* rt patch @ 2015-06-09 14:47 Stéphane ancelot 2015-06-09 15:12 ` Romain Perier 0 siblings, 1 reply; 16+ messages in thread From: Stéphane ancelot @ 2015-06-09 14:47 UTC (permalink / raw) To: linux-rt-users Hi, I have tried the rt patches available on kernel.org. Unfortunately none patches correctly with latests kernel ! Where can I download the good ones ? Regards, Steph ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: rt patch 2015-06-09 14:47 rt patch Stéphane ancelot @ 2015-06-09 15:12 ` Romain Perier 2015-06-10 6:44 ` Stéphane ancelot 0 siblings, 1 reply; 16+ messages in thread From: Romain Perier @ 2015-06-09 15:12 UTC (permalink / raw) To: Stéphane ancelot; +Cc: linux-rt-users Hi, did you try the patches located at https://www.kernel.org/pub/linux/kernel/projects/rt/ ? Use the corresponding mainline kernel, for example if you want to use 3.18.13-rt10, download linux 3.18.13 (from torvald's repo for example) and apply the rt patch on it . Latest rt patches are for linux 3.18 and 4.0, so if you use the correct version it should work just fine. Everything is explained on the wiki, Regards, Romain 2015-06-09 16:47 GMT+02:00 Stéphane ancelot <sancelot@numalliance.com>: > Hi, > I have tried the rt patches available on kernel.org. > Unfortunately none patches correctly with latests kernel ! > > Where can I download the good ones ? > Regards, > Steph > -- > To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: rt patch 2015-06-09 15:12 ` Romain Perier @ 2015-06-10 6:44 ` Stéphane ancelot 2015-06-10 6:50 ` Romain Perier 0 siblings, 1 reply; 16+ messages in thread From: Stéphane ancelot @ 2015-06-10 6:44 UTC (permalink / raw) To: Romain Perier; +Cc: linux-rt-users Hi, Yes, I did ! This is why I asked .... and kernels from here , why v3.0 and v4.0 kernels, patch errors . https://www.kernel.org/pub/linux/kernel/ Regards S.Ancelot On 09/06/2015 17:12, Romain Perier wrote: > Hi, > > did you try the patches located at > https://www.kernel.org/pub/linux/kernel/projects/rt/ ? > Use the corresponding mainline kernel, for example if you want to use > 3.18.13-rt10, download linux 3.18.13 (from torvald's repo for example) > and apply the rt patch on it . > Latest rt patches are for linux 3.18 and 4.0, so if you use the > correct version it should work just fine. > > Everything is explained on the wiki, > Regards, > Romain > > 2015-06-09 16:47 GMT+02:00 Stéphane ancelot <sancelot@numalliance.com>: >> Hi, >> I have tried the rt patches available on kernel.org. >> Unfortunately none patches correctly with latests kernel ! >> >> Where can I download the good ones ? >> Regards, >> Steph >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: rt patch 2015-06-10 6:44 ` Stéphane ancelot @ 2015-06-10 6:50 ` Romain Perier 2015-06-10 6:58 ` Stéphane ancelot 0 siblings, 1 reply; 16+ messages in thread From: Romain Perier @ 2015-06-10 6:50 UTC (permalink / raw) To: Stéphane ancelot; +Cc: linux-rt-users Hi, It would propably be easier for us if you give the error.... What is the exact error ? Regards, Romain 2015-06-10 8:44 GMT+02:00 Stéphane ancelot <sancelot@numalliance.com>: > Hi, > > Yes, I did ! This is why I asked .... > and kernels from here , why v3.0 and v4.0 kernels, patch errors . > > https://www.kernel.org/pub/linux/kernel/ > > > Regards > S.Ancelot > > > On 09/06/2015 17:12, Romain Perier wrote: >> >> Hi, >> >> did you try the patches located at >> https://www.kernel.org/pub/linux/kernel/projects/rt/ ? >> Use the corresponding mainline kernel, for example if you want to use >> 3.18.13-rt10, download linux 3.18.13 (from torvald's repo for example) >> and apply the rt patch on it . >> Latest rt patches are for linux 3.18 and 4.0, so if you use the >> correct version it should work just fine. >> >> Everything is explained