From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> To: horms@verge.net.au, linux-renesas-soc@vger.kernel.org, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, devicetree@vger.kernel.org Cc: magnus.damm@gmail.com, linux@arm.linux.org.uk, linux-arm-kernel@lists.infradead.org Subject: [PATCH] ARM: dts: porter: add MAX3355 support Date: Wed, 27 Jan 2016 01:14:21 +0300 [thread overview] Message-ID: <4506196.xOgpYRO52t@wasted.cogentembedded.com> (raw) In-Reply-To: <1674850.BZpGW9kEud@wasted.cogentembedded.com> Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings are upstream along with the 'extcon' hook in the Renesas USBHS driver, we can add MAX3355 device node to the Porter device tree and properly refer to it from the USBHS node instead of using "renesas,enable-gpio" property which only allowed checking the USB ID pin at the driver probe time; now this pin's state can be monitored dynamically! Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> --- This patch is against 'renesas-devel-20160126-v4.5-rc1' tag of Simon Horman's 'renesas.git' repo. arch/arm/boot/dts/r8a7791-porter.dts | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts =================================================================== --- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts +++ renesas/arch/arm/boot/dts/r8a7791-porter.dts @@ -90,6 +90,12 @@ 1800000 0>; }; + max3355: usb-otg { + compatible = "maxim,max3355"; + maxim,shdn-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>; + id-gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; + }; + hdmi-out { compatible = "hdmi-connector"; type = "a"; @@ -394,7 +400,7 @@ pinctrl-names = "default"; status = "okay"; - renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>; + extcon = <&max3355>; }; &usbphy {
WARNING: multiple messages have this Message-ID (diff)
From: sergei.shtylyov@cogentembedded.com (Sergei Shtylyov) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH] ARM: dts: porter: add MAX3355 support Date: Wed, 27 Jan 2016 01:14:21 +0300 [thread overview] Message-ID: <4506196.xOgpYRO52t@wasted.cogentembedded.com> (raw) In-Reply-To: <1674850.BZpGW9kEud@wasted.cogentembedded.com> Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings are upstream along with the 'extcon' hook in the Renesas USBHS driver, we can add MAX3355 device node to the Porter device tree and properly refer to it from the USBHS node instead of using "renesas,enable-gpio" property which only allowed checking the USB ID pin at the driver probe time; now this pin's state can be monitored dynamically! Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> --- This patch is against 'renesas-devel-20160126-v4.5-rc1' tag of Simon Horman's 'renesas.git' repo. arch/arm/boot/dts/r8a7791-porter.dts | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts =================================================================== --- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts +++ renesas/arch/arm/boot/dts/r8a7791-porter.dts @@ -90,6 +90,12 @@ 1800000 0>; }; + max3355: usb-otg { + compatible = "maxim,max3355"; + maxim,shdn-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>; + id-gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; + }; + hdmi-out { compatible = "hdmi-connector"; type = "a"; @@ -394,7 +400,7 @@ pinctrl-names = "default"; status = "okay"; - renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>; + extcon = <&max3355>; }; &usbphy {
next prev parent reply other threads:[~2016-01-26 22:14 UTC|newest] Thread overview: 108+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-10-08 19:53 [PATCH v4 0/2] Add HS-USB device tree support for R8A7790/Lager board Sergei Shtylyov 2014-10-08 19:53 ` Sergei Shtylyov 2014-10-08 19:53 ` Sergei Shtylyov 2014-10-08 19:54 ` [PATCH v4 1/2] ARM: shmobile: r8a7790: add HS-USB device node Sergei Shtylyov 2014-10-08 19:54 ` Sergei Shtylyov 2014-10-08 19:54 ` Sergei Shtylyov 2014-10-08 19:55 ` [PATCH v4 2/2] ARM: shmobile: lager: enable HS-USB Sergei Shtylyov 2014-10-08 19:55 ` Sergei Shtylyov 2014-10-08 19:55 ` Sergei Shtylyov 2014-10-24 5:09 ` [PATCH v4 0/2] Add HS-USB device tree support for R8A7790/Lager board Simon Horman 2014-10-24 5:09 ` Simon Horman 2014-10-24 5:09 ` Simon Horman 2014-10-24 