From: Ben Greear <greearb@candelatech.com> To: sandeep suresh <sandeep.suresh@yahoo.co.in> Cc: Adrian Chadd <adrian@freebsd.org>, ath9k-devel <ath9k-devel@venema.h4ckr.net>, "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org> Subject: Re: [ath9k-devel] AR9287; WiFi AP Mode - Increase interbeacon duration of 100ms Date: Mon, 03 Jun 2013 09:16:47 -0700 [thread overview] Message-ID: <51ACC16F.5030602@candelatech.com> (raw) In-Reply-To: <1370254531.75129.YahooMailNeo@web193504.mail.sg3.yahoo.com> On 06/03/2013 03:15 AM, sandeep suresh wrote: > Hello All, > Gentle reminder; really will be greatful, if you can give me some directions on this, Please. > Regards > Sandeep > > *From:* sandeep suresh <sandeep.suresh@yahoo.co.in> > *To:* Adrian Chadd <adrian@freebsd.org>; ath9k-devel <ath9k-devel@lists.ath9k.org> > *Cc:* "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org> > *Sent:* Monday, 27 May 2013 1:40 PM > *Subject:* AR9287; WiFi AP Mode - Increase interbeacon duration of 100ms > > Hello All, > This is regarding the inter beacon timing for AR9287 WiFi module when configured in WiFi Access Point mode. In this mode, the beacons are generated every > 100ms by the WiFi AP. I have the following questions: > 1. As per documentation available on the internet, the minimum inter beacon timing is 100ms. But can we increase the the inter beacon timing above this value? > say 250ms, 500ms etc > 2. As per standard, does increase in inter beacon time > 100ms, have any impact on the WiFi Clients connected to AR9287 WiFi AP? Even though I might test with > some WiFi clients without any side effects but there may be some WiFi clients (which I might be unaware of )that might not work. > 3. Has anyone attempted to do this? Please let me know if you have any observations on this? We have been using a default of 250ms beacon timer for years in our ath9k APs. Seems to work just fine, but we mostly use them for internal testing with other ath9k systems acting as the stations. Thanks, Ben > Thanks & regards > Sandeep > > > > > _______________________________________________ > ath9k-devel mailing list > ath9k-devel@lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel > -- Ben Greear <greearb@candelatech.com> Candela Technologies Inc http://www.candelatech.com
WARNING: multiple messages have this Message-ID (diff)
From: Ben Greear <greearb@candelatech.com> To: ath9k-devel@lists.ath9k.org Subject: [ath9k-devel] AR9287; WiFi AP Mode - Increase interbeacon duration of 100ms Date: Mon, 03 Jun 2013 09:16:47 -0700 [thread overview] Message-ID: <51ACC16F.5030602@candelatech.com> (raw) In-Reply-To: <1370254531.75129.YahooMailNeo@web193504.mail.sg3.yahoo.com> On 06/03/2013 03:15 AM, sandeep suresh wrote: > Hello All, > Gentle reminder; really will be greatful, if you can give me some directions on this, Please. > Regards > Sandeep > > *From:* sandeep suresh <sandeep.suresh@yahoo.co.in> > *To:* Adrian Chadd <adrian@freebsd.org>; ath9k-devel <ath9k-devel@lists.ath9k.org> > *Cc:* "linux-wireless at vger.kernel.org" <linux-wireless@vger.kernel.org> > *Sent:* Monday, 27 May 