RT patch

RT patch

[George Anzinger]

Ingo,

Do you keep the RT patch as one slab or is it a series of patches 
(presumably managed by quilt)?

If the latter, could you make a break out available, much as Andrew does 
for the mm kernels?

This would make it much easier to isolate the various "neat" things and, 
possibly, send them on to Andrew/ Linus or where ever.
-- 
George Anzinger   george@mvista.com
HRT (High-res-timers):  http://sourceforge.net/projects/high-res-timers/

rt patch

[Stéphane ancelot]

Hi,
I have tried the rt patches available on kernel.org.
Unfortunately none patches correctly with latests kernel !

Where can I download the good ones ?
Regards,
Steph

Re: rt patch

[Romain Perier]

Hi,

did you try the patches located at
https://www.kernel.org/pub/linux/kernel/projects/rt/ ?
Use the corresponding mainline kernel, for example if you want to use
3.18.13-rt10, download linux 3.18.13 (from torvald's repo for example)
and apply the rt patch on it .
Latest rt patches are for linux 3.18 and 4.0, so if you use the
correct version it should work just fine.

Everything is explained on the wiki,
Regards,
Romain

2015-06-09 16:47 GMT+02:00 Stéphane ancelot <sancelot@numalliance.com>:
> Hi,
> I have tried the rt patches available on kernel.org.
> Unfortunately none patches correctly with latests kernel !
>
> Where can I download the good ones ?
> Regards,
> Steph
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: rt patch

[Stéphane ancelot]

Hi,

Yes, I did ! This is why I asked ....
and kernels from here , why v3.0 and v4.0 kernels, patch errors .

https://www.kernel.org/pub/linux/kernel/


Regards
S.Ancelot


On 09/06/2015 17:12, Romain Perier wrote:
> Hi,
>
> did you try the patches located at
> https://www.kernel.org/pub/linux/kernel/projects/rt/ ?
> Use the corresponding mainline kernel, for example if you want to use
> 3.18.13-rt10, download linux 3.18.13 (from torvald's repo for example)
> and apply the rt patch on it .
> Latest rt patches are for linux 3.18 and 4.0, so if you use the
> correct version it should work just fine.
>
> Everything is explained on the wiki,
> Regards,
> Romain
>
> 2015-06-09 16:47 GMT+02:00 Stéphane ancelot <sancelot@numalliance.com>:
>> Hi,
>> I have tried the rt patches available on kernel.org.
>> Unfortunately none patches correctly with latests kernel !
>>
>> Where can I download the good ones ?
>> Regards,
>> Steph
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: rt patch

[Romain Perier]

Hi,

It would propably be easier for us if you give the error.... What is
the exact error ?

Regards,
Romain

2015-06-10 8:44 GMT+02:00 Stéphane ancelot <sancelot@numalliance.com>:
> Hi,
>
> Yes, I did ! This is why I asked ....
> and kernels from here , why v3.0 and v4.0 kernels, patch errors .
>
> https://www.kernel.org/pub/linux/kernel/
>
>
> Regards
> S.Ancelot
>
>
> On 09/06/2015 17:12, Romain Perier wrote:
>>
>> Hi,
>>
>> did you try the patches located at
>> https://www.kernel.org/pub/linux/kernel/projects/rt/ ?
>> Use the corresponding mainline kernel, for example if you want to use
>> 3.18.13-rt10, download linux 3.18.13 (from torvald's repo for example)
>> and apply the rt patch on it .
>> Latest rt patches are for linux 3.18 and 4.0, so if you use the
>> correct version it should work just fine.
>>
>> Everything is explained on the wiki,
>> Regards,
>> Romain
>>
>> 2015-06-09 16:47 GMT+02:00 Stéphane ancelot <sancelot@numalliance.com>:
>>>
>>> Hi,
>>> I have tried the rt patches available on kernel.org.
>>> Unfortunately none patches correctly with latests kernel !
>>>
>>> Where can I download the good ones ?
>>> Regards,
>>> Steph
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-rt-users"
>>> in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: rt patch

