* [U-Boot] [PATCH v2 01/16] ARM: remove broken "armadillo" board
2011-08-26 12:25 ` [U-Boot] [PATCH v2 00/16] " Wolfgang Denk
@ 2011-08-26 12:25 ` Wolfgang Denk
2011-08-26 15:41 ` Marek Vasut
2011-08-26 12:25 ` [U-Boot] [PATCH v2 02/16] ARM: remove broken "B2" board Wolfgang Denk
` (14 subsequent siblings)
15 siblings, 1 reply; 35+ messages in thread
From: Wolfgang Denk @ 2011-08-26 12:25 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Rowel Atienza <rowel@diwalabs.com>
---
MAINTAINERS | 4 -
MAKEALL | 1 -
board/armadillo/Makefile | 55 -------
board/armadillo/armadillo.c | 72 --------
board/armadillo/config.mk | 29 ----
board/armadillo/flash.c | 340 ---------------------------------------
board/armadillo/lowlevel_init.S | 66 --------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/armadillo.h | 157 ------------------
10 files changed, 1 insertions(+), 725 deletions(-)
delete mode 100644 board/armadillo/Makefile
delete mode 100644 board/armadillo/armadillo.c
delete mode 100644 board/armadillo/config.mk
delete mode 100644 board/armadillo/flash.c
delete mode 100644 board/armadillo/lowlevel_init.S
delete mode 100644 include/configs/armadillo.h
diff --git a/MAINTAINERS b/MAINTAINERS
index f895e9a..adf8bf2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -560,10 +560,6 @@ Albert ARIBAUD <albert.u.boot@aribaud.net>
edminiv2 ARM926EJS (Orion5x SoC)
-Rowel Atienza <rowel@diwalabs.com>
-
- armadillo ARM720T
-
Stefano Babic <sbabic@denx.de>
ea20 davinci
diff --git a/MAKEALL b/MAKEALL
index 26685fb..63be391 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -301,7 +301,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
#########################################################################
LIST_ARM7=" \
- armadillo \
B2 \
ep7312 \
evb4510 \
diff --git a/board/armadillo/Makefile b/board/armadillo/Makefile
deleted file mode 100644
index 3b52452..0000000
--- a/board/armadillo/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# (C) Copyright 2002
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := armadillo.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/armadillo/armadillo.c b/board/armadillo/armadillo.c
deleted file mode 100644
index a825144..0000000
--- a/board/armadillo/armadillo.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
- * Armadillo board HT1070
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <clps7111.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* Activate LED flasher */
- IO_LEDFLSH = 0x40;
-
- /* arch number MACH_TYPE_ARMADILLO - not official*/
- gd->bd->bi_arch_number = 83;
-
- /* location of boot parameters */
- gd->bd->bi_boot_params = 0xc0000100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_CS8900
- rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/armadillo/config.mk b/board/armadillo/config.mk
deleted file mode 100644
index ecb8b74..0000000
--- a/board/armadillo/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2000
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#address where u-boot will be relocated
-CONFIG_SYS_TEXT_BASE = 0xc0f80000
diff --git a/board/armadillo/flash.c b/board/armadillo/flash.c
deleted file mode 100644
index cf7d7f6..0000000
--- a/board/armadillo/flash.c
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
- * Flash driver for armadillo board HT1070
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#define FLASH_BANK_SIZE 0x400000
-
-/*value used by hermit is 0x200*/
-/*document says sector size is either 64k in low mem reg and 8k in high mem reg*/
-#define MAIN_SECT_SIZE 0x10000
-
-#define UNALIGNED_MASK (3)
-#define FL_WORD(addr) (*(volatile unsigned short*)(addr))
-#define FLASH_TIMEOUT 20000000
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init (void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
-
- flash_info[i].flash_id = (FUJ_MANUFACT & FLASH_VENDMASK);
- /*(INTEL_ID_28F128J3 & FLASH_TYPEMASK); */
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- if (i == 0)
- flashbase = PHYS_FLASH_1;
- else
- panic ("configured too many flash banks!\n");
- for (j = 0; j < flash_info[i].sector_count; j++) {
- flash_info[i].start[j] =
- flashbase + j * MAIN_SECT_SIZE;
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors
- */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (FUJ_MANUFACT & FLASH_VENDMASK):
- printf ("Fujitsu: ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-/*
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
- printf ("28F128J3 (128Mbit)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- goto Done;
- break;
- }
-*/
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-
-/*
-Done: ;
-*/
-}
-
-/*
- * * Loop until both write state machines complete.
- * */
-static unsigned short flash_status_wait (unsigned long addr,
- unsigned short value)
-{
- unsigned short status;
- long timeout = FLASH_TIMEOUT;
-
- while (((status = (FL_WORD (addr))) != value) && timeout > 0) {
- timeout--;
- }
- return status;
-}
-
-/*
- * Loop until the Write State machine is ready, then do a full error
- * check. Clear status and leave the flash in Read Array mode; return
- * 0 for no error, -1 for error.
- */
-static int flash_status_full_check (unsigned long addr, unsigned short value1,
- unsigned short value2)
-{
- unsigned short status1, status2;
-
- status1 = flash_status_wait (addr, value1);
- status2 = flash_status_wait (addr + 2, value2);
- return (status1 != value1 || status2 != value2) ? -1 : 0;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int flag, prot, sect;
- int rc = ERR_OK;
- unsigned long base;
- unsigned long addr;
- ulong start;
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (FUJ_MANUFACT & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
- if (prot)
- return ERR_PROTECTED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- flag = disable_interrupts ();
-
- printf ("Erasing %d sectors starting at sector %2d.\n"
- "This make take some time ... ",
- s_last - s_first, sect);
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
- /* ARM simple, non interrupt dependent timer */
- start = get_timer(0);
-
- if (info->protect[sect] == 0) { /* not protected */
-
- addr = sect * MAIN_SECT_SIZE;
- addr &= ~(unsigned long) UNALIGNED_MASK; /* word align */
- base = addr & 0xF0000000;
-
- FL_WORD (base + (0x555 << 1)) = 0xAA;
- FL_WORD (base + (0x2AA << 1)) = 0x55;
- FL_WORD (base + (0x555 << 1)) = 0x80;
- FL_WORD (base + (0x555 << 1)) = 0xAA;
- FL_WORD (base + (0x2AA << 1)) = 0x55;
- FL_WORD (addr) = 0x30;
- if (flash_status_full_check (addr, 0xFFFF, 0xFFFF))
- return ERR_PROTECTED;
- }
- }
- printf ("\nDone.\n");
- if (ctrlc ())
- printf ("User Interrupt!\n");
-
- /* allow flash to settle - wait 10 ms */
- udelay_masked (10000);
-
- if (flag)
- enable_interrupts ();
-
- return rc;
-}
-
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t * info, ulong dest, ushort data)
-{
- int flag;
- unsigned long base;
- ulong start;
-
- /* Check if Flash is (sufficiently) erased
- */
- if ((FL_WORD (dest) & data) != data)
- return ERR_NOT_ERASED;
-
- /*if(dest & UNALIGNED_MASK) return ERR_ALIGN; */
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- *@address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- flag = disable_interrupts ();
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- base = dest & 0xF0000000;
- FL_WORD (base + (0x555 << 1)) = 0xAA;
- FL_WORD (base + (0x2AA << 1)) = 0x55;
- FL_WORD (base + (0x555 << 1)) = 0xA0;
- FL_WORD (dest) = data;
- /*printf("writing 0x%p = 0x%x\n",dest,data); */
- if (flash_status_wait (dest, data) != data)
- return ERR_PROG_ERROR;
-
- if (flag)
- enable_interrupts ();
-
- return ERR_OK;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- ushort data;
- int l;
- int i, rc;
-
- wp = (addr & ~1); /* get lower word aligned address */
- printf ("Writing %lu short data to 0x%lx from 0x%p.\n ", cnt, wp, src);
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
- for (; i < 2 && cnt > 0; ++i) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 2;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 2) {
- data = *((vu_short *) src);
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- src += 2;
- wp += 2;
- cnt -= 2;
- }
-
- if (cnt == 0) {
- printf ("\nDone.\n");
- return ERR_OK;
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- }
- for (; i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- return write_word (info, wp, data);
-}
diff --git a/board/armadillo/lowlevel_init.S b/board/armadillo/lowlevel_init.S
deleted file mode 100644
index e7d373d..0000000
--- a/board/armadillo/lowlevel_init.S
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Initialization stuff - taken from hermit
- * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
- * Armadillo board HT1070
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-
-
-/* some parameters for the board */
-/* setting up the memory */
-#define SRAM_START 0x60000000
-#define SRAM_SIZE 0x0000c000
-
-.globl lowlevel_init
-lowlevel_init:
- mov r0, #0x70 /* 32-bit code + data, MMU mandatory */
- mcr p15, 0, r0, c1, c0, 0 /* MMU init */
-
- mov r0, #0
- mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
- mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
-
- mov r0, #0x80000000 /* I/O base */
-
- mov r1, #0x6 /* CLKCTL_73 in SYSCON3 */
- add r2, r0, #0x2200 /* address of SYSCON3 in r2 */
- str r1, [r2] /* set clock speed to 73.728 MHz */
-
- mov r1, #0x81 /* 64KHz DRAM refresh period */
- str r1, [r0, #0x200] /* set DRFPR */
-
- mov r1, #0x500 /* permanent enable, 16bits wide */
- add r1, r1, #0x42 /* 128Mbit, CAS lat = 2 SDRAM */
- add r2, r0, #0x2300 /* load address in r2 */
- str r1, [r2]
-
- mov r1, #0x100 /* SDRAM refresh rate */
- add r2, r0, #0x2340 /* load address in r2 */
- str r1, [r2]
-
- mov sp, #SRAM_START /* init stack pointer */
- add sp, sp, #SRAM_SIZE
-
- /* everything is fine now */
- mov pc, lr
diff --git a/boards.cfg b/boards.cfg
index c31114d..1ad3624 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -42,7 +42,6 @@ imx31_litekit arm arm1136 - logicpd
mx35pdk arm arm1136 - freescale mx35
omap2420h4 arm arm1136 - ti omap24xx
tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x
-armadillo arm arm720t
ep7312 arm arm720t
impa7 arm arm720t
modnet50 arm arm720t
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 4cb727f..ad331f1 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+armadillo arm arm720t - 2011-07-16 Rowel Atienza <rowel@diwalabs.com>
trab arm S3C2400 - 2011-05-01 Gary Jennejohn <garyj@denx.de>
xsengine ARM PXA2xx 4262a7c 2010-10-20
wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh@etc.sk>
diff --git a/include/configs/armadillo.h b/include/configs/armadillo.h
deleted file mode 100644
index d0d0998..0000000
--- a/include/configs/armadillo.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * (C) Copyright 2000
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * Configuation settings for the EP7312 board.
- *
- * Modified to work on Armadillo HT1070 ARM720T board
- * (C) Copyright 2005 Rowel Atienza rowel at diwalabs.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * If we are developing, we might want to start armboot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- */
-#undef CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
-#define CONFIG_ARMADILLO 1 /* on an Armadillo Board */
-#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */
-#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
-
-#undef CONFIG_USE_IRQ /* don't need them anymore */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_CS8900 /* we have a CS8900 on-board */
-#define CONFIG_CS8900_BASE 0x20000300 /* armadillo board */
-#define CONFIG_CS8900_BUS16
-#undef CONFIG_CS8900_BUS32
-
-/*
- * select serial console configuration
- */
-#define CONFIG_CLPS7111_SERIAL
-#define CONFIG_SERIAL1 1 /* we use Serial line 1 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "root=/dev/ram0 rootfstype=ext2 console=ttyAM0,115200"
-
-#define CONFIG_BOOTCOMMAND "bootm 40000 180000"
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "ARMADILLO # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00040000 /* default load address for armadillo: kernel img is here*/
-
-#define CONFIG_SYS_HZ 2000 /* decrementer freq: 2 kHz */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB armadillo SDRAM */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x00400000 /* 4 MB */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) /* Addr of Environment Sector */
-#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 35+ messages in thread* [U-Boot] [PATCH v2 01/16] ARM: remove broken "armadillo" board
2011-08-26 12:25 ` [U-Boot] [PATCH v2 01/16] ARM: remove broken "armadillo" board Wolfgang Denk
@ 2011-08-26 15:41 ` Marek Vasut
2011-08-26 19:57 ` Wolfgang Denk
2011-08-30 6:06 ` Albert ARIBAUD
0 siblings, 2 replies; 35+ messages in thread
From: Marek Vasut @ 2011-08-26 15:41 UTC (permalink / raw)
To: u-boot
On Friday, August 26, 2011 02:25:33 PM Wolfgang Denk wrote:
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Rowel Atienza <rowel@diwalabs.com>
> ---
> MAINTAINERS | 4 -
> MAKEALL | 1 -
> board/armadillo/Makefile | 55 -------
> board/armadillo/armadillo.c | 72 --------
> board/armadillo/config.mk | 29 ----
> board/armadillo/flash.c | 340
> --------------------------------------- board/armadillo/lowlevel_init.S |
> 66 --------
> boards.cfg | 1 -
> doc/README.scrapyard | 1 +
> include/configs/armadillo.h | 157 ------------------
> 10 files changed, 1 insertions(+), 725 deletions(-)
> delete mode 100644 board/armadillo/Makefile
> delete mode 100644 board/armadillo/armadillo.c
> delete mode 100644 board/armadillo/config.mk
> delete mode 100644 board/armadillo/flash.c
> delete mode 100644 board/armadillo/lowlevel_init.S
> delete mode 100644 include/configs/armadillo.h
>
This one can be fixed with such a patch, though I dunno if it's worth it.
diff --git a/include/configs/armadillo.h b/include/configs/armadillo.h
index d0d0998..8a2d2b7 100644
--- a/include/configs/armadillo.h
+++ b/include/configs/armadillo.h
@@ -135,6 +135,8 @@
#define PHYS_FLASH_SIZE 0x00400000 /* 4 MB */
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR (PHYS_SDRAM_1 + CONFIG_STACKSIZE)
/*-----------------------------------------------------------------------
* FLASH and environment organization
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [U-Boot] [PATCH v2 01/16] ARM: remove broken "armadillo" board
2011-08-26 15:41 ` Marek Vasut
@ 2011-08-26 19:57 ` Wolfgang Denk
2011-08-26 20:49 ` Marek Vasut
2011-08-30 6:06 ` Albert ARIBAUD
1 sibling, 1 reply; 35+ messages in thread
From: Wolfgang Denk @ 2011-08-26 19:57 UTC (permalink / raw)
To: u-boot
Dear Marek Vasut,
In message <201108261741.38560.marek.vasut@gmail.com> you wrote:
>
> This one can be fixed with such a patch, though I dunno if it's worth it.
If you are sure that this is sufficient, then could you please submit
a proper patch with Subject, SoB-Line, etc.?
Rowel, can you please confirm that this patch works for you, too?
Thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
What the gods would destroy they first submit to an IEEE standards
committee.
^ permalink raw reply [flat|nested] 35+ messages in thread
* [U-Boot] [PATCH v2 01/16] ARM: remove broken "armadillo" board
2011-08-26 19:57 ` Wolfgang Denk
@ 2011-08-26 20:49 ` Marek Vasut
2011-08-26 22:29 ` Wolfgang Denk
0 siblings, 1 reply; 35+ messages in thread
From: Marek Vasut @ 2011-08-26 20:49 UTC (permalink / raw)
To: u-boot
On Friday, August 26, 2011 09:57:15 PM Wolfgang Denk wrote:
> Dear Marek Vasut,
>
> In message <201108261741.38560.marek.vasut@gmail.com> you wrote:
> > This one can be fixed with such a patch, though I dunno if it's worth it.
>
> If you are sure that this is sufficient, then could you please submit
> a proper patch with Subject, SoB-Line, etc.?
>
Ok, what I meant by "dunno if it's worth it" is, whether we do or don't want to
prolong the agony of this board. Noone maintains it anymore, it's basically a
dead code. Do we want to keep it? Correct me if I'm wrong.
Cheers
>
> Rowel, can you please confirm that this patch works for you, too?
>
>
> Thanks.
>
> Best regards,
>
> Wolfgang Denk
^ permalink raw reply [flat|nested] 35+ messages in thread
* [U-Boot] [PATCH v2 01/16] ARM: remove broken "armadillo" board
2011-08-26 20:49 ` Marek Vasut
@ 2011-08-26 22:29 ` Wolfgang Denk
0 siblings, 0 replies; 35+ messages in thread
From: Wolfgang Denk @ 2011-08-26 22:29 UTC (permalink / raw)
To: u-boot
Dear Marek Vasut,
In message <201108262249.13179.marek.vasut@gmail.com> you wrote:
>
> > If you are sure that this is sufficient, then could you please submit
> > a proper patch with Subject, SoB-Line, etc.?
> >
> Ok, what I meant by "dunno if it's worth it" is, whether we do or don't want to
> prolong the agony of this board. Noone maintains it anymore, it's basically a
> dead code. Do we want to keep it? Correct me if I'm wrong.
Well, let's see if Rowel wakes up now.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"...one of the main causes of the fall of the Roman Empire was that,
lacking zero, they had no way to indicate successful termination of
their C programs." - Robert Firth
^ permalink raw reply [flat|nested] 35+ messages in thread
* [U-Boot] [PATCH v2 01/16] ARM: remove broken "armadillo" board
2011-08-26 15:41 ` Marek Vasut
2011-08-26 19:57 ` Wolfgang Denk
@ 2011-08-30 6:06 ` Albert ARIBAUD
2011-08-30 7:20 ` Marek Vasut
2011-08-30 9:32 ` Wolfgang Denk
1 sibling, 2 replies; 35+ messages in thread
From: Albert ARIBAUD @ 2011-08-30 6:06 UTC (permalink / raw)
To: u-boot
Hi Marek,
> This one can be fixed with such a patch, though I dunno if it's worth it.
>
> diff --git a/include/configs/armadillo.h b/include/configs/armadillo.h
> [...]
I have seen the rest of the discussion already, and will apply the
armadillo removal patch. I just want to make a quick note (again) to all:
Please avoid copy-pasting a patch or even part of a patch in your
replies to an official patch, because patchwork then believes you have
actually posted a new patch and created a new entry, "hijacking" the
comments for the original one.
The 'armadillo' patch shows the issue:
<http://patchwork.ozlabs.org/patch/111747/> is the actual patch which
should have had the comments, but these were 'hijacked' and stored under
<http://patchwork.ozlabs.org/patch/111800/> which is actually not a
patch but one of the replies.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 35+ messages in thread
* [U-Boot] [PATCH v2 01/16] ARM: remove broken "armadillo" board
2011-08-30 6:06 ` Albert ARIBAUD
@ 2011-08-30 7:20 ` Marek Vasut
2011-08-30 9:32 ` Wolfgang Denk
1 sibling, 0 replies; 35+ messages in thread
From: Marek Vasut @ 2011-08-30 7:20 UTC (permalink / raw)
To: u-boot
On Tuesday, August 30, 2011 08:06:43 AM Albert ARIBAUD wrote:
> Hi Marek,
>
> > This one can be fixed with such a patch, though I dunno if it's worth it.
> >
> > diff --git a/include/configs/armadillo.h b/include/configs/armadillo.h
> > [...]
>
> I have seen the rest of the discussion already, and will apply the
> armadillo removal patch. I just want to make a quick note (again) to all:
Yes, it seems the person maintaining Armadillo doesn't respond. Even worse, that
mailbox is long abandoned.
>
> Please avoid copy-pasting a patch or even part of a patch in your
> replies to an official patch, because patchwork then believes you have
> actually posted a new patch and created a new entry, "hijacking" the
> comments for the original one.
Ah damn, ok.
>
> The 'armadillo' patch shows the issue:
>
> <http://patchwork.ozlabs.org/patch/111747/> is the actual patch which
> should have had the comments, but these were 'hijacked' and stored under
> <http://patchwork.ozlabs.org/patch/111800/> which is actually not a
> patch but one of the replies.
>
> Amicalement,
Cheers
^ permalink raw reply [flat|nested] 35+ messages in thread
* [U-Boot] [PATCH v2 01/16] ARM: remove broken "armadillo" board
2011-08-30 6:06 ` Albert ARIBAUD
2011-08-30 7:20 ` Marek Vasut
@ 2011-08-30 9:32 ` Wolfgang Denk
1 sibling, 0 replies; 35+ messages in thread
From: Wolfgang Denk @ 2011-08-30 9:32 UTC (permalink / raw)
To: u-boot
Dear Albert ARIBAUD,
In message <4E5C7DF3.3090506@aribaud.net> you wrote:
> Hi Marek,
>
> > This one can be fixed with such a patch, though I dunno if it's worth it.
> >
> > diff --git a/include/configs/armadillo.h b/include/configs/armadillo.h
> > [...]
>
> I have seen the rest of the discussion already, and will apply the
> armadillo removal patch. I just want to make a quick note (again) to all:
Yes, please remove the board. All attempts to contect the currently
known maintainer address failed.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"There are three principal ways to lose money: wine, women, and en-
gineers. While the first two are more pleasant, the third is by far
the more certain." -- Baron Rothschild, ca. 1800
^ permalink raw reply [flat|nested] 35+ messages in thread
* [U-Boot] [PATCH v2 02/16] ARM: remove broken "B2" board
2011-08-26 12:25 ` [U-Boot] [PATCH v2 00/16] " Wolfgang Denk
2011-08-26 12:25 ` [U-Boot] [PATCH v2 01/16] ARM: remove broken "armadillo" board Wolfgang Denk
@ 2011-08-26 12:25 ` Wolfgang Denk
2011-08-26 12:25 ` [U-Boot] [PATCH v2 03/16] ARM: remove broken "edb93xx" boards Wolfgang Denk
` (13 subsequent siblings)
15 siblings, 0 replies; 35+ messages in thread
From: Wolfgang Denk @ 2011-08-26 12:25 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Andrea Scian <andrea.scian@dave-tech.it>
---
MAINTAINERS | 4 -
MAKEALL | 1 -
board/dave/B2/B2.c | 139 --------------------------
board/dave/B2/Makefile | 55 -----------
board/dave/B2/config.mk | 30 ------
board/dave/B2/flash.c | 76 --------------
board/dave/B2/lowlevel_init.S | 167 -------------------------------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/B2.h | 216 -----------------------------------------
10 files changed, 1 insertions(+), 689 deletions(-)
delete mode 100644 board/dave/B2/B2.c
delete mode 100644 board/dave/B2/Makefile
delete mode 100644 board/dave/B2/config.mk
delete mode 100644 board/dave/B2/flash.c
delete mode 100644 board/dave/B2/lowlevel_init.S
delete mode 100644 include/configs/B2.h
diff --git a/MAINTAINERS b/MAINTAINERS
index adf8bf2..03ba243 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -842,10 +842,6 @@ Michael Schwingen <michael@schwingen.org>
actux4 xscale/ixp
dvlhost xscale/ixp
-Andrea Scian <andrea.scian@dave-tech.it>
-
- B2 ARM7TDMI (S3C44B0X)
-
Nick Thompson <nick.thompson@gefanuc.com>
da830evm ARM926EJS (DA830/OMAP-L137)
diff --git a/MAKEALL b/MAKEALL
index 63be391..63315fb 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -301,7 +301,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
#########################################################################
LIST_ARM7=" \
- B2 \
ep7312 \
evb4510 \
impa7 \
diff --git a/board/dave/B2/B2.c b/board/dave/B2/B2.c
deleted file mode 100644
index 096ebbd..0000000
--- a/board/dave/B2/B2.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * (C) Copyright 2004
- * DAVE Srl
- * http://www.dave-tech.it
- * http://www.wawnet.biz
- * mailto:info at wawnet.biz
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/hardware.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialization
- */
-
-int board_init (void)
-{
- u32 temp;
-
- /* Configuration Port Control Register*/
- /* Port A */
- PCONA = 0x3ff;
-
- /* Port B */
- PCONB = 0xff;
- PDATB = 0xFFFF;
-
- /* Port C */
- /*
- PCONC = 0xff55ff15;
- PDATC = 0x0;
- PUPC = 0xffff;
- */
-
- /* Port D */
- /*
- PCOND = 0xaaaa;
- PUPD = 0xff;
- */
-
- /* Port E */
- PCONE = 0x0001aaa9;
- PDATE = 0x0;
- PUPE = 0xff;
-
- /* Port F */
- PCONF = 0x124955;
- PDATF = 0xff; /* B2-eth_reset tied high level */
- /*
- PUPF = 0x1e3;
- */
-
- /* Port G */
- PUPG = 0x1;
- PCONG = 0x3; /*PG0= EINT0= ETH_INT prepared for linux kernel*/
-
- INTMSK = 0x03fffeff;
- INTCON = 0x05;
-
- /*
- Configure chip ethernet interrupt as High level
- Port G EINT 0-7 EINT0 -> CHIP ETHERNET
- */
- temp = EXTINT;
- temp &= ~0x7;
- temp |= 0x1; /*LEVEL_HIGH*/
- EXTINT = temp;
-
- /*
- Reset SMSC LAN91C96 chip
- */
- temp= PCONF;
- temp |= 0x00000040;
- PCONF = temp;
-
- /* Reset high */
- temp = PDATF;
- temp |= (1 << 3);
- PDATF = temp;
-
- /* Short delay */
- for (temp=0;temp<10;temp++)
- {
- /* NOP */
- }
-
- /* Reset low */
- temp = PDATF;
- temp &= ~(1 << 3);
- PDATF = temp;
-
- /* arch number MACH_TYPE_MBA44B0 */
- gd->bd->bi_arch_number = MACH_TYPE_S3C44B0;
-
- /* location of boot parameters */
- gd->bd->bi_boot_params = 0x0c000100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_LAN91C96
- rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/dave/B2/Makefile b/board/dave/B2/Makefile
deleted file mode 100644
index b981579..0000000
--- a/board/dave/B2/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# (C) Copyright 2002
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := B2.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/dave/B2/config.mk b/board/dave/B2/config.mk
deleted file mode 100644
index f7b686a..0000000
--- a/board/dave/B2/config.mk
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2000
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0x0C100000
-
-PLATFORM_CPPFLAGS += -Uarm
diff --git a/board/dave/B2/flash.c b/board/dave/B2/flash.c
deleted file mode 100644
index bb892e6..0000000
--- a/board/dave/B2/flash.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stefan Roese, esd gmbh germany, stefan.roese at esd-electronics.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/hardware.h>
-
-/*
- * include common flash code (for esd boards)
- */
-#include "../common/flash.c"
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long * addr, flash_info_t * info);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-#ifdef __DEBUG_START_FROM_SRAM__
- return CONFIG_SYS_DUMMY_FLASH_SIZE;
-#else
- unsigned long size_b0;
- int i;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0<<20);
- }
-
- /* Setup offsets */
- flash_get_offsets (0, &flash_info[0]);
-
- /* Monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET,
- -CONFIG_SYS_MONITOR_LEN,
- 0xffffffff,
- &flash_info[0]);
-
- flash_info[0].size = size_b0;
-
- return (size_b0);
-#endif
-}
diff --git a/board/dave/B2/lowlevel_init.S b/board/dave/B2/lowlevel_init.S
deleted file mode 100644
index 2f3a364..0000000
--- a/board/dave/B2/lowlevel_init.S
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * (C) Copyright 2004
- * DAVE Srl
- *
- * http://www.dave-tech.it
- * http://www.wawnet.biz
- * mailto:info at wawnet.biz
- *
- * memsetup-sa1110.S (blob): memory setup for various SA1110 architectures
- * Modified By MATTO
- *
- * Copyright (C) 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-/*
- * Documentation:
- * Intel Corporation, "Intel StrongARM SA-1110 Microprocessor
- * Advanced Developer's manual, December 1999
- *
- * Intel has a very hard to find SDRAM configurator on their web site:
- * http://appzone.intel.com/hcd/sa1110/memory/index.asp
- *
- * NOTE: This code assumes that an SA1110 CPU *always* uses SDRAM. This
- * appears to be true, but it might be possible that somebody designs a
- * board with mixed EDODRAM/SDRAM memory (which is a bad idea). -- Erik
- *
- * 04-10-2001: SELETZ
- * - separated memory config for multiple platform support
- * - perform SA1110 Hardware Reset Procedure
- *
- */
-
-.equ B0_Tacs, 0x0 /* 0clk */
-.equ B0_Tcos, 0x0 /* 0clk */
-.equ B0_Tacc, 0x4 /* 6clk */
-.equ B0_Tcoh, 0x0 /* 0clk */
-.equ B0_Tah, 0x0 /* 0clk */
-.equ B0_Tacp, 0x0 /* 0clk */
-.equ B0_PMC, 0x0 /* normal(1data) */
-/* Bank 1 parameter */
-.equ B1_Tacs, 0x3 /* 4clk */
-.equ B1_Tcos, 0x3 /* 4clk */
-.equ B1_Tacc, 0x7 /* 14clkv */
-.equ B1_Tcoh, 0x3 /* 4clk */
-.equ B1_Tah, 0x3 /* 4clk */
-.equ B1_Tacp, 0x3 /* 6clk */
-.equ B1_PMC, 0x0 /* normal(1data) */
-
-/* Bank 2 parameter - LAN91C96 */
-.equ B2_Tacs, 0x3 /* 4clk */
-.equ B2_Tcos, 0x3 /* 4clk */
-.equ B2_Tacc, 0x7 /* 14clk */
-.equ B2_Tcoh, 0x3 /* 4clk */
-.equ B2_Tah, 0x3 /* 4clk */
-.equ B2_Tacp, 0x3 /* 6clk */
-.equ B2_PMC, 0x0 /* normal(1data) */
-
-/* Bank 3 parameter */
-.equ B3_Tacs, 0x3 /* 4clk */
-.equ B3_Tcos, 0x3 /* 4clk */
-.equ B3_Tacc, 0x7 /* 14clk */
-.equ B3_Tcoh, 0x3 /* 4clk */
-.equ B3_Tah, 0x3 /* 4clk */
-.equ B3_Tacp, 0x3 /* 6clk */
-.equ B3_PMC, 0x0 /* normal(1data) */
-
-/* Bank 4 parameter */
-.equ B4_Tacs, 0x3 /* 4clk */
-.equ B4_Tcos, 0x3 /* 4clk */
-.equ B4_Tacc, 0x7 /* 14clk */
-.equ B4_Tcoh, 0x3 /* 4clk */
-.equ B4_Tah, 0x3 /* 4clk */
-.equ B4_Tacp, 0x3 /* 6clk */
-.equ B4_PMC, 0x0 /* normal(1data) */
-
-/* Bank 5 parameter */
-.equ B5_Tacs, 0x3 /* 4clk */
-.equ B5_Tcos, 0x3 /* 4clk */
-.equ B5_Tacc, 0x7 /* 14clk */
-.equ B5_Tcoh, 0x3 /* 4clk */
-.equ B5_Tah, 0x3 /* 4clk */
-.equ B5_Tacp, 0x3 /* 6clk */
-.equ B5_PMC, 0x0 /* normal(1data) */
-
-/* Bank 6(if SROM) parameter */
-.equ B6_Tacs, 0x3 /* 4clk */
-.equ B6_Tcos, 0x3 /* 4clk */
-.equ B6_Tacc, 0x7 /* 14clk */
-.equ B6_Tcoh, 0x3 /* 4clk */
-.equ B6_Tah, 0x3 /* 4clk */
-.equ B6_Tacp, 0x3 /* 6clk */
-.equ B6_PMC, 0x0 /* normal(1data) */
-
-/* Bank 7(if SROM) parameter */
-.equ B7_Tacs, 0x3 /* 4clk */
-.equ B7_Tcos, 0x3 /* 4clk */
-.equ B7_Tacc, 0x7 /* 14clk */
-.equ B7_Tcoh, 0x3 /* 4clk */
-.equ B7_Tah, 0x3 /* 4clk */
-.equ B7_Tacp, 0x3 /* 6clk */
-.equ B7_PMC, 0x0 /* normal(1data) */
-
-/* Bank 6 parameter */
-.equ B6_MT, 0x3 /* SDRAM */
-.equ B6_Trcd, 0x0 /* 2clk */
-.equ B6_SCAN, 0x0 /* 10bit */
-
-.equ B7_MT, 0x3 /* SDRAM */
-.equ B7_Trcd, 0x0 /* 2clk */
-.equ B7_SCAN, 0x0 /* 10bit */
-
-
-/* REFRESH parameter */
-.equ REFEN, 0x1 /* Refresh enable */
-.equ TREFMD, 0x0 /* CBR(CAS before RAS)/Auto refresh */
-.equ Trp, 0x0 /* 2clk */
-.equ Trc, 0x3 /* 0x1=5clk 0x3=11clk*/
-.equ Tchr, 0x0 /* 0x2=3clk 0x0=0clks */
-.equ REFCNT, 879
-
-MEMORY_CONFIG:
- .long 0x12111900 /* Bank0 = OM[1:0] , Bank1-7 16bit, Bank2=Nowait,UB/LB*/
- .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /*GCS0*/
- .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /*GCS1*/
- .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /*GCS2*/
- .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /*GCS3*/
- .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /*GCS4*/
- .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /*GCS5*/
- .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) /*GCS6*/
- .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) /*GCS7*/
- .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) /*REFRESH RFEN=1, TREFMD=0, trp=3clk, trc=5clk, tchr=3clk,count=1019*/
- .word 0x17 /*SCLK power down mode, BANKSIZE 16M/16M*/
- .word 0x20 /*MRSR6 CL=2clk*/
- .word 0x20 /*MRSR7*/
-
-
-.globl lowlevel_init
-lowlevel_init:
-
- /*
- the next instruction fail due memory relocation...
- we'll find the right MEMORY_CONFIG address with the next 3 lines...
- */
- /*ldr r0, =MEMORY_CONFIG*/
- mov r0, pc
- ldr r1, =(0x38+4)
- sub r0, r0, r1
-
- ldmia r0, {r1-r13}
- ldr r0, =0x01c80000
- stmia r0, {r1-r13}
- mov pc, lr
diff --git a/boards.cfg b/boards.cfg
index 1ad3624..91bcee8 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -234,7 +234,6 @@ xaeniax arm pxa
xm250 arm pxa
zipitz2 arm pxa
zylonite arm pxa
-B2 arm s3c44b0 - dave
assabet arm sa1100
dnp1110 arm sa1100
gcplus arm sa1100
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index ad331f1..e12208c 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+B2 arm s3c44b0 - 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it>
armadillo arm arm720t - 2011-07-16 Rowel Atienza <rowel@diwalabs.com>
trab arm S3C2400 - 2011-05-01 Gary Jennejohn <garyj@denx.de>
xsengine ARM PXA2xx 4262a7c 2010-10-20
diff --git a/include/configs/B2.h b/include/configs/B2.h
deleted file mode 100644
index e181fa8..0000000
--- a/include/configs/B2.h
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * (C) Copyright 2004
- * DAVE Srl
- *
- * http://www.dave-tech.it
- * http://www.wawnet.biz
- * mailto:info at wawnet.biz
- *
- * Configuation settings for the B2 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
-#define CONFIG_B2 1 /* on an B2 Board */
-#define CONFIG_ARM_THUMB 1 /* this is an ARM7TDMI */
-#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
-#define CONFIG_ARCH_CPU_INIT
-
-#define CONFIG_S3C44B0_CLOCK_SPEED 75 /* we have a 75Mhz S3C44B0*/
-
-
-#undef CONFIG_USE_IRQ /* don't need them anymore */
-
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
-#define CONFIG_ENV_SIZE 1024 /* 1024 bytes may be used for env vars*/
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024 )
-
-/*
- * Hardware drivers
- */
-#define CONFIG_LAN91C96
-#define CONFIG_LAN91C96_BASE 0x04000300 /* base address */
-#define CONFIG_SMC_USE_32_BIT
-#undef CONFIG_SHOW_ACTIVITY
-#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_S3C44B0_SERIAL
-#define CONFIG_SERIAL1 1 /* we use Serial line 1 */
-
-#define CONFIG_S3C44B0_I2C
-#define CONFIG_RTC_S3C44B0
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-
-#define CONFIG_NET_MULTI
-#define CONFIG_BOOTDELAY 5
-#define CONFIG_ETHADDR 00:50:c2:1e:af:fb
-#define CONFIG_BOOTARGS "setenv bootargs root=/dev/ram ip=192.168.0.70:::::eth0:off \
- ether=25,0,0,0,eth0 ethaddr=00:50:c2:1e:af:fb"
-#define CONFIG_NETMASK 255.255.0.0
-#define CONFIG_IPADDR 192.168.0.70
-#define CONFIG_SERVERIP 192.168.0.23
-#define CONFIG_BOOTFILE "B2-rootfs/usr/B2-zImage.u-boot"
-#define CONFIG_BOOTCOMMAND "bootm 20000 f0000"
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0C400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x0c700000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000 /* 1 kHz */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */
-#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x00400000 /* 4 MB */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
-#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
-#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
-/*
- * The following defines are added for buggy IOP480 byte interface.
- * All other boards should use the standard values (CPCI405 etc.)
- */
-#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */
-#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */
-#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-
-/*-----------------------------------------------------------------------
- * Environment Variable setup
- */
-#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
-#define CONFIG_ENV_OFFSET 0x0 /* environment starts at the beginning of the EEPROM */
-
-/*-----------------------------------------------------------------------
- * I2C EEPROM (STM24C02W6) for environment
- */
-#define CONFIG_HARD_I2C /* I2c with hardware support */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0xFE
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0xA8 /* EEPROM STM24C02W6 */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
-/* mask of address bits that overflow into the "EEPROM chip address" */
-/*#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07*/
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
- /* 16 byte page write mode using*/
- /* last 4 bits of the address */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-
-/* Flash banks JFFS2 should use */
-/*
-#define CONFIG_SYS_JFFS2_FIRST_BANK 0
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR 2
-#define CONFIG_SYS_JFFS2_NUM_BANKS 1
-*/
-
-/*
- Linux TAGs (see arch/arm/lib/armlinux.c)
-*/
-#define CONFIG_CMDLINE_TAG
-#undef CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 35+ messages in thread* [U-Boot] [PATCH v2 03/16] ARM: remove broken "edb93xx" boards
2011-08-26 12:25 ` [U-Boot] [PATCH v2 00/16] " Wolfgang Denk
2011-08-26 12:25 ` [U-Boot] [PATCH v2 01/16] ARM: remove broken "armadillo" board Wolfgang Denk
2011-08-26 12:25 ` [U-Boot] [PATCH v2 02/16] ARM: remove broken "B2" board Wolfgang Denk
@ 2011-08-26 12:25 ` Wolfgang Denk
2011-08-26 12:25 ` [U-Boot] [PATCH v2 04/16] ARM: remove broken "lpd7a40x" boards Wolfgang Denk
` (12 subsequent siblings)
15 siblings, 0 replies; 35+ messages in thread
From: Wolfgang Denk @ 2011-08-26 12:25 UTC (permalink / raw)
To: u-boot
Remove edb9301, edb9302, edb9302a, edb9307, edb9307a, edb9312,
edb9315 and edb9315a boards.
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 8 --
Makefile | 10 --
board/edb93xx/Makefile | 50 --------
board/edb93xx/config.mk | 33 -----
board/edb93xx/early_udelay.h | 34 ------
board/edb93xx/edb93xx.c | 110 -----------------
board/edb93xx/flash_cfg.c | 38 ------
board/edb93xx/pll_cfg.c | 58 ---------
board/edb93xx/pll_cfg.h | 72 -----------
board/edb93xx/sdram_cfg.c | 146 -----------------------
board/edb93xx/sdram_cfg.h | 144 ----------------------
doc/README.scrapyard | 8 ++
include/configs/edb93xx.h | 269 ------------------------------------------
13 files changed, 8 insertions(+), 972 deletions(-)
delete mode 100644 board/edb93xx/Makefile
delete mode 100644 board/edb93xx/config.mk
delete mode 100644 board/edb93xx/early_udelay.h
delete mode 100644 board/edb93xx/edb93xx.c
delete mode 100644 board/edb93xx/flash_cfg.c
delete mode 100644 board/edb93xx/pll_cfg.c
delete mode 100644 board/edb93xx/pll_cfg.h
delete mode 100644 board/edb93xx/sdram_cfg.c
delete mode 100644 board/edb93xx/sdram_cfg.h
delete mode 100644 include/configs/edb93xx.h
diff --git a/MAKEALL b/MAKEALL
index 63315fb..289cd8b 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -318,14 +318,6 @@ LIST_ARM9=" \
aspenite \
da830evm \
da850evm \
- edb9301 \
- edb9302 \
- edb9302a \
- edb9307 \
- edb9307a \
- edb9312 \
- edb9315 \
- edb9315a \
edminiv2 \
guruplug \
imx27lite \
diff --git a/Makefile b/Makefile
index 676dc29..6cafb99 100644
--- a/Makefile
+++ b/Makefile
@@ -851,16 +851,6 @@ tx25_config : unconfig
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@$(MKCONFIG) $@ arm arm926ejs tx25 karo mx25
-edb9301_config \
-edb9302_config \
-edb9302a_config \
-edb9307_config \
-edb9307a_config \
-edb9312_config \
-edb9315_config \
-edb9315a_config: unconfig
- @$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx - ep93xx
-
#########################################################################
## XScale Systems
#########################################################################
diff --git a/board/edb93xx/Makefile b/board/edb93xx/Makefile
deleted file mode 100644
index dcaed06..0000000
--- a/board/edb93xx/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := edb93xx.o flash_cfg.o pll_cfg.o sdram_cfg.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/edb93xx/config.mk b/board/edb93xx/config.mk
deleted file mode 100644
index fab59ef..0000000
--- a/board/edb93xx/config.mk
+++ /dev/null
@@ -1,33 +0,0 @@
-LDSCRIPT := $(SRCTREE)/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
-
-ifdef CONFIG_EDB9301
-CONFIG_SYS_TEXT_BASE = 0x05700000
-endif
-
-ifdef CONFIG_EDB9302
-CONFIG_SYS_TEXT_BASE = 0x05700000
-endif
-
-ifdef CONFIG_EDB9302A
-CONFIG_SYS_TEXT_BASE = 0xc5700000
-endif
-
-ifdef CONFIG_EDB9307
-CONFIG_SYS_TEXT_BASE = 0x01f00000
-endif
-
-ifdef CONFIG_EDB9307A
-CONFIG_SYS_TEXT_BASE = 0xc1f00000
-endif
-
-ifdef CONFIG_EDB9312
-CONFIG_SYS_TEXT_BASE = 0x01f00000
-endif
-
-ifdef CONFIG_EDB9315
-CONFIG_SYS_TEXT_BASE = 0x01f00000
-endif
-
-ifdef CONFIG_EDB9315A
-CONFIG_SYS_TEXT_BASE = 0xc1f00000
-endif
diff --git a/board/edb93xx/early_udelay.h b/board/edb93xx/early_udelay.h
deleted file mode 100644
index 185283d..0000000
--- a/board/edb93xx/early_udelay.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/* delay execution before timers are initialized */
-static inline void early_udelay(uint32_t usecs)
-{
- /* loop takes 4 cycles at 5.0ns (fastest case, running at 200MHz) */
- register uint32_t loops = usecs * (1000 / 20);
-
- __asm__ volatile ("1:\n"
- "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0" (loops));
-}
diff --git a/board/edb93xx/edb93xx.c b/board/edb93xx/edb93xx.c
deleted file mode 100644
index dde30ff..0000000
--- a/board/edb93xx/edb93xx.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * (C) Copyright 2002 2003
- * Network Audio Technologies, Inc. <www.netaudiotech.com>
- * Adam Bezanson <bezanson@netaudiotech.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/ep93xx.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define MAX_BANK_SIZE 0x04000000 /* 64 MB */
-
-static ulong const bank_addr[CONFIG_NR_DRAM_BANKS] = {
- PHYS_SDRAM_1,
-#ifdef PHYS_SDRAM_2
- PHYS_SDRAM_2,
-#endif
-#ifdef PHYS_SDRAM_3
- PHYS_SDRAM_3,
-#endif
-#ifdef PHYS_SDRAM_4
- PHYS_SDRAM_4
-#endif
-};
-
-int board_init(void)
-{
- struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
-
- icache_enable();
-
-#ifdef USE_920T_MMU
- dcache_enable();
-#endif
-
- /*
- * set UARTBAUD bit to drive UARTs with 14.7456MHz instead of
- * 14.7456/2 MHz
- */
- uint32_t value = readl(&syscon->pwrcnt);
- value |= SYSCON_PWRCNT_UART_BAUD;
- writel(value, &syscon->pwrcnt);
-
- /* Enable the uart in devicecfg */
- value = readl(&syscon->devicecfg);
- value |= 1<<18 /* U1EN */;
- writel(0xAA, &syscon->sysswlock);
- writel(value, &syscon->devicecfg);
-
- /* Machine number, as defined in linux/arch/arm/tools/mach-types */
- gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
- /* We have a console */
- gd->have_console = 1;
-
- return 0;
-}
-
-int board_eth_init(bd_t *bd)
-{
- return ep93xx_eth_initialize(0, MAC_BASE);
-}
-
-int dram_init(void)
-{
- unsigned int *src, *dst;
- int i;
-
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
- const ulong bank_size = get_ram_size((long *)bank_addr[i],
- MAX_BANK_SIZE);
- if (bank_size) {
- gd->bd->bi_dram[i].start = bank_addr[i];
- gd->bd->bi_dram[i].size = bank_size;
- }
- }
-
- /* copy exception vectors */
- src = (unsigned int *)_armboot_start;
- dst = (unsigned int *)PHYS_SDRAM_1;
- memcpy(dst, src, 16 * sizeof(unsigned int));
-
- return 0;
-}
diff --git a/board/edb93xx/flash_cfg.c b/board/edb93xx/flash_cfg.c
deleted file mode 100644
index a4c2048..0000000
--- a/board/edb93xx/flash_cfg.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Flash setup for Cirrus edb93xx boards
- *
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/ep93xx.h>
-#include <asm/io.h>
-
-#define SMC_BCR6_VALUE (2 << SMC_BCR_IDCY_SHIFT | 5 << SMC_BCR_WST1_SHIFT | \
- SMC_BCR_BLE | 2 << SMC_BCR_WST2_SHIFT | \
- 1 << SMC_BCR_MW_SHIFT)
-
-void flash_cfg(void)
-{
- struct smc_regs *smc = (struct smc_regs *)SMC_BASE;
-
- writel(SMC_BCR6_VALUE, &smc->bcr6);
-}
diff --git a/board/edb93xx/pll_cfg.c b/board/edb93xx/pll_cfg.c
deleted file mode 100644
index a687af0..0000000
--- a/board/edb93xx/pll_cfg.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * PLL setup for Cirrus edb93xx boards
- *
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include "pll_cfg.h"
-#include "early_udelay.h"
-
-void pll_cfg(void)
-{
- struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
-
- /* setup PLL1 */
- writel(CLKSET1_VAL, &syscon->clkset1);
-
- /*
- * flush the pipeline
- * writing to CLKSET1 causes the EP93xx to enter standby for between
- * 8 ms to 16 ms, until PLL1 stabilizes
- */
- asm("nop");
- asm("nop");
- asm("nop");
- asm("nop");
- asm("nop");
-
- /* setup PLL2 */
- writel(CLKSET2_VAL, &syscon->clkset2);
-
- /*
- * the user's guide recommends to wait at least 1 ms for PLL2 to
- * stabilize
- */
- early_udelay(1000);
-}
diff --git a/board/edb93xx/pll_cfg.h b/board/edb93xx/pll_cfg.h
deleted file mode 100644
index 0b6f469..0000000
--- a/board/edb93xx/pll_cfg.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * PLL register values for Cirrus edb93xx boards
- *
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/arch/ep93xx.h>
-
-#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \
- defined(CONFIG_EDB9302A)
-/*
- * fclk_div: 2, nbyp1: 1, hclk_div: 5, pclk_div: 2
- * pll1_x1: 294912000.000000, pll1_x2ip: 36864000.000000,
- * pll1_x2: 331776000.000000, pll1_out: 331776000.000000
- */
-#define CLKSET1_VAL (7 << SYSCON_CLKSET_PLL_X2IPD_SHIFT | \
- 8 << SYSCON_CLKSET_PLL_X2FBD2_SHIFT | \
- 19 << SYSCON_CLKSET_PLL_X1FBD1_SHIFT | \
- 1 << SYSCON_CLKSET1_PCLK_DIV_SHIFT | \
- 3 << SYSCON_CLKSET1_HCLK_DIV_SHIFT | \
- SYSCON_CLKSET1_NBYP1 | \
- 1 << SYSCON_CLKSET1_FCLK_DIV_SHIFT)
-#elif defined(CONFIG_EDB9307) || defined(CONFIG_EDB9307A) || \
- defined CONFIG_EDB9312 || defined(CONFIG_EDB9315) || \
- defined(CONFIG_EDB9315A)
-/*
- * fclk_div: 2, nbyp1: 1, hclk_div: 4, pclk_div: 2
- * pll1_x1: 3096576000.000000, pll1_x2ip: 129024000.000000,
- * pll1_x2: 3999744000.000000, pll1_out: 1999872000.000000
- */
-#define CLKSET1_VAL (23 << SYSCON_CLKSET_PLL_X2IPD_SHIFT | \
- 30 << SYSCON_CLKSET_PLL_X2FBD2_SHIFT | \
- 20 << SYSCON_CLKSET_PLL_X1FBD1_SHIFT | \
- 1 << SYSCON_CLKSET1_PCLK_DIV_SHIFT | \
- 2 << SYSCON_CLKSET1_HCLK_DIV_SHIFT | \
- SYSCON_CLKSET1_NBYP1 | \
- 1 << SYSCON_CLKSET1_FCLK_DIV_SHIFT)
-#else
-#error "Undefined board"
-#endif
-
-/*
- * usb_div: 4, nbyp2: 1, pll2_en: 1
- * pll2_x1: 368640000.000000, pll2_x2ip: 15360000.000000,
- * pll2_x2: 384000000.000000, pll2_out: 192000000.000000
- */
-#define CLKSET2_VAL (23 << SYSCON_CLKSET_PLL_X2IPD_SHIFT | \
- 24 << SYSCON_CLKSET_PLL_X2FBD2_SHIFT | \
- 24 << SYSCON_CLKSET_PLL_X1FBD1_SHIFT | \
- 1 << SYSCON_CLKSET_PLL_PS_SHIFT | \
- SYSCON_CLKSET2_PLL2_EN | \
- SYSCON_CLKSET2_NBYP2 | \
- 3 << SYSCON_CLKSET2_USB_DIV_SHIFT)
diff --git a/board/edb93xx/sdram_cfg.c b/board/edb93xx/sdram_cfg.c
deleted file mode 100644
index 440ad11..0000000
--- a/board/edb93xx/sdram_cfg.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Copyright (C) 2009, 2010 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm/io.h>
-#include "sdram_cfg.h"
-#include "early_udelay.h"
-
-#define PROGRAM_MODE_REG(bank) (*(volatile uint32_t *) \
- (SDRAM_BASE_ADDR | SDRAM_BANK_SEL_##bank | SDRAM_MODE_REG_VAL))
-
-#define PRECHARGE_BANK(bank) (*(volatile uint32_t *) \
- (SDRAM_BASE_ADDR | SDRAM_BANK_SEL_##bank)) = 0
-
-static void precharge_all_banks(void);
-static void setup_refresh_timer(void);
-static void program_mode_registers(void);
-
-void sdram_cfg(void)
-{
- struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE;
-
- writel(SDRAM_DEVCFG_VAL, &sdram->SDRAM_DEVCFG_REG);
-
- /* Issue continous NOP commands */
- writel(GLCONFIG_INIT | GLCONFIG_MRS | GLCONFIG_CKE, &sdram->glconfig);
-
- early_udelay(200);
-
- precharge_all_banks();
-
- setup_refresh_timer();
-
- program_mode_registers();
-
- /* Select normal operation mode */
- writel(GLCONFIG_CKE, &sdram->glconfig);
-}
-
-static void precharge_all_banks(void)
-{
- struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE;
-
- /* Issue PRECHARGE ALL commands */
- writel(GLCONFIG_INIT | GLCONFIG_CKE, &sdram->glconfig);
-
- /*
- * Errata of most EP93xx revisions say that PRECHARGE ALL isn't always
- * issued
- *
- * Cirrus proposes a workaround which consists in performing a read from
- * each bank to force the precharge. This causes some boards to hang.
