* cmipci surround sound front-left plays on lfe @ 2010-09-10 6:55 Tom Corner 2010-09-10 7:10 ` Clemens Ladisch 0 siblings, 1 reply; 11+ messages in thread From: Tom Corner @ 2010-09-10 6:55 UTC (permalink / raw) To: alsa-devel I've been going around and around on this. The surround sound 5.1 is playing fine except channel 0 (front-left) is playing on the woofer. I have a Terratec Aureon fun - CMI8738-MC6. I can redirect the output on 0 to right-front successfully using .asoundrc and "ttable.0.1 1". I have gotten desperate and have tested this card in Windows and was able to get it working right there. I have been using the file www_lynnemusic_com_surround_test.wma through mplayer and speaker-test to to test the setup. I am using pulseaudio, but I reconfigured my system without pulseaudio and get the same result. Any help would be much appreciated. Tom Corner ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: cmipci surround sound front-left plays on lfe 2010-09-10 6:55 cmipci surround sound front-left plays on lfe Tom Corner @ 2010-09-10 7:10 ` Clemens Ladisch [not found] ` <4C89DCD5.6040806@gmail.com> 0 siblings, 1 reply; 11+ messages in thread From: Clemens Ladisch @ 2010-09-10 7:10 UTC (permalink / raw) To: Tom Corner; +Cc: alsa-devel Tom Corner wrote: > The surround sound 5.1 is playing fine except channel 0 (front-left) > is playing on the woofer. And the software's front left channel is also playing on the front left speaker? And the subwoofer channel isn't playing on any speaker? > I can redirect the output on 0 to right-front successfully using > .asoundrc and "ttable.0.1 1". I do not understand how this is related to your problem. Regards, Clemens ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <4C89DCD5.6040806@gmail.com>]
* Re: cmipci surround sound front-left plays on lfe [not found] ` <4C89DCD5.6040806@gmail.com> @ 2010-09-10 7:33 ` Clemens Ladisch 2010-09-15 14:42 ` cmipci CMI8738-MC6 - left channel no sound Thomas Corner 0 siblings, 1 reply; 11+ messages in thread From: Clemens Ladisch @ 2010-09-10 7:33 UTC (permalink / raw) To: Tom Corner; +Cc: alsa-devel Tom Corner wrote: > On 09/10/10 09:10, Clemens Ladisch wrote: >> Tom Corner wrote: >>> The surround sound 5.1 is playing fine except channel 0 (front-left) >>> is playing on the woofer. >> >> And the software's front left channel is also playing on the front left >> speaker? And the subwoofer channel isn't playing on any speaker? > > No the subwoofer is playing correctly. The front-left is playing *only* > on the subwoofer. There is no sound at all coming out of the front-left > speaker. In other words, what happens is this? speaker output ---------------------- front L silence front R front R center center bass mix of front L + bass surround L surround L surround R surround R What happens when you run speaker-test with 4 and 2 channels? Regards, Clemens ^ permalink raw reply [flat|nested] 11+ messages in thread
* cmipci CMI8738-MC6 - left channel no sound 2010-09-10 7:33 ` Clemens Ladisch @ 2010-09-15 14:42 ` Thomas Corner 2010-09-15 15:02 ` Colin Guthrie 2010-09-16 11:51 ` Clemens Ladisch 0 siblings, 2 replies; 11+ messages in thread From: Thomas Corner @ 2010-09-15 14:42 UTC (permalink / raw) To: alsa-devel; +Cc: pulseaudio-discuss I've been going around and around on this. The surround sound 5.1 is playing fine except channel 0 (front-left) is playing on the woofer. The card is a Terratec Aureon fun - CMI8738-MC6. I have gotten desperate and have tested this card in Windows and was able to get it working right there. I have been using speaker-test to to test the setup. I am using pulseaudio. This is the summary of my results with speaker-test: speaker-test -c 6 -D surround51 -t wav speaker output ---------------------- front L silence front R front R center center bass mix of front L + bass surround L surround L surround R surround R speaker-test -c 4 -D surround40 -t wav ---------------------------------------------------- front L silence front R front R center silence bass mix of front L + bass rear L rear L rear R rear R speaker-test -c 4 -t wav speaker-test -c 6 -t wav speaker -test -c 2 -t wav --------------------------------- front L silence front R front R center silence bass mix of front L + bass rear L silence rear R silence I have removed pulseaudio again (recompiled all software with optional pulseaudio support without pulseaudio support) I should be outputting directly to alsa and the driver now. Under pulseaudio speaker-test gives error messages when surround40 and surround51 is specified. Thanks Tom ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: cmipci CMI8738-MC6 - left channel no sound 2010-09-15 14:42 ` cmipci CMI8738-MC6 - left channel no sound Thomas Corner @ 2010-09-15 15:02 ` Colin Guthrie 2010-09-16 9:54 ` Tom Corner 2010-09-16 11:51 ` Clemens Ladisch 1 sibling, 1 reply; 11+ messages in thread From: Colin Guthrie @ 2010-09-15 15:02 UTC (permalink / raw) To: alsa-devel; +Cc: pulseaudio-discuss 'Twas brillig, and Thomas Corner at 15/09/10 15:42 did gyre and gimble: > I've been going around and around on this. The surround sound 5.1 is > playing fine except channel 0 (front-left) is playing on the woofer. The > card is a Terratec Aureon fun - CMI8738-MC6. I have > gotten desperate and have tested this card in Windows and was able to > get it working right there. I have been using speaker-test to > to test the setup. I am using pulseaudio. > > This is the summary of my results with speaker-test: > > speaker-test -c 6 -D surround51 -t wav > speaker output > ---------------------- > front L silence > front R front R > center center > bass mix of front L + bass > surround L surround L > surround R surround R Smells like something is messed up with the alsa driver. Someone in alsa-devel can probably help you best here. Could be a strange mixer setting but I doubt it. > I have removed pulseaudio again (recompiled all software with optional > pulseaudio support without pulseaudio support) I should be outputting > directly to alsa and the driver now. That is massive overkill. I'd just stick with your distro's packages rather than recompiling everything and disabling PA support. The speaker test using the names surround* etc. do not use pulseaudio anyway. > Under pulseaudio speaker-test gives error messages when surround40 and > surround51 is specified. This will only be true if pulseaudio daemon is running and has the device open. Much easier to just run speaker-test as: pasuspender -- speaker-test -D surround51 ... than recompiling everything :) But ultimately it seems to be an alsa problem. All the best Col -- Colin Guthrie gmane(at)colin.guthr.ie http://colin.guthr.ie/ Day Job: Tribalogic Limited [http://www.tribalogic.net/] Open Source: Mandriva Linux Contributor [http://www.mandriva.com/] PulseAudio Hacker [http://www.pulseaudio.org/] Trac Hacker [http://trac.edgewall.org/] ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: cmipci CMI8738-MC6 - left channel no sound 2010-09-15 15:02 ` Colin Guthrie @ 2010-09-16 9:54 ` Tom Corner 0 siblings, 0 replies; 11+ messages in thread From: Tom Corner @ 2010-09-16 9:54 UTC (permalink / raw) To: Colin Guthrie; +Cc: alsa-devel I am using kernel 2.6.35 with a gentoo distribution. Is it possible that this bug has been fixed since kernel 2.6.35? Is it possible to try the latest drivers? Thanks Tom On 09/15/10 17:02, Colin Guthrie wrote: > 'Twas brillig, and