All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
To: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: horms@verge.net.au, linux-renesas-soc@vger.kernel.org,
	robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
	ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
	devicetree@vger.kernel.org, magnus.damm@gmail.com,
	linux@arm.linux.org.uk, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] ARM: dts: silk: add sound support
Date: Mon, 15 Feb 2016 04:56:03 +0000	[thread overview]
Message-ID: <87egceiniu.wl%kuninori.morimoto.gx@renesas.com> (raw)
In-Reply-To: <4246644.0ZLx3MiCIL@wasted.cogentembedded.com>

Hi

> Define the SILK board dependent part of the R8A7794 sound  device node.
> Add device node for Asahi Kasei AK4643 stereo codec to the I2C1 bus.
> Add the "simple-audio-card" device node to interconnect the SoC sound
> device  and the codec.
> 
> This patch is based on the commit 493b4da7c10c ("ARM: dts: porter: add
> sound support").
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> ---
> This patch is against the 'renesas-devel-20160209-v4.5-rc3' tag of Simon
> Horman's 'renesas.git' repo. It depends on the 5 R8A7794 sound support patches
> in posted earlier this week  in order to build and the R8A7794 PFC driver
> patches posted yesterday in  order  for  the pins to be properly configured
> (but works without the pins  configured  too)...

Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch doesn't use SRC, and it is no problem.
We need fixup src.c driver for r8a7794 because it lacks some SRCs.


>  arch/arm/boot/dts/r8a7794-silk.dts |   71 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 71 insertions(+)
> 
> Index: renesas/arch/arm/boot/dts/r8a7794-silk.dts
> ===================================================================
> --- renesas.orig/arch/arm/boot/dts/r8a7794-silk.dts
> +++ renesas/arch/arm/boot/dts/r8a7794-silk.dts
> @@ -10,6 +10,17 @@
>   * kind, whether express or implied.
>   */
>  
> +/*
> + * SSI-AK4643
> + *
> + * SW1: 2-1: AK4643
> + *      2-3: ADV7511
> + *
> + * This command is required before playback/capture:
> + *
> + *	amixer set "LINEOUT Mixer DACL" on
> + */
> +
>  /dts-v1/;
>  #include "r8a7794.dtsi"
>  #include <dt-bindings/gpio/gpio.h>
> @@ -119,6 +130,30 @@
>  		#clock-cells = <0>;
>  		clock-frequency = <74250000>;
>  	};
> +
> +	x9_clk: x9-clock {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <12288000>;
> +		clock-output-names = "audio_clock";
> +	};
> +
> +	sound {
> +		compatible = "simple-audio-card";
> +
> +		simple-audio-card,format = "left_j";
> +		simple-audio-card,bitclock-master = <&soundcodec>;
> +		simple-audio-card,frame-master = <&soundcodec>;
> +
> +		simple-audio-card,cpu {
> +			sound-dai = <&rcar_sound>;
> +		};
> +
> +		soundcodec: simple-audio-card,codec {
> +			sound-dai = <&ak4643>;
> +			clocks = <&x9_clk>;
> +		};
> +	};
>  };
>  
>  &extal_clk {
> @@ -183,6 +218,16 @@
>  		renesas,groups = "usb1";
>  		renesas,function = "usb1";
>  	};
> +
> +	ssi_pins: sound {
> +		renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
> +		renesas,function = "ssi";
> +	};
> +
> +	audio_clk_pins: audio_clk {
> +		renesas,groups = "audio_clkc";
> +		renesas,function = "audio_clk";
> +	};
>  };
>  
>  &scif2 {
> @@ -220,6 +265,12 @@
>  	status = "okay";
>  	clock-frequency = <400000>;
>  
> +	ak4643: codec@12 {
> +		compatible = "asahi-kasei,ak4643";
> +		#sound-dai-cells = <0>;
> +		reg = <0x12>;
> +	};
> +
>  	composite-in@20 {
>  		compatible = "adi,adv7180";
>  		reg = <0x20>;
> @@ -380,3 +431,23 @@
>  		};
>  	};
>  };
> +
> +&rcar_sound {
> +	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +
> +	/* Single DAI */
> +	#sound-dai-cells = <0>;
> +
> +	rcar_sound,dai {
> +		dai0 {
> +			playback = <&ssi0>;
> +			capture  = <&ssi1>;
> +		};
> +	};
> +};
> +
> +&ssi1 {
> +	shared-pin;
> +};
> 

