Re: [PATCHv6 00/16] boot order specification

[Anthony Liguori <aliguori@linux.vnet.ibm.com>]

On 11/23/2010 09:31 AM, Gleb Natapov wrote:
> Anthony, Blue
>
> No comments on this patch series for almost a week. Can it be applied?
>    

Does that mean everyone's happy or have folks not gotten around to 
review it?

IOW, last call if you have objections :-)

Regards,

Anthony Liguori

> On Wed, Nov 17, 2010 at 06:43:47PM +0200, Gleb Natapov wrote:
>    
>> I am using open firmware naming scheme to specify device path names.
>> In this version: added SCSI bus support. Pass boot order list as file
>> to firmware.
>>
>> Names look like this on pci machine:
>> /pci@i0cf8/ide@1,1/drive@1/disk@0
>> /pci@i0cf8/isa@1/fdc@03f1/floppy@1
>> /pci@i0cf8/isa@1/fdc@03f1/floppy@0
>> /pci@i0cf8/ide@1,1/drive@1/disk@1
>> /pci@i0cf8/ide@1,1/drive@0/disk@0
>> /pci@i0cf8/scsi@3/disk@0,0
>> /pci@i0cf8/ethernet@4/ethernet-phy@0
>> /pci@i0cf8/ethernet@5/ethernet-phy@0
>> /pci@i0cf8/ide@1,1/drive@0/disk@1
>> /pci@i0cf8/isa@1/ide@01e8/drive@0/disk@0
>> /pci@i0cf8/usb@1,2/network@0/ethernet@0
>> /pci@i0cf8/usb@1,2/hub@1/network@0/ethernet@0
>> /rom@genroms/linuxboot.bin
>>
>> and on isa machine:
>> /isa/ide@0170/drive@0/disk@0
>> /isa/fdc@03f1/floppy@1
>> /isa/fdc@03f1/floppy@0
>> /isa/ide@0170/drive@0/disk@1
>>
>> Instead of using get_dev_path() callback I introduces another one
>> get_fw_dev_path. Unfortunately the way get_dev_path() callback is used
>> in migration code makes it hard to reuse it for other purposes. First
>> of all it is not called recursively so caller expects it to provide
>> unique name by itself. Device path though is inherently recursive. Each
>> individual element may not be unique, but the whole path will be. On
>> the other hand to call get_dev_path() recursively in migration code we
>> should implement it for all possible buses first. Other problem is
>> compatibility. If we change get_dev_path() output format now we will not
>> be able to migrate from old qemu to new one without some additional
>> compatibility layer.
>>
>> Gleb Natapov (16):
>>    Introduce fw_name field to DeviceInfo structure.
>>    Introduce new BusInfo callback get_fw_dev_path.
>>    Keep track of ISA ports ISA device is using in qdev.
>>    Add get_fw_dev_path callback to ISA bus in qdev.
>>    Store IDE bus id in IDEBus structure for easy access.
>>    Add get_fw_dev_path callback to IDE bus.
>>    Add get_dev_path callback for system bus.
>>    Add get_fw_dev_path callback for pci bus.
>>    Record which USBDevice USBPort belongs too.
>>    Add get_dev_path callback for usb bus.
>>    Add get_dev_path callback to scsi bus.
>>    Add bootindex parameter to net/block/fd device
>>    Change fw_cfg_add_file() to get full file path as a parameter.
>>    Add bootindex for option roms.
>>    Add notifier that will be called when machine is fully created.
>>    Pass boot device list to firmware.
>>
>>   block_int.h       |    4 +-
>>   hw/cs4231a.c      |    1 +
>>   hw/e1000.c        |    4 ++
>>   hw/eepro100.c     |    3 +
>>   hw/fdc.c          |   12 ++++++
>>   hw/fw_cfg.c       |   30 ++++++++------
>>   hw/fw_cfg.h       |    4 +-
>>   hw/gus.c          |    4 ++
>>   hw/ide/cmd646.c   |    4 +-
>>   hw/ide/internal.h |    3 +-
>>   hw/ide/isa.c      |    5 ++-
>>   hw/ide/piix.c     |    4 +-
>>   hw/ide/qdev.c     |   22 ++++++++++-
>>   hw/ide/via.c      |    4 +-
>>   hw/isa-bus.c      |   42 +++++++++++++++++++
>>   hw/isa.h          |    4 ++
>>   hw/lance.c        |    1 +
>>   hw/loader.c       |   32 ++++++++++++---
>>   hw/loader.h       |    8 ++--
>>   hw/m48t59.c       |    1 +
>>   hw/mc146818rtc.c  |    1 +
>>   hw/multiboot.c    |    3 +-
>>   hw/ne2000-isa.c   |    3 +
>>   hw/ne2000.c       |    5 ++-
>>   hw/nseries.c      |    4 +-
>>   hw/palm.c         |    6 +-
>>   hw/parallel.c     |    5 ++
>>   hw/pc.c           |    7 ++-
>>   hw/pci.c          |  110 ++++++++++++++++++++++++++++++++++++++++-----------
>>   hw/pci_host.c     |    2 +
>>   hw/pckbd.c        |    3 +
>>   hw/pcnet.c        |    6 ++-
>>   hw/piix_pci.c     |    1 +
>>   hw/qdev.c         |   32 +++++++++++++++
>>   hw/qdev.h         |    9 ++++
>>   hw/rtl8139.c      |    4 ++
>>   hw/sb16.c         |    4 ++
>>   hw/scsi-bus.c     |   23 +++++++++++
>>   hw/scsi-disk.c    |    2 +
>>   hw/serial.c       |    1 +
>>   hw/sysbus.c       |   30 ++++++++++++++
>>   hw/sysbus.h       |    4 ++
>>   hw/usb-bus.c      |   45 ++++++++++++++++++++-
>>   hw/usb-hub.c      |    3 +-
>>   hw/usb-musb.c     |    2 +-
>>   hw/usb-net.c      |    3 +
>>   hw/usb-ohci.c     |    2 +-
>>   hw/usb-uhci.c     |    2 +-
>>   hw/usb.h          |    3 +-
>>   hw/virtio-blk.c   |    2 +
>>   hw/virtio-net.c   |    2 +
>>   hw/virtio-pci.c   |    1 +
>>   net.h             |    4 +-
>>   qemu-config.c     |   17 ++++++++
>>   sysemu.h          |   11 +++++-
>>   vl.c              |  114 ++++++++++++++++++++++++++++++++++++++++++++++++++++-
>>   56 files changed, 588 insertions(+), 80 deletions(-)
>>
>> -- 
>> 1.7.2.3
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe kvm" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>      
> --
> 			Gleb.
>