0 <0f> 0b 5b 5d 41 5c 41 5d 41 5e c3 cc cc cc cc 48 8d b4 16 94 00 00
    [  +0.000002] RSP: 0018:ffffc90003c77d60 EFLAGS: 00010097
    [  +0.000001] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 0000000000000000
    [  +0.000001] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff88820b924900
    [  +0.000002] RBP: ffff88820b924900 R08: ffffc90003c77d90 R09: 000000000003bfd0
    [  +0.000001] R10: ffff88820b924900 R11: ffffc90003c77c68 R12: 0000000000000000
    [  +0.000001] R13: 0000000000000000 R14: ffffc90003c77d90 R15: ffffffffc0fa6f40
    [  +0.000001] FS:  0000000000000000(0000) GS:ffff88846fb80000(0000) knlGS:0000000000000000
    [  +0.000001] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    [  +0.000001] CR2: 00007fafda7ae008 CR3: 000000046d220005 CR4: 00000000000606e0
    [  +0.000002] Call Trace:
    [  +0.000003]  <TASK>
    [  +0.000001]  ? __ieee80211_wake_queue+0xd5/0x180 [mac80211]
    [  +0.000044]  ? __warn+0x81/0x130
    [  +0.000005]  ? __ieee80211_wake_queue+0xd5/0x180 [mac80211]
    [  +0.000045]  ? report_bug+0x171/0x1a0
    [  +0.000004]  ? handle_bug+0x41/0x70
    [  +0.000004]  ? exc_invalid_op+0x17/0x70
    [  +0.000003]  ? asm_exc_invalid_op+0x1a/0x20
    [  +0.000005]  ? __ieee80211_wake_queue+0xd5/0x180 [mac80211]
    [  +0.000043]  ieee80211_wake_queue+0x4a/0x80 [mac80211]
    [  +0.000044]  b43_dma_handle_txstatus+0x29c/0x3a0 [b43]
    [  +0.000016]  ? __pfx_irq_thread_fn+0x10/0x10
    [  +0.000002]  b43_handle_txstatus+0x61/0x80 [b43]
    [  +0.000012]  b43_interrupt_thread_handler+0x3f9/0x6b0 [b43]
    [  +0.000011]  irq_thread_fn+0x23/0x60
    [  +0.000002]  irq_thread+0xfe/0x1c0
    [  +0.000002]  ? __pfx_irq_thread_dtor+0x10/0x10
    [  +0.000001]  ? __pfx_irq_thread+0x10/0x10
    [  +0.000001]  kthread+0xe8/0x120
    [  +0.000003]  ? __pfx_kthread+0x10/0x10
    [  +0.000003]  ret_from_fork+0x34/0x50
    [  +0.000002]  ? __pfx_kthread+0x10/0x10
    [  +0.000002]  ret_from_fork_asm+0x1b/0x30
    [  +0.000004]  </TASK>
    [  +0.000001] ---[ end trace 0000000000000000 ]---

    [  +0.000065] ------------[ cut here ]------------
    [  +0.000001] WARNING: CPU: 0 PID: 56077 at net/mac80211/util.c:514 __ieee80211_stop_queue+0xcc/0xe0 [mac80211]
    [  +0.000077] Modules linked in: b43(O) snd_seq_dummy snd_hrtimer snd_seq snd_seq_device nft_chain_nat xt_MASQUERADE nf_nat xfrm_user xfrm_algo xt_addrtype overlay ccm af_packet amdgpu snd_hda_codec_cirrus snd_hda_codec_generic ledtrig_audio drm_exec amdxcp gpu_sched xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip6t_rpfilter ipt_rpfilter xt_pkttype xt_LOG nf_log_syslog xt_tcpudp nft_compat nf_tables nfnetlink sch_fq_codel btusb uinput iTCO_wdt ctr btrtl intel_pmc_bxt i915 intel_rapl_msr mei_hdcp mei_pxp joydev at24 watchdog btintel atkbd libps2 serio radeon btbcm vivaldi_fmap btmtk intel_rapl_common snd_hda_codec_hdmi bluetooth uvcvideo nls_iso8859_1 applesmc nls_cp437 x86_pkg_temp_thermal snd_hda_intel intel_powerclamp vfat videobuf2_vmalloc coretemp fat snd_intel_dspcfg crc32_pclmul uvc polyval_clmulni snd_intel_sdw_acpi loop videobuf2_memops snd_hda_codec tun drm_suballoc_helper polyval_generic drm_ttm_helper drm_buddy tap ecdh_generic videobuf2_v4l2 gf128mul macvlan ttm ghash_clmulni_intel ecc tg3
    [  +0.000073]  videodev bridge snd_hda_core rapl crc16 drm_display_helper cec mousedev snd_hwdep evdev intel_cstate bcm5974 hid_appleir videobuf2_common stp mac_hid libphy snd_pcm drm_kms_helper acpi_als mei_me intel_uncore llc mc snd_timer intel_gtt industrialio_triggered_buffer apple_mfi_fastcharge i2c_i801 mei snd lpc_ich agpgart ptp i2c_smbus thunderbolt apple_gmux i2c_algo_bit kfifo_buf video industrialio soundcore pps_core wmi tiny_power_button sbs sbshc button ac cordic bcma mac80211 cfg80211 ssb rfkill libarc4 kvm_intel kvm drm irqbypass fuse backlight firmware_class efi_pstore configfs efivarfs dmi_sysfs ip_tables x_tables autofs4 dm_crypt cbc encrypted_keys trusted asn1_encoder tee tpm rng_core input_leds hid_apple led_class hid_generic usbhid hid sd_mod t10_pi crc64_rocksoft crc64 crc_t10dif crct10dif_generic ahci libahci libata uhci_hcd ehci_pci ehci_hcd crct10dif_pclmul crct10dif_common sha512_ssse3 sha512_generic sha256_ssse3 sha1_ssse3 aesni_intel usbcore scsi_mod libaes crypto_simd cryptd scsi_common
    [  +0.000084]  usb_common rtc_cmos btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_snapshot dm_bufio dm_mod dax [last unloaded: b43]
    [  +0.000012] CPU: 0 PID: 56077 Comm: kworker/u16:17 Tainted: G        W  O       6.6.7 #1-NixOS
    [  +0.000003] Hardware name: Apple Inc. MacBookPro8,3/Mac-942459F5819B171B, BIOS 87.0.0.0.0 06/13/2019
    [  +0.000001] Workqueue: phy7 b43_tx_work [b43]
    [  +0.000019] RIP: 0010:__ieee80211_stop_queue+0xcc/0xe0 [mac80211]
    [  +0.000076] Code: 74 11 48 8b 78 08 0f b7 d6 89 e9 4c 89 e6 e8 ab f4 00 00 65 ff 0d 9c b7 34 3f 0f 85 55 ff ff ff 0f 1f 44 00 00 e9 4b ff ff ff <0f> 0b 5b 5d 41 5c 41 5d c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90
    [  +0.000002] RSP: 0000:ffffc90004157d50 EFLAGS: 00010097
    [  +0.000002] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 0000000000000000
    [  +0.000002] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff8882d65d0900
    [  +0.000002] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001
    [  +0.000001] R10: 00000000000000ff R11: ffff88814d0155a0 R12: ffff8882d65d0900
    [  +0.000002] R13: 0000000000000000 R14: ffff8881002d2800 R15: 00000000000000d0
    [  +0.000002] FS:  0000000000000000(0000) GS:ffff88846f800000(0000) knlGS:0000000000000000
    [  +0.000003] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    [  +0.000002] CR2: 00007f2e8c10c880 CR3: 0000000385b66005 CR4: 00000000000606f0
    [  +0.000002] Call Trace:
    [  +0.000001]  <TASK>
    [  +0.000001]  ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211]
    [  +0.000075]  ? __warn+0x81/0x130
    [  +0.000004]  ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211]
    [  +0.000075]  ? report_bug+0x171/0x1a0
    [  +0.000005]  ? handle_bug+0x41/0x70
    [  +0.000003]  ? exc_invalid_op+0x17/0x70
    [  +0.000004]  ? asm_exc_invalid_op+0x1a/0x20
    [  +0.000004]  ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211]
    [  +0.000076]  ieee80211_stop_queue+0x36/0x50 [mac80211]
    [  +0.000077]  b43_dma_tx+0x550/0x780 [b43]
    [  +0.000023]  b43_tx_work+0x90/0x130 [b43]
    [  +0.000018]  process_one_work+0x174/0x340
    [  +0.000003]  worker_thread+0x27b/0x3a0
    [  +0.000004]  ? __pfx_worker_thread+0x10/0x10
    [  +0.000002]  kthread+0xe8/0x120
    [  +0.000003]  ? __pfx_kthread+0x10/0x10
    [  +0.000004]  ret_from_fork+0x34/0x50
    [  +0.000002]  ? __pfx_kthread+0x10/0x10
    [  +0.000003]  ret_from_fork_asm+0x1b/0x30
    [  +0.000006]  </TASK>
    [  +0.000001] ---[ end trace 0000000000000000 ]---

Fixes: e6f5b934fba8 ("b43: Add QOS support")
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231231050300.122806-2-sergeantsagara@protonmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/b43/b43.h | 16 ++++++++++++++++
 drivers/net/wireless/broadcom/b43/dma.c |  4 ++--
 2 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/b43/b43.h b/drivers/net/wireless/broadcom/b43/b43.h
index 67b4bac048e58..c0d8fc0b22fb2 100644
--- a/drivers/net/wireless/broadcom/b43/b43.h
+++ b/drivers/net/wireless/broadcom/b43/b43.h
@@ -1082,6 +1082,22 @@ static inline bool b43_using_pio_transfers(struct b43_wldev *dev)
 	return dev->__using_pio_transfers;
 }
 
+static inline void b43_wake_queue(struct b43_wldev *dev, int queue_prio)
+{
+	if (dev->qos_enabled)
+		ieee80211_wake_queue(dev->wl->hw, queue_prio);
+	else
+		ieee80211_wake_queue(dev->wl->hw, 0);
+}
+
+static inline void b43_stop_queue(struct b43_wldev *dev, int queue_prio)
+{
+	if (dev->qos_enabled)
+		ieee80211_stop_queue(dev->wl->hw, queue_prio);
+	else
+		ieee80211_stop_queue(dev->wl->hw, 0);
+}
+
 /* Message printing */
 __printf(2, 3) void b43info(struct b43_wl *wl, const char *fmt, ...);
 __printf(2, 3) void b43err(struct b43_wl *wl, const char *fmt, ...);
diff --git a/drivers/net/wireless/broadcom/b43/dma.c b/drivers/net/wireless/broadcom/b43/dma.c
index 9a7c62bd5e431..cfaf2f9d67b22 100644
--- a/drivers/net/wireless/broadcom/b43/dma.c
+++ b/drivers/net/wireless/broadcom/b43/dma.c
@@ -1399,7 +1399,7 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb)
 	    should_inject_overflow(ring)) {
 		/* This TX ring is full. */
 		unsigned int skb_mapping = skb_get_queue_mapping(skb);
-		ieee80211_stop_queue(dev->wl->hw, skb_mapping);
+		b43_stop_queue(dev, skb_mapping);
 		dev->wl->tx_queue_stopped[skb_mapping] = true;
 		ring->stopped = true;
 		if (b43_debug(dev, B43_DBG_DMAVERBOSE)) {
@@ -1570,7 +1570,7 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev,
 	} else {
 		/* If the driver queue is running wake the corresponding
 		 * mac80211 queue. */
-		ieee80211_wake_queue(dev->wl->hw, ring->queue_prio);
+		b43_wake_queue(dev, ring->queue_prio);
 		if (b43_debug(dev, B43_DBG_DMAVERBOSE)) {
 			b43dbg(dev->wl, "Woke up TX ring %d\n", ring->index);
 		}
-- 
2.43.0

[PATCH 5.10 041/238] wifi: b43: Stop/wake correct queue in PIO Tx path when QoS is disabled

[Sasha Levin]

From: Rahul Rameshbabu <sergeantsagara@protonmail.com>

[ Upstream commit 77135a38f6c2f950d2306ac3d37cbb407e6243f2 ]

When QoS is disabled, the queue priority value will not map to the correct
ieee80211 queue since there is only one queue. Stop/wake queue 0 when QoS
is disabled to prevent trying to stop/wake a non-existent queue and failing
to stop/wake the actual queue instantiated.

Fixes: 5100d5ac81b9 ("b43: Add PIO support for PCMCIA devices")
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231231050300.122806-3-sergeantsagara@protonmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/b43/pio.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/broadcom/b43/pio.c b/drivers/net/wireless/broadcom/b43/pio.c
index 8c28a9250cd19..cc19b589fa70d 100644
--- a/drivers/net/wireless/broadcom/b43/pio.c
+++ b/drivers/net/wireless/broadcom/b43/pio.c
@@ -525,7 +525,7 @@ int b43_pio_tx(struct b43_wldev *dev, struct sk_buff *skb)
 	if (total_len > (q->buffer_size - q->buffer_used)) {
 		/* Not enough memory on the queue. */
 		err = -EBUSY;
-		ieee80211_stop_queue(dev->wl->hw, skb_get_queue_mapping(skb));
+		b43_stop_queue(dev, skb_get_queue_mapping(skb));
 		q->stopped = true;
 		goto out;
 	}
@@ -552,7 +552,7 @@ int b43_pio_tx(struct b43_wldev *dev, struct sk_buff *skb)
 	if (((q->buffer_size - q->buffer_used) < roundup(2 + 2 + 6, 4)) ||
 	    (q->free_packet_slots == 0)) {
 		/* The queue is full. */
-		ieee80211_stop_queue(dev->wl->hw, skb_get_queue_mapping(skb));
+		b43_stop_queue(dev, skb_get_queue_mapping(skb));
 		q->stopped = true;
 	}
 
@@ -587,7 +587,7 @@ void b43_pio_handle_txstatus(struct b43_wldev *dev,
 	list_add(&pack->list, &q->packets_list);
 
 	if (q->stopped) {
-		ieee80211_wake_queue(dev->wl->hw, q->queue_prio);
+		b43_wake_queue(dev, q->queue_prio);
 		q->stopped = false;
 	}
 }
-- 
2.43.0

[PATCH 5.10 042/238] wifi: b43: Stop correct queue in DMA worker when QoS is disabled

[Sasha Levin]

From: Rahul Rameshbabu <sergeantsagara@protonmail.com>

[ Upstream commit 581c8967d66c4961076dbbee356834e9c6777184 ]

When QoS is disabled, the queue priority value will not map to the correct
ieee80211 queue since there is only one queue. Stop queue 0 when QoS is
disabled to prevent trying to stop a non-existent queue and failing to stop
the actual queue instantiated.

Fixes: bad691946966 ("b43: avoid packet losses in the dma worker code.")
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231231050300.122806-4-sergeantsagara@protonmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/b43/main.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/broadcom/b43/main.c b/drivers/net/wireless/broadcom/b43/main.c
index f175dbaffc300..6100c0d2a7f3c 100644
--- a/drivers/net/wireless/broadcom/b43/main.c
+++ b/drivers/net/wireless/broadcom/b43/main.c
@@ -3603,7 +3603,7 @@ static void b43_tx_work(struct work_struct *work)
 				err = b43_dma_tx(dev, skb);
 			if (err == -ENOSPC) {
 				wl->tx_queue_stopped[queue_num] = true;
-				ieee80211_stop_queue(wl->hw, queue_num);
+				b43_stop_queue(dev, queue_num);
 				skb_queue_head(&wl->tx_queue[queue_num], skb);
 				break;
 			}
@@ -3627,6 +3627,7 @@ static void b43_op_tx(struct ieee80211_hw *hw,
 		      struct sk_buff *skb)
 {
 	struct b43_wl *wl = hw_to_b43_wl(hw);
+	u16 skb_queue_mapping;
 
 	if (unlikely(skb->len < 2 + 2 + 6)) {
 		/* Too short, this can't be a valid frame. */
@@ -3635,12 +3636,12 @@ static void b43_op_tx(struct ieee80211_hw *hw,
 	}
 	B43_WARN_ON(skb_shinfo(skb)->nr_frags);
 
-	skb_queue_tail(&wl->tx_queue[skb->queue_mapping], skb);
-	if (!wl->tx_queue_stopped[skb->queue_mapping]) {
+	skb_queue_mapping = skb_get_queue_mapping(skb);
+	skb_queue_tail(&wl->tx_queue[skb_queue_mapping], skb);
+	if (!wl->tx_queue_stopped[skb_queue_mapping])
 		ieee80211_queue_work(wl->hw, &wl->tx_work);
-	} else {
-		ieee80211_stop_queue(wl->hw, skb->queue_mapping);
-	}
+	else
+		b43_stop_queue(wl->current_dev, skb_queue_mapping);
 }
 
 static void b43_qos_params_upload(struct b43_wldev *dev,
-- 
2.43.0

[PATCH 5.10 043/238] wifi: b43: Disable QoS for bcm4331

[Sasha Levin]

From: Rahul Rameshbabu <sergeantsagara@protonmail.com>

[ Upstream commit 09795bded2e725443fe4a4803cae2079cdaf7b26 ]

bcm4331 seems to not function correctly with QoS support. This may be due
to issues with currently available firmware or potentially a device
specific issue.

When queues that are not of the default "best effort" priority are
selected, traffic appears to not transmit out of the hardware while no
errors are returned. This behavior is present among all the other priority
queues: video, voice, and background. While this can be worked around by
setting a kernel parameter, the default behavior is problematic for most
users and may be difficult to debug. This patch offers a working out-of-box
experience for bcm4331 users.

Log of the issue (using ssh low-priority traffic as an example):
    ssh -T -vvvv git@github.com
    OpenSSH_9.6p1, OpenSSL 3.0.12 24 Oct 2023
    debug1: Reading configuration data /etc/ssh/ssh_config
    debug2: checking match for 'host * exec "/nix/store/q1c2flcykgr4wwg5a6h450hxbk4ch589-bash-5.2-p15/bin/bash -c '/nix/store/c015armnkhr6v18za0rypm7sh1i8js8w-gnupg-2.4.1/bin/gpg-connect-agent --quiet updatestartuptty /bye >/dev/null 2>&1'"' host github.com originally github.com
    debug3: /etc/ssh/ssh_config line 5: matched 'host "github.com"'
    debug1: Executing command: '/nix/store/q1c2flcykgr4wwg5a6h450hxbk4ch589-bash-5.2-p15/bin/bash -c '/nix/store/c015armnkhr6v18za0rypm7sh1i8js8w-gnupg-2.4.1/bin/gpg-connect-agent --quiet updatestartuptty /bye >/dev/null 2>&1''
    debug3: command returned status 0
    debug3: /etc/ssh/ssh_config line 5: matched 'exec "/nix/store/q1c2flcykgr4wwg5a6h450hxbk4ch589-bash-5.2-p15/bin/bash -c '/nix/store/c015armnkhr6v18za0r"'
    debug2: match found
    debug1: /etc/ssh/ssh_config line 9: Applying options for *
    debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts' -> '/home/binary-eater/.ssh/known_hosts'
    debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts2' -> '/home/binary-eater/.ssh/known_hosts2'
    debug2: resolving "github.com" port 22
    debug3: resolve_host: lookup github.com:22
    debug3: channel_clear_timeouts: clearing
    debug3: ssh_connect_direct: entering
    debug1: Connecting to github.com [192.30.255.113] port 22.
    debug3: set_sock_tos: set socket 3 IP_TOS 0x48

Fixes: e6f5b934fba8 ("b43: Add QOS support")
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231231050300.122806-5-sergeantsagara@protonmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/b43/main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/b43/main.c b/drivers/net/wireless/broadcom/b43/main.c
index 6100c0d2a7f3c..29f97ab9b72a6 100644
--- a/drivers/net/wireless/broadcom/b43/main.c
+++ b/drivers/net/wireless/broadcom/b43/main.c
@@ -2587,7 +2587,8 @@ static void b43_request_firmware(struct work_struct *work)
 
 start_ieee80211:
 	wl->hw->queues = B43_QOS_QUEUE_NUM;
-	if (!modparam_qos || dev->fw.opensource)
+	if (!modparam_qos || dev->fw.opensource ||
+	    dev->dev->chip_id == BCMA_CHIP_ID_BCM4331)
 		wl->hw->queues = 1;
 
 	err = ieee80211_register_hw(wl->hw);
-- 
2.43.0

[PATCH 5.10 044/238] wifi: wilc1000: fix declarations ordering

[Sasha Levin]

From: Alexis Lothoré <alexis.lothore@bootlin.com>

[ Upstream commit 535733e90e5d8912ebeccebb05b354a2d06ff459 ]

Reorder parameters declaration in wilc_parse_join_bss_param to enforce
reverse christmas tree

Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240105075733.36331-2-alexis.lothore@bootlin.com
Stable-dep-of: 205c50306acf ("wifi: wilc1000: fix RCU usage in connect path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/microchip/wilc1000/hif.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/microchip/wilc1000/hif.c b/drivers/net/wireless/microchip/wilc1000/hif.c
index 884f45e627a72..bff33f39605b9 100644
--- a/drivers/net/wireless/microchip/wilc1000/hif.c
+++ b/drivers/net/wireless/microchip/wilc1000/hif.c
@@ -359,13 +359,13 @@ static void handle_connect_timeout(struct work_struct *work)
 void *wilc_parse_join_bss_param(struct cfg80211_bss *bss,
 				struct cfg80211_crypto_settings *crypto)
 {
-	struct wilc_join_bss_param *param;
-	struct ieee80211_p2p_noa_attr noa_attr;
-	u8 rates_len = 0;
+	const struct cfg80211_bss_ies *ies = rcu_dereference(bss->ies);
 	const u8 *tim_elm, *ssid_elm, *rates_ie, *supp_rates_ie;
 	const u8 *ht_ie, *wpa_ie, *wmm_ie, *rsn_ie;
+	struct ieee80211_p2p_noa_attr noa_attr;
+	struct wilc_join_bss_param *param;
+	u8 rates_len = 0;
 	int ret;
-	const struct cfg80211_bss_ies *ies = rcu_dereference(bss->ies);
 
 	param = kzalloc(sizeof(*param), GFP_KERNEL);
 	if (!param)
-- 
2.43.0

[PATCH 5.10 045/238] wifi: wilc1000: fix RCU usage in connect path

[Sasha Levin]

From: Alexis Lothoré <alexis.lothore@bootlin.com>

[ Upstream commit 205c50306acf58a335eb19fa84e40140f4fe814f ]

With lockdep enabled, calls to the connect function from cfg802.11 layer
lead to the following warning:

=============================
WARNING: suspicious RCU usage
6.7.0-rc1-wt+ #333 Not tainted
-----------------------------
drivers/net/wireless/microchip/wilc1000/hif.c:386
suspicious rcu_dereference_check() usage!
[...]
stack backtrace:
CPU: 0 PID: 100 Comm: wpa_supplicant Not tainted 6.7.0-rc1-wt+ #333
Hardware name: Atmel SAMA5
 unwind_backtrace from show_stack+0x18/0x1c
 show_stack from dump_stack_lvl+0x34/0x48
 dump_stack_lvl from wilc_parse_join_bss_param+0x7dc/0x7f4
 wilc_parse_join_bss_param from connect+0x2c4/0x648
 connect from cfg80211_connect+0x30c/0xb74
 cfg80211_connect from nl80211_connect+0x860/0xa94
 nl80211_connect from genl_rcv_msg+0x3fc/0x59c
 genl_rcv_msg from netlink_rcv_skb+0xd0/0x1f8
 netlink_rcv_skb from genl_rcv+0x2c/0x3c
 genl_rcv from netlink_unicast+0x3b0/0x550
 netlink_unicast from netlink_sendmsg+0x368/0x688
 netlink_sendmsg from ____sys_sendmsg+0x190/0x430
 ____sys_sendmsg from ___sys_sendmsg+0x110/0x158
 ___sys_sendmsg from sys_sendmsg+0xe8/0x150
 sys_sendmsg from ret_fast_syscall+0x0/0x1c

This warning is emitted because in the connect path, when trying to parse
target BSS parameters, we dereference a RCU pointer whithout being in RCU
critical section.
Fix RCU dereference usage by moving it to a RCU read critical section. To
avoid wrapping the whole wilc_parse_join_bss_param under the critical
section, just use the critical section to copy ies data

Fixes: c460495ee072 ("staging: wilc1000: fix incorrent type in initializer")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240105075733.36331-3-alexis.lothore@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/microchip/wilc1000/hif.c | 36 ++++++++++++-------
 1 file changed, 24 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/microchip/wilc1000/hif.c b/drivers/net/wireless/microchip/wilc1000/hif.c
index bff33f39605b9..457386f9de990 100644
--- a/drivers/net/wireless/microchip/wilc1000/hif.c
+++ b/drivers/net/wireless/microchip/wilc1000/hif.c
@@ -359,38 +359,49 @@ static void handle_connect_timeout(struct work_struct *work)
 void *wilc_parse_join_bss_param(struct cfg80211_bss *bss,
 				struct cfg80211_crypto_settings *crypto)
 {
-	const struct cfg80211_bss_ies *ies = rcu_dereference(bss->ies);
-	const u8 *tim_elm, *ssid_elm, *rates_ie, *supp_rates_ie;
+	const u8 *ies_data, *tim_elm, *ssid_elm, *rates_ie, *supp_rates_ie;
 	const u8 *ht_ie, *wpa_ie, *wmm_ie, *rsn_ie;
 	struct ieee80211_p2p_noa_attr noa_attr;
+	const struct cfg80211_bss_ies *ies;
 	struct wilc_join_bss_param *param;
-	u8 rates_len = 0;
+	u8 rates_len = 0, ies_len;
 	int ret;
 
 	param = kzalloc(sizeof(*param), GFP_KERNEL);
 	if (!param)
 		return NULL;
 
+	rcu_read_lock();
+	ies = rcu_dereference(bss->ies);
+	ies_data = kmemdup(ies->data, ies->len, GFP_ATOMIC);
+	if (!ies_data) {
+		rcu_read_unlock();
+		kfree(param);
+		return NULL;
+	}
+	ies_len = ies->len;
+	rcu_read_unlock();
+
 	param->beacon_period = cpu_to_le16(bss->beacon_interval);
 	param->cap_info = cpu_to_le16(bss->capability);
 	param->bss_type = WILC_FW_BSS_TYPE_INFRA;
 	param->ch = ieee80211_frequency_to_channel(bss->channel->center_freq);
 	ether_addr_copy(param->bssid, bss->bssid);
 
-	ssid_elm = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len);
+	ssid_elm = cfg80211_find_ie(WLAN_EID_SSID, ies_data, ies_len);
 	if (ssid_elm) {
 		if (ssid_elm[1] <= IEEE80211_MAX_SSID_LEN)
 			memcpy(param->ssid, ssid_elm + 2, ssid_elm[1]);
 	}
 
-	tim_elm = cfg80211_find_ie(WLAN_EID_TIM, ies->data, ies->len);
+	tim_elm = cfg80211_find_ie(WLAN_EID_TIM, ies_data, ies_len);
 	if (tim_elm && tim_elm[1] >= 2)
 		param->dtim_period = tim_elm[3];
 
 	memset(param->p_suites, 0xFF, 3);
 	memset(param->akm_suites, 0xFF, 3);
 
-	rates_ie = cfg80211_find_ie(WLAN_EID_SUPP_RATES, ies->data, ies->len);
+	rates_ie = cfg80211_find_ie(WLAN_EID_SUPP_RATES, ies_data, ies_len);
 	if (rates_ie) {
 		rates_len = rates_ie[1];
 		if (rates_len > WILC_MAX_RATES_SUPPORTED)
@@ -401,7 +412,7 @@ void *wilc_parse_join_bss_param(struct cfg80211_bss *bss,
 
 	if (rates_len < WILC_MAX_RATES_SUPPORTED) {
 		supp_rates_ie = cfg80211_find_ie(WLAN_EID_EXT_SUPP_RATES,
-						 ies->data, ies->len);
+						 ies_data, ies_len);
 		if (supp_rates_ie) {
 			u8 ext_rates = supp_rates_ie[1];
 
@@ -416,11 +427,11 @@ void *wilc_parse_join_bss_param(struct cfg80211_bss *bss,
 		}
 	}
 
-	ht_ie = cfg80211_find_ie(WLAN_EID_HT_CAPABILITY, ies->data, ies->len);
+	ht_ie = cfg80211_find_ie(WLAN_EID_HT_CAPABILITY, ies_data, ies_len);
 	if (ht_ie)
 		param->ht_capable = true;
 
-	ret = cfg80211_get_p2p_attr(ies->data, ies->len,
+	ret = cfg80211_get_p2p_attr(ies_data, ies_len,
 				    IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
 				    (u8 *)&noa_attr, sizeof(noa_attr));
 	if (ret > 0) {
@@ -444,7 +455,7 @@ void *wilc_parse_join_bss_param(struct cfg80211_bss *bss,
 	}
 	wmm_ie = cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT,
 					 WLAN_OUI_TYPE_MICROSOFT_WMM,
-					 ies->data, ies->len);
+					 ies_data, ies_len);
 	if (wmm_ie) {
 		struct ieee80211_wmm_param_ie *ie;
 
@@ -459,13 +470,13 @@ void *wilc_parse_join_bss_param(struct cfg80211_bss *bss,
 
 	wpa_ie = cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT,
 					 WLAN_OUI_TYPE_MICROSOFT_WPA,
-					 ies->data, ies->len);
+					 ies_data, ies_len);
 	if (wpa_ie) {
 		param->mode_802_11i = 1;
 		param->rsn_found = true;
 	}
 
-	rsn_ie = cfg80211_find_ie(WLAN_EID_RSN, ies->data, ies->len);
+	rsn_ie = cfg80211_find_ie(WLAN_EID_RSN, ies_data, ies_len);
 	if (rsn_ie) {
 		int rsn_ie_len = sizeof(struct element) + rsn_ie[1];
 		int offset = 8;
@@ -499,6 +510,7 @@ void *wilc_parse_join_bss_param(struct cfg80211_bss *bss,
 			param->akm_suites[i] = crypto->akm_suites[i] & 0xFF;
 	}
 
+	kfree(ies_data);
 	return (void *)param;
 }
 
-- 
2.43.0

[PATCH 5.10 046/238] wifi: rtl8xxxu: add cancel_work_sync() for c2hcmd_work

[Sasha Levin]

From: Martin Kaistra <martin.kaistra@linutronix.de>

[ Upstream commit 1213acb478a7181cd73eeaf00db430f1e45b1361 ]

The workqueue might still be running, when the driver is stopped. To
avoid a use-after-free, call cancel_work_sync() in rtl8xxxu_stop().

Fixes: e542e66b7c2e ("rtl8xxxu: add bluetooth co-existence support for single antenna")
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240111163628.320697-2-martin.kaistra@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 3051fb358fdd5..9efc15e69ae82 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -6483,6 +6483,7 @@ static void rtl8xxxu_stop(struct ieee80211_hw *hw)
 	if (priv->usb_interrupts)
 		rtl8xxxu_write32(priv, REG_USB_HIMR, 0);
 
+	cancel_work_sync(&priv->c2hcmd_work);
 	cancel_delayed_work_sync(&priv->ra_watchdog);
 
 	rtl8xxxu_free_rx_resources(priv);
-- 
2.43.0

[PATCH 5.10 047/238] wifi: wilc1000: fix multi-vif management when deleting a vif

[Sasha Levin]

From: Ajay Singh <ajay.kathat@microchip.com>

[ Upstream commit 12cfc9c8d3faf887a202c89bc312202445fca7e8 ]

Adding then removing a second vif currently makes the first vif not working
anymore. This is visible for example when we have a first interface
connected to some access point:
- create a wpa_supplicant.conf with some AP credentials
- wpa_supplicant -Dnl80211 -c /etc/wpa_supplicant.conf -i wlan0
- dhclient wlan0
- iw phy phy0 interface add wlan1 type managed
- iw dev wlan1 del
wlan0 does not manage properly traffic anymore (eg: ping not working)

This is due to vif mode being incorrectly reconfigured with some default
values in del_virtual_intf, affecting by default first vif.

Prevent first vif from being affected on second vif removal by removing vif
mode change command in del_virtual_intf

Fixes: 9bc061e88054 ("staging: wilc1000: added support to dynamically add/remove interfaces")
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Co-developed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240115-wilc_1000_fixes-v1-5-54d29463a738@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/microchip/wilc1000/cfg80211.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/wireless/microchip/wilc1000/cfg80211.c b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
index dd26f20861807..5d4f9e9a81e05 100644
--- a/drivers/net/wireless/microchip/wilc1000/cfg80211.c
+++ b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
@@ -1562,7 +1562,6 @@ static int del_virtual_intf(struct wiphy *wiphy, struct wireless_dev *wdev)
 	unregister_netdevice(vif->ndev);
 	vif->monitor_flag = 0;
 
-	wilc_set_operation_mode(vif, 0, 0, 0);
 	mutex_lock(&wl->vif_mutex);
 	list_del_rcu(&vif->list);
 	wl->vif_num--;
-- 
2.43.0

[PATCH 5.10 048/238] wifi: mwifiex: debugfs: Drop unnecessary error check for debugfs_create_dir()

[Sasha Levin]

From: Jinjie Ruan <ruanjinjie@huawei.com>

[ Upstream commit 50180c7f8e3de7c2d87f619131776598fcb1478d ]

debugfs_create_dir() returns ERR_PTR and never return NULL.

As Russell suggested, this patch removes the error checking for
debugfs_create_dir(). This is because the DebugFS kernel API is developed
in a way that the caller can safely ignore the errors that occur during
the creation of DebugFS nodes. The debugfs APIs have a IS_ERR() judge in
start_creating() which can handle it gracefully. So these checks are
unnecessary.

Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20230903030216.1509013-3-ruanjinjie@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/debugfs.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/debugfs.c b/drivers/net/wireless/marvell/mwifiex/debugfs.c
index 1e7dc724c6a94..d48a3e0b36060 100644
--- a/drivers/net/wireless/marvell/mwifiex/debugfs.c
+++ b/drivers/net/wireless/marvell/mwifiex/debugfs.c
@@ -976,9 +976,6 @@ mwifiex_dev_debugfs_init(struct mwifiex_private *priv)
 	priv->dfs_dev_dir = debugfs_create_dir(priv->netdev->name,
 					       mwifiex_dfs_dir);
 
-	if (!priv->dfs_dev_dir)
-		return;
-
 	MWIFIEX_DFS_ADD_FILE(info);
 	MWIFIEX_DFS_ADD_FILE(debug);
 	MWIFIEX_DFS_ADD_FILE(getlog);
-- 
2.43.0

[PATCH 5.10 049/238] ARM: dts: renesas: r8a73a4: Fix external clocks and clock rate

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 090c4094574705b0afc7d37825cdc5d06f0e7e02 ]

External clocks should be defined as zero-Hz clocks in the SoC .dtsi,
and overridden in the board .dts when present.

Correct the clock rate of extal1 from 25 to 26 MHz, to match the crystal
oscillator present on the APE6-EVM board.

Fixes: a76809a329d6ebae ("ARM: shmobile: r8a73a4: Common clock framework DT description")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/1692bc8cd465d62168cbf110522ad62a7af3f606.1705315614.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/r8a73a4-ape6evm.dts | 12 ++++++++++++
 arch/arm/boot/dts/r8a73a4.dtsi        |  9 ++++++---
 2 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index b088e8e351d54..1028f721b38b0 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -208,6 +208,18 @@ &cmt1 {
 	status = "okay";
 };
 
+&extal1_clk {
+	clock-frequency = <26000000>;
+};
+
+&extal2_clk {
+	clock-frequency = <48000000>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
 &pfc {
 	scifa0_pins: scifa0 {
 		groups = "scifa0_data";
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index e5fb1ce261f72..bcde8d1005976 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -494,17 +494,20 @@ clocks {
 		extalr_clk: extalr {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		extal1_clk: extal1 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <25000000>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		extal2_clk: extal2 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <48000000>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		fsiack_clk: fsiack {
 			compatible = "fixed-clock";
-- 
2.43.0

[PATCH 5.10 050/238] cpufreq: brcmstb-avs-cpufreq: add check for cpufreq_cpu_get's return value

[Sasha Levin]

From: Anastasia Belova <abelova@astralinux.ru>

[ Upstream commit f661017e6d326ee187db24194cabb013d81bc2a6 ]

cpufreq_cpu_get may return NULL. To avoid NULL-dereference check it
and return 0 in case of error.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: de322e085995 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/brcmstb-avs-cpufreq.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/cpufreq/brcmstb-avs-cpufreq.c b/drivers/cpufreq/brcmstb-avs-cpufreq.c
index f644c5e325fb2..38ec0fedb247f 100644
--- a/drivers/cpufreq/brcmstb-avs-cpufreq.c
+++ b/drivers/cpufreq/brcmstb-avs-cpufreq.c
@@ -481,6 +481,8 @@ static bool brcm_avs_is_firmware_loaded(struct private_data *priv)
 static unsigned int brcm_avs_cpufreq_get(unsigned int cpu)
 {
 	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+	if (!policy)
+		return 0;
 	struct private_data *priv = policy->driver_data;
 
 	cpufreq_cpu_put(policy);
-- 
2.43.0

[PATCH 5.10 051/238] sock_diag: annotate data-races around sock_diag_handlers[family]

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit efd402537673f9951992aea4ef0f5ff51d858f4b ]

__sock_diag_cmd() and sock_diag_bind() read sock_diag_handlers[family]
without a lock held.

Use READ_ONCE()/WRITE_ONCE() annotations to avoid potential issues.

Fixes: 8ef874bfc729 ("sock_diag: Move the sock_ code to net/core/")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/sock_diag.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/net/core/sock_diag.c b/net/core/sock_diag.c
index c9c45b935f990..bce65b519ee80 100644
--- a/net/core/sock_diag.c
+++ b/net/core/sock_diag.c
@@ -189,7 +189,7 @@ int sock_diag_register(const struct sock_diag_handler *hndl)
 	if (sock_diag_handlers[hndl->family])
 		err = -EBUSY;
 	else
-		sock_diag_handlers[hndl->family] = hndl;
+		WRITE_ONCE(sock_diag_handlers[hndl->family], hndl);
 	mutex_unlock(&sock_diag_table_mutex);
 
 	return err;
@@ -205,7 +205,7 @@ void sock_diag_unregister(const struct sock_diag_handler *hnld)
 
 	mutex_lock(&sock_diag_table_mutex);
 	BUG_ON(sock_diag_handlers[family] != hnld);
-	sock_diag_handlers[family] = NULL;
+	WRITE_ONCE(sock_diag_handlers[family], NULL);
 	mutex_unlock(&sock_diag_table_mutex);
 }
 EXPORT_SYMBOL_GPL(sock_diag_unregister);
@@ -223,7 +223,7 @@ static int __sock_diag_cmd(struct sk_buff *skb, struct nlmsghdr *nlh)
 		return -EINVAL;
 	req->sdiag_family = array_index_nospec(req->sdiag_family, AF_MAX);
 
-	if (sock_diag_handlers[req->sdiag_family] == NULL)
+	if (READ_ONCE(sock_diag_handlers[req->sdiag_family]) == NULL)
 		sock_load_diag_module(req->sdiag_family, 0);
 
 	mutex_lock(&sock_diag_table_mutex);
@@ -282,12 +282,12 @@ static int sock_diag_bind(struct net *net, int group)
 	switch (group) {
 	case SKNLGRP_INET_TCP_DESTROY:
 	case SKNLGRP_INET_UDP_DESTROY:
-		if (!sock_diag_handlers[AF_INET])
+		if (!READ_ONCE(sock_diag_handlers[AF_INET]))
 			sock_load_diag_module(AF_INET, 0);
 		break;
 	case SKNLGRP_INET6_TCP_DESTROY:
 	case SKNLGRP_INET6_UDP_DESTROY:
-		if (!sock_diag_handlers[AF_INET6])
+		if (!READ_ONCE(sock_diag_handlers[AF_INET6]))
 			sock_load_diag_module(AF_INET6, 0);
 		break;
 	}
-- 
2.43.0

[PATCH 5.10 052/238] inet_diag: annotate data-races around inet_diag_table[]

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit e50e10ae5d81ddb41547114bfdc5edc04422f082 ]

inet_diag_lock_handler() reads inet_diag_table[proto] locklessly.

Use READ_ONCE()/WRITE_ONCE() annotations to avoid potential issues.

Fixes: d523a328fb02 ("[INET]: Fix inet_diag dead-lock regression")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/inet_diag.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index fa9f1de58df46..27a5a7d66d184 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -57,7 +57,7 @@ static const struct inet_diag_handler *inet_diag_lock_handler(int proto)
 		return ERR_PTR(-ENOENT);
 	}
 
-	if (!inet_diag_table[proto])
+	if (!READ_ONCE(inet_diag_table[proto]))
 		sock_load_diag_module(AF_INET, proto);
 
 	mutex_lock(&inet_diag_table_mutex);
@@ -1413,7 +1413,7 @@ int inet_diag_register(const struct inet_diag_handler *h)
 	mutex_lock(&inet_diag_table_mutex);
 	err = -EEXIST;
 	if (!inet_diag_table[type]) {
-		inet_diag_table[type] = h;
+		WRITE_ONCE(inet_diag_table[type], h);
 		err = 0;
 	}
 	mutex_unlock(&inet_diag_table_mutex);
@@ -1430,7 +1430,7 @@ void inet_diag_unregister(const struct inet_diag_handler *h)
 		return;
 
 	mutex_lock(&inet_diag_table_mutex);
-	inet_diag_table[type] = NULL;
+	WRITE_ONCE(inet_diag_table[type], NULL);
 	mutex_unlock(&inet_diag_table_mutex);
 }
 EXPORT_SYMBOL_GPL(inet_diag_unregister);
-- 
2.43.0

[PATCH 5.10 053/238] bpftool: Silence build warning about calloc()

[Sasha Levin]

From: Tiezhu Yang <yangtiezhu@loongson.cn>

[ Upstream commit f5f30386c78105cba520e443a6a9ee945ec1d066 ]

There exists the following warning when building bpftool:

  CC      prog.o
prog.c: In function ‘profile_open_perf_events’:
prog.c:2301:24: warning: ‘calloc’ sizes specified with ‘sizeof’ in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
 2301 |                 sizeof(int), obj->rodata->num_cpu * obj->rodata->num_metric);
      |                        ^~~
prog.c:2301:24: note: earlier argument should specify number of elements, later size of each element

Tested with the latest upstream GCC which contains a new warning option
-Wcalloc-transposed-args. The first argument to calloc is documented to
be number of elements in array, while the second argument is size of each
element, just switch the first and second arguments of calloc() to silence
the build warning, compile tested only.

Fixes: 47c09d6a9f67 ("bpftool: Introduce "prog profile" command")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20240116061920.31172-1-yangtiezhu@loongson.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/bpf/bpftool/prog.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c
index d2bcce627b320..d07996e7952f3 100644
--- a/tools/bpf/bpftool/prog.c
+++ b/tools/bpf/bpftool/prog.c
@@ -1946,7 +1946,7 @@ static int profile_open_perf_events(struct profiler_bpf *obj)
 	int map_fd;
 
 	profile_perf_events = calloc(
-		sizeof(int), obj->rodata->num_cpu * obj->rodata->num_metric);
+		obj->rodata->num_cpu * obj->rodata->num_metric, sizeof(int));
 	if (!profile_perf_events) {
 		p_err("failed to allocate memory for perf_event array: %s",
 		      strerror(errno));
-- 
2.43.0

[PATCH 5.10 054/238] af_unix: Annotate data-race of gc_in_progress in wait_for_unix_gc().

[Sasha Levin]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 31e03207119a535d0b0e3b3a7f91983aeb2cb14d ]

gc_in_progress is changed under spin_lock(&unix_gc_lock),
but wait_for_unix_gc() reads it locklessly.

Let's use READ_ONCE().

Fixes: 5f23b734963e ("net: Fix soft lockups/OOM issues w/ unix garbage collector")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240123170856.41348-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/unix/garbage.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/unix/garbage.c b/net/unix/garbage.c
index dc27635403932..9121a4d5436d5 100644
--- a/net/unix/garbage.c
+++ b/net/unix/garbage.c
@@ -198,7 +198,7 @@ void wait_for_unix_gc(void)
 	if (READ_ONCE(unix_tot_inflight) > UNIX_INFLIGHT_TRIGGER_GC &&
 	    !READ_ONCE(gc_in_progress))
 		unix_gc();
-	wait_event(unix_gc_wait, gc_in_progress == false);
+	wait_event(unix_gc_wait, !READ_ONCE(gc_in_progress));
 }
 
 /* The external entry point: unix_gc() */
-- 
2.43.0

[PATCH 5.10 055/238] wifi: ath9k: delay all of ath9k_wmi_event_tasklet() until init is complete

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 24355fcb0d4cbcb6ddda262596558e8cfba70f11 ]

The ath9k_wmi_event_tasklet() used in ath9k_htc assumes that all the data
structures have been fully initialised by the time it runs. However, because of
the order in which things are initialised, this is not guaranteed to be the
case, because the device is exposed to the USB subsystem before the ath9k driver
initialisation is completed.

We already committed a partial fix for this in commit:
8b3046abc99e ("ath9k_htc: fix NULL pointer dereference at ath9k_htc_tx_get_packet()")

However, that commit only aborted the WMI_TXSTATUS_EVENTID command in the event
tasklet, pairing it with an "initialisation complete" bit in the TX struct. It
seems syzbot managed to trigger the race for one of the other commands as well,
so let's just move the existing synchronisation bit to cover the whole
tasklet (setting it at the end of ath9k_htc_probe_device() instead of inside
ath9k_tx_init()).

Link: https://lore.kernel.org/r/ed1d2c66-1193-4c81-9542-d514c29ba8b8.bugreport@ubisectech.com
Fixes: 8b3046abc99e ("ath9k_htc: fix NULL pointer dereference at ath9k_htc_tx_get_packet()")
Reported-by: Ubisectech Sirius <bugreport@ubisectech.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240126140218.1033443-1-toke@toke.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/htc.h          |  2 +-
 drivers/net/wireless/ath/ath9k/htc_drv_init.c |  4 ++++
 drivers/net/wireless/ath/ath9k/htc_drv_txrx.c |  4 ----
 drivers/net/wireless/ath/ath9k/wmi.c          | 10 ++++++----
 4 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index 237f4ec2cffd7..6c33e898b3000 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -306,7 +306,6 @@ struct ath9k_htc_tx {
 	DECLARE_BITMAP(tx_slot, MAX_TX_BUF_NUM);
 	struct timer_list cleanup_timer;
 	spinlock_t tx_lock;
-	bool initialized;
 };
 
 struct ath9k_htc_tx_ctl {
@@ -515,6 +514,7 @@ struct ath9k_htc_priv {
 	unsigned long ps_usecount;
 	bool ps_enabled;
 	bool ps_idle;
+	bool initialized;
 
 #ifdef CONFIG_MAC80211_LEDS
 	enum led_brightness brightness;
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 96a3185a96d75..b014185373f34 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -966,6 +966,10 @@ int ath9k_htc_probe_device(struct htc_target *htc_handle, struct device *dev,
 
 	htc_handle->drv_priv = priv;
 
+	/* Allow ath9k_wmi_event_tasklet() to operate. */
+	smp_wmb();
+	priv->initialized = true;
+
 	return 0;
 
 err_init:
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
index 5037142c5a822..95146ec754d5c 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
@@ -810,10 +810,6 @@ int ath9k_tx_init(struct ath9k_htc_priv *priv)
 	skb_queue_head_init(&priv->tx.data_vo_queue);
 	skb_queue_head_init(&priv->tx.tx_failed);
 
-	/* Allow ath9k_wmi_event_tasklet(WMI_TXSTATUS_EVENTID) to operate. */
-	smp_wmb();
-	priv->tx.initialized = true;
-
 	return 0;
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/wmi.c b/drivers/net/wireless/ath/ath9k/wmi.c
index 1476b42b52a91..805ad31edba2b 100644
--- a/drivers/net/wireless/ath/ath9k/wmi.c
+++ b/drivers/net/wireless/ath/ath9k/wmi.c
@@ -155,6 +155,12 @@ void ath9k_wmi_event_tasklet(struct tasklet_struct *t)
 		}
 		spin_unlock_irqrestore(&wmi->wmi_lock, flags);
 
+		/* Check if ath9k_htc_probe_device() completed. */
+		if (!data_race(priv->initialized)) {
+			kfree_skb(skb);
+			continue;
+		}
+
 		hdr = (struct wmi_cmd_hdr *) skb->data;
 		cmd_id = be16_to_cpu(hdr->command_id);
 		wmi_event = skb_pull(skb, sizeof(struct wmi_cmd_hdr));
@@ -169,10 +175,6 @@ void ath9k_wmi_event_tasklet(struct tasklet_struct *t)
 					     &wmi->drv_priv->fatal_work);
 			break;
 		case WMI_TXSTATUS_EVENTID:
-			/* Check if ath9k_tx_init() completed. */
-			if (!data_race(priv->tx.initialized))
-				break;
-
 			spin_lock_bh(&priv->tx.tx_lock);
 			if (priv->tx.flags & ATH9K_HTC_OP_TX_DRAIN) {
 				spin_unlock_bh(&priv->tx.tx_lock);
-- 
2.43.0

[PATCH 5.10 056/238] wifi: iwlwifi: dbg-tlv: ensure NUL termination

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit ea1d166fae14e05d49ffb0ea9fcd4658f8d3dcea ]

The iwl_fw_ini_debug_info_tlv is used as a string, so we must
ensure the string is terminated correctly before using it.

Fixes: a9248de42464 ("iwlwifi: dbg_ini: add TLV allocation new API support")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.be15e858ee89.Ibff93429cf999eafc7b26f3eef4c055dc84984a0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c b/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c
index bcaec8a184cd6..299819d2d1904 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c
@@ -155,6 +155,12 @@ static int iwl_dbg_tlv_alloc_debug_info(struct iwl_trans *trans,
 	if (le32_to_cpu(tlv->length) != sizeof(*debug_info))
 		return -EINVAL;
 
+	/* we use this as a string, ensure input was NUL terminated */
+	if (strnlen(debug_info->debug_cfg_name,
+		    sizeof(debug_info->debug_cfg_name)) ==
+			sizeof(debug_info->debug_cfg_name))
+		return -EINVAL;
+
 	IWL_DEBUG_FW(trans, "WRT: Loading debug cfg: %s\n",
 		     debug_info->debug_cfg_name);
 
-- 
2.43.0

[PATCH 5.10 057/238] wifi: iwlwifi: fix EWRD table validity check

[Sasha Levin]

From: Miri Korenblit <miriam.rachel.korenblit@intel.com>

[ Upstream commit c8d8f3911135921ace8e939ea0956b55f74bf8a0 ]

EWRD ACPI table contains up to 3 additional sar profiles.
According to the BIOS spec, the table contains a n_profile
variable indicating how many additional profiles exist in the
table.
Currently we check that n_profiles is not <= 0.
But according to the BIOS spec, 0 is a valid value,
and it can't be < 0 anyway because we receive that from ACPI as
an unsigned integer.

Fixes: 39c1a9728f93 ("iwlwifi: refactor the SAR tables from mvm to acpi")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240129211905.448ea2f40814.Iffd2aadf8e8693e6cb599bee0406a800a0c1e081@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/fw/acpi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/acpi.c b/drivers/net/wireless/intel/iwlwifi/fw/acpi.c
index 5e4faf9ce4bbe..fc35f8f84376c 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/acpi.c
+++ b/drivers/net/wireless/intel/iwlwifi/fw/acpi.c
@@ -555,7 +555,7 @@ int iwl_sar_get_ewrd_table(struct iwl_fw_runtime *fwrt)
 	 * from index 1, so the maximum value allowed here is
 	 * ACPI_SAR_PROFILES_NUM - 1.
 	 */
-	if (n_profiles <= 0 || n_profiles >= ACPI_SAR_PROFILE_NUM) {
+	if (n_profiles >= ACPI_SAR_PROFILE_NUM) {
 		ret = -EINVAL;
 		goto out_free;
 	}
-- 
2.43.0

[PATCH 5.10 058/238] net: blackhole_dev: fix build warning for ethh set but not used

[Sasha Levin]

From: Breno Leitao <leitao@debian.org>

[ Upstream commit 843a8851e89e2e85db04caaf88d8554818319047 ]

lib/test_blackhole_dev.c sets a variable that is never read, causing
this following building warning:

	lib/test_blackhole_dev.c:32:17: warning: variable 'ethh' set but not used [-Wunused-but-set-variable]

Remove the variable struct ethhdr *ethh, which is unused.

Fixes: 509e56b37cc3 ("blackhole_dev: add a selftest")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/test_blackhole_dev.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/lib/test_blackhole_dev.c b/lib/test_blackhole_dev.c
index 4c40580a99a36..f247089d63c08 100644
--- a/lib/test_blackhole_dev.c
+++ b/lib/test_blackhole_dev.c
@@ -29,7 +29,6 @@ static int __init test_blackholedev_init(void)
 {
 	struct ipv6hdr *ip6h;
 	struct sk_buff *skb;
-	struct ethhdr *ethh;
 	struct udphdr *uh;
 	int data_len;
 	int ret;
@@ -61,7 +60,7 @@ static int __init test_blackholedev_init(void)
 	ip6h->saddr = in6addr_loopback;
 	ip6h->daddr = in6addr_loopback;
 	/* Ether */
-	ethh = (struct ethhdr *)skb_push(skb, sizeof(struct ethhdr));
+	skb_push(skb, sizeof(struct ethhdr));
 	skb_set_mac_header(skb, 0);
 
 	skb->protocol = htons(ETH_P_IPV6);
-- 
2.43.0

[PATCH 5.10 059/238] wifi: libertas: fix some memleaks in lbs_allocate_cmd_buffer()

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit 5f0e4aede01cb01fa633171f0533affd25328c3a ]

In the for statement of lbs_allocate_cmd_buffer(), if the allocation of
cmdarray[i].cmdbuf fails, both cmdarray and cmdarray[i].cmdbuf needs to
be freed. Otherwise, there will be memleaks in lbs_allocate_cmd_buffer().

Fixes: 876c9d3aeb98 ("[PATCH] Marvell Libertas 8388 802.11b/g USB driver")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240126075336.2825608-1-alexious@zju.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/libertas/cmd.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/marvell/libertas/cmd.c b/drivers/net/wireless/marvell/libertas/cmd.c
index a4d9dd73b2588..db9a852fa58a3 100644
--- a/drivers/net/wireless/marvell/libertas/cmd.c
+++ b/drivers/net/wireless/marvell/libertas/cmd.c
@@ -1133,7 +1133,7 @@ int lbs_allocate_cmd_buffer(struct lbs_private *priv)
 		if (!cmdarray[i].cmdbuf) {
 			lbs_deb_host("ALLOC_CMD_BUF: ptempvirtualaddr is NULL\n");
 			ret = -1;
-			goto done;
+			goto free_cmd_array;
 		}
 	}
 
@@ -1141,8 +1141,17 @@ int lbs_allocate_cmd_buffer(struct lbs_private *priv)
 		init_waitqueue_head(&cmdarray[i].cmdwait_q);
 		lbs_cleanup_and_insert_cmd(priv, &cmdarray[i]);
 	}
-	ret = 0;
+	return 0;
 
+free_cmd_array:
+	for (i = 0; i < LBS_NUM_CMD_BUFFERS; i++) {
+		if (cmdarray[i].cmdbuf) {
+			kfree(cmdarray[i].cmdbuf);
+			cmdarray[i].cmdbuf = NULL;
+		}
+	}
+	kfree(priv->cmd_array);
+	priv->cmd_array = NULL;
 done:
 	return ret;
 }
-- 
2.43.0

[PATCH 5.10 060/238] printk: Add panic_in_progress helper

[Sasha Levin]

From: Stephen Brennan <stephen.s.brennan@oracle.com>

[ Upstream commit 77498617857f68496b360081dde1a492d40c28b2 ]

This will be used help avoid deadlocks during panics. Although it would
be better to include this in linux/panic.h, it would require that header
to include linux/atomic.h as well. On some architectures, this results
in a circular dependency as well. So instead add the helper directly to
printk.c.

Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220202171821.179394-2-stephen.s.brennan@oracle.com
Stable-dep-of: d04d5882cd67 ("printk: Disable passing console lock owner completely during panic()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/printk/printk.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 17a310dcb6d96..94af80b7fa9b5 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -258,6 +258,11 @@ static void __up_console_sem(unsigned long ip)
 }
 #define up_console_sem() __up_console_sem(_RET_IP_)
 
+static bool panic_in_progress(void)
+{
+	return unlikely(atomic_read(&panic_cpu) != PANIC_CPU_INVALID);
+}
+
 /*
  * This is used for debugging the mess that is the VT code by
  * keeping track if we have the console semaphore held. It's
-- 
2.43.0

[PATCH 5.10 061/238] printk: Disable passing console lock owner completely during panic()

[Sasha Levin]

From: Petr Mladek <pmladek@suse.com>

[ Upstream commit d04d5882cd678b898a9d7c5aee6afbe9e6e77fcd ]

The commit d51507098ff91 ("printk: disable optimistic spin
during panic") added checks to avoid becoming a console waiter
if a panic is in progress.

However, the transition to panic can occur while there is
already a waiter. The current owner should not pass the lock to
the waiter because it might get stopped or blocked anytime.

Also the panic context might pass the console lock owner to an
already stopped waiter by mistake. It might happen when
console_flush_on_panic() ignores the current lock owner, for
example:

CPU0                                CPU1
----                                ----
console_lock_spinning_enable()
                                    console_trylock_spinning()
                                      [CPU1 now console waiter]
NMI: panic()
  panic_other_cpus_shutdown()
                                    [stopped as console waiter]
  console_flush_on_panic()
    console_lock_spinning_enable()
    [print 1 record]
    console_lock_spinning_disable_and_check()
      [handover to stopped CPU1]

This results in panic() not flushing the panic messages.

Fix these problems by disabling all spinning operations
completely during panic().

Another advantage is that it prevents possible deadlocks caused
by "console_owner_lock". The panic() context does not need to
take it any longer. The lockless checks are safe because the
functions become NOPs when they see the panic in progress. All
operations manipulating the state are still synchronized by the
lock even when non-panic CPUs would notice the panic
synchronously.

The current owner might stay spinning. But non-panic() CPUs
would get stopped anyway and the panic context will never start
spinning.

Fixes: dbdda842fe96 ("printk: Add console owner and waiter logic to load balance console writes")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20240207134103.1357162-12-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/printk/printk.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 94af80b7fa9b5..d109411f108f9 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -1760,10 +1760,23 @@ static bool console_waiter;
  */
 static void console_lock_spinning_enable(void)
 {
+	/*
+	 * Do not use spinning in panic(). The panic CPU wants to keep the lock.
+	 * Non-panic CPUs abandon the flush anyway.
+	 *
+	 * Just keep the lockdep annotation. The panic-CPU should avoid
+	 * taking console_owner_lock because it might cause a deadlock.
+	 * This looks like the easiest way how to prevent false lockdep
+	 * reports without handling races a lockless way.
+	 */
+	if (panic_in_progress())
+		goto lockdep;
+
 	raw_spin_lock(&console_owner_lock);
 	console_owner = current;
 	raw_spin_unlock(&console_owner_lock);
 
+lockdep:
 	/* The waiter may spin on us after setting console_owner */
 	spin_acquire(&console_owner_dep_map, 0, 0, _THIS_IP_);
 }
@@ -1787,6 +1800,22 @@ static int console_lock_spinning_disable_and_check(void)
 {
 	int waiter;
 
+	/*
+	 * Ignore spinning waiters during panic() because they might get stopped
+	 * or blocked at any time,
+	 *
+	 * It is safe because nobody is allowed to start spinning during panic
+	 * in the first place. If there has been a waiter then non panic CPUs
+	 * might stay spinning. They would get stopped anyway. The panic context
+	 * will never start spinning and an interrupted spin on panic CPU will
+	 * never continue.
+	 */
+	if (panic_in_progress()) {
+		/* Keep lockdep happy. */
+		spin_release(&console_owner_dep_map, _THIS_IP_);
+		return 0;
+	}
+
 	raw_spin_lock(&console_owner_lock);
 	waiter = READ_ONCE(console_waiter);
 	console_owner = NULL;
-- 
2.43.0

[PATCH 5.10 062/238] arm64: dts: mediatek: mt7622: add missing "device_type" to memory nodes

[Sasha Levin]

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit 99d100e00144bc01b49a697f4bc4398f2f7e7ce4 ]

This fixes:
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dtb: /: memory@40000000: 'device_type' is a required property
        from schema $id: http://devicetree.org/schemas/memory.yaml#
arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dtb: /: memory@40000000: 'device_type' is a required property
        from schema $id: http://devicetree.org/schemas/memory.yaml#

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240122132357.31264-1-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 1 +
 arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts             | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index 7e6cffdc5a551..778174a7d649b 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -71,6 +71,7 @@ red {
 
 	memory@40000000 {
 		reg = <0 0x40000000 0 0x40000000>;
+		device_type = "memory";
 	};
 
 	reg_1p8v: regulator-1p8v {
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 993f033d0bf04..810575de66702 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -57,6 +57,7 @@ wps {
 
 	memory@40000000 {
 		reg = <0 0x40000000 0 0x20000000>;
+		device_type = "memory";
 	};
 
 	reg_1p8v: regulator-1p8v {
-- 
2.43.0

[PATCH 5.10 063/238] bpf: Factor out bpf_spin_lock into helpers.

[Sasha Levin]

From: Alexei Starovoitov <ast@kernel.org>

[ Upstream commit c1b3fed319d32a721d4b9c17afaeb430444ff773 ]

Move ____bpf_spin_lock/unlock into helpers to make it more clear
that quadruple underscore bpf_spin_lock/unlock are irqsave/restore variants.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210715005417.78572-3-alexei.starovoitov@gmail.com
Stable-dep-of: 178c54666f9c ("bpf: Mark bpf_spin_{lock,unlock}() helpers with notrace correctly")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/helpers.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c
index 0efe7c7bfe5e9..d758641973d6d 100644
--- a/kernel/bpf/helpers.c
+++ b/kernel/bpf/helpers.c
@@ -278,13 +278,18 @@ static inline void __bpf_spin_unlock(struct bpf_spin_lock *lock)
 
 static DEFINE_PER_CPU(unsigned long, irqsave_flags);
 
-notrace BPF_CALL_1(bpf_spin_lock, struct bpf_spin_lock *, lock)
+static inline void __bpf_spin_lock_irqsave(struct bpf_spin_lock *lock)
 {
 	unsigned long flags;
 
 	local_irq_save(flags);
 	__bpf_spin_lock(lock);
 	__this_cpu_write(irqsave_flags, flags);
+}
+
+notrace BPF_CALL_1(bpf_spin_lock, struct bpf_spin_lock *, lock)
+{
+	__bpf_spin_lock_irqsave(lock);
 	return 0;
 }
 
@@ -295,13 +300,18 @@ const struct bpf_func_proto bpf_spin_lock_proto = {
 	.arg1_type	= ARG_PTR_TO_SPIN_LOCK,
 };
 
-notrace BPF_CALL_1(bpf_spin_unlock, struct bpf_spin_lock *, lock)
+static inline void __bpf_spin_unlock_irqrestore(struct bpf_spin_lock *lock)
 {
 	unsigned long flags;
 
 	flags = __this_cpu_read(irqsave_flags);
 	__bpf_spin_unlock(lock);
 	local_irq_restore(flags);
+}
+
+notrace BPF_CALL_1(bpf_spin_unlock, struct bpf_spin_lock *, lock)
+{
+	__bpf_spin_unlock_irqrestore(lock);
 	return 0;
 }
 
@@ -322,9 +332,9 @@ void copy_map_value_locked(struct bpf_map *map, void *dst, void *src,
 	else
 		lock = dst + map->spin_lock_off;
 	preempt_disable();
-	____bpf_spin_lock(lock);
+	__bpf_spin_lock_irqsave(lock);
 	copy_map_value(map, dst, src);
-	____bpf_spin_unlock(lock);
+	__bpf_spin_unlock_irqrestore(lock);
 	preempt_enable();
 }
 
-- 
2.43.0

[PATCH 5.10 064/238] bpf: Mark bpf_spin_{lock,unlock}() helpers with notrace correctly

[Sasha Levin]

From: Yonghong Song <yonghong.song@linux.dev>

[ Upstream commit 178c54666f9c4d2f49f2ea661d0c11b52f0ed190 ]

Currently tracing is supposed not to allow for bpf_spin_{lock,unlock}()
helper calls. This is to prevent deadlock for the following cases:
  - there is a prog (prog-A) calling bpf_spin_{lock,unlock}().
  - there is a tracing program (prog-B), e.g., fentry, attached
    to bpf_spin_lock() and/or bpf_spin_unlock().
  - prog-B calls bpf_spin_{lock,unlock}().
For such a case, when prog-A calls bpf_spin_{lock,unlock}(),
a deadlock will happen.

The related source codes are below in kernel/bpf/helpers.c:
  notrace BPF_CALL_1(bpf_spin_lock, struct bpf_spin_lock *, lock)
  notrace BPF_CALL_1(bpf_spin_unlock, struct bpf_spin_lock *, lock)
notrace is supposed to prevent fentry prog from attaching to
bpf_spin_{lock,unlock}().

But actually this is not the case and fentry prog can successfully
attached to bpf_spin_lock(). Siddharth Chintamaneni reported
the issue in [1]. The following is the macro definition for
above BPF_CALL_1:
  #define BPF_CALL_x(x, name, ...)                                               \
        static __always_inline                                                 \
        u64 ____##name(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__));   \
        typedef u64 (*btf_##name)(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__)); \
        u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__));         \
        u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__))          \
        {                                                                      \
                return ((btf_##name)____##name)(__BPF_MAP(x,__BPF_CAST,__BPF_N,__VA_ARGS__));\
        }                                                                      \
        static __always_inline                                                 \
        u64 ____##name(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__))

  #define BPF_CALL_1(name, ...)   BPF_CALL_x(1, name, __VA_ARGS__)

The notrace attribute is actually applied to the static always_inline function
____bpf_spin_{lock,unlock}(). The actual callback function
bpf_spin_{lock,unlock}() is not marked with notrace, hence
allowing fentry prog to attach to two helpers, and this
may cause the above mentioned deadlock. Siddharth Chintamaneni
actually has a reproducer in [2].

To fix the issue, a new macro NOTRACE_BPF_CALL_1 is introduced which
will add notrace attribute to the original function instead of
the hidden always_inline function and this fixed the problem.

  [1] https://lore.kernel.org/bpf/CAE5sdEigPnoGrzN8WU7Tx-h-iFuMZgW06qp0KHWtpvoXxf1OAQ@mail.gmail.com/
  [2] https://lore.kernel.org/bpf/CAE5sdEg6yUc_Jz50AnUXEEUh6O73yQ1Z6NV2srJnef0ZrQkZew@mail.gmail.com/

Fixes: d83525ca62cf ("bpf: introduce bpf_spin_lock")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240207070102.335167-1-yonghong.song@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/filter.h | 21 ++++++++++++---------
 kernel/bpf/helpers.c   |  4 ++--
 2 files changed, 14 insertions(+), 11 deletions(-)

diff --git a/include/linux/filter.h b/include/linux/filter.h
index cd56e53bd42e2..840b2a05c1b9f 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -480,24 +480,27 @@ static inline bool insn_is_zext(const struct bpf_insn *insn)
 	__BPF_MAP(n, __BPF_DECL_ARGS, __BPF_N, u64, __ur_1, u64, __ur_2,       \
 		  u64, __ur_3, u64, __ur_4, u64, __ur_5)
 
-#define BPF_CALL_x(x, name, ...)					       \
+#define BPF_CALL_x(x, attr, name, ...)					       \
 	static __always_inline						       \
 	u64 ____##name(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__));   \
 	typedef u64 (*btf_##name)(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__)); \
-	u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__));	       \
-	u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__))	       \
+	attr u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__));    \
+	attr u64 name(__BPF_REG(x, __BPF_DECL_REGS, __BPF_N, __VA_ARGS__))     \
 	{								       \
 		return ((btf_##name)____##name)(__BPF_MAP(x,__BPF_CAST,__BPF_N,__VA_ARGS__));\
 	}								       \
 	static __always_inline						       \
 	u64 ____##name(__BPF_MAP(x, __BPF_DECL_ARGS, __BPF_V, __VA_ARGS__))
 
-#define BPF_CALL_0(name, ...)	BPF_CALL_x(0, name, __VA_ARGS__)
-#define BPF_CALL_1(name, ...)	BPF_CALL_x(1, name, __VA_ARGS__)
-#define BPF_CALL_2(name, ...)	BPF_CALL_x(2, name, __VA_ARGS__)
-#define BPF_CALL_3(name, ...)	BPF_CALL_x(3, name, __VA_ARGS__)
-#define BPF_CALL_4(name, ...)	BPF_CALL_x(4, name, __VA_ARGS__)
-#define BPF_CALL_5(name, ...)	BPF_CALL_x(5, name, __VA_ARGS__)
+#define __NOATTR
+#define BPF_CALL_0(name, ...)	BPF_CALL_x(0, __NOATTR, name, __VA_ARGS__)
+#define BPF_CALL_1(name, ...)	BPF_CALL_x(1, __NOATTR, name, __VA_ARGS__)
+#define BPF_CALL_2(name, ...)	BPF_CALL_x(2, __NOATTR, name, __VA_ARGS__)
+#define BPF_CALL_3(name, ...)	BPF_CALL_x(3, __NOATTR, name, __VA_ARGS__)
+#define BPF_CALL_4(name, ...)	BPF_CALL_x(4, __NOATTR, name, __VA_ARGS__)
+#define BPF_CALL_5(name, ...)	BPF_CALL_x(5, __NOATTR, name, __VA_ARGS__)
+
+#define NOTRACE_BPF_CALL_1(name, ...)	BPF_CALL_x(1, notrace, name, __VA_ARGS__)
 
 #define bpf_ctx_range(TYPE, MEMBER)						\
 	offsetof(TYPE, MEMBER) ... offsetofend(TYPE, MEMBER) - 1
diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c
index d758641973d6d..084ac7e429199 100644
--- a/kernel/bpf/helpers.c
+++ b/kernel/bpf/helpers.c
@@ -287,7 +287,7 @@ static inline void __bpf_spin_lock_irqsave(struct bpf_spin_lock *lock)
 	__this_cpu_write(irqsave_flags, flags);
 }
 
-notrace BPF_CALL_1(bpf_spin_lock, struct bpf_spin_lock *, lock)
+NOTRACE_BPF_CALL_1(bpf_spin_lock, struct bpf_spin_lock *, lock)
 {
 	__bpf_spin_lock_irqsave(lock);
 	return 0;
@@ -309,7 +309,7 @@ static inline void __bpf_spin_unlock_irqrestore(struct bpf_spin_lock *lock)
 	local_irq_restore(flags);
 }
 
-notrace BPF_CALL_1(bpf_spin_unlock, struct bpf_spin_lock *, lock)
+NOTRACE_BPF_CALL_1(bpf_spin_unlock, struct bpf_spin_lock *, lock)
 {
 	__bpf_spin_unlock_irqrestore(lock);
 	return 0;
-- 
2.43.0

[PATCH 5.10 065/238] wireless: Remove redundant 'flush_workqueue()' calls

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit ff1cc2fa3055ee4c83839f38b74b4ee370a2291c ]

'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.