on the wiki, >> Regards, >> Romain >> >> 2015-06-09 16:47 GMT+02:00 Stéphane ancelot <sancelot@numalliance.com>: >>> >>> Hi, >>> I have tried the rt patches available on kernel.org. >>> Unfortunately none patches correctly with latests kernel ! >>> >>> Where can I download the good ones ? >>> Regards, >>> Steph >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-rt-users" >>> in >>> the body of a message to majordomo@vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: rt patch 2015-06-10 6:50 ` Romain Perier @ 2015-06-10 6:58 ` Stéphane ancelot 2015-06-10 14:40 ` Joe Korty 2015-06-10 23:25 ` Thomas Gleixner 0 siblings, 2 replies; 16+ messages in thread From: Stéphane ancelot @ 2015-06-10 6:58 UTC (permalink / raw) To: Romain Perier; +Cc: linux-rt-users here is an example with linux-3.18.13 and patch 3.18.13-rt10: 3.18.13-rt10 zcat ../patches-3.18.13-rt10.tar.gz |patch -p1 --dry-run patching file arch/arm64/kernel/perf_event.c Hunk #1 succeeded at 461 (offset -6 lines). patching file arch/sparc/Kconfig patching file arch/arm64/Kconfig Hunk #1 succeeded at 61 (offset -7 lines). patching file include/linux/notifier.h patching file include/linux/srcu.h patching file arch/x86/mm/iomap_32.c Hunk #1 FAILED at 65. 1 out of 1 hunk FAILED -- saving rejects to file arch/x86/mm/iomap_32.c.rej patching file arch/arm/mm/highmem.c patching file kernel/futex.c patching file kernel/softirq.c Hunk #1 FAILED at 461. 1 out of 1 hunk FAILED -- saving rejects to file kernel/softirq.c.rej patching file arch/arm/include/asm/cmpxchg.h patching file arch/arm/mm/fault.c patching file kernel/printk/printk.c patching file arch/x86/kvm/lapic.c patching file arch/arm/kvm/arm.c patching file arch/arm/kvm/psci.c patching file arch/powerpc/include/asm/kvm_host.h patching file arch/powerpc/kvm/book3s_hv.c patching file arch/s390/include/asm/kvm_host.h patching file arch/s390/kvm/interrupt.c patching file arch/x86/kvm/lapic.c Hunk #1 succeeded at 1539 (offset -34 lines). Hunk #2 succeeded at 1553 (offset -34 lines). patching file include/linux/kvm_host.h patching file virt/kvm/async_pf.c patching file virt/kvm/kvm_main.c Hunk #2 succeeded at 1741 (offset 1 line). Hunk #3 succeeded at 1758 (offset 1 line). Hunk #4 succeeded at 1770 (offset 1 line). Hunk #5 succeeded at 1879 (offset 1 line). patching file kernel/locking/rtmutex.c Hunk #1 FAILED at 1179. 1 out of 1 hunk FAILED -- saving rejects to file kernel/locking/rtmutex.c.rej patching file include/linux/rwsem_rt.h Hunk #1 FAILED at 20. 1 out of 1 hunk FAILED -- saving rejects to file include/linux/rwsem_rt.h.rej patching file kernel/locking/rt.c Hunk #1 FAILED at 316. Hunk #2 FAILED at 327. Hunk #3 FAILED at 356. Hunk #4 FAILED at 371. Hunk #5 FAILED at 396. 5 out of 5 hunks FAILED -- saving rejects to file kernel/locking/rt.c.rej patching file include/linux/hrtimer.h Reversed (or previously applied) patch detected! Assume -R? [n] On 10/06/2015 08:50, Romain Perier wrote: > Hi, > > It would propably be easier for us if you give the error.... What is > the exact error ? > > Regards, > Romain > > 2015-06-10 8:44 GMT+02:00 Stéphane ancelot <sancelot@numalliance.com>: >> Hi, >> >> Yes, I did ! This is why I asked .... >> and kernels from here , why v3.0 and v4.0 kernels, patch errors . >> >> https://www.kernel.org/pub/linux/kernel/ >> >> >> Regards >> S.Ancelot >> >> >> On 09/06/2015 17:12, Romain Perier wrote: >>> >>> Hi, >>> >>> did you try the patches located at >>> https://www.kernel.org/pub/linux/kernel/projects/rt/ ? >>> Use the corresponding mainline kernel, for example if you want to use >>> 3.18.13-rt10, download linux 3.18.13 (from torvald's repo for example) >>> and apply the rt patch on it . >>> Latest rt patches are for linux 3.18 and 4.0, so if you use the >>> correct version