[PATCH 4.9 00/62] 4.9.335-rc1 review

[PATCH 4.9 00/62] 4.9.335-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.335 release.
There are 62 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 07 Dec 2022 19:07:46 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.335-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.335-rc1

Adrian Hunter <adrian.hunter@intel.com>
    mmc: sdhci: Fix voltage switch delay

Masahiro Yamada <yamada.masahiro@socionext.com>
    mmc: sdhci: use FIELD_GET for preset value bit masks

Michael Kelley <mikelley@microsoft.com>
    x86/ioremap: Fix page aligned size calculation in __ioremap_caller()

Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
    Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM

Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
    x86/pm: Add enumeration check before spec MSRs save/restore setup

Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
    x86/tsx: Add a feature bit for TSX control MSR support

Ulrich Hecht <uli+cip@fpond.eu>
    Revert "fbdev: fb_pm2fb: Avoid potential divide by zero error"

Kuniyuki Iwashima <kuniyu@amazon.com>
    tcp/udp: Fix memory leak in ipv6_renew_options().

Xiongfeng Wang <wangxiongfeng2@huawei.com>
    iommu/vt-d: Fix PCI device refcount leak in dmar_dev_scope_init()

Maxim Korotkov <korotkov.maxim.s@gmail.com>
    pinctrl: single: Fix potential division by zero

Mark Brown <broonie@kernel.org>
    ASoC: ops: Fix bounds check for _sx controls

James Morse <james.morse@arm.com>
    arm64: errata: Fix KVM Spectre-v2 mitigation selection for Cortex-A57/A72

James Morse <james.morse@arm.com>
    arm64: Fix panic() when Spectre-v2 causes Spectre-BHB to re-allocate KVM vectors

ZhangPeng <zhangpeng362@huawei.com>
    nilfs2: fix NULL pointer dereference in nilfs_palloc_commit_free_entry()

Tiezhu Yang <yangtiezhu@loongson.cn>
    tools/vm/slabinfo-gnuplot: use "grep -E" instead of "egrep"

ChenXiaoSong <chenxiaosong2@huawei.com>
    btrfs: qgroup: fix sleep from invalid context bug in btrfs_qgroup_inherit()

Yang Yingliang <yangyingliang@huawei.com>
    hwmon: (coretemp) fix pci device refcount leak in nv1a_ram_new()

Phil Auld <pauld@redhat.com>
    hwmon: (coretemp) Check for null before removing sysfs attrs

Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
    net: ethernet: renesas: ravb: Fix promiscuous mode after system resumed

Willem de Bruijn <willemb@google.com>
    packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE

YueHaibing <yuehaibing@huawei.com>
    net: hsr: Fix potential use-after-free

Wang Hai <wanghai38@huawei.com>
    net/9p: Fix a potential socket leak in p9_socket_open

Yuan Can <yuancan@huawei.com>
    net: net_netdev: Fix error handling in ntb_netdev_init_module()

Yang Yingliang <yangyingliang@huawei.com>
    net: phy: fix null-ptr-deref while probe() failed

Duoming Zhou <duoming@zju.edu.cn>
    qlcnic: fix sleep-in-atomic-context bugs caused by msleep

Zhang Changzhong <zhangchangzhong@huawei.com>
    can: cc770: cc770_isa_probe(): add missing free_cc770dev()

Zhang Changzhong <zhangchangzhong@huawei.com>
    can: sja1000_isa: sja1000_isa_probe(): add missing free_sja1000dev()

YueHaibing <yuehaibing@huawei.com>
    net/mlx5: Fix uninitialized variable bug in outlen_write()

Gaosheng Cui <cuigaosheng1@huawei.com>
    hwmon: (ibmpex) Fix possible UAF when ibmpex_register_bmc() fails

Yang Yingliang <yangyingliang@huawei.com>
    hwmon: (i5500_temp) fix missing pci_disable_device()

Wei Yongjun <weiyongjun1@huawei.com>
    iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw

Wei Yongjun <weiyongjun1@huawei.com>
    iio: health: afe4403: Fix oob read in afe4403_read_raw

Christian König <christian.koenig@amd.com>
    drm/amdgpu: always register an MMU notifier for userptr

Enrico Sau <enrico.sau@gmail.com>
    net: usb: qmi_wwan: add Telit 0x103a composition

Gleb Mazovetskiy <glex.spb@gmail.com>
    tcp: configurable source port perturb table size

Xiongfeng Wang <wangxiongfeng2@huawei.com>
    platform/x86: asus-wmi: add missing pci_dev_put() in asus_wmi_set_xusb2pr()

ruanjinjie <ruanjinjie@huawei.com>
    xen/platform-pci: add missing free_irq() in error path

Lukas Wunner <lukas@wunner.de>
    serial: 8250: 8250_omap: Avoid RS485 RTS glitch on ->set_termios()

Chen Zhongjin <chenzhongjin@huawei.com>
    nilfs2: fix nilfs_sufile_mark_dirty() not set segment usage as dirty

Randy Dunlap <rdunlap@infradead.org>
    nios2: add FORCE for vmlinuz.gz

Masahiro Yamada <yamada.masahiro@socionext.com>
    kconfig: display recursive dependency resolution hint just once

Chen Zhongjin <chenzhongjin@huawei.com>
    iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails

Alejandro Concepción Rodríguez <asconcepcion@acoro.eu>
    iio: light: apds9960: fix wrong register for gesture gain

Heiko Carstens <hca@linux.ibm.com>
    s390/crashdump: fix TOD programmable field size

Yu Liao <liaoyu15@huawei.com>
    net: thunderx: Fix the ACPI memory leak

Martin Faltesek <mfaltesek@google.com>
    nfc: st-nci: fix memory leaks in EVT_TRANSACTION

Martin Faltesek <mfaltesek@google.com>
    nfc: st-nci: fix incorrect validating logic in EVT_TRANSACTION

Liu Shixin <liushixin2@huawei.com>
    NFC: nci: fix memory leak in nci_rx_data_packet()

Chen Zhongjin <chenzhongjin@huawei.com>
    xfrm: Fix ignored return value in xfrm6_init()

Zhang Changzhong <zhangchangzhong@huawei.com>
    net/qla3xxx: fix potential memleak in ql3xxx_send()

Peter Kosyh <pkosyh@yandex.ru>
    net/mlx4: Check retval of mlx4_bitmap_init

Zheng Yongjun <zhengyongjun3@huawei.com>
    ARM: mxs: fix memory leak in mxs_machine_init()

Zhengchao Shao <shaozhengchao@huawei.com>
    9p/fd: fix issue of list_del corruption in p9_fd_cancel()

Wang Hai <wanghai38@huawei.com>
    net: pch_gbe: fix potential memleak in pch_gbe_tx_queue()

Lin Ma <linma@zju.edu.cn>
    nfc/nci: fix race with opening and closing

Michael Grzeschik <m.grzeschik@pengutronix.de>
    ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrl

Samuel Holland <samuel@sholland.org>
    bus: sunxi-rsb: Support atomic transfers

Herbert Xu <herbert@gondor.apana.org.au>
    af_key: Fix send_acquire race with pfkey_register

Jason A. Donenfeld <Jason@zx2c4.com>
    MIPS: pic32: treat port as signed integer

Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
    wifi: mac80211: Fix ack frame idr leak when mesh has no route

Gaosheng Cui <cuigaosheng1@huawei.com>
    audit: fix undefined behavior in bit shift for AUDIT_BIT

Jonas Jelonek <jelonek.jonas@gmail.com>
    wifi: mac80211_hwsim: fix debugfs attribute ps with rc table support


-------------

Diffstat:

 Makefile                                           |  4 +-
 arch/arm/boot/dts/at91sam9g20ek_common.dtsi        |  9 +++
 arch/arm/mach-mxs/mach-mxs.c                       |  4 +-
 arch/arm64/kernel/cpu_errata.c                     | 25 +++++---
 arch/mips/include/asm/fw/fw.h                      |  2 +-
 arch/mips/pic32/pic32mzda/early_console.c          | 13 ++--
 arch/mips/pic32/pic32mzda/init.c                   |  2 +-
 arch/nios2/boot/Makefile                           |  2 +-
 arch/s390/kernel/crash_dump.c                      |  2 +-
 arch/x86/include/asm/cpufeatures.h                 |  1 +
 arch/x86/kernel/cpu/tsx.c                          | 33 +++++-----
 arch/x86/mm/ioremap.c                              |  8 ++-
 arch/x86/power/cpu.c                               | 23 ++++---
 drivers/bus/sunxi-rsb.c                            | 29 ++++++---
 drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c            |  8 +--
 drivers/hwmon/coretemp.c                           |  9 ++-
 drivers/hwmon/i5500_temp.c                         |  2 +-
 drivers/hwmon/ibmpex.c                             |  1 +
 drivers/iio/health/afe4403.c                       |  5 +-
 drivers/iio/health/afe4404.c                       | 12 ++--
 drivers/iio/industrialio-sw-trigger.c              |  6 +-
 drivers/iio/light/apds9960.c                       | 12 ++--
 drivers/iommu/dmar.c                               |  1 +
 drivers/mmc/host/sdhci.c                           | 71 ++++++++++++++++++----
 drivers/mmc/host/sdhci.h                           | 12 ++--
 drivers/net/can/cc770/cc770_isa.c                  | 10 +--
 drivers/net/can/sja1000/sja1000_isa.c              | 10 +--
 drivers/net/ethernet/cavium/thunder/thunder_bgx.c  |  4 +-
 drivers/net/ethernet/mellanox/mlx4/qp.c            |  3 +-
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c      |  4 +-
 .../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c   |  1 +
 drivers/net/ethernet/qlogic/qla3xxx.c              |  1 +
 .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c    |  4 +-
 drivers/net/ethernet/renesas/ravb_main.c           |  1 +
 drivers/net/ntb_netdev.c                           |  9 ++-
 drivers/net/phy/phy_device.c                       |  1 +
 drivers/net/usb/qmi_wwan.c                         |  1 +
 drivers/net/wireless/mac80211_hwsim.c              |  5 ++
 drivers/nfc/st-nci/se.c                            |  6 +-
 drivers/pinctrl/pinctrl-single.c                   |  2 +-
 drivers/platform/x86/asus-wmi.c                    |  2 +
 drivers/tty/serial/8250/8250_omap.c                |  7 ++-
 drivers/video/fbdev/pm2fb.c                        |  5 --
 drivers/xen/platform-pci.c                         |  7 ++-
 fs/btrfs/qgroup.c                                  |  9 +--
 fs/nilfs2/dat.c                                    |  7 +++
 fs/nilfs2/sufile.c                                 |  8 +++
 include/uapi/linux/audit.h                         |  2 +-
 net/9p/trans_fd.c                                  |  6 +-
 net/bluetooth/l2cap_core.c                         | 13 ++++
 net/hsr/hsr_forward.c                              |  5 +-
 net/ipv4/Kconfig                                   | 10 +++
 net/ipv4/inet_hashtables.c                         | 10 +--
 net/ipv6/ipv6_sockglue.c                           |  7 +++
 net/ipv6/xfrm6_policy.c                            |  6 +-
 net/key/af_key.c                                   | 32 +++++++---
 net/mac80211/mesh_pathtbl.c                        |  2 +-
 net/nfc/nci/core.c                                 |  2 +-
 net/nfc/nci/data.c                                 |  4 +-
 net/packet/af_packet.c                             |  6 +-
 scripts/kconfig/symbol.c                           |  8 ++-
 sound/soc/soc-ops.c                                |  2 +-
 tools/vm/slabinfo-gnuplot.sh                       |  4 +-
 63 files changed, 358 insertions(+), 164 deletions(-)

[PATCH 4.9 01/62] wifi: mac80211_hwsim: fix debugfs attribute ps with rc table support

[Greg Kroah-Hartman]

From: Jonas Jelonek <jelonek.jonas@gmail.com>

[ Upstream commit 69188df5f6e4cecc6b76b958979ba363cd5240e8 ]

Fixes a warning that occurs when rc table support is enabled
(IEEE80211_HW_SUPPORTS_RC_TABLE) in mac80211_hwsim and the PS mode
is changed via the exported debugfs attribute.

When the PS mode is changed, a packet is broadcasted via
hwsim_send_nullfunc by creating and transmitting a plain skb with only
header initialized. The ieee80211 rate array in the control buffer is
zero-initialized. When ratetbl support is enabled, ieee80211_get_tx_rates
is called for the skb with sta parameter set to NULL and thus no
ratetbl can be used. The final rate array then looks like
[-1,0; 0,0; 0,0; 0,0] which causes the warning in ieee80211_get_tx_rate.

The issue is fixed by setting the count of the first rate with idx '0'
to 1 and hence ieee80211_get_tx_rates won't overwrite it with idx '-1'.

Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mac80211_hwsim.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 70251c703c9e..53e0fec274a4 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -671,6 +671,7 @@ static void hwsim_send_nullfunc(struct mac80211_hwsim_data *data, u8 *mac,
 	struct hwsim_vif_priv *vp = (void *)vif->drv_priv;
 	struct sk_buff *skb;
 	struct ieee80211_hdr *hdr;
+	struct ieee80211_tx_info *cb;
 
 	if (!vp->assoc)
 		return;
@@ -691,6 +692,10 @@ static void hwsim_send_nullfunc(struct mac80211_hwsim_data *data, u8 *mac,
 	memcpy(hdr->addr2, mac, ETH_ALEN);
 	memcpy(hdr->addr3, vp->bssid, ETH_ALEN);
 
+	cb = IEEE80211_SKB_CB(skb);
+	cb->control.rates[0].count = 1;
+	cb->control.rates[1].idx = -1;
+
 	rcu_read_lock();
 	mac80211_hwsim_tx_frame(data->hw, skb,
 				rcu_dereference(vif->chanctx_conf)->def.chan);
-- 
2.35.1

[PATCH 4.9 02/62] audit: fix undefined behavior in bit shift for AUDIT_BIT

[Greg Kroah-Hartman]

From: Gaosheng Cui <cuigaosheng1@huawei.com>

[ Upstream commit 986d93f55bdeab1cac858d1e47b41fac10b2d7f6 ]

Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:

UBSAN: shift-out-of-bounds in kernel/auditfilter.c:179:23
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
 <TASK>
 dump_stack_lvl+0x7d/0xa5
 dump_stack+0x15/0x1b
 ubsan_epilogue+0xe/0x4e
 __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
 audit_register_class+0x9d/0x137
 audit_classes_init+0x4d/0xb8
 do_one_initcall+0x76/0x430
 kernel_init_freeable+0x3b3/0x422
 kernel_init+0x24/0x1e0
 ret_from_fork+0x1f/0x30
 </TASK>

Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
[PM: remove bad 'Fixes' tag as issue predates git, added in v2.6.6-rc1]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/uapi/linux/audit.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
index 208df7b44e90..d7ac6b9be18e 100644
--- a/include/uapi/linux/audit.h
+++ b/include/uapi/linux/audit.h
@@ -170,7 +170,7 @@
 #define AUDIT_MAX_KEY_LEN  256
 #define AUDIT_BITMASK_SIZE 64
 #define AUDIT_WORD(nr) ((__u32)((nr)/32))
-#define AUDIT_BIT(nr)  (1 << ((nr) - AUDIT_WORD(nr)*32))
+#define AUDIT_BIT(nr)  (1U << ((nr) - AUDIT_WORD(nr)*32))
 
 #define AUDIT_SYSCALL_CLASSES 16
 #define AUDIT_CLASS_DIR_WRITE 0
-- 
2.35.1

[PATCH 4.9 03/62] wifi: mac80211: Fix ack frame idr leak when mesh has no route

[Greg Kroah-Hartman]

From: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>

[ Upstream commit 39e7b5de9853bd92ddbfa4b14165babacd7da0ba ]

When trying to transmit an data frame with tx_status to a destination
that have no route in the mesh, then it is dropped without recrediting
the ack_status_frames idr.

Once it is exhausted, wpa_supplicant starts failing to do SAE with
NL80211_CMD_FRAME and logs "nl80211: Frame command failed".

Use ieee80211_free_txskb() instead of kfree_skb() to fix it.

Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Link: https://lore.kernel.org/r/20221027140133.1504-1-nicolas.cavallari@green-communications.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mesh_pathtbl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index 30a95a2ff196..78945dc9dcd7 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -794,7 +794,7 @@ int mesh_path_send_to_gates(struct mesh_path *mpath)
 void mesh_path_discard_frame(struct ieee80211_sub_if_data *sdata,
 			     struct sk_buff *skb)
 {
-	kfree_skb(skb);
+	ieee80211_free_txskb(&sdata->local->hw, skb);
 	sdata->u.mesh.mshstats.dropped_frames_no_route++;
 }
 
-- 
2.35.1

[PATCH 4.9 04/62] MIPS: pic32: treat port as signed integer

[Greg Kroah-Hartman]

From: Jason A. Donenfeld <Jason@zx2c4.com>

[ Upstream commit 648060902aa302331b5d6e4f26d8ee0761d239ab ]

get_port_from_cmdline() returns an int, yet is assigned to a char, which
is wrong in its own right, but also, with char becoming unsigned, this
poses problems, because -1 is used as an error value. Further
complicating things, fw_init_early_console() is only ever called with a
-1 argument. Fix this up by removing the unused argument from
fw_init_early_console() and treating port as a proper signed integer.

Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/asm/fw/fw.h             |  2 +-
 arch/mips/pic32/pic32mzda/early_console.c | 13 ++++++-------
 arch/mips/pic32/pic32mzda/init.c          |  2 +-
 3 files changed, 8 insertions(+), 9 deletions(-)

diff --git a/arch/mips/include/asm/fw/fw.h b/arch/mips/include/asm/fw/fw.h
index d0ef8b4892bb..d0494ce4b337 100644
--- a/arch/mips/include/asm/fw/fw.h
+++ b/arch/mips/include/asm/fw/fw.h
@@ -26,6 +26,6 @@ extern char *fw_getcmdline(void);
 extern void fw_meminit(void);
 extern char *fw_getenv(char *name);
 extern unsigned long fw_getenvl(char *name);
-extern void fw_init_early_console(char port);
+extern void fw_init_early_console(void);
 
 #endif /* __ASM_FW_H_ */
diff --git a/arch/mips/pic32/pic32mzda/early_console.c b/arch/mips/pic32/pic32mzda/early_console.c
index d7b783463fac..4933c5337059 100644
--- a/arch/mips/pic32/pic32mzda/early_console.c
+++ b/arch/mips/pic32/pic32mzda/early_console.c
@@ -34,7 +34,7 @@
 #define U_BRG(x)	(UART_BASE(x) + 0x40)
 
 static void __iomem *uart_base;
-static char console_port = -1;
+static int console_port = -1;
 
 static int __init configure_uart_pins(int port)
 {
@@ -54,7 +54,7 @@ static int __init configure_uart_pins(int port)
 	return 0;
 }
 
-static void __init configure_uart(char port, int baud)
+static void __init configure_uart(int port, int baud)
 {
 	u32 pbclk;
 
@@ -67,7 +67,7 @@ static void __init configure_uart(char port, int baud)
 		     uart_base + PIC32_SET(U_STA(port)));
 }
 
-static void __init setup_early_console(char port, int baud)
+static void __init setup_early_console(int port, int baud)
 {
 	if (configure_uart_pins(port))
 		return;
@@ -137,16 +137,15 @@ static int __init get_baud_from_cmdline(char *arch_cmdline)
 	return baud;
 }
 
-void __init fw_init_early_console(char port)
+void __init fw_init_early_console(void)
 {
 	char *arch_cmdline = pic32_getcmdline();
-	int baud = -1;
+	int baud, port;
 
 	uart_base = ioremap_nocache(PIC32_BASE_UART, 0xc00);
 
 	baud = get_baud_from_cmdline(arch_cmdline);
-	if (port == -1)
-		port = get_port_from_cmdline(arch_cmdline);
+	port = get_port_from_cmdline(arch_cmdline);
 
 	if (port == -1)
 		port = EARLY_CONSOLE_PORT;
diff --git a/arch/mips/pic32/pic32mzda/init.c b/arch/mips/pic32/pic32mzda/init.c
index 406c6c5cec29..cf2625551b45 100644
--- a/arch/mips/pic32/pic32mzda/init.c
+++ b/arch/mips/pic32/pic32mzda/init.c
@@ -68,7 +68,7 @@ void __init plat_mem_setup(void)
 		strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
 
 #ifdef CONFIG_EARLY_PRINTK
-	fw_init_early_console(-1);
+	fw_init_early_console();
 #endif
 	pic32_config_init();
 }
-- 
2.35.1

[PATCH 4.9 05/62] af_key: Fix send_acquire race with pfkey_register

[Greg Kroah-Hartman]

From: Herbert Xu <herbert@gondor.apana.org.au>

[ Upstream commit 7f57f8165cb6d2c206e2b9ada53b9e2d6d8af42f ]

The function pfkey_send_acquire may race with pfkey_register
(which could even be in a different name space).  This may result
in a buffer overrun.