- * Writing to the SDRAM banks instead of reading has the same
- * side-effect (the SDRAM controller issues the necessary precharges),
- * but is known to work on all supported boards
- */
-
- PRECHARGE_BANK(0);
-
-#if (CONFIG_NR_DRAM_BANKS >= 2)
- PRECHARGE_BANK(1);
-#endif
-
-#if (CONFIG_NR_DRAM_BANKS >= 3)
- PRECHARGE_BANK(2);
-#endif
-
-#if (CONFIG_NR_DRAM_BANKS == 4)
- PRECHARGE_BANK(3);
-#endif
-}
-
-static void setup_refresh_timer(void)
-{
- struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE;
-
- /* Load refresh timer with 10 to issue refresh every 10 cycles */
- writel(0x0a, &sdram->refrshtimr);
-
- /*
- * Wait at least 80 clock cycles to provide 8 refresh cycles
- * to all SDRAMs
- */
- early_udelay(1);
-
- /*
- * Program refresh timer with normal value
- * We need 8192 refresh cycles every 64ms
- * at 15ns (HCLK >= 66MHz) per cycle:
- * 64ms / 8192 = 7.8125us
- * 7.8125us / 15ns = 520 (0x208)
- */
- /*
- * TODO: redboot uses 0x1e0 for the slowest possible device
- * but i don't understand how this value is calculated
- */
- writel(0x208, &sdram->refrshtimr);
-}
-
-static void program_mode_registers(void)
-{
- struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE;
-
- /* Select mode register update mode */
- writel(GLCONFIG_MRS | GLCONFIG_CKE, &sdram->glconfig);
-
- /*
- * The mode registers are programmed by performing a read from each
- * SDRAM bank. The value of the address that is read defines the value
- * that is written into the mode register
- */
-
- PROGRAM_MODE_REG(0);
-
-#if (CONFIG_NR_DRAM_BANKS >= 2)
- PROGRAM_MODE_REG(1);
-#endif
-
-#if (CONFIG_NR_DRAM_BANKS >= 3)
- PROGRAM_MODE_REG(2);
-#endif
-
-#if (CONFIG_NR_DRAM_BANKS == 4)
- PROGRAM_MODE_REG(3);
-#endif
-}
diff --git a/board/edb93xx/sdram_cfg.h b/board/edb93xx/sdram_cfg.h
deleted file mode 100644
index 757b63c..0000000
--- a/board/edb93xx/sdram_cfg.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/arch/ep93xx.h>
-
-#define SDRAM_BASE_ADDR PHYS_SDRAM_1
-
-#ifdef CONFIG_EDB93XX_SDCS0
-#define SDRAM_DEVCFG_REG devcfg0
-#elif defined(CONFIG_EDB93XX_SDCS3)
-#define SDRAM_DEVCFG_REG devcfg3
-#else
-#error "SDRAM bank configuration"
-#endif
-
-#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \
- defined(CONFIG_EDB9302A)
-/*
- * 1x Samsung K4S561632C-TC/L75 4M x 16bit x 4 banks SDRAM
- *
- * CLK cycle time min:
- * @ CAS latency = 3: 7.5ns
- * @ CAS latency = 2: 10ns
- * We're running at 66MHz (15ns cycle time) external bus speed (HCLK),
- * so it's safe to use CAS latency = 2
- *
- * RAS-to-CAS delay min:
- * 20ns
- * At 15ns cycle time, we use RAS-to-CAS delay = 2
- *
- * SROMLL = 1: Swap BA[1:0] with A[13:12], making the SDRAM appear
- * as four blocks of 8MB size, instead of eight blocks of 4MB size:
- *
- * EDB9301/EDB9302:
- *
- * 0x00000000 - 0x007fffff
- * 0x01000000 - 0x017fffff
- * 0x04000000 - 0x047fffff
- * 0x05000000 - 0x057fffff
- *
- *
- * EDB9302a:
- *
- * 0xc0000000 - 0xc07fffff
- * 0xc1000000 - 0xc17fffff
- * 0xc4000000 - 0xc47fffff
- * 0xc5000000 - 0xc57fffff
- *
- * BANKCOUNT = 1: This is a device with four banks
- */
-
-#define SDRAM_DEVCFG_VAL (SDRAM_DEVCFG_BANKCOUNT | \
- SDRAM_DEVCFG_SROMLL | \
- SDRAM_DEVCFG_CASLAT_2 | \
- SDRAM_DEVCFG_RASTOCAS_2 | \
- SDRAM_DEVCFG_EXTBUSWIDTH)
-
-/*
- * 16 bit ext. bus
- *
- * A[22:09] is output as SYA[13:0]
- * CAS latency: 2
- * Burst type: sequential
- * Burst length: 8 (required for 16 bit ext. bus)
- * SYA[13:0] = 0x0023
- */
-#define SDRAM_MODE_REG_VAL 0x4600
-
-#define SDRAM_BANK_SEL_0 0x00000000 /* A[22:21] = b00 */
-#define SDRAM_BANK_SEL_1 0x00200000 /* A[22:21] = b01 */
-#define SDRAM_BANK_SEL_2 0x00400000 /* A[22:21] = b10 */
-#define SDRAM_BANK_SEL_3 0x00600000 /* A[22:21] = b11 */
-
-#elif defined(CONFIG_EDB9307) || defined(CONFIG_EDB9307A) || \
- defined CONFIG_EDB9312 || defined(CONFIG_EDB9315) || \
- defined(CONFIG_EDB9315A)
-/*
- * 2x Samsung K4S561632C-TC/L75 4M x 16bit x 4 banks SDRAM
- *
- * CLK cycle time min:
- * @ CAS latency = 3: 7.5ns
- * @ CAS latency = 2: 10ns
- * We're running at 100MHz (10ns cycle time) external bus speed (HCLK),
- * so it's safe to use CAS latency = 2
- *
- * RAS-to-CAS delay min:
- * 20ns
- * At 10ns cycle time, we use RAS-to-CAS delay = 2
- *
- * EDB9307, EDB9312, EDB9315:
- *
- * 0x00000000 - 0x01ffffff
- * 0x04000000 - 0x05ffffff
- *
- *
- * EDB9307a, EDB9315a:
- *
- * 0xc0000000 - 0xc1ffffff
- * 0xc4000000 - 0xc5ffffff
- */
-
-#define SDRAM_DEVCFG_VAL (SDRAM_DEVCFG_BANKCOUNT | \
- SDRAM_DEVCFG_SROMLL | \
- SDRAM_DEVCFG_CASLAT_2 | \
- SDRAM_DEVCFG_RASTOCAS_2)
-
-/*
- * 32 bit ext. bus
- *
- * A[23:10] is output as SYA[13:0]
- * CAS latency: 2
- * Burst type: sequential
- * Burst length: 4
- * SYA[13:0] = 0x0022
- */
-#define SDRAM_MODE_REG_VAL 0x8800
-
-#define SDRAM_BANK_SEL_0 0x00000000 /* A[23:22] = b00 */
-#define SDRAM_BANK_SEL_1 0x00400000 /* A[23:22] = b01 */
-#define SDRAM_BANK_SEL_2 0x00800000 /* A[23:22] = b10 */
-#define SDRAM_BANK_SEL_3 0x00c00000 /* A[23:22] = b11 */
-#endif
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index e12208c..7bd445c 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,14 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+edb9301 arm arm920t - 2011-07-17
+edb9302 arm arm920t - 2011-07-17
+edb9302a arm arm920t - 2011-07-17
+edb9307 arm arm920t - 2011-07-17
+edb9307a arm arm920t - 2011-07-17
+edb9312 arm arm920t - 2011-07-17
+edb9315 arm arm920t - 2011-07-17
+edb9315a arm arm920t - 2011-07-17
B2 arm s3c44b0 - 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it>
armadillo arm arm720t - 2011-07-16 Rowel Atienza <rowel@diwalabs.com>
trab arm S3C2400 - 2011-05-01 Gary Jennejohn <garyj@denx.de>
diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h
deleted file mode 100644
index 19b7632..0000000
--- a/include/configs/edb93xx.h
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * U-boot - Configuration file for Cirrus Logic EDB93xx boards
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#ifdef CONFIG_edb9301
-#define CONFIG_EDB9301
-#elif defined(CONFIG_edb9302)
-#define CONFIG_EDB9302
-#elif defined(CONFIG_edb9302a)
-#define CONFIG_EDB9302A
-#elif defined(CONFIG_edb9307)
-#define CONFIG_EDB9307
-#elif defined(CONFIG_edb9307a)
-#define CONFIG_EDB9307A
-#elif defined(CONFIG_edb9312)
-#define CONFIG_EDB9312
-#elif defined(CONFIG_edb9315)
-#define CONFIG_EDB9315
-#elif defined(CONFIG_edb9315a)
-#define CONFIG_EDB9315A
-#else
-#error "no board defined"
-#endif
-
-/* Initial environment and monitor configuration options. */
-#define CONFIG_BOOTDELAY 2
-#define CONFIG_CMDLINE_TAG 1
-#define CONFIG_INITRD_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_BOOTARGS "root=/dev/nfs console=ttyAM0,115200 ip=dhcp"
-#define CONFIG_BOOTFILE "edb93xx.img"
-
-#define CONFIG_SYS_HUSH_PARSER 1
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-#ifdef CONFIG_EDB9301
-#define CONFIG_EP9301
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9301
-#define CONFIG_SYS_PROMPT "EDB9301> "
-#define CONFIG_ENV_SECT_SIZE 0x00020000
-#elif defined(CONFIG_EDB9302)
-#define CONFIG_EP9302
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9302
-#define CONFIG_SYS_PROMPT "EDB9302> "
-#define CONFIG_ENV_SECT_SIZE 0x00020000
-#elif defined(CONFIG_EDB9302A)
-#define CONFIG_EP9302
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9302A
-#define CONFIG_SYS_PROMPT "EDB9302A> "
-#define CONFIG_ENV_SECT_SIZE 0x00020000
-#elif defined(CONFIG_EDB9307)
-#define CONFIG_EP9307
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9307
-#define CONFIG_SYS_PROMPT "EDB9307> "
-#define CONFIG_ENV_SECT_SIZE 0x00040000
-#elif defined(CONFIG_EDB9307A)
-#define CONFIG_EP9307
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9307A
-#define CONFIG_SYS_PROMPT "EDB9307A> "
-#define CONFIG_ENV_SECT_SIZE 0x00040000
-#elif defined(CONFIG_EDB9312)
-#define CONFIG_EP9312
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9312
-#define CONFIG_SYS_PROMPT "EDB9312> "
-#define CONFIG_ENV_SECT_SIZE 0x00040000
-#elif defined(CONFIG_EDB9315)
-#define CONFIG_EP9315
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9315
-#define CONFIG_SYS_PROMPT "EDB9315> "
-#define CONFIG_ENV_SECT_SIZE 0x00040000
-#elif defined(CONFIG_EDB9315A)
-#define CONFIG_EP9315
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9315A
-#define CONFIG_SYS_PROMPT "EDB9315A> "
-#define CONFIG_ENV_SECT_SIZE 0x00040000
-#else
-#error "no board defined"
-#endif
-
-/* High-level configuration options */
-#define CONFIG_ARM920T 1 /* This is an ARM920T core... */
-#define CONFIG_EP93XX 1 /* in a Cirrus Logic 93xx SoC */
-
-#define CONFIG_SYS_CLK_FREQ 14745600 /* EP93xx has a 14.7456 clock */
-#define CONFIG_SYS_HZ 1000 /* decr freq: 1 ms ticks */
-#undef CONFIG_USE_IRQ /* Don't need IRQ/FIQ */
-
-/* Monitor configuration */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_SETGETDCR
-#undef CONFIG_CMD_XIMG
-
-#undef CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_JFFS2
-
-#define CONFIG_SYS_LONGHELP /* Enable "long" help in mon */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
-/* Print buffer size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-/* Boot argument buffer size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */
-
-/* Serial port hardware configuration */
-#define CONFIG_PL010_SERIAL
-#define CONFIG_CONS_INDEX 0
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
-#define CONFIG_SYS_SERIAL0 0x808C0000
-#define CONFIG_SYS_SERIAL1 0x808D0000
-#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
- (void *)CONFIG_SYS_SERIAL1}
-
-/* Status LED */
-#define CONFIG_STATUS_LED 1 /* Status LED enabled */
-#define CONFIG_BOARD_SPECIFIC_LED 1
-#define STATUS_LED_GREEN 0
-#define STATUS_LED_RED 1
-/* Green */
-#define STATUS_LED_BIT STATUS_LED_GREEN
-#define STATUS_LED_STATE STATUS_LED_ON
-#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
-/* Red */
-#define STATUS_LED_BIT1 STATUS_LED_RED
-#define STATUS_LED_STATE1 STATUS_LED_OFF
-#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
-/* Optional value */
-#define STATUS_LED_BOOT STATUS_LED_BIT
-
-/* Network hardware configuration */
-#define CONFIG_DRIVER_EP93XX_MAC
-#define CONFIG_MII_SUPPRESS_PREAMBLE
-#define CONFIG_MII
-#define CONFIG_PHY_ADDR 1
-#define CONFIG_NET_MULTI
-#undef CONFIG_NETCONSOLE
-
-/* SDRAM configuration */
-#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302)
-/*
- * EDB9301/2 has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
- * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
- * the SROMLL bit on the processor, resulting in this non-contiguous memory map.
- */
-#define CONFIG_NR_DRAM_BANKS 4
-#define PHYS_SDRAM_1 0x00000000
-#define PHYS_SDRAM_SIZE_1 0x00800000
-#define PHYS_SDRAM_2 0x01000000
-#define PHYS_SDRAM_SIZE_2 0x00800000
-#define PHYS_SDRAM_3 0x04000000
-#define PHYS_SDRAM_SIZE_3 0x00800000
-#define PHYS_SDRAM_4 0x05000000
-#define PHYS_SDRAM_SIZE_4 0x00800000
-#define CONFIG_EDB93XX_SDCS3
-#define CONFIG_SYS_MEMTEST_START 0x00100000
-#define CONFIG_SYS_MEMTEST_END 0x007fffff
-
-#elif defined(CONFIG_EDB9302A)
-/*
- * EDB9302a has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
- * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
- * the SROMLL bit on the processor, resulting in this non-contiguous memory map.
- */
-#define CONFIG_NR_DRAM_BANKS 4
-#define PHYS_SDRAM_1 0xc0000000
-#define PHYS_SDRAM_SIZE_1 0x00800000
-#define PHYS_SDRAM_2 0xc1000000
-#define PHYS_SDRAM_SIZE_2 0x00800000
-#define PHYS_SDRAM_3 0xc4000000
-#define PHYS_SDRAM_SIZE_3 0x00800000
-#define PHYS_SDRAM_4 0xc5000000
-#define PHYS_SDRAM_SIZE_4 0x00800000
-#define CONFIG_EDB93XX_SDCS0
-#define CONFIG_SYS_MEMTEST_START 0xc0100000
-#define CONFIG_SYS_MEMTEST_END 0xc07fffff
-
-#elif defined(CONFIG_EDB9307) || defined CONFIG_EDB9312 || \
- defined(CONFIG_EDB9315)
-/*
- * The EDB9307, EDB9312, and EDB9315 have 2 banks of SDRAM consisting of
- * 2x Samsung K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of
- * 64 MB of SDRAM.
- */
-#define CONFIG_NR_DRAM_BANKS 2
-#define PHYS_SDRAM_1 0x00000000
-#define PHYS_SDRAM_SIZE_1 0x02000000
-#define PHYS_SDRAM_2 0x04000000
-#define PHYS_SDRAM_SIZE_2 0x02000000
-#define CONFIG_EDB93XX_SDCS3
-#define CONFIG_SYS_MEMTEST_START 0x00100000
-#define CONFIG_SYS_MEMTEST_END 0x01e00000
-
-#elif defined(CONFIG_EDB9307A) || defined(CONFIG_EDB9315A)
-/*
- * The EDB9307A and EDB9315A have 2 banks of SDRAM consisting of 2x Samsung
- * K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of 64 MB of SDRAM.
- */
-#define CONFIG_NR_DRAM_BANKS 2
-#define PHYS_SDRAM_1 0xc0000000
-#define PHYS_SDRAM_SIZE_1 0x02000000
-#define PHYS_SDRAM_2 0xc4000000
-#define PHYS_SDRAM_SIZE_2 0x02000000
-#define CONFIG_EDB93XX_SDCS0
-#define CONFIG_SYS_MEMTEST_START 0xc0100000
-#define CONFIG_SYS_MEMTEST_END 0xc1e00000
-#endif
-
-/* Default load address */
-#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x01000000)
-
-/* Must match kernel config */
-#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
-
-/* Run-time memory allocatons */
-#define CONFIG_STACKSIZE (128 * 1024)
-
-#if defined(CONFIG_USE_IRQ)
-#define CONFIG_STACKSIZE_IRQ (4 * 1024)
-#define CONFIG_STACKSIZE_FIQ (4 * 1024)
-#endif
-
-#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
-
-/* -----------------------------------------------------------------------------
- * FLASH and environment organization
- *
- * The EDB9301 and EDB9302(a) have 1 bank of flash memory at 0x60000000
- * consisting of 1x Intel TE28F128J3C-150 128 Mbit flash on a 16-bit data bus,
- * for a total of 16 MB of CFI-compatible flash.
- *
- * The EDB9307(a), EDB9312, and EDB9315(a) have 1 bank of flash memory at
- * 0x60000000 consisting of 2x Micron MT28F128J3-12 128 Mbit flash on a 32-bit
- * data bus, for a total of 32 MB of CFI-compatible flash.
- *
- * EDB9301/02(a) EDB9307(a)/12/15(a)
- * 0x60000000 - 0x0003FFFF u-boot u-boot
- * 0x60040000 - 0x0005FFFF environment #1 environment #1
- * 0x60060000 - 0x0007FFFF environment #2 environment #1 (continued)
- * 0x60080000 - 0x0009FFFF unused environment #2
- * 0x600A0000 - 0x000BFFFF unused environment #2 (continued)
- * 0x600C0000 - 0x00FFFFFF unused unused
- * 0x61000000 - 0x01FFFFFF not present unused
- */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 128
-
-#define PHYS_FLASH_1 0x60000000
-#define CONFIG_SYS_FLASH_BASE (PHYS_FLASH_1)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
-
-#define CONFIG_ENV_OVERWRITE /* Vendor params unprotected */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR 0x60040000
-
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-
-#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-#endif /* !defined (__CONFIG_H) */
--
1.7.6
^ permalink raw reply related [flat|nested] 35+ messages in thread* [U-Boot] [PATCH v2 04/16] ARM: remove broken "lpd7a40x" boards
2011-08-26 12:25 ` [U-Boot] [PATCH v2 00/16] " Wolfgang Denk
` (2 preceding siblings ...)
2011-08-26 12:25 ` [U-Boot] [PATCH v2 03/16] ARM: remove broken "edb93xx" boards Wolfgang Denk
@ 2011-08-26 12:25 ` Wolfgang Denk
2011-08-26 12:25 ` [U-Boot] [PATCH v2 05/16] ARM: remove broken "mx1fs2" board Wolfgang Denk
` (11 subsequent siblings)
15 siblings, 0 replies; 35+ messages in thread
From: Wolfgang Denk @ 2011-08-26 12:25 UTC (permalink / raw)
To: u-boot
Remove lpd7a400 and lpd7a404 boards.
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
board/lpd7a40x/Makefile | 51 ----
board/lpd7a40x/config.mk | 38 ---
board/lpd7a40x/flash.c | 490 ----------------------------------------
board/lpd7a40x/lowlevel_init.S | 212 -----------------
board/lpd7a40x/lpd7a40x.c | 93 --------
boards.cfg | 2 -
doc/README.scrapyard | 1 +
include/configs/lpd7a400-10.h | 80 -------
include/configs/lpd7a400.h | 117 ----------
include/configs/lpd7a404-10.h | 80 -------
include/configs/lpd7a404.h | 117 ----------
12 files changed, 1 insertions(+), 1281 deletions(-)
delete mode 100644 board/lpd7a40x/Makefile
delete mode 100644 board/lpd7a40x/config.mk
delete mode 100644 board/lpd7a40x/flash.c
delete mode 100644 board/lpd7a40x/lowlevel_init.S
delete mode 100644 board/lpd7a40x/lpd7a40x.c
delete mode 100644 include/configs/lpd7a400-10.h
delete mode 100644 include/configs/lpd7a400.h
delete mode 100644 include/configs/lpd7a404-10.h
delete mode 100644 include/configs/lpd7a404.h
diff --git a/MAKEALL b/MAKEALL
index 289cd8b..1f6baba 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -323,7 +323,6 @@ LIST_ARM9=" \
imx27lite \
jadecpu \
km_kirkwood \
- lpd7a400 \
magnesium \
mv88f6281gtw_ge \
mx1ads \
diff --git a/board/lpd7a40x/Makefile b/board/lpd7a40x/Makefile
deleted file mode 100644
index 3aeb2fb..0000000
--- a/board/lpd7a40x/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := lpd7a40x.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/lpd7a40x/config.mk b/board/lpd7a40x/config.mk
deleted file mode 100644
index 003e707..0000000
--- a/board/lpd7a40x/config.mk
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-# Logic ZOOM LH7A400 SDK board w/Logic LH7A400-10 card engine
-# w/Sharp LH7A400 SoC (ARM920T) cpu
-#
-
-#
-# 32 or 64 MB SDRAM on SDCSC0 @ 0xc0000000
-#
-# Linux-Kernel is @ 0xC0008000, entry 0xc0008000
-# params @ 0xc0000100
-# optionally with a ramdisk at 0xc0300000
-#
-# we load ourself to 0xc1fc0000 (32M - 256K)
-#
-# download area is 0xc0f00000
-#
-
-CONFIG_SYS_TEXT_BASE = 0xc1fc0000
-#CONFIG_SYS_TEXT_BASE = 0x00000000
diff --git a/board/lpd7a40x/flash.c b/board/lpd7a40x/flash.c
deleted file mode 100644
index f5c0713..0000000
--- a/board/lpd7a40x/flash.c
+++ /dev/null
@@ -1,490 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* #define DEBUG */
-
-#include <common.h>
-#include <environment.h>
-
-#define FLASH_BANK_SIZE 0x1000000 /* 16MB (2 x 8 MB) */
-#define MAIN_SECT_SIZE 0x40000 /* 256KB (2 x 128kB) */
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-
-#define CMD_READ_ARRAY 0x00FF00FF
-#define CMD_IDENTIFY 0x00900090
-#define CMD_ERASE_SETUP 0x00200020
-#define CMD_ERASE_CONFIRM 0x00D000D0
-#define CMD_PROGRAM 0x00400040
-#define CMD_RESUME 0x00D000D0
-#define CMD_SUSPEND 0x00B000B0
-#define CMD_STATUS_READ 0x00700070
-#define CMD_STATUS_RESET 0x00500050
-
-#define BIT_BUSY 0x00800080
-#define BIT_ERASE_SUSPEND 0x00400040
-#define BIT_ERASE_ERROR 0x00200020
-#define BIT_PROGRAM_ERROR 0x00100010
-#define BIT_VPP_RANGE_ERROR 0x00080008
-#define BIT_PROGRAM_SUSPEND 0x00040004
-#define BIT_PROTECT_ERROR 0x00020002
-#define BIT_UNDEFINED 0x00010001
-
-#define BIT_SEQUENCE_ERROR 0x00300030
-#define BIT_TIMEOUT 0x80000000
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init (void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
-
- flash_info[i].flash_id =
- (INTEL_MANUFACT & FLASH_VENDMASK) |
- (INTEL_ID_28F640J3A & FLASH_TYPEMASK);
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- if (i == 0)
- flashbase = CONFIG_SYS_FLASH_BASE;
- else
- panic ("configured too many flash banks!\n");
- for (j = 0; j < flash_info[i].sector_count; j++) {
- flash_info[i].start[j] = flashbase;
-
- /* uniform sector size */
- flashbase += MAIN_SECT_SIZE;
- }
- size += flash_info[i].size;
- }
-
- /*
- * Protect monitor and environment sectors
- */
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, &flash_info[0]);
-
-#ifdef CONFIG_ENV_ADDR_REDUND
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR_REDUND,
- CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[0]);
-#endif
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (INTEL_MANUFACT & FLASH_VENDMASK):
- printf ("Intel: ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (INTEL_ID_28F640J3A & FLASH_TYPEMASK):
- printf ("2x 28F640J3A (64Mbit)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- return;
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_error (ulong code)
-{
- /* Check bit patterns */
- /* SR.7=0 is busy, SR.7=1 is ready */
- /* all other flags indicate error on 1 */
- /* SR.0 is undefined */
- /* Timeout is our faked flag */
-
- /* sequence is described in Intel 290644-005 document */
-
- /* check Timeout */
- if (code & BIT_TIMEOUT) {
- puts ("Timeout\n");
- return ERR_TIMOUT;
- }
-
- /* check Busy, SR.7 */
- if (~code & BIT_BUSY) {
- puts ("Busy\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Vpp low, SR.3 */
- if (code & BIT_VPP_RANGE_ERROR) {
- puts ("Vpp range error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Device Protect Error, SR.1 */
- if (code & BIT_PROTECT_ERROR) {
- puts ("Device protect error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Command Seq Error, SR.4 & SR.5 */
- if (code & BIT_SEQUENCE_ERROR) {
- puts ("Command seqence error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Block Erase Error, SR.5 */
- if (code & BIT_ERASE_ERROR) {
- puts ("Block erase error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Program Error, SR.4 */
- if (code & BIT_PROGRAM_ERROR) {
- puts ("Program error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Block Erase Suspended, SR.6 */
- if (code & BIT_ERASE_SUSPEND) {
- puts ("Block erase suspended\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Program Suspended, SR.2 */
- if (code & BIT_PROGRAM_SUSPEND) {
- puts ("Program suspended\n");
- return ERR_PROG_ERROR;
- }
-
- /* OK, no error */
- return ERR_OK;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- ulong result, result1;
- int iflag, prot, sect;
- int rc = ERR_OK;
- ulong start;
-
-#ifdef USE_920T_MMU
- int cflag;
-#endif
-
- debug ("flash_erase: s_first %d s_last %d\n", s_first, s_last);
-
- /* first look for protection bits */
-
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
-
- if ((s_first < 0) || (s_first > s_last)) {
- return ERR_INVAL;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (INTEL_MANUFACT & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
-#ifdef USE_920T_MMU
- cflag = dcache_status ();
- dcache_disable ();
-#endif
- iflag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-
- debug ("Erasing sector %2d @ %08lX... ",
- sect, info->start[sect]);
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- if (info->protect[sect] == 0) { /* not protected */
- vu_long *addr = (vu_long *) (info->start[sect]);
- ulong bsR7, bsR7_2, bsR5, bsR5_2;
-
- /* *addr = CMD_STATUS_RESET; */
- *addr = CMD_ERASE_SETUP;
- *addr = CMD_ERASE_CONFIRM;
-
- /* wait until flash is ready */
- do {
- /* check timeout */
- if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- *addr = CMD_STATUS_RESET;
- result = BIT_TIMEOUT;
- break;
- }
-
- *addr = CMD_STATUS_READ;
- result = *addr;
- bsR7 = result & (1 << 7);
- bsR7_2 = result & (1 << 23);
- } while (!bsR7 | !bsR7_2);
-
- *addr = CMD_STATUS_READ;
- result1 = *addr;
- bsR5 = result1 & (1 << 5);
- bsR5_2 = result1 & (1 << 21);
-#ifdef SAMSUNG_FLASH_DEBUG
- printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2);
- if (bsR5 != 0 && bsR5_2 != 0)
- printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2);
-#endif
-
- *addr = CMD_READ_ARRAY;
- *addr = CMD_RESUME;
-
- if ((rc = flash_error (result)) != ERR_OK)
- goto outahere;
-#if 0
- printf ("ok.\n");
- } else { /* it was protected */
-
- printf ("protected!\n");
-#endif
- }
- }
-
-outahere:
- /* allow flash to settle - wait 10 ms */
- udelay_masked (10000);
-
- if (iflag)
- enable_interrupts ();
-
-#ifdef USE_920T_MMU
- if (cflag)
- dcache_enable ();
-#endif
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
- vu_long *addr = (vu_long *) dest;
- ulong result;
- int rc = ERR_OK;
- int iflag;
- ulong start;
-
-#ifdef USE_920T_MMU
- int cflag;
-#endif
-
- /*
- * Check if Flash is (sufficiently) erased
- */
- result = *addr;
- if ((result & data) != data)
- return ERR_NOT_ERASED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- *@address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
-#ifdef USE_920T_MMU
- cflag = dcache_status ();
- dcache_disable ();
-#endif
- iflag = disable_interrupts ();
-
- /* *addr = CMD_STATUS_RESET; */
- *addr = CMD_PROGRAM;
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- /* wait until flash is ready */
- do {
- /* check timeout */
- if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- *addr = CMD_SUSPEND;
- result = BIT_TIMEOUT;
- break;
- }
-
- *addr = CMD_STATUS_READ;
- result = *addr;
- } while (~result & BIT_BUSY);
-
- /* *addr = CMD_READ_ARRAY; */
- *addr = CMD_STATUS_READ;
- result = *addr;
-
- rc = flash_error (result);
-
- if (iflag)
- enable_interrupts ();
-
-#ifdef USE_920T_MMU
- if (cflag)
- dcache_enable ();
-#endif
- *addr = CMD_READ_ARRAY;
- *addr = CMD_RESUME;
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int l;
- int i, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 24);
- }
- for (; i < 4 && cnt > 0; ++i) {
- data = (data >> 8) | (*src++ << 24);
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 4; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 24);
- }
-
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = *((vu_long *) src);
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- src += 4;
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return ERR_OK;
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 24);
- --cnt;
- }
- for (; i < 4; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 24);
- }
-
- return write_word (info, wp, data);
-}
diff --git a/board/lpd7a40x/lowlevel_init.S b/board/lpd7a40x/lowlevel_init.S
deleted file mode 100644
index de34fc6..0000000
--- a/board/lpd7a40x/lowlevel_init.S
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * Memory Setup - initialize memory controller(s) for devices required
- * to boot and relocate
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-
-
-/* memory controller */
-#define BCRX_DEFAULT (0x0000fbe0)
-#define BCRX_MW_8 (0x00000000)
-#define BCRX_MW_16 (0x10000000)
-#define BCRX_MW_32 (0x20000000)
-#define BCRX_PME (0x08000000)
-#define BCRX_WP (0x04000000)
-#define BCRX_WST2_SHIFT (11)
-#define BCRX_WST1_SHIFT (5)
-#define BCRX_IDCY_SHIFT (0)
-
-/* Bank0 Async Flash */
-#define BCR0 (0x80002000)
-#define BCR0_FLASH (BCRX_MW_32 | (0x08<<BCRX_WST2_SHIFT) | (0x0E<<BCRX_WST1_SHIFT))
-
-/* Bank1 Open */
-#define BCR1 (0x80002004)
-
-/* Bank2 Not used (EEPROM?) */
-#define BCR2 (0x80002008)
-
-/* Bank3 Not used */
-#define BCR3 (0x8000200C)
-
-/* Bank4 PC Card1 */
-
-/* Bank5 PC Card2 */
-
-/* Bank6 CPLD IO Controller Peripherals (slow) */
-#define BCR6 (0x80002018)
-#define BCR6_CPLD_SLOW (BCRX_DEFAULT | BCRX_MW_16)
-
-/* Bank7 CPLD IO Controller Peripherals (fast) */
-#define BCR7 (0x8000201C)
-#define BCR7_CPLD_FAST (BCRX_MW_16 | (0x16<<BCRX_WST2_SHIFT) | (0x16<<BCRX_WST1_SHIFT) | (0x2<<BCRX_IDCY_SHIFT))
-
-/* SDRAM */
-#define GBLCNFG (0x80002404)
-#define GC_CKE (0x80000000)
-#define GC_CKSD (0x40000000)
-#define GC_LCR (0x00000040)
-#define GC_SMEMBURST (0x00000020)
-#define GC_MRS (0x00000002)
-#define GC_INIT (0x00000001)
-
-#define GC_CMD_NORMAL (GC_CKE)
-#define GC_CMD_MODE (GC_CKE | GC_MRS)
-#define GC_CMD_SYNCFLASH_LOAD (GC_CKE | GC_MRS | GC_LCR)
-#define GC_CMD_PRECHARGEALL (GC_CKE | GC_INIT)
-#define GC_CMD_NOP (GC_CKE | GC_INIT | GC_MRS)
-
-#define RFSHTMR (0x80002408)
-#define RFSHTMR_INIT (10) /* period=100 ns, HCLK=100Mhz, (2048+1-15.6*66) */
-#define RFSHTMR_NORMAL (1500) /* period=15.6 us, HCLK=100Mhz, (2048+1-15.6*66) */
-
-#define SDCSCX_BASE (0x80002410)
-#define SDCSCX_DEFAULT (0x01220008)
-#define SDCSCX_AUTOPC (0x01000000)
-#define SDCSCX_RAS2CAS_2 (0x00200000)
-#define SDCSCX_RAS2CAS_3 (0x00300000)
-#define SDCSCX_WBL (0x00080000)
-#define SDCSCX_CASLAT_8 (0x00070000)
-#define SDCSCX_CASLAT_7 (0x00060000)
-#define SDCSCX_CASLAT_6 (0x00050000)
-#define SDCSCX_CASLAT_5 (0x00040000)
-#define SDCSCX_CASLAT_4 (0x00030000)
-#define SDCSCX_CASLAT_3 (0x00020000)
-#define SDCSCX_CASLAT_2 (0x00010000)
-#define SDCSCX_2KPAGE (0x00000040)
-#define SDCSCX_SROMLL (0x00000020)
-#define SDCSCX_SROM512 (0x00000010)
-#define SDCSCX_4BNK (0x00000008)
-#define SDCSCX_2BNK (0x00000000)
-#define SDCSCX_EBW_16 (0x00000004)
-#define SDCSCX_EBW_32 (0x00000000)
-
-#define SDRAM_BASE (0xC0000000)
-#define SDCSC_BANK_OFFSET (0x10000000)
-
-/*
- * The SDRAM DEVICE MODE PROGRAMMING VALUE
- */
-#define BURST_LENGTH_4 (2 << 10)
-#define BURST_LENGTH_8 (3 << 10)
-#define WBURST_LENGTH_BL (0 << 19)
-#define WBURST_LENGTH_SINGLE (1 << 19)
-#define CAS_2 (2 << 14)
-#define CAS_3 (3 << 14)
-#define BAT_SEQUENTIAL (0 << 13)
-#define BAT_INTERLEAVED (1 << 13)
-#define OPM_NORMAL (0 << 17)
-#define SDRAM_DEVICE_MODE (WBURST_LENGTH_BL|OPM_NORMAL|CAS_3|BAT_SEQUENTIAL|BURST_LENGTH_4)
-
-
-#define TIMER1_BASE (0x80000C00)
-
-/*
- * special lookup flags
- */
-#define DO_MEM_DELAY 1
-#define DO_MEM_READ 2
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE
-
-.globl lowlevel_init
-lowlevel_init:
- mov r9, lr @ save return address
-
- /* memory control configuration */
- /* make r0 relative the current location so that it */
- /* reads INITMEM_DATA out of FLASH rather than memory ! */
- /* r0 = current word pointer */
- /* r1 = end word location, one word past last actual word */
- /* r3 = address for writes, special lookup flags */
- /* r4 = value for writes, delay constants, or read addresses */
- /* r2 = location for mem reads */
-
- ldr r0, =INITMEM_DATA
- ldr r1, _TEXT_BASE
- sub r0, r0, r1
- add r1, r0, #112
-
-mem_loop:
- cmp r1, r0
- moveq pc, r9 @ Done
-
- ldr r3, [r0], #4 @ Fetch Destination Register Address, or 1 for delay
- ldr r4, [r0], #4 @ value
-
- cmp r3, #DO_MEM_DELAY
- bleq mem_delay
- beq mem_loop
- cmp r3, #DO_MEM_READ
- ldreq r2, [r4]
- beq mem_loop
- str r4, [r3] @ normal register/ram store
- b mem_loop
-
-mem_delay:
- ldr r5, =TIMER1_BASE
- mov r6, r4, LSR #1 @ timer resolution is ~2us
- str r6, [r5]
- mov r6, #0x88 @ using 508.469KHz clock, enable
- str r6, [r5, #8]
-0: ldr r6, [r5, #4] @ timer value
- cmp r6, #0
- bne 0b
- mov r6, #0 @ disable timer
- str r6, [r5, #8]
- mov pc, lr
-
- .ltorg
-/* the literal pools origin */
-
-INITMEM_DATA:
- .word BCR0
- .word BCR0_FLASH
- .word BCR6
- .word BCR6_CPLD_SLOW
- .word BCR7
- .word BCR7_CPLD_FAST
- .word SDCSCX_BASE
- .word (SDCSCX_RAS2CAS_3 | SDCSCX_CASLAT_3 | SDCSCX_SROMLL | SDCSCX_4BNK | SDCSCX_EBW_32)
- .word GBLCNFG
- .word GC_CMD_NOP
- .word DO_MEM_DELAY
- .word 200
- .word GBLCNFG
- .word GC_CMD_PRECHARGEALL
- .word RFSHTMR
- .word RFSHTMR_INIT
- .word DO_MEM_DELAY
- .word 8
- .word RFSHTMR
- .word RFSHTMR_NORMAL
- .word GBLCNFG
- .word GC_CMD_MODE
- .word DO_MEM_READ
- .word (SDRAM_BASE | SDRAM_DEVICE_MODE)
- .word GBLCNFG
- .word GC_CMD_NORMAL
- .word SDCSCX_BASE
- .word (SDCSCX_AUTOPC | SDCSCX_RAS2CAS_3 | SDCSCX_CASLAT_3 | SDCSCX_SROMLL | SDCSCX_4BNK | SDCSCX_EBW_32)
diff --git a/board/lpd7a40x/lpd7a40x.c b/board/lpd7a40x/lpd7a40x.c
deleted file mode 100644
index 437dad0..0000000
--- a/board/lpd7a40x/lpd7a40x.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#if defined(CONFIG_LH7A400)
-#include <lh7a400.h>
-#elif defined(CONFIG_LH7A404)
-#include <lh7a404.h>
-#else
-#error "No CPU defined!"
-#endif
-#include <asm/mach-types.h>
-
-#include <lpd7a400_cpld.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* set up the I/O ports */
-
- /* enable flash programming */
- *(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_FLASH_REG)) |= FLASH_FPEN;
-
- /* Auto wakeup, LCD disable, WLAN enable */
- *(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_CECTL_REG)) &=
- ~(CECTL_AWKP|CECTL_LCDV|CECTL_WLPE);
-
- /* Status LED 2 on (leds are active low) */
- *(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_EXTGPIO_REG)) =
- (EXTGPIO_STATUS1|EXTGPIO_GPIO1) & ~(EXTGPIO_STATUS2);
-
-#if defined(CONFIG_LH7A400)
- /* arch number of Logic-Board - MACH_TYPE_LPD7A400 */
- gd->bd->bi_arch_number = MACH_TYPE_LPD7A400;
-#elif defined(CONFIG_LH7A404)
- /* arch number of Logic-Board - MACH_TYPE_LPD7A400 */
- gd->bd->bi_arch_number = MACH_TYPE_LPD7A404;
-#endif
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0xc0000100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC91111
- rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/boards.cfg b/boards.cfg
index 91bcee8..54ff361 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -212,8 +212,6 @@ actux4 arm ixp
dvlhost arm ixp
ixdp425 arm ixp
ixdpg425 arm ixp ixdp425
-lpd7a400 arm lh7a40x lpd7a40x
-lpd7a404 arm lh7a40x lpd7a40x
balloon3 arm pxa
cerf250 arm pxa
colibri_pxa270 arm pxa
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 7bd445c..d6c47fa 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+lpd7a404 arm lh7a40x - 2011-07-17
edb9301 arm arm920t - 2011-07-17
edb9302 arm arm920t - 2011-07-17
edb9302a arm arm920t - 2011-07-17
diff --git a/include/configs/lpd7a400-10.h b/include/configs/lpd7a400-10.h
deleted file mode 100644
index 91bf1fa..0000000
--- a/include/configs/lpd7a400-10.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Logic LH7A400-10 card engine
- */
-
-#ifndef __LPD7A400_10_H
-#define __LPD7A400_10_H
-
-
-#define CONFIG_ARM920T 1 /* arm920t core */
-#define CONFIG_LH7A40X 1 /* Sharp LH7A40x SoC family */
-#define CONFIG_LH7A400 1 /* Sharp LH7A400 S0C */
-
-/* The system clock PLL input frequency */
-#define CONFIG_SYS_CLK_FREQ 14745600 /* System Clock PLL Input (Hz) */
-
-/* ticks per second */
-#define CONFIG_SYS_HZ (508469)
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-
-#define CONFIG_SYS_FLASH_BASE 0x00000000 /* Flash Bank #1 */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT (64) /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/*----------------------------------------------------------------------
- * Using SMC91C111 LAN chip
- *
- * Default IO base of chip is 0x300, Card Engine has this address lines
- * (LAN chip) tied to Vcc, so we just care about the chip select
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE (0x70000000)
-#undef CONFIG_SMC_USE_32_BIT
-
-#endif /* __LPD7A400_10_H */
diff --git a/include/configs/lpd7a400.h b/include/configs/lpd7a400.h
deleted file mode 100644
index 06f3d7e..0000000
--- a/include/configs/lpd7a400.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __LPD7A400_H_
-#define __LPD7A400_H_
-
-#define CONFIG_LPD7A400 /* Logic LH7A400 SDK */
-
-#undef CONFIG_USE_IRQ
-
-/*
- * This board uses the logic LH7A400-10 card engine
- */
-#include <configs/lpd7a400-10.h>
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * select serial console configuration
- */
-#define CONFIG_LH7A40X_SERIAL
-#define CONFIG_CONSOLE_UART2 /* UART2 LH7A40x for console */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_IPADDR 192.168.1.100
-#define CONFIG_NETMASK 255.255.1.0
-#define CONFIG_SERVERIP 192.168.1.1
-
-#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#ifndef USE_920T_MMU
- #define CONFIG_CMD_PING
- #undef CONFIG_CMD_CACHE
-#else
- #define CONFIG_CMD_DATE
-#endif
-
-
-#define CONFIG_BOOTDELAY 3
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "LPD7A400> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0xc0300000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xc0500000 /* 2 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xc0f00000 /* default load address */
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/* size and location of u-boot in flash */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN (256<<10)
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-
-/* Address and size of Primary Environment Sector */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0xFC0000)
-#define CONFIG_ENV_SIZE 0x40000
-
-#endif /* __LPD7A400_H_ */
diff --git a/include/configs/lpd7a404-10.h b/include/configs/lpd7a404-10.h
deleted file mode 100644
index b10e69d..0000000
--- a/include/configs/lpd7a404-10.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Logic LH7A400-10 card engine
- */
-
-#ifndef __LPD7A404_10_H
-#define __LPD7A404_10_H
-
-
-#define CONFIG_ARM920T 1 /* arm920t core */
-#define CONFIG_LH7A40X 1 /* Sharp LH7A40x SoC family */
-#define CONFIG_LH7A404 1 /* Sharp LH7A404 SoC */
-
-/* The system clock PLL input frequency */
-#define CONFIG_SYS_CLK_FREQ 14745600 /* System Clock PLL Input (Hz) */
-
-/* ticks per second */
-#define CONFIG_SYS_HZ (508469)
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-
-#define CONFIG_SYS_FLASH_BASE 0x00000000 /* Flash Bank #1 */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT (64) /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/*----------------------------------------------------------------------
- * Using SMC91C111 LAN chip
- *
- * Default IO base of chip is 0x300, Card Engine has this address lines
- * (LAN chip) tied to Vcc, so we just care about the chip select
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE (0x70000000)
-#undef CONFIG_SMC_USE_32_BIT
-
-#endif /* __LPD7A404_10_H */
diff --git a/include/configs/lpd7a404.h b/include/configs/lpd7a404.h
deleted file mode 100644
index 7535f62..0000000
--- a/include/configs/lpd7a404.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __LPD7A404_H_
-#define __LPD7A404_H_
-
-#define CONFIG_LPD7A404 /* Logic LH7A400 SDK */
-
-#undef CONFIG_USE_IRQ
-
-/*
- * This board uses the logic LH7A404-10 card engine
- */
-#include <configs/lpd7a404-10.h>
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * select serial console configuration
- */
-#define CONFIG_LH7A40X_SERIAL
-#define CONFIG_CONSOLE_UART2 /* UART2 LH7A40x for console */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_IPADDR 192.168.1.100
-#define CONFIG_NETMASK 255.255.1.0
-#define CONFIG_SERVERIP 192.168.1.1
-
-#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#ifndef USE_920T_MMU
- #define CONFIG_CMD_PING
- #undef CONFIG_CMD_CACHE
-#else
- #define CONFIG_CMD_DATE
-#endif
-
-
-#define CONFIG_BOOTDELAY 3
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "LPD7A404> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0xc0300000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xc0500000 /* 2 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xc0f00000 /* default load address */
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/* size and location of u-boot in flash */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN (256<<10)
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-
-/* Address and size of Primary Environment Sector */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0xFC0000)
-#define CONFIG_ENV_SIZE 0x40000
-
-#endif /* __LPD7A404_H_ */
--
1.7.6
^ permalink raw reply related [flat|nested] 35+ messages in thread* [U-Boot] [PATCH v2 05/16] ARM: remove broken "mx1fs2" board
2011-08-26 12:25 ` [U-Boot] [PATCH v2 00/16] " Wolfgang Denk
` (3 preceding siblings ...)
2011-08-26 12:25 ` [U-Boot] [PATCH v2 04/16] ARM: remove broken "lpd7a40x" boards Wolfgang Denk
@ 2011-08-26 12:25 ` Wolfgang Denk
2011-08-26 12:25 ` [U-Boot] [PATCH v2 06/16] ARM: remove broken "netstar" board Wolfgang Denk
` (10 subsequent siblings)
15 siblings, 0 replies; 35+ messages in thread
From: Wolfgang Denk @ 2011-08-26 12:25 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
board/mx1fs2/Makefile | 51 ---
board/mx1fs2/config.mk | 10 -
board/mx1fs2/flash.c | 849 ------------------------------------------
board/mx1fs2/intel.h | 99 -----
board/mx1fs2/lowlevel_init.S | 188 ----------
board/mx1fs2/mx1fs2.c | 122 ------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/mx1fs2.h | 305 ---------------
10 files changed, 1 insertions(+), 1626 deletions(-)
delete mode 100644 board/mx1fs2/Makefile
delete mode 100644 board/mx1fs2/config.mk
delete mode 100644 board/mx1fs2/flash.c
delete mode 100644 board/mx1fs2/intel.h
delete mode 100644 board/mx1fs2/lowlevel_init.S
delete mode 100644 board/mx1fs2/mx1fs2.c
delete mode 100644 include/configs/mx1fs2.h
diff --git a/MAKEALL b/MAKEALL
index 1f6baba..8eaa0d5 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -326,7 +326,6 @@ LIST_ARM9=" \
magnesium \
mv88f6281gtw_ge \
mx1ads \
- mx1fs2 \
netstar \
nhk8815 \
nhk8815_onenand \
diff --git a/board/mx1fs2/Makefile b/board/mx1fs2/Makefile
deleted file mode 100644
index c55b695..0000000
--- a/board/mx1fs2/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := mx1fs2.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/mx1fs2/config.mk b/board/mx1fs2/config.mk
deleted file mode 100644
index eb4d046..0000000
--- a/board/mx1fs2/config.mk
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# This config file is used for compilation of IMX sources
-#
-# You might change location of U-Boot in memory by setting right CONFIG_SYS_TEXT_BASE.