2013 1:40 PM > *Subject:* AR9287; WiFi AP Mode - Increase interbeacon duration of 100ms > > Hello All, > This is regarding the inter beacon timing for AR9287 WiFi module when configured in WiFi Access Point mode. In this mode, the beacons are generated every > 100ms by the WiFi AP. I have the following questions: > 1. As per documentation available on the internet, the minimum inter beacon timing is 100ms. But can we increase the the inter beacon timing above this value? > say 250ms, 500ms etc > 2. As per standard, does increase in inter beacon time > 100ms, have any impact on the WiFi Clients connected to AR9287 WiFi AP? Even though I might test with > some WiFi clients without any side effects but there may be some WiFi clients (which I might be unaware of )that might not work. > 3. Has anyone attempted to do this? Please let me know if you have any observations on this? We have been using a default of 250ms beacon timer for years in our ath9k APs. Seems to work just fine, but we mostly use them for internal testing with other ath9k systems acting as the stations. Thanks, Ben > Thanks & regards > Sandeep > > > > > _______________________________________________ > ath9k-devel mailing list > ath9k-devel at lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel > -- Ben Greear <greearb@candelatech.com> Candela Technologies Inc http://www.candelatech.com
next prev parent reply other threads:[~2013-06-03 16:17 UTC|newest] Thread overview: 100+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-03-15 0:10 Announcement: open source AR9380 and later HAL Adrian Chadd 2013-03-15 0:10 ` [ath9k-devel] " Adrian Chadd 2013-04-01 22:20 ` Nick Kossifidis 2013-04-01 22:20 ` [ath9k-devel] " Nick Kossifidis 2013-04-02 3:00 ` [ath9k-devel] Source code for Bluetooth AR3012 drivers sandeep suresh 2013-04-02 3:07 ` Adrian Chadd 2013-04-02 3:07 ` Adrian Chadd 2013-04-02 4:15 ` sandeep suresh 2013-04-02 11:57 ` [ath9k-devel] AR9287; mapping between GPIOs and COEX pins sandeep suresh 2013-04-02 14:53 ` Adrian Chadd 2013-04-02 14:53 ` [ath9k-devel] " Adrian Chadd 2013-04-02 15:20 ` sandeep suresh 2013-04-02 16:47 ` Adrian Chadd 2013-04-02 16:47 ` [ath9k-devel] " Adrian Chadd 2013-04-04 15:19 ` [ath9k-devel] AR9287 ; 2-wire coexistence expected behavior sandeep suresh 2013-04-04 18:06 ` Adrian Chadd 2013-04-04 18:06 ` [ath9k-devel] " Adrian Chadd 2013-04-05 3:08 ` sandeep suresh 2013-04-05 4:13 ` Adrian Chadd 2013-04-05 4:13 ` [ath9k-devel] " Adrian Chadd 2013-04-05 8:00 ` sandeep suresh 2013-04-05 8:17 ` Adrian Chadd 2013-04-05 8:17 ` [ath9k-devel] " Adrian Chadd 2013-04-05 9:06 ` sandeep suresh 2013-04-05 9:13 ` Adrian Chadd 2013-04-05 9:13 ` [ath9k-devel] " Adrian Chadd 2013-04-05 11:31 ` Sujith Manoharan 2013-04-05 11:31 ` Sujith Manoharan 2013-04-05 15:24 ` sandeep suresh 2013-04-05 16:41 ` Adrian Chadd 2013-04-05 16:41 ` Adrian Chadd 2013-04-05 17:37 ` Adrian Chadd 2013-04-05 17:37 ` Adrian Chadd 2013-04-05 22:36 ` Adrian Chadd 2013-04-05 22:36 ` Adrian Chadd 2013-04-07 14:54 ` sandeep suresh 2013-04-07 17:46 ` Adrian Chadd 2013-04-07 17:46 ` Adrian Chadd 2013-04-08 