Allocating the maximum amount of memory that could be used prevents
this.

Reported-by: syzbot+1e9af9185d8850e2c2fa@syzkaller.appspotmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/key/af_key.c | 32 ++++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 10 deletions(-)

diff --git a/net/key/af_key.c b/net/key/af_key.c
index 88d4a3a02ab7..2bd2ce8ceb80 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -2940,7 +2940,7 @@ static int count_ah_combs(const struct xfrm_tmpl *t)
 			break;
 		if (!aalg->pfkey_supported)
 			continue;
-		if (aalg_tmpl_set(t, aalg) && aalg->available)
+		if (aalg_tmpl_set(t, aalg))
 			sz += sizeof(struct sadb_comb);
 	}
 	return sz + sizeof(struct sadb_prop);
@@ -2958,7 +2958,7 @@ static int count_esp_combs(const struct xfrm_tmpl *t)
 		if (!ealg->pfkey_supported)
 			continue;
 
-		if (!(ealg_tmpl_set(t, ealg) && ealg->available))
+		if (!(ealg_tmpl_set(t, ealg)))
 			continue;
 
 		for (k = 1; ; k++) {
@@ -2969,16 +2969,17 @@ static int count_esp_combs(const struct xfrm_tmpl *t)
 			if (!aalg->pfkey_supported)
 				continue;
 
-			if (aalg_tmpl_set(t, aalg) && aalg->available)
+			if (aalg_tmpl_set(t, aalg))
 				sz += sizeof(struct sadb_comb);
 		}
 	}
 	return sz + sizeof(struct sadb_prop);
 }
 
-static void dump_ah_combs(struct sk_buff *skb, const struct xfrm_tmpl *t)
+static int dump_ah_combs(struct sk_buff *skb, const struct xfrm_tmpl *t)
 {
 	struct sadb_prop *p;
+	int sz = 0;
 	int i;
 
 	p = (struct sadb_prop*)skb_put(skb, sizeof(struct sadb_prop));
@@ -3007,13 +3008,17 @@ static void dump_ah_combs(struct sk_buff *skb, const struct xfrm_tmpl *t)
 			c->sadb_comb_soft_addtime = 20*60*60;
 			c->sadb_comb_hard_usetime = 8*60*60;
 			c->sadb_comb_soft_usetime = 7*60*60;
+			sz += sizeof(*c);
 		}
 	}
+
+	return sz + sizeof(*p);
 }
 
-static void dump_esp_combs(struct sk_buff *skb, const struct xfrm_tmpl *t)
+static int dump_esp_combs(struct sk_buff *skb, const struct xfrm_tmpl *t)
 {
 	struct sadb_prop *p;
+	int sz = 0;
 	int i, k;
 
 	p = (struct sadb_prop*)skb_put(skb, sizeof(struct sadb_prop));
@@ -3055,8 +3060,11 @@ static void dump_esp_combs(struct sk_buff *skb, const struct xfrm_tmpl *t)
 			c->sadb_comb_soft_addtime = 20*60*60;
 			c->sadb_comb_hard_usetime = 8*60*60;
 			c->sadb_comb_soft_usetime = 7*60*60;
+			sz += sizeof(*c);
 		}
 	}
+
+	return sz + sizeof(*p);
 }
 
 static int key_notify_policy_expire(struct xfrm_policy *xp, const struct km_event *c)
@@ -3186,6 +3194,7 @@ static int pfkey_send_acquire(struct xfrm_state *x, struct xfrm_tmpl *t, struct
 	struct sadb_x_sec_ctx *sec_ctx;
 	struct xfrm_sec_ctx *xfrm_ctx;
 	int ctx_size = 0;
+	int alg_size = 0;
 
 	sockaddr_size = pfkey_sockaddr_size(x->props.family);
 	if (!sockaddr_size)
@@ -3197,16 +3206,16 @@ static int pfkey_send_acquire(struct xfrm_state *x, struct xfrm_tmpl *t, struct
 		sizeof(struct sadb_x_policy);
 
 	if (x->id.proto == IPPROTO_AH)
-		size += count_ah_combs(t);
+		alg_size = count_ah_combs(t);
 	else if (x->id.proto == IPPROTO_ESP)
-		size += count_esp_combs(t);
+		alg_size = count_esp_combs(t);
 
 	if ((xfrm_ctx = x->security)) {
 		ctx_size = PFKEY_ALIGN8(xfrm_ctx->ctx_len);
 		size +=  sizeof(struct sadb_x_sec_ctx) + ctx_size;
 	}
 
-	skb =  alloc_skb(size + 16, GFP_ATOMIC);
+	skb =  alloc_skb(size + alg_size + 16, GFP_ATOMIC);
 	if (skb == NULL)
 		return -ENOMEM;
 
@@ -3262,10 +3271,13 @@ static int pfkey_send_acquire(struct xfrm_state *x, struct xfrm_tmpl *t, struct
 	pol->sadb_x_policy_priority = xp->priority;
 
 	/* Set sadb_comb's. */
+	alg_size = 0;
 	if (x->id.proto == IPPROTO_AH)
-		dump_ah_combs(skb, t);
+		alg_size = dump_ah_combs(skb, t);
 	else if (x->id.proto == IPPROTO_ESP)
-		dump_esp_combs(skb, t);
+		alg_size = dump_esp_combs(skb, t);
+
+	hdr->sadb_msg_len += alg_size / 8;
 
 	/* security context */
 	if (xfrm_ctx) {
-- 
2.35.1

[PATCH 4.9 06/62] bus: sunxi-rsb: Support atomic transfers

[Greg Kroah-Hartman]

From: Samuel Holland <samuel@sholland.org>

[ Upstream commit 077686da0e2162c4ea5ae0df205849c2a7a84479 ]

When communicating with a PMIC during system poweroff (pm_power_off()),
IRQs are disabled and we are in a RCU read-side critical section, so we
cannot use wait_for_completion_io_timeout(). Instead, poll the status
register for transfer completion.

Fixes: d787dcdb9c8f ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221114015749.28490-3-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bus/sunxi-rsb.c | 29 +++++++++++++++++++++--------
 1 file changed, 21 insertions(+), 8 deletions(-)

diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c
index ce5b976a8856..bf323b540c03 100644
--- a/drivers/bus/sunxi-rsb.c
+++ b/drivers/bus/sunxi-rsb.c
@@ -268,6 +268,9 @@ EXPORT_SYMBOL_GPL(sunxi_rsb_driver_register);
 /* common code that starts a transfer */
 static int _sunxi_rsb_run_xfer(struct sunxi_rsb *rsb)
 {
+	u32 int_mask, status;
+	bool timeout;
+
 	if (readl(rsb->regs + RSB_CTRL) & RSB_CTRL_START_TRANS) {
 		dev_dbg(rsb->dev, "RSB transfer still in progress\n");
 		return -EBUSY;
@@ -275,13 +278,23 @@ static int _sunxi_rsb_run_xfer(struct sunxi_rsb *rsb)
 
 	reinit_completion(&rsb->complete);
 
-	writel(RSB_INTS_LOAD_BSY | RSB_INTS_TRANS_ERR | RSB_INTS_TRANS_OVER,
-	       rsb->regs + RSB_INTE);
+	int_mask = RSB_INTS_LOAD_BSY | RSB_INTS_TRANS_ERR | RSB_INTS_TRANS_OVER;
+	writel(int_mask, rsb->regs + RSB_INTE);
 	writel(RSB_CTRL_START_TRANS | RSB_CTRL_GLOBAL_INT_ENB,
 	       rsb->regs + RSB_CTRL);
 
-	if (!wait_for_completion_io_timeout(&rsb->complete,
-					    msecs_to_jiffies(100))) {
+	if (irqs_disabled()) {
+		timeout = readl_poll_timeout_atomic(rsb->regs + RSB_INTS,
+						    status, (status & int_mask),
+						    10, 100000);
+		writel(status, rsb->regs + RSB_INTS);
+	} else {
+		timeout = !wait_for_completion_io_timeout(&rsb->complete,
+							  msecs_to_jiffies(100));
+		status = rsb->status;
+	}
+
+	if (timeout) {
 		dev_dbg(rsb->dev, "RSB timeout\n");
 
 		/* abort the transfer */
@@ -293,18 +306,18 @@ static int _sunxi_rsb_run_xfer(struct sunxi_rsb *rsb)
 		return -ETIMEDOUT;
 	}
 
-	if (rsb->status & RSB_INTS_LOAD_BSY) {
+	if (status & RSB_INTS_LOAD_BSY) {
 		dev_dbg(rsb->dev, "RSB busy\n");
 		return -EBUSY;
 	}
 
-	if (rsb->status & RSB_INTS_TRANS_ERR) {
-		if (rsb->status & RSB_INTS_TRANS_ERR_ACK) {
+	if (status & RSB_INTS_TRANS_ERR) {
+		if (status & RSB_INTS_TRANS_ERR_ACK) {
 			dev_dbg(rsb->dev, "RSB slave nack\n");
 			return -EINVAL;
 		}
 
-		if (rsb->status & RSB_INTS_TRANS_ERR_DATA) {
+		if (status & RSB_INTS_TRANS_ERR_DATA) {
 			dev_dbg(rsb->dev, "RSB transfer data error\n");
 			return -EIO;
 		}
-- 
2.35.1

[PATCH 4.9 07/62] ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrl

[Greg Kroah-Hartman]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

[ Upstream commit 40a2226e8bfacb79dd154dea68febeead9d847e9 ]

We set the PIOC to GPIO mode. This way the pin becomes an
input signal will be usable by the controller. Without
this change the udc on the 9g20ek does not work.

Cc: nicolas.ferre@microchip.com
Cc: ludovic.desroches@microchip.com
Cc: alexandre.belloni@bootlin.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: kernel@pengutronix.de
Fixes: 5cb4e73575e3 ("ARM: at91: add at91sam9g20ek boards dt support")
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221114185923.1023249-3-m.grzeschik@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 27847a47c108..1b326a0a2c92 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -39,6 +39,13 @@ pinctrl_pck0_as_mck: pck0_as_mck {
 
 				};
 
+				usb1 {
+					pinctrl_usb1_vbus_gpio: usb1_vbus_gpio {
+						atmel,pins =
+							<AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PC5 GPIO */
+					};
+				};
+
 				mmc0_slot1 {
 					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
 						atmel,pins =
@@ -72,6 +79,8 @@ macb0: ethernet@fffc4000 {
 			};
 
 			usb1: gadget@fffa4000 {
+				pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
+				pinctrl-names = "default";
 				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
-- 
2.35.1

[PATCH 4.9 07/62] ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrl

[Greg Kroah-Hartman]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

[ Upstream commit 40a2226e8bfacb79dd154dea68febeead9d847e9 ]

We set the PIOC to GPIO mode. This way the pin becomes an
input signal will be usable by the controller. Without
this change the udc on the 9g20ek does not work.

Cc: nicolas.ferre@microchip.com
Cc: ludovic.desroches@microchip.com
Cc: alexandre.belloni@bootlin.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: kernel@pengutronix.de
Fixes: 5cb4e73575e3 ("ARM: at91: add at91sam9g20ek boards dt support")
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221114185923.1023249-3-m.grzeschik@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 27847a47c108..1b326a0a2c92 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -39,6 +39,13 @@ pinctrl_pck0_as_mck: pck0_as_mck {
 
 				};
 
+				usb1 {
+					pinctrl_usb1_vbus_gpio: usb1_vbus_gpio {
+						atmel,pins =
+							<AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PC5 GPIO */
+					};
+				};
+
 				mmc0_slot1 {
 					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
 						atmel,pins =
@@ -72,6 +79,8 @@ macb0: ethernet@fffc4000 {
 			};
 
 			usb1: gadget@fffa4000 {
+				pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
+				pinctrl-names = "default";
 				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
-- 
2.35.1




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 4.9 08/62] nfc/nci: fix race with opening and closing

[Greg Kroah-Hartman]

From: Lin Ma <linma@zju.edu.cn>

[ Upstream commit 0ad6bded175e829c2ca261529c9dce39a32a042d ]

Previously we leverage NCI_UNREG and the lock inside nci_close_device to
prevent the race condition between opening a device and closing a
device. However, it still has problem because a failed opening command
will erase the NCI_UNREG flag and allow another opening command to
bypass the status checking.

This fix corrects that by making sure the NCI_UNREG is held.

Reported-by: syzbot+43475bf3cfbd6e41f5b7@syzkaller.appspotmail.com
Fixes: 48b71a9e66c2 ("NFC: add NCI_UNREG flag to eliminate the race")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/nfc/nci/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/nfc/nci/core.c b/net/nfc/nci/core.c
index df90872fcf90..e7701c36f36c 100644
--- a/net/nfc/nci/core.c
+++ b/net/nfc/nci/core.c
@@ -543,7 +543,7 @@ static int nci_open_device(struct nci_dev *ndev)
 		skb_queue_purge(&ndev->tx_q);
 
 		ndev->ops->close(ndev);
-		ndev->flags = 0;
+		ndev->flags &= BIT(NCI_UNREG);
 	}
 
 done:
-- 
2.35.1

[PATCH 4.9 09/62] net: pch_gbe: fix potential memleak in pch_gbe_tx_queue()

[Greg Kroah-Hartman]

From: Wang Hai <wanghai38@huawei.com>

[ Upstream commit 2360f9b8c4e81d242d4cbf99d630a2fffa681fab ]

In pch_gbe_xmit_frame(), NETDEV_TX_OK will be returned whether
pch_gbe_tx_queue() sends data successfully or not, so pch_gbe_tx_queue()
needs to free skb before returning. But pch_gbe_tx_queue() returns without
freeing skb in case of dma_map_single() fails. Add dev_kfree_skb_any()
to fix it.

Fixes: 77555ee72282 ("net: Add Gigabit Ethernet driver of Topcliff PCH")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index cd59577a0c92..ca6c4e7254cd 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -1221,6 +1221,7 @@ static void pch_gbe_tx_queue(struct pch_gbe_adapter *adapter,
 		buffer_info->dma = 0;
 		buffer_info->time_stamp = 0;
 		tx_ring->next_to_use = ring_num;
+		dev_kfree_skb_any(skb);
 		return;
 	}
 	buffer_info->mapped = true;
-- 
2.35.1

[PATCH 4.9 10/62] 9p/fd: fix issue of list_del corruption in p9_fd_cancel()

[Greg Kroah-Hartman]

From: Zhengchao Shao <shaozhengchao@huawei.com>

[ Upstream commit 11c10956515b8ec44cf4f2a7b9d8bf8b9dc05ec4 ]

Syz reported the following issue:
kernel BUG at lib/list_debug.c:53!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
RIP: 0010:__list_del_entry_valid.cold+0x5c/0x72
Call Trace:
<TASK>
p9_fd_cancel+0xb1/0x270
p9_client_rpc+0x8ea/0xba0
p9_client_create+0x9c0/0xed0
v9fs_session_init+0x1e0/0x1620
v9fs_mount+0xba/0xb80
legacy_get_tree+0x103/0x200
vfs_get_tree+0x89/0x2d0
path_mount+0x4c0/0x1ac0
__x64_sys_mount+0x33b/0x430
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>

The process is as follows:
Thread A:                       Thread B:
p9_poll_workfn()                p9_client_create()
...                                 ...
    p9_conn_cancel()                p9_fd_cancel()
        list_del()                      ...
        ...                             list_del()  //list_del
                                                      corruption
There is no lock protection when deleting list in p9_conn_cancel(). After
deleting list in Thread A, thread B will delete the same list again. It
will cause issue of list_del corruption.

Setting req->status to REQ_STATUS_ERROR under lock prevents other
cleanup paths from trying to manipulate req_list.
The other thread can safely check req->status because it still holds a
reference to req at this point.

Link: https://lkml.kernel.org/r/20221110122606.383352-1-shaozhengchao@huawei.com
Fixes: 52f1c45dde91 ("9p: trans_fd/p9_conn_cancel: drop client lock earlier")
Reported-by: syzbot+9b69b8d10ab4a7d88056@syzkaller.appspotmail.com
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
[Dominique: add description of the fix in commit message]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/9p/trans_fd.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index a7973bd56a40..e70e843ee48f 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -210,9 +210,11 @@ static void p9_conn_cancel(struct p9_conn *m, int err)
 
 	list_for_each_entry_safe(req, rtmp, &m->req_list, req_list) {
 		list_move(&req->req_list, &cancel_list);
+		req->status = REQ_STATUS_ERROR;
 	}
 	list_for_each_entry_safe(req, rtmp, &m->unsent_req_list, req_list) {
 		list_move(&req->req_list, &cancel_list);
+		req->status = REQ_STATUS_ERROR;
 	}
 
 	spin_unlock(&m->client->lock);
-- 
2.35.1

[PATCH 4.9 11/62] ARM: mxs: fix memory leak in mxs_machine_init()

[Greg Kroah-Hartman]

From: Zheng Yongjun <zhengyongjun3@huawei.com>

[ Upstream commit f31e3c204d1844b8680a442a48868af5ac3d5481 ]

If of_property_read_string() failed, 'soc_dev_attr' should be
freed before return. Otherwise there is a memory leak.

Fixes: 2046338dcbc6 ("ARM: mxs: Use soc bus infrastructure")
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-mxs/mach-mxs.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index e4f21086b42b..57cb97ff82bc 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -393,8 +393,10 @@ static void __init mxs_machine_init(void)
 
 	root = of_find_node_by_path("/");
 	ret = of_property_read_string(root, "model", &soc_dev_attr->machine);
-	if (ret)
+	if (ret) {
+		kfree(soc_dev_attr);
 		return;
+	}
 
 	soc_dev_attr->family = "Freescale MXS Family";
 	soc_dev_attr->soc_id = mxs_get_soc_id();
-- 
2.35.1

[PATCH 4.9 12/62] net/mlx4: Check retval of mlx4_bitmap_init

[Greg Kroah-Hartman]

From: Peter Kosyh <pkosyh@yandex.ru>

[ Upstream commit 594c61ffc77de0a197934aa0f1df9285c68801c6 ]

If mlx4_bitmap_init fails, mlx4_bitmap_alloc_range will dereference
the NULL pointer (bitmap->table).

Make sure, that mlx4_bitmap_alloc_range called in no error case.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: d57febe1a478 ("net/mlx4: Add A0 hybrid steering")
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Peter Kosyh <pkosyh@yandex.ru>
Link: https://lore.kernel.org/r/20221117152806.278072-1-pkosyh@yandex.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx4/qp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/qp.c b/drivers/net/ethernet/mellanox/mlx4/qp.c
index 71578d48efbc..54026043b5e2 100644
--- a/drivers/net/ethernet/mellanox/mlx4/qp.c
+++ b/drivers/net/ethernet/mellanox/mlx4/qp.c
@@ -696,7 +696,8 @@ static int mlx4_create_zones(struct mlx4_dev *dev,
 			err = mlx4_bitmap_init(*bitmap + k, 1,
 					       MLX4_QP_TABLE_RAW_ETH_SIZE - 1, 0,
 					       0);
-			mlx4_bitmap_alloc_range(*bitmap + k, 1, 1, 0);
+			if (!err)
+				mlx4_bitmap_alloc_range(*bitmap + k, 1, 1, 0);
 		}
 
 		if (err)
-- 
2.35.1

[PATCH 4.9 13/62] net/qla3xxx: fix potential memleak in ql3xxx_send()

[Greg Kroah-Hartman]

From: Zhang Changzhong <zhangchangzhong@huawei.com>

[ Upstream commit 62a7311fb96c61d281da9852dbee4712fc8c3277 ]

The ql3xxx_send() returns NETDEV_TX_OK without freeing skb in error
handling case, add dev_kfree_skb_any() to fix it.

