SAMA5D3 Xplained: SPL broken after panic added to /lib/time.c:94

From: "Manuel Luís Reis" <mluis.reis@gmail.com>
To: u-boot@lists.denx.de
Subject: SAMA5D3 Xplained: SPL broken after panic added to /lib/time.c:94
Date: Tue, 23 Mar 2021 11:06:43 +0000	[thread overview]
Message-ID: <CAJYnj0imdcdHsNzfz1ZcJUO9G+LC9XK6XxpL-POJTBp7d3xaqg@mail.gmail.com> (raw)

Hello,

I've been having issues with SPL booting in the SAMA5D3 Xplained board
getting the following error, with up-to-date mainline U-boot and
sama5d3_xplained _mmc_defconfig:

-----------------------------------------------
RomBOOT

<debug_uart>
Could not initialize timer (err -19)
.....
-----------------------------------------------

I could trace back the error to commit 4b2be78.

This topic has been raised before on
http://u-boot.10912.n7.nabble.com/PATCH-v2-time-Fix-get-ticks-being-non-monotonic-td426172.html
Tried the suggestions there with the same result.

I'm am not too knowledgeable with U-Boot nor this board. Could you shed
some light on this? Any pointers would be appreciated.

Let me know if you require additional information.

Cheers,
Manuel

Output from dm_dump_all():

 Class     Index  Probed  Driver                Name
-----------------------------------------------------------
 root  0  [ + ]   root_driver  root_driver
 simple_bus  0  [   ]   simple_bus  `-- ahb
 simple_bus  1  [   ]   simple_bus      `-- apb
 mmc  0  [   ]   atmel-mci          |-- mmc at f0000000
 blk  0  [   ]   mmc_blk          |   `-- mmc at f0000000.blk
 mmc  1  [   ]   atmel-mci          |-- mmc at f8000000
 blk  1  [   ]   mmc_blk          |   `-- mmc at f8000000.blk
 serial  0  [   ]   serial_atmel          |-- serial at ffffee00
 pinctrl  0  [   ]   atmel_sama5d3_pinctrl          |-- pinctrl at fffff200
 pinconfig  0  [   ]   pinconfig          |   |-- dbgu
 pinconfig  1  [   ]   pinconfig          |   |   `-- dbgu-0
 pinconfig  2  [   ]   pinconfig          |   |-- mmc0
 pinconfig  3  [   ]   pinconfig          |   |   |-- mmc0_clk_cmd_dat0
 pinconfig  4  [   ]   pinconfig          |   |   |-- mmc0_dat1_3
 pinconfig  5  [   ]   pinconfig          |   |   `-- mmc0_dat4_7
 pinconfig  6  [   ]   pinconfig          |   |-- mmc1
 pinconfig  7  [   ]   pinconfig          |   |   |-- mmc1_clk_cmd_dat0
 pinconfig  8  [   ]   pinconfig          |   |   `-- mmc1_dat1_3
 pinconfig  9  [   ]   pinconfig          |   |-- spi0
 pinconfig  10  [   ]   pinconfig          |   |   `-- spi0-0
 pinconfig  11  [   ]   pinconfig          |   |-- spi1
 pinconfig  12  [   ]   pinconfig          |   |   `-- spi1-0
 pinconfig  13  [   ]   pinconfig          |   `-- board
 pinconfig  14  [   ]   pinconfig          |       |-- mmc0_cd
 pinconfig  15  [   ]   pinconfig          |       `-- mmc1_cd
 gpio  0  [   ]   atmel_at91rm9200_gpio          |-- gpio at fffff200
 gpio  1  [   ]   atmel_at91rm9200_gpio          |-- gpio at fffff400
 gpio  2  [   ]   atmel_at91rm9200_gpio          |-- gpio at fffff600
 gpio  3  [   ]   atmel_at91rm9200_gpio          |-- gpio at fffff800
 gpio  4  [   ]   atmel_at91rm9200_gpio          |-- gpio at fffffa00
 simple_bus  2  [   ]   at91-pmc          `-- pmc at fffffc00
 clk  0  [   ]   at91sam9x5-utmi-clk              |-- utmick
 clk  1  [   ]   at91-master-clk              |-- masterck
 misc  0  [   ]   sam9x5-periph-clk              `-- periphck
 clk  2  [   ]   periph-clk                  |-- dbgu_clk at 2
 clk  3  [   ]   periph-clk                  |-- pioA_clk at 6
 clk  4  [   ]   periph-clk                  |-- pioB_clk at 7
 clk  5  [   ]   periph-clk                  |-- pioC_clk at 8
 clk  6  [   ]   periph-clk                  |-- pioD_clk at 9
 clk  7  [   ]   periph-clk                  |-- pioE_clk at 10
 clk  8  [   ]   periph-clk                  |-- mci0_clk at 21
 clk  9  [   ]   periph-clk                  |-- mci1_clk at 22
 clk  10  [   ]   periph-clk                  |-- spi0_clk at 24
 clk  11  [   ]   periph-clk                  `-- spi1_clk at 25
Could not initialize timer (err -19)