WARNING: multiple messages have this Message-ID (diff)
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
To: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: <horms@verge.net.au>, <linux-renesas-soc@vger.kernel.org>,
	<robh+dt@kernel.org>, <pawel.moll@arm.com>,
	<mark.rutland@arm.com>, <ijc+devicetree@hellion.org.uk>,
	<galak@codeaurora.org>, <devicetree@vger.kernel.org>,
	<magnus.damm@gmail.com>, <linux@arm.linux.org.uk>,
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH] ARM: dts: silk: add sound support
Date: Mon, 15 Feb 2016 04:56:03 +0000	[thread overview]
Message-ID: <87egceiniu.wl%kuninori.morimoto.gx@renesas.com> (raw)
In-Reply-To: <4246644.0ZLx3MiCIL@wasted.cogentembedded.com>

Hi

> Define the SILK board dependent part of the R8A7794 sound  device node.
> Add device node for Asahi Kasei AK4643 stereo codec to the I2C1 bus.
> Add the "simple-audio-card" device node to interconnect the SoC sound
> device  and the codec.
> 
> This patch is based on the commit 493b4da7c10c ("ARM: dts: porter: add
> sound support").
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> ---
> This patch is against the 'renesas-devel-20160209-v4.5-rc3' tag of Simon
> Horman's 'renesas.git' repo. It depends on the 5 R8A7794 sound support patches
> in posted earlier this week  in order to build and the R8A7794 PFC driver
> patches posted yesterday in  order  for  the pins to be properly configured
> (but works without the pins  configured  too)...

Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch doesn't use SRC, and it is no problem.
We need fixup src.c driver for r8a7794 because it lacks some SRCs.


>  arch/arm/boot/dts/r8a7794-silk.dts |   71 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 71 insertions(+)
> 
> Index: renesas/arch/arm/boot/dts/r8a7794-silk.dts
> ===================================================================
> --- renesas.orig/arch/arm/boot/dts/r8a7794-silk.dts
> +++ renesas/arch/arm/boot/dts/r8a7794-silk.dts
> @@ -10,6 +10,17 @@
>   * kind, whether express or implied.
>   */
>  
> +/*
> + * SSI-AK4643
> + *
> + * SW1: 2-1: AK4643
> + *      2-3: ADV7511
> + *
> + * This command is required before playback/capture:
> + *
> + *	amixer set "LINEOUT Mixer DACL" on
> + */
> +
>  /dts-v1/;
>  #include "r8a7794.dtsi"
>  #include <dt-bindings/gpio/gpio.h>
> @@ -119,6 +130,30 @@
>  		#clock-cells = <0>;
>  		clock-frequency = <74250000>;
>  	};
> +
> +	x9_clk: x9-clock {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <12288000>;
> +		clock-output-names = "audio_clock";
> +	};
> +
> +	sound {
> +		compatible = "simple-audio-card";
> +
> +		simple-audio-card,format = "left_j";
> +		simple-audio-card,bitclock-master = <&soundcodec>;
> +		simple-audio-card,frame-master = <&soundcodec>;
> +
> +		simple-audio-card,cpu {
> +			sound-dai = <&rcar_sound>;
> +		};
> +
> +		soundcodec: simple-audio-card,codec {
> +			sound-dai = <&ak4643>;
> +			clocks = <&x9_clk>;
> +		};
> +	};
>  };
>  
>  &extal_clk {
> @@ -183,6 +218,16 @@
>  		renesas,groups = "usb1";
>  		renesas,function = "usb1";
>  	};
> +
> +	ssi_pins: sound {
> +		renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
> +		renesas,function = "ssi";
> +	};
> +
> +	audio_clk_pins: audio_clk {
> +		renesas,groups = "audio_clkc";
> +		renesas,function = "audio_clk";
> +	};
>  };
>  
>  &scif2 {
> @@ -220,6 +265,12 @@
>  	status = "okay";
>  	clock-frequency = <400000>;
>  
> +	ak4643: codec@12 {
> +		compatible = "asahi-kasei,ak4643";
> +		#sound-dai-cells = <0>;
> +		reg = <0x12>;
> +	};
> +
>  	composite-in@20 {
>  		compatible = "adi,adv7180";
>  		reg = <0x20>;
> @@ -380,3 +431,23 @@
>  		};
>  	};
>  };
> +
> +&rcar_sound {
> +	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +
> +	/* Single DAI */
> +	#sound-dai-cells = <0>;
> +
> +	rcar_sound,dai {
> +		dai0 {
> +			playback = <&ssi0>;
> +			capture  = <&ssi1>;
> +		};
> +	};
> +};
> +
> +&ssi1 {
> +	shared-pin;
> +};
> 