Fixes: bd36b0ac5d06 ("qla3xxx: Add support for Qlogic 4032 chip.")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1668675039-21138-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qla3xxx.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c
index e62e3a9d5249..4ad4fb832a4a 100644
--- a/drivers/net/ethernet/qlogic/qla3xxx.c
+++ b/drivers/net/ethernet/qlogic/qla3xxx.c
@@ -2472,6 +2472,7 @@ static netdev_tx_t ql3xxx_send(struct sk_buff *skb,
 					     skb_shinfo(skb)->nr_frags);
 	if (tx_cb->seg_count == -1) {
 		netdev_err(ndev, "%s: invalid segment count!\n", __func__);
+		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
-- 
2.35.1

[PATCH 4.9 14/62] xfrm: Fix ignored return value in xfrm6_init()

[Greg Kroah-Hartman]

From: Chen Zhongjin <chenzhongjin@huawei.com>

[ Upstream commit 40781bfb836eda57d19c0baa37c7e72590e05fdc ]

When IPv6 module initializing in xfrm6_init(), register_pernet_subsys()
is possible to fail but its return value is ignored.

If IPv6 initialization fails later and xfrm6_fini() is called,
removing uninitialized list in xfrm6_net_ops will cause null-ptr-deref:

KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 330 Comm: insmod
RIP: 0010:unregister_pernet_operations+0xc9/0x450
Call Trace:
 <TASK>
 unregister_pernet_subsys+0x31/0x3e
 xfrm6_fini+0x16/0x30 [ipv6]
 ip6_route_init+0xcd/0x128 [ipv6]
 inet6_init+0x29c/0x602 [ipv6]
 ...

Fix it by catching the error return value of register_pernet_subsys().

Fixes: 8d068875caca ("xfrm: make gc_thresh configurable in all namespaces")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/xfrm6_policy.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index 0c7f27a1725f..6887922ea828 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -419,9 +419,13 @@ int __init xfrm6_init(void)
 	if (ret)
 		goto out_state;
 
-	register_pernet_subsys(&xfrm6_net_ops);
+	ret = register_pernet_subsys(&xfrm6_net_ops);
+	if (ret)
+		goto out_protocol;
 out:
 	return ret;
+out_protocol:
+	xfrm6_protocol_fini();
 out_state:
 	xfrm6_state_fini();
 out_policy:
-- 
2.35.1

[PATCH 4.9 15/62] NFC: nci: fix memory leak in nci_rx_data_packet()

[Greg Kroah-Hartman]

From: Liu Shixin <liushixin2@huawei.com>

[ Upstream commit 53270fb0fd77fe786d8c07a0793981d797836b93 ]

Syzbot reported a memory leak about skb:

unreferenced object 0xffff88810e144e00 (size 240):
  comm "syz-executor284", pid 3701, jiffies 4294952403 (age 12.620s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff83ab79a9>] __alloc_skb+0x1f9/0x270 net/core/skbuff.c:497
    [<ffffffff82a5cf64>] alloc_skb include/linux/skbuff.h:1267 [inline]
    [<ffffffff82a5cf64>] virtual_ncidev_write+0x24/0xe0 drivers/nfc/virtual_ncidev.c:116
    [<ffffffff815f6503>] do_loop_readv_writev fs/read_write.c:759 [inline]
    [<ffffffff815f6503>] do_loop_readv_writev fs/read_write.c:743 [inline]
    [<ffffffff815f6503>] do_iter_write+0x253/0x300 fs/read_write.c:863
    [<ffffffff815f66ed>] vfs_writev+0xdd/0x240 fs/read_write.c:934
    [<ffffffff815f68f6>] do_writev+0xa6/0x1c0 fs/read_write.c:977
    [<ffffffff848802d5>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<ffffffff848802d5>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
    [<ffffffff84a00087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

In nci_rx_data_packet(), if we don't get a valid conn_info, we will return
directly but forget to release the skb.

Reported-by: syzbot+cdb9a427d1bc08815104@syzkaller.appspotmail.com
Fixes: 4aeee6871e8c ("NFC: nci: Add dynamic logical connections support")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20221118082419.239475-1-liushixin2@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/nfc/nci/data.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/nfc/nci/data.c b/net/nfc/nci/data.c
index b8a295dd15d8..45b654dca6f9 100644
--- a/net/nfc/nci/data.c
+++ b/net/nfc/nci/data.c
@@ -291,8 +291,10 @@ void nci_rx_data_packet(struct nci_dev *ndev, struct sk_buff *skb)
 		 nci_plen(skb->data));
 
 	conn_info = nci_get_conn_info_by_conn_id(ndev, nci_conn_id(skb->data));
-	if (!conn_info)
+	if (!conn_info) {
+		kfree_skb(skb);
 		return;
+	}
 
 	/* strip the nci data header */
 	skb_pull(skb, NCI_DATA_HDR_SIZE);
-- 
2.35.1

[PATCH 4.9 16/62] nfc: st-nci: fix incorrect validating logic in EVT_TRANSACTION

[Greg Kroah-Hartman]

From: Martin Faltesek <mfaltesek@google.com>

[ Upstream commit c60c152230828825c06e62a8f1ce956d4b659266 ]

The first validation check for EVT_TRANSACTION has two different checks
tied together with logical AND. One is a check for minimum packet length,
and the other is for a valid aid_tag. If either condition is true (fails),
then an error should be triggered. The fix is to change && to ||.

Reported-by: Denis Efremov <denis.e.efremov@oracle.com>
Reviewed-by: Guenter Roeck <groeck@google.com>
Fixes: 5d1ceb7f5e56 ("NFC: st21nfcb: Add HCI transaction event support")
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nfc/st-nci/se.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/nfc/st-nci/se.c b/drivers/nfc/st-nci/se.c
index 85df2e009310..e75929ff330e 100644
--- a/drivers/nfc/st-nci/se.c
+++ b/drivers/nfc/st-nci/se.c
@@ -338,7 +338,7 @@ static int st_nci_hci_connectivity_event_received(struct nci_dev *ndev,
 		 * AID          81      5 to 16
 		 * PARAMETERS   82      0 to 255
 		 */
-		if (skb->len < NFC_MIN_AID_LENGTH + 2 &&
+		if (skb->len < NFC_MIN_AID_LENGTH + 2 ||
 		    skb->data[0] != NFC_EVT_TRANSACTION_AID_TAG)
 			return -EPROTO;
 
-- 
2.35.1

[PATCH 4.9 17/62] nfc: st-nci: fix memory leaks in EVT_TRANSACTION

[Greg Kroah-Hartman]

From: Martin Faltesek <mfaltesek@google.com>

[ Upstream commit 440f2ae9c9f06e26f5dcea697a53717fc61a318c ]

Error path does not free previously allocated memory. Add devm_kfree() to
the failure path.

Reported-by: Denis Efremov <denis.e.efremov@oracle.com>
Reviewed-by: Guenter Roeck <groeck@google.com>
Fixes: 5d1ceb7f5e56 ("NFC: st21nfcb: Add HCI transaction event support")
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nfc/st-nci/se.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/nfc/st-nci/se.c b/drivers/nfc/st-nci/se.c
index e75929ff330e..b1d23b35aac4 100644
--- a/drivers/nfc/st-nci/se.c
+++ b/drivers/nfc/st-nci/se.c
@@ -352,8 +352,10 @@ static int st_nci_hci_connectivity_event_received(struct nci_dev *ndev,
 
 		/* Check next byte is PARAMETERS tag (82) */
 		if (skb->data[transaction->aid_len + 2] !=
-		    NFC_EVT_TRANSACTION_PARAMS_TAG)
+		    NFC_EVT_TRANSACTION_PARAMS_TAG) {
+			devm_kfree(dev, transaction);
 			return -EPROTO;
+		}
 
 		transaction->params_len = skb->data[transaction->aid_len + 3];
 		memcpy(transaction->params, skb->data +
-- 
2.35.1

[PATCH 4.9 18/62] net: thunderx: Fix the ACPI memory leak

[Greg Kroah-Hartman]

From: Yu Liao <liaoyu15@huawei.com>

[ Upstream commit 661e5ebbafd26d9d2e3c749f5cf591e55c7364f5 ]

The ACPI buffer memory (string.pointer) should be freed as the buffer is
not used after returning from bgx_acpi_match_id(), free it to prevent
memory leak.

Fixes: 46b903a01c05 ("net, thunder, bgx: Add support to get MAC address from ACPI.")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20221123082237.1220521-1-liaoyu15@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
index e858b1af788d..0a58e55f8613 100644
--- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
+++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
@@ -1183,8 +1183,10 @@ static acpi_status bgx_acpi_match_id(acpi_handle handle, u32 lvl,
 		return AE_OK;
 	}
 
-	if (strncmp(string.pointer, bgx_sel, 4))
+	if (strncmp(string.pointer, bgx_sel, 4)) {
+		kfree(string.pointer);
 		return AE_OK;
+	}
 
 	acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
 			    bgx_acpi_register_phy, NULL, bgx, NULL);
-- 
2.35.1

[PATCH 4.9 19/62] s390/crashdump: fix TOD programmable field size

[Greg Kroah-Hartman]

From: Heiko Carstens <hca@linux.ibm.com>

[ Upstream commit f44e07a8afdd713ddc1a8832c39372fe5dd86895 ]

The size of the TOD programmable field was incorrectly increased from
four to eight bytes with commit 1a2c5840acf9 ("s390/dump: cleanup CPU
save area handling").
This leads to an elf notes section NT_S390_TODPREG which has a size of
eight instead of four bytes in case of kdump, however even worse is
that the contents is incorrect: it is supposed to contain only the
contents of the TOD programmable field, but in fact contains a mix of
the TOD programmable field (32 bit upper bits) and parts of the CPU
timer register (lower 32 bits).

Fix this by simply changing the size of the todpreg field within the
save area structure. This will implicitly also fix the size of the
corresponding elf notes sections.

This also gets rid of this compile time warning:

in function ‘fortify_memcpy_chk’,
    inlined from ‘save_area_add_regs’ at arch/s390/kernel/crash_dump.c:99:2:
./include/linux/fortify-string.h:413:25: error: call to ‘__read_overflow2_field’
   declared with attribute warning: detected read beyond size of field
   (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
  413 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: 1a2c5840acf9 ("s390/dump: cleanup CPU save area handling")
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/crash_dump.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/s390/kernel/crash_dump.c
+++ b/arch/s390/kernel/crash_dump.c
@@ -42,7 +42,7 @@ struct save_area {
 	u64 fprs[16];
 	u32 fpc;
 	u32 prefix;
-	u64 todpreg;
+	u32 todpreg;
 	u64 timer;
 	u64 todcmp;
 	u64 vxrs_low[16];

[PATCH 4.9 20/62] iio: light: apds9960: fix wrong register for gesture gain

[Greg Kroah-Hartman]

From: Alejandro Concepción Rodríguez <asconcepcion@acoro.eu>

commit 0aa60ff5d996d4ecdd4a62699c01f6d00f798d59 upstream.

Gesture Gain Control is in REG_GCONF_2 (0xa3), not in REG_CONFIG_2 (0x90).

Fixes: aff268cd532e ("iio: light: add APDS9960 ALS + promixity driver")
Signed-off-by: Alejandro Concepcion-Rodriguez <asconcepcion@acoro.eu>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/EaT-NKC-H4DNX5z4Lg9B6IWPD5TrTrYBr5DYB784wfDKQkTmzPXkoYqyUOrOgJH-xvTsEkFLcVkeAPZRUODEFI5dGziaWXwjpfBNLeNGfNc=@acoro.eu
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/light/apds9960.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/iio/light/apds9960.c
+++ b/drivers/iio/light/apds9960.c
@@ -63,9 +63,6 @@
 #define APDS9960_REG_CONTROL_PGAIN_MASK_SHIFT	2
 
 #define APDS9960_REG_CONFIG_2	0x90
-#define APDS9960_REG_CONFIG_2_GGAIN_MASK	0x60
-#define APDS9960_REG_CONFIG_2_GGAIN_MASK_SHIFT	5
-
 #define APDS9960_REG_ID		0x92
 
 #define APDS9960_REG_STATUS	0x93
@@ -86,6 +83,9 @@
 #define APDS9960_REG_GCONF_1_GFIFO_THRES_MASK_SHIFT	6
 
 #define APDS9960_REG_GCONF_2	0xa3
+#define APDS9960_REG_GCONF_2_GGAIN_MASK			0x60
+#define APDS9960_REG_GCONF_2_GGAIN_MASK_SHIFT		5
+
 #define APDS9960_REG_GOFFSET_U	0xa4
 #define APDS9960_REG_GOFFSET_D	0xa5
 #define APDS9960_REG_GPULSE	0xa6
@@ -404,9 +404,9 @@ static int apds9960_set_pxs_gain(struct
 			}
 
 			ret = regmap_update_bits(data->regmap,
-				APDS9960_REG_CONFIG_2,
-				APDS9960_REG_CONFIG_2_GGAIN_MASK,
-				idx << APDS9960_REG_CONFIG_2_GGAIN_MASK_SHIFT);
+				APDS9960_REG_GCONF_2,
+				APDS9960_REG_GCONF_2_GGAIN_MASK,
+				idx << APDS9960_REG_GCONF_2_GGAIN_MASK_SHIFT);
 			if (!ret)
 				data->pxs_gain = idx;
 			mutex_unlock(&data->lock);

[PATCH 4.9 21/62] iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails

[Greg Kroah-Hartman]

From: Chen Zhongjin <chenzhongjin@huawei.com>

commit 4ad09d956f8eacff61e67e5b13ba8ebec3232f76 upstream.

In iio_register_sw_trigger_type(), configfs_register_default_group() is
possible to fail, but the entry add to iio_trigger_types_list is not
deleted.

This leaves wild in iio_trigger_types_list, which can cause page fault
when module is loading again. So fix this by list_del(&t->list) in error
path.

BUG: unable to handle page fault for address: fffffbfff81d7400
Call Trace:
<TASK>
 iio_register_sw_trigger_type
 do_one_initcall
 do_init_module
 load_module
 ...

Fixes: b662f809d410 ("iio: core: Introduce IIO software triggers")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221108032802.168623-1-chenzhongjin@huawei.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/industrialio-sw-trigger.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/iio/industrialio-sw-trigger.c
+++ b/drivers/iio/industrialio-sw-trigger.c
@@ -61,8 +61,12 @@ int iio_register_sw_trigger_type(struct
 
 	t->group = configfs_register_default_group(iio_triggers_group, t->name,
 						&iio_trigger_type_group_type);
-	if (IS_ERR(t->group))
+	if (IS_ERR(t->group)) {
+		mutex_lock(&iio_trigger_types_lock);
+		list_del(&t->list);
+		mutex_unlock(&iio_trigger_types_lock);
 		ret = PTR_ERR(t->group);
+	}
 
 	return ret;
 }

[PATCH 4.9 22/62] kconfig: display recursive dependency resolution hint just once

[Greg Kroah-Hartman]

From: Masahiro Yamada <yamada.masahiro@socionext.com>

commit e3b03bf29d6b99fab7001fb20c33fe54928c157a upstream.

Commit 1c199f2878f6 ("kbuild: document recursive dependency limitation
/ resolution") probably intended to show a hint along with "recursive
dependency detected!" error, but it missed to add {...} guard, and the
hint is displayed in every loop of the dep_stack traverse, annoyingly.

This error was detected by GCC's -Wmisleading-indentation when switching
to build-time generation of lexer/parser.

scripts/kconfig/symbol.c: In function ‘sym_check_print_recursive’:
scripts/kconfig/symbol.c:1150:3: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
   if (stack->sym == last_sym)
   ^~
scripts/kconfig/symbol.c:1153:4: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
    fprintf(stderr, "For a resolution refer to Documentation/kbuild/kconfig-language.txt\n");
    ^~~~~~~

I could simply add {...} to surround the three fprintf(), but I rather
chose to move the hint after the loop to make the whole message readable.

Fixes: 1c199f2878f6 ("kbuild: document recursive dependency limitation / resolution"
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 scripts/kconfig/symbol.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/scripts/kconfig/symbol.c
+++ b/scripts/kconfig/symbol.c
@@ -1130,8 +1130,7 @@ static void sym_check_print_recursive(st
 		if (stack->sym == last_sym)
 			fprintf(stderr, "%s:%d:error: recursive dependency detected!\n",
 				prop->file->name, prop->lineno);
-			fprintf(stderr, "For a resolution refer to Documentation/kbuild/kconfig-language.txt\n");
-			fprintf(stderr, "subsection \"Kconfig recursive dependency limitations\"\n");
+
 		if (stack->expr) {
 			fprintf(stderr, "%s:%d:\tsymbol %s %s value contains %s\n",
 				prop->file->name, prop->lineno,
@@ -1161,6 +1160,11 @@ static void sym_check_print_recursive(st
 		}
 	}
 
+	fprintf(stderr,
+		"For a resolution refer to Documentation/kbuild/kconfig-language.txt\n"
+		"subsection \"Kconfig recursive dependency limitations\"\n"
+		"\n");
+
 	if (check_top == &cv_stack)
 		dep_stack_remove();
 }

[PATCH 4.9 23/62] nios2: add FORCE for vmlinuz.gz

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 869e4ae4cd2a23d625aaa14ae62dbebf768cb77d ]

Add FORCE to placate a warning from make:

arch/nios2/boot/Makefile:24: FORCE prerequisite is missing

Fixes: 2fc8483fdcde ("nios2: Build infrastructure")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/nios2/boot/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/nios2/boot/Makefile b/arch/nios2/boot/Makefile
index c899876320df..76dce0a438a6 100644
--- a/arch/nios2/boot/Makefile
+++ b/arch/nios2/boot/Makefile
@@ -20,7 +20,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 $(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
-$(obj)/vmImage: $(obj)/vmlinux.gz
+$(obj)/vmImage: $(obj)/vmlinux.gz FORCE
 	$(call if_changed,uimage)
 	@$(kecho) 'Kernel: $@ is ready'
 
-- 
2.35.1

[PATCH 4.9 24/62] nilfs2: fix nilfs_sufile_mark_dirty() not set segment usage as dirty

[Greg Kroah-Hartman]

From: Chen Zhongjin <chenzhongjin@huawei.com>

commit 512c5ca01a3610ab14ff6309db363de51f1c13a6 upstream.

When extending segments, nilfs_sufile_alloc() is called to get an
unassigned segment, then mark it as dirty to avoid accidentally allocating
the same segment in the future.

But for some special cases such as a corrupted image it can be unreliable.
If such corruption of the dirty state of the segment occurs, nilfs2 may
reallocate a segment that is in use and pick the same segment for writing
twice at the same time.

This will cause the problem reported by syzkaller:
https://syzkaller.appspot.com/bug?id=c7c4748e11ffcc367cef04f76e02e931833cbd24

This case started with segbuf1.segnum = 3, nextnum = 4 when constructed.
It supposed segment 4 has already been allocated and marked as dirty.

However the dirty state was corrupted and segment 4 usage was not dirty.
For the first time nilfs_segctor_extend_segments() segment 4 was allocated
again, which made segbuf2 and next segbuf3 had same segment 4.

sb_getblk() will get same bh for segbuf2 and segbuf3, and this bh is added
to both buffer lists of two segbuf.  It makes the lists broken which
causes NULL pointer dereference.

Fix the problem by setting usage as dirty every time in
nilfs_sufile_mark_dirty(), which is called during constructing current
segment to be written out and before allocating next segment.