5:20 ` sandeep suresh 2013-04-08 8:58 ` Adrian Chadd 2013-04-08 8:58 ` Adrian Chadd 2013-04-08 9:00 ` Adrian Chadd 2013-04-08 9:00 ` Adrian Chadd 2013-04-08 9:39 ` sandeep suresh 2013-04-08 15:09 ` sandeep suresh 2013-04-08 18:39 ` Adrian Chadd 2013-04-08 18:39 ` Adrian Chadd 2013-04-09 23:00 ` Adrian Chadd 2013-04-09 23:00 ` Adrian Chadd 2013-04-10 2:37 ` sandeep suresh 2013-04-10 5:37 ` Adrian Chadd 2013-04-10 5:37 ` Adrian Chadd 2013-04-10 6:13 ` sandeep suresh 2013-04-10 7:22 ` Adrian Chadd 2013-04-10 7:22 ` Adrian Chadd 2013-04-15 7:53 ` sandeep suresh 2013-04-15 14:21 ` Adrian Chadd 2013-04-15 14:21 ` Adrian Chadd 2013-04-15 15:40 ` sandeep suresh 2013-04-15 15:44 ` sandeep suresh 2013-04-15 16:13 ` sandeep suresh 2013-04-15 17:45 ` Adrian Chadd 2013-04-15 17:45 ` Adrian Chadd 2013-04-16 3:16 ` sandeep suresh 2013-04-16 3:55 ` sandeep suresh 2013-04-16 17:00 ` Adrian Chadd 2013-04-16 17:00 ` Adrian Chadd 2013-04-17 10:33 ` sandeep suresh [not found] ` <CAJ-Vmokx0MbTC47+0fcRt9yQshfTaPEDte2A=7Ycn2bzwLSPxg@mail.gmail.com> [not found] ` <1366248389.18545.YahooMailNeo@web193503.mail.sg3.yahoo.com> [not found] ` <CAJ-VmomXz93U7HCmscd=NVZKQ+RFbty+Xh_wcOPYEDhX57ptbw@mail.gmail.com> [not found] ` <1366281249.7026.YahooMailNeo@web193504.mail.sg3.yahoo.com> 2013-04-18 14:16 ` Adrian Chadd 2013-04-18 14:16 ` Adrian Chadd 2013-05-21 6:40 ` sandeep suresh 2013-05-21 14:33 ` Adrian Chadd 2013-05-21 14:33 ` Adrian Chadd 2013-05-22 5:49 ` sandeep suresh 2013-06-25 6:09 ` sandeep suresh 2013-07-03 22:24 ` Kamran Nishat 2013-07-05 14:45 ` sandeep suresh 2014-02-07 14:48 ` [ath9k-devel] How to prepare a 802.11 channel map with energy using ATH9K sandeep suresh 2014-02-09 21:41 ` karl at aspodata.se 2014-02-11 3:09 ` sandeep suresh 2014-02-11 7:53 ` karl 2014-02-11 7:53 ` karl at aspodata.se 2014-02-26 16:46 ` Linux board that supports AR9287 and 7" display with ath9k support sandeep suresh 2014-02-26 16:46 ` [ath9k-devel] " sandeep suresh 2013-05-27 8:10 ` [ath9k-devel] AR9287; WiFi AP Mode - Increase interbeacon duration of 100ms sandeep suresh 2013-06-03 10:15 ` sandeep suresh 2013-06-03 16:16 ` Ben Greear [this message] 2013-06-03 16:16 ` Ben Greear 2013-06-04 10:36 ` sandeep suresh 2014-03-31 14:35 ` Impact of migration from compat wireless to backports sandeep suresh 2014-03-31 14:35 ` [ath9k-devel] " sandeep suresh 2014-04-04 1:55 ` Wifi client Bluetooth coexistence; non smooth video streams sandeep suresh 2014-04-04 1:55 ` [ath9k-devel] " sandeep suresh 2013-04-06 19:36 ` [ath9k-devel] AR9287 ; 2-wire coexistence expected behavior Sujith Manoharan 2013-04-06 19:36 ` Sujith Manoharan 2013-04-06 19:40 ` Sujith Manoharan 2013-04-06 19:40 ` Sujith Manoharan 2013-04-07 14:46 ` sandeep suresh 2013-04-04 22:27 ` Adrian Chadd 2013-04-05 2:55 ` sandeep suresh
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=51ACC16F.5030602@candelatech.com \ --to=greearb@candelatech.com \ --cc=adrian@freebsd.org \ --cc=ath9k-devel@venema.h4ckr.net \ --cc=linux-wireless@vger.kernel.org \ --cc=sandeep.suresh@yahoo.co.in \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.