Remove the redundant 'flush_workqueue()' calls.

This was generated with coccinelle:

@@
expression E;
@@
- 	flush_workqueue(E);
	destroy_workqueue(E);

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/0855d51423578ad019c0264dad3fe47a2e8af9c7.1633849511.git.christophe.jaillet@wanadoo.fr
Stable-dep-of: cb5942b77c05 ("wifi: wilc1000: prevent use-after-free on vif when cleaning up all interfaces")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/core.c             | 3 ---
 drivers/net/wireless/ath/ath10k/sdio.c             | 1 -
 drivers/net/wireless/intel/iwlegacy/3945-mac.c     | 1 -
 drivers/net/wireless/intel/iwlegacy/4965-mac.c     | 1 -
 drivers/net/wireless/intel/iwlwifi/dvm/main.c      | 1 -
 drivers/net/wireless/marvell/mwifiex/cfg80211.c    | 2 --
 drivers/net/wireless/marvell/mwifiex/main.c        | 2 --
 drivers/net/wireless/microchip/wilc1000/netdev.c   | 1 -
 drivers/net/wireless/quantenna/qtnfmac/core.c      | 2 --
 drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c | 2 --
 drivers/net/wireless/realtek/rtlwifi/pci.c         | 1 -
 drivers/net/wireless/rndis_wlan.c                  | 2 --
 drivers/net/wireless/st/cw1200/bh.c                | 2 --
 13 files changed, 21 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index d0967bb1f3871..57ac80997319b 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -3381,13 +3381,10 @@ EXPORT_SYMBOL(ath10k_core_create);
 
 void ath10k_core_destroy(struct ath10k *ar)
 {
-	flush_workqueue(ar->workqueue);
 	destroy_workqueue(ar->workqueue);
 
-	flush_workqueue(ar->workqueue_aux);
 	destroy_workqueue(ar->workqueue_aux);
 
-	flush_workqueue(ar->workqueue_tx_complete);
 	destroy_workqueue(ar->workqueue_tx_complete);
 
 	ath10k_debug_destroy(ar);
diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index 0fe639710a8bb..9d1b0890f3105 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -2651,7 +2651,6 @@ static void ath10k_sdio_remove(struct sdio_func *func)
 
 	ath10k_core_destroy(ar);
 
-	flush_workqueue(ar_sdio->workqueue);
 	destroy_workqueue(ar_sdio->workqueue);
 }
 
diff --git a/drivers/net/wireless/intel/iwlegacy/3945-mac.c b/drivers/net/wireless/intel/iwlegacy/3945-mac.c
index ef0ac42a55a2a..55c00a07bc4d3 100644
--- a/drivers/net/wireless/intel/iwlegacy/3945-mac.c
+++ b/drivers/net/wireless/intel/iwlegacy/3945-mac.c
@@ -3831,7 +3831,6 @@ il3945_pci_remove(struct pci_dev *pdev)
 	il3945_unset_hw_params(il);
 
 	/*netif_stop_queue(dev); */
-	flush_workqueue(il->workqueue);
 
 	/* ieee80211_unregister_hw calls il3945_mac_stop, which flushes
 	 * il->workqueue... so we can't take down the workqueue
diff --git a/drivers/net/wireless/intel/iwlegacy/4965-mac.c b/drivers/net/wireless/intel/iwlegacy/4965-mac.c
index 12cf22d0e9949..2549902552e1d 100644
--- a/drivers/net/wireless/intel/iwlegacy/4965-mac.c
+++ b/drivers/net/wireless/intel/iwlegacy/4965-mac.c
@@ -6745,7 +6745,6 @@ il4965_pci_remove(struct pci_dev *pdev)
 	il_eeprom_free(il);
 
 	/*netif_stop_queue(dev); */
-	flush_workqueue(il->workqueue);
 
 	/* ieee80211_unregister_hw calls il_mac_stop, which flushes
 	 * il->workqueue... so we can't take down the workqueue
diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/main.c b/drivers/net/wireless/intel/iwlwifi/dvm/main.c
index 461af58311561..6a19fc4c68604 100644
--- a/drivers/net/wireless/intel/iwlwifi/dvm/main.c
+++ b/drivers/net/wireless/intel/iwlwifi/dvm/main.c
@@ -1526,7 +1526,6 @@ static void iwl_op_mode_dvm_stop(struct iwl_op_mode *op_mode)
 	kfree(priv->nvm_data);
 
 	/*netif_stop_queue(dev); */
-	flush_workqueue(priv->workqueue);
 
 	/* ieee80211_unregister_hw calls iwlagn_mac_stop, which flushes
 	 * priv->workqueue... so we can't take down the workqueue
diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index 2f5f1ff22a601..e1196c565a62f 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -3155,13 +3155,11 @@ int mwifiex_del_virtual_intf(struct wiphy *wiphy, struct wireless_dev *wdev)
 		unregister_netdevice(wdev->netdev);
 
 	if (priv->dfs_cac_workqueue) {
-		flush_workqueue(priv->dfs_cac_workqueue);
 		destroy_workqueue(priv->dfs_cac_workqueue);
 		priv->dfs_cac_workqueue = NULL;
 	}
 
 	if (priv->dfs_chan_sw_workqueue) {
-		flush_workqueue(priv->dfs_chan_sw_workqueue);
 		destroy_workqueue(priv->dfs_chan_sw_workqueue);
 		priv->dfs_chan_sw_workqueue = NULL;
 	}
diff --git a/drivers/net/wireless/marvell/mwifiex/main.c b/drivers/net/wireless/marvell/mwifiex/main.c
index 6283df5aaaf8b..b8b79fe50dbc2 100644
--- a/drivers/net/wireless/marvell/mwifiex/main.c
+++ b/drivers/net/wireless/marvell/mwifiex/main.c
@@ -498,13 +498,11 @@ static void mwifiex_free_adapter(struct mwifiex_adapter *adapter)
 static void mwifiex_terminate_workqueue(struct mwifiex_adapter *adapter)
 {
 	if (adapter->workqueue) {
-		flush_workqueue(adapter->workqueue);
 		destroy_workqueue(adapter->workqueue);
 		adapter->workqueue = NULL;
 	}
 
 	if (adapter->rx_workqueue) {
-		flush_workqueue(adapter->rx_workqueue);
 		destroy_workqueue(adapter->rx_workqueue);
 		adapter->rx_workqueue = NULL;
 	}
diff --git a/drivers/net/wireless/microchip/wilc1000/netdev.c b/drivers/net/wireless/microchip/wilc1000/netdev.c
index c508f429984ab..463f3bfc3064d 100644
--- a/drivers/net/wireless/microchip/wilc1000/netdev.c
+++ b/drivers/net/wireless/microchip/wilc1000/netdev.c
@@ -840,7 +840,6 @@ void wilc_netdev_cleanup(struct wilc *wilc)
 	srcu_read_unlock(&wilc->srcu, srcu_idx);
 
 	wilc_wfi_deinit_mon_interface(wilc, false);
-	flush_workqueue(wilc->hif_workqueue);
 	destroy_workqueue(wilc->hif_workqueue);
 
 	while (ifc_cnt < WILC_NUM_CONCURRENT_IFC) {
diff --git a/drivers/net/wireless/quantenna/qtnfmac/core.c b/drivers/net/wireless/quantenna/qtnfmac/core.c
index bf6dbeb618423..d39c210da68e2 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/core.c
+++ b/drivers/net/wireless/quantenna/qtnfmac/core.c
@@ -816,13 +816,11 @@ void qtnf_core_detach(struct qtnf_bus *bus)
 	bus->fw_state = QTNF_FW_STATE_DETACHED;
 
 	if (bus->workqueue) {
-		flush_workqueue(bus->workqueue);
 		destroy_workqueue(bus->workqueue);
 		bus->workqueue = NULL;
 	}
 
 	if (bus->hprio_workqueue) {
-		flush_workqueue(bus->hprio_workqueue);
 		destroy_workqueue(bus->hprio_workqueue);
 		bus->hprio_workqueue = NULL;
 	}
diff --git a/drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c b/drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c
index 0f328ce47fee3..f65eb6e5b8d59 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c
+++ b/drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c
@@ -387,7 +387,6 @@ static int qtnf_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	return 0;
 
 error:
-	flush_workqueue(pcie_priv->workqueue);
 	destroy_workqueue(pcie_priv->workqueue);
 	pci_set_drvdata(pdev, NULL);
 	return ret;
@@ -416,7 +415,6 @@ static void qtnf_pcie_remove(struct pci_dev *dev)
 		qtnf_core_detach(bus);
 
 	netif_napi_del(&bus->mux_napi);
-	flush_workqueue(priv->workqueue);
 	destroy_workqueue(priv->workqueue);
 	tasklet_kill(&priv->reclaim_tq);
 
diff --git a/drivers/net/wireless/realtek/rtlwifi/pci.c b/drivers/net/wireless/realtek/rtlwifi/pci.c
index 679ae786cf450..6d9f2a6233a21 100644
--- a/drivers/net/wireless/realtek/rtlwifi/pci.c
+++ b/drivers/net/wireless/realtek/rtlwifi/pci.c
@@ -1704,7 +1704,6 @@ static void rtl_pci_deinit(struct ieee80211_hw *hw)
 	tasklet_kill(&rtlpriv->works.irq_tasklet);
 	cancel_work_sync(&rtlpriv->works.lps_change_work);
 
-	flush_workqueue(rtlpriv->works.rtl_wq);
 	destroy_workqueue(rtlpriv->works.rtl_wq);
 }
 
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index dc076d8448680..75c78e1c924b0 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -3497,7 +3497,6 @@ static int rndis_wlan_bind(struct usbnet *usbdev, struct usb_interface *intf)
 	cancel_delayed_work_sync(&priv->dev_poller_work);
 	cancel_delayed_work_sync(&priv->scan_work);
 	cancel_work_sync(&priv->work);
-	flush_workqueue(priv->workqueue);
 	destroy_workqueue(priv->workqueue);
 
 	wiphy_free(wiphy);
@@ -3514,7 +3513,6 @@ static void rndis_wlan_unbind(struct usbnet *usbdev, struct usb_interface *intf)
 	cancel_delayed_work_sync(&priv->dev_poller_work);
 	cancel_delayed_work_sync(&priv->scan_work);
 	cancel_work_sync(&priv->work);
-	flush_workqueue(priv->workqueue);
 	destroy_workqueue(priv->workqueue);
 
 	rndis_unbind(usbdev, intf);
diff --git a/drivers/net/wireless/st/cw1200/bh.c b/drivers/net/wireless/st/cw1200/bh.c
index 02efe8483cba6..361fef6e1eeaa 100644
--- a/drivers/net/wireless/st/cw1200/bh.c
+++ b/drivers/net/wireless/st/cw1200/bh.c
@@ -88,8 +88,6 @@ void cw1200_unregister_bh(struct cw1200_common *priv)
 	atomic_add(1, &priv->bh_term);
 	wake_up(&priv->bh_wq);
 
-	flush_workqueue(priv->bh_workqueue);
-
 	destroy_workqueue(priv->bh_workqueue);
 	priv->bh_workqueue = NULL;
 
-- 
2.43.0

[PATCH 5.10 066/238] wifi: wilc1000: prevent use-after-free on vif when cleaning up all interfaces

[Sasha Levin]

From: Alexis Lothoré <alexis.lothore@bootlin.com>

[ Upstream commit cb5942b77c05d54310a0420cac12935e9b6aa21c ]

wilc_netdev_cleanup currently triggers a KASAN warning, which can be
observed on interface registration error path, or simply by
removing the module/unbinding device from driver:

echo spi0.1 > /sys/bus/spi/drivers/wilc1000_spi/unbind

==================================================================
BUG: KASAN: slab-use-after-free in wilc_netdev_cleanup+0x508/0x5cc
Read of size 4 at addr c54d1ce8 by task sh/86

CPU: 0 PID: 86 Comm: sh Not tainted 6.8.0-rc1+ #117
Hardware name: Atmel SAMA5
 unwind_backtrace from show_stack+0x18/0x1c
 show_stack from dump_stack_lvl+0x34/0x58
 dump_stack_lvl from print_report+0x154/0x500
 print_report from kasan_report+0xac/0xd8
 kasan_report from wilc_netdev_cleanup+0x508/0x5cc
 wilc_netdev_cleanup from wilc_bus_remove+0xc8/0xec
 wilc_bus_remove from spi_remove+0x8c/0xac
 spi_remove from device_release_driver_internal+0x434/0x5f8
 device_release_driver_internal from unbind_store+0xbc/0x108
 unbind_store from kernfs_fop_write_iter+0x398/0x584
 kernfs_fop_write_iter from vfs_write+0x728/0xf88
 vfs_write from ksys_write+0x110/0x1e4
 ksys_write from ret_fast_syscall+0x0/0x1c

[...]

Allocated by task 1:
 kasan_save_track+0x30/0x5c
 __kasan_kmalloc+0x8c/0x94
 __kmalloc_node+0x1cc/0x3e4
 kvmalloc_node+0x48/0x180
 alloc_netdev_mqs+0x68/0x11dc
 alloc_etherdev_mqs+0x28/0x34
 wilc_netdev_ifc_init+0x34/0x8ec
 wilc_cfg80211_init+0x690/0x910
 wilc_bus_probe+0xe0/0x4a0
 spi_probe+0x158/0x1b0
 really_probe+0x270/0xdf4
 __driver_probe_device+0x1dc/0x580
 driver_probe_device+0x60/0x140
 __driver_attach+0x228/0x5d4
 bus_for_each_dev+0x13c/0x1a8
 bus_add_driver+0x2a0/0x608
 driver_register+0x24c/0x578
 do_one_initcall+0x180/0x310
 kernel_init_freeable+0x424/0x484
 kernel_init+0x20/0x148
 ret_from_fork+0x14/0x28

Freed by task 86:
 kasan_save_track+0x30/0x5c
 kasan_save_free_info+0x38/0x58
 __kasan_slab_free+0xe4/0x140
 kfree+0xb0/0x238
 device_release+0xc0/0x2a8
 kobject_put+0x1d4/0x46c
 netdev_run_todo+0x8fc/0x11d0
 wilc_netdev_cleanup+0x1e4/0x5cc
 wilc_bus_remove+0xc8/0xec
 spi_remove+0x8c/0xac
 device_release_driver_internal+0x434/0x5f8
 unbind_store+0xbc/0x108
 kernfs_fop_write_iter+0x398/0x584
 vfs_write+0x728/0xf88
 ksys_write+0x110/0x1e4
 ret_fast_syscall+0x0/0x1c
 [...]

David Mosberger-Tan initial investigation [1] showed that this
use-after-free is due to netdevice unregistration during vif list
traversal. When unregistering a net device, since the needs_free_netdev has
been set to true during registration, the netdevice object is also freed,
and as a consequence, the corresponding vif object too, since it is
attached to it as private netdevice data. The next occurrence of the loop
then tries to access freed vif pointer to the list to move forward in the
list.

Fix this use-after-free thanks to two mechanisms:
- navigate in the list with list_for_each_entry_safe, which allows to
  safely modify the list as we go through each element. For each element,
  remove it from the list with list_del_rcu
- make sure to wait for RCU grace period end after each vif removal to make
  sure it is safe to free the corresponding vif too (through
  unregister_netdev)

Since we are in a RCU "modifier" path (not a "reader" path), and because
such path is expected not to be concurrent to any other modifier (we are
using the vif_mutex lock), we do not need to use RCU list API, that's why
we can benefit from list_for_each_entry_safe.

[1] https://lore.kernel.org/linux-wireless/ab077dbe58b1ea5de0a3b2ca21f275a07af967d2.camel@egauge.net/

Fixes: 8399918f3056 ("staging: wilc1000: use RCU list to maintain vif interfaces list")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240212-wilc_rework_deinit-v1-1-9203ae56c27f@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/microchip/wilc1000/netdev.c  | 28 +++++--------------
 1 file changed, 7 insertions(+), 21 deletions(-)

diff --git a/drivers/net/wireless/microchip/wilc1000/netdev.c b/drivers/net/wireless/microchip/wilc1000/netdev.c
index 463f3bfc3064d..ab84b146aa272 100644
--- a/drivers/net/wireless/microchip/wilc1000/netdev.c
+++ b/drivers/net/wireless/microchip/wilc1000/netdev.c
@@ -821,8 +821,7 @@ static const struct net_device_ops wilc_netdev_ops = {
 
 void wilc_netdev_cleanup(struct wilc *wilc)
 {
-	struct wilc_vif *vif;
-	int srcu_idx, ifc_cnt = 0;
+	struct wilc_vif *vif, *vif_tmp;
 
 	if (!wilc)
 		return;
@@ -832,32 +831,19 @@ void wilc_netdev_cleanup(struct wilc *wilc)
 		wilc->firmware = NULL;
 	}
 
-	srcu_idx = srcu_read_lock(&wilc->srcu);
-	list_for_each_entry_rcu(vif, &wilc->vif_list, list) {
+	list_for_each_entry_safe(vif, vif_tmp, &wilc->vif_list, list) {
+		mutex_lock(&wilc->vif_mutex);
+		list_del_rcu(&vif->list);
+		wilc->vif_num--;
+		mutex_unlock(&wilc->vif_mutex);
+		synchronize_srcu(&wilc->srcu);
 		if (vif->ndev)
 			unregister_netdev(vif->ndev);
 	}
-	srcu_read_unlock(&wilc->srcu, srcu_idx);
 
 	wilc_wfi_deinit_mon_interface(wilc, false);
 	destroy_workqueue(wilc->hif_workqueue);
 
-	while (ifc_cnt < WILC_NUM_CONCURRENT_IFC) {
-		mutex_lock(&wilc->vif_mutex);
-		if (wilc->vif_num <= 0) {
-			mutex_unlock(&wilc->vif_mutex);
-			break;
-		}
-		vif = wilc_get_wl_to_vif(wilc);
-		if (!IS_ERR(vif))
-			list_del_rcu(&vif->list);
-
-		wilc->vif_num--;
-		mutex_unlock(&wilc->vif_mutex);
-		synchronize_srcu(&wilc->srcu);
-		ifc_cnt++;
-	}
-
 	wilc_wlan_cfg_deinit(wilc);
 	wlan_deinit_locks(wilc);
 	kfree(wilc->bus_data);
-- 
2.43.0

[PATCH 5.10 067/238] ACPI: processor_idle: Fix memory leak in acpi_processor_power_exit()

[Sasha Levin]

From: Armin Wolf <W_Armin@gmx.de>

[ Upstream commit e18afcb7b2a12b635ac10081f943fcf84ddacc51 ]

After unregistering the CPU idle device, the memory associated with
it is not freed, leading to a memory leak:

unreferenced object 0xffff896282f6c000 (size 1024):
  comm "swapper/0", pid 1, jiffies 4294893170
  hex dump (first 32 bytes):
    00 00 00 00 0b 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace (crc 8836a742):
    [<ffffffff993495ed>] kmalloc_trace+0x29d/0x340
    [<ffffffff9972f3b3>] acpi_processor_power_init+0xf3/0x1c0
    [<ffffffff9972d263>] __acpi_processor_start+0xd3/0xf0
    [<ffffffff9972d2bc>] acpi_processor_start+0x2c/0x50
    [<ffffffff99805872>] really_probe+0xe2/0x480
    [<ffffffff99805c98>] __driver_probe_device+0x78/0x160
    [<ffffffff99805daf>] driver_probe_device+0x1f/0x90
    [<ffffffff9980601e>] __driver_attach+0xce/0x1c0
    [<ffffffff99803170>] bus_for_each_dev+0x70/0xc0
    [<ffffffff99804822>] bus_add_driver+0x112/0x210
    [<ffffffff99807245>] driver_register+0x55/0x100
    [<ffffffff9aee4acb>] acpi_processor_driver_init+0x3b/0xc0
    [<ffffffff990012d1>] do_one_initcall+0x41/0x300
    [<ffffffff9ae7c4b0>] kernel_init_freeable+0x320/0x470
    [<ffffffff99b231f6>] kernel_init+0x16/0x1b0
    [<ffffffff99042e6d>] ret_from_fork+0x2d/0x50

Fix this by freeing the CPU idle device after unregistering it.

Fixes: 3d339dcbb56d ("cpuidle / ACPI : move cpuidle_device field out of the acpi_processor_power structure")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/processor_idle.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 59781e765e0e2..3deeabb273940 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -1427,6 +1427,8 @@ int acpi_processor_power_exit(struct acpi_processor *pr)
 		acpi_processor_registered--;
 		if (acpi_processor_registered == 0)
 			cpuidle_unregister_driver(&acpi_idle_driver);
+
+		kfree(dev);
 	}
 
 	pr->flags.power_setup_done = 0;
-- 
2.43.0

[PATCH 5.10 068/238] bus: tegra-aconnect: Update dependency to ARCH_TEGRA

[Sasha Levin]

From: Peter Robinson <pbrobinson@gmail.com>

[ Upstream commit 4acd21a45c1446277e2abaece97d7fa7c2e692a9 ]

Update the architecture dependency to be the generic Tegra
because the driver works on the four latest Tegra generations
not just Tegra210, if you build a kernel with a specific
ARCH_TEGRA_xxx_SOC option that excludes Tegra210 you don't get
this driver.

Fixes: 46a88534afb59 ("bus: Add support for Tegra ACONNECT")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bus/Kconfig | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 0c262c2aeaf2f..01f2349dbfaed 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -176,11 +176,12 @@ config SUNXI_RSB
 
 config TEGRA_ACONNECT
 	tristate "Tegra ACONNECT Bus Driver"
-	depends on ARCH_TEGRA_210_SOC
+	depends on ARCH_TEGRA
 	depends on OF && PM
 	help
 	  Driver for the Tegra ACONNECT bus which is used to interface with
-	  the devices inside the Audio Processing Engine (APE) for Tegra210.
+	  the devices inside the Audio Processing Engine (APE) for
+	  Tegra210 and later.
 
 config TEGRA_GMI
 	tristate "Tegra Generic Memory Interface bus driver"
-- 
2.43.0

[PATCH 5.10 069/238] iommu/amd: Mark interrupt as managed

[Sasha Levin]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit 0feda94c868d396fac3b3cb14089d2d989a07c72 ]

On many systems that have an AMD IOMMU the following sequence of
warnings is observed during bootup.

```
pci 0000:00:00.2  can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
```

This series of events happens because of the IOMMU initialization
sequence order and the lack of _PRT entries for the IOMMU.

During initialization the IOMMU driver first enables the PCI device
using pci_enable_device().  This will call acpi_pci_irq_enable()
which will check if the interrupt is declared in a PCI routing table
(_PRT) entry. According to the PCI spec [1] these routing entries
are only required under PCI root bridges:
	The _PRT object is required under all PCI root bridges

The IOMMU is directly connected to the root complex, so there is no
parent bridge to look for a _PRT entry. The first warning is emitted
since no entry could be found in the hierarchy. The second warning is
then emitted because the interrupt hasn't yet been configured to any
value.  The pin was configured in pci_read_irq() but the byte in
PCI_INTERRUPT_LINE return 0xff which means "Unknown".

After that sequence of events pci_enable_msi() is called and this
will allocate an interrupt.

That is both of these warnings are totally harmless because the IOMMU
uses MSI for interrupts.  To avoid even trying to probe for a _PRT
entry mark the IOMMU as IRQ managed. This avoids both warnings.

Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/06_Device_Configuration/Device_Configuration.html?highlight=_prt#prt-pci-routing-table [1]
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Fixes: cffe0a2b5a34 ("x86, irq: Keep balance of IOAPIC pin reference count")
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240122233400.1802-1-mario.limonciello@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/amd/init.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c
index 603f625a74e54..91cc3a5643caf 100644
--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -1827,6 +1827,9 @@ static int __init iommu_init_pci(struct amd_iommu *iommu)
 	/* Prevent binding other PCI device drivers to IOMMU devices */
 	iommu->dev->match_driver = false;
 
+	/* ACPI _PRT won't have an IRQ for IOMMU */
+	iommu->dev->irq_managed = 1;
+
 	pci_read_config_dword(iommu->dev, cap_ptr + MMIO_CAP_HDR_OFFSET,
 			      &iommu->cap);
 
-- 
2.43.0

[PATCH 5.10 070/238] wifi: brcmsmac: avoid function pointer casts

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit e1ea6db35fc3ba5ff063f097385e9f7a88c25356 ]

An old cleanup went a little too far and causes a warning with clang-16
and higher as it breaks control flow integrity (KCFI) rules:

drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c:64:34: error: cast from 'void (*)(struct brcms_phy *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
   64 |                         brcms_init_timer(physhim->wl, (void (*)(void *))fn,
      |                                                       ^~~~~~~~~~~~~~~~~~~~

Change this one instance back to passing a void pointer so it can be
used with the timer callback interface.

Fixes: d89a4c80601d ("staging: brcm80211: removed void * from softmac phy")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240213100548.457854-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_cmn.c   | 3 ++-
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c  | 5 ++---
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.h  | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_cmn.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_cmn.c
index ccc621b8ed9f2..4a1fe982a948e 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_cmn.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_cmn.c
@@ -383,8 +383,9 @@ struct shared_phy *wlc_phy_shared_attach(struct shared_phy_params *shp)
 	return sh;
 }
 
-static void wlc_phy_timercb_phycal(struct brcms_phy *pi)
+static void wlc_phy_timercb_phycal(void *ptr)
 {
+	struct brcms_phy *pi = ptr;
 	uint delay = 5;
 
 	if (PHY_PERICAL_MPHASE_PENDING(pi)) {
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c
index a0de5db0cd646..b723817915365 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c
@@ -57,12 +57,11 @@ void wlc_phy_shim_detach(struct phy_shim_info *physhim)
 }
 
 struct wlapi_timer *wlapi_init_timer(struct phy_shim_info *physhim,
-				     void (*fn)(struct brcms_phy *pi),
+				     void (*fn)(void *pi),
 				     void *arg, const char *name)
 {
 	return (struct wlapi_timer *)
-			brcms_init_timer(physhim->wl, (void (*)(void *))fn,
-					 arg, name);
+			brcms_init_timer(physhim->wl, fn, arg, name);
 }
 
 void wlapi_free_timer(struct wlapi_timer *t)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.h b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.h
index dd8774717adee..27d0934e600ed 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.h
@@ -131,7 +131,7 @@ void wlc_phy_shim_detach(struct phy_shim_info *physhim);
 
 /* PHY to WL utility functions */
 struct wlapi_timer *wlapi_init_timer(struct phy_shim_info *physhim,
-				     void (*fn)(struct brcms_phy *pi),
+				     void (*fn)(void *pi),
 				     void *arg, const char *name);
 void wlapi_free_timer(struct wlapi_timer *t);
 void wlapi_add_timer(struct wlapi_timer *t, uint ms, int periodic);
-- 
2.43.0

[PATCH 5.10 071/238] net: ena: Remove ena_select_queue

[Sasha Levin]

From: Kamal Heib <kheib@redhat.com>

[ Upstream commit 78e886ba2b549945ecada055ee0765f0ded5707a ]

Avoid the following warnings by removing the ena_select_queue() function
and rely on the net core to do the queue selection, The issue happen
when an skb received from an interface with more queues than ena is
forwarded to the ena interface.

[ 1176.159959] eth0 selects TX queue 11, but real number of TX queues is 8
[ 1176.863976] eth0 selects TX queue 14, but real number of TX queues is 8
[ 1180.767877] eth0 selects TX queue 14, but real number of TX queues is 8
[ 1188.703742] eth0 selects TX queue 14, but real number of TX queues is 8

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Kamal Heib <kheib@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amazon/ena/ena_netdev.c | 17 -----------------
 1 file changed, 17 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c
index e13ae04d2f0fd..fa65971949fce 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.c
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c
@@ -3057,22 +3057,6 @@ static netdev_tx_t ena_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	return NETDEV_TX_OK;
 }
 
-static u16 ena_select_queue(struct net_device *dev, struct sk_buff *skb,
-			    struct net_device *sb_dev)
-{
-	u16 qid;
-	/* we suspect that this is good for in--kernel network services that
-	 * want to loop incoming skb rx to tx in normal user generated traffic,
-	 * most probably we will not get to this
-	 */
-	if (skb_rx_queue_recorded(skb))
-		qid = skb_get_rx_queue(skb);
-	else
-		qid = netdev_pick_tx(dev, skb, NULL);
-
-	return qid;
-}
-
 static void ena_config_host_info(struct ena_com_dev *ena_dev, struct pci_dev *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -3242,7 +3226,6 @@ static const struct net_device_ops ena_netdev_ops = {
 	.ndo_open		= ena_open,
 	.ndo_stop		= ena_close,
 	.ndo_start_xmit		= ena_start_xmit,
-	.ndo_select_queue	= ena_select_queue,
 	.ndo_get_stats64	= ena_get_stats64,
 	.ndo_tx_timeout		= ena_tx_timeout,
 	.ndo_change_mtu		= ena_change_mtu,
-- 
2.43.0

[PATCH 5.10 072/238] ARM: dts: arm: realview: Fix development chip ROM compatible value

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 3baa4c5143d65ebab2de0d99a395e5f4f1f46608 ]

When the development chip ROM was added, the "direct-mapped" compatible
value was already obsolete.  In addition, the device node lacked the
accompanying "probe-type" property, causing the old physmap_of_core
driver to fall back to trying all available probe types.
Unfortunately this fallback was lost when the DT and pdata cases were
merged.

Fix this by using the modern "mtd-rom" compatible value instead.

Fixes: 5c3f5edbe0a1dff3 ("ARM: realview: add flash devices to the PB1176 DTS")
Fixes: 642b1e8dbed7bbbf ("mtd: maps: Merge physmap_of.c into physmap-core.c")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/arm-realview-pb1176.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index f925782f85604..f0be83eebb09d 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -435,7 +435,7 @@ pb1176_serial3: serial@1010f000 {
 
 		/* Direct-mapped development chip ROM */
 		pb1176_rom@10200000 {
-			compatible = "direct-mapped";
+			compatible = "mtd-rom";
 			reg = <0x10200000 0x4000>;
 			bank-width = <1>;
 		};
-- 
2.43.0

[PATCH 5.10 073/238] ARM: dts: imx6dl-yapp4: Move phy reset into switch node

[Sasha Levin]

From: Michal Vokáč <michal.vokac@ysoft.com>

[ Upstream commit 7da7b84fee58c85a6075022023d31edea40e81a1 ]

Drop the phy-reset-duration and phy-reset-gpios deprecated properties and
move reset-gpios under the switch node.

Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stable-dep-of: 023bd910d3ab ("ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index ebc0892e37c7a..f18da2b70fdc9 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -103,8 +103,6 @@ &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <20>;
 	phy-supply = <&sw2_reg>;
 	status = "okay";
 
@@ -128,6 +126,7 @@ phy_port3: phy@2 {
 		switch@10 {
 			compatible = "qca,qca8334";
 			reg = <10>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 
 			switch_ports: ports {
 				#address-cells = <1>;
-- 
2.43.0

[PATCH 5.10 074/238] ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address

[Sasha Levin]

From: Michal Vokáč <michal.vokac@ysoft.com>

[ Upstream commit 023bd910d3ab735459f84b22bb99fb9e00bd9d76 ]

This change does not have any functional effect. The switch works just
fine without this patch as it has full access to all the addresses
on the bus. This is simply a clean-up to set the node name address
and reg address to the same value.

Fixes: 15b43e497ffd ("ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index f18da2b70fdc9..b636faaddc510 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -125,7 +125,7 @@ phy_port3: phy@2 {
 
 		switch@10 {
 			compatible = "qca,qca8334";
-			reg = <10>;
+			reg = <0x10>;
 			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 
 			switch_ports: ports {
-- 
2.43.0

[PATCH 5.10 075/238] ARM: dts: imx6dl-yapp4: Move the internal switch PHYs under the switch node

[Sasha Levin]

From: Michal Vokáč <michal.vokac@ysoft.com>

[ Upstream commit 79978bff2e4b8e05ebdf5fc3ee6b794002393484 ]

We identified that the PHYs actually do not work since commit 7da7b84fee58
("ARM: dts: imx6dl-yapp4: Move phy reset into switch node") as
a coincidence of several circumstances.

The reset signal is kept asserted by a pull-down resistor on the board
unless it is deasserted by GPIO from the SoC. This is to keep the switch
dead until it is configured properly by the kernel and user space.

Prior to the referenced commit the switch was reset by the FEC driver
and the reset GPIO was actively deasserted. The mdio-bus was scanned
and the attached switch and its PHYs were found and configured.

With the referenced commit the switch is reset by the qca8k driver.
Because of another bug in the qca8k driver, functionality of the reset
pin depends on its pre-kernel configuration. See commit c44fc98f0a8f
("net: dsa: qca8k: fix illegal usage of GPIO")

The problem did not appear until we removed support for the switch
and configuration of its reset pin from the bootloader.

To fix that, properly describe the internal mdio-bus configuration of
the qca8334 switch. The PHYs are internal to the switch and sit on its
internal mdio-bus.

Fixes: 7da7b84fee58 ("ARM: dts: imx6dl-yapp4: Move phy reset into switch node")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 23 ++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index b636faaddc510..cbf5a76625e69 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -115,14 +115,6 @@ mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy_port2: phy@1 {
-			reg = <1>;
-		};
-
-		phy_port3: phy@2 {
-			reg = <2>;
-		};
-
 		switch@10 {
 			compatible = "qca,qca8334";
 			reg = <0x10>;
@@ -147,15 +139,30 @@ fixed-link {
 				eth2: port@2 {
 					reg = <2>;
 					label = "eth2";
+					phy-mode = "internal";
 					phy-handle = <&phy_port2>;
 				};
 
 				eth1: port@3 {
 					reg = <3>;
 					label = "eth1";
+					phy-mode = "internal";
 					phy-handle = <&phy_port3>;
 				};
 			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy_port2: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy_port3: ethernet-phy@2 {
+					reg = <2>;
+				};
+			};
 		};
 	};
 };
-- 
2.43.0

[PATCH 5.10 076/238] arm64: dts: marvell: reorder crypto interrupts on Armada SoCs

[Sasha Levin]

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit ec55a22149d64f9ac41845d923b884d4a666bf4d ]

Match order specified in binding documentation. It says "mem" should be
the last interrupt.

This fixes:
arch/arm64/boot/dts/marvell/armada-3720-db.dtb: crypto@90000: interrupt-names:0: 'ring0' was expected
        from schema $id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml#
arch/arm64/boot/dts/marvell/armada-3720-db.dtb: crypto@90000: interrupt-names:1: 'ring1' was expected
        from schema $id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml#
arch/arm64/boot/dts/marvell/armada-3720-db.dtb: crypto@90000: interrupt-names:2: 'ring2' was expected
        from schema $id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml#
arch/arm64/boot/dts/marvell/armada-3720-db.dtb: crypto@90000: interrupt-names:3: 'ring3' was expected
        from schema $id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml#
arch/arm64/boot/dts/marvell/armada-3720-db.dtb: crypto@90000: interrupt-names:4: 'eip' was expected
        from schema $id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml#
arch/arm64/boot/dts/marvell/armada-3720-db.dtb: crypto@90000: interrupt-names:5: 'mem' was expected
        from schema $id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml#

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi  | 10 +++++-----
 arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 10 +++++-----
 2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 0f4bcd15d8580..086c3cc7d055c 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -414,14 +414,14 @@ xor11 {
 			crypto: crypto@90000 {
 				compatible = "inside-secure,safexcel-eip97ies";
 				reg = <0x90000 0x20000>;
-				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "mem", "ring0", "ring1",
-						  "ring2", "ring3", "eip";
+					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "ring0", "ring1", "ring2",
+						  "ring3", "eip", "mem";
 				clocks = <&nb_periph_clk 15>;
 			};
 
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index 9dcf16beabf5d..da83bfdbe8432 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -477,14 +477,14 @@ CP11X_LABEL(sdhci0): sdhci@780000 {
 		CP11X_LABEL(crypto): crypto@800000 {
 			compatible = "inside-secure,safexcel-eip197b";
 			reg = <0x800000 0x200000>;
-			interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
-				<88 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <88 IRQ_TYPE_LEVEL_HIGH>,
 				<89 IRQ_TYPE_LEVEL_HIGH>,
 				<90 IRQ_TYPE_LEVEL_HIGH>,
 				<91 IRQ_TYPE_LEVEL_HIGH>,
-				<92 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mem", "ring0", "ring1",
-				"ring2", "ring3", "eip";
+				<92 IRQ_TYPE_LEVEL_HIGH>,
+				<87 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ring0", "ring1", "ring2", "ring3",
+					  "eip", "mem";
 			clock-names = "core", "reg";
 			clocks = <&CP11X_LABEL(clk) 1 26>,
 				 <&CP11X_LABEL(clk) 1 17>;
-- 
2.43.0

[PATCH 5.10 077/238] ACPI: scan: Fix device check notification handling

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit 793551c965116d9dfaf0550dacae1396a20efa69 ]

It is generally invalid to fail a Device Check notification if the scan
handler has not been attached to the given device after a bus rescan,
because there may be valid reasons for the scan handler to refuse
attaching to the device (for example, the device is not ready).

For this reason, modify acpi_scan_device_check() to return 0 in that
case without printing a warning.

While at it, reduce the log level of the "already enumerated" message
in the same function, because it is only interesting when debugging
notification handling

Fixes: 443fc8202272 ("ACPI / hotplug: Rework generic code to handle suprise removals")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/scan.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 67a5ee2fedfd3..f17f48bc13bc0 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -321,18 +321,14 @@ static int acpi_scan_device_check(struct acpi_device *adev)
 		 * again).
 		 */
 		if (adev->handler) {
-			dev_warn(&adev->dev, "Already enumerated\n");
-			return -EALREADY;
+			dev_dbg(&adev->dev, "Already enumerated\n");
+			return 0;
 		}
 		error = acpi_bus_scan(adev->handle);
 		if (error) {
 			dev_warn(&adev->dev, "Namespace scan failure\n");
 			return error;
 		}
-		if (!adev->handler) {
-			dev_warn(&adev->dev, "Enumeration failure\n");
-			error = -ENODEV;
-		}
 	} else {
 		error = acpi_scan_device_not_present(adev);
 	}
-- 
2.43.0

[PATCH 5.10 078/238] x86, relocs: Ignore relocations in .notes section

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit aaa8736370db1a78f0e8434344a484f9fd20be3b ]

When building with CONFIG_XEN_PV=y, .text symbols are emitted into
the .notes section so that Xen can find the "startup_xen" entry point.
This information is used prior to booting the kernel, so relocations
are not useful. In fact, performing relocations against the .notes
section means that the KASLR base is exposed since /sys/kernel/notes
is world-readable.

To avoid leaking the KASLR base without breaking unprivileged tools that
are expecting to read /sys/kernel/notes, skip performing relocations in
the .notes section. The values readable in .notes are then identical to
those found in System.map.

Reported-by: Guixiong Wei <guixiongwei@gmail.com>
Closes: https://lore.kernel.org/all/20240218073501.54555-1-guixiongwei@gmail.com/
Fixes: 5ead97c84fa7 ("xen: Core Xen implementation")
Fixes: da1a679cde9b ("Add /sys/kernel/notes")
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/tools/relocs.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c
index 1c3a1962cade6..0043fd374a62f 100644
--- a/arch/x86/tools/relocs.c
+++ b/arch/x86/tools/relocs.c
@@ -596,6 +596,14 @@ static void print_absolute_relocs(void)
 		if (!(sec_applies->shdr.sh_flags & SHF_ALLOC)) {
 			continue;
 		}
+		/*
+		 * Do not perform relocations in .notes section; any
+		 * values there are meant for pre-boot consumption (e.g.
+		 * startup_xen).
+		 */
+		if (sec_applies->shdr.sh_type == SHT_NOTE) {
+			continue;
+		}
 		sh_symtab  = sec_symtab->symtab;
 		sym_strtab = sec_symtab->link->strtab;
 		for (j = 0; j < sec->shdr.sh_size/sizeof(Elf_Rel); j++) {
-- 
2.43.0

[PATCH 5.10 079/238] SUNRPC: fix some memleaks in gssx_dec_option_array

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit 3cfcfc102a5e57b021b786a755a38935e357797d ]

The creds and oa->data need to be freed in the error-handling paths after
their allocation. So this patch add these deallocations in the
corresponding paths.

Fixes: 1d658336b05f ("SUNRPC: Add RPC based upcall mechanism for RPCGSS auth")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/auth_gss/gss_rpc_xdr.c | 27 +++++++++++++++++++--------
 1 file changed, 19 insertions(+), 8 deletions(-)

diff --git a/net/sunrpc/auth_gss/gss_rpc_xdr.c b/net/sunrpc/auth_gss/gss_rpc_xdr.c
index 2ff7b7083ebab..e265b8d38aa14 100644
--- a/net/sunrpc/auth_gss/gss_rpc_xdr.c
+++ b/net/sunrpc/auth_gss/gss_rpc_xdr.c
@@ -250,8 +250,8 @@ static int gssx_dec_option_array(struct xdr_stream *xdr,
 
 	creds = kzalloc(sizeof(struct svc_cred), GFP_KERNEL);
 	if (!creds) {
-		kfree(oa->data);
-		return -ENOMEM;
+		err = -ENOMEM;
+		goto free_oa;
 	}
 
 	oa->data[0].option.data = CREDS_VALUE;
@@ -265,29 +265,40 @@ static int gssx_dec_option_array(struct xdr_stream *xdr,
 
 		/* option buffer */
 		p = xdr_inline_decode(xdr, 4);
-		if (unlikely(p == NULL))
-			return -ENOSPC;
+		if (unlikely(p == NULL)) {
+			err = -ENOSPC;
+			goto free_creds;
+		}
 
 		length = be32_to_cpup(p);
 		p = xdr_inline_decode(xdr, length);
-		if (unlikely(p == NULL))
-			return -ENOSPC;
+		if (unlikely(p == NULL)) {
+			err = -ENOSPC;
+			goto free_creds;
+		}
 
 		if (length == sizeof(CREDS_VALUE) &&
 		    memcmp(p, CREDS_VALUE, sizeof(CREDS_VALUE)) == 0) {
 			/* We have creds here. parse them */
 			err = gssx_dec_linux_creds(xdr, creds);
 			if (err)
-				return err;
+				goto free_creds;
 			oa->data[0].value.len = 1; /* presence */
 		} else {
 			/* consume uninteresting buffer */
 			err = gssx_dec_buffer(xdr, &dummy);
 			if (err)
-				return err;
+				goto free_creds;
 		}
 	}
 	return 0;
+
+free_creds:
+	kfree(creds);
+free_oa:
+	kfree(oa->data);
+	oa->data = NULL;
+	return err;
 }
 
 static int gssx_dec_status(struct xdr_stream *xdr,
-- 
2.43.0

[PATCH 5.10 080/238] mmc: wmt-sdmmc: remove an incorrect release_mem_region() call in the .remove function

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit ae5004a40a262d329039b99b62bd3fe7645b66ad ]

This looks strange to call release_mem_region() in a remove function
without any request_mem_region() in the probe or "struct resource"
somewhere.

So remove the corresponding code.

Fixes: 3a96dff0f828 ("mmc: SD/MMC Host Controller for Wondermedia WM8505/WM8650")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/bb0bb1ed1e18de55e8c0547625bde271e64b8c31.1708983064.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/wmt-sdmmc.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/mmc/host/wmt-sdmmc.c b/drivers/mmc/host/wmt-sdmmc.c
index 3933195488575..3fcc81e48ad66 100644
--- a/drivers/mmc/host/wmt-sdmmc.c
+++ b/drivers/mmc/host/wmt-sdmmc.c
@@ -889,7 +889,6 @@ static int wmt_mci_remove(struct platform_device *pdev)
 {
 	struct mmc_host *mmc;
 	struct wmt_mci_priv *priv;
-	struct resource *res;
 	u32 reg_tmp;
 
 	mmc = platform_get_drvdata(pdev);
@@ -917,9 +916,6 @@ static int wmt_mci_remove(struct platform_device *pdev)
 	clk_disable_unprepare(priv->clk_sdmmc);
 	clk_put(priv->clk_sdmmc);
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-
 	mmc_free_host(mmc);
 
 	dev_info(&pdev->dev, "WMT MCI device removed\n");
-- 
2.43.0

[PATCH 5.10 081/238] wifi: rtw88: 8821c: Fix false alarm count

[Sasha Levin]

From: Bitterblue Smith <rtl8821cerfe2@gmail.com>

[ Upstream commit c238adbc578eeb70cbc8fdd1bef3666b0f585b13 ]

total_fa_cnt is supposed to include cck_fa_cnt and ofdm_fa_cnt, not just
ofdm_fa_cnt.

Fixes: 960361238b86 ("rtw88: 8821c: add false alarm statistics")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/f3cb6d17-e4e4-44a7-9c9b-72aed994b5c9@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw88/rtw8821c.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtw88/rtw8821c.c b/drivers/net/wireless/realtek/rtw88/rtw8821c.c
index f9615f76f1734..d517f92b6180b 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8821c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8821c.c
@@ -579,9 +579,9 @@ static void rtw8821c_false_alarm_statistics(struct rtw_dev *rtwdev)
 
 	dm_info->cck_fa_cnt = cck_fa_cnt;
 	dm_info->ofdm_fa_cnt = ofdm_fa_cnt;
+	dm_info->total_fa_cnt = ofdm_fa_cnt;
 	if (cck_enable)
 		dm_info->total_fa_cnt += cck_fa_cnt;
-	dm_info->total_fa_cnt = ofdm_fa_cnt;
 
 	crc32_cnt = rtw_read32(rtwdev, REG_CRC_CCK);
 	dm_info->cck_ok_cnt = FIELD_GET(GENMASK(15, 0), crc32_cnt);
-- 
2.43.0

[PATCH 5.10 082/238] PCI: Make pci_dev_is_disconnected() helper public for other drivers

[Sasha Levin]

From: Ethan Zhao <haifeng.zhao@linux.intel.com>

[ Upstream commit 39714fd73c6b60a8d27bcc5b431afb0828bf4434 ]

Make pci_dev_is_disconnected() public so that it can be called from
Intel VT-d driver to quickly fix/workaround the surprise removal
unplug hang issue for those ATS capable devices on PCIe switch downstream
hotplug capable ports.

Beside pci_device_is_present() function, this one has no config space
space access, so is light enough to optimize the normal pure surprise
removal and safe removal flow.

Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Tested-by: Haorong Ye <yehaorong@bytedance.com>
Signed-off-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Link: https://lore.kernel.org/r/20240301080727.3529832-2-haifeng.zhao@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stable-dep-of: 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci.h   | 5 -----
 include/linux/pci.h | 5 +++++
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 72436000ff252..32fa07bfc448e 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -399,11 +399,6 @@ static inline int pci_dev_set_disconnected(struct pci_dev *dev, void *unused)
 	return 0;
 }
 
-static inline bool pci_dev_is_disconnected(const struct pci_dev *dev)
-{
-	return dev->error_state == pci_channel_io_perm_failure;
-}
-
 /* pci_dev priv_flags */
 #define PCI_DEV_ADDED 0
 #define PCI_DPC_RECOVERED 1
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 550e1cdb473fa..bf46453475e31 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -2191,6 +2191,11 @@ static inline struct pci_dev *pcie_find_root_port(struct pci_dev *dev)
 	return NULL;
 }
 
+static inline bool pci_dev_is_disconnected(const struct pci_dev *dev)
+{
+	return dev->error_state == pci_channel_io_perm_failure;
+}
+
 void pci_request_acs(void);
 bool pci_acs_enabled(struct pci_dev *pdev, u16 acs_flags);
 bool pci_acs_path_enabled(struct pci_dev *start,
-- 
2.43.0

[PATCH 5.10 083/238] iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected

[Sasha Levin]

From: Ethan Zhao <haifeng.zhao@linux.intel.com>

[ Upstream commit 4fc82cd907ac075648789cc3a00877778aa1838b ]

For those endpoint devices connect to system via hotplug capable ports,
users could request a hot reset to the device by flapping device's link
through setting the slot's link control register, as pciehp_ist() DLLSC
interrupt sequence response, pciehp will unload the device driver and
then power it off. thus cause an IOMMU device-TLB invalidation (Intel
VT-d spec, or ATS Invalidation in PCIe spec r6.1) request for non-existence
target device to be sent and deadly loop to retry that request after ITE
fault triggered in interrupt context.

That would cause following continuous hard lockup warning and system hang

[ 4211.433662] pcieport 0000:17:01.0: pciehp: Slot(108): Link Down
[ 4211.433664] pcieport 0000:17:01.0: pciehp: Slot(108): Card not present
[ 4223.822591] NMI watchdog: Watchdog detected hard LOCKUP on cpu 144
[ 4223.822622] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S
         OE    kernel version xxxx
[ 4223.822623] Hardware name: vendorname xxxx 666-106,
BIOS 01.01.02.03.01 05/15/2023
[ 4223.822623] RIP: 0010:qi_submit_sync+0x2c0/0x490
[ 4223.822624] Code: 48 be 00 00 00 00 00 08 00 00 49 85 74 24 20 0f 95 c1 48 8b
 57 10 83 c1 04 83 3c 1a 03 0f 84 a2 01 00 00 49 8b 04 24 8b 70 34 <40> f6 c6 1
0 74 17 49 8b 04 24 8b 80 80 00 00 00 89 c2 d3 fa 41 39
[ 4223.822624] RSP: 0018:ffffc4f074f0bbb8 EFLAGS: 00000093
[ 4223.822625] RAX: ffffc4f040059000 RBX: 0000000000000014 RCX: 0000000000000005
[ 4223.822625] RDX: ffff9f3841315800 RSI: 0000000000000000 RDI: ffff9f38401a8340
[ 4223.822625] RBP: ffff9f38401a8340 R08: ffffc4f074f0bc00 R09: 0000000000000000
[ 4223.822626] R10: 0000000000000010 R11: 0000000000000018 R12: ffff9f384005e200
[ 4223.822626] R13: 0000000000000004 R14: 0000000000000046 R15: 0000000000000004
[ 4223.822626] FS:  0000000000000000(0000) GS:ffffa237ae400000(0000)
knlGS:0000000000000000
[ 4223.822627] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4223.822627] CR2: 00007ffe86515d80 CR3: 000002fd3000a001 CR4: 0000000000770ee0
[ 4223.822627] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4223.822628] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 4223.822628] PKRU: 55555554
[ 4223.822628] Call Trace:
[ 4223.822628]  qi_flush_dev_iotlb+0xb1/0xd0
[ 4223.822628]  __dmar_remove_one_dev_info+0x224/0x250
[ 4223.822629]  dmar_remove_one_dev_info+0x3e/0x50
[ 4223.822629]  intel_iommu_release_device+0x1f/0x30
[ 4223.822629]  iommu_release_device+0x33/0x60
[ 4223.822629]  iommu_bus_notifier+0x7f/0x90
[ 4223.822630]  blocking_notifier_call_chain+0x60/0x90
[ 4223.822630]  device_del+0x2e5/0x420
[ 4223.822630]  pci_remove_bus_device+0x70/0x110
[ 4223.822630]  pciehp_unconfigure_device+0x7c/0x130
[ 4223.822631]  pciehp_disable_slot+0x6b/0x100
[ 4223.822631]  pciehp_handle_presence_or_link_change+0xd8/0x320
[ 4223.822631]  pciehp_ist+0x176/0x180
[ 4223.822631]  ? irq_finalize_oneshot.part.50+0x110/0x110
[ 4223.822632]  irq_thread_fn+0x19/0x50
[ 4223.822632]  irq_thread+0x104/0x190
[ 4223.822632]  ? irq_forced_thread_fn+0x90/0x90
[ 4223.822632]  ? irq_thread_check_affinity+0xe0/0xe0
[ 4223.822633]  kthread+0x114/0x130
[ 4223.822633]  ? __kthread_cancel_work+0x40/0x40
[ 4223.822633]  ret_from_fork+0x1f/0x30
[ 4223.822633] Kernel panic - not syncing: Hard LOCKUP
[ 4223.822634] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S
         OE     kernel version xxxx
[ 4223.822634] Hardware name: vendorname xxxx 666-106,
BIOS 01.01.02.03.01 05/15/2023
[ 4223.822634] Call Trace:
[ 4223.822634]  <NMI>
[ 4223.822635]  dump_stack+0x6d/0x88
[ 4223.822635]  panic+0x101/0x2d0
[ 4223.822635]  ? ret_from_fork+0x11/0x30
[ 4223.822635]  nmi_panic.cold.14+0xc/0xc
[ 4223.822636]  watchdog_overflow_callback.cold.8+0x6d/0x81
[ 4223.822636]  __perf_event_overflow+0x4f/0xf0
[ 4223.822636]  handle_pmi_common+0x1ef/0x290
[ 4223.822636]  ? __set_pte_vaddr+0x28/0x40
[ 4223.822637]  ? flush_tlb_one_kernel+0xa/0x20
[ 4223.822637]  ? __native_set_fixmap+0x24/0x30
[ 4223.822637]  ? ghes_copy_tofrom_phys+0x70/0x100
[ 4223.822637]  ? __ghes_peek_estatus.isra.16+0x49/0xa0
[ 4223.822637]  intel_pmu_handle_irq+0xba/0x2b0
[ 4223.822638]  perf_event_nmi_handler+0x24/0x40
[ 4223.822638]  nmi_handle+0x4d/0xf0
[ 4223.822638]  default_do_nmi+0x49/0x100
[ 4223.822638]  exc_nmi+0x134/0x180
[ 4223.822639]  end_repeat_nmi+0x16/0x67
[ 4223.822639] RIP: 0010:qi_submit_sync+0x2c0/0x490
[ 4223.822639] Code: 48 be 00 00 00 00 00 08 00 00 49 85 74 24 20 0f 95 c1 48 8b
 57 10 83 c1 04 83 3c 1a 03 0f 84 a2 01 00 00 49 8b 04 24 8b 70 34 <40> f6 c6 10
 74 17 49 8b 04 24 8b 80 80 00 00 00 89 c2 d3 fa 41 39
[ 4223.822640] RSP: 0018:ffffc4f074f0bbb8 EFLAGS: 00000093
[ 4223.822640] RAX: ffffc4f040059000 RBX: 0000000000000014 RCX: 0000000000000005
[ 4223.822640] RDX: ffff9f3841315800 RSI: 0000000000000000 RDI: ffff9f38401a8340
[ 4223.822641] RBP: ffff9f38401a8340 R08: ffffc4f074f0bc00 R09: 0000000000000000
[ 4223.822641] R10: 0000000000000010 R11: 0000000000000018 R12: ffff9f384005e200
[ 4223.822641] R13: 0000000000000004 R14: 0000000000000046 R15: 0000000000000004
[ 4223.822641]  ? qi_submit_sync+0x2c0/0x490
[ 4223.822642]  ? qi_submit_sync+0x2c0/0x490
[ 4223.822642]  </NMI>
[ 4223.822642]  qi_flush_dev_iotlb+0xb1/0xd0
[ 4223.822642]  __dmar_remove_one_dev_info+0x224/0x250
[ 4223.822643]  dmar_remove_one_dev_info+0x3e/0x50
[ 4223.822643]  intel_iommu_release_device+0x1f/0x30
[ 4223.822643]  iommu_release_device+0x33/0x60
[ 4223.822643]  iommu_bus_notifier+0x7f/0x90
[ 4223.822644]  blocking_notifier_call_chain+0x60/0x90
[ 4223.822644]  device_del+0x2e5/0x420
[ 4223.822644]  pci_remove_bus_device+0x70/0x110
[ 4223.822644]  pciehp_unconfigure_device+0x7c/0x130
[ 4223.822644]  pciehp_disable_slot+0x6b/0x100
[ 4223.822645]  pciehp_handle_presence_or_link_change+0xd8/0x320
[ 4223.822645]  pciehp_ist+0x176/0x180
[ 4223.822645]  ? irq_finalize_oneshot.part.50+0x110/0x110
[ 4223.822645]  irq_thread_fn+0x19/0x50
[ 4223.822646]  irq_thread+0x104/0x190
[ 4223.822646]  ? irq_forced_thread_fn+0x90/0x90
[ 4223.822646]  ? irq_thread_check_affinity+0xe0/0xe0
[ 4223.822646]  kthread+0x114/0x130
[ 4223.822647]  ? __kthread_cancel_work+0x40/0x40
[ 4223.822647]  ret_from_fork+0x1f/0x30
[ 4223.822647] Kernel Offset: 0x6400000 from 0xffffffff81000000 (relocation
range: 0xffffffff80000000-0xffffffffbfffffff)

Such issue could be triggered by all kinds of regular surprise removal
hotplug operation. like:

1. pull EP(endpoint device) out directly.
2. turn off EP's power.
3. bring the link down.
etc.

this patch aims to work for regular safe removal and surprise removal
unplug. these hot unplug handling process could be optimized for fix the
ATS Invalidation hang issue by calling pci_dev_is_disconnected() in
function devtlb_invalidation_with_pasid() to check target device state to
avoid sending meaningless ATS Invalidation request to iommu when device is
gone. (see IMPLEMENTATION NOTE in PCIe spec r6.1 section 10.3.1)

For safe removal, device wouldn't be removed until the whole software
handling process is done, it wouldn't trigger the hard lock up issue
caused by too long ATS Invalidation timeout wait. In safe removal path,
device state isn't set to pci_channel_io_perm_failure in
pciehp_unconfigure_device() by checking 'presence' parameter, calling
pci_dev_is_disconnected() in devtlb_invalidation_with_pasid() will return
false there, wouldn't break the function.

For surprise removal, device state is set to pci_channel_io_perm_failure in
pciehp_unconfigure_device(), means device is already gone (disconnected)
call pci_dev_is_disconnected() in devtlb_invalidation_with_pasid() will
return true to break the function not to send ATS Invalidation request to
the disconnected device blindly, thus avoid to trigger further ITE fault,
and ITE fault will block all invalidation request to be handled.
furthermore retry the timeout request could trigger hard lockup.

safe removal (present) & surprise removal (not present)

pciehp_ist()
   pciehp_handle_presence_or_link_change()
     pciehp_disable_slot()
       remove_board()
         pciehp_unconfigure_device(presence) {
           if (!presence)
                pci_walk_bus(parent, pci_dev_set_disconnected, NULL);
           }

this patch works for regular safe removal and surprise removal of ATS
capable endpoint on PCIe switch downstream ports.

Fixes: 6f7db75e1c46 ("iommu/vt-d: Add second level page table interface")
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Tested-by: Haorong Ye <yehaorong@bytedance.com>
Signed-off-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Link: https://lore.kernel.org/r/20240301080727.3529832-3-haifeng.zhao@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/intel/pasid.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/iommu/intel/pasid.c b/drivers/iommu/intel/pasid.c
index 9b24e8224379e..586b289cf468d 100644
--- a/drivers/iommu/intel/pasid.c
+++ b/drivers/iommu/intel/pasid.c
@@ -489,6 +489,9 @@ devtlb_invalidation_with_pasid(struct intel_iommu *iommu,
 	if (!info || !info->ats_enabled)
 		return;
 
+	if (pci_dev_is_disconnected(to_pci_dev(dev)))
+		return;
+
 	sid = info->bus << 8 | info->devfn;
 	qdep = info->ats_qdep;
 	pfsid = info->pfsid;
-- 
2.43.0

[PATCH 5.10 084/238] igb: move PEROUT and EXTTS isr logic to separate functions

[Sasha Levin]

From: Ruud Bos <kernel.hbk@gmail.com>

[ Upstream commit cf99c1dd7b7729091043374b90807c7a5f9fd9b1 ]

Remove code duplication in the tsync interrupt handler function by moving
this logic to separate functions. This keeps the interrupt handler readable
and allows the new functions to be extended for adapter types other than
i210.

Signed-off-by: Ruud Bos <kernel.hbk@gmail.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: ee14cc9ea19b ("igb: Fix missing time sync events")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 81 +++++++++++++----------
 1 file changed, 46 insertions(+), 35 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 01176c86be125..05dde67a69dd0 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -6762,12 +6762,52 @@ void igb_update_stats(struct igb_adapter *adapter)
 	}
 }
 
+static void igb_perout(struct igb_adapter *adapter, int tsintr_tt)
+{
+	int pin = ptp_find_pin(adapter->ptp_clock, PTP_PF_PEROUT, tsintr_tt);
+	struct e1000_hw *hw = &adapter->hw;
+	struct timespec64 ts;
+	u32 tsauxc;
+
+	if (pin < 0 || pin >= IGB_N_PEROUT)
+		return;
+
+	spin_lock(&adapter->tmreg_lock);
+	ts = timespec64_add(adapter->perout[pin].start,
+			    adapter->perout[pin].period);
+	/* u32 conversion of tv_sec is safe until y2106 */
+	wr32((tsintr_tt == 1) ? E1000_TRGTTIML1 : E1000_TRGTTIML0, ts.tv_nsec);
+	wr32((tsintr_tt == 1) ? E1000_TRGTTIMH1 : E1000_TRGTTIMH0, (u32)ts.tv_sec);
+	tsauxc = rd32(E1000_TSAUXC);
+	tsauxc |= TSAUXC_EN_TT0;
+	wr32(E1000_TSAUXC, tsauxc);
+	adapter->perout[pin].start = ts;
+	spin_unlock(&adapter->tmreg_lock);
+}
+
+static void igb_extts(struct igb_adapter *adapter, int tsintr_tt)
+{
+	int pin = ptp_find_pin(adapter->ptp_clock, PTP_PF_EXTTS, tsintr_tt);
+	struct e1000_hw *hw = &adapter->hw;
+	struct ptp_clock_event event;
+	u32 sec, nsec;
+
+	if (pin < 0 || pin >= IGB_N_EXTTS)
+		return;
+
+	nsec = rd32((tsintr_tt == 1) ? E1000_AUXSTMPL1 : E1000_AUXSTMPL0);
+	sec  = rd32((tsintr_tt == 1) ? E1000_AUXSTMPH1 : E1000_AUXSTMPH0);
+	event.type = PTP_CLOCK_EXTTS;
+	event.index = tsintr_tt;
+	event.timestamp = sec * 1000000000ULL + nsec;
+	ptp_clock_event(adapter->ptp_clock, &event);
+}
+
 static void igb_tsync_interrupt(struct igb_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
+	u32 ack = 0, tsicr = rd32(E1000_TSICR);
 	struct ptp_clock_event event;
-	struct timespec64 ts;
-	u32 ack = 0, tsauxc, sec, nsec, tsicr = rd32(E1000_TSICR);
 
 	if (tsicr & TSINTR_SYS_WRAP) {
 		event.type = PTP_CLOCK_PPS;
@@ -6783,51 +6823,22 @@ static void igb_tsync_interrupt(struct igb_adapter *adapter)
 	}
 
 	if (tsicr & TSINTR_TT0) {
-		spin_lock(&adapter->tmreg_lock);
-		ts = timespec64_add(adapter->perout[0].start,
-				    adapter->perout[0].period);
-		/* u32 conversion of tv_sec is safe until y2106 */
-		wr32(E1000_TRGTTIML0, ts.tv_nsec);
-		wr32(E1000_TRGTTIMH0, (u32)ts.tv_sec);
-		tsauxc = rd32(E1000_TSAUXC);
-		tsauxc |= TSAUXC_EN_TT0;
-		wr32(E1000_TSAUXC, tsauxc);
-		adapter->perout[0].start = ts;
-		spin_unlock(&adapter->tmreg_lock);
+		igb_perout(adapter, 0);
 		ack |= TSINTR_TT0;
 	}
 
 	if (tsicr & TSINTR_TT1) {
-		spin_lock(&adapter->tmreg_lock);
-		ts = timespec64_add(adapter->perout[1].start,
-				    adapter->perout[1].period);
-		wr32(E1000_TRGTTIML1, ts.tv_nsec);
-		wr32(E1000_TRGTTIMH1, (u32)ts.tv_sec);
-		tsauxc = rd32(E1000_TSAUXC);
-		tsauxc |= TSAUXC_EN_TT1;
-		wr32(E1000_TSAUXC, tsauxc);
-		adapter->perout[1].start = ts;
-		spin_unlock(&adapter->tmreg_lock);
+		igb_perout(adapter, 1);
 		ack |= TSINTR_TT1;
 	}
 
 	if (tsicr & TSINTR_AUTT0) {
-		nsec = rd32(E1000_AUXSTMPL0);
-		sec  = rd32(E1000_AUXSTMPH0);
-		event.type = PTP_CLOCK_EXTTS;
-		event.index = 0;
-		event.timestamp = sec * 1000000000ULL + nsec;
-		ptp_clock_event(adapter->ptp_clock, &event);
+		igb_extts(adapter, 0);
 		ack |= TSINTR_AUTT0;
 	}
 
 	if (tsicr & TSINTR_AUTT1) {
-		nsec = rd32(E1000_AUXSTMPL1);
-		sec  = rd32(E1000_AUXSTMPH1);
-		event.type = PTP_CLOCK_EXTTS;
-		event.index = 1;
-		event.timestamp = sec * 1000000000ULL + nsec;
-		ptp_clock_event(adapter->ptp_clock, &event);
+		igb_extts(adapter, 1);
 		ack |= TSINTR_AUTT1;
 	}
 
-- 
2.43.0

[PATCH 5.10 085/238] igb: Fix missing time sync events

[Sasha Levin]

From: Vinicius Costa Gomes <vinicius.gomes@intel.com>

[ Upstream commit ee14cc9ea19ba9678177e2224a9c58cce5937c73 ]

Fix "double" clearing of interrupts, which can cause external events
or timestamps to be missed.

The E1000_TSIRC Time Sync Interrupt Cause register can be cleared in two
ways, by either reading it or by writing '1' into the specific cause
bit. This is documented in section 8.16.1.

The following flow was used:
    1. read E1000_TSIRC into 'tsicr';
    2. handle the interrupts present into 'tsirc' and mark them in 'ack';
    3. write 'ack' into E1000_TSICR;

As both (1) and (3) will clear the interrupt cause, if the same
interrupt happens again between (1) and (3) it will be ignored,
causing events to be missed.

Remove the extra clear in (3).

Fixes: 00c65578b47b ("igb: enable internal PPS for the i210")
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 23 +++++------------------
 1 file changed, 5 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 05dde67a69dd0..0848613c3f45a 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -6806,44 +6806,31 @@ static void igb_extts(struct igb_adapter *adapter, int tsintr_tt)
 static void igb_tsync_interrupt(struct igb_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
-	u32 ack = 0, tsicr = rd32(E1000_TSICR);
+	u32 tsicr = rd32(E1000_TSICR);
 	struct ptp_clock_event event;
 
 	if (tsicr & TSINTR_SYS_WRAP) {
 		event.type = PTP_CLOCK_PPS;
 		if (adapter->ptp_caps.pps)
 			ptp_clock_event(adapter->ptp_clock, &event);
-		ack |= TSINTR_SYS_WRAP;
 	}
 
 	if (tsicr & E1000_TSICR_TXTS) {
 		/* retrieve hardware timestamp */
 		schedule_work(&adapter->ptp_tx_work);
-		ack |= E1000_TSICR_TXTS;
 	}
 
-	if (tsicr & TSINTR_TT0) {
+	if (tsicr & TSINTR_TT0)
 		igb_perout(adapter, 0);
-		ack |= TSINTR_TT0;
-	}
 
-	if (tsicr & TSINTR_TT1) {
+	if (tsicr & TSINTR_TT1)
 		igb_perout(adapter, 1);
-		ack |= TSINTR_TT1;
-	}
 
-	if (tsicr & TSINTR_AUTT0) {
+	if (tsicr & TSINTR_AUTT0)
 		igb_extts(adapter, 0);
-		ack |= TSINTR_AUTT0;
-	}
 
-	if (tsicr & TSINTR_AUTT1) {
+	if (tsicr & TSINTR_AUTT1)
 		igb_extts(adapter, 1);
-		ack |= TSINTR_AUTT1;
-	}
-
-	/* acknowledge the interrupts */
-	wr32(E1000_TSICR, ack);
 }
 
 static irqreturn_t igb_msix_other(int irq, void *data)
-- 
2.43.0

[PATCH 5.10 086/238] Bluetooth: Remove superfluous call to hci_conn_check_pending()

[Sasha Levin]

From: Jonas Dreßler <verdre@v0yd.nl>

[ Upstream commit 78e3639fc8031275010c3287ac548c0bc8de83b1 ]

The "pending connections" feature was originally introduced with commit
4c67bc74f016 ("[Bluetooth] Support concurrent connect requests") and
6bd57416127e ("[Bluetooth] Handling pending connect attempts after
inquiry") to handle controllers supporting only a single connection request
at a time. Later things were extended to also cancel ongoing inquiries on
connect() with commit 89e65975fea5 ("Bluetooth: Cancel Inquiry before
Create Connection").