5:22 ` Yoshihiro Shimoda 2014-10-24 5:22 ` Yoshihiro Shimoda 2014-10-24 5:22 ` Yoshihiro Shimoda 2015-09-16 23:53 ` [PATCH] ARM: shmobile: r8a7794: add HS-USB DT support Sergei Shtylyov 2015-09-16 23:53 ` Sergei Shtylyov 2015-09-16 23:53 ` Sergei Shtylyov 2015-10-05 3:02 ` Simon Horman 2015-10-05 3:02 ` Simon Horman 2015-10-05 3:02 ` Simon Horman 2015-10-14 19:35 ` [PATCH] ARM: shmobile: porter: " Sergei Shtylyov 2015-10-14 19:35 ` Sergei Shtylyov 2015-10-14 19:35 ` Sergei Shtylyov 2015-10-15 0:18 ` Simon Horman 2015-10-15 0:18 ` Simon Horman 2015-10-15 0:18 ` Simon Horman 2015-10-15 10:27 ` Sergei Shtylyov 2015-10-15 10:27 ` Sergei Shtylyov 2015-10-15 10:27 ` Sergei Shtylyov 2015-10-27 21:03 ` [PATCH] ARM: shmobile: porter: add CAN0 " Sergei Shtylyov 2015-10-27 21:03 ` Sergei Shtylyov 2015-10-27 21:03 ` Sergei Shtylyov 2015-10-27 22:41 ` Simon Horman 2015-10-27 22:41 ` Simon Horman 2015-10-27 22:41 ` Simon Horman 2015-10-27 22:56 ` Sergei Shtylyov 2015-10-27 22:56 ` Sergei Shtylyov 2015-10-27 22:56 ` Sergei Shtylyov 2015-12-24 22:45 ` [PATCH] ARM: shmobile: porter: add DU " Sergei Shtylyov 2015-12-24 22:45 ` Sergei Shtylyov 2015-12-24 22:45 ` Sergei Shtylyov 2015-12-28 5:29 ` Simon Horman 2015-12-28 5:29 ` Simon Horman 2015-12-28 5:29 ` Simon Horman 2015-12-28 14:35 ` Sergei Shtylyov 2015-12-28 14:35 ` Sergei Shtylyov 2015-12-28 14:35 ` Sergei Shtylyov 2015-12-28 21:43 ` Simon Horman 2015-12-28 21:43 ` Simon Horman 2015-12-28 21:43 ` Simon Horman 2016-01-12 23:06 ` [PATCH] ARM: shmobile: silk: " Sergei Shtylyov 2016-01-12 23:06 ` Sergei Shtylyov 2016-01-12 23:06 ` Sergei Shtylyov 2016-01-18 1:41 ` Simon Horman 2016-01-18 1:41 ` Simon Horman 2016-01-18 1:41 ` Simon Horman 2016-01-21 22:36 ` [PATCH] ARM: dts: porter: add sound support Sergei Shtylyov 2016-01-21 22:36 ` Sergei Shtylyov 2016-01-25 0:35 ` Kuninori Morimoto 2016-01-25 0:35 ` Kuninori Morimoto 2016-01-25 0:35 ` Kuninori Morimoto 2016-01-26 0:43 ` Simon Horman 2016-01-26 0:43 ` Simon Horman 2016-01-26 14:31 ` Sergei Shtylyov 2016-01-26 14:31 ` Sergei Shtylyov 2016-01-26 22:14 ` Sergei Shtylyov [this message] 2016-01-26 22:14 ` [PATCH] ARM: dts: porter: add MAX3355 support Sergei Shtylyov 2016-01-28 5:49 ` Yoshihiro Shimoda 2016-01-28 5:49 ` Yoshihiro Shimoda 2016-01-29 20:28 ` Sergei Shtylyov 2016-01-29 20:28 ` Sergei Shtylyov 2016-01-29 20:49 ` Sergei Shtylyov 2016-01-29 20:49 ` Sergei Shtylyov 2016-02-01 11:17 ` Yoshihiro Shimoda 2016-02-01 11:17 ` Yoshihiro Shimoda 2016-02-01 17:54 ` Sergei Shtylyov 2016-02-01 17:54 ` Sergei Shtylyov 2016-02-01 19:00 ` Sergei Shtylyov 2016-02-01 19:00 ` Sergei Shtylyov 2016-02-15 1:45 ` Simon Horman 2016-02-15 1:45 ` Simon Horman 2016-02-15 10:59 ` Sergei Shtylyov 2016-02-15 10:59 ` Sergei Shtylyov 2016-02-11 20:26 ` [PATCH] ARM: dts: silk: add sound support Sergei Shtylyov 2016-02-11 20:26 ` Sergei Shtylyov 2016-02-15 4:56 ` Kuninori Morimoto 2016-02-15 4:56 ` Kuninori Morimoto 2016-02-15 4:56 ` Kuninori Morimoto 2016-02-11 21:49 ` [PATCH] ARM: dts: porter: fix JP3 jumper description Sergei Shtylyov 2016-02-11 21:49 ` Sergei Shtylyov 2016-02-15 4:50 ` Kuninori Morimoto 2016-02-15 4:50 ` Kuninori Morimoto 2016-02-15 4:50 ` Kuninori Morimoto 2016-02-15 21:55 ` Simon Horman 2016-02-15 21:55 ` Simon Horman 2016-02-13 22:26 ` [PATCH] ARM: dts: porter: remove enable prop from HS-USB device node Sergei Shtylyov 2016-02-13 22:26 ` Sergei Shtylyov 2016-02-26 19:43 ` Sergei Shtylyov 2016-02-26 19:43 ` Sergei Shtylyov 2016-03-02 0:47 ` Simon Horman 2016-03-02 0:47 ` Simon Horman 2016-04-13 19:36 ` [PATCH] ARM: dts: silk: add DU pins Sergei Shtylyov 2016-04-13 19:36 ` Sergei Shtylyov 2016-06-17 20:53 ` Sergei Shtylyov 2016-06-17 20:53 ` Sergei Shtylyov 2016-06-20 8:35 ` Simon Horman 2016-06-20 8:35 ` Simon Horman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=4506196.xOgpYRO52t@wasted.cogentembedded.com \ --to=sergei.shtylyov@cogentembedded.com \ --cc=devicetree@vger.kernel.org \ --cc=galak@codeaurora.org \ --cc=horms@verge.net.au \ --cc=ijc+devicetree@hellion.org.uk \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=linux@arm.linux.org.uk \ --cc=magnus.damm@gmail.com \ --cc=mark.rutland@arm.com \ --cc=pawel.moll@arm.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.