it should work just fine. >>> >>> Everything is explained on the wiki, >>> Regards, >>> Romain >>> >>> 2015-06-09 16:47 GMT+02:00 Stéphane ancelot <sancelot@numalliance.com>: >>>> >>>> Hi, >>>> I have tried the rt patches available on kernel.org. >>>> Unfortunately none patches correctly with latests kernel ! >>>> >>>> Where can I download the good ones ? >>>> Regards, >>>> Steph >>>> -- >>>> To unsubscribe from this list: send the line "unsubscribe linux-rt-users" >>>> in >>>> the body of a message to majordomo@vger.kernel.org >>>> More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: rt patch 2015-06-10 6:58 ` Stéphane ancelot @ 2015-06-10 14:40 ` Joe Korty [not found] ` <00f101d0a394$d66f73a0$834e5ae0$@pont@sdcsystems.com> 2015-06-10 23:25 ` Thomas Gleixner 1 sibling, 1 reply; 16+ messages in thread From: Joe Korty @ 2015-06-10 14:40 UTC (permalink / raw) To: St??phane ancelot; +Cc: Romain Perier, linux-rt-users On Wed, Jun 10, 2015 at 02:58:33AM -0400, St??phane ancelot wrote: > here is an example with linux-3.18.13 and patch 3.18.13-rt10: > 3.18.13-rt10 > > zcat ../patches-3.18.13-rt10.tar.gz |patch -p1 --dry-run > patching file arch/arm64/kernel/perf_event.c > Hunk #1 succeeded at 461 (offset -6 lines). > patching file arch/sparc/Kconfig > patching file arch/arm64/Kconfig > Hunk #1 succeeded at 61 (offset -7 lines). > patching file include/linux/notifier.h > patching file include/linux/srcu.h > patching file arch/x86/mm/iomap_32.c > Hunk #1 FAILED at 65. > 1 out of 1 hunk FAILED -- saving rejects to file arch/x86/mm/iomap_32.c.rej It appears you are applying the patch to an Android or other third-party derivative of Linux, instead of Linux proper, or that either the kernel or the patch you have fetched is corrupt. Try re-fetching everything and try again. This sequence works for me: cd mkdir junk cd junk wget -q ftp://ftp.kernel.org/pub/linux/kernel/v3.0/linux-3.18.11.tar.xz wget -q ftp://ftp.kernel.org/pub/linux/kernel/projects/rt/3.18/patch-3.18.13-rt10.patch.xz tar xf l*xz cd linux*11 unxz <../pat*xz | patch -p1 There are some (annoying) offset errors, but no fuzzies or rejects like you have been seeing. Joe ^ permalink raw reply [flat|nested] 16+ messages in thread
[parent not found: <00f101d0a394$d66f73a0$834e5ae0$@pont@sdcsystems.com>]
* Re: rt patch [not found] ` <00f101d0a394$d66f73a0$834e5ae0$@pont@sdcsystems.com> @ 2015-06-11 6:23 ` Stéphane ancelot 2015-06-11 8:19 ` Ralf Mardorf 0 siblings, 1 reply; 16+ messages in thread From: Stéphane ancelot @ 2015-06-11 6:23 UTC (permalink / raw) To: andy.pont, 'Joe Korty'; +Cc: 'Romain Perier', linux-rt-users On 10/06/2015 17:47, Andy Pont wrote: > Hi Joe, > > [snip] > >> This sequence works for me: >> >> cd >> mkdir junk >> cd junk >> wget -q ftp://ftp.kernel.org/pub/linux/kernel/v3.0/linux- >> 3.18.11.tar.xz >> wget -q >> ftp://ftp.kernel.org/pub/linux/kernel/projects/rt/3.18/patch-3.18.13- >> rt10.patch.xz >> tar xf l*xz >> cd linux*11 >> unxz <../pat*xz | patch -p1 >> >> There are some (annoying) offset errors, but no fuzzies or rejects like >> you have been seeing. > > I think the reason you see offset errors is that you are trying to patch > 3.18.11 with the 3.18.13 RT patch. A quick test here substituting with : > > wget -q > ftp://ftp.kernel.org/pub/linux/kernel/v3.0/linux-3.18.13.tar.xz > > gives no such errors! > > Andy. > It looks like this is a proxy related problem.... using wget I am unable to use ftp://, but http:// is downloading, however this does not work with the files retrieved. can you give me working md5sum of files downloaded ? Regards, Steph ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: rt patch 2015-06-11 6:23 ` Stéphane ancelot @ 2015-06-11 8:19 ` Ralf Mardorf 2015-06-11 8:51 ` Stéphane ancelot 0 siblings, 1 reply; 