[Stéphane ancelot]

here is an example with linux-3.18.13 and patch 3.18.13-rt10:
3.18.13-rt10

zcat ../patches-3.18.13-rt10.tar.gz |patch -p1 --dry-run
patching file arch/arm64/kernel/perf_event.c
Hunk #1 succeeded at 461 (offset -6 lines).
patching file arch/sparc/Kconfig
patching file arch/arm64/Kconfig
Hunk #1 succeeded at 61 (offset -7 lines).
patching file include/linux/notifier.h
patching file include/linux/srcu.h
patching file arch/x86/mm/iomap_32.c
Hunk #1 FAILED at 65.
1 out of 1 hunk FAILED -- saving rejects to file arch/x86/mm/iomap_32.c.rej
patching file arch/arm/mm/highmem.c
patching file kernel/futex.c
patching file kernel/softirq.c
Hunk #1 FAILED at 461.
1 out of 1 hunk FAILED -- saving rejects to file kernel/softirq.c.rej
patching file arch/arm/include/asm/cmpxchg.h
patching file arch/arm/mm/fault.c
patching file kernel/printk/printk.c
patching file arch/x86/kvm/lapic.c
patching file arch/arm/kvm/arm.c
patching file arch/arm/kvm/psci.c
patching file arch/powerpc/include/asm/kvm_host.h
patching file arch/powerpc/kvm/book3s_hv.c
patching file arch/s390/include/asm/kvm_host.h
patching file arch/s390/kvm/interrupt.c
patching file arch/x86/kvm/lapic.c
Hunk #1 succeeded at 1539 (offset -34 lines).
Hunk #2 succeeded at 1553 (offset -34 lines).
patching file include/linux/kvm_host.h
patching file virt/kvm/async_pf.c
patching file virt/kvm/kvm_main.c
Hunk #2 succeeded at 1741 (offset 1 line).
Hunk #3 succeeded at 1758 (offset 1 line).
Hunk #4 succeeded at 1770 (offset 1 line).
Hunk #5 succeeded at 1879 (offset 1 line).
patching file kernel/locking/rtmutex.c
Hunk #1 FAILED at 1179.
1 out of 1 hunk FAILED -- saving rejects to file 
kernel/locking/rtmutex.c.rej
patching file include/linux/rwsem_rt.h
Hunk #1 FAILED at 20.
1 out of 1 hunk FAILED -- saving rejects to file 
include/linux/rwsem_rt.h.rej
patching file kernel/locking/rt.c
Hunk #1 FAILED at 316.
Hunk #2 FAILED at 327.
Hunk #3 FAILED at 356.
Hunk #4 FAILED at 371.
Hunk #5 FAILED at 396.
5 out of 5 hunks FAILED -- saving rejects to file kernel/locking/rt.c.rej
patching file include/linux/hrtimer.h
Reversed (or previously applied) patch detected!  Assume -R? [n]


On 10/06/2015 08:50, Romain Perier wrote:
> Hi,
>
> It would propably be easier for us if you give the error.... What is
> the exact error ?
>
> Regards,
> Romain
>
> 2015-06-10 8:44 GMT+02:00 Stéphane ancelot <sancelot@numalliance.com>:
>> Hi,
>>
>> Yes, I did ! This is why I asked ....
>> and kernels from here , why v3.0 and v4.0 kernels, patch errors .
>>
>> https://www.kernel.org/pub/linux/kernel/
>>
>>
>> Regards
>> S.Ancelot
>>
>>
>> On 09/06/2015 17:12, Romain Perier wrote:
>>>
>>> Hi,
>>>
>>> did you try the patches located at
>>> https://www.kernel.org/pub/linux/kernel/projects/rt/ ?
>>> Use the corresponding mainline kernel, for example if you want to use
>>> 3.18.13-rt10, download linux 3.18.13 (from torvald's repo for example)
>>> and apply the rt patch on it .
>>> Latest rt patches are for linux 3.18 and 4.0, so if you use the
>>> correct version it should work just fine.
>>>
>>> Everything is explained on the wiki,
>>> Regards,
>>> Romain
>>>
>>> 2015-06-09 16:47 GMT+02:00 Stéphane ancelot <sancelot@numalliance.com>:
>>>>
>>>> Hi,
>>>> I have tried the rt patches available on kernel.org.
>>>> Unfortunately none patches correctly with latests kernel !
>>>>
>>>> Where can I download the good ones ?
>>>> Regards,
>>>> Steph
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe linux-rt-users"
>>>> in
>>>> the body of a message to majordomo@vger.kernel.org
>>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: rt patch