-# This allows for example having one copy located at the end of ram and stored
-# in flash device and later on while developing use other location to test
-# the code in RAM device only.
-#
-
-CONFIG_SYS_TEXT_BASE = 0x08f00000
diff --git a/board/mx1fs2/flash.c b/board/mx1fs2/flash.c
deleted file mode 100644
index da4ebe6..0000000
--- a/board/mx1fs2/flash.c
+++ /dev/null
@@ -1,849 +0,0 @@
-/*
- * (C) 2000-2004 Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- * (C) 2003 August Hoeraendl, Logotronic GmbH
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#undef CONFIG_FLASH_16BIT
-
-#include <common.h>
-
-#define FLASH_BANK_SIZE MX1FS2_FLASH_BANK_SIZE
-#define MAIN_SECT_SIZE MX1FS2_FLASH_SECT_SIZE
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*
- * NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
- * has nothing to do with the flash chip being 8-bit or 16-bit.
- */
-#ifdef CONFIG_FLASH_16BIT
-typedef unsigned short FLASH_PORT_WIDTH;
-typedef volatile unsigned short FLASH_PORT_WIDTHV;
-
-#define FLASH_ID_MASK 0xFFFF
-#else
-typedef unsigned long FLASH_PORT_WIDTH;
-typedef volatile unsigned long FLASH_PORT_WIDTHV;
-
-#define FLASH_ID_MASK 0xFFFFFFFF
-#endif
-
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
-
-#define ORMASK(size) ((-size) & OR_AM_MSK)
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-#if 0
-static ulong flash_get_size(FPWV * addr, flash_info_t * info);
-static void flash_get_offsets(ulong base, flash_info_t * info);
-#endif
-static void flash_reset(flash_info_t * info);
-static int write_word_intel(flash_info_t * info, FPWV * dest, FPW data);
-static int write_word_amd(flash_info_t * info, FPWV * dest, FPW data);
-#define write_word(in, de, da) write_word_amd(in, de, da)
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-static void flash_sync_real_protect(flash_info_t * info);
-#endif
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-ulong
-flash_init(void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
- flash_info[i].flash_id =
- (FLASH_MAN_AMD & FLASH_VENDMASK) |
- (FLASH_AM640U & FLASH_TYPEMASK);
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- switch (i) {
- case 0:
- flashbase = MX1FS2_FLASH_BASE;
- break;
- default:
- panic("configured too many flash banks!\n");
- break;
- }
- for (j = 0; j < flash_info[i].sector_count; j++) {
- flash_info[i].start[j] = flashbase + j * MAIN_SECT_SIZE;
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + _bss_start - _armboot_start,
- &flash_info[0]);
-
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void
-flash_reset(flash_info_t * info)
-{
- FPWV *base = (FPWV *) (info->start[0]);
-
- /* Put FLASH back in read mode */
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
- *base = (FPW) 0x00FF00FF; /* Intel Read Mode */
- else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
- *base = (FPW) 0x00F000F0; /* AMD Read Mode */
-}
-
-/*-----------------------------------------------------------------------
- */
-#if 0
-static void
-flash_get_offsets(ulong base, flash_info_t * info)
-{
- int i;
-
- /* set up sector start address table */
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL
- && (info->flash_id & FLASH_BTYPE)) {
- int bootsect_size; /* number of bytes/boot sector */
- int sect_size; /* number of bytes/regular sector */
-
- bootsect_size = 0x00002000 * (sizeof (FPW) / 2);
- sect_size = 0x00010000 * (sizeof (FPW) / 2);
-
- /* set sector offsets for bottom boot block type */
- for (i = 0; i < 8; ++i) {
- info->start[i] = base + (i * bootsect_size);
- }
- for (i = 8; i < info->sector_count; i++) {
- info->start[i] = base + ((i - 7) * sect_size);
- }
- } else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD
- && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U) {
-
- int sect_size; /* number of bytes/sector */
-
- sect_size = 0x00010000 * (sizeof (FPW) / 2);
-
- /* set up sector start address table (uniform sector type) */
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * sect_size);
- }
-}
-#endif /* 0 */
-
-/*-----------------------------------------------------------------------
- */
-
-void
-flash_print_info(flash_info_t * info)
-{
- int i;
- uchar *boottype;
- uchar *bootletter;
- char *fmt;
- uchar botbootletter[] = "B";
- uchar topbootletter[] = "T";
- uchar botboottype[] = "bottom boot sector";
- uchar topboottype[] = "top boot sector";
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- printf("AMD ");
- break;
- case FLASH_MAN_BM:
- printf("BRIGHT MICRO ");
- break;
- case FLASH_MAN_FUJ:
- printf("FUJITSU ");
- break;
- case FLASH_MAN_SST:
- printf("SST ");
- break;
- case FLASH_MAN_STM:
- printf("STM ");
- break;
- case FLASH_MAN_INTEL:
- printf("INTEL ");
- break;
- default:
- printf("Unknown Vendor ");
- break;
- }
-
- /* check for top or bottom boot, if it applies */
- if (info->flash_id & FLASH_BTYPE) {
- boottype = botboottype;
- bootletter = botbootletter;
- } else {
- boottype = topboottype;
- bootletter = topbootletter;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM640U:
- fmt = "29LV641D (64 Mbit, uniform sectors)\n";
- break;
- case FLASH_28F800C3B:
- case FLASH_28F800C3T:
- fmt = "28F800C3%s (8 Mbit, %s)\n";
- break;
- case FLASH_INTEL800B:
- case FLASH_INTEL800T:
- fmt = "28F800B3%s (8 Mbit, %s)\n";
- break;
- case FLASH_28F160C3B:
- case FLASH_28F160C3T:
- fmt = "28F160C3%s (16 Mbit, %s)\n";
- break;
- case FLASH_INTEL160B:
- case FLASH_INTEL160T:
- fmt = "28F160B3%s (16 Mbit, %s)\n";
- break;
- case FLASH_28F320C3B:
- case FLASH_28F320C3T:
- fmt = "28F320C3%s (32 Mbit, %s)\n";
- break;
- case FLASH_INTEL320B:
- case FLASH_INTEL320T:
- fmt = "28F320B3%s (32 Mbit, %s)\n";
- break;
- case FLASH_28F640C3B:
- case FLASH_28F640C3T:
- fmt = "28F640C3%s (64 Mbit, %s)\n";
- break;
- case FLASH_INTEL640B:
- case FLASH_INTEL640T:
- fmt = "28F640B3%s (64 Mbit, %s)\n";
- break;
- default:
- fmt = "Unknown Chip Type\n";
- break;
- }
-
- printf(fmt, bootletter, boottype);
-
- printf(" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf(" Sector Start Addresses:");
-
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0) {
- printf("\n ");
- }
-
- printf(" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
-
- printf("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-#if 0
-ulong
-flash_get_size(FPWV * addr, flash_info_t * info)
-{
- /* Write auto select command: read Manufacturer ID */
-
- /* Write auto select command sequence and test FLASH answer */
- addr[0x0555] = (FPW) 0x00AA00AA; /* for AMD, Intel ignores this */
- addr[0x02AA] = (FPW) 0x00550055; /* for AMD, Intel ignores this */
- addr[0x0555] = (FPW) 0x00900090; /* selects Intel or AMD */
-
- /* The manufacturer codes are only 1 byte, so just use 1 byte.
- * This works for any bus width and any FLASH device width.
- */
- switch (addr[0] & 0xff) {
-
- case (uchar) AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
-
- case (uchar) INTEL_MANUFACT:
- info->flash_id = FLASH_MAN_INTEL;
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- break;
- }
-
- /* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
- if (info->flash_id != FLASH_UNKNOWN)
- switch (addr[1]) {
-
- case (FPW) AMD_ID_LV640U: /* 29LV640 and 29LV641 have same ID */
- info->flash_id += FLASH_AM640U;
- info->sector_count = 128;
- info->size = 0x00800000 * (sizeof (FPW) / 2);
- break; /* => 8 or 16 MB */
-
- case (FPW) INTEL_ID_28F800C3B:
- info->flash_id += FLASH_28F800C3B;
- info->sector_count = 23;
- info->size = 0x00100000 * (sizeof (FPW) / 2);
- break; /* => 1 or 2 MB */
-
- case (FPW) INTEL_ID_28F800B3B:
- info->flash_id += FLASH_INTEL800B;
- info->sector_count = 23;
- info->size = 0x00100000 * (sizeof (FPW) / 2);
- break; /* => 1 or 2 MB */
-
- case (FPW) INTEL_ID_28F160C3B:
- info->flash_id += FLASH_28F160C3B;
- info->sector_count = 39;
- info->size = 0x00200000 * (sizeof (FPW) / 2);
- break; /* => 2 or 4 MB */
-
- case (FPW) INTEL_ID_28F160B3B:
- info->flash_id += FLASH_INTEL160B;
- info->sector_count = 39;
- info->size = 0x00200000 * (sizeof (FPW) / 2);
- break; /* => 2 or 4 MB */
-
- case (FPW) INTEL_ID_28F320C3B:
- info->flash_id += FLASH_28F320C3B;
- info->sector_count = 71;
- info->size = 0x00400000 * (sizeof (FPW) / 2);
- break; /* => 4 or 8 MB */
-
- case (FPW) INTEL_ID_28F320B3B:
- info->flash_id += FLASH_INTEL320B;
- info->sector_count = 71;
- info->size = 0x00400000 * (sizeof (FPW) / 2);
- break; /* => 4 or 8 MB */
-
- case (FPW) INTEL_ID_28F640C3B:
- info->flash_id += FLASH_28F640C3B;
- info->sector_count = 135;
- info->size = 0x00800000 * (sizeof (FPW) / 2);
- break; /* => 8 or 16 MB */
-
- case (FPW) INTEL_ID_28F640B3B:
- info->flash_id += FLASH_INTEL640B;
- info->sector_count = 135;
- info->size = 0x00800000 * (sizeof (FPW) / 2);
- break; /* => 8 or 16 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* => no or unknown flash */
- }
-
- flash_get_offsets((ulong) addr, info);
-
- /* Put FLASH back in read mode */
- flash_reset(info);
-
- return (info->size);
-}
-#endif /* 0 */
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-/*-----------------------------------------------------------------------
- */
-
-static void
-flash_sync_real_protect(flash_info_t * info)
-{
- FPWV *addr = (FPWV *) (info->start[0]);
- FPWV *sect;
- int i;
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F800C3B:
- case FLASH_28F800C3T:
- case FLASH_28F160C3B:
- case FLASH_28F160C3T:
- case FLASH_28F320C3B:
- case FLASH_28F320C3T:
- case FLASH_28F640C3B:
- case FLASH_28F640C3T:
- /* check for protected sectors */
- *addr = (FPW) 0x00900090;
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02.
- * D0 = 1 for each device if protected.
- * If at least one device is protected the sector is marked
- * protected, but mixed protected and unprotected devices
- * within a sector should never happen.
- */
- sect = (FPWV *) (info->start[i]);
- info->protect[i] =
- (sect[2] & (FPW) (0x00010001)) ? 1 : 0;
- }
-
- /* Put FLASH back in read mode */
- flash_reset(info);
- break;
-
- case FLASH_AM640U:
- default:
- /* no hardware protect that we support */
- break;
- }
-}
-#endif
-
-/*-----------------------------------------------------------------------
- */
-
-int
-flash_erase(flash_info_t * info, int s_first, int s_last)
-{
- FPWV *addr;
- int flag, prot, sect;
- int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
- ulong start, now, last;
- int rcode = 0;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf("- missing\n");
- } else {
- printf("- no sectors to erase\n");
- }
- return 1;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_INTEL800B:
- case FLASH_INTEL160B:
- case FLASH_INTEL320B:
- case FLASH_INTEL640B:
- case FLASH_28F800C3B:
- case FLASH_28F160C3B:
- case FLASH_28F320C3B:
- case FLASH_28F640C3B:
- case FLASH_AM640U:
- break;
- case FLASH_UNKNOWN:
- default:
- printf("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf("\n");
- }
-
- start = get_timer(0);
- last = start;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && rcode == 0; sect++) {
-
- if (info->protect[sect] != 0) /* protected, skip it */
- continue;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr = (FPWV *) (info->start[sect]);
- if (intel) {
- *addr = (FPW) 0x00500050; /* clear status register */
- *addr = (FPW) 0x00200020; /* erase setup */
- *addr = (FPW) 0x00D000D0; /* erase confirm */
- } else {
- /* must be AMD style if not Intel */
- FPWV *base; /* first address in bank */
-
- base = (FPWV *) (info->start[0]);
- base[0x0555] = (FPW) 0x00AA00AA; /* unlock */
- base[0x02AA] = (FPW) 0x00550055; /* unlock */
- base[0x0555] = (FPW) 0x00800080; /* erase mode */
- base[0x0555] = (FPW) 0x00AA00AA; /* unlock */
- base[0x02AA] = (FPW) 0x00550055; /* unlock */
- *addr = (FPW) 0x00300030; /* erase sector */
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 50us for AMD, 80us for Intel.
- * Let's wait 1 ms.
- */
- udelay(1000);
-
- while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if ((now = get_timer(0)) - start > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf("Timeout\n");
-
- if (intel) {
- /* suspend erase */
- *addr = (FPW) 0x00B000B0;
- }
-
- flash_reset(info); /* reset to read mode */
- rcode = 1; /* failed */
- break;
- }
-
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc('.');
- last = now;
- }
- }
-
- flash_reset(info); /* reset to read mode */
- }
-
- printf(" done\n");
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int
-bad_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
- int bytes; /* number of bytes to program in current word */
- int left; /* number of bytes left to program */
- int i, res;
-
- for (left = cnt, res = 0;
- left > 0 && res == 0;
- addr += sizeof (data), left -= sizeof (data) - bytes) {
-
- bytes = addr & (sizeof (data) - 1);
- addr &= ~(sizeof (data) - 1);
-
- /* combine source and destination data so can program
- * an entire word of 16 or 32 bits
- */
- for (i = 0; i < sizeof (data); i++) {
- data <<= 8;
- if (i < bytes || i - bytes >= left)
- data += *((uchar *) addr + i);
- else
- data += *src++;
- }
-
- /* write one word to the flash */
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- res = write_word_amd(info, (FPWV *) addr, data);
- break;
- case FLASH_MAN_INTEL:
- res = write_word_intel(info, (FPWV *) addr, data);
- break;
- default:
- /* unknown flash type, error! */
- printf("missing or unknown FLASH type\n");
- res = 1; /* not really a timeout, but gives error */
- break;
- }
- }
-
- return (res);
-}
-
-/**
- * write_buf: - Copy memory to flash.
- *
- * @param info:
- * @param src: source of copy transaction
- * @param addr: where to copy to
- * @param cnt: number of bytes to copy
- *
- * @return error code
- */
-
-int
-write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- FPW data;
- int l;
- int i, rc;
-
- wp = (addr & ~1); /* get lower word aligned address */
-
- /* handle unaligned start bytes */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
- for (; i < 2 && cnt > 0; ++i) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- if ((rc = write_word(info, (FPWV *)wp, data)) != 0) {
- return (rc);
- }
- wp += 2;
- }
-
- /* handle word aligned part */
- while (cnt >= 2) {
- /* data = *((vushort*)src); */
- data = *((FPW *) src);
- if ((rc = write_word(info, (FPWV *)wp, data)) != 0) {
- return (rc);
- }
- src += sizeof (FPW);
- wp += sizeof (FPW);
- cnt -= sizeof (FPW);
- }
-
- if (cnt == 0)
- return ERR_OK;
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- }
- for (; i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- return write_word(info, (FPWV *)wp, data);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int
-write_word_amd(flash_info_t * info, FPWV * dest, FPW data)
-{
- ulong start;
- int flag;
- int res = 0; /* result, assume success */
- FPWV *base; /* first address in flash bank */
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest & data) != data) {
- return (2);
- }
-
- base = (FPWV *) (info->start[0]);
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- base[0x0555] = (FPW) 0x00AA00AA; /* unlock */
- base[0x02AA] = (FPW) 0x00550055; /* unlock */
- base[0x0555] = (FPW) 0x00A000A0; /* selects program mode */
-
- *dest = data; /* start programming the data */
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- start = get_timer(0);
-
- /* data polling for D7 */
- while (res == 0
- && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) {
- if (get_timer(0) - start > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *dest = (FPW) 0x00F000F0; /* reset bank */
- printf("SHA timeout\n");
- res = 1;
- }
- }
-
- return (res);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for Intel FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int
-write_word_intel(flash_info_t * info, FPWV * dest, FPW data)
-{
- ulong start;
- int flag;
- int res = 0; /* result, assume success */
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest & data) != data) {
- return (2);
- }
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- *dest = (FPW) 0x00500050; /* clear status register */
- *dest = (FPW) 0x00FF00FF; /* make sure in read mode */
- *dest = (FPW) 0x00400040; /* program setup */
-
- *dest = data; /* start programming the data */
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- start = get_timer(0);
-
- while (res == 0 && (*dest & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *dest = (FPW) 0x00B000B0; /* Suspend program */
- res = 1;
- }
- }
-
- if (res == 0 && (*dest & (FPW) 0x00100010))
- res = 1; /* write failed, time out error is close enough */
-
- *dest = (FPW) 0x00500050; /* clear status register */
- *dest = (FPW) 0x00FF00FF; /* make sure in read mode */
-
- return (res);
-}
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-/*-----------------------------------------------------------------------
- */
-int
-flash_real_protect(flash_info_t * info, long sector, int prot)
-{
- int rcode = 0; /* assume success */
- FPWV *addr; /* address of sector */
- FPW value;
-
- addr = (FPWV *) (info->start[sector]);
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F800C3B:
- case FLASH_28F800C3T:
- case FLASH_28F160C3B:
- case FLASH_28F160C3T:
- case FLASH_28F320C3B:
- case FLASH_28F320C3T:
- case FLASH_28F640C3B:
- case FLASH_28F640C3T:
- flash_reset(info); /* make sure in read mode */
- *addr = (FPW) 0x00600060L; /* lock command setup */
- if (prot)
- *addr = (FPW) 0x00010001L; /* lock sector */
- else
- *addr = (FPW) 0x00D000D0L; /* unlock sector */
- flash_reset(info); /* reset to read mode */
-
- /* now see if it really is locked/unlocked as requested */
- *addr = (FPW) 0x00900090;
- /* read sector protection at sector address, (A7 .. A0) = 0x02.
- * D0 = 1 for each device if protected.
- * If at least one device is protected the sector is marked
- * protected, but return failure. Mixed protected and
- * unprotected devices within a sector should never happen.
- */
- value = addr[2] & (FPW) 0x00010001;
- if (value == 0)
- info->protect[sector] = 0;
- else if (value == (FPW) 0x00010001)
- info->protect[sector] = 1;
- else {
- /* error, mixed protected and unprotected */
- rcode = 1;
- info->protect[sector] = 1;
- }
- if (info->protect[sector] != prot)
- rcode = 1; /* failed to protect/unprotect as requested */
-
- /* reload all protection bits from hardware for now */
- flash_sync_real_protect(info);
- break;
-
- case FLASH_AM640U:
- default:
- /* no hardware protect that we support */
- info->protect[sector] = prot;
- break;
- }
-
- return rcode;
-}
-#endif
diff --git a/board/mx1fs2/intel.h b/board/mx1fs2/intel.h
deleted file mode 100644
index 8db5dd4..0000000
--- a/board/mx1fs2/intel.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Copyright (C) 2002 ETC s.r.o.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the ETC s.r.o. nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * Written by Marcel Telka <marcel@telka.sk>, 2002.
- *
- * Documentation:
- * [1] Intel Corporation, "3 Volt Intel Strata Flash Memory 28F128J3A, 28F640J3A,
- * 28F320J3A (x8/x16)", April 2002, Order Number: 290667-011
- * [2] Intel Corporation, "3 Volt Synchronous Intel Strata Flash Memory 28F640K3, 28F640K18,
- * 28F128K3, 28F128K18, 28F256K3, 28F256K18 (x16)", June 2002, Order Number: 290737-005
- *
- * This file is taken from OpenWinCE project hosted by SourceForge.net
- *
- */
-
-#ifndef FLASH_INTEL_H
-#define FLASH_INTEL_H
-
-#include <common.h>
-
-/* Intel CFI commands - see Table 4. in [1] and Table 3. in [2] */
-
-#define CFI_INTEL_CMD_READ_ARRAY 0xFF /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_READ_IDENTIFIER 0x90 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_READ_QUERY 0x98 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_READ_STATUS_REGISTER 0x70 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_CLEAR_STATUS_REGISTER 0x50 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_PROGRAM1 0x40 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_PROGRAM2 0x10 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_WRITE_TO_BUFFER 0xE8 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_CONFIRM 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_BLOCK_ERASE 0x20 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_SUSPEND 0xB0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_RESUME 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_LOCK_SETUP 0x60 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_LOCK_BLOCK 0x01 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_UNLOCK_BLOCK 0xD0 /* 28FxxxJ3A - unlocks all blocks, 28FFxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_LOCK_DOWN_BLOCK 0x2F /* 28FxxxK3, 28FxxxK18 */
-
-/* Intel CFI Status Register bits - see Table 6. in [1] and Table 7. in [2] */
-
-#define CFI_INTEL_SR_READY 1 << 7 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_ERASE_SUSPEND 1 << 6 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_ERASE_ERROR 1 << 5 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_PROGRAM_ERROR 1 << 4 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_VPEN_ERROR 1 << 3 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_PROGRAM_SUSPEND 1 << 2 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_BLOCK_LOCKED 1 << 1 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_BEFP 1 << 0 /* 28FxxxK3, 28FxxxK18 */
-
-/* Intel flash device ID codes for 28FxxxJ3A - see Table 5. in [1] */
-
-#define CFI_CHIP_INTEL_28F320J3A 0x0016
-#define CFI_CHIPN_INTEL_28F320J3A "28F320J3A"
-#define CFI_CHIP_INTEL_28F640J3A 0x0017
-#define CFI_CHIPN_INTEL_28F640J3A "28F640J3A"
-#define CFI_CHIP_INTEL_28F128J3A 0x0018
-#define CFI_CHIPN_INTEL_28F128J3A "28F128J3A"
-
-/* Intel flash device ID codes for 28FxxxK3 and 28FxxxK18 - see Table 8. in [2] */
-
-#define CFI_CHIP_INTEL_28F640K3 0x8801
-#define CFI_CHIPN_INTEL_28F640K3 "28F640K3"
-#define CFI_CHIP_INTEL_28F128K3 0x8802
-#define CFI_CHIPN_INTEL_28F128K3 "28F128K3"
-#define CFI_CHIP_INTEL_28F256K3 0x8803
-#define CFI_CHIPN_INTEL_28F256K3 "28F256K3"
-#define CFI_CHIP_INTEL_28F640K18 0x8805
-#define CFI_CHIPN_INTEL_28F640K18 "28F640K18"
-#define CFI_CHIP_INTEL_28F128K18 0x8806
-#define CFI_CHIPN_INTEL_28F128K18 "28F128K18"
-#define CFI_CHIP_INTEL_28F256K18 0x8807
-#define CFI_CHIPN_INTEL_28F256K18 "28F256K18"
-
-#endif /* FLASH_INTEL_H */
diff --git a/board/mx1fs2/lowlevel_init.S b/board/mx1fs2/lowlevel_init.S
deleted file mode 100644
index 56a4819..0000000
--- a/board/mx1fs2/lowlevel_init.S
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * Copyright (C) 2004 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
- * 02111-1307, USA.
- *
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/imx-regs.h>
-
-.globl lowlevel_init
-lowlevel_init:
-
- mov r10, lr
-
-/* Change PERCLK1DIV to 14 ie 14+1 */
- ldr r0, =PCDR
- ldr r1, =CONFIG_SYS_PCDR_VAL
- str r1, [r0]
-
-/* set MCU PLL Control Register 0 */
-
- ldr r0, =MPCTL0
- ldr r1, =CONFIG_SYS_MPCTL0_VAL
- str r1, [r0]
-
-/* set MCU PLL Control Register 1 */
-
- ldr r0, =MPCTL1
- ldr r1, =CONFIG_SYS_MPCTL1_VAL
- str r1, [r0]
-
-/* set mpll restart bit */
- ldr r0, =CSCR
- ldr r1, [r0]
- orr r1,r1,#(1<<21)
- str r1, [r0]
-
- mov r2,#0x10
-1:
- mov r3,#0x2000
-2:
- subs r3,r3,#1
- bne 2b
-
- subs r2,r2,#1
- bne 1b
-
-/* set System PLL Control Register 0 */
-
- ldr r0, =SPCTL0
- ldr r1, =CONFIG_SYS_SPCTL0_VAL
- str r1, [r0]
-
-/* set System PLL Control Register 1 */
-
- ldr r0, =SPCTL1
- ldr r1, =CONFIG_SYS_SPCTL1_VAL
- str r1, [r0]
-
-/* set spll restart bit */
- ldr r0, =CSCR
- ldr r1, [r0]
- orr r1,r1,#(1<<22)
- str r1, [r0]
-
- mov r2,#0x10
-1:
- mov r3,#0x2000
-2:
- subs r3,r3,#1
- bne 2b
-
- subs r2,r2,#1
- bne 1b
-
- ldr r0, =CSCR
- ldr r1, =CONFIG_SYS_CSCR_VAL
- str r1, [r0]
-
- ldr r0, =GPCR
- ldr r1, =CONFIG_SYS_GPCR_VAL
- str r1, [r0]
-
-/*
- * I have now read the ARM920 DataSheet back-to-Back, and have stumbled upon
- * this.....
- *
- * It would appear that from a Cold-Boot the ARM920T enters "FastBus" mode CP15
- * register 1, this stops it using the output of the PLL and thus runs at the
- * slow rate. Unless you place the Core into "Asynch" mode, the CPU will never
- * use the value set in the CM_OSC registers...regardless of what you set it
- * too! Thus, although i thought i was running at 140MHz, i'm actually running
- *@40!..
- *
- * Slapping this into my bootloader does the trick...
- *
- * MRC p15,0,r0,c1,c0,0 ; read core configuration register
- * ORR r0,r0,#0xC0000000 ; set asynchronous clocks and not fastbus mode
- * MCR p15,0,r0,c1,c0,0 ; write modified value to core configuration
- * register
- *
- */
- MRC p15,0,r0,c1,c0,0
-/* ORR r0,r0,#0xC0000000 async mode */
-/* ORR r0,r0,#0x40000000 sync mode */
- ORR r0,r0,#0xC0000000
- MCR p15,0,r0,c1,c0,0
-
- ldr r0, =GIUS(0)
- ldr r1, =CONFIG_SYS_GIUS_A_VAL
- str r1, [r0]
-
- ldr r0, =FMCR
- ldr r1, =CONFIG_SYS_FMCR_VAL
- str r1, [r0]
-
- ldr r0, =CS0U
- ldr r1, =CONFIG_SYS_CS0U_VAL
- str r1, [r0]
-
- ldr r0, =CS0L
- ldr r1, =CONFIG_SYS_CS0L_VAL
- str r1, [r0]
-
- ldr r0, =CS1U
- ldr r1, =CONFIG_SYS_CS1U_VAL
- str r1, [r0]
-
- ldr r0, =CS1L
- ldr r1, =CONFIG_SYS_CS1L_VAL
- str r1, [r0]
-
- ldr r0, =CS4U
- ldr r1, =CONFIG_SYS_CS4U_VAL
- str r1, [r0]
-
- ldr r0, =CS4L
- ldr r1, =CONFIG_SYS_CS4L_VAL
- str r1, [r0]
-
- ldr r0, =CS5U
- ldr r1, =CONFIG_SYS_CS5U_VAL
- str r1, [r0]
-
- ldr r0, =CS5L
- ldr r1, =CONFIG_SYS_CS5L_VAL
- str r1, [r0]
-
-/* SDRAM Setup */
-
- ldr r1,=0x00221000 /* adr of SDCTRL0 */
- ldr r0,=0x92120200
- str r0,[r1,#0] /* put in precharge command mode */
- ldr r2,=0x08200000 /* adr for precharge cmd */
- ldr r0,[r2,#0] /* precharge */
- ldr r0,=0xA2120200
- ldr r2,=0x08000000 /* start of SDRAM */
- str r0,[r1,#0] /* put in auto-refresh mode */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,=0xB2120200
- ldr r2,=0x08111800
- str r0,[r1,#0] /* setup for mode register of SDRAM */
- ldr r0,[r2,#0] /* program mode register */
- ldr r0,=0x82124267
- str r0,[r1,#0] /* back to normal operation */
-
- mov pc,r10
diff --git a/board/mx1fs2/mx1fs2.c b/board/mx1fs2/mx1fs2.c
deleted file mode 100644
index 90a33c2..0000000
--- a/board/mx1fs2/mx1fs2.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Copyright (C) 2004 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <asm/arch/imx-regs.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
-
-extern void imx_gpio_mode(int gpio_mode);
-
-static void logo_init(void)
-{
- imx_gpio_mode(PD15_PF_LD0);
- imx_gpio_mode(PD16_PF_LD1);
- imx_gpio_mode(PD17_PF_LD2);
- imx_gpio_mode(PD18_PF_LD3);
- imx_gpio_mode(PD19_PF_LD4);
- imx_gpio_mode(PD20_PF_LD5);
- imx_gpio_mode(PD21_PF_LD6);
- imx_gpio_mode(PD22_PF_LD7);
- imx_gpio_mode(PD23_PF_LD8);
- imx_gpio_mode(PD24_PF_LD9);
- imx_gpio_mode(PD25_PF_LD10);
- imx_gpio_mode(PD26_PF_LD11);
- imx_gpio_mode(PD27_PF_LD12);
- imx_gpio_mode(PD28_PF_LD13);
- imx_gpio_mode(PD29_PF_LD14);
- imx_gpio_mode(PD30_PF_LD15);
- imx_gpio_mode(PD14_PF_FLM_VSYNC);
- imx_gpio_mode(PD13_PF_LP_HSYNC);
- imx_gpio_mode(PD6_PF_LSCLK);
- imx_gpio_mode(GPIO_PORTD | GPIO_OUT | GPIO_DR);
- imx_gpio_mode(PD11_PF_CONTRAST);
- imx_gpio_mode(PD10_PF_SPL_SPR);
-
- LCDC_RMCR = 0x00000000;
- LCDC_PCR = PCR_COLOR | PCR_PBSIZ_8 | PCR_BPIX_16 | PCR_PCD(5);
- LCDC_HCR = HCR_H_WIDTH(2);
- LCDC_VCR = VCR_V_WIDTH(2);
-
- LCDC_PWMR = 0x00000380; /* contrast to 0x80 middle (is best !!!) */
- LCDC_SSA = 0x10040000; /* image in flash */
-
- LCDC_SIZE = SIZE_XMAX(320) | SIZE_YMAX(240); /* screen size */
-
- LCDC_VPW = 0x000000A0; /* Virtual Page Width Register */
- LCDC_POS = 0x00000000; /* panning offset 0 (0 pixel offset) */
-
- /* disable Cursor */
- LCDC_CPOS = 0x00000000;
-
- /* fixed burst length */
- LCDC_DMACR = DMACR_BURST | DMACR_HM(8) | DMACR_TM(2);
-
- /* enable LCD */
- DR(3) |= 0x00001000;
- LCDC_RMCR = RMCR_LCDC_EN;
-
-}
-
-int
-board_init(void)
-{
- gd->bd->bi_arch_number = MACH_TYPE_MX1FS2;
- gd->bd->bi_boot_params = 0x08000100;
-serial_init();
- logo_init();
- return 0;
-}
-
-int
-dram_init(void)
-{
-#if ( CONFIG_NR_DRAM_BANKS > 0 )
- gd->bd->bi_dram[0].start = MX1FS2_SDRAM_1;
- gd->bd->bi_dram[0].size = MX1FS2_SDRAM_1_SIZE;
-#endif
- return 0;
-}
-
-/**
- * show_boot_progress: - indicate state of the boot process
- *
- * @param status: Status number - see README for details.
- *
- */
-
-void
-show_boot_progress(int status)
-{
- /* We use this as a hook to disable serial ports just before booting
- * This way we suppress the "uncompressing linux..." message
- */
-#ifdef CONFIG_SILENT_CONSOLE
- if( status == 8) {
- if( getenv("silent") != NULL ) {
- *(volatile unsigned long *)0x206080 &= ~1;
- *(volatile unsigned long *)0x207080 &= ~1;
- }
- }
-#endif
- return;
-}
diff --git a/boards.cfg b/boards.cfg
index 54ff361..39b9199 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -63,7 +63,6 @@ kb9202 arm arm920t - -
m501sk arm arm920t - - at91rm9200
at91rm9200dk arm arm920t - atmel at91rm9200
mx1ads arm arm920t - - imx
-mx1fs2 arm arm920t - - imx
scb9328 arm arm920t - - imx
cm4008 arm arm920t - - ks8695
cm41xx arm arm920t - - ks8695
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index d6c47fa..85d84d7 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+mx1fs2 arm arm920t - 2011-07-17
lpd7a404 arm lh7a40x - 2011-07-17
edb9301 arm arm920t - 2011-07-17
edb9302 arm arm920t - 2011-07-17
diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h
deleted file mode 100644
index ddbc65a..0000000
--- a/include/configs/mx1fs2.h
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- * Copyright (C) 2004 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_ARM920T 1 /* this is an ARM920T CPU */
-#define CONFIG_IMX 1 /* in a Motorola MC9328MXL Chip */
-#define CONFIG_MX1FS2 1 /* on a mx1fs2 board */
-#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */
-
-/*
- * Select serial console configuration
- */
-#undef _CONFIG_UART1 /* internal uart 1 */
-#define _CONFIG_UART2 /* internal uart 2 */
-#undef _CONFIG_UART3 /* internal uart 3 */
-#undef _CONFIG_UART4 /* internal uart 4 */
-#undef CONFIG_SILENT_CONSOLE /* use this to disable output */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_JFFS2
-
-#undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_SOURCE
-
-/*
- * Boot options. Setting delay to -1 stops autostart count down.
- */
-#define CONFIG_BOOTDELAY 10
-#define CONFIG_BOOTARGS "root=/dev/mtdblock4 console=ttySMX0,115200n8 rootfstype=jffs2"
-#define CONFIG_BOOTCOMMAND "bootm 10080000"
-#define CONFIG_SHOW_BOOT_PROGRESS
-
-/*
- * General options for u-boot. Modify to save memory foot print
- */
-#define CONFIG_SYS_LONGHELP /* undef saves memory */
-#define CONFIG_SYS_PROMPT "mx1fs2> " /* prompt string */
-#define CONFIG_SYS_CBSIZE 256 /* console I/O buffer */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size */
-#define CONFIG_SYS_MAXARGS 16 /* max command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot args buf size */
-
-#define CONFIG_SYS_MEMTEST_START 0x08100000 /* memtest test area */
-#define CONFIG_SYS_MEMTEST_END 0x08F00000
-
-#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
-#define CONFIG_SYS_CPUSPEED 0x141 /* core clock - register value */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_BAUDRATE 115200
-/*
- * Definitions related to passing arguments to kernel.
- */
-#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */
-#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */
-#define CONFIG_INITRD_TAG 1 /* send initrd params */
-
-/*
- * Malloc pool need to host env + 128 Kb reserve for other allocations.
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) )
-
-#define CONFIG_STACKSIZE (120<<10) /* stack size */
-
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */
-#endif
-
-/* SDRAM Setup Values
- * 0x910a8300 Precharge Command CAS 3
- * 0x910a8200 Precharge Command CAS 2
- *
- * 0xa10a8300 AutoRefresh Command CAS 3
- * 0xa10a8200 Set AutoRefresh Command CAS 2
- */
-#define PRECHARGE_CMD 0x910a8300
-#define AUTOREFRESH_CMD 0xa10a8300
-
-#define BUS32BIT_VERSION
-/*
- * SDRAM Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
-#define MX1FS2_SDRAM_1 0x08000000 /* SDRAM bank #1 */
-#ifdef BUS32BIT_VERSION
-#define MX1FS2_SDRAM_1_SIZE (0x04000000 - 0x100000) /* 64 MB - 1M Framebuffer */
-#else
-#define MX1FS2_SDRAM_1_SIZE (0x01FC0000 - 0x100000) /* 32 MB - 1M Framebuffer */
-#endif
-/*
- * Flash Controller settings
- */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/
-#define CONFIG_SYS_MAX_FLASH_SECT 256 /* number of sector in FLASH bank */
-
-#ifdef BUS32BIT_VERSION
-#define MX1FS2_FLASH_BUS_WIDTH 4 /* we use 32 bit FLASH memory... */
-#define MX1FS2_FLASH_INTERLEAVE 2 /* ... made of 2 chips */
-#define MX1FS2_FLASH_BANK_SIZE 0x02000000 /* size of one flash bank*/
-#define MX1FS2_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */
-#else
-#define MX1FS2_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */
-#define MX1FS2_FLASH_INTERLEAVE 1 /* ... made of 1 chip */
-#define MX1FS2_FLASH_BANK_SIZE 0x01000000 /* size of one flash bank*/
-#define MX1FS2_FLASH_SECT_SIZE 0x00010000 /* size of erase sector */
-#endif
-#define MX1FS2_FLASH_BASE 0x10000000 /* location of flash memory */
-#define MX1FS2_FLASH_UNLOCK 1 /* perform hw unlock first */
-
-/* This should be defined if CFI FLASH device is present. Actually benefit
- is not so clear to me. In other words we can provide more informations
- to user, but this expects more complex flash handling we do not provide
- now.*/
-#undef CONFIG_SYS_FLASH_CFI
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Erase operation */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Write operation */
-
-#define CONFIG_SYS_FLASH_BASE MX1FS2_FLASH_BASE
-
-/*
- * This is setting for JFFS2 support in u-boot.
- * Right now there is no gain for user, but later on booting kernel might be
- * possible. Consider using XIP kernel running from flash to save RAM
- * footprint.
- * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
- */
-
-/*
- * JFFS2 partitions
- */
-/* No command line, one static partition, whole device */
-/*
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00050000
-*/
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT "nor0=mx1fs2-0"
-
-#ifdef BUS32BIT_VERSION
-#define MTDPARTS_DEFAULT "mtdparts=mx1fs2-0:2m at 5m(part0),5m at 9m(part1)"
-#else
-#define MTDPARTS_DEFAULT "mtdparts=mx1fs2-0:-@320k(jffs2)"
-#endif
-
-/*
- * Environment setup. Definitions of monitor location and size with
- * definition of environment setup ends up in 2 possibilities.
- * 1. Embeded environment - in u-boot code is space for environment
- * 2. Environment is read from predefined sector of flash
- * Right now we support 2. possiblity, but expecting no env placed
- * on mentioned address right now. This also needs to provide whole
- * sector for it - for us 256Kb is really waste of memory. U-boot uses
- * default env. and until kernel parameters could be sent to kernel
- * env. has no sense to us.
- */
-
-#define CONFIG_SYS_MONITOR_BASE 0x10000000
-#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128b ( 1 flash sector ) */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR 0x10020000 /* absolute address for now */
-#define CONFIG_ENV_SIZE 0x20000
-
-#define CONFIG_ENV_OVERWRITE 1 /* env is not writable now */
-
-/* Setup CS4 and CS5 */
-#define CONFIG_SYS_GIUS_A_VAL 0x0003fffe
-
-/*
- * CSxU_VAL:
- * 63| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x|32
- * |DTACK_SEL|0|BCD | BCS | PSZ|PME|SYNC| DOL | CNC| WSC | 0| WWS | EDC |
- *
- * CSxL_VAL:
- * 31| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x| 0
- * | OEA | OEN | WEA | WEN | CSA |EBC| DSZ | 0|SP|0|WP| 0 0|PA|CSEN|
- */
-
-#define CONFIG_SYS_CS0U_VAL 0x00008C00
-#define CONFIG_SYS_CS0L_VAL 0x22222601
-#define CONFIG_SYS_CS1U_VAL 0x00008C00
-#define CONFIG_SYS_CS1L_VAL 0x22222301
-#define CONFIG_SYS_CS4U_VAL 0x00008C00
-#define CONFIG_SYS_CS4L_VAL 0x22222301
-#define CONFIG_SYS_CS5U_VAL 0x00008C00
-#define CONFIG_SYS_CS5L_VAL 0x22222301
-
-/* f_{dpll}=2*f{ref}*(MFI+MFN/(MFD+1))/(PD+1)
- f_ref=16,777MHz
-
- 0x002a141f: 191,9944MHz
- 0x040b2007: 144MHz
- 0x042a141f: 96MHz
- 0x0811140d: 64MHz
- 0x040e200e: 150MHz
- 0x00321431: 200MHz
-
- 0x08001800: 64MHz mit 16er Quarz
- 0x04001800: 96MHz mit 16er Quarz
- 0x04002400: 144MHz mit 16er Quarz
-
- 31 |x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x| 0
- |XXX|--PD---|-------MFD---------|XXX|--MFI--|-----MFN-----------| */
-
-#define CONFIG_SYS_MPCTL0_VAL 0x07E723AD
-#define CONFIG_SYS_MPCTL1_VAL 0x00000040
-#define CONFIG_SYS_PCDR_VAL 0x00010005
-#define CONFIG_SYS_GPCR_VAL 0x00000FFB
-
-#define USE_16M_OSZI /* If you have one, you want to use it
- The internal 32kHz oszillator jitters */
-#ifdef USE_16M_OSZI
-
-#define CONFIG_SYS_SPCTL0_VAL 0x04001401
-#define CONFIG_SYS_SPCTL1_VAL 0x0C000040
-#define CONFIG_SYS_CSCR_VAL 0x07030003
-#define CONFIG_SYS_CLK_FREQ 16780000
-#define CONFIG_SYSPLL_CLK_FREQ 16000000
-
-#else
-
-#define CONFIG_SYS_SPCTL0_VAL 0x07E716D1
-#define CONFIG_SYS_CSCR_VAL 0x06000003
-#define CONFIG_SYS_CLK_FREQ 16780000
-#define CONFIG_SYSPLL_CLK_FREQ 16780000
-
-#endif
-
-/*
- * Well this has to be defined, but on the other hand it is used differently
- * one may expect. For instance loadb command do not cares :-)
- * So advice is - do not relay on this...
- */
-#define CONFIG_SYS_LOAD_ADDR 0x08400000
-
-#define CONFIG_SYS_FMCR_VAL 0x00000003 /* Reset Default */
-
-/* Bit[0:3] contain PERCLK1DIV for UART 1
- 0x000b00b ->b<- -> 192MHz/12=16MHz
- 0x000b00b ->8<- -> 144MHz/09=16MHz
- 0x000b00b ->3<- -> 64MHz/4=16MHz */
-
-#ifdef _CONFIG_UART1
-#define CONFIG_IMX_SERIAL
-#define CONFIG_IMX_SERIAL1
-#elif defined _CONFIG_UART2
-#define CONFIG_IMX_SERIAL
-#define CONFIG_IMX_SERIAL2
-#elif defined _CONFIG_UART3 | defined _CONFIG_UART4
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_CLK 3686400
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_CONS_INDEX 1
-#ifdef _CONFIG_UART3
-#define CONFIG_SYS_NS16550_COM1 0x15000000
-#elif defined _CONFIG_UART4
-#define CONFIG_SYS_NS16550_COM1 0x16000000
-#endif
-#endif
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 35+ messages in thread* [U-Boot] [PATCH v2 06/16] ARM: remove broken "netstar" board
2011-08-26 12:25 ` [U-Boot] [PATCH v2 00/16] " Wolfgang Denk
` (4 preceding siblings ...)
2011-08-26 12:25 ` [U-Boot] [PATCH v2 05/16] ARM: remove broken "mx1fs2" board Wolfgang Denk
@ 2011-08-26 12:25 ` Wolfgang Denk
2011-08-26 12:25 ` [U-Boot] [PATCH v2 07/16] ARM: remove broken "sbc2410x" board Wolfgang Denk
` (9 subsequent siblings)
15 siblings, 0 replies; 35+ messages in thread
From: Wolfgang Denk @ 2011-08-26 12:25 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
Makefile | 1 -
board/netstar/Makefile | 95 ---------------
board/netstar/config.mk | 11 --
board/netstar/crcek.S | 241 --------------------------------------
board/netstar/crcek.h | 3 -
board/netstar/crcit.c | 87 --------------
board/netstar/eeprom.c | 218 ----------------------------------
board/netstar/netstar.c | 129 --------------------
board/netstar/setup.S | 284 ---------------------------------------------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/netstar.h | 245 --------------------------------------
13 files changed, 1 insertions(+), 1316 deletions(-)
delete mode 100644 board/netstar/Makefile
delete mode 100644 board/netstar/config.mk
delete mode 100644 board/netstar/crcek.S
delete mode 100644 board/netstar/crcek.h
delete mode 100644 board/netstar/crcit.c
delete mode 100644 board/netstar/eeprom.c
delete mode 100644 board/netstar/netstar.c
delete mode 100644 board/netstar/setup.S
delete mode 100644 include/configs/netstar.h
diff --git a/MAKEALL b/MAKEALL
index 8eaa0d5..ce987e8 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -326,7 +326,6 @@ LIST_ARM9=" \
magnesium \
mv88f6281gtw_ge \
mx1ads \
- netstar \
nhk8815 \
nhk8815_onenand \
omap1510inn \
diff --git a/Makefile b/Makefile
index 6cafb99..699a752 100644
--- a/Makefile
+++ b/Makefile
@@ -932,7 +932,6 @@ clean:
$(obj)tools/ncb $(obj)tools/ubsha1
@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \
$(obj)board/matrix_vision/*/bootscript.img \
- $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \
$(obj)board/voiceblue/eeprom \
$(obj)u-boot.lds \
$(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] \
diff --git a/board/netstar/Makefile b/board/netstar/Makefile
deleted file mode 100644
index 7230a2f..0000000
--- a/board/netstar/Makefile
+++ /dev/null
@@ -1,95 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# (C) Copyright 2005
-# Ladislav Michl, 2N Telekomunikace, michl at 2n.cz
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := netstar.o
-SOBJS := setup.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-LOAD_ADDR = 0x10400000
-
-#########################################################################
-
-all: $(obj).depend $(LIB) $(obj)eeprom.srec $(obj)eeprom.bin \
- $(obj)crcek.srec $(obj)crcek.bin $(obj)crcit
-
-$(LIB): $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $^)
-
-$(obj)eeprom_start.o:
- echo "b eeprom" | $(CC) $(AFLAGS) -c -x assembler -o $@ -
-
-$(obj)eeprom: $(obj)eeprom_start.o $(obj)eeprom.o
- $(LD) -Ttext $(LOAD_ADDR) -e eeprom -o $@ $^ \
- -L$(obj)../../examples/standalone -lstubs \
- $(PLATFORM_LIBS)
-
-$(obj)eeprom.srec: $(obj)eeprom
- $(OBJCOPY) -S -O srec $(<:.o=) $@
-
-$(obj)eeprom.bin: $(obj)eeprom
- $(OBJCOPY) -S -O binary $< $@
-
-$(obj)crcek.srec: $(obj)crcek.o
- $(LD) -g -Ttext 0x00000000 -e crcek -o $(<:.o=) $^
- $(OBJCOPY) -S -O srec $(<:.o=) $@
-
-$(obj)crcek.bin: $(obj)crcek.srec
- $(OBJCOPY) -I srec -O binary $< $@
-
-$(obj)crcit: $(obj)crcit.o $(obj)crc32.o
- $(HOSTCC) $(HOSTCFLAGS) -o $@ $^
-
-$(obj)crcit.o: crcit.c
- $(HOSTCC) $(HOSTCFLAGS) -o $@ -c $<
-
-$(obj)crc32.o: $(SRCTREE)/lib/crc32.c
- $(HOSTCC) $(HOSTCFLAGS) -DUSE_HOSTCC -I$(TOPDIR)/include \
- -o $@ -c $<
-
-clean:
- rm -f $(SOBJS) $(OBJS) \
- $(obj)eeprom_start.o $(obj)eeprom.o \
- $(obj)eeprom $(obj)eeprom.srec $(obj)eeprom.bin \
- $(obj)crcek.o $(obj)crcek $(obj)crcek.srec $(obj)crcek.bin
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/netstar/config.mk b/board/netstar/config.mk
deleted file mode 100644
index 9e1446e..0000000
--- a/board/netstar/config.mk
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Linux-Kernel is expected to be at 1000'8000,
-# entry 1000'8000 (mem base + reserved)
-#
-# We load ourself to internal RAM at 2001'2000
-# Check map file when changing CONFIG_SYS_TEXT_BASE.
-# Everything has fit into 192kB internal SRAM!
-#
-
-# XXX CONFIG_SYS_TEXT_BASE = 0x20012000
-CONFIG_SYS_TEXT_BASE = 0x13FC0000
diff --git a/board/netstar/crcek.S b/board/netstar/crcek.S
deleted file mode 100644
index af35662..0000000
--- a/board/netstar/crcek.S
+++ /dev/null
@@ -1,241 +0,0 @@
-/**
- * (C) Copyright 2005
- * 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2.