With commit a9de9248064b ("[Bluetooth] Switch from OGF+OCF to using only
opcodes"), hci_conn_check_pending() was introduced as a helper to
consolidate a few places where we check for pending connections (indicated
by the BT_CONNECT2 flag) and then try to connect.

This refactoring commit also snuck in two more calls to
hci_conn_check_pending():

- One is in the failure callback of hci_cs_inquiry(), this one probably
makes sense: If we send an "HCI Inquiry" command and then immediately
after a "Create Connection" command, the "Create Connection" command might
fail before the "HCI Inquiry" command, and then we want to retry the
"Create Connection" on failure of the "HCI Inquiry".

- The other added call to hci_conn_check_pending() is in the event handler
for the "Remote Name" event, this seems unrelated and is possibly a
copy-paste error, so remove that one.

Fixes: a9de9248064b ("[Bluetooth] Switch from OGF+OCF to using only opcodes")
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_event.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 47f37080c0c55..a0d9bc99f4e14 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -2979,8 +2979,6 @@ static void hci_remote_name_evt(struct hci_dev *hdev, struct sk_buff *skb)
 
 	BT_DBG("%s", hdev->name);
 
-	hci_conn_check_pending(hdev);
-
 	hci_dev_lock(hdev);
 
 	conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
-- 
2.43.0

[PATCH 5.10 087/238] Bluetooth: hci_core: Fix possible buffer overflow

[Sasha Levin]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit 81137162bfaa7278785b24c1fd2e9e74f082e8e4 ]

struct hci_dev_info has a fixed size name[8] field so in the event that
hdev->name is bigger than that strcpy would attempt to write past its
size, so this fixes this problem by switching to use strscpy.

Fixes: dcda165706b9 ("Bluetooth: hci_core: Fix build warnings")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 5f1fbf86e0ceb..b9cf5bc9364c1 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -2175,7 +2175,7 @@ int hci_get_dev_info(void __user *arg)
 	else
 		flags = hdev->flags;
 
-	strcpy(di.name, hdev->name);
+	strscpy(di.name, hdev->name, sizeof(di.name));
 	di.bdaddr   = hdev->bdaddr;
 	di.type     = (hdev->bus & 0x0f) | ((hdev->dev_type & 0x03) << 4);
 	di.flags    = flags;
-- 
2.43.0

[PATCH 5.10 088/238] sr9800: Add check for usbnet_get_endpoints

[Sasha Levin]

From: Chen Ni <nichen@iscas.ac.cn>

[ Upstream commit 07161b2416f740a2cb87faa5566873f401440a61 ]

Add check for usbnet_get_endpoints() and return the error if it fails
in order to transfer the error.

Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 19a38d8e0aa3 ("USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support")
Link: https://lore.kernel.org/r/20240305075927.261284-1-nichen@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/sr9800.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/sr9800.c b/drivers/net/usb/sr9800.c
index 681e0def6356b..a5332e99102a5 100644
--- a/drivers/net/usb/sr9800.c
+++ b/drivers/net/usb/sr9800.c
@@ -736,7 +736,9 @@ static int sr9800_bind(struct usbnet *dev, struct usb_interface *intf)
 
 	data->eeprom_len = SR9800_EEPROM_LEN;
 
-	usbnet_get_endpoints(dev, intf);
+	ret = usbnet_get_endpoints(dev, intf);
+	if (ret)
+		goto out;
 
 	/* LED Setting Rule :
 	 * AABB:CCDD
-- 
2.43.0

[PATCH 5.10 089/238] bpf: Eliminate rlimit-based memory accounting for devmap maps

[Sasha Levin]

From: Roman Gushchin <guro@fb.com>

[ Upstream commit 844f157f6c0a905d039d2e20212ab3231f2e5eaf ]

Do not use rlimit-based memory accounting for devmap maps.
It has been replaced with the memcg-based memory accounting.

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201201215900.3569844-23-guro@fb.com
Stable-dep-of: 281d464a34f5 ("bpf: Fix DEVMAP_HASH overflow check on 32-bit arches")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/devmap.c | 18 ++----------------
 1 file changed, 2 insertions(+), 16 deletions(-)

diff --git a/kernel/bpf/devmap.c b/kernel/bpf/devmap.c
index 01149821ded91..ca2cade2871b8 100644
--- a/kernel/bpf/devmap.c
+++ b/kernel/bpf/devmap.c
@@ -109,8 +109,6 @@ static inline struct hlist_head *dev_map_index_hash(struct bpf_dtab *dtab,
 static int dev_map_init_map(struct bpf_dtab *dtab, union bpf_attr *attr)
 {
 	u32 valsize = attr->value_size;
-	u64 cost = 0;
-	int err;
 
 	/* check sanity of attributes. 2 value sizes supported:
 	 * 4 bytes: ifindex
@@ -135,21 +133,13 @@ static int dev_map_init_map(struct bpf_dtab *dtab, union bpf_attr *attr)
 
 		if (!dtab->n_buckets) /* Overflow check */
 			return -EINVAL;
-		cost += (u64) sizeof(struct hlist_head) * dtab->n_buckets;
-	} else {
-		cost += (u64) dtab->map.max_entries * sizeof(struct bpf_dtab_netdev *);
 	}
 
-	/* if map size is larger than memlock limit, reject it */
-	err = bpf_map_charge_init(&dtab->map.memory, cost);
-	if (err)
-		return -EINVAL;
-
 	if (attr->map_type == BPF_MAP_TYPE_DEVMAP_HASH) {
 		dtab->dev_index_head = dev_map_create_hash(dtab->n_buckets,
 							   dtab->map.numa_node);
 		if (!dtab->dev_index_head)
-			goto free_charge;
+			return -ENOMEM;
 
 		spin_lock_init(&dtab->index_lock);
 	} else {
@@ -157,14 +147,10 @@ static int dev_map_init_map(struct bpf_dtab *dtab, union bpf_attr *attr)
 						      sizeof(struct bpf_dtab_netdev *),
 						      dtab->map.numa_node);
 		if (!dtab->netdev_map)
-			goto free_charge;
+			return -ENOMEM;
 	}
 
 	return 0;
-
-free_charge:
-	bpf_map_charge_finish(&dtab->map.memory);
-	return -ENOMEM;
 }
 
 static struct bpf_map *dev_map_alloc(union bpf_attr *attr)
-- 
2.43.0

[PATCH 5.10 090/238] bpf: Fix DEVMAP_HASH overflow check on 32-bit arches

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 281d464a34f540de166cee74b723e97ac2515ec3 ]

The devmap code allocates a number hash buckets equal to the next power
of two of the max_entries value provided when creating the map. When
rounding up to the next power of two, the 32-bit variable storing the
number of buckets can overflow, and the code checks for overflow by
checking if the truncated 32-bit value is equal to 0. However, on 32-bit
arches the rounding up itself can overflow mid-way through, because it
ends up doing a left-shift of 32 bits on an unsigned long value. If the
size of an unsigned long is four bytes, this is undefined behaviour, so
there is no guarantee that we'll end up with a nice and tidy 0-value at
the end.

Syzbot managed to turn this into a crash on arm32 by creating a
DEVMAP_HASH with max_entries > 0x80000000 and then trying to update it.
Fix this by moving the overflow check to before the rounding up
operation.

Fixes: 6f9d451ab1a3 ("xdp: Add devmap_hash map type for looking up devices by hashed index")
Link: https://lore.kernel.org/r/000000000000ed666a0611af6818@google.com
Reported-and-tested-by: syzbot+8cd36f6b65f3cafd400a@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Message-ID: <20240307120340.99577-2-toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/devmap.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/kernel/bpf/devmap.c b/kernel/bpf/devmap.c
index ca2cade2871b8..07b5edb2c70f5 100644
--- a/kernel/bpf/devmap.c
+++ b/kernel/bpf/devmap.c
@@ -129,13 +129,14 @@ static int dev_map_init_map(struct bpf_dtab *dtab, union bpf_attr *attr)
 	bpf_map_init_from_attr(&dtab->map, attr);
 
 	if (attr->map_type == BPF_MAP_TYPE_DEVMAP_HASH) {
-		dtab->n_buckets = roundup_pow_of_two(dtab->map.max_entries);
-
-		if (!dtab->n_buckets) /* Overflow check */
+		/* hash table size must be power of 2; roundup_pow_of_two() can
+		 * overflow into UB on 32-bit arches, so check that first
+		 */
+		if (dtab->map.max_entries > 1UL << 31)
 			return -EINVAL;
-	}
 
-	if (attr->map_type == BPF_MAP_TYPE_DEVMAP_HASH) {
+		dtab->n_buckets = roundup_pow_of_two(dtab->map.max_entries);
+
 		dtab->dev_index_head = dev_map_create_hash(dtab->n_buckets,
 							   dtab->map.numa_node);
 		if (!dtab->dev_index_head)
-- 
2.43.0

[PATCH 5.10 091/238] bpf: Fix hashtab overflow check on 32-bit arches

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 6787d916c2cf9850c97a0a3f73e08c43e7d973b1 ]

The hashtab code relies on roundup_pow_of_two() to compute the number of
hash buckets, and contains an overflow check by checking if the
resulting value is 0. However, on 32-bit arches, the roundup code itself
can overflow by doing a 32-bit left-shift of an unsigned long value,
which is undefined behaviour, so it is not guaranteed to truncate
neatly. This was triggered by syzbot on the DEVMAP_HASH type, which
contains the same check, copied from the hashtab code. So apply the same
fix to hashtab, by moving the overflow check to before the roundup.

Fixes: daaf427c6ab3 ("bpf: fix arraymap NULL deref and missing overflow and zero size checks")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Message-ID: <20240307120340.99577-3-toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/hashtab.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/kernel/bpf/hashtab.c b/kernel/bpf/hashtab.c
index ec84973142725..72bc5f5752543 100644
--- a/kernel/bpf/hashtab.c
+++ b/kernel/bpf/hashtab.c
@@ -443,7 +443,13 @@ static struct bpf_map *htab_map_alloc(union bpf_attr *attr)
 							  num_possible_cpus());
 	}
 
-	/* hash table size must be power of 2 */
+	/* hash table size must be power of 2; roundup_pow_of_two() can overflow
+	 * into UB on 32-bit arches, so check that first
+	 */
+	err = -E2BIG;
+	if (htab->map.max_entries > 1UL << 31)
+		goto free_htab;
+
 	htab->n_buckets = roundup_pow_of_two(htab->map.max_entries);
 
 	htab->elem_size = sizeof(struct htab_elem) +
@@ -453,10 +459,8 @@ static struct bpf_map *htab_map_alloc(union bpf_attr *attr)
 	else
 		htab->elem_size += round_up(htab->map.value_size, 8);
 
-	err = -E2BIG;
-	/* prevent zero size kmalloc and check for u32 overflow */
-	if (htab->n_buckets == 0 ||
-	    htab->n_buckets > U32_MAX / sizeof(struct bucket))
+	/* check for u32 overflow */
+	if (htab->n_buckets > U32_MAX / sizeof(struct bucket))
 		goto free_htab;
 
 	cost = (u64) htab->n_buckets * sizeof(struct bucket) +
-- 
2.43.0

[PATCH 5.10 092/238] bpf: Fix stackmap overflow check on 32-bit arches

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 7a4b21250bf79eef26543d35bd390448646c536b ]

The stackmap code relies on roundup_pow_of_two() to compute the number
of hash buckets, and contains an overflow check by checking if the
resulting value is 0. However, on 32-bit arches, the roundup code itself
can overflow by doing a 32-bit left-shift of an unsigned long value,
which is undefined behaviour, so it is not guaranteed to truncate
neatly. This was triggered by syzbot on the DEVMAP_HASH type, which
contains the same check, copied from the hashtab code.

The commit in the fixes tag actually attempted to fix this, but the fix
did not account for the UB, so the fix only works on CPUs where an
overflow does result in a neat truncation to zero, which is not
guaranteed. Checking the value before rounding does not have this
problem.

Fixes: 6183f4d3a0a2 ("bpf: Check for integer overflow when using roundup_pow_of_two()")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-ID: <20240307120340.99577-4-toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/stackmap.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/kernel/bpf/stackmap.c b/kernel/bpf/stackmap.c
index b8afea2ceeeb1..3ec76cb5f240d 100644
--- a/kernel/bpf/stackmap.c
+++ b/kernel/bpf/stackmap.c
@@ -115,11 +115,14 @@ static struct bpf_map *stack_map_alloc(union bpf_attr *attr)
 	} else if (value_size / 8 > sysctl_perf_event_max_stack)
 		return ERR_PTR(-EINVAL);
 
-	/* hash table size must be power of 2 */
-	n_buckets = roundup_pow_of_two(attr->max_entries);
-	if (!n_buckets)
+	/* hash table size must be power of 2; roundup_pow_of_two() can overflow
+	 * into UB on 32-bit arches, so check that first
+	 */
+	if (attr->max_entries > 1UL << 31)
 		return ERR_PTR(-E2BIG);
 
+	n_buckets = roundup_pow_of_two(attr->max_entries);
+
 	cost = n_buckets * sizeof(struct stack_map_bucket *) + sizeof(*smap);
 	err = bpf_map_charge_init(&mem, cost + attr->max_entries *
 			   (sizeof(struct stack_map_bucket) + (u64)value_size));
-- 
2.43.0

[PATCH 5.10 093/238] ipv6: fib6_rules: flush route cache when rule is changed

[Sasha Levin]

From: Shiming Cheng <shiming.cheng@mediatek.com>

[ Upstream commit c4386ab4f6c600f75fdfd21143f89bac3e625d0d ]

When rule policy is changed, ipv6 socket cache is not refreshed.
The sock's skb still uses a outdated route cache and was sent to
a wrong interface.

To avoid this error we should update fib node's version when
rule is changed. Then skb's route will be reroute checked as
route cache version is already different with fib node version.
The route cache is refreshed to match the latest rule.

Fixes: 101367c2f8c4 ("[IPV6]: Policy Routing Rules")
Signed-off-by: Shiming Cheng <shiming.cheng@mediatek.com>
Signed-off-by: Lena Wang <lena.wang@mediatek.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/fib6_rules.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/ipv6/fib6_rules.c b/net/ipv6/fib6_rules.c
index 3e4c87b29b115..55cd23b7a9357 100644
--- a/net/ipv6/fib6_rules.c
+++ b/net/ipv6/fib6_rules.c
@@ -446,6 +446,11 @@ static size_t fib6_rule_nlmsg_payload(struct fib_rule *rule)
 	       + nla_total_size(16); /* src */
 }
 
+static void fib6_rule_flush_cache(struct fib_rules_ops *ops)
+{
+	rt_genid_bump_ipv6(ops->fro_net);
+}
+
 static const struct fib_rules_ops __net_initconst fib6_rules_ops_template = {
 	.family			= AF_INET6,
 	.rule_size		= sizeof(struct fib6_rule),
@@ -458,6 +463,7 @@ static const struct fib_rules_ops __net_initconst fib6_rules_ops_template = {
 	.compare		= fib6_rule_compare,
 	.fill			= fib6_rule_fill,
 	.nlmsg_payload		= fib6_rule_nlmsg_payload,
+	.flush_cache		= fib6_rule_flush_cache,
 	.nlgroup		= RTNLGRP_IPV6_RULE,
 	.policy			= fib6_rule_policy,
 	.owner			= THIS_MODULE,
-- 
2.43.0

[PATCH 5.10 094/238] net: ip_tunnel: make sure to pull inner header in ip_tunnel_rcv()

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit b0ec2abf98267f14d032102551581c833b0659d3 ]

Apply the same fix than ones found in :

8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()")
1ca1ba465e55 ("geneve: make sure to pull inner header in geneve_rx()")

We have to save skb->network_header in a temporary variable
in order to be able to recompute the network_header pointer
after a pskb_inet_may_pull() call.

pskb_inet_may_pull() makes sure the needed headers are in skb->head.

syzbot reported:
BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
 BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
 BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline]
 BUG: KMSAN: uninit-value in ip_tunnel_rcv+0xed9/0x2ed0 net/ipv4/ip_tunnel.c:409
  __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
  INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
  IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline]
  ip_tunnel_rcv+0xed9/0x2ed0 net/ipv4/ip_tunnel.c:409
  __ipgre_rcv+0x9bc/0xbc0 net/ipv4/ip_gre.c:389
  ipgre_rcv net/ipv4/ip_gre.c:411 [inline]
  gre_rcv+0x423/0x19f0 net/ipv4/ip_gre.c:447
  gre_rcv+0x2a4/0x390 net/ipv4/gre_demux.c:163
  ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205
  ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233
  NF_HOOK include/linux/netfilter.h:314 [inline]
  ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
  dst_input include/net/dst.h:461 [inline]
  ip_rcv_finish net/ipv4/ip_input.c:449 [inline]
  NF_HOOK include/linux/netfilter.h:314 [inline]
  ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569
  __netif_receive_skb_one_core net/core/dev.c:5534 [inline]
  __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648
  netif_receive_skb_internal net/core/dev.c:5734 [inline]
  netif_receive_skb+0x58/0x660 net/core/dev.c:5793
  tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1556
  tun_get_user+0x53b9/0x66e0 drivers/net/tun.c:2009
  tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2055
  call_write_iter include/linux/fs.h:2087 [inline]
  new_sync_write fs/read_write.c:497 [inline]
  vfs_write+0xb6b/0x1520 fs/read_write.c:590
  ksys_write+0x20f/0x4c0 fs/read_write.c:643
  __do_sys_write fs/read_write.c:655 [inline]
  __se_sys_write fs/read_write.c:652 [inline]
  __x64_sys_write+0x93/0xd0 fs/read_write.c:652
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
  __alloc_pages+0x9a6/0xe00 mm/page_alloc.c:4590
  alloc_pages_mpol+0x62b/0x9d0 mm/mempolicy.c:2133
  alloc_pages+0x1be/0x1e0 mm/mempolicy.c:2204
  skb_page_frag_refill+0x2bf/0x7c0 net/core/sock.c:2909
  tun_build_skb drivers/net/tun.c:1686 [inline]
  tun_get_user+0xe0a/0x66e0 drivers/net/tun.c:1826
  tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2055
  call_write_iter include/linux/fs.h:2087 [inline]
  new_sync_write fs/read_write.c:497 [inline]
  vfs_write+0xb6b/0x1520 fs/read_write.c:590
  ksys_write+0x20f/0x4c0 fs/read_write.c:643
  __do_sys_write fs/read_write.c:655 [inline]
  __se_sys_write fs/read_write.c:652 [inline]
  __x64_sys_write+0x93/0xd0 fs/read_write.c:652
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ip_tunnel.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c
index 50f8231e9daec..0953d805cbbee 100644
--- a/net/ipv4/ip_tunnel.c
+++ b/net/ipv4/ip_tunnel.c
@@ -364,7 +364,7 @@ int ip_tunnel_rcv(struct ip_tunnel *tunnel, struct sk_buff *skb,
 		  bool log_ecn_error)
 {
 	const struct iphdr *iph = ip_hdr(skb);
-	int err;
+	int nh, err;
 
 #ifdef CONFIG_NET_IPGRE_BROADCAST
 	if (ipv4_is_multicast(iph->daddr)) {
@@ -390,8 +390,21 @@ int ip_tunnel_rcv(struct ip_tunnel *tunnel, struct sk_buff *skb,
 		tunnel->i_seqno = ntohl(tpi->seq) + 1;
 	}
 
+	/* Save offset of outer header relative to skb->head,
+	 * because we are going to reset the network header to the inner header
+	 * and might change skb->head.
+	 */
+	nh = skb_network_header(skb) - skb->head;
+
 	skb_set_network_header(skb, (tunnel->dev->type == ARPHRD_ETHER) ? ETH_HLEN : 0);
 
+	if (!pskb_inet_may_pull(skb)) {
+		DEV_STATS_INC(tunnel->dev, rx_length_errors);
+		DEV_STATS_INC(tunnel->dev, rx_errors);
+		goto drop;
+	}
+	iph = (struct iphdr *)(skb->head + nh);
+
 	err = IP_ECN_decapsulate(iph, skb);
 	if (unlikely(err)) {
 		if (log_ecn_error)
-- 
2.43.0

[PATCH 5.10 095/238] net: phy: fix phy_get_internal_delay accessing an empty array

[Sasha Levin]

From: Kévin L'hôpital <kevin.lhopital@savoirfairelinux.com>

[ Upstream commit 4469c0c5b14a0919f5965c7ceac96b523eb57b79 ]

The phy_get_internal_delay function could try to access to an empty
array in the case that the driver is calling phy_get_internal_delay
without defining delay_values and rx-internal-delay-ps or
tx-internal-delay-ps is defined to 0 in the device-tree.
This will lead to "unable to handle kernel NULL pointer dereference at
virtual address 0". To avoid this kernel oops, the test should be delay
>= 0. As there is already delay < 0 test just before, the test could
only be size == 0.

Fixes: 92252eec913b ("net: phy: Add a helper to return the index for of the internal delay")
Co-developed-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Signed-off-by: Kévin L'hôpital <kevin.lhopital@savoirfairelinux.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phy_device.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 095d16ceafcf8..8654e05ddc415 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -2769,7 +2769,7 @@ s32 phy_get_internal_delay(struct phy_device *phydev, struct device *dev,
 	if (delay < 0)
 		return delay;
 
-	if (delay && size == 0)
+	if (size == 0)
 		return delay;
 
 	if (delay < delay_values[0] || delay > delay_values[size - 1]) {
-- 
2.43.0

[PATCH 5.10 096/238] net: hns3: fix port duplex configure error in IMP reset

[Sasha Levin]

From: Jie Wang <wangjie125@huawei.com>

[ Upstream commit 11d80f79dd9f871a52feba4bf24b5ac39f448eb7 ]

Currently, the mac port is fixed to configured as full dplex mode in
hclge_mac_init() when driver initialization or reset restore. Users may
change the mode to half duplex with ethtool,  so it may cause the user
configuration dropped after reset.

To fix it, don't change the duplex mode when resetting.

Fixes: 2d03eacc0b7e ("net: hns3: Only update mac configuation when necessary")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index deba485ced1bd..c14c391a0cec6 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2723,7 +2723,10 @@ static int hclge_mac_init(struct hclge_dev *hdev)
 	int ret;
 
 	hdev->support_sfp_query = true;
-	hdev->hw.mac.duplex = HCLGE_MAC_FULL;
+
+	if (!test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state))
+		hdev->hw.mac.duplex = HCLGE_MAC_FULL;
+
 	ret = hclge_cfg_mac_speed_dup_hw(hdev, hdev->hw.mac.speed,
 					 hdev->hw.mac.duplex);
 	if (ret)
-- 
2.43.0

[PATCH 5.10 097/238] net: phy: DP83822: enable rgmii mode if phy_interface_is_rgmii

[Sasha Levin]

From: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>

[ Upstream commit 621427fbdada788f18f77238e1c36f463c2cb9d1 ]

RGMII mode can be enable from dp83822 straps, and also writing bit 9
of register 0x17 - RMII and Status Register (RCSR).
When phy_interface_is_rgmii rgmii mode must be enabled, same for
contrary, this prevents malconfigurations of hw straps

References:
 - https://www.ti.com/lit/gpn/dp83822i p66

Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Suggested-by: Alberto Bianchi <alberto.bianchi@amarulasolutions.com>
Tested-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: c8a5c731fd12 ("net: phy: dp83822: Fix RGMII TX delay configuration")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/dp83822.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index 81412999445d8..dce87589b1120 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -94,7 +94,8 @@
 #define DP83822_WOL_INDICATION_SEL BIT(8)
 #define DP83822_WOL_CLR_INDICATION BIT(11)
 
-/* RSCR bits */
+/* RCSR bits */
+#define DP83822_RGMII_MODE_EN	BIT(9)
 #define DP83822_RX_CLK_SHIFT	BIT(12)
 #define DP83822_TX_CLK_SHIFT	BIT(11)
 
@@ -386,6 +387,12 @@ static int dp83822_config_init(struct phy_device *phydev)
 			if (err)
 				return err;
 		}
+
+		phy_set_bits_mmd(phydev, DP83822_DEVADDR,
+					MII_DP83822_RCSR, DP83822_RGMII_MODE_EN);
+	} else {
+		phy_clear_bits_mmd(phydev, DP83822_DEVADDR,
+					MII_DP83822_RCSR, DP83822_RGMII_MODE_EN);
 	}
 
 	if (dp83822->fx_enabled) {
-- 
2.43.0

[PATCH 5.10 098/238] net: phy: dp83822: Fix RGMII TX delay configuration

[Sasha Levin]

From: Tim Pambor <tp@osasysteme.de>

[ Upstream commit c8a5c731fd1223090af57da33838c671a7fc6a78 ]

The logic for enabling the TX clock shift is inverse of enabling the RX
clock shift. The TX clock shift is disabled when DP83822_TX_CLK_SHIFT is
set. Correct the current behavior and always write the delay configuration
to ensure consistent delay settings regardless of bootloader configuration.

Reference: https://www.ti.com/lit/ds/symlink/dp83822i.pdf p. 69

Fixes: 8095295292b5 ("net: phy: DP83822: Add setting the fixed internal delay")
Signed-off-by: Tim Pambor <tp@osasysteme.de>
Link: https://lore.kernel.org/r/20240305110608.104072-1-tp@osasysteme.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/dp83822.c | 37 ++++++++++++++++++++-----------------
 1 file changed, 20 insertions(+), 17 deletions(-)

diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index dce87589b1120..14c5e082ccc8f 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -359,7 +359,7 @@ static int dp83822_config_init(struct phy_device *phydev)
 {
 	struct dp83822_private *dp83822 = phydev->priv;
 	struct device *dev = &phydev->mdio.dev;
-	int rgmii_delay;
+	int rgmii_delay = 0;
 	s32 rx_int_delay;
 	s32 tx_int_delay;
 	int err = 0;
@@ -369,30 +369,33 @@ static int dp83822_config_init(struct phy_device *phydev)
 		rx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0,
 						      true);
 
-		if (rx_int_delay <= 0)
-			rgmii_delay = 0;
-		else
-			rgmii_delay = DP83822_RX_CLK_SHIFT;
+		/* Set DP83822_RX_CLK_SHIFT to enable rx clk internal delay */
+		if (rx_int_delay > 0)
+			rgmii_delay |= DP83822_RX_CLK_SHIFT;
 
 		tx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0,
 						      false);
+
+		/* Set DP83822_TX_CLK_SHIFT to disable tx clk internal delay */
 		if (tx_int_delay <= 0)
-			rgmii_delay &= ~DP83822_TX_CLK_SHIFT;
-		else
 			rgmii_delay |= DP83822_TX_CLK_SHIFT;
 
-		if (rgmii_delay) {
-			err = phy_set_bits_mmd(phydev, DP83822_DEVADDR,
-					       MII_DP83822_RCSR, rgmii_delay);
-			if (err)
-				return err;
-		}
+		err = phy_modify_mmd(phydev, DP83822_DEVADDR, MII_DP83822_RCSR,
+				     DP83822_RX_CLK_SHIFT | DP83822_TX_CLK_SHIFT, rgmii_delay);
+		if (err)
+			return err;
+
+		err = phy_set_bits_mmd(phydev, DP83822_DEVADDR,
+				       MII_DP83822_RCSR, DP83822_RGMII_MODE_EN);
 
-		phy_set_bits_mmd(phydev, DP83822_DEVADDR,
-					MII_DP83822_RCSR, DP83822_RGMII_MODE_EN);
+		if (err)
+			return err;
 	} else {
-		phy_clear_bits_mmd(phydev, DP83822_DEVADDR,
-					MII_DP83822_RCSR, DP83822_RGMII_MODE_EN);
+		err = phy_clear_bits_mmd(phydev, DP83822_DEVADDR,
+					 MII_DP83822_RCSR, DP83822_RGMII_MODE_EN);
+
+		if (err)
+			return err;
 	}
 
 	if (dp83822->fx_enabled) {
-- 
2.43.0

[PATCH 5.10 099/238] OPP: debugfs: Fix warning around icc_get_name()

[Sasha Levin]

From: Viresh Kumar <viresh.kumar@linaro.org>

[ Upstream commit 28330ceb953e39880ea77da4895bb902a1244860 ]

If the kernel isn't built with interconnect support, icc_get_name()
returns NULL and we get following warning:

drivers/opp/debugfs.c: In function 'bw_name_read':
drivers/opp/debugfs.c:43:42: error: '%.62s' directive argument is null [-Werror=format-overflow=]
         i = scnprintf(buf, sizeof(buf), "%.62s\n", icc_get_name(path));

Fix it.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402141313.81ltVF5g-lkp@intel.com/
Fixes: 0430b1d5704b0 ("opp: Expose bandwidth information via debugfs")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/opp/debugfs.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/opp/debugfs.c b/drivers/opp/debugfs.c
index 60f4ff8e044d1..016dea5a412be 100644
--- a/drivers/opp/debugfs.c
+++ b/drivers/opp/debugfs.c
@@ -36,10 +36,12 @@ static ssize_t bw_name_read(struct file *fp, char __user *userbuf,
 			    size_t count, loff_t *ppos)
 {
 	struct icc_path *path = fp->private_data;
+	const char *name = icc_get_name(path);
 	char buf[64];
-	int i;
+	int i = 0;
 
-	i = scnprintf(buf, sizeof(buf), "%.62s\n", icc_get_name(path));
+	if (name)
+		i = scnprintf(buf, sizeof(buf), "%.62s\n", name);
 
 	return simple_read_from_buffer(userbuf, count, ppos, buf, i);
 }
-- 
2.43.0

[PATCH 5.10 100/238] tcp: fix incorrect parameter validation in the do_tcp_getsockopt() function

[Sasha Levin]

From: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>

[ Upstream commit 716edc9706deb3bb2ff56e2eeb83559cea8f22db ]

The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.

To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index a5c15e2d193f6..2e874ec859715 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -3742,11 +3742,11 @@ static int do_tcp_getsockopt(struct sock *sk, int level,
 	if (get_user(len, optlen))
 		return -EFAULT;
 
-	len = min_t(unsigned int, len, sizeof(int));
-
 	if (len < 0)
 		return -EINVAL;
 
+	len = min_t(unsigned int, len, sizeof(int));
+
 	switch (optname) {
 	case TCP_MAXSEG:
 		val = tp->mss_cache;
-- 
2.43.0

[PATCH 5.10 101/238] net/ipv4: Replace one-element array with flexible-array member

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavoars@kernel.org>

[ Upstream commit 2d3e5caf96b9449af951e63476657acd759c1a30 ]

There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].

Use an anonymous union with a couple of anonymous structs in order to
keep userspace unchanged:

$ pahole -C ip_msfilter net/ipv4/ip_sockglue.o
struct ip_msfilter {
	union {
		struct {
			__be32     imsf_multiaddr_aux;   /*     0     4 */
			__be32     imsf_interface_aux;   /*     4     4 */
			__u32      imsf_fmode_aux;       /*     8     4 */
			__u32      imsf_numsrc_aux;      /*    12     4 */
			__be32     imsf_slist[1];        /*    16     4 */
		};                                       /*     0    20 */
		struct {
			__be32     imsf_multiaddr;       /*     0     4 */
			__be32     imsf_interface;       /*     4     4 */
			__u32      imsf_fmode;           /*     8     4 */
			__u32      imsf_numsrc;          /*    12     4 */
			__be32     imsf_slist_flex[0];   /*    16     0 */
		};                                       /*     0    16 */
	};                                               /*     0    20 */

	/* size: 20, cachelines: 1, members: 1 */
	/* last cacheline: 20 bytes */
};

Also, refactor the code accordingly and make use of the struct_size()
and flex_array_size() helpers.

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 5c3be3e0eb44 ("ipmr: fix incorrect parameter validation in the ip_mroute_getsockopt() function")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/uapi/linux/in.h | 21 ++++++++++++++++-----
 net/ipv4/igmp.c         | 12 ++++++------
 net/ipv4/ip_sockglue.c  | 15 ++++++++-------
 3 files changed, 30 insertions(+), 18 deletions(-)

diff --git a/include/uapi/linux/in.h b/include/uapi/linux/in.h
index 3960bc3da6b30..066098a5b9360 100644
--- a/include/uapi/linux/in.h
+++ b/include/uapi/linux/in.h
@@ -190,11 +190,22 @@ struct ip_mreq_source {
 };
 
 struct ip_msfilter {
-	__be32		imsf_multiaddr;
-	__be32		imsf_interface;
-	__u32		imsf_fmode;
-	__u32		imsf_numsrc;
-	__be32		imsf_slist[1];
+	union {
+		struct {
+			__be32		imsf_multiaddr_aux;
+			__be32		imsf_interface_aux;
+			__u32		imsf_fmode_aux;
+			__u32		imsf_numsrc_aux;
+			__be32		imsf_slist[1];
+		};
+		struct {
+			__be32		imsf_multiaddr;
+			__be32		imsf_interface;
+			__u32		imsf_fmode;
+			__u32		imsf_numsrc;
+			__be32		imsf_slist_flex[];
+		};
+	};
 };
 
 #define IP_MSFILTER_SIZE(numsrc) \
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index cb55fede03c04..134f1682a7e9b 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -2493,8 +2493,8 @@ int ip_mc_msfilter(struct sock *sk, struct ip_msfilter *msf, int ifindex)
 			goto done;
 		}
 		newpsl->sl_max = newpsl->sl_count = msf->imsf_numsrc;
-		memcpy(newpsl->sl_addr, msf->imsf_slist,
-			msf->imsf_numsrc * sizeof(msf->imsf_slist[0]));
+		memcpy(newpsl->sl_addr, msf->imsf_slist_flex,
+		       flex_array_size(msf, imsf_slist_flex, msf->imsf_numsrc));
 		err = ip_mc_add_src(in_dev, &msf->imsf_multiaddr,
 			msf->imsf_fmode, newpsl->sl_count, newpsl->sl_addr, 0);
 		if (err) {
@@ -2571,14 +2571,14 @@ int ip_mc_msfget(struct sock *sk, struct ip_msfilter *msf,
 		count = psl->sl_count;
 	}
 	copycount = count < msf->imsf_numsrc ? count : msf->imsf_numsrc;
-	len = copycount * sizeof(psl->sl_addr[0]);
+	len = flex_array_size(psl, sl_addr, copycount);
 	msf->imsf_numsrc = count;
-	if (put_user(IP_MSFILTER_SIZE(copycount), optlen) ||
-	    copy_to_user(optval, msf, IP_MSFILTER_SIZE(0))) {
+	if (put_user(struct_size(optval, imsf_slist_flex, copycount), optlen) ||
+	    copy_to_user(optval, msf, struct_size(optval, imsf_slist_flex, 0))) {
 		return -EFAULT;
 	}
 	if (len &&
-	    copy_to_user(&optval->imsf_slist[0], psl->sl_addr, len))
+	    copy_to_user(&optval->imsf_slist_flex[0], psl->sl_addr, len))
 		return -EFAULT;
 	return 0;
 done:
diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index 1b35afd326b8d..2cfc507712300 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -670,12 +670,11 @@ static int set_mcast_msfilter(struct sock *sk, int ifindex,
 			      struct sockaddr_storage *group,
 			      struct sockaddr_storage *list)
 {
-	int msize = IP_MSFILTER_SIZE(numsrc);
 	struct ip_msfilter *msf;
 	struct sockaddr_in *psin;
 	int err, i;
 
-	msf = kmalloc(msize, GFP_KERNEL);
+	msf = kmalloc(struct_size(msf, imsf_slist_flex, numsrc), GFP_KERNEL);
 	if (!msf)
 		return -ENOBUFS;
 
@@ -691,7 +690,7 @@ static int set_mcast_msfilter(struct sock *sk, int ifindex,
 
 		if (psin->sin_family != AF_INET)
 			goto Eaddrnotavail;
-		msf->imsf_slist[i] = psin->sin_addr.s_addr;
+		msf->imsf_slist_flex[i] = psin->sin_addr.s_addr;
 	}
 	err = ip_mc_msfilter(sk, msf, ifindex);
 	kfree(msf);
@@ -1236,7 +1235,7 @@ static int do_ip_setsockopt(struct sock *sk, int level, int optname,
 	{
 		struct ip_msfilter *msf;
 
-		if (optlen < IP_MSFILTER_SIZE(0))
+		if (optlen < struct_size(msf, imsf_slist_flex, 0))
 			goto e_inval;
 		if (optlen > READ_ONCE(sysctl_optmem_max)) {
 			err = -ENOBUFS;
@@ -1254,7 +1253,8 @@ static int do_ip_setsockopt(struct sock *sk, int level, int optname,
 			err = -ENOBUFS;
 			break;
 		}
-		if (IP_MSFILTER_SIZE(msf->imsf_numsrc) > optlen) {
+		if (struct_size(msf, imsf_slist_flex, msf->imsf_numsrc) >
+		    optlen) {
 			kfree(msf);
 			err = -EINVAL;
 			break;
@@ -1667,11 +1667,12 @@ static int do_ip_getsockopt(struct sock *sk, int level, int optname,
 	{
 		struct ip_msfilter msf;
 
-		if (len < IP_MSFILTER_SIZE(0)) {
+		if (len < struct_size(&msf, imsf_slist_flex, 0)) {
 			err = -EINVAL;
 			goto out;
 		}
-		if (copy_from_user(&msf, optval, IP_MSFILTER_SIZE(0))) {
+		if (copy_from_user(&msf, optval,
+				   struct_size(&msf, imsf_slist_flex, 0))) {
 			err = -EFAULT;
 			goto out;
 		}
-- 
2.43.0

[PATCH 5.10 102/238] net/ipv4: Revert use of struct_size() helper

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavoars@kernel.org>

[ Upstream commit 4167a960574fcadc9067f4280951a35b8c021c68 ]

Revert the use of structr_size() and stay with IP_MSFILTER_SIZE() for
now, as in this case, the size of struct ip_msfilter didn't change with
the addition of the flexible array imsf_slist_flex[]. So, if we use
struct_size() we will be allocating and calculating the size of
struct ip_msfilter with one too many items for imsf_slist_flex[].

We might use struct_size() in the future, but for now let's stay
with IP_MSFILTER_SIZE().

Fixes: 2d3e5caf96b9 ("net/ipv4: Replace one-element array with flexible-array member")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 5c3be3e0eb44 ("ipmr: fix incorrect parameter validation in the ip_mroute_getsockopt() function")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/igmp.c        |  4 ++--
 net/ipv4/ip_sockglue.c | 12 +++++-------
 2 files changed, 7 insertions(+), 9 deletions(-)

diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index 134f1682a7e9b..4ba1c92fb3524 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -2573,8 +2573,8 @@ int ip_mc_msfget(struct sock *sk, struct ip_msfilter *msf,
 	copycount = count < msf->imsf_numsrc ? count : msf->imsf_numsrc;
 	len = flex_array_size(psl, sl_addr, copycount);
 	msf->imsf_numsrc = count;
-	if (put_user(struct_size(optval, imsf_slist_flex, copycount), optlen) ||
-	    copy_to_user(optval, msf, struct_size(optval, imsf_slist_flex, 0))) {
+	if (put_user(IP_MSFILTER_SIZE(copycount), optlen) ||
+	    copy_to_user(optval, msf, IP_MSFILTER_SIZE(0))) {
 		return -EFAULT;
 	}
 	if (len &&
diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index 2cfc507712300..28b9b2e85f0be 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -674,7 +674,7 @@ static int set_mcast_msfilter(struct sock *sk, int ifindex,
 	struct sockaddr_in *psin;
 	int err, i;
 
-	msf = kmalloc(struct_size(msf, imsf_slist_flex, numsrc), GFP_KERNEL);
+	msf = kmalloc(IP_MSFILTER_SIZE(numsrc), GFP_KERNEL);
 	if (!msf)
 		return -ENOBUFS;
 
@@ -1235,7 +1235,7 @@ static int do_ip_setsockopt(struct sock *sk, int level, int optname,
 	{
 		struct ip_msfilter *msf;
 
-		if (optlen < struct_size(msf, imsf_slist_flex, 0))
+		if (optlen < IP_MSFILTER_SIZE(0))
 			goto e_inval;
 		if (optlen > READ_ONCE(sysctl_optmem_max)) {
 			err = -ENOBUFS;
@@ -1253,8 +1253,7 @@ static int do_ip_setsockopt(struct sock *sk, int level, int optname,
 			err = -ENOBUFS;
 			break;
 		}
-		if (struct_size(msf, imsf_slist_flex, msf->imsf_numsrc) >
-		    optlen) {
+		if (IP_MSFILTER_SIZE(msf->imsf_numsrc) > optlen) {
 			kfree(msf);
 			err = -EINVAL;
 			break;
@@ -1667,12 +1666,11 @@ static int do_ip_getsockopt(struct sock *sk, int level, int optname,
 	{
 		struct ip_msfilter msf;
 
-		if (len < struct_size(&msf, imsf_slist_flex, 0)) {
+		if (len < IP_MSFILTER_SIZE(0)) {
 			err = -EINVAL;
 			goto out;
 		}
-		if (copy_from_user(&msf, optval,
-				   struct_size(&msf, imsf_slist_flex, 0))) {
+		if (copy_from_user(&msf, optval, IP_MSFILTER_SIZE(0))) {
 			err = -EFAULT;
 			goto out;
 		}
-- 
2.43.0

[PATCH 5.10 103/238] net/ipv4/ipv6: Replace one-element arraya with flexible-array members

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavoars@kernel.org>

[ Upstream commit db243b796439c0caba47865564d8acd18a301d18 ]

There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].

Use an anonymous union with a couple of anonymous structs in order to
keep userspace unchanged and refactor the related code accordingly:

$ pahole -C group_filter net/ipv4/ip_sockglue.o
struct group_filter {
	union {
		struct {
			__u32      gf_interface_aux;     /*     0     4 */

			/* XXX 4 bytes hole, try to pack */

			struct __kernel_sockaddr_storage gf_group_aux; /*     8   128 */
			/* --- cacheline 2 boundary (128 bytes) was 8 bytes ago --- */
			__u32      gf_fmode_aux;         /*   136     4 */
			__u32      gf_numsrc_aux;        /*   140     4 */
			struct __kernel_sockaddr_storage gf_slist[1]; /*   144   128 */
		};                                       /*     0   272 */
		struct {
			__u32      gf_interface;         /*     0     4 */

			/* XXX 4 bytes hole, try to pack */

			struct __kernel_sockaddr_storage gf_group; /*     8   128 */
			/* --- cacheline 2 boundary (128 bytes) was 8 bytes ago --- */
			__u32      gf_fmode;             /*   136     4 */
			__u32      gf_numsrc;            /*   140     4 */
			struct __kernel_sockaddr_storage gf_slist_flex[0]; /*   144     0 */
		};                                       /*     0   144 */
	};                                               /*     0   272 */

	/* size: 272, cachelines: 5, members: 1 */
	/* last cacheline: 16 bytes */
};

$ pahole -C compat_group_filter net/ipv4/ip_sockglue.o
struct compat_group_filter {
	union {
		struct {
			__u32      gf_interface_aux;     /*     0     4 */
			struct __kernel_sockaddr_storage gf_group_aux __attribute__((__aligned__(4))); /*     4   128 */
			/* --- cacheline 2 boundary (128 bytes) was 4 bytes ago --- */
			__u32      gf_fmode_aux;         /*   132     4 */
			__u32      gf_numsrc_aux;        /*   136     4 */
			struct __kernel_sockaddr_storage gf_slist[1] __attribute__((__aligned__(4))); /*   140   128 */
		} __attribute__((__packed__)) __attribute__((__aligned__(4)));                     /*     0   268 */
		struct {
			__u32      gf_interface;         /*     0     4 */
			struct __kernel_sockaddr_storage gf_group __attribute__((__aligned__(4))); /*     4   128 */
			/* --- cacheline 2 boundary (128 bytes) was 4 bytes ago --- */
			__u32      gf_fmode;             /*   132     4 */
			__u32      gf_numsrc;            /*   136     4 */
			struct __kernel_sockaddr_storage gf_slist_flex[0] __attribute__((__aligned__(4))); /*   140     0 */
		} __attribute__((__packed__)) __attribute__((__aligned__(4)));                     /*     0   140 */
	} __attribute__((__aligned__(1)));               /*     0   268 */

	/* size: 268, cachelines: 5, members: 1 */
	/* forced alignments: 1 */
	/* last cacheline: 12 bytes */
} __attribute__((__packed__));

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 5c3be3e0eb44 ("ipmr: fix incorrect parameter validation in the ip_mroute_getsockopt() function")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/compat.h     | 27 ++++++++++++++++++++-------
 include/uapi/linux/in.h  | 21 ++++++++++++++++-----
 net/ipv4/ip_sockglue.c   | 19 ++++++++++---------
 net/ipv6/ipv6_sockglue.c | 18 +++++++++---------
 4 files changed, 55 insertions(+), 30 deletions(-)

diff --git a/include/net/compat.h b/include/net/compat.h
index 745db0d605b62..52bf5f0ee236b 100644
--- a/include/net/compat.h
+++ b/include/net/compat.h
@@ -81,13 +81,26 @@ struct compat_group_source_req {
 } __packed;
 
 struct compat_group_filter {
-	__u32				 gf_interface;
-	struct __kernel_sockaddr_storage gf_group
-		__aligned(4);
-	__u32				 gf_fmode;
-	__u32				 gf_numsrc;
-	struct __kernel_sockaddr_storage gf_slist[1]
-		__aligned(4);
+	union {
+		struct {
+			__u32				 gf_interface_aux;
+			struct __kernel_sockaddr_storage gf_group_aux
+				__aligned(4);
+			__u32				 gf_fmode_aux;
+			__u32				 gf_numsrc_aux;
+			struct __kernel_sockaddr_storage gf_slist[1]
+				__aligned(4);
+		} __packed;
+		struct {
+			__u32				 gf_interface;
+			struct __kernel_sockaddr_storage gf_group
+				__aligned(4);
+			__u32				 gf_fmode;
+			__u32				 gf_numsrc;
+			struct __kernel_sockaddr_storage gf_slist_flex[]
+				__aligned(4);
+		} __packed;
+	};
 } __packed;
 
 #endif /* NET_COMPAT_H */
diff --git a/include/uapi/linux/in.h b/include/uapi/linux/in.h
index 066098a5b9360..c4702fff64d3a 100644
--- a/include/uapi/linux/in.h
+++ b/include/uapi/linux/in.h
@@ -224,11 +224,22 @@ struct group_source_req {
 };
 
 struct group_filter {
-	__u32				 gf_interface;	/* interface index */
-	struct __kernel_sockaddr_storage gf_group;	/* multicast address */
-	__u32				 gf_fmode;	/* filter mode */
-	__u32				 gf_numsrc;	/* number of sources */
-	struct __kernel_sockaddr_storage gf_slist[1];	/* interface index */
+	union {
+		struct {
+			__u32				 gf_interface_aux; /* interface index */
+			struct __kernel_sockaddr_storage gf_group_aux;	   /* multicast address */
+			__u32				 gf_fmode_aux;	   /* filter mode */
+			__u32				 gf_numsrc_aux;	   /* number of sources */
+			struct __kernel_sockaddr_storage gf_slist[1];	   /* interface index */
+		};
+		struct {
+			__u32				 gf_interface;	  /* interface index */
+			struct __kernel_sockaddr_storage gf_group;	  /* multicast address */
+			__u32				 gf_fmode;	  /* filter mode */
+			__u32				 gf_numsrc;	  /* number of sources */
+			struct __kernel_sockaddr_storage gf_slist_flex[]; /* interface index */
+		};
+	};
 };
 
 #define GROUP_FILTER_SIZE(numsrc) \
diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index 28b9b2e85f0be..9bea014309ded 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -797,7 +797,8 @@ static int ip_set_mcast_msfilter(struct sock *sk, sockptr_t optval, int optlen)
 		goto out_free_gsf;
 
 	err = set_mcast_msfilter(sk, gsf->gf_interface, gsf->gf_numsrc,
-				 gsf->gf_fmode, &gsf->gf_group, gsf->gf_slist);
+				 gsf->gf_fmode, &gsf->gf_group,
+				 gsf->gf_slist_flex);
 out_free_gsf:
 	kfree(gsf);
 	return err;
@@ -806,7 +807,7 @@ static int ip_set_mcast_msfilter(struct sock *sk, sockptr_t optval, int optlen)
 static int compat_ip_set_mcast_msfilter(struct sock *sk, sockptr_t optval,
 		int optlen)
 {
-	const int size0 = offsetof(struct compat_group_filter, gf_slist);
+	const int size0 = offsetof(struct compat_group_filter, gf_slist_flex);
 	struct compat_group_filter *gf32;
 	unsigned int n;
 	void *p;
@@ -820,7 +821,7 @@ static int compat_ip_set_mcast_msfilter(struct sock *sk, sockptr_t optval,
 	p = kmalloc(optlen + 4, GFP_KERNEL);
 	if (!p)
 		return -ENOMEM;
-	gf32 = p + 4; /* we want ->gf_group and ->gf_slist aligned */
+	gf32 = p + 4; /* we want ->gf_group and ->gf_slist_flex aligned */
 
 	err = -EFAULT;
 	if (copy_from_sockptr(gf32, optval, optlen))
@@ -833,7 +834,7 @@ static int compat_ip_set_mcast_msfilter(struct sock *sk, sockptr_t optval,
 		goto out_free_gsf;
 
 	err = -EINVAL;
-	if (offsetof(struct compat_group_filter, gf_slist[n]) > optlen)
+	if (offsetof(struct compat_group_filter, gf_slist_flex[n]) > optlen)
 		goto out_free_gsf;
 
 	/* numsrc >= (4G-140)/128 overflow in 32 bits */
@@ -841,7 +842,7 @@ static int compat_ip_set_mcast_msfilter(struct sock *sk, sockptr_t optval,
 	if (n > READ_ONCE(sock_net(sk)->ipv4.sysctl_igmp_max_msf))
 		goto out_free_gsf;
 	err = set_mcast_msfilter(sk, gf32->gf_interface, n, gf32->gf_fmode,
-				 &gf32->gf_group, gf32->gf_slist);
+				 &gf32->gf_group, gf32->gf_slist_flex);
 out_free_gsf:
 	kfree(p);
 	return err;
@@ -1462,7 +1463,7 @@ static bool getsockopt_needs_rtnl(int optname)
 static int ip_get_mcast_msfilter(struct sock *sk, void __user *optval,
 		int __user *optlen, int len)
 {
-	const int size0 = offsetof(struct group_filter, gf_slist);
+	const int size0 = offsetof(struct group_filter, gf_slist_flex);
 	struct group_filter __user *p = optval;
 	struct group_filter gsf;
 	int num;
@@ -1474,7 +1475,7 @@ static int ip_get_mcast_msfilter(struct sock *sk, void __user *optval,
 		return -EFAULT;
 
 	num = gsf.gf_numsrc;
-	err = ip_mc_gsfget(sk, &gsf, p->gf_slist);
+	err = ip_mc_gsfget(sk, &gsf, p->gf_slist_flex);
 	if (err)
 		return err;
 	if (gsf.gf_numsrc < num)
@@ -1488,7 +1489,7 @@ static int ip_get_mcast_msfilter(struct sock *sk, void __user *optval,
 static int compat_ip_get_mcast_msfilter(struct sock *sk, void __user *optval,
 		int __user *optlen, int len)
 {
-	const int size0 = offsetof(struct compat_group_filter, gf_slist);
+	const int size0 = offsetof(struct compat_group_filter, gf_slist_flex);
 	struct compat_group_filter __user *p = optval;
 	struct compat_group_filter gf32;
 	struct group_filter gf;
@@ -1505,7 +1506,7 @@ static int compat_ip_get_mcast_msfilter(struct sock *sk, void __user *optval,
 	num = gf.gf_numsrc = gf32.gf_numsrc;
 	gf.gf_group = gf32.gf_group;
 
-	err = ip_mc_gsfget(sk, &gf, p->gf_slist);
+	err = ip_mc_gsfget(sk, &gf, p->gf_slist_flex);
 	if (err)
 		return err;
 	if (gf.gf_numsrc < num)
diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c
index 7b4b457a8b87a..0ac527cd5d56d 100644
--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -225,7 +225,7 @@ static int ipv6_set_mcast_msfilter(struct sock *sk, sockptr_t optval,
 	if (GROUP_FILTER_SIZE(gsf->gf_numsrc) > optlen)
 		goto out_free_gsf;
 
-	ret = ip6_mc_msfilter(sk, gsf, gsf->gf_slist);
+	ret = ip6_mc_msfilter(sk, gsf, gsf->gf_slist_flex);
 out_free_gsf:
 	kfree(gsf);
 	return ret;
@@ -234,7 +234,7 @@ static int ipv6_set_mcast_msfilter(struct sock *sk, sockptr_t optval,
 static int compat_ipv6_set_mcast_msfilter(struct sock *sk, sockptr_t optval,
 		int optlen)
 {
-	const int size0 = offsetof(struct compat_group_filter, gf_slist);
+	const int size0 = offsetof(struct compat_group_filter, gf_slist_flex);
 	struct compat_group_filter *gf32;
 	void *p;
 	int ret;
@@ -249,7 +249,7 @@ static int compat_ipv6_set_mcast_msfilter(struct sock *sk, sockptr_t optval,
 	if (!p)
 		return -ENOMEM;
 
-	gf32 = p + 4; /* we want ->gf_group and ->gf_slist aligned */
+	gf32 = p + 4; /* we want ->gf_group and ->gf_slist_flex aligned */
 	ret = -EFAULT;
 	if (copy_from_sockptr(gf32, optval, optlen))
 		goto out_free_p;
@@ -261,14 +261,14 @@ static int compat_ipv6_set_mcast_msfilter(struct sock *sk, sockptr_t optval,
 		goto out_free_p;
 
 	ret = -EINVAL;
-	if (offsetof(struct compat_group_filter, gf_slist[n]) > optlen)
+	if (offsetof(struct compat_group_filter, gf_slist_flex[n]) > optlen)
 		goto out_free_p;
 
 	ret = ip6_mc_msfilter(sk, &(struct group_filter){
 			.gf_interface = gf32->gf_interface,
 			.gf_group = gf32->gf_group,
 			.gf_fmode = gf32->gf_fmode,
-			.gf_numsrc = gf32->gf_numsrc}, gf32->gf_slist);
+			.gf_numsrc = gf32->gf_numsrc}, gf32->gf_slist_flex);
 
 out_free_p:
 	kfree(p);
@@ -1051,7 +1051,7 @@ static int ipv6_getsockopt_sticky(struct sock *sk, struct ipv6_txoptions *opt,
 static int ipv6_get_msfilter(struct sock *sk, void __user *optval,
 		int __user *optlen, int len)
 {
-	const int size0 = offsetof(struct group_filter, gf_slist);
+	const int size0 = offsetof(struct group_filter, gf_slist_flex);
 	struct group_filter __user *p = optval;
 	struct group_filter gsf;
 	int num;
@@ -1065,7 +1065,7 @@ static int ipv6_get_msfilter(struct sock *sk, void __user *optval,
 		return -EADDRNOTAVAIL;
 	num = gsf.gf_numsrc;
 	lock_sock(sk);
-	err = ip6_mc_msfget(sk, &gsf, p->gf_slist);
+	err = ip6_mc_msfget(sk, &gsf, p->gf_slist_flex);
 	if (!err) {
 		if (num > gsf.gf_numsrc)
 			num = gsf.gf_numsrc;
@@ -1080,7 +1080,7 @@ static int ipv6_get_msfilter(struct sock *sk, void __user *optval,
 static int compat_ipv6_get_msfilter(struct sock *sk, void __user *optval,
 		int __user *optlen)
 {
-	const int size0 = offsetof(struct compat_group_filter, gf_slist);
+	const int size0 = offsetof(struct compat_group_filter, gf_slist_flex);
 	struct compat_group_filter __user *p = optval;
 	struct compat_group_filter gf32;
 	struct group_filter gf;
@@ -1103,7 +1103,7 @@ static int compat_ipv6_get_msfilter(struct sock *sk, void __user *optval,
 		return -EADDRNOTAVAIL;
 
 	lock_sock(sk);
-	err = ip6_mc_msfget(sk, &gf, p->gf_slist);
+	err = ip6_mc_msfget(sk, &gf, p->gf_slist_flex);
 	release_sock(sk);
 	if (err)
 		return err;
-- 
2.43.0

[PATCH 5.10 104/238] bpf: net: Change do_ip_getsockopt() to take the sockptr_t argument

[Sasha Levin]

From: Martin KaFai Lau <martin.lau@kernel.org>

[ Upstream commit 728f064cd7ebea8c182e99e6f152c8b4a0a6b071 ]

Similar to the earlier patch that changes sk_getsockopt() to
take the sockptr_t argument.  This patch also changes
do_ip_getsockopt() to take the sockptr_t argument such that
a latter patch can make bpf_getsockopt(SOL_IP) to reuse
do_ip_getsockopt().

Note on the change in ip_mc_gsfget().  This function is to
return an array of sockaddr_storage in optval.  This function
is shared between ip_get_mcast_msfilter() and
compat_ip_get_mcast_msfilter().  However, the sockaddr_storage
is stored at different offset of the optval because of
the difference between group_filter and compat_group_filter.
Thus, a new 'ss_offset' argument is added to ip_mc_gsfget().

Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002828.2890585-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 5c3be3e0eb44 ("ipmr: fix incorrect parameter validation in the ip_mroute_getsockopt() function")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/igmp.h   |  4 +--
 include/linux/mroute.h |  6 ++--
 net/ipv4/igmp.c        | 22 +++++++-----
 net/ipv4/ip_sockglue.c | 80 ++++++++++++++++++++++++------------------
 net/ipv4/ipmr.c        |  9 ++---
 5 files changed, 68 insertions(+), 53 deletions(-)

diff --git a/include/linux/igmp.h b/include/linux/igmp.h
index 64ce8cd1cfaf1..4adab8ada85af 100644
--- a/include/linux/igmp.h
+++ b/include/linux/igmp.h
@@ -121,9 +121,9 @@ extern int ip_mc_source(int add, int omode, struct sock *sk,
 		struct ip_mreq_source *mreqs, int ifindex);
 extern int ip_mc_msfilter(struct sock *sk, struct ip_msfilter *msf,int ifindex);
 extern int ip_mc_msfget(struct sock *sk, struct ip_msfilter *msf,
-		struct ip_msfilter __user *optval, int __user *optlen);
+			sockptr_t optval, sockptr_t optlen);
 extern int ip_mc_gsfget(struct sock *sk, struct group_filter *gsf,
-			struct sockaddr_storage __user *p);
+			sockptr_t optval, size_t offset);
 extern int ip_mc_sf_allow(struct sock *sk, __be32 local, __be32 rmt,
 			  int dif, int sdif);
 extern void ip_mc_init_dev(struct in_device *);
diff --git a/include/linux/mroute.h b/include/linux/mroute.h
index 6cbbfe94348ce..80b8400ab8b24 100644
--- a/include/linux/mroute.h
+++ b/include/linux/mroute.h
@@ -17,7 +17,7 @@ static inline int ip_mroute_opt(int opt)
 }
 
 int ip_mroute_setsockopt(struct sock *, int, sockptr_t, unsigned int);
-int ip_mroute_getsockopt(struct sock *, int, char __user *, int __user *);
+int ip_mroute_getsockopt(struct sock *, int, sockptr_t, sockptr_t);
 int ipmr_ioctl(struct sock *sk, int cmd, void __user *arg);
 int ipmr_compat_ioctl(struct sock *sk, unsigned int cmd, void __user *arg);
 int ip_mr_init(void);
@@ -29,8 +29,8 @@ static inline int ip_mroute_setsockopt(struct sock *sock, int optname,
 	return -ENOPROTOOPT;
 }
 
-static inline int ip_mroute_getsockopt(struct sock *sock, int optname,
-				       char __user *optval, int __user *optlen)
+static inline int ip_mroute_getsockopt(struct sock *sk, int optname,
+				       sockptr_t optval, sockptr_t optlen)
 {
 	return -ENOPROTOOPT;
 }
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index 4ba1c92fb3524..f0a313747b950 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -2526,11 +2526,10 @@ int ip_mc_msfilter(struct sock *sk, struct ip_msfilter *msf, int ifindex)
 		err = ip_mc_leave_group(sk, &imr);
 	return err;
 }
-
 int ip_mc_msfget(struct sock *sk, struct ip_msfilter *msf,
-	struct ip_msfilter __user *optval, int __user *optlen)
+		 sockptr_t optval, sockptr_t optlen)
 {
-	int err, len, count, copycount;
+	int err, len, count, copycount, msf_size;
 	struct ip_mreqn	imr;
 	__be32 addr = msf->imsf_multiaddr;
 	struct ip_mc_socklist *pmc;
@@ -2573,12 +2572,15 @@ int ip_mc_msfget(struct sock *sk, struct ip_msfilter *msf,
 	copycount = count < msf->imsf_numsrc ? count : msf->imsf_numsrc;
 	len = flex_array_size(psl, sl_addr, copycount);
 	msf->imsf_numsrc = count;
-	if (put_user(IP_MSFILTER_SIZE(copycount), optlen) ||
-	    copy_to_user(optval, msf, IP_MSFILTER_SIZE(0))) {
+	msf_size = IP_MSFILTER_SIZE(copycount);
+	if (copy_to_sockptr(optlen, &msf_size, sizeof(int)) ||
+	    copy_to_sockptr(optval, msf, IP_MSFILTER_SIZE(0))) {
 		return -EFAULT;
 	}
 	if (len &&
-	    copy_to_user(&optval->imsf_slist_flex[0], psl->sl_addr, len))
+	    copy_to_sockptr_offset(optval,
+				   offsetof(struct ip_msfilter, imsf_slist_flex),
+				   psl->sl_addr, len))
 		return -EFAULT;
 	return 0;
 done:
@@ -2586,7 +2588,7 @@ int ip_mc_msfget(struct sock *sk, struct ip_msfilter *msf,
 }
 
 int ip_mc_gsfget(struct sock *sk, struct group_filter *gsf,
-	struct sockaddr_storage __user *p)
+		 sockptr_t optval, size_t ss_offset)
 {
 	int i, count, copycount;
 	struct sockaddr_in *psin;
@@ -2616,15 +2618,17 @@ int ip_mc_gsfget(struct sock *sk, struct group_filter *gsf,
 	count = psl ? psl->sl_count : 0;
 	copycount = count < gsf->gf_numsrc ? count : gsf->gf_numsrc;
 	gsf->gf_numsrc = count;
-	for (i = 0; i < copycount; i++, p++) {
+	for (i = 0; i < copycount; i++) {
 		struct sockaddr_storage ss;
 
 		psin = (struct sockaddr_in *)&ss;
 		memset(&ss, 0, sizeof(ss));
 		psin->sin_family = AF_INET;
 		psin->sin_addr.s_addr = psl->sl_addr[i];
-		if (copy_to_user(p, &ss, sizeof(ss)))
+		if (copy_to_sockptr_offset(optval, ss_offset,
+					   &ss, sizeof(ss)))
 			return -EFAULT;
+		ss_offset += sizeof(ss);
 	}
 	return 0;
 }
diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index 9bea014309ded..b300d0988d525 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -1460,37 +1460,37 @@ static bool getsockopt_needs_rtnl(int optname)
 	return false;
 }
 
-static int ip_get_mcast_msfilter(struct sock *sk, void __user *optval,
-		int __user *optlen, int len)
+static int ip_get_mcast_msfilter(struct sock *sk, sockptr_t optval,
+				 sockptr_t optlen, int len)
 {
 	const int size0 = offsetof(struct group_filter, gf_slist_flex);
-	struct group_filter __user *p = optval;
 	struct group_filter gsf;
-	int num;
+	int num, gsf_size;
 	int err;
 
 	if (len < size0)
 		return -EINVAL;
-	if (copy_from_user(&gsf, p, size0))
+	if (copy_from_sockptr(&gsf, optval, size0))
 		return -EFAULT;
 
 	num = gsf.gf_numsrc;
-	err = ip_mc_gsfget(sk, &gsf, p->gf_slist_flex);
+	err = ip_mc_gsfget(sk, &gsf, optval,
+			   offsetof(struct group_filter, gf_slist_flex));
 	if (err)
 		return err;
 	if (gsf.gf_numsrc < num)
 		num = gsf.gf_numsrc;
-	if (put_user(GROUP_FILTER_SIZE(num), optlen) ||
-	    copy_to_user(p, &gsf, size0))
+	gsf_size = GROUP_FILTER_SIZE(num);
+	if (copy_to_sockptr(optlen, &gsf_size, sizeof(int)) ||
+	    copy_to_sockptr(optval, &gsf, size0))
 		return -EFAULT;
 	return 0;
 }
 
-static int compat_ip_get_mcast_msfilter(struct sock *sk, void __user *optval,
-		int __user *optlen, int len)
+static int compat_ip_get_mcast_msfilter(struct sock *sk, sockptr_t optval,
+					sockptr_t optlen, int len)
 {
 	const int size0 = offsetof(struct compat_group_filter, gf_slist_flex);
-	struct compat_group_filter __user *p = optval;
 	struct compat_group_filter gf32;
 	struct group_filter gf;
 	int num;
@@ -1498,7 +1498,7 @@ static int compat_ip_get_mcast_msfilter(struct sock *sk, void __user *optval,
 
 	if (len < size0)
 		return -EINVAL;
-	if (copy_from_user(&gf32, p, size0))
+	if (copy_from_sockptr(&gf32, optval, size0))
 		return -EFAULT;
 
 	gf.gf_interface = gf32.gf_interface;
@@ -1506,21 +1506,24 @@ static int compat_ip_get_mcast_msfilter(struct sock *sk, void __user *optval,
 	num = gf.gf_numsrc = gf32.gf_numsrc;
 	gf.gf_group = gf32.gf_group;
 
-	err = ip_mc_gsfget(sk, &gf, p->gf_slist_flex);
+	err = ip_mc_gsfget(sk, &gf, optval,
+			   offsetof(struct compat_group_filter, gf_slist_flex));
 	if (err)
 		return err;
 	if (gf.gf_numsrc < num)
 		num = gf.gf_numsrc;
 	len = GROUP_FILTER_SIZE(num) - (sizeof(gf) - sizeof(gf32));
-	if (put_user(len, optlen) ||
-	    put_user(gf.gf_fmode, &p->gf_fmode) ||
-	    put_user(gf.gf_numsrc, &p->gf_numsrc))
+	if (copy_to_sockptr(optlen, &len, sizeof(int)) ||
+	    copy_to_sockptr_offset(optval, offsetof(struct compat_group_filter, gf_fmode),
+				   &gf.gf_fmode, sizeof(gf.gf_fmode)) ||
+	    copy_to_sockptr_offset(optval, offsetof(struct compat_group_filter, gf_numsrc),
+				   &gf.gf_numsrc, sizeof(gf.gf_numsrc)))
 		return -EFAULT;
 	return 0;
 }
 
 static int do_ip_getsockopt(struct sock *sk, int level, int optname,
-			    char __user *optval, int __user *optlen)
+			    sockptr_t optval, sockptr_t optlen)
 {
 	struct inet_sock *inet = inet_sk(sk);
 	bool needs_rtnl = getsockopt_needs_rtnl(optname);
@@ -1533,7 +1536,7 @@ static int do_ip_getsockopt(struct sock *sk, int level, int optname,
 	if (ip_mroute_opt(optname))
 		return ip_mroute_getsockopt(sk, optname, optval, optlen);
 
-	if (get_user(len, optlen))
+	if (copy_from_sockptr(&len, optlen, sizeof(int)))
 		return -EFAULT;
 	if (len < 0)
 		return -EINVAL;
@@ -1558,15 +1561,17 @@ static int do_ip_getsockopt(struct sock *sk, int level, int optname,
 			       inet_opt->opt.optlen);
 		release_sock(sk);
 
-		if (opt->optlen == 0)
-			return put_user(0, optlen);
+		if (opt->optlen == 0) {
+			len = 0;
+			return copy_to_sockptr(optlen, &len, sizeof(int));
+		}
 
 		ip_options_undo(opt);
 
 		len = min_t(unsigned int, len, opt->optlen);
-		if (put_user(len, optlen))
+		if (copy_to_sockptr(optlen, &len, sizeof(int)))
 			return -EFAULT;
-		if (copy_to_user(optval, opt->__data, len))
+		if (copy_to_sockptr(optval, opt->__data, len))
 			return -EFAULT;
 		return 0;
 	}
@@ -1657,9 +1662,9 @@ static int do_ip_getsockopt(struct sock *sk, int level, int optname,
 		addr.s_addr = inet->mc_addr;
 		release_sock(sk);
 
-		if (put_user(len, optlen))
+		if (copy_to_sockptr(optlen, &len, sizeof(int)))
 			return -EFAULT;
-		if (copy_to_user(optval, &addr, len))
+		if (copy_to_sockptr(optval, &addr, len))
 			return -EFAULT;
 		return 0;
 	}
@@ -1671,12 +1676,11 @@ static int do_ip_getsockopt(struct sock *sk, int level, int optname,
 			err = -EINVAL;
 			goto out;
 		}
-		if (copy_from_user(&msf, optval, IP_MSFILTER_SIZE(0))) {
+		if (copy_from_sockptr(&msf, optval, IP_MSFILTER_SIZE(0))) {
 			err = -EFAULT;
 			goto out;
 		}
-		err = ip_mc_msfget(sk, &msf,
-				   (struct ip_msfilter __user *)optval, optlen);
+		err = ip_mc_msfget(sk, &msf, optval, optlen);
 		goto out;
 	}
 	case MCAST_MSFILTER:
@@ -1698,8 +1702,13 @@ static int do_ip_getsockopt(struct sock *sk, int level, int optname,
 		if (sk->sk_type != SOCK_STREAM)
 			return -ENOPROTOOPT;
 
-		msg.msg_control_is_user = true;
-		msg.msg_control_user = optval;
+		if (optval.is_kernel) {
+			msg.msg_control_is_user = false;
+			msg.msg_control = optval.kernel;
+		} else {
+			msg.msg_control_is_user = true;
+			msg.msg_control_user = optval.user;
+		}
 		msg.msg_controllen = len;
 		msg.msg_flags = in_compat_syscall() ? MSG_CMSG_COMPAT : 0;
 
@@ -1720,7 +1729,7 @@ static int do_ip_getsockopt(struct sock *sk, int level, int optname,
 			put_cmsg(&msg, SOL_IP, IP_TOS, sizeof(tos), &tos);
 		}
 		len -= msg.msg_controllen;
-		return put_user(len, optlen);
+		return copy_to_sockptr(optlen, &len, sizeof(int));
 	}
 	case IP_FREEBIND:
 		val = inet->freebind;
@@ -1743,15 +1752,15 @@ static int do_ip_getsockopt(struct sock *sk, int level, int optname,
 	if (len < sizeof(int) && len > 0 && val >= 0 && val <= 255) {
 		unsigned char ucval = (unsigned char)val;
 		len = 1;
-		if (put_user(len, optlen))
+		if (copy_to_sockptr(optlen, &len, sizeof(int)))
 			return -EFAULT;
-		if (copy_to_user(optval, &ucval, 1))
+		if (copy_to_sockptr(optval, &ucval, 1))
 			return -EFAULT;
 	} else {
 		len = min_t(unsigned int, sizeof(int), len);
-		if (put_user(len, optlen))
+		if (copy_to_sockptr(optlen, &len, sizeof(int)))
 			return -EFAULT;
-		if (copy_to_user(optval, &val, len))
+		if (copy_to_sockptr(optval, &val, len))
 			return -EFAULT;
 	}
 	return 0;
@@ -1768,7 +1777,8 @@ int ip_getsockopt(struct sock *sk, int level,
 {
 	int err;
 
-	err = do_ip_getsockopt(sk, level, optname, optval, optlen);
+	err = do_ip_getsockopt(sk, level, optname,
+			       USER_SOCKPTR(optval), USER_SOCKPTR(optlen));
 
 #if IS_ENABLED(CONFIG_BPFILTER_UMH)
 	if (optname >= BPFILTER_IPT_SO_GET_INFO &&
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index be1976536f1c0..cdc0a1781fd28 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -1540,7 +1540,8 @@ int ip_mroute_setsockopt(struct sock *sk, int optname, sockptr_t optval,
 }
 
 /* Getsock opt support for the multicast routing system. */
-int ip_mroute_getsockopt(struct sock *sk, int optname, char __user *optval, int __user *optlen)
+int ip_mroute_getsockopt(struct sock *sk, int optname, sockptr_t optval,
+			 sockptr_t optlen)
 {
 	int olr;
 	int val;
@@ -1571,14 +1572,14 @@ int ip_mroute_getsockopt(struct sock *sk, int optname, char __user *optval, int
 		return -ENOPROTOOPT;
 	}
 
-	if (get_user(olr, optlen))
+	if (copy_from_sockptr(&olr, optlen, sizeof(int)))
 		return -EFAULT;
 	olr = min_t(unsigned int, olr, sizeof(int));
 	if (olr < 0)
 		return -EINVAL;
-	if (put_user(olr, optlen))
+	if (copy_to_sockptr(optlen, &olr, sizeof(int)))
 		return -EFAULT;
-	if (copy_to_user(optval, &val, olr))
+	if (copy_to_sockptr(optval, &val, olr))
 		return -EFAULT;
 	return 0;
 }
-- 
2.43.0

[PATCH 5.10 105/238] ipmr: fix incorrect parameter validation in the ip_mroute_getsockopt() function

[Sasha Levin]

From: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>

[ Upstream commit 5c3be3e0eb44b7f978bb6cbb20ad956adb93f736 ]

The 'olr' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.