[Joe Korty]

On Wed, Jun 10, 2015 at 02:58:33AM -0400, St??phane ancelot wrote:
> here is an example with linux-3.18.13 and patch 3.18.13-rt10:
> 3.18.13-rt10
> 
> zcat ../patches-3.18.13-rt10.tar.gz |patch -p1 --dry-run
> patching file arch/arm64/kernel/perf_event.c
> Hunk #1 succeeded at 461 (offset -6 lines).
> patching file arch/sparc/Kconfig
> patching file arch/arm64/Kconfig
> Hunk #1 succeeded at 61 (offset -7 lines).
> patching file include/linux/notifier.h
> patching file include/linux/srcu.h
> patching file arch/x86/mm/iomap_32.c
> Hunk #1 FAILED at 65.
> 1 out of 1 hunk FAILED -- saving rejects to file arch/x86/mm/iomap_32.c.rej


It appears you are applying the patch to an Android or other third-party
derivative of Linux, instead of Linux proper, or that either the kernel
or the patch you have fetched is corrupt.  Try re-fetching everything and
try again.  This sequence works for me:

   cd
   mkdir junk
   cd junk
   wget -q ftp://ftp.kernel.org/pub/linux/kernel/v3.0/linux-3.18.11.tar.xz
   wget -q ftp://ftp.kernel.org/pub/linux/kernel/projects/rt/3.18/patch-3.18.13-rt10.patch.xz
   tar xf l*xz
   cd linux*11
   unxz <../pat*xz | patch -p1

There are some (annoying) offset errors, but no fuzzies or rejects like you have
been seeing.

Joe

Re: rt patch

[Stéphane ancelot]

On 10/06/2015 17:47, Andy Pont wrote:
> Hi Joe,
>
> [snip]
>
>> This sequence works for me:
>>
>>     cd
>>     mkdir junk
>>     cd junk
>>     wget -q ftp://ftp.kernel.org/pub/linux/kernel/v3.0/linux-
>> 3.18.11.tar.xz
>>     wget -q
>> ftp://ftp.kernel.org/pub/linux/kernel/projects/rt/3.18/patch-3.18.13-
>> rt10.patch.xz
>>     tar xf l*xz
>>     cd linux*11
>>     unxz <../pat*xz | patch -p1
>>
>> There are some (annoying) offset errors, but no fuzzies or rejects like
>> you have been seeing.
>
> I think the reason you see offset errors is that you are trying to patch
> 3.18.11 with the 3.18.13 RT patch.  A quick test here substituting with :
>
> 	wget -q
> ftp://ftp.kernel.org/pub/linux/kernel/v3.0/linux-3.18.13.tar.xz
>
> gives no such errors!
>
> Andy.
>
It looks like this is a proxy related problem....

using wget I am unable to use ftp://, but http:// is downloading, 
however this does not work with the files retrieved.

can you give me working md5sum of files downloaded ?
Regards,
Steph

Re: rt patch

[Ralf Mardorf]

On Thu, 11 Jun 2015 08:23:29 +0200, Stéphane ancelot wrote:
>can you give me working md5sum of files downloaded ?