16+ messages in thread From: Ralf Mardorf @ 2015-06-11 8:19 UTC (permalink / raw) To: linux-rt users On Thu, 11 Jun 2015 08:23:29 +0200, Stéphane ancelot wrote: >can you give me working md5sum of files downloaded ? "These checksums are NOT intended to replace the web of trust. It is merely a way for someone to quickly verify whether contents on one of the many kernel.org mirrors match the contents on the master mirror. While you may use them to quickly verify whether what you have downloaded matches what we have on our central storage system, you should still use the GPG web of trust to verify whether the release tarball actually matches what the kernel developer published." - https://www.kernel.org/category/signatures.html Begin forwarded message: Date: Thu, 11 Jun 2015 01:25:50 +0200 (CEST) From: Thomas Gleixner To: Stéphane ancelot Cc: Romain Perier, linux-rt-users@vger.kernel.org Subject: Re: rt patch [snip] > here is an example with linux-3.18.13 and patch 3.18.13-rt10: > 3.18.13-rt10 > > zcat ../patches-3.18.13-rt10.tar.gz |patch -p1 --dry-run You are trying to apply a tarball of patches instead of a single combined patch. Use patch-3.18.13-rt10.gz instead. [snip] -- To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: rt patch 2015-06-11 8:19 ` Ralf Mardorf @ 2015-06-11 8:51 ` Stéphane ancelot 2015-06-11 9:06 ` Stéphane ancelot 0 siblings, 1 reply; 16+ messages in thread From: Stéphane ancelot @ 2015-06-11 8:51 UTC (permalink / raw) To: Ralf Mardorf, linux-rt users On 11/06/2015 10:19, Ralf Mardorf wrote: > On Thu, 11 Jun 2015 08:23:29 +0200, Stéphane ancelot wrote: >> can you give me working md5sum of files downloaded ? > > "These checksums are NOT intended to replace the web of trust. It is > merely a way for someone to quickly verify whether contents on one of > the many kernel.org mirrors match the contents on the master mirror. > While you may use them to quickly verify whether what you have > downloaded matches what we have on our central storage system, you > should still use the GPG web of trust to verify whether the release > tarball actually matches what the kernel developer published." - > https://www.kernel.org/category/signatures.html > > Begin forwarded message: > > Date: Thu, 11 Jun 2015 01:25:50 +0200 (CEST) > From: Thomas Gleixner > To: Stéphane ancelot > Cc: Romain Perier, linux-rt-users@vger.kernel.org > Subject: Re: rt patch > > [snip] > >> here is an example with linux-3.18.13 and patch 3.18.13-rt10: >> 3.18.13-rt10 >> >> zcat ../patches-3.18.13-rt10.tar.gz |patch -p1 --dry-run > > You are trying to apply a tarball of patches instead of a single > combined patch. Use patch-3.18.13-rt10.gz instead. > [snip] > -- > To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Ok, I checked, signatures are right. files well downloaded. I have always mistake while patching. software release problems? unxz version 4.999.9beta patch version 2.6 -- To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: rt patch 2015-06-11 8:51 ` Stéphane ancelot @ 2015-06-11 9:06 ` Stéphane ancelot 2015-06-11 11:03 ` Thomas Gleixner 0 siblings, 1 reply; 16+ messages in thread From: Stéphane ancelot @ 2015-06-11 9:06 UTC (permalink / raw) To: Ralf Mardorf, linux-rt users Using a more recent system, I have following mistakes: trying to patch a file not present in the kernel. Sincerely, I do not understand what is the problem ! checking file arch/arm64/kernel/perf_event.c Hunk #1 succeeded at 461 (offset -6 lines). checking file arch/sparc/Kconfig checking file arch/arm64/Kconfig Hunk #1 succeeded at 61 (offset -7 lines). checking file include/linux/notifier.h checking file include/linux/srcu.h checking file arch/x86/mm/iomap_32.c Hunk #1 FAILED at 65. 