- *
- * Image layout looks like following:
- * u32 - size
- * u32 - version
- * ... - data
- * u32 - crc32
- */
-
-#include <config.h>
-#include "crcek.h"
-
-/**
- * do_crc32 - calculate CRC32 of given buffer
- * r0 - crc
- * r1 - pointer to buffer
- * r2 - buffer len
- */
- .macro do_crc32
- ldr r5, FFFFFFFF
- eor r0, r0, r5
- adr r3, CRC32_TABLE
-1:
- ldrb r4, [r1], #1
- eor r4, r4, r0
- and r4, r4, #0xff
- ldr r4, [r3, r4, lsl#2]
- eor r0, r4, r0, lsr#8
- subs r2, r2, #0x1
- bne 1b
- eor r0, r0, r5
- .endm
-
- .macro crcuj, offset, size
- mov r0, #0
- ldr r1, \offset
- ldr r2, [r1], #4
- cmp r2, r0 @ no data, no problem
- beq 2f
- tst r2, #3 @ unaligned size
- bne 2f
- ldr r3, \size
- cmp r2, r3 @ bogus size
- bhi 2f
- do_crc32
- ldr r1, [r1]
-2:
- cmp r0, r1
- .endm
-
- .macro wait, reg
- mov \reg, #0x100000
-3:
- subs \reg, \reg, #0x1
- bne 3b
- .endm
-
-.text
-.globl crcek
-crcek:
- /* Enable I-cache */
- mrc p15, 0, r1, c0, c0, 0 @ read C15 ID register
- mrc p15, 0, r1, c0, c0, 1 @ read C15 Cache information register
- mrc p15, 0, r1, c1, c0, 0 @ read C15 Control register
- orr r1, r1, #0x1000 @ enable I-cache, map interrupt vector 0xffff0000
- mcr p15, 0, r1, c1, c0, 0 @ write C15 Control register
- mov r1, #0x00
- mcr p15, 0, r1, c7, c5, 0 @ Flush I-cache
- nop
- nop
- nop
- nop
-
- /* Setup clocking mode */
- ldr r0, MPU_CLKM_BASE @ base of CLOCK unit
- ldrh r1, [r0, #0x18] @ ARM_SYST - get reset status
- bic r1, r1, #(7 << 11) @ clear clock select
- orr r1, r1, #(2 << 11) @ set synchronous scalable
- mov r2, #0
-loop:
- cmp r2, #1 @ this loop will wait for at least 100 cycles
- streqh r1, [r0, #0x18] @ before issuing next request from MPU
- add r2, r2, #1 @ on the 1st run code is loaded into I-cache
- cmp r2, #16 @ and second run will set clocking mode
- bne loop
- nop
-
- /* Setup clock dividers */
- ldr r1, CKCTL_VAL
- orr r1, r1, #0x2000 @ enable DSP clock
- strh r1, [r0] @ setup clock divisors
-
- /* Setup DPLL to generate requested freq */
- ldr r0, DPLL1_BASE @ base of DPLL1 register
- mov r1, #0x0010 @ set PLL_ENABLE
- orr r1, r1, #0x2000 @ set IOB to new locking
- orr r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF
- orr r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF
- strh r1, [r0] @ write
-
-locking:
- ldrh r1, [r0] @ get DPLL value
- tst r1, #0x01
- beq locking @ while LOCK not set
-
- /* Enable clock */
- ldr r0, MPU_CLKM_BASE @ base of CLOCK unit
- mov r1, #(1 << 10) @ disable idle mode do not check
- @ nWAKEUP pin, other remain active
- strh r1, [r0, #0x04]
- ldr r1, EN_CLK_VAL
- strh r1, [r0, #0x08]
- mov r1, #0x003f @ FLASH.RP not enabled in idle and
- strh r1, [r0, #0x0c] @ max delayed ( 32 x CLKIN )
-
-
- mov r6, #0
- crcuj _LOADER1_OFFSET, _LOADER_SIZE
- bne crc1_bad
- orr r6, r6, #1
-crc1_bad:
- crcuj _LOADER2_OFFSET, _LOADER_SIZE
- bne crc2_bad
- orr r6, r6, #2
-crc2_bad:
- ldr r3, _LOADER1_OFFSET
- ldr r4, _LOADER2_OFFSET
- teq r6, #3
- bne one_is_bad @ one of them (or both) has bad crc
- ldr r1, [r3, #4]
- ldr r2, [r4, #4]
- cmp r1, r2 @ boot 2nd loader if versions differ
- beq boot_1st
- b boot_2nd
-one_is_bad:
- tst r6, #1
- bne boot_1st
- tst r6, #2
- bne boot_2nd
-@ We are doomed, so let user know.
-hell:
- ldr r0, GPIO_BASE @ configure GPIO pins
- ldr r1, GPIO_DIRECTION
- strh r1, [r0, #0x08]
-blink_loop:
- mov r1, #0x08
- strh r1, [r0, #0x04]
- wait r3
- mov r1, #0x10
- strh r1, [r0, #0x04]
- wait r3
- b blink_loop
-boot_1st:
- add pc, r3, #8
-boot_2nd:
- add pc, r4, #8
-
-_LOADER_SIZE:
- .word LOADER_SIZE - 8 @ minus size and crc32
-_LOADER1_OFFSET:
- .word LOADER1_OFFSET
-_LOADER2_OFFSET:
- .word LOADER2_OFFSET
-
-FFFFFFFF:
- .word 0xffffffff
-CRC32_TABLE:
- .word 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419
- .word 0x706af48f, 0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4
- .word 0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07
- .word 0x90bf1d91, 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de
- .word 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, 0x136c9856
- .word 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9
- .word 0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4
- .word 0xa2677172, 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b
- .word 0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3
- .word 0x45df5c75, 0xdcd60dcf, 0xabd13d59, 0x26d930ac, 0x51de003a
- .word 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, 0xcfba9599
- .word 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924
- .word 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190
- .word 0x01db7106, 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f
- .word 0x9fbfe4a5, 0xe8b8d433, 0x7807c9a2, 0x0f00f934, 0x9609a88e
- .word 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01
- .word 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, 0x6c0695ed
- .word 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950
- .word 0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3
- .word 0xfbd44c65, 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2
- .word 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a
- .word 0x346ed9fc, 0xad678846, 0xda60b8d0, 0x44042d73, 0x33031de5
- .word 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa, 0xbe0b1010
- .word 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f
- .word 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17
- .word 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6
- .word 0x03b6e20c, 0x74b1d29a, 0xead54739, 0x9dd277af, 0x04db2615
- .word 0x73dc1683, 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8
- .word 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, 0xf00f9344
- .word 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb
- .word 0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a
- .word 0x67dd4acc, 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5
- .word 0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1
- .word 0xa6bc5767, 0x3fb506dd, 0x48b2364b, 0xd80d2bda, 0xaf0a1b4c
- .word 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, 0x316e8eef
- .word 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236
- .word 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe
- .word 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31
- .word 0x2cd99e8b, 0x5bdeae1d, 0x9b64c2b0, 0xec63f226, 0x756aa39c
- .word 0x026d930a, 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713
- .word 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, 0x92d28e9b
- .word 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242
- .word 0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1
- .word 0x18b74777, 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c
- .word 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45, 0xa00ae278
- .word 0xd70dd2ee, 0x4e048354, 0x3903b3c2, 0xa7672661, 0xd06016f7
- .word 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc, 0x40df0b66
- .word 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9
- .word 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605
- .word 0xcdd70693, 0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8
- .word 0x5d681b02, 0x2a6f2b94, 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b
- .word 0x2d02ef8d
-
-GPIO_BASE:
- .word 0xfffce000
-MPU_CLKM_BASE:
- .word 0xfffece00
-DPLL1_BASE:
- .word 0xfffecf00
-
-CKCTL_VAL:
- .word OMAP5910_ARM_CKCTL
-EN_CLK_VAL:
- .word OMAP5910_ARM_EN_CLK
-GPIO_DIRECTION:
- .word 0x0000ffe7
-
-.end
diff --git a/board/netstar/crcek.h b/board/netstar/crcek.h
deleted file mode 100644
index 30c0860..0000000
--- a/board/netstar/crcek.h
+++ /dev/null
@@ -1,3 +0,0 @@
-#define LOADER_SIZE (448 * 1024)
-#define LOADER1_OFFSET (128 * 1024)
-#define LOADER2_OFFSET (LOADER1_OFFSET + LOADER_SIZE)
diff --git a/board/netstar/crcit.c b/board/netstar/crcit.c
deleted file mode 100644
index a162649..0000000
--- a/board/netstar/crcit.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * (C) Copyright 2005
- * 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stdint.h>
-#include <fcntl.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "crcek.h"
-
-extern uint32_t crc32(uint32_t, const unsigned char *, uint);
-
-static uint32_t data[LOADER_SIZE/4 + 3];
-
-static int do_crc(char *path, unsigned version)
-{
- uint32_t *p;
- ssize_t size;
- int fd;
-
- fd = open(path, O_RDONLY);
- if (fd == -1) {
- perror("Error opening file");
- return EXIT_FAILURE;
- }
- p = data + 2;
- size = read(fd, p, LOADER_SIZE + 4);
- if (size == -1) {
- perror("Error reading file");
- return EXIT_FAILURE;
- }
- if (size > LOADER_SIZE) {
- fprintf(stderr, "File too large\n");
- return EXIT_FAILURE;
- }
- size = (size + 3) & ~3; /* round up to 4 bytes */
- size += 4; /* add size of version field */
- data[0] = size;
- data[1] = version;
- data[size/4 + 1] = crc32(0, (unsigned char *)(data + 1), size);
- close(fd);
-
- if (write(STDOUT_FILENO, data, size + 4 /*size*/ + 4 /*crc*/) == -1) {
- perror("Error writing file");
- return EXIT_FAILURE;
- }
-
- return EXIT_SUCCESS;
-}
-
-int main(int argc, char * const *argv)
-{
- if (argc == 2) {
- return do_crc(argv[1], 0);
- } else if ((argc == 4) && (strcmp(argv[1], "-v") == 0)) {
- char *endptr, *nptr = argv[2];
- unsigned ver = strtoul(nptr, &endptr, 0);
- if (*nptr != '\0' && *endptr == '\0')
- return do_crc(argv[3], ver);
- }
- fprintf(stderr, "Usage: crcit [-v version] <image>\n");
-
- return EXIT_FAILURE;
-}
diff --git a/board/netstar/eeprom.c b/board/netstar/eeprom.c
deleted file mode 100644
index aa375a4..0000000
--- a/board/netstar/eeprom.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * (C) Copyright 2005
- * Ladislav Michl, 2N Telekomunikace, michl at 2n.cz
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Some code shamelessly stolen back from Robin Getz.
- */
-
-#include <common.h>
-#include <exports.h>
-#include <timestamp.h>
-#include <net.h>
-#include "../drivers/net/smc91111.h"
-
-static struct eth_device dev = {
- .iobase = CONFIG_SMC91111_BASE
-};
-
-static u16 read_eeprom_reg(u16 reg)
-{
- int timeout;
-
- SMC_SELECT_BANK(&dev, 2);
- SMC_outw(&dev, reg, PTR_REG);
-
- SMC_SELECT_BANK(&dev, 1);
- SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT |
- CTL_RELOAD, CTL_REG);
-
- timeout = 100;
-
- while ((SMC_inw(&dev, CTL_REG) & CTL_RELOAD) && --timeout)
- udelay(100);
- if (timeout == 0) {
- printf("Timeout reading register %02x\n", reg);
- return 0;
- }
-
- return SMC_inw(&dev, GP_REG);
-}
-
-static int write_eeprom_reg(u16 value, u16 reg)
-{
- int timeout;
-
- SMC_SELECT_BANK(&dev, 2);
- SMC_outw(&dev, reg, PTR_REG);
-
- SMC_SELECT_BANK(&dev, 1);
-
- SMC_outw(&dev, value, GP_REG);
- SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT |
- CTL_STORE, CTL_REG);
-
- timeout = 100;
-
- while ((SMC_inw(&dev, CTL_REG) & CTL_STORE) && --timeout)
- udelay(100);
- if (timeout == 0) {
- printf("Timeout writing register %02x\n", reg);
- return 0;
- }
-
- return 1;
-}
-
-static int write_data(u16 *buf, int len)
-{
- u16 reg = 0x23;
-
- while (len--)
- write_eeprom_reg(*buf++, reg++);
-
- return 0;
-}
-
-static int verify_macaddr(char *s)
-{
- u16 reg;
- int i, err = 0;
-
- puts("HWaddr: ");
- for (i = 0; i < 3; i++) {
- reg = read_eeprom_reg(0x20 + i);
- printf("%02x:%02x%c", reg & 0xff, reg >> 8, i != 2 ? ':' : '\n');
- if (s)
- err |= reg != ((u16 *)s)[i];
- }
-
- return err ? 0 : 1;
-}
-
-static int set_mac(char *s)
-{
- int i;
- char *e, eaddr[6];
-
- /* turn string into mac value */
- for (i = 0; i < 6; i++) {
- eaddr[i] = simple_strtoul(s, &e, 16);
- s = (*e) ? e+1 : e;
- }
-
- for (i = 0; i < 3; i++)
- write_eeprom_reg(*(((u16 *)eaddr) + i), 0x20 + i);
-
- return 0;
-}
-
-static int parse_element(char *s, unsigned char *buf, int len)
-{
- int cnt;
- char *p, num[3];
- unsigned char id;
-
- id = simple_strtoul(s, &p, 16);
- if (*p++ != ':')
- return -1;
- cnt = 2;
- num[2] = 0;
- for (; *p; p += 2) {
- if (p[1] == 0)
- return -2;
- if (cnt + 3 > len)
- return -3;
- num[0] = p[0];
- num[1] = p[1];
- buf[cnt++] = simple_strtoul(num, NULL, 16);
- }
- buf[0] = id;
- buf[1] = cnt - 2;
-
- return cnt;
-}
-
-int eeprom(int argc, char * const argv[])
-{
- int i, len, ret;
- unsigned char buf[58], *p;
-
- app_startup(argv);
- i = get_version();
- if (i != XF_VERSION) {
- printf("Using ABI version %d, but U-Boot provides %d\n",
- XF_VERSION, i);
- return 1;
- }
-
- if ((SMC_inw(&dev, BANK_SELECT) & 0xFF00) != 0x3300) {
- puts("SMSC91111 not found\n");
- return 2;
- }
-
- /* Called without parameters - print MAC address */
- if (argc < 2) {
- verify_macaddr(NULL);
- return 0;
- }
-
- /* Print help message */
- if (argv[1][1] == 'h') {
- puts("NetStar EEPROM writer\n"
- "Built: " U_BOOT_DATE "@" U_BOOT_TIME "\n"
- "Usage:\n\t<mac_address> [<element_1>] [<...>]\n");
- return 0;
- }
-
- /* Try to parse information elements */
- len = sizeof(buf);
- p = buf;
- for (i = 2; i < argc; i++) {
- ret = parse_element(argv[i], p, len);
- switch (ret) {
- case -1:
- printf("Element %d: malformed\n", i - 1);
- return 3;
- case -2:
- printf("Element %d: odd character count\n", i - 1);
- return 3;
- case -3:
- puts("Out of EEPROM memory\n");
- return 3;
- default:
- p += ret;
- len -= ret;
- }
- }
-
- /* First argument (MAC) is mandatory */
- set_mac(argv[1]);
- if (verify_macaddr(argv[1])) {
- puts("*** HWaddr does not match! ***\n");
- return 4;
- }
-
- while (len--)
- *p++ = 0;
-
- write_data((u16 *)buf, sizeof(buf) >> 1);
-
- return 0;
-}
diff --git a/board/netstar/netstar.c b/board/netstar/netstar.c
deleted file mode 100644
index df1704b..0000000
--- a/board/netstar/netstar.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <i2c.h>
-#include <flash.h>
-#include <nand.h>
-
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
- /* arch number of NetStar board */
- gd->bd->bi_arch_number = MACH_TYPE_NETSTAR;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x10000100;
-
- return 0;
-}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- /* Take the Ethernet controller out of reset and wait
- * for the EEPROM load to complete. */
- *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) |= 0x80;
- udelay(10); /* doesn't work before timer_init call */
- *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) &= ~0x80;
- udelay(500);
-
- return 0;
-}
-
-int misc_init_r(void)
-{
-#if defined(CONFIG_RTC_DS1307)
- /* enable trickle charge */
- i2c_reg_write(CONFIG_SYS_I2C_RTC_ADDR, 0x10, 0xaa);
-#endif
- return 0;
-}
-
-int board_late_init(void)
-{
- return 0;
-}
-
-#if defined(CONFIG_CMD_FLASH)
-ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t * info)
-{
- if (banknum == 0) { /* AM29LV800 boot flash */
- info->portwidth = FLASH_CFI_16BIT;
- info->chipwidth = FLASH_CFI_BY16;
- info->interface = FLASH_CFI_X16;
- return 1;
- }
-
- return 0;
-}
-#endif
-
-#if defined(CONFIG_CMD_NAND)
-/*
- * hardware specific access to control-lines
- *
- * NAND_NCE: bit 0 - don't care
- * NAND_CLE: bit 1 -> bit 1 (0x0002)
- * NAND_ALE: bit 2 -> bit 2 (0x0004)
- */
-static void netstar_nand_hwcontrol(struct mtd_info *mtd, int cmd,
- unsigned int ctrl)
-{
- struct nand_chip *chip = mtd->priv;
- unsigned long mask;
-
- if (cmd == NAND_CMD_NONE)
- return;
-
- mask = (ctrl & NAND_CLE) ? 0x02 : 0;
- if (ctrl & NAND_ALE)
- mask |= 0x04;
- writeb(cmd, (unsigned long)chip->IO_ADDR_W | mask);
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
- nand->options = NAND_SAMSUNG_LP_OPTIONS;
- nand->ecc.mode = NAND_ECC_SOFT;
- nand->cmd_ctrl = netstar_nand_hwcontrol;
- nand->chip_delay = 400;
- return 0;
-}
-#endif
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC91111
- rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/netstar/setup.S b/board/netstar/setup.S
deleted file mode 100644
index 72e1811..0000000
--- a/board/netstar/setup.S
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2004 Ales Jindra <jindra@2n.cz>
- * (C) Copyright 2005 Ladislav Michl <michl@2n.cz>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE /* SDRAM load addr from config.mk */
-
-OMAP5910_LPG1_BASE: .word 0xfffbd000
-OMAP5910_TIPB_SWITCHES_BASE: .word 0xfffbc800
-OMAP5910_MPU_TC_BASE: .word 0xfffecc00
-OMAP5910_MPU_CLKM_BASE: .word 0xfffece00
-OMAP5910_ULPD_PWR_MNG_BASE: .word 0xfffe0800
-OMAP5910_DPLL1_BASE: .word 0xfffecf00
-OMAP5910_GPIO_BASE: .word 0xfffce000
-OMAP5910_MPU_WD_TIMER_BASE: .word 0xfffec800
-OMAP5910_MPUI_BASE: .word 0xfffec900
-
-_OMAP5910_ARM_CKCTL: .word OMAP5910_ARM_CKCTL
-_OMAP5910_ARM_EN_CLK: .word OMAP5910_ARM_EN_CLK
-
-OMAP5910_MPUI_CTRL: .word 0x0000ff1b
-
-VAL_EMIFS_CS0_CONFIG: .word 0x00009090
-VAL_EMIFS_CS1_CONFIG: .word 0x00003031
-VAL_EMIFS_CS2_CONFIG: .word 0x0000a0a1
-VAL_EMIFS_CS3_CONFIG: .word 0x0000c0c0
-VAL_EMIFS_DYN_WAIT: .word 0x00000000
-/* autorefresh counter 0x246 ((64000000/13.4)-400)/8192) */
- /* SLRF SD_RET ARE SDRAM_TYPE ARCV SDRAM_FREQUENCY PWD CLK */
-
-#if (PHYS_SDRAM_1_SIZE == SZ_32M)
-VAL_EMIFF_SDRAM_CONFIG: .word ((0 << 0) | (0 << 1) | (3 << 2) | (0xf << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27))
-#else
-VAL_EMIFF_SDRAM_CONFIG: .word ((0 << 0) | (0 << 1) | (3 << 2) | (0xd << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27))
-#endif
-
-VAL_EMIFF_SDRAM_CONFIG2: .word 0x00000003
-VAL_EMIFF_MRS: .word 0x00000037
-
-/*
- * GPIO04 - Green LED (Red LED is connected to LED Pulse Generator)
- * GPIO07 - LAN91C111 reset
- */
-GPIO_DIRECTION:
- .word 0x0000ff6f
-/*
- * Disable everything (green LED is connected via invertor)
- */
-GPIO_OUTPUT:
- .word 0x00000010
-
-MUX_CONFIG_BASE:
- .word 0xfffe1000
-
-MUX_CONFIG_VALUES:
- .align 4
- .word 0x00000000 @ FUNC_MUX_CTRL_0
- .word 0x00000000 @ FUNC_MUX_CTRL_1
- .word 0x00000000 @ FUNC_MUX_CTRL_2
- .word 0x00000000 @ FUNC_MUX_CTRL_3
- .word 0x00000000 @ FUNC_MUX_CTRL_4
- .word 0x02080480 @ FUNC_MUX_CTRL_5
- .word 0x0100001c @ FUNC_MUX_CTRL_6
- .word 0x0004800b @ FUNC_MUX_CTRL_7
- .word 0x10001200 @ FUNC_MUX_CTRL_8
- .word 0x01201012 @ FUNC_MUX_CTRL_9
- .word 0x02082248 @ FUNC_MUX_CTRL_A
- .word 0x00000248 @ FUNC_MUX_CTRL_B
- .word 0x12240000 @ FUNC_MUX_CTRL_C
- .word 0x00002000 @ FUNC_MUX_CTRL_D
- .word 0x00000000 @ PULL_DWN_CTRL_0
- .word 0x00000800 @ PULL_DWN_CTRL_1
- .word 0x01801000 @ PULL_DWN_CTRL_2
- .word 0x00000000 @ PULL_DWN_CTRL_3
- .word 0x00000000 @ GATE_INH_CTRL_0
- .word 0x00000000 @ VOLTAGE_CTRL_0
- .word 0x00000000 @ TEST_DBG_CTRL_0
- .word 0x00000006 @ MOD_CONF_CTRL_0
- .word 0x0000eaef @ COMP_MODE_CTRL_0
-
-MUX_CONFIG_OFFSETS:
- .align 1
- .byte 0x00 @ FUNC_MUX_CTRL_0
- .byte 0x04 @ FUNC_MUX_CTRL_1
- .byte 0x08 @ FUNC_MUX_CTRL_2
- .byte 0x10 @ FUNC_MUX_CTRL_3
- .byte 0x14 @ FUNC_MUX_CTRL_4
- .byte 0x18 @ FUNC_MUX_CTRL_5
- .byte 0x1c @ FUNC_MUX_CTRL_6
- .byte 0x20 @ FUNC_MUX_CTRL_7
- .byte 0x24 @ FUNC_MUX_CTRL_8
- .byte 0x28 @ FUNC_MUX_CTRL_9
- .byte 0x2c @ FUNC_MUX_CTRL_A
- .byte 0x30 @ FUNC_MUX_CTRL_B
- .byte 0x34 @ FUNC_MUX_CTRL_C
- .byte 0x38 @ FUNC_MUX_CTRL_D
- .byte 0x40 @ PULL_DWN_CTRL_0
- .byte 0x44 @ PULL_DWN_CTRL_1
- .byte 0x48 @ PULL_DWN_CTRL_2
- .byte 0x4c @ PULL_DWN_CTRL_3
- .byte 0x50 @ GATE_INH_CTRL_0
- .byte 0x60 @ VOLTAGE_CTRL_0
- .byte 0x70 @ TEST_DBG_CTRL_0
- .byte 0x80 @ MOD_CONF_CTRL_0
- .byte 0x0c @ COMP_MODE_CTRL_0
- .byte 0xff
-
-.globl lowlevel_init
-lowlevel_init:
- /* Improve performance a bit... */
- mrc p15, 0, r1, c0, c0, 0 @ read C15 ID register
- mrc p15, 0, r1, c0, c0, 1 @ read C15 Cache information register
- mrc p15, 0, r1, c1, c0, 0 @ read C15 Control register
- orr r1, r1, #0x1000 @ enable I-cache, map interrupt vector 0xffff0000
- mcr p15, 0, r1, c1, c0, 0 @ write C15 Control register
- mov r1, #0x00
- mcr p15, 0, r1, c7, c5, 0 @ Flush I-cache
- nop
- nop
- nop
- nop
-
- /* Setup clocking mode */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit
- ldrh r1, [r0, #0x18] @ ARM_SYST - get reset status
- bic r1, r1, #(7 << 11) @ clear clock select
- orr r1, r1, #(2 << 11) @ set synchronous scalable
- mov r2, #0
-loop:
- cmp r2, #1 @ this loop will wait for@least 100 cycles
- streqh r1, [r0, #0x18] @ before issuing next request from MPU
- add r2, r2, #1 @ on the 1st run code is loaded into I-cache
- cmp r2, #16 @ and second run will set clocking mode
- bne loop
- nop
-
- /* Setup clock dividers */
- ldr r1, _OMAP5910_ARM_CKCTL
- orr r1, r1, #0x2000 @ enable DSP clock
- strh r1, [r0] @ setup clock divisors
-
- /* Setup DPLL to generate requested freq */
- ldr r0, OMAP5910_DPLL1_BASE @ base of DPLL1 register
- mov r1, #0x0010 @ set PLL_ENABLE
- orr r1, r1, #0x2000 @ set IOB to new locking
- orr r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF
- orr r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF
- strh r1, [r0] @ write
-
-locking:
- ldrh r1, [r0] @ get DPLL value
- tst r1, #0x01
- beq locking @ while LOCK not set
-
- /* Enable clock */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit
- mov r1, #(1 << 10) @ disable idle mode do not check
- @ nWAKEUP pin, other remain active
- strh r1, [r0, #0x04]
- ldr r1, _OMAP5910_ARM_EN_CLK
- strh r1, [r0, #0x08]
- mov r1, #0x003f @ FLASH.RP not enabled in idle and
- strh r1, [r0, #0x0c] @ max delayed ( 32 x CLKIN )
-
- /* Configure 5910 pins functions to match our board. */
- ldr r0, MUX_CONFIG_BASE
- adr r1, MUX_CONFIG_VALUES
- adr r2, MUX_CONFIG_OFFSETS
-next_mux_cfg:
- ldrb r3, [r2], #1
- ldr r4, [r1], #4
- cmp r3, #0xff
- strne r4, [r0, r3]
- bne next_mux_cfg
-
- /* Configure GPIO pins (also disables Green LED) */
- ldr r0, OMAP5910_GPIO_BASE
- ldr r1, GPIO_OUTPUT
- strh r1, [r0, #0x04]
- ldr r1, GPIO_DIRECTION
- strh r1, [r0, #0x08]
-
- /* EnablePeripherals */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ CLOCK unit
- mov r1, #0x0001 @ Peripheral enable
- strh r1, [r0, #0x14]
-
- /* Program LED Pulse Generator */
- ldr r0, OMAP5910_LPG1_BASE @ 1st LED Pulse Generator
- mov r1, #0x7F @ Set obscure frequency in
- strb r1, [r0, #0x00] @ LCR
- mov r1, #0x01 @ Enable clock (CLK_EN) in
- strb r1, [r0, #0x04] @ PMR
-
- /* TIPB Lock UART1 */
- ldr r0, OMAP5910_TIPB_SWITCHES_BASE @ prepare base of TIPB switches
- mov r1, #1 @ ARM allocated
- strh r1, [r0,#0x04] @ clear IRQ line and status bits
- strh r1, [r0,#0x00]
- ldrh r1, [r0,#0x04]
-
- /* Disable watchdog */
- ldr r0, OMAP5910_MPU_WD_TIMER_BASE
- mov r1, #0xf5
- strh r1, [r0, #0x8]
- mov r1, #0xa0
- strh r1, [r0, #0x8]
-
- /* Enable MCLK */
- ldr r0, OMAP5910_ULPD_PWR_MNG_BASE
- mov r1, #0x6
- strh r1, [r0, #0x34]
- strh r1, [r0, #0x34]
-
- /* Setup clock divisors */
- ldr r0, OMAP5910_ULPD_PWR_MNG_BASE @ base of ULDPL DPLL1 register
-
- mov r1, #0x0010 @ set PLL_ENABLE
- orr r1, r1, #0x2000 @ set IOB to new locking
- strh r1, [r0] @ write
-
-ulocking:
- ldrh r1, [r0] @ get DPLL value
- tst r1, #1
- beq ulocking @ while LOCK not set
-
- /* EMIF init */
- ldr r0, OMAP5910_MPU_TC_BASE
- ldrh r1, [r0, #0x0c] @ EMIFS_CONFIG_REG
- bic r1, r1, #0x0c @ pwr down disabled, flash WP
- orr r1, r1, #0x01
- str r1, [r0, #0x0c]
-
- ldr r1, VAL_EMIFS_CS0_CONFIG
- str r1, [r0, #0x10] @ EMIFS_CS0_CONFIG
- ldr r1, VAL_EMIFS_CS1_CONFIG
- str r1, [r0, #0x14] @ EMIFS_CS1_CONFIG
- ldr r1, VAL_EMIFS_CS2_CONFIG
- str r1, [r0, #0x18] @ EMIFS_CS2_CONFIG
- ldr r1, VAL_EMIFS_CS3_CONFIG
- str r1, [r0, #0x1c] @ EMIFS_CS3_CONFIG
- ldr r1, VAL_EMIFS_DYN_WAIT
- str r1, [r0, #0x40] @ EMIFS_CFG_DYN_WAIT
-
- /* Setup SDRAM */
- ldr r1, VAL_EMIFF_SDRAM_CONFIG
- str r1, [r0, #0x20] @ EMIFF_SDRAM_CONFIG
- ldr r1, VAL_EMIFF_SDRAM_CONFIG2
- str r1, [r0, #0x3c] @ EMIFF_SDRAM_CONFIG2
- ldr r1, VAL_EMIFF_MRS
- str r1, [r0, #0x24] @ EMIFF_MRS
- /* SDRAM needs 100us to stabilize */
- mov r0, #0x4000
-sdelay:
- subs r0, r0, #0x1
- bne sdelay
-
- /* back to arch calling code */
- mov pc, lr
-.end
diff --git a/boards.cfg b/boards.cfg
index 39b9199..52d3dd9 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -70,7 +70,6 @@ sbc2410x arm arm920t - -
VCMA9 arm arm920t vcma9 mpl s3c24x0
smdk2400 arm arm920t - samsung s3c24x0
smdk2410 arm arm920t - samsung s3c24x0
-netstar arm arm925t
voiceblue arm arm925t
omap1510inn arm arm925t - ti
integratorap_cm926ejs arm arm926ejs integrator armltd - integratorap
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 85d84d7..b169dbe 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+netstar arm arm925t - 2011-07-17
mx1fs2 arm arm920t - 2011-07-17
lpd7a404 arm lh7a40x - 2011-07-17
edb9301 arm arm920t - 2011-07-17
diff --git a/include/configs/netstar.h b/include/configs/netstar.h
deleted file mode 100644
index f159013..0000000
--- a/include/configs/netstar.h
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
- *
- * Configuation settings for the TI OMAP NetStar board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <configs/omap1510.h>
-
-#define CONFIG_ARM925T 1 /* This is an arm925t CPU */
-#define CONFIG_OMAP 1 /* in a TI OMAP core */
-#define CONFIG_OMAP1510 1 /* which is in a 5910 */
-
-/* Input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz */
-#define CONFIG_XTAL_FREQ 12000000 /* 12MHz */
-
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_MISC_INIT_R /* There is nothing to really init */
-#define BOARD_LATE_INIT /* but we flash the LEDs here */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x10000000
-#define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024)
-#define PHYS_FLASH_1 0x00000000
-
-#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR 0x4000
-#define CONFIG_ENV_SIZE (8 * 1024)
-#define CONFIG_ENV_SECT_SIZE (8 * 1024)
-#define CONFIG_ENV_ADDR_REDUND 0x6000
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
-
-/*
- * The stack size is set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (1 * 1024 * 1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK (CONFIG_XTAL_FREQ)
-#define CONFIG_SYS_NS16550_COM1 OMAP1510_UART1_BASE
-
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE 0x04000300
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 19
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-#define CONFIG_FLASH_CFI_LEGACY
-#define CONFIG_SYS_FLASH_LEGACY_512Kx16
-
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x04000000 + (2 << 23)
-#define NAND_ALLOW_ERASE_ALL 1
-
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP1510_I2C
-
-#define CONFIG_RTC_DS1307
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * Partitions (mtdparts command line support)
- */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=gen_nand.0"
-#define MTDPARTS_DEFAULT "mtdparts=" \
- "physmap-flash.0:8k at 16k(env),8k(r_env),448k@576k(u-boot);" \
- "gen_nand.0:4M(kernel0),40M(rootfs0),4M(kernel1),40M(rootfs1),-(data)"
-
-/*
- * Command line configuration
- */
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-#define CONFIG_LOOPW
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */
-#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
-#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */
-#define CONFIG_BOOTCOMMAND "run fboot"
-#define CONFIG_PREBOOT "run setup"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "autostart=yes\0" \
- "ospart=0\0" \
- "setup=setenv bootargs console=ttyS0,$baudrate $mtdparts\0" \
- "setpart=" \
- "if test -n $swapos; then " \
- "setenv swapos; saveenv; " \
- "if test $ospart -eq 0; then " \
- "setenv ospart 1; " \
- "else " \
- "setenv ospart 0; " \
- "fi; " \
- "fi\0" \
- "nfsargs=setenv bootargs $bootargs " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
- "nfsroot=$rootpath root=/dev/nfs\0" \
- "flashargs=run setpart;setenv bootargs $bootargs " \
- "root=mtd:rootfs$ospart ro " \
- "rootfstype=jffs2\0" \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
- "fboot=run flashargs;nboot kernel$ospart\0" \
- "nboot=bootp;run nfsargs;tftp\0"
-
-#if 0 /* feel free to disable for development */
-#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
-#define CONFIG_AUTOBOOT_PROMPT \
- "\nNetStar PBX - boot in %d secs...\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR "." /* 1st "password" */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT "# "
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_AUTO_COMPLETE
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
-#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \
- (CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE)
-
-#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x400000)
-
-/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
- * This time is further subdivided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE
-#define CONFIG_SYS_PTV 7
-#define CONFIG_SYS_HZ 1000
-
-#define OMAP5910_DPLL_DIV 1
-#define OMAP5910_DPLL_MUL \
- ((CONFIG_SYS_CLK_FREQ * (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)
-
-#define OMAP5910_ARM_PER_DIV 2 /* CKL/4 */
-#define OMAP5910_LCD_DIV 2 /* CKL/4 */
-#define OMAP5910_ARM_DIV 0 /* CKL/1 */
-#define OMAP5910_DSP_DIV 0 /* CKL/1 */
-#define OMAP5910_TC_DIV 1 /* CKL/2 */
-#define OMAP5910_DSP_MMU_DIV 1 /* CKL/2 */
-#define OMAP5910_ARM_TIM_SEL 1 /* CKL used for MPU timers */
-
-#define OMAP5910_ARM_EN_CLK 0x03d6 /* 0000 0011 1101 0110b */
-#define OMAP5910_ARM_CKCTL ((OMAP5910_ARM_PER_DIV) | \
- (OMAP5910_LCD_DIV << 2) | \
- (OMAP5910_ARM_DIV << 4) | \
- (OMAP5910_DSP_DIV << 6) | \
- (OMAP5910_TC_DIV << 8) | \
- (OMAP5910_DSP_MMU_DIV << 10) | \
- (OMAP5910_ARM_TIM_SEL << 12))
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 35+ messages in thread* [U-Boot] [PATCH v2 07/16] ARM: remove broken "sbc2410x" board
2011-08-26 12:25 ` [U-Boot] [PATCH v2 00/16] " Wolfgang Denk
` (5 preceding siblings ...)
2011-08-26 12:25 ` [U-Boot] [PATCH v2 06/16] ARM: remove broken "netstar" board Wolfgang Denk
@ 2011-08-26 12:25 ` Wolfgang Denk
2011-08-26 12:25 ` [U-Boot] [PATCH v2 08/16] ARM: remove broken "smdk2400" board Wolfgang Denk
` (8 subsequent siblings)
15 siblings, 0 replies; 35+ messages in thread
From: Wolfgang Denk @ 2011-08-26 12:25 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
board/sbc2410x/Makefile | 51 -----
board/sbc2410x/config.mk | 23 --
board/sbc2410x/flash.c | 433 ----------------------------------------
board/sbc2410x/lowlevel_init.S | 163 ---------------
board/sbc2410x/sbc2410x.c | 193 ------------------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/sbc2410x.h | 220 --------------------
9 files changed, 1 insertions(+), 1085 deletions(-)
delete mode 100644 board/sbc2410x/Makefile
delete mode 100644 board/sbc2410x/config.mk
delete mode 100644 board/sbc2410x/flash.c
delete mode 100644 board/sbc2410x/lowlevel_init.S
delete mode 100644 board/sbc2410x/sbc2410x.c
delete mode 100644 include/configs/sbc2410x.h
diff --git a/MAKEALL b/MAKEALL
index ce987e8..a485b95 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -338,7 +338,6 @@ LIST_ARM9=" \
openrd_ultimate \
portl2 \
rd6281a \
- sbc2410x \
scb9328 \
sheevaplug \
smdk2400 \
diff --git a/board/sbc2410x/Makefile b/board/sbc2410x/Makefile
deleted file mode 100644
index 2b3b781..0000000
--- a/board/sbc2410x/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := sbc2410x.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/sbc2410x/config.mk b/board/sbc2410x/config.mk
deleted file mode 100644
index bc01a2d..0000000
--- a/board/sbc2410x/config.mk
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# SAMSUNG SMDK2410 board with S3C2410X (ARM920T) cpu
-#
-# see http://www.samsung.com/ for more information on SAMSUNG
-#
-
-#
-# SMDK2410 has 1 bank of 64 MB DRAM
-#
-# 3000'0000 to 3400'0000
-#
-# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
-# optionally with a ramdisk at 3080'0000
-#
-# we load ourself to 33F8'0000
-#
-# download area is 3300'0000
-
-CONFIG_SYS_TEXT_BASE = 0x33F80000
diff --git a/board/sbc2410x/flash.c b/board/sbc2410x/flash.c
deleted file mode 100644
index d209a6f..0000000
--- a/board/sbc2410x/flash.c
+++ /dev/null
@@ -1,433 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-ulong myflush (void);
-
-#define FLASH_BANK_SIZE PHYS_FLASH_SIZE
-#define MAIN_SECT_SIZE 0x10000 /* 64 KB */
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-#define CMD_READ_ARRAY 0x000000F0
-#define CMD_UNLOCK1 0x000000AA
-#define CMD_UNLOCK2 0x00000055
-#define CMD_ERASE_SETUP 0x00000080
-#define CMD_ERASE_CONFIRM 0x00000030
-#define CMD_PROGRAM 0x000000A0
-#define CMD_UNLOCK_BYPASS 0x00000020
-
-#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555 << 1)))
-#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA << 1)))
-
-#define BIT_ERASE_DONE 0x00000080
-#define BIT_RDY_MASK 0x00000080
-#define BIT_PROGRAM_ERROR 0x00000020
-#define BIT_TIMEOUT 0x80000000 /* our flag */
-
-#define READY 1
-#define ERR 2
-#define TMO 4
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init (void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
-
- flash_info[i].flash_id =
-#if defined(CONFIG_AMD_LV400)
- (AMD_MANUFACT & FLASH_VENDMASK) |
- (AMD_ID_LV400B & FLASH_TYPEMASK);
-#elif defined(CONFIG_AMD_LV800)
- (AMD_MANUFACT & FLASH_VENDMASK) |
- (AMD_ID_LV800B & FLASH_TYPEMASK);
-#else
-#error "Unknown flash configured"
-#endif
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- if (i == 0)
- flashbase = PHYS_FLASH_1;
- else
- panic ("configured too many flash banks!\n");
- for (j = 0; j < flash_info[i].sector_count; j++) {
- if (j <= 3) {
- /* 1st one is 16 KB */
- if (j == 0) {
- flash_info[i].start[j] =
- flashbase + 0;
- }
-
- /* 2nd and 3rd are both 8 KB */
- if ((j == 1) || (j == 2)) {
- flash_info[i].start[j] =
- flashbase + 0x4000 + (j -
- 1) *
- 0x2000;
- }
-
- /* 4th 32 KB */
- if (j == 3) {
- flash_info[i].start[j] =
- flashbase + 0x8000;
- }
- } else {
- flash_info[i].start[j] =
- flashbase + (j - 3) * MAIN_SECT_SIZE;
- }
- }
- size += flash_info[i].size;
- }
-
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (AMD_MANUFACT & FLASH_VENDMASK):
- printf ("AMD: ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (AMD_ID_LV400B & FLASH_TYPEMASK):
- printf ("1x Amd29LV400BB (4Mbit)\n");
- break;
- case (AMD_ID_LV800B & FLASH_TYPEMASK):
- printf ("1x Amd29LV800BB (8Mbit)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- goto Done;
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-
- Done:;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- ushort result;
- int iflag, cflag, prot, sect;
- int rc = ERR_OK;
- int chip;
- ulong start;
-
- /* first look for protection bits */
-
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
-
- if ((s_first < 0) || (s_first > s_last)) {
- return ERR_INVAL;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (AMD_MANUFACT & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
- if (prot)
- return ERR_PROTECTED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- cflag = icache_status ();
- icache_disable ();
- iflag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
- printf ("Erasing sector %2d ... ", sect);
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- if (info->protect[sect] == 0) { /* not protected */
- vu_short *addr = (vu_short *) (info->start[sect]);
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- *addr = CMD_ERASE_CONFIRM;
-
- /* wait until flash is ready */
- chip = 0;
-
- do {
- result = *addr;
-
- /* check timeout */
- if (get_timer(start) >
- CONFIG_SYS_FLASH_ERASE_TOUT) {
- MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
- chip = TMO;
- break;
- }
-
- if (!chip
- && (result & 0xFFFF) & BIT_ERASE_DONE)
- chip = READY;
-
- if (!chip
- && (result & 0xFFFF) & BIT_PROGRAM_ERROR)
- chip = ERR;
-
- } while (!chip);
-
- MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-
- if (chip == ERR) {
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- if (chip == TMO) {
- rc = ERR_TIMOUT;
- goto outahere;
- }
-
- printf ("ok.\n");
- } else { /* it was protected */
-
- printf ("protected!\n");
- }
- }
-
- if (ctrlc ())
- printf ("User Interrupt!\n");
-
- outahere:
- /* allow flash to settle - wait 10 ms */
- udelay_masked (10000);
-
- if (iflag)
- enable_interrupts ();
-
- if (cflag)
- icache_enable ();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_hword (flash_info_t * info, ulong dest, ushort data)
-{
- vu_short *addr = (vu_short *) dest;
- ushort result;
- int rc = ERR_OK;
- int cflag, iflag;
- int chip;
- ulong start;
-
- /*
- * Check if Flash is (sufficiently) erased
- */
- result = *addr;
- if ((result & data) != data)
- return ERR_NOT_ERASED;
-
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- cflag = icache_status ();
- icache_disable ();
- iflag = disable_interrupts ();
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS;
- *addr = CMD_PROGRAM;
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- get_timer(start);
-
- /* wait until flash is ready */
- chip = 0;
- do {
- result = *addr;
-
- /* check timeout */
- if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- chip = ERR | TMO;
- break;
- }
- if (!chip && ((result & 0x80) == (data & 0x80)))
- chip = READY;
-
- if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) {
- result = *addr;
-
- if ((result & 0x80) == (data & 0x80))
- chip = READY;
- else
- chip = ERR;
- }
-
- } while (!chip);
-
- *addr = CMD_READ_ARRAY;
-
- if (chip == ERR || *addr != data)
- rc = ERR_PROG_ERROR;
-
- if (iflag)
- enable_interrupts ();
-
- if (cflag)
- icache_enable ();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- int l;
- int i, rc;
- ushort data;
-
- wp = (addr & ~1); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
- for (; i < 2 && cnt > 0; ++i) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- if ((rc = write_hword (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 2;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 2) {
- data = *((vu_short *) src);
- if ((rc = write_hword (info, wp, data)) != 0) {
- return (rc);
- }
- src += 2;
- wp += 2;
- cnt -= 2;
- }
-
- if (cnt == 0) {
- return ERR_OK;
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- }
- for (; i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- return write_hword (info, wp, data);
-}
diff --git a/board/sbc2410x/lowlevel_init.S b/board/sbc2410x/lowlevel_init.S
deleted file mode 100644
index 3de9166..0000000
--- a/board/sbc2410x/lowlevel_init.S
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
- * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
- *
- * Modified for the Samsung SMDK2410 by
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * Modified for the friendly-arm SBC-2410X by
- * (C) Copyright 2005
- * JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-/*
- * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S
- *
- * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar@sec.samsung.com>
- */
-
-#define BWSCON 0x48000000
-
-/* BWSCON */
-#define DW8 (0x0)
-#define DW16 (0x1)
-#define DW32 (0x2)
-#define WAIT (0x1<<2)
-#define UBLB (0x1<<3)
-
-#define B1_BWSCON (DW16)
-#define B2_BWSCON (DW16)
-#define B3_BWSCON (DW16 + WAIT + UBLB)
-#define B4_BWSCON (DW16)
-#define B5_BWSCON (DW16)
-#define B6_BWSCON (DW32)
-#define B7_BWSCON (DW32)
-
-#define B0_Tacs 0x0
-#define B0_Tcos 0x0
-#define B0_Tacc 0x7
-#define B0_Tcoh 0x0
-#define B0_Tah 0x0
-#define B0_Tacp 0x0
-#define B0_PMC 0x0
-
-#define B1_Tacs 0x0
-#define B1_Tcos 0x0
-#define B1_Tacc 0x7
-#define B1_Tcoh 0x0
-#define B1_Tah 0x0
-#define B1_Tacp 0x0
-#define B1_PMC 0x0
-
-#define B2_Tacs 0x0
-#define B2_Tcos 0x0
-#define B2_Tacc 0x7
-#define B2_Tcoh 0x0
-#define B2_Tah 0x0
-#define B2_Tacp 0x0
-#define B2_PMC 0x0
-
-#define B3_Tacs 0xc
-#define B3_Tcos 0x7
-#define B3_Tacc 0xf
-#define B3_Tcoh 0x1
-#define B3_Tah 0x0
-#define B3_Tacp 0x0
-#define B3_PMC 0x0
-
-#define B4_Tacs 0x0
-#define B4_Tcos 0x0
-#define B4_Tacc 0x7
-#define B4_Tcoh 0x0
-#define B4_Tah 0x0
-#define B4_Tacp 0x0
-#define B4_PMC 0x0
-
-#define B5_Tacs 0xc
-#define B5_Tcos 0x7
-#define B5_Tacc 0xf
-#define B5_Tcoh 0x1
-#define B5_Tah 0x0
-#define B5_Tacp 0x0
-#define B5_PMC 0x0
-
-#define B6_MT 0x3 /* SDRAM */
-#define B6_Trcd 0x1
-#define B6_SCAN 0x1 /* 9bit */
-
-#define B7_MT 0x3 /* SDRAM */
-#define B7_Trcd 0x1 /* 3clk */
-#define B7_SCAN 0x1 /* 9bit */
-
-/* REFRESH parameter */
-#define REFEN 0x1 /* Refresh enable */
-#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
-#define Trp 0x0 /* 2clk */
-#define Trc 0x3 /* 7clk */
-#define Tchr 0x2 /* 3clk */
-#define REFCNT 0x0459
-/**************************************/
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE
-
-.globl lowlevel_init
-lowlevel_init:
- /* memory control configuration */
- /* make r0 relative the current location so that it */
- /* reads SMRDATA out of FLASH rather than memory ! */
- ldr r0, =SMRDATA
- ldr r1, _TEXT_BASE
- sub r0, r0, r1
- ldr r1, =BWSCON /* Bus Width Status Controller */
- add r2, r0, #13*4
-0:
- ldr r3, [r0], #4
- str r3, [r1], #4
- cmp r2, r0
- bne 0b
-
- /* everything is fine now */
- mov pc, lr
-
- .ltorg
-/* the literal pools origin */
-
-SMRDATA:
- .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
- .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
- .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
- .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
- .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
- .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
- .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
- .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
- .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
- .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
- .word 0xb2
- .word 0x30
- .word 0x30
diff --git a/board/sbc2410x/sbc2410x.c b/board/sbc2410x/sbc2410x.c
deleted file mode 100644
index c82382d..0000000
--- a/board/sbc2410x/sbc2410x.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2005
- * JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/s3c24x0_cpu.h>
-
-#if defined(CONFIG_CMD_NAND)
-#include <linux/mtd/nand.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define FCLK_SPEED 1
-
-#if FCLK_SPEED==0 /* Fout = 203MHz, Fin = 12MHz for Audio */
-#define M_MDIV 0xC3
-#define M_PDIV 0x4
-#define M_SDIV 0x1
-#elif FCLK_SPEED==1 /* Fout = 202.8MHz */
-#define M_MDIV 0x5c
-#define M_PDIV 0x4
-#define M_SDIV 0x0
-#endif
-
-#define USB_CLOCK 1
-
-#if USB_CLOCK==0
-#define U_M_MDIV 0xA1
-#define U_M_PDIV 0x3
-#define U_M_SDIV 0x1
-#elif USB_CLOCK==1
-#define U_M_MDIV 0x48
-#define U_M_PDIV 0x3
-#define U_M_SDIV 0x2
-#endif
-
-static inline void delay (unsigned long loops)
-{
- __asm__ volatile ("1:\n"
- "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0" (loops));
-}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- struct s3c24x0_clock_power * const clk_power =
- s3c24x0_get_base_clock_power();
- struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
-
- /* to reduce PLL lock time, adjust the LOCKTIME register */
- clk_power->locktime = 0xFFFFFF;
-
- /* configure MPLL */
- clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
-
- /* some delay between MPLL and UPLL */
- delay (4000);
-
- /* configure UPLL */
- clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
-
- /* some delay between MPLL and UPLL */
- delay (8000);
-
- /* set up the I/O ports */
- gpio->gpacon = 0x007FFFFF;
- gpio->gpbcon = 0x00044556;
- gpio->gpbup = 0x000007FF;
- gpio->gpccon = 0xAAAAAAAA;
- gpio->gpcup = 0x0000FFFF;
- gpio->gpdcon = 0xAAAAAAAA;
- gpio->gpdup = 0x0000FFFF;
- gpio->gpecon = 0xAAAAAAAA;
- gpio->gpeup = 0x0000FFFF;
- gpio->gpfcon = 0x000055AA;
- gpio->gpfup = 0x000000FF;
- gpio->gpgcon = 0xFF95FF3A;
- gpio->gpgup = 0x0000FFFF;
- gpio->gphcon = 0x0016FAAA;
- gpio->gphup = 0x000007FF;
-
- gpio->extint0 = 0x22222222;
- gpio->extint1 = 0x22222222;
- gpio->extint2 = 0x22222222;
-
- /* arch number of SMDK2410-Board */
- gd->bd->bi_arch_number = MACH_TYPE_SMDK2410;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x30000100;
-
- icache_enable();
- dcache_enable();
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
-
-#if defined(CONFIG_CMD_NAND)
-extern ulong nand_probe(ulong physadr);
-
-static inline void NF_Reset(void)
-{
- int i;
-
- NF_SetCE(NFCE_LOW);
- NF_Cmd(0xFF); /* reset command */
- for(i = 0; i < 10; i++); /* tWB = 100ns. */
- NF_WaitRB(); /* wait 200~500us; */
- NF_SetCE(NFCE_HIGH);
-}
-
-static inline void NF_Init(void)
-{
-#if 1
-#define TACLS 0
-#define TWRPH0 3
-#define TWRPH1 0
-#else
-#define TACLS 0
-#define TWRPH0 4
-#define TWRPH1 2
-#endif
-
- NF_Conf((1<<15)|(0<<14)|(0<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0));
- /*nand->NFCONF = (1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0); */
- /* 1 1 1 1, 1 xxx, r xxx, r xxx */
- /* En 512B 4step ECCR nFCE=H tACLS tWRPH0 tWRPH1 */
-
- NF_Reset();
-}
-
-void nand_init(void)
-{
- struct s3c2410_nand * const nand = s3c2410_get_base_nand();
-
- NF_Init();
-#ifdef DEBUG
- printf("NAND flash probing@0x%.8lX\n", (ulong)nand);
-#endif
- printf ("%4lu MB\n", nand_probe((ulong)nand) >> 20);
-}
-#endif
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_CS8900
- rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/boards.cfg b/boards.cfg
index 52d3dd9..8a501ae 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -66,7 +66,6 @@ mx1ads arm arm920t - -
scb9328 arm arm920t - - imx
cm4008 arm arm920t - - ks8695
cm41xx arm arm920t - - ks8695
-sbc2410x arm arm920t - - s3c24x0
VCMA9 arm arm920t vcma9 mpl s3c24x0
smdk2400 arm arm920t - samsung s3c24x0
smdk2410 arm arm920t - samsung s3c24x0
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index b169dbe..0c62885 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+sbc2410x arm arm920t - 2011-07-17
netstar arm arm925t - 2011-07-17
mx1fs2 arm arm920t - 2011-07-17
lpd7a404 arm lh7a40x - 2011-07-17
diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h
deleted file mode 100644
index f0f19b2..0000000
--- a/include/configs/sbc2410x.h
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- * Gary Jennejohn <garyj@denx.de>
- * David Mueller <d.mueller@elsoft.ch>
- *
- * Modified for the friendly-arm SBC-2410X by
- * (C) Copyright 2005
- * JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com>
- *
- * Configuation settings for the friendly-arm SBC-2410X board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * If we are developing, we might want to start armboot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- */
-#undef CONFIG_SKIP_LOWLEVEL_INIT /* undef for developing */
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */
-#define CONFIG_S3C2410 1 /* specifically a SAMSUNG S3C2410 SoC */
-#define CONFIG_SBC2410X 1 /* on a friendly-arm SBC-2410X Board */
-
-/* input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ 12000000/* the SBC2410X has 12MHz input clock */
-
-
-#define USE_920T_MMU 1
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_CS8900 /* we have a CS8900 on-board */
-#define CONFIG_CS8900_BASE 0x19000300
-#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_S3C24X0_SERIAL
-#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SBC2410X */
-
-/************************************************************
- * RTC
- ************************************************************/
-#define CONFIG_RTC_S3C24X0 1
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "console=ttySAC0 root=/dev/nfs " \
- "nfsroot=192.168.0.1:/friendly-arm/rootfs_netserv " \
- "ip=192.168.0.69:192.168.0.1:192.168.0.1:255.255.255.0:debian:eth0:off"
-#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.0.69
-#define CONFIG_SERVERIP 192.168.0.1
-/*#define CONFIG_BOOTFILE "elinos-lart" */
-#define CONFIG_BOOTCOMMAND "dhcp; bootm"
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "[ ~ljh at GDLC ]# " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x30000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x33000000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-/* #define CONFIG_AMD_LV400 1 /\* uncomment this if you have a LV400 flash *\/ */
-
-#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-
-#ifdef CONFIG_AMD_LV800
-#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */
-#define CONFIG_SYS_MAX_FLASH_SECT (19) /* max number of sectors on one chip */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x0F0000) /* addr of environment */
-#endif
-
-#ifdef CONFIG_AMD_LV400
-#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */
-#define CONFIG_SYS_MAX_FLASH_SECT (11) /* max number of sectors on one chip */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x070000) /* addr of environment */
-#endif
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
-
-/*-----------------------------------------------------------------------
- * NAND flash settings
- */
-#if defined(CONFIG_CMD_NAND)
-#define CONFIG_NAND_S3C2410
-#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
-#endif /* CONFIG_CMD_NAND */
-
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_CMDLINE_TAG
-
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-#define CONFIG_CMDLINE_EDITING
-
-#ifdef CONFIG_CMDLINE_EDITING
-#undef CONFIG_AUTO_COMPLETE
-#else
-#define CONFIG_AUTO_COMPLETE
-#endif
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 35+ messages in thread* [U-Boot] [PATCH v2 08/16] ARM: remove broken "smdk2400" board
2011-08-26 12:25 ` [U-Boot] [PATCH v2 00/16] " Wolfgang Denk
` (6 preceding siblings ...)