"These checksums are NOT intended to replace the web of trust. It is
merely a way for someone to quickly verify whether contents on one of
the many kernel.org mirrors match the contents on the master mirror.
While you may use them to quickly verify whether what you have
downloaded matches what we have on our central storage system, you
should still use the GPG web of trust to verify whether the release
tarball actually matches what the kernel developer published." -
https://www.kernel.org/category/signatures.html

Begin forwarded message:

Date: Thu, 11 Jun 2015 01:25:50 +0200 (CEST)
From: Thomas Gleixner
To: Stéphane ancelot
Cc: Romain Perier, linux-rt-users@vger.kernel.org
Subject: Re: rt patch

[snip]

> here is an example with linux-3.18.13 and patch 3.18.13-rt10:
> 3.18.13-rt10
> 
> zcat ../patches-3.18.13-rt10.tar.gz |patch -p1 --dry-run

You are trying to apply a tarball of patches instead of a single
combined patch. Use patch-3.18.13-rt10.gz instead.
[snip]
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: rt patch

[Stéphane ancelot]

On 11/06/2015 10:19, Ralf Mardorf wrote:
> On Thu, 11 Jun 2015 08:23:29 +0200, Stéphane ancelot wrote:
>> can you give me working md5sum of files downloaded ?
>
> "These checksums are NOT intended to replace the web of trust. It is
> merely a way for someone to quickly verify whether contents on one of
> the many kernel.org mirrors match the contents on the master mirror.
> While you may use them to quickly verify whether what you have
> downloaded matches what we have on our central storage system, you
> should still use the GPG web of trust to verify whether the release
> tarball actually matches what the kernel developer published." -
> https://www.kernel.org/category/signatures.html
>
> Begin forwarded message:
>
> Date: Thu, 11 Jun 2015 01:25:50 +0200 (CEST)
> From: Thomas Gleixner
> To: Stéphane ancelot
> Cc: Romain Perier, linux-rt-users@vger.kernel.org
> Subject: Re: rt patch
>
> [snip]
>
>> here is an example with linux-3.18.13 and patch 3.18.13-rt10:
>> 3.18.13-rt10
>>
>> zcat ../patches-3.18.13-rt10.tar.gz |patch -p1 --dry-run
>
> You are trying to apply a tarball of patches instead of a single
> combined patch. Use patch-3.18.13-rt10.gz instead.
> [snip]
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
Ok, I checked,

signatures are right. files well downloaded.

I have always mistake while patching. software release problems?

unxz version 4.999.9beta
patch version 2.6
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: rt patch

[Stéphane ancelot]

Using a more recent system, I have following mistakes:
trying to patch a file not present in the kernel.
Sincerely, I do not understand what is the problem !

checking file arch/arm64/kernel/perf_event.c
Hunk #1 succeeded at 461 (offset -6 lines).
checking file arch/sparc/Kconfig
checking file arch/arm64/Kconfig
Hunk #1 succeeded at 61 (offset -7 lines).
checking file include/linux/notifier.h
checking file include/linux/srcu.h
checking file arch/x86/mm/iomap_32.c
Hunk #1 FAILED at 65.
1 out of 1 hunk FAILED
checking file arch/arm/mm/highmem.c
checking file kernel/futex.c
checking file kernel/softirq.c
Hunk #1 FAILED at 461.
1 out of 1 hunk FAILED
checking file arch/arm/include/asm/cmpxchg.h
checking file arch/arm/mm/fault.c
checking file kernel/printk/printk.c
checking file arch/x86/kvm/lapic.c
checking file arch/arm/kvm/arm.c
checking file arch/arm/kvm/psci.c
checking file arch/powerpc/include/asm/kvm_host.h
checking file arch/powerpc/kvm/book3s_hv.c
checking file arch/s390/include/asm/kvm_host.h
checking file arch/s390/kvm/interrupt.c
checking file arch/x86/kvm/lapic.c
Hunk #1 succeeded at 1539 (offset -34 lines).
Hunk #2 succeeded at 1553 (offset -34 lines).
checking file include/linux/kvm_host.h
checking file virt/kvm/async_pf.c
checking file virt/kvm/kvm_main.c
Hunk #2 succeeded at 1741 (offset 1 line).
Hunk #3 succeeded at 1758 (offset 1 line).
Hunk #4 succeeded at 1770 (offset 1 line).
Hunk #5 succeeded at 1879 (offset 1 line).
checking file kernel/locking/rtmutex.c
Hunk #1 FAILED at 1179.
1 out of 1 hunk FAILED
can't find file to patch at input line 1031
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|patches/Revert-rwsem-rt-Do-not-allow-readers-to-nest.patch000066400000000000000000000054511252644363100240520ustar00rootroot00000000000000From 
1db4ce56001465fba240916d0c8de7443cafec62 Mon Sep 17 00:00:00 2001
|From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|Date: Wed, 25 Feb 2015 12:16:43 +0100
|Subject: [PATCH] Revert "rwsem-rt: Do not allow readers to nest"
|
|This behaviour is required by cpufreq and its logic is "okay": It does a
|read_lock followed by a try_read_lock.
|Lockdep warns if one try a read_lock twice in -RT and vanilla so it
|should be good. We still only allow multiple readers as long as it is in
|the same process.
|
|Cc: stable-rt@vger.kernel.org
|Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|---
| include/linux/rwsem_rt.h |    1 +
| kernel/locking/rt.c      |   29 +++++++++++++++++++++++------
| 2 files changed, 24 insertions(+), 6 deletions(-)
|
|--- a/include/linux/rwsem_rt.h
|+++ b/include/linux/rwsem_rt.h
--------------------------