1 out of 1 hunk FAILED checking file arch/arm/mm/highmem.c checking file kernel/futex.c checking file kernel/softirq.c Hunk #1 FAILED at 461. 1 out of 1 hunk FAILED checking file arch/arm/include/asm/cmpxchg.h checking file arch/arm/mm/fault.c checking file kernel/printk/printk.c checking file arch/x86/kvm/lapic.c checking file arch/arm/kvm/arm.c checking file arch/arm/kvm/psci.c checking file arch/powerpc/include/asm/kvm_host.h checking file arch/powerpc/kvm/book3s_hv.c checking file arch/s390/include/asm/kvm_host.h checking file arch/s390/kvm/interrupt.c checking file arch/x86/kvm/lapic.c Hunk #1 succeeded at 1539 (offset -34 lines). Hunk #2 succeeded at 1553 (offset -34 lines). checking file include/linux/kvm_host.h checking file virt/kvm/async_pf.c checking file virt/kvm/kvm_main.c Hunk #2 succeeded at 1741 (offset 1 line). Hunk #3 succeeded at 1758 (offset 1 line). Hunk #4 succeeded at 1770 (offset 1 line). Hunk #5 succeeded at 1879 (offset 1 line). checking file kernel/locking/rtmutex.c Hunk #1 FAILED at 1179. 1 out of 1 hunk FAILED can't find file to patch at input line 1031 Perhaps you used the wrong -p or --strip option? The text leading up to this was: -------------------------- |patches/Revert-rwsem-rt-Do-not-allow-readers-to-nest.patch000066400000000000000000000054511252644363100240520ustar00rootroot00000000000000From 1db4ce56001465fba240916d0c8de7443cafec62 Mon Sep 17 00:00:00 2001 |From: Sebastian Andrzej Siewior <bigeasy@linutronix.de> |Date: Wed, 25 Feb 2015 12:16:43 +0100 |Subject: [PATCH] Revert "rwsem-rt: Do not allow readers to nest" | |This behaviour is required by cpufreq and its logic is "okay": It does a |read_lock followed by a try_read_lock. |Lockdep warns if one try a read_lock twice in -RT and vanilla so it |should be good. We still only allow multiple readers as long as it is in |the same process. | |Cc: stable-rt@vger.kernel.org |Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> |--- | include/linux/rwsem_rt.h | 1 + | kernel/locking/rt.c | 29 +++++++++++++++++++++++------ | 2 files changed, 24 insertions(+), 6 deletions(-) | |--- a/include/linux/rwsem_rt.h |+++ b/include/linux/rwsem_rt.h -------------------------- On 11/06/2015 10:51, Stéphane ancelot wrote: > On 11/06/2015 10:19, Ralf Mardorf wrote: >> On Thu, 11 Jun 2015 08:23:29 +0200, Stéphane ancelot wrote: >>> can you give me working md5sum of files downloaded ? >> >> "These checksums are NOT intended to replace the web of trust. It is >> merely a way for someone to quickly verify whether contents on one of >> the many kernel.org mirrors match the contents on the master mirror. >> While you may use them to quickly verify whether what you have >> downloaded matches what we have on our central storage system, you >> should still use the GPG web of trust to verify whether the release >> tarball actually matches what the kernel developer published." - >> https://www.kernel.org/category/signatures.html >> >> Begin forwarded message: >> >> Date: Thu, 11 Jun 2015 01:25:50 +0200 (CEST) >> From: Thomas Gleixner >> To: Stéphane ancelot >> Cc: Romain Perier, linux-rt-users@vger.kernel.org >> Subject: Re: rt patch >> >> [snip] >> >>> here is an example with linux-3.18.13 and patch 3.18.13-rt10: >>> 3.18.13-rt10 >>> >>> zcat ../patches-3.18.13-rt10.tar.gz |patch -p1 --dry-run >> >> You are trying to apply a tarball of patches instead of a single >> combined patch. Use patch-3.18.13-rt10.gz instead. >> [snip] >> -- >> To unsubscribe from this list: send the line "unsubscribe >> linux-rt-users" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> > Ok, I checked, > > signatures are right. files well downloaded. > > I have always mistake while patching. software release problems? > > unxz version 4.999.9beta > patch version 2.6 > -- > To unsubscribe from this list: send the line "unsubscribe > linux-rt-users" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: rt patch 2015-06-11 9:06 ` Stéphane ancelot @ 2015-06-11 11:03 ` Thomas Gleixner 2015-06-11 11:21 ` Stéphane ancelot 2015-06-11 11:26 ` Stéphane ancelot 0 siblings, 2 replies; 16+ messages in thread From: Thomas Gleixner @ 2015-06-11 11:03 UTC (permalink / raw) To: Stéphane ancelot; +Cc: Ralf Mardorf, linux-rt users [-- Attachment #1: Type: TEXT/PLAIN, Size: 757 bytes --] On Thu, 11 Jun 2015, Stéphane ancelot wrote: > Using a more recent system, I have following mistakes: > trying to patch a file not present in the kernel. > Sincerely, I do not understand what is the problem ! Ok. This is the last attempt to help you. I told you before, that: > > > > zcat ../patches-3.18.13-rt10.tar.gz |patch -p1 --dry-run > > > > > > You are trying to apply a tarball of patches instead of a single > > > combined patch. Use patch-3.18.13-rt10.patch.gz instead. https://www.kernel.org/pub/linux/kernel/projects/rt/3.18/patch-3.18.13-rt10.patch.gz This file can be applied with "patch -p1" after decompression. The tarball, which you are trying to use contains a series of patches and CANNOT be applied with patch. Thanks, tglx ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: rt patch 2015-06-11 11:03 ` Thomas Gleixner @ 2015-06-11 11:21 ` Stéphane ancelot 2015-06-11 11:23 ` Stéphane ancelot 2015-06-11 11:26 ` Stéphane ancelot 1 sibling, 1 reply; 16+ messages in thread From: Stéphane ancelot @ 2015-06-11 11:21 UTC (permalink / raw) To: Thomas Gleixner; +Cc: Ralf Mardorf, linux-rt users On 11/06/2015 13:03, Thomas Gleixner wrote: > On Thu, 11 Jun 2015, Stéphane ancelot wrote: > >> Using a more recent system, I have following mistakes: >> trying to patch a file not present in the kernel. >> Sincerely, I do not understand what is the problem ! > > Ok. This is the last attempt to help you. I told you before, that: > >>>>> zcat ../patches-3.18.13-rt10.tar.gz |patch -p1 --dry-run >>>> >>>> You are trying to apply a tarball of patches instead of a single >>>> combined patch. Use patch-3.18.13-rt10.patch.gz instead. > > https://www.kernel.org/pub/linux/kernel/projects/rt/3.18/patch-3.18.13-rt10.patch.gz > > This file can be applied with "patch -p1" after decompression. > > The tarball, which you are trying to use contains a series of patches > and CANNOT be applied with patch. > > Thanks, > > tglx > Yes, I tried using this patch too. And the kernel was downloaded here : https://www.kernel.org/pub/linux/kernel/v3.x/linux-3.18.13.tar.xz note: using ftp://ftp.kernel.org does not reply Regards, S.Ancelot -- To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: rt patch 2015-06-11 11:21 ` Stéphane ancelot @ 2015-06-11 11:23 ` Stéphane ancelot 0 siblings, 0 replies; 16+ messages in thread From: Stéphane ancelot @ 2015-06-11 11:23 UTC (permalink / raw) To: Thomas Gleixner; +Cc: Ralf Mardorf, linux-rt users On 11/06/2015 13:21, Stéphane ancelot wrote: > On 11/06/2015 13:03, Thomas Gleixner wrote: >> On Thu, 11 Jun 2015, Stéphane ancelot wrote: >> >>> Using a more recent system, I have following mistakes: >>> trying to patch a file not present in the kernel. >>> Sincerely, I do not understand what is the problem ! >> >> Ok. This is the last attempt to help you. I told you before, that: >> >>>>>> zcat ../patches-3.18.13-rt10.tar.gz |patch -p1 --dry-run >>>>> >>>>> You are trying to apply a tarball of patches instead of a single >>>>> combined patch. Use patch-3.18.13-rt10.patch.gz instead. >> >> https://www.kernel.org/pub/linux/kernel/projects/rt/3.18/patch-3.18.13-rt10.patch.gz >> I gave it a try . YES !!! this one rocks ! >> >> This file can be applied with "patch -p1" after decompression. >> >> The tarball, which you are trying to use contains a series of patches >> and