2011-08-26 12:25 ` [U-Boot] [PATCH v2 07/16] ARM: remove broken "sbc2410x" board Wolfgang Denk
@ 2011-08-26 12:25 ` Wolfgang Denk
2011-08-26 12:25 ` [U-Boot] [PATCH v2 09/16] ARM: remove broken "versatile" boards Wolfgang Denk
` (7 subsequent siblings)
15 siblings, 0 replies; 35+ messages in thread
From: Wolfgang Denk @ 2011-08-26 12:25 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Gary Jennejohn <garyj@denx.de>
---
MAINTAINERS | 4 -
MAKEALL | 1 -
board/samsung/smdk2400/Makefile | 51 ----
board/samsung/smdk2400/config.mk | 25 --
board/samsung/smdk2400/flash.c | 492 --------------------------------
board/samsung/smdk2400/lowlevel_init.S | 163 -----------
board/samsung/smdk2400/smdk2400.c | 125 --------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/smdk2400.h | 189 ------------
10 files changed, 1 insertions(+), 1051 deletions(-)
delete mode 100644 board/samsung/smdk2400/Makefile
delete mode 100644 board/samsung/smdk2400/config.mk
delete mode 100644 board/samsung/smdk2400/flash.c
delete mode 100644 board/samsung/smdk2400/lowlevel_init.S
delete mode 100644 board/samsung/smdk2400/smdk2400.c
delete mode 100644 include/configs/smdk2400.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 03ba243..4927d4b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -682,10 +682,6 @@ Grazvydas Ignotas <notasas@gmail.com>
omap3_pandora ARM ARMV7 (OMAP3xx SoC)
-Gary Jennejohn <garyj@denx.de>
-
- smdk2400 ARM920T
-
Matthias Kaehlcke <matthias@kaehlcke.net>
edb9301 ARM920T (EP9301)
edb9302 ARM920T (EP9302)
diff --git a/MAKEALL b/MAKEALL
index a485b95..73a053d 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -340,7 +340,6 @@ LIST_ARM9=" \
rd6281a \
scb9328 \
sheevaplug \
- smdk2400 \
smdk2410 \
spear300 \
spear310 \
diff --git a/board/samsung/smdk2400/Makefile b/board/samsung/smdk2400/Makefile
deleted file mode 100644
index 0c45d02..0000000
--- a/board/samsung/smdk2400/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := smdk2400.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/samsung/smdk2400/config.mk b/board/samsung/smdk2400/config.mk
deleted file mode 100644
index 4c27dc3..0000000
--- a/board/samsung/smdk2400/config.mk
+++ /dev/null
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-#
-# SAMSUNG board with S3C2400X (ARM920T) CPU
-#
-# see http://www.samsung.com/ for more information on SAMSUNG
-#
-
-#
-# SAMSUNG has 1 bank of 32 MB DRAM
-#
-# 0C00'0000 to 0E00'0000
-#
-# Linux-Kernel is expected to be at 0cf0'0000, entry 0cf0'0000
-# optionally with a ramdisk at 0c80'0000
-#
-# we load ourself to 0CF80000 (must be high enough not to be
-# overwritten by the uncompessing Linux kernel)
-#
-# download area is 0C80'0000
-#
-
-
-CONFIG_SYS_TEXT_BASE = 0x0CF80000
diff --git a/board/samsung/smdk2400/flash.c b/board/samsung/smdk2400/flash.c
deleted file mode 100644
index 47382fe..0000000
--- a/board/samsung/smdk2400/flash.c
+++ /dev/null
@@ -1,492 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* #define DEBUG */
-
-#include <common.h>
-#include <environment.h>
-
-#define FLASH_BANK_SIZE 0x1000000 /* 2 x 8 MB */
-#define MAIN_SECT_SIZE 0x40000 /* 2 x 128 kB */
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-
-#define CMD_READ_ARRAY 0x00FF00FF
-#define CMD_IDENTIFY 0x00900090
-#define CMD_ERASE_SETUP 0x00200020
-#define CMD_ERASE_CONFIRM 0x00D000D0
-#define CMD_PROGRAM 0x00400040
-#define CMD_RESUME 0x00D000D0
-#define CMD_SUSPEND 0x00B000B0
-#define CMD_STATUS_READ 0x00700070
-#define CMD_STATUS_RESET 0x00500050
-
-#define BIT_BUSY 0x00800080
-#define BIT_ERASE_SUSPEND 0x00400040
-#define BIT_ERASE_ERROR 0x00200020
-#define BIT_PROGRAM_ERROR 0x00100010
-#define BIT_VPP_RANGE_ERROR 0x00080008
-#define BIT_PROGRAM_SUSPEND 0x00040004
-#define BIT_PROTECT_ERROR 0x00020002
-#define BIT_UNDEFINED 0x00010001
-
-#define BIT_SEQUENCE_ERROR 0x00300030
-#define BIT_TIMEOUT 0x80000000
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init (void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
-
- flash_info[i].flash_id =
- (INTEL_MANUFACT & FLASH_VENDMASK) |
- (INTEL_ID_28F640J3A & FLASH_TYPEMASK);
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- if (i == 0)
- flashbase = CONFIG_SYS_FLASH_BASE;
- else
- panic ("configured too many flash banks!\n");
- for (j = 0; j < flash_info[i].sector_count; j++) {
- flash_info[i].start[j] = flashbase;
-
- /* uniform sector size */
- flashbase += MAIN_SECT_SIZE;
- }
- size += flash_info[i].size;
- }
-
- /*
- * Protect monitor and environment sectors
- */
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, &flash_info[0]);
-
-#ifdef CONFIG_ENV_ADDR_REDUND
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR_REDUND,
- CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[0]);
-#endif
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (INTEL_MANUFACT & FLASH_VENDMASK):
- printf ("Intel: ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (INTEL_ID_28F640J3A & FLASH_TYPEMASK):
- printf ("2x 28F640J3A (64Mbit)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- goto Done;
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-
-Done: ;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_error (ulong code)
-{
- /* Check bit patterns */
- /* SR.7=0 is busy, SR.7=1 is ready */
- /* all other flags indicate error on 1 */
- /* SR.0 is undefined */
- /* Timeout is our faked flag */
-
- /* sequence is described in Intel 290644-005 document */
-
- /* check Timeout */
- if (code & BIT_TIMEOUT) {
- puts ("Timeout\n");
- return ERR_TIMOUT;
- }
-
- /* check Busy, SR.7 */
- if (~code & BIT_BUSY) {
- puts ("Busy\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Vpp low, SR.3 */
- if (code & BIT_VPP_RANGE_ERROR) {
- puts ("Vpp range error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Device Protect Error, SR.1 */
- if (code & BIT_PROTECT_ERROR) {
- puts ("Device protect error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Command Seq Error, SR.4 & SR.5 */
- if (code & BIT_SEQUENCE_ERROR) {
- puts ("Command seqence error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Block Erase Error, SR.5 */
- if (code & BIT_ERASE_ERROR) {
- puts ("Block erase error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Program Error, SR.4 */
- if (code & BIT_PROGRAM_ERROR) {
- puts ("Program error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Block Erase Suspended, SR.6 */
- if (code & BIT_ERASE_SUSPEND) {
- puts ("Block erase suspended\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Program Suspended, SR.2 */
- if (code & BIT_PROGRAM_SUSPEND) {
- puts ("Program suspended\n");
- return ERR_PROG_ERROR;
- }
-
- /* OK, no error */
- return ERR_OK;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- ulong result, result1;
- int iflag, prot, sect;
- int rc = ERR_OK;
- ulong start;
-
-#ifdef USE_920T_MMU
- int cflag;
-#endif
-
- debug ("flash_erase: s_first %d s_last %d\n", s_first, s_last);
-
- /* first look for protection bits */
-
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
-
- if ((s_first < 0) || (s_first > s_last)) {
- return ERR_INVAL;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (INTEL_MANUFACT & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
-#ifdef USE_920T_MMU
- cflag = dcache_status ();
- dcache_disable ();
-#endif
- iflag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-
- debug ("Erasing sector %2d @ %08lX... ",
- sect, info->start[sect]);
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- if (info->protect[sect] == 0) { /* not protected */
- vu_long *addr = (vu_long *) (info->start[sect]);
- ulong bsR7, bsR7_2, bsR5, bsR5_2;
-
- /* *addr = CMD_STATUS_RESET; */
- *addr = CMD_ERASE_SETUP;
- *addr = CMD_ERASE_CONFIRM;
-
- /* wait until flash is ready */
- do {
- /* check timeout */
- if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- *addr = CMD_STATUS_RESET;
- result = BIT_TIMEOUT;
- break;
- }
-
- *addr = CMD_STATUS_READ;
- result = *addr;
- bsR7 = result & (1 << 7);
- bsR7_2 = result & (1 << 23);
- } while (!bsR7 | !bsR7_2);
-
- *addr = CMD_STATUS_READ;
- result1 = *addr;
- bsR5 = result1 & (1 << 5);
- bsR5_2 = result1 & (1 << 21);
-#ifdef SAMSUNG_FLASH_DEBUG
- printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2);
- if (bsR5 != 0 && bsR5_2 != 0)
- printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2);
-#endif
-
- *addr = CMD_READ_ARRAY;
- *addr = CMD_RESUME;
-
- if ((rc = flash_error (result)) != ERR_OK)
- goto outahere;
-#if 0
- printf ("ok.\n");
- } else { /* it was protected */
-
- printf ("protected!\n");
-#endif
- }
- }
-
-outahere:
- /* allow flash to settle - wait 10 ms */
- udelay_masked (10000);
-
- if (iflag)
- enable_interrupts ();
-
-#ifdef USE_920T_MMU
- if (cflag)
- dcache_enable ();
-#endif
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
- vu_long *addr = (vu_long *) dest;
- ulong result;
- int rc = ERR_OK;
- int iflag;
- ulong start;
-
-#ifdef USE_920T_MMU
- int cflag;
-#endif
-
- /*
- * Check if Flash is (sufficiently) erased
- */
- result = *addr;
- if ((result & data) != data)
- return ERR_NOT_ERASED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- *@address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
-#ifdef USE_920T_MMU
- cflag = dcache_status ();
- dcache_disable ();
-#endif
- iflag = disable_interrupts ();
-
- /* *addr = CMD_STATUS_RESET; */
- *addr = CMD_PROGRAM;
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- /* wait until flash is ready */
- do {
- /* check timeout */
- if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- *addr = CMD_SUSPEND;
- result = BIT_TIMEOUT;
- break;
- }
-
- *addr = CMD_STATUS_READ;
- result = *addr;
- } while (~result & BIT_BUSY);
-
- /* *addr = CMD_READ_ARRAY; */
- *addr = CMD_STATUS_READ;
- result = *addr;
-
- rc = flash_error (result);
-
- if (iflag)
- enable_interrupts ();
-
-#ifdef USE_920T_MMU
- if (cflag)
- dcache_enable ();
-#endif
- *addr = CMD_READ_ARRAY;
- *addr = CMD_RESUME;
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int l;
- int i, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 24);
- }
- for (; i < 4 && cnt > 0; ++i) {
- data = (data >> 8) | (*src++ << 24);
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 4; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 24);
- }
-
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = *((vu_long *) src);
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- src += 4;
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return ERR_OK;
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 24);
- --cnt;
- }
- for (; i < 4; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 24);
- }
-
- return write_word (info, wp, data);
-}
diff --git a/board/samsung/smdk2400/lowlevel_init.S b/board/samsung/smdk2400/lowlevel_init.S
deleted file mode 100644
index c275c07..0000000
--- a/board/samsung/smdk2400/lowlevel_init.S
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
- * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
- *
- * Modified for the Samsung development board by
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-
-
-/* some parameters for the board */
-
-/*
- *
- * Taken from linux/arch/arm/boot/compressed/head-s3c2400.S
- *
- * Copyright (C) 2001 Samsung Electronics by chc, 010406
- *
- * S3C2400 specific tweaks.
- *
- */
-
-/* memory controller */
-#define BWSCON 0x14000000
-#define BANKCON3 0x14000010 /* for cs8900, ethernet */
-
-/* Bank0 */
-#define B0_Tacs 0x0 /* 0 clk */
-#define B0_Tcos 0x0 /* 0 clk */
-#define B0_Tacc 0x7 /* 14 clk */
-#define B0_Tcoh 0x0 /* 0 clk */
-#define B0_Tah 0x0 /* 0 clk */
-#define B0_Tacp 0x0
-#define B0_PMC 0x0 /* normal */
-
-/* Bank1 */
-#define B1_Tacs 0x0 /* 0 clk */
-#define B1_Tcos 0x0 /* 0 clk */
-#define B1_Tacc 0x7 /* 14 clk */
-#define B1_Tcoh 0x0 /* 0 clk */
-#define B1_Tah 0x0 /* 0 clk */
-#define B1_Tacp 0x0
-#define B1_PMC 0x0 /* normal */
-
-/* Bank2 */
-#define B2_Tacs 0x0 /* 0 clk */
-#define B2_Tcos 0x0 /* 0 clk */
-#define B2_Tacc 0x7 /* 14 clk */
-#define B2_Tcoh 0x0 /* 0 clk */
-#define B2_Tah 0x0 /* 0 clk */
-#define B2_Tacp 0x0
-#define B2_PMC 0x0 /* normal */
-
-/* Bank3 - setup for the cs8900 */
-#define B3_Tacs 0x0 /* 0 clk */
-#define B3_Tcos 0x3 /* 4 clk */
-#define B3_Tacc 0x7 /* 14 clk */
-#define B3_Tcoh 0x1 /* 1 clk */
-#define B3_Tah 0x0 /* 0 clk */
-#define B3_Tacp 0x3 /* 6 clk */
-#define B3_PMC 0x0 /* normal */
-
-/* Bank4 */
-#define B4_Tacs 0x0 /* 0 clk */
-#define B4_Tcos 0x0 /* 0 clk */
-#define B4_Tacc 0x7 /* 14 clk */
-#define B4_Tcoh 0x0 /* 0 clk */
-#define B4_Tah 0x0 /* 0 clk */
-#define B4_Tacp 0x0
-#define B4_PMC 0x0 /* normal */
-
-/* Bank5 */
-#define B5_Tacs 0x0 /* 0 clk */
-#define B5_Tcos 0x0 /* 0 clk */
-#define B5_Tacc 0x7 /* 14 clk */
-#define B5_Tcoh 0x0 /* 0 clk */
-#define B5_Tah 0x0 /* 0 clk */
-#define B5_Tacp 0x0
-#define B5_PMC 0x0 /* normal */
-
-/* Bank6 */
-#define B6_MT 0x3 /* SDRAM */
-#define B6_Trcd 0x1 /* 3clk */
-#define B6_SCAN 0x1 /* 9 bit */
-
-/* Bank7 */
-#define B7_MT 0x3 /* SDRAM */
-#define B7_Trcd 0x1 /* 3clk */
-#define B7_SCAN 0x1 /* 9 bit */
-
-/* refresh parameter */
-#define REFEN 0x1 /* enable refresh */
-#define TREFMD 0x0 /* CBR(CAS before RAS)/auto refresh */
-#define Trp 0x0 /* 2 clk */
-#define Trc 0x3 /* 7 clk */
-#define Tchr 0x2 /* 3 clk */
-
-#define REFCNT 1113 /* period=15.6 us, HCLK=60Mhz, (2048+1-15.6*66) */
-
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE
-
-.globl lowlevel_init
-lowlevel_init:
- /* memory control configuration */
- /* make r0 relative the current location so that it */
- /* reads SMRDATA out of FLASH rather than memory ! */
- ldr r0, =SMRDATA
- ldr r1, _TEXT_BASE
- sub r0, r0, r1
- ldr r1, =BWSCON /* Bus Width Status Controller */
- add r2, r0, #52
-0:
- ldr r3, [r0], #4
- str r3, [r1], #4
- cmp r2, r0
- bne 0b
-
- /* everything is fine now */
- mov pc, lr
-
- .ltorg
-/* the literal pools origin */
-
-SMRDATA:
- .word 0x2211d114 /* d->Ethernet, BUSWIDTH=32 */
- .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /* GCS0 */
- .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /* GCS1 */
- .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /* GCS2 */
- .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /* GCS3 */
- .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /* GCS4 */
- .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /* GCS5 */
- .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) /* GCS6 */
- .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) /* GCS7 */
- .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
- .word 0x10 /* BUSWIDTH=32, SCLK power saving mode, BANKSIZE 32M/32M */
- .word 0x30 /* MRSR6, CL=3clk */
- .word 0x30 /* MRSR7 */
diff --git a/board/samsung/smdk2400/smdk2400.c b/board/samsung/smdk2400/smdk2400.c
deleted file mode 100644
index 895bd77..0000000
--- a/board/samsung/smdk2400/smdk2400.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/s3c24x0_cpu.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_MODEM_SUPPORT
-static int key_pressed(void);
-int mdm_init (bd_t *);
-extern void disable_putc(void);
-extern void enable_putc(void);
-extern int hwflow_onoff(int);
-extern int do_mdm_init; /* defined in common/main.c */
-#endif /* CONFIG_MODEM_SUPPORT */
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- struct s3c24x0_clock_power * const clk_power =
- s3c24x0_get_base_clock_power();
- struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
-
- /* memory and cpu-speed are setup before relocation */
- /* change the clock to be 50 MHz 1:1:1 */
- clk_power->mpllcon = 0x5c042;
- clk_power->clkdivn = 0;
- /* set up the I/O ports */
- gpio->pacon = 0x3ffff;
- gpio->pbcon = 0xaaaaaaaa;
- gpio->pbup = 0xffff;
- gpio->pecon = 0x0;
- gpio->peup = 0x0;
-#ifdef CONFIG_HWFLOW
- /*CTS[0] RTS[0] INPUT INPUT TXD[0] INPUT RXD[0] */
- /* 10, 10, 00, 00, 10, 00, 10 */
- gpio->pfcon = 0xa22;
- /* Disable pull-up on Rx, Tx, CTS and RTS pins */
- gpio->pfup = 0x35;
-#else
- /*INPUT INPUT INPUT INPUT TXD[0] INPUT RXD[0] */
- /* 00, 00, 00, 00, 10, 00, 10 */
- gpio->pfcon = 0x22;
- /* Disable pull-up on Rx and Tx pins */
- gpio->pfup = 0x5;
-#endif /* CONFIG_HWFLOW */
- gpio->pgcon = 0x0;
- gpio->pgup = 0x0;
- gpio->opencr = 0x0;
-
- /* arch number of SAMSUNG-Board to MACH_TYPE_SMDK2400 */
- gd->bd->bi_arch_number = MACH_TYPE_SMDK2400;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x0C000100;
-
-#ifdef CONFIG_MODEM_SUPPORT
- if (key_pressed()) {
- disable_putc(); /* modem doesn't understand banner etc */
- do_mdm_init = 1;
- }
-#endif /* CONFIG_MODEM_SUPPORT */
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
-
-#ifdef CONFIG_MODEM_SUPPORT
-static int key_pressed(void)
-{
- int rc;
- if (1) { /* check for button push here, now just return 1 */
- rc = 1;
- }
-
- return rc;
-}
-#endif /* CONFIG_MODEM_SUPPORT */
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_CS8900
- rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/boards.cfg b/boards.cfg
index 8a501ae..f70afe2 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -67,7 +67,6 @@ scb9328 arm arm920t - -
cm4008 arm arm920t - - ks8695
cm41xx arm arm920t - - ks8695
VCMA9 arm arm920t vcma9 mpl s3c24x0
-smdk2400 arm arm920t - samsung s3c24x0
smdk2410 arm arm920t - samsung s3c24x0
voiceblue arm arm925t
omap1510inn arm arm925t - ti
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 0c62885..19bd1d6 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+smdk2400 arm arm920t - 2011-07-17 Gary Jennejohn <garyj@denx.de>
sbc2410x arm arm920t - 2011-07-17
netstar arm arm925t - 2011-07-17
mx1fs2 arm arm920t - 2011-07-17
diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h
deleted file mode 100644
index 064749e..0000000
--- a/include/configs/smdk2400.h
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * (C) Copyright 2002-2005
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- * Gary Jennejohn <garyj@denx.de>
- *
- * Configuation settings for the SAMSUNG board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM920T 1 /* This is an ARM920T core */
-#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */
-#define CONFIG_S3C2400 1 /* specifically a SAMSUNG S3C2400 SoC */
-#define CONFIG_SMDK2400 1 /* on an SAMSUNG SMDK2400 Board */
-
-/* input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ 12000000 /* SMDK2400 has 12 MHz input clock */
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_CS8900 /* we have a CS8900 on-board */
-#define CONFIG_CS8900_BASE 0x07000300 /* agrees with WIN CE PA */
-#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_S3C24X0_SERIAL
-#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SAMSUNG */
-
-#undef CONFIG_HWFLOW /* include RTS/CTS flow control support */
-
-#undef CONFIG_MODEM_SUPPORT /* enable modem initialization stuff */
-
-/*
- * The following enables modem debugging stuff. The dbg() and
- * 'char screen[1024]' are used for debug printfs. Unfortunately,
- * it is usable only from BDI
- */
-#undef CONFIG_MODEM_SUPPORT_DEBUG
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */
-
-/* Use s3c2400's RTC */
-#define CONFIG_RTC_S3C24X0 1
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_SNTP
-
-#if defined(CONFIG_HWFLOW)
- #define CONFIG_CONFIG_HWFLOW
-#endif
-
-#if !defined(USE_920T_MMU)
- #undef CONFIG_CMD_CACHE
-#endif
-
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 134.98.93.36
-#define CONFIG_SERVERIP 134.98.93.22
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "SMDK2400 # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0c000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0e000000 /* 32 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x0cf00000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x0c000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-
-#define CONFIG_SYS_FLASH_BASE 0x00000000 /* Flash Bank #1 */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT (64) /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-
-/* Address and size of Primary Environment Sector */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000)
-#define CONFIG_ENV_SIZE 0x40000
-
-/* Address and size of Redundant Environment Sector */
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 35+ messages in thread* [U-Boot] [PATCH v2 09/16] ARM: remove broken "versatile" boards.
2011-08-26 12:25 ` [U-Boot] [PATCH v2 00/16] " Wolfgang Denk
` (7 preceding siblings ...)
2011-08-26 12:25 ` [U-Boot] [PATCH v2 08/16] ARM: remove broken "smdk2400" board Wolfgang Denk
@ 2011-08-26 12:25 ` Wolfgang Denk
2011-08-26 12:56 ` Stefano Babic
2011-08-26 12:25 ` [U-Boot] [PATCH v2 10/16] ARM: remove broken "voiceblue" board Wolfgang Denk
` (6 subsequent siblings)
15 siblings, 1 reply; 35+ messages in thread
From: Wolfgang Denk @ 2011-08-26 12:25 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAINTAINERS | 2 -
MAKEALL | 3 -
README | 2 +-
board/armltd/versatile/Makefile | 51 ------
board/armltd/versatile/lowlevel_init.S | 34 ----
board/armltd/versatile/split_by_variant.sh | 42 -----
board/armltd/versatile/versatile.c | 111 ------------
doc/README.scrapyard | 1 +
include/configs/versatile.h | 252 ----------------------------
9 files changed, 2 insertions(+), 496 deletions(-)
delete mode 100644 board/armltd/versatile/Makefile
delete mode 100644 board/armltd/versatile/lowlevel_init.S
delete mode 100755 board/armltd/versatile/split_by_variant.sh
delete mode 100644 board/armltd/versatile/versatile.c
delete mode 100644 include/configs/versatile.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 4927d4b..4de0231 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -545,8 +545,6 @@ Unknown / orphaned boards:
EVB64260 MPC7xx_74xx
integratorcp various
- versatile ARM926EJ-S
- versatile ARM926EJ-S
#########################################################################
diff --git a/MAKEALL b/MAKEALL
index 73a053d..d6d04b7 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -346,9 +346,6 @@ LIST_ARM9=" \
spear320 \
spear600 \
VCMA9 \
- versatile \
- versatileab \
- versatilepb \
voiceblue \
davinci_dvevm \
davinci_schmoogie \
diff --git a/README b/README
index 0886987..d3bcb14 100644
--- a/README
+++ b/README
@@ -532,7 +532,7 @@ The following options need to be configured:
If you have Amba PrimeCell PL010 or PL011 UARTs on your board,
define this to a list of base addresses for each (supported)
- port. See e.g. include/configs/versatile.h
+ port.
CONFIG_PL011_SERIAL_RLCR
diff --git a/board/armltd/versatile/Makefile b/board/armltd/versatile/Makefile
deleted file mode 100644
index 3470328..0000000
--- a/board/armltd/versatile/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := versatile.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/armltd/versatile/lowlevel_init.S b/board/armltd/versatile/lowlevel_init.S
deleted file mode 100644
index bdfce2d..0000000
--- a/board/armltd/versatile/lowlevel_init.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2003, ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-/* Set up the platform, once the cpu has been initialized */
-.globl lowlevel_init
-lowlevel_init:
-
- /* All done by Versatile's boot monitor! */
- mov pc, lr
diff --git a/board/armltd/versatile/split_by_variant.sh b/board/armltd/versatile/split_by_variant.sh
deleted file mode 100755
index 475e5a3..0000000
--- a/board/armltd/versatile/split_by_variant.sh
+++ /dev/null
@@ -1,42 +0,0 @@
-#!/bin/sh
-# ---------------------------------------------------------
-# Set the core module defines according to Core Module
-# ---------------------------------------------------------
-# ---------------------------------------------------------
-# Set up the Versatile type define
-# ---------------------------------------------------------
-
-mkdir -p ${obj}include
-variant=PB926EJ-S
-if [ "$1" = "" ]
-then
- echo "$0:: No parameters - using versatilepb_config"
- echo "#define CONFIG_ARCH_VERSATILE_PB" > ${obj}include/config.h
- variant=PB926EJ-S
-else
- case "$1" in
- versatilepb_config | \
- versatile_config)
- echo "#define CONFIG_ARCH_VERSATILE_PB" > ${obj}include/config.h
- ;;
-
- versatileab_config)
- echo "#define CONFIG_ARCH_VERSATILE_AB" > ${obj}include/config.h
- variant=AB926EJ-S
- ;;
-
-
- *)
- echo "$0:: Unrecognised config - using versatilepb_config"
- echo "#define CONFIG_ARCH_VERSATILE_PB" > ${obj}include/config.h
- variant=PB926EJ-S
- ;;
-
- esac
-
-fi
-# ---------------------------------------------------------
-# Complete the configuration
-# ---------------------------------------------------------
-$MKCONFIG -a versatile arm arm926ejs versatile armltd versatile
-echo "Variant:: $variant"
diff --git a/board/armltd/versatile/versatile.c b/board/armltd/versatile/versatile.c
deleted file mode 100644
index ee8cb5e..0000000
--- a/board/armltd/versatile/versatile.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * (C) Copyright 2004
- * ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_SHOW_BOOT_PROGRESS)
-void show_boot_progress(int progress)
-{
- printf("Boot reached stage %d\n", progress);
-}
-#endif
-
-#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_early_init_f (void)
-{
- /*
- * set clock frequency:
- * VERSATILE_REFCLK is 32KHz
- * VERSATILE_TIMCLK is 1MHz
- */
- *(volatile unsigned int *)(VERSATILE_SCTL_BASE) |=
- ((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
- (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel));
-
- return 0;
-}
-
-int board_init (void)
-{
- /* arch number of Versatile Board */
- gd->bd->bi_arch_number = MACH_TYPE_VERSATILE_PB;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x00000100;
-
- gd->flags = 0;
-
- icache_enable ();
-
- return 0;
-}
-
-
-int misc_init_r (void)
-{
- setenv("verify", "n");
- return (0);
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-int dram_init (void)
-{
- /* dram_init must store complete ramsize in gd->ram_size */
- gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE,
- PHYS_SDRAM_1_SIZE);
- return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC91111
- rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 19bd1d6..087e0e1 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+versatile arm ARM926EJS - 2011-07-17 Peter Pearse <peter.pearse@arm.com>
smdk2400 arm arm920t - 2011-07-17 Gary Jennejohn <garyj@denx.de>
sbc2410x arm arm920t - 2011-07-17
netstar arm arm925t - 2011-07-17
diff --git a/include/configs/versatile.h b/include/configs/versatile.h
deleted file mode 100644
index 32cee82..0000000
--- a/include/configs/versatile.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * (C) Copyright 2003
- * Texas Instruments.
- * Kshitij Gupta <kshitij@ti.com>
- * Configuation settings for the TI OMAP Innovator board.
- *
- * (C) Copyright 2004
- * ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- * Configuration for Versatile PB.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */
-#define CONFIG_VERSATILE 1 /* in Versatile Platform Board */
-#define CONFIG_ARCH_VERSATILE 1 /* Specifically, a Versatile */
-
-#ifndef CONFIG_ARCH_VERSATILE_AB /* AB */
-#define CONFIG_ARCH_VERSATILE_PB /* Versatile PB is default */
-#endif
-
-#define CONFIG_SYS_MEMTEST_START 0x100000
-#define CONFIG_SYS_MEMTEST_END 0x10000000
-#define CONFIG_SYS_HZ (1000000 / 256)
-#define CONFIG_SYS_TIMERBASE 0x101E2000 /* Timer 0 and 1 base */
-
-#define CONFIG_SYS_TIMER_INTERVAL 10000
-#define CONFIG_SYS_TIMER_RELOAD (CONFIG_SYS_TIMER_INTERVAL >> 4)
-#define CONFIG_SYS_TIMER_CTRL 0x84 /* Enable, Clock / 16 */
-
-/*
- * control registers
- */
-#define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */
-
-/*
- * System controller bit assignment
- */
-#define VERSATILE_REFCLK 0
-#define VERSATILE_TIMCLK 1
-
-#define VERSATILE_TIMER1_EnSel 15
-#define VERSATILE_TIMER2_EnSel 17
-#define VERSATILE_TIMER3_EnSel 19
-#define VERSATILE_TIMER4_EnSel 21
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_MISC_INIT_R 1
-/*
- * Size of malloc() pool
- */
-#define CONFIG_ENV_SIZE 8192
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
-
-/*
- * Hardware drivers
- */
-
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111
-#define CONFIG_SMC_USE_32_BIT
-#define CONFIG_SMC91111_BASE 0x10010000
-#undef CONFIG_SMC91111_EXT_PHY
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_PL011_SERIAL
-#define CONFIG_PL011_CLOCK 24000000
-#define CONFIG_PL01x_PORTS \
- {(void *)CONFIG_SYS_SERIAL0, \
- (void *)CONFIG_SYS_SERIAL1 }
-#define CONFIG_CONS_INDEX 0
-
-#define CONFIG_BAUDRATE 38400
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_SYS_SERIAL0 0x101F1000
-#define CONFIG_SYS_SERIAL1 0x101F2000
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVEENV
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_SUBNETMASK
-
-#define CONFIG_BOOTDELAY 2
-#define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp "\
- "netdev=25,0,0xf1010000,0xf1010010,eth0"
-
-/*
- * Static configuration when assigning fixed address
- */
-#define CONFIG_BOOTFILE "/tftpboot/uImage" /* file to load */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-/* Monitor Command Prompt */
-#ifdef CONFIG_ARCH_VERSATILE_AB
-# define CONFIG_SYS_PROMPT "VersatileAB # "
-#else
-# define CONFIG_SYS_PROMPT "VersatilePB # "
-#endif
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE \
- (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
-#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR 0x00800000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x000FFFFF
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_GBL_DATA_OFFSET)
-
-#define CONFIG_BOARD_EARLY_INIT_F
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#ifdef CONFIG_ARCH_VERSATILE_QEMU
-#define CONFIG_SYS_TEXT_BASE 0x10000
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_SYS_MONITOR_LEN 0x80000
-#else
-#define CONFIG_SYS_TEXT_BASE 0x01000000
-/*
- * Use the CFI flash driver for ease of use
- */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_ENV_IS_IN_FLASH 1
-/*
- * System control register
- */
-#define VERSATILE_SYS_BASE 0x10000000
-#define VERSATILE_SYS_FLASH_OFFSET 0x4C
-#define VERSATILE_FLASHCTRL \
- (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET)
-/* Enable writing to flash */
-#define VERSATILE_FLASHPROG_FLVPPEN (1 << 0)
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Write Timeout */
-
-/*
- * Note that CONFIG_SYS_MAX_FLASH_SECT allows for a parameter block
- * i.e.
- * the bottom "sector" (bottom boot), or top "sector"
- * (top boot), is a seperate erase region divided into
- * 4 (equal) smaller sectors. This, notionally, allows
- * quicker erase/rewrire of the most frequently changed
- * area......
- * CONFIG_SYS_MAX_FLASH_SECT is padded up to a multiple of 4
- */
-
-#ifdef CONFIG_ARCH_VERSATILE_AB
-#define FLASH_SECTOR_SIZE 0x00020000 /* 128 KB sectors */
-#define CONFIG_ENV_SECT_SIZE (2 * FLASH_SECTOR_SIZE)
-#define CONFIG_SYS_MAX_FLASH_SECT (520)
-#endif
-
-#ifdef CONFIG_ARCH_VERSATILE_PB /* Versatile PB is default */
-#define FLASH_SECTOR_SIZE 0x00040000 /* 256 KB sectors */
-#define CONFIG_ENV_SECT_SIZE FLASH_SECTOR_SIZE
-#define CONFIG_SYS_MAX_FLASH_SECT (260)
-#endif
-
-#define CONFIG_SYS_FLASH_BASE 0x34000000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-
-#define CONFIG_SYS_MONITOR_LEN (4 * CONFIG_ENV_SECT_SIZE)
-
-/* The ARM Boot Monitor is shipped in the lowest sector of flash */
-
-#define FLASH_TOP (CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE)
-#define CONFIG_ENV_ADDR (FLASH_TOP - CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_ENV_ADDR - CONFIG_SYS_MONITOR_LEN)
-
-#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
-
-#endif
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 35+ messages in thread* [U-Boot] [PATCH v2 09/16] ARM: remove broken "versatile" boards.
2011-08-26 12:25 ` [U-Boot] [PATCH v2 09/16] ARM: remove broken "versatile" boards Wolfgang Denk
@ 2011-08-26 12:56 ` Stefano Babic
2011-08-30 6:47 ` Albert ARIBAUD
0 siblings, 1 reply; 35+ messages in thread
From: Stefano Babic @ 2011-08-26 12:56 UTC (permalink / raw)
To: u-boot
On 08/26/2011 02:25 PM, Wolfgang Denk wrote:
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> ---
> MAINTAINERS | 2 -
> MAKEALL | 3 -
> README | 2 +-
> board/armltd/versatile/Makefile | 51 ------
> board/armltd/versatile/lowlevel_init.S | 34 ----
> board/armltd/versatile/split_by_variant.sh | 42 -----
> board/armltd/versatile/versatile.c | 111 ------------
> doc/README.scrapyard | 1 +
> include/configs/versatile.h | 252 ----------------------------
> 9 files changed, 2 insertions(+), 496 deletions(-)
> delete mode 100644 board/armltd/versatile/Makefile
> delete mode 100644 board/armltd/versatile/lowlevel_init.S
> delete mode 100755 board/armltd/versatile/split_by_variant.sh
> delete mode 100644 board/armltd/versatile/versatile.c
> delete mode 100644 include/configs/versatile.h
Hi Wolfgang,
your patch removes also the possibility to run the versatilepb board in
qemu environment (target versatileqemu in boards.cfg). For that I sent a
patch that it is already in mainline (commit
d388298a59ba375c76597b8f95b560afa971a0fb).
I will suggest to remove only the split_by_variant.sh file in this patch.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 35+ messages in thread
* [U-Boot] [PATCH v2 09/16] ARM: remove broken "versatile" boards.
2011-08-26 12:56 ` Stefano Babic
@ 2011-08-30 6:47 ` Albert ARIBAUD
2011-08-30 7:16 ` Stefano Babic
0 siblings, 1 reply; 35+ messages in thread
From: Albert ARIBAUD @ 2011-08-30 6:47 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 26/08/2011 14:56, Stefano Babic a ?crit :
> On 08/26/2011 02:25 PM, Wolfgang Denk wrote:
>> Signed-off-by: Wolfgang Denk<wd@denx.de>
>> ---
>> MAINTAINERS | 2 -
>> MAKEALL | 3 -
>> README | 2 +-
>> board/armltd/versatile/Makefile | 51 ------
>> board/armltd/versatile/lowlevel_init.S | 34 ----
>> board/armltd/versatile/split_by_variant.sh | 42 -----
>> board/armltd/versatile/versatile.c | 111 ------------
>> doc/README.scrapyard | 1 +
>> include/configs/versatile.h | 252 ----------------------------
>> 9 files changed, 2 insertions(+), 496 deletions(-)
>> delete mode 100644 board/armltd/versatile/Makefile
>> delete mode 100644 board/armltd/versatile/lowlevel_init.S
>> delete mode 100755 board/armltd/versatile/split_by_variant.sh
>> delete mode 100644 board/armltd/versatile/versatile.c
>> delete mode 100644 include/configs/versatile.h
>
> Hi Wolfgang,
>
> your patch removes also the possibility to run the versatilepb board in
> qemu environment (target versatileqemu in boards.cfg). For that I sent a
> patch that it is already in mainline (commit
> d388298a59ba375c76597b8f95b560afa971a0fb).
>
> I will suggest to remove only the split_by_variant.sh file in this patch.
Building all versatile boards here with ELDK4.2 on a Natty Ubuntu, I get
warnings of two sorts:
1) in the QEMU build, you needlessly cast a pointer as 'volatile', which
I missed on review but which my compiler does not like -- I did a
general removal patch for code in U-Boot that calls get_ram_size() with
a volatile-cast argument.
2) There are a lot of redefinitions, apparently a double include.
Can you look into this?
uboot at lilith:~/src/u-boot-arm$ ./MAKEALL versatileqemu versatilepb
versatileab
Configuring for versatileqemu - Board: versatile, Options:
ARCH_VERSATILE_QEMU
versatile.c: In function 'dram_init':
versatile.c:98: warning: passing argument 1 of 'get_ram_size' discards
qualifiers from pointer target type
text data bss dec hex filename
100896 2140 12020 115056 1c170 ./u-boot
Configuring for versatilepb - Board: versatile, Options: ARCH_VERSATILE_PB
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from include/common.h:37:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from include/common.h:37:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from include/common.h:41:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from include/common.h:37:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from lib/asm-offsets.c:18:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from lib/asm-offsets.c:18:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from lib/asm-offsets.c:18:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from lib/asm-offsets.c:18:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from hello_world.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from hello_world.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from hello_world.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from hello_world.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from smc91111_eeprom.c:30:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from smc91111_eeprom.c:30:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from smc91111_eeprom.c:30:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from smc91111_eeprom.c:30:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from /home/uboot/src/u-boot-arm/include/exports.h:6,
from stubs.c:1:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from /home/uboot/src/u-boot-arm/include/exports.h:6,
from stubs.c:1:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from /home/uboot/src/u-boot-arm/include/exports.h:6,
from stubs.c:1:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from /home/uboot/src/u-boot-arm/include/exports.h:6,
from stubs.c:1:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from start.S:35:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from start.S:35:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cpu.c:32:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from cpu.c:32:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from cpu.c:32:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cpu.c:32:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from part.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from part.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from part.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from part.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from timer.c:38:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from timer.c:38:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from timer.c:38:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from timer.c:38:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from board.c:41:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from board.c:41:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from board.c:41:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from board.c:41:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from bootm.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from bootm.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from bootm.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from bootm.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cache.c:26:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from cache.c:26:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from cache.c:26:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cache.c:26:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cache-cp15.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from cache-cp15.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from cache-cp15.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cache-cp15.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from interrupts.c:38:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from interrupts.c:38:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from interrupts.c:38:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from interrupts.c:38:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from reset.c:40:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from reset.c:40:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from reset.c:40:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from reset.c:40:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from eabi_compat.c:12:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from eabi_compat.c:12:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from eabi_compat.c:12:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from eabi_compat.c:12:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cfi_flash.c:37:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from cfi_flash.c:37:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from cfi_flash.c:37:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cfi_flash.c:37:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_bdinfo.c:27:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_bdinfo.c:27:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from cmd_bdinfo.c:27:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_bdinfo.c:27:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_boot.c:27:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_boot.c:27:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from cmd_boot.c:27:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_boot.c:27:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_bootm.c:28:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_bootm.c:28:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from cmd_bootm.c:28:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_bootm.c:28:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_flash.c:27:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_flash.c:27:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from cmd_flash.c:27:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_flash.c:27:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from smc91111.c:62:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from smc91111.c:62:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from smc91111.c:62:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from smc91111.c:62:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_help.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_help.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from cmd_help.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_help.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_load.c:27:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_load.c:27:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from cmd_load.c:27:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_load.c:27:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_mem.c:30:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_mem.c:30:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from cmd_mem.c:30:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_mem.c:30:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_net.c:27:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_net.c:27:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from cmd_net.c:27:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_net.c:27:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from rpx_pcmcia.c:4:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from rpx_pcmcia.c:4:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from rpx_pcmcia.c:4:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from rpx_pcmcia.c:4:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_nvedit.c:43:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_nvedit.c:43:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from cmd_nvedit.c:43:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_nvedit.c:43:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from tqm8xx_pcmcia.c:5:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from tqm8xx_pcmcia.c:5:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from tqm8xx_pcmcia.c:5:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from tqm8xx_pcmcia.c:5:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from date.c:28:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from date.c:28:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_pcmcia.c:56:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_pcmcia.c:56:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from date.c:28:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from date.c:28:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from cmd_pcmcia.c:56:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_pcmcia.c:56:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_version.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_version.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from cmd_version.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from cmd_version.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from command.c:28:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from command.c:28:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from command.c:28:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from command.c:28:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from console.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from console.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from console.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from console.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from serial_pl01x.c:30:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from serial_pl01x.c:30:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from serial_pl01x.c:30:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from serial_pl01x.c:30:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from dlmalloc.c:1:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from dlmalloc.c:1:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from dlmalloc.c:1:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from dlmalloc.c:1:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from env_common.c:27:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from env_common.c:27:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from env_common.c:27:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from env_common.c:27:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from env_flash.c:29:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from env_flash.c:29:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from env_flash.c:29:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from env_flash.c:29:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from exports.c:1:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from exports.c:1:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from exports.c:1:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from exports.c:1:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from flash.c:26:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from flash.c:26:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from flash.c:26:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from flash.c:26:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from image.c:27:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from image.c:27:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from image.c:27:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from image.c:27:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from main.c:30:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from main.c:30:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from main.c:30:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from main.c:30:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from memsize.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from memsize.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from s_record.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from s_record.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from s_record.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from s_record.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from stdio.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from stdio.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from stdio.c:25:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from stdio.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from xyzModem.c:57:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from xyzModem.c:57:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from xyzModem.c:57:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from xyzModem.c:57:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from env_embedded.c:28:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from env_embedded.c:28:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/compiler.h:110,
from /home/uboot/src/u-boot-arm/include/environment.h:133,
from env_embedded.c:30:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from env_embedded.c:28:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from zlib.h:5,
from zutil.h:17,
from zlib.c:15:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from zlib.h:5,
from zutil.h:17,
from zlib.c:15:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from zlib.h:5,
from zutil.h:17,
from zlib.c:15:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from zlib.h:5,
from zutil.h:17,
from zlib.c:15:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from bootp.c:11:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from bootp.c:11:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from bootp.c:11:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from bootp.c:11:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from eth.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from eth.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from eth.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from eth.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from net.c:77:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from net.c:77:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from net.c:77:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from net.c:77:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from crc32.c:12:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from crc32.c:12:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from crc32.c:12:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from crc32.c:12:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from tftp.c:9:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from tftp.c:9:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from tftp.c:9:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from tftp.c:9:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from display_options.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from display_options.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from display_options.c:25:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from display_options.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from gunzip.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from gunzip.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from gunzip.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from gunzip.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from hashtable.c:44:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from hashtable.c:44:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from hashtable.c:44:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from hashtable.c:44:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from lmb.c:13:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from lmb.c:13:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from lmb.c:13:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from lmb.c:13:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from net_utils.c:29:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from net_utils.c:29:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from net_utils.c:29:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from net_utils.c:29:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from /home/uboot/src/u-boot-arm/include/exports.h:6,
from qsort.c:19:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from /home/uboot/src/u-boot-arm/include/exports.h:6,
from qsort.c:19:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from /home/uboot/src/u-boot-arm/include/exports.h:6,
from qsort.c:19:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from /home/uboot/src/u-boot-arm/include/exports.h:6,
from qsort.c:19:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from strmhz.c:23:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from strmhz.c:23:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from strmhz.c:23:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from strmhz.c:23:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from string.c:19:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from string.c:19:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from time.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from time.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from time.c:24:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from time.c:24:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from vsprintf.c:14:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from vsprintf.c:14:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from vsprintf.c:18:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from vsprintf.c:14:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from versatile.c:36:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/common.h:37,
from versatile.c:36:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
In file included from /home/uboot/src/u-boot-arm/include/asm/string.h:4,
from /home/uboot/src/u-boot-arm/include/linux/string.h:21,
from /home/uboot/src/u-boot-arm/include/common.h:41,
from versatile.c:36:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from /home/uboot/src/u-boot-arm/include/common.h:37,
from versatile.c:36:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
this is the location of the previous definition
versatile.c: In function 'dram_init':
versatile.c:98: warning: passing argument 1 of 'get_ram_size' discards
qualifiers from pointer target type
In file included from /home/uboot/src/u-boot-arm/include/config.h:6,
from lowlevel_init.S:26:
/home/uboot/src/u-boot-arm/include/configs/versatile.h:43:1: warning:
"CONFIG_ARCH_VERSATILE_PB" redefined
In file included from lowlevel_init.S:26:
/home/uboot/src/u-boot-arm/include/config.h:2:1: warning: this is the
location of the previous definition
text data bss dec hex filename
116776 2196 13384 132356 20504 ./u-boot
Configuring for versatileab - Board: versatile, Options: ARCH_VERSATILE_AB
versatile.c: In function 'dram_init':
versatile.c:98: warning: passing argument 1 of 'get_ram_size' discards
qualifiers from pointer target type
text data bss dec hex filename
116800 2196 14684 133680 20a30 ./u-boot
--------------------- SUMMARY ----------------------------
Boards compiled: 3
Boards with warnings or errors: 3 ( versatileqemu versatilepb versatileab )
----------------------------------------------------------
uboot at lilith:~/src/u-boot-arm$
> Best regards,
> Stefano Babic
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 35+ messages in thread* [U-Boot] [PATCH v2 09/16] ARM: remove broken "versatile" boards.