On 11/06/2015 10:51, Stéphane ancelot wrote:
> On 11/06/2015 10:19, Ralf Mardorf wrote:
>> On Thu, 11 Jun 2015 08:23:29 +0200, Stéphane ancelot wrote:
>>> can you give me working md5sum of files downloaded ?
>>
>> "These checksums are NOT intended to replace the web of trust. It is
>> merely a way for someone to quickly verify whether contents on one of
>> the many kernel.org mirrors match the contents on the master mirror.
>> While you may use them to quickly verify whether what you have
>> downloaded matches what we have on our central storage system, you
>> should still use the GPG web of trust to verify whether the release
>> tarball actually matches what the kernel developer published." -
>> https://www.kernel.org/category/signatures.html
>>
>> Begin forwarded message:
>>
>> Date: Thu, 11 Jun 2015 01:25:50 +0200 (CEST)
>> From: Thomas Gleixner
>> To: Stéphane ancelot
>> Cc: Romain Perier, linux-rt-users@vger.kernel.org
>> Subject: Re: rt patch
>>
>> [snip]
>>
>>> here is an example with linux-3.18.13 and patch 3.18.13-rt10:
>>> 3.18.13-rt10
>>>
>>> zcat ../patches-3.18.13-rt10.tar.gz |patch -p1 --dry-run
>>
>> You are trying to apply a tarball of patches instead of a single
>> combined patch. Use patch-3.18.13-rt10.gz instead.
>> [snip]
>> --
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-rt-users" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
> Ok, I checked,
>
> signatures are right. files well downloaded.
>
> I have always mistake while patching. software release problems?
>
> unxz version 4.999.9beta
> patch version 2.6
> --
> To unsubscribe from this list: send the line "unsubscribe
> linux-rt-users" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: rt patch

[Thomas Gleixner]

[-- Attachment #1: Type: TEXT/PLAIN, Size: 757 bytes --]

On Thu, 11 Jun 2015, Stéphane ancelot wrote:

> Using a more recent system, I have following mistakes:
> trying to patch a file not present in the kernel.
> Sincerely, I do not understand what is the problem !

Ok. This is the last attempt to help you. I told you before, that:

> > > > zcat ../patches-3.18.13-rt10.tar.gz |patch -p1 --dry-run
> > > 
> > > You are trying to apply a tarball of patches instead of a single
> > > combined patch. Use patch-3.18.13-rt10.patch.gz instead.

https://www.kernel.org/pub/linux/kernel/projects/rt/3.18/patch-3.18.13-rt10.patch.gz

This file can be applied with "patch -p1" after decompression.

The tarball, which you are trying to use contains a series of patches
and CANNOT be applied with patch.