CANNOT be applied with patch. >> >> Thanks, >> >> tglx >> > Yes, I tried using this patch too. And the kernel was downloaded here : > https://www.kernel.org/pub/linux/kernel/v3.x/linux-3.18.13.tar.xz > > note: using ftp://ftp.kernel.org does not reply > > Regards, > S.Ancelot -- To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: rt patch 2015-06-11 11:03 ` Thomas Gleixner 2015-06-11 11:21 ` Stéphane ancelot @ 2015-06-11 11:26 ` Stéphane ancelot 1 sibling, 0 replies; 16+ messages in thread From: Stéphane ancelot @ 2015-06-11 11:26 UTC (permalink / raw) To: Thomas Gleixner; +Cc: Ralf Mardorf, linux-rt users THANKS GUYS IT IS SOLVED. On 11/06/2015 13:03, Thomas Gleixner wrote: > On Thu, 11 Jun 2015, Stéphane ancelot wrote: > >> Using a more recent system, I have following mistakes: >> trying to patch a file not present in the kernel. >> Sincerely, I do not understand what is the problem ! > > Ok. This is the last attempt to help you. I told you before, that: > >>>>> zcat ../patches-3.18.13-rt10.tar.gz |patch -p1 --dry-run >>>> >>>> You are trying to apply a tarball of patches instead of a single >>>> combined patch. Use patch-3.18.13-rt10.patch.gz instead. > > https://www.kernel.org/pub/linux/kernel/projects/rt/3.18/patch-3.18.13-rt10.patch.gz > > This file can be applied with "patch -p1" after decompression. > > The tarball, which you are trying to use contains a series of patches > and CANNOT be applied with patch. > > Thanks, > > tglx > -- To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: rt patch 2015-06-10 6:58 ` Stéphane ancelot 2015-06-10 14:40 ` Joe Korty @ 2015-06-10 23:25 ` Thomas Gleixner 1 sibling, 0 replies; 16+ messages in thread From: Thomas Gleixner @ 2015-06-10 23:25 UTC (permalink / raw) To: Stéphane ancelot; +Cc: Romain Perier, linux-rt-users [-- Attachment #1: Type: TEXT/PLAIN, Size: 379 bytes --] On Wed, 10 Jun 2015, Stéphane ancelot wrote: Please: - Do not top post - Trim your replies > here is an example with linux-3.18.13 and patch 3.18.13-rt10: > 3.18.13-rt10 > > zcat ../patches-3.18.13-rt10.tar.gz |patch -p1 --dry-run You are trying to apply a tarball of patches instead of a single combined patch. Use patch-3.18.13-rt10.gz instead. Thanks, tglx ^ permalink raw reply [flat|nested] 16+ messages in thread
* RT patch @ 2005-08-24 22:32 George Anzinger 0 siblings, 0 replies; 16+ messages in thread From: George Anzinger @ 2005-08-24 22:32 UTC (permalink / raw) To: lkml, Ingo Molnar Ingo, Do you keep the RT patch as one slab or is it a series of patches (presumably managed by quilt)? If the latter, could you make a break out available, much as Andrew does for the mm kernels? This would make it much easier to isolate the various "neat" things and, possibly, send them on to Andrew/ Linus or where ever. -- George Anzinger george@mvista.com HRT (High-res-timers): http://sourceforge.net/projects/high-res-timers/ ^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2015-06-11 11:30 UTC | newest] Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2015-06-09 14:47 rt patch Stéphane ancelot 2015-06-09 15:12 ` Romain Perier 2015-06-10 6:44 ` Stéphane ancelot 2015-06-10 6:50 ` Romain Perier 2015-06-10 6:58 ` Stéphane ancelot 2015-06-10 14:40 ` Joe Korty [not found] ` <00f101d0a394$d66f73a0$834e5ae0$@pont@sdcsystems.com> 2015-06-11 6:23 ` Stéphane ancelot 2015-06-11 8:19 ` Ralf Mardorf 2015-06-11 8:51 ` Stéphane ancelot 2015-06-11 9:06 ` Stéphane ancelot 2015-06-11 11:03 ` Thomas Gleixner 2015-06-11 11:21 ` Stéphane ancelot 2015-06-11 11:23 ` Stéphane ancelot 2015-06-11 11:26 ` Stéphane ancelot 2015-06-10 23:25 ` Thomas Gleixner -- strict thread matches above, loose matches on Subject: below -- 2005-08-24 22:32 RT patch George Anzinger
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.