2011-08-30 6:47 ` Albert ARIBAUD
@ 2011-08-30 7:16 ` Stefano Babic
2011-08-30 8:16 ` Albert ARIBAUD
0 siblings, 1 reply; 35+ messages in thread
From: Stefano Babic @ 2011-08-30 7:16 UTC (permalink / raw)
To: u-boot
On 08/30/2011 08:47 AM, Albert ARIBAUD wrote:
> Hi Stefano,
Hi Albert,
> Building all versatile boards here with ELDK4.2 on a Natty Ubuntu, I get
> warnings of two sorts:
>
> 1) in the QEMU build, you needlessly cast a pointer as 'volatile',
This is wrong...
> which
> I missed on review but which my compiler does not like -- I did a
> general removal patch for code in U-Boot that calls get_ram_size() with
> a volatile-cast argument.
I saw the same issue rebuilding all IMX board for the scb9328 - because
this was the only board with this warning I found, I sent a patch for it
and I have already applied to u-boot-imx. I sent to you a "pull
request", but let me know if you prefer I drop my patch from u-boot-imx
before you merge into u-boot-arm.
>
> 2) There are a lot of redefinitions, apparently a double include.
>
> Can you look into this?
>
> uboot at lilith:~/src/u-boot-arm$ ./MAKEALL versatileqemu versatilepb
> versatileab
Ok, that is clear. I tested only with qemu, because I have not the real
board.
> Configuring for versatileqemu - Board: versatile, Options:
> ARCH_VERSATILE_QEMU
> versatile.c: In function 'dram_init':
> versatile.c:98: warning: passing argument 1 of 'get_ram_size' discards
> qualifiers from pointer target type
> text data bss dec hex filename
> 100896 2140 12020 115056 1c170 ./u-boot
> Configuring for versatilepb - Board: versatile, Options: ARCH_VERSATILE_PB
Yes, it is redefined. I will send the patch, I will test the board
running in the qemu environment.
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 35+ messages in thread
* [U-Boot] [PATCH v2 09/16] ARM: remove broken "versatile" boards.
2011-08-30 7:16 ` Stefano Babic
@ 2011-08-30 8:16 ` Albert ARIBAUD
2011-08-30 8:24 ` Albert ARIBAUD
0 siblings, 1 reply; 35+ messages in thread
From: Albert ARIBAUD @ 2011-08-30 8:16 UTC (permalink / raw)
To: u-boot
Le 30/08/2011 09:16, Stefano Babic a ?crit :
> On 08/30/2011 08:47 AM, Albert ARIBAUD wrote:
>> Hi Stefano,
>
> Hi Albert,
>
>> Building all versatile boards here with ELDK4.2 on a Natty Ubuntu, I get
>> warnings of two sorts:
>>
>> 1) in the QEMU build, you needlessly cast a pointer as 'volatile',
>
> This is wrong...
>
>> which
>> I missed on review but which my compiler does not like -- I did a
>> general removal patch for code in U-Boot that calls get_ram_size() with
>> a volatile-cast argument.
>
> I saw the same issue rebuilding all IMX board for the scb9328 - because
> this was the only board with this warning I found, I sent a patch for it
> and I have already applied to u-boot-imx. I sent to you a "pull
> request", but let me know if you prefer I drop my patch from u-boot-imx
> before you merge into u-boot-arm.
I'll pick it with the IMX pull req, and I will apply Wolfgang's patch
set afterward, minus versatile if the board is completely fixed.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 35+ messages in thread
* [U-Boot] [PATCH v2 09/16] ARM: remove broken "versatile" boards.
2011-08-30 8:16 ` Albert ARIBAUD
@ 2011-08-30 8:24 ` Albert ARIBAUD
0 siblings, 0 replies; 35+ messages in thread
From: Albert ARIBAUD @ 2011-08-30 8:24 UTC (permalink / raw)
To: u-boot
Stefano,
Le 30/08/2011 10:16, Albert ARIBAUD a ?crit :
> Le 30/08/2011 09:16, Stefano Babic a ?crit :
>
>> On 08/30/2011 08:47 AM, Albert ARIBAUD wrote:
>>> Hi Stefano,
>>
>> Hi Albert,
>>
>>> Building all versatile boards here with ELDK4.2 on a Natty Ubuntu, I get
>>> warnings of two sorts:
>>>
>>> 1) in the QEMU build, you needlessly cast a pointer as 'volatile',
>>
>> This is wrong...
>>
>>> which
>>> I missed on review but which my compiler does not like -- I did a
>>> general removal patch for code in U-Boot that calls get_ram_size() with
>>> a volatile-cast argument.
>>
>> I saw the same issue rebuilding all IMX board for the scb9328 - because
>> this was the only board with this warning I found, I sent a patch for it
>> and I have already applied to u-boot-imx. I sent to you a "pull
>> request", but let me know if you prefer I drop my patch from u-boot-imx
>> before you merge into u-boot-arm.
>
> I'll pick it with the IMX pull req, and I will apply Wolfgang's patch
> set afterward, minus versatile if the board is completely fixed.
Sorry, I realize there might have been a misunderstanding. The global
fix patch I did was applied some time ago and any spurious volatile left
must be fixed by new patches, so your patch is welcome anyway.
Note that you also need to provide a fix for versatile.c.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 35+ messages in thread
* [U-Boot] [PATCH v2 10/16] ARM: remove broken "voiceblue" board
2011-08-26 12:25 ` [U-Boot] [PATCH v2 00/16] " Wolfgang Denk
` (8 preceding siblings ...)
2011-08-26 12:25 ` [U-Boot] [PATCH v2 09/16] ARM: remove broken "versatile" boards Wolfgang Denk
@ 2011-08-26 12:25 ` Wolfgang Denk
2011-08-26 12:25 ` [U-Boot] [PATCH v2 11/16] ARM: remove broken "at91cap9adk" board Wolfgang Denk
` (5 subsequent siblings)
15 siblings, 0 replies; 35+ messages in thread
From: Wolfgang Denk @ 2011-08-26 12:25 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
MAKEALL | 1 -
board/voiceblue/Makefile | 74 -----------
board/voiceblue/config.mk | 1 -
board/voiceblue/eeprom.c | 218 ---------------------------------
board/voiceblue/setup.S | 280 -------------------------------------------
board/voiceblue/voiceblue.c | 80 ------------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/voiceblue.h | 241 -------------------------------------
9 files changed, 1 insertions(+), 896 deletions(-)
delete mode 100644 board/voiceblue/Makefile
delete mode 100644 board/voiceblue/config.mk
delete mode 100644 board/voiceblue/eeprom.c
delete mode 100644 board/voiceblue/setup.S
delete mode 100644 board/voiceblue/voiceblue.c
delete mode 100644 include/configs/voiceblue.h
diff --git a/MAKEALL b/MAKEALL
index d6d04b7..b230ff1 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -346,7 +346,6 @@ LIST_ARM9=" \
spear320 \
spear600 \
VCMA9 \
- voiceblue \
davinci_dvevm \
davinci_schmoogie \
davinci_sffsdr \
diff --git a/board/voiceblue/Makefile b/board/voiceblue/Makefile
deleted file mode 100644
index e16b195..0000000
--- a/board/voiceblue/Makefile
+++ /dev/null
@@ -1,74 +0,0 @@
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de
-#
-# (C) Copyright 2005
-# Ladislav Michl, 2N Telekomunikace, michl at 2n.cz
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := voiceblue.o
-SOBJS := setup.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-LOAD_ADDR = 0x10400000
-
-#########################################################################
-
-all: $(obj).depend $(LIB) $(obj)eeprom.srec $(obj)eeprom.bin
-
-$(LIB): $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $^)
-
-$(obj)eeprom_start.o:
- echo "b eeprom" | $(CC) $(AFLAGS) -c -x assembler -o $@ -
-
-$(obj)eeprom: $(obj)eeprom_start.o $(obj)eeprom.o
- $(LD) -Ttext $(LOAD_ADDR) -e eeprom -o $@ $^ \
- -L$(obj)../../examples/standalone -lstubs \
- $(PLATFORM_LIBS)
-
-$(obj)eeprom.srec: $(obj)eeprom
- $(OBJCOPY) -S -O srec $(<:.o=) $@
-
-$(obj)eeprom.bin: $(obj)eeprom
- $(OBJCOPY) -S -O binary $< $@
-
-clean:
- rm -f $(SOBJS) $(OBJS) $(obj)eeprom \
- $(obj)eeprom.srec $(obj)eeprom.bin \
- $(obj)eeprom.o $(obj)eeprom_start.o
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/voiceblue/config.mk b/board/voiceblue/config.mk
deleted file mode 100644
index 412b57d..0000000
--- a/board/voiceblue/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x13FD0000
diff --git a/board/voiceblue/eeprom.c b/board/voiceblue/eeprom.c
deleted file mode 100644
index aa6baca..0000000
--- a/board/voiceblue/eeprom.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * (C) Copyright 2005
- * Ladislav Michl, 2N Telekomunikace, michl@2n.cz
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Some code shamelessly stolen back from Robin Getz.
- */
-
-#include <common.h>
-#include <exports.h>
-#include <timestamp.h>
-#include <net.h>
-#include "../drivers/net/smc91111.h"
-
-static struct eth_device dev = {
- .iobase = CONFIG_SMC91111_BASE
-};
-
-static u16 read_eeprom_reg(u16 reg)
-{
- int timeout;
-
- SMC_SELECT_BANK(&dev, 2);
- SMC_outw(&dev, reg, PTR_REG);
-
- SMC_SELECT_BANK(&dev, 1);
- SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT |
- CTL_RELOAD, CTL_REG);
-
- timeout = 100;
-
- while ((SMC_inw(&dev, CTL_REG) & CTL_RELOAD) && --timeout)
- udelay(100);
- if (timeout == 0) {
- printf("Timeout reading register %02x\n", reg);
- return 0;
- }
-
- return SMC_inw(&dev, GP_REG);
-}
-
-static int write_eeprom_reg(u16 value, u16 reg)
-{
- int timeout;
-
- SMC_SELECT_BANK(&dev, 2);
- SMC_outw(&dev, reg, PTR_REG);
-
- SMC_SELECT_BANK(&dev, 1);
-
- SMC_outw(&dev, value, GP_REG);
- SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT |
- CTL_STORE, CTL_REG);
-
- timeout = 100;
-
- while ((SMC_inw(&dev, CTL_REG) & CTL_STORE) && --timeout)
- udelay(100);
- if (timeout == 0) {
- printf("Timeout writing register %02x\n", reg);
- return 0;
- }
-
- return 1;
-}
-
-static int write_data(u16 *buf, int len)
-{
- u16 reg = 0x23;
-
- while (len--)
- write_eeprom_reg(*buf++, reg++);
-
- return 0;
-}
-
-static int verify_macaddr(char *s)
-{
- u16 reg;
- int i, err = 0;
-
- puts("HWaddr: ");
- for (i = 0; i < 3; i++) {
- reg = read_eeprom_reg(0x20 + i);
- printf("%02x:%02x%c", reg & 0xff, reg >> 8, i != 2 ? ':' : '\n');
- if (s)
- err |= reg != ((u16 *)s)[i];
- }
-
- return err ? 0 : 1;
-}
-
-static int set_mac(char *s)
-{
- int i;
- char *e, eaddr[6];
-
- /* turn string into mac value */
- for (i = 0; i < 6; i++) {
- eaddr[i] = simple_strtoul(s, &e, 16);
- s = (*e) ? e+1 : e;
- }
-
- for (i = 0; i < 3; i++)
- write_eeprom_reg(*(((u16 *)eaddr) + i), 0x20 + i);
-
- return 0;
-}
-
-static int parse_element(char *s, unsigned char *buf, int len)
-{
- int cnt;
- char *p, num[3];
- unsigned char id;
-
- id = simple_strtoul(s, &p, 16);
- if (*p++ != ':')
- return -1;
- cnt = 2;
- num[2] = 0;
- for (; *p; p += 2) {
- if (p[1] == 0)
- return -2;
- if (cnt + 3 > len)
- return -3;
- num[0] = p[0];
- num[1] = p[1];
- buf[cnt++] = simple_strtoul(num, NULL, 16);
- }
- buf[0] = id;
- buf[1] = cnt - 2;
-
- return cnt;
-}
-
-int eeprom(int argc, char * const argv[])
-{
- int i, len, ret;
- unsigned char buf[58], *p;
-
- app_startup(argv);
- i = get_version();
- if (i != XF_VERSION) {
- printf("Using ABI version %d, but U-Boot provides %d\n",
- XF_VERSION, i);
- return 1;
- }
-
- if ((SMC_inw(&dev, BANK_SELECT) & 0xFF00) != 0x3300) {
- puts("SMSC91111 not found\n");
- return 2;
- }
-
- /* Called without parameters - print MAC address */
- if (argc < 2) {
- verify_macaddr(NULL);
- return 0;
- }
-
- /* Print help message */
- if (argv[1][1] == 'h') {
- puts("VoiceBlue EEPROM writer\n"
- "Built: " U_BOOT_DATE "@" U_BOOT_TIME "\n"
- "Usage:\n\t<mac_address> [<element_1>] [<...>]\n");
- return 0;
- }
-
- /* Try to parse information elements */
- len = sizeof(buf);
- p = buf;
- for (i = 2; i < argc; i++) {
- ret = parse_element(argv[i], p, len);
- switch (ret) {
- case -1:
- printf("Element %d: malformed\n", i - 1);
- return 3;
- case -2:
- printf("Element %d: odd character count\n", i - 1);
- return 3;
- case -3:
- puts("Out of EEPROM memory\n");
- return 3;
- default:
- p += ret;
- len -= ret;
- }
- }
-
- /* First argument (MAC) is mandatory */
- set_mac(argv[1]);
- if (verify_macaddr(argv[1])) {
- puts("*** HWaddr does not match! ***\n");
- return 4;
- }
-
- while (len--)
- *p++ = 0;
-
- write_data((u16 *)buf, sizeof(buf) >> 1);
-
- return 0;
-}
diff --git a/board/voiceblue/setup.S b/board/voiceblue/setup.S
deleted file mode 100644
index 6dddd6b..0000000
--- a/board/voiceblue/setup.S
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2004 Ales Jindra <jindra@2n.cz>
- * (C) Copyright 2005 Ladislav Michl <michl@2n.cz>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE /* SDRAM load addr from config.mk */
-
-OMAP5910_LPG1_BASE: .word 0xfffbd000
-OMAP5910_TIPB_SWITCHES_BASE: .word 0xfffbc800
-OMAP5910_MPU_TC_BASE: .word 0xfffecc00
-OMAP5910_MPU_CLKM_BASE: .word 0xfffece00
-OMAP5910_ULPD_PWR_MNG_BASE: .word 0xfffe0800
-OMAP5910_DPLL1_BASE: .word 0xfffecf00
-OMAP5910_GPIO_BASE: .word 0xfffce000
-OMAP5910_MPU_WD_TIMER_BASE: .word 0xfffec800
-OMAP5910_MPUI_BASE: .word 0xfffec900
-
-_OMAP5910_ARM_CKCTL: .word OMAP5910_ARM_CKCTL
-_OMAP5910_ARM_EN_CLK: .word OMAP5910_ARM_EN_CLK
-
-OMAP5910_MPUI_CTRL: .word 0x0000ff1b
-
-VAL_EMIFS_CS0_CONFIG: .word 0x00009090
-VAL_EMIFS_CS1_CONFIG: .word 0x00003031
-VAL_EMIFS_CS2_CONFIG: .word 0x00003031
-VAL_EMIFS_CS3_CONFIG: .word 0x0000c0c0
-VAL_EMIFS_DYN_WAIT: .word 0x00000000
-/* autorefresh counter 0x246 ((64000000/13.4)-400)/8192) */
- /* SLRF SD_RET ARE SDRAM_TYPE ARCV SDRAM_FREQUENCY PWD CLK */
-VAL_EMIFF_SDRAM_CONFIG: .word ((0 << 0) | (0 << 1) | (3 << 2) | (0xd << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27))
-VAL_EMIFF_SDRAM_CONFIG2: .word 0x00000003
-VAL_EMIFF_MRS: .word 0x00000037
-
-/*
- * GPIO04 - D4 (Onboard LED)
- * GPIO07 - LAN91C111 reset
- */
-GPIO_DIRECTION:
- .word 0x0000ff6f
-/*
- * Disable everything, but D4 LED (connected through invertor)
- */
-GPIO_OUTPUT:
- .word 0x00000010
-
-MUX_CONFIG_BASE:
- .word 0xfffe1000
-
-MUX_CONFIG_VALUES:
- .align 4
- .word 0x00000000 @ FUNC_MUX_CTRL_0
- .word 0x00000000 @ FUNC_MUX_CTRL_1
- .word 0x00000000 @ FUNC_MUX_CTRL_2
- .word 0x00000000 @ FUNC_MUX_CTRL_3
- .word 0x00000000 @ FUNC_MUX_CTRL_4
- .word 0x12082480 @ FUNC_MUX_CTRL_5
- .word 0x0000001c @ FUNC_MUX_CTRL_6
- .word 0x00000003 @ FUNC_MUX_CTRL_7
- .word 0x10001200 @ FUNC_MUX_CTRL_8
- .word 0x01201012 @ FUNC_MUX_CTRL_9
- .word 0x02081248 @ FUNC_MUX_CTRL_A
- .word 0x00001248 @ FUNC_MUX_CTRL_B
- .word 0x12240000 @ FUNC_MUX_CTRL_C
- .word 0x00002000 @ FUNC_MUX_CTRL_D
- .word 0x00000000 @ PULL_DWN_CTRL_0
- .word 0x0000085f @ PULL_DWN_CTRL_1
- .word 0x01001000 @ PULL_DWN_CTRL_2
- .word 0x00000000 @ PULL_DWN_CTRL_3
- .word 0x00000000 @ GATE_INH_CTRL_0
- .word 0x00000000 @ VOLTAGE_CTRL_0
- .word 0x00000000 @ TEST_DBG_CTRL_0
- .word 0x00000006 @ MOD_CONF_CTRL_0
- .word 0x0000eaef @ COMP_MODE_CTRL_0
-
-MUX_CONFIG_OFFSETS:
- .align 1
- .byte 0x00 @ FUNC_MUX_CTRL_0
- .byte 0x04 @ FUNC_MUX_CTRL_1
- .byte 0x08 @ FUNC_MUX_CTRL_2
- .byte 0x10 @ FUNC_MUX_CTRL_3
- .byte 0x14 @ FUNC_MUX_CTRL_4
- .byte 0x18 @ FUNC_MUX_CTRL_5
- .byte 0x1c @ FUNC_MUX_CTRL_6
- .byte 0x20 @ FUNC_MUX_CTRL_7
- .byte 0x24 @ FUNC_MUX_CTRL_8
- .byte 0x28 @ FUNC_MUX_CTRL_9
- .byte 0x2c @ FUNC_MUX_CTRL_A
- .byte 0x30 @ FUNC_MUX_CTRL_B
- .byte 0x34 @ FUNC_MUX_CTRL_C
- .byte 0x38 @ FUNC_MUX_CTRL_D
- .byte 0x40 @ PULL_DWN_CTRL_0
- .byte 0x44 @ PULL_DWN_CTRL_1
- .byte 0x48 @ PULL_DWN_CTRL_2
- .byte 0x4c @ PULL_DWN_CTRL_3
- .byte 0x50 @ GATE_INH_CTRL_0
- .byte 0x60 @ VOLTAGE_CTRL_0
- .byte 0x70 @ TEST_DBG_CTRL_0
- .byte 0x80 @ MOD_CONF_CTRL_0
- .byte 0x0c @ COMP_MODE_CTRL_0
- .byte 0xff
-
-.globl lowlevel_init
-lowlevel_init:
- /* Improve performance a bit... */
- mrc p15, 0, r1, c0, c0, 0 @ read C15 ID register
- mrc p15, 0, r1, c0, c0, 1 @ read C15 Cache information register
- mrc p15, 0, r1, c1, c0, 0 @ read C15 Control register
- orr r1, r1, #0x1000 @ enable I-cache, map interrupt vector 0xffff0000
- mcr p15, 0, r1, c1, c0, 0 @ write C15 Control register
- mov r1, #0x00
- mcr p15, 0, r1, c7, c5, 0 @ Flush I-cache
- nop
- nop
- nop
- nop
-
- /* Setup clocking mode */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ prepare base of CLOCK unit
- ldrh r1, [r0, #0x18] @ get reset status
- bic r1, r1, #(7 << 11) @ clear clock select
- orr r1, r1, #(2 << 11) @ set synchronous scalable
- mov r2, #0 @ set wait counter to 100 clock cycles
-
-icache_loop:
- cmp r2, #0x01
- streqh r1, [r0, #0x18]
- add r2, r2, #0x01
- cmp r2, #0x10
- bne icache_loop
- nop
-
- /* Setup clock divisors */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit
- ldr r1, _OMAP5910_ARM_CKCTL
- orr r1, r1, #0x2000 @ enable DSP clock
- strh r1, [r0, #0x00] @ setup clock divisors
-
- /* Setup DPLL to generate requested freq */
- ldr r0, OMAP5910_DPLL1_BASE @ base of DPLL1 register
- mov r1, #0x0010 @ set PLL_ENABLE
- orr r1, r1, #0x2000 @ set IOB to new locking
- orr r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF
- orr r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF
- strh r1, [r0] @ write
-
-locking:
- ldrh r1, [r0] @ get DPLL value
- tst r1, #0x01
- beq locking @ while LOCK not set
-
- /* Enable clock */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit
- mov r1, #(1 << 10) @ disable idle mode do not check
- @ nWAKEUP pin, other remain active
- strh r1, [r0, #0x04]
- ldr r1, _OMAP5910_ARM_EN_CLK
- strh r1, [r0, #0x08]
- mov r1, #0x003f @ FLASH.RP not enabled in idle and
- @ max delayed ( 32 x CLKIN )
- strh r1, [r0, #0x0c]
-
- /* Configure 5910 pins functions to match our board. */
- ldr r0, MUX_CONFIG_BASE
- adr r1, MUX_CONFIG_VALUES
- adr r2, MUX_CONFIG_OFFSETS
-next_mux_cfg:
- ldrb r3, [r2], #1
- ldr r4, [r1], #4
- cmp r3, #0xff
- strne r4, [r0, r3]
- bne next_mux_cfg
-
- /* Configure GPIO pins (also enables onboard LED) */
- ldr r0, OMAP5910_GPIO_BASE
- ldr r1, GPIO_OUTPUT
- strh r1, [r0, #0x04]
- ldr r1, GPIO_DIRECTION
- strh r1, [r0, #0x08]
-
- /* EnablePeripherals */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ CLOCK unit
- mov r1, #0x0001 @ Peripheral enable
- strh r1, [r0, #0x14]
-
- /* Program LED Pulse Generator */
- ldr r0, OMAP5910_LPG1_BASE @ 1st LED Pulse Generator
- mov r1, #0x7F @ Set obscure frequency in
- strb r1, [r0, #0x00] @ LCR
- mov r1, #0x01 @ Enable clock (CLK_EN) in
- strb r1, [r0, #0x04] @ PMR
-
- /* TIPB Lock UART1 */
- ldr r0, OMAP5910_TIPB_SWITCHES_BASE @ prepare base of TIPB switches
- mov r1, #1 @ ARM allocated
- strh r1, [r0,#0x04] @ clear IRQ line and status bits
- strh r1, [r0,#0x00]
- ldrh r1, [r0,#0x04]
-
- /* Disable watchdog */
- ldr r0, OMAP5910_MPU_WD_TIMER_BASE
- mov r1, #0xf5
- strh r1, [r0, #0x8]
- mov r1, #0xa0
- strh r1, [r0, #0x8]
-
- /* Enable MCLK */
- ldr r0, OMAP5910_ULPD_PWR_MNG_BASE
- mov r1, #0x6
- strh r1, [r0, #0x34]
- strh r1, [r0, #0x34]
-
- /* Setup clock divisors */
- ldr r0, OMAP5910_ULPD_PWR_MNG_BASE @ base of ULDPL DPLL1 register
-
- mov r1, #0x0010 @ set PLL_ENABLE
- orr r1, r1, #0x2000 @ set IOB to new locking
- strh r1, [r0] @ write
-
-ulocking:
- ldrh r1, [r0] @ get DPLL value
- tst r1, #1
- beq ulocking @ while LOCK not set
-
- /* EMIF init */
- ldr r0, OMAP5910_MPU_TC_BASE
- ldrh r1, [r0, #0x0c] @ EMIFS_CONFIG_REG
- bic r1, r1, #0x0c @ pwr down disabled, flash WP
- orr r1, r1, #0x01
- str r1, [r0, #0x0c]
-
- ldr r1, VAL_EMIFS_CS0_CONFIG
- str r1, [r0, #0x10] @ EMIFS_CS0_CONFIG
- ldr r1, VAL_EMIFS_CS1_CONFIG
- str r1, [r0, #0x14] @ EMIFS_CS1_CONFIG
- ldr r1, VAL_EMIFS_CS2_CONFIG
- str r1, [r0, #0x18] @ EMIFS_CS2_CONFIG
- ldr r1, VAL_EMIFS_CS3_CONFIG
- str r1, [r0, #0x1c] @ EMIFS_CS3_CONFIG
- ldr r1, VAL_EMIFS_DYN_WAIT
- str r1, [r0, #0x40] @ EMIFS_CFG_DYN_WAIT
-
- /* Setup SDRAM */
- ldr r1, VAL_EMIFF_SDRAM_CONFIG
- str r1, [r0, #0x20] @ EMIFF_SDRAM_CONFIG
- ldr r1, VAL_EMIFF_SDRAM_CONFIG2
- str r1, [r0, #0x3c] @ EMIFF_SDRAM_CONFIG2
- ldr r1, VAL_EMIFF_MRS
- str r1, [r0, #0x24] @ EMIFF_MRS
- /* SDRAM needs 100us to stabilize */
- mov r0, #0x4000
-sdelay:
- subs r0, r0, #0x1
- bne sdelay
-
- /* back to arch calling code */
- mov pc, lr
-.end
diff --git a/board/voiceblue/voiceblue.c b/board/voiceblue/voiceblue.c
deleted file mode 100644
index 5f8af2b..0000000
--- a/board/voiceblue/voiceblue.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
- *((volatile unsigned char *) VOICEBLUE_LED_REG) = 0xaa;
-
- /* arch number of VoiceBlue board */
- gd->bd->bi_arch_number = MACH_TYPE_VOICEBLUE;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x10000100;
-
- return 0;
-}
-
-int dram_init(void)
-{
- *((volatile unsigned short *) VOICEBLUE_LED_REG) = 0xff;
-
- /* Take the Ethernet controller out of reset and wait
- * for the EEPROM load to complete. */
- *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) |= 0x80;
- udelay(10); /* doesn't work before timer_init call */
- *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) &= ~0x80;
- udelay(500);
-
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
-
-int misc_init_r(void)
-{
- *((volatile unsigned short *) VOICEBLUE_LED_REG) = 0x55;
-
- return 0;
-}
-
-int board_late_init(void)
-{
- *((volatile unsigned char *) VOICEBLUE_LED_REG) = 0x00;
-
- return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC91111
- rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/boards.cfg b/boards.cfg
index f70afe2..b4d82db 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -68,7 +68,6 @@ cm4008 arm arm920t - -
cm41xx arm arm920t - - ks8695
VCMA9 arm arm920t vcma9 mpl s3c24x0
smdk2410 arm arm920t - samsung s3c24x0
-voiceblue arm arm925t
omap1510inn arm arm925t - ti
integratorap_cm926ejs arm arm926ejs integrator armltd - integratorap
integratorcp_cm926ejs arm arm926ejs integrator armltd - integratorcp
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 087e0e1..144edaa 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+voiceblue arm arm925t - 2011-07-17
versatile arm ARM926EJS - 2011-07-17 Peter Pearse <peter.pearse@arm.com>
smdk2400 arm arm920t - 2011-07-17 Gary Jennejohn <garyj@denx.de>
sbc2410x arm arm920t - 2011-07-17
diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h
deleted file mode 100644
index c258030..0000000
--- a/include/configs/voiceblue.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
- *
- * Configuation settings for the TI OMAP VoiceBlue board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <configs/omap1510.h>
-
-#define CONFIG_ARM925T 1 /* This is an arm925t CPU */
-#define CONFIG_OMAP 1 /* in a TI OMAP core */
-#define CONFIG_OMAP1510 1 /* which is in a 5910 */
-
-/* Input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz */
-#define CONFIG_XTAL_FREQ 12000000 /* 12MHz */
-
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_MISC_INIT_R /* There is nothing to really init */
-#define BOARD_LATE_INIT /* but we flash the LEDs here */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x10000000
-#define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024)
-#define PHYS_FLASH_1 0x0000000
-
-#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_SIZE (8 * 1024)
-#define CONFIG_ENV_SECT_SIZE (64 * 1024)
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Size of malloc() pool and stack
- */
-#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
-#define CONFIG_STACKSIZE (1 * 1024 * 1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK (CONFIG_XTAL_FREQ)
-#define CONFIG_SYS_NS16550_COM1 OMAP1510_UART1_BASE
-
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE 0x08000300
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 512
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP1510_I2C
-
-#define CONFIG_RTC_DS1307
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-
-/*
- * Command line configuration
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-#define CONFIG_LOOPW
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */
-#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
-#define CONFIG_SYS_AUTOLOAD "n"
-#define CONFIG_BOOTCOMMAND "run nboot"
-#define CONFIG_PREBOOT "run setup"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "silent=1\0" \
- "ospart=0\0" \
- "bootfile=/boot/uImage\0" \
- "setpart=" \
- "if test -n $swapos; then " \
- "setenv swapos; saveenv; " \
- "if test $ospart -eq 0; then " \
- "setenv ospart 1; " \
- "else " \
- "setenv ospart 0; " \
- "fi; " \
- "fi\0" \
- "setup=setenv bootargs console=ttyS0,$baudrate " \
- "mtdparts=$mtdparts\0" \
- "nfsargs=setenv bootargs $bootargs " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
- "nfsroot=$rootpath root=/dev/nfs\0" \
- "flashargs=run setpart; setenv bootargs $bootargs " \
- "root=mtd:data$ospart ro " \
- "rootfstype=jffs2\0" \
- "initrdargs=setenv bootargs $bootargs " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
- "fboot=run flashargs; chpart data$ospart; fsload; bootm\0" \
- "mboot=bootp; run initrdargs; tftp; bootm\0" \
- "nboot=bootp; run nfsargs; tftp; bootm\0"
-
-#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
-
-#if 1 /* feel free to disable for development */
-#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
-#define CONFIG_AUTOBOOT_PROMPT "\nVoiceBlue Enterprise - booting...\n"
-#define CONFIG_AUTOBOOT_DELAY_STR "." /* 1st "password" */
-#endif
-
-/*
- * Partitions (mtdparts command line support)
- */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
-#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \
- "256k(u-boot),64k(env),64k(r_env),16192k(data0),-(data1)"
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT "# "
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1)
-#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \
- (CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE))
-#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x400000)
-
-/*
- * The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
- * This time is further subdivided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE
-#define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */
-#define CONFIG_SYS_HZ 1000
-
-#define OMAP5910_DPLL_DIV 1
-#define OMAP5910_DPLL_MUL \
- ((CONFIG_SYS_CLK_FREQ * (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)
-
-#define OMAP5910_ARM_PER_DIV 2 /* CKL/4 */
-#define OMAP5910_LCD_DIV 2 /* CKL/4 */
-#define OMAP5910_ARM_DIV 0 /* CKL/1 */
-#define OMAP5910_DSP_DIV 0 /* CKL/1 */
-#define OMAP5910_TC_DIV 1 /* CKL/2 */
-#define OMAP5910_DSP_MMU_DIV 1 /* CKL/2 */
-#define OMAP5910_ARM_TIM_SEL 1 /* CKL used for MPU timers */
-
-#define OMAP5910_ARM_EN_CLK 0x03d6 /* 0000 0011 1101 0110b Clock Enable */
-#define OMAP5910_ARM_CKCTL ((OMAP5910_ARM_PER_DIV) | \
- (OMAP5910_LCD_DIV << 2) | \
- (OMAP5910_ARM_DIV << 4) | \
- (OMAP5910_DSP_DIV << 6) | \
- (OMAP5910_TC_DIV << 8) | \
- (OMAP5910_DSP_MMU_DIV << 10) | \
- (OMAP5910_ARM_TIM_SEL << 12))
-
-#define VOICEBLUE_LED_REG 0x04030000
-
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 35+ messages in thread* [U-Boot] [PATCH v2 11/16] ARM: remove broken "at91cap9adk" board
2011-08-26 12:25 ` [U-Boot] [PATCH v2 00/16] " Wolfgang Denk
` (9 preceding siblings ...)
2011-08-26 12:25 ` [U-Boot] [PATCH v2 10/16] ARM: remove broken "voiceblue" board Wolfgang Denk
@ 2011-08-26 12:25 ` Wolfgang Denk
2011-08-26 12:25 ` [U-Boot] [PATCH v2 12/16] ARM: remove broken "cmc_pu2" board Wolfgang Denk
` (4 subsequent siblings)
15 siblings, 0 replies; 35+ messages in thread
From: Wolfgang Denk @ 2011-08-26 12:25 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stelian Pop <stelian.pop@leadtechdesign.com>
---
MAINTAINERS | 1 -
board/atmel/at91cap9adk/Makefile | 56 ------
board/atmel/at91cap9adk/at91cap9adk.c | 352 ---------------------------------
board/atmel/at91cap9adk/config.mk | 1 -
board/atmel/at91cap9adk/led.c | 43 ----
board/atmel/at91cap9adk/partition.c | 39 ----
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/at91cap9adk.h | 218 --------------------
9 files changed, 1 insertions(+), 711 deletions(-)
delete mode 100644 board/atmel/at91cap9adk/Makefile
delete mode 100644 board/atmel/at91cap9adk/at91cap9adk.c
delete mode 100644 board/atmel/at91cap9adk/config.mk
delete mode 100644 board/atmel/at91cap9adk/led.c
delete mode 100644 board/atmel/at91cap9adk/partition.c
delete mode 100644 include/configs/at91cap9adk.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 4de0231..d57ed58 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -783,7 +783,6 @@ Manikandan Pillai <mani.pillai@ti.com>
Stelian Pop <stelian.pop@leadtechdesign.com>
- at91cap9adk ARM926EJS (AT91CAP9 SoC)
at91sam9260ek ARM926EJS (AT91SAM9260 SoC)
at91sam9261ek ARM926EJS (AT91SAM9261 SoC)
at91sam9263ek ARM926EJS (AT91SAM9263 SoC)
diff --git a/board/atmel/at91cap9adk/Makefile b/board/atmel/at91cap9adk/Makefile
deleted file mode 100644
index 2eec0ce..0000000
--- a/board/atmel/at91cap9adk/Makefile
+++ /dev/null
@@ -1,56 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian.pop@leadtechdesign.com>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS-y += at91cap9adk.o
-COBJS-y += led.o
-COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS-y))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c
deleted file mode 100644
index 2ab8bc2..0000000
--- a/board/atmel/at91cap9adk/at91cap9adk.c
+++ /dev/null
@@ -1,352 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91cap9.h>
-#include <asm/arch/at91cap9_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
-#include <lcd.h>
-#include <atmel_lcdc.h>
-#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
-#include <net.h>
-#endif
-#include <netdev.h>
-
-#define MP_BLOCK_3_BASE 0xFDF00000
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-static void at91cap9_slowclock_hw_init(void)
-{
- /*
- * On AT91CAP9 revC CPUs, the slow clock can be based on an
- * internal impreciseRC oscillator or an external 32kHz oscillator.
- * Switch to the latter.
- */
-#define ARCH_ID_AT91CAP9_REVB 0x399
-#define ARCH_ID_AT91CAP9_REVC 0x601
- if (at91_sys_read(AT91_PMC_VER) == ARCH_ID_AT91CAP9_REVC) {
- unsigned i, tmp = at91_sys_read(AT91_SCKCR);
- if ((tmp & AT91CAP9_SCKCR_OSCSEL) == AT91CAP9_SCKCR_OSCSEL_RC) {
- timer_init();
- tmp |= AT91CAP9_SCKCR_OSC32EN;
- at91_sys_write(AT91_SCKCR, tmp);
- for (i = 0; i < 1200; i++)
- udelay(1000);
- tmp |= AT91CAP9_SCKCR_OSCSEL_32;
- at91_sys_write(AT91_SCKCR, tmp);
- udelay(200);
- tmp &= ~AT91CAP9_SCKCR_RCEN;
- at91_sys_write(AT91_SCKCR, tmp);
- }
- }
-}
-
-static void at91cap9_nor_hw_init(void)
-{
- unsigned long csa;
-
- /* Ensure EBI supply is 3.3V */
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA,
- csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
- /* Configure SMC CS0 for parallel flash */
- at91_sys_write(AT91_SMC_SETUP(0),
- AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2) |
- AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2));
- at91_sys_write(AT91_SMC_PULSE(0),
- AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10) |
- AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10));
- at91_sys_write(AT91_SMC_CYCLE(0),
- AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
- at91_sys_write(AT91_SMC_MODE(0),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE |
- AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
-}
-
-#ifdef CONFIG_CMD_NAND
-static void at91cap9_nand_hw_init(void)
-{
- unsigned long csa;
-
- /* Enable CS3 */
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA,
- csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA |
- AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
-
- /* Configure SMC CS3 for NAND/SmartMedia */
- at91_sys_write(AT91_SMC_SETUP(3),
- AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1) |
- AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1));
- at91_sys_write(AT91_SMC_PULSE(3),
- AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6) |
- AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6));
- at91_sys_write(AT91_SMC_CYCLE(3),
- AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8));
- at91_sys_write(AT91_SMC_MODE(3),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CONFIG_SYS_NAND_DBW_16
- AT91_SMC_DBW_16 |
-#else /* CONFIG_SYS_NAND_DBW_8 */
- AT91_SMC_DBW_8 |
-#endif
- AT91_SMC_TDF_(1));
-
- at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD);
-
- /* RDY/BSY is not connected */
-
- /* Enable NandFlash */
- at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-}
-#endif
-
-#ifdef CONFIG_MACB
-static void at91cap9_macb_hw_init(void)
-{
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_EMAC);
-
- /*
- * Disable pull-up on:
- * RXDV (PB22) => PHY normal mode (not Test mode)
- * ERX0 (PB25) => PHY ADDR0
- * ERX1 (PB26) => PHY ADDR1 => PHYADDR = 0x0
- *
- * PHY has internal pull-down
- */
- writel(pin_to_mask(AT91_PIN_PB22) |
- pin_to_mask(AT91_PIN_PB25) |
- pin_to_mask(AT91_PIN_PB26),
- pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
-
- /* Need to reset PHY -> 500ms reset */
- at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
- (AT91_RSTC_ERSTL & (0x0D << 8)) |
- AT91_RSTC_URSTEN);
-
- at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
-
- /* Wait for end hardware reset */
- while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
-
- /* Restore NRST value */
- at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
- (AT91_RSTC_ERSTL & (0x0 << 8)) |
- AT91_RSTC_URSTEN);
-
- /* Re-enable pull-up */
- writel(pin_to_mask(AT91_PIN_PB22) |
- pin_to_mask(AT91_PIN_PB25) |
- pin_to_mask(AT91_PIN_PB26),
- pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
-
- at91_macb_hw_init();
-
- /* Unlock EMAC, 3 0 2 1 sequence */
-#define MP_MAC_KEY0 0x5969cb2a
-#define MP_MAC_KEY1 0xb4a1872e
-#define MP_MAC_KEY2 0x05683fbc
-#define MP_MAC_KEY3 0x3634fba4
-#define UNLOCK_MAC 0x00000008
- writel(MP_MAC_KEY3, MP_BLOCK_3_BASE + 0x3c);
- writel(MP_MAC_KEY0, MP_BLOCK_3_BASE + 0x30);
- writel(MP_MAC_KEY2, MP_BLOCK_3_BASE + 0x38);
- writel(MP_MAC_KEY1, MP_BLOCK_3_BASE + 0x34);
- writel(UNLOCK_MAC, MP_BLOCK_3_BASE + 0x40);
-}
-#endif
-
-#ifdef CONFIG_USB_OHCI_NEW
-static void at91cap9_uhp_hw_init(void)
-{
- /* Unlock USB OHCI, 3 2 0 1 sequence */
-#define MP_OHCI_KEY0 0x896c11ca
-#define MP_OHCI_KEY1 0x68ebca21
-#define MP_OHCI_KEY2 0x4823efbc
-#define MP_OHCI_KEY3 0x8651aae4
-#define UNLOCK_OHCI 0x00000010
- writel(MP_OHCI_KEY3, MP_BLOCK_3_BASE + 0x3c);
- writel(MP_OHCI_KEY2, MP_BLOCK_3_BASE + 0x38);
- writel(MP_OHCI_KEY0, MP_BLOCK_3_BASE + 0x30);
- writel(MP_OHCI_KEY1, MP_BLOCK_3_BASE + 0x34);
- writel(UNLOCK_OHCI, MP_BLOCK_3_BASE + 0x40);
-}
-#endif
-
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
- vl_col: 240,
- vl_row: 320,
- vl_clk: 4965000,
- vl_sync: ATMEL_LCDC_INVLINE_INVERTED |
- ATMEL_LCDC_INVFRAME_INVERTED,
- vl_bpix: 3,
- vl_tft: 1,
- vl_hsync_len: 5,
- vl_left_margin: 1,
- vl_right_margin:33,
- vl_vsync_len: 1,
- vl_upper_margin:1,
- vl_lower_margin:0,
- mmio: AT91CAP9_LCDC_BASE,
-};
-
-void lcd_enable(void)
-{
- at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */
-}
-
-void lcd_disable(void)
-{
- at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */
-}
-
-static void at91cap9_lcd_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
- at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
- at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
- at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
- at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
- at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
- at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
- at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
- at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
- at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
- at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
- at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
- at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */
- at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
- at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
- at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
- at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
- at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
- at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */
- at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
- at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
-
- at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_LCDC);
-
- gd->fb_base = 0;
-}
-
-#ifdef CONFIG_LCD_INFO
-#include <nand.h>
-#include <version.h>
-
-void lcd_show_board_info(void)
-{
- ulong dram_size, nand_size;
- int i;
- char temp[32];
-
- lcd_printf ("%s\n", U_BOOT_VERSION);
- lcd_printf ("(C) 2008 ATMEL Corp\n");
- lcd_printf ("at91support at atmel.com\n");
- lcd_printf ("%s CPU at %s MHz\n",
- CONFIG_SYS_AT91_CPU_NAME,
- strmhz(temp, get_cpu_clk_rate()));
-
- dram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
- dram_size += gd->bd->bi_dram[i].size;
- nand_size = 0;
- for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
- nand_size += nand_info[i].size;
- lcd_printf (" %ld MB SDRAM, %ld MB NAND\n",
- dram_size >> 20,
- nand_size >> 20 );
-}
-#endif /* CONFIG_LCD_INFO */
-#endif
-
-int board_init(void)
-{
- /* Enable Ctrlc */
- console_init_f();
-
- /* arch number of AT91CAP9ADK-Board */
- gd->bd->bi_arch_number = MACH_TYPE_AT91CAP9ADK;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- at91_serial_hw_init();
- at91cap9_slowclock_hw_init();
- at91cap9_nor_hw_init();
-#ifdef CONFIG_CMD_NAND
- at91cap9_nand_hw_init();
-#endif
-#ifdef CONFIG_HAS_DATAFLASH
- at91_spi0_hw_init(1 << 0);
-#endif
-#ifdef CONFIG_MACB
- at91cap9_macb_hw_init();
-#endif
-#ifdef CONFIG_USB_OHCI_NEW
- at91cap9_uhp_hw_init();
-#endif
-#ifdef CONFIG_LCD
- at91cap9_lcd_hw_init();
-#endif
- return 0;
-}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-void reset_phy(void)
-{
-}
-#endif
-
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)AT91CAP9_BASE_EMAC, 0x00);
-#endif
- return rc;
-}
diff --git a/board/atmel/at91cap9adk/config.mk b/board/atmel/at91cap9adk/config.mk
deleted file mode 100644
index 797da0e..0000000
--- a/board/atmel/at91cap9adk/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x73000000
diff --git a/board/atmel/at91cap9adk/led.c b/board/atmel/at91cap9adk/led.c
deleted file mode 100644
index 14aea99..0000000
--- a/board/atmel/at91cap9adk/led.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91cap9.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void coloured_LED_init(void)
-{
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD);
-
- at91_set_gpio_output(CONFIG_RED_LED, 1);
- at91_set_gpio_output(CONFIG_GREEN_LED, 1);
- at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
-
- at91_set_gpio_output(CONFIG_RED_LED, 0);
- at91_set_gpio_output(CONFIG_GREEN_LED, 1);
- at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
-}
diff --git a/board/atmel/at91cap9adk/partition.c b/board/atmel/at91cap9adk/partition.c
deleted file mode 100644
index 7e1d46f..0000000
--- a/board/atmel/at91cap9adk/partition.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ulf Samuelsson <ulf@atmel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-#include <common.h>
-#include <config.h>
-#include <asm/hardware.h>
-#include <dataflash.h>
-
-AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-
-struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
- {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
-};
-
-/*define the area offsets*/
-dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
- {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
- {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
- {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
- {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
- {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
-};
diff --git a/boards.cfg b/boards.cfg
index b4d82db..2687bb3 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -77,7 +77,6 @@ versatileab arm arm926ejs versatile armltd
aspenite arm arm926ejs - Marvell armada100
gplugd arm arm926ejs - Marvell armada100
afeb9260 arm arm926ejs - - at91
-at91cap9adk arm arm926ejs - atmel at91
at91sam9260ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_NANDFLASH
at91sam9260ek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_DATAFLASH_CS0
at91sam9260ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_DATAFLASH_CS1
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 144edaa..1c5c5e2 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+at91cap9adk arm arm926ejs - 2011-07-17 Stelian Pop <stelian.pop@leadtechdesign.com>
voiceblue arm arm925t - 2011-07-17
versatile arm ARM926EJS - 2011-07-17 Peter Pearse <peter.pearse@arm.com>
smdk2400 arm arm920t - 2011-07-17 Gary Jennejohn <garyj@denx.de>
diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h
deleted file mode 100644
index 49c923f..0000000
--- a/include/configs/at91cap9adk.h
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * Configuation settings for the AT91CAP9ADK board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
-#define CONFIG_SYS_HZ 1000
-
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
-#define CONFIG_AT91CAP9 1 /* It's an Atmel AT91CAP9 SoC */
-#define CONFIG_AT91CAP9ADK 1 /* on an AT91CAP9ADK Board */
-#define CONFIG_ARCH_CPU_INIT
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * Hardware drivers
- */
-#define CONFIG_AT91_GPIO 1
-#define CONFIG_ATMEL_USART 1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#define CONFIG_USART3 1 /* USART 3 is DBGU */
-
-/* LCD */
-#define CONFIG_LCD 1
-#define LCD_BPP LCD_COLOR8
-#define CONFIG_LCD_LOGO 1
-#undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO 1
-#define CONFIG_LCD_INFO_BELOW_LOGO 1
-#define CONFIG_SYS_WHITE_ON_BLACK 1
-#define CONFIG_ATMEL_LCD 1
-#define CONFIG_ATMEL_LCD_BGR555 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-
-/* LED */
-#define CONFIG_AT91_LED
-#define CONFIG_RED_LED AT91_PIN_PC29 /* this is the power led */
-#define CONFIG_GREEN_LED AT91_PIN_PA10 /* this is the user1 led */
-#define CONFIG_YELLOW_LED AT91_PIN_PA11 /* this is the user1 led */
-
-#define CONFIG_BOOTDELAY 3
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE 1
-#define CONFIG_BOOTP_BOOTPATH 1
-#define CONFIG_BOOTP_GATEWAY 1
-#define CONFIG_BOOTP_HOSTNAME 1
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_SOURCE
-
-#define CONFIG_CMD_PING 1
-#define CONFIG_CMD_DHCP 1
-#define CONFIG_CMD_NAND 1
-#define CONFIG_CMD_USB 1
-
-/* SDRAM: Careful: this supposes an AT91CAP-MEM33 expansion card */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x70000000
-#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
-
-/* DataFlash */
-#define CONFIG_ATMEL_DATAFLASH_SPI
-#define CONFIG_HAS_DATAFLASH 1
-#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
-#define AT91_SPI_CLK 15000000
-#define DATAFLASH_TCSS (0x1a << 16)
-#define DATAFLASH_TCHS (0x1 << 24)
-
-/* NOR flash */
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define PHYS_FLASH_1 0x10000000
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-/* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
-/* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
-
-/* NAND flash */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_DBW_8 1
-
-#endif
-
-/* Ethernet */
-#define CONFIG_MACB 1
-#define CONFIG_RMII 1
-#define CONFIG_NET_MULTI 1
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_RESET_PHY_R 1
-
-/* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
-#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* AT91_BASE_UHP */
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91cap9"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_USB_STORAGE 1
-#define CONFIG_CMD_FAT 1
-
-#define CONFIG_SYS_LOAD_ADDR 0x72000000 /* load address */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END 0x73e00000
-
-#define CONFIG_SYS_USE_DATAFLASH 1
-#undef CONFIG_SYS_USE_NORFLASH
-
-#ifdef CONFIG_SYS_USE_DATAFLASH
-
-/* bootstrap + u-boot + env + linux in dataflash */
-#define CONFIG_ENV_IS_IN_DATAFLASH 1
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
-#define CONFIG_ENV_OFFSET 0x4200
-#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x72000000 0x210000; bootm"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock1 " \
- "mtdparts=physmap-flash.0:-(nor);" \
- "atmel_nand:-(root) " \
- "rw rootfstype=jffs2"
-
-#else
-
-/* bootstrap + u-boot + env + linux in norflash */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_SYS_MONITOR_BASE (PHYS_FLASH_1 + 0x8000)
-#define CONFIG_ENV_OFFSET 0x4000
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x4000
-#define CONFIG_BOOTCOMMAND "cp.b 0x10040000 0x72000000 0x200000; bootm"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock4 " \
- "mtdparts=physmap-flash.0:16k(bootstrap)ro,"\
- "16k(env),224k(uboot)ro,-(linux);" \
- "atmel_nand:-(root) " \
- "rw rootfstype=jffs2"
-
-#endif
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
-
-#define CONFIG_SYS_PROMPT "U-Boot> "
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP 1
-#define CONFIG_CMDLINE_EDITING 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN ROUND(CONFIG_ENV_SIZE + 128*1024, 0x1000)
-
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif
--
1.7.6
^ permalink raw reply related [flat|nested] 35+ messages in thread* [U-Boot] [PATCH v2 12/16] ARM: remove broken "cmc_pu2" board
2011-08-26 12:25 ` [U-Boot] [PATCH v2 00/16] " Wolfgang Denk
` (10 preceding siblings ...)