To fix the logic, check 'olr' as read from 'optlen',
where the types of relevant variables are (signed) int.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ipmr.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index cdc0a1781fd28..db184cb826b95 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -1574,9 +1574,11 @@ int ip_mroute_getsockopt(struct sock *sk, int optname, sockptr_t optval,
 
 	if (copy_from_sockptr(&olr, optlen, sizeof(int)))
 		return -EFAULT;
-	olr = min_t(unsigned int, olr, sizeof(int));
 	if (olr < 0)
 		return -EINVAL;
+
+	olr = min_t(unsigned int, olr, sizeof(int));
+
 	if (copy_to_sockptr(optlen, &olr, sizeof(int)))
 		return -EFAULT;
 	if (copy_to_sockptr(optval, &val, olr))
-- 
2.43.0

[PATCH 5.10 106/238] l2tp: fix incorrect parameter validation in the pppol2tp_getsockopt() function

[Sasha Levin]

From: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>

[ Upstream commit 955e9876ba4ee26eeaab1b13517f5b2c88e73d55 ]

The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.

To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.

Fixes: 3557baabf280 ("[L2TP]: PPP over L2TP driver core")
Reviewed-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/l2tp/l2tp_ppp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c
index 5ecc0f2009444..b1d89c850f686 100644
--- a/net/l2tp/l2tp_ppp.c
+++ b/net/l2tp/l2tp_ppp.c
@@ -1357,11 +1357,11 @@ static int pppol2tp_getsockopt(struct socket *sock, int level, int optname,
 	if (get_user(len, optlen))
 		return -EFAULT;
 
-	len = min_t(unsigned int, len, sizeof(int));
-
 	if (len < 0)
 		return -EINVAL;
 
+	len = min_t(unsigned int, len, sizeof(int));
+
 	err = -ENOTCONN;
 	if (!sk->sk_user_data)
 		goto end;
-- 
2.43.0

[PATCH 5.10 107/238] udp: fix incorrect parameter validation in the udp_lib_getsockopt() function

[Sasha Levin]

From: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>

[ Upstream commit 4bb3ba7b74fceec6f558745b25a43c6521cf5506 ]

The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.

To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/udp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 476f79f1563a8..b2541c7d7c87f 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -2748,11 +2748,11 @@ int udp_lib_getsockopt(struct sock *sk, int level, int optname,
 	if (get_user(len, optlen))
 		return -EFAULT;
 
-	len = min_t(unsigned int, len, sizeof(int));
-
 	if (len < 0)
 		return -EINVAL;
 
+	len = min_t(unsigned int, len, sizeof(int));
+
 	switch (optname) {
 	case UDP_CORK:
 		val = READ_ONCE(up->corkflag);
-- 
2.43.0

[PATCH 5.10 108/238] net: kcm: fix incorrect parameter validation in the kcm_getsockopt) function

[Sasha Levin]

From: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>

[ Upstream commit 3ed5f415133f9b7518fbe55ba9ae9a3f5e700929 ]

The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.

To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.

Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/kcm/kcmsock.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/kcm/kcmsock.c b/net/kcm/kcmsock.c
index 39b3c7fbf9f66..7420b4f19b45e 100644
--- a/net/kcm/kcmsock.c
+++ b/net/kcm/kcmsock.c
@@ -1275,10 +1275,11 @@ static int kcm_getsockopt(struct socket *sock, int level, int optname,
 	if (get_user(len, optlen))
 		return -EFAULT;
 
-	len = min_t(unsigned int, len, sizeof(int));
 	if (len < 0)
 		return -EINVAL;
 
+	len = min_t(unsigned int, len, sizeof(int));
+
 	switch (optname) {
 	case KCM_RECV_DISABLE:
 		val = kcm->rx_disabled;
-- 
2.43.0

[PATCH 5.10 109/238] net/x25: fix incorrect parameter validation in the x25_getsockopt() function

[Sasha Levin]

From: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>

[ Upstream commit d6eb8de2015f0c24822e47356f839167ebde2945 ]

The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.

To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/x25/af_x25.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index 161dc194e6342..a7ecf2956cdd6 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -470,12 +470,12 @@ static int x25_getsockopt(struct socket *sock, int level, int optname,
 	if (get_user(len, optlen))
 		goto out;
 
-	len = min_t(unsigned int, len, sizeof(int));
-
 	rc = -EINVAL;
 	if (len < 0)
 		goto out;
 
+	len = min_t(unsigned int, len, sizeof(int));
+
 	rc = -EFAULT;
 	if (put_user(len, optlen))
 		goto out;
-- 
2.43.0

[PATCH 5.10 110/238] nfp: flower: handle acti_netdevs allocation failure

[Sasha Levin]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit 84e95149bd341705f0eca6a7fcb955c548805002 ]

The kmalloc_array() in nfp_fl_lag_do_work() will return null, if
the physical memory has run out. As a result, if we dereference
the acti_netdevs, the null pointer dereference bugs will happen.

This patch adds a check to judge whether allocation failure occurs.
If it happens, the delayed work will be rescheduled and try again.

Fixes: bb9a8d031140 ("nfp: flower: monitor and offload LAG groups")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20240308142540.9674-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/netronome/nfp/flower/lag_conf.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/netronome/nfp/flower/lag_conf.c b/drivers/net/ethernet/netronome/nfp/flower/lag_conf.c
index 63907aeb3884e..3167f9675ae0f 100644
--- a/drivers/net/ethernet/netronome/nfp/flower/lag_conf.c
+++ b/drivers/net/ethernet/netronome/nfp/flower/lag_conf.c
@@ -308,6 +308,11 @@ static void nfp_fl_lag_do_work(struct work_struct *work)
 
 		acti_netdevs = kmalloc_array(entry->slave_cnt,
 					     sizeof(*acti_netdevs), GFP_KERNEL);
+		if (!acti_netdevs) {
+			schedule_delayed_work(&lag->work,
+					      NFP_FL_LAG_DELAY);
+			continue;
+		}
 
 		/* Include sanity check in the loop. It may be that a bond has
 		 * changed between processing the last notification and the
-- 
2.43.0

[PATCH 5.10 111/238] dm raid: fix false positive for requeue needed during reshape

[Sasha Levin]

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit b25b8f4b8ecef0f48c05f0c3572daeabefe16526 ]

An empty flush doesn't have a payload, so it should never be looked at
when considering to possibly requeue a bio for the case when a reshape
is in progress.

Fixes: 9dbd1aa3a81c ("dm raid: add reshaping support to the target")
Reported-by: Patrick Plenefisch <simonpatp@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-raid.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index 140bdf2a6ee11..e523ecdf947f4 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -3329,14 +3329,14 @@ static int raid_map(struct dm_target *ti, struct bio *bio)
 	struct mddev *mddev = &rs->md;
 
 	/*
-	 * If we're reshaping to add disk(s)), ti->len and
+	 * If we're reshaping to add disk(s), ti->len and
 	 * mddev->array_sectors will differ during the process
 	 * (ti->len > mddev->array_sectors), so we have to requeue
 	 * bios with addresses > mddev->array_sectors here or
 	 * there will occur accesses past EOD of the component
 	 * data images thus erroring the raid set.
 	 */
-	if (unlikely(bio_end_sector(bio) > mddev->array_sectors))
+	if (unlikely(bio_has_data(bio) && bio_end_sector(bio) > mddev->array_sectors))
 		return DM_MAPIO_REQUEUE;
 
 	md_handle_request(mddev, bio);
-- 
2.43.0

[PATCH 5.10 112/238] dm: call the resume method on internal suspend

[Sasha Levin]

From: Mikulas Patocka <mpatocka@redhat.com>

[ Upstream commit 65e8fbde64520001abf1c8d0e573561b4746ef38 ]

There is this reported crash when experimenting with the lvm2 testsuite.
The list corruption is caused by the fact that the postsuspend and resume
methods were not paired correctly; there were two consecutive calls to the
origin_postsuspend function. The second call attempts to remove the
"hash_list" entry from a list, while it was already removed by the first
call.

Fix __dm_internal_resume so that it calls the preresume and resume
methods of the table's targets.

If a preresume method of some target fails, we are in a tricky situation.
We can't return an error because dm_internal_resume isn't supposed to
return errors. We can't return success, because then the "resume" and
"postsuspend" methods would not be paired correctly. So, we set the
DMF_SUSPENDED flag and we fake normal suspend - it may confuse userspace
tools, but it won't cause a kernel crash.

------------[ cut here ]------------
kernel BUG at lib/list_debug.c:56!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 8343 Comm: dmsetup Not tainted 6.8.0-rc6 #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
RIP: 0010:__list_del_entry_valid_or_report+0x77/0xc0
<snip>
RSP: 0018:ffff8881b831bcc0 EFLAGS: 00010282
RAX: 000000000000004e RBX: ffff888143b6eb80 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffffff819053d0 RDI: 00000000ffffffff
RBP: ffff8881b83a3400 R08: 00000000fffeffff R09: 0000000000000058
R10: 0000000000000000 R11: ffffffff81a24080 R12: 0000000000000001
R13: ffff88814538e000 R14: ffff888143bc6dc0 R15: ffffffffa02e4bb0
FS:  00000000f7c0f780(0000) GS:ffff8893f0a40000(0000) knlGS:0000000000000000
CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 0000000057fb5000 CR3: 0000000143474000 CR4: 00000000000006b0
Call Trace:
 <TASK>
 ? die+0x2d/0x80
 ? do_trap+0xeb/0xf0
 ? __list_del_entry_valid_or_report+0x77/0xc0
 ? do_error_trap+0x60/0x80
 ? __list_del_entry_valid_or_report+0x77/0xc0
 ? exc_invalid_op+0x49/0x60
 ? __list_del_entry_valid_or_report+0x77/0xc0
 ? asm_exc_invalid_op+0x16/0x20
 ? table_deps+0x1b0/0x1b0 [dm_mod]
 ? __list_del_entry_valid_or_report+0x77/0xc0
 origin_postsuspend+0x1a/0x50 [dm_snapshot]
 dm_table_postsuspend_targets+0x34/0x50 [dm_mod]
 dm_suspend+0xd8/0xf0 [dm_mod]
 dev_suspend+0x1f2/0x2f0 [dm_mod]
 ? table_deps+0x1b0/0x1b0 [dm_mod]
 ctl_ioctl+0x300/0x5f0 [dm_mod]
 dm_compat_ctl_ioctl+0x7/0x10 [dm_mod]
 __x64_compat_sys_ioctl+0x104/0x170
 do_syscall_64+0x184/0x1b0
 entry_SYSCALL_64_after_hwframe+0x46/0x4e
RIP: 0033:0xf7e6aead
<snip>
---[ end trace 0000000000000000 ]---

Fixes: ffcc39364160 ("dm: enhance internal suspend and resume interface")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm.c | 26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 9029c1004b933..dc8498b4b5c13 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -2733,6 +2733,9 @@ static void __dm_internal_suspend(struct mapped_device *md, unsigned suspend_fla
 
 static void __dm_internal_resume(struct mapped_device *md)
 {
+	int r;
+	struct dm_table *map;
+
 	BUG_ON(!md->internal_suspend_count);
 
 	if (--md->internal_suspend_count)
@@ -2741,12 +2744,23 @@ static void __dm_internal_resume(struct mapped_device *md)
 	if (dm_suspended_md(md))
 		goto done; /* resume from nested suspend */
 
-	/*
-	 * NOTE: existing callers don't need to call dm_table_resume_targets
-	 * (which may fail -- so best to avoid it for now by passing NULL map)
-	 */
-	(void) __dm_resume(md, NULL);
-
+	map = rcu_dereference_protected(md->map, lockdep_is_held(&md->suspend_lock));
+	r = __dm_resume(md, map);
+	if (r) {
+		/*
+		 * If a preresume method of some target failed, we are in a
+		 * tricky situation. We can't return an error to the caller. We
+		 * can't fake success because then the "resume" and
+		 * "postsuspend" methods would not be paired correctly, and it
+		 * would break various targets, for example it would cause list
+		 * corruption in the "origin" target.
+		 *
+		 * So, we fake normal suspend here, to make sure that the
+		 * "resume" and "postsuspend" methods will be paired correctly.
+		 */
+		DMERR("Preresume method failed: %d", r);
+		set_bit(DMF_SUSPENDED, &md->flags);
+	}
 done:
 	clear_bit(DMF_SUSPENDED_INTERNALLY, &md->flags);
 	smp_mb__after_atomic();
-- 
2.43.0

[PATCH 5.10 113/238] drm/tegra: dsi: Add missing check for of_find_device_by_node

[Sasha Levin]

From: Chen Ni <nichen@iscas.ac.cn>

[ Upstream commit afe6fcb9775882230cd29b529203eabd5d2a638d ]

Add check for the return value of of_find_device_by_node() and return
the error if it fails in order to avoid NULL pointer dereference.

Fixes: e94236cde4d5 ("drm/tegra: dsi: Add ganged mode support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024080738.825553-1-nichen@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/dsi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tegra/dsi.c b/drivers/gpu/drm/tegra/dsi.c
index de1333dc0d867..0adce882f157b 100644
--- a/drivers/gpu/drm/tegra/dsi.c
+++ b/drivers/gpu/drm/tegra/dsi.c
@@ -1534,9 +1534,11 @@ static int tegra_dsi_ganged_probe(struct tegra_dsi *dsi)
 	np = of_parse_phandle(dsi->dev->of_node, "nvidia,ganged-mode", 0);
 	if (np) {
 		struct platform_device *gangster = of_find_device_by_node(np);
+		of_node_put(np);
+		if (!gangster)
+			return -EPROBE_DEFER;
 
 		dsi->slave = platform_get_drvdata(gangster);
-		of_node_put(np);
 
 		if (!dsi->slave) {
 			put_device(&gangster->dev);
-- 
2.43.0

[PATCH 5.10 114/238] drm/tegra: dsi: Make use of the helper function dev_err_probe()

[Sasha Levin]

From: Cai Huoqing <caihuoqing@baidu.com>

[ Upstream commit fc75e4fcbd1e4252a0481ebb23cd4516c127a8e2 ]

When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Stable-dep-of: 830c1ded3563 ("drm/tegra: dsi: Fix some error handling paths in tegra_dsi_probe()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/dsi.c | 28 ++++++++++++----------------
 1 file changed, 12 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/tegra/dsi.c b/drivers/gpu/drm/tegra/dsi.c
index 0adce882f157b..6cbba2adb6e5a 100644
--- a/drivers/gpu/drm/tegra/dsi.c
+++ b/drivers/gpu/drm/tegra/dsi.c
@@ -1591,28 +1591,24 @@ static int tegra_dsi_probe(struct platform_device *pdev)
 	}
 
 	dsi->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(dsi->clk)) {
-		dev_err(&pdev->dev, "cannot get DSI clock\n");
-		return PTR_ERR(dsi->clk);
-	}
+	if (IS_ERR(dsi->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk),
+				     "cannot get DSI clock\n");
 
 	dsi->clk_lp = devm_clk_get(&pdev->dev, "lp");
-	if (IS_ERR(dsi->clk_lp)) {
-		dev_err(&pdev->dev, "cannot get low-power clock\n");
-		return PTR_ERR(dsi->clk_lp);
-	}
+	if (IS_ERR(dsi->clk_lp))
+		return dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk_lp),
+				     "cannot get low-power clock\n");
 
 	dsi->clk_parent = devm_clk_get(&pdev->dev, "parent");
-	if (IS_ERR(dsi->clk_parent)) {
-		dev_err(&pdev->dev, "cannot get parent clock\n");
-		return PTR_ERR(dsi->clk_parent);
-	}
+	if (IS_ERR(dsi->clk_parent))
+		return dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk_parent),
+				     "cannot get parent clock\n");
 
 	dsi->vdd = devm_regulator_get(&pdev->dev, "avdd-dsi-csi");
-	if (IS_ERR(dsi->vdd)) {
-		dev_err(&pdev->dev, "cannot get VDD supply\n");
-		return PTR_ERR(dsi->vdd);
-	}
+	if (IS_ERR(dsi->vdd))
+		return dev_err_probe(&pdev->dev, PTR_ERR(dsi->vdd),
+				     "cannot get VDD supply\n");
 
 	err = tegra_dsi_setup_clocks(dsi);
 	if (err < 0) {
-- 
2.43.0

[PATCH 5.10 115/238] drm/tegra: dsi: Fix some error handling paths in tegra_dsi_probe()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 830c1ded356369cd1303e8bb87ce3fea6e744de8 ]

If an error occurs after calling tegra_output_probe(),
tegra_output_remove() should be called as already done in the remove
function.

Fixes: dec727399a4b ("drm/tegra: Add DSI support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/16820073278d031f6c474a08d5f22a255158585e.1693667005.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/dsi.c | 54 ++++++++++++++++++++++++-------------
 1 file changed, 35 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/tegra/dsi.c b/drivers/gpu/drm/tegra/dsi.c
index 6cbba2adb6e5a..815e32e05f600 100644
--- a/drivers/gpu/drm/tegra/dsi.c
+++ b/drivers/gpu/drm/tegra/dsi.c
@@ -1586,44 +1586,58 @@ static int tegra_dsi_probe(struct platform_device *pdev)
 
 	if (!pdev->dev.pm_domain) {
 		dsi->rst = devm_reset_control_get(&pdev->dev, "dsi");
-		if (IS_ERR(dsi->rst))
-			return PTR_ERR(dsi->rst);
+		if (IS_ERR(dsi->rst)) {
+			err = PTR_ERR(dsi->rst);
+			goto remove;
+		}
 	}
 
 	dsi->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(dsi->clk))
-		return dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk),
-				     "cannot get DSI clock\n");
+	if (IS_ERR(dsi->clk)) {
+		err = dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk),
+				    "cannot get DSI clock\n");
+		goto remove;
+	}
 
 	dsi->clk_lp = devm_clk_get(&pdev->dev, "lp");
-	if (IS_ERR(dsi->clk_lp))
-		return dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk_lp),
-				     "cannot get low-power clock\n");
+	if (IS_ERR(dsi->clk_lp)) {
+		err = dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk_lp),
+				    "cannot get low-power clock\n");
+		goto remove;
+	}
 
 	dsi->clk_parent = devm_clk_get(&pdev->dev, "parent");
-	if (IS_ERR(dsi->clk_parent))
-		return dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk_parent),
-				     "cannot get parent clock\n");
+	if (IS_ERR(dsi->clk_parent)) {
+		err = dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk_parent),
+				    "cannot get parent clock\n");
+		goto remove;
+	}
 
 	dsi->vdd = devm_regulator_get(&pdev->dev, "avdd-dsi-csi");
-	if (IS_ERR(dsi->vdd))
-		return dev_err_probe(&pdev->dev, PTR_ERR(dsi->vdd),
-				     "cannot get VDD supply\n");
+	if (IS_ERR(dsi->vdd)) {
+		err = dev_err_probe(&pdev->dev, PTR_ERR(dsi->vdd),
+				    "cannot get VDD supply\n");
+		goto remove;
+	}
 
 	err = tegra_dsi_setup_clocks(dsi);
 	if (err < 0) {
 		dev_err(&pdev->dev, "cannot setup clocks\n");
-		return err;
+		goto remove;
 	}
 
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dsi->regs = devm_ioremap_resource(&pdev->dev, regs);
-	if (IS_ERR(dsi->regs))
-		return PTR_ERR(dsi->regs);
+	if (IS_ERR(dsi->regs)) {
+		err = PTR_ERR(dsi->regs);
+		goto remove;
+	}
 
 	dsi->mipi = tegra_mipi_request(&pdev->dev, pdev->dev.of_node);
-	if (IS_ERR(dsi->mipi))
-		return PTR_ERR(dsi->mipi);
+	if (IS_ERR(dsi->mipi)) {
+		err = PTR_ERR(dsi->mipi);
+		goto remove;
+	}
 
 	dsi->host.ops = &tegra_dsi_host_ops;
 	dsi->host.dev = &pdev->dev;
@@ -1654,6 +1668,8 @@ static int tegra_dsi_probe(struct platform_device *pdev)
 	mipi_dsi_host_unregister(&dsi->host);
 mipi_free:
 	tegra_mipi_free(dsi->mipi);
+remove:
+	tegra_output_remove(&dsi->output);
 	return err;
 }
 
-- 
2.43.0

[PATCH 5.10 116/238] drm/tegra: dsi: Fix missing pm_runtime_disable() in the error handling path of tegra_dsi_probe()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 5286a9fc280c45b6b307ee1b07f7a997e042252c ]

If an error occurs after calling pm_runtime_enable(), pm_runtime_disable()
should be called as already done in the remove function.

Fixes: ef8187d75265 ("drm/tegra: dsi: Implement runtime PM")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ee4a15c9cd4b574a55cd67c30d2411239ba2cee9.1693667005.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/dsi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/tegra/dsi.c b/drivers/gpu/drm/tegra/dsi.c
index 815e32e05f600..7bb26655cb3cc 100644
--- a/drivers/gpu/drm/tegra/dsi.c
+++ b/drivers/gpu/drm/tegra/dsi.c
@@ -1665,6 +1665,7 @@ static int tegra_dsi_probe(struct platform_device *pdev)
 	return 0;
 
 unregister:
+	pm_runtime_disable(&pdev->dev);
 	mipi_dsi_host_unregister(&dsi->host);
 mipi_free:
 	tegra_mipi_free(dsi->mipi);
-- 
2.43.0

[PATCH 5.10 117/238] drm/tegra: output: Fix missing i2c_put_adapter() in the error handling paths of tegra_output_probe()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 2db4578ef6ffb2b52115ca0ebf897b60ec559556 ]

If an error occurs after a successful of_get_i2c_adapter_by_node() call, it
should be undone by a corresponding i2c_put_adapter().

Add the missing i2c_put_adapter() call.

Fixes: 9be7d864cf07 ("drm/tegra: Implement panel support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b38604178991e1f08b2cda219103be266be2d680.1693667005.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/output.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/tegra/output.c b/drivers/gpu/drm/tegra/output.c
index 47d26b5d99456..7ccd010a821b7 100644
--- a/drivers/gpu/drm/tegra/output.c
+++ b/drivers/gpu/drm/tegra/output.c
@@ -139,8 +139,10 @@ int tegra_output_probe(struct tegra_output *output)
 						       GPIOD_IN,
 						       "HDMI hotplug detect");
 	if (IS_ERR(output->hpd_gpio)) {
-		if (PTR_ERR(output->hpd_gpio) != -ENOENT)
-			return PTR_ERR(output->hpd_gpio);
+		if (PTR_ERR(output->hpd_gpio) != -ENOENT) {
+			err = PTR_ERR(output->hpd_gpio);
+			goto put_i2c;
+		}
 
 		output->hpd_gpio = NULL;
 	}
@@ -149,7 +151,7 @@ int tegra_output_probe(struct tegra_output *output)
 		err = gpiod_to_irq(output->hpd_gpio);
 		if (err < 0) {
 			dev_err(output->dev, "gpiod_to_irq(): %d\n", err);
-			return err;
+			goto put_i2c;
 		}
 
 		output->hpd_irq = err;
@@ -162,7 +164,7 @@ int tegra_output_probe(struct tegra_output *output)
 		if (err < 0) {
 			dev_err(output->dev, "failed to request IRQ#%u: %d\n",
 				output->hpd_irq, err);
-			return err;
+			goto put_i2c;
 		}
 
 		output->connector.polled = DRM_CONNECTOR_POLL_HPD;
@@ -176,6 +178,12 @@ int tegra_output_probe(struct tegra_output *output)
 	}
 
 	return 0;
+
+put_i2c:
+	if (output->ddc)
+		i2c_put_adapter(output->ddc);
+
+	return err;
 }
 
 void tegra_output_remove(struct tegra_output *output)
-- 
2.43.0

[PATCH 5.10 118/238] drm/rockchip: inno_hdmi: Fix video timing

[Sasha Levin]

From: Alex Bee <knaerzche@gmail.com>

[ Upstream commit 47a145c03484d33e65d773169d5ca1b9fe2a492e ]

The controller wants the difference between *total and *sync_start in the
HDMI_VIDEO_EXT_*DELAY registers. Otherwise the signal is very unstable for
certain non-VIC modes. See downstream commit [0].

[0] https://github.com/rockchip-linux/kernel/commit/8eb559f2502c

Fixes: 412d4ae6b7a5 ("drm/rockchip: hdmi: add Innosilicon HDMI support")
Co-developed-by: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-4-knaerzche@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/rockchip/inno_hdmi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index 78120da5e63aa..27540d308ccb9 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -402,7 +402,7 @@ static int inno_hdmi_config_video_timing(struct inno_hdmi *hdmi,
 	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HBLANK_L, value & 0xFF);
 	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HBLANK_H, (value >> 8) & 0xFF);
 
-	value = mode->hsync_start - mode->hdisplay;
+	value = mode->htotal - mode->hsync_start;
 	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HDELAY_L, value & 0xFF);
 	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HDELAY_H, (value >> 8) & 0xFF);
 
@@ -417,7 +417,7 @@ static int inno_hdmi_config_video_timing(struct inno_hdmi *hdmi,
 	value = mode->vtotal - mode->vdisplay;
 	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VBLANK, value & 0xFF);
 
-	value = mode->vsync_start - mode->vdisplay;
+	value = mode->vtotal - mode->vsync_start;
 	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VDELAY, value & 0xFF);
 
 	value = mode->vsync_end - mode->vsync_start;
-- 
2.43.0

[PATCH 5.10 119/238] drm: Don't treat 0 as -1 in drm_fixp2int_ceil

[Sasha Levin]

From: Harry Wentland <harry.wentland@amd.com>

[ Upstream commit cf8837d7204481026335461629b84ac7f4538fa5 ]

Unit testing this in VKMS shows that passing 0 into
this function returns -1, which is highly counter-
intuitive. Fix it by checking whether the input is
>= 0 instead of > 0.

Fixes: 64566b5e767f ("drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil")
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108163647.106853-2-harry.wentland@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/drm/drm_fixed.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/drm/drm_fixed.h b/include/drm/drm_fixed.h
index 553210c02ee0f..627efa56e59fb 100644
--- a/include/drm/drm_fixed.h
+++ b/include/drm/drm_fixed.h
@@ -88,7 +88,7 @@ static inline int drm_fixp2int(s64 a)
 
 static inline int drm_fixp2int_ceil(s64 a)
 {
-	if (a > 0)
+	if (a >= 0)
 		return drm_fixp2int(a + DRM_FIXED_ALMOST_ONE);
 	else
 		return drm_fixp2int(a - DRM_FIXED_ALMOST_ONE);
-- 
2.43.0

[PATCH 5.10 120/238] drm/rockchip: lvds: do not overwrite error code

[Sasha Levin]

From: Quentin Schulz <quentin.schulz@theobroma-systems.com>

[ Upstream commit 79b09453c4e369ca81cfb670d0136d089e3b92f0 ]

ret variable stores the return value of drm_of_find_panel_or_bridge
which can return error codes different from EPROBE_DEFER. Therefore,
let's just return that error code instead of forcing it to EPROBE_DEFER.

Fixes: 34cc0aa25456 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120-rk-lvds-defer-msg-v2-1-9c59a5779cf9@theobroma-systems.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/rockchip/rockchip_lvds.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/rockchip/rockchip_lvds.c b/drivers/gpu/drm/rockchip/rockchip_lvds.c
index e2487937c4e3d..1ffb2f710e4bd 100644
--- a/drivers/gpu/drm/rockchip/rockchip_lvds.c
+++ b/drivers/gpu/drm/rockchip/rockchip_lvds.c
@@ -573,7 +573,6 @@ static int rockchip_lvds_bind(struct device *dev, struct device *master,
 		goto err_put_port;
 	} else if (ret) {
 		DRM_DEV_ERROR(dev, "failed to find panel and bridge node\n");
-		ret = -EPROBE_DEFER;
 		goto err_put_port;
 	}
 	if (lvds->panel)
-- 
2.43.0

[PATCH 5.10 121/238] drm/rockchip: lvds: do not print scary message when probing defer

[Sasha Levin]

From: Quentin Schulz <quentin.schulz@theobroma-systems.com>

[ Upstream commit 52d11c863ac92e36a0365249f7f6d27ac48c78bc ]

This scary message can misled the user into thinking something bad has
happened and needs to be fixed, however it could simply be part of a
normal boot process where EPROBE_DEFER is taken into account. Therefore,
let's use dev_err_probe so that this message doesn't get shown (by
default) when the return code is EPROBE_DEFER.

Fixes: 34cc0aa25456 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120-rk-lvds-defer-msg-v2-2-9c59a5779cf9@theobroma-systems.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/rockchip/rockchip_lvds.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/rockchip/rockchip_lvds.c b/drivers/gpu/drm/rockchip/rockchip_lvds.c
index 1ffb2f710e4bd..96c13c182809e 100644
--- a/drivers/gpu/drm/rockchip/rockchip_lvds.c
+++ b/drivers/gpu/drm/rockchip/rockchip_lvds.c
@@ -572,7 +572,7 @@ static int rockchip_lvds_bind(struct device *dev, struct device *master,
 		ret = -EINVAL;
 		goto err_put_port;
 	} else if (ret) {
-		DRM_DEV_ERROR(dev, "failed to find panel and bridge node\n");
+		dev_err_probe(dev, ret, "failed to find panel and bridge node\n");
 		goto err_put_port;
 	}
 	if (lvds->panel)
-- 
2.43.0

[PATCH 5.10 122/238] drm/lima: fix a memleak in lima_heap_alloc

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit 04ae3eb470e52a3c41babe85ff8cee195e4dcbea ]

When lima_vm_map_bo fails, the resources need to be deallocated, or
there will be memleaks.

Fixes: 6aebc51d7aef ("drm/lima: support heap buffer creation")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240117071328.3811480-1-alexious@zju.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/lima/lima_gem.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/lima/lima_gem.c b/drivers/gpu/drm/lima/lima_gem.c
index 11223fe348dfe..894175f2ed492 100644
--- a/drivers/gpu/drm/lima/lima_gem.c
+++ b/drivers/gpu/drm/lima/lima_gem.c
@@ -74,29 +74,34 @@ int lima_heap_alloc(struct lima_bo *bo, struct lima_vm *vm)
 	} else {
 		bo->base.sgt = kmalloc(sizeof(*bo->base.sgt), GFP_KERNEL);
 		if (!bo->base.sgt) {
-			sg_free_table(&sgt);
-			return -ENOMEM;
+			ret = -ENOMEM;
+			goto err_out0;
 		}
 	}
 
 	ret = dma_map_sgtable(dev, &sgt, DMA_BIDIRECTIONAL, 0);
-	if (ret) {
-		sg_free_table(&sgt);
-		kfree(bo->base.sgt);
-		bo->base.sgt = NULL;
-		return ret;
-	}
+	if (ret)
+		goto err_out1;
 
 	*bo->base.sgt = sgt;
 
 	if (vm) {
 		ret = lima_vm_map_bo(vm, bo, old_size >> PAGE_SHIFT);
 		if (ret)
-			return ret;
+			goto err_out2;
 	}
 
 	bo->heap_size = new_size;
 	return 0;
+
+err_out2:
+	dma_unmap_sgtable(dev, &sgt, DMA_BIDIRECTIONAL, 0);
+err_out1:
+	kfree(bo->base.sgt);
+	bo->base.sgt = NULL;
+err_out0:
+	sg_free_table(&sgt);
+	return ret;
 }
 
 int lima_gem_create_handle(struct drm_device *dev, struct drm_file *file,
-- 
2.43.0

[PATCH 5.10 123/238] dmaengine: tegra210-adma: Update dependency to ARCH_TEGRA

[Sasha Levin]

From: Peter Robinson <pbrobinson@gmail.com>

[ Upstream commit 33b7db45533af240fe44e809f9dc4d604cf82d07 ]

Update the architecture dependency to be the generic Tegra
because the driver works on the four latest Tegra generations
not just T210, if you build a kernel with a specific
ARCH_TEGRA_xxx_SOC option that excludes 210 you don't get
this driver.

Fixes: 433de642a76c9 ("dmaengine: tegra210-adma: add support for Tegra186/Tegra194")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Sameer Pujar <spujar@nvidia.com>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20240112093310.329642-2-pbrobinson@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/Kconfig | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 7e1bd79fbee8f..02b98f979479a 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -614,16 +614,16 @@ config TEGRA20_APB_DMA
 
 config TEGRA210_ADMA
 	tristate "NVIDIA Tegra210 ADMA support"
-	depends on (ARCH_TEGRA_210_SOC || COMPILE_TEST)
+	depends on (ARCH_TEGRA || COMPILE_TEST)
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
 	help
-	  Support for the NVIDIA Tegra210 ADMA controller driver. The
-	  DMA controller has multiple DMA channels and is used to service
-	  various audio clients in the Tegra210 audio processing engine
-	  (APE). This DMA controller transfers data from memory to
-	  peripheral and vice versa. It does not support memory to
-	  memory data transfer.
+	  Support for the NVIDIA Tegra210/Tegra186/Tegra194/Tegra234 ADMA
+	  controller driver. The DMA controller has multiple DMA channels
+	  and is used to service various audio clients in the Tegra210
+	  audio processing engine (APE). This DMA controller transfers
+	  data from memory to peripheral and vice versa. It does not
+	  support memory to memory data transfer.
 
 config TIMB_DMA
 	tristate "Timberdale FPGA DMA support"
-- 
2.43.0

[PATCH 5.10 124/238] media: tc358743: register v4l2 async device only after successful setup

[Sasha Levin]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit 87399f1ff92203d65f1febf5919429f4bb613a02 ]

Ensure the device has been setup correctly before registering the v4l2
async device, thus allowing userspace to access.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Fixes: 4c5211a10039 ("[media] tc358743: register v4l2 asynchronous subdevice")
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240110090111.458115-1-alexander.stein@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/tc358743.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c
index f21da11caf224..8bcb4b354c895 100644
--- a/drivers/media/i2c/tc358743.c
+++ b/drivers/media/i2c/tc358743.c
@@ -2108,9 +2108,6 @@ static int tc358743_probe(struct i2c_client *client)
 	state->mbus_fmt_code = MEDIA_BUS_FMT_RGB888_1X24;
 
 	sd->dev = &client->dev;
-	err = v4l2_async_register_subdev(sd);
-	if (err < 0)
-		goto err_hdl;
 
 	mutex_init(&state->confctl_mutex);
 
@@ -2168,6 +2165,10 @@ static int tc358743_probe(struct i2c_client *client)
 	if (err)
 		goto err_work_queues;
 
+	err = v4l2_async_register_subdev(sd);
+	if (err < 0)
+		goto err_work_queues;
+
 	v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
 		  client->addr << 1, client->adapter->name);
 
-- 
2.43.0

[PATCH 5.10 125/238] PCI/DPC: Print all TLP Prefixes, not just the first

[Sasha Levin]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

[ Upstream commit 6568d82512b0a64809acff3d7a747362fa4288c8 ]

The TLP Prefix Log Register consists of multiple DWORDs (PCIe r6.1 sec
7.9.14.13) but the loop in dpc_process_rp_pio_error() keeps reading from
the first DWORD, so we print only the first PIO TLP Prefix (duplicated
several times), and we never print the second, third, etc., Prefixes.

Add the iteration count based offset calculation into the config read.

Fixes: f20c4ea49ec4 ("PCI/DPC: Add eDPC support")
Link: https://lore.kernel.org/r/20240118110815.3867-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: add user-visible details to commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pcie/dpc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index f21d64ae4ffcc..cf0d4ba2e157a 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -231,7 +231,7 @@ static void dpc_process_rp_pio_error(struct pci_dev *pdev)
 
 	for (i = 0; i < pdev->dpc_rp_log_size - 5; i++) {
 		pci_read_config_dword(pdev,
-			cap + PCI_EXP_DPC_RP_PIO_TLPPREFIX_LOG, &prefix);
+			cap + PCI_EXP_DPC_RP_PIO_TLPPREFIX_LOG + i * 4, &prefix);
 		pci_err(pdev, "TLP Prefix Header: dw%d, %#010x\n", i, prefix);
 	}
  clear_status:
-- 
2.43.0

[PATCH 5.10 126/238] perf record: Fix possible incorrect free in record__switch_output()

[Sasha Levin]

From: Yang Jihong <yangjihong1@huawei.com>

[ Upstream commit aff10a165201f6f60cff225083ce301ad3f5d8f1 ]

perf_data__switch() may not assign a legal value to 'new_filename'.
In this case, 'new_filename' uses the on-stack value, which may cause a
incorrect free and unexpected result.

Fixes: 03724b2e9c45 ("perf record: Allow to limit number of reported perf.data files")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240119040304.3708522-2-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/builtin-record.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index e5c938d538ee5..167cd8d3b7a21 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -1264,8 +1264,8 @@ static int
 record__switch_output(struct record *rec, bool at_exit)
 {
 	struct perf_data *data = &rec->data;
+	char *new_filename = NULL;
 	int fd, err;
-	char *new_filename;
 
 	/* Same Size:      "2015122520103046"*/
 	char timestamp[] = "InvalidTimestamp";
-- 
2.43.0

[PATCH 5.10 127/238] HID: lenovo: Add middleclick_workaround sysfs knob for cptkbd

[Sasha Levin]

From: Mikhail Khvainitski <me@khvoinitsky.org>

[ Upstream commit 2814646f76f8518326964f12ff20aaee70ba154d ]

Previous attempt to autodetect well-behaving patched firmware
introduced in commit 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw
on cptkbd and stop applying workaround") has shown that there are
false-positives on original firmware (on both 1st gen and 2nd gen
keyboards) which causes the middle button click workaround to be
mistakenly disabled.

This commit adds explicit parameter to sysfs to control this
workaround.

Fixes: 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround")
Fixes: 43527a0094c1 ("HID: lenovo: Restrict detection of patched firmware only to USB cptkbd")
Signed-off-by: Mikhail Khvainitski <me@khvoinitsky.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-lenovo.c | 57 +++++++++++++++++++++++++++-------------
 1 file changed, 39 insertions(+), 18 deletions(-)

diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-lenovo.c
index 249af8d26fe78..c9fdeffbe1a9e 100644
--- a/drivers/hid/hid-lenovo.c
+++ b/drivers/hid/hid-lenovo.c
@@ -53,10 +53,10 @@ struct lenovo_drvdata {
 	/* 0: Up
 	 * 1: Down (undecided)
 	 * 2: Scrolling
-	 * 3: Patched firmware, disable workaround
 	 */
 	u8 middlebutton_state;
 	bool fn_lock;
+	bool middleclick_workaround_cptkbd;
 };
 
 #define map_key_clear(c) hid_map_usage_clear(hi, usage, bit, max, EV_KEY, (c))
@@ -418,6 +418,36 @@ static ssize_t attr_sensitivity_store_cptkbd(struct device *dev,
 	return count;
 }
 
+static ssize_t attr_middleclick_workaround_show_cptkbd(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct hid_device *hdev = to_hid_device(dev);
+	struct lenovo_drvdata *cptkbd_data = hid_get_drvdata(hdev);
+
+	return snprintf(buf, PAGE_SIZE, "%u\n",
+		cptkbd_data->middleclick_workaround_cptkbd);
+}
+
+static ssize_t attr_middleclick_workaround_store_cptkbd(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf,
+		size_t count)
+{
+	struct hid_device *hdev = to_hid_device(dev);
+	struct lenovo_drvdata *cptkbd_data = hid_get_drvdata(hdev);
+	int value;
+
+	if (kstrtoint(buf, 10, &value))
+		return -EINVAL;
+	if (value < 0 || value > 1)
+		return -EINVAL;
+
+	cptkbd_data->middleclick_workaround_cptkbd = !!value;
+
+	return count;
+}
+
 
 static struct device_attribute dev_attr_fn_lock =
 	__ATTR(fn_lock, S_IWUSR | S_IRUGO,
@@ -429,10 +459,16 @@ static struct device_attribute dev_attr_sensitivity_cptkbd =
 			attr_sensitivity_show_cptkbd,
 			attr_sensitivity_store_cptkbd);
 
+static struct device_attribute dev_attr_middleclick_workaround_cptkbd =
+	__ATTR(middleclick_workaround, S_IWUSR | S_IRUGO,
+			attr_middleclick_workaround_show_cptkbd,
+			attr_middleclick_workaround_store_cptkbd);
+
 
 static struct attribute *lenovo_attributes_cptkbd[] = {
 	&dev_attr_fn_lock.attr,
 	&dev_attr_sensitivity_cptkbd.attr,
+	&dev_attr_middleclick_workaround_cptkbd.attr,
 	NULL
 };
 
@@ -483,23 +519,7 @@ static int lenovo_event_cptkbd(struct hid_device *hdev,
 {
 	struct lenovo_drvdata *cptkbd_data = hid_get_drvdata(hdev);
 
-	if (cptkbd_data->middlebutton_state != 3) {
-		/* REL_X and REL_Y events during middle button pressed
-		 * are only possible on patched, bug-free firmware
-		 * so set middlebutton_state to 3
-		 * to never apply workaround anymore
-		 */
-		if (hdev->product == USB_DEVICE_ID_LENOVO_CUSBKBD &&
-				cptkbd_data->middlebutton_state == 1 &&
-				usage->type == EV_REL &&
-				(usage->code == REL_X || usage->code == REL_Y)) {
-			cptkbd_data->middlebutton_state = 3;
-			/* send middle button press which was hold before */
-			input_event(field->hidinput->input,
-				EV_KEY, BTN_MIDDLE, 1);
-			input_sync(field->hidinput->input);
-		}
-
+	if (cptkbd_data->middleclick_workaround_cptkbd) {
 		/* "wheel" scroll events */
 		if (usage->type == EV_REL && (usage->code == REL_WHEEL ||
 				usage->code == REL_HWHEEL)) {
@@ -976,6 +996,7 @@ static int lenovo_probe_cptkbd(struct hid_device *hdev)
 	cptkbd_data->middlebutton_state = 0;
 	cptkbd_data->fn_lock = true;
 	cptkbd_data->sensitivity = 0x05;
+	cptkbd_data->middleclick_workaround_cptkbd = true;
 	lenovo_features_set_cptkbd(hdev);
 
 	ret = sysfs_create_group(&hdev->dev.kobj, &lenovo_attr_group_cptkbd);
-- 
2.43.0

[PATCH 5.10 128/238] drm/amd/display: Fix a potential buffer overflow in 'dp_dsc_clock_en_read()'

[Sasha Levin]

From: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>

[ Upstream commit 4b09715f1504f1b6e8dff0e9643630610bc05141 ]

Tell snprintf() to store at most 10 bytes in the output buffer
instead of 30.

Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1508 dp_dsc_clock_en_read() error: snprintf() is printing too much 30 vs 10

Fixes: c06e09b76639 ("drm/amd/display: Add DSC parameters logging to debugfs")
Cc: Alex Hung <alex.hung@amd.com>
Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
index e43f82bcb231a..32dbd2a270887 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
@@ -1179,7 +1179,7 @@ static ssize_t dp_dsc_clock_en_read(struct file *f, char __user *buf,
 	const uint32_t rd_buf_size = 10;
 	struct pipe_ctx *pipe_ctx;
 	ssize_t result = 0;
-	int i, r, str_len = 30;
+	int i, r, str_len = 10;
 
 	rd_buf = kcalloc(rd_buf_size, sizeof(char), GFP_KERNEL);
 
-- 
2.43.0

[PATCH 5.10 129/238] drm/amd/display: Fix potential NULL pointer dereferences in 'dcn10_set_output_transfer_func()'

[Sasha Levin]

From: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>

[ Upstream commit 9ccfe80d022df7c595f1925afb31de2232900656 ]

The 'stream' pointer is used in dcn10_set_output_transfer_func() before
the check if 'stream' is NULL.

Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn10/dcn10_hwseq.c:1892 dcn10_set_output_transfer_func() warn: variable dereferenced before check 'stream' (see line 1875)

Fixes: ddef02de0d71 ("drm/amd/display: add null checks before logging")
Cc: Wyatt Wood <wyatt.wood@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 1c669f115dd80..8cf6e307ae36e 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -1669,6 +1669,9 @@ bool dcn10_set_output_transfer_func(struct dc *dc, struct pipe_ctx *pipe_ctx,
 {
 	struct dpp *dpp = pipe_ctx->plane_res.dpp;
 
+	if (!stream)
+		return false;
+
 	if (dpp == NULL)
 		return false;
 
@@ -1691,8 +1694,8 @@ bool dcn10_set_output_transfer_func(struct dc *dc, struct pipe_ctx *pipe_ctx,
 	} else
 		dpp->funcs->dpp_program_regamma_pwl(dpp, NULL, OPP_REGAMMA_BYPASS);
 
-	if (stream != NULL && stream->ctx != NULL &&
-			stream->out_transfer_func != NULL) {
+	if (stream->ctx &&
+	    stream->out_transfer_func) {
 		log_tf(stream->ctx,
 				stream->out_transfer_func,
 				dpp->regamma_params.hw_points_num);
-- 
2.43.0

[PATCH 5.10 130/238] perf evsel: Fix duplicate initialization of data->id in evsel__parse_sample()

[Sasha Levin]

From: Yang Jihong <yangjihong1@huawei.com>

[ Upstream commit 4962aec0d684c8edb14574ccd0da53e4926ff834 ]

data->id has been initialized at line 2362, remove duplicate initialization.

Fixes: 3ad31d8a0df2 ("perf evsel: Centralize perf_sample initialization")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240127025756.4041808-1-yangjihong1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/evsel.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index 1a1cbd16d76d4..d9a4c0202a8c3 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -2109,7 +2109,6 @@ int evsel__parse_sample(struct evsel *evsel, union perf_event *event,
 	data->period = evsel->core.attr.sample_period;
 	data->cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK;
 	data->misc    = event->header.misc;
-	data->id = -1ULL;
 	data->data_src = PERF_MEM_DATA_SRC_NONE;
 
 	if (event->header.type != PERF_RECORD_SAMPLE) {
-- 
2.43.0

[PATCH 5.10 131/238] PCI/AER: Fix rootport attribute paths in ABI docs

[Sasha Levin]

From: Johan Hovold <johan+linaro@kernel.org>

[ Upstream commit 0e7d29a39a546161ea3a49e8e282a43212d7ff68 ]

The 'aer_stats' directory never made it into the sixth and final revision
of the series adding the sysfs AER attributes.

Link: https://lore.kernel.org/r/20240202131635.11405-2-johan+linaro@kernel.org
Link: https://lore.kernel.org/lkml/20180621184822.GB14136@bhelgaas-glaptop.roam.corp.google.com/
Fixes: 12833017e581 ("PCI/AER: Add sysfs attributes for rootport cumulative stats")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
index 860db53037a58..24087d5fd417a 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
+++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
@@ -100,19 +100,19 @@ collectors) that are AER capable. These indicate the number of error messages as
 device, so these counters include them and are thus cumulative of all the error
 messages on the PCI hierarchy originating at that root port.
 
-What:		/sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_cor
+What:		/sys/bus/pci/devices/<dev>/aer_rootport_total_err_cor
 Date:		July 2018
 KernelVersion: 4.19.0
 Contact:	linux-pci@vger.kernel.org, rajatja@google.com
 Description:	Total number of ERR_COR messages reported to rootport.
 
-What:	    /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_fatal
+What:		/sys/bus/pci/devices/<dev>/aer_rootport_total_err_fatal
 Date:		July 2018
 KernelVersion: 4.19.0
 Contact:	linux-pci@vger.kernel.org, rajatja@google.com
 Description:	Total number of ERR_FATAL messages reported to rootport.
 
-What:	    /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_nonfatal
+What:		/sys/bus/pci/devices/<dev>/aer_rootport_total_err_nonfatal
 Date:		July 2018
 KernelVersion: 4.19.0
 Contact:	linux-pci@vger.kernel.org, rajatja@google.com
-- 
2.43.0

[PATCH 5.10 132/238] media: em28xx: annotate unchecked call to media_device_register()

[Sasha Levin]

From: Nikita Zhandarovich <n.zhandarovich@fintech.ru>

[ Upstream commit fd61d77a3d28444b2635f0c8b5a2ecd6a4d94026 ]

Static analyzers generate alerts for an unchecked call to
`media_device_register()`. However, in this case, the device will work
reliably without the media controller API.

Add a comment above the call to prevent future unnecessary changes.

Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fixes: 37ecc7b1278f ("[media] em28xx: add media controller support")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/em28xx/em28xx-cards.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 26408a972b443..5deee83132c62 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -4049,6 +4049,10 @@ static int em28xx_usb_probe(struct usb_interface *intf,
 	 * topology will likely change after the load of the em28xx subdrivers.
 	 */
 #ifdef CONFIG_MEDIA_CONTROLLER
+	/*
+	 * No need to check the return value, the device will still be
+	 * usable without media controller API.
+	 */
 	retval = media_device_register(dev->media_dev);
 #endif
 
-- 
2.43.0

[PATCH 5.10 133/238] media: v4l2-tpg: fix some memleaks in tpg_alloc

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit 8cf9c5051076e0eb958f4361d50d8b0c3ee6691c ]

In tpg_alloc, resources should be deallocated in each and every
error-handling paths, since they are allocated in for statements.
Otherwise there would be memleaks because tpg_free is called only when
tpg_alloc return 0.

Fixes: 63881df94d3e ("[media] vivid: add the Test Pattern Generator")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c | 52 +++++++++++++++----
 1 file changed, 42 insertions(+), 10 deletions(-)

diff --git a/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c b/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c
index 7607b516a7c43..68968bfa2edc1 100644
--- a/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c
+++ b/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c
@@ -113,6 +113,7 @@ int tpg_alloc(struct tpg_data *tpg, unsigned max_w)
 {
 	unsigned pat;
 	unsigned plane;
+	int ret = 0;
 
 	tpg->max_line_width = max_w;
 	for (pat = 0; pat < TPG_MAX_PAT_LINES; pat++) {
@@ -121,14 +122,18 @@ int tpg_alloc(struct tpg_data *tpg, unsigned max_w)
 
 			tpg->lines[pat][plane] =
 				vzalloc(array3_size(max_w, 2, pixelsz));
-			if (!tpg->lines[pat][plane])
-				return -ENOMEM;
+			if (!tpg->lines[pat][plane]) {
+				ret = -ENOMEM;
+				goto free_lines;
+			}
 			if (plane == 0)
 				continue;
 			tpg->downsampled_lines[pat][plane] =
 				vzalloc(array3_size(max_w, 2, pixelsz));
-			if (!tpg->downsampled_lines[pat][plane])
-				return -ENOMEM;
+			if (!tpg->downsampled_lines[pat][plane]) {
+				ret = -ENOMEM;
+				goto free_lines;
+			}
 		}
 	}
 	for (plane = 0; plane < TPG_MAX_PLANES; plane++) {
@@ -136,18 +141,45 @@ int tpg_alloc(struct tpg_data *tpg, unsigned max_w)
 
 		tpg->contrast_line[plane] =
 			vzalloc(array_size(pixelsz, max_w));
-		if (!tpg->contrast_line[plane])
-			return -ENOMEM;
+		if (!tpg->contrast_line[plane]) {
+			ret = -ENOMEM;
+			goto free_contrast_line;
+		}
 		tpg->black_line[plane] =
 			vzalloc(array_size(pixelsz, max_w));
-		if (!tpg->black_line[plane])
-			return -ENOMEM;
+		if (!tpg->black_line[plane]) {
+			ret = -ENOMEM;
+			goto free_contrast_line;
+		}
 		tpg->random_line[plane] =
 			vzalloc(array3_size(max_w, 2, pixelsz));
-		if (!tpg->random_line[plane])
-			return -ENOMEM;
+		if (!tpg->random_line[plane]) {
+			ret = -ENOMEM;
+			goto free_contrast_line;
+		}
 	}
 	return 0;
+
+free_contrast_line:
+	for (plane = 0; plane < TPG_MAX_PLANES; plane++) {
+		vfree(tpg->contrast_line[plane]);
+		vfree(tpg->black_line[plane]);
+		vfree(tpg->random_line[plane]);
+		tpg->contrast_line[plane] = NULL;
+		tpg->black_line[plane] = NULL;
+		tpg->random_line[plane] = NULL;
+	}
+free_lines:
+	for (pat = 0; pat < TPG_MAX_PAT_LINES; pat++)
+		for (plane = 0; plane < TPG_MAX_PLANES; plane++) {
+			vfree(tpg->lines[pat][plane]);
+			tpg->lines[pat][plane] = NULL;
+			if (plane == 0)
+				continue;
+			vfree(tpg->downsampled_lines[pat][plane]);
+			tpg->downsampled_lines[pat][plane] = NULL;
+		}
+	return ret;
 }
 EXPORT_SYMBOL_GPL(tpg_alloc);
 
-- 
2.43.0

[PATCH 5.10 134/238] media: v4l2-mem2mem: fix a memleak in v4l2_m2m_register_entity

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit 8f94b49a5b5d386c038e355bef6347298aabd211 ]

The entity->name (i.e. name) is allocated in v4l2_m2m_register_entity
but isn't freed in its following error-handling paths. This patch
adds such deallocation to prevent memleak of entity->name.

Fixes: be2fff656322 ("media: add helpers for memory-to-memory media controller")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/v4l2-core/v4l2-mem2mem.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c
index ad14d52141067..56d320b1a1ca7 100644
--- a/drivers/media/v4l2-core/v4l2-mem2mem.c
+++ b/drivers/media/v4l2-core/v4l2-mem2mem.c
@@ -1053,11 +1053,17 @@ static int v4l2_m2m_register_entity(struct media_device *mdev,
 	entity->function = function;
 
 	ret = media_entity_pads_init(entity, num_pads, pads);
-	if (ret)
+	if (ret) {
+		kfree(entity->name);
+		entity->name = NULL;
 		return ret;
+	}
 	ret = media_device_register_entity(mdev, entity);
-	if (ret)
+	if (ret) {
+		kfree(entity->name);
+		entity->name = NULL;
 		return ret;
+	}
 
 	return 0;
 }
-- 
2.43.0

[PATCH 5.10 135/238] media: edia: dvbdev: fix a use-after-free

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit 8c64f4cdf4e6cc5682c52523713af8c39c94e6d5 ]

In dvb_register_device, *pdvbdev is set equal to dvbdev, which is freed
in several error-handling paths. However, *pdvbdev is not set to NULL
after dvbdev's deallocation, causing use-after-frees in many places,
for example, in the following call chain:

budget_register
  |-> dvb_dmxdev_init
        |-> dvb_register_device
  |-> dvb_dmxdev_release
        |-> dvb_unregister_device
              |-> dvb_remove_device
                    |-> dvb_device_put
                          |-> kref_put

When calling dvb_unregister_device, dmxdev->dvbdev (i.e. *pdvbdev in
dvb_register_device) could point to memory that had been freed in
dvb_register_device. Thereafter, this pointer is transferred to
kref_put and triggering a use-after-free.

Link: https://lore.kernel.org/linux-media/20240203134046.3120099-1-alexious@zju.edu.cn
Fixes: b61901024776 ("V4L/DVB (5244): Dvbdev: fix illegal re-usage of fileoperations struct")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-core/dvbdev.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c
index 3a83e8e092568..23a0c209744dc 100644
--- a/drivers/media/dvb-core/dvbdev.c
+++ b/drivers/media/dvb-core/dvbdev.c
@@ -504,6 +504,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		dvbdevfops = kmemdup(template->fops, sizeof(*dvbdevfops), GFP_KERNEL);
 		if (!dvbdevfops) {
 			kfree(dvbdev);
+			*pdvbdev = NULL;
 			mutex_unlock(&dvbdev_register_lock);
 			return -ENOMEM;
 		}
@@ -512,6 +513,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		if (!new_node) {
 			kfree(dvbdevfops);
 			kfree(dvbdev);
+			*pdvbdev = NULL;
 			mutex_unlock(&dvbdev_register_lock);
 			return -ENOMEM;
 		}
@@ -545,6 +547,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		}
 		list_del (&dvbdev->list_head);
 		kfree(dvbdev);
+		*pdvbdev = NULL;
 		up_write(&minor_rwsem);
 		mutex_unlock(&dvbdev_register_lock);
 		return -EINVAL;
@@ -567,6 +570,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		dvb_media_device_free(dvbdev);
 		list_del (&dvbdev->list_head);
 		kfree(dvbdev);
+		*pdvbdev = NULL;
 		mutex_unlock(&dvbdev_register_lock);
 		return ret;
 	}
@@ -585,6 +589,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		dvb_media_device_free(dvbdev);
 		list_del (&dvbdev->list_head);
 		kfree(dvbdev);
+		*pdvbdev = NULL;
 		mutex_unlock(&dvbdev_register_lock);
 		return PTR_ERR(clsdev);
 	}
-- 
2.43.0

[PATCH 5.10 136/238] pinctrl: mediatek: Drop bogus slew rate register range for MT8192

[Sasha Levin]

From: Chen-Yu Tsai <wenst@chromium.org>

[ Upstream commit e15ab05a6b3ed42f2f43f8bd1a1abdbde64afecd ]

The MT8192 does not support configuring pin slew rate. This is evident
from both the datasheet, and the fact that the driver points the slew
rate register range at the GPIO direction register range.

Drop the bogus setting.

Fixes: d32f38f2a8fc ("pinctrl: mediatek: Add pinctrl driver for mt8192")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240131071910.3950450-2-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/mediatek/pinctrl-mt8192.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8192.c b/drivers/pinctrl/mediatek/pinctrl-mt8192.c
index 0c16b2c756bf3..f3020e3c8533b 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt8192.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt8192.c
@@ -1346,7 +1346,6 @@ static const struct mtk_pin_reg_calc mt8192_reg_cals[PINCTRL_PIN_REG_MAX] = {
 	[PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt8192_pin_dir_range),
 	[PINCTRL_PIN_REG_DI] = MTK_RANGE(mt8192_pin_di_range),
 	[PINCTRL_PIN_REG_DO] = MTK_RANGE(mt8192_pin_do_range),
-	[PINCTRL_PIN_REG_SR] = MTK_RANGE(mt8192_pin_dir_range),
 	[PINCTRL_PIN_REG_SMT] = MTK_RANGE(mt8192_pin_smt_range),
 	[PINCTRL_PIN_REG_IES] = MTK_RANGE(mt8192_pin_ies_range),
 	[PINCTRL_PIN_REG_PU] = MTK_RANGE(mt8192_pin_pu_range),
-- 
2.43.0

[PATCH 5.10 137/238] clk: qcom: reset: Commonize the de/assert functions

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit eda40d9c583e95e0b6ac69d2950eec10f802e0e8 ]

They do the same thing, except the last argument of the last function
call differs. Commonize them.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-2-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 2f8cf2c3f3e3 ("clk: qcom: reset: Ensure write completion on reset de/assertion")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/reset.c | 22 +++++++++-------------
 1 file changed, 9 insertions(+), 13 deletions(-)

diff --git a/drivers/clk/qcom/reset.c b/drivers/clk/qcom/reset.c
index e45e32804d2c7..20d1d35aaf229 100644
--- a/drivers/clk/qcom/reset.c
+++ b/drivers/clk/qcom/reset.c
@@ -22,8 +22,8 @@ static int qcom_reset(struct reset_controller_dev *rcdev, unsigned long id)
 	return 0;
 }
 
-static int
-qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
+static int qcom_reset_set_assert(struct reset_controller_dev *rcdev,
+				 unsigned long id, bool assert)
 {
 	struct qcom_reset_controller *rst;
 	const struct qcom_reset_map *map;
@@ -33,21 +33,17 @@ qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
 	map = &rst->reset_map[id];
 	mask = map->bitmask ? map->bitmask : BIT(map->bit);
 
-	return regmap_update_bits(rst->regmap, map->reg, mask, mask);
+	return regmap_update_bits(rst->regmap, map->reg, mask, assert ? mask : 0);
 }
 
-static int
-qcom_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
+static int qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
 {
-	struct qcom_reset_controller *rst;
-	const struct qcom_reset_map *map;
-	u32 mask;
-
-	rst = to_qcom_reset_controller(rcdev);
-	map = &rst->reset_map[id];
-	mask = map->bitmask ? map->bitmask : BIT(map->bit);
+	return qcom_reset_set_assert(rcdev, id, true);
+}
 
-	return regmap_update_bits(rst->regmap, map->reg, mask, 0);
+static int qcom_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	return qcom_reset_set_assert(rcdev, id, false);
 }
 
 const struct reset_control_ops qcom_reset_ops = {
-- 
2.43.0

[PATCH 5.10 138/238] clk: qcom: reset: Ensure write completion on reset de/assertion

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit 2f8cf2c3f3e3f7ef61bd19abb4b0bb797ad50aaf ]

Trying to toggle the resets in a rapid fashion can lead to the changes
not actually arriving at the clock controller block when we expect them
to. This was observed at least on SM8250.

Read back the value after regmap_update_bits to ensure write completion.

Fixes: b36ba30c8ac6 ("clk: qcom: Add reset controller support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240105-topic-venus_reset-v2-3-c37eba13b5ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/reset.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/reset.c b/drivers/clk/qcom/reset.c
index 20d1d35aaf229..d96c96a9089f4 100644
--- a/drivers/clk/qcom/reset.c
+++ b/drivers/clk/qcom/reset.c
@@ -33,7 +33,12 @@ static int qcom_reset_set_assert(struct reset_controller_dev *rcdev,
 	map = &rst->reset_map[id];
 	mask = map->bitmask ? map->bitmask : BIT(map->bit);
 
-	return regmap_update_bits(rst->regmap, map->reg, mask, assert ? mask : 0);
+	regmap_update_bits(rst->regmap, map->reg, mask, assert ? mask : 0);
+
+	/* Read back the register to ensure write completion, ignore the value */
+	regmap_read(rst->regmap, map->reg, &mask);
+
+	return 0;
 }
 
 static int qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
-- 
2.43.0

[PATCH 5.10 139/238] quota: simplify drop_dquot_ref()

[Sasha Levin]

From: Baokun Li <libaokun1@huawei.com>

[ Upstream commit 7bce48f0fec602b3b6c335963b26d9eefa417788 ]

As Honza said, remove_inode_dquot_ref() currently does not release the
last dquot reference but instead adds the dquot to tofree_head list. This
is because dqput() can sleep while dropping of the last dquot reference
(writing back the dquot and calling ->release_dquot()) and that must not
happen under dq_list_lock. Now that dqput() queues the final dquot cleanup
into a workqueue, remove_inode_dquot_ref() can call dqput() unconditionally
and we can significantly simplify it.

Here we open code the simplified code of remove_inode_dquot_ref() into
remove_dquot_ref() and remove the function put_dquot_list() which is no
longer used.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230630110822.3881712-6-libaokun1@huawei.com>
Stable-dep-of: 179b8c97ebf6 ("quota: Fix rcu annotations of inode dquot pointers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/quota/dquot.c | 70 +++++++-----------------------------------------
 1 file changed, 9 insertions(+), 61 deletions(-)

diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 4bb4b4b79827a..77578332e35ae 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -1086,59 +1086,7 @@ static int add_dquot_ref(struct super_block *sb, int type)
 	return err;
 }
 
-/*
- * Remove references to dquots from inode and add dquot to list for freeing
- * if we have the last reference to dquot
- */
-static void remove_inode_dquot_ref(struct inode *inode, int type,
-				   struct list_head *tofree_head)
-{
-	struct dquot **dquots = i_dquot(inode);
-	struct dquot *dquot = dquots[type];
-
-	if (!dquot)
-		return;
-
-	dquots[type] = NULL;
-	if (list_empty(&dquot->dq_free)) {
-		/*
-		 * The inode still has reference to dquot so it can't be in the
-		 * free list
-		 */
-		spin_lock(&dq_list_lock);
-		list_add(&dquot->dq_free, tofree_head);
-		spin_unlock(&dq_list_lock);
-	} else {
-		/*
-		 * Dquot is already in a list to put so we won't drop the last
-		 * reference here.
-		 */
-		dqput(dquot);
-	}
-}
-
-/*
- * Free list of dquots
- * Dquots are removed from inodes and no new references can be got so we are
- * the only ones holding reference
- */
-static void put_dquot_list(struct list_head *tofree_head)
-{
-	struct list_head *act_head;
-	struct dquot *dquot;
-
-	act_head = tofree_head->next;
-	while (act_head != tofree_head) {
-		dquot = list_entry(act_head, struct dquot, dq_free);
-		act_head = act_head->next;
-		/* Remove dquot from the list so we won't have problems... */
-		list_del_init(&dquot->dq_free);
-		dqput(dquot);
-	}
-}
-
-static void remove_dquot_ref(struct super_block *sb, int type,
-		struct list_head *tofree_head)
+static void remove_dquot_ref(struct super_block *sb, int type)
 {
 	struct inode *inode;
 #ifdef CONFIG_QUOTA_DEBUG
@@ -1155,11 +1103,16 @@ static void remove_dquot_ref(struct super_block *sb, int type,
 		 */
 		spin_lock(&dq_data_lock);
 		if (!IS_NOQUOTA(inode)) {
+			struct dquot **dquots = i_dquot(inode);
+			struct dquot *dquot = dquots[type];
+
 #ifdef CONFIG_QUOTA_DEBUG
 			if (unlikely(inode_get_rsv_space(inode) > 0))
 				reserved = 1;
 #endif
-			remove_inode_dquot_ref(inode, type, tofree_head);
+			dquots[type] = NULL;
+			if (dquot)
+				dqput(dquot);
 		}
 		spin_unlock(&dq_data_lock);
 	}
@@ -1176,13 +1129,8 @@ static void remove_dquot_ref(struct super_block *sb, int type,
 /* Gather all references from inodes and drop them */
 static void drop_dquot_ref(struct super_block *sb, int type)
 {
-	LIST_HEAD(tofree_head);
-
-	if (sb->dq_op) {
-		remove_dquot_ref(sb, type, &tofree_head);
-		synchronize_srcu(&dquot_srcu);
-		put_dquot_list(&tofree_head);
-	}
+	if (sb->dq_op)
+		remove_dquot_ref(sb, type);
 }
 
 static inline
-- 
2.43.0

[PATCH 5.10 140/238] quota: Fix potential NULL pointer dereference

[Sasha Levin]

From: Wang Jianjian <wangjianjian3@huawei.com>

[ Upstream commit d0aa72604fbd80c8aabb46eda00535ed35570f1f ]

Below race may cause NULL pointer dereference

P1					P2
dquot_free_inode			quota_off
					  drop_dquot_ref
					   remove_dquot_ref
					   dquots = i_dquot(inode)
  dquots = i_dquot(inode)
  srcu_read_lock
  dquots[cnt]) != NULL (1)
					     dquots[type] = NULL (2)
  spin_lock(&dquots[cnt]->dq_dqb_lock) (3)
   ....