WARNING: multiple messages have this Message-ID (diff)
From: kuninori.morimoto.gx@renesas.com (Kuninori Morimoto)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: silk: add sound support
Date: Mon, 15 Feb 2016 04:56:03 +0000	[thread overview]
Message-ID: <87egceiniu.wl%kuninori.morimoto.gx@renesas.com> (raw)
In-Reply-To: <4246644.0ZLx3MiCIL@wasted.cogentembedded.com>

Hi

> Define the SILK board dependent part of the R8A7794 sound  device node.
> Add device node for Asahi Kasei AK4643 stereo codec to the I2C1 bus.
> Add the "simple-audio-card" device node to interconnect the SoC sound
> device  and the codec.
> 
> This patch is based on the commit 493b4da7c10c ("ARM: dts: porter: add
> sound support").
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> ---
> This patch is against the 'renesas-devel-20160209-v4.5-rc3' tag of Simon
> Horman's 'renesas.git' repo. It depends on the 5 R8A7794 sound support patches
> in posted earlier this week  in order to build and the R8A7794 PFC driver
> patches posted yesterday in  order  for  the pins to be properly configured
> (but works without the pins  configured  too)...

Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch doesn't use SRC, and it is no problem.
We need fixup src.c driver for r8a7794 because it lacks some SRCs.


>  arch/arm/boot/dts/r8a7794-silk.dts |   71 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 71 insertions(+)
> 
> Index: renesas/arch/arm/boot/dts/r8a7794-silk.dts
> ===================================================================
> --- renesas.orig/arch/arm/boot/dts/r8a7794-silk.dts
> +++ renesas/arch/arm/boot/dts/r8a7794-silk.dts
> @@ -10,6 +10,17 @@
>   * kind, whether express or implied.
>   */
>  
> +/*
> + * SSI-AK4643
> + *
> + * SW1: 2-1: AK4643
> + *      2-3: ADV7511
> + *
> + * This command is required before playback/capture:
> + *
> + *	amixer set "LINEOUT Mixer DACL" on
> + */
> +
>  /dts-v1/;
>  #include "r8a7794.dtsi"
>  #include <dt-bindings/gpio/gpio.h>
> @@ -119,6 +130,30 @@
>  		#clock-cells = <0>;
>  		clock-frequency = <74250000>;
>  	};
> +
> +	x9_clk: x9-clock {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <12288000>;
> +		clock-output-names = "audio_clock";
> +	};
> +
> +	sound {
> +		compatible = "simple-audio-card";
> +
> +		simple-audio-card,format = "left_j";
> +		simple-audio-card,bitclock-master = <&soundcodec>;
> +		simple-audio-card,frame-master = <&soundcodec>;
> +
> +		simple-audio-card,cpu {
> +			sound-dai = <&rcar_sound>;
> +		};
> +
> +		soundcodec: simple-audio-card,codec {
> +			sound-dai = <&ak4643>;
> +			clocks = <&x9_clk>;
> +		};
> +	};
>  };
>  
>  &extal_clk {
> @@ -183,6 +218,16 @@
>  		renesas,groups = "usb1";
>  		renesas,function = "usb1";
>  	};
> +
> +	ssi_pins: sound {
> +		renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
> +		renesas,function = "ssi";
> +	};
> +
> +	audio_clk_pins: audio_clk {
> +		renesas,groups = "audio_clkc";
> +		renesas,function = "audio_clk";
> +	};
>  };
>  
>  &scif2 {
> @@ -220,6 +265,12 @@
>  	status = "okay";
>  	clock-frequency = <400000>;
>  
> +	ak4643: codec at 12 {
> +		compatible = "asahi-kasei,ak4643";
> +		#sound-dai-cells = <0>;
> +		reg = <0x12>;
> +	};
> +
>  	composite-in at 20 {
>  		compatible = "adi,adv7180";
>  		reg = <0x20>;
> @@ -380,3 +431,23 @@
>  		};
>  	};
>  };
> +
> +&rcar_sound {
> +	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +
> +	/* Single DAI */
> +	#sound-dai-cells = <0>;
> +
> +	rcar_sound,dai {
> +		dai0 {
> +			playback = <&ssi0>;
> +			capture  = <&ssi1>;
> +		};
> +	};
> +};
> +
> +&ssi1 {
> +	shared-pin;
> +};
> 