2011-08-26 12:25 ` [U-Boot] [PATCH v2 11/16] ARM: remove broken "at91cap9adk" board Wolfgang Denk
@ 2011-08-26 12:25 ` Wolfgang Denk
2011-08-26 12:25 ` [U-Boot] [PATCH v2 13/16] ARM: remove broken "csb637" board Wolfgang Denk
` (3 subsequent siblings)
15 siblings, 0 replies; 35+ messages in thread
From: Wolfgang Denk @ 2011-08-26 12:25 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
board/cmc_pu2/Makefile | 50 ----
board/cmc_pu2/cmc_pu2.c | 192 --------------
board/cmc_pu2/config.mk | 3 -
board/cmc_pu2/flash.c | 469 -----------------------------------
board/cmc_pu2/load_sernum_ethaddr.c | 113 ---------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/cmc_pu2.h | 238 ------------------
8 files changed, 1 insertions(+), 1066 deletions(-)
delete mode 100644 board/cmc_pu2/Makefile
delete mode 100644 board/cmc_pu2/cmc_pu2.c
delete mode 100644 board/cmc_pu2/config.mk
delete mode 100644 board/cmc_pu2/flash.c
delete mode 100644 board/cmc_pu2/load_sernum_ethaddr.c
delete mode 100644 include/configs/cmc_pu2.h
diff --git a/board/cmc_pu2/Makefile b/board/cmc_pu2/Makefile
deleted file mode 100644
index a60f2e9..0000000
--- a/board/cmc_pu2/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := cmc_pu2.o flash.o load_sernum_ethaddr.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/cmc_pu2/cmc_pu2.c b/board/cmc_pu2/cmc_pu2.c
deleted file mode 100644
index 0ac851c..0000000
--- a/board/cmc_pu2/cmc_pu2.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * Modified for CMC_PU2 (removed Smart Media support) by Gary Jennejohn
- * (2004) garyj at denx.de
- *
- * Modified for CMC_BASIC by Martin Krause (2005), TQ-Systems GmbH
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/mach-types.h>
-#include <asm/arch/AT91RM9200.h>
-#include <asm/io.h>
-#include <netdev.h>
-#if defined(CONFIG_DRIVER_ETHER)
-#include <at91rm9200_net.h>
-#include <dm9161.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-#define CMC_HP_BASIC 1
-#define CMC_PU2 2
-#define CMC_BASIC 4
-
-int hw_detect (void);
-
-int board_init (void)
-{
- AT91PS_PIO piob = AT91C_BASE_PIOB;
- AT91PS_PIO pioc = AT91C_BASE_PIOC;
-
- /* Enable Ctrlc */
- console_init_f ();
-
- /* Correct IRDA resistor problem */
- /* Set PA23_TXD in Output */
- /* (AT91PS_PIO) AT91C_BASE_PIOA->PIO_OER = AT91C_PA23_TXD2; */
-
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
-
- /* PIOB and PIOC clock enabling */
- *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB;
- *AT91C_PMC_PCER = 1 << AT91C_ID_PIOC;
-
- /*
- * configure PC0-PC3 as input without pull ups, so RS485 driver enable
- * (CMC-PU2) and digital outputs (CMC-BASIC) are deactivated.
- */
- pioc->PIO_ODR = AT91C_PIO_PC0 | AT91C_PIO_PC1 |
- AT91C_PIO_PC2 | AT91C_PIO_PC3;
- pioc->PIO_PPUDR = AT91C_PIO_PC0 | AT91C_PIO_PC1 |
- AT91C_PIO_PC2 | AT91C_PIO_PC3;
- pioc->PIO_PER = AT91C_PIO_PC0 | AT91C_PIO_PC1 |
- AT91C_PIO_PC2 | AT91C_PIO_PC3;
-
- /*
- * On CMC-PU2 board configure PB3-PB6 to input without pull ups to
- * clear the duo LEDs (the external pull downs assure a proper
- * signal). On CMC-BASIC and CMC-HP-BASIC set PB3-PB6 to output and
- * drive it high, to configure current measurement on AINx.
- */
- if (hw_detect() & CMC_PU2) {
- piob->PIO_ODR = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
- AT91C_PIO_PB5 | AT91C_PIO_PB6;
- }
- else if ((hw_detect() & CMC_BASIC) || (hw_detect() & CMC_HP_BASIC)) {
- piob->PIO_SODR = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
- AT91C_PIO_PB5 | AT91C_PIO_PB6;
- piob->PIO_OER = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
- AT91C_PIO_PB5 | AT91C_PIO_PB6;
- }
- piob->PIO_PPUDR = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
- AT91C_PIO_PB5 | AT91C_PIO_PB6;
- piob->PIO_PER = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
- AT91C_PIO_PB5 | AT91C_PIO_PB6;
-
- /*
- * arch number of CMC_PU2-Board. MACH_TYPE_CMC_PU2 is not supported in
- * the linuxarm kernel, yet.
- */
- /* gd->bd->bi_arch_number = MACH_TYPE_CMC_PU2; */
- gd->bd->bi_arch_number = 251;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
-}
-
-int checkboard (void)
-{
- if (hw_detect() & CMC_PU2)
- puts ("Board: CMC-PU2 (Rittal GmbH)\n");
- else if (hw_detect() & CMC_BASIC)
- puts ("Board: CMC-BASIC (Rittal GmbH)\n");
- else if (hw_detect() & CMC_HP_BASIC)
- puts ("Board: CMC-HP-BASIC (Rittal GmbH)\n");
- else
- puts ("Board: unknown\n");
- return 0;
-}
-
-int hw_detect (void)
-{
- AT91PS_PIO pio = AT91C_BASE_PIOB;
-
- /* PIOB clock enabling */
- *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB;
-
- /* configure PB12 as input without pull up */
- pio->PIO_ODR = AT91C_PIO_PB12;
- pio->PIO_PPUDR = AT91C_PIO_PB12;
- pio->PIO_PER = AT91C_PIO_PB12;
-
- /* configure PB13 as input without pull up */
- pio->PIO_ODR = AT91C_PIO_PB13;
- pio->PIO_PPUDR = AT91C_PIO_PB13;
- pio->PIO_PER = AT91C_PIO_PB13;
-
- /* read board identification pin */
- if (pio->PIO_PDSR & AT91C_PIO_PB12)
- return ((pio->PIO_PDSR & AT91C_PIO_PB13)
- ? CMC_PU2 : 0);
- else
- return ((pio->PIO_PDSR & AT91C_PIO_PB13)
- ? CMC_HP_BASIC : CMC_BASIC);
-}
-
-#ifdef CONFIG_DRIVER_ETHER
-#if defined(CONFIG_CMD_NET)
-
-/*
- * Name:
- * at91rm9200_GetPhyInterface
- * Description:
- * Initialise the interface functions to the PHY
- * Arguments:
- * None
- * Return value:
- * None
- */
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
-{
- p_phyops->Init = dm9161_InitPhy;
- p_phyops->IsPhyConnected = dm9161_IsPhyConnected;
- p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed;
- p_phyops->AutoNegotiate = dm9161_AutoNegotiate;
-}
-
-#endif
-#endif /* CONFIG_DRIVER_ETHER */
-
-#ifdef CONFIG_DRIVER_AT91EMAC
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
- rc = at91emac_register(bis, 0);
- return rc;
-}
-#endif
diff --git a/board/cmc_pu2/config.mk b/board/cmc_pu2/config.mk
deleted file mode 100644
index cdb8a5f..0000000
--- a/board/cmc_pu2/config.mk
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x20F00000
-## For testing: load at 0x20100000 and "go" at 0x201000A4
-#CONFIG_SYS_TEXT_BASE = 0x20100000
diff --git a/board/cmc_pu2/flash.c b/board/cmc_pu2/flash.c
deleted file mode 100644
index d10faab..0000000
--- a/board/cmc_pu2/flash.c
+++ /dev/null
@@ -1,469 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * (C) Copyright 2004
- * Martin Krause, TQ-Systems GmbH, martin.krause at tqs.de
- *
- * Modified for the CMC PU2 by (C) Copyright 2004 Gary Jennejohn
- * garyj at denx.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#ifndef CONFIG_ENV_ADDR
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-#endif
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-#define FLASH_CYCLE1 0x0555
-#define FLASH_CYCLE2 0x02AA
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(vu_short *addr, flash_info_t *info);
-static void flash_reset(flash_info_t *info);
-static int write_word_amd(flash_info_t *info, vu_short *dest, ushort data);
-static flash_info_t *flash_get_info(ulong base);
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-unsigned long flash_init (void)
-{
- unsigned long size = 0;
- ulong flashbase = CONFIG_SYS_FLASH_BASE;
-
- /* Init: no FLASHes known */
- memset(&flash_info[0], 0, sizeof(flash_info_t));
-
- flash_info[0].size = flash_get_size((vu_short *)flashbase, &flash_info[0]);
-
- size = flash_info[0].size;
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- flash_get_info(CONFIG_SYS_MONITOR_BASE));
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
- flash_get_info(CONFIG_ENV_ADDR));
-#endif
-
- return size ? size : 1;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_reset(flash_info_t *info)
-{
- vu_short *base = (vu_short *)(info->start[0]);
-
- /* Put FLASH back in read mode */
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
- *base = 0x00FF; /* Intel Read Mode */
- else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
- *base = 0x00F0; /* AMD Read Mode */
-}
-
-/*-----------------------------------------------------------------------
- */
-
-static flash_info_t *flash_get_info(ulong base)
-{
- int i;
- flash_info_t * info;
-
- info = NULL;
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
- info = & flash_info[i];
- if (info->size && info->start[0] <= base &&
- base <= info->start[0] + info->size - 1)
- break;
- }
-
- return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_SST: printf ("SST "); break;
- case FLASH_MAN_STM: printf ("STM "); break;
- case FLASH_MAN_INTEL: printf ("INTEL "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_S29GL064M:
- printf ("S29GL064M-R6 (64Mbit, uniform sector size)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20,
- info->sector_count);
-
- printf (" Sector Start Addresses:");
-
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-ulong flash_get_size (vu_short *addr, flash_info_t *info)
-{
- int i;
- ushort value;
- ulong base = (ulong)addr;
-
- /* Write auto select command sequence */
- addr[FLASH_CYCLE1] = 0x00AA; /* for AMD, Intel ignores this */
- addr[FLASH_CYCLE2] = 0x0055; /* for AMD, Intel ignores this */
- addr[FLASH_CYCLE1] = 0x0090; /* selects Intel or AMD */
-
- /* read Manufacturer ID */
- udelay(100);
- value = addr[0];
- debug ("Manufacturer ID: %04X\n", value);
-
- switch (value) {
-
- case (AMD_MANUFACT & 0xFFFF):
- debug ("Manufacturer: AMD (Spansion)\n");
- info->flash_id = FLASH_MAN_AMD;
- break;
-
- case (INTEL_MANUFACT & 0xFFFF):
- debug ("Manufacturer: Intel (not supported yet)\n");
- info->flash_id = FLASH_MAN_INTEL;
- break;
-
- default:
- printf ("Unknown Manufacturer ID: %04X\n", value);
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- goto out;
- }
-
- value = addr[1];
- debug ("Device ID: %04X\n", value);
-
- switch (addr[1]) {
-
- case (AMD_ID_MIRROR & 0xFFFF):
- debug ("Mirror Bit flash: addr[14] = %08X addr[15] = %08X\n",
- addr[14], addr[15]);
-
- switch(addr[14]) {
- case (AMD_ID_GL064M_2 & 0xFFFF):
- if (addr[15] != (AMD_ID_GL064M_3 & 0xffff)) {
- printf ("Chip: S29GLxxxM -> unknown\n");
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- } else {
- debug ("Chip: S29GL064M-R6\n");
- info->flash_id += FLASH_S29GL064M;
- info->sector_count = 128;
- info->size = 0x00800000;
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base;
- base += 0x10000;
- }
- }
- break; /* => 16 MB */
- default:
- printf ("Chip: *** unknown ***\n");
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- break;
- }
- break;
-
- default:
- printf ("Unknown Device ID: %04X\n", value);
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- break;
- }
-
-out:
- /* Put FLASH back in read mode */
- flash_reset(info);
-
- return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- vu_short *addr = (vu_short *)(info->start[0]);
- int flag, prot, sect, ssect, l_sect;
- ulong now, last, start;
-
- debug ("flash_erase: first: %d last: %d\n", s_first, s_last);
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > FLASH_AMD_COMP)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- /*
- * Start erase on unprotected sectors.
- * Since the flash can erase multiple sectors with one command
- * we take advantage of that by doing the erase in chunks of
- * 3 sectors.
- */
- for (sect = s_first; sect <= s_last; ) {
- l_sect = -1;
-
- addr[FLASH_CYCLE1] = 0x00AA;
- addr[FLASH_CYCLE2] = 0x0055;
- addr[FLASH_CYCLE1] = 0x0080;
- addr[FLASH_CYCLE1] = 0x00AA;
- addr[FLASH_CYCLE2] = 0x0055;
-
- /* do the erase in chunks of@most 3 sectors */
- for (ssect = 0; ssect < 3; ssect++) {
- if ((sect + ssect) > s_last)
- break;
- if (info->protect[sect + ssect] == 0) { /* not protected */
- addr = (vu_short *)(info->start[sect + ssect]);
- addr[0] = 0x0030;
- l_sect = sect + ssect;
- }
- }
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer(0);
- last = 0;
- addr = (vu_short *)(info->start[l_sect]);
- while ((addr[0] & 0x0080) != 0x0080) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
- addr = (vu_short *)info->start[0];
- addr[0] = 0x00F0; /* reset bank */
- sect += ssect;
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
-DONE:
- /* reset to read mode */
- addr = (vu_short *)info->start[0];
- addr[0] = 0x00F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong wp, data;
- int rc;
-
- if (addr & 1) {
- printf ("unaligned destination not supported\n");
- return ERR_ALIGN;
- };
-
- if ((int) src & 1) {
- printf ("unaligned source not supported\n");
- return ERR_ALIGN;
- };
-
- wp = addr;
-
- while (cnt >= 2) {
- data = *((vu_short *)src);
- if ((rc = write_word_amd(info, (vu_short *)wp, data)) != 0) {
-printf ("write_buff 1: write_word_amd() rc=%d\n", rc);
- return (rc);
- }
- src += 2;
- wp += 2;
- cnt -= 2;
- }
-
- if (cnt == 0) {
- return (ERR_OK);
- }
-
- if (cnt == 1) {
- data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) << 8);
- if ((rc = write_word_amd(info, (vu_short *)wp, data)) != 0) {
-printf ("write_buff 1: write_word_amd() rc=%d\n", rc);
- return (rc);
- }
- src += 1;
- wp += 1;
- cnt -= 1;
- }
-
- return ERR_OK;
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_amd (flash_info_t *info, vu_short *dest, ushort data)
-{
- int flag;
- vu_short *base; /* first address in flash bank */
- ulong start;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest & data) != data) {
- return (2);
- }
-
- base = (vu_short *)(info->start[0]);
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- base[FLASH_CYCLE1] = 0x00AA; /* unlock */
- base[FLASH_CYCLE2] = 0x0055; /* unlock */
- base[FLASH_CYCLE1] = 0x00A0; /* selects program mode */
-
- *dest = data; /* start programming the data */
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- start = get_timer(0);
-
- /* data polling for D7 */
- while ((*dest & 0x0080) != (data & 0x0080)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *dest = 0x00F0; /* reset bank */
- return (1);
- }
- }
- return (0);
-}
diff --git a/board/cmc_pu2/load_sernum_ethaddr.c b/board/cmc_pu2/load_sernum_ethaddr.c
deleted file mode 100644
index 6f85dd9..0000000
--- a/board/cmc_pu2/load_sernum_ethaddr.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * (C) Copyright 2000, 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * (C) Copyright 2005
- * Martin Krause, TQ-Systems GmbH, martin.krause at tqs.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* #define DEBUG */
-
-#include <common.h>
-#include <net.h>
-
-#define I2C_CHIP 0x50 /* I2C bus address of onboard EEPROM */
-#define I2C_ALEN 1 /* length of EEPROM addresses in bytes */
-#define I2C_OFFSET 0x0 /* start address of manufacturere data block
- * in EEPROM */
-
-/* 64 Byte manufacturer data block in EEPROM */
-struct manufacturer_data {
- unsigned int serial_number; /* serial number (0...999999) */
- unsigned short hardware; /* hardware version (e.g. V1.02) */
- unsigned short manuf_date; /* manufacture date (e.g. 25/02) */
- unsigned char name[20]; /* device name (in CHIP.INI) */
- unsigned char macadr[6]; /* MAC address */
- signed char a_kal[4]; /* calibration value for U */
- signed char i_kal[4]; /* calibration value for I */
- unsigned char reserve[18]; /* reserved */
- unsigned short save_nr; /* save count */
- unsigned short chksum; /* checksum */
-};
-
-
-int i2c_read (unsigned char chip, unsigned int addr, int alen,
- unsigned char *buffer, int len);
-
-/*-----------------------------------------------------------------------
- * Process manufacturer data block in EEPROM:
- *
- * If we boot on a system fresh from factory, check if the manufacturer data
- * in the EEPROM is valid and save some information it contains.
- *
- * CMC manufacturer data is defined as follows:
- *
- * - located in the onboard EEPROM
- * - starts at offset 0x0
- * - size 0x00000040
- *
- * Internal structure: see struct definition
- */
-
-int misc_init_r(void)
-{
- struct manufacturer_data data;
- char serial [9];
- unsigned short chksum;
- unsigned char *p;
- unsigned short i;
-
-#if !defined(CONFIG_HARD_I2C) && !defined(CONFIG_SOFT_I2C)
-#error you must define some I2C support (CONFIG_HARD_I2C or CONFIG_SOFT_I2C)
-#endif
- if (i2c_read(I2C_CHIP, I2C_OFFSET, I2C_ALEN, (unsigned char *)&data,
- sizeof(data)) != 0) {
- puts ("Error reading manufacturer data from EEPROM\n");
- return -1;
- }
-
- /* check if manufacturer data block is valid */
- p = (unsigned char *)&data;
- chksum = 0;
- for (i = 0; i < (sizeof(data) - sizeof(data.chksum)); i++)
- chksum += *p++;
-
- debug ("checksum of manufacturer data block: %#.4x\n", chksum);
-
- if (chksum != data.chksum) {
- puts ("Error: manufacturer data block has invalid checksum\n");
- return -1;
- }
-
- /* copy serial number */
- sprintf (serial, "%d", data.serial_number);
-
- /* set serial# and ethaddr if not yet defined */
- if (getenv("serial#") == NULL) {
- setenv ("serial#", serial);
- }
-
- if (getenv("ethaddr") == NULL) {
- eth_setenv_enetaddr("ethaddr", data.macadr);
- }
-
- return 0;
-}
diff --git a/boards.cfg b/boards.cfg
index 2687bb3..24a4e56 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -57,7 +57,6 @@ at91rm9200ek_ram arm arm920t at91rm9200ek atmel
eb_cpux9k2 arm arm920t - BuS at91
cpuat91 arm arm920t cpuat91 eukrea at91 cpuat91
cpuat91_ram arm arm920t cpuat91 eukrea at91 cpuat91:RAMBOOT
-cmc_pu2 arm arm920t - - at91rm9200
csb637 arm arm920t - - at91rm9200
kb9202 arm arm920t - - at91rm9200
m501sk arm arm920t - - at91rm9200
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 1c5c5e2..8f5c7f5 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+cmc_pu2 arm arm920t - 2011-07-17
at91cap9adk arm arm926ejs - 2011-07-17 Stelian Pop <stelian.pop@leadtechdesign.com>
voiceblue arm arm925t - 2011-07-17
versatile arm ARM926EJS - 2011-07-17 Peter Pearse <peter.pearse@arm.com>
diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h
deleted file mode 100644
index a197635..0000000
--- a/include/configs/cmc_pu2.h
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * 2004-2005 Gary Jennejohn <garyj@denx.de>
- *
- * Configuration settings for the CMC PU2 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */
-#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK/3) /* peripheral clock */
-
-#define AT91_SLOW_CLOCK 32768 /* slow clock */
-
-#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
-#define CONFIG_CMC_PU2 1 /* on an CMC_PU2 Board */
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define USE_920T_MMU 1
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
-/* flash */
-#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000
-#define CONFIG_SYS_SMC_CSR0_VAL 0x100032ad /* 16bit, 2 TDF, 4 WS */
-
-/* clocks */
-#define CONFIG_SYS_PLLAR_VAL 0x2026BE04 /* 179,712 MHz for PCK */
-#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */
-
-/* sdram */
-#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000
-#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000
-#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_CR_VAL 0x3399c1d4 /* set up the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
-#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
-#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
-#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */
-#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_BAUDRATE 9600
-
-/*
- * Hardware drivers
- */
-
-/* define one of these to choose the DBGU, USART0 or USART1 as console */
-#define CONFIG_AT91RM9200_USART
-#undef CONFIG_DBGU
-#define CONFIG_USART0
-#undef CONFIG_USART1
-
-#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
-
-#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
-
-#define CONFIG_HARD_I2C
-
-#ifdef CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 0 /* not used */
-#define CONFIG_SYS_I2C_SLAVE 0 /* not used */
-#define CONFIG_RTC_RS5C372A /* RICOH I2C RTC */
-#define CONFIG_SYS_I2C_RTC_ADDR 0x32
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
-#else
-#define CONFIG_TIMESTAMP
-#endif
-/* still about 20 kB free with this defined */
-#define CONFIG_SYS_LONGHELP
-
-#define CONFIG_BOOTDELAY 1
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_SNTP
-
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_MISC
-
-#if defined(CONFIG_HARD_I2C)
- #define CONFIG_CMD_DATE
- #define CONFIG_CMD_EEPROM
- #define CONFIG_CMD_I2C
-#endif
-
-
-#define CONFIG_MISC_INIT_R
-#define CONFIG_SYS_LONGHELP
-
-#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */
-#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */
-
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x1000000 /* 16 megs */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
-
-#define CONFIG_NET_MULTI 1
-#ifdef CONFIG_NET_MULTI
-#define CONFIG_DRIVER_AT91EMAC 1
-#define CONFIG_SYS_RX_ETH_BUFFER 8
-#else
-#define CONFIG_DRIVER_ETHER 1
-#endif
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_AT91C_USE_RMII
-
-#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
-#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */
-
-#define PHYS_FLASH_1 0x10000000
-#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-#define CONFIG_SYS_FLASH_ERASE_TOUT (11 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT ( 2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x20000 /* after u-boot.bin */
-#define CONFIG_ENV_SECT_SIZE (64 << 10) /* sectors are 64 kB */
-#define CONFIG_ENV_SIZE (16 << 10) /* Use only 16 kB */
-
-#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
-
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */
- /* AT91C_TC_TIMER_DIV1_CLOCK */
-
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "net_nfs=tftp ${loadaddr} ${bootfile};run nfsargs addip addcons " \
- "addmtd;bootm\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "net_cramfs=tftp ${loadaddr} ${bootfile}; run flashargs addip " \
- "addcons addmtd; bootm\0" \
- "flash_cramfs=run flashargs addip addcons addmtd; bootm 10030000\0" \
- "flashargs=setenv bootargs root=/dev/mtdblock3 ro\0" \
- "addip=setenv bootargs ${bootargs} ethaddr=${ethaddr} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
- "${hostname}::off\0" \
- "addcons=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
- "addmtd=setenv bootargs ${bootargs} mtdparts=cmc_pu2:128k(uboot)ro," \
- "64k(environment),768k(linux),4096k(root),-\0" \
- "load=tftp ${loadaddr} ${loadfile}\0" \
- "update=protect off 10000000 1001ffff;erase 10000000 1001ffff; " \
- "cp.b ${loadaddr} 10000000 ${filesize};" \
- "protect on 10000000 1001ffff\0" \
- "updatel=era 10030000 100effff;tftp ${loadaddr} ${bootfile}; " \
- "cp.b ${loadaddr} 10030000 ${filesize}\0" \
- "updatec=era 100f0000 104effff;tftp ${loadaddr} ${cramfsimage}; " \
- "cp.b ${loadaddr} 100f0000 ${filesize}\0" \
- "updatej=era 104f0000 107fffff;tftp ${loadaddr} ${jffsimage}; " \
- "cp.b ${loadaddr} 104f0000 ${filesize}\0" \
- "cramfsimage=cramfs_cmc-pu2.img\0" \
- "jffsimage=jffs2_cmc-pu2.img\0" \
- "loadfile=u-boot_cmc-pu2.bin\0" \
- "bootfile=uImage_cmc-pu2\0" \
- "loadaddr=0x20800000\0" \
- "hostname=CMC-TC-PU2\0" \
- "bootcmd=run dhcp_start;run flash_cramfs\0" \
- "autoload=n\0" \
- "dhcp_start=echo no DHCP\0" \
- "ipaddr=192.168.0.190\0"
-#endif /* __CONFIG_H */
--
1.7.6
^ permalink raw reply related [flat|nested] 35+ messages in thread* [U-Boot] [PATCH v2 13/16] ARM: remove broken "csb637" board
2011-08-26 12:25 ` [U-Boot] [PATCH v2 00/16] " Wolfgang Denk
` (11 preceding siblings ...)
2011-08-26 12:25 ` [U-Boot] [PATCH v2 12/16] ARM: remove broken "cmc_pu2" board Wolfgang Denk
@ 2011-08-26 12:25 ` Wolfgang Denk
2011-08-26 12:25 ` [U-Boot] [PATCH v2 14/16] ARM: remove broken "kb9202" board Wolfgang Denk
` (2 subsequent siblings)
15 siblings, 0 replies; 35+ messages in thread
From: Wolfgang Denk @ 2011-08-26 12:25 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
board/csb637/Makefile | 50 ------------
board/csb637/config.mk | 1 -
board/csb637/csb637.c | 94 ----------------------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/csb637.h | 196 ----------------------------------------------
6 files changed, 1 insertions(+), 342 deletions(-)
delete mode 100644 board/csb637/Makefile
delete mode 100644 board/csb637/config.mk
delete mode 100644 board/csb637/csb637.c
delete mode 100644 include/configs/csb637.h
diff --git a/board/csb637/Makefile b/board/csb637/Makefile
deleted file mode 100644
index a5484ae..0000000
--- a/board/csb637/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := csb637.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/csb637/config.mk b/board/csb637/config.mk
deleted file mode 100644
index e2cc8a6..0000000
--- a/board/csb637/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23fc0000
diff --git a/board/csb637/csb637.c b/board/csb637/csb637.c
deleted file mode 100644
index d7fdcc4..0000000
--- a/board/csb637/csb637.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * (C) Copyright 2005 REA Elektronik GmbH <www.rea.de>
- * Anders Larsen <alarsen@rea.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/AT91RM9200.h>
-#include <netdev.h>
-#include <asm/io.h>
-#if defined(CONFIG_DRIVER_ETHER)
-#include <at91rm9200_net.h>
-#include <bcm5221.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* Enable Ctrlc */
- console_init_f ();
-
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
-
- /* arch number of CSB637-Board */
- gd->bd->bi_arch_number = MACH_TYPE_CSB637;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
-}
-
-#ifdef CONFIG_DRIVER_ETHER
-#if defined(CONFIG_CMD_NET)
-
-/*
- * Name:
- * at91rm9200_GetPhyInterface
- * Description:
- * Initialise the interface functions to the PHY
- * Arguments:
- * None
- * Return value:
- * None
- */
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
-{
- p_phyops->Init = bcm5221_InitPhy;
- p_phyops->IsPhyConnected = bcm5221_IsPhyConnected;
- p_phyops->GetLinkSpeed = bcm5221_GetLinkSpeed;
- p_phyops->AutoNegotiate = bcm5221_AutoNegotiate;
-}
-
-#endif
-#endif /* CONFIG_DRIVER_ETHER */
-
-#ifdef CONFIG_DRIVER_AT91EMAC
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
- rc = at91emac_register(bis, 0);
- return rc;
-}
-#endif
diff --git a/boards.cfg b/boards.cfg
index 24a4e56..4279dc7 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -57,7 +57,6 @@ at91rm9200ek_ram arm arm920t at91rm9200ek atmel
eb_cpux9k2 arm arm920t - BuS at91
cpuat91 arm arm920t cpuat91 eukrea at91 cpuat91
cpuat91_ram arm arm920t cpuat91 eukrea at91 cpuat91:RAMBOOT
-csb637 arm arm920t - - at91rm9200
kb9202 arm arm920t - - at91rm9200
m501sk arm arm920t - - at91rm9200
at91rm9200dk arm arm920t - atmel at91rm9200
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 8f5c7f5..d8c2cb6 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+csb637 arm arm920t - 2011-07-17
cmc_pu2 arm arm920t - 2011-07-17
at91cap9adk arm arm926ejs - 2011-07-17 Stelian Pop <stelian.pop@leadtechdesign.com>
voiceblue arm arm925t - 2011-07-17
diff --git a/include/configs/csb637.h b/include/configs/csb637.h
deleted file mode 100644
index 7a85d65..0000000
--- a/include/configs/csb637.h
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * (C) Copyright 2005 REA Elektronik GmbH <www.rea.de>
- * Anders Larsen <alarsen@rea.de>
- *
- * Configuation settings for the Cogent CSB637 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-#define AT91C_MAIN_CLOCK 184320000 /* from 3.6864 MHz crystal (3686400 * 50) */
-#define AT91C_MASTER_CLOCK 46080000 /* (AT91C_MAIN_CLOCK/4) peripheral clock */
-
-#define AT91_SLOW_CLOCK 32768 /* slow clock */
-
-#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
-#define CONFIG_CSB637 1 /* on a CSB637 board */
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define USE_920T_MMU 1
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
-/* flash */
-#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000
-#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
-
-/* clocks */
-#define CONFIG_SYS_PLLAR_VAL 0x2031BE01 /* 184.320000 MHz for PCK */
-#define CONFIG_SYS_PLLBR_VAL 0x128A3E19 /* 47.996928 MHz (divider by 2 for USB) */
-#define CONFIG_SYS_MCKR_VAL 0x00000302 /* PCK/4 = MCK Master Clock = 46.080000 MHz from PLLA */
-
-/* sdram */
-#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000
-#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000
-#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_CR_VAL 0x21914159 /* set up the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
-#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
-#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
-#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */
-#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_SYS_AT91C_BRGR_DIVISOR 75 /* hardcode so no __divsi3 : AT91C_MASTER_CLOCK / baudrate / 16 */
-
-/*
- * Hardware drivers
- */
-
-/* define one of these to choose the DBGU, USART0 or USART1 as console */
-#define CONFIG_AT91RM9200_USART
-#define CONFIG_DBGU
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-
-#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
-
-#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
-
-#define CONFIG_BOOTDELAY 3
-/* #define CONFIG_ENV_OVERWRITE 1 */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x4000000 /* 64 megs */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 512*1024 - 4
-#define CONFIG_SYS_ALT_MEMTEST 1
-#define CONFIG_SYS_MEMTEST_SCRATCH CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 4
-
-#define CONFIG_NET_MULTI 1
-#ifdef CONFIG_NET_MULTI
-#define CONFIG_DRIVER_AT91EMAC 1
-#define CONFIG_SYS_RX_ETH_BUFFER 8
-#else
-#define CONFIG_DRIVER_ETHER 1
-#endif
-#define CONFIG_NET_RETRY_COUNT 20
-#undef CONFIG_AT91C_USE_RMII
-
-#undef CONFIG_HAS_DATAFLASH
-#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 0
-#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */
-
-/*
- * FLASH Device configuration
- */
-#define PHYS_FLASH_1 0x10000000
-#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_FLASH_CFI 1 /* flash is CFI conformant */
-#define CONFIG_FLASH_CFI_DRIVER 1 /* use common cfi driver */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max # of memory banks */
-#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */
-#define CONFIG_SYS_FLASH_PROTECTION 1 /* hardware flash protection */
-#define CONFIG_SYS_MAX_FLASH_SECT 64
-
-#define CONFIG_SYS_JFFS2_FIRST_BANK 0
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR 3
-#define CONFIG_SYS_JFFS2_NUM_BANKS 1
-
-#undef CONFIG_ENV_IS_IN_DATAFLASH
-
-#ifdef CONFIG_ENV_IS_IN_DATAFLASH
-#define CONFIG_ENV_OFFSET 0x20000
-#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */
-#else
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) /* after u-boot.bin */
-#define CONFIG_ENV_SIZE 0x20000 /* sectors are 128K here */
-#endif /* CONFIG_ENV_IS_IN_DATAFLASH */
-
-
-#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
-
-#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */
- /* AT91C_TC_TIMER_DIV1_CLOCK */
-
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif
--
1.7.6
^ permalink raw reply related [flat|nested] 35+ messages in thread* [U-Boot] [PATCH v2 14/16] ARM: remove broken "kb9202" board
2011-08-26 12:25 ` [U-Boot] [PATCH v2 00/16] " Wolfgang Denk
` (12 preceding siblings ...)
2011-08-26 12:25 ` [U-Boot] [PATCH v2 13/16] ARM: remove broken "csb637" board Wolfgang Denk
@ 2011-08-26 12:25 ` Wolfgang Denk
2011-08-26 12:25 ` [U-Boot] [PATCH v2 15/16] ARM: remove broken "m501sk" board Wolfgang Denk
2011-08-26 12:25 ` [U-Boot] [PATCH v2 16/16] ARM: remove broken "at91rm9200dk" board Wolfgang Denk
15 siblings, 0 replies; 35+ messages in thread
From: Wolfgang Denk @ 2011-08-26 12:25 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
board/kb9202/Makefile | 53 -------------
board/kb9202/config.mk | 1 -
board/kb9202/kb9202.c | 107 -------------------------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/kb9202.h | 196 ----------------------------------------------
6 files changed, 1 insertions(+), 358 deletions(-)
delete mode 100644 board/kb9202/Makefile
delete mode 100644 board/kb9202/config.mk
delete mode 100644 board/kb9202/kb9202.c
delete mode 100644 include/configs/kb9202.h
diff --git a/board/kb9202/Makefile b/board/kb9202/Makefile
deleted file mode 100644
index 49be161..0000000
--- a/board/kb9202/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-# Adapted for KwikByte KB920x boards - APR2005
-#
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := kb9202.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS)
- $(call cmd_link_o_target, $(OBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/kb9202/config.mk b/board/kb9202/config.mk
deleted file mode 100644
index 2077692..0000000
--- a/board/kb9202/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21f00000
diff --git a/board/kb9202/kb9202.c b/board/kb9202/kb9202.c
deleted file mode 100644
index 3164cc5..0000000
--- a/board/kb9202/kb9202.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Adapted for KwikByte KB920x board from at91rm9200dk.c: 22APR2005
- */
-
-#include <common.h>
-#include <asm/arch/AT91RM9200.h>
-#include <asm/io.h>
-#include <netdev.h>
-#if defined(CONFIG_DRIVER_ETHER)
-#include <at91rm9200_net.h>
-#include <lxt971a.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-void lowlevel_init(void) {
- /* Required by assembly functions - do nothing */
-}
-
-int board_init (void)
-{
- /* Enable Ctrlc */
- console_init_f ();
-
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
-
- gd->bd->bi_arch_number = MACH_TYPE_KB9200;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
-}
-
-#ifdef CONFIG_DRIVER_ETHER
-#if defined(CONFIG_CMD_NET)
-
-unsigned int lxt972_IsPhyConnected (AT91PS_EMAC p_mac);
-UCHAR lxt972_GetLinkSpeed (AT91PS_EMAC p_mac);
-UCHAR lxt972_InitPhy (AT91PS_EMAC p_mac);
-UCHAR lxt972_AutoNegotiate (AT91PS_EMAC p_mac, int *status);
-
-/*
- * Name:
- * at91rm9200_GetPhyInterface
- * Description:
- * Initialise the interface functions to the PHY
- * Arguments:
- * None
- * Return value:
- * None
- */
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
-{
- p_phyops->Init = lxt972_InitPhy;
- p_phyops->IsPhyConnected = lxt972_IsPhyConnected;
- p_phyops->GetLinkSpeed = lxt972_GetLinkSpeed;
- p_phyops->AutoNegotiate = lxt972_AutoNegotiate;
-}
-
-#endif
-#endif /* CONFIG_DRIVER_ETHER */
-
-#ifdef CONFIG_DRIVER_AT91EMAC
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
- rc = at91emac_register(bis, 0);
- return rc;
-}
-#endif
diff --git a/boards.cfg b/boards.cfg
index 4279dc7..ae3c093 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -57,7 +57,6 @@ at91rm9200ek_ram arm arm920t at91rm9200ek atmel
eb_cpux9k2 arm arm920t - BuS at91
cpuat91 arm arm920t cpuat91 eukrea at91 cpuat91
cpuat91_ram arm arm920t cpuat91 eukrea at91 cpuat91:RAMBOOT
-kb9202 arm arm920t - - at91rm9200
m501sk arm arm920t - - at91rm9200
at91rm9200dk arm arm920t - atmel at91rm9200
mx1ads arm arm920t - - imx
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index d8c2cb6..24233a0 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+kb9202 arm arm920t - 2011-07-17
csb637 arm arm920t - 2011-07-17
cmc_pu2 arm arm920t - 2011-07-17
at91cap9adk arm arm926ejs - 2011-07-17 Stelian Pop <stelian.pop@leadtechdesign.com>
diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h
deleted file mode 100644
index cfb7cea..0000000
--- a/include/configs/kb9202.h
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * Rick Bronson <rick@efn.org>
- *
- * Configuation settings for the AT91RM9200DK board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Adatped for KwikByte KB920x board from at91rm9200dk.h: 22APR2005
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-#define AT91C_MAIN_CLOCK 180000000 /* from 10 MHz crystal */
-#define AT91C_MASTER_CLOCK 60000000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */
-
-#define AT91_SLOW_CLOCK 32768 /* slow clock */
-
-#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
-/* Only define one of the following, based on board type */
-/* #define CONFIG_KB9200 1 KwikByte KB9202 board */
-/* #define CONFIG_KB9201 1 KwikByte KB9202 board */
-#define CONFIG_KB9202 1 /* KwikByte KB9202 board */
-
-#define CONFIG_KB920x 1 /* Any KB920x board */
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define USE_920T_MMU 1
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-#define CONFIG_SYS_LONGHELP
-
-#ifndef roundup
-#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
-#endif
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (roundup(CONFIG_ENV_SIZE,4096) + 128*1024)
-
-#define CONFIG_BAUDRATE 115200
-
-/*
- * Hardware drivers
- */
-
-/* define one of these to choose the DBGU, USART0 or USART1 as console */
-#define CONFIG_AT91RM9200_USART
-#define CONFIG_DBGU
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-
-#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
-
-#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ENV_OVERWRITE 1
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_MISC
-
-
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - (512*1024)
-
-#define CONFIG_NET_MULTI 1
-#ifdef CONFIG_NET_MULTI
-#define CONFIG_DRIVER_AT91EMAC 1
-#define CONFIG_SYS_RX_ETH_BUFFER 8
-#else
-#define CONFIG_DRIVER_ETHER 1
-#endif
-#define CONFIG_NET_RETRY_COUNT 20
-
-#define CONFIG_SYS_FLASH_BASE 0x10000000
-
-#ifdef CONFIG_KB9202
-#define PHYS_FLASH_SIZE 0x1000000
-#else
-#define PHYS_FLASH_SIZE 0x200000
-#endif
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-
-#define CONFIG_HARD_I2C
-
-#define CONFIG_ENV_IS_IN_EEPROM
-
-#ifdef CONFIG_KB9202
-#define CONFIG_ENV_OFFSET 0x3E00
-#define CONFIG_ENV_SIZE 0x0200
-#else
-#define CONFIG_ENV_OFFSET 0x1000
-#define CONFIG_ENV_SIZE 0x1000
-#endif
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0 /* not used */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-
-#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
-
-#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-
-#ifndef __ASSEMBLY__
-/*-----------------------------------------------------------------------
- * Board specific extension for bd_info
- *
- * This structure is embedded in the global bd_info (bd_t) structure
- * and can be used by the board specific code (eg board/...)
- */
-
-struct bd_info_ext {
- /* helper variable for board environment handling
- *
- * env_crc_valid == 0 => uninitialised
- * env_crc_valid > 0 => environment crc in flash is valid
- * env_crc_valid < 0 => environment crc in flash is invalid
- */
- int env_crc_valid;
-};
-#endif
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */
- /* AT91C_TC_TIMER_DIV1_CLOCK */
-
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif
--
1.7.6
^ permalink raw reply related [flat|nested] 35+ messages in thread* [U-Boot] [PATCH v2 15/16] ARM: remove broken "m501sk" board
2011-08-26 12:25 ` [U-Boot] [PATCH v2 00/16] " Wolfgang Denk
` (13 preceding siblings ...)
2011-08-26 12:25 ` [U-Boot] [PATCH v2 14/16] ARM: remove broken "kb9202" board Wolfgang Denk
@ 2011-08-26 12:25 ` Wolfgang Denk
2011-08-26 12:25 ` [U-Boot] [PATCH v2 16/16] ARM: remove broken "at91rm9200dk" board Wolfgang Denk
15 siblings, 0 replies; 35+ messages in thread
From: Wolfgang Denk @ 2011-08-26 12:25 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
board/m501sk/Makefile | 50 ----------
board/m501sk/config.mk | 1 -
board/m501sk/eeprom.c | 102 ---------------------
board/m501sk/m501sk.c | 203 -----------------------------------------
board/m501sk/m501sk.h | 167 ---------------------------------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/m501sk.h | 228 ----------------------------------------------
8 files changed, 1 insertions(+), 752 deletions(-)
delete mode 100644 board/m501sk/Makefile
delete mode 100644 board/m501sk/config.mk
delete mode 100644 board/m501sk/eeprom.c
delete mode 100644 board/m501sk/m501sk.c
delete mode 100644 board/m501sk/m501sk.h
delete mode 100644 include/configs/m501sk.h
diff --git a/board/m501sk/Makefile b/board/m501sk/Makefile
deleted file mode 100644
index 439e99f..0000000
--- a/board/m501sk/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := m501sk.o eeprom.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/m501sk/config.mk b/board/m501sk/config.mk
deleted file mode 100644
index 2077692..0000000
--- a/board/m501sk/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21f00000
diff --git a/board/m501sk/eeprom.c b/board/m501sk/eeprom.c
deleted file mode 100644
index d1a46f3..0000000
--- a/board/m501sk/eeprom.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Add by Alan Lu, 07-29-2005
- * For ATMEL AT24C16 EEPROM
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <i2c.h>
-#ifdef CONFIG_SYS_EEPROM_AT24C16
-#undef DEBUG
-
-void eeprom_init(void)
-{
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-#endif
-}
-
-int eeprom_read(unsigned dev_addr, unsigned offset, uchar *buffer,
- unsigned cnt)
-{
- int page, count = 0, i = 0;
- page = offset / 0x100;
- i = offset % 0x100;
-
- while (count < cnt) {
- if (i2c_read(dev_addr|page, i++, 1, buffer+count++, 1) != 0)
- return 1;
- if (i > 0xff) {
- page++;
- i = 0;
- }
- }
-
- return 0;
-}
-
-/*
- * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
- * 0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
- *
- * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
- * 0x00000nxx for EEPROM address selectors and page number at n.