If dquot_free_inode(or other routines) checks inode's quota pointers (1)
before quota_off sets it to NULL(2) and use it (3) after that, NULL pointer
dereference will be triggered.

So let's fix it by using a temporary pointer to avoid this issue.

Signed-off-by: Wang Jianjian <wangjianjian3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240202081852.2514092-1-wangjianjian3@huawei.com>
Stable-dep-of: 179b8c97ebf6 ("quota: Fix rcu annotations of inode dquot pointers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/quota/dquot.c | 98 ++++++++++++++++++++++++++++--------------------
 1 file changed, 57 insertions(+), 41 deletions(-)

diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 77578332e35ae..3f19ef2cc186d 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -401,15 +401,17 @@ int dquot_mark_dquot_dirty(struct dquot *dquot)
 EXPORT_SYMBOL(dquot_mark_dquot_dirty);
 
 /* Dirtify all the dquots - this can block when journalling */
-static inline int mark_all_dquot_dirty(struct dquot * const *dquot)
+static inline int mark_all_dquot_dirty(struct dquot * const *dquots)
 {
 	int ret, err, cnt;
+	struct dquot *dquot;
 
 	ret = err = 0;
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (dquot[cnt])
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (dquot)
 			/* Even in case of error we have to continue */
-			ret = mark_dquot_dirty(dquot[cnt]);
+			ret = mark_dquot_dirty(dquot);
 		if (!err)
 			err = ret;
 	}
@@ -1686,6 +1688,7 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags)
 	struct dquot_warn warn[MAXQUOTAS];
 	int reserve = flags & DQUOT_SPACE_RESERVE;
 	struct dquot **dquots;
+	struct dquot *dquot;
 
 	if (!inode_quota_active(inode)) {
 		if (reserve) {
@@ -1705,27 +1708,26 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags)
 	index = srcu_read_lock(&dquot_srcu);
 	spin_lock(&inode->i_lock);
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (!dquots[cnt])
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (!dquot)
 			continue;
 		if (reserve) {
-			ret = dquot_add_space(dquots[cnt], 0, number, flags,
-					      &warn[cnt]);
+			ret = dquot_add_space(dquot, 0, number, flags, &warn[cnt]);
 		} else {
-			ret = dquot_add_space(dquots[cnt], number, 0, flags,
-					      &warn[cnt]);
+			ret = dquot_add_space(dquot, number, 0, flags, &warn[cnt]);
 		}
 		if (ret) {
 			/* Back out changes we already did */
 			for (cnt--; cnt >= 0; cnt--) {
-				if (!dquots[cnt])
+				dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+				if (!dquot)
 					continue;
-				spin_lock(&dquots[cnt]->dq_dqb_lock);
+				spin_lock(&dquot->dq_dqb_lock);
 				if (reserve)
-					dquot_free_reserved_space(dquots[cnt],
-								  number);
+					dquot_free_reserved_space(dquot, number);
 				else
-					dquot_decr_space(dquots[cnt], number);
-				spin_unlock(&dquots[cnt]->dq_dqb_lock);
+					dquot_decr_space(dquot, number);
+				spin_unlock(&dquot->dq_dqb_lock);
 			}
 			spin_unlock(&inode->i_lock);
 			goto out_flush_warn;
@@ -1756,6 +1758,7 @@ int dquot_alloc_inode(struct inode *inode)
 	int cnt, ret = 0, index;
 	struct dquot_warn warn[MAXQUOTAS];
 	struct dquot * const *dquots;
+	struct dquot *dquot;
 
 	if (!inode_quota_active(inode))
 		return 0;
@@ -1766,17 +1769,19 @@ int dquot_alloc_inode(struct inode *inode)
 	index = srcu_read_lock(&dquot_srcu);
 	spin_lock(&inode->i_lock);
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (!dquots[cnt])
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (!dquot)
 			continue;
-		ret = dquot_add_inodes(dquots[cnt], 1, &warn[cnt]);
+		ret = dquot_add_inodes(dquot, 1, &warn[cnt]);
 		if (ret) {
 			for (cnt--; cnt >= 0; cnt--) {
-				if (!dquots[cnt])
+				dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+				if (!dquot)
 					continue;
 				/* Back out changes we already did */
-				spin_lock(&dquots[cnt]->dq_dqb_lock);
-				dquot_decr_inodes(dquots[cnt], 1);
-				spin_unlock(&dquots[cnt]->dq_dqb_lock);
+				spin_lock(&dquot->dq_dqb_lock);
+				dquot_decr_inodes(dquot, 1);
+				spin_unlock(&dquot->dq_dqb_lock);
 			}
 			goto warn_put_all;
 		}
@@ -1798,6 +1803,7 @@ EXPORT_SYMBOL(dquot_alloc_inode);
 int dquot_claim_space_nodirty(struct inode *inode, qsize_t number)
 {
 	struct dquot **dquots;
+	struct dquot *dquot;
 	int cnt, index;
 
 	if (!inode_quota_active(inode)) {
@@ -1813,9 +1819,8 @@ int dquot_claim_space_nodirty(struct inode *inode, qsize_t number)
 	spin_lock(&inode->i_lock);
 	/* Claim reserved quotas to allocated quotas */
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (dquots[cnt]) {
-			struct dquot *dquot = dquots[cnt];
-
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (dquot) {
 			spin_lock(&dquot->dq_dqb_lock);
 			if (WARN_ON_ONCE(dquot->dq_dqb.dqb_rsvspace < number))
 				number = dquot->dq_dqb.dqb_rsvspace;
@@ -1840,6 +1845,7 @@ EXPORT_SYMBOL(dquot_claim_space_nodirty);
 void dquot_reclaim_space_nodirty(struct inode *inode, qsize_t number)
 {
 	struct dquot **dquots;
+	struct dquot *dquot;
 	int cnt, index;
 
 	if (!inode_quota_active(inode)) {
@@ -1855,9 +1861,8 @@ void dquot_reclaim_space_nodirty(struct inode *inode, qsize_t number)
 	spin_lock(&inode->i_lock);
 	/* Claim reserved quotas to allocated quotas */
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (dquots[cnt]) {
-			struct dquot *dquot = dquots[cnt];
-
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (dquot) {
 			spin_lock(&dquot->dq_dqb_lock);
 			if (WARN_ON_ONCE(dquot->dq_dqb.dqb_curspace < number))
 				number = dquot->dq_dqb.dqb_curspace;
@@ -1884,6 +1889,7 @@ void __dquot_free_space(struct inode *inode, qsize_t number, int flags)
 	unsigned int cnt;
 	struct dquot_warn warn[MAXQUOTAS];
 	struct dquot **dquots;
+	struct dquot *dquot;
 	int reserve = flags & DQUOT_SPACE_RESERVE, index;
 
 	if (!inode_quota_active(inode)) {
@@ -1904,17 +1910,18 @@ void __dquot_free_space(struct inode *inode, qsize_t number, int flags)
 		int wtype;
 
 		warn[cnt].w_type = QUOTA_NL_NOWARN;
-		if (!dquots[cnt])
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (!dquot)
 			continue;
-		spin_lock(&dquots[cnt]->dq_dqb_lock);
-		wtype = info_bdq_free(dquots[cnt], number);
+		spin_lock(&dquot->dq_dqb_lock);
+		wtype = info_bdq_free(dquot, number);
 		if (wtype != QUOTA_NL_NOWARN)
-			prepare_warning(&warn[cnt], dquots[cnt], wtype);
+			prepare_warning(&warn[cnt], dquot, wtype);
 		if (reserve)
-			dquot_free_reserved_space(dquots[cnt], number);
+			dquot_free_reserved_space(dquot, number);
 		else
-			dquot_decr_space(dquots[cnt], number);
-		spin_unlock(&dquots[cnt]->dq_dqb_lock);
+			dquot_decr_space(dquot, number);
+		spin_unlock(&dquot->dq_dqb_lock);
 	}
 	if (reserve)
 		*inode_reserved_space(inode) -= number;
@@ -1939,6 +1946,7 @@ void dquot_free_inode(struct inode *inode)
 	unsigned int cnt;
 	struct dquot_warn warn[MAXQUOTAS];
 	struct dquot * const *dquots;
+	struct dquot *dquot;
 	int index;
 
 	if (!inode_quota_active(inode))
@@ -1949,16 +1957,16 @@ void dquot_free_inode(struct inode *inode)
 	spin_lock(&inode->i_lock);
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
 		int wtype;
-
 		warn[cnt].w_type = QUOTA_NL_NOWARN;
-		if (!dquots[cnt])
+		dquot = srcu_dereference(dquots[cnt], &dquot_srcu);
+		if (!dquot)
 			continue;
-		spin_lock(&dquots[cnt]->dq_dqb_lock);
-		wtype = info_idq_free(dquots[cnt], 1);
+		spin_lock(&dquot->dq_dqb_lock);
+		wtype = info_idq_free(dquot, 1);
 		if (wtype != QUOTA_NL_NOWARN)
-			prepare_warning(&warn[cnt], dquots[cnt], wtype);
-		dquot_decr_inodes(dquots[cnt], 1);
-		spin_unlock(&dquots[cnt]->dq_dqb_lock);
+			prepare_warning(&warn[cnt], dquot, wtype);
+		dquot_decr_inodes(dquot, 1);
+		spin_unlock(&dquot->dq_dqb_lock);
 	}
 	spin_unlock(&inode->i_lock);
 	mark_all_dquot_dirty(dquots);
@@ -1985,7 +1993,7 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 	qsize_t rsv_space = 0;
 	qsize_t inode_usage = 1;
 	struct dquot *transfer_from[MAXQUOTAS] = {};
-	int cnt, ret = 0;
+	int cnt, index, ret = 0;
 	char is_valid[MAXQUOTAS] = {};
 	struct dquot_warn warn_to[MAXQUOTAS];
 	struct dquot_warn warn_from_inodes[MAXQUOTAS];
@@ -2074,8 +2082,16 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 	spin_unlock(&inode->i_lock);
 	spin_unlock(&dq_data_lock);
 
+	/*
+	 * These arrays are local and we hold dquot references so we don't need
+	 * the srcu protection but still take dquot_srcu to avoid warning in
+	 * mark_all_dquot_dirty().
+	 */
+	index = srcu_read_lock(&dquot_srcu);
 	mark_all_dquot_dirty(transfer_from);
 	mark_all_dquot_dirty(transfer_to);
+	srcu_read_unlock(&dquot_srcu, index);
+
 	flush_warnings(warn_to);
 	flush_warnings(warn_from_inodes);
 	flush_warnings(warn_from_space);
-- 
2.43.0

[PATCH 5.10 141/238] quota: Fix rcu annotations of inode dquot pointers

[Sasha Levin]

From: Jan Kara <jack@suse.cz>

[ Upstream commit 179b8c97ebf63429589f5afeba59a181fe70603e ]

Dquot pointers in i_dquot array in the inode are protected by
dquot_srcu. Annotate the array pointers with __rcu, perform the locked
dereferences with srcu_dereference_check() instead of plain reads, and
set the array elements with rcu_assign_pointer().

Fixes: b9ba6f94b238 ("quota: remove dqptr_sem")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402061900.rTuYDlo6-lkp@intel.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/quota/dquot.c | 66 ++++++++++++++++++++++++++++--------------------
 1 file changed, 39 insertions(+), 27 deletions(-)

diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 3f19ef2cc186d..6a7b7d44753a3 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -401,7 +401,7 @@ int dquot_mark_dquot_dirty(struct dquot *dquot)
 EXPORT_SYMBOL(dquot_mark_dquot_dirty);
 
 /* Dirtify all the dquots - this can block when journalling */
-static inline int mark_all_dquot_dirty(struct dquot * const *dquots)
+static inline int mark_all_dquot_dirty(struct dquot __rcu * const *dquots)
 {
 	int ret, err, cnt;
 	struct dquot *dquot;
@@ -1008,14 +1008,15 @@ struct dquot *dqget(struct super_block *sb, struct kqid qid)
 }
 EXPORT_SYMBOL(dqget);
 
-static inline struct dquot **i_dquot(struct inode *inode)
+static inline struct dquot __rcu **i_dquot(struct inode *inode)
 {
-	return inode->i_sb->s_op->get_dquots(inode);
+	/* Force __rcu for now until filesystems are fixed */
+	return (struct dquot __rcu **)inode->i_sb->s_op->get_dquots(inode);
 }
 
 static int dqinit_needed(struct inode *inode, int type)
 {
-	struct dquot * const *dquots;
+	struct dquot __rcu * const *dquots;
 	int cnt;
 
 	if (IS_NOQUOTA(inode))
@@ -1105,14 +1106,16 @@ static void remove_dquot_ref(struct super_block *sb, int type)
 		 */
 		spin_lock(&dq_data_lock);
 		if (!IS_NOQUOTA(inode)) {
-			struct dquot **dquots = i_dquot(inode);
-			struct dquot *dquot = dquots[type];
+			struct dquot __rcu **dquots = i_dquot(inode);
+			struct dquot *dquot = srcu_dereference_check(
+				dquots[type], &dquot_srcu,
+				lockdep_is_held(&dq_data_lock));
 
 #ifdef CONFIG_QUOTA_DEBUG
 			if (unlikely(inode_get_rsv_space(inode) > 0))
 				reserved = 1;
 #endif
-			dquots[type] = NULL;
+			rcu_assign_pointer(dquots[type], NULL);
 			if (dquot)
 				dqput(dquot);
 		}
@@ -1465,7 +1468,8 @@ static int inode_quota_active(const struct inode *inode)
 static int __dquot_initialize(struct inode *inode, int type)
 {
 	int cnt, init_needed = 0;
-	struct dquot **dquots, *got[MAXQUOTAS] = {};
+	struct dquot __rcu **dquots;
+	struct dquot *got[MAXQUOTAS] = {};
 	struct super_block *sb = inode->i_sb;
 	qsize_t rsv;
 	int ret = 0;
@@ -1540,7 +1544,7 @@ static int __dquot_initialize(struct inode *inode, int type)
 		if (!got[cnt])
 			continue;
 		if (!dquots[cnt]) {
-			dquots[cnt] = got[cnt];
+			rcu_assign_pointer(dquots[cnt], got[cnt]);
 			got[cnt] = NULL;
 			/*
 			 * Make quota reservation system happy if someone
@@ -1548,12 +1552,16 @@ static int __dquot_initialize(struct inode *inode, int type)
 			 */
 			rsv = inode_get_rsv_space(inode);
 			if (unlikely(rsv)) {
+				struct dquot *dquot = srcu_dereference_check(
+					dquots[cnt], &dquot_srcu,
+					lockdep_is_held(&dq_data_lock));
+
 				spin_lock(&inode->i_lock);
 				/* Get reservation again under proper lock */
 				rsv = __inode_get_rsv_space(inode);
-				spin_lock(&dquots[cnt]->dq_dqb_lock);
-				dquots[cnt]->dq_dqb.dqb_rsvspace += rsv;
-				spin_unlock(&dquots[cnt]->dq_dqb_lock);
+				spin_lock(&dquot->dq_dqb_lock);
+				dquot->dq_dqb.dqb_rsvspace += rsv;
+				spin_unlock(&dquot->dq_dqb_lock);
 				spin_unlock(&inode->i_lock);
 			}
 		}
@@ -1575,7 +1583,7 @@ EXPORT_SYMBOL(dquot_initialize);
 
 bool dquot_initialize_needed(struct inode *inode)
 {
-	struct dquot **dquots;
+	struct dquot __rcu **dquots;
 	int i;
 
 	if (!inode_quota_active(inode))
@@ -1600,13 +1608,14 @@ EXPORT_SYMBOL(dquot_initialize_needed);
 static void __dquot_drop(struct inode *inode)
 {
 	int cnt;
-	struct dquot **dquots = i_dquot(inode);
+	struct dquot __rcu **dquots = i_dquot(inode);
 	struct dquot *put[MAXQUOTAS];
 
 	spin_lock(&dq_data_lock);
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		put[cnt] = dquots[cnt];
-		dquots[cnt] = NULL;
+		put[cnt] = srcu_dereference_check(dquots[cnt], &dquot_srcu,
+					lockdep_is_held(&dq_data_lock));
+		rcu_assign_pointer(dquots[cnt], NULL);
 	}
 	spin_unlock(&dq_data_lock);
 	dqput_all(put);
@@ -1614,7 +1623,7 @@ static void __dquot_drop(struct inode *inode)
 
 void dquot_drop(struct inode *inode)
 {
-	struct dquot * const *dquots;
+	struct dquot __rcu * const *dquots;
 	int cnt;
 
 	if (IS_NOQUOTA(inode))
@@ -1687,7 +1696,7 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags)
 	int cnt, ret = 0, index;
 	struct dquot_warn warn[MAXQUOTAS];
 	int reserve = flags & DQUOT_SPACE_RESERVE;
-	struct dquot **dquots;
+	struct dquot __rcu **dquots;
 	struct dquot *dquot;
 
 	if (!inode_quota_active(inode)) {
@@ -1757,7 +1766,7 @@ int dquot_alloc_inode(struct inode *inode)
 {
 	int cnt, ret = 0, index;
 	struct dquot_warn warn[MAXQUOTAS];
-	struct dquot * const *dquots;
+	struct dquot __rcu * const *dquots;
 	struct dquot *dquot;
 
 	if (!inode_quota_active(inode))
@@ -1802,7 +1811,7 @@ EXPORT_SYMBOL(dquot_alloc_inode);
  */
 int dquot_claim_space_nodirty(struct inode *inode, qsize_t number)
 {
-	struct dquot **dquots;
+	struct dquot __rcu **dquots;
 	struct dquot *dquot;
 	int cnt, index;
 
@@ -1844,7 +1853,7 @@ EXPORT_SYMBOL(dquot_claim_space_nodirty);
  */
 void dquot_reclaim_space_nodirty(struct inode *inode, qsize_t number)
 {
-	struct dquot **dquots;
+	struct dquot __rcu **dquots;
 	struct dquot *dquot;
 	int cnt, index;
 
@@ -1888,7 +1897,7 @@ void __dquot_free_space(struct inode *inode, qsize_t number, int flags)
 {
 	unsigned int cnt;
 	struct dquot_warn warn[MAXQUOTAS];
-	struct dquot **dquots;
+	struct dquot __rcu **dquots;
 	struct dquot *dquot;
 	int reserve = flags & DQUOT_SPACE_RESERVE, index;
 
@@ -1945,7 +1954,7 @@ void dquot_free_inode(struct inode *inode)
 {
 	unsigned int cnt;
 	struct dquot_warn warn[MAXQUOTAS];
-	struct dquot * const *dquots;
+	struct dquot __rcu * const *dquots;
 	struct dquot *dquot;
 	int index;
 
@@ -1992,6 +2001,7 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 	qsize_t cur_space;
 	qsize_t rsv_space = 0;
 	qsize_t inode_usage = 1;
+	struct dquot __rcu **dquots;
 	struct dquot *transfer_from[MAXQUOTAS] = {};
 	int cnt, index, ret = 0;
 	char is_valid[MAXQUOTAS] = {};
@@ -2024,6 +2034,7 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 	}
 	cur_space = __inode_get_bytes(inode);
 	rsv_space = __inode_get_rsv_space(inode);
+	dquots = i_dquot(inode);
 	/*
 	 * Build the transfer_from list, check limits, and update usage in
 	 * the target structures.
@@ -2038,7 +2049,8 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 		if (!sb_has_quota_active(inode->i_sb, cnt))
 			continue;
 		is_valid[cnt] = 1;
-		transfer_from[cnt] = i_dquot(inode)[cnt];
+		transfer_from[cnt] = srcu_dereference_check(dquots[cnt],
+				&dquot_srcu, lockdep_is_held(&dq_data_lock));
 		ret = dquot_add_inodes(transfer_to[cnt], inode_usage,
 				       &warn_to[cnt]);
 		if (ret)
@@ -2077,7 +2089,7 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 						  rsv_space);
 			spin_unlock(&transfer_from[cnt]->dq_dqb_lock);
 		}
-		i_dquot(inode)[cnt] = transfer_to[cnt];
+		rcu_assign_pointer(dquots[cnt], transfer_to[cnt]);
 	}
 	spin_unlock(&inode->i_lock);
 	spin_unlock(&dq_data_lock);
@@ -2088,8 +2100,8 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 	 * mark_all_dquot_dirty().
 	 */
 	index = srcu_read_lock(&dquot_srcu);
-	mark_all_dquot_dirty(transfer_from);
-	mark_all_dquot_dirty(transfer_to);
+	mark_all_dquot_dirty((struct dquot __rcu **)transfer_from);
+	mark_all_dquot_dirty((struct dquot __rcu **)transfer_to);
 	srcu_read_unlock(&dquot_srcu, index);
 
 	flush_warnings(warn_to);
-- 
2.43.0

[PATCH 5.10 142/238] PCI: switchtec: Fix an error handling path in switchtec_pci_probe()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit dec529b0b0572b32f9eb91c882dd1f08ca657efb ]

The commit in Fixes changed the logic on how resources are released and
introduced a new switchtec_exit_pci() that need to be called explicitly in
order to undo a corresponding switchtec_init_pci().

This was done in the remove function, but not in the probe.

Fix the probe now.

Fixes: df25461119d9 ("PCI: switchtec: Fix stdev_release() crash after surprise hot remove")
Link: https://lore.kernel.org/r/01446d2ccb91a578239915812f2b7dfbeb2882af.1703428183.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/switch/switchtec.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c
index 5cea3ad290c54..9aa230c3208ab 100644
--- a/drivers/pci/switch/switchtec.c
+++ b/drivers/pci/switch/switchtec.c
@@ -1615,7 +1615,7 @@ static int switchtec_pci_probe(struct pci_dev *pdev,
 	rc = switchtec_init_isr(stdev);
 	if (rc) {
 		dev_err(&stdev->dev, "failed to init isr.\n");
-		goto err_put;
+		goto err_exit_pci;
 	}
 
 	iowrite32(SWITCHTEC_EVENT_CLEAR |
@@ -1636,6 +1636,8 @@ static int switchtec_pci_probe(struct pci_dev *pdev,
 
 err_devadd:
 	stdev_kill(stdev);
+err_exit_pci:
+	switchtec_exit_pci(stdev);
 err_put:
 	ida_simple_remove(&switchtec_minor_ida, MINOR(stdev->dev.devt));
 	put_device(&stdev->dev);
-- 
2.43.0

[PATCH 5.10 143/238] crypto: xilinx - call finalize with bh disabled

[Sasha Levin]

From: Quanyang Wang <quanyang.wang@windriver.com>

[ Upstream commit a853450bf4c752e664abab0b2fad395b7ad7701c ]

When calling crypto_finalize_request, BH should be disabled to avoid
triggering the following calltrace:

    ------------[ cut here ]------------
    WARNING: CPU: 2 PID: 74 at crypto/crypto_engine.c:58 crypto_finalize_request+0xa0/0x118
    Modules linked in: cryptodev(O)
    CPU: 2 PID: 74 Comm: firmware:zynqmp Tainted: G           O       6.8.0-rc1-yocto-standard #323
    Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
    pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
    pc : crypto_finalize_request+0xa0/0x118
    lr : crypto_finalize_request+0x104/0x118
    sp : ffffffc085353ce0
    x29: ffffffc085353ce0 x28: 0000000000000000 x27: ffffff8808ea8688
    x26: ffffffc081715038 x25: 0000000000000000 x24: ffffff880100db00
    x23: ffffff880100da80 x22: 0000000000000000 x21: 0000000000000000
    x20: ffffff8805b14000 x19: ffffff880100da80 x18: 0000000000010450
    x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
    x14: 0000000000000003 x13: 0000000000000000 x12: ffffff880100dad0
    x11: 0000000000000000 x10: ffffffc0832dcd08 x9 : ffffffc0812416d8
    x8 : 00000000000001f4 x7 : ffffffc0830d2830 x6 : 0000000000000001
    x5 : ffffffc082091000 x4 : ffffffc082091658 x3 : 0000000000000000
    x2 : ffffffc7f9653000 x1 : 0000000000000000 x0 : ffffff8802d20000
    Call trace:
     crypto_finalize_request+0xa0/0x118
     crypto_finalize_aead_request+0x18/0x30
     zynqmp_handle_aes_req+0xcc/0x388
     crypto_pump_work+0x168/0x2d8
     kthread_worker_fn+0xfc/0x3a0
     kthread+0x118/0x138
     ret_from_fork+0x10/0x20
    irq event stamp: 40
    hardirqs last  enabled at (39): [<ffffffc0812416f8>] _raw_spin_unlock_irqrestore+0x70/0xb0
    hardirqs last disabled at (40): [<ffffffc08122d208>] el1_dbg+0x28/0x90
    softirqs last  enabled at (36): [<ffffffc080017dec>] kernel_neon_begin+0x8c/0xf0
    softirqs last disabled at (34): [<ffffffc080017dc0>] kernel_neon_begin+0x60/0xf0
    ---[ end trace 0000000000000000 ]---

Fixes: 4d96f7d48131 ("crypto: xilinx - Add Xilinx AES driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/xilinx/zynqmp-aes-gcm.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/crypto/xilinx/zynqmp-aes-gcm.c b/drivers/crypto/xilinx/zynqmp-aes-gcm.c
index bf1f421e05f25..74bd3eb63734d 100644
--- a/drivers/crypto/xilinx/zynqmp-aes-gcm.c
+++ b/drivers/crypto/xilinx/zynqmp-aes-gcm.c
@@ -231,7 +231,10 @@ static int zynqmp_handle_aes_req(struct crypto_engine *engine,
 		err = zynqmp_aes_aead_cipher(areq);
 	}
 
+	local_bh_disable();
 	crypto_finalize_aead_request(engine, areq, err);
+	local_bh_enable();
+
 	return 0;
 }
 
-- 
2.43.0

[PATCH 5.10 144/238] perf thread_map: Free strlist on normal path in thread_map__new_by_tid_str()

[Sasha Levin]

From: Yang Jihong <yangjihong1@huawei.com>

[ Upstream commit 1eb3d924e3c0b8c27388b0583a989d757866efb6 ]

slist needs to be freed in both error path and normal path in
thread_map__new_by_tid_str().

Fixes: b52956c961be3a04 ("perf tools: Allow multiple threads or processes in record, stat, top")
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-6-yangjihong1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/thread_map.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/thread_map.c b/tools/perf/util/thread_map.c
index c9bfe4696943b..cee7fc3b5bb0c 100644
--- a/tools/perf/util/thread_map.c
+++ b/tools/perf/util/thread_map.c
@@ -279,13 +279,13 @@ struct perf_thread_map *thread_map__new_by_tid_str(const char *tid_str)
 		threads->nr = ntasks;
 	}
 out:
+	strlist__delete(slist);
 	if (threads)
 		refcount_set(&threads->refcnt, 1);
 	return threads;
 
 out_free_threads:
 	zfree(&threads);
-	strlist__delete(slist);
 	goto out;
 }
 
-- 
2.43.0

[PATCH 5.10 145/238] drm/radeon/ni: Fix wrong firmware size logging in ni_init_microcode()

[Sasha Levin]

From: Nikita Zhandarovich <n.zhandarovich@fintech.ru>

[ Upstream commit c4891d979c7668b195a0a75787967ec95a24ecef ]

Clean up a typo in pr_err() erroneously printing NI MC 'rdev->mc_fw->size'
during SMC firmware load. Log 'rdev->smc_fw->size' instead.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: 6596afd48af4 ("drm/radeon/kms: add dpm support for btc (v3)")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/ni.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index 02feb0801fd30..50c7430f8cd33 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -826,7 +826,7 @@ int ni_init_microcode(struct radeon_device *rdev)
 			err = 0;
 		} else if (rdev->smc_fw->size != smc_req_size) {
 			pr_err("ni_mc: Bogus length %zu in firmware \"%s\"\n",
-			       rdev->mc_fw->size, fw_name);
+			       rdev->smc_fw->size, fw_name);
 			err = -EINVAL;
 		}
 	}
-- 
2.43.0

[PATCH 5.10 146/238] ALSA: seq: fix function cast warnings

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit d7bf73809849463f76de42aad62c850305dd6c5d ]

clang-16 points out a control flow integrity (kcfi) issue when event
callbacks get converted to incompatible types:

sound/core/seq/seq_midi.c:135:30: error: cast from 'int (*)(struct snd_rawmidi_substream *, const char *, int)' to 'snd_seq_dump_func_t' (aka 'int (*)(void *, void *, int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
  135 |                 snd_seq_dump_var_event(ev, (snd_seq_dump_func_t)dump_midi, substream);
      |                                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/core/seq/seq_virmidi.c:83:31: error: cast from 'int (*)(struct snd_rawmidi_substream *, const unsigned char *, int)' to 'snd_seq_dump_func_t' (aka 'int (*)(void *, void *, int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
   83 |                         snd_seq_dump_var_event(ev, (snd_seq_dump_func_t)snd_rawmidi_receive, vmidi->substream);
      |                                                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

For addressing those errors, introduce wrapper functions that are used
for callbacks and bridge to the actual function call with pointer
cast.

The code was originally added with the initial ALSA merge in linux-2.5.4.

[ the patch description shamelessly copied from Arnd's original patch
  -- tiwai ]

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240213101020.459183-1-arnd@kernel.org
Link: https://lore.kernel.org/r/20240213135343.16411-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/seq/seq_midi.c    | 8 +++++++-
 sound/core/seq/seq_virmidi.c | 9 ++++++++-
 2 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/sound/core/seq/seq_midi.c b/sound/core/seq/seq_midi.c
index 6825940ea2cf8..a741d1ae6639a 100644
--- a/sound/core/seq/seq_midi.c
+++ b/sound/core/seq/seq_midi.c
@@ -111,6 +111,12 @@ static int dump_midi(struct snd_rawmidi_substream *substream, const char *buf, i
 	return 0;
 }
 
+/* callback for snd_seq_dump_var_event(), bridging to dump_midi() */
+static int __dump_midi(void *ptr, void *buf, int count)
+{
+	return dump_midi(ptr, buf, count);
+}
+
 static int event_process_midi(struct snd_seq_event *ev, int direct,
 			      void *private_data, int atomic, int hop)
 {
@@ -130,7 +136,7 @@ static int event_process_midi(struct snd_seq_event *ev, int direct,
 			pr_debug("ALSA: seq_midi: invalid sysex event flags = 0x%x\n", ev->flags);
 			return 0;
 		}
-		snd_seq_dump_var_event(ev, (snd_seq_dump_func_t)dump_midi, substream);
+		snd_seq_dump_var_event(ev, __dump_midi, substream);
 		snd_midi_event_reset_decode(msynth->parser);
 	} else {
 		if (msynth->parser == NULL)
diff --git a/sound/core/seq/seq_virmidi.c b/sound/core/seq/seq_virmidi.c
index 77d7037d1476f..82396b8c885a5 100644
--- a/sound/core/seq/seq_virmidi.c
+++ b/sound/core/seq/seq_virmidi.c
@@ -62,6 +62,13 @@ static void snd_virmidi_init_event(struct snd_virmidi *vmidi,
 /*
  * decode input event and put to read buffer of each opened file
  */
+
+/* callback for snd_seq_dump_var_event(), bridging to snd_rawmidi_receive() */
+static int dump_to_rawmidi(void *ptr, void *buf, int count)
+{
+	return snd_rawmidi_receive(ptr, buf, count);
+}
+
 static int snd_virmidi_dev_receive_event(struct snd_virmidi_dev *rdev,
 					 struct snd_seq_event *ev,
 					 bool atomic)
@@ -80,7 +87,7 @@ static int snd_virmidi_dev_receive_event(struct snd_virmidi_dev *rdev,
 		if (ev->type == SNDRV_SEQ_EVENT_SYSEX) {
 			if ((ev->flags & SNDRV_SEQ_EVENT_LENGTH_MASK) != SNDRV_SEQ_EVENT_LENGTH_VARIABLE)
 				continue;
-			snd_seq_dump_var_event(ev, (snd_seq_dump_func_t)snd_rawmidi_receive, vmidi->substream);
+			snd_seq_dump_var_event(ev, dump_to_rawmidi, vmidi->substream);
 			snd_midi_event_reset_decode(vmidi->parser);
 		} else {
 			len = snd_midi_event_decode(vmidi->parser, msg, sizeof(msg), ev);
-- 
2.43.0

[PATCH 5.10 147/238] perf stat: Avoid metric-only segv

[Sasha Levin]

From: Ian Rogers <irogers@google.com>

[ Upstream commit 2543947c77e0e224bda86b4e7220c2f6714da463 ]

Cycles is recognized as part of a hard coded metric in stat-shadow.c,
it may call print_metric_only with a NULL fmt string leading to a
segfault. Handle the NULL fmt explicitly.

Fixes: 088519f318be ("perf stat: Move the display functions to stat-display.c")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240209204947.3873294-4-irogers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/stat-display.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/stat-display.c b/tools/perf/util/stat-display.c
index 4688e39de52af..971fd77bd3e61 100644
--- a/tools/perf/util/stat-display.c
+++ b/tools/perf/util/stat-display.c
@@ -271,7 +271,7 @@ static void print_metric_only(struct perf_stat_config *config,
 	if (color)
 		mlen += strlen(color) + sizeof(PERF_COLOR_RESET) - 1;
 
-	color_snprintf(str, sizeof(str), color ?: "", fmt, val);
+	color_snprintf(str, sizeof(str), color ?: "", fmt ?: "", val);
 	fprintf(out, "%*s ", mlen, str);
 }
 
-- 
2.43.0

[PATCH 5.10 148/238] ASoC: meson: Use dev_err_probe() helper

[Sasha Levin]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

[ Upstream commit 2ff4e003e8e105fb65c682c876a5cb0e00f854bf ]

Use the dev_err_probe() helper, instead of open-coding the same
operation.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-17-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 98ac85a00f31 ("ASoC: meson: aiu: fix function pointer type mismatch")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/aiu.c               | 36 +++++++--------------
 sound/soc/meson/axg-fifo.c          | 16 +++------
 sound/soc/meson/axg-pdm.c           | 25 ++++-----------
 sound/soc/meson/axg-spdifin.c       | 17 +++-------
 sound/soc/meson/axg-spdifout.c      | 17 +++-------
 sound/soc/meson/axg-tdm-formatter.c | 50 ++++++++---------------------
 sound/soc/meson/axg-tdm-interface.c | 25 ++++-----------
 sound/soc/meson/meson-card-utils.c  |  8 ++---
 sound/soc/meson/t9015.c             | 14 +++-----
 9 files changed, 56 insertions(+), 152 deletions(-)

diff --git a/sound/soc/meson/aiu.c b/sound/soc/meson/aiu.c
index dc35ca79021c5..386a31a044700 100644
--- a/sound/soc/meson/aiu.c
+++ b/sound/soc/meson/aiu.c
@@ -218,34 +218,23 @@ static int aiu_clk_get(struct device *dev)
 	int ret;
 
 	aiu->pclk = devm_clk_get(dev, "pclk");
-	if (IS_ERR(aiu->pclk)) {
-		if (PTR_ERR(aiu->pclk) != -EPROBE_DEFER)
-			dev_err(dev, "Can't get the aiu pclk\n");
-		return PTR_ERR(aiu->pclk);
-	}
+	if (IS_ERR(aiu->pclk))
+		return dev_err_probe(dev, PTR_ERR(aiu->pclk), "Can't get the aiu pclk\n");
 
 	aiu->spdif_mclk = devm_clk_get(dev, "spdif_mclk");
-	if (IS_ERR(aiu->spdif_mclk)) {
-		if (PTR_ERR(aiu->spdif_mclk) != -EPROBE_DEFER)
-			dev_err(dev, "Can't get the aiu spdif master clock\n");
-		return PTR_ERR(aiu->spdif_mclk);
-	}
+	if (IS_ERR(aiu->spdif_mclk))
+		return dev_err_probe(dev, PTR_ERR(aiu->spdif_mclk),
+				     "Can't get the aiu spdif master clock\n");
 
 	ret = aiu_clk_bulk_get(dev, aiu_i2s_ids, ARRAY_SIZE(aiu_i2s_ids),
 			       &aiu->i2s);
-	if (ret) {
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "Can't get the i2s clocks\n");
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "Can't get the i2s clocks\n");
 
 	ret = aiu_clk_bulk_get(dev, aiu_spdif_ids, ARRAY_SIZE(aiu_spdif_ids),
 			       &aiu->spdif);
-	if (ret) {
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "Can't get the spdif clocks\n");
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "Can't get the spdif clocks\n");
 
 	ret = clk_prepare_enable(aiu->pclk);
 	if (ret) {
@@ -281,11 +270,8 @@ static int aiu_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, aiu);
 
 	ret = device_reset(dev);
-	if (ret) {
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "Failed to reset device\n");
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to reset device\n");
 
 	regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(regs))
diff --git a/sound/soc/meson/axg-fifo.c b/sound/soc/meson/axg-fifo.c
index b2e867113226b..295c0fc30745e 100644
--- a/sound/soc/meson/axg-fifo.c
+++ b/sound/soc/meson/axg-fifo.c
@@ -350,20 +350,12 @@ int axg_fifo_probe(struct platform_device *pdev)
 	}
 
 	fifo->pclk = devm_clk_get(dev, NULL);
-	if (IS_ERR(fifo->pclk)) {
-		if (PTR_ERR(fifo->pclk) != -EPROBE_DEFER)
-			dev_err(dev, "failed to get pclk: %ld\n",
-				PTR_ERR(fifo->pclk));
-		return PTR_ERR(fifo->pclk);
-	}
+	if (IS_ERR(fifo->pclk))
+		return dev_err_probe(dev, PTR_ERR(fifo->pclk), "failed to get pclk\n");
 
 	fifo->arb = devm_reset_control_get_exclusive(dev, NULL);
-	if (IS_ERR(fifo->arb)) {
-		if (PTR_ERR(fifo->arb) != -EPROBE_DEFER)
-			dev_err(dev, "failed to get arb reset: %ld\n",
-				PTR_ERR(fifo->arb));
-		return PTR_ERR(fifo->arb);
-	}
+	if (IS_ERR(fifo->arb))
+		return dev_err_probe(dev, PTR_ERR(fifo->arb), "failed to get arb reset\n");
 
 	fifo->irq = of_irq_get(dev->of_node, 0);
 	if (fifo->irq <= 0) {
diff --git a/sound/soc/meson/axg-pdm.c b/sound/soc/meson/axg-pdm.c
index bfd37d49a73ef..672e43a9729dc 100644
--- a/sound/soc/meson/axg-pdm.c
+++ b/sound/soc/meson/axg-pdm.c
@@ -586,7 +586,6 @@ static int axg_pdm_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct axg_pdm *priv;
 	void __iomem *regs;
-	int ret;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -611,28 +610,16 @@ static int axg_pdm_probe(struct platform_device *pdev)
 	}
 
 	priv->pclk = devm_clk_get(dev, "pclk");
-	if (IS_ERR(priv->pclk)) {
-		ret = PTR_ERR(priv->pclk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to get pclk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(priv->pclk))
+		return dev_err_probe(dev, PTR_ERR(priv->pclk), "failed to get pclk\n");
 
 	priv->dclk = devm_clk_get(dev, "dclk");
-	if (IS_ERR(priv->dclk)) {
-		ret = PTR_ERR(priv->dclk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to get dclk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(priv->dclk))
+		return dev_err_probe(dev, PTR_ERR(priv->dclk), "failed to get dclk\n");
 
 	priv->sysclk = devm_clk_get(dev, "sysclk");
-	if (IS_ERR(priv->sysclk)) {
-		ret = PTR_ERR(priv->sysclk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to get dclk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(priv->sysclk))
+		return dev_err_probe(dev, PTR_ERR(priv->sysclk), "failed to get dclk\n");
 
 	return devm_snd_soc_register_component(dev, &axg_pdm_component_drv,
 					       &axg_pdm_dai_drv, 1);
diff --git a/sound/soc/meson/axg-spdifin.c b/sound/soc/meson/axg-spdifin.c
index 7aaded1fc376b..245189d2ee95f 100644
--- a/sound/soc/meson/axg-spdifin.c
+++ b/sound/soc/meson/axg-spdifin.c
@@ -439,7 +439,6 @@ static int axg_spdifin_probe(struct platform_device *pdev)
 	struct axg_spdifin *priv;
 	struct snd_soc_dai_driver *dai_drv;
 	void __iomem *regs;
-	int ret;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -464,20 +463,12 @@ static int axg_spdifin_probe(struct platform_device *pdev)
 	}
 
 	priv->pclk = devm_clk_get(dev, "pclk");
-	if (IS_ERR(priv->pclk)) {
-		ret = PTR_ERR(priv->pclk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to get pclk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(priv->pclk))
+		return dev_err_probe(dev, PTR_ERR(priv->pclk), "failed to get pclk\n");
 
 	priv->refclk = devm_clk_get(dev, "refclk");
-	if (IS_ERR(priv->refclk)) {
-		ret = PTR_ERR(priv->refclk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to get mclk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(priv->refclk))
+		return dev_err_probe(dev, PTR_ERR(priv->refclk), "failed to get mclk\n");
 
 	dai_drv = axg_spdifin_get_dai_drv(dev, priv);
 	if (IS_ERR(dai_drv)) {
diff --git a/sound/soc/meson/axg-spdifout.c b/sound/soc/meson/axg-spdifout.c
index e769a5ee6e27e..3960d082e1436 100644
--- a/sound/soc/meson/axg-spdifout.c
+++ b/sound/soc/meson/axg-spdifout.c
@@ -403,7 +403,6 @@ static int axg_spdifout_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct axg_spdifout *priv;
 	void __iomem *regs;
-	int ret;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -422,20 +421,12 @@ static int axg_spdifout_probe(struct platform_device *pdev)
 	}
 
 	priv->pclk = devm_clk_get(dev, "pclk");
-	if (IS_ERR(priv->pclk)) {
-		ret = PTR_ERR(priv->pclk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to get pclk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(priv->pclk))
+		return dev_err_probe(dev, PTR_ERR(priv->pclk), "failed to get pclk\n");
 
 	priv->mclk = devm_clk_get(dev, "mclk");
-	if (IS_ERR(priv->mclk)) {
-		ret = PTR_ERR(priv->mclk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to get mclk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(priv->mclk))
+		return dev_err_probe(dev, PTR_ERR(priv->mclk), "failed to get mclk\n");
 
 	return devm_snd_soc_register_component(dev, &axg_spdifout_component_drv,
 			axg_spdifout_dai_drv, ARRAY_SIZE(axg_spdifout_dai_drv));
diff --git a/sound/soc/meson/axg-tdm-formatter.c b/sound/soc/meson/axg-tdm-formatter.c
index 4834cfd163c03..63333a2b0a9c3 100644
--- a/sound/soc/meson/axg-tdm-formatter.c
+++ b/sound/soc/meson/axg-tdm-formatter.c
@@ -265,7 +265,6 @@ int axg_tdm_formatter_probe(struct platform_device *pdev)
 	const struct axg_tdm_formatter_driver *drv;
 	struct axg_tdm_formatter *formatter;
 	void __iomem *regs;
-	int ret;
 
 	drv = of_device_get_match_data(dev);
 	if (!drv) {
@@ -292,57 +291,34 @@ int axg_tdm_formatter_probe(struct platform_device *pdev)
 
 	/* Peripharal clock */
 	formatter->pclk = devm_clk_get(dev, "pclk");
-	if (IS_ERR(formatter->pclk)) {
-		ret = PTR_ERR(formatter->pclk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to get pclk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(formatter->pclk))
+		return dev_err_probe(dev, PTR_ERR(formatter->pclk), "failed to get pclk\n");
 
 	/* Formatter bit clock */
 	formatter->sclk = devm_clk_get(dev, "sclk");
-	if (IS_ERR(formatter->sclk)) {
-		ret = PTR_ERR(formatter->sclk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to get sclk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(formatter->sclk))
+		return dev_err_probe(dev, PTR_ERR(formatter->sclk), "failed to get sclk\n");
 
 	/* Formatter sample clock */
 	formatter->lrclk = devm_clk_get(dev, "lrclk");
-	if (IS_ERR(formatter->lrclk)) {
-		ret = PTR_ERR(formatter->lrclk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to get lrclk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(formatter->lrclk))
+		return dev_err_probe(dev, PTR_ERR(formatter->lrclk), "failed to get lrclk\n");
 
 	/* Formatter bit clock input multiplexer */
 	formatter->sclk_sel = devm_clk_get(dev, "sclk_sel");
-	if (IS_ERR(formatter->sclk_sel)) {
-		ret = PTR_ERR(formatter->sclk_sel);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to get sclk_sel: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(formatter->sclk_sel))
+		return dev_err_probe(dev, PTR_ERR(formatter->sclk_sel), "failed to get sclk_sel\n");
 
 	/* Formatter sample clock input multiplexer */
 	formatter->lrclk_sel = devm_clk_get(dev, "lrclk_sel");
-	if (IS_ERR(formatter->lrclk_sel)) {
-		ret = PTR_ERR(formatter->lrclk_sel);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to get lrclk_sel: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(formatter->lrclk_sel))
+		return dev_err_probe(dev, PTR_ERR(formatter->lrclk_sel),
+				     "failed to get lrclk_sel\n");
 
 	/* Formatter dedicated reset line */
 	formatter->reset = devm_reset_control_get_optional_exclusive(dev, NULL);
-	if (IS_ERR(formatter->reset)) {
-		ret = PTR_ERR(formatter->reset);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to get reset: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(formatter->reset))
+		return dev_err_probe(dev, PTR_ERR(formatter->reset), "failed to get reset\n");
 
 	return devm_snd_soc_register_component(dev, drv->component_drv,
 					       NULL, 0);
diff --git a/sound/soc/meson/axg-tdm-interface.c b/sound/soc/meson/axg-tdm-interface.c
index 87cac440b3693..e076ced300257 100644
--- a/sound/soc/meson/axg-tdm-interface.c
+++ b/sound/soc/meson/axg-tdm-interface.c
@@ -517,21 +517,13 @@ static int axg_tdm_iface_probe(struct platform_device *pdev)
 
 	/* Bit clock provided on the pad */
 	iface->sclk = devm_clk_get(dev, "sclk");
-	if (IS_ERR(iface->sclk)) {
-		ret = PTR_ERR(iface->sclk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to get sclk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(iface->sclk))
+		return dev_err_probe(dev, PTR_ERR(iface->sclk), "failed to get sclk\n");
 
 	/* Sample clock provided on the pad */
 	iface->lrclk = devm_clk_get(dev, "lrclk");
-	if (IS_ERR(iface->lrclk)) {
-		ret = PTR_ERR(iface->lrclk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to get lrclk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(iface->lrclk))
+		return dev_err_probe(dev, PTR_ERR(iface->lrclk), "failed to get lrclk\n");
 
 	/*
 	 * mclk maybe be missing when the cpu dai is in slave mode and
@@ -542,13 +534,10 @@ static int axg_tdm_iface_probe(struct platform_device *pdev)
 	iface->mclk = devm_clk_get(dev, "mclk");
 	if (IS_ERR(iface->mclk)) {
 		ret = PTR_ERR(iface->mclk);
-		if (ret == -ENOENT) {
+		if (ret == -ENOENT)
 			iface->mclk = NULL;
-		} else {
-			if (ret != -EPROBE_DEFER)
-				dev_err(dev, "failed to get mclk: %d\n", ret);
-			return ret;
-		}
+		else
+			return dev_err_probe(dev, ret, "failed to get mclk\n");
 	}
 
 	return devm_snd_soc_register_component(dev,
diff --git a/sound/soc/meson/meson-card-utils.c b/sound/soc/meson/meson-card-utils.c
index 300ac8be46ef8..0e2691f011b7b 100644
--- a/sound/soc/meson/meson-card-utils.c
+++ b/sound/soc/meson/meson-card-utils.c
@@ -85,11 +85,9 @@ int meson_card_parse_dai(struct snd_soc_card *card,
 
 	ret = of_parse_phandle_with_args(node, "sound-dai",
 					 "#sound-dai-cells", 0, &args);
-	if (ret) {
-		if (ret != -EPROBE_DEFER)
-			dev_err(card->dev, "can't parse dai %d\n", ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(card->dev, ret, "can't parse dai\n");
+
 	*dai_of_node = args.np;
 
 	return snd_soc_get_dai_name(&args, dai_name);
diff --git a/sound/soc/meson/t9015.c b/sound/soc/meson/t9015.c
index 56d2592c16d53..cb1eaf678fc3f 100644
--- a/sound/soc/meson/t9015.c
+++ b/sound/soc/meson/t9015.c
@@ -258,18 +258,12 @@ static int t9015_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, priv);
 
 	priv->pclk = devm_clk_get(dev, "pclk");
-	if (IS_ERR(priv->pclk)) {
-		if (PTR_ERR(priv->pclk) != -EPROBE_DEFER)
-			dev_err(dev, "failed to get core clock\n");
-		return PTR_ERR(priv->pclk);
-	}
+	if (IS_ERR(priv->pclk))
+		return dev_err_probe(dev, PTR_ERR(priv->pclk), "failed to get core clock\n");
 
 	priv->avdd = devm_regulator_get(dev, "AVDD");
-	if (IS_ERR(priv->avdd)) {
-		if (PTR_ERR(priv->avdd) != -EPROBE_DEFER)
-			dev_err(dev, "failed to AVDD\n");
-		return PTR_ERR(priv->avdd);
-	}
+	if (IS_ERR(priv->avdd))
+		return dev_err_probe(dev, PTR_ERR(priv->avdd), "failed to AVDD\n");
 
 	ret = clk_prepare_enable(priv->pclk);
 	if (ret) {
-- 
2.43.0

[PATCH 5.10 149/238] ASoC: meson: aiu: fix function pointer type mismatch

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit 98ac85a00f31d2e9d5452b825a9ed0153d934043 ]

clang-16 warns about casting functions to incompatible types, as is done
here to call clk_disable_unprepare:

sound/soc/meson/aiu.c:243:12: error: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
  243 |                                        (void(*)(void *))clk_disable_unprepare,

The pattern of getting, enabling and setting a disable callback for a
clock can be replaced with devm_clk_get_enabled(), which also fixes
this warning.

Fixes: 6ae9ca9ce986 ("ASoC: meson: aiu: add i2s and spdif support")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://msgid.link/r/20240213215807.3326688-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/aiu.c | 19 ++++---------------
 sound/soc/meson/aiu.h |  1 -
 2 files changed, 4 insertions(+), 16 deletions(-)

diff --git a/sound/soc/meson/aiu.c b/sound/soc/meson/aiu.c
index 386a31a044700..03bc3e5b6cab5 100644
--- a/sound/soc/meson/aiu.c
+++ b/sound/soc/meson/aiu.c
@@ -215,11 +215,12 @@ static const char * const aiu_spdif_ids[] = {
 static int aiu_clk_get(struct device *dev)
 {
 	struct aiu *aiu = dev_get_drvdata(dev);
+	struct clk *pclk;
 	int ret;
 
-	aiu->pclk = devm_clk_get(dev, "pclk");
-	if (IS_ERR(aiu->pclk))
-		return dev_err_probe(dev, PTR_ERR(aiu->pclk), "Can't get the aiu pclk\n");
+	pclk = devm_clk_get_enabled(dev, "pclk");
+	if (IS_ERR(pclk))
+		return dev_err_probe(dev, PTR_ERR(pclk), "Can't get the aiu pclk\n");
 
 	aiu->spdif_mclk = devm_clk_get(dev, "spdif_mclk");
 	if (IS_ERR(aiu->spdif_mclk))
@@ -236,18 +237,6 @@ static int aiu_clk_get(struct device *dev)
 	if (ret)
 		return dev_err_probe(dev, ret, "Can't get the spdif clocks\n");
 
-	ret = clk_prepare_enable(aiu->pclk);
-	if (ret) {
-		dev_err(dev, "peripheral clock enable failed\n");
-		return ret;
-	}
-
-	ret = devm_add_action_or_reset(dev,
-				       (void(*)(void *))clk_disable_unprepare,
-				       aiu->pclk);
-	if (ret)
-		dev_err(dev, "failed to add reset action on pclk");
-
 	return ret;
 }
 
diff --git a/sound/soc/meson/aiu.h b/sound/soc/meson/aiu.h
index 87aa19ac4af3a..44f8c213d35a0 100644
--- a/sound/soc/meson/aiu.h
+++ b/sound/soc/meson/aiu.h
@@ -33,7 +33,6 @@ struct aiu_platform_data {
 };
 
 struct aiu {
-	struct clk *pclk;
 	struct clk *spdif_mclk;
 	struct aiu_interface i2s;
 	struct aiu_interface spdif;
-- 
2.43.0

[PATCH 5.10 150/238] ASoC: meson: t9015: fix function pointer type mismatch

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit 5ad992c71b6a8e8a547954addc7af9fbde6ca10a ]

clang-16 warns about casting functions to incompatible types, as is done
here to call clk_disable_unprepare:

sound/soc/meson/t9015.c:274:4: error: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
  274 |                         (void(*)(void *))clk_disable_unprepare,

The pattern of getting, enabling and setting a disable callback for a
clock can be replaced with devm_clk_get_enabled(), which also fixes
this warning.

Fixes: 33901f5b9b16 ("ASoC: meson: add t9015 internal DAC driver")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://msgid.link/r/20240213215807.3326688-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/t9015.c | 20 ++++----------------
 1 file changed, 4 insertions(+), 16 deletions(-)

diff --git a/sound/soc/meson/t9015.c b/sound/soc/meson/t9015.c
index cb1eaf678fc3f..b085aa65c688c 100644
--- a/sound/soc/meson/t9015.c
+++ b/sound/soc/meson/t9015.c
@@ -48,7 +48,6 @@
 #define POWER_CFG	0x10
 
 struct t9015 {
-	struct clk *pclk;
 	struct regulator *avdd;
 };
 
@@ -250,6 +249,7 @@ static int t9015_probe(struct platform_device *pdev)
 	struct t9015 *priv;
 	void __iomem *regs;
 	struct regmap *regmap;
+	struct clk *pclk;
 	int ret;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
@@ -257,26 +257,14 @@ static int t9015_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	platform_set_drvdata(pdev, priv);
 
-	priv->pclk = devm_clk_get(dev, "pclk");
-	if (IS_ERR(priv->pclk))
-		return dev_err_probe(dev, PTR_ERR(priv->pclk), "failed to get core clock\n");
+	pclk = devm_clk_get_enabled(dev, "pclk");
+	if (IS_ERR(pclk))
+		return dev_err_probe(dev, PTR_ERR(pclk), "failed to get core clock\n");
 
 	priv->avdd = devm_regulator_get(dev, "AVDD");
 	if (IS_ERR(priv->avdd))
 		return dev_err_probe(dev, PTR_ERR(priv->avdd), "failed to AVDD\n");
 
-	ret = clk_prepare_enable(priv->pclk);
-	if (ret) {
-		dev_err(dev, "core clock enable failed\n");
-		return ret;
-	}
-
-	ret = devm_add_action_or_reset(dev,
-			(void(*)(void *))clk_disable_unprepare,
-			priv->pclk);
-	if (ret)
-		return ret;
-
 	ret = device_reset(dev);
 	if (ret) {
 		dev_err(dev, "reset failed\n");
-- 
2.43.0

[PATCH 5.10 151/238] media: sun8i-di: Fix coefficient writes

[Sasha Levin]

From: Jernej Skrabec <jernej.skrabec@gmail.com>

[ Upstream commit 794b581f8c6eb7b60fe468ccb96dd3cd38ff779f ]

Currently coefficients are applied only once, since they don't change.
However, this is done before enable bit is set and thus it doesn't get
applied properly.

Fix that by applying coefficients after enable bit is set. While this
means that it will be done evey time, it doesn't bring much time
penalty.

Fixes: a4260ea49547 ("media: sun4i: Add H3 deinterlace driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../media/platform/sunxi/sun8i-di/sun8i-di.c  | 42 +++++++++----------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c b/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c
index 2c159483c56ba..a9d3272940be0 100644
--- a/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c
+++ b/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c
@@ -66,6 +66,7 @@ static void deinterlace_device_run(void *priv)
 	struct vb2_v4l2_buffer *src, *dst;
 	unsigned int hstep, vstep;
 	dma_addr_t addr;
+	int i;
 
 	src = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
 	dst = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
@@ -160,6 +161,26 @@ static void deinterlace_device_run(void *priv)
 	deinterlace_write(dev, DEINTERLACE_CH1_HORZ_FACT, hstep);
 	deinterlace_write(dev, DEINTERLACE_CH1_VERT_FACT, vstep);
 
+	/* neutral filter coefficients */
+	deinterlace_set_bits(dev, DEINTERLACE_FRM_CTRL,
+			     DEINTERLACE_FRM_CTRL_COEF_ACCESS);
+	readl_poll_timeout(dev->base + DEINTERLACE_STATUS, val,
+			   val & DEINTERLACE_STATUS_COEF_STATUS, 2, 40);
+
+	for (i = 0; i < 32; i++) {
+		deinterlace_write(dev, DEINTERLACE_CH0_HORZ_COEF0 + i * 4,
+				  DEINTERLACE_IDENTITY_COEF);
+		deinterlace_write(dev, DEINTERLACE_CH0_VERT_COEF + i * 4,
+				  DEINTERLACE_IDENTITY_COEF);
+		deinterlace_write(dev, DEINTERLACE_CH1_HORZ_COEF0 + i * 4,
+				  DEINTERLACE_IDENTITY_COEF);
+		deinterlace_write(dev, DEINTERLACE_CH1_VERT_COEF + i * 4,
+				  DEINTERLACE_IDENTITY_COEF);
+	}
+
+	deinterlace_clr_set_bits(dev, DEINTERLACE_FRM_CTRL,
+				 DEINTERLACE_FRM_CTRL_COEF_ACCESS, 0);
+
 	deinterlace_clr_set_bits(dev, DEINTERLACE_FIELD_CTRL,
 				 DEINTERLACE_FIELD_CTRL_FIELD_CNT_MSK,
 				 DEINTERLACE_FIELD_CTRL_FIELD_CNT(ctx->field));
@@ -248,7 +269,6 @@ static irqreturn_t deinterlace_irq(int irq, void *data)
 static void deinterlace_init(struct deinterlace_dev *dev)
 {
 	u32 val;
-	int i;
 
 	deinterlace_write(dev, DEINTERLACE_BYPASS,
 			  DEINTERLACE_BYPASS_CSC);
@@ -285,26 +305,6 @@ static void deinterlace_init(struct deinterlace_dev *dev)
 	deinterlace_clr_set_bits(dev, DEINTERLACE_CHROMA_DIFF,
 				 DEINTERLACE_CHROMA_DIFF_TH_MSK,
 				 DEINTERLACE_CHROMA_DIFF_TH(5));
-
-	/* neutral filter coefficients */
-	deinterlace_set_bits(dev, DEINTERLACE_FRM_CTRL,
-			     DEINTERLACE_FRM_CTRL_COEF_ACCESS);
-	readl_poll_timeout(dev->base + DEINTERLACE_STATUS, val,
-			   val & DEINTERLACE_STATUS_COEF_STATUS, 2, 40);
-
-	for (i = 0; i < 32; i++) {
-		deinterlace_write(dev, DEINTERLACE_CH0_HORZ_COEF0 + i * 4,
-				  DEINTERLACE_IDENTITY_COEF);
-		deinterlace_write(dev, DEINTERLACE_CH0_VERT_COEF + i * 4,
-				  DEINTERLACE_IDENTITY_COEF);
-		deinterlace_write(dev, DEINTERLACE_CH1_HORZ_COEF0 + i * 4,
-				  DEINTERLACE_IDENTITY_COEF);
-		deinterlace_write(dev, DEINTERLACE_CH1_VERT_COEF + i * 4,
-				  DEINTERLACE_IDENTITY_COEF);
-	}
-
-	deinterlace_clr_set_bits(dev, DEINTERLACE_FRM_CTRL,
-				 DEINTERLACE_FRM_CTRL_COEF_ACCESS, 0);
 }
 
 static inline struct deinterlace_ctx *deinterlace_file2ctx(struct file *file)
-- 
2.43.0

[PATCH 5.10 152/238] media: sun8i-di: Fix power on/off sequences

[Sasha Levin]

From: Jernej Skrabec <jernej.skrabec@gmail.com>

[ Upstream commit cff104e33bad38f4b2c8d58816a7accfaa2879f9 ]

According to user manual, reset line should be deasserted before clocks
are enabled. Also fix power down sequence to be reverse of that.

Fixes: a4260ea49547 ("media: sun4i: Add H3 deinterlace driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../media/platform/sunxi/sun8i-di/sun8i-di.c  | 25 ++++++++++---------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c b/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c
index a9d3272940be0..cb6d32c59191f 100644
--- a/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c
+++ b/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c
@@ -937,11 +937,18 @@ static int deinterlace_runtime_resume(struct device *device)
 		return ret;
 	}
 
+	ret = reset_control_deassert(dev->rstc);
+	if (ret) {
+		dev_err(dev->dev, "Failed to apply reset\n");
+
+		goto err_exclusive_rate;
+	}
+
 	ret = clk_prepare_enable(dev->bus_clk);
 	if (ret) {
 		dev_err(dev->dev, "Failed to enable bus clock\n");
 
-		goto err_exclusive_rate;
+		goto err_rst;
 	}
 
 	ret = clk_prepare_enable(dev->mod_clk);
@@ -958,23 +965,16 @@ static int deinterlace_runtime_resume(struct device *device)
 		goto err_mod_clk;
 	}
 
-	ret = reset_control_deassert(dev->rstc);
-	if (ret) {
-		dev_err(dev->dev, "Failed to apply reset\n");
-
-		goto err_ram_clk;
-	}
-
 	deinterlace_init(dev);
 
 	return 0;
 
-err_ram_clk:
-	clk_disable_unprepare(dev->ram_clk);
 err_mod_clk:
 	clk_disable_unprepare(dev->mod_clk);
 err_bus_clk:
 	clk_disable_unprepare(dev->bus_clk);
+err_rst:
+	reset_control_assert(dev->rstc);
 err_exclusive_rate:
 	clk_rate_exclusive_put(dev->mod_clk);
 
@@ -985,11 +985,12 @@ static int deinterlace_runtime_suspend(struct device *device)
 {
 	struct deinterlace_dev *dev = dev_get_drvdata(device);
 
-	reset_control_assert(dev->rstc);
-
 	clk_disable_unprepare(dev->ram_clk);
 	clk_disable_unprepare(dev->mod_clk);
 	clk_disable_unprepare(dev->bus_clk);
+
+	reset_control_assert(dev->rstc);
+
 	clk_rate_exclusive_put(dev->mod_clk);
 
 	return 0;
-- 
2.43.0

[PATCH 5.10 153/238] media: sun8i-di: Fix chroma difference threshold

[Sasha Levin]

From: Jernej Skrabec <jernej.skrabec@gmail.com>

[ Upstream commit 856525e8db272b0ce6d9c6e6c2eeb97892b485a6 ]

While there is no good explanation what this value does, vendor driver
uses value 31 for it. Align driver with it.

Fixes: a4260ea49547 ("media: sun4i: Add H3 deinterlace driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/sunxi/sun8i-di/sun8i-di.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c b/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c
index cb6d32c59191f..f0d2bcbe20b0d 100644
--- a/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c
+++ b/drivers/media/platform/sunxi/sun8i-di/sun8i-di.c
@@ -304,7 +304,7 @@ static void deinterlace_init(struct deinterlace_dev *dev)
 
 	deinterlace_clr_set_bits(dev, DEINTERLACE_CHROMA_DIFF,
 				 DEINTERLACE_CHROMA_DIFF_TH_MSK,
-				 DEINTERLACE_CHROMA_DIFF_TH(5));
+				 DEINTERLACE_CHROMA_DIFF_TH(31));
 }
 
 static inline struct deinterlace_ctx *deinterlace_file2ctx(struct file *file)
-- 
2.43.0

[PATCH 5.10 154/238] media: imx: csc/scaler: fix v4l2_ctrl_handler memory leak

[Sasha Levin]

From: Lucas Stach <l.stach@pengutronix.de>

[ Upstream commit 4797a3dd46f220e6d83daf54d70c5b33db6deb01 ]

Free the memory allocated in v4l2_ctrl_handler_init on release.

Fixes: a8ef0488cc59 ("media: imx: add csc/scaler mem2mem device")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/imx/imx-media-csc-scaler.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/staging/media/imx/imx-media-csc-scaler.c b/drivers/staging/media/imx/imx-media-csc-scaler.c
index 63a0204502a8b..939843b895440 100644
--- a/drivers/staging/media/imx/imx-media-csc-scaler.c
+++ b/drivers/staging/media/imx/imx-media-csc-scaler.c
@@ -803,6 +803,7 @@ static int ipu_csc_scaler_release(struct file *file)
 
 	dev_dbg(priv->dev, "Releasing instance %p\n", ctx);
 
+	v4l2_ctrl_handler_free(&ctx->ctrl_hdlr);
 	v4l2_m2m_ctx_release(ctx->fh.m2m_ctx);
 	v4l2_fh_del(&ctx->fh);
 	v4l2_fh_exit(&ctx->fh);
-- 
2.43.0

[PATCH 5.10 155/238] media: go7007: add check of return value of go7007_read_addr()

[Sasha Levin]

From: Daniil Dulov <d.dulov@aladdin.ru>

[ Upstream commit 0b70530ee740861f4776ff724fcc25023df1799a ]

If go7007_read_addr() returns error channel is not assigned a value.
In this case go to allocfail.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 866b8695d67e ("Staging: add the go7007 video driver")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/go7007/go7007-usb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/usb/go7007/go7007-usb.c b/drivers/media/usb/go7007/go7007-usb.c
index eeb85981e02b6..762c13e49bfa5 100644
--- a/drivers/media/usb/go7007/go7007-usb.c
+++ b/drivers/media/usb/go7007/go7007-usb.c
@@ -1201,7 +1201,9 @@ static int go7007_usb_probe(struct usb_interface *intf,
 				u16 channel;
 
 				/* read channel number from GPIO[1:0] */
-				go7007_read_addr(go, 0x3c81, &channel);
+				if (go7007_read_addr(go, 0x3c81, &channel))
+					goto allocfail;
+
 				channel &= 0x3;
 				go->board_id = GO7007_BOARDID_ADLINK_MPG24;
 				usb->board = board = &board_adlink_mpg24;
-- 
2.43.0

[PATCH 5.10 156/238] media: pvrusb2: remove redundant NULL check

[Sasha Levin]

From: Daniil Dulov <d.dulov@aladdin.ru>

[ Upstream commit 95ac1210fb2753f968ebce0730d4fbc553c2a3dc ]

Pointer dip->stream cannot be NULL due to a shift, thus remove redundant
NULL check.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: c74e0062684b ("V4L/DVB (5059): Pvrusb2: Be smarter about mode restoration")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/pvrusb2/pvrusb2-v4l2.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
index 9657c18833116..c872868becbdc 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
@@ -1202,11 +1202,6 @@ static void pvr2_v4l2_dev_init(struct pvr2_v4l2_dev *dip,
 		dip->minor_type = pvr2_v4l_type_video;
 		nr_ptr = video_nr;
 		caps |= V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_AUDIO;
-		if (!dip->stream) {
-			pr_err(KBUILD_MODNAME
-				": Failed to set up pvrusb2 v4l video dev due to missing stream instance\n");
-			return;
-		}
 		break;
 	case VFL_TYPE_VBI:
 		dip->config = pvr2_config_vbi;
-- 
2.43.0

[PATCH 5.10 157/238] media: pvrusb2: fix pvr2_stream_callback casts

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 30baa4a96b23add91a87305baaeba82c4e109e1f ]

clang-16 complains about a control flow integrity (KCFI) issue in pvrusb2,
which casts three different prototypes into pvr2_stream_callback:

drivers/media/usb/pvrusb2/pvrusb2-v4l2.c:1070:30: error: cast from 'void (*)(struct pvr2_v4l2_fh *)' to 'pvr2_stream_callback' (aka 'void (*)(void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
 1070 |         pvr2_stream_set_callback(sp,(pvr2_stream_callback)pvr2_v4l2_notify,fh);
      |                                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/usb/pvrusb2/pvrusb2-context.c:110:6: error: cast from 'void (*)(struct pvr2_context *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
  110 |                                         (void (*)(void *))pvr2_context_notify,
      |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/usb/pvrusb2/pvrusb2-dvb.c:152:6: error: cast from 'void (*)(struct pvr2_dvb_adapter *)' to 'pvr2_stream_callback' (aka 'void (*)(void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
  152 |                                  (pvr2_stream_callback) pvr2_dvb_notify, adap);
      |                                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Change the functions to actually take a void* argument so the cast is no longer
needed.