[chenzhongjin@huawei.com: add lock protection per Ryusuke]
  Link: https://lkml.kernel.org/r/20221121091141.214703-1-chenzhongjin@huawei.com
Link: https://lkml.kernel.org/r/20221118063304.140187-1-chenzhongjin@huawei.com
Fixes: 9ff05123e3bf ("nilfs2: segment constructor")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reported-by: <syzbot+77e4f0...@syzkaller.appspotmail.com>
Reported-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nilfs2/sufile.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/fs/nilfs2/sufile.c
+++ b/fs/nilfs2/sufile.c
@@ -507,14 +507,22 @@ void nilfs_sufile_do_free(struct inode *
 int nilfs_sufile_mark_dirty(struct inode *sufile, __u64 segnum)
 {
 	struct buffer_head *bh;
+	void *kaddr;
+	struct nilfs_segment_usage *su;
 	int ret;
 
+	down_write(&NILFS_MDT(sufile)->mi_sem);
 	ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0, &bh);
 	if (!ret) {
 		mark_buffer_dirty(bh);
 		nilfs_mdt_mark_dirty(sufile);
+		kaddr = kmap_atomic(bh->b_page);
+		su = nilfs_sufile_block_get_segment_usage(sufile, segnum, bh, kaddr);
+		nilfs_segment_usage_set_dirty(su);
+		kunmap_atomic(kaddr);
 		brelse(bh);
 	}
+	up_write(&NILFS_MDT(sufile)->mi_sem);
 	return ret;
 }
 

[PATCH 4.9 25/62] serial: 8250: 8250_omap: Avoid RS485 RTS glitch on ->set_termios()

[Greg Kroah-Hartman]

From: Lukas Wunner <lukas@wunner.de>

[ Upstream commit 038ee49fef18710bedd38b531d173ccd746b2d8d ]

RS485-enabled UART ports on TI Sitara SoCs with active-low polarity
exhibit a Transmit Enable glitch on ->set_termios():

omap8250_restore_regs(), which is called from omap_8250_set_termios(),
sets the TCRTLR bit in the MCR register and clears all other bits,
including RTS.  If RTS uses active-low polarity, it is now asserted
for no reason.

The TCRTLR bit is subsequently cleared by writing up->mcr to the MCR
register.  That variable is always zero, so the RTS bit is still cleared
(incorrectly so if RTS is active-high).

(up->mcr is not, as one might think, a cache of the MCR register's
current value.  Rather, it only caches a single bit of that register,
the AFE bit.  And it only does so if the UART supports the AFE bit,
which OMAP does not.  For details see serial8250_do_set_termios() and
serial8250_do_set_mctrl().)

Finally at the end of omap8250_restore_regs(), the MCR register is
restored (and RTS deasserted) by a call to up->port.ops->set_mctrl()
(which equals serial8250_set_mctrl()) and serial8250_em485_stop_tx().

So there's an RTS glitch between setting TCRTLR and calling
serial8250_em485_stop_tx().  Avoid by using a read-modify-write
when setting TCRTLR.

While at it, drop a redundant initialization of up->mcr.  As explained
above, the variable isn't used by the driver and it is already
initialized to zero because it is part of the static struct
serial8250_ports[] declared in 8250_core.c.  (Static structs are
initialized to zero per section 6.7.8 nr. 10 of the C99 standard.)

Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Su Bao Cheng <baocheng.su@siemens.com>
Tested-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/6554b0241a2c7fd50f32576fdbafed96709e11e8.1664278942.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/8250/8250_omap.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index d5962162c590..b37e6619af9c 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -242,6 +242,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
 {
 	struct omap8250_priv *priv = up->port.private_data;
 	struct uart_8250_dma	*dma = up->dma;
+	u8 mcr = serial8250_in_MCR(up);
 
 	if (dma && dma->tx_running) {
 		/*
@@ -258,7 +259,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
 	serial_out(up, UART_EFR, UART_EFR_ECB);
 
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
-	serial8250_out_MCR(up, UART_MCR_TCRTLR);
+	serial8250_out_MCR(up, mcr | UART_MCR_TCRTLR);
 	serial_out(up, UART_FCR, up->fcr);
 
 	omap8250_update_scr(up, priv);
@@ -274,7 +275,8 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
 	serial_out(up, UART_LCR, 0);
 
 	/* drop TCR + TLR access, we setup XON/XOFF later */
-	serial8250_out_MCR(up, up->mcr);
+	serial8250_out_MCR(up, mcr);
+
 	serial_out(up, UART_IER, up->ier);
 
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
@@ -583,7 +585,6 @@ static int omap_8250_startup(struct uart_port *port)
 
 	pm_runtime_get_sync(port->dev);
 
-	up->mcr = 0;
 	serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
 
 	serial_out(up, UART_LCR, UART_LCR_WLEN8);
-- 
2.35.1

[PATCH 4.9 26/62] xen/platform-pci: add missing free_irq() in error path

[Greg Kroah-Hartman]

From: ruanjinjie <ruanjinjie@huawei.com>

[ Upstream commit c53717e1e3f0d0f9129b2e0dbc6dcc5e0a8132e9 ]

free_irq() is missing in case of error in platform_pci_probe(), fix that.

Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Link: https://lore.kernel.org/r/20221114112124.1965611-1-ruanjinjie@huawei.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/platform-pci.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/xen/platform-pci.c b/drivers/xen/platform-pci.c
index cf9666680c8c..20365b01c36b 100644
--- a/drivers/xen/platform-pci.c
+++ b/drivers/xen/platform-pci.c
@@ -149,7 +149,7 @@ static int platform_pci_probe(struct pci_dev *pdev,
 		if (ret) {
 			dev_warn(&pdev->dev, "Unable to set the evtchn callback "
 					 "err=%d\n", ret);
-			goto out;
+			goto irq_out;
 		}
 	}
 
@@ -157,7 +157,7 @@ static int platform_pci_probe(struct pci_dev *pdev,
 	grant_frames = alloc_xen_mmio(PAGE_SIZE * max_nr_gframes);
 	ret = gnttab_setup_auto_xlat_frames(grant_frames);
 	if (ret)
-		goto out;
+		goto irq_out;
 	ret = gnttab_init();
 	if (ret)
 		goto grant_out;
@@ -165,6 +165,9 @@ static int platform_pci_probe(struct pci_dev *pdev,
 	return 0;
 grant_out:
 	gnttab_free_auto_xlat_frames();
+irq_out:
+	if (!xen_have_vector_callback)
+		free_irq(pdev->irq, pdev);
 out:
 	pci_release_region(pdev, 0);
 mem_out:
-- 
2.35.1

[PATCH 4.9 27/62] platform/x86: asus-wmi: add missing pci_dev_put() in asus_wmi_set_xusb2pr()

[Greg Kroah-Hartman]

From: Xiongfeng Wang <wangxiongfeng2@huawei.com>

[ Upstream commit d0cdd85046b15089df71a50548617ac1025300d0 ]

pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
before asus_wmi_set_xusb2pr() returns.

Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221111100752.134311-1-wangxiongfeng2@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/asus-wmi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 4ae758c3d8ba..9f6e462c57fe 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -1111,6 +1111,8 @@ static void asus_wmi_set_xusb2pr(struct asus_wmi *asus)
 	pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
 				cpu_to_le32(ports_available));
 
+	pci_dev_put(xhci_pdev);
+
 	pr_info("set USB_INTEL_XUSB2PR old: 0x%04x, new: 0x%04x\n",
 			orig_ports_available, ports_available);
 }
-- 
2.35.1

[PATCH 4.9 28/62] tcp: configurable source port perturb table size

[Greg Kroah-Hartman]

From: Gleb Mazovetskiy <glex.spb@gmail.com>

[ Upstream commit aeac4ec8f46d610a10adbaeff5e2edf6a88ffc62 ]

On embedded systems with little memory and no relevant
security concerns, it is beneficial to reduce the size
of the table.

Reducing the size from 2^16 to 2^8 saves 255 KiB
of kernel RAM.

Makes the table size configurable as an expert option.

The size was previously increased from 2^8 to 2^16
in commit 4c2c8f03a5ab ("tcp: increase source port perturb table to
2^16").

Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/Kconfig           | 10 ++++++++++
 net/ipv4/inet_hashtables.c | 10 +++++-----
 2 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 4d265d4a0dbe..29be5bcbe7ac 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -371,6 +371,16 @@ config INET_IPCOMP
 
 	  If unsure, say Y.
 
+config INET_TABLE_PERTURB_ORDER
+	int "INET: Source port perturbation table size (as power of 2)" if EXPERT
+	default 16
+	help
+	  Source port perturbation table size (as power of 2) for
+	  RFC 6056 3.3.4.  Algorithm 4: Double-Hash Port Selection Algorithm.
+
+	  The default is almost always what you want.
+	  Only change this if you know what you are doing.
+
 config INET_XFRM_TUNNEL
 	tristate
 	select INET_TUNNEL
diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index db47e1c407d9..9958850b6cee 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -541,13 +541,13 @@ EXPORT_SYMBOL_GPL(inet_unhash);
  * Note that we use 32bit integers (vs RFC 'short integers')
  * because 2^16 is not a multiple of num_ephemeral and this
  * property might be used by clever attacker.
+ *
  * RFC claims using TABLE_LENGTH=10 buckets gives an improvement, though
- * attacks were since demonstrated, thus we use 65536 instead to really
- * give more isolation and privacy, at the expense of 256kB of kernel
- * memory.
+ * attacks were since demonstrated, thus we use 65536 by default instead
+ * to really give more isolation and privacy, at the expense of 256kB
+ * of kernel memory.
  */
-#define INET_TABLE_PERTURB_SHIFT 16
-#define INET_TABLE_PERTURB_SIZE (1 << INET_TABLE_PERTURB_SHIFT)
+#define INET_TABLE_PERTURB_SIZE (1 << CONFIG_INET_TABLE_PERTURB_ORDER)
 static u32 *table_perturb;
 
 int __inet_hash_connect(struct inet_timewait_death_row *death_row,
-- 
2.35.1

[PATCH 4.9 29/62] net: usb: qmi_wwan: add Telit 0x103a composition

[Greg Kroah-Hartman]

From: Enrico Sau <enrico.sau@gmail.com>

[ Upstream commit e103ba33998d0f25653cc8ebe745b68d1ee10cda ]

Add the following Telit LE910C4-WWX composition:

0x103a: rmnet

Signed-off-by: Enrico Sau <enrico.sau@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20221115105859.14324-1-enrico.sau@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -926,6 +926,7 @@ static const struct usb_device_id produc
 	{QMI_FIXED_INTF(0x2357, 0x0201, 4)},	/* TP-LINK HSUPA Modem MA180 */
 	{QMI_FIXED_INTF(0x2357, 0x9000, 4)},	/* TP-LINK MA260 */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1031, 3)}, /* Telit LE910C1-EUX */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x103a, 0)}, /* Telit LE910C4-WWX */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)},	/* Telit LE922A */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1050, 2)},	/* Telit FN980 */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1060, 2)},	/* Telit LN920 */

[PATCH 4.9 30/62] drm/amdgpu: always register an MMU notifier for userptr

[Greg Kroah-Hartman]

From: Christian König <christian.koenig@amd.com>

commit b39df63b16b64a3af42695acb9bc567aad144776 upstream.

Since switching to HMM we always need that because we no longer grab
references to the pages.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
@@ -278,11 +278,9 @@ int amdgpu_gem_userptr_ioctl(struct drm_
 	if (r)
 		goto release_object;
 
-	if (args->flags & AMDGPU_GEM_USERPTR_REGISTER) {
-		r = amdgpu_mn_register(bo, args->addr);
-		if (r)
-			goto release_object;
-	}
+	r = amdgpu_mn_register(bo, args->addr);
+	if (r)
+		goto release_object;
 
 	if (args->flags & AMDGPU_GEM_USERPTR_VALIDATE) {
 		down_read(&current->mm->mmap_sem);

[PATCH 4.9 31/62] iio: health: afe4403: Fix oob read in afe4403_read_raw

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit 58143c1ed5882c138a3cd2251a336fc8755f23d9 ]

KASAN report out-of-bounds read as follows:

BUG: KASAN: global-out-of-bounds in afe4403_read_raw+0x42e/0x4c0
Read of size 4 at addr ffffffffc02ac638 by task cat/279

Call Trace:
 afe4403_read_raw
 iio_read_channel_info
 dev_attr_show

The buggy address belongs to the variable:
 afe4403_channel_leds+0x18/0xffffffffffffe9e0

This issue can be reproduced by singe command:

 $ cat /sys/bus/spi/devices/spi0.0/iio\:device0/in_intensity6_raw

The array size of afe4403_channel_leds is less than channels, so access
with chan->address cause OOB read in afe4403_read_raw. Fix it by moving
access before use it.

Fixes: b36e8257641a ("iio: health/afe440x: Use regmap fields")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20221107151946.89260-1-weiyongjun@huaweicloud.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/health/afe4403.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/health/afe4403.c b/drivers/iio/health/afe4403.c
index 2f07c4d1398c..4756e9645f7d 100644
--- a/drivers/iio/health/afe4403.c
+++ b/drivers/iio/health/afe4403.c
@@ -253,14 +253,14 @@ static int afe4403_read_raw(struct iio_dev *indio_dev,
 			    int *val, int *val2, long mask)
 {
 	struct afe4403_data *afe = iio_priv(indio_dev);
-	unsigned int reg = afe4403_channel_values[chan->address];
-	unsigned int field = afe4403_channel_leds[chan->address];
+	unsigned int reg, field;
 	int ret;
 
 	switch (chan->type) {
 	case IIO_INTENSITY:
 		switch (mask) {
 		case IIO_CHAN_INFO_RAW:
+			reg = afe4403_channel_values[chan->address];
 			ret = afe4403_read(afe, reg, val);
 			if (ret)
 				return ret;
@@ -270,6 +270,7 @@ static int afe4403_read_raw(struct iio_dev *indio_dev,
 	case IIO_CURRENT:
 		switch (mask) {
 		case IIO_CHAN_INFO_RAW:
+			field = afe4403_channel_leds[chan->address];
 			ret = regmap_field_read(afe->fields[field], val);
 			if (ret)
 				return ret;
-- 
2.35.1

[PATCH 4.9 32/62] iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit fc92d9e3de0b2d30a3ccc08048a5fad533e4672b ]

KASAN report out-of-bounds read as follows:

BUG: KASAN: global-out-of-bounds in afe4404_read_raw+0x2ce/0x380
Read of size 4 at addr ffffffffc00e4658 by task cat/278

Call Trace:
 afe4404_read_raw
 iio_read_channel_info
 dev_attr_show

The buggy address belongs to the variable:
 afe4404_channel_leds+0x18/0xffffffffffffe9c0

This issue can be reproduce by singe command:

 $ cat /sys/bus/i2c/devices/0-0058/iio\:device0/in_intensity6_raw

The array size of afe4404_channel_leds and afe4404_channel_offdacs
are less than channels, so access with chan->address cause OOB read
in afe4404_[read|write]_raw. Fix it by moving access before use them.

Fixes: b36e8257641a ("iio: health/afe440x: Use regmap fields")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20221107152010.95937-1-weiyongjun@huaweicloud.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/health/afe4404.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/health/afe4404.c b/drivers/iio/health/afe4404.c
index 5e256b11ac87..29a906411bd8 100644
--- a/drivers/iio/health/afe4404.c
+++ b/drivers/iio/health/afe4404.c
@@ -258,20 +258,20 @@ static int afe4404_read_raw(struct iio_dev *indio_dev,
 			    int *val, int *val2, long mask)
 {
 	struct afe4404_data *afe = iio_priv(indio_dev);
-	unsigned int value_reg = afe4404_channel_values[chan->address];
-	unsigned int led_field = afe4404_channel_leds[chan->address];
-	unsigned int offdac_field = afe4404_channel_offdacs[chan->address];
+	unsigned int value_reg, led_field, offdac_field;
 	int ret;
 
 	switch (chan->type) {
 	case IIO_INTENSITY:
 		switch (mask) {
 		case IIO_CHAN_INFO_RAW:
+			value_reg = afe4404_channel_values[chan->address];
 			ret = regmap_read(afe->regmap, value_reg, val);
 			if (ret)
 				return ret;
 			return IIO_VAL_INT;
 		case IIO_CHAN_INFO_OFFSET:
+			offdac_field = afe4404_channel_offdacs[chan->address];
 			ret = regmap_field_read(afe->fields[offdac_field], val);
 			if (ret)
 				return ret;
@@ -281,6 +281,7 @@ static int afe4404_read_raw(struct iio_dev *indio_dev,
 	case IIO_CURRENT:
 		switch (mask) {
 		case IIO_CHAN_INFO_RAW:
+			led_field = afe4404_channel_leds[chan->address];
 			ret = regmap_field_read(afe->fields[led_field], val);
 			if (ret)
 				return ret;
@@ -303,19 +304,20 @@ static int afe4404_write_raw(struct iio_dev *indio_dev,
 			     int val, int val2, long mask)
 {
 	struct afe4404_data *afe = iio_priv(indio_dev);
-	unsigned int led_field = afe4404_channel_leds[chan->address];
-	unsigned int offdac_field = afe4404_channel_offdacs[chan->address];
+	unsigned int led_field, offdac_field;
 
 	switch (chan->type) {
 	case IIO_INTENSITY:
 		switch (mask) {
 		case IIO_CHAN_INFO_OFFSET:
+			offdac_field = afe4404_channel_offdacs[chan->address];
 			return regmap_field_write(afe->fields[offdac_field], val);
 		}
 		break;
 	case IIO_CURRENT:
 		switch (mask) {
 		case IIO_CHAN_INFO_RAW:
+			led_field = afe4404_channel_leds[chan->address];
 			return regmap_field_write(afe->fields[led_field], val);
 		}
 		break;
-- 
2.35.1

[PATCH 4.9 33/62] hwmon: (i5500_temp) fix missing pci_disable_device()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 3b7f98f237528c496ea0b689bace0e35eec3e060 ]

pci_disable_device() need be called while module exiting, switch to use
pcim_enable(), pci_disable_device() will be called in pcim_release().

Fixes: ada072816be1 ("hwmon: (i5500_temp) New driver for the Intel 5500/5520/X58 chipsets")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221112125606.3751430-1-yangyingliang@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/i5500_temp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/i5500_temp.c b/drivers/hwmon/i5500_temp.c
index 3e3ccbf18b4e..0064249fcc37 100644
--- a/drivers/hwmon/i5500_temp.c
+++ b/drivers/hwmon/i5500_temp.c
@@ -117,7 +117,7 @@ static int i5500_temp_probe(struct pci_dev *pdev,
 	u32 tstimer;
 	s8 tsfsc;
 
-	err = pci_enable_device(pdev);
+	err = pcim_enable_device(pdev);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to enable device\n");
 		return err;
-- 
2.35.1

[PATCH 4.9 34/62] hwmon: (ibmpex) Fix possible UAF when ibmpex_register_bmc() fails

[Greg Kroah-Hartman]

From: Gaosheng Cui <cuigaosheng1@huawei.com>

[ Upstream commit e2a87785aab0dac190ac89be6a9ba955e2c634f2 ]

Smatch report warning as follows:

drivers/hwmon/ibmpex.c:509 ibmpex_register_bmc() warn:
  '&data->list' not removed from list

If ibmpex_find_sensors() fails in ibmpex_register_bmc(), data will
be freed, but data->list will not be removed from driver_data.bmc_data,
then list traversal may cause UAF.

Fix by removeing it from driver_data.bmc_data before free().

Fixes: 57c7c3a0fdea ("hwmon: IBM power meter driver")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221117034423.2935739-1-cuigaosheng1@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/ibmpex.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hwmon/ibmpex.c b/drivers/hwmon/ibmpex.c
index 21b9c72f16bd..26a898781371 100644
--- a/drivers/hwmon/ibmpex.c
+++ b/drivers/hwmon/ibmpex.c
@@ -517,6 +517,7 @@ static void ibmpex_register_bmc(int iface, struct device *dev)
 	return;
 
 out_register:
+	list_del(&data->list);
 	hwmon_device_unregister(data->hwmon_dev);
 out_user:
 	ipmi_destroy_user(data->user);
-- 
2.35.1

[PATCH 4.9 35/62] net/mlx5: Fix uninitialized variable bug in outlen_write()

[Greg Kroah-Hartman]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 3f5769a074c13d8f08455e40586600419e02a880 ]

If sscanf() return 0, outlen is uninitialized and used in kzalloc(),
this is unexpected. We should return -EINVAL if the string is invalid.

Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
index b6113620cb1a..043eec677b2c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -1293,8 +1293,8 @@ static ssize_t outlen_write(struct file *filp, const char __user *buf,
 		return -EFAULT;
 
 	err = sscanf(outlen_str, "%d", &outlen);
-	if (err < 0)
-		return err;
+	if (err != 1)
+		return -EINVAL;
 
 	ptr = kzalloc(outlen, GFP_KERNEL);
 	if (!ptr)
-- 
2.35.1

[PATCH 4.9 36/62] can: sja1000_isa: sja1000_isa_probe(): add missing free_sja1000dev()

[Greg Kroah-Hartman]

From: Zhang Changzhong <zhangchangzhong@huawei.com>

[ Upstream commit 92dfd9310a71d28cefe6a2d5174d43fab240e631 ]

Add the missing free_sja1000dev() before return from
sja1000_isa_probe() in the register_sja1000dev() error handling case.

In addition, remove blanks before goto labels.

Fixes: 2a6ba39ad6a2 ("can: sja1000: legacy SJA1000 ISA bus driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/all/1668168521-5540-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/sja1000/sja1000_isa.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/can/sja1000/sja1000_isa.c b/drivers/net/can/sja1000/sja1000_isa.c
index e97e6d35b300..5187fdabdca9 100644
--- a/drivers/net/can/sja1000/sja1000_isa.c
+++ b/drivers/net/can/sja1000/sja1000_isa.c
@@ -213,22 +213,24 @@ static int sja1000_isa_probe(struct platform_device *pdev)
 	if (err) {
 		dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
 			DRV_NAME, err);
-		goto exit_unmap;
+		goto exit_free;
 	}
 
 	dev_info(&pdev->dev, "%s device registered (reg_base=0x%p, irq=%d)\n",
 		 DRV_NAME, priv->reg_base, dev->irq);
 	return 0;
 
- exit_unmap:
+exit_free:
+	free_sja1000dev(dev);
+exit_unmap:
 	if (mem[idx])
 		iounmap(base);
- exit_release:
+exit_release:
 	if (mem[idx])
 		release_mem_region(mem[idx], iosize);
 	else
 		release_region(port[idx], iosize);
- exit:
+exit:
 	return err;
 }
 
-- 
2.35.1

[PATCH 4.9 37/62] can: cc770: cc770_isa_probe(): add missing free_cc770dev()

[Greg Kroah-Hartman]

From: Zhang Changzhong <zhangchangzhong@huawei.com>

[ Upstream commit 62ec89e74099a3d6995988ed9f2f996b368417ec ]

Add the missing free_cc770dev() before return from cc770_isa_probe()
in the register_cc770dev() error handling case.

In addition, remove blanks before goto labels.

Fixes: 7e02e5433e00 ("can: cc770: legacy CC770 ISA bus driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/all/1668168557-6024-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/cc770/cc770_isa.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/can/cc770/cc770_isa.c b/drivers/net/can/cc770/cc770_isa.c
index e0d15711e9ac..8df613bc3be3 100644
--- a/drivers/net/can/cc770/cc770_isa.c
+++ b/drivers/net/can/cc770/cc770_isa.c
@@ -272,22 +272,24 @@ static int cc770_isa_probe(struct platform_device *pdev)
 	if (err) {
 		dev_err(&pdev->dev,
 			"couldn't register device (err=%d)\n", err);
-		goto exit_unmap;
+		goto exit_free;
 	}
 
 	dev_info(&pdev->dev, "device registered (reg_base=0x%p, irq=%d)\n",
 		 priv->reg_base, dev->irq);
 	return 0;
 
- exit_unmap:
+exit_free:
+	free_cc770dev(dev);
+exit_unmap:
 	if (mem[idx])
 		iounmap(base);
- exit_release:
+exit_release:
 	if (mem[idx])
 		release_mem_region(mem[idx], iosize);
 	else
 		release_region(port[idx], iosize);
- exit:
+exit:
 	return err;
 }
 
-- 
2.35.1

[PATCH 4.9 38/62] qlcnic: fix sleep-in-atomic-context bugs caused by msleep

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit 8dbd6e4ce1b9c527921643d9e34f188a10d4e893 ]

The watchdog timer is used to monitor whether the process
of transmitting data is timeout. If we use qlcnic driver,
the dev_watchdog() that is the timer handler of watchdog
timer will call qlcnic_tx_timeout() to process the timeout.
But the qlcnic_tx_timeout() calls msleep(), as a result,
the sleep-in-atomic-context bugs will happen. The processes
are shown below:

   (atomic context)
dev_watchdog
  qlcnic_tx_timeout
    qlcnic_83xx_idc_request_reset
      qlcnic_83xx_lock_driver
        msleep

---------------------------

   (atomic context)
dev_watchdog
  qlcnic_tx_timeout
    qlcnic_83xx_idc_request_reset
      qlcnic_83xx_lock_driver
        qlcnic_83xx_recover_driver_lock
          msleep

Fix by changing msleep() to mdelay(), the mdelay() is
busy-waiting and the bugs could be mitigated.

Fixes: 629263acaea3 ("qlcnic: 83xx CNA inter driver communication mechanism")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
index 59b77bb89147..1134060b6962 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
@@ -2992,7 +2992,7 @@ static void qlcnic_83xx_recover_driver_lock(struct qlcnic_adapter *adapter)
 		QLCWRX(adapter->ahw, QLC_83XX_RECOVER_DRV_LOCK, val);
 		dev_info(&adapter->pdev->dev,
 			 "%s: lock recovery initiated\n", __func__);
-		msleep(QLC_83XX_DRV_LOCK_RECOVERY_DELAY);
+		mdelay(QLC_83XX_DRV_LOCK_RECOVERY_DELAY);
 		val = QLCRDX(adapter->ahw, QLC_83XX_RECOVER_DRV_LOCK);
 		id = ((val >> 2) & 0xF);
 		if (id == adapter->portnum) {
@@ -3028,7 +3028,7 @@ int qlcnic_83xx_lock_driver(struct qlcnic_adapter *adapter)
 		if (status)
 			break;
 
-		msleep(QLC_83XX_DRV_LOCK_WAIT_DELAY);
+		mdelay(QLC_83XX_DRV_LOCK_WAIT_DELAY);
 		i++;
 
 		if (i == 1)
-- 
2.35.1

[PATCH 4.9 39/62] net: phy: fix null-ptr-deref while probe() failed

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 369eb2c9f1f72adbe91e0ea8efb130f0a2ba11a6 ]

I got a null-ptr-deref report as following when doing fault injection test:

BUG: kernel NULL pointer dereference, address: 0000000000000058
Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 PID: 253 Comm: 507-spi-dm9051 Tainted: G    B            N 6.1.0-rc3+
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:klist_put+0x2d/0xd0
Call Trace:
 <TASK>
 klist_remove+0xf1/0x1c0
 device_release_driver_internal+0x23e/0x2d0
 bus_remove_device+0x1bd/0x240
 device_del+0x357/0x770
 phy_device_remove+0x11/0x30
 mdiobus_unregister+0xa5/0x140
 release_nodes+0x6a/0xa0
 devres_release_all+0xf8/0x150
 device_unbind_cleanup+0x19/0xd0

//probe path:
phy_device_register()
  device_add()

phy_connect
  phy_attach_direct() //set device driver
    probe() //it's failed, driver is not bound
    device_bind_driver() // probe failed, it's not called

//remove path:
phy_device_remove()
  device_del()
    device_release_driver_internal()
      __device_release_driver() //dev->drv is not NULL
        klist_remove() <- knode_driver is not added yet, cause null-ptr-deref

In phy_attach_direct(), after setting the 'dev->driver', probe() fails,
device_bind_driver() is not called, so the knode_driver->n_klist is not
set, then it causes null-ptr-deref in __device_release_driver() while
deleting device. Fix this by setting dev->driver to NULL in the error
path in phy_attach_direct().

Fixes: e13934563db0 ("[PATCH] PHY Layer fixup")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phy_device.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index a3ba95e96695..90dbf1b2a33a 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -948,6 +948,7 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 
 error_module_put:
 	module_put(d->driver->owner);
+	d->driver = NULL;
 error_put_device:
 	put_device(d);
 	if (ndev_owner != bus->owner)
-- 
2.35.1

[PATCH 4.9 40/62] net: net_netdev: Fix error handling in ntb_netdev_init_module()

[Greg Kroah-Hartman]

From: Yuan Can <yuancan@huawei.com>

[ Upstream commit b8f79dccd38edf7db4911c353d9cd792ab13a327 ]

The ntb_netdev_init_module() returns the ntb_transport_register_client()
directly without checking its return value, if
ntb_transport_register_client() failed, the NTB client device is not
unregistered.

Fix by unregister NTB client device when ntb_transport_register_client()
failed.

Fixes: 548c237c0a99 ("net: Add support for NTB virtual ethernet device")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ntb_netdev.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ntb_netdev.c b/drivers/net/ntb_netdev.c
index 03009f1becdd..bd6c19ceab30 100644
--- a/drivers/net/ntb_netdev.c
+++ b/drivers/net/ntb_netdev.c
@@ -500,7 +500,14 @@ static int __init ntb_netdev_init_module(void)
 	rc = ntb_transport_register_client_dev(KBUILD_MODNAME);
 	if (rc)
 		return rc;
-	return ntb_transport_register_client(&ntb_netdev_client);
+
+	rc = ntb_transport_register_client(&ntb_netdev_client);
+	if (rc) {
+		ntb_transport_unregister_client_dev(KBUILD_MODNAME);
+		return rc;
+	}
+
+	return 0;
 }
 module_init(ntb_netdev_init_module);
 
-- 
2.35.1

[PATCH 4.9 41/62] net/9p: Fix a potential socket leak in p9_socket_open

[Greg Kroah-Hartman]

From: Wang Hai <wanghai38@huawei.com>

[ Upstream commit dcc14cfd7debe11b825cb077e75d91d2575b4cb8 ]

Both p9_fd_create_tcp() and p9_fd_create_unix() will call
p9_socket_open(). If the creation of p9_trans_fd fails,
p9_fd_create_tcp() and p9_fd_create_unix() will return an
error directly instead of releasing the cscoket, which will
result in a socket leak.

This patch adds sock_release() to fix the leak issue.

Fixes: 6b18662e239a ("9p connect fixes")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
ACKed-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/9p/trans_fd.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index e70e843ee48f..7e484f5b140c 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -851,8 +851,10 @@ static int p9_socket_open(struct p9_client *client, struct socket *csocket)
 	struct file *file;
 
 	p = kzalloc(sizeof(struct p9_trans_fd), GFP_KERNEL);
-	if (!p)
+	if (!p) {
+		sock_release(csocket);
 		return -ENOMEM;
+	}
 
 	csocket->sk->sk_allocation = GFP_NOIO;
 	file = sock_alloc_file(csocket, 0, NULL);
-- 
2.35.1

[PATCH 4.9 42/62] net: hsr: Fix potential use-after-free

[Greg Kroah-Hartman]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 7e177d32442b7ed08a9fa61b61724abc548cb248 ]

The skb is delivered to netif_rx() which may free it, after calling this,
dereferencing skb may trigger use-after-free.

Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20221125075724.27912-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/hsr/hsr_forward.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/hsr/hsr_forward.c b/net/hsr/hsr_forward.c
index 04b5450c5a55..adfb49760678 100644
--- a/net/hsr/hsr_forward.c
+++ b/net/hsr/hsr_forward.c
@@ -207,17 +207,18 @@ static void hsr_deliver_master(struct sk_buff *skb, struct net_device *dev,
 			       struct hsr_node *node_src)
 {
 	bool was_multicast_frame;
-	int res;
+	int res, recv_len;
 
 	was_multicast_frame = (skb->pkt_type == PACKET_MULTICAST);
 	hsr_addr_subst_source(node_src, skb);
 	skb_pull(skb, ETH_HLEN);
+	recv_len = skb->len;
 	res = netif_rx(skb);
 	if (res == NET_RX_DROP) {
 		dev->stats.rx_dropped++;
 	} else {
 		dev->stats.rx_packets++;
-		dev->stats.rx_bytes += skb->len;
+		dev->stats.rx_bytes += recv_len;
 		if (was_multicast_frame)
 			dev->stats.multicast++;
 	}
-- 
2.35.1

[PATCH 4.9 43/62] packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE

[Greg Kroah-Hartman]

From: Willem de Bruijn <willemb@google.com>

[ Upstream commit b85f628aa158a653c006e9c1405a117baef8c868 ]

CHECKSUM_COMPLETE signals that skb->csum stores the sum over the
entire packet. It does not imply that an embedded l4 checksum
field has been validated.

Fixes: 682f048bd494 ("af_packet: pass checksum validation status to the user")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20221128161812.640098-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/packet/af_packet.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 2ae2801dd7be..c43a4f9404fe 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -2207,8 +2207,7 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev,
 	if (skb->ip_summed == CHECKSUM_PARTIAL)
 		status |= TP_STATUS_CSUMNOTREADY;
 	else if (skb->pkt_type != PACKET_OUTGOING &&
-		 (skb->ip_summed == CHECKSUM_COMPLETE ||
-		  skb_csum_unnecessary(skb)))
+		 skb_csum_unnecessary(skb))
 		status |= TP_STATUS_CSUM_VALID;
 
 	if (snaplen > res)
@@ -3468,8 +3467,7 @@ static int packet_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
 		if (skb->ip_summed == CHECKSUM_PARTIAL)
 			aux.tp_status |= TP_STATUS_CSUMNOTREADY;
 		else if (skb->pkt_type != PACKET_OUTGOING &&
-			 (skb->ip_summed == CHECKSUM_COMPLETE ||
-			  skb_csum_unnecessary(skb)))
+			 skb_csum_unnecessary(skb))
 			aux.tp_status |= TP_STATUS_CSUM_VALID;
 
 		aux.tp_len = origlen;
-- 
2.35.1

[PATCH 4.9 44/62] net: ethernet: renesas: ravb: Fix promiscuous mode after system resumed

[Greg Kroah-Hartman]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

[ Upstream commit d66233a312ec9013af3e37e4030b479a20811ec3 ]

After system resumed on some environment board, the promiscuous mode
is disabled because the SoC turned off. So, call ravb_set_rx_mode() in
the ravb_resume() to fix the issue.

Reported-by: Tho Vu <tho.vu.wh@renesas.com>
Fixes: 0184165b2f42 ("ravb: add sleep PM suspend/resume support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20221128065604.1864391-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/renesas/ravb_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 5452fe4bf12a..2bebf39fe047 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -2183,6 +2183,7 @@ static int __maybe_unused ravb_resume(struct device *dev)
 		ret = ravb_open(ndev);
 		if (ret < 0)
 			return ret;
+		ravb_set_rx_mode(ndev);
 		netif_device_attach(ndev);
 	}
 
-- 
2.35.1

[PATCH 4.9 45/62] hwmon: (coretemp) Check for null before removing sysfs attrs

[Greg Kroah-Hartman]

From: Phil Auld <pauld@redhat.com>

[ Upstream commit a89ff5f5cc64b9fe7a992cf56988fd36f56ca82a ]

If coretemp_add_core() gets an error then pdata->core_data[indx]
is already NULL and has been kfreed. Don't pass that to
sysfs_remove_group() as that will crash in sysfs_remove_group().

[Shortened for readability]
[91854.020159] sysfs: cannot create duplicate filename '/devices/platform/coretemp.0/hwmon/hwmon2/temp20_label'
<cpu offline>
[91855.126115] BUG: kernel NULL pointer dereference, address: 0000000000000188
[91855.165103] #PF: supervisor read access in kernel mode
[91855.194506] #PF: error_code(0x0000) - not-present page
[91855.224445] PGD 0 P4D 0
[91855.238508] Oops: 0000 [#1] PREEMPT SMP PTI
...
[91855.342716] RIP: 0010:sysfs_remove_group+0xc/0x80
...
[91855.796571] Call Trace:
[91855.810524]  coretemp_cpu_offline+0x12b/0x1dd [coretemp]
[91855.841738]  ? coretemp_cpu_online+0x180/0x180 [coretemp]
[91855.871107]  cpuhp_invoke_callback+0x105/0x4b0
[91855.893432]  cpuhp_thread_fun+0x8e/0x150
...

Fix this by checking for NULL first.

Signed-off-by: Phil Auld <pauld@redhat.com>
Cc: linux-hwmon@vger.kernel.org
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221117162313.3164803-1-pauld@redhat.com
Fixes: 199e0de7f5df3 ("hwmon: (coretemp) Merge pkgtemp with coretemp")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/coretemp.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index be1e380fa1c3..9e81842cff7d 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -557,6 +557,10 @@ static void coretemp_remove_core(struct platform_data *pdata,
 {
 	struct temp_data *tdata = pdata->core_data[indx];
 
+	/* if we errored on add then this is already gone */
+	if (!tdata)
+		return;
+
 	/* Remove the sysfs attributes */
 	sysfs_remove_group(&pdata->hwmon_dev->kobj, &tdata->attr_group);
 
-- 
2.35.1

[PATCH 4.9 46/62] hwmon: (coretemp) fix pci device refcount leak in nv1a_ram_new()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 7dec14537c5906b8bf40fd6fd6d9c3850f8df11d ]

As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put(). So call it after using to avoid refcount leak.

Fixes: 14513ee696a0 ("hwmon: (coretemp) Use PCI host bridge ID to identify CPU if necessary")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221118093303.214163-1-yangyingliang@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/coretemp.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 9e81842cff7d..7e796d68e23a 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -256,10 +256,13 @@ static int adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev)
 	 */
 	if (host_bridge && host_bridge->vendor == PCI_VENDOR_ID_INTEL) {
 		for (i = 0; i < ARRAY_SIZE(tjmax_pci_table); i++) {
-			if (host_bridge->device == tjmax_pci_table[i].device)
+			if (host_bridge->device == tjmax_pci_table[i].device) {
+				pci_dev_put(host_bridge);
 				return tjmax_pci_table[i].tjmax;
+			}
 		}
 	}
+	pci_dev_put(host_bridge);
 
 	for (i = 0; i < ARRAY_SIZE(tjmax_table); i++) {
 		if (strstr(c->x86_model_id, tjmax_table[i].id))
-- 
2.35.1

[PATCH 4.9 47/62] btrfs: qgroup: fix sleep from invalid context bug in btrfs_qgroup_inherit()

[Greg Kroah-Hartman]

From: ChenXiaoSong <chenxiaosong2@huawei.com>

[ Upstream commit f7e942b5bb35d8e3af54053d19a6bf04143a3955 ]

Syzkaller reported BUG as follows:

  BUG: sleeping function called from invalid context at
       include/linux/sched/mm.h:274
  Call Trace:
   <TASK>
   dump_stack_lvl+0xcd/0x134
   __might_resched.cold+0x222/0x26b
   kmem_cache_alloc+0x2e7/0x3c0
   update_qgroup_limit_item+0xe1/0x390
   btrfs_qgroup_inherit+0x147b/0x1ee0
   create_subvol+0x4eb/0x1710
   btrfs_mksubvol+0xfe5/0x13f0
   __btrfs_ioctl_snap_create+0x2b0/0x430
   btrfs_ioctl_snap_create_v2+0x25a/0x520
   btrfs_ioctl+0x2a1c/0x5ce0
   __x64_sys_ioctl+0x193/0x200
   do_syscall_64+0x35/0x80

Fix this by calling qgroup_dirty() on @dstqgroup, and update limit item in
btrfs_run_qgroups() later outside of the spinlock context.

CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/qgroup.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c
index d6795c6fdd66..a13a83ec6202 100644
--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -1990,14 +1990,7 @@ int btrfs_qgroup_inherit(struct btrfs_trans_handle *trans,
 		dstgroup->rsv_rfer = inherit->lim.rsv_rfer;
 		dstgroup->rsv_excl = inherit->lim.rsv_excl;
 
-		ret = update_qgroup_limit_item(trans, quota_root, dstgroup);
-		if (ret) {
-			fs_info->qgroup_flags |= BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT;
-			btrfs_info(fs_info,
-				   "unable to update quota limit for %llu",
-				   dstgroup->qgroupid);
-			goto unlock;
-		}
+		qgroup_dirty(fs_info, dstgroup);
 	}
 
 	if (srcid) {
-- 
2.35.1

[PATCH 4.9 48/62] tools/vm/slabinfo-gnuplot: use "grep -E" instead of "egrep"

[Greg Kroah-Hartman]

From: Tiezhu Yang <yangtiezhu@loongson.cn>

commit a435874bf626f55d7147026b059008c8de89fbb8 upstream.

The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:

	egrep: warning: egrep is obsolescent; using grep -E

fix this up by moving the related file to use "grep -E" instead.

  sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/vm`

Here are the steps to install the latest grep:

  wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
  tar xf grep-3.8.tar.gz
  cd grep-3.8 && ./configure && make
  sudo make install
  export PATH=/usr/local/bin:$PATH

Link: https://lkml.kernel.org/r/1668825419-30584-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/vm/slabinfo-gnuplot.sh |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/tools/vm/slabinfo-gnuplot.sh
+++ b/tools/vm/slabinfo-gnuplot.sh
@@ -157,7 +157,7 @@ do_preprocess()
 	let lines=3
 	out=`basename "$in"`"-slabs-by-loss"
 	`cat "$in" | grep -A "$lines" 'Slabs sorted by loss' |\
-		egrep -iv '\-\-|Name|Slabs'\
+		grep -E -iv '\-\-|Name|Slabs'\
 		| awk '{print $1" "$4+$2*$3" "$4}' > "$out"`
 	if [ $? -eq 0 ]; then
 		do_slabs_plotting "$out"
@@ -166,7 +166,7 @@ do_preprocess()
 	let lines=3
 	out=`basename "$in"`"-slabs-by-size"
 	`cat "$in" | grep -A "$lines" 'Slabs sorted by size' |\
-		egrep -iv '\-\-|Name|Slabs'\
+		grep -E -iv '\-\-|Name|Slabs'\
 		| awk '{print $1" "$4" "$4-$2*$3}' > "$out"`
 	if [ $? -eq 0 ]; then
 		do_slabs_plotting "$out"

[PATCH 4.9 49/62] nilfs2: fix NULL pointer dereference in nilfs_palloc_commit_free_entry()

[Greg Kroah-Hartman]

From: ZhangPeng <zhangpeng362@huawei.com>

commit f0a0ccda18d6fd826d7c7e7ad48a6ed61c20f8b4 upstream.

Syzbot reported a null-ptr-deref bug:

 NILFS (loop0): segctord starting. Construction interval = 5 seconds, CP
 frequency < 30 seconds
 general protection fault, probably for non-canonical address
 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN
 KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
 CPU: 1 PID: 3603 Comm: segctord Not tainted
 6.1.0-rc2-syzkaller-00105-gb229b6ca5abb #0
 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google
 10/11/2022
 RIP: 0010:nilfs_palloc_commit_free_entry+0xe5/0x6b0
 fs/nilfs2/alloc.c:608
 Code: 00 00 00 00 fc ff df 80 3c 02 00 0f 85 cd 05 00 00 48 b8 00 00 00
 00 00 fc ff df 4c 8b 73 08 49 8d 7e 10 48 89 fa 48 c1 ea 03 <80> 3c 02
 00 0f 85 26 05 00 00 49 8b 46 10 be a6 00 00 00 48 c7 c7
 RSP: 0018:ffffc90003dff830 EFLAGS: 00010212
 RAX: dffffc0000000000 RBX: ffff88802594e218 RCX: 000000000000000d
 RDX: 0000000000000002 RSI: 0000000000002000 RDI: 0000000000000010
 RBP: ffff888071880222 R08: 0000000000000005 R09: 000000000000003f
 R10: 000000000000000d R11: 0000000000000000 R12: ffff888071880158
 R13: ffff88802594e220 R14: 0000000000000000 R15: 0000000000000004
 FS:  0000000000000000(0000) GS:ffff8880b9b00000(0000)
 knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007fb1c08316a8 CR3: 0000000018560000 CR4: 0000000000350ee0
 Call Trace:
  <TASK>
  nilfs_dat_commit_free fs/nilfs2/dat.c:114 [inline]
  nilfs_dat_commit_end+0x464/0x5f0 fs/nilfs2/dat.c:193
  nilfs_dat_commit_update+0x26/0x40 fs/nilfs2/dat.c:236
  nilfs_btree_commit_update_v+0x87/0x4a0 fs/nilfs2/btree.c:1940
  nilfs_btree_commit_propagate_v fs/nilfs2/btree.c:2016 [inline]
  nilfs_btree_propagate_v fs/nilfs2/btree.c:2046 [inline]
  nilfs_btree_propagate+0xa00/0xd60 fs/nilfs2/btree.c:2088
  nilfs_bmap_propagate+0x73/0x170 fs/nilfs2/bmap.c:337
  nilfs_collect_file_data+0x45/0xd0 fs/nilfs2/segment.c:568
  nilfs_segctor_apply_buffers+0x14a/0x470 fs/nilfs2/segment.c:1018
  nilfs_segctor_scan_file+0x3f4/0x6f0 fs/nilfs2/segment.c:1067
  nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1197 [inline]
  nilfs_segctor_collect fs/nilfs2/segment.c:1503 [inline]
  nilfs_segctor_do_construct+0x12fc/0x6af0 fs/nilfs2/segment.c:2045
  nilfs_segctor_construct+0x8e3/0xb30 fs/nilfs2/segment.c:2379
  nilfs_segctor_thread_construct fs/nilfs2/segment.c:2487 [inline]
  nilfs_segctor_thread+0x3c3/0xf30 fs/nilfs2/segment.c:2570
  kthread+0x2e4/0x3a0 kernel/kthread.c:376
  ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
  </TASK>
 ...

If DAT metadata file is corrupted on disk, there is a case where
req->pr_desc_bh is NULL and blocknr is 0 at nilfs_dat_commit_end() during
a b-tree operation that cascadingly updates ancestor nodes of the b-tree,
because nilfs_dat_commit_alloc() for a lower level block can initialize
the blocknr on the same DAT entry between nilfs_dat_prepare_end() and
nilfs_dat_commit_end().

If this happens, nilfs_dat_commit_end() calls nilfs_dat_commit_free()
without valid buffer heads in req->pr_desc_bh and req->pr_bitmap_bh, and
causes the NULL pointer dereference above in
nilfs_palloc_commit_free_entry() function, which leads to a crash.

Fix this by adding a NULL check on req->pr_desc_bh and req->pr_bitmap_bh
before nilfs_palloc_commit_free_entry() in nilfs_dat_commit_free().

This also calls nilfs_error() in that case to notify that there is a fatal
flaw in the filesystem metadata and prevent further operations.

Link: https://lkml.kernel.org/r/00000000000097c20205ebaea3d6@google.com
Link: https://lkml.kernel.org/r/20221114040441.1649940-1-zhangpeng362@huawei.com
Link: https://lkml.kernel.org/r/20221119120542.17204-1-konishi.ryusuke@gmail.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+ebe05ee8e98f755f61d0@syzkaller.appspotmail.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nilfs2/dat.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/fs/nilfs2/dat.c
+++ b/fs/nilfs2/dat.c
@@ -120,6 +120,13 @@ static void nilfs_dat_commit_free(struct
 	kunmap_atomic(kaddr);
 
 	nilfs_dat_commit_entry(dat, req);
+
+	if (unlikely(req->pr_desc_bh == NULL || req->pr_bitmap_bh == NULL)) {
+		nilfs_error(dat->i_sb,
+			    "state inconsistency probably due to duplicate use of vblocknr = %llu",
+			    (unsigned long long)req->pr_entry_nr);
+		return;
+	}
 	nilfs_palloc_commit_free_entry(dat, req);
 }
 

[PATCH 4.9 50/62] arm64: Fix panic() when Spectre-v2 causes Spectre-BHB to re-allocate KVM vectors

[Greg Kroah-Hartman]

From: James Morse <james.morse@arm.com>

Sami reports that linux panic()s when resuming from suspend to RAM. This
is because when CPUs are brought back online, they re-enable any
necessary mitigations.

The Spectre-v2 and Spectre-BHB mitigations interact as both need to
done by KVM when exiting a guest. Slots KVM can use as vectors are
allocated, and templates for the mitigation are patched into the vector.

This fails if a new slot needs to be allocated once the kernel has finished
booting as it is no-longer possible to modify KVM's vectors:
| root@adam:/sys/devices/system/cpu/cpu1# echo 1 > online
| Unable to handle kernel write to read-only memory at virtual add>
| Mem abort info:
|   ESR = 0x9600004e
|   Exception class = DABT (current EL), IL = 32 bits
|   SET = 0, FnV = 0
|   EA = 0, S1PTW = 0
| Data abort info:
|   ISV = 0, ISS = 0x0000004e
|   CM = 0, WnR = 1
| swapper pgtable: 4k pages, 48-bit VAs, pgdp = 000000000f07a71c
| [ffff800000b4b800] pgd=00000009ffff8803, pud=00000009ffff7803, p>
| Internal error: Oops: 9600004e [#1] PREEMPT SMP
| Modules linked in:
| Process swapper/1 (pid: 0, stack limit = 0x0000000063153c53)
| CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.19.252-dirty #14
| Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno De>
| pstate: 000001c5 (nzcv dAIF -PAN -UAO)
| pc : __memcpy+0x48/0x180
| lr : __copy_hyp_vect_bpi+0x64/0x90

| Call trace:
|  __memcpy+0x48/0x180
|  kvm_setup_bhb_slot+0x204/0x2a8
|  spectre_bhb_enable_mitigation+0x1b8/0x1d0
|  __verify_local_cpu_caps+0x54/0xf0
|  check_local_cpu_capabilities+0xc4/0x184
|  secondary_start_kernel+0xb0/0x170
| Code: b8404423 b80044c3 36180064 f8408423 (f80084c3)
| ---[ end trace 859bcacb09555348 ]---
| Kernel panic - not syncing: Attempted to kill the idle task!
| SMP: stopping secondary CPUs
| Kernel Offset: disabled
| CPU features: 0x10,25806086
| Memory Limit: none
| ---[ end Kernel panic - not syncing: Attempted to kill the idle ]

This is only a problem on platforms where there is only one CPU that is
vulnerable to both Spectre-v2 and Spectre-BHB.

The Spectre-v2 mitigation identifies the slot it can re-use by the CPU's
'fn'. It unconditionally writes the slot number and 'template_start'
pointer. The Spectre-BHB mitigation identifies slots it can re-use by
the CPU's template_start pointer, which was previously clobbered by the
Spectre-v2 mitigation.

When there is only one CPU that is vulnerable to both issues, this causes
Spectre-v2 to try to allocate a new slot, which fails.

Change both mitigations to check whether they are changing the slot this
CPU uses before writing the percpu variables again.

This issue only exists in the stable backports for Spectre-BHB which have
to use totally different infrastructure to mainline.

Reported-by: Sami Lee <sami.lee@mediatek.com>
Fixes: 4dd8aae585a5 ("arm64: Mitigate spectre style branch history side channels")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kernel/cpu_errata.c |   17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -125,10 +125,12 @@ static void __install_bp_hardening_cb(bp
 		__copy_hyp_vect_bpi(slot, hyp_vecs_start, hyp_vecs_end);
 	}
 
-	__this_cpu_write(bp_hardening_data.hyp_vectors_slot, slot);
-	__this_cpu_write(bp_hardening_data.fn, fn);
-	__this_cpu_write(bp_hardening_data.template_start, hyp_vecs_start);
-	__hardenbp_enab = true;
+	if (fn != __this_cpu_read(bp_hardening_data.fn)) {
+		__this_cpu_write(bp_hardening_data.hyp_vectors_slot, slot);
+		__this_cpu_write(bp_hardening_data.fn, fn);
+		__this_cpu_write(bp_hardening_data.template_start, hyp_vecs_start);
+		__hardenbp_enab = true;
+	}
 	spin_unlock(&bp_lock);
 }
 #else
@@ -828,8 +830,11 @@ static void kvm_setup_bhb_slot(const cha
 		__copy_hyp_vect_bpi(slot, hyp_vecs_start, hyp_vecs_end);
 	}
 
-	__this_cpu_write(bp_hardening_data.hyp_vectors_slot, slot);
-	__this_cpu_write(bp_hardening_data.template_start, hyp_vecs_start);
+	if (hyp_vecs_start != __this_cpu_read(bp_hardening_data.template_start)) {
+		__this_cpu_write(bp_hardening_data.hyp_vectors_slot, slot);
+		__this_cpu_write(bp_hardening_data.template_start,
+				 hyp_vecs_start);
+	}
 	spin_unlock(&bp_lock);
 }
 #else

[PATCH 4.9 51/62] arm64: errata: Fix KVM Spectre-v2 mitigation selection for Cortex-A57/A72

[Greg Kroah-Hartman]

From: James Morse <james.morse@arm.com>

Both the Spectre-v2 and Spectre-BHB mitigations involve running a sequence
immediately after exiting a guest, before any branches. In the stable
kernels these sequences are built by copying templates into an empty vector
slot.

For Spectre-BHB, Cortex-A57 and A72 require the branchy loop with k=8.
If Spectre-v2 needs mitigating at the same time, a firmware call to EL3 is
needed. The work EL3 does at this point is also enough to mitigate
Spectre-BHB.

When enabling the Spectre-BHB mitigation, spectre_bhb_enable_mitigation()
should check if a slot has already been allocated for Spectre-v2, meaning
no work is needed for Spectre-BHB.

This check was missed in the earlier backport, add it.

Fixes: 4dd8aae585a5 ("arm64: Mitigate spectre style branch history side channels")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kernel/cpu_errata.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -876,7 +876,13 @@ void spectre_bhb_enable_mitigation(const
 	} else if (spectre_bhb_loop_affected(SCOPE_LOCAL_CPU)) {
 		switch (spectre_bhb_loop_affected(SCOPE_SYSTEM)) {
 		case 8:
-			kvm_setup_bhb_slot(__spectre_bhb_loop_k8_start);
+			/*
+			 * A57/A72-r0 will already have selected the
+			 * spectre-indirect vector, which is sufficient
+			 * for BHB too.
+			 */
+			if (!__this_cpu_read(bp_hardening_data.fn))
+				kvm_setup_bhb_slot(__spectre_bhb_loop_k8_start);
 			break;
 		case 24:
 			kvm_setup_bhb_slot(__spectre_bhb_loop_k24_start);

[PATCH 4.9 52/62] ASoC: ops: Fix bounds check for _sx controls

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 698813ba8c580efb356ace8dbf55f61dac6063a8 ]

For _sx controls the semantics of the max field is not the usual one, max
is the number of steps rather than the maximum value. This means that our
check in snd_soc_put_volsw_sx() needs to just check against the maximum
value.

Fixes: 4f1e50d6a9cf9c1b ("ASoC: ops: Reject out of bounds values in snd_soc_put_volsw_sx()")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220511134137.169575-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-ops.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/soc-ops.c b/sound/soc/soc-ops.c
index 4fda8c24be29..5479927391d4 100644
--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -450,7 +450,7 @@ int snd_soc_put_volsw_sx(struct snd_kcontrol *kcontrol,
 	val = ucontrol->value.integer.value[0];
 	if (mc->platform_max && val > mc->platform_max)
 		return -EINVAL;
-	if (val > max - min)
+	if (val > max)
 		return -EINVAL;
 	if (val < 0)
 		return -EINVAL;
-- 
2.35.1

[PATCH 4.9 53/62] pinctrl: single: Fix potential division by zero

[Greg Kroah-Hartman]

From: Maxim Korotkov <korotkov.maxim.s@gmail.com>

[ Upstream commit 64c150339e7f6c5cbbe8c17a56ef2b3902612798 ]

There is a possibility of dividing by zero due to the pcs->bits_per_pin
if pcs->fmask() also has a value of zero and called fls
from asm-generic/bitops/builtin-fls.h or arch/x86/include/asm/bitops.h.
The function pcs_probe() has the branch that assigned to fmask 0 before
pcs_allocate_pin_table() was called

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 4e7e8017a80e ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules")
Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221117123034.27383-1-korotkov.maxim.s@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-single.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index 01f42090cd03..d2180bf2da95 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -812,7 +812,7 @@ static int pcs_allocate_pin_table(struct pcs_device *pcs)
 
 	mux_bytes = pcs->width / BITS_PER_BYTE;
 
-	if (pcs->bits_per_mux) {
+	if (pcs->bits_per_mux && pcs->fmask) {
 		pcs->bits_per_pin = fls(pcs->fmask);
 		nr_pins = (pcs->size * BITS_PER_BYTE) / pcs->bits_per_pin;
 		num_pins_in_register = pcs->width / pcs->bits_per_pin;
-- 
2.35.1

[PATCH 4.9 54/62] iommu/vt-d: Fix PCI device refcount leak in dmar_dev_scope_init()

[Greg Kroah-Hartman]

From: Xiongfeng Wang <wangxiongfeng2@huawei.com>

[ Upstream commit 4bedbbd782ebbe7287231fea862c158d4f08a9e3 ]

for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.

If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. Add the missing
pci_dev_put() for the error path to avoid reference count leak.

Fixes: 2e4552893038 ("iommu/vt-d: Unify the way to process DMAR device scope array")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221121113649.190393-3-wangxiongfeng2@huawei.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/dmar.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/iommu/dmar.c b/drivers/iommu/dmar.c
index d8b8cf36de31..fb03616f9ade 100644
--- a/drivers/iommu/dmar.c
+++ b/drivers/iommu/dmar.c
@@ -803,6 +803,7 @@ int __init dmar_dev_scope_init(void)
 			info = dmar_alloc_pci_notify_info(dev,
 					BUS_NOTIFY_ADD_DEVICE);
 			if (!info) {
+				pci_dev_put(dev);
 				return dmar_dev_scope_status;
 			} else {
 				dmar_pci_bus_add_dev(info);
-- 
2.35.1

[PATCH 4.9 55/62] tcp/udp: Fix memory leak in ipv6_renew_options().

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

commit 3c52c6bb831f6335c176a0fc7214e26f43adbd11 upstream.

syzbot reported a memory leak [0] related to IPV6_ADDRFORM.

The scenario is that while one thread is converting an IPv6 socket into
IPv4 with IPV6_ADDRFORM, another thread calls do_ipv6_setsockopt() and
allocates memory to inet6_sk(sk)->XXX after conversion.

Then, the converted sk with (tcp|udp)_prot never frees the IPv6 resources,
which inet6_destroy_sock() should have cleaned up.

setsockopt(IPV6_ADDRFORM)                 setsockopt(IPV6_DSTOPTS)
+-----------------------+                 +----------------------+
- do_ipv6_setsockopt(sk, ...)
  - sockopt_lock_sock(sk)                 - do_ipv6_setsockopt(sk, ...)
    - lock_sock(sk)                         ^._ called via tcpv6_prot
  - WRITE_ONCE(sk->sk_prot, &tcp_prot)          before WRITE_ONCE()
  - xchg(&np->opt, NULL)
  - txopt_put(opt)
  - sockopt_release_sock(sk)
    - release_sock(sk)                      - sockopt_lock_sock(sk)
                                              - lock_sock(sk)
                                            - ipv6_set_opt_hdr(sk, ...)
                                              - ipv6_update_options(sk, opt)
                                                - xchg(&inet6_sk(sk)->opt, opt)
                                                  ^._ opt is never freed.

                                            - sockopt_release_sock(sk)
                                              - release_sock(sk)

Since IPV6_DSTOPTS allocates options under lock_sock(), we can avoid this
memory leak by testing whether sk_family is changed by IPV6_ADDRFORM after
acquiring the lock.

This issue exists from the initial commit between IPV6_ADDRFORM and
IPV6_PKTOPTIONS.