- */
-int eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer,
- unsigned cnt)
-{
- int page, i = 0, count = 0;
-
- page = offset / 0x100;
- i = offset % 0x100;
-
- while (count < cnt) {
- if (i2c_write(dev_addr|page, i++, 1, buffer+count++, 1) != 0)
- return 1;
- if (i > 0xff) {
- page++;
- i = 0;
- }
- }
-
-#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS)
- udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
-#endif
-
- return 0;
-}
-
-#ifndef CONFIG_SPI
-int eeprom_probe(unsigned dev_addr, unsigned offset)
-{
- unsigned char chip;
-
- /* Probe the chip address */
-#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
- chip = offset >> 8; /* block number */
-#else
- chip = offset >> 16; /* block number */
-#endif /* CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
-
- chip |= dev_addr; /* insert device address */
- return (i2c_probe(chip));
-}
-#endif
-#endif
diff --git a/board/m501sk/m501sk.c b/board/m501sk/m501sk.c
deleted file mode 100644
index c995768..0000000
--- a/board/m501sk/m501sk.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * (C) Copyright 2008
- * Based on modifications by Alan Lu / Artila
- * Author : Timo Tuunainen / Sysart
- Kimmo Leppala / Sysart
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <netdev.h>
-#if defined(CONFIG_DRIVER_ETHER)
-#include <at91rm9200_net.h>
-#include <dm9161.h>
-#endif
-
-#include "m501sk.h"
-#include "net.h"
-
-#ifdef CONFIG_M501SK
-
-void m501sk_gpio_init(void)
-{
- AT91C_BASE_PIOD->PIO_PER = 1 << (M501SK_DEBUG_LED1 - 96) |
- 1 << (M501SK_DEBUG_LED2 - 96) | 1 << (M501SK_DEBUG_LED3 - 96) |
- 1 << (M501SK_DEBUG_LED4 - 96) | 1 << (M501SK_READY_LED - 96);
-
- AT91C_BASE_PIOD->PIO_OER = 1 << (M501SK_DEBUG_LED1 - 96) |
- 1 << (M501SK_DEBUG_LED2 - 96) | 1 << (M501SK_DEBUG_LED3 - 96) |
- 1 << (M501SK_DEBUG_LED4 - 96) | 1 << (M501SK_READY_LED - 96);
-
- AT91C_BASE_PIOD->PIO_SODR = 1 << (M501SK_READY_LED - 96);
- AT91C_BASE_PIOD->PIO_CODR = 1 << (M501SK_DEBUG_LED3 - 96);
- AT91C_BASE_PIOB->PIO_PER = 1 << (M501SK_BUZZER - 32);
- AT91C_BASE_PIOB->PIO_OER = 1 << (M501SK_BUZZER - 32);
- AT91C_BASE_PIOC->PIO_PDR = (1 << 7) | (1 << 8);
-
- /* Power OFF all USART's LEDs */
- AT91C_BASE_PIOA->PIO_PER = AT91C_PA5_TXD3 | AT91C_PA6_RXD3 |
- AT91C_PA17_TXD0 | AT91C_PA18_RXD0 | AT91C_PA22_RXD2 | \
- AT91C_PA23_TXD2;
-
- AT91C_BASE_PIOA->PIO_OER = AT91C_PA5_TXD3 | AT91C_PA6_RXD3 |
- AT91C_PA17_TXD0 | AT91C_PA18_RXD0 | AT91C_PA22_RXD2 | \
- AT91C_PA23_TXD2;
-
- AT91C_BASE_PIOA->PIO_SODR = AT91C_PA5_TXD3 | AT91C_PA6_RXD3 |
- AT91C_PA17_TXD0 | AT91C_PA18_RXD0 | AT91C_PA22_RXD2 | \
- AT91C_PA23_TXD2;
-
- AT91C_BASE_PIOB->PIO_PER = AT91C_PB20_RXD1 | AT91C_PB21_TXD1;
- AT91C_BASE_PIOB->PIO_OER = AT91C_PB20_RXD1 | AT91C_PB21_TXD1;
- AT91C_BASE_PIOB->PIO_SODR = AT91C_PB20_RXD1 | AT91C_PB21_TXD1;
-}
-
-uchar m501sk_gpio_set(M501SK_PIO io)
-{
- uchar status = 0xff;
- switch (io) {
- case M501SK_DEBUG_LED1:
- case M501SK_DEBUG_LED2:
- case M501SK_DEBUG_LED3:
- case M501SK_DEBUG_LED4:
- case M501SK_READY_LED:
- AT91C_BASE_PIOD->PIO_SODR = 1 << (io - 96);
- status = AT91C_BASE_PIOD->PIO_ODSR & (1 << (io - 96));
- break;
- case M501SK_BUZZER:
- AT91C_BASE_PIOB->PIO_SODR = 1 << (io - 32);
- status = AT91C_BASE_PIOB->PIO_ODSR & (1 << (io - 32));
- break;
- }
- return status;
-}
-
-uchar m501sk_gpio_clear(M501SK_PIO io)
-{
- uchar status = 0xff;
- switch (io) {
- case M501SK_DEBUG_LED1:
- case M501SK_DEBUG_LED2:
- case M501SK_DEBUG_LED3:
- case M501SK_DEBUG_LED4:
- case M501SK_READY_LED:
- AT91C_BASE_PIOD->PIO_CODR = 1 << (io - 96);
- status = AT91C_BASE_PIOD->PIO_ODSR & (1 << (io - 96));
- break;
- case M501SK_BUZZER:
- AT91C_BASE_PIOB->PIO_CODR = 1 << (io - 32);
- status = AT91C_BASE_PIOB->PIO_ODSR & (1 << (io - 32));
- break;
- }
- return status;
-}
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
- /* Enable Ctrlc */
- console_init_f();
-
- /* Correct IRDA resistor problem */
- /* Set PA23_TXD in Output */
- ((AT91PS_PIO)AT91C_BASE_PIOA)->PIO_OER = AT91C_PA23_TXD2;
-
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
- gd->bd->bi_arch_number = MACH_TYPE_M501;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
- m501sk_gpio_init();
-
- /* Do interrupt init here, because flash needs timers */
- timer_init();
- flash_init();
-
- return 0;
-}
-
-int dram_init(void)
-{
- int i = 0;
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
-
- for (i = 0; i < 500; i++) {
- m501sk_gpio_clear(M501SK_DEBUG_LED3);
- m501sk_gpio_clear(M501SK_BUZZER);
- udelay(250);
- m501sk_gpio_set(M501SK_DEBUG_LED3);
- m501sk_gpio_set(M501SK_BUZZER);
- udelay(80);
- }
- m501sk_gpio_clear(M501SK_BUZZER);
- m501sk_gpio_clear(M501SK_DEBUG_LED3);
-
- return 0;
-}
-
-int board_late_init(void)
-{
-#if defined(CONFIG_CMD_NET)
- eth_init(gd->bd);
- eth_halt();
-#endif
-
- /* Protect U-Boot, kernel & ramdisk memory addresses */
- run_command("protect on 10000000 1041ffff", 0);
- return 0;
-}
-
-#ifdef CONFIG_DRIVER_ETHER
-#if defined(CONFIG_CMD_NET)
-/*
- * Name:
- * at91rm9200_GetPhyInterface
- * Description:
- * Initialise the interface functions to the PHY
- * Arguments:
- * None
- * Return value:
- * None
- */
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
-{
- p_phyops->Init = dm9161_InitPhy;
- p_phyops->IsPhyConnected = dm9161_IsPhyConnected;
- p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed;
- p_phyops->AutoNegotiate = dm9161_AutoNegotiate;
-}
-#endif /* CONFIG_CMD_NET */
-#endif /* CONFIG_DRIVER_ETHER */
-
-#ifdef CONFIG_DRIVER_AT91EMAC
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
- rc = at91emac_register(bis, 0);
- return rc;
-}
-#endif
-#endif /* CONFIG_M501SK */
diff --git a/board/m501sk/m501sk.h b/board/m501sk/m501sk.h
deleted file mode 100644
index 51d10f5..0000000
--- a/board/m501sk/m501sk.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * linux/include/asm/arch-at91/hardware.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __M501SK_H
-#define __M501SK_H
-
-#ifndef __ASSEMBLY__
-#include <asm/arch-at91rm9200/AT91RM9200.h>
-#else
-#include <asm/arch-at91rm9200/AT91RM9200_inc.h>
-#endif
-
-#define AT91C_PIO_PA22 ((unsigned int) 1 << 22) /* Pin Controlled by PA22 */
-#define AT91C_PA22_RXD2 ((unsigned int) AT91C_PIO_PA22) /* USART 2 RxD */
-#define AT91C_PA5_TXD3 ((unsigned int) 1 << 5) /* USART 3 TxD */
-#define AT91C_PA6_RXD3 ((unsigned int) 1 << 6) /* USART 3 RxD */
-
-/* ========== Register definition for PIOD peripheral ========== */
-#define AT91C_PIOD_PDSR ((AT91_REG *) 0xFFFFFA3C) /* Pin Data stat Reg */
-#define AT91C_PIOD_CODR ((AT91_REG *) 0xFFFFFA34) /* Clear Output Data Reg */
-#define AT91C_PIOD_OWER ((AT91_REG *) 0xFFFFFAA0) /* Output Write Enable Reg */
-#define AT91C_PIOD_MDER ((AT91_REG *) 0xFFFFFA50) /* Multi-driver Enable Reg */
-#define AT91C_PIOD_IMR ((AT91_REG *) 0xFFFFFA48) /* Interrupt Mask Reg */
-#define AT91C_PIOD_IER ((AT91_REG *) 0xFFFFFA40) /* Interrupt Enable Reg */
-#define AT91C_PIOD_ODSR ((AT91_REG *) 0xFFFFFA38) /* Output Data stat Reg */
-#define AT91C_PIOD_SODR ((AT91_REG *) 0xFFFFFA30) /* Set Output Data Reg */
-#define AT91C_PIOD_PER ((AT91_REG *) 0xFFFFFA00) /* PIO Enable Reg */
-#define AT91C_PIOD_OWDR ((AT91_REG *) 0xFFFFFAA4) /* Output Write Disable Reg */
-#define AT91C_PIOD_PPUER ((AT91_REG *) 0xFFFFFA64) /* Pull-up Enable Reg */
-#define AT91C_PIOD_MDDR ((AT91_REG *) 0xFFFFFA54) /* Multi-driver Disable Reg */
-#define AT91C_PIOD_ISR ((AT91_REG *) 0xFFFFFA4C) /* Interrupt stat Reg */
-#define AT91C_PIOD_IDR ((AT91_REG *) 0xFFFFFA44) /* Interrupt Disable Reg */
-#define AT91C_PIOD_PDR ((AT91_REG *) 0xFFFFFA04) /* PIO Disable Reg */
-#define AT91C_PIOD_ODR ((AT91_REG *) 0xFFFFFA14) /* Output Disable Regr */
-#define AT91C_PIOD_OWSR ((AT91_REG *) 0xFFFFFAA8) /* Output Write stat Reg */
-#define AT91C_PIOD_ABSR ((AT91_REG *) 0xFFFFFA78) /* AB Select stat Reg */
-#define AT91C_PIOD_ASR ((AT91_REG *) 0xFFFFFA70) /* Select A Reg */
-#define AT91C_PIOD_PPUSR ((AT91_REG *) 0xFFFFFA68) /* Pad Pull-up stat Reg */
-#define AT91C_PIOD_PPUDR ((AT91_REG *) 0xFFFFFA60) /* Pull-up Disable Reg */
-#define AT91C_PIOD_MDSR ((AT91_REG *) 0xFFFFFA58) /* Multi-driver stat Reg */
-#define AT91C_PIOD_PSR ((AT91_REG *) 0xFFFFFA08) /* PIO stat Reg */
-#define AT91C_PIOD_OER ((AT91_REG *) 0xFFFFFA10) /* Output Enable Reg */
-#define AT91C_PIOD_OSR ((AT91_REG *) 0xFFFFFA18) /* Output stat Reg */
-#define AT91C_PIOD_IFER ((AT91_REG *) 0xFFFFFA20) /* Input Filter Enable Reg */
-#define AT91C_PIOD_BSR ((AT91_REG *) 0xFFFFFA74) /* Select B Reg */
-#define AT91C_PIOD_IFDR ((AT91_REG *) 0xFFFFFA24) /* Input Filter Disable Reg */
-#define AT91C_PIOD_IFSR ((AT91_REG *) 0xFFFFFA28) /* Input Filter stat Reg */
-
-#define AT91C_PIO_PD0 ((unsigned int) 1 << 0) /* Pin Controlled by PD0 */
-#define AT91C_PD0_ETX0 ((unsigned int) AT91C_PIO_PD0) /* Enet MAC Tx Data 0*/
-#define AT91C_PIO_PD1 ((unsigned int) 1 << 1) /* Pin Controlled by PD1 */
-#define AT91C_PD1_ETX1 ((unsigned int) AT91C_PIO_PD1) /* Enet MAC Tx Data 1*/
-#define AT91C_PIO_PD10 ((unsigned int) 1 << 10) /* Pin Controlled by PD10 */
-#define AT91C_PD10_PCK3 ((unsigned int) AT91C_PIO_PD10) /* PMC Prog Clk Oput 3*/
-#define AT91C_PD10_TPS1 ((unsigned int) AT91C_PIO_PD10) /* ETMARM9 pl stat1 */
-#define AT91C_PIO_PD11 ((unsigned int) 1 << 11) /* Pin Controlled by PD11 */
-#define AT91C_PD11_ ((unsigned int) AT91C_PIO_PD11) /* */
-#define AT91C_PD11_TPS2 ((unsigned int) AT91C_PIO_PD11) /* ETMARM9 pl stat2 */
-#define AT91C_PIO_PD12 ((unsigned int) 1 << 12) /* Pin Controlled by PD12 */
-#define AT91C_PD12_ ((unsigned int) AT91C_PIO_PD12) /* */
-#define AT91C_PD12_TPK0 ((unsigned int) AT91C_PIO_PD12) /* ETM Trace Pkt 0 */
-#define AT91C_PIO_PD13 ((unsigned int) 1 << 13) /* Pin Controlled by PD13 */
-#define AT91C_PD13_ ((unsigned int) AT91C_PIO_PD13) /* */
-#define AT91C_PD13_TPK1 ((unsigned int) AT91C_PIO_PD13) /* ETM Trace Pkt 1 */
-#define AT91C_PIO_PD14 ((unsigned int) 1 << 14) /* Pin Controlled by PD14 */
-#define AT91C_PD14_ ((unsigned int) AT91C_PIO_PD14) /* */
-#define AT91C_PD14_TPK2 ((unsigned int) AT91C_PIO_PD14) /* ETM Trace Pkt 2 */
-#define AT91C_PIO_PD15 ((unsigned int) 1 << 15) /* Pin Controlled by PD15 */
-#define AT91C_PD15_TD0 ((unsigned int) AT91C_PIO_PD15) /* SSC TxD */
-#define AT91C_PD15_TPK3 ((unsigned int) AT91C_PIO_PD15) /* ETM Trace Pkt 3 */
-#define AT91C_PIO_PD16 ((unsigned int) 1 << 16) /* Pin Controlled by PD16 */
-#define AT91C_PD16_TD1 ((unsigned int) AT91C_PIO_PD16) /* SSC TxD 1 */
-#define AT91C_PD16_TPK4 ((unsigned int) AT91C_PIO_PD16) /* ETM Trace Pkt 4 */
-#define AT91C_PIO_PD17 ((unsigned int) 1 << 17) /* Pin Controlled by PD17 */
-#define AT91C_PD17_TD2 ((unsigned int) AT91C_PIO_PD17) /* SSC TxD 2 */
-#define AT91C_PD17_TPK5 ((unsigned int) AT91C_PIO_PD17) /* ETM Trace Pkt 5 */
-#define AT91C_PIO_PD18 ((unsigned int) 1 << 18) /* Pin Controlled by PD18 */
-#define AT91C_PD18_NPCS1 ((unsigned int) AT91C_PIO_PD18) /* SPI Perip CS 1 */
-#define AT91C_PD18_TPK6 ((unsigned int) AT91C_PIO_PD18) /* ETM Trace Pkt 6 */
-#define AT91C_PIO_PD19 ((unsigned int) 1 << 19) /* Pin Controlled by PD19 */
-#define AT91C_PD19_NPCS2 ((unsigned int) AT91C_PIO_PD19) /* SPI Perip CS 2 */
-#define AT91C_PD19_TPK7 ((unsigned int) AT91C_PIO_PD19) /* ETM Trace Pkt 7 */
-#define AT91C_PIO_PD2 ((unsigned int) 1 << 2) /* Pin Controlled by PD2 */
-#define AT91C_PD2_ETX2 ((unsigned int) AT91C_PIO_PD2) /* Ethernet MAC TxD 2 */
-#define AT91C_PIO_PD20 ((unsigned int) 1 << 20) /* Pin Controlled by PD20 */
-#define AT91C_PD20_NPCS3 ((unsigned int) AT91C_PIO_PD20) /* SPI Perip CS 3 */
-#define AT91C_PD20_TPK8 ((unsigned int) AT91C_PIO_PD20) /* ETM Trace Pkt 8 */
-#define AT91C_PIO_PD21 ((unsigned int) 1 << 21) /* Pin Controlled by PD21 */
-#define AT91C_PD21_RTS0 ((unsigned int) AT91C_PIO_PD21) /* Usart 0 RTS */
-#define AT91C_PD21_TPK9 ((unsigned int) AT91C_PIO_PD21) /* ETM Trace Pkt 9 */
-#define AT91C_PIO_PD22 ((unsigned int) 1 << 22) /* Pin Controlled by PD22 */
-#define AT91C_PD22_RTS1 ((unsigned int) AT91C_PIO_PD22) /* Usart 0 RTS */
-#define AT91C_PD22_TPK10 ((unsigned int) AT91C_PIO_PD22) /* ETM Trace Pkt 10 */
-#define AT91C_PIO_PD23 ((unsigned int) 1 << 23) /* Pin Controlled by PD23 */
-#define AT91C_PD23_RTS2 ((unsigned int) AT91C_PIO_PD23) /* USART 2 RTS */
-#define AT91C_PD23_TPK11 ((unsigned int) AT91C_PIO_PD23) /* ETM Trace Pkt 11 */
-#define AT91C_PIO_PD24 ((unsigned int) 1 << 24) /* Pin Controlled by PD24 */
-#define AT91C_PD24_RTS3 ((unsigned int) AT91C_PIO_PD24) /* USART 3 RTS */
-#define AT91C_PD24_TPK12 ((unsigned int) AT91C_PIO_PD24) /* ETM Trace Pkt 12 */
-#define AT91C_PIO_PD25 ((unsigned int) 1 << 25) /* Pin Controlled by PD25 */
-#define AT91C_PD25_DTR1 ((unsigned int) AT91C_PIO_PD25) /* USART 1 DTR */
-#define AT91C_PD25_TPK13 ((unsigned int) AT91C_PIO_PD25) /* ETM Trace Pkt 13 */
-#define AT91C_PIO_PD26 ((unsigned int) 1 << 26) /* Pin Controlled by PD26 */
-#define AT91C_PD26_TPK14 ((unsigned int) AT91C_PIO_PD26) /* ETM Trace Pkt 14 */
-#define AT91C_PIO_PD27 ((unsigned int) 1 << 27) /* Pin Controlled by PD27 */
-#define AT91C_PD27_TPK15 ((unsigned int) AT91C_PIO_PD27) /* ETM Trace Pkt 15 */
-#define AT91C_PIO_PD3 ((unsigned int) 1 << 3) /* Pin Controlled by PD3 */
-#define AT91C_PD3_ETX3 ((unsigned int) AT91C_PIO_PD3) /* Enet MAC TxD 3 */
-#define AT91C_PIO_PD4 ((unsigned int) 1 << 4) /* Pin Controlled by PD4 */
-#define AT91C_PD4_ETXEN ((unsigned int) AT91C_PIO_PD4) /* Enet MAC TxEn */
-#define AT91C_PIO_PD5 ((unsigned int) 1 << 5) /* Pin Controlled by PD5 */
-#define AT91C_PD5_ETXER ((unsigned int) AT91C_PIO_PD5) /* Enet MAC TxCE */
-#define AT91C_PIO_PD6 ((unsigned int) 1 << 6) /* Pin Controlled by PD6 */
-#define AT91C_PD6_DTXD ((unsigned int) AT91C_PIO_PD6) /* DBGU Debug TxD */
-#define AT91C_PIO_PD7 ((unsigned int) 1 << 7) /* Pin Controlled by PD7 */
-#define AT91C_PD7_PCK0 ((unsigned int) AT91C_PIO_PD7) /* PMC Prog Clk Oput 0*/
-#define AT91C_PD7_TSYNC ((unsigned int) AT91C_PIO_PD7) /* ETM Sync signal */
-#define AT91C_PIO_PD8 ((unsigned int) 1 << 8) /* Pin Controlled by PD8 */
-#define AT91C_PD8_PCK1 ((unsigned int) AT91C_PIO_PD8) /* PMC Prog Clk Oput 1*/
-#define AT91C_PD8_TCLK ((unsigned int) AT91C_PIO_PD8) /* ETM Trace Clk sig */
-#define AT91C_PIO_PD9 ((unsigned int) 1 << 9) /* Pin Controlled by PD9 */
-#define AT91C_PD9_PCK2 ((unsigned int) AT91C_PIO_PD9) /* PMC Prog Clk 2 */
-#define AT91C_PD9_TPS0 ((unsigned int) AT91C_PIO_PD9) /* ETM ARM9 pl stat0 */
-#define AT91C_PIO_PB6 ((unsigned int) 1 << 6) /* Pin Controlled by PB6 */
-#define AT91C_PIO_PC5 ((unsigned int) 1 << 5)
-#define AT91C_PIO_PC14 ((unsigned int) 1 << 14) /* Pin Controlled by PC1 */
-#define AT91C_PIO_PC15 ((unsigned int) 1 << 15) /* Pin Controlled by PC1 */
-#define AT91C_PIO_PA19 ((unsigned int) 1 << 19) /* Pin Controlled by PC1 */
-#define AT91C_PIO_PB2 ((unsigned int) 1 << 2) /* Pin Controlled by PC1 */
-#define AT91C_PIO_PB8 ((unsigned int) 1 << 8)
-#define AT91C_PIO_PB9 ((unsigned int) 1 << 9)
-#define AT91C_PIO_PB10 ((unsigned int) 1 << 10)
-#define AT91C_PIO_PB11 ((unsigned int) 1 << 11)
-#define AT91C_PIO_PB17 ((unsigned int) 1 << 17)
-#define AT91C_PIO_PB28 ((unsigned int) 1 << 28)
-#define AT91C_PIO_PB29 ((unsigned int) 1 << 29)
-
-typedef enum {
- M501SK_BUZZER = 38,
- M501SK_DEBUG_LED1 = 96,
- M501SK_DEBUG_LED2,
- M501SK_DEBUG_LED3,
- M501SK_DEBUG_LED4,
- M501SK_READY_LED = 102,
-} M501SK_PIO;
-
-void m501sk_gpio_init(void);
-uchar m501sk_gpio_set(M501SK_PIO io);
-uchar m501sk_gpio_clear(M501SK_PIO io);
-
-#endif
diff --git a/boards.cfg b/boards.cfg
index ae3c093..e684d73 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -57,7 +57,6 @@ at91rm9200ek_ram arm arm920t at91rm9200ek atmel
eb_cpux9k2 arm arm920t - BuS at91
cpuat91 arm arm920t cpuat91 eukrea at91 cpuat91
cpuat91_ram arm arm920t cpuat91 eukrea at91 cpuat91:RAMBOOT
-m501sk arm arm920t - - at91rm9200
at91rm9200dk arm arm920t - atmel at91rm9200
mx1ads arm arm920t - - imx
scb9328 arm arm920t - - imx
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 24233a0..104430d 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+m501sk arm arm920t - 2011-07-17
kb9202 arm arm920t - 2011-07-17
csb637 arm arm920t - 2011-07-17
cmc_pu2 arm arm920t - 2011-07-17
diff --git a/include/configs/m501sk.h b/include/configs/m501sk.h
deleted file mode 100644
index 68f0415..0000000
--- a/include/configs/m501sk.h
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * Based on Modifications by Alan Lu / Artila and
- * Rick Bronson <rick@efn.org>
- *
- * Configuration settings for the Artila M-501 starter kit,
- * with V02 processor card.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-/* from 18.432 MHz crystal (18432000 / 4 * 39) */
-#define AT91C_MAIN_CLOCK 179712000
-/* Perip clock (AT91C_MASTER_CLOCK / 3) */
-#define AT91C_MASTER_CLOCK 59904000
-#define AT91_SLOW_CLOCK 32768 /* slow clock */
-
-#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
-#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_MENUPROMPT "."
-/*
- * LowLevel Init
- */
-#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
-/* flash */
-#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000
-#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
-
-/* clocks */
-#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */
-#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-/* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
-#define CONFIG_SYS_MCKR_VAL 0x00000202
-
-/* sdram */
-#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000
-#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000
-#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
-#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
-#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
-#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */
-#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_BAUDRATE 115200
-
-/* Hardcode so no __divsi3 : AT91C_MASTER_CLOCK / baudrate / 16 */
-#define CONFIG_SYS_AT91C_BRGR_DIVISOR 33
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define CONFIG_ENV_SECT_SIZE 0x20000
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-#define CONFIG_SYS_FLASH_PROTECTION /*for Intel P30 Flash*/
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100
-#define CONFIG_SYS_I2C_SLAVE 0
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-#undef CONFIG_ENV_IS_IN_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_EEPROM_AT24C16
-#define CONFIG_SYS_I2C_RTC_ADDR 0x32
-#undef CONFIG_RTC_DS1338
-#define CONFIG_RTC_RS5C372A
-#undef CONFIG_POST
-#define CONFIG_M501SK
-#define CONFIG_CMC_PU2
-
-/* define one of these to choose the DBGU, USART0 or USART1 as console */
-#define CONFIG_AT91RM9200_USART
-#define CONFIG_DBGU
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-
-#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
-#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
-
-#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200 " \
- "initrd=0x20800000,8192000 ramdisk_size=15360 " \
- "root=/dev/ram0 rw mtdparts=phys_mapped_flash:" \
- "128k(loader)ro,128k(reserved)ro,1408k(linux)" \
- "ro,2560k(ramdisk)ro,-(userdisk)"
-#define CONFIG_BOOTCOMMAND "bootm 10040000 101a0000"
-#define CONFIG_BOOTDELAY 1
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_IPADDR 192.168.1.100
-#define CONFIG_SERVERIP 192.168.1.1
-#define CONFIG_GATEWAYIP 192.168.1.254
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_BOOTFILE uImage
-#define CONFIG_ETHADDR 00:13:48:aa:bb:cc
-#define CONFIG_ENV_OVERWRITE 1
-#define BOARD_LATE_INIT
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "unlock=yes\0"
-
-#define CONFIG_CMD_JFFS2
-#undef CONFIG_CMD_EEPROM
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_POST
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_SAVEENV
-
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_PROMPT_HUSH_PS2 ">>"
-
-#define CONFIG_SYS_MAX_NAND_DEVICE 0 /* Max number of NAND devices */
-
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */
-
-#define CONFIG_SYS_MEMTEST_START 0x21000000 /* PHYS_SDRAM */
-/* CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 */
-#define CONFIG_SYS_MEMTEST_END 0x00100000
-
-#define CONFIG_NET_MULTI 1
-#ifdef CONFIG_NET_MULTI
-#define CONFIG_DRIVER_AT91EMAC 1
-#define CONFIG_SYS_RX_ETH_BUFFER 8
-#else
-#define CONFIG_DRIVER_ETHER 1
-#endif
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_AT91C_USE_RMII
-
-#define PHYS_FLASH_1 0x10000000
-#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#ifdef CONFIG_ENV_IS_IN_DATAFLASH
-#define CONFIG_ENV_OFFSET 0x20000
-#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x2000
-#else
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x00020000)
-#define CONFIG_ENV_SIZE 2048
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_EEPROM
-#define CONFIG_ENV_OFFSET 1024
-#define CONFIG_ENV_SIZE 1024
-#endif
-
-#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
-
-/* use for protect flash sectors */
-#define CONFIG_SYS_BOOT_SIZE 0x6000 /* 24 KBytes */
-#define CONFIG_SYS_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000)
-#define CONFIG_SYS_U_BOOT_SIZE 0x10000 /* 64 KBytes */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200 , 19200, 38400, 57600, 9600 }
-
-#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2
-
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif
--
1.7.6
^ permalink raw reply related [flat|nested] 35+ messages in thread* [U-Boot] [PATCH v2 16/16] ARM: remove broken "at91rm9200dk" board
2011-08-26 12:25 ` [U-Boot] [PATCH v2 00/16] " Wolfgang Denk
` (14 preceding siblings ...)
2011-08-26 12:25 ` [U-Boot] [PATCH v2 15/16] ARM: remove broken "m501sk" board Wolfgang Denk
@ 2011-08-26 12:25 ` Wolfgang Denk
15 siblings, 0 replies; 35+ messages in thread
From: Wolfgang Denk @ 2011-08-26 12:25 UTC (permalink / raw)
To: u-boot
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
board/atmel/at91rm9200dk/Makefile | 56 ----
board/atmel/at91rm9200dk/at91rm9200dk.c | 167 ----------
board/atmel/at91rm9200dk/config.mk | 1 -
board/atmel/at91rm9200dk/flash.c | 504 -------------------------------
board/atmel/at91rm9200dk/led.c | 80 -----
board/atmel/at91rm9200dk/mux.c | 29 --
board/atmel/at91rm9200dk/partition.c | 40 ---
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/at91rm9200dk.h | 202 ------------
10 files changed, 1 insertions(+), 1080 deletions(-)
delete mode 100644 board/atmel/at91rm9200dk/Makefile
delete mode 100644 board/atmel/at91rm9200dk/at91rm9200dk.c
delete mode 100644 board/atmel/at91rm9200dk/config.mk
delete mode 100644 board/atmel/at91rm9200dk/flash.c
delete mode 100644 board/atmel/at91rm9200dk/led.c
delete mode 100644 board/atmel/at91rm9200dk/mux.c
delete mode 100644 board/atmel/at91rm9200dk/partition.c
delete mode 100644 include/configs/at91rm9200dk.h
diff --git a/board/atmel/at91rm9200dk/Makefile b/board/atmel/at91rm9200dk/Makefile
deleted file mode 100644
index bc3dbc6..0000000
--- a/board/atmel/at91rm9200dk/Makefile
+++ /dev/null
@@ -1,56 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS-y += $(BOARD).o
-COBJS-y += flash.o
-COBJS-y += led.o
-ifdef CONFIG_HAS_DATAFLASH
-COBJS-$(CONFIG_DATAFLASH_MMC_SELECT) += mux.o
-COBJS-y += partition.o
-endif
-
-SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS-y))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/atmel/at91rm9200dk/at91rm9200dk.c b/board/atmel/at91rm9200dk/at91rm9200dk.c
deleted file mode 100644
index 49b5fe3..0000000
--- a/board/atmel/at91rm9200dk/at91rm9200dk.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <exports.h>
-#include <netdev.h>
-#include <asm/arch/AT91RM9200.h>
-#include <asm/io.h>
-
-#if defined(CONFIG_DRIVER_ETHER)
-#include <at91rm9200_net.h>
-#include <dm9161.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* Enable Ctrlc */
- console_init_f ();
-
- /* Correct IRDA resistor problem */
- /* Set PA23_TXD in Output */
- ((AT91PS_PIO) AT91C_BASE_PIOA)->PIO_OER = AT91C_PA23_TXD2;
-
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
-
- /* arch number of AT91RM9200DK-Board */
- gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200DK;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- return 0;
-}
-
-void board_reset (void)
-{
- AT91PS_PIO pio = AT91C_BASE_PIOA;
-
- /* Clear PA19 to trigger the hard reset */
- writel(0x00080000, pio->PIO_CODR);
- writel(0x00080000, pio->PIO_OER);
- writel(0x00080000, pio->PIO_PER);
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
-}
-
-#ifdef CONFIG_DRIVER_ETHER
-#if defined(CONFIG_CMD_NET)
-
-/*
- * Name:
- * at91rm9200_GetPhyInterface
- * Description:
- * Initialise the interface functions to the PHY
- * Arguments:
- * None
- * Return value:
- * None
- */
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
-{
- p_phyops->Init = dm9161_InitPhy;
- p_phyops->IsPhyConnected = dm9161_IsPhyConnected;
- p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed;
- p_phyops->AutoNegotiate = dm9161_AutoNegotiate;
-}
-
-#endif
-#endif /* CONFIG_DRIVER_ETHER */
-
-#ifdef CONFIG_DRIVER_AT91EMAC
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
- rc = at91emac_register(bis, 0);
- return rc;
-}
-#endif
-
-/*
- * Disk On Chip (NAND) Millenium initialization.
- * The NAND lives in the CS2* space
- */
-#if defined(CONFIG_CMD_NAND)
-extern ulong nand_probe (ulong physadr);
-
-#define AT91_SMARTMEDIA_BASE 0x40000000 /* physical address to access memory on NCS3 */
-void nand_init (void)
-{
- /* Setup Smart Media, fitst enable the address range of CS3 */
- *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia;
- /* set the bus interface characteristics based on
- tDS Data Set up Time 30 - ns
- tDH Data Hold Time 20 - ns
- tALS ALE Set up Time 20 - ns
- 16ns at 60 MHz ~= 3 */
-/*memory mapping structures */
-#define SM_ID_RWH (5 << 28)
-#define SM_RWH (1 << 28)
-#define SM_RWS (0 << 24)
-#define SM_TDF (1 << 8)
-#define SM_NWS (3)
- AT91C_BASE_SMC2->SMC2_CSR[3] = (SM_RWH | SM_RWS |
- AT91C_SMC2_ACSS_STANDARD | AT91C_SMC2_DBW_8 |
- SM_TDF | AT91C_SMC2_WSEN | SM_NWS);
-
- /* enable the SMOE line PC0=SMCE, A21=CLE, A22=ALE */
- *AT91C_PIOC_ASR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
- AT91C_PC3_BFBAA_SMWE;
- *AT91C_PIOC_PDR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
- AT91C_PC3_BFBAA_SMWE;
-
- /* Configure PC2 as input (signal READY of the SmartMedia) */
- *AT91C_PIOC_PER = AT91C_PC2_BFAVD; /* enable direct output enable */
- *AT91C_PIOC_ODR = AT91C_PC2_BFAVD; /* disable output */
-
- /* Configure PB1 as input (signal Card Detect of the SmartMedia) */
- *AT91C_PIOB_PER = AT91C_PIO_PB1; /* enable direct output enable */
- *AT91C_PIOB_ODR = AT91C_PIO_PB1; /* disable output */
-
- /* PIOB and PIOC clock enabling */
- *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB;
- *AT91C_PMC_PCER = 1 << AT91C_ID_PIOC;
-
- if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1)
- printf (" No SmartMedia card inserted\n");
-#ifdef DEBUG
- printf (" SmartMedia card inserted\n");
-
- printf ("Probing@0x%.8x\n", AT91_SMARTMEDIA_BASE);
-#endif
- printf ("%4lu MB\n", nand_probe(AT91_SMARTMEDIA_BASE) >> 20);
-}
-#endif
diff --git a/board/atmel/at91rm9200dk/config.mk b/board/atmel/at91rm9200dk/config.mk
deleted file mode 100644
index 2077692..0000000
--- a/board/atmel/at91rm9200dk/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21f00000
diff --git a/board/atmel/at91rm9200dk/flash.c b/board/atmel/at91rm9200dk/flash.c
deleted file mode 100644
index be22743..0000000
--- a/board/atmel/at91rm9200dk/flash.c
+++ /dev/null
@@ -1,504 +0,0 @@
-/*
- * (C) Copyright 2002
- * Lineo, Inc. <www.lineo.com>
- * Bernhard Kuhn <bkuhn@lineo.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-ulong myflush(void);
-
-
-/* Flash Organization Structure */
-typedef struct OrgDef
-{
- unsigned int sector_number;
- unsigned int sector_size;
-} OrgDef;
-
-
-/* Flash Organizations */
-OrgDef OrgAT49BV16x4[] =
-{
- { 8, 8*1024 }, /* 8 * 8 kBytes sectors */
- { 2, 32*1024 }, /* 2 * 32 kBytes sectors */
- { 30, 64*1024 }, /* 30 * 64 kBytes sectors */
-};
-
-OrgDef OrgAT49BV16x4A[] =
-{
- { 8, 8*1024 }, /* 8 * 8 kBytes sectors */
- { 31, 64*1024 }, /* 31 * 64 kBytes sectors */
-};
-
-OrgDef OrgAT49BV6416[] =
-{
- { 8, 8*1024 }, /* 8 * 8 kBytes sectors */
- { 127, 64*1024 }, /* 127 * 64 kBytes sectors */
-};
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-/* AT49BV1614A Codes */
-#define FLASH_CODE1 0xAA
-#define FLASH_CODE2 0x55
-#define ID_IN_CODE 0x90
-#define ID_OUT_CODE 0xF0
-
-
-#define CMD_READ_ARRAY 0x00F0
-#define CMD_UNLOCK1 0x00AA
-#define CMD_UNLOCK2 0x0055
-#define CMD_ERASE_SETUP 0x0080
-#define CMD_ERASE_CONFIRM 0x0030
-#define CMD_PROGRAM 0x00A0
-#define CMD_UNLOCK_BYPASS 0x0020
-#define CMD_SECTOR_UNLOCK 0x0070
-
-#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00005555<<1)))
-#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00002AAA<<1)))
-
-#define BIT_ERASE_DONE 0x0080
-#define BIT_RDY_MASK 0x0080
-#define BIT_PROGRAM_ERROR 0x0020
-#define BIT_TIMEOUT 0x80000000 /* our flag */
-
-#define READY 1
-#define ERR 2
-#define TMO 4
-
-/*-----------------------------------------------------------------------
- */
-void flash_identification (flash_info_t * info)
-{
- volatile u16 manuf_code, device_code, add_device_code;
-
- MEM_FLASH_ADDR1 = FLASH_CODE1;
- MEM_FLASH_ADDR2 = FLASH_CODE2;
- MEM_FLASH_ADDR1 = ID_IN_CODE;
-
- manuf_code = *(volatile u16 *) CONFIG_SYS_FLASH_BASE;
- device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + 2);
- add_device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + (3 << 1));
-
- MEM_FLASH_ADDR1 = FLASH_CODE1;
- MEM_FLASH_ADDR2 = FLASH_CODE2;
- MEM_FLASH_ADDR1 = ID_OUT_CODE;
-
- /* Vendor type */
- info->flash_id = ATM_MANUFACT & FLASH_VENDMASK;
- printf ("Atmel: ");
-
- if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV1614 & FLASH_TYPEMASK)) {
-
- if ((add_device_code & FLASH_TYPEMASK) ==
- (ATM_ID_BV1614A & FLASH_TYPEMASK)) {
- info->flash_id |= ATM_ID_BV1614A & FLASH_TYPEMASK;
- printf ("AT49BV1614A (16Mbit)\n");
- } else { /* AT49BV1614 Flash */
- info->flash_id |= ATM_ID_BV1614 & FLASH_TYPEMASK;
- printf ("AT49BV1614 (16Mbit)\n");
- }
-
- } else if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV6416 & FLASH_TYPEMASK)) {
- info->flash_id |= ATM_ID_BV6416 & FLASH_TYPEMASK;
- printf ("AT49BV6416 (64Mbit)\n");
- }
-}
-
-ushort flash_number_sector(OrgDef *pOrgDef, unsigned int nb_blocks)
-{
- int i, nb_sectors = 0;
-
- for (i=0; i<nb_blocks; i++){
- nb_sectors += pOrgDef[i].sector_number;
- }
-
- return nb_sectors;
-}
-
-void flash_unlock_sector(flash_info_t * info, unsigned int sector)
-{
- volatile u16 *addr = (volatile u16 *) (info->start[sector]);
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- *addr = CMD_SECTOR_UNLOCK;
-}
-
-
-ulong flash_init (void)
-{
- int i, j, k;
- unsigned int flash_nb_blocks, sector;
- unsigned int start_address;
- OrgDef *pOrgDef;
-
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
-
- flash_identification (&flash_info[i]);
-
- if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
- (ATM_ID_BV1614 & FLASH_TYPEMASK)) {
-
- pOrgDef = OrgAT49BV16x4;
- flash_nb_blocks = sizeof (OrgAT49BV16x4) / sizeof (OrgDef);
- } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
- (ATM_ID_BV1614A & FLASH_TYPEMASK)){ /* AT49BV1614A Flash */
-
- pOrgDef = OrgAT49BV16x4A;
- flash_nb_blocks = sizeof (OrgAT49BV16x4A) / sizeof (OrgDef);
- } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
- (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */
-
- pOrgDef = OrgAT49BV6416;
- flash_nb_blocks = sizeof (OrgAT49BV6416) / sizeof (OrgDef);
- } else {
- flash_nb_blocks = 0;
- pOrgDef = OrgAT49BV16x4;
- }
-
- flash_info[i].sector_count = flash_number_sector(pOrgDef, flash_nb_blocks);
- memset (flash_info[i].protect, 0, flash_info[i].sector_count);
-
- if (i == 0)
- flashbase = PHYS_FLASH_1;
- else
- panic ("configured too many flash banks!\n");
-
- sector = 0;
- start_address = flashbase;
- flash_info[i].size = 0;
-
- for (j = 0; j < flash_nb_blocks; j++) {
- for (k = 0; k < pOrgDef[j].sector_number; k++) {
- flash_info[i].start[sector++] = start_address;
- start_address += pOrgDef[j].sector_size;
- flash_info[i].size += pOrgDef[j].sector_size;
- }
- }
-
- size += flash_info[i].size;
-
- if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
- (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */
-
- /* Unlock all sectors@reset */
- for (j=0; j<flash_info[i].sector_count; j++){
- flash_unlock_sector(&flash_info[i], j);
- }
- }
- }
-
- /* Protect binary boot image */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + CONFIG_SYS_BOOT_SIZE - 1, &flash_info[0]);
-
- /* Protect environment variables */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
- /* Protect U-Boot gzipped image */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_U_BOOT_BASE,
- CONFIG_SYS_U_BOOT_BASE + CONFIG_SYS_U_BOOT_SIZE - 1, &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (ATM_MANUFACT & FLASH_VENDMASK):
- printf ("Atmel: ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (ATM_ID_BV1614 & FLASH_TYPEMASK):
- printf ("AT49BV1614 (16Mbit)\n");
- break;
- case (ATM_ID_BV1614A & FLASH_TYPEMASK):
- printf ("AT49BV1614A (16Mbit)\n");
- break;
- case (ATM_ID_BV6416 & FLASH_TYPEMASK):
- printf ("AT49BV6416 (64Mbit)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- return;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- ulong result;
- int iflag, cflag, prot, sect;
- int rc = ERR_OK;
- int chip1;
- ulong start;
-
- /* first look for protection bits */
-
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
-
- if ((s_first < 0) || (s_first > s_last)) {
- return ERR_INVAL;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (ATM_MANUFACT & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
- if (prot)
- return ERR_PROTECTED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- cflag = icache_status ();
- icache_disable ();
- iflag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
- printf ("Erasing sector %2d ... ", sect);
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- if (info->protect[sect] == 0) { /* not protected */
- volatile u16 *addr = (volatile u16 *) (info->start[sect]);
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- *addr = CMD_ERASE_CONFIRM;
-
- /* wait until flash is ready */
- chip1 = 0;
-
- do {
- result = *addr;
-
- /* check timeout */
- if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
- chip1 = TMO;
- break;
- }
-
- if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE)
- chip1 = READY;
-
- } while (!chip1);
-
- MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-
- if (chip1 == ERR) {
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- if (chip1 == TMO) {
- rc = ERR_TIMOUT;
- goto outahere;
- }
-
- printf ("ok.\n");
- } else { /* it was protected */
- printf ("protected!\n");
- }
- }
-
- if (ctrlc ())
- printf ("User Interrupt!\n");
-
-outahere:
- /* allow flash to settle - wait 10 ms */
- udelay_masked (10000);
-
- if (iflag)
- enable_interrupts ();
-
- if (cflag)
- icache_enable ();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
- volatile u16 *addr = (volatile u16 *) dest;
- ulong result;
- int rc = ERR_OK;
- int cflag, iflag;
- int chip1;
- ulong start;
-
- /*
- * Check if Flash is (sufficiently) erased
- */
- result = *addr;
- if ((result & data) != data)
- return ERR_NOT_ERASED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- cflag = icache_status ();
- icache_disable ();
- iflag = disable_interrupts ();
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- MEM_FLASH_ADDR1 = CMD_PROGRAM;
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- /* wait until flash is ready */
- chip1 = 0;
- do {
- result = *addr;
-
- /* check timeout */
- if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- chip1 = ERR | TMO;
- break;
- }
- if (!chip1 && ((result & 0x80) == (data & 0x80)))
- chip1 = READY;
-
- } while (!chip1);
-
- *addr = CMD_READ_ARRAY;
-
- if (chip1 == ERR || *addr != data)
- rc = ERR_PROG_ERROR;
-
- if (iflag)
- enable_interrupts ();
-
- if (cflag)
- icache_enable ();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong wp, data;
- int rc;
-
- if (addr & 1) {
- printf ("unaligned destination not supported\n");
- return ERR_ALIGN;
- };
-
- if ((int) src & 1) {
- printf ("unaligned source not supported\n");
- return ERR_ALIGN;
- };
-
- wp = addr;
-
- while (cnt >= 2) {
- data = *((volatile u16 *) src);
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- src += 2;
- wp += 2;
- cnt -= 2;
- }
-
- if (cnt == 1) {
- data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) <<
- 8);
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- src += 1;
- wp += 1;
- cnt -= 1;
- };
-
- return ERR_OK;
-}
diff --git a/board/atmel/at91rm9200dk/led.c b/board/atmel/at91rm9200dk/led.c
deleted file mode 100644
index 47a3bfc..0000000
--- a/board/atmel/at91rm9200dk/led.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * (C) Copyright 2006
- * Atmel Nordic AB <www.atmel.com>
- * Ulf Samuelsson <ulf@atmel.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/AT91RM9200.h>
-
-#define GREEN_LED AT91C_PIO_PB0
-#define YELLOW_LED AT91C_PIO_PB1
-#define RED_LED AT91C_PIO_PB2
-
-void green_LED_on(void)
-{
- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
- PIOB->PIO_CODR = GREEN_LED;
-}
-
-void yellow_LED_on(void)
-{
- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
- PIOB->PIO_CODR = YELLOW_LED;
-}
-
-void red_LED_on(void)
-{
- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
- PIOB->PIO_CODR = RED_LED;
-}
-
-void green_LED_off(void)
-{
- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
- PIOB->PIO_SODR = GREEN_LED;
-}
-
-void yellow_LED_off(void)
-{
- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
- PIOB->PIO_SODR = YELLOW_LED;
-}
-
-void red_LED_off(void)
-{
- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
- PIOB->PIO_SODR = RED_LED;
-}
-
-
-void coloured_LED_init (void)
-{
- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
- AT91PS_PMC PMC = AT91C_BASE_PMC;
- PMC->PMC_PCER = (1 << AT91C_ID_PIOB); /* Enable PIOB clock */
- /* Disable peripherals on LEDs */
- PIOB->PIO_PER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
- /* Enable pins as outputs */
- PIOB->PIO_OER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
- /* Turn all LEDs OFF */
- PIOB->PIO_SODR = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
-}
diff --git a/board/atmel/at91rm9200dk/mux.c b/board/atmel/at91rm9200dk/mux.c
deleted file mode 100644
index a00563e..0000000
--- a/board/atmel/at91rm9200dk/mux.c
+++ /dev/null
@@ -1,29 +0,0 @@
-#include <config.h>
-#include <common.h>
-#include <asm/hardware.h>
-#include <dataflash.h>
-
-int AT91F_GetMuxStatus(void) {
- AT91C_BASE_PIOB->PIO_PER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Set in PIO mode */
- AT91C_BASE_PIOB->PIO_OER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Configure in output */
-
-
- if(AT91C_BASE_PIOB->PIO_ODSR & CONFIG_SYS_DATAFLASH_MMC_PIO)
- return 1;
-
- return 0;
-}
-
-void AT91F_SelectMMC(void) {
- AT91C_BASE_PIOB->PIO_PER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Set in PIO mode */
- AT91C_BASE_PIOB->PIO_OER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Configure in output */
- /* Set Output */
- AT91C_BASE_PIOB->PIO_SODR = CONFIG_SYS_DATAFLASH_MMC_PIO;
-}
-
-void AT91F_SelectSPI(void) {
- AT91C_BASE_PIOB->PIO_PER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Set in PIO mode */
- AT91C_BASE_PIOB->PIO_OER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Configure in output */
- /* Clear Output */
- AT91C_BASE_PIOB->PIO_CODR = CONFIG_SYS_DATAFLASH_MMC_PIO;
-}
diff --git a/board/atmel/at91rm9200dk/partition.c b/board/atmel/at91rm9200dk/partition.c
deleted file mode 100644
index c739b11..0000000
--- a/board/atmel/at91rm9200dk/partition.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ulf Samuelsson <ulf@atmel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-#include <common.h>
-#include <config.h>
-#include <asm/hardware.h>
-#include <dataflash.h>
-
-AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-
-struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
- {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
- {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3, 3}
-};
-
-/*define the area offsets*/
-dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
- {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
- {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
- {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
- {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
- {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
-};
diff --git a/boards.cfg b/boards.cfg
index e684d73..f72deb3 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -57,7 +57,6 @@ at91rm9200ek_ram arm arm920t at91rm9200ek atmel
eb_cpux9k2 arm arm920t - BuS at91
cpuat91 arm arm920t cpuat91 eukrea at91 cpuat91
cpuat91_ram arm arm920t cpuat91 eukrea at91 cpuat91:RAMBOOT
-at91rm9200dk arm arm920t - atmel at91rm9200
mx1ads arm arm920t - - imx
scb9328 arm arm920t - - imx
cm4008 arm arm920t - - ks8695
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 104430d..4c1e07a 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+at91rm9200dk arm arm920t - 2011-07-17
m501sk arm arm920t - 2011-07-17
kb9202 arm arm920t - 2011-07-17
csb637 arm arm920t - 2011-07-17
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
deleted file mode 100644
index 15de310..0000000
--- a/include/configs/at91rm9200dk.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * Rick Bronson <rick@efn.org>
- *
- * Configuration settings for the AT91RM9200DK board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */
-#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */
-/* #define AT91C_MASTER_CLOCK 44928000 */ /* peripheral clock (AT91C_MASTER_CLOCK / 4) */
-
-#define AT91_SLOW_CLOCK 32768 /* slow clock */
-
-#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
-#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define USE_920T_MMU 1
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
-/* flash */
-#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000
-#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
-
-/* clocks */
-#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */
-#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
-
-/* sdram */
-#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000
-#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000
-#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
-#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
-#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
-#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */
-#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_BAUDRATE 115200
-
-/*
- * Hardware drivers
- */
-
-/* define one of these to choose the DBGU, USART0 or USART1 as console */
-#define CONFIG_AT91RM9200_USART
-#define CONFIG_DBGU
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-
-#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
-
-#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
-
-#define CONFIG_BOOTDELAY 3
-/* #define CONFIG_ENV_OVERWRITE 1 */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-
-#include <asm/arch/AT91RM9200.h> /* needed for port definitions */
-
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
-
-#define CONFIG_NET_MULTI 1
-#ifdef CONFIG_NET_MULTI
-#define CONFIG_DRIVER_AT91EMAC 1
-#define CONFIG_SYS_RX_ETH_BUFFER 8
-#else
-#define CONFIG_DRIVER_ETHER 1
-#endif
-
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_AT91C_USE_RMII
-
-/* AC Characteristics */
-/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
-#define DATAFLASH_TCSS (0xC << 16)
-#define DATAFLASH_TCHS (0x1 << 24)
-
-#define CONFIG_HAS_DATAFLASH 1
-#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
-#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */
-
-#define PHYS_FLASH_1 0x10000000
-#define PHYS_FLASH_SIZE 0x200000 /* 2 megs main flash */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#undef CONFIG_ENV_IS_IN_DATAFLASH
-
-#ifdef CONFIG_ENV_IS_IN_DATAFLASH
-#define CONFIG_ENV_OFFSET 0x20000
-#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */
-#else
-#define CONFIG_ENV_IS_IN_FLASH 1
-#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* between boot.bin and u-boot.bin.gz */
-#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */
-#else
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */
-#define CONFIG_ENV_SIZE 0x10000 /* sectors are 64K here */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-#endif /* CONFIG_ENV_IS_IN_DATAFLASH */
-
-
-#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
-
-#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_BOOT_SIZE 0x6000 /* 24 KBytes */
-#define CONFIG_SYS_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000)
-#define CONFIG_SYS_U_BOOT_SIZE 0x10000 /* 64 KBytes */
-#else
-#define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */
-#define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1
-#define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 19200, 38400, 57600, 9600 }
-
-#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */
- /* AT91C_TC_TIMER_DIV1_CLOCK */
-
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif
--
1.7.6
^ permalink raw reply related [flat|nested] 35+ messages in thread