Fixes: bb8ce9d9143c ("V4L/DVB (7682): pvrusb2-dvb: finish up stream & buffer handling")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/pvrusb2/pvrusb2-context.c | 8 ++++----
 drivers/media/usb/pvrusb2/pvrusb2-dvb.c     | 6 ++++--
 drivers/media/usb/pvrusb2/pvrusb2-v4l2.c    | 6 ++++--
 3 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-context.c b/drivers/media/usb/pvrusb2/pvrusb2-context.c
index 1764674de98bc..58f2f3ff10ee2 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-context.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-context.c
@@ -90,8 +90,10 @@ static void pvr2_context_destroy(struct pvr2_context *mp)
 }
 
 
-static void pvr2_context_notify(struct pvr2_context *mp)
+static void pvr2_context_notify(void *ptr)
 {
+	struct pvr2_context *mp = ptr;
+
 	pvr2_context_set_notify(mp,!0);
 }
 
@@ -106,9 +108,7 @@ static void pvr2_context_check(struct pvr2_context *mp)
 		pvr2_trace(PVR2_TRACE_CTXT,
 			   "pvr2_context %p (initialize)", mp);
 		/* Finish hardware initialization */
-		if (pvr2_hdw_initialize(mp->hdw,
-					(void (*)(void *))pvr2_context_notify,
-					mp)) {
+		if (pvr2_hdw_initialize(mp->hdw, pvr2_context_notify, mp)) {
 			mp->video_stream.stream =
 				pvr2_hdw_get_video_stream(mp->hdw);
 			/* Trigger interface initialization.  By doing this
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-dvb.c b/drivers/media/usb/pvrusb2/pvrusb2-dvb.c
index 6954584526a32..1b768e7466721 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-dvb.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-dvb.c
@@ -88,8 +88,10 @@ static int pvr2_dvb_feed_thread(void *data)
 	return stat;
 }
 
-static void pvr2_dvb_notify(struct pvr2_dvb_adapter *adap)
+static void pvr2_dvb_notify(void *ptr)
 {
+	struct pvr2_dvb_adapter *adap = ptr;
+
 	wake_up(&adap->buffer_wait_data);
 }
 
@@ -149,7 +151,7 @@ static int pvr2_dvb_stream_do_start(struct pvr2_dvb_adapter *adap)
 	}
 
 	pvr2_stream_set_callback(pvr->video_stream.stream,
-				 (pvr2_stream_callback) pvr2_dvb_notify, adap);
+				 pvr2_dvb_notify, adap);
 
 	ret = pvr2_stream_set_buffer_count(stream, PVR2_DVB_BUFFER_COUNT);
 	if (ret < 0) return ret;
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
index c872868becbdc..29f2e767f236f 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c
@@ -1037,8 +1037,10 @@ static int pvr2_v4l2_open(struct file *file)
 }
 
 
-static void pvr2_v4l2_notify(struct pvr2_v4l2_fh *fhp)
+static void pvr2_v4l2_notify(void *ptr)
 {
+	struct pvr2_v4l2_fh *fhp = ptr;
+
 	wake_up(&fhp->wait_data);
 }
 
@@ -1071,7 +1073,7 @@ static int pvr2_v4l2_iosetup(struct pvr2_v4l2_fh *fh)
 
 	hdw = fh->channel.mc_head->hdw;
 	sp = fh->pdi->stream->stream;
-	pvr2_stream_set_callback(sp,(pvr2_stream_callback)pvr2_v4l2_notify,fh);
+	pvr2_stream_set_callback(sp, pvr2_v4l2_notify, fh);
 	pvr2_hdw_set_stream_type(hdw,fh->pdi->config);
 	if ((ret = pvr2_hdw_set_streaming(hdw,!0)) < 0) return ret;
 	return pvr2_ioread_set_enabled(fh->rhp,!0);
-- 
2.43.0

[PATCH 5.10 158/238] clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit 117e7dc697c2739d754db8fe0c1e2d4f1f5d5f82 ]

SDM845 downstream uses non-default values for GDSC internal waits.
Program them accordingly to avoid surprises.

Fixes: 81351776c9fb ("clk: qcom: Add display clock controller driver for SDM845")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 6
Link: https://lore.kernel.org/r/20240103-topic-845gdsc-v1-1-368efbe1a61d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/dispcc-sdm845.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/qcom/dispcc-sdm845.c b/drivers/clk/qcom/dispcc-sdm845.c
index 5c932cd17b140..8cd8174ac9aa7 100644
--- a/drivers/clk/qcom/dispcc-sdm845.c
+++ b/drivers/clk/qcom/dispcc-sdm845.c
@@ -768,6 +768,8 @@ static struct clk_branch disp_cc_mdss_vsync_clk = {
 
 static struct gdsc mdss_gdsc = {
 	.gdscr = 0x3000,
+	.en_few_wait_val = 0x6,
+	.en_rest_wait_val = 0x5,
 	.pd = {
 		.name = "mdss_gdsc",
 	},
-- 
2.43.0

[PATCH 5.10 159/238] drm/mediatek: dsi: Fix DSI RGB666 formats and definitions

[Sasha Levin]

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

[ Upstream commit fae6f815505301b92d9113764f4d76d0bfe45607 ]

The register bits definitions for RGB666 formats are wrong in multiple
ways: first, in the DSI_PS_SEL bits region, the Packed 18-bits RGB666
format is selected with bit 1, while the Loosely Packed one is bit 2,
and second - the definition name "LOOSELY_PS_18BIT_RGB666" is wrong
because the loosely packed format is 24 bits instead!

Either way, functions mtk_dsi_ps_control_vact() and mtk_dsi_ps_control()
do not even agree on the DSI_PS_SEL bit to set in DSI_PSCTRL: one sets
loosely packed (24) on RGB666, the other sets packed (18), and the other
way around for RGB666_PACKED.

Fixing this entire stack of issues is done in one go:
 - Use the correct bit for the Loosely Packed RGB666 definition
 - Rename LOOSELY_PS_18BIT_RGB666 to LOOSELY_PS_24BIT_RGB666
 - Change ps_bpp_mode in mtk_dsi_ps_control_vact() to set:
    - Loosely Packed, 24-bits for MIPI_DSI_FMT_RGB666
    - Packed, 18-bits for MIPI_DSI_FMT_RGB666_PACKED

Fixes: 2e54c14e310f ("drm/mediatek: Add DSI sub driver")
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240215085316.56835-3-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index a6e71b7b69b83..17d45f06cedf3 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -68,8 +68,8 @@
 #define DSI_PS_WC			0x3fff
 #define DSI_PS_SEL			(3 << 16)
 #define PACKED_PS_16BIT_RGB565		(0 << 16)
-#define LOOSELY_PS_18BIT_RGB666		(1 << 16)
-#define PACKED_PS_18BIT_RGB666		(2 << 16)
+#define PACKED_PS_18BIT_RGB666		(1 << 16)
+#define LOOSELY_PS_24BIT_RGB666		(2 << 16)
 #define PACKED_PS_24BIT_RGB888		(3 << 16)
 
 #define DSI_VSA_NL		0x20
@@ -365,10 +365,10 @@ static void mtk_dsi_ps_control_vact(struct mtk_dsi *dsi)
 		ps_bpp_mode |= PACKED_PS_24BIT_RGB888;
 		break;
 	case MIPI_DSI_FMT_RGB666:
-		ps_bpp_mode |= PACKED_PS_18BIT_RGB666;
+		ps_bpp_mode |= LOOSELY_PS_24BIT_RGB666;
 		break;
 	case MIPI_DSI_FMT_RGB666_PACKED:
-		ps_bpp_mode |= LOOSELY_PS_18BIT_RGB666;
+		ps_bpp_mode |= PACKED_PS_18BIT_RGB666;
 		break;
 	case MIPI_DSI_FMT_RGB565:
 		ps_bpp_mode |= PACKED_PS_16BIT_RGB565;
@@ -419,7 +419,7 @@ static void mtk_dsi_ps_control(struct mtk_dsi *dsi)
 		dsi_tmp_buf_bpp = 3;
 		break;
 	case MIPI_DSI_FMT_RGB666:
-		tmp_reg = LOOSELY_PS_18BIT_RGB666;
+		tmp_reg = LOOSELY_PS_24BIT_RGB666;
 		dsi_tmp_buf_bpp = 3;
 		break;
 	case MIPI_DSI_FMT_RGB666_PACKED:
-- 
2.43.0

[PATCH 5.10 160/238] PCI: Mark 3ware-9650SE Root Port Extended Tags as broken

[Sasha Levin]

From: Jörg Wedekind <joerg@wedekind.de>

[ Upstream commit baf67aefbe7d7deafa59ca49612d163f8889934c ]

Per PCIe r6.1, sec 2.2.6.2 and 7.5.3.4, a Requester may not use 8-bit Tags
unless its Extended Tag Field Enable is set, but all Receivers/Completers
must handle 8-bit Tags correctly regardless of their Extended Tag Field
Enable.

Some devices do not handle 8-bit Tags as Completers, so add a quirk for
them.  If we find such a device, we disable Extended Tags for the entire
hierarchy to make peer-to-peer DMA possible.

The 3ware 9650SE seems to have issues with handling 8-bit tags. Mark it as
broken.

This fixes PCI Parity Errors like :

  3w-9xxx: scsi0: ERROR: (0x06:0x000C): PCI Parity Error: clearing.
  3w-9xxx: scsi0: ERROR: (0x06:0x000D): PCI Abort: clearing.
  3w-9xxx: scsi0: ERROR: (0x06:0x000E): Controller Queue Error: clearing.
  3w-9xxx: scsi0: ERROR: (0x06:0x0010): Microcontroller Error: clearing.

Link: https://lore.kernel.org/r/20240219132811.8351-1-joerg@wedekind.de
Fixes: 60db3a4d8cc9 ("PCI: Enable PCIe Extended Tags if supported")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=202425
Signed-off-by: Jörg Wedekind <joerg@wedekind.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index b67aea8d8f197..646807a443e2d 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -5364,6 +5364,7 @@ static void quirk_no_ext_tags(struct pci_dev *pdev)
 
 	pci_walk_bus(bridge->bus, pci_configure_extended_tags, NULL);
 }
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_3WARE, 0x1004, quirk_no_ext_tags);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0132, quirk_no_ext_tags);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0140, quirk_no_ext_tags);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0141, quirk_no_ext_tags);
-- 
2.43.0

[PATCH 5.10 161/238] clk: hisilicon: hi3519: Release the correct number of gates in hi3519_clk_unregister()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 74e39f526d95c0c119ada1874871ee328c59fbee ]

The gates are stored in 'hi3519_gate_clks', not 'hi3519_mux_clks'.
This is also in line with how hisi_clk_register_gate() is called in the
probe.

Fixes: 224b3b262c52 ("clk: hisilicon: hi3519: add driver remove path and fix some issues")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/c3f1877c9a0886fa35c949c8f0ef25547f284f18.1704912510.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/hisilicon/clk-hi3519.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/hisilicon/clk-hi3519.c b/drivers/clk/hisilicon/clk-hi3519.c
index ad0c7f350cf03..60d8a27a90824 100644
--- a/drivers/clk/hisilicon/clk-hi3519.c
+++ b/drivers/clk/hisilicon/clk-hi3519.c
@@ -130,7 +130,7 @@ static void hi3519_clk_unregister(struct platform_device *pdev)
 	of_clk_del_provider(pdev->dev.of_node);
 
 	hisi_clk_unregister_gate(hi3519_gate_clks,
-				ARRAY_SIZE(hi3519_mux_clks),
+				ARRAY_SIZE(hi3519_gate_clks),
 				crg->clk_data);
 	hisi_clk_unregister_mux(hi3519_mux_clks,
 				ARRAY_SIZE(hi3519_mux_clks),
-- 
2.43.0

[PATCH 5.10 162/238] drm/tegra: put drm_gem_object ref on error in tegra_fb_create

[Sasha Levin]

From: Fedor Pchelkin <pchelkin@ispras.ru>

[ Upstream commit 32e5a120a5105bce01561978ee55aee8e40ac0dc ]

Inside tegra_fb_create(), drm_gem_object_lookup() increments ref count of
the found object. But if the following size check fails then the last
found object's ref count should be put there as the unreferencing loop
can't detect this situation.

Found by Linux Verification Center (linuxtesting.org).

Fixes: de2ba664c30f ("gpu: host1x: drm: Add memory manager and fb")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215093356.12067-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/fb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/tegra/fb.c b/drivers/gpu/drm/tegra/fb.c
index 01939c57fc74d..2040dbfed7e21 100644
--- a/drivers/gpu/drm/tegra/fb.c
+++ b/drivers/gpu/drm/tegra/fb.c
@@ -155,6 +155,7 @@ struct drm_framebuffer *tegra_fb_create(struct drm_device *drm,
 
 		if (gem->size < size) {
 			err = -EINVAL;
+			drm_gem_object_put(gem);
 			goto unreference;
 		}
 
-- 
2.43.0

[PATCH 5.10 163/238] mfd: syscon: Call of_node_put() only when of_parse_phandle() takes a ref

[Sasha Levin]

From: Peter Griffin <peter.griffin@linaro.org>

[ Upstream commit d2b0680cf3b05490b579e71b0df6e07451977745 ]

of_parse_phandle() returns a device_node with refcount incremented, which
the callee needs to call of_node_put() on when done. We should only call
of_node_put() when the property argument is provided though as otherwise
nothing has taken a reference on the node.

Fixes: 45330bb43421 ("mfd: syscon: Allow property as NULL in syscon_regmap_lookup_by_phandle")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240220115012.471689-2-peter.griffin@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/syscon.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index 60f74144a4f88..4d536a097e8cb 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -224,7 +224,9 @@ struct regmap *syscon_regmap_lookup_by_phandle(struct device_node *np,
 		return ERR_PTR(-ENODEV);
 
 	regmap = syscon_node_to_regmap(syscon_np);
-	of_node_put(syscon_np);
+
+	if (property)
+		of_node_put(syscon_np);
 
 	return regmap;
 }
-- 
2.43.0

[PATCH 5.10 164/238] mfd: altera-sysmgr: Call of_node_put() only when of_parse_phandle() takes a ref

[Sasha Levin]

From: Peter Griffin <peter.griffin@linaro.org>

[ Upstream commit e28c28a34ee9fa2ea671a20e5e7064e6220d55e7 ]

of_parse_phandle() returns a device_node with refcount incremented, which
the callee needs to call of_node_put() on when done. We should only call
of_node_put() when the property argument is provided though as otherwise
nothing has taken a reference on the node.

Fixes: f36e789a1f8d ("mfd: altera-sysmgr: Add SOCFPGA System Manager")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240220115012.471689-4-peter.griffin@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/altera-sysmgr.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/altera-sysmgr.c b/drivers/mfd/altera-sysmgr.c
index 591b300d90953..59efe7d5dcaa9 100644
--- a/drivers/mfd/altera-sysmgr.c
+++ b/drivers/mfd/altera-sysmgr.c
@@ -110,7 +110,9 @@ struct regmap *altr_sysmgr_regmap_lookup_by_phandle(struct device_node *np,
 
 	dev = driver_find_device_by_of_node(&altr_sysmgr_driver.driver,
 					    (void *)sysmgr_np);
-	of_node_put(sysmgr_np);
+	if (property)
+		of_node_put(sysmgr_np);
+
 	if (!dev)
 		return ERR_PTR(-EPROBE_DEFER);
 
-- 
2.43.0

[PATCH 5.10 165/238] crypto: arm/sha - fix function cast warnings

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 53cc9baeb9bc2a187eb9c9790d30995148852b12 ]

clang-16 warns about casting between incompatible function types:

arch/arm/crypto/sha256_glue.c:37:5: error: cast from 'void (*)(u32 *, const void *, unsigned int)' (aka 'void (*)(unsigned int *, const void *, unsigned int)') to 'sha256_block_fn *' (aka 'void (*)(struct sha256_state *, const unsigned char *, int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
   37 |                                 (sha256_block_fn *)sha256_block_data_order);
      |                                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm/crypto/sha512-glue.c:34:3: error: cast from 'void (*)(u64 *, const u8 *, int)' (aka 'void (*)(unsigned long long *, const unsigned char *, int)') to 'sha512_block_fn *' (aka 'void (*)(struct sha512_state *, const unsigned char *, int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
   34 |                 (sha512_block_fn *)sha512_block_data_order);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fix the prototypes for the assembler functions to match the typedef.
The code already relies on the digest being the first part of the
state structure, so there is no change in behavior.

Fixes: c80ae7ca3726 ("crypto: arm/sha512 - accelerated SHA-512 using ARM generic ASM and NEON")
Fixes: b59e2ae3690c ("crypto: arm/sha256 - move SHA-224/256 ASM/NEON implementation to base layer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/crypto/sha256_glue.c | 13 +++++--------
 arch/arm/crypto/sha512-glue.c | 12 +++++-------
 2 files changed, 10 insertions(+), 15 deletions(-)

diff --git a/arch/arm/crypto/sha256_glue.c b/arch/arm/crypto/sha256_glue.c
index b8a4f79020cf8..e36b86778468e 100644
--- a/arch/arm/crypto/sha256_glue.c
+++ b/arch/arm/crypto/sha256_glue.c
@@ -24,8 +24,8 @@
 
 #include "sha256_glue.h"
 
-asmlinkage void sha256_block_data_order(u32 *digest, const void *data,
-					unsigned int num_blks);
+asmlinkage void sha256_block_data_order(struct sha256_state *state,
+					const u8 *data, int num_blks);
 
 int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data,
 			     unsigned int len)
@@ -33,23 +33,20 @@ int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data,
 	/* make sure casting to sha256_block_fn() is safe */
 	BUILD_BUG_ON(offsetof(struct sha256_state, state) != 0);
 
-	return sha256_base_do_update(desc, data, len,
-				(sha256_block_fn *)sha256_block_data_order);
+	return sha256_base_do_update(desc, data, len, sha256_block_data_order);
 }
 EXPORT_SYMBOL(crypto_sha256_arm_update);
 
 static int crypto_sha256_arm_final(struct shash_desc *desc, u8 *out)
 {
-	sha256_base_do_finalize(desc,
-				(sha256_block_fn *)sha256_block_data_order);
+	sha256_base_do_finalize(desc, sha256_block_data_order);
 	return sha256_base_finish(desc, out);
 }
 
 int crypto_sha256_arm_finup(struct shash_desc *desc, const u8 *data,
 			    unsigned int len, u8 *out)
 {
-	sha256_base_do_update(desc, data, len,
-			      (sha256_block_fn *)sha256_block_data_order);
+	sha256_base_do_update(desc, data, len, sha256_block_data_order);
 	return crypto_sha256_arm_final(desc, out);
 }
 EXPORT_SYMBOL(crypto_sha256_arm_finup);
diff --git a/arch/arm/crypto/sha512-glue.c b/arch/arm/crypto/sha512-glue.c
index 8775aa42bbbe8..1a16b98ec1085 100644
--- a/arch/arm/crypto/sha512-glue.c
+++ b/arch/arm/crypto/sha512-glue.c
@@ -25,27 +25,25 @@ MODULE_ALIAS_CRYPTO("sha512");
 MODULE_ALIAS_CRYPTO("sha384-arm");
 MODULE_ALIAS_CRYPTO("sha512-arm");
 
-asmlinkage void sha512_block_data_order(u64 *state, u8 const *src, int blocks);
+asmlinkage void sha512_block_data_order(struct sha512_state *state,
+					u8 const *src, int blocks);
 
 int sha512_arm_update(struct shash_desc *desc, const u8 *data,
 		      unsigned int len)
 {
-	return sha512_base_do_update(desc, data, len,
-		(sha512_block_fn *)sha512_block_data_order);
+	return sha512_base_do_update(desc, data, len, sha512_block_data_order);
 }
 
 static int sha512_arm_final(struct shash_desc *desc, u8 *out)
 {
-	sha512_base_do_finalize(desc,
-		(sha512_block_fn *)sha512_block_data_order);
+	sha512_base_do_finalize(desc, sha512_block_data_order);
 	return sha512_base_finish(desc, out);
 }
 
 int sha512_arm_finup(struct shash_desc *desc, const u8 *data,
 		     unsigned int len, u8 *out)
 {
-	sha512_base_do_update(desc, data, len,
-		(sha512_block_fn *)sha512_block_data_order);
+	sha512_base_do_update(desc, data, len, sha512_block_data_order);
 	return sha512_arm_final(desc, out);
 }
 
-- 
2.43.0

[PATCH 5.10 166/238] drm/tidss: Fix initial plane zpos values

[Sasha Levin]

From: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>

[ Upstream commit 3ec948ccb2c4b99e8fbfdd950adbe92ea577b395 ]

When the driver sets up the zpos property it sets the default zpos value
to the HW id of the plane. That is fine as such, but as on many DSS
versions the driver arranges the DRM planes in a different order than
the HW planes (to keep the non-scalable planes first), this leads to odd
initial zpos values. An example is J721e, where the initial zpos values
for DRM planes are 1, 3, 0, 2.

In theory the userspace should configure the zpos values properly when
using multiple planes, and in that sense the initial zpos values
shouldn't matter, but there's really no reason not to fix this and help
the userspace apps which don't handle zpos perfectly. In particular,
some versions of Weston seem to have issues dealing with the planes
with the current default zpos values.

So let's change the zpos values for the DRM planes to 0, 1, 2, 3.

Another option would be to configure the planes marked as primary planes
to zpos 0. On a two display system this would give us plane zpos values
of 0, 0, 1, 2. The end result and behavior would be very similar in this
option, and I'm not aware that this would actually help us in any way.
So, to keep the code simple, I opted for the 0, 1, 2, 3 values.

Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240213-tidss-fixes-v1-1-d709e8dfa505@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tidss/tidss_plane.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tidss/tidss_plane.c b/drivers/gpu/drm/tidss/tidss_plane.c
index 43e72d0b2d84d..e2ebd5fdc1138 100644
--- a/drivers/gpu/drm/tidss/tidss_plane.c
+++ b/drivers/gpu/drm/tidss/tidss_plane.c
@@ -202,7 +202,7 @@ struct tidss_plane *tidss_plane_create(struct tidss_device *tidss,
 
 	drm_plane_helper_add(&tplane->plane, &tidss_plane_helper_funcs);
 
-	drm_plane_create_zpos_property(&tplane->plane, hw_plane_id, 0,
+	drm_plane_create_zpos_property(&tplane->plane, tidss->num_planes, 0,
 				       num_planes - 1);
 
 	ret = drm_plane_create_color_properties(&tplane->plane,
-- 
2.43.0

[PATCH 5.10 167/238] mtd: maps: physmap-core: fix flash size larger than 32-bit

[Sasha Levin]

From: Baruch Siach <baruch@tkos.co.il>

[ Upstream commit 3884f03edd34887514a0865a80769cd5362d5c3b ]

mtd-ram can potentially be larger than 4GB. get_bitmask_order() uses
fls() that is not guaranteed to work with values larger than 32-bit.
Specifically on aarch64 fls() returns 0 when all 32 LSB bits are clear.
Use fls64() instead.

Fixes: ba32ce95cbd987 ("mtd: maps: Merge gpio-addr-flash.c into physmap-core.c")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/9fbf3664ce00f8b07867f1011834015f21d162a5.1707388458.git.baruch@tkos.co.il
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/maps/physmap-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/maps/physmap-core.c b/drivers/mtd/maps/physmap-core.c
index 9ab795f03c546..e5552093585e2 100644
--- a/drivers/mtd/maps/physmap-core.c
+++ b/drivers/mtd/maps/physmap-core.c
@@ -528,7 +528,7 @@ static int physmap_flash_probe(struct platform_device *dev)
 		if (!info->maps[i].phys)
 			info->maps[i].phys = res->start;
 
-		info->win_order = get_bitmask_order(resource_size(res)) - 1;
+		info->win_order = fls64(resource_size(res)) - 1;
 		info->maps[i].size = BIT(info->win_order +
 					 (info->gpios ?
 					  info->gpios->ndescs : 0));
-- 
2.43.0

[PATCH 5.10 168/238] mtd: rawnand: lpc32xx_mlc: fix irq handler prototype

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 347b828882e6334690e7003ce5e2fe5f233dc508 ]

clang-16 warns about mismatched function prototypes:

drivers/mtd/nand/raw/lpc32xx_mlc.c:783:29: error: cast from 'irqreturn_t (*)(int, struct lpc32xx_nand_host *)' (aka 'enum irqreturn (*)(int, struct lpc32xx_nand_host *)') to 'irq_handler_t' (aka 'enum irqreturn (*)(int, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]

Change the interrupt handler to the normal way of just passing
a void* pointer and converting it inside the function..

Fixes: 70f7cb78ec53 ("mtd: add LPC32xx MLC NAND driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240213100146.455811-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/nand/raw/lpc32xx_mlc.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/raw/lpc32xx_mlc.c b/drivers/mtd/nand/raw/lpc32xx_mlc.c
index 9e728c7317956..db228460a9079 100644
--- a/drivers/mtd/nand/raw/lpc32xx_mlc.c
+++ b/drivers/mtd/nand/raw/lpc32xx_mlc.c
@@ -304,8 +304,9 @@ static int lpc32xx_nand_device_ready(struct nand_chip *nand_chip)
 	return 0;
 }
 
-static irqreturn_t lpc3xxx_nand_irq(int irq, struct lpc32xx_nand_host *host)
+static irqreturn_t lpc3xxx_nand_irq(int irq, void *data)
 {
+	struct lpc32xx_nand_host *host = data;
 	uint8_t sr;
 
 	/* Clear interrupt flag by reading status */
@@ -780,7 +781,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
 		goto release_dma_chan;
 	}
 
-	if (request_irq(host->irq, (irq_handler_t)&lpc3xxx_nand_irq,
+	if (request_irq(host->irq, &lpc3xxx_nand_irq,
 			IRQF_TRIGGER_HIGH, DRV_NAME, host)) {
 		dev_err(&pdev->dev, "Error requesting NAND IRQ\n");
 		res = -ENXIO;
-- 
2.43.0

[PATCH 5.10 169/238] ASoC: meson: axg-tdm-interface: fix mclk setup without mclk-fs

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit e3741a8d28a1137f8b19ae6f3d6e3be69a454a0a ]

By default, when mclk-fs is not provided, the tdm-interface driver
requests an MCLK that is 4x the bit clock, SCLK.

However there is no justification for this:

* If the codec needs MCLK for its operation, mclk-fs is expected to be set
  according to the codec requirements.
* If the codec does not need MCLK the minimum is 2 * SCLK, because this is
  minimum the divider between SCLK and MCLK can do.

Multiplying by 4 may cause problems because the PLL limit may be reached
sooner than it should, so use 2x instead.

Fixes: d60e4f1e4be5 ("ASoC: meson: add tdm interface driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20240223175116.2005407-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/axg-tdm-interface.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/meson/axg-tdm-interface.c b/sound/soc/meson/axg-tdm-interface.c
index e076ced300257..ac43a7ab7bcf6 100644
--- a/sound/soc/meson/axg-tdm-interface.c
+++ b/sound/soc/meson/axg-tdm-interface.c
@@ -266,8 +266,8 @@ static int axg_tdm_iface_set_sclk(struct snd_soc_dai *dai,
 	srate = iface->slots * iface->slot_width * params_rate(params);
 
 	if (!iface->mclk_rate) {
-		/* If no specific mclk is requested, default to bit clock * 4 */
-		clk_set_rate(iface->mclk, 4 * srate);
+		/* If no specific mclk is requested, default to bit clock * 2 */
+		clk_set_rate(iface->mclk, 2 * srate);
 	} else {
 		/* Check if we can actually get the bit clock from mclk */
 		if (iface->mclk_rate % srate) {
-- 
2.43.0

[PATCH 5.10 170/238] ASoC: meson: axg-tdm-interface: add frame rate constraint

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit 59c6a3a43b221cc2a211181b1298e43b2c2df782 ]

According to Amlogic datasheets for the SoCs supported by this driver, the
maximum bit clock rate is 100MHz.

The tdm interface allows the rates listed by the DAI driver, regardless of
the number slots or their width. However, these will impact the bit clock
rate.

Hitting the 100MHz limit is very unlikely for most use cases but it is
possible.

For example with 32 slots / 32 bits wide, the maximum rate is no longer
384kHz but ~96kHz.

Add the constraint accordingly if the component is not already active.
If it is active, the rate is already constrained by the first stream rate.

Fixes: d60e4f1e4be5 ("ASoC: meson: add tdm interface driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20240223175116.2005407-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/axg-tdm-interface.c | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)

diff --git a/sound/soc/meson/axg-tdm-interface.c b/sound/soc/meson/axg-tdm-interface.c
index ac43a7ab7bcf6..60d132ab1ab78 100644
--- a/sound/soc/meson/axg-tdm-interface.c
+++ b/sound/soc/meson/axg-tdm-interface.c
@@ -12,6 +12,9 @@
 
 #include "axg-tdm.h"
 
+/* Maximum bit clock frequency according the datasheets */
+#define MAX_SCLK 100000000 /* Hz */
+
 enum {
 	TDM_IFACE_PAD,
 	TDM_IFACE_LOOPBACK,
@@ -155,19 +158,27 @@ static int axg_tdm_iface_startup(struct snd_pcm_substream *substream,
 		return -EINVAL;
 	}
 
-	/* Apply component wide rate symmetry */
 	if (snd_soc_component_active(dai->component)) {
+		/* Apply component wide rate symmetry */
 		ret = snd_pcm_hw_constraint_single(substream->runtime,
 						   SNDRV_PCM_HW_PARAM_RATE,
 						   iface->rate);
-		if (ret < 0) {
-			dev_err(dai->dev,
-				"can't set iface rate constraint\n");
-			return ret;
-		}
+
+	} else {
+		/* Limit rate according to the slot number and width */
+		unsigned int max_rate =
+			MAX_SCLK / (iface->slots * iface->slot_width);
+		ret = snd_pcm_hw_constraint_minmax(substream->runtime,
+						   SNDRV_PCM_HW_PARAM_RATE,
+						   0, max_rate);
 	}
 
-	return 0;
+	if (ret < 0)
+		dev_err(dai->dev, "can't set iface rate constraint\n");
+	else
+		ret = 0;
+
+	return ret;
 }
 
 static int axg_tdm_iface_set_stream(struct snd_pcm_substream *substream,
-- 
2.43.0

[PATCH 5.10 171/238] drm/amdgpu: Fix missing break in ATOM_ARG_IMM Case of atom_get_src_int()

[Sasha Levin]

From: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>

[ Upstream commit 7cf1ad2fe10634238b38442a851d89514cb14ea2 ]

Missing break statement in the ATOM_ARG_IMM case of a switch statement,
adds the missing break statement, ensuring that the program's control
flow is as intended.

Fixes the below:
drivers/gpu/drm/amd/amdgpu/atom.c:323 atom_get_src_int() warn: ignoring unreachable code.

Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Cc: Jammy Zhou <Jammy.Zhou@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/atom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/atom.c b/drivers/gpu/drm/amd/amdgpu/atom.c
index 4cfc786699c7f..c1841fa873f56 100644
--- a/drivers/gpu/drm/amd/amdgpu/atom.c
+++ b/drivers/gpu/drm/amd/amdgpu/atom.c
@@ -310,7 +310,7 @@ static uint32_t atom_get_src_int(atom_exec_context *ctx, uint8_t attr,
 				DEBUG("IMM 0x%02X\n", val);
 			return val;
 		}
-		return 0;
+		break;
 	case ATOM_ARG_PLL:
 		idx = U8(*ptr);
 		(*ptr)++;
-- 
2.43.0

[PATCH 5.10 172/238] media: pvrusb2: fix uaf in pvr2_context_set_notify

[Sasha Levin]

From: Edward Adam Davis <eadavis@qq.com>

[ Upstream commit 0a0b79ea55de8514e1750884e5fec77f9fdd01ee ]

[Syzbot reported]
BUG: KASAN: slab-use-after-free in pvr2_context_set_notify+0x2c4/0x310 drivers/media/usb/pvrusb2/pvrusb2-context.c:35
Read of size 4 at addr ffff888113aeb0d8 by task kworker/1:1/26

CPU: 1 PID: 26 Comm: kworker/1:1 Not tainted 6.8.0-rc1-syzkaller-00046-gf1a27f081c1f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Workqueue: usb_hub_wq hub_event
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:377 [inline]
 print_report+0xc4/0x620 mm/kasan/report.c:488
 kasan_report+0xda/0x110 mm/kasan/report.c:601
 pvr2_context_set_notify+0x2c4/0x310 drivers/media/usb/pvrusb2/pvrusb2-context.c:35
 pvr2_context_notify drivers/media/usb/pvrusb2/pvrusb2-context.c:95 [inline]
 pvr2_context_disconnect+0x94/0xb0 drivers/media/usb/pvrusb2/pvrusb2-context.c:272

Freed by task 906:
kasan_save_stack+0x33/0x50 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
kasan_save_free_info+0x3f/0x60 mm/kasan/generic.c:640
poison_slab_object mm/kasan/common.c:241 [inline]
__kasan_slab_free+0x106/0x1b0 mm/kasan/common.c:257
kasan_slab_free include/linux/kasan.h:184 [inline]
slab_free_hook mm/slub.c:2121 [inline]
slab_free mm/slub.c:4299 [inline]
kfree+0x105/0x340 mm/slub.c:4409
pvr2_context_check drivers/media/usb/pvrusb2/pvrusb2-context.c:137 [inline]
pvr2_context_thread_func+0x69d/0x960 drivers/media/usb/pvrusb2/pvrusb2-context.c:158

[Analyze]
Task A set disconnect_flag = !0, which resulted in Task B's condition being met
and releasing mp, leading to this issue.

[Fix]
Place the disconnect_flag assignment operation after all code in pvr2_context_disconnect()
to avoid this issue.

Reported-and-tested-by: syzbot+ce750e124675d4599449@syzkaller.appspotmail.com
Fixes: e5be15c63804 ("V4L/DVB (7711): pvrusb2: Fix race on module unload")
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/pvrusb2/pvrusb2-context.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-context.c b/drivers/media/usb/pvrusb2/pvrusb2-context.c
index 58f2f3ff10ee2..73c95ba2328a4 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-context.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-context.c
@@ -267,9 +267,9 @@ static void pvr2_context_exit(struct pvr2_context *mp)
 void pvr2_context_disconnect(struct pvr2_context *mp)
 {
 	pvr2_hdw_disconnect(mp->hdw);
-	mp->disconnect_flag = !0;
 	if (!pvr2_context_shutok())
 		pvr2_context_notify(mp);
+	mp->disconnect_flag = !0;
 }
 
 
-- 
2.43.0

[PATCH 5.10 173/238] media: dvb-frontends: avoid stack overflow warnings with clang

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 7a4cf27d1f0538f779bf31b8c99eda394e277119 ]

A previous patch worked around a KASAN issue in stv0367, now a similar
problem showed up with clang:

drivers/media/dvb-frontends/stv0367.c:1222:12: error: stack frame size (3624) exceeds limit (2048) in 'stv0367ter_set_frontend' [-Werror,-Wframe-larger-than]
 1214 | static int stv0367ter_set_frontend(struct dvb_frontend *fe)

Rework the stv0367_writereg() function to be simpler and mark both
register access functions as noinline_for_stack so the temporary
i2c_msg structures do not get duplicated on the stack when KASAN_STACK
is enabled.

Fixes: 3cd890dbe2a4 ("media: dvb-frontends: fix i2c access helpers for KASAN")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-frontends/stv0367.c | 34 +++++++--------------------
 1 file changed, 8 insertions(+), 26 deletions(-)

diff --git a/drivers/media/dvb-frontends/stv0367.c b/drivers/media/dvb-frontends/stv0367.c
index 0bfca1174e9e7..8cbae8235b174 100644
--- a/drivers/media/dvb-frontends/stv0367.c
+++ b/drivers/media/dvb-frontends/stv0367.c
@@ -118,50 +118,32 @@ static const s32 stv0367cab_RF_LookUp2[RF_LOOKUP_TABLE2_SIZE][RF_LOOKUP_TABLE2_S
 	}
 };
 
-static
-int stv0367_writeregs(struct stv0367_state *state, u16 reg, u8 *data, int len)
+static noinline_for_stack
+int stv0367_writereg(struct stv0367_state *state, u16 reg, u8 data)
 {
-	u8 buf[MAX_XFER_SIZE];
+	u8 buf[3] = { MSB(reg), LSB(reg), data };
 	struct i2c_msg msg = {
 		.addr = state->config->demod_address,
 		.flags = 0,
 		.buf = buf,
-		.len = len + 2
+		.len = 3,
 	};
 	int ret;
 
-	if (2 + len > sizeof(buf)) {
-		printk(KERN_WARNING
-		       "%s: i2c wr reg=%04x: len=%d is too big!\n",
-		       KBUILD_MODNAME, reg, len);
-		return -EINVAL;
-	}
-
-
-	buf[0] = MSB(reg);
-	buf[1] = LSB(reg);
-	memcpy(buf + 2, data, len);
-
 	if (i2cdebug)
 		printk(KERN_DEBUG "%s: [%02x] %02x: %02x\n", __func__,
-			state->config->demod_address, reg, buf[2]);
+			state->config->demod_address, reg, data);
 
 	ret = i2c_transfer(state->i2c, &msg, 1);
 	if (ret != 1)
 		printk(KERN_ERR "%s: i2c write error! ([%02x] %02x: %02x)\n",
-			__func__, state->config->demod_address, reg, buf[2]);
+			__func__, state->config->demod_address, reg, data);
 
 	return (ret != 1) ? -EREMOTEIO : 0;
 }
 
-static int stv0367_writereg(struct stv0367_state *state, u16 reg, u8 data)
-{
-	u8 tmp = data; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */
-
-	return stv0367_writeregs(state, reg, &tmp, 1);
-}
-
-static u8 stv0367_readreg(struct stv0367_state *state, u16 reg)
+static noinline_for_stack
+u8 stv0367_readreg(struct stv0367_state *state, u16 reg)
 {
 	u8 b0[] = { 0, 0 };
 	u8 b1[] = { 0 };
-- 
2.43.0

[PATCH 5.10 174/238] media: go7007: fix a memleak in go7007_load_encoder

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit b9b683844b01d171a72b9c0419a2d760d946ee12 ]

In go7007_load_encoder, bounce(i.e. go->boot_fw), is allocated without
a deallocation thereafter. After the following call chain:

saa7134_go7007_init
  |-> go7007_boot_encoder
        |-> go7007_load_encoder
  |-> kfree(go)

go is freed and thus bounce is leaked.

Fixes: 95ef39403f89 ("[media] go7007: remember boot firmware")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/go7007/go7007-driver.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/media/usb/go7007/go7007-driver.c b/drivers/media/usb/go7007/go7007-driver.c
index 6650eab913d81..3c66542ce284a 100644
--- a/drivers/media/usb/go7007/go7007-driver.c
+++ b/drivers/media/usb/go7007/go7007-driver.c
@@ -80,7 +80,7 @@ static int go7007_load_encoder(struct go7007 *go)
 	const struct firmware *fw_entry;
 	char fw_name[] = "go7007/go7007fw.bin";
 	void *bounce;
-	int fw_len, rv = 0;
+	int fw_len;
 	u16 intr_val, intr_data;
 
 	if (go->boot_fw == NULL) {
@@ -109,9 +109,11 @@ static int go7007_load_encoder(struct go7007 *go)
 	    go7007_read_interrupt(go, &intr_val, &intr_data) < 0 ||
 			(intr_val & ~0x1) != 0x5a5a) {
 		v4l2_err(go, "error transferring firmware\n");
-		rv = -1;
+		kfree(go->boot_fw);
+		go->boot_fw = NULL;
+		return -1;
 	}
-	return rv;
+	return 0;
 }
 
 MODULE_FIRMWARE("go7007/go7007fw.bin");
-- 
2.43.0

[PATCH 5.10 175/238] media: ttpci: fix two memleaks in budget_av_attach

[Sasha Levin]

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit d0b07f712bf61e1a3cf23c87c663791c42e50837 ]

When saa7146_register_device and saa7146_vv_init fails, budget_av_attach
should free the resources it allocates, like the error-handling of
ttpci_budget_init does. Besides, there are two fixme comment refers to
such deallocations.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/ttpci/budget-av.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/media/pci/ttpci/budget-av.c b/drivers/media/pci/ttpci/budget-av.c
index 3cb83005cf09b..519f85e0a397d 100644
--- a/drivers/media/pci/ttpci/budget-av.c
+++ b/drivers/media/pci/ttpci/budget-av.c
@@ -1462,7 +1462,8 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
 		budget_av->has_saa7113 = 1;
 		err = saa7146_vv_init(dev, &vv_data);
 		if (err != 0) {
-			/* fixme: proper cleanup here */
+			ttpci_budget_deinit(&budget_av->budget);
+			kfree(budget_av);
 			ERR("cannot init vv subsystem\n");
 			return err;
 		}
@@ -1471,9 +1472,10 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
 		vv_data.vid_ops.vidioc_s_input = vidioc_s_input;
 
 		if ((err = saa7146_register_device(&budget_av->vd, dev, "knc1", VFL_TYPE_VIDEO))) {
-			/* fixme: proper cleanup here */
-			ERR("cannot register capture v4l2 device\n");
 			saa7146_vv_release(dev);
+			ttpci_budget_deinit(&budget_av->budget);
+			kfree(budget_av);
+			ERR("cannot register capture v4l2 device\n");
 			return err;
 		}
 
-- 
2.43.0

[PATCH 5.10 176/238] media: mediatek: vcodec: avoid -Wcast-function-type-strict warning

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit bfb1b99802ef16045402deb855c197591dc78886 ]

The ipi handler here tries hard to maintain const-ness of its argument,
but by doing that causes a warning about function type casts:

drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_vpu.c:38:32: error: cast from 'mtk_vcodec_ipi_handler' (aka 'void (*)(void *, unsigned int, void *)') to 'ipi_handler_t' (aka 'void (*)(const void *, unsigned int, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
   38 |         ipi_handler_t handler_const = (ipi_handler_t)handler;
      |                                       ^~~~~~~~~~~~~~~~~~~~~~

Remove the hack and just use a non-const argument.

Fixes: bf1d556ad4e0 ("media: mtk-vcodec: abstract firmware interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/mtk-mdp/mtk_mdp_vpu.c          |  2 +-
 drivers/media/platform/mtk-vcodec/mtk_vcodec_fw_vpu.c | 10 +---------
 drivers/media/platform/mtk-vpu/mtk_vpu.c              |  2 +-
 drivers/media/platform/mtk-vpu/mtk_vpu.h              |  2 +-
 4 files changed, 4 insertions(+), 12 deletions(-)

diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_vpu.c b/drivers/media/platform/mtk-mdp/mtk_mdp_vpu.c
index b065ccd069140..378a1cba0144f 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_vpu.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_vpu.c
@@ -26,7 +26,7 @@ static void mtk_mdp_vpu_handle_init_ack(const struct mdp_ipi_comm_ack *msg)
 	vpu->inst_addr = msg->vpu_inst_addr;
 }
 
-static void mtk_mdp_vpu_ipi_handler(const void *data, unsigned int len,
+static void mtk_mdp_vpu_ipi_handler(void *data, unsigned int len,
 				    void *priv)
 {
 	const struct mdp_ipi_comm_ack *msg = data;
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw_vpu.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw_vpu.c
index cfc7ebed8fb7a..1ec29f1b163a1 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw_vpu.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw_vpu.c
@@ -29,15 +29,7 @@ static int mtk_vcodec_vpu_set_ipi_register(struct mtk_vcodec_fw *fw, int id,
 					   mtk_vcodec_ipi_handler handler,
 					   const char *name, void *priv)
 {
-	/*
-	 * The handler we receive takes a void * as its first argument. We
-	 * cannot change this because it needs to be passed down to the rproc
-	 * subsystem when SCP is used. VPU takes a const argument, which is
-	 * more constrained, so the conversion below is safe.
-	 */
-	ipi_handler_t handler_const = (ipi_handler_t)handler;
-
-	return vpu_ipi_register(fw->pdev, id, handler_const, name, priv);
+	return vpu_ipi_register(fw->pdev, id, handler, name, priv);
 }
 
 static int mtk_vcodec_vpu_ipi_send(struct mtk_vcodec_fw *fw, int id, void *buf,
diff --git a/drivers/media/platform/mtk-vpu/mtk_vpu.c b/drivers/media/platform/mtk-vpu/mtk_vpu.c
index e7c4b0dd588a9..a2f61d97ffeb1 100644
--- a/drivers/media/platform/mtk-vpu/mtk_vpu.c
+++ b/drivers/media/platform/mtk-vpu/mtk_vpu.c
@@ -612,7 +612,7 @@ int vpu_load_firmware(struct platform_device *pdev)
 }
 EXPORT_SYMBOL_GPL(vpu_load_firmware);
 
-static void vpu_init_ipi_handler(const void *data, unsigned int len, void *priv)
+static void vpu_init_ipi_handler(void *data, unsigned int len, void *priv)
 {
 	struct mtk_vpu *vpu = priv;
 	const struct vpu_run *run = data;
diff --git a/drivers/media/platform/mtk-vpu/mtk_vpu.h b/drivers/media/platform/mtk-vpu/mtk_vpu.h
index ee7c552ce9289..d4453b4bcee92 100644
--- a/drivers/media/platform/mtk-vpu/mtk_vpu.h
+++ b/drivers/media/platform/mtk-vpu/mtk_vpu.h
@@ -15,7 +15,7 @@
  * VPU interfaces with other blocks by share memory and interrupt.
  **/
 
-typedef void (*ipi_handler_t) (const void *data,
+typedef void (*ipi_handler_t) (void *data,
 			       unsigned int len,
 			       void *priv);
 
-- 
2.43.0

[PATCH 5.10 177/238] drm/mediatek: Fix a null pointer crash in mtk_drm_crtc_finish_page_flip

[Sasha Levin]

From: Hsin-Yi Wang <hsinyi@chromium.org>

[ Upstream commit c958e86e9cc1b48cac004a6e245154dfba8e163b ]

It's possible that mtk_crtc->event is NULL in
mtk_drm_crtc_finish_page_flip().

pending_needs_vblank value is set by mtk_crtc->event, but in
mtk_drm_crtc_atomic_flush(), it's is not guarded by the same
lock in mtk_drm_finish_page_flip(), thus a race condition happens.

Consider the following case:

CPU1                              CPU2
step 1:
mtk_drm_crtc_atomic_begin()
mtk_crtc->event is not null,
                                  step 1:
                                  mtk_drm_crtc_atomic_flush:
                                  mtk_drm_crtc_update_config(
                                      !!mtk_crtc->event)
step 2:
mtk_crtc_ddp_irq ->
mtk_drm_finish_page_flip:
lock
mtk_crtc->event set to null,
pending_needs_vblank set to false
unlock
                                  pending_needs_vblank set to true,

                                  step 2:
                                  mtk_crtc_ddp_irq ->
                                  mtk_drm_finish_page_flip called again,
                                  pending_needs_vblank is still true
                                  //null pointer

Instead of guarding the entire mtk_drm_crtc_atomic_flush(), it's more
efficient to just check if mtk_crtc->event is null before use.

Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240223212404.3709690-1-hsinyi@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 1eaf513166a1a..d08827803a32f 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -84,11 +84,13 @@ static void mtk_drm_crtc_finish_page_flip(struct mtk_drm_crtc *mtk_crtc)
 	struct drm_crtc *crtc = &mtk_crtc->base;
 	unsigned long flags;
 
-	spin_lock_irqsave(&crtc->dev->event_lock, flags);
-	drm_crtc_send_vblank_event(crtc, mtk_crtc->event);
-	drm_crtc_vblank_put(crtc);
-	mtk_crtc->event = NULL;
-	spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
+	if (mtk_crtc->event) {
+		spin_lock_irqsave(&crtc->dev->event_lock, flags);
+		drm_crtc_send_vblank_event(crtc, mtk_crtc->event);
+		drm_crtc_vblank_put(crtc);
+		mtk_crtc->event = NULL;
+		spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
+	}
 }
 
 static void mtk_drm_finish_page_flip(struct mtk_drm_crtc *mtk_crtc)
-- 
2.43.0

[PATCH 5.10 178/238] powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value checks

[Sasha Levin]

From: Kajol Jain <kjain@linux.ibm.com>

[ Upstream commit ad86d7ee43b22aa2ed60fb982ae94b285c1be671 ]

Running event hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/
in one of the system throws below error:

 ---Logs---
 # perf list | grep hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles
  hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=?/[Kernel PMU event]

 # perf stat -v -e hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ sleep 2
Using CPUID 00800200
Control descriptor is not initialized
Warning:
hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ event is not supported by the kernel.
failed to read counter hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/

 Performance counter stats for 'system wide':

   <not supported>      hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/

       2.000700771 seconds time elapsed

The above error is because of the hcall failure as required
permission "Enable Performance Information Collection" is not set.
Based on current code, single_gpci_request function did not check the
error type incase hcall fails and by default returns EINVAL. But we can
have other reasons for hcall failures like H_AUTHORITY/H_PARAMETER with
detail_rc as GEN_BUF_TOO_SMALL, for which we need to act accordingly.

Fix this issue by adding new checks in the single_gpci_request and
h_gpci_event_init functions.

Result after fix patch changes:

 # perf stat -e hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ sleep 2
Error:
No permission to enable hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ event.

Fixes: 220a0c609ad1 ("powerpc/perf: Add support for the hv gpci (get performance counter info) interface")
Reported-by: Akanksha J N <akanksha@linux.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229122847.101162-1-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/perf/hv-gpci.c | 29 +++++++++++++++++++++++++++--
 1 file changed, 27 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/perf/hv-gpci.c b/arch/powerpc/perf/hv-gpci.c
index 28b770bbc10b4..2a054de80e50b 100644
--- a/arch/powerpc/perf/hv-gpci.c
+++ b/arch/powerpc/perf/hv-gpci.c
@@ -164,6 +164,20 @@ static unsigned long single_gpci_request(u32 req, u32 starting_index,
 
 	ret = plpar_hcall_norets(H_GET_PERF_COUNTER_INFO,
 			virt_to_phys(arg), HGPCI_REQ_BUFFER_SIZE);
+
+	/*
+	 * ret value as 'H_PARAMETER' with detail_rc as 'GEN_BUF_TOO_SMALL',
+	 * specifies that the current buffer size cannot accommodate
+	 * all the information and a partial buffer returned.
+	 * Since in this function we are only accessing data for a given starting index,
+	 * we don't need to accommodate whole data and can get required count by
+	 * accessing first entry data.
+	 * Hence hcall fails only incase the ret value is other than H_SUCCESS or
+	 * H_PARAMETER with detail_rc value as GEN_BUF_TOO_SMALL(0x1B).
+	 */
+	if (ret == H_PARAMETER && be32_to_cpu(arg->params.detail_rc) == 0x1B)
+		ret = 0;
+
 	if (ret) {
 		pr_devel("hcall failed: 0x%lx\n", ret);
 		goto out;
@@ -228,6 +242,7 @@ static int h_gpci_event_init(struct perf_event *event)
 {
 	u64 count;
 	u8 length;
+	unsigned long ret;
 
 	/* Not our event */
 	if (event->attr.type != event->pmu->type)
@@ -258,13 +273,23 @@ static int h_gpci_event_init(struct perf_event *event)
 	}
 
 	/* check if the request works... */
-	if (single_gpci_request(event_get_request(event),
+	ret = single_gpci_request(event_get_request(event),
 				event_get_starting_index(event),
 				event_get_secondary_index(event),
 				event_get_counter_info_version(event),
 				event_get_offset(event),
 				length,
-				&count)) {
+				&count);
+
+	/*
+	 * ret value as H_AUTHORITY implies that partition is not permitted to retrieve
+	 * performance information, and required to set
+	 * "Enable Performance Information Collection" option.
+	 */
+	if (ret == H_AUTHORITY)
+		return -EPERM;
+
+	if (ret) {
 		pr_devel("gpci hcall failed\n");
 		return -EINVAL;
 	}
-- 
2.43.0

[PATCH 5.10 179/238] drm/msm/dpu: add division of drm_display_mode's hskew parameter

[Sasha Levin]

From: Paloma Arellano <quic_parellan@quicinc.com>

[ Upstream commit 551ee0f210991d25f336bc27262353bfe99d3eed ]

Setting up the timing engine when the physical encoder has a split role
neglects dividing the drm_display_mode's hskew parameter. Let's fix this
since this must also be done in preparation for implementing YUV420 over
DP.

Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/579605/
Link: https://lore.kernel.org/r/20240222194025.25329-3-quic_parellan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index 805e059b50b71..33880f66625e6 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -265,12 +265,14 @@ static void dpu_encoder_phys_vid_setup_timing_engine(
 		mode.htotal >>= 1;
 		mode.hsync_start >>= 1;
 		mode.hsync_end >>= 1;
+		mode.hskew >>= 1;
 
 		DPU_DEBUG_VIDENC(phys_enc,
-			"split_role %d, halve horizontal %d %d %d %d\n",
+			"split_role %d, halve horizontal %d %d %d %d %d\n",
 			phys_enc->split_role,
 			mode.hdisplay, mode.htotal,
-			mode.hsync_start, mode.hsync_end);
+			mode.hsync_start, mode.hsync_end,
+			mode.hskew);
 	}
 
 	drm_mode_to_intf_timing_params(phys_enc, &mode, &timing_params);
-- 
2.43.0

[PATCH 5.10 180/238] powerpc/embedded6xx: Fix no previous prototype for avr_uart_send() etc.

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit 20933531be0577cdd782216858c26150dbc7936f ]

Move the prototypes into mpc10x.h which is included by all the relevant
C files, fixes:

  arch/powerpc/platforms/embedded6xx/ls_uart.c:59:6: error: no previous prototype for 'avr_uart_configure'
  arch/powerpc/platforms/embedded6xx/ls_uart.c:82:6: error: no previous prototype for 'avr_uart_send'

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240305123410.3306253-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/embedded6xx/linkstation.c | 3 ---
 arch/powerpc/platforms/embedded6xx/mpc10x.h      | 3 +++
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c
index f514d5d28cd4f..3f3821eb4c36b 100644
--- a/arch/powerpc/platforms/embedded6xx/linkstation.c
+++ b/arch/powerpc/platforms/embedded6xx/linkstation.c
@@ -97,9 +97,6 @@ static void __init linkstation_init_IRQ(void)
 	mpic_init(mpic);
 }
 
-extern void avr_uart_configure(void);
-extern void avr_uart_send(const char);
-
 static void __noreturn linkstation_restart(char *cmd)
 {
 	local_irq_disable();
diff --git a/arch/powerpc/platforms/embedded6xx/mpc10x.h b/arch/powerpc/platforms/embedded6xx/mpc10x.h
index 5ad12023e5628..ebc258fa4858d 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc10x.h
+++ b/arch/powerpc/platforms/embedded6xx/mpc10x.h
@@ -156,4 +156,7 @@ int mpc10x_disable_store_gathering(struct pci_controller *hose);
 /* For MPC107 boards that use the built-in openpic */
 void mpc10x_set_openpic(void);
 
+void avr_uart_configure(void);
+void avr_uart_send(const char c);
+
 #endif	/* __PPC_KERNEL_MPC10X_H */
-- 
2.43.0

[PATCH 5.10 181/238] leds: aw2013: Unlock mutex before destroying it

[Sasha Levin]

From: George Stark <gnstark@salutedevices.com>

[ Upstream commit 6969d0a2ba1adc9ba6a49b9805f24080896c255c ]

In the probe() callback in case of error mutex is destroyed being locked
which is not allowed so unlock the mutex before destroying.

Fixes: 59ea3c9faf32 ("leds: add aw2013 driver")
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231214173614.2820929-2-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/leds/leds-aw2013.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/leds/leds-aw2013.c b/drivers/leds/leds-aw2013.c
index 80d937454aeef..f7d9795ce5e1f 100644
--- a/drivers/leds/leds-aw2013.c
+++ b/drivers/leds/leds-aw2013.c
@@ -397,6 +397,7 @@ static int aw2013_probe(struct i2c_client *client)
 	regulator_disable(chip->vcc_regulator);
 
 error:
+	mutex_unlock(&chip->mutex);
 	mutex_destroy(&chip->mutex);
 	return ret;
 }
-- 
2.43.0

[PATCH 5.10 182/238] leds: sgm3140: Add missing timer cleanup and flash gpio control

[Sasha Levin]

From: Ondrej Jirman <megi@xff.cz>

[ Upstream commit 205c29887a333ee4b37596e6533373e38cb23947 ]

Enabling strobe and then setting brightness to 0 causes the driver to enter
invalid state after strobe end timer fires. We should cancel strobe mode
resources when changing brightness (aka torch mode).

Fixes: cef8ec8cbd21 ("leds: add sgm3140 driver")
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20240217191133.1757553-1-megi@xff.cz
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/leds/leds-sgm3140.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/leds/leds-sgm3140.c b/drivers/leds/leds-sgm3140.c
index f4f831570f11c..e72017b11098b 100644
--- a/drivers/leds/leds-sgm3140.c
+++ b/drivers/leds/leds-sgm3140.c
@@ -114,8 +114,11 @@ static int sgm3140_brightness_set(struct led_classdev *led_cdev,
 				"failed to enable regulator: %d\n", ret);
 			return ret;
 		}
+		gpiod_set_value_cansleep(priv->flash_gpio, 0);
 		gpiod_set_value_cansleep(priv->enable_gpio, 1);
 	} else {
+		del_timer_sync(&priv->powerdown_timer);
+		gpiod_set_value_cansleep(priv->flash_gpio, 0);
 		gpiod_set_value_cansleep(priv->enable_gpio, 0);
 		ret = regulator_disable(priv->vin_regulator);
 		if (ret) {
-- 
2.43.0

[PATCH 5.10 183/238] backlight: lm3630a: Initialize backlight_properties on init

[Sasha Levin]

From: Luca Weiss <luca@z3ntu.xyz>

[ Upstream commit ad9aeb0e3aa90ebdad5fabf9c21783740eb95907 ]

The backlight_properties struct should be initialized to zero before
using, otherwise there will be some random values in the struct.

Fixes: 0c2a665a648e ("backlight: add Backlight driver for lm3630 chip")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240220-lm3630a-fixups-v1-1-9ca62f7e4a33@z3ntu.xyz
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/backlight/lm3630a_bl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c
index 419b0334cf087..2aade66db3cf4 100644
--- a/drivers/video/backlight/lm3630a_bl.c
+++ b/drivers/video/backlight/lm3630a_bl.c
@@ -339,6 +339,7 @@ static int lm3630a_backlight_register(struct lm3630a_chip *pchip)
 	struct backlight_properties props;
 	const char *label;
 
+	memset(&props, 0, sizeof(struct backlight_properties));
 	props.type = BACKLIGHT_RAW;
 	if (pdata->leda_ctrl != LM3630A_LEDA_DISABLE) {
 		props.brightness = pdata->leda_init_brt;
-- 
2.43.0

[PATCH 5.10 184/238] backlight: lm3630a: Don't set bl->props.brightness in get_brightness

[Sasha Levin]

From: Luca Weiss <luca@z3ntu.xyz>

[ Upstream commit 4bf7ddd2d2f0f8826f25f74c7eba4e2c323a1446 ]

There's no need to set bl->props.brightness, the get_brightness function
is just supposed to return the current brightness and not touch the
struct.

With that done we can also remove the 'goto out' and just return the
value.

Fixes: 0c2a665a648e ("backlight: add Backlight driver for lm3630 chip")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240220-lm3630a-fixups-v1-2-9ca62f7e4a33@z3ntu.xyz
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/backlight/lm3630a_bl.c | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c
index 2aade66db3cf4..2134342c2c97d 100644
--- a/drivers/video/backlight/lm3630a_bl.c
+++ b/drivers/video/backlight/lm3630a_bl.c
@@ -229,7 +229,7 @@ static int lm3630a_bank_a_get_brightness(struct backlight_device *bl)
 		if (rval < 0)
 			goto out_i2c_err;
 		brightness |= rval;
-		goto out;
+		return brightness;
 	}
 
 	/* disable sleep */
@@ -240,11 +240,8 @@ static int lm3630a_bank_a_get_brightness(struct backlight_device *bl)
 	rval = lm3630a_read(pchip, REG_BRT_A);
 	if (rval < 0)
 		goto out_i2c_err;
-	brightness = rval;
+	return rval;
 
-out:
-	bl->props.brightness = brightness;
-	return bl->props.brightness;
 out_i2c_err:
 	dev_err(pchip->dev, "i2c failed to access register\n");
 	return 0;
@@ -306,7 +303,7 @@ static int lm3630a_bank_b_get_brightness(struct backlight_device *bl)
 		if (rval < 0)
 			goto out_i2c_err;
 		brightness |= rval;
-		goto out;
+		return brightness;
 	}
 
 	/* disable sleep */
@@ -317,11 +314,8 @@ static int lm3630a_bank_b_get_brightness(struct backlight_device *bl)
 	rval = lm3630a_read(pchip, REG_BRT_B);
 	if (rval < 0)
 		goto out_i2c_err;
-	brightness = rval;
+	return rval;
 
-out:
-	bl->props.brightness = brightness;
-	return bl->props.brightness;
 out_i2c_err:
 	dev_err(pchip->dev, "i2c failed to access register\n");
 	return 0;
-- 
2.43.0

[PATCH 5.10 185/238] backlight: da9052: Fully initialize backlight_properties during probe

[Sasha Levin]

From: Daniel Thompson <daniel.thompson@linaro.org>

[ Upstream commit 0285e9efaee8276305db5c52a59baf84e9731556 ]

props is stack allocated and the fields that are not explcitly set
by the probe function need to be zeroed or we'll get undefined behaviour
(especially so power/blank states)!

Fixes: 6ede3d832aaa ("backlight: add driver for DA9052/53 PMIC v1")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240220153532.76613-2-daniel.thompson@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/backlight/da9052_bl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/backlight/da9052_bl.c b/drivers/video/backlight/da9052_bl.c
index 882359dd288c0..aa00379392a0f 100644
--- a/drivers/video/backlight/da9052_bl.c
+++ b/drivers/video/backlight/da9052_bl.c
@@ -117,6 +117,7 @@ static int da9052_backlight_probe(struct platform_device *pdev)
 	wleds->led_reg = platform_get_device_id(pdev)->driver_data;
 	wleds->state = DA9052_WLEDS_OFF;
 
+	memset(&props, 0, sizeof(struct backlight_properties));
 	props.type = BACKLIGHT_RAW;
 	props.max_brightness = DA9052_MAX_BRIGHTNESS;
 
-- 
2.43.0

[PATCH 5.10 186/238] backlight: lm3639: Fully initialize backlight_properties during probe

[Sasha Levin]

From: Daniel Thompson <daniel.thompson@linaro.org>

[ Upstream commit abb5a5d951fbea3feb5c4ba179b89bb96a1d3462 ]

props is stack allocated and the fields that are not explcitly set
by the probe function need to be zeroed or we'll get undefined behaviour
(especially so power/blank states)!

Fixes: 0f59858d5119 ("backlight: add new lm3639 backlight driver")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240220153532.76613-3-daniel.thompson@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/backlight/lm3639_bl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/backlight/lm3639_bl.c b/drivers/video/backlight/lm3639_bl.c
index 48c04155a5f9d..bb617f4673e94 100644
--- a/drivers/video/backlight/lm3639_bl.c
+++ b/drivers/video/backlight/lm3639_bl.c
@@ -339,6 +339,7 @@ static int lm3639_probe(struct i2c_client *client,
 	}
 
 	/* backlight */
+	memset(&props, 0, sizeof(struct backlight_properties));
 	props.type = BACKLIGHT_RAW;
 	props.brightness = pdata->init_brt_led;
 	props.max_brightness = pdata->max_brt_led;
-- 
2.43.0

[PATCH 5.10 187/238] backlight: lp8788: Fully initialize backlight_properties during probe

[Sasha Levin]

From: Daniel Thompson <daniel.thompson@linaro.org>

[ Upstream commit 392346827fbe8a7fd573dfb145170d7949f639a6 ]

props is stack allocated and the fields that are not explcitly set
by the probe function need to be zeroed or we'll get undefined behaviour
(especially so power/blank states)!

Fixes: c5a51053cf3b ("backlight: add new lp8788 backlight driver")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240220153532.76613-4-daniel.thompson@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/backlight/lp8788_bl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/backlight/lp8788_bl.c b/drivers/video/backlight/lp8788_bl.c
index ba42f3fe0c739..d9b95dbd40d30 100644
--- a/drivers/video/backlight/lp8788_bl.c
+++ b/drivers/video/backlight/lp8788_bl.c
@@ -191,6 +191,7 @@ static int lp8788_backlight_register(struct lp8788_bl *bl)
 	int init_brt;
 	char *name;
 
+	memset(&props, 0, sizeof(struct backlight_properties));
 	props.type = BACKLIGHT_PLATFORM;
 	props.max_brightness = MAX_BRIGHTNESS;
 
-- 
2.43.0

[PATCH 5.10 188/238] arch/powerpc: Remove <linux/fb.h> from backlight code

[Sasha Levin]

From: Thomas Zimmermann <tzimmermann@suse.de>

[ Upstream commit 838f865802b9f26135ea7df4e30f89ac2f50c23e ]

Replace <linux/fb.h> with a forward declaration in <asm/backlight.h> to
resolve an unnecessary dependency. Remove pmac_backlight_curve_lookup()
and struct fb_info from source and header files. The function and the
framebuffer struct are unused. No functional changes.

v3:
	* Add Fixes tag (Christophe)
	* fix typos in commit message (Jani)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: d565dd3b0824 ("[PATCH] powerpc: More via-pmu backlight fixes")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # (powerpc)
Link: https://patchwork.freedesktop.org/patch/msgid/20240306122935.10626-4-tzimmermann@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/backlight.h        |  5 ++--
 arch/powerpc/platforms/powermac/backlight.c | 26 ---------------------
 2 files changed, 2 insertions(+), 29 deletions(-)

diff --git a/arch/powerpc/include/asm/backlight.h b/arch/powerpc/include/asm/backlight.h
index 1b5eab62ed047..061a910d74929 100644
--- a/arch/powerpc/include/asm/backlight.h
+++ b/arch/powerpc/include/asm/backlight.h
@@ -10,15 +10,14 @@
 #define __ASM_POWERPC_BACKLIGHT_H
 #ifdef __KERNEL__
 
-#include <linux/fb.h>
 #include <linux/mutex.h>
 
+struct backlight_device;
+
 /* For locking instructions, see the implementation file */
 extern struct backlight_device *pmac_backlight;
 extern struct mutex pmac_backlight_mutex;
 
-extern int pmac_backlight_curve_lookup(struct fb_info *info, int value);
-
 extern int pmac_has_backlight_type(const char *type);
 
 extern void pmac_backlight_key(int direction);
diff --git a/arch/powerpc/platforms/powermac/backlight.c b/arch/powerpc/platforms/powermac/backlight.c
index 32224cb489d75..eab339d2059d5 100644
--- a/arch/powerpc/platforms/powermac/backlight.c
+++ b/arch/powerpc/platforms/powermac/backlight.c
@@ -9,7 +9,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/fb.h>
 #include <linux/backlight.h>
 #include <linux/adb.h>
 #include <linux/pmu.h>
@@ -73,31 +72,6 @@ int pmac_has_backlight_type(const char *type)
 	return 0;
 }
 
-int pmac_backlight_curve_lookup(struct fb_info *info, int value)
-{
-	int level = (FB_BACKLIGHT_LEVELS - 1);
-
-	if (info && info->bl_dev) {
-		int i, max = 0;
-
-		/* Look for biggest value */
-		for (i = 0; i < FB_BACKLIGHT_LEVELS; i++)
-			max = max((int)info->bl_curve[i], max);
-
-		/* Look for nearest value */
-		for (i = 0; i < FB_BACKLIGHT_LEVELS; i++) {
-			int diff = abs(info->bl_curve[i] - value);
-			if (diff < max) {
-				max = diff;
-				level = i;
-			}
-		}
-
-	}
-
-	return level;
-}
-
 static void pmac_backlight_key_worker(struct work_struct *work)
 {
 	if (atomic_read(&kernel_backlight_disabled))
-- 
2.43.0

[PATCH 5.10 189/238] sparc32: Fix section mismatch in leon_pci_grpci

[Sasha Levin]

From: Sam Ravnborg <sam@ravnborg.org>

[ Upstream commit 24338a6ae13cb743ced77da1b3a12c83f08a0c96 ]

Passing a datastructre marked _initconst to platform_driver_register()
is wrong. Drop the __initconst notation.

