SAMA5D3 Xplained: SPL broken after panic added to /lib/time.c:94

[Eugen.Hristev at microchip.com <Eugen.Hristev@microchip.com>]

On 3/23/21 1:28 PM, Manuel Lu?s Reis wrote:

> Hi,
> 
> Thanks for your reply.
> 
>  > Can you please check if this commit is in your tree, or, if the same has
>  > to be applied in your case (sama5d3), to make it work ?
> 
> I've got that change in my tree, but I'm still getting the error message.

The change may be dedicated to sama5d2 devices. Could you have a look 
please if your device (sama5d3) needs this change as well ? I mean, does 
doing something similar for sama5d3 fixes your problem ?

Thanks,
Eugen

> 
> I am using up-to-date mainline U-Boot.
> 
> Thanks
> 
> 
> 
> On Tue, 23 Mar 2021 at 11:14, <Eugen.Hristev@microchip.com 
> <mailto:Eugen.Hristev@microchip.com>> wrote:
> 
>     Hi,
> 
>     Can you please check if this commit is in your tree, or, if the same
>     has
>     to be applied in your case (sama5d3), to make it work ?
> 
>     Here is the commit :
> 
> 
>     https://source.denx.de/u-boot/custodians/u-boot-atmel/-/commit/786f35b619ddbfb88e4532d11a56413f5dab473f
> 
> 
> 
>     On 3/23/21 1:06 PM, Manuel Lu?s Reis wrote:
>      > Hello,
>      >
>      > I've been having issues with SPL booting?in the SAMA5D3 Xplained
>     board
>      > getting the following error, with up-to-date mainline U-boot and
>      > sama5d3_xplained _mmc_defconfig:
>      >
>      > -----------------------------------------------
>      > RomBOOT
>      >
>      > <debug_uart>
>      > Could not initialize timer (err -19)
>      > .....
>      > -----------------------------------------------
>      >
>      > I could trace back the error to commit?4b2be78.
>      >
>      > This topic has been raised before on
>      >
>     http://u-boot.10912.n7.nabble.com/PATCH-v2-time-Fix-get-ticks-being-non-monotonic-td426172.html
>      > Tried the suggestions there with the same result.
>      >
>      > I'm am not too knowledgeable with U-Boot nor this board. Could
>     you shed
>      > some light on this? Any pointers would be appreciated.
>      >
>      > Let me know if you require additional information.
>      >
>      > Cheers,
>      > Manuel
>      >
>      > Output from dm_dump_all():
>      >
>      >? ?Class ? ? Index ?Probed ?Driver ? ? ? ? ? ? ? ?Name
>      > -----------------------------------------------------------
>      >? ?root ?0 ?[ + ] ? root_driver ?root_driver
>      >? ?simple_bus ?0 ?[ ? ] ? simple_bus ?`-- ahb
>      >? ?simple_bus ?1 ?[ ? ] ? simple_bus ? ? ?`-- apb
>      >? ?mmc ?0 ?[ ? ] ? atmel-mci ? ? ? ? ?|-- mmc at f0000000
>      >? ?blk ?0 ?[ ? ] ? mmc_blk ? ? ? ? ?| ? `-- mmc at f0000000.blk
>      >? ?mmc ?1 ?[ ? ] ? atmel-mci ? ? ? ? ?|-- mmc at f8000000
>      >? ?blk ?1 ?[ ? ] ? mmc_blk ? ? ? ? ?| ? `-- mmc at f8000000.blk
>      >? ?serial ?0 ?[ ? ] ? serial_atmel ? ? ? ? ?|-- serial at ffffee00
>      >? ?pinctrl ?0 ?[ ? ] ? atmel_sama5d3_pinctrl ? ? ? ? ?|--
>     pinctrl at fffff200
>      >? ?pinconfig ?0 ?[ ? ] ? pinconfig ? ? ? ? ?| ? |-- dbgu
>      >? ?pinconfig ?1 ?[ ? ] ? pinconfig ? ? ? ? ?| ? | ? `-- dbgu-0
>      >? ?pinconfig ?2 ?[ ? ] ? pinconfig ? ? ? ? ?| ? |-- mmc0
>      >? ?pinconfig ?3 ?[ ? ] ? pinconfig ? ? ? ? ?| ? | ? |--
>     mmc0_clk_cmd_dat0
>      >? ?pinconfig ?4 ?[ ? ] ? pinconfig ? ? ? ? ?| ? | ? |-- mmc0_dat1_3
>      >? ?pinconfig ?5 ?[ ? ] ? pinconfig ? ? ? ? ?| ? | ? `-- mmc0_dat4_7
>      >? ?pinconfig ?6 ?[ ? ] ? pinconfig ? ? ? ? ?| ? |-- mmc1
>      >? ?pinconfig ?7 ?[ ? ] ? pinconfig ? ? ? ? ?| ? | ? |--
>     mmc1_clk_cmd_dat0
>      >? ?pinconfig ?8 ?[ ? ] ? pinconfig ? ? ? ? ?| ? | ? `-- mmc1_dat1_3
>      >? ?pinconfig ?9 ?[ ? ] ? pinconfig ? ? ? ? ?| ? |-- spi0
>      >? ?pinconfig ?10 ?[ ? ] ? pinconfig ? ? ? ? ?| ? | ? `-- spi0-0
>      >? ?pinconfig ?11 ?[ ? ] ? pinconfig ? ? ? ? ?| ? |-- spi1
>      >? ?pinconfig ?12 ?[ ? ] ? pinconfig ? ? ? ? ?| ? | ? `-- spi1-0
>      >? ?pinconfig ?13 ?[ ? ] ? pinconfig ? ? ? ? ?| ? `-- board
>      >? ?pinconfig ?14 ?[ ? ] ? pinconfig ? ? ? ? ?| ? ? ? |-- mmc0_cd
>      >? ?pinconfig ?15 ?[ ? ] ? pinconfig ? ? ? ? ?| ? ? ? `-- mmc1_cd
>      >? ?gpio ?0 ?[ ? ] ? atmel_at91rm9200_gpio ? ? ? ? ?|-- gpio at fffff200
>      >? ?gpio ?1 ?[ ? ] ? atmel_at91rm9200_gpio ? ? ? ? ?|-- gpio at fffff400
>      >? ?gpio ?2 ?[ ? ] ? atmel_at91rm9200_gpio ? ? ? ? ?|-- gpio at fffff600
>      >? ?gpio ?3 ?[ ? ] ? atmel_at91rm9200_gpio ? ? ? ? ?|-- gpio at fffff800
>      >? ?gpio ?4 ?[ ? ] ? atmel_at91rm9200_gpio ? ? ? ? ?|-- gpio at fffffa00
>      >? ?simple_bus ?2 ?[ ? ] ? at91-pmc ? ? ? ? ?`-- pmc at fffffc00
>      >? ?clk ?0 ?[ ? ] ? at91sam9x5-utmi-clk ? ? ? ? ? ? ?|-- utmick
>      >? ?clk ?1 ?[ ? ] ? at91-master-clk ? ? ? ? ? ? ?|-- masterck
>      >? ?misc ?0 ?[ ? ] ? sam9x5-periph-clk ? ? ? ? ? ? ?`-- periphck
>      >? ?clk ?2 ?[ ? ] ? periph-clk ? ? ? ? ? ? ? ? ?|-- dbgu_clk at 2
>      >? ?clk ?3 ?[ ? ] ? periph-clk ? ? ? ? ? ? ? ? ?|-- pioA_clk at 6
>      >? ?clk ?4 ?[ ? ] ? periph-clk ? ? ? ? ? ? ? ? ?|-- pioB_clk at 7
>      >? ?clk ?5 ?[ ? ] ? periph-clk ? ? ? ? ? ? ? ? ?|-- pioC_clk at 8
>      >? ?clk ?6 ?[ ? ] ? periph-clk ? ? ? ? ? ? ? ? ?|-- pioD_clk at 9
>      >? ?clk ?7 ?[ ? ] ? periph-clk ? ? ? ? ? ? ? ? ?|-- pioE_clk at 10
>      >? ?clk ?8 ?[ ? ] ? periph-clk ? ? ? ? ? ? ? ? ?|-- mci0_clk at 21
>      >? ?clk ?9 ?[ ? ] ? periph-clk ? ? ? ? ? ? ? ? ?|-- mci1_clk at 22
>      >? ?clk ?10 ?[ ? ] ? periph-clk ? ? ? ? ? ? ? ? ?|-- spi0_clk at 24
>      >? ?clk ?11 ?[ ? ] ? periph-clk ? ? ? ? ? ? ? ? ?`-- spi1_clk at 25
>      > Could not initialize timer (err -19)
>      >
>