[0]:
BUG: memory leak
unreferenced object 0xffff888009ab9f80 (size 96):
  comm "syz-executor583", pid 328, jiffies 4294916198 (age 13.034s)
  hex dump (first 32 bytes):
    01 00 00 00 48 00 00 00 08 00 00 00 00 00 00 00  ....H...........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000002ee98ae1>] kmalloc include/linux/slab.h:605 [inline]
    [<000000002ee98ae1>] sock_kmalloc+0xb3/0x100 net/core/sock.c:2566
    [<0000000065d7b698>] ipv6_renew_options+0x21e/0x10b0 net/ipv6/exthdrs.c:1318
    [<00000000a8c756d7>] ipv6_set_opt_hdr net/ipv6/ipv6_sockglue.c:354 [inline]
    [<00000000a8c756d7>] do_ipv6_setsockopt.constprop.0+0x28b7/0x4350 net/ipv6/ipv6_sockglue.c:668
    [<000000002854d204>] ipv6_setsockopt+0xdf/0x190 net/ipv6/ipv6_sockglue.c:1021
    [<00000000e69fdcf8>] tcp_setsockopt+0x13b/0x2620 net/ipv4/tcp.c:3789
    [<0000000090da4b9b>] __sys_setsockopt+0x239/0x620 net/socket.c:2252
    [<00000000b10d192f>] __do_sys_setsockopt net/socket.c:2263 [inline]
    [<00000000b10d192f>] __se_sys_setsockopt net/socket.c:2260 [inline]
    [<00000000b10d192f>] __x64_sys_setsockopt+0xbe/0x160 net/socket.c:2260
    [<000000000a80d7aa>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<000000000a80d7aa>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
    [<000000004562b5c6>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ipv6_sockglue.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -165,6 +165,12 @@ static int do_ipv6_setsockopt(struct soc
 		rtnl_lock();
 	lock_sock(sk);
 
+	/* Another thread has converted the socket into IPv4 with
+	 * IPV6_ADDRFORM concurrently.
+	 */
+	if (unlikely(sk->sk_family != AF_INET6))
+		goto unlock;
+
 	switch (optname) {
 
 	case IPV6_ADDRFORM:
@@ -897,6 +903,7 @@ pref_skip_coa:
 		break;
 	}
 
+unlock:
 	release_sock(sk);
 	if (needs_rtnl)
 		rtnl_unlock();

[PATCH 4.9 56/62] Revert "fbdev: fb_pm2fb: Avoid potential divide by zero error"

[Greg Kroah-Hartman]

From: Ulrich Hecht <uli+cip@fpond.eu>

This reverts commit 6577e903a9e193ad70f2db92eba57c4f335afd1a. It's a
duplicate of a commit that is already in this tree
(0f1174f4972ea9fad6becf8881d71adca8e9ca91).

Signed-off-by: Ulrich Hecht <uli+cip@fpond.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/fbdev/pm2fb.c |    5 -----
 1 file changed, 5 deletions(-)

--- a/drivers/video/fbdev/pm2fb.c
+++ b/drivers/video/fbdev/pm2fb.c
@@ -619,11 +619,6 @@ static int pm2fb_check_var(struct fb_var
 		return -EINVAL;
 	}
 
-	if (!var->pixclock) {
-		DPRINTK("pixclock is zero\n");
-		return -EINVAL;
-	}
-
 	if (PICOS2KHZ(var->pixclock) > PM2_MAX_PIXCLOCK) {
 		DPRINTK("pixclock too high (%ldKHz)\n",
 			PICOS2KHZ(var->pixclock));

[PATCH 4.9 57/62] x86/tsx: Add a feature bit for TSX control MSR support

[Greg Kroah-Hartman]

From: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>

commit aaa65d17eec372c6a9756833f3964ba05b05ea14 upstream.

Support for the TSX control MSR is enumerated in MSR_IA32_ARCH_CAPABILITIES.
This is different from how other CPU features are enumerated i.e. via
CPUID. Currently, a call to tsx_ctrl_is_supported() is required for
enumerating the feature. In the absence of a feature bit for TSX control,
any code that relies on checking feature bits directly will not work.

In preparation for adding a feature bit check in MSR save/restore
during suspend/resume, set a new feature bit X86_FEATURE_TSX_CTRL when
MSR_IA32_TSX_CTRL is present.

  [ bp: Remove tsx_ctrl_is_supported()]

  [Pawan: Resolved conflicts in backport; Removed parts of commit message
          referring to removed function tsx_ctrl_is_supported()]

Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/de619764e1d98afbb7a5fa58424f1278ede37b45.1668539735.git.pawan.kumar.gupta@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/include/asm/cpufeatures.h |    1 +
 arch/x86/kernel/cpu/tsx.c          |   33 ++++++++++++++-------------------
 2 files changed, 15 insertions(+), 19 deletions(-)

--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -196,6 +196,7 @@
 #define X86_FEATURE_FENCE_SWAPGS_KERNEL	( 7*32+11) /* "" LFENCE in kernel entry SWAPGS path */
 #define X86_FEATURE_RETPOLINE	( 7*32+12) /* "" Generic Retpoline mitigation for Spectre variant 2 */
 #define X86_FEATURE_RETPOLINE_LFENCE	( 7*32+13) /* "" Use LFENCE for Spectre variant 2 */
+#define X86_FEATURE_MSR_TSX_CTRL	( 7*32+14) /* "" MSR IA32_TSX_CTRL (Intel) implemented */
 
 #define X86_FEATURE_MSR_SPEC_CTRL ( 7*32+16) /* "" MSR SPEC_CTRL is implemented */
 #define X86_FEATURE_SSBD	( 7*32+17) /* Speculative Store Bypass Disable */
--- a/arch/x86/kernel/cpu/tsx.c
+++ b/arch/x86/kernel/cpu/tsx.c
@@ -55,24 +55,6 @@ void tsx_enable(void)
 	wrmsrl(MSR_IA32_TSX_CTRL, tsx);
 }
 
-static bool __init tsx_ctrl_is_supported(void)
-{
-	u64 ia32_cap = x86_read_arch_cap_msr();
-
-	/*
-	 * TSX is controlled via MSR_IA32_TSX_CTRL.  However, support for this
-	 * MSR is enumerated by ARCH_CAP_TSX_MSR bit in MSR_IA32_ARCH_CAPABILITIES.
-	 *
-	 * TSX control (aka MSR_IA32_TSX_CTRL) is only available after a
-	 * microcode update on CPUs that have their MSR_IA32_ARCH_CAPABILITIES
-	 * bit MDS_NO=1. CPUs with MDS_NO=0 are not planned to get
-	 * MSR_IA32_TSX_CTRL support even after a microcode update. Thus,
-	 * tsx= cmdline requests will do nothing on CPUs without
-	 * MSR_IA32_TSX_CTRL support.
-	 */
-	return !!(ia32_cap & ARCH_CAP_TSX_CTRL_MSR);
-}
-
 static enum tsx_ctrl_states x86_get_tsx_auto_mode(void)
 {
 	if (boot_cpu_has_bug(X86_BUG_TAA))
@@ -86,9 +68,22 @@ void __init tsx_init(void)
 	char arg[5] = {};
 	int ret;
 
-	if (!tsx_ctrl_is_supported())
+	/*
+	 * TSX is controlled via MSR_IA32_TSX_CTRL.  However, support for this
+	 * MSR is enumerated by ARCH_CAP_TSX_MSR bit in MSR_IA32_ARCH_CAPABILITIES.
+	 *
+	 * TSX control (aka MSR_IA32_TSX_CTRL) is only available after a
+	 * microcode update on CPUs that have their MSR_IA32_ARCH_CAPABILITIES
+	 * bit MDS_NO=1. CPUs with MDS_NO=0 are not planned to get
+	 * MSR_IA32_TSX_CTRL support even after a microcode update. Thus,
+	 * tsx= cmdline requests will do nothing on CPUs without
+	 * MSR_IA32_TSX_CTRL support.
+	 */
+	if (!(x86_read_arch_cap_msr() & ARCH_CAP_TSX_CTRL_MSR))
 		return;
 
+	setup_force_cpu_cap(X86_FEATURE_MSR_TSX_CTRL);
+
 	ret = cmdline_find_option(boot_command_line, "tsx", arg, sizeof(arg));
 	if (ret >= 0) {
 		if (!strcmp(arg, "on")) {

[PATCH 4.9 58/62] x86/pm: Add enumeration check before spec MSRs save/restore setup

[Greg Kroah-Hartman]

From: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>

commit 50bcceb7724e471d9b591803889df45dcbb584bc upstream.

pm_save_spec_msr() keeps a list of all the MSRs which _might_ need
to be saved and restored at hibernate and resume. However, it has
zero awareness of CPU support for these MSRs. It mostly works by
unconditionally attempting to manipulate these MSRs and relying on
rdmsrl_safe() being able to handle a #GP on CPUs where the support is
unavailable.

However, it's possible for reads (RDMSR) to be supported for a given MSR
while writes (WRMSR) are not. In this case, msr_build_context() sees
a successful read (RDMSR) and marks the MSR as valid. Then, later, a
write (WRMSR) fails, producing a nasty (but harmless) error message.
This causes restore_processor_state() to try and restore it, but writing
this MSR is not allowed on the Intel Atom N2600 leading to:

  unchecked MSR access error: WRMSR to 0x122 (tried to write 0x0000000000000002) \
     at rIP: 0xffffffff8b07a574 (native_write_msr+0x4/0x20)
  Call Trace:
   <TASK>
   restore_processor_state
   x86_acpi_suspend_lowlevel
   acpi_suspend_enter
   suspend_devices_and_enter
   pm_suspend.cold
   state_store
   kernfs_fop_write_iter
   vfs_write
   ksys_write
   do_syscall_64
   ? do_syscall_64
   ? up_read
   ? lock_is_held_type
   ? asm_exc_page_fault
   ? lockdep_hardirqs_on
   entry_SYSCALL_64_after_hwframe

To fix this, add the corresponding X86_FEATURE bit for each MSR.  Avoid
trying to manipulate the MSR when the feature bit is clear. This
required adding a X86_FEATURE bit for MSRs that do not have one already,
but it's a small price to pay.

  [ bp: Move struct msr_enumeration inside the only function that uses it. ]
  [Pawan: Resolve build issue in backport]

Fixes: 73924ec4d560 ("x86/pm: Save the MSR validity status at context setup")
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/c24db75d69df6e66c0465e13676ad3f2837a2ed8.1668539735.git.pawan.kumar.gupta@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/power/cpu.c |   23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -520,16 +520,23 @@ static int pm_cpu_check(const struct x86
 
 static void pm_save_spec_msr(void)
 {
-	u32 spec_msr_id[] = {
-		MSR_IA32_SPEC_CTRL,
-		MSR_IA32_TSX_CTRL,
-		MSR_TSX_FORCE_ABORT,
-		MSR_IA32_MCU_OPT_CTRL,
-		MSR_AMD64_LS_CFG,
-		MSR_AMD64_DE_CFG,
+	struct msr_enumeration {
+		u32 msr_no;
+		u32 feature;
+	} msr_enum[] = {
+		{ MSR_IA32_SPEC_CTRL,	 X86_FEATURE_MSR_SPEC_CTRL },
+		{ MSR_IA32_TSX_CTRL,	 X86_FEATURE_MSR_TSX_CTRL },
+		{ MSR_TSX_FORCE_ABORT,	 X86_FEATURE_TSX_FORCE_ABORT },
+		{ MSR_IA32_MCU_OPT_CTRL, X86_FEATURE_SRBDS_CTRL },
+		{ MSR_AMD64_LS_CFG,	 X86_FEATURE_LS_CFG_SSBD },
+		{ MSR_AMD64_DE_CFG,	 X86_FEATURE_LFENCE_RDTSC },
 	};
+	int i;
 
-	msr_build_context(spec_msr_id, ARRAY_SIZE(spec_msr_id));
+	for (i = 0; i < ARRAY_SIZE(msr_enum); i++) {
+		if (boot_cpu_has(msr_enum[i].feature))
+			msr_build_context(&msr_enum[i].msr_no, 1);
+	}
 }
 
 static int pm_check_save_msr(void)

[PATCH 4.9 59/62] Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM

[Greg Kroah-Hartman]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

commit 711f8c3fb3db61897080468586b970c87c61d9e4 upstream.

The Bluetooth spec states that the valid range for SPSM is from
0x0001-0x00ff so it is invalid to accept values outside of this range:

  BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 3, Part A
  page 1059:
  Table 4.15: L2CAP_LE_CREDIT_BASED_CONNECTION_REQ SPSM ranges

CVE: CVE-2022-42896
CC: stable@vger.kernel.org
Reported-by: Tamás Koczka <poprdi@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bluetooth/l2cap_core.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -5543,6 +5543,19 @@ static int l2cap_le_connect_req(struct l
 	BT_DBG("psm 0x%2.2x scid 0x%4.4x mtu %u mps %u", __le16_to_cpu(psm),
 	       scid, mtu, mps);
 
+	/* BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 3, Part A
+	 * page 1059:
+	 *
+	 * Valid range: 0x0001-0x00ff
+	 *
+	 * Table 4.15: L2CAP_LE_CREDIT_BASED_CONNECTION_REQ SPSM ranges
+	 */
+	if (!psm || __le16_to_cpu(psm) > L2CAP_PSM_LE_DYN_END) {
+		result = L2CAP_CR_BAD_PSM;
+		chan = NULL;
+		goto response;
+	}
+
 	/* Check if we have socket listening on psm */
 	pchan = l2cap_global_chan_by_psm(BT_LISTEN, psm, &conn->hcon->src,
 					 &conn->hcon->dst, LE_LINK);

[PATCH 4.9 60/62] x86/ioremap: Fix page aligned size calculation in __ioremap_caller()

[Greg Kroah-Hartman]

From: Michael Kelley <mikelley@microsoft.com>

[ Upstream commit 4dbd6a3e90e03130973688fd79e19425f720d999 ]

Current code re-calculates the size after aligning the starting and
ending physical addresses on a page boundary. But the re-calculation
also embeds the masking of high order bits that exceed the size of
the physical address space (via PHYSICAL_PAGE_MASK). If the masking
removes any high order bits, the size calculation results in a huge
value that is likely to immediately fail.

Fix this by re-calculating the page-aligned size first. Then mask any
high order bits using PHYSICAL_PAGE_MASK.

Fixes: ffa71f33a820 ("x86, ioremap: Fix incorrect physical address handling in PAE mode")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/1668624097-14884-2-git-send-email-mikelley@microsoft.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/mm/ioremap.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index ecae9ac216fa..696fd6fdc107 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -126,9 +126,15 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr,
 	 * Mappings have to be page-aligned
 	 */
 	offset = phys_addr & ~PAGE_MASK;
-	phys_addr &= PHYSICAL_PAGE_MASK;
+	phys_addr &= PAGE_MASK;
 	size = PAGE_ALIGN(last_addr+1) - phys_addr;
 
+	/*
+	 * Mask out any bits not part of the actual physical
+	 * address, like memory encryption bits.
+	 */
+	phys_addr &= PHYSICAL_PAGE_MASK;
+
 	retval = reserve_memtype(phys_addr, (u64)phys_addr + size,
 						pcm, &new_pcm);
 	if (retval) {
-- 
2.35.1

[PATCH 4.9 61/62] mmc: sdhci: use FIELD_GET for preset value bit masks

[Greg Kroah-Hartman]

From: Masahiro Yamada <yamada.masahiro@socionext.com>

commit fa0910107a9fea170b817f31da2a65463e00e80e upstream.

Use the FIELD_GET macro to get access to the register fields.
Delete the shift macros.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/r/20200312110050.21732-1-yamada.masahiro@socionext.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/sdhci.c |   10 +++++-----
 drivers/mmc/host/sdhci.h |   10 ++++------
 2 files changed, 9 insertions(+), 11 deletions(-)

--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -13,6 +13,7 @@
  *     - JMicron (hardware and technical support)
  */
 
+#include <linux/bitfield.h>
 #include <linux/delay.h>
 #include <linux/highmem.h>
 #include <linux/io.h>
@@ -1266,10 +1267,9 @@ u16 sdhci_calc_clk(struct sdhci_host *ho
 
 			clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
 			pre_val = sdhci_get_preset_value(host);
-			div = (pre_val & SDHCI_PRESET_SDCLK_FREQ_MASK)
-				>> SDHCI_PRESET_SDCLK_FREQ_SHIFT;
+			div = FIELD_GET(SDHCI_PRESET_SDCLK_FREQ_MASK, pre_val);
 			if (host->clk_mul &&
-				(pre_val & SDHCI_PRESET_CLKGEN_SEL_MASK)) {
+				(pre_val & SDHCI_PRESET_CLKGEN_SEL)) {
 				clk = SDHCI_PROG_CLOCK_MODE;
 				real_div = div + 1;
 				clk_mul = host->clk_mul;
@@ -1720,8 +1720,8 @@ static void sdhci_set_ios(struct mmc_hos
 
 			sdhci_enable_preset_value(host, true);
 			preset = sdhci_get_preset_value(host);
-			ios->drv_type = (preset & SDHCI_PRESET_DRV_MASK)
-				>> SDHCI_PRESET_DRV_SHIFT;
+			ios->drv_type = FIELD_GET(SDHCI_PRESET_DRV_MASK,
+						  preset);
 		}
 
 		/* Re-enable SD Clock */
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -13,6 +13,7 @@
 #ifndef __SDHCI_HW_H
 #define __SDHCI_HW_H
 
+#include <linux/bits.h>
 #include <linux/scatterlist.h>
 #include <linux/compiler.h>
 #include <linux/types.h>
@@ -244,12 +245,9 @@
 #define SDHCI_PRESET_FOR_SDR104        0x6C
 #define SDHCI_PRESET_FOR_DDR50 0x6E
 #define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */
-#define SDHCI_PRESET_DRV_MASK  0xC000
-#define SDHCI_PRESET_DRV_SHIFT  14
-#define SDHCI_PRESET_CLKGEN_SEL_MASK   0x400
-#define SDHCI_PRESET_CLKGEN_SEL_SHIFT	10
-#define SDHCI_PRESET_SDCLK_FREQ_MASK   0x3FF
-#define SDHCI_PRESET_SDCLK_FREQ_SHIFT	0
+#define SDHCI_PRESET_DRV_MASK		GENMASK(15, 14)
+#define SDHCI_PRESET_CLKGEN_SEL		BIT(10)
+#define SDHCI_PRESET_SDCLK_FREQ_MASK	GENMASK(9, 0)
 
 #define SDHCI_SLOT_INT_STATUS	0xFC
 

[PATCH 4.9 62/62] mmc: sdhci: Fix voltage switch delay

[Greg Kroah-Hartman]

From: Adrian Hunter <adrian.hunter@intel.com>

commit c981cdfb9925f64a364f13c2b4f98f877308a408 upstream.

Commit 20b92a30b561 ("mmc: sdhci: update signal voltage switch code")
removed voltage switch delays from sdhci because mmc core had been
enhanced to support them. However that assumed that sdhci_set_ios()
did a single clock change, which it did not, and so the delays in mmc
core, which should have come after the first clock change, were not
effective.

Fix by avoiding re-configuring UHS and preset settings when the clock
is turning on and the settings have not changed. That then also avoids
the associated clock changes, so that then sdhci_set_ios() does a single
clock change when voltage switching, and the mmc core delays become
effective.

To do that has meant keeping track of driver strength (host->drv_type),
and cases of reinitialization (host->reinit_uhs).

Note also, the 'turning_on_clk' restriction should not be necessary
but is done to minimize the impact of the change on stable kernels.