  reply	other threads:[~2016-02-15  4:56 UTC|newest]

Thread overview: 108+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-08 19:53 [PATCH v4 0/2] Add HS-USB device tree support for R8A7790/Lager board Sergei Shtylyov
2014-10-08 19:53 ` Sergei Shtylyov
2014-10-08 19:53 ` Sergei Shtylyov
2014-10-08 19:54 ` [PATCH v4 1/2] ARM: shmobile: r8a7790: add HS-USB device node Sergei Shtylyov
2014-10-08 19:54   ` Sergei Shtylyov
2014-10-08 19:54   ` Sergei Shtylyov
2014-10-08 19:55 ` [PATCH v4 2/2] ARM: shmobile: lager: enable HS-USB Sergei Shtylyov
2014-10-08 19:55   ` Sergei Shtylyov
2014-10-08 19:55   ` Sergei Shtylyov
2014-10-24  5:09 ` [PATCH v4 0/2] Add HS-USB device tree support for R8A7790/Lager board Simon Horman
2014-10-24  5:09   ` Simon Horman
2014-10-24  5:09   ` Simon Horman
2014-10-24  5:22   ` Yoshihiro Shimoda
2014-10-24  5:22     ` Yoshihiro Shimoda
2014-10-24  5:22     ` Yoshihiro Shimoda
2015-09-16 23:53 ` [PATCH] ARM: shmobile: r8a7794: add HS-USB DT support Sergei Shtylyov
2015-09-16 23:53   ` Sergei Shtylyov
2015-09-16 23:53   ` Sergei Shtylyov
2015-10-05  3:02   ` Simon Horman
2015-10-05  3:02     ` Simon Horman
2015-10-05  3:02     ` Simon Horman
2015-10-14 19:35 ` [PATCH] ARM: shmobile: porter: " Sergei Shtylyov
2015-10-14 19:35   ` Sergei Shtylyov
2015-10-14 19:35   ` Sergei Shtylyov
2015-10-15  0:18   ` Simon Horman
2015-10-15  0:18     ` Simon Horman
2015-10-15  0:18     ` Simon Horman
2015-10-15 10:27     ` Sergei Shtylyov
2015-10-15 10:27       ` Sergei Shtylyov
2015-10-15 10:27       ` Sergei Shtylyov
2015-10-27 21:03 ` [PATCH] ARM: shmobile: porter: add CAN0 " Sergei Shtylyov
2015-10-27 21:03   ` Sergei Shtylyov
2015-10-27 21:03   ` Sergei Shtylyov
2015-10-27 22:41   ` Simon Horman
2015-10-27 22:41     ` Simon Horman
2015-10-27 22:41     ` Simon Horman
2015-10-27 22:56     ` Sergei Shtylyov
2015-10-27 22:56       ` Sergei Shtylyov
2015-10-27 22:56       ` Sergei Shtylyov
2015-12-24 22:45 ` [PATCH] ARM: shmobile: porter: add DU " Sergei Shtylyov
2015-12-24 22:45   ` Sergei Shtylyov
2015-12-24 22:45   ` Sergei Shtylyov
2015-12-28  5:29   ` Simon Horman
2015-12-28  5:29     ` Simon Horman
2015-12-28  5:29     ` Simon Horman
2015-12-28 14:35     ` Sergei Shtylyov
2015-12-28 14:35       ` Sergei Shtylyov
2015-12-28 14:35       ` Sergei Shtylyov
2015-12-28 21:43       ` Simon Horman
2015-12-28 21:43         ` Simon Horman
2015-12-28 21:43         ` Simon Horman
2016-01-12 23:06 ` [PATCH] ARM: shmobile: silk: " Sergei Shtylyov
2016-01-12 23:06   ` Sergei Shtylyov
2016-01-12 23:06   ` Sergei Shtylyov
2016-01-18  1:41   ` Simon Horman
2016-01-18  1:41     ` Simon Horman
2016-01-18  1:41     ` Simon Horman
2016-01-21 22:36 ` [PATCH] ARM: dts: porter: add sound support Sergei Shtylyov