This fixes the following warnings:

WARNING: modpost: vmlinux: section mismatch in reference: grpci1_of_driver+0x30 (section: .data) -> grpci1_of_match (section: .init.rodata)
WARNING: modpost: vmlinux: section mismatch in reference: grpci2_of_driver+0x30 (section: .data) -> grpci2_of_match (section: .init.rodata)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Fixes: 4154bb821f0b ("sparc: leon: grpci1: constify of_device_id")
Fixes: 03949b1cb9f1 ("sparc: leon: grpci2: constify of_device_id")
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240224-sam-fix-sparc32-all-builds-v2-7-1f186603c5c4@ravnborg.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/kernel/leon_pci_grpci1.c | 2 +-
 arch/sparc/kernel/leon_pci_grpci2.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/sparc/kernel/leon_pci_grpci1.c b/arch/sparc/kernel/leon_pci_grpci1.c
index e6935d0ac1ec9..c32590bdd3120 100644
--- a/arch/sparc/kernel/leon_pci_grpci1.c
+++ b/arch/sparc/kernel/leon_pci_grpci1.c
@@ -696,7 +696,7 @@ static int grpci1_of_probe(struct platform_device *ofdev)
 	return err;
 }
 
-static const struct of_device_id grpci1_of_match[] __initconst = {
+static const struct of_device_id grpci1_of_match[] = {
 	{
 	 .name = "GAISLER_PCIFBRG",
 	 },
diff --git a/arch/sparc/kernel/leon_pci_grpci2.c b/arch/sparc/kernel/leon_pci_grpci2.c
index ca22f93d90454..dd06abc61657f 100644
--- a/arch/sparc/kernel/leon_pci_grpci2.c
+++ b/arch/sparc/kernel/leon_pci_grpci2.c
@@ -887,7 +887,7 @@ static int grpci2_of_probe(struct platform_device *ofdev)
 	return err;
 }
 
-static const struct of_device_id grpci2_of_match[] __initconst = {
+static const struct of_device_id grpci2_of_match[] = {
 	{
 	 .name = "GAISLER_GRPCI2",
 	 },
-- 
2.43.0

[PATCH 5.10 190/238] clk: Fix clk_core_get NULL dereference

[Sasha Levin]

From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

[ Upstream commit e97fe4901e0f59a0bfd524578fe3768f8ca42428 ]

It is possible for clk_core_get to dereference a NULL in the following
sequence:

clk_core_get()
    of_clk_get_hw_from_clkspec()
        __of_clk_get_hw_from_provider()
            __clk_get_hw()

__clk_get_hw() can return NULL which is dereferenced by clk_core_get() at
hw->core.

Prior to commit dde4eff47c82 ("clk: Look for parents with clkdev based
clk_lookups") the check IS_ERR_OR_NULL() was performed which would have
caught the NULL.

Reading the description of this function it talks about returning NULL but
that cannot be so at the moment.

Update the function to check for hw before dereferencing it and return NULL
if hw is NULL.

Fixes: dde4eff47c82 ("clk: Look for parents with clkdev based clk_lookups")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20240302-linux-next-24-03-01-simple-clock-fixes-v1-1-25f348a5982b@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/clk.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 62572d59e7e38..aa2f1f8aa2994 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -425,6 +425,9 @@ static struct clk_core *clk_core_get(struct clk_core *core, u8 p_index)
 	if (IS_ERR(hw))
 		return ERR_CAST(hw);
 
+	if (!hw)
+		return NULL;
+
 	return hw->core;
 }
 
-- 
2.43.0

[PATCH 5.10 191/238] ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops

[Sasha Levin]

From: Athaariq Ardhiansyah <foss@athaariq.my.id>

[ Upstream commit c062166995c9e57d5cd508b332898f79da319802 ]

Realtek codec on HP Envy laptop series are heavily modified by vendor.
Therefore, need intervention to make it work properly. The patch fixes:

- B&O soundbar speakers (between lid and keyboard) activation
- Enable LED on mute button
- Add missing process coefficient which affects the output amplifier
- Volume control synchronization between B&O soundbar and side speakers
- Unmute headset output on several HP Envy models
- Auto-enable headset mic when plugged

This patch was tested on HP Envy x360 13-AR0107AU with Realtek ALC285

The only unsolved problem is output amplifier of all built-in speakers
is too weak, which causes volume of built-in speakers cannot be loud
as vendor's proprietary driver due to missing _DSD parameter in the
firmware. The solution is currently on research. Expected to has another
patch in the future.

Potential fix to related issues, need test before close those issues:

- https://bugzilla.kernel.org/show_bug.cgi?id=189331
- https://bugzilla.kernel.org/show_bug.cgi?id=216632
- https://bugzilla.kernel.org/show_bug.cgi?id=216311
- https://bugzilla.kernel.org/show_bug.cgi?id=213507

Signed-off-by: Athaariq Ardhiansyah <foss@athaariq.my.id>
Message-ID: <20240310140249.3695-1-foss@athaariq.my.id>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 63 +++++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 233449d982370..038837481c27c 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6612,6 +6612,60 @@ static void alc285_fixup_hp_spectre_x360(struct hda_codec *codec,
 	}
 }
 
+static void alc285_fixup_hp_envy_x360(struct hda_codec *codec,
+				      const struct hda_fixup *fix,
+				      int action)
+{
+	static const struct coef_fw coefs[] = {
+		WRITE_COEF(0x08, 0x6a0c), WRITE_COEF(0x0d, 0xa023),
+		WRITE_COEF(0x10, 0x0320), WRITE_COEF(0x1a, 0x8c03),
+		WRITE_COEF(0x25, 0x1800), WRITE_COEF(0x26, 0x003a),
+		WRITE_COEF(0x28, 0x1dfe), WRITE_COEF(0x29, 0xb014),
+		WRITE_COEF(0x2b, 0x1dfe), WRITE_COEF(0x37, 0xfe15),
+		WRITE_COEF(0x38, 0x7909), WRITE_COEF(0x45, 0xd489),
+		WRITE_COEF(0x46, 0x00f4), WRITE_COEF(0x4a, 0x21e0),
+		WRITE_COEF(0x66, 0x03f0), WRITE_COEF(0x67, 0x1000),
+		WRITE_COEF(0x6e, 0x1005), { }
+	};
+
+	static const struct hda_pintbl pincfgs[] = {
+		{ 0x12, 0xb7a60130 },  /* Internal microphone*/
+		{ 0x14, 0x90170150 },  /* B&O soundbar speakers */
+		{ 0x17, 0x90170153 },  /* Side speakers */
+		{ 0x19, 0x03a11040 },  /* Headset microphone */
+		{ }
+	};
+
+	switch (action) {
+	case HDA_FIXUP_ACT_PRE_PROBE:
+		snd_hda_apply_pincfgs(codec, pincfgs);
+
+		/* Fixes volume control problem for side speakers */
+		alc295_fixup_disable_dac3(codec, fix, action);
+
+		/* Fixes no sound from headset speaker */
+		snd_hda_codec_amp_stereo(codec, 0x21, HDA_OUTPUT, 0, -1, 0);
+
+		/* Auto-enable headset mic when plugged */
+		snd_hda_jack_set_gating_jack(codec, 0x19, 0x21);
+
+		/* Headset mic volume enhancement */
+		snd_hda_codec_set_pin_target(codec, 0x19, PIN_VREF50);
+		break;
+	case HDA_FIXUP_ACT_INIT:
+		alc_process_coef_fw(codec, coefs);
+		break;
+	case HDA_FIXUP_ACT_BUILD:
+		rename_ctl(codec, "Bass Speaker Playback Volume",
+			   "B&O-Tuned Playback Volume");
+		rename_ctl(codec, "Front Playback Switch",
+			   "B&O Soundbar Playback Switch");
+		rename_ctl(codec, "Bass Speaker Playback Switch",
+			   "Side Speaker Playback Switch");
+		break;
+	}
+}
+
 /* for hda_fixup_thinkpad_acpi() */
 #include "thinkpad_helper.c"
 
@@ -6819,6 +6873,7 @@ enum {
 	ALC280_FIXUP_HP_9480M,
 	ALC245_FIXUP_HP_X360_AMP,
 	ALC285_FIXUP_HP_SPECTRE_X360_EB1,
+	ALC285_FIXUP_HP_ENVY_X360,
 	ALC288_FIXUP_DELL_HEADSET_MODE,
 	ALC288_FIXUP_DELL1_MIC_NO_PRESENCE,
 	ALC288_FIXUP_DELL_XPS_13,
@@ -8614,6 +8669,12 @@ static const struct hda_fixup alc269_fixups[] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc285_fixup_hp_spectre_x360_eb1
 	},
+	[ALC285_FIXUP_HP_ENVY_X360] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc285_fixup_hp_envy_x360,
+		.chained = true,
+		.chain_id = ALC285_FIXUP_HP_GPIO_AMP_INIT,
+	},
 	[ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc285_fixup_ideapad_s740_coef,
@@ -9001,6 +9062,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x84e7, "HP Pavilion 15", ALC269_FIXUP_HP_MUTE_LED_MIC3),
 	SND_PCI_QUIRK(0x103c, 0x8519, "HP Spectre x360 15-df0xxx", ALC285_FIXUP_HP_SPECTRE_X360),
 	SND_PCI_QUIRK(0x103c, 0x8537, "HP ProBook 440 G6", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF),
+	SND_PCI_QUIRK(0x103c, 0x85de, "HP Envy x360 13-ar0xxx", ALC285_FIXUP_HP_ENVY_X360),
 	SND_PCI_QUIRK(0x103c, 0x860f, "HP ZBook 15 G6", ALC285_FIXUP_HP_GPIO_AMP_INIT),
 	SND_PCI_QUIRK(0x103c, 0x861f, "HP Elite Dragonfly G1", ALC285_FIXUP_HP_GPIO_AMP_INIT),
 	SND_PCI_QUIRK(0x103c, 0x869d, "HP", ALC236_FIXUP_HP_MUTE_LED),
@@ -9517,6 +9579,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = {
 	{.id = ALC295_FIXUP_HP_OMEN, .name = "alc295-hp-omen"},
 	{.id = ALC285_FIXUP_HP_SPECTRE_X360, .name = "alc285-hp-spectre-x360"},
 	{.id = ALC285_FIXUP_HP_SPECTRE_X360_EB1, .name = "alc285-hp-spectre-x360-eb1"},
+	{.id = ALC285_FIXUP_HP_ENVY_X360, .name = "alc285-hp-envy-x360"},
 	{.id = ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP, .name = "alc287-ideapad-bass-spk-amp"},
 	{.id = ALC623_FIXUP_LENOVO_THINKSTATION_P340, .name = "alc623-lenovo-thinkstation-p340"},
 	{.id = ALC255_FIXUP_ACER_HEADPHONE_AND_MIC, .name = "alc255-acer-headphone-and-mic"},
-- 
2.43.0

[PATCH 5.10 192/238] ALSA: usb-audio: Stop parsing channels bits when all channels are found.

[Sasha Levin]

From: Johan Carlsson <johan.carlsson@teenage.engineering>

[ Upstream commit a39d51ff1f52cd0b6fe7d379ac93bd8b4237d1b7 ]

If a usb audio device sets more bits than the amount of channels
it could write outside of the map array.

Signed-off-by: Johan Carlsson <johan.carlsson@teenage.engineering>
Fixes: 04324ccc75f9 ("ALSA: usb-audio: add channel map support")
Message-ID: <20240313081509.9801-1-johan.carlsson@teenage.engineering>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/stream.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/sound/usb/stream.c b/sound/usb/stream.c
index c4f4585f9b851..f51e901a9689e 100644
--- a/sound/usb/stream.c
+++ b/sound/usb/stream.c
@@ -301,9 +301,12 @@ static struct snd_pcm_chmap_elem *convert_chmap(int channels, unsigned int bits,
 	c = 0;
 
 	if (bits) {
-		for (; bits && *maps; maps++, bits >>= 1)
+		for (; bits && *maps; maps++, bits >>= 1) {
 			if (bits & 1)
 				chmap->map[c++] = *maps;
+			if (c == chmap->channels)
+				break;
+		}
 	} else {
 		/* If we're missing wChannelConfig, then guess something
 		    to make sure the channel map is not skipped entirely */
-- 
2.43.0

[PATCH 5.10 193/238] RDMA/srpt: Do not register event handler until srpt device is fully setup

[Sasha Levin]

From: William Kucharski <william.kucharski@oracle.com>

[ Upstream commit c21a8870c98611e8f892511825c9607f1e2cd456 ]

Upon rare occasions, KASAN reports a use-after-free Write
in srpt_refresh_port().

This seems to be because an event handler is registered before the
srpt device is fully setup and a race condition upon error may leave a
partially setup event handler in place.

Instead, only register the event handler after srpt device initialization
is complete.

Fixes: a42d985bd5b2 ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Signed-off-by: William Kucharski <william.kucharski@oracle.com>
Link: https://lore.kernel.org/r/20240202091549.991784-2-william.kucharski@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/ulp/srpt/ib_srpt.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c
index 41abf9cf11c67..960f870a952a5 100644
--- a/drivers/infiniband/ulp/srpt/ib_srpt.c
+++ b/drivers/infiniband/ulp/srpt/ib_srpt.c
@@ -3205,7 +3205,6 @@ static int srpt_add_one(struct ib_device *device)
 
 	INIT_IB_EVENT_HANDLER(&sdev->event_handler, sdev->device,
 			      srpt_event_handler);
-	ib_register_event_handler(&sdev->event_handler);
 
 	for (i = 1; i <= sdev->device->phys_port_cnt; i++) {
 		sport = &sdev->port[i - 1];
@@ -3228,6 +3227,7 @@ static int srpt_add_one(struct ib_device *device)
 		}
 	}
 
+	ib_register_event_handler(&sdev->event_handler);
 	spin_lock(&srpt_dev_lock);
 	list_add_tail(&sdev->list, &srpt_dev_list);
 	spin_unlock(&srpt_dev_lock);
@@ -3238,7 +3238,6 @@ static int srpt_add_one(struct ib_device *device)
 
 err_port:
 	srpt_unregister_mad_agent(sdev, i);
-	ib_unregister_event_handler(&sdev->event_handler);
 err_cm:
 	if (sdev->cm_id)
 		ib_destroy_cm_id(sdev->cm_id);
-- 
2.43.0

[PATCH 5.10 194/238] f2fs: compress: fix to check unreleased compressed cluster

[Sasha Levin]

From: Sheng Yong <shengyong@oppo.com>

[ Upstream commit eb8fbaa53374e0a2d4381190abfe708481517bbb ]

Compressed cluster may not be released due to we can fail in
release_compress_blocks(), fix to handle reserved compressed
cluster correctly in reserve_compress_blocks().

Fixes: 4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Sheng Yong <shengyong@oppo.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/file.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 55818bd510fb0..40e805014f719 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -3663,7 +3663,13 @@ static int reserve_compress_blocks(struct dnode_of_data *dn, pgoff_t count)
 				goto next;
 			}
 
-			if (__is_valid_data_blkaddr(blkaddr)) {
+			/*
+			 * compressed cluster was not released due to it
+			 * fails in release_compress_blocks(), so NEW_ADDR
+			 * is a possible case.
+			 */
+			if (blkaddr == NEW_ADDR ||
+				__is_valid_data_blkaddr(blkaddr)) {
 				compr_blocks++;
 				continue;
 			}
@@ -3673,6 +3679,11 @@ static int reserve_compress_blocks(struct dnode_of_data *dn, pgoff_t count)
 		}
 
 		reserved = cluster_size - compr_blocks;
+
+		/* for the case all blocks in cluster were reserved */
+		if (reserved == 1)
+			goto next;
+
 		ret = inc_valid_block_count(sbi, dn->inode, &reserved);
 		if (ret)
 			return ret;
-- 
2.43.0

[PATCH 5.10 195/238] scsi: csiostor: Avoid function pointer casts

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 9f3dbcb5632d6876226031d552ef6163bb3ad215 ]

csiostor uses function pointer casts to keep the csio_ln_ev state machine
hidden, but this causes warnings about control flow integrity (KCFI)
violations in clang-16 and higher:

drivers/scsi/csiostor/csio_lnode.c:1098:33: error: cast from 'void (*)(struct csio_lnode *, enum csio_ln_ev)' to 'csio_sm_state_t' (aka 'void (*)(void *, unsigned int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
 1098 |         return (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_ready));
      |                                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/csiostor/csio_lnode.c:1369:29: error: cast from 'void (*)(struct csio_lnode *, enum csio_ln_ev)' to 'csio_sm_state_t' (aka 'void (*)(void *, unsigned int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
 1369 |         if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_uninit)) {
      |                                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/csiostor/csio_lnode.c:1373:29: error: cast from 'void (*)(struct csio_lnode *, enum csio_ln_ev)' to 'csio_sm_state_t' (aka 'void (*)(void *, unsigned int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
 1373 |         if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_ready)) {
      |                                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/csiostor/csio_lnode.c:1377:29: error: cast from 'void (*)(struct csio_lnode *, enum csio_ln_ev)' to 'csio_sm_state_t' (aka 'void (*)(void *, unsigned int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
 1377 |         if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_offline)) {
      |                                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Move the enum into a shared header so the correct types can be used without
the need for casts.

Fixes: a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240213100518.457623-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/csiostor/csio_defs.h  | 18 ++++++++++++++++--
 drivers/scsi/csiostor/csio_lnode.c |  8 ++++----
 drivers/scsi/csiostor/csio_lnode.h | 13 -------------
 3 files changed, 20 insertions(+), 19 deletions(-)

diff --git a/drivers/scsi/csiostor/csio_defs.h b/drivers/scsi/csiostor/csio_defs.h
index c38017b4af982..e50e93e7fe5a1 100644
--- a/drivers/scsi/csiostor/csio_defs.h
+++ b/drivers/scsi/csiostor/csio_defs.h
@@ -73,7 +73,21 @@ csio_list_deleted(struct list_head *list)
 #define csio_list_prev(elem)	(((struct list_head *)(elem))->prev)
 
 /* State machine */
-typedef void (*csio_sm_state_t)(void *, uint32_t);
+struct csio_lnode;
+
+/* State machine evets */
+enum csio_ln_ev {
+	CSIO_LNE_NONE = (uint32_t)0,
+	CSIO_LNE_LINKUP,
+	CSIO_LNE_FAB_INIT_DONE,
+	CSIO_LNE_LINK_DOWN,
+	CSIO_LNE_DOWN_LINK,
+	CSIO_LNE_LOGO,
+	CSIO_LNE_CLOSE,
+	CSIO_LNE_MAX_EVENT,
+};
+
+typedef void (*csio_sm_state_t)(struct csio_lnode *ln, enum csio_ln_ev evt);
 
 struct csio_sm {
 	struct list_head	sm_list;
@@ -83,7 +97,7 @@ struct csio_sm {
 static inline void
 csio_set_state(void *smp, void *state)
 {
-	((struct csio_sm *)smp)->sm_state = (csio_sm_state_t)state;
+	((struct csio_sm *)smp)->sm_state = state;
 }
 
 static inline void
diff --git a/drivers/scsi/csiostor/csio_lnode.c b/drivers/scsi/csiostor/csio_lnode.c
index d5ac938970232..5b3ffefae476d 100644
--- a/drivers/scsi/csiostor/csio_lnode.c
+++ b/drivers/scsi/csiostor/csio_lnode.c
@@ -1095,7 +1095,7 @@ csio_handle_link_down(struct csio_hw *hw, uint8_t portid, uint32_t fcfi,
 int
 csio_is_lnode_ready(struct csio_lnode *ln)
 {
-	return (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_ready));
+	return (csio_get_state(ln) == csio_lns_ready);
 }
 
 /*****************************************************************************/
@@ -1366,15 +1366,15 @@ csio_free_fcfinfo(struct kref *kref)
 void
 csio_lnode_state_to_str(struct csio_lnode *ln, int8_t *str)
 {
-	if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_uninit)) {
+	if (csio_get_state(ln) == csio_lns_uninit) {
 		strcpy(str, "UNINIT");
 		return;
 	}
-	if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_ready)) {
+	if (csio_get_state(ln) == csio_lns_ready) {
 		strcpy(str, "READY");
 		return;
 	}
-	if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_offline)) {
+	if (csio_get_state(ln) == csio_lns_offline) {
 		strcpy(str, "OFFLINE");
 		return;
 	}
diff --git a/drivers/scsi/csiostor/csio_lnode.h b/drivers/scsi/csiostor/csio_lnode.h
index 372a67d122d38..607698a0f0631 100644
--- a/drivers/scsi/csiostor/csio_lnode.h
+++ b/drivers/scsi/csiostor/csio_lnode.h
@@ -53,19 +53,6 @@
 extern int csio_fcoe_rnodes;
 extern int csio_fdmi_enable;
 
-/* State machine evets */
-enum csio_ln_ev {
-	CSIO_LNE_NONE = (uint32_t)0,
-	CSIO_LNE_LINKUP,
-	CSIO_LNE_FAB_INIT_DONE,
-	CSIO_LNE_LINK_DOWN,
-	CSIO_LNE_DOWN_LINK,
-	CSIO_LNE_LOGO,
-	CSIO_LNE_CLOSE,
-	CSIO_LNE_MAX_EVENT,
-};
-
-
 struct csio_fcf_info {
 	struct list_head	list;
 	uint8_t			priority;
-- 
2.43.0

[PATCH 5.10 196/238] RDMA/device: Fix a race between mad_client and cm_client init

[Sasha Levin]

From: Shifeng Li <lishifeng@sangfor.com.cn>

[ Upstream commit 7a8bccd8b29c321ac181369b42b04fecf05f98e2 ]

The mad_client will be initialized in enable_device_and_get(), while the
devices_rwsem will be downgraded to a read semaphore. There is a window
that leads to the failed initialization for cm_client, since it can not
get matched mad port from ib_mad_port_list, and the matched mad port will
be added to the list after that.

    mad_client    |                       cm_client
------------------|--------------------------------------------------------
ib_register_device|
enable_device_and_get
down_write(&devices_rwsem)
xa_set_mark(&devices, DEVICE_REGISTERED)
downgrade_write(&devices_rwsem)
                  |
                  |ib_cm_init
                  |ib_register_client(&cm_client)
                  |down_read(&devices_rwsem)
                  |xa_for_each_marked (&devices, DEVICE_REGISTERED)
                  |add_client_context
                  |cm_add_one
                  |ib_register_mad_agent
                  |ib_get_mad_port
                  |__ib_get_mad_port
                  |list_for_each_entry(entry, &ib_mad_port_list, port_list)
                  |return NULL
                  |up_read(&devices_rwsem)
                  |
add_client_context|
ib_mad_init_device|
ib_mad_port_open  |
list_add_tail(&port_priv->port_list, &ib_mad_port_list)
up_read(&devices_rwsem)
                  |

Fix it by using down_write(&devices_rwsem) in ib_register_client().

Fixes: d0899892edd0 ("RDMA/device: Provide APIs from the core code to help unregistration")
Link: https://lore.kernel.org/r/20240203035313.98991-1-lishifeng@sangfor.com.cn
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/device.c | 37 +++++++++++++++++++-------------
 1 file changed, 22 insertions(+), 15 deletions(-)

diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c
index 3c29fd04b3016..94c3bad72cc59 100644
--- a/drivers/infiniband/core/device.c
+++ b/drivers/infiniband/core/device.c
@@ -1686,7 +1686,7 @@ static int assign_client_id(struct ib_client *client)
 {
 	int ret;
 
-	down_write(&clients_rwsem);
+	lockdep_assert_held(&clients_rwsem);
 	/*
 	 * The add/remove callbacks must be called in FIFO/LIFO order. To
 	 * achieve this we assign client_ids so they are sorted in
@@ -1695,14 +1695,11 @@ static int assign_client_id(struct ib_client *client)
 	client->client_id = highest_client_id;
 	ret = xa_insert(&clients, client->client_id, client, GFP_KERNEL);
 	if (ret)
-		goto out;
+		return ret;
 
 	highest_client_id++;
 	xa_set_mark(&clients, client->client_id, CLIENT_REGISTERED);
-
-out:
-	up_write(&clients_rwsem);
-	return ret;
+	return 0;
 }
 
 static void remove_client_id(struct ib_client *client)
@@ -1732,25 +1729,35 @@ int ib_register_client(struct ib_client *client)
 {
 	struct ib_device *device;
 	unsigned long index;
+	bool need_unreg = false;
 	int ret;
 
 	refcount_set(&client->uses, 1);
 	init_completion(&client->uses_zero);
+
+	/*
+	 * The devices_rwsem is held in write mode to ensure that a racing
+	 * ib_register_device() sees a consisent view of clients and devices.
+	 */
+	down_write(&devices_rwsem);
+	down_write(&clients_rwsem);
 	ret = assign_client_id(client);
 	if (ret)
-		return ret;
+		goto out;
 
-	down_read(&devices_rwsem);
+	need_unreg = true;
 	xa_for_each_marked (&devices, index, device, DEVICE_REGISTERED) {
 		ret = add_client_context(device, client);
-		if (ret) {
-			up_read(&devices_rwsem);
-			ib_unregister_client(client);
-			return ret;
-		}
+		if (ret)
+			goto out;
 	}
-	up_read(&devices_rwsem);
-	return 0;
+	ret = 0;
+out:
+	up_write(&clients_rwsem);
+	up_write(&devices_rwsem);
+	if (need_unreg && ret)
+		ib_unregister_client(client);
+	return ret;
 }
 EXPORT_SYMBOL(ib_register_client);
 
-- 
2.43.0

[PATCH 5.10 197/238] scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit b69600231f751304db914c63b937f7098ed2895c ]

Some callback functions used here take a boolean argument, others take a
status argument. This breaks KCFI type checking, so clang now warns about
the function pointer cast:

drivers/scsi/bfa/bfad_bsg.c:2138:29: error: cast from 'void (*)(void *, enum bfa_status)' to 'bfa_cb_cbfn_t' (aka 'void (*)(void *, enum bfa_boolean)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]

Assuming the code is actually correct here and the callers always match the
argument types of the callee, rework this to replace the explicit cast with
a union of the two pointer types. This does not change the behavior of the
code, so if something is actually broken here, a larger rework may be
necessary.

Fixes: 37ea0558b87a ("[SCSI] bfa: Added support to collect and reset fcport stats")
Fixes: 3ec4f2c8bff2 ("[SCSI] bfa: Added support to configure QOS and collect stats.")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240222124433.2046570-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/bfa/bfa.h      |  9 ++++++++-
 drivers/scsi/bfa/bfa_core.c |  4 +---
 drivers/scsi/bfa/bfa_ioc.h  |  8 ++++++--
 drivers/scsi/bfa/bfad_bsg.c | 11 ++++-------
 4 files changed, 19 insertions(+), 13 deletions(-)

diff --git a/drivers/scsi/bfa/bfa.h b/drivers/scsi/bfa/bfa.h
index 7bd2ba1ad4d11..f30fe324e6ecc 100644
--- a/drivers/scsi/bfa/bfa.h
+++ b/drivers/scsi/bfa/bfa.h
@@ -20,7 +20,6 @@
 struct bfa_s;
 
 typedef void (*bfa_isr_func_t) (struct bfa_s *bfa, struct bfi_msg_s *m);
-typedef void (*bfa_cb_cbfn_status_t) (void *cbarg, bfa_status_t status);
 
 /*
  * Interrupt message handlers
@@ -437,4 +436,12 @@ struct bfa_cb_pending_q_s {
 	(__qe)->data = (__data);				\
 } while (0)
 
+#define bfa_pending_q_init_status(__qe, __cbfn, __cbarg, __data) do {	\
+	bfa_q_qe_init(&((__qe)->hcb_qe.qe));			\
+	(__qe)->hcb_qe.cbfn_status = (__cbfn);			\
+	(__qe)->hcb_qe.cbarg = (__cbarg);			\
+	(__qe)->hcb_qe.pre_rmv = BFA_TRUE;			\
+	(__qe)->data = (__data);				\
+} while (0)
+
 #endif /* __BFA_H__ */
diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c
index 6846ca8f7313c..3438d0b8ba062 100644
--- a/drivers/scsi/bfa/bfa_core.c
+++ b/drivers/scsi/bfa/bfa_core.c
@@ -1907,15 +1907,13 @@ bfa_comp_process(struct bfa_s *bfa, struct list_head *comp_q)
 	struct list_head		*qe;
 	struct list_head		*qen;
 	struct bfa_cb_qe_s	*hcb_qe;
-	bfa_cb_cbfn_status_t	cbfn;
 
 	list_for_each_safe(qe, qen, comp_q) {
 		hcb_qe = (struct bfa_cb_qe_s *) qe;
 		if (hcb_qe->pre_rmv) {
 			/* qe is invalid after return, dequeue before cbfn() */
 			list_del(qe);
-			cbfn = (bfa_cb_cbfn_status_t)(hcb_qe->cbfn);
-			cbfn(hcb_qe->cbarg, hcb_qe->fw_status);
+			hcb_qe->cbfn_status(hcb_qe->cbarg, hcb_qe->fw_status);
 		} else
 			hcb_qe->cbfn(hcb_qe->cbarg, BFA_TRUE);
 	}
diff --git a/drivers/scsi/bfa/bfa_ioc.h b/drivers/scsi/bfa/bfa_ioc.h
index 933a1c3890ff5..5e568d6d7b261 100644
--- a/drivers/scsi/bfa/bfa_ioc.h
+++ b/drivers/scsi/bfa/bfa_ioc.h
@@ -361,14 +361,18 @@ struct bfa_reqq_wait_s {
 	void	*cbarg;
 };
 
-typedef void	(*bfa_cb_cbfn_t) (void *cbarg, bfa_boolean_t complete);
+typedef void (*bfa_cb_cbfn_t) (void *cbarg, bfa_boolean_t complete);
+typedef void (*bfa_cb_cbfn_status_t) (void *cbarg, bfa_status_t status);
 
 /*
  * Generic BFA callback element.
  */
 struct bfa_cb_qe_s {
 	struct list_head	qe;
-	bfa_cb_cbfn_t	cbfn;
+	union {
+		bfa_cb_cbfn_status_t	cbfn_status;
+		bfa_cb_cbfn_t		cbfn;
+	};
 	bfa_boolean_t	once;
 	bfa_boolean_t	pre_rmv;	/* set for stack based qe(s) */
 	bfa_status_t	fw_status;	/* to access fw status in comp proc */
diff --git a/drivers/scsi/bfa/bfad_bsg.c b/drivers/scsi/bfa/bfad_bsg.c
index fc515424ca88d..eb589f9e8cfb5 100644
--- a/drivers/scsi/bfa/bfad_bsg.c
+++ b/drivers/scsi/bfa/bfad_bsg.c
@@ -2135,8 +2135,7 @@ bfad_iocmd_fcport_get_stats(struct bfad_s *bfad, void *cmd)
 	struct bfa_cb_pending_q_s cb_qe;
 
 	init_completion(&fcomp.comp);
-	bfa_pending_q_init(&cb_qe, (bfa_cb_cbfn_t)bfad_hcb_comp,
-			   &fcomp, &iocmd->stats);
+	bfa_pending_q_init_status(&cb_qe, bfad_hcb_comp, &fcomp, &iocmd->stats);
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	iocmd->status = bfa_fcport_get_stats(&bfad->bfa, &cb_qe);
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
@@ -2159,7 +2158,7 @@ bfad_iocmd_fcport_reset_stats(struct bfad_s *bfad, void *cmd)
 	struct bfa_cb_pending_q_s cb_qe;
 
 	init_completion(&fcomp.comp);
-	bfa_pending_q_init(&cb_qe, (bfa_cb_cbfn_t)bfad_hcb_comp, &fcomp, NULL);
+	bfa_pending_q_init_status(&cb_qe, bfad_hcb_comp, &fcomp, NULL);
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	iocmd->status = bfa_fcport_clear_stats(&bfad->bfa, &cb_qe);
@@ -2443,8 +2442,7 @@ bfad_iocmd_qos_get_stats(struct bfad_s *bfad, void *cmd)
 	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(&bfad->bfa);
 
 	init_completion(&fcomp.comp);
-	bfa_pending_q_init(&cb_qe, (bfa_cb_cbfn_t)bfad_hcb_comp,
-			   &fcomp, &iocmd->stats);
+	bfa_pending_q_init_status(&cb_qe, bfad_hcb_comp, &fcomp, &iocmd->stats);
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	WARN_ON(!bfa_ioc_get_fcmode(&bfad->bfa.ioc));
@@ -2474,8 +2472,7 @@ bfad_iocmd_qos_reset_stats(struct bfad_s *bfad, void *cmd)
 	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(&bfad->bfa);
 
 	init_completion(&fcomp.comp);
-	bfa_pending_q_init(&cb_qe, (bfa_cb_cbfn_t)bfad_hcb_comp,
-			   &fcomp, NULL);
+	bfa_pending_q_init_status(&cb_qe, bfad_hcb_comp, &fcomp, NULL);
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	WARN_ON(!bfa_ioc_get_fcmode(&bfad->bfa.ioc));
-- 
2.43.0

[PATCH 5.10 198/238] net: sunrpc: Fix an off by one in rpc_sockaddr2uaddr()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit d6f4de70f73a106986ee315d7d512539f2f3303a ]

The intent is to check if the strings' are truncated or not. So, >= should
be used instead of >, because strlcat() and snprintf() return the length of
the output, excluding the trailing NULL.

Fixes: a02d69261134 ("SUNRPC: Provide functions for managing universal addresses")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/addr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/sunrpc/addr.c b/net/sunrpc/addr.c
index d435bffc61999..97ff11973c493 100644
--- a/net/sunrpc/addr.c
+++ b/net/sunrpc/addr.c
@@ -284,10 +284,10 @@ char *rpc_sockaddr2uaddr(const struct sockaddr *sap, gfp_t gfp_flags)
 	}
 
 	if (snprintf(portbuf, sizeof(portbuf),
-		     ".%u.%u", port >> 8, port & 0xff) > (int)sizeof(portbuf))
+		     ".%u.%u", port >> 8, port & 0xff) >= (int)sizeof(portbuf))
 		return NULL;
 
-	if (strlcat(addrbuf, portbuf, sizeof(addrbuf)) > sizeof(addrbuf))
+	if (strlcat(addrbuf, portbuf, sizeof(addrbuf)) >= sizeof(addrbuf))
 		return NULL;
 
 	return kstrdup(addrbuf, gfp_flags);
-- 
2.43.0

[PATCH 5.10 199/238] NFSv4.2: fix nfs4_listxattr kernel BUG at mm/usercopy.c:102

[Sasha Levin]

From: Jorge Mora <jmora1300@gmail.com>

[ Upstream commit 251a658bbfceafb4d58c76b77682c8bf7bcfad65 ]

A call to listxattr() with a buffer size = 0 returns the actual
size of the buffer needed for a subsequent call. When size > 0,
nfs4_listxattr() does not return an error because either
generic_listxattr() or nfs4_listxattr_nfs4_label() consumes
exactly all the bytes then size is 0 when calling
nfs4_listxattr_nfs4_user() which then triggers the following
kernel BUG:

  [   99.403778] kernel BUG at mm/usercopy.c:102!
  [   99.404063] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
  [   99.408463] CPU: 0 PID: 3310 Comm: python3 Not tainted 6.6.0-61.fc40.aarch64 #1
  [   99.415827] Call trace:
  [   99.415985]  usercopy_abort+0x70/0xa0
  [   99.416227]  __check_heap_object+0x134/0x158
  [   99.416505]  check_heap_object+0x150/0x188
  [   99.416696]  __check_object_size.part.0+0x78/0x168
  [   99.416886]  __check_object_size+0x28/0x40
  [   99.417078]  listxattr+0x8c/0x120
  [   99.417252]  path_listxattr+0x78/0xe0
  [   99.417476]  __arm64_sys_listxattr+0x28/0x40
  [   99.417723]  invoke_syscall+0x78/0x100
  [   99.417929]  el0_svc_common.constprop.0+0x48/0xf0
  [   99.418186]  do_el0_svc+0x24/0x38
  [   99.418376]  el0_svc+0x3c/0x110
  [   99.418554]  el0t_64_sync_handler+0x120/0x130
  [   99.418788]  el0t_64_sync+0x194/0x198
  [   99.418994] Code: aa0003e3 d000a3e0 91310000 97f49bdb (d4210000)

Issue is reproduced when generic_listxattr() returns 'system.nfs4_acl',
thus calling lisxattr() with size = 16 will trigger the bug.

Add check on nfs4_listxattr() to return ERANGE error when it is
called with size > 0 and the return value is greater than size.

Fixes: 012a211abd5d ("NFSv4.2: hook in the user extended attribute handlers")
Signed-off-by: Jorge Mora <mora@netapp.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4proc.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 7c3c96ed60853..8e546e6a56198 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -10370,29 +10370,33 @@ const struct nfs4_minor_version_ops *nfs_v4_minor_ops[] = {
 static ssize_t nfs4_listxattr(struct dentry *dentry, char *list, size_t size)
 {
 	ssize_t error, error2, error3;
+	size_t left = size;
 
-	error = generic_listxattr(dentry, list, size);
+	error = generic_listxattr(dentry, list, left);
 	if (error < 0)
 		return error;
 	if (list) {
 		list += error;
-		size -= error;
+		left -= error;
 	}
 
-	error2 = nfs4_listxattr_nfs4_label(d_inode(dentry), list, size);
+	error2 = nfs4_listxattr_nfs4_label(d_inode(dentry), list, left);
 	if (error2 < 0)
 		return error2;
 
 	if (list) {
 		list += error2;
-		size -= error2;
+		left -= error2;
 	}
 
-	error3 = nfs4_listxattr_nfs4_user(d_inode(dentry), list, size);
+	error3 = nfs4_listxattr_nfs4_user(d_inode(dentry), list, left);
 	if (error3 < 0)
 		return error3;
 
-	return error + error2 + error3;
+	error += error2 + error3;
+	if (size && error > size)
+		return -ERANGE;
+	return error;
 }
 
 static void nfs4_enable_swap(struct inode *inode)
-- 
2.43.0

[PATCH 5.10 200/238] NFSv4.2: fix listxattr maximum XDR buffer size

[Sasha Levin]

From: Jorge Mora <jmora1300@gmail.com>

[ Upstream commit bcac8bff90a6ee1629f90669cdb9d28fb86049b0 ]

Switch order of operations to avoid creating a short XDR buffer:
e.g., buflen = 12, old xdrlen = 12, new xdrlen = 20.

Having a short XDR buffer leads to lxa_maxcount be a few bytes
less than what is needed to retrieve the whole list when using
a buflen as returned by a call with size = 0:
    buflen = listxattr(path, NULL, 0);
    buf = malloc(buflen);
    buflen = listxattr(path, buf, buflen);

For a file with one attribute (name = '123456'), the first call
with size = 0 will return buflen = 12 ('user.123456\x00').
The second call with size = 12, sends LISTXATTRS with
lxa_maxcount = 12 + 8 (cookie) + 4 (array count) = 24. The
XDR buffer needs 8 (cookie) + 4 (array count) + 4 (name count)
+ 6 (name len) + 2 (padding) + 4 (eof) = 28 which is 4 bytes
shorter than the lxa_maxcount provided in the call.

Fixes: 04a5da690e8f ("NFSv4.2: define limits and sizes for user xattr handling")
Signed-off-by: Jorge Mora <mora@netapp.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs42.h | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/fs/nfs/nfs42.h b/fs/nfs/nfs42.h
index 0fe5aacbcfdf1..e7192d0eea3de 100644
--- a/fs/nfs/nfs42.h
+++ b/fs/nfs/nfs42.h
@@ -54,11 +54,14 @@ int nfs42_proc_removexattr(struct inode *inode, const char *name);
  * They would be 7 bytes long in the eventual buffer ("user.x\0"), and
  * 8 bytes long XDR-encoded.
  *
- * Include the trailing eof word as well.
+ * Include the trailing eof word as well and make the result a multiple
+ * of 4 bytes.
  */
 static inline u32 nfs42_listxattr_xdrsize(u32 buflen)
 {
-	return ((buflen / (XATTR_USER_PREFIX_LEN + 2)) * 8) + 4;
+	u32 size = 8 * buflen / (XATTR_USER_PREFIX_LEN + 2) + 4;
+
+	return (size + 3) & ~3;
 }
 #endif /* CONFIG_NFS_V4_2 */
 #endif /* __LINUX_FS_NFS_NFS4_2_H */
-- 
2.43.0

[PATCH 5.10 201/238] watchdog: stm32_iwdg: initialize default timeout

[Sasha Levin]

From: Ben Wolsieffer <ben.wolsieffer@hefring.com>

[ Upstream commit dbd7c0088b7f44aa0b9276ed3449df075a7b5b54 ]

The driver never sets a default timeout value, therefore it is
initialized to zero. When CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is
enabled, the watchdog is started during probe. The kernel is supposed to
automatically ping the watchdog from this point until userspace takes
over, but this does not happen if the configured timeout is zero. A zero
timeout causes watchdog_need_worker() to return false, so the heartbeat
worker does not run and the system therefore resets soon after the
driver is probed.

This patch fixes this by setting an arbitrary non-zero default timeout.
The default could be read from the hardware instead, but I didn't see
any reason to add this complexity.

This has been tested on an STM32F746.

Fixes: 85fdc63fe256 ("drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240228182723.12855-1-ben.wolsieffer@hefring.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/watchdog/stm32_iwdg.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/watchdog/stm32_iwdg.c b/drivers/watchdog/stm32_iwdg.c
index 25188d6bbe152..16dd1aab7c676 100644
--- a/drivers/watchdog/stm32_iwdg.c
+++ b/drivers/watchdog/stm32_iwdg.c
@@ -21,6 +21,8 @@
 #include <linux/platform_device.h>
 #include <linux/watchdog.h>
 
+#define DEFAULT_TIMEOUT 10
+
 /* IWDG registers */
 #define IWDG_KR		0x00 /* Key register */
 #define IWDG_PR		0x04 /* Prescaler Register */
@@ -254,6 +256,7 @@ static int stm32_iwdg_probe(struct platform_device *pdev)
 	wdd->parent = dev;
 	wdd->info = &stm32_iwdg_info;
 	wdd->ops = &stm32_iwdg_ops;
+	wdd->timeout = DEFAULT_TIMEOUT;
 	wdd->min_timeout = DIV_ROUND_UP((RLR_MIN + 1) * PR_MIN, wdt->rate);
 	wdd->max_hw_heartbeat_ms = ((RLR_MAX + 1) * wdt->data->max_prescaler *
 				    1000) / wdt->rate;
-- 
2.43.0

[PATCH 5.10 202/238] NFS: Fix an off by one in root_nfs_cat()

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 698ad1a538da0b6bf969cfee630b4e3a026afb87 ]

The intent is to check if 'dest' is truncated or not. So, >= should be
used instead of >, because strlcat() returns the length of 'dest' and 'src'
excluding the trailing NULL.

Fixes: 56463e50d1fc ("NFS: Use super.c for NFSROOT mount option parsing")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfsroot.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/nfs/nfsroot.c b/fs/nfs/nfsroot.c
index fa148308822cc..c2cf4ff628811 100644
--- a/fs/nfs/nfsroot.c
+++ b/fs/nfs/nfsroot.c
@@ -175,10 +175,10 @@ static int __init root_nfs_cat(char *dest, const char *src,
 	size_t len = strlen(dest);
 
 	if (len && dest[len - 1] != ',')
-		if (strlcat(dest, ",", destlen) > destlen)
+		if (strlcat(dest, ",", destlen) >= destlen)
 			return -1;
 
-	if (strlcat(dest, src, destlen) > destlen)
+	if (strlcat(dest, src, destlen) >= destlen)
 		return -1;
 	return 0;
 }
-- 
2.43.0

[PATCH 5.10 203/238] afs: Revert "afs: Hide silly-rename files from userspace"

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 0aec3847d044273733285dcff90afda89ad461d2 ]

This reverts commit 57e9d49c54528c49b8bffe6d99d782ea051ea534.

This undoes the hiding of .__afsXXXX silly-rename files.  The problem with
hiding them is that rm can't then manually delete them.

This also reverts commit 5f7a07646655fb4108da527565dcdc80124b14c4 ("afs: Fix
endless loop in directory parsing") as that's a bugfix for the above.

Fixes: 57e9d49c5452 ("afs: Hide silly-rename files from userspace")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Link: https://lists.infradead.org/pipermail/linux-afs/2024-February/008102.html
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/3085695.1710328121@warthog.procyon.org.uk
Reviewed-by: Jeffrey E Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/afs/dir.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/fs/afs/dir.c b/fs/afs/dir.c
index 88f0e719c6ac0..a59d6293a32b2 100644
--- a/fs/afs/dir.c
+++ b/fs/afs/dir.c
@@ -418,16 +418,6 @@ static int afs_dir_iterate_block(struct afs_vnode *dvnode,
 			continue;
 		}
 
-		/* Don't expose silly rename entries to userspace. */
-		if (nlen > 6 &&
-		    dire->u.name[0] == '.' &&
-		    ctx->actor != afs_lookup_filldir &&
-		    ctx->actor != afs_lookup_one_filldir &&
-		    memcmp(dire->u.name, ".__afs", 6) == 0) {
-			ctx->pos = blkoff + next * sizeof(union afs_xdr_dirent);
-			continue;
-		}
-
 		/* found the next entry */
 		if (!dir_emit(ctx, dire->u.name, nlen,
 			      ntohl(dire->u.vnode),
-- 
2.43.0

[PATCH 5.10 204/238] remoteproc: stm32: Constify st_rproc_ops

[Sasha Levin]

From: Rikard Falkeborn <rikard.falkeborn@gmail.com>

[ Upstream commit 0eee3d28ff6572f0e1afd41e863e44d396a308e2 ]

The only usage of st_rproc_ops is to pass its address to rproc_alloc()
which accepts a const pointer. Make it const to allow the compiler to
put it in read-only memory.

Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20201107233630.9728-3-rikard.falkeborn@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Stable-dep-of: 32381bbccba4 ("remoteproc: stm32: Fix incorrect type in assignment for va")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/remoteproc/stm32_rproc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c
index df784fec124f6..5f12553f0b6d7 100644
--- a/drivers/remoteproc/stm32_rproc.c
+++ b/drivers/remoteproc/stm32_rproc.c
@@ -553,7 +553,7 @@ static void stm32_rproc_kick(struct rproc *rproc, int vqid)
 	}
 }
 
-static struct rproc_ops st_rproc_ops = {
+static const struct rproc_ops st_rproc_ops = {
 	.start		= stm32_rproc_start,
 	.stop		= stm32_rproc_stop,
 	.attach		= stm32_rproc_attach,
-- 
2.43.0

[PATCH 5.10 205/238] remoteproc: Add new get_loaded_rsc_table() to rproc_ops

[Sasha Levin]

From: Mathieu Poirier <mathieu.poirier@linaro.org>

[ Upstream commit 1a631382be1d22ddab0582dae3498b3d28e2e44a ]

Add a new get_loaded_rsc_table() operation in order to support
scenarios where the remoteproc core has booted a remote processor
and detaches from it.  When re-attaching to the remote processor,
the core needs to know where the resource table has been placed
in memory.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-6-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Stable-dep-of: 32381bbccba4 ("remoteproc: stm32: Fix incorrect type in assignment for va")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/remoteproc/remoteproc_core.c     | 32 ++++++++++++++++++++++++
 drivers/remoteproc/remoteproc_internal.h | 10 ++++++++
 include/linux/remoteproc.h               |  6 ++++-
 3 files changed, 47 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index cc55ff0128cf2..a933e345683c4 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -1539,6 +1539,32 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 	return ret;
 }
 
+static int rproc_set_rsc_table(struct rproc *rproc)
+{
+	struct resource_table *table_ptr;
+	struct device *dev = &rproc->dev;
+	size_t table_sz;
+	int ret;
+
+	table_ptr = rproc_get_loaded_rsc_table(rproc, &table_sz);
+	if (!table_ptr) {
+		/* Not having a resource table is acceptable */
+		return 0;
+	}
+
+	if (IS_ERR(table_ptr)) {
+		ret = PTR_ERR(table_ptr);
+		dev_err(dev, "can't load resource table: %d\n", ret);
+		return ret;
+	}
+
+	rproc->cached_table = NULL;
+	rproc->table_ptr = table_ptr;
+	rproc->table_sz = table_sz;
+
+	return 0;
+}
+
 /*
  * Attach to remote processor - similar to rproc_fw_boot() but without
  * the steps that deal with the firmware image.
@@ -1558,6 +1584,12 @@ static int rproc_actuate(struct rproc *rproc)
 		return ret;
 	}
 
+	ret = rproc_set_rsc_table(rproc);
+	if (ret) {
+		dev_err(dev, "can't load resource table: %d\n", ret);
+		goto disable_iommu;
+	}
+
 	/* reset max_notifyid */
 	rproc->max_notifyid = -1;
 
diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
index c34002888d2c3..4f73aac7e60d1 100644
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@@ -177,6 +177,16 @@ struct resource_table *rproc_find_loaded_rsc_table(struct rproc *rproc,
 	return NULL;
 }
 
+static inline
+struct resource_table *rproc_get_loaded_rsc_table(struct rproc *rproc,
+						  size_t *size)
+{
+	if (rproc->ops->get_loaded_rsc_table)
+		return rproc->ops->get_loaded_rsc_table(rproc, size);
+
+	return NULL;
+}
+
 static inline
 bool rproc_u64_fit_in_size_t(u64 val)
 {
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 3fa3ba6498e87..2546758f13eb0 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -368,7 +368,9 @@ enum rsc_handling_status {
  * RSC_HANDLED if resource was handled, RSC_IGNORED if not handled and a
  * negative value on error
  * @load_rsc_table:	load resource table from firmware image
- * @find_loaded_rsc_table: find the loaded resouce table
+ * @find_loaded_rsc_table: find the loaded resource table from firmware image
+ * @get_loaded_rsc_table: get resource table installed in memory
+ *			  by external entity
  * @load:		load firmware to memory, where the remote processor
  *			expects to find it
  * @sanity_check:	sanity check the fw image
@@ -389,6 +391,8 @@ struct rproc_ops {
 			  int offset, int avail);
 	struct resource_table *(*find_loaded_rsc_table)(
 				struct rproc *rproc, const struct firmware *fw);
+	struct resource_table *(*get_loaded_rsc_table)(
+				struct rproc *rproc, size_t *size);
 	int (*load)(struct rproc *rproc, const struct firmware *fw);
 	int (*sanity_check)(struct rproc *rproc, const struct firmware *fw);
 	u64 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
-- 
2.43.0

[PATCH 5.10 206/238] remoteproc: stm32: Move resource table setup to rproc_ops

[Sasha Levin]

From: Mathieu Poirier <mathieu.poirier@linaro.org>

[ Upstream commit 8a471396d21ca499d89d4071b2b670258f009ffa ]

Move the setting of the resource table installed by an external
entity to rproc_ops::get_loaded_rsc_table().  This is to support
scenarios where a remote processor has been attached to but is
detached at a later stage.  To re-attach the remote processor,
the address of the resource table needs to be available
at a later time than the platform driver's probe() function.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-7-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Stable-dep-of: 32381bbccba4 ("remoteproc: stm32: Fix incorrect type in assignment for va")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/remoteproc/stm32_rproc.c | 141 +++++++++++++++----------------
 1 file changed, 68 insertions(+), 73 deletions(-)

diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c
index 5f12553f0b6d7..b410684c3aa90 100644
--- a/drivers/remoteproc/stm32_rproc.c
+++ b/drivers/remoteproc/stm32_rproc.c
@@ -553,6 +553,73 @@ static void stm32_rproc_kick(struct rproc *rproc, int vqid)
 	}
 }
 
+static int stm32_rproc_da_to_pa(struct rproc *rproc,
+				u64 da, phys_addr_t *pa)
+{
+	struct stm32_rproc *ddata = rproc->priv;
+	struct device *dev = rproc->dev.parent;
+	struct stm32_rproc_mem *p_mem;
+	unsigned int i;
+
+	for (i = 0; i < ddata->nb_rmems; i++) {
+		p_mem = &ddata->rmems[i];
+
+		if (da < p_mem->dev_addr ||
+		    da >= p_mem->dev_addr + p_mem->size)
+			continue;
+
+		*pa = da - p_mem->dev_addr + p_mem->bus_addr;
+		dev_dbg(dev, "da %llx to pa %#x\n", da, *pa);
+
+		return 0;
+	}
+
+	dev_err(dev, "can't translate da %llx\n", da);
+
+	return -EINVAL;
+}
+
+static struct resource_table *
+stm32_rproc_get_loaded_rsc_table(struct rproc *rproc, size_t *table_sz)
+{
+	struct stm32_rproc *ddata = rproc->priv;
+	struct device *dev = rproc->dev.parent;
+	phys_addr_t rsc_pa;
+	u32 rsc_da;
+	int err;
+
+	/* The resource table has already been mapped, nothing to do */
+	if (ddata->rsc_va)
+		goto done;
+
+	err = regmap_read(ddata->rsctbl.map, ddata->rsctbl.reg, &rsc_da);
+	if (err) {
+		dev_err(dev, "failed to read rsc tbl addr\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (!rsc_da)
+		/* no rsc table */
+		return ERR_PTR(-ENOENT);
+
+	err = stm32_rproc_da_to_pa(rproc, rsc_da, &rsc_pa);
+	if (err)
+		return ERR_PTR(err);
+
+	ddata->rsc_va = devm_ioremap_wc(dev, rsc_pa, RSC_TBL_SIZE);
+	if (IS_ERR_OR_NULL(ddata->rsc_va)) {
+		dev_err(dev, "Unable to map memory region: %pa+%zx\n",
+			&rsc_pa, RSC_TBL_SIZE);
+		ddata->rsc_va = NULL;
+		return ERR_PTR(-ENOMEM);
+	}
+
+done:
+	/* Assuming the resource table fits in 1kB is fair */
+	*table_sz = RSC_TBL_SIZE;
+	return (struct resource_table *)ddata->rsc_va;
+}
+
 static const struct rproc_ops st_rproc_ops = {
 	.start		= stm32_rproc_start,
 	.stop		= stm32_rproc_stop,
@@ -561,6 +628,7 @@ static const struct rproc_ops st_rproc_ops = {
 	.load		= rproc_elf_load_segments,
 	.parse_fw	= stm32_rproc_parse_fw,
 	.find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table,
+	.get_loaded_rsc_table = stm32_rproc_get_loaded_rsc_table,
 	.sanity_check	= rproc_elf_sanity_check,
 	.get_boot_addr	= rproc_elf_get_boot_addr,
 };
@@ -704,75 +772,6 @@ static int stm32_rproc_get_m4_status(struct stm32_rproc *ddata,
 	return regmap_read(ddata->m4_state.map, ddata->m4_state.reg, state);
 }
 
-static int stm32_rproc_da_to_pa(struct platform_device *pdev,
-				struct stm32_rproc *ddata,
-				u64 da, phys_addr_t *pa)
-{
-	struct device *dev = &pdev->dev;
-	struct stm32_rproc_mem *p_mem;
-	unsigned int i;
-
-	for (i = 0; i < ddata->nb_rmems; i++) {
-		p_mem = &ddata->rmems[i];
-
-		if (da < p_mem->dev_addr ||
-		    da >= p_mem->dev_addr + p_mem->size)
-			continue;
-
-		*pa = da - p_mem->dev_addr + p_mem->bus_addr;
-		dev_dbg(dev, "da %llx to pa %#x\n", da, *pa);
-
-		return 0;
-	}
-
-	dev_err(dev, "can't translate da %llx\n", da);
-
-	return -EINVAL;
-}
-
-static int stm32_rproc_get_loaded_rsc_table(struct platform_device *pdev,
-					    struct rproc *rproc,
-					    struct stm32_rproc *ddata)
-{
-	struct device *dev = &pdev->dev;
-	phys_addr_t rsc_pa;
-	u32 rsc_da;
-	int err;
-
-	err = regmap_read(ddata->rsctbl.map, ddata->rsctbl.reg, &rsc_da);
-	if (err) {
-		dev_err(dev, "failed to read rsc tbl addr\n");
-		return err;
-	}
-
-	if (!rsc_da)
-		/* no rsc table */
-		return 0;
-
-	err = stm32_rproc_da_to_pa(pdev, ddata, rsc_da, &rsc_pa);
-	if (err)
-		return err;
-
-	ddata->rsc_va = devm_ioremap_wc(dev, rsc_pa, RSC_TBL_SIZE);
-	if (IS_ERR_OR_NULL(ddata->rsc_va)) {
-		dev_err(dev, "Unable to map memory region: %pa+%zx\n",
-			&rsc_pa, RSC_TBL_SIZE);
-		ddata->rsc_va = NULL;
-		return -ENOMEM;
-	}
-
-	/*
-	 * The resource table is already loaded in device memory, no need
-	 * to work with a cached table.
-	 */
-	rproc->cached_table = NULL;
-	/* Assuming the resource table fits in 1kB is fair */
-	rproc->table_sz = RSC_TBL_SIZE;
-	rproc->table_ptr = (struct resource_table *)ddata->rsc_va;
-
-	return 0;
-}
-
 static int stm32_rproc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -812,10 +811,6 @@ static int stm32_rproc_probe(struct platform_device *pdev)
 		ret = stm32_rproc_parse_memory_regions(rproc);
 		if (ret)
 			goto free_resources;
-
-		ret = stm32_rproc_get_loaded_rsc_table(pdev, rproc, ddata);
-		if (ret)
-			goto free_resources;
 	}
 
 	rproc->has_iommu = false;
-- 
2.43.0

[PATCH 5.10 207/238] remoteproc: stm32: use correct format strings on 64-bit

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 03bd158e1535e68bcd2b1e095b0ebcad7c84bd20 ]

With CONFIG_ARCH_STM32 making it into arch/arm64, a couple of format
strings no longer work, since they rely on size_t being compatible
with %x, or they print an 'int' using %z:

drivers/remoteproc/stm32_rproc.c: In function 'stm32_rproc_mem_alloc':
drivers/remoteproc/stm32_rproc.c:122:22: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'size_t' {aka 'long unsigned int'} [-Werror=format=]
drivers/remoteproc/stm32_rproc.c:122:40: note: format string is defined here
  122 |         dev_dbg(dev, "map memory: %pa+%x\n", &mem->dma, mem->len);
      |                                       ~^
      |                                        |
      |                                        unsigned int
      |                                       %lx
drivers/remoteproc/stm32_rproc.c:125:30: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Werror=format=]
drivers/remoteproc/stm32_rproc.c:125:65: note: format string is defined here
  125 |                 dev_err(dev, "Unable to map memory region: %pa+%x\n",
      |                                                                ~^
      |                                                                 |
      |                                                                 unsigned int
      |                                                                %lx
drivers/remoteproc/stm32_rproc.c: In function 'stm32_rproc_get_loaded_rsc_table':
drivers/remoteproc/stm32_rproc.c:646:30: error: format '%zx' expects argument of type 'size_t', but argument 4 has type 'int' [-Werror=format=]
drivers/remoteproc/stm32_rproc.c:646:66: note: format string is defined here
  646 |                 dev_err(dev, "Unable to map memory region: %pa+%zx\n",
      |                                                                ~~^
      |                                                                  |
      |                                                                  long unsigned int
      |                                                                %x

Fix up all three instances to work across architectures, and enable
compile testing for this driver to ensure it builds everywhere.

Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Stable-dep-of: 32381bbccba4 ("remoteproc: stm32: Fix incorrect type in assignment for va")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/remoteproc/Kconfig       | 2 +-
 drivers/remoteproc/stm32_rproc.c | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index d99548fb5ddef..6dbf6ed10ea49 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -249,7 +249,7 @@ config ST_SLIM_REMOTEPROC
 
 config STM32_RPROC
 	tristate "STM32 remoteproc support"
-	depends on ARCH_STM32
+	depends on ARCH_STM32 || COMPILE_TEST
 	depends on REMOTEPROC
 	select MAILBOX
 	help
diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c
index b410684c3aa90..8f7fb1baed10d 100644
--- a/drivers/remoteproc/stm32_rproc.c
+++ b/drivers/remoteproc/stm32_rproc.c
@@ -117,10 +117,10 @@ static int stm32_rproc_mem_alloc(struct rproc *rproc,
 	struct device *dev = rproc->dev.parent;
 	void *va;
 
-	dev_dbg(dev, "map memory: %pa+%x\n", &mem->dma, mem->len);
+	dev_dbg(dev, "map memory: %pad+%zx\n", &mem->dma, mem->len);
 	va = ioremap_wc(mem->dma, mem->len);
 	if (IS_ERR_OR_NULL(va)) {
-		dev_err(dev, "Unable to map memory region: %pa+%x\n",
+		dev_err(dev, "Unable to map memory region: %pad+0x%zx\n",
 			&mem->dma, mem->len);
 		return -ENOMEM;
 	}
@@ -608,7 +608,7 @@ stm32_rproc_get_loaded_rsc_table(struct rproc *rproc, size_t *table_sz)
 
 	ddata->rsc_va = devm_ioremap_wc(dev, rsc_pa, RSC_TBL_SIZE);
 	if (IS_ERR_OR_NULL(ddata->rsc_va)) {
-		dev_err(dev, "Unable to map memory region: %pa+%zx\n",
+		dev_err(dev, "Unable to map memory region: %pa+%x\n",
 			&rsc_pa, RSC_TBL_SIZE);
 		ddata->rsc_va = NULL;
 		return ERR_PTR(-ENOMEM);
-- 
2.43.0

[PATCH 5.10 208/238] remoteproc: stm32: Fix incorrect type in assignment for va

[Sasha Levin]

From: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>

[ Upstream commit 32381bbccba4c21145c571701f8f7fb1d9b3a92e ]

The sparse tool complains about the attribute conversion between
a _iomem void * and a void *:

stm32_rproc.c:122:12: sparse: sparse: incorrect type in assignment (different address spaces) @@     expected void *va @@     got void [noderef] __iomem * @@
stm32_rproc.c:122:12: sparse:     expected void *va
stm32_rproc.c:122:12: sparse:     got void [noderef] __iomem *

Add '__force' to explicitly specify that the cast is intentional.
This conversion is necessary to cast to virtual addresses pointer,used,
by the remoteproc core.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312150052.HCiNKlqB-lkp@intel.com/
Fixes: 13140de09cc2 ("remoteproc: stm32: add an ST stm32_rproc driver")
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20240117135312.3381936-2-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/remoteproc/stm32_rproc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c
index 8f7fb1baed10d..d11949ae3ba0d 100644
--- a/drivers/remoteproc/stm32_rproc.c
+++ b/drivers/remoteproc/stm32_rproc.c
@@ -118,7 +118,7 @@ static int stm32_rproc_mem_alloc(struct rproc *rproc,
 	void *va;
 
 	dev_dbg(dev, "map memory: %pad+%zx\n", &mem->dma, mem->len);
-	va = ioremap_wc(mem->dma, mem->len);
+	va = (__force void *)ioremap_wc(mem->dma, mem->len);
 	if (IS_ERR_OR_NULL(va)) {
 		dev_err(dev, "Unable to map memory region: %pad+0x%zx\n",
 			&mem->dma, mem->len);
@@ -135,7 +135,7 @@ static int stm32_rproc_mem_release(struct rproc *rproc,
 				   struct rproc_mem_entry *mem)
 {
 	dev_dbg(rproc->dev.parent, "unmap memory: %pa\n", &mem->dma);
-	iounmap(mem->va);
+	iounmap((__force __iomem void *)mem->va);
 
 	return 0;
 }
-- 
2.43.0

[PATCH 5.10 209/238] remoteproc: stm32: Fix incorrect type assignment returned by stm32_rproc_get_loaded_rsc_tablef

[Sasha Levin]

From: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>

[ Upstream commit c77b35ce66af25bdd6fde60b62e35b9b316ea5c2 ]

The sparse tool complains about the remove of the _iomem attribute.

stm32_rproc.c:660:17: warning: cast removes address space '__iomem' of expression

Add '__force' to explicitly specify that the cast is intentional.
This conversion is necessary to cast to addresses pointer,
which are then managed by the remoteproc core as a pointer to a
resource_table structure.

Fixes: 8a471396d21c ("remoteproc: stm32: Move resource table setup to rproc_ops")
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20240117135312.3381936-3-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/remoteproc/stm32_rproc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c
index d11949ae3ba0d..6e529ea05d3a8 100644
--- a/drivers/remoteproc/stm32_rproc.c
+++ b/drivers/remoteproc/stm32_rproc.c
@@ -617,7 +617,7 @@ stm32_rproc_get_loaded_rsc_table(struct rproc *rproc, size_t *table_sz)
 done:
 	/* Assuming the resource table fits in 1kB is fair */
 	*table_sz = RSC_TBL_SIZE;
-	return (struct resource_table *)ddata->rsc_va;
+	return (__force struct resource_table *)ddata->rsc_va;
 }
 
 static const struct rproc_ops st_rproc_ops = {
-- 
2.43.0

[PATCH 5.10 210/238] tty: vt: fix 20 vs 0x20 typo in EScsiignore

[Sasha Levin]

From: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>

[ Upstream commit 0e6a92f67c8a94707f7bb27ac29e2bdf3e7c167d ]

The if (c >= 20 && c <= 0x3f) test added in commit 7a99565f8732 is
wrong.  20 is DC4 in ascii and it makes no sense to consider that as the
bottom limit. Instead, it should be 0x20 as in the other test in
the commit above. This is supposed to NOT change anything as we handle
interesting 20-0x20 asciis far before this if.

So for sakeness, change to 0x20 (which is SPACE).

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Fixes: 7a99565f8732 ("vt: ignore csi sequences with intermediate characters.")
Cc: Martin Hostettler <textshell@uchuujin.de>
Link: https://lore.kernel.org/all/ZaP45QY2WEsDqoxg@neutronstar.dyndns.org/
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/vt/vt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 0252c0562dbc8..df645d127e401 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -2516,7 +2516,7 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
 		}
 		return;
 	case EScsiignore:
-		if (c >= 20 && c <= 0x3f)
+		if (c >= 0x20 && c <= 0x3f)
 			return;
 		vc->vc_state = ESnormal;
 		return;
-- 
2.43.0

[PATCH 5.10 211/238] serial: max310x: fix syntax error in IRQ error message

[Sasha Levin]

From: Hugo Villeneuve <hvilleneuve@dimonoff.com>

[ Upstream commit 8ede8c6f474255b2213cccd7997b993272a8e2f9 ]

Replace g with q.

Helpful when grepping thru source code or logs for
"request" keyword.

Fixes: f65444187a66 ("serial: New serial driver MAX310X")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240118152213.2644269-6-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/max310x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 2f88eae8a55a1..5570fd3b84e15 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1460,7 +1460,7 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
 	if (!ret)
 		return 0;
 
-	dev_err(dev, "Unable to reguest IRQ %i\n", irq);
+	dev_err(dev, "Unable to request IRQ %i\n", irq);
 
 out_uart:
 	for (i = 0; i < devtype->nr; i++) {
-- 
2.43.0

[PATCH 5.10 212/238] tty: serial: samsung: fix tx_empty() to return TIOCSER_TEMT

[Sasha Levin]

From: Tudor Ambarus <tudor.ambarus@linaro.org>

[ Upstream commit 314c2b399288f0058a8c5b6683292cbde5f1531b ]

The core expects for tx_empty() either TIOCSER_TEMT when the tx is
empty or 0 otherwise. s3c24xx_serial_txempty_nofifo() might return
0x4, and at least uart_get_lsr_info() tries to clear exactly
TIOCSER_TEMT (BIT(1)). Fix tx_empty() to return TIOCSER_TEMT.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240119104526.1221243-2-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/samsung_tty.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index fa5b1321d9b15..5388eb7fa0f47 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -922,11 +922,10 @@ static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
 		if ((ufstat & info->tx_fifomask) != 0 ||
 		    (ufstat & info->tx_fifofull))
 			return 0;
-
-		return 1;
+		return TIOCSER_TEMT;
 	}
 
-	return s3c24xx_serial_txempty_nofifo(port);
+	return s3c24xx_serial_txempty_nofifo(port) ? TIOCSER_TEMT : 0;
 }
 
 /* no modem control lines */
-- 
2.43.0

[PATCH 5.10 213/238] kconfig: fix infinite loop when expanding a macro at the end of file

[Sasha Levin]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit af8bbce92044dc58e4cc039ab94ee5d470a621f5 ]

A macro placed at the end of a file with no newline causes an infinite
loop.

[Test Kconfig]
  $(info,hello)
  \ No newline at end of file

I realized that flex-provided input() returns 0 instead of EOF when it
reaches the end of a file.

Fixes: 104daea149c4 ("kconfig: reference environment variables directly and remove 'option env='")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/kconfig/lexer.l | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/scripts/kconfig/lexer.l b/scripts/kconfig/lexer.l
index 240109f965aeb..72e5e9ac52bb4 100644
--- a/scripts/kconfig/lexer.l
+++ b/scripts/kconfig/lexer.l
@@ -305,8 +305,11 @@ static char *expand_token(const char *in, size_t n)
 	new_string();
 	append_string(in, n);
 
-	/* get the whole line because we do not know the end of token. */
-	while ((c = input()) != EOF) {
+	/*
+	 * get the whole line because we do not know the end of token.
+	 * input() returns 0 (not EOF!) when it reachs the end of file.
+	 */
+	while ((c = input()) != 0) {
 		if (c == '\n') {
 			unput(c);
 			break;
-- 
2.43.0

[PATCH 5.10 214/238] rtc: mt6397: select IRQ_DOMAIN instead of depending on it

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 544c42f798e1651dcb04fb0395219bf0f1c2607e ]

IRQ_DOMAIN is a hidden (not user visible) symbol. Users cannot set
it directly thru "make *config", so drivers should select it instead
of depending on it if they need it.
Relying on it being set for a dependency is risky.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on" for IRQ_DOMAIN to
"select" for RTC_DRV_MT6397.

Fixes: 04d3ba70a3c9 ("rtc: mt6397: add IRQ domain dependency")
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Eddie Huang <eddie.huang@mediatek.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-rtc@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Peter Rosin <peda@axentia.se>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240213050258.6167-1-rdunlap@infradead.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 54cf5ec8f4019..8ddd334e049e1 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1833,7 +1833,8 @@ config RTC_DRV_MT2712
 
 config RTC_DRV_MT6397
 	tristate "MediaTek PMIC based RTC"
-	depends on MFD_MT6397 || (COMPILE_TEST && IRQ_DOMAIN)
+	depends on MFD_MT6397 || COMPILE_TEST
+	select IRQ_DOMAIN
 	help
 	  This selects the MediaTek(R) RTC driver. RTC is part of MediaTek
 	  MT6397 PMIC. You should enable MT6397 PMIC MFD before select
-- 
2.43.0

[PATCH 5.10 214/238] rtc: mt6397: select IRQ_DOMAIN instead of depending on it

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 544c42f798e1651dcb04fb0395219bf0f1c2607e ]

IRQ_DOMAIN is a hidden (not user visible) symbol. Users cannot set
it directly thru "make *config", so drivers should select it instead
of depending on it if they need it.
Relying on it being set for a dependency is risky.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on" for IRQ_DOMAIN to
"select" for RTC_DRV_MT6397.

