* [PATCH v2] local.conf.sample: use https instead of http for SSTATE_MIRRORS [not found] <16CDCBDE8210E458.21331@lists.yoctoproject.org> @ 2022-01-26 10:44 ` Michael Opdenacker 2022-01-26 11:24 ` [poky] " Peter Kjellerstedt 0 siblings, 1 reply; 4+ messages in thread From: Michael Opdenacker @ 2022-01-26 10:44 UTC (permalink / raw) To: poky; +Cc: Michael Opdenacker Both http and https work, but we should get fewer questions with https Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com> --- meta-poky/conf/local.conf.sample | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/meta-poky/conf/local.conf.sample b/meta-poky/conf/local.conf.sample index 7bdbba0..3100eb1 100644 --- a/meta-poky/conf/local.conf.sample +++ b/meta-poky/conf/local.conf.sample @@ -206,7 +206,7 @@ BB_DISKMON_DIRS ??= "\ # used to accelerate build time. This variable can be used to configure the system # to search other mirror locations for these objects before it builds the data itself. # -# This can be a filesystem directory, or a remote url such as http or ftp. These +# This can be a filesystem directory, or a remote url such as https or ftp. These # would contain the sstate-cache results from previous builds (possibly from other # machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the # cache locations to check for the shared objects. @@ -214,7 +214,7 @@ BB_DISKMON_DIRS ??= "\ # at the end as shown in the examples below. This will be substituted with the # correct path within the directory structure. #SSTATE_MIRRORS ?= "\ -#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* https://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" # @@ -229,7 +229,7 @@ BB_DISKMON_DIRS ??= "\ # Note: For this to work you also need hash-equivalence passthrough to the matching server # #BB_HASHSERVE_UPSTREAM = "typhoon.yocto.io:8687" -#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/3.4/PATH;downloadfilename=PATH" +#SSTATE_MIRRORS ?= "file://.* https://sstate.yoctoproject.org/3.4/PATH;downloadfilename=PATH" # # Qemu configuration -- 2.25.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [poky] [PATCH v2] local.conf.sample: use https instead of http for SSTATE_MIRRORS 2022-01-26 10:44 ` [PATCH v2] local.conf.sample: use https instead of http for SSTATE_MIRRORS Michael Opdenacker @ 2022-01-26 11:24 ` Peter Kjellerstedt 2022-01-27 16:11 ` Michael Opdenacker 0 siblings, 1 reply; 4+ messages in thread From: Peter Kjellerstedt @ 2022-01-26 11:24 UTC (permalink / raw) To: Michael Opdenacker, poky > -----Original Message----- > From: poky@lists.yoctoproject.org <poky@lists.yoctoproject.org> On Behalf Of Michael Opdenacker > Sent: den 26 januari 2022 11:44 > To: poky@lists.yoctoproject.org > Cc: Michael Opdenacker <michael.opdenacker@bootlin.com> > Subject: [poky] [PATCH v2] local.conf.sample: use https instead of http for SSTATE_MIRRORS > > Both http and https work, but we should get fewer questions > with https > > Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com> > --- > meta-poky/conf/local.conf.sample | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/meta-poky/conf/local.conf.sample b/meta-poky/conf/local.conf.sample > index 7bdbba0..3100eb1 100644 > --- a/meta-poky/conf/local.conf.sample > +++ b/meta-poky/conf/local.conf.sample > @@ -206,7 +206,7 @@ BB_DISKMON_DIRS ??= "\ > # used to accelerate build time. This variable can be used to configure the system > # to search other mirror locations for these objects before it builds the data itself. > # > -# This can be a filesystem directory, or a remote url such as http or ftp. These > +# This can be a filesystem directory, or a remote url such as https or ftp. These > # would contain the sstate-cache results from previous builds (possibly from other > # machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the > # cache locations to check for the shared objects. > @@ -214,7 +214,7 @@ BB_DISKMON_DIRS ??= "\ > # at the end as shown in the examples below. This will be substituted with the > # correct path within the directory structure. > #SSTATE_MIRRORS ?= "\ > -#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ > +#file://.* https://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ While there, you may as well remove the "\n". > #file://.* file:///some/local/dir/sstate/PATH" > > # > @@ -229,7 +229,7 @@ BB_DISKMON_DIRS ??= "\ > # Note: For this to work you also need hash-equivalence passthrough to the matching server > # > #BB_HASHSERVE_UPSTREAM = "typhoon.yocto.io:8687" > -#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/3.4/PATH;downloadfilename=PATH" > +#SSTATE_MIRRORS ?= "file://.