2016-01-21 22:36   ` Sergei Shtylyov
2016-01-25  0:35   ` Kuninori Morimoto
2016-01-25  0:35     ` Kuninori Morimoto
2016-01-25  0:35     ` Kuninori Morimoto
2016-01-26  0:43     ` Simon Horman
2016-01-26  0:43       ` Simon Horman
2016-01-26 14:31     ` Sergei Shtylyov
2016-01-26 14:31       ` Sergei Shtylyov
2016-01-26 22:14 ` [PATCH] ARM: dts: porter: add MAX3355 support Sergei Shtylyov
2016-01-26 22:14   ` Sergei Shtylyov
2016-01-28  5:49   ` Yoshihiro Shimoda
2016-01-28  5:49     ` Yoshihiro Shimoda
2016-01-29 20:28     ` Sergei Shtylyov
2016-01-29 20:28       ` Sergei Shtylyov
2016-01-29 20:49       ` Sergei Shtylyov
2016-01-29 20:49         ` Sergei Shtylyov
2016-02-01 11:17         ` Yoshihiro Shimoda
2016-02-01 11:17           ` Yoshihiro Shimoda
2016-02-01 17:54           ` Sergei Shtylyov
2016-02-01 17:54             ` Sergei Shtylyov
2016-02-01 19:00             ` Sergei Shtylyov
2016-02-01 19:00               ` Sergei Shtylyov
2016-02-15  1:45               ` Simon Horman
2016-02-15  1:45                 ` Simon Horman
2016-02-15 10:59                 ` Sergei Shtylyov
2016-02-15 10:59                   ` Sergei Shtylyov
2016-02-11 20:26 ` [PATCH] ARM: dts: silk: add sound support Sergei Shtylyov
2016-02-11 20:26   ` Sergei Shtylyov
2016-02-15  4:56   ` Kuninori Morimoto [this message]
2016-02-15  4:56     ` Kuninori Morimoto
2016-02-15  4:56     ` Kuninori Morimoto
2016-02-11 21:49 ` [PATCH] ARM: dts: porter: fix JP3 jumper description Sergei Shtylyov
2016-02-11 21:49   ` Sergei Shtylyov
2016-02-15  4:50   ` Kuninori Morimoto
2016-02-15  4:50     ` Kuninori Morimoto
2016-02-15  4:50     ` Kuninori Morimoto
2016-02-15 21:55     ` Simon Horman
2016-02-15 21:55       ` Simon Horman
2016-02-13 22:26 ` [PATCH] ARM: dts: porter: remove enable prop from HS-USB device node Sergei Shtylyov
2016-02-13 22:26   ` Sergei Shtylyov
2016-02-26 19:43   ` Sergei Shtylyov
2016-02-26 19:43     ` Sergei Shtylyov
2016-03-02  0:47     ` Simon Horman
2016-03-02  0:47       ` Simon Horman
2016-04-13 19:36 ` [PATCH] ARM: dts: silk: add DU pins Sergei Shtylyov
2016-04-13 19:36   ` Sergei Shtylyov
2016-06-17 20:53   ` Sergei Shtylyov
2016-06-17 20:53     ` Sergei Shtylyov
2016-06-20  8:35     ` Simon Horman
2016-06-20  8:35       ` Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87egceiniu.wl%kuninori.morimoto.gx@renesas.com \
    --to=kuninori.morimoto.gx@renesas.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=horms@verge.net.au \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=magnus.damm@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sergei.shtylyov@cogentembedded.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.