Thanks,

	tglx

Re: rt patch

[Stéphane ancelot]

On 11/06/2015 13:03, Thomas Gleixner wrote:
> On Thu, 11 Jun 2015, Stéphane ancelot wrote:
>
>> Using a more recent system, I have following mistakes:
>> trying to patch a file not present in the kernel.
>> Sincerely, I do not understand what is the problem !
>
> Ok. This is the last attempt to help you. I told you before, that:
>
>>>>> zcat ../patches-3.18.13-rt10.tar.gz |patch -p1 --dry-run
>>>>
>>>> You are trying to apply a tarball of patches instead of a single
>>>> combined patch. Use patch-3.18.13-rt10.patch.gz instead.
>
> https://www.kernel.org/pub/linux/kernel/projects/rt/3.18/patch-3.18.13-rt10.patch.gz
>
> This file can be applied with "patch -p1" after decompression.
>
> The tarball, which you are trying to use contains a series of patches
> and CANNOT be applied with patch.
>
> Thanks,
>
> 	tglx
>
Yes, I tried using  this patch too. And the kernel was downloaded here :
https://www.kernel.org/pub/linux/kernel/v3.x/linux-3.18.13.tar.xz

note: using ftp://ftp.kernel.org does not reply

Regards,
S.Ancelot
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: rt patch

[Stéphane ancelot]

On 11/06/2015 13:21, Stéphane ancelot wrote:
> On 11/06/2015 13:03, Thomas Gleixner wrote:
>> On Thu, 11 Jun 2015, Stéphane ancelot wrote:
>>
>>> Using a more recent system, I have following mistakes:
>>> trying to patch a file not present in the kernel.
>>> Sincerely, I do not understand what is the problem !
>>
>> Ok. This is the last attempt to help you. I told you before, that:
>>
>>>>>> zcat ../patches-3.18.13-rt10.tar.gz |patch -p1 --dry-run
>>>>>
>>>>> You are trying to apply a tarball of patches instead of a single
>>>>> combined patch. Use patch-3.18.13-rt10.patch.gz instead.
>>
>> https://www.kernel.org/pub/linux/kernel/projects/rt/3.18/patch-3.18.13-rt10.patch.gz
>>

I gave it a try . YES !!! this one rocks !

>>
>> This file can be applied with "patch -p1" after decompression.
>>
>> The tarball, which you are trying to use contains a series of patches
>> and CANNOT be applied with patch.
>>
>> Thanks,
>>
>>     tglx
>>
> Yes, I tried using  this patch too. And the kernel was downloaded here :
> https://www.kernel.org/pub/linux/kernel/v3.x/linux-3.18.13.tar.xz
>
> note: using ftp://ftp.kernel.org does not reply
>
> Regards,
> S.Ancelot
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: rt patch

[Stéphane ancelot]

THANKS GUYS IT IS SOLVED.

On 11/06/2015 13:03, Thomas Gleixner wrote:
> On Thu, 11 Jun 2015, Stéphane ancelot wrote:
>
>> Using a more recent system, I have following mistakes:
>> trying to patch a file not present in the kernel.
>> Sincerely, I do not understand what is the problem !
>
> Ok. This is the last attempt to help you. I told you before, that:
>
>>>>> zcat ../patches-3.18.13-rt10.tar.gz |patch -p1 --dry-run
>>>>
>>>> You are trying to apply a tarball of patches instead of a single
>>>> combined patch. Use patch-3.18.13-rt10.patch.gz instead.
>
> https://www.kernel.org/pub/linux/kernel/projects/rt/3.18/patch-3.18.13-rt10.patch.gz
>
> This file can be applied with "patch -p1" after decompression.
>
> The tarball, which you are trying to use contains a series of patches
> and CANNOT be applied with patch.
>
> Thanks,
>
> 	tglx
>
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: rt patch

[Thomas Gleixner]

[-- Attachment #1: Type: TEXT/PLAIN, Size: 379 bytes --]

On Wed, 10 Jun 2015, Stéphane ancelot wrote:

Please:
      - Do not top post
      - Trim your replies

> here is an example with linux-3.18.13 and patch 3.18.13-rt10:
> 3.18.13-rt10
> 
> zcat ../patches-3.18.13-rt10.tar.gz |patch -p1 --dry-run

You are trying to apply a tarball of patches instead of a single
combined patch. Use patch-3.18.13-rt10.gz instead.

Thanks,

	tglx