Fixes: 04d3ba70a3c9 ("rtc: mt6397: add IRQ domain dependency")
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Eddie Huang <eddie.huang@mediatek.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-rtc@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Peter Rosin <peda@axentia.se>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240213050258.6167-1-rdunlap@infradead.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 54cf5ec8f4019..8ddd334e049e1 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1833,7 +1833,8 @@ config RTC_DRV_MT2712
 
 config RTC_DRV_MT6397
 	tristate "MediaTek PMIC based RTC"
-	depends on MFD_MT6397 || (COMPILE_TEST && IRQ_DOMAIN)
+	depends on MFD_MT6397 || COMPILE_TEST
+	select IRQ_DOMAIN
 	help
 	  This selects the MediaTek(R) RTC driver. RTC is part of MediaTek
 	  MT6397 PMIC. You should enable MT6397 PMIC MFD before select
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 5.10 215/238] serial: 8250_exar: Don't remove GPIO device on suspend

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 73b5a5c00be39e23b194bad10e1ea8bb73eee176 ]

It seems a copy&paste mistake that suspend callback removes the GPIO
device. There is no counterpart of this action, means once suspended
there is no more GPIO device available untile full unbind-bind cycle
is performed. Remove suspicious GPIO device removal in suspend.

Fixes: d0aeaa83f0b0 ("serial: exar: split out the exar code from 8250_pci")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240219150627.2101198-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/8250/8250_exar.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 6e33c74e569f0..7c28d2752a4cd 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -688,6 +688,7 @@ static void exar_pci_remove(struct pci_dev *pcidev)
 	for (i = 0; i < priv->nr; i++)
 		serial8250_unregister_port(priv->line[i]);
 
+	/* Ensure that every init quirk is properly torn down */
 	if (priv->board->exit)
 		priv->board->exit(pcidev);
 }
@@ -702,10 +703,6 @@ static int __maybe_unused exar_suspend(struct device *dev)
 		if (priv->line[i] >= 0)
 			serial8250_suspend_port(priv->line[i]);
 
-	/* Ensure that every init quirk is properly torn down */
-	if (priv->board->exit)
-		priv->board->exit(pcidev);
-
 	return 0;
 }
 
-- 
2.43.0

[PATCH 5.10 216/238] staging: greybus: fix get_channel_from_mode() failure path

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@linaro.org>

[ Upstream commit 34164202a5827f60a203ca9acaf2d9f7d432aac8 ]

The get_channel_from_mode() function is supposed to return the channel
which matches the mode.  But it has a bug where if it doesn't find a
matching channel then it returns the last channel.  It should return
NULL instead.

Also remove an unnecessary NULL check on "channel".

Fixes: 2870b52bae4c ("greybus: lights: add lights implementation")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/379c0cb4-39e0-4293-8a18-c7b1298e5420@moroto.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/greybus/light.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/greybus/light.c b/drivers/staging/greybus/light.c
index d2672b65c3f49..e59bb27236b9f 100644
--- a/drivers/staging/greybus/light.c
+++ b/drivers/staging/greybus/light.c
@@ -100,15 +100,15 @@ static struct led_classdev *get_channel_cdev(struct gb_channel *channel)
 static struct gb_channel *get_channel_from_mode(struct gb_light *light,
 						u32 mode)
 {
-	struct gb_channel *channel = NULL;
+	struct gb_channel *channel;
 	int i;
 
 	for (i = 0; i < light->channels_count; i++) {
 		channel = &light->channels[i];
-		if (channel && channel->mode == mode)
-			break;
+		if (channel->mode == mode)
+			return channel;
 	}
-	return channel;
+	return NULL;
 }
 
 static int __gb_lights_flash_intensity_set(struct gb_channel *channel,
-- 
2.43.0

[PATCH 5.10 217/238] usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin

[Sasha Levin]

From: Colin Ian King <colin.i.king@gmail.com>

[ Upstream commit 600556809f04eb3bbccd05218215dcd7b285a9a9 ]

Currently the variable irqflags is being set but is not being used,
it appears it should be used in the call to net2272_probe_fin
rather than IRQF_TRIGGER_LOW being used. Kudos to Uwe Kleine-König
for suggesting the fix.

Cleans up clang scan build warning:
drivers/usb/gadget/udc/net2272.c:2610:15: warning: variable 'irqflags'
set but not used [-Wunused-but-set-variable]

Fixes: ceb80363b2ec ("USB: net2272: driver for PLX NET2272 USB device controller")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20240307181734.2034407-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/net2272.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c
index 23a735641c3df..8c56efe6abc49 100644
--- a/drivers/usb/gadget/udc/net2272.c
+++ b/drivers/usb/gadget/udc/net2272.c
@@ -2636,7 +2636,7 @@ net2272_plat_probe(struct platform_device *pdev)
 		goto err_req;
 	}
 
-	ret = net2272_probe_fin(dev, IRQF_TRIGGER_LOW);
+	ret = net2272_probe_fin(dev, irqflags);
 	if (ret)
 		goto err_io;
 
-- 
2.43.0

[PATCH 5.10 218/238] io_uring: don't save/restore iowait state

[Sasha Levin]

From: Jens Axboe <axboe@kernel.dk>

[ Upstream commit 6f0974eccbf78baead1735722c4f1ee3eb9422cd ]

This kind of state is per-syscall, and since we're doing the waiting off
entering the io_uring_enter(2) syscall, there's no way that iowait can
already be set for this case. Simplify it by setting it if we need to,
and always clearing it to 0 when done.

Fixes: 7b72d661f1f2 ("io_uring: gate iowait schedule on having pending requests")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 io_uring/io_uring.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c
index 67a355f27ad80..fc60396c90396 100644
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -7640,7 +7640,7 @@ static inline int io_cqring_wait_schedule(struct io_ring_ctx *ctx,
 					  struct io_wait_queue *iowq,
 					  ktime_t *timeout)
 {
-	int io_wait, ret;
+	int ret;
 
 	/* make sure we run task_work before checking for signals */
 	ret = io_run_task_work_sig();
@@ -7655,13 +7655,12 @@ static inline int io_cqring_wait_schedule(struct io_ring_ctx *ctx,
 	 * can take into account that the task is waiting for IO - turns out
 	 * to be important for low QD IO.
 	 */
-	io_wait = current->in_iowait;
 	if (current_pending_io())
 		current->in_iowait = 1;
 	ret = 1;
 	if (!schedule_hrtimeout(timeout, HRTIMER_MODE_ABS))
 		ret = -ETIME;
-	current->in_iowait = io_wait;
+	current->in_iowait = 0;
 	return ret;
 }
 
-- 
2.43.0

[PATCH 5.10 219/238] octeontx2-af: Use matching wake_up API variant in CGX command interface

[Sasha Levin]

From: Linu Cherian <lcherian@marvell.com>

[ Upstream commit e642921dfeed1e15e73f78f2c3b6746f72b6deb2 ]

Use wake_up API instead of wake_up_interruptible, since
wait_event_timeout API is used for waiting on command completion.

Fixes: 1463f382f58d ("octeontx2-af: Add support for CGX link management")
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/octeontx2/af/cgx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
index c0a0a31272cc2..55dfe1a20bc99 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
@@ -714,7 +714,7 @@ static irqreturn_t cgx_fwi_event_handler(int irq, void *data)
 
 		/* Release thread waiting for completion  */
 		lmac->cmd_pend = false;
-		wake_up_interruptible(&lmac->wq_cmd_cmplt);
+		wake_up(&lmac->wq_cmd_cmplt);
 		break;
 	case CGX_EVT_ASYNC:
 		if (cgx_event_is_linkevent(event))
-- 
2.43.0

[PATCH 5.10 220/238] s390/vtime: fix average steal time calculation

[Sasha Levin]

From: Mete Durlu <meted@linux.ibm.com>

[ Upstream commit 367c50f78451d3bd7ad70bc5c89f9ba6dec46ca9 ]

Current average steal timer calculation produces volatile and inflated
values. The only user of this value is KVM so far and it uses that to
decide whether or not to yield the vCPU which is seeing steal time.
KVM compares average steal timer to a threshold and if the threshold
is past then it does not allow CPU polling and yields it to host, else
it keeps the CPU by polling.
Since KVM's steal time threshold is very low by default (%10) it most
likely is not effected much by the bloated average steal timer values
because the operating region is pretty small. However there might be
new users in the future who might rely on this number. Fix average
steal timer calculation by changing the formula from:

	avg_steal_timer = avg_steal_timer / 2 + steal_timer;

to the following:

	avg_steal_timer = (avg_steal_timer + steal_timer) / 2;

This ensures that avg_steal_timer is actually a naive average of steal
timer values. It now closely follows steal timer values but of course
in a smoother manner.

Fixes: 152e9b8676c6 ("s390/vtime: steal time exponential moving average")
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/vtime.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index 579ec3a8c816f..bd65ff88c5baa 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -214,13 +214,13 @@ void vtime_flush(struct task_struct *tsk)
 		virt_timer_expire();
 
 	steal = S390_lowcore.steal_timer;
-	avg_steal = S390_lowcore.avg_steal_timer / 2;
+	avg_steal = S390_lowcore.avg_steal_timer;
 	if ((s64) steal > 0) {
 		S390_lowcore.steal_timer = 0;
 		account_steal_time(cputime_to_nsecs(steal));
 		avg_steal += steal;
 	}
-	S390_lowcore.avg_steal_timer = avg_steal;
+	S390_lowcore.avg_steal_timer = avg_steal / 2;
 }
 
 /*
-- 
2.43.0

[PATCH 5.10 221/238] soc: fsl: dpio: fix kcalloc() argument order

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 72ebb41b88f9d7c10c5e159e0507074af0a22fe2 ]

A previous bugfix added a call to kcalloc(), which starting in gcc-14
causes a harmless warning about the argument order:

drivers/soc/fsl/dpio/dpio-service.c: In function 'dpaa2_io_service_enqueue_multiple_desc_fq':
drivers/soc/fsl/dpio/dpio-service.c:526:29: error: 'kcalloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Werror=calloc-transposed-args]
  526 |         ed = kcalloc(sizeof(struct qbman_eq_desc), 32, GFP_KERNEL);
      |                             ^~~~~~
drivers/soc/fsl/dpio/dpio-service.c:526:29: note: earlier argument should specify number of elements, later size of each element

Since the two are only multiplied, the order does not change the
behavior, so just fix it now to shut up the compiler warning.

Dmity independently came up with the same fix.

Fixes: 5c4a5999b245 ("soc: fsl: dpio: avoid stack usage warning")
Reported-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/fsl/dpio/dpio-service.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/fsl/dpio/dpio-service.c b/drivers/soc/fsl/dpio/dpio-service.c
index 779c319a4b820..6cdd2c517ba68 100644
--- a/drivers/soc/fsl/dpio/dpio-service.c
+++ b/drivers/soc/fsl/dpio/dpio-service.c
@@ -485,7 +485,7 @@ int dpaa2_io_service_enqueue_multiple_desc_fq(struct dpaa2_io *d,
 	struct qbman_eq_desc *ed;
 	int i, ret;
 
-	ed = kcalloc(sizeof(struct qbman_eq_desc), 32, GFP_KERNEL);
+	ed = kcalloc(32, sizeof(struct qbman_eq_desc), GFP_KERNEL);
 	if (!ed)
 		return -ENOMEM;
 
-- 
2.43.0

[PATCH 5.10 222/238] hsr: Fix uninit-value access in hsr_get_node()

[Sasha Levin]

From: Shigeru Yoshida <syoshida@redhat.com>

[ Upstream commit ddbec99f58571301679addbc022256970ca3eac6 ]

KMSAN reported the following uninit-value access issue [1]:

=====================================================
BUG: KMSAN: uninit-value in hsr_get_node+0xa2e/0xa40 net/hsr/hsr_framereg.c:246
 hsr_get_node+0xa2e/0xa40 net/hsr/hsr_framereg.c:246
 fill_frame_info net/hsr/hsr_forward.c:577 [inline]
 hsr_forward_skb+0xe12/0x30e0 net/hsr/hsr_forward.c:615
 hsr_dev_xmit+0x1a1/0x270 net/hsr/hsr_device.c:223
 __netdev_start_xmit include/linux/netdevice.h:4940 [inline]
 netdev_start_xmit include/linux/netdevice.h:4954 [inline]
 xmit_one net/core/dev.c:3548 [inline]
 dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564
 __dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349
 dev_queue_xmit include/linux/netdevice.h:3134 [inline]
 packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
 packet_snd net/packet/af_packet.c:3087 [inline]
 packet_sendmsg+0x8b1d/0x9f30 net/packet/af_packet.c:3119
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 __sys_sendto+0x735/0xa10 net/socket.c:2191
 __do_sys_sendto net/socket.c:2203 [inline]
 __se_sys_sendto net/socket.c:2199 [inline]
 __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
 slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
 slab_alloc_node mm/slub.c:3478 [inline]
 kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523
 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560
 __alloc_skb+0x318/0x740 net/core/skbuff.c:651
 alloc_skb include/linux/skbuff.h:1286 [inline]
 alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334
 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2787
 packet_alloc_skb net/packet/af_packet.c:2936 [inline]
 packet_snd net/packet/af_packet.c:3030 [inline]
 packet_sendmsg+0x70e8/0x9f30 net/packet/af_packet.c:3119
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 __sys_sendto+0x735/0xa10 net/socket.c:2191
 __do_sys_sendto net/socket.c:2203 [inline]
 __se_sys_sendto net/socket.c:2199 [inline]
 __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

CPU: 1 PID: 5033 Comm: syz-executor334 Not tainted 6.7.0-syzkaller-00562-g9f8413c4a66f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
=====================================================

If the packet type ID field in the Ethernet header is either ETH_P_PRP or
ETH_P_HSR, but it is not followed by an HSR tag, hsr_get_skb_sequence_nr()
reads an invalid value as a sequence number. This causes the above issue.

This patch fixes the issue by returning NULL if the Ethernet header is not
followed by an HSR tag.

Fixes: f266a683a480 ("net/hsr: Better frame dispatch")
Reported-and-tested-by: syzbot+2ef3a8ce8e91b5a50098@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2ef3a8ce8e91b5a50098 [1]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20240312152719.724530-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/hsr/hsr_framereg.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/hsr/hsr_framereg.c b/net/hsr/hsr_framereg.c
index 87fc86aade5c9..fc9fb3e5ae3e2 100644
--- a/net/hsr/hsr_framereg.c
+++ b/net/hsr/hsr_framereg.c
@@ -237,6 +237,10 @@ struct hsr_node *hsr_get_node(struct hsr_port *port, struct list_head *node_db,
 	 */
 	if (ethhdr->h_proto == htons(ETH_P_PRP) ||
 	    ethhdr->h_proto == htons(ETH_P_HSR)) {
+		/* Check if skb contains hsr_ethhdr */
+		if (skb->mac_len < sizeof(struct hsr_ethhdr))
+			return NULL;
+
 		/* Use the existing sequence_nr from the tag as starting point
 		 * for filtering duplicate frames.
 		 */
-- 
2.43.0

[PATCH 5.10 223/238] packet: annotate data-races around ignore_outgoing

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 6ebfad33161afacb3e1e59ed1c2feefef70f9f97 ]

ignore_outgoing is read locklessly from dev_queue_xmit_nit()
and packet_getsockopt()

Add appropriate READ_ONCE()/WRITE_ONCE() annotations.

syzbot reported:

BUG: KCSAN: data-race in dev_queue_xmit_nit / packet_setsockopt

write to 0xffff888107804542 of 1 bytes by task 22618 on cpu 0:
 packet_setsockopt+0xd83/0xfd0 net/packet/af_packet.c:4003
 do_sock_setsockopt net/socket.c:2311 [inline]
 __sys_setsockopt+0x1d8/0x250 net/socket.c:2334
 __do_sys_setsockopt net/socket.c:2343 [inline]
 __se_sys_setsockopt net/socket.c:2340 [inline]
 __x64_sys_setsockopt+0x66/0x80 net/socket.c:2340
 do_syscall_64+0xd3/0x1d0
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

read to 0xffff888107804542 of 1 bytes by task 27 on cpu 1:
 dev_queue_xmit_nit+0x82/0x620 net/core/dev.c:2248
 xmit_one net/core/dev.c:3527 [inline]
 dev_hard_start_xmit+0xcc/0x3f0 net/core/dev.c:3547
 __dev_queue_xmit+0xf24/0x1dd0 net/core/dev.c:4335
 dev_queue_xmit include/linux/netdevice.h:3091 [inline]
 batadv_send_skb_packet+0x264/0x300 net/batman-adv/send.c:108
 batadv_send_broadcast_skb+0x24/0x30 net/batman-adv/send.c:127
 batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:392 [inline]
 batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:420 [inline]
 batadv_iv_send_outstanding_bat_ogm_packet+0x3f0/0x4b0 net/batman-adv/bat_iv_ogm.c:1700
 process_one_work kernel/workqueue.c:3254 [inline]
 process_scheduled_works+0x465/0x990 kernel/workqueue.c:3335
 worker_thread+0x526/0x730 kernel/workqueue.c:3416
 kthread+0x1d1/0x210 kernel/kthread.c:388
 ret_from_fork+0x4b/0x60 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243

value changed: 0x00 -> 0x01

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 27 Comm: kworker/u8:1 Tainted: G        W          6.8.0-syzkaller-08073-g480e035fc4c7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet

Fixes: fa788d986a3a ("packet: add sockopt to ignore outgoing packets")
Reported-by: syzbot+c669c1136495a2e7c31f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/CANn89i+Z7MfbkBLOv=p7KZ7=K1rKHO4P1OL5LYDCtBiyqsa9oQ@mail.gmail.com/T/#t
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/dev.c         | 2 +-
 net/packet/af_packet.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index 0619d2253aa24..0e2c433bebcd4 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2324,7 +2324,7 @@ void dev_queue_xmit_nit(struct sk_buff *skb, struct net_device *dev)
 	rcu_read_lock();
 again:
 	list_for_each_entry_rcu(ptype, ptype_list, list) {
-		if (ptype->ignore_outgoing)
+		if (READ_ONCE(ptype->ignore_outgoing))
 			continue;
 
 		/* Never send packets back to the socket
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 6cc054dd53b6e..db5d16c5d5b11 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -3951,7 +3951,7 @@ packet_setsockopt(struct socket *sock, int level, int optname, sockptr_t optval,
 		if (val < 0 || val > 1)
 			return -EINVAL;
 
-		po->prot_hook.ignore_outgoing = !!val;
+		WRITE_ONCE(po->prot_hook.ignore_outgoing, !!val);
 		return 0;
 	}
 	case PACKET_TX_HAS_OFF:
@@ -4083,7 +4083,7 @@ static int packet_getsockopt(struct socket *sock, int level, int optname,
 		       0);
 		break;
 	case PACKET_IGNORE_OUTGOING:
-		val = po->prot_hook.ignore_outgoing;
+		val = READ_ONCE(po->prot_hook.ignore_outgoing);
 		break;
 	case PACKET_ROLLOVER_STATS:
 		if (!po->rollover)
-- 
2.43.0

[PATCH 5.10 224/238] net: dsa: mt7530: prevent possible incorrect XTAL frequency selection

[Sasha Levin]

From: Arınç ÜNAL <arinc.unal@arinc9.com>

[ Upstream commit f490c492e946d8ffbe65ad4efc66de3c5ede30a4 ]

On MT7530, the HT_XTAL_FSEL field of the HWTRAP register stores a 2-bit
value that represents the frequency of the crystal oscillator connected to
the switch IC. The field is populated by the state of the ESW_P4_LED_0 and
ESW_P4_LED_0 pins, which is done right after reset is deasserted.

  ESW_P4_LED_0    ESW_P3_LED_0    Frequency
  -----------------------------------------
  0               0               Reserved
  0               1               20MHz
  1               0               40MHz
  1               1               25MHz

On MT7531, the XTAL25 bit of the STRAP register stores this. The LAN0LED0
pin is used to populate the bit. 25MHz when the pin is high, 40MHz when
it's low.

These pins are also used with LEDs, therefore, their state can be set to
something other than the bootstrapping configuration. For example, a link
may be established on port 3 before the DSA subdriver takes control of the
switch which would set ESW_P3_LED_0 to high.

Currently on mt7530_setup() and mt7531_setup(), 1000 - 1100 usec delay is
described between reset assertion and deassertion. Some switch ICs in real
life conditions cannot always have these pins set back to the bootstrapping
configuration before reset deassertion in this amount of delay. This causes
wrong crystal frequency to be selected which puts the switch in a
nonfunctional state after reset deassertion.

The tests below are conducted on an MT7530 with a 40MHz crystal oscillator
by Justin Swartz.

With a cable from an active peer connected to port 3 before reset, an
incorrect crystal frequency (0b11 = 25MHz) is selected:

                      [1]                  [3]     [5]
                      :                    :       :
              _____________________________         __________________
ESW_P4_LED_0                               |_______|
              _____________________________
ESW_P3_LED_0                               |__________________________

                       :                  : :     :
                       :                  : [4]...:
                       :                  :
                       [2]................:

[1] Reset is asserted.
[2] Period of 1000 - 1100 usec.
[3] Reset is deasserted.
[4] Period of 315 usec. HWTRAP register is populated with incorrect
    XTAL frequency.
[5] Signals reflect the bootstrapped configuration.

Increase the delay between reset_control_assert() and
reset_control_deassert(), and gpiod_set_value_cansleep(priv->reset, 0) and
gpiod_set_value_cansleep(priv->reset, 1) to 5000 - 5100 usec. This amount
ensures a higher possibility that the switch IC will have these pins back
to the bootstrapping configuration before reset deassertion.

With a cable from an active peer connected to port 3 before reset, the
correct crystal frequency (0b10 = 40MHz) is selected:

                      [1]        [2-1]     [3]     [5]
                      :          :         :       :
              _____________________________         __________________
ESW_P4_LED_0                               |_______|
              ___________________           _______
ESW_P3_LED_0                     |_________|       |__________________

                       :          :       : :     :
                       :          [2-2]...: [4]...:
                       [2]................:

[1] Reset is asserted.
[2] Period of 5000 - 5100 usec.
[2-1] ESW_P3_LED_0 goes low.
[2-2] Remaining period of 5000 - 5100 usec.
[3] Reset is deasserted.
[4] Period of 310 usec. HWTRAP register is populated with bootstrapped
    XTAL frequency.
[5] Signals reflect the bootstrapped configuration.

ESW_P3_LED_0 low period before reset deassertion:

              5000 usec
            - 5100 usec
    TEST     RESET HOLD
       #         (usec)
  ---------------------
       1           5410
       2           5440
       3           4375
       4           5490
       5           5475
       6           4335
       7           4370
       8           5435
       9           4205
      10           4335
      11           3750
      12           3170
      13           4395
      14           4375
      15           3515
      16           4335
      17           4220
      18           4175
      19           4175
      20           4350

     Min           3170
     Max           5490

  Median       4342.500
     Avg       4466.500

Revert commit 2920dd92b980 ("net: dsa: mt7530: disable LEDs before reset").
Changing the state of pins via reset assertion is simpler and more
efficient than doing so by setting the LED controller off.

Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Co-developed-by: Justin Swartz <justin.swartz@risingedge.co.za>
Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mt7530.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 4056ca4255be7..0fbed76bb9697 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1581,11 +1581,11 @@ mt7530_setup(struct dsa_switch *ds)
 	 */
 	if (priv->mcm) {
 		reset_control_assert(priv->rstc);
-		usleep_range(1000, 1100);
+		usleep_range(5000, 5100);
 		reset_control_deassert(priv->rstc);
 	} else {
 		gpiod_set_value_cansleep(priv->reset, 0);
-		usleep_range(1000, 1100);
+		usleep_range(5000, 5100);
 		gpiod_set_value_cansleep(priv->reset, 1);
 	}
 
@@ -1704,11 +1704,11 @@ mt7531_setup(struct dsa_switch *ds)
 	 */
 	if (priv->mcm) {
 		reset_control_assert(priv->rstc);
-		usleep_range(1000, 1100);
+		usleep_range(5000, 5100);
 		reset_control_deassert(priv->rstc);
 	} else {
 		gpiod_set_value_cansleep(priv->reset, 0);
-		usleep_range(1000, 1100);
+		usleep_range(5000, 5100);
 		gpiod_set_value_cansleep(priv->reset, 1);
 	}
 
-- 
2.43.0

[PATCH 5.10 225/238] wireguard: receive: annotate data-race around receiving_counter.counter

[Sasha Levin]

From: Nikita Zhandarovich <n.zhandarovich@fintech.ru>

[ Upstream commit bba045dc4d996d03dce6fe45726e78a1a1f6d4c3 ]

Syzkaller with KCSAN identified a data-race issue when accessing
keypair->receiving_counter.counter. Use READ_ONCE() and WRITE_ONCE()
annotations to mark the data race as intentional.

    BUG: KCSAN: data-race in wg_packet_decrypt_worker / wg_packet_rx_poll

    write to 0xffff888107765888 of 8 bytes by interrupt on cpu 0:
     counter_validate drivers/net/wireguard/receive.c:321 [inline]
     wg_packet_rx_poll+0x3ac/0xf00 drivers/net/wireguard/receive.c:461
     __napi_poll+0x60/0x3b0 net/core/dev.c:6536
     napi_poll net/core/dev.c:6605 [inline]
     net_rx_action+0x32b/0x750 net/core/dev.c:6738
     __do_softirq+0xc4/0x279 kernel/softirq.c:553
     do_softirq+0x5e/0x90 kernel/softirq.c:454
     __local_bh_enable_ip+0x64/0x70 kernel/softirq.c:381
     __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline]
     _raw_spin_unlock_bh+0x36/0x40 kernel/locking/spinlock.c:210
     spin_unlock_bh include/linux/spinlock.h:396 [inline]
     ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline]
     wg_packet_decrypt_worker+0x6c5/0x700 drivers/net/wireguard/receive.c:499
     process_one_work kernel/workqueue.c:2633 [inline]
     ...

    read to 0xffff888107765888 of 8 bytes by task 3196 on cpu 1:
     decrypt_packet drivers/net/wireguard/receive.c:252 [inline]
     wg_packet_decrypt_worker+0x220/0x700 drivers/net/wireguard/receive.c:501
     process_one_work kernel/workqueue.c:2633 [inline]
     process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2706
     worker_thread+0x525/0x730 kernel/workqueue.c:2787
     ...

Fixes: a9e90d9931f3 ("wireguard: noise: separate receive counter from send counter")
Reported-by: syzbot+d1de830e4ecdaac83d89@syzkaller.appspotmail.com
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireguard/receive.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireguard/receive.c b/drivers/net/wireguard/receive.c
index d38b24339a1f9..ed274e9bdf3ce 100644
--- a/drivers/net/wireguard/receive.c
+++ b/drivers/net/wireguard/receive.c
@@ -258,7 +258,7 @@ static bool decrypt_packet(struct sk_buff *skb, struct noise_keypair *keypair)
 
 	if (unlikely(!READ_ONCE(keypair->receiving.is_valid) ||
 		  wg_birthdate_has_expired(keypair->receiving.birthdate, REJECT_AFTER_TIME) ||
-		  keypair->receiving_counter.counter >= REJECT_AFTER_MESSAGES)) {
+		  READ_ONCE(keypair->receiving_counter.counter) >= REJECT_AFTER_MESSAGES)) {
 		WRITE_ONCE(keypair->receiving.is_valid, false);
 		return false;
 	}
@@ -325,7 +325,7 @@ static bool counter_validate(struct noise_replay_counter *counter, u64 their_cou
 		for (i = 1; i <= top; ++i)
 			counter->backtrack[(i + index_current) &
 				((COUNTER_BITS_TOTAL / BITS_PER_LONG) - 1)] = 0;
-		counter->counter = their_counter;
+		WRITE_ONCE(counter->counter, their_counter);
 	}
 
 	index &= (COUNTER_BITS_TOTAL / BITS_PER_LONG) - 1;
@@ -470,7 +470,7 @@ int wg_packet_rx_poll(struct napi_struct *napi, int budget)
 			net_dbg_ratelimited("%s: Packet has invalid nonce %llu (max %llu)\n",
 					    peer->device->dev->name,
 					    PACKET_CB(skb)->nonce,
-					    keypair->receiving_counter.counter);
+					    READ_ONCE(keypair->receiving_counter.counter));
 			goto next;
 		}
 
-- 
2.43.0

[PATCH 5.10 226/238] rds: introduce acquire/release ordering in acquire/release_in_xmit()

[Sasha Levin]

From: Yewon Choi <woni9911@gmail.com>

[ Upstream commit 1422f28826d2a0c11e5240b3e951c9e214d8656e ]

acquire/release_in_xmit() work as bit lock in rds_send_xmit(), so they
are expected to ensure acquire/release memory ordering semantics.
However, test_and_set_bit/clear_bit() don't imply such semantics, on
top of this, following smp_mb__after_atomic() does not guarantee release
ordering (memory barrier actually should be placed before clear_bit()).

Instead, we use clear_bit_unlock/test_and_set_bit_lock() here.

Fixes: 0f4b1c7e89e6 ("rds: fix rds_send_xmit() serialization")
Fixes: 1f9ecd7eacfd ("RDS: Pass rds_conn_path to rds_send_xmit()")
Signed-off-by: Yewon Choi <woni9911@gmail.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/r/ZfQUxnNTO9AJmzwc@libra05
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rds/send.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/net/rds/send.c b/net/rds/send.c
index 65eeb82cb5de5..1923eaa91e939 100644
--- a/net/rds/send.c
+++ b/net/rds/send.c
@@ -103,13 +103,12 @@ EXPORT_SYMBOL_GPL(rds_send_path_reset);
 
 static int acquire_in_xmit(struct rds_conn_path *cp)
 {
-	return test_and_set_bit(RDS_IN_XMIT, &cp->cp_flags) == 0;
+	return test_and_set_bit_lock(RDS_IN_XMIT, &cp->cp_flags) == 0;
 }
 
 static void release_in_xmit(struct rds_conn_path *cp)
 {
-	clear_bit(RDS_IN_XMIT, &cp->cp_flags);
-	smp_mb__after_atomic();
+	clear_bit_unlock(RDS_IN_XMIT, &cp->cp_flags);
 	/*
 	 * We don't use wait_on_bit()/wake_up_bit() because our waking is in a
 	 * hot path and finding waiters is very rare.  We don't want to walk
-- 
2.43.0

[PATCH 5.10 227/238] hsr: Handle failures in module init

[Sasha Levin]

From: Felix Maurer <fmaurer@redhat.com>

[ Upstream commit 3cf28cd492308e5f63ed00b29ea03ca016264376 ]

A failure during registration of the netdev notifier was not handled at
all. A failure during netlink initialization did not unregister the netdev
notifier.

Handle failures of netdev notifier registration and netlink initialization.
Both functions should only return negative values on failure and thereby
lead to the hsr module not being loaded.

Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/3ce097c15e3f7ace98fc7fd9bcbf299f092e63d1.1710504184.git.fmaurer@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/hsr/hsr_main.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/net/hsr/hsr_main.c b/net/hsr/hsr_main.c
index 2fd1976e5b1c3..bea7f935f38e9 100644
--- a/net/hsr/hsr_main.c
+++ b/net/hsr/hsr_main.c
@@ -137,14 +137,21 @@ static struct notifier_block hsr_nb = {
 
 static int __init hsr_init(void)
 {
-	int res;
+	int err;
 
 	BUILD_BUG_ON(sizeof(struct hsr_tag) != HSR_HLEN);
 
-	register_netdevice_notifier(&hsr_nb);
-	res = hsr_netlink_init();
+	err = register_netdevice_notifier(&hsr_nb);
+	if (err)
+		return err;
+
+	err = hsr_netlink_init();
+	if (err) {
+		unregister_netdevice_notifier(&hsr_nb);
+		return err;
+	}
 
-	return res;
+	return 0;
 }
 
 static void __exit hsr_exit(void)
-- 
2.43.0

[PATCH 5.10 228/238] net/bnx2x: Prevent access to a freed page in page_pool

[Sasha Levin]

From: Thinh Tran <thinhtr@linux.ibm.com>

[ Upstream commit d27e2da94a42655861ca4baea30c8cd65546f25d ]

Fix race condition leading to system crash during EEH error handling

During EEH error recovery, the bnx2x driver's transmit timeout logic
could cause a race condition when handling reset tasks. The
bnx2x_tx_timeout() schedules reset tasks via bnx2x_sp_rtnl_task(),
which ultimately leads to bnx2x_nic_unload(). In bnx2x_nic_unload()
SGEs are freed using bnx2x_free_rx_sge_range(). However, this could
overlap with the EEH driver's attempt to reset the device using
bnx2x_io_slot_reset(), which also tries to free SGEs. This race
condition can result in system crashes due to accessing freed memory
locations in bnx2x_free_rx_sge()

799  static inline void bnx2x_free_rx_sge(struct bnx2x *bp,
800				struct bnx2x_fastpath *fp, u16 index)
801  {
802	struct sw_rx_page *sw_buf = &fp->rx_page_ring[index];
803     struct page *page = sw_buf->page;
....
where sw_buf was set to NULL after the call to dma_unmap_page()
by the preceding thread.

    EEH: Beginning: 'slot_reset'
    PCI 0011:01:00.0#10000: EEH: Invoking bnx2x->slot_reset()
    bnx2x: [bnx2x_io_slot_reset:14228(eth1)]IO slot reset initializing...
    bnx2x 0011:01:00.0: enabling device (0140 -> 0142)
    bnx2x: [bnx2x_io_slot_reset:14244(eth1)]IO slot reset --> driver unload
    Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
    BUG: Kernel NULL pointer dereference on read at 0x00000000
    Faulting instruction address: 0xc0080000025065fc
    Oops: Kernel access of bad area, sig: 11 [#1]
    .....
    Call Trace:
    [c000000003c67a20] [c00800000250658c] bnx2x_io_slot_reset+0x204/0x610 [bnx2x] (unreliable)
    [c000000003c67af0] [c0000000000518a8] eeh_report_reset+0xb8/0xf0
    [c000000003c67b60] [c000000000052130] eeh_pe_report+0x180/0x550
    [c000000003c67c70] [c00000000005318c] eeh_handle_normal_event+0x84c/0xa60
    [c000000003c67d50] [c000000000053a84] eeh_event_handler+0xf4/0x170
    [c000000003c67da0] [c000000000194c58] kthread+0x1c8/0x1d0
    [c000000003c67e10] [c00000000000cf64] ret_from_kernel_thread+0x5c/0x64

To solve this issue, we need to verify page pool allocations before
freeing.

Fixes: 4cace675d687 ("bnx2x: Alloc 4k fragment for each rx ring buffer element")
Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240315205535.1321-1-thinhtr@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index d8b1824c334d3..0bc1367fd6492 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -1002,9 +1002,6 @@ static inline void bnx2x_set_fw_mac_addr(__le16 *fw_hi, __le16 *fw_mid,
 static inline void bnx2x_free_rx_mem_pool(struct bnx2x *bp,
 					  struct bnx2x_alloc_pool *pool)
 {
-	if (!pool->page)
-		return;
-
 	put_page(pool->page);
 
 	pool->page = NULL;
@@ -1015,6 +1012,9 @@ static inline void bnx2x_free_rx_sge_range(struct bnx2x *bp,
 {
 	int i;
 
+	if (!fp->page_pool.page)
+		return;
+
 	if (fp->mode == TPA_MODE_DISABLED)
 		return;
 
-- 
2.43.0

[PATCH 5.10 229/238] octeontx2-af: Use separate handlers for interrupts

[Sasha Levin]

From: Subbaraya Sundeep <sbhatta@marvell.com>

[ Upstream commit 50e60de381c342008c0956fd762e1c26408f372c ]

For PF to AF interrupt vector and VF to AF vector same
interrupt handler is registered which is causing race condition.
When two interrupts are raised to two CPUs at same time
then two cores serve same event corrupting the data.

Fixes: 7304ac4567bc ("octeontx2-af: Add mailbox IRQ and msg handlers")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/octeontx2/af/rvu.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
index acbc67074f59c..23b829f974de1 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
@@ -1969,10 +1969,9 @@ static void rvu_queue_work(struct mbox_wq_info *mw, int first,
 	}
 }
 
-static irqreturn_t rvu_mbox_intr_handler(int irq, void *rvu_irq)
+static irqreturn_t rvu_mbox_pf_intr_handler(int irq, void *rvu_irq)
 {
 	struct rvu *rvu = (struct rvu *)rvu_irq;
-	int vfs = rvu->vfs;
 	u64 intr;
 
 	intr = rvu_read64(rvu, BLKADDR_RVUM, RVU_AF_PFAF_MBOX_INT);
@@ -1986,6 +1985,18 @@ static irqreturn_t rvu_mbox_intr_handler(int irq, void *rvu_irq)
 
 	rvu_queue_work(&rvu->afpf_wq_info, 0, rvu->hw->total_pfs, intr);
 
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t rvu_mbox_intr_handler(int irq, void *rvu_irq)
+{
+	struct rvu *rvu = (struct rvu *)rvu_irq;
+	int vfs = rvu->vfs;
+	u64 intr;
+
+	/* Sync with mbox memory region */
+	rmb();
+
 	/* Handle VF interrupts */
 	if (vfs > 64) {
 		intr = rvupf_read64(rvu, RVU_PF_VFPF_MBOX_INTX(1));
@@ -2300,7 +2311,7 @@ static int rvu_register_interrupts(struct rvu *rvu)
 	/* Register mailbox interrupt handler */
 	sprintf(&rvu->irq_name[RVU_AF_INT_VEC_MBOX * NAME_SIZE], "RVUAF Mbox");
 	ret = request_irq(pci_irq_vector(rvu->pdev, RVU_AF_INT_VEC_MBOX),
-			  rvu_mbox_intr_handler, 0,
+			  rvu_mbox_pf_intr_handler, 0,
 			  &rvu->irq_name[RVU_AF_INT_VEC_MBOX * NAME_SIZE], rvu);
 	if (ret) {
 		dev_err(rvu->dev,
-- 
2.43.0

[PATCH 5.10 230/238] netfilter: nft_set_pipapo: release elements in clone only from destroy path

[Sasha Levin]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit b0e256f3dd2ba6532f37c5c22e07cb07a36031ee ]

Clone already always provides a current view of the lookup table, use it
to destroy the set, otherwise it is possible to destroy elements twice.

This fix requires:

 212ed75dc5fb ("netfilter: nf_tables: integrate pipapo into commit protocol")

which came after:

 9827a0e6e23b ("netfilter: nft_set_pipapo: release elements in clone from abort path").

Fixes: 9827a0e6e23b ("netfilter: nft_set_pipapo: release elements in clone from abort path")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_set_pipapo.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/net/netfilter/nft_set_pipapo.c b/net/netfilter/nft_set_pipapo.c
index 70a59a35d1761..b9682e085fcef 100644
--- a/net/netfilter/nft_set_pipapo.c
+++ b/net/netfilter/nft_set_pipapo.c
@@ -2226,8 +2226,6 @@ static void nft_pipapo_destroy(const struct nft_ctx *ctx,
 	if (m) {
 		rcu_barrier();
 
-		nft_set_pipapo_match_destroy(ctx, set, m);
-
 		for_each_possible_cpu(cpu)
 			pipapo_free_scratch(m, cpu);
 		free_percpu(m->scratch);
@@ -2239,8 +2237,7 @@ static void nft_pipapo_destroy(const struct nft_ctx *ctx,
 	if (priv->clone) {
 		m = priv->clone;
 
-		if (priv->dirty)
-			nft_set_pipapo_match_destroy(ctx, set, m);
+		nft_set_pipapo_match_destroy(ctx, set, m);
 
 		for_each_possible_cpu(cpu)
 			pipapo_free_scratch(priv->clone, cpu);
-- 
2.43.0

[PATCH 5.10 231/238] scsi: fc: Update formal FPIN descriptor definitions

[Sasha Levin]

From: Shyam Sundar <ssundar@marvell.com>

[ Upstream commit 874163aab75a6cd7422e71f1fbc6db12977fcf1d ]

Add Fabric Performance Impact Notification (FPIN) descriptor definitions
for the following FPINs:

 - Delivery Notification Descriptor

 - Peer Congestion Notification Descriptor

 - Congestion Notification Descriptor

Link: https://lore.kernel.org/r/20201021092715.22669-2-njavali@marvell.com
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 4a0e7f2decbf ("netfilter: nf_tables: do not compare internal table flags on updates")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/uapi/scsi/fc/fc_els.h | 114 +++++++++++++++++++++++++++++++++-
 1 file changed, 113 insertions(+), 1 deletion(-)

diff --git a/include/uapi/scsi/fc/fc_els.h b/include/uapi/scsi/fc/fc_els.h
index 8c704e510e398..91d4be9872203 100644
--- a/include/uapi/scsi/fc/fc_els.h
+++ b/include/uapi/scsi/fc/fc_els.h
@@ -916,7 +916,9 @@ enum fc_els_clid_ic {
 	ELS_CLID_IC_LIP =	8,	/* receiving LIP */
 };
 
-
+/*
+ * Link Integrity event types
+ */
 enum fc_fpin_li_event_types {
 	FPIN_LI_UNKNOWN =		0x0,
 	FPIN_LI_LINK_FAILURE =		0x1,
@@ -943,6 +945,54 @@ enum fc_fpin_li_event_types {
 	{ FPIN_LI_DEVICE_SPEC,		"Device Specific" },		\
 }
 
+/*
+ * Delivery event types
+ */
+enum fc_fpin_deli_event_types {
+	FPIN_DELI_UNKNOWN =		0x0,
+	FPIN_DELI_TIMEOUT =		0x1,
+	FPIN_DELI_UNABLE_TO_ROUTE =	0x2,
+	FPIN_DELI_DEVICE_SPEC =		0xF,
+};
+
+/*
+ * Initializer useful for decoding table.
+ * Please keep this in sync with the above definitions.
+ */
+#define FC_FPIN_DELI_EVT_TYPES_INIT {					\
+	{ FPIN_DELI_UNKNOWN,		"Unknown" },			\
+	{ FPIN_DELI_TIMEOUT,		"Timeout" },			\
+	{ FPIN_DELI_UNABLE_TO_ROUTE,	"Unable to Route" },		\
+	{ FPIN_DELI_DEVICE_SPEC,	"Device Specific" },		\
+}
+
+/*
+ * Congestion event types
+ */
+enum fc_fpin_congn_event_types {
+	FPIN_CONGN_CLEAR =		0x0,
+	FPIN_CONGN_LOST_CREDIT =	0x1,
+	FPIN_CONGN_CREDIT_STALL =	0x2,
+	FPIN_CONGN_OVERSUBSCRIPTION =	0x3,
+	FPIN_CONGN_DEVICE_SPEC =	0xF,
+};
+
+/*
+ * Initializer useful for decoding table.
+ * Please keep this in sync with the above definitions.
+ */
+#define FC_FPIN_CONGN_EVT_TYPES_INIT {					\
+	{ FPIN_CONGN_CLEAR,		"Clear" },			\
+	{ FPIN_CONGN_LOST_CREDIT,	"Lost Credit" },		\
+	{ FPIN_CONGN_CREDIT_STALL,	"Credit Stall" },		\
+	{ FPIN_CONGN_OVERSUBSCRIPTION,	"Oversubscription" },		\
+	{ FPIN_CONGN_DEVICE_SPEC,	"Device Specific" },		\
+}
+
+enum fc_fpin_congn_severity_types {
+	FPIN_CONGN_SEVERITY_WARNING =	0xF1,
+	FPIN_CONGN_SEVERITY_ERROR =	0xF7,
+};
 
 /*
  * Link Integrity Notification Descriptor
@@ -974,6 +1024,68 @@ struct fc_fn_li_desc {
 					 */
 };
 
+/*
+ * Delivery Notification Descriptor
+ */
+struct fc_fn_deli_desc {
+	__be32		desc_tag;	/* Descriptor Tag (0x00020002) */
+	__be32		desc_len;	/* Length of Descriptor (in bytes).
+					 * Size of descriptor excluding
+					 * desc_tag and desc_len fields.
+					 */
+	__be64		detecting_wwpn;	/* Port Name that detected event */
+	__be64		attached_wwpn;	/* Port Name of device attached to
+					 * detecting Port Name
+					 */
+	__be32		deli_reason_code;/* see enum fc_fpin_deli_event_types */
+};
+
+/*
+ * Peer Congestion Notification Descriptor
+ */
+struct fc_fn_peer_congn_desc {
+	__be32		desc_tag;	/* Descriptor Tag (0x00020003) */
+	__be32		desc_len;	/* Length of Descriptor (in bytes).
+					 * Size of descriptor excluding
+					 * desc_tag and desc_len fields.
+					 */
+	__be64		detecting_wwpn;	/* Port Name that detected event */
+	__be64		attached_wwpn;	/* Port Name of device attached to
+					 * detecting Port Name
+					 */
+	__be16		event_type;	/* see enum fc_fpin_congn_event_types */
+	__be16		event_modifier;	/* Implementation specific value
+					 * describing the event type
+					 */
+	__be32		event_period;	/* duration (ms) of the detected
+					 * congestion event
+					 */
+	__be32		pname_count;	/* number of portname_list elements */
+	__be64		pname_list[0];	/* list of N_Port_Names accessible
+					 * through the attached port
+					 */
+};
+
+/*
+ * Congestion Notification Descriptor
+ */
+struct fc_fn_congn_desc {
+	__be32		desc_tag;	/* Descriptor Tag (0x00020004) */
+	__be32		desc_len;	/* Length of Descriptor (in bytes).
+					 * Size of descriptor excluding
+					 * desc_tag and desc_len fields.
+					 */
+	__be16		event_type;	/* see enum fc_fpin_congn_event_types */
+	__be16		event_modifier;	/* Implementation specific value
+					 * describing the event type
+					 */
+	__be32		event_period;	/* duration (ms) of the detected
+					 * congestion event
+					 */
+	__u8		severity;	/* command */
+	__u8		resv[3];	/* reserved - must be zero */
+};
+
 /*
  * ELS_FPIN - Fabric Performance Impact Notification
  */
-- 
2.43.0

[PATCH 5.10 232/238] ARM: dts: sun8i-h2-plus-bananapi-m2-zero: add regulator nodes vcc-dram and vcc1v2

[Sasha Levin]

From: Michael Klein <michael@fossekall.de>

[ Upstream commit 23e85be1ec81647374055f731488cc9a7c013a5c ]

Add regulator nodes vcc-dram and vcc1v2 to the devicetree. These
regulators correspond to U4 and U5 in the schematics:

http://forum.banana-pi.org/t/bpi-m2-zero-schematic-diagram-public/4111

Signed-off-by: Michael Klein <michael@fossekall.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20201130183841.136708-1-michael@fossekall.de
Stable-dep-of: 4a0e7f2decbf ("netfilter: nf_tables: do not compare internal table flags on updates")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../dts/sun8i-h2-plus-bananapi-m2-zero.dts    | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
index 4c6704e4c57ec..74d5732c412ba 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -62,6 +62,30 @@ reg_vdd_cpux: vdd-cpux-regulator {
 		states = <1100000 0>, <1300000 1>;
 	};
 
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	reg_vcc1v2: vcc1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		vin-supply = <&reg_vcc5v0>;
+	};
+
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-- 
2.43.0

[PATCH 5.10 233/238] netfilter: nf_tables: do not compare internal table flags on updates

[Sasha Levin]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 4a0e7f2decbf9bd72461226f1f5f7dcc4b08f139 ]

Restore skipping transaction if table update does not modify flags.

Fixes: 179d9ba5559a ("netfilter: nf_tables: fix table flag updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 73b0a6925304c..8d4472b127e41 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -1097,7 +1097,7 @@ static int nf_tables_updtable(struct nft_ctx *ctx)
 	if (flags & ~NFT_TABLE_F_DORMANT)
 		return -EINVAL;
 
-	if (flags == ctx->table->flags)
+	if (flags == (ctx->table->flags & NFT_TABLE_F_MASK))
 		return 0;
 
 	/* No dormant off/on/off/on games in single transaction */
-- 
2.43.0

[PATCH 5.10 234/238] rcu: add a helper to report consolidated flavor QS

[Sasha Levin]

From: Yan Zhai <yan@cloudflare.com>

[ Upstream commit 1a77557d48cff187a169c2aec01c0dd78a5e7e50 ]

When under heavy load, network processing can run CPU-bound for many
tens of seconds. Even in preemptible kernels (non-RT kernel), this can
block RCU Tasks grace periods, which can cause trace-event removal to
take more than a minute, which is unacceptably long.

This commit therefore creates a new helper function that passes through
both RCU and RCU-Tasks quiescent states every 100 milliseconds. This
hard-coded value suffices for current workloads.

Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/90431d46ee112d2b0af04dbfe936faaca11810a5.1710877680.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 00bf63122459 ("bpf: report RCU QS in cpumap kthread")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/rcupdate.h | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 0122c03da24af..9db6710e6ee7b 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -226,6 +226,37 @@ do { \
 	cond_resched(); \
 } while (0)
 
+/**
+ * rcu_softirq_qs_periodic - Report RCU and RCU-Tasks quiescent states
+ * @old_ts: jiffies at start of processing.
+ *
+ * This helper is for long-running softirq handlers, such as NAPI threads in
+ * networking. The caller should initialize the variable passed in as @old_ts
+ * at the beginning of the softirq handler. When invoked frequently, this macro
+ * will invoke rcu_softirq_qs() every 100 milliseconds thereafter, which will
+ * provide both RCU and RCU-Tasks quiescent states. Note that this macro
+ * modifies its old_ts argument.
+ *
+ * Because regions of code that have disabled softirq act as RCU read-side
+ * critical sections, this macro should be invoked with softirq (and
+ * preemption) enabled.
+ *
+ * The macro is not needed when CONFIG_PREEMPT_RT is defined. RT kernels would
+ * have more chance to invoke schedule() calls and provide necessary quiescent
+ * states. As a contrast, calling cond_resched() only won't achieve the same
+ * effect because cond_resched() does not provide RCU-Tasks quiescent states.
+ */
+#define rcu_softirq_qs_periodic(old_ts) \
+do { \
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT) && \
+	    time_after(jiffies, (old_ts) + HZ / 10)) { \
+		preempt_disable(); \
+		rcu_softirq_qs(); \
+		preempt_enable(); \
+		(old_ts) = jiffies; \
+	} \
+} while (0)
+
 /*
  * Infrastructure to implement the synchronize_() primitives in
  * TREE_RCU and rcu_barrier_() primitives in TINY_RCU.
-- 
2.43.0

[PATCH 5.10 235/238] bpf: report RCU QS in cpumap kthread

[Sasha Levin]

From: Yan Zhai <yan@cloudflare.com>

[ Upstream commit 00bf63122459e87193ee7f1bc6161c83a525569f ]

When there are heavy load, cpumap kernel threads can be busy polling
packets from redirect queues and block out RCU tasks from reaching
quiescent states. It is insufficient to just call cond_resched() in such
context. Periodically raise a consolidated RCU QS before cond_resched
fixes the problem.

Fixes: 6710e1126934 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP")
Reviewed-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/c17b9f1517e19d813da3ede5ed33ee18496bb5d8.1710877680.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/cpumap.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/kernel/bpf/cpumap.c b/kernel/bpf/cpumap.c
index 2dcc04b2f330e..9a4378df45998 100644
--- a/kernel/bpf/cpumap.c
+++ b/kernel/bpf/cpumap.c
@@ -299,6 +299,7 @@ static int cpu_map_bpf_prog_run_xdp(struct bpf_cpu_map_entry *rcpu,
 static int cpu_map_kthread_run(void *data)
 {
 	struct bpf_cpu_map_entry *rcpu = data;
+	unsigned long last_qs = jiffies;
 
 	set_current_state(TASK_INTERRUPTIBLE);
 
@@ -322,10 +323,12 @@ static int cpu_map_kthread_run(void *data)
 			if (__ptr_ring_empty(rcpu->queue)) {
 				schedule();
 				sched = 1;
+				last_qs = jiffies;
 			} else {
 				__set_current_state(TASK_RUNNING);
 			}
 		} else {
+			rcu_softirq_qs_periodic(last_qs);
 			sched = cond_resched();
 		}
 
-- 
2.43.0

[PATCH 5.10 236/238] spi: spi-mt65xx: Fix NULL pointer access in interrupt handler

[Sasha Levin]

From: Fei Shao <fshao@chromium.org>

[ Upstream commit a20ad45008a7c82f1184dc6dee280096009ece55 ]

The TX buffer in spi_transfer can be a NULL pointer, so the interrupt
handler may end up writing to the invalid memory and cause crashes.

Add a check to trans->tx_buf before using it.

Fixes: 1ce24864bff4 ("spi: mediatek: Only do dma for 4-byte aligned buffers")
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/20240321070942.1587146-2-fshao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-mt65xx.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 92a09dfb99a8e..0bcf4a28132ad 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -566,17 +566,19 @@ static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id)
 		mdata->xfer_len = min(MTK_SPI_MAX_FIFO_SIZE, len);
 		mtk_spi_setup_packet(master);
 
-		cnt = mdata->xfer_len / 4;
-		iowrite32_rep(mdata->base + SPI_TX_DATA_REG,
-				trans->tx_buf + mdata->num_xfered, cnt);
+		if (trans->tx_buf) {
+			cnt = mdata->xfer_len / 4;
+			iowrite32_rep(mdata->base + SPI_TX_DATA_REG,
+					trans->tx_buf + mdata->num_xfered, cnt);
 
-		remainder = mdata->xfer_len % 4;
-		if (remainder > 0) {
-			reg_val = 0;
-			memcpy(&reg_val,
-				trans->tx_buf + (cnt * 4) + mdata->num_xfered,
-				remainder);
-			writel(reg_val, mdata->base + SPI_TX_DATA_REG);
+			remainder = mdata->xfer_len % 4;
+			if (remainder > 0) {
+				reg_val = 0;
+				memcpy(&reg_val,
+					trans->tx_buf + (cnt * 4) + mdata->num_xfered,
+					remainder);
+				writel(reg_val, mdata->base + SPI_TX_DATA_REG);
+			}
 		}
 
 		mtk_spi_enable_transfer(master);
-- 
2.43.0

[PATCH 5.10 237/238] regmap: Add missing map->bus check

[Sasha Levin]

From: Marek Vasut <marex@denx.de>

[ Upstream commit 5c422f0b970d287efa864b8390a02face404db5d ]

The map->bus can be NULL here, add the missing NULL pointer check.

Fixes: d77e745613680 ("regmap: Add bulk read/write callbacks into regmap_config")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
To: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20220509003035.225272-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/regmap/regmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 2dfd6aa600450..a3c4086603a60 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -1796,7 +1796,7 @@ static int _regmap_raw_write_impl(struct regmap *map, unsigned int reg,
 				 map->format.reg_bytes +
 				 map->format.pad_bytes +
 				 val_len);
-	else if (map->bus->gather_write)
+	else if (map->bus && map->bus->gather_write)
 		ret = map->bus->gather_write(map->bus_context, map->work_buf,
 					     map->format.reg_bytes +
 					     map->format.pad_bytes,
-- 
2.43.0

[PATCH 5.10 238/238] Linux 5.10.214-rc1

[Sasha Levin]

Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Makefile b/Makefile
index b6af62d53d7a6..980bbbcfc2605 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 10
-SUBLEVEL = 213
-EXTRAVERSION =
+SUBLEVEL = 214
+EXTRAVERSION = -rc1
 NAME = Dare mighty things
 
 # *DOCUMENTATION*
-- 
2.43.0

Re: [PATCH 5.10 033/238] md: implement ->set_read_only to hook into BLKROSET processing

[Christoph Hellwig]

How did we end up backporting all these block layer API changes?

Re: [PATCH 5.10 000/238] 5.10.214-rc1 review

[Naresh Kamboju]

On Mon, 25 Mar 2024 at 05:10, Sasha Levin <sashal@kernel.org> wrote:
>
>
> This is the start of the stable review cycle for the 5.10.214 release.
> There are 238 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Tue Mar 26 11:40:23 PM UTC 2024.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-5.10.y&id2=v5.10.213
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> Thanks,
> Sasha

We're seeing regressions while building PowerPC with GCC 8 and 12 with
 ppc6xx_defconfig.

> Thomas Zimmermann (1):
>   arch/powerpc: Remove <linux/fb.h> from backlight code

-----8<-----
   /builds/linux/drivers/macintosh/via-pmu-backlight.c:22:20: error:
'FB_BACKLIGHT_LEVELS' undeclared here (not in a function)
      22 | static u8 bl_curve[FB_BACKLIGHT_LEVELS];
         |                    ^~~~~~~~~~~~~~~~~~~
   In file included from /builds/linux/include/linux/kernel.h:15,
                    from /builds/linux/include/asm-generic/bug.h:20,
                    from /builds/linux/arch/powerpc/include/asm/bug.h:109,
                    from /builds/linux/include/linux/bug.h:5,
                    from /builds/linux/include/linux/thread_info.h:12,
                    from /builds/linux/arch/powerpc/include/asm/ptrace.h:264,
                    from /builds/linux/drivers/macintosh/via-pmu-backlight.c:11:
----->8-----

Bisection points to:

   commit ee550f669e91c4cb0c884f38aa915497bc201585
   Author: Thomas Zimmermann <tzimmermann@suse.de>
   Date:   Wed Mar 6 13:28:20 2024 +0100
       arch/powerpc: Remove <linux/fb.h> from backlight code


Reverting that commit made the build pass again.

Reproducer:

   tuxmake --runtime podman --target-arch powerpc --toolchain gcc-12
--kconfig ppc6xx_defconfig

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>


Greetings!

Daniel Díaz
daniel.diaz@linaro.org

Re: [PATCH 5.10 033/238] md: implement ->set_read_only to hook into BLKROSET processing

[Sasha Levin]

On Mon, Mar 25, 2024 at 02:04:35AM +0100, Christoph Hellwig wrote:
>How did we end up backporting all these block layer API changes?

They were brought in as a dependency for 9674f54e41ff ("md: Don't clear
MD_CLOSING when the raid is about to stop").

It's possible to work around bringing them during backport, but I
preferred to bring the dependencies instead.

-- 
Thanks,
Sasha

Re: [PATCH 5.10 005/238] btrfs: add and use helper to check if block group is used

[David Sterba]

On Sun, Mar 24, 2024 at 07:36:33PM -0400, Sasha Levin wrote:
> From: Filipe Manana <fdmanana@suse.com>
> 
> [ Upstream commit 1693d5442c458ae8d5b0d58463b873cd879569ed ]
> 
> Add a helper function to determine if a block group is being used and make
> use of it at btrfs_delete_unused_bgs(). This helper will also be used in
> future code changes.
> 
> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
> Reviewed-by: Josef Bacik <josef@toxicpanda.com>
> Reviewed-by: Boris Burkov <boris@bur.io>
> Signed-off-by: Filipe Manana <fdmanana@suse.com>
> Reviewed-by: David Sterba <dsterba@suse.com>
> Signed-off-by: David Sterba <dsterba@suse.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

Please drop this patch from all stable branches unless it's a
prerequisite for some other patch. This is clearly a cleanup.

Re: [PATCH 5.10 033/238] md: implement ->set_read_only to hook into BLKROSET processing

[Christoph Hellwig]

On Mon, Mar 25, 2024 at 07:26:43AM -0400, Sasha Levin wrote:
> On Mon, Mar 25, 2024 at 02:04:35AM +0100, Christoph Hellwig wrote:
>> How did we end up backporting all these block layer API changes?
>
> They were brought in as a dependency for 9674f54e41ff ("md: Don't clear
> MD_CLOSING when the raid is about to stop").
>
> It's possible to work around bringing them during backport, but I
> preferred to bring the dependencies instead.

I really don't see what these giant backports bring us.  If people
want all the changes they'd just be better off on a modern kernel
rather than these frankenkernels.  The automatic backporting is
gettind way out of hand.  If the MD maintainers want
9674f54e41ff, maybe they can send a tailor made backport?

Re: [PATCH 5.10 033/238] md: implement ->set_read_only to hook into BLKROSET processing

[Song Liu]

Hi Li Nan,

Could you please look into this (back port 9674f54e41ff to older stable
kernels)? If there is no clean back port, I would recommend we not do
the back port.

Thanks,
Song

On Tue, Mar 26, 2024 at 12:40 AM Christoph Hellwig <hch@lst.de> wrote:
>
> On Mon, Mar 25, 2024 at 07:26:43AM -0400, Sasha Levin wrote:
> > On Mon, Mar 25, 2024 at 02:04:35AM +0100, Christoph Hellwig wrote:
> >> How did we end up backporting all these block layer API changes?
> >
> > They were brought in as a dependency for 9674f54e41ff ("md: Don't clear
> > MD_CLOSING when the raid is about to stop").
> >
> > It's possible to work around bringing them during backport, but I
> > preferred to bring the dependencies instead.
>
> I really don't see what these giant backports bring us.  If people
> want all the changes they'd just be better off on a modern kernel
> rather than these frankenkernels.  The automatic backporting is
> gettind way out of hand.  If the MD maintainers want
> 9674f54e41ff, maybe they can send a tailor made backport?

Re: [PATCH 5.10 000/238] 5.10.214-rc1 review

[Shreeya Patel]

On Monday, March 25, 2024 05:06 IST, Sasha Levin <sashal@kernel.org> wrote:

> 
> This is the start of the stable review cycle for the 5.10.214 release.
> There are 238 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Tue Mar 26 11:40:23 PM UTC 2024.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
>         https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-5.10.y&id2=v5.10.213
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 

KernelCI report for stable-rc/linux-5.10.y for this week.

## stable-rc HEAD for linux-5.10.y:
Date: 2024-03-25
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/log/?h=bbdc0ccf6f1665aabba4a0a227f9c118e86804eb

## Build failures:
No build failures seen for the stable-rc/linux-5.10.y commit head \o/

## Boot failures:
No **new** boot failures seen for the stable-rc/linux-5.10.y commit head \o/

Tested-by: kernelci.org bot <bot@kernelci.org>

Thanks,
Shreeya Patel

Re: [PATCH 5.10 033/238] md: implement ->set_read_only to hook into BLKROSET processing

[Li Nan]

在 2024/3/26 16:46, Song Liu 写道:
> Hi Li Nan,
> 
> Could you please look into this (back port 9674f54e41ff to older stable
> kernels)? If there is no clean back port, I would recommend we not do
> the back port.
> 

There are some conflicts to back port, which are not related to the
modification of this patch. If necessary, let me know and I can adapt and
send it :)

> Thanks,
> Song
> 
> On Tue, Mar 26, 2024 at 12:40 AM Christoph Hellwig <hch@lst.de> wrote:
>>
>> On Mon, Mar 25, 2024 at 07:26:43AM -0400, Sasha Levin wrote:
>>> On Mon, Mar 25, 2024 at 02:04:35AM +0100, Christoph Hellwig wrote:
>>>> How did we end up backporting all these block layer API changes?
>>>
>>> They were brought in as a dependency for 9674f54e41ff ("md: Don't clear
>>> MD_CLOSING when the raid is about to stop").
>>>
>>> It's possible to work around bringing them during backport, but I
>>> preferred to bring the dependencies instead.
>>
>> I really don't see what these giant backports bring us.  If people
>> want all the changes they'd just be better off on a modern kernel
>> rather than these frankenkernels.  The automatic backporting is
>> gettind way out of hand.  If the MD maintainers want
>> 9674f54e41ff, maybe they can send a tailor made backport?
> 
> .

-- 
Thanks,
Nan

Re: [PATCH 5.10 033/238] md: implement ->set_read_only to hook into BLKROSET processing

[Song Liu]

On Tue, Mar 26, 2024 at 6:18 PM Li Nan <linan666@huaweicloud.com> wrote:
>
> 在 2024/3/26 16:46, Song Liu 写道:
> > Hi Li Nan,
> >
> > Could you please look into this (back port 9674f54e41ff to older stable
> > kernels)? If there is no clean back port, I would recommend we not do
> > the back port.
> >
>
> There are some conflicts to back port, which are not related to the
> modification of this patch. If necessary, let me know and I can adapt and
> send it :)

I think it is not necessary to back port this to older kernels with conflicts.
The error case exists theoretically. But we never got a bug report for it.

Thanks,
Song

Re: [PATCH 5.10 005/238] btrfs: add and use helper to check if block group is used

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 2101 bytes --]

Hi!

> > From: Filipe Manana <fdmanana@suse.com>
> > 
> > [ Upstream commit 1693d5442c458ae8d5b0d58463b873cd879569ed ]
> > 
> > Add a helper function to determine if a block group is being used and make
> > use of it at btrfs_delete_unused_bgs(). This helper will also be used in
> > future code changes.
> > 
> > Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
> > Reviewed-by: Josef Bacik <josef@toxicpanda.com>
> > Reviewed-by: Boris Burkov <boris@bur.io>
> > Signed-off-by: Filipe Manana <fdmanana@suse.com>
> > Reviewed-by: David Sterba <dsterba@suse.com>
> > Signed-off-by: David Sterba <dsterba@suse.com>
> > Signed-off-by: Sasha Levin <sashal@kernel.org>
> 
> Please drop this patch from all stable branches unless it's a
> prerequisite for some other patch. This is clearly a cleanup.

This was reported multiple times, and you have even said you have
dropped the patch. What went wrong here?

Best regards,
								Pavel

Date: Mon, 18 Mar 2024 10:18:36 -0400
From: Sasha Levin <sashal@kernel.org>
Subject: Re: [PATCH AUTOSEL 5.10 1/7] btrfs: add and use helper to check if block group is used

On Mon, Mar 11, 2024 at 10:05:40PM +0100, David Sterba wrote:
> On Mon, Mar 11, 2024 at 10:00:43PM +0100, Pavel Machek wrote:
> > Hi!
> >
> > > From: Filipe Manana <fdmanana@suse.com>
> > >
> > > [ Upstream commit 1693d5442c458ae8d5b0d58463b873cd879569ed ]
> > >
> > > Add a helper function to determine if a block group is being used and make
> > > use of it at btrfs_delete_unused_bgs(). This helper will also be used in
> > > future code changes.
> >
> > Does not fix a bug and does not seem to be preparation for anything,
> > so probably should not be here.
>
> Agreed, this patch does not belong to stable and I objected in
> https://lore.kernel.org/all/20240229155207.GA2604@suse.cz/
>
> for version 6.7 and all other stable versions.

Dropped, thanks!

--
Thanks,
Sasha

-- 
DENX Software Engineering GmbH,        Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 5.10 127/238] HID: lenovo: Add middleclick_workaround sysfs knob for cptkbd

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1388 bytes --]

Hi!

> From: Mikhail Khvainitski <me@khvoinitsky.org>
> 
> [ Upstream commit 2814646f76f8518326964f12ff20aaee70ba154d ]
> 
> Previous attempt to autodetect well-behaving patched firmware
> introduced in commit 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw
> on cptkbd and stop applying workaround") has shown that there are
> false-positives on original firmware (on both 1st gen and 2nd gen
> keyboards) which causes the middle button click workaround to be
> mistakenly disabled.
> 
> This commit adds explicit parameter to sysfs to control this
> workaround.

Should this go to stable? We have stream of lenovo workarounds, maybe
-stable should wait for upstream to solve this.

Plus it should really have documentation.

Oh and we normally solve this stuff with module parameters, so that it
can be fixed during bootup.

Best regards,
							Pavel

> Fixes: 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround")
> Fixes: 43527a0094c1 ("HID: lenovo: Restrict detection of patched firmware only to USB cptkbd")
> Signed-off-by: Mikhail Khvainitski <me@khvoinitsky.org>
> Signed-off-by: Jiri Kosina <jkosina@suse.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

-- 
DENX Software Engineering GmbH,        Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 5.10 127/238] HID: lenovo: Add middleclick_workaround sysfs knob for cptkbd

[Mikhail Khvoinitsky]

Hi,
This patch is already on upstream. Unfortunately, previous backports
of related commits caused some issues so just skipping this one isn't
a good option.

For module parameters, while it's quite unrealistic for users to have
more than one identical keyboard but with different firmware, this is
possible and having a module option would prevent tuning only specific
keyboard.

For the documentation, makes sense. Sorry, I should have done it
together with the change, I'll fix it, thanks for pointing it out.

On Thu, 28 Mar 2024 at 12:40, Pavel Machek <pavel@denx.de> wrote:
>
> Hi!
>
> > From: Mikhail Khvainitski <me@khvoinitsky.org>
> >
> > [ Upstream commit 2814646f76f8518326964f12ff20aaee70ba154d ]
> >
> > Previous attempt to autodetect well-behaving patched firmware
> > introduced in commit 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw
> > on cptkbd and stop applying workaround") has shown that there are
> > false-positives on original firmware (on both 1st gen and 2nd gen
> > keyboards) which causes the middle button click workaround to be
> > mistakenly disabled.
> >
> > This commit adds explicit parameter to sysfs to control this
> > workaround.
>
> Should this go to stable? We have stream of lenovo workarounds, maybe
> -stable should wait for upstream to solve this.
>
> Plus it should really have documentation.
>
> Oh and we normally solve this stuff with module parameters, so that it
> can be fixed during bootup.
>
> Best regards,
>                                                         Pavel
>
> > Fixes: 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround")
> > Fixes: 43527a0094c1 ("HID: lenovo: Restrict detection of patched firmware only to USB cptkbd")
> > Signed-off-by: Mikhail Khvainitski <me@khvoinitsky.org>
> > Signed-off-by: Jiri Kosina <jkosina@suse.com>
> > Signed-off-by: Sasha Levin <sashal@kernel.org>
>
> --
> DENX Software Engineering GmbH,        Managing Director: Erika Unter
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany