SAMA5D3 Xplained: SPL broken after panic added to /lib/time.c:94

["Manuel Luís Reis" <mluis.reis@gmail.com>]

> The change may be dedicated to sama5d2 devices. Could you have a look
> please if your device (sama5d3) needs this change as well ? I mean, does
> doing something similar for sama5d3 fixes your problem ?

I  am not quite sure how to check what you suggest to be honest.

The commit you've sent seems to be board independent ->
mach-at91/spl_atmel.c. Doesn't it apply to all of the at91 boards, sama5d3
inclusive?
I don't see where else I could make a change like that.

Thanks for your patience.



On Tue, 23 Mar 2021 at 11:38, <Eugen.Hristev@microchip.com> wrote:

> On 3/23/21 1:28 PM, Manuel Lu?s Reis wrote:
>
> > Hi,
> >
> > Thanks for your reply.
> >
> >  > Can you please check if this commit is in your tree, or, if the same
> has
> >  > to be applied in your case (sama5d3), to make it work ?
> >
> > I've got that change in my tree, but I'm still getting the error message.
>
> The change may be dedicated to sama5d2 devices. Could you have a look
> please if your device (sama5d3) needs this change as well ? I mean, does
> doing something similar for sama5d3 fixes your problem ?
>
> Thanks,
> Eugen
>
> >
> > I am using up-to-date mainline U-Boot.
> >
> > Thanks
> >
> >
> >
> > On Tue, 23 Mar 2021 at 11:14, <Eugen.Hristev@microchip.com
> > <mailto:Eugen.Hristev@microchip.com>> wrote:
> >
> >     Hi,
> >
> >     Can you please check if this commit is in your tree, or, if the same
> >     has
> >     to be applied in your case (sama5d3), to make it work ?
> >
> >     Here is the commit :
> >
> >
> >
> https://source.denx.de/u-boot/custodians/u-boot-atmel/-/commit/786f35b619ddbfb88e4532d11a56413f5dab473f
> >
> >
> >
> >     On 3/23/21 1:06 PM, Manuel Lu?s Reis wrote:
> >      > Hello,
> >      >
> >      > I've been having issues with SPL booting in the SAMA5D3 Xplained
> >     board
> >      > getting the following error, with up-to-date mainline U-boot and
> >      > sama5d3_xplained _mmc_defconfig:
> >      >
> >      > -----------------------------------------------
> >      > RomBOOT
> >      >
> >      > <debug_uart>
> >      > Could not initialize timer (err -19)
> >      > .....
> >      > -----------------------------------------------
> >      >
> >      > I could trace back the error to commit 4b2be78.
> >      >
> >      > This topic has been raised before on
> >      >
> >
> http://u-boot.10912.n7.nabble.com/PATCH-v2-time-Fix-get-ticks-being-non-monotonic-td426172.html
> >      > Tried the suggestions there with the same result.
> >      >
> >      > I'm am not too knowledgeable with U-Boot nor this board. Could
> >     you shed
> >      > some light on this? Any pointers would be appreciated.
> >      >
> >      > Let me know if you require additional information.
> >      >
> >      > Cheers,
> >      > Manuel
> >      >
> >      > Output from dm_dump_all():
> >      >
> >      >   Class     Index  Probed  Driver                Name
> >      > -----------------------------------------------------------
> >      >   root  0  [ + ]   root_driver  root_driver
> >      >   simple_bus  0  [   ]   simple_bus  `-- ahb
> >      >   simple_bus  1  [   ]   simple_bus      `-- apb
> >      >   mmc  0  [   ]   atmel-mci          |-- mmc at f0000000
> >      >   blk  0  [   ]   mmc_blk          |   `-- mmc at f0000000.blk
> >      >   mmc  1  [   ]   atmel-mci          |-- mmc at f8000000
> >      >   blk  1  [   ]   mmc_blk          |   `-- mmc at f8000000.blk
> >      >   serial  0  [   ]   serial_atmel          |-- serial at ffffee00
> >      >   pinctrl  0  [   ]   atmel_sama5d3_pinctrl          |--
> >     pinctrl at fffff200
> >      >   pinconfig  0  [   ]   pinconfig          |   |-- dbgu
> >      >   pinconfig  1  [   ]   pinconfig          |   |   `-- dbgu-0
> >      >   pinconfig  2  [   ]   pinconfig          |   |-- mmc0
> >      >   pinconfig  3  [   ]   pinconfig          |   |   |--
> >     mmc0_clk_cmd_dat0
> >      >   pinconfig  4  [   ]   pinconfig          |   |   |-- mmc0_dat1_3
> >      >   pinconfig  5  [   ]   pinconfig          |   |   `-- mmc0_dat4_7
> >      >   pinconfig  6  [   ]   pinconfig          |   |-- mmc1
> >      >   pinconfig  7  [   ]   pinconfig          |   |   |--
> >     mmc1_clk_cmd_dat0
> >      >   pinconfig  8  [   ]   pinconfig          |   |   `-- mmc1_dat1_3
> >      >   pinconfig  9  [   ]   pinconfig          |   |-- spi0
> >      >   pinconfig  10  [   ]   pinconfig          |   |   `-- spi0-0
> >      >   pinconfig  11  [   ]   pinconfig          |   |-- spi1
> >      >   pinconfig  12  [   ]   pinconfig          |   |   `-- spi1-0
> >      >   pinconfig  13  [   ]   pinconfig          |   `-- board
> >      >   pinconfig  14  [   ]   pinconfig          |       |-- mmc0_cd
> >      >   pinconfig  15  [   ]   pinconfig          |       `-- mmc1_cd
> >      >   gpio  0  [   ]   atmel_at91rm9200_gpio          |--
> gpio at fffff200
> >      >   gpio  1  [   ]   atmel_at91rm9200_gpio          |--
> gpio at fffff400
> >      >   gpio  2  [   ]   atmel_at91rm9200_gpio          |--
> gpio at fffff600
> >      >   gpio  3  [   ]   atmel_at91rm9200_gpio          |--
> gpio at fffff800
> >      >   gpio  4  [   ]   atmel_at91rm9200_gpio          |--
> gpio at fffffa00
> >      >   simple_bus  2  [   ]   at91-pmc          `-- pmc at fffffc00
> >      >   clk  0  [   ]   at91sam9x5-utmi-clk              |-- utmick
> >      >   clk  1  [   ]   at91-master-clk              |-- masterck
> >      >   misc  0  [   ]   sam9x5-periph-clk              `-- periphck
> >      >   clk  2  [   ]   periph-clk                  |-- dbgu_clk at 2
> >      >   clk  3  [   ]   periph-clk                  |-- pioA_clk at 6
> >      >   clk  4  [   ]   periph-clk                  |-- pioB_clk at 7
> >      >   clk  5  [   ]   periph-clk                  |-- pioC_clk at 8
> >      >   clk  6  [   ]   periph-clk                  |-- pioD_clk at 9
> >      >   clk  7  [   ]   periph-clk                  |-- pioE_clk at 10
> >      >   clk  8  [   ]   periph-clk                  |-- mci0_clk at 21
> >      >   clk  9  [   ]   periph-clk                  |-- mci1_clk at 22
> >      >   clk  10  [   ]   periph-clk                  |-- spi0_clk at 24
> >      >   clk  11  [   ]   periph-clk                  `-- spi1_clk at 25
> >      > Could not initialize timer (err -19)
> >      >
> >
>
>