Thomas Corner at 15/09/10 15:42 did gyre and gimble: >> I've been going around and around on this. The surround sound 5.1 is >> playing fine except channel 0 (front-left) is playing on the woofer. The >> card is a Terratec Aureon fun - CMI8738-MC6. I have >> gotten desperate and have tested this card in Windows and was able to >> get it working right there. I have been using speaker-test to >> to test the setup. I am using pulseaudio. >> >> This is the summary of my results with speaker-test: >> >> speaker-test -c 6 -D surround51 -t wav >> speaker output >> ---------------------- >> front L silence >> front R front R >> center center >> bass mix of front L + bass >> surround L surround L >> surround R surround R > Smells like something is messed up with the alsa driver. Someone in > alsa-devel can probably help you best here. Could be a strange mixer > setting but I doubt it. > > >> I have removed pulseaudio again (recompiled all software with optional >> pulseaudio support without pulseaudio support) I should be outputting >> directly to alsa and the driver now. > That is massive overkill. I'd just stick with your distro's packages > rather than recompiling everything and disabling PA support. > > The speaker test using the names surround* etc. do not use pulseaudio > anyway. > >> Under pulseaudio speaker-test gives error messages when surround40 and >> surround51 is specified. > This will only be true if pulseaudio daemon is running and has the > device open. Much easier to just run speaker-test as: > > pasuspender -- speaker-test -D surround51 ... > > than recompiling everything :) > > But ultimately it seems to be an alsa problem. > > All the best > > Col > > > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: cmipci CMI8738-MC6 - left channel no sound 2010-09-15 14:42 ` cmipci CMI8738-MC6 - left channel no sound Thomas Corner 2010-09-15 15:02 ` Colin Guthrie @ 2010-09-16 11:51 ` Clemens Ladisch [not found] ` <4C920A43.50308@gmail.com> 1 sibling, 1 reply; 11+ messages in thread From: Clemens Ladisch @ 2010-09-16 11:51 UTC (permalink / raw) To: Thomas Corner; +Cc: pulseaudio-discuss, alsa-devel Thomas Corner wrote: > The surround sound 5.1 is playing fine except channel 0 (front-left) > is playing on the woofer. Please show the output of "amixer". Regards, Clemens ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <4C920A43.50308@gmail.com>]
[parent not found: <4C920AE1.2050105@ladisch.de>]
[parent not found: <4C922859.1040709@gmail.com>]
* Re: cmipci CMI8738-MC6 - left channel no sound [not found] ` <4C922859.1040709@gmail.com> @ 2010-09-17 7:02 ` Clemens Ladisch 2010-09-17 19:43 ` Tom Corner 2010-09-17 20:13 ` Tom Corner 0 siblings, 2 replies; 11+ messages in thread From: Clemens Ladisch @ 2010-09-17 7:02 UTC (permalink / raw) To: Tom Corner; +Cc: alsa-devel Tom Corner wrote: > Simple mixer control 'Line-In Mode',0 > Items: 'Line-In' 'Rear Output' 'Bass Output' > Item0: 'Line-In' OK. > Simple mixer control 'Mic-In Mode',0 > Items: 'Mic-In' 'Center/LFE Output' > Item0: 'Center/LFE Output' This should be Min-In (I guess your card doesn't have shared mic-in jack). > Simple mixer control 'Phone',0 > Mono: Playback 7 [100%] [on] I'd guess you don't need this. > Simple mixer control 'Four Channel Mode',0 > Mono: Playback [off] This might have some effect, but I don't know which setting should be the correct one. Regards, Clemens ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: cmipci CMI8738-MC6 - left channel no sound 2010-09-17 7:02 ` Clemens Ladisch @ 2010-09-17 19:43 ` Tom Corner 2010-09-17 20:13 ` Tom Corner 1 sibling, 0 replies; 11+ messages in thread From: Tom Corner @ 2010-09-17 19:43 UTC (permalink / raw) To: Clemens Ladisch; +Cc: alsa-devel I tried changing these settings, but the Left Speaker is still dead. The card has 5 analog jacks: 1. Mic 2. Line-In 3. Line Out 1 (Front) / Headphone Out 4. Line Out 2 (Rear) 5. Line Out 3 (Center/Sub) Plus a Digital-In and a Digital-out. I have my speakers connected to 3, 4 and 5. I will retest the card in windows although it worked last time, but it is a while since I have heard sound from the left speaker. Regards, Tom On 09/17/10 09:02, Clemens Ladisch wrote: > Tom Corner wrote: >> Simple mixer control 'Line-In Mode',0 >> Items: 'Line-In' 'Rear Output' 'Bass Output' >> Item0: 'Line-In' > OK. > >> Simple mixer control 'Mic-In Mode',0 >> Items: 'Mic-In' 'Center/LFE Output' >> Item0: 'Center/LFE Output' > This should be Min-In (I guess your card doesn't have shared mic-in > jack). > >> Simple mixer control 'Phone',0 >> Mono: Playback 7 [100%] [on] > I'd guess you don't need this. > >> Simple mixer control 'Four Channel Mode',0 >> Mono: Playback [off] > This might have some effect, but I don't know which setting should be > the correct one. > > > Regards, > Clemens ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: cmipci CMI8738-MC6 - left channel no sound 2010-09-17 7:02 ` Clemens Ladisch 2010-09-17 19:43 ` Tom Corner @ 2010-09-17 20:13 ` Tom Corner 1 sibling, 0 replies; 11+ messages in thread From: Tom Corner @ 2010-09-17 20:13 UTC (permalink / raw) To: Clemens Ladisch; +Cc: alsa-devel I am very embarassed. I retried it in Windows and now the left front sound is clearlly coming out the center speaker and the left speaker is dead there too. A hardware problem! The left-front speaker sits on the table right next to where the cats lie. The cats have chewed up the cable - it was pretty flimsy to begin with. I am sorry to have bothered you, but I am very grateful for your help. I don't think I would have solved it so soon without your help. Thank you very much, Tom Corner ^ permalink raw reply [flat|nested] 11+ messages in thread
* cmipci surround sound front-left plays on lfe @ 2010-09-09 8:10 Tom Corner 0 siblings, 0 replies; 11+ messages in thread From: Tom Corner @ 2010-09-09 8:10 UTC (permalink / raw) To: alsa-devel I've been going around and around on this. The surround sound 5.1 is playing fine except channel 0 (front-left) is playing on the woofer. I have a Terratec Aureon fun - CMI8738-MC6. I can redirect the output on 0 to right-front successfully using .asoundrc and "ttable.0.1 1". I have gotten desperate and have tested this card in Windows and was able to get it working right there. I have been using the file www_lynnemusic_com_surround_test.wma through mplayer and speaker-test to to test the setup. I am using pulseaudio, but I reconfigured my system without pulseaudio and get the same result. Any help would be much appreciated. Tom Corner ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2010-09-17 20:13 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2010-09-10 6:55 cmipci surround sound front-left plays on lfe Tom Corner 2010-09-10 7:10 ` Clemens Ladisch [not found] ` <4C89DCD5.6040806@gmail.com> 2010-09-10 7:33 ` Clemens Ladisch 2010-09-15 14:42 ` cmipci CMI8738-MC6 - left channel no sound Thomas Corner 2010-09-15 15:02 ` Colin Guthrie 2010-09-16 9:54 ` Tom Corner 2010-09-16 11:51 ` Clemens Ladisch [not found] ` <4C920A43.50308@gmail.com> [not found] ` <4C920AE1.2050105@ladisch.de> [not found] ` <4C922859.1040709@gmail.com> 2010-09-17 7:02 ` Clemens Ladisch 2010-09-17 19:43 ` Tom Corner 2010-09-17 20:13 ` Tom Corner -- strict thread matches above, loose matches on Subject: below -- 2010-09-09 8:10 cmipci surround sound front-left plays on lfe Tom Corner
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.