Fixes: 20b92a30b561 ("mmc: sdhci: update signal voltage switch code")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221128133259.38305-2-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/sdhci.c |   61 +++++++++++++++++++++++++++++++++++++++++------
 drivers/mmc/host/sdhci.h |    2 +
 2 files changed, 56 insertions(+), 7 deletions(-)

--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -240,6 +240,7 @@ static void sdhci_init(struct sdhci_host
 	if (soft) {
 		/* force clock reconfiguration */
 		host->clock = 0;
+		host->reinit_uhs = true;
 		mmc->ops->set_ios(mmc, &mmc->ios);
 	}
 }
@@ -1580,12 +1581,47 @@ void sdhci_set_uhs_signaling(struct sdhc
 }
 EXPORT_SYMBOL_GPL(sdhci_set_uhs_signaling);
 
+static bool sdhci_timing_has_preset(unsigned char timing)
+{
+	switch (timing) {
+	case MMC_TIMING_UHS_SDR12:
+	case MMC_TIMING_UHS_SDR25:
+	case MMC_TIMING_UHS_SDR50:
+	case MMC_TIMING_UHS_SDR104:
+	case MMC_TIMING_UHS_DDR50:
+	case MMC_TIMING_MMC_DDR52:
+		return true;
+	};
+	return false;
+}
+
+static bool sdhci_preset_needed(struct sdhci_host *host, unsigned char timing)
+{
+	return !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN) &&
+	       sdhci_timing_has_preset(timing);
+}
+
+static bool sdhci_presetable_values_change(struct sdhci_host *host, struct mmc_ios *ios)
+{
+	/*
+	 * Preset Values are: Driver Strength, Clock Generator and SDCLK/RCLK
+	 * Frequency. Check if preset values need to be enabled, or the Driver
+	 * Strength needs updating. Note, clock changes are handled separately.
+	 */
+	return !host->preset_enabled &&
+	       (sdhci_preset_needed(host, ios->timing) || host->drv_type != ios->drv_type);
+}
+
 static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
+	bool reinit_uhs = host->reinit_uhs;
+	bool turning_on_clk = false;
 	unsigned long flags;
 	u8 ctrl;
 
+	host->reinit_uhs = false;
+
 	spin_lock_irqsave(&host->lock, flags);
 
 	if (host->flags & SDHCI_DEVICE_DEAD) {
@@ -1611,6 +1647,8 @@ static void sdhci_set_ios(struct mmc_hos
 		sdhci_enable_preset_value(host, false);
 
 	if (!ios->clock || ios->clock != host->clock) {
+		turning_on_clk = ios->clock && !host->clock;
+
 		host->ops->set_clock(host, ios->clock);
 		host->clock = ios->clock;
 
@@ -1637,6 +1675,17 @@ static void sdhci_set_ios(struct mmc_hos
 
 	host->ops->set_bus_width(host, ios->bus_width);
 
+	/*
+	 * Special case to avoid multiple clock changes during voltage
+	 * switching.
+	 */
+	if (!reinit_uhs &&
+	    turning_on_clk &&
+	    host->timing == ios->timing &&
+	    host->version >= SDHCI_SPEC_300 &&
+	    !sdhci_presetable_values_change(host, ios))
+		return;
+
 	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
 
 	if ((ios->timing == MMC_TIMING_SD_HS ||
@@ -1682,6 +1731,7 @@ static void sdhci_set_ios(struct mmc_hos
 			}
 
 			sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+			host->drv_type = ios->drv_type;
 		} else {
 			/*
 			 * According to SDHC Spec v3.00, if the Preset Value
@@ -1709,19 +1759,14 @@ static void sdhci_set_ios(struct mmc_hos
 		host->ops->set_uhs_signaling(host, ios->timing);
 		host->timing = ios->timing;
 
-		if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN) &&
-				((ios->timing == MMC_TIMING_UHS_SDR12) ||
-				 (ios->timing == MMC_TIMING_UHS_SDR25) ||
-				 (ios->timing == MMC_TIMING_UHS_SDR50) ||
-				 (ios->timing == MMC_TIMING_UHS_SDR104) ||
-				 (ios->timing == MMC_TIMING_UHS_DDR50) ||
-				 (ios->timing == MMC_TIMING_MMC_DDR52))) {
+		if (sdhci_preset_needed(host, ios->timing)) {
 			u16 preset;
 
 			sdhci_enable_preset_value(host, true);
 			preset = sdhci_get_preset_value(host);
 			ios->drv_type = FIELD_GET(SDHCI_PRESET_DRV_MASK,
 						  preset);
+			host->drv_type = ios->drv_type;
 		}
 
 		/* Re-enable SD Clock */
@@ -2882,6 +2927,7 @@ int sdhci_resume_host(struct sdhci_host
 		sdhci_init(host, 0);
 		host->pwr = 0;
 		host->clock = 0;
+		host->reinit_uhs = true;
 		mmc->ops->set_ios(mmc, &mmc->ios);
 	} else {
 		sdhci_init(host, (host->mmc->pm_flags & MMC_PM_KEEP_POWER));
@@ -2946,6 +2992,7 @@ int sdhci_runtime_resume_host(struct sdh
 	/* Force clock and power re-program */
 	host->pwr = 0;
 	host->clock = 0;
+	host->reinit_uhs = true;
 	mmc->ops->start_signal_voltage_switch(mmc, &mmc->ios);
 	mmc->ops->set_ios(mmc, &mmc->ios);
 
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -466,6 +466,8 @@ struct sdhci_host {
 
 	unsigned int clock;	/* Current clock (MHz) */
 	u8 pwr;			/* Current voltage */
+	u8 drv_type;		/* Current UHS-I driver type */
+	bool reinit_uhs;	/* Force UHS-related re-initialization */
 
 	bool runtime_suspended;	/* Host is runtime suspended */
 	bool bus_on;		/* Bus power prevents runtime suspend */

Re: [PATCH 4.9 00/62] 4.9.335-rc1 review

[Jon Hunter]

Hi Greg,

On 05/12/2022 19:08, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.335 release.
> There are 62 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 07 Dec 2022 19:07:46 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.335-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 
> -------------
> Pseudo-Shortlog of commits:
> 
> Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>      Linux 4.9.335-rc1
> 
> Adrian Hunter <adrian.hunter@intel.com>
>      mmc: sdhci: Fix voltage switch delay


I am seeing a boot regression on a couple boards and bisect is pointing 
to the above commit.

Test results for stable-v4.9:
     8 builds:	8 pass, 0 fail
     20 boots:	16 pass, 4 fail
     16 tests:	16 pass, 0 fail

Linux version:	4.9.335-rc1-g9ad972a03b17
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                 tegra210-p2371-2180, tegra30-cardhu-a04

Boot failures:	tegra124-jetson-tk1, tegra210-p2371-2180

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.9 00/62] 4.9.335-rc1 review

[Florian Fainelli]

On 12/5/22 14:28, Jon Hunter wrote:
> Hi Greg,
> 
> On 05/12/2022 19:08, Greg Kroah-Hartman wrote:
>> This is the start of the stable review cycle for the 4.9.335 release.
>> There are 62 patches in this series, all will be posted as a response
>> to this one.  If anyone has any issues with these being applied, please
>> let me know.
>>
>> Responses should be made by Wed, 07 Dec 2022 19:07:46 +0000.
>> Anything received after that time might be too late.
>>
>> The whole patch series can be found in one patch at:
>>     https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.335-rc1.gz
>> or in the git tree and branch at:
>>     git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
>> and the diffstat can be found below.
>>
>> thanks,
>>
>> greg k-h
>>
>> -------------
>> Pseudo-Shortlog of commits:
>>
>> Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>>      Linux 4.9.335-rc1
>>
>> Adrian Hunter <adrian.hunter@intel.com>
>>      mmc: sdhci: Fix voltage switch delay
> 
> 
> I am seeing a boot regression on a couple boards and bisect is pointing 
> to the above commit.

Same thing here, getting a hard lock for our devices with the SDHCI 
controller enabled, sometimes we are lucky to see the following:

[    4.790367] mmc0: SDHCI controller on 84b0000.sdhci [84b0000.sdhci] 
using ADMA 64-bit
[   25.802351] INFO: rcu_sched detected stalls on CPUs/tasks:
[   25.807871]  1-...: (1 GPs behind) idle=561/140000000000000/0 
softirq=728/728 fqs=5252
[   25.815892]  (detected by 0, t=21017 jiffies, g=61, c=60, q=55)
[   25.821834] Task dump for CPU 1:
[   25.825069] kworker/1:1     R  running task        0   509      2 
0x00000002
[   25.832164] Workqueue: events_freezable mmc_rescan
[   25.836974] Backtrace:
[   25.839440] [<ce32fea4>] (0xce32fea4) from [<ce32fed4>] (0xce32fed4)
[   25.845803] Backtrace aborted due to bad frame pointer <cd2f0a54>

Also confirmed that reverting that change ("mmc: sdhci: Fix voltage 
switch delay") allows devices to boot properly.

Had not a chance to test the change when submitted for mainline despite 
being copied, sorry about that.

Since that specific commit is also included in the other stable trees 
(5.4, 5.10, 5.15 and 6.0) I will let you know whether the same issue is 
present in those trees shortly thereafter.
-- 
Florian

Re: [PATCH 4.9 00/62] 4.9.335-rc1 review

[Florian Fainelli]

On 12/5/22 14:48, Florian Fainelli wrote:
> On 12/5/22 14:28, Jon Hunter wrote:
>> Hi Greg,
>>
>> On 05/12/2022 19:08, Greg Kroah-Hartman wrote:
>>> This is the start of the stable review cycle for the 4.9.335 release.
>>> There are 62 patches in this series, all will be posted as a response
>>> to this one.  If anyone has any issues with these being applied, please
>>> let me know.
>>>
>>> Responses should be made by Wed, 07 Dec 2022 19:07:46 +0000.
>>> Anything received after that time might be too late.
>>>
>>> The whole patch series can be found in one patch at:
>>>     https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.335-rc1.gz
>>> or in the git tree and branch at:
>>>     git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
>>> and the diffstat can be found below.
>>>
>>> thanks,
>>>
>>> greg k-h
>>>
>>> -------------
>>> Pseudo-Shortlog of commits:
>>>
>>> Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>>>      Linux 4.9.335-rc1
>>>
>>> Adrian Hunter <adrian.hunter@intel.com>
>>>      mmc: sdhci: Fix voltage switch delay
>>
>>
>> I am seeing a boot regression on a couple boards and bisect is 
>> pointing to the above commit.
> 
> Same thing here, getting a hard lock for our devices with the SDHCI 
> controller enabled, sometimes we are lucky to see the following:
> 
> [    4.790367] mmc0: SDHCI controller on 84b0000.sdhci [84b0000.sdhci] 
> using ADMA 64-bit
> [   25.802351] INFO: rcu_sched detected stalls on CPUs/tasks:
> [   25.807871]  1-...: (1 GPs behind) idle=561/140000000000000/0 
> softirq=728/728 fqs=5252
> [   25.815892]  (detected by 0, t=21017 jiffies, g=61, c=60, q=55)
> [   25.821834] Task dump for CPU 1:
> [   25.825069] kworker/1:1     R  running task        0   509      2 
> 0x00000002
> [   25.832164] Workqueue: events_freezable mmc_rescan
> [   25.836974] Backtrace:
> [   25.839440] [<ce32fea4>] (0xce32fea4) from [<ce32fed4>] (0xce32fed4)
> [   25.845803] Backtrace aborted due to bad frame pointer <cd2f0a54>
> 
> Also confirmed that reverting that change ("mmc: sdhci: Fix voltage 
> switch delay") allows devices to boot properly.
> 
> Had not a chance to test the change when submitted for mainline despite 
> being copied, sorry about that.
> 
> Since that specific commit is also included in the other stable trees 
> (5.4, 5.10, 5.15 and 6.0) I will let you know whether the same issue is 
> present in those trees shortly thereafter.

This only appears to impact 4.9, Adrian is there a missing functional 
dependency for "mmc: sdhci: Fix voltage switch delay" to work correctly 
on the 4.9 kernel?
-- 
Florian

Re: [PATCH 4.9 00/62] 4.9.335-rc1 review

[Shuah Khan]

On 12/5/22 12:08, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.335 release.
> There are 62 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 07 Dec 2022 19:07:46 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.335-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 4.9 00/62] 4.9.335-rc1 review

[Adrian Hunter]

On 6/12/22 02:11, Florian Fainelli wrote:
> On 12/5/22 14:48, Florian Fainelli wrote:
>> On 12/5/22 14:28, Jon Hunter wrote:
>>> Hi Greg,
>>>
>>> On 05/12/2022 19:08, Greg Kroah-Hartman wrote:
>>>> This is the start of the stable review cycle for the 4.9.335 release.
>>>> There are 62 patches in this series, all will be posted as a response
>>>> to this one.  If anyone has any issues with these being applied, please
>>>> let me know.
>>>>
>>>> Responses should be made by Wed, 07 Dec 2022 19:07:46 +0000.
>>>> Anything received after that time might be too late.
>>>>
>>>> The whole patch series can be found in one patch at:
>>>>     https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.335-rc1.gz
>>>> or in the git tree and branch at:
>>>>     git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
>>>> and the diffstat can be found below.
>>>>
>>>> thanks,
>>>>
>>>> greg k-h
>>>>
>>>> -------------
>>>> Pseudo-Shortlog of commits:
>>>>
>>>> Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>>>>      Linux 4.9.335-rc1
>>>>
>>>> Adrian Hunter <adrian.hunter@intel.com>
>>>>      mmc: sdhci: Fix voltage switch delay
>>>
>>>
>>> I am seeing a boot regression on a couple boards and bisect is pointing to the above commit.
>>
>> Same thing here, getting a hard lock for our devices with the SDHCI controller enabled, sometimes we are lucky to see the following:
>>
>> [    4.790367] mmc0: SDHCI controller on 84b0000.sdhci [84b0000.sdhci] using ADMA 64-bit
>> [   25.802351] INFO: rcu_sched detected stalls on CPUs/tasks:
>> [   25.807871]  1-...: (1 GPs behind) idle=561/140000000000000/0 softirq=728/728 fqs=5252
>> [   25.815892]  (detected by 0, t=21017 jiffies, g=61, c=60, q=55)
>> [   25.821834] Task dump for CPU 1:
>> [   25.825069] kworker/1:1     R  running task        0   509      2 0x00000002
>> [   25.832164] Workqueue: events_freezable mmc_rescan
>> [   25.836974] Backtrace:
>> [   25.839440] [<ce32fea4>] (0xce32fea4) from [<ce32fed4>] (0xce32fed4)
>> [   25.845803] Backtrace aborted due to bad frame pointer <cd2f0a54>
>>
>> Also confirmed that reverting that change ("mmc: sdhci: Fix voltage switch delay") allows devices to boot properly.
>>
>> Had not a chance to test the change when submitted for mainline despite being copied, sorry about that.
>>
>> Since that specific commit is also included in the other stable trees (5.4, 5.10, 5.15 and 6.0) I will let you know whether the same issue is present in those trees shortly thereafter.
> 
> This only appears to impact 4.9, Adrian is there a missing functional dependency for "mmc: sdhci: Fix voltage switch delay" to work correctly on the 4.9 kernel?

The thing that leaps to mind is that "mmc: sdhci: Fix voltage switch delay" returns out of sdhci_set_ios() without releasing the spinlock which was removed in later kernels.  I expect below would help, but a revert might allow a more considered response - it is a holiday here today.


diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index cfd665f0d6db..f3e2aba53ffa 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1684,7 +1684,7 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	    host->timing == ios->timing &&
 	    host->version >= SDHCI_SPEC_300 &&
 	    !sdhci_presetable_values_change(host, ios))
-		return;
+		goto out;
 
 	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
 
@@ -1773,7 +1773,7 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		host->ops->set_clock(host, host->clock);
 	} else
 		sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
-
+out:
 	/*
 	 * Some (ENE) controllers go apeshit on some ios operation,
 	 * signalling timeout and CRC errors even on CMD0. Resetting

Re: [PATCH 4.9 00/62] 4.9.335-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 825 bytes --]

Hi!

> This is the start of the stable review cycle for the 4.9.335 release.
> There are 62 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.9.y
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.9 00/62] 4.9.335-rc1 review

[Greg Kroah-Hartman]

On Tue, Dec 06, 2022 at 11:23:15AM +0200, Adrian Hunter wrote:
> On 6/12/22 02:11, Florian Fainelli wrote:
> > On 12/5/22 14:48, Florian Fainelli wrote:
> >> On 12/5/22 14:28, Jon Hunter wrote:
> >>> Hi Greg,
> >>>
> >>> On 05/12/2022 19:08, Greg Kroah-Hartman wrote:
> >>>> This is the start of the stable review cycle for the 4.9.335 release.
> >>>> There are 62 patches in this series, all will be posted as a response
> >>>> to this one.  If anyone has any issues with these being applied, please
> >>>> let me know.
> >>>>
> >>>> Responses should be made by Wed, 07 Dec 2022 19:07:46 +0000.
> >>>> Anything received after that time might be too late.
> >>>>
> >>>> The whole patch series can be found in one patch at:
> >>>>     https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.335-rc1.gz
> >>>> or in the git tree and branch at:
> >>>>     git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> >>>> and the diffstat can be found below.
> >>>>
> >>>> thanks,
> >>>>
> >>>> greg k-h
> >>>>
> >>>> -------------
> >>>> Pseudo-Shortlog of commits:
> >>>>
> >>>> Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> >>>>      Linux 4.9.335-rc1
> >>>>
> >>>> Adrian Hunter <adrian.hunter@intel.com>
> >>>>      mmc: sdhci: Fix voltage switch delay
> >>>
> >>>
> >>> I am seeing a boot regression on a couple boards and bisect is pointing to the above commit.
> >>
> >> Same thing here, getting a hard lock for our devices with the SDHCI controller enabled, sometimes we are lucky to see the following:
> >>
> >> [    4.790367] mmc0: SDHCI controller on 84b0000.sdhci [84b0000.sdhci] using ADMA 64-bit
> >> [   25.802351] INFO: rcu_sched detected stalls on CPUs/tasks:
> >> [   25.807871]  1-...: (1 GPs behind) idle=561/140000000000000/0 softirq=728/728 fqs=5252
> >> [   25.815892]  (detected by 0, t=21017 jiffies, g=61, c=60, q=55)
> >> [   25.821834] Task dump for CPU 1:
> >> [   25.825069] kworker/1:1     R  running task        0   509      2 0x00000002
> >> [   25.832164] Workqueue: events_freezable mmc_rescan
> >> [   25.836974] Backtrace:
> >> [   25.839440] [<ce32fea4>] (0xce32fea4) from [<ce32fed4>] (0xce32fed4)
> >> [   25.845803] Backtrace aborted due to bad frame pointer <cd2f0a54>
> >>
> >> Also confirmed that reverting that change ("mmc: sdhci: Fix voltage switch delay") allows devices to boot properly.
> >>
> >> Had not a chance to test the change when submitted for mainline despite being copied, sorry about that.
> >>
> >> Since that specific commit is also included in the other stable trees (5.4, 5.10, 5.15 and 6.0) I will let you know whether the same issue is present in those trees shortly thereafter.
> > 
> > This only appears to impact 4.9, Adrian is there a missing functional dependency for "mmc: sdhci: Fix voltage switch delay" to work correctly on the 4.9 kernel?
> 
> The thing that leaps to mind is that "mmc: sdhci: Fix voltage switch delay" returns out of sdhci_set_ios() without releasing the spinlock which was removed in later kernels.  I expect below would help, but a revert might allow a more considered response - it is a holiday here today.

I'll just drop them for now from 4.9, thanks!

greg k-h

Re: [PATCH 4.9 38/62] qlcnic: fix sleep-in-atomic-context bugs caused by msleep

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 785 bytes --]

Hi!

> From: Duoming Zhou <duoming@zju.edu.cn>

>    (atomic context)
> dev_watchdog
>   qlcnic_tx_timeout
>     qlcnic_83xx_idc_request_reset
>       qlcnic_83xx_lock_driver
>         qlcnic_83xx_recover_driver_lock
>           msleep
> 
> Fix by changing msleep() to mdelay(), the mdelay() is
> busy-waiting and the bugs could be mitigated.

The mdelay is for 200 msec:

qlcnic_83xx_hw.h:#define QLC_83XX_DRV_LOCK_RECOVERY_DELAY 200

This may be an improvement, but spinning for 200 msec in atomic
context is not okay, I'm afraid.

Best regards,
                                                        Pavel


-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]