* https://sstate.yoctoproject.org/3.4/PATH;downloadfilename=PATH" > > # > # Qemu configuration > -- > 2.25.1 //Peter ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [poky] [PATCH v2] local.conf.sample: use https instead of http for SSTATE_MIRRORS 2022-01-26 11:24 ` [poky] " Peter Kjellerstedt @ 2022-01-27 16:11 ` Michael Opdenacker 2022-01-27 21:16 ` Peter Kjellerstedt 0 siblings, 1 reply; 4+ messages in thread From: Michael Opdenacker @ 2022-01-27 16:11 UTC (permalink / raw) To: Peter Kjellerstedt, poky Hi Peter, Thank you very much for the review! On 1/26/22 12:24, Peter Kjellerstedt wrote: >> -----Original Message----- >> From: poky@lists.yoctoproject.org <poky@lists.yoctoproject.org> On Behalf Of Michael Opdenacker >> Sent: den 26 januari 2022 11:44 >> To: poky@lists.yoctoproject.org >> Cc: Michael Opdenacker <michael.opdenacker@bootlin.com> >> Subject: [poky] [PATCH v2] local.conf.sample: use https instead of http for SSTATE_MIRRORS >> >> Both http and https work, but we should get fewer questions >> with https >> >> Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com> >> --- >> meta-poky/conf/local.conf.sample | 6 +++--- >> 1 file changed, 3 insertions(+), 3 deletions(-) >> >> diff --git a/meta-poky/conf/local.conf.sample b/meta-poky/conf/local.conf.sample >> index 7bdbba0..3100eb1 100644 >> --- a/meta-poky/conf/local.conf.sample >> +++ b/meta-poky/conf/local.conf.sample >> @@ -206,7 +206,7 @@ BB_DISKMON_DIRS ??= "\ >> # used to accelerate build time. This variable can be used to configure the system >> # to search other mirror locations for these objects before it builds the data itself. >> # >> -# This can be a filesystem directory, or a remote url such as http or ftp. These >> +# This can be a filesystem directory, or a remote url such as https or ftp. These >> # would contain the sstate-cache results from previous builds (possibly from other >> # machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the >> # cache locations to check for the shared objects. >> @@ -214,7 +214,7 @@ BB_DISKMON_DIRS ??= "\ >> # at the end as shown in the examples below. This will be substituted with the >> # correct path within the directory structure. >> #SSTATE_MIRRORS ?= "\ >> -#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ >> +#file://.* https://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ > While there, you may as well remove the "\n". Good idea. We already did that in other places. However, shouldn't it be a separate commit? I can read Quentin's lips ;-) Cheers Michael. -- Michael Opdenacker, Bootlin Embedded Linux and Kernel engineering https://bootlin.com ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [poky] [PATCH v2] local.conf.sample: use https instead of http for SSTATE_MIRRORS 2022-01-27 16:11 ` Michael Opdenacker @ 2022-01-27 21:16 ` Peter Kjellerstedt 0 siblings, 0 replies; 4+ messages in thread From: Peter Kjellerstedt @ 2022-01-27 21:16 UTC (permalink / raw) To: Michael Opdenacker, poky > -----Original Message----- > From: Michael Opdenacker <michael.opdenacker@bootlin.com> > Sent: den 27 januari 2022 17:11 > To: Peter Kjellerstedt <peter.kjellerstedt@axis.com>; > poky@lists.yoctoproject.org > Subject: Re: [poky] [PATCH v2] local.conf.sample: use https instead of > http for SSTATE_MIRRORS > > Hi Peter, > > Thank you very much for the review! > > On 1/26/22 12:24, Peter Kjellerstedt wrote: > >> -----Original Message----- > >> From: poky@lists.yoctoproject.org <poky@lists.yoctoproject.org> On Behalf Of Michael Opdenacker > >> Sent: den 26 januari 2022 11:44 > >> To: poky@lists.yoctoproject.org > >> Cc: Michael Opdenacker <michael.opdenacker@bootlin.com> > >> Subject: [poky] [PATCH v2] local.conf.sample: use https instead of http for SSTATE_MIRRORS > >> > >> Both http and https work, but we should get fewer questions > >> with https > >> > >> Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com> > >> --- > >> meta-poky/conf/local.conf.sample | 6 +++--- > >> 1 file changed, 3 insertions(+), 3 deletions(-) > >> > >> diff --git a/meta-poky/conf/local.conf.sample b/meta-poky/conf/local.conf.sample > >> index 7bdbba0..3100eb1 100644 > >> --- a/meta-poky/conf/local.conf.sample > >> +++ b/meta-poky/conf/local.conf.sample > >> @@ -206,7 +206,7 @@ BB_DISKMON_DIRS ??= "\ > >> # used to accelerate build time. This variable can be used to configure the system > >> # to search other mirror locations for these objects before it builds the data itself. > >> # > >> -# This can be a filesystem directory, or a remote url such as http or ftp. These > >> +# This can be a filesystem directory, or a remote url such as https or ftp. These > >> # would contain the sstate-cache results from previous builds (possibly from other > >> # machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the > >> # cache locations to check for the shared objects. > >> @@ -214,7 +214,7 @@ BB_DISKMON_DIRS ??= "\ > >> # at the end as shown in the examples below. This will be substituted with the > >> # correct path within the directory structure. > >> #SSTATE_MIRRORS ?= "\ > >> -#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ > >> +#file://.* https://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ > > > > While there, you may as well remove the "\n". > > Good idea. We already did that in other places. > However, shouldn't it be a separate commit? I can read Quentin's lips ;-) True. There are a couple of other places that can be updated as well. I'll send a patch. > Cheers > Michael. > > -- > Michael Opdenacker, Bootlin > Embedded Linux and Kernel engineering > https://bootlin.com //Peter ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-01-27 21:16 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <16CDCBDE8210E458.21331@lists.yoctoproject.org> 2022-01-26 10:44 ` [PATCH v2] local.conf.sample: use https instead of http for SSTATE_MIRRORS Michael Opdenacker 2022-01-26 11:24 ` [poky] " Peter Kjellerstedt 2022-01-27 16:11 ` Michael Opdenacker 2022-01-27 21:16 ` Peter Kjellerstedt
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.