From: Adrian Chadd <adrian@freebsd.org> To: sandeep suresh <sandeep.suresh@yahoo.co.in> Cc: Sujith Manoharan <sujith@msujith.org>, ath9k-devel <ath9k-devel@lists.ath9k.org>, "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org> Subject: Re: [ath9k-devel] AR9287 ; 2-wire coexistence expected behavior Date: Tue, 16 Apr 2013 10:00:12 -0700 [thread overview] Message-ID: <CAJ-Vmoki6FUETFLkThp1AvZ3R_2kCd5Ro83OuvsfW0nZ5pfJ2w@mail.gmail.com> (raw) In-Reply-To: <1366084534.24187.YahooMailNeo@web193501.mail.sg3.yahoo.com> On 15 April 2013 20:55, sandeep suresh <sandeep.suresh@yahoo.co.in> wrote: > Hello Mr.Adrian, > Got the debugfs working. I used the regdump under > "/sys/kernel/debug/ieee80211/phy0/ath9k". The following are the values: > ar5416phy.h:#define AR_BT_COEX_MODE 0x8170 Value is: > 0x050a5b00 How's that being set? it looks like you're enabling mode 2 (slotted) versus 2-wire or 3-wire. Look at the code and HAL definitions. You want 2-wire / legacy rx_clear mode for the _MODE_ field inside AR_BT_COEX_MODE. > ar5416phy.h:#define AR_BT_COEX_WEIGHT 0x8174 Value is: > 0xa8a8ff55 Double-check your weight values and make sure that they're actually -correct- for having BT stomp wifi in all instances. Adrian
WARNING: multiple messages have this Message-ID (diff)
From: Adrian Chadd <adrian@freebsd.org> To: ath9k-devel@lists.ath9k.org Subject: [ath9k-devel] AR9287 ; 2-wire coexistence expected behavior Date: Tue, 16 Apr 2013 10:00:12 -0700 [thread overview] Message-ID: <CAJ-Vmoki6FUETFLkThp1AvZ3R_2kCd5Ro83OuvsfW0nZ5pfJ2w@mail.gmail.com> (raw) In-Reply-To: <1366084534.24187.YahooMailNeo@web193501.mail.sg3.yahoo.com> On 15 April 2013 20:55, sandeep suresh <sandeep.suresh@yahoo.co.in> wrote: > Hello Mr.Adrian, > Got the debugfs working. I used the regdump under > "/sys/kernel/debug/ieee80211/phy0/ath9k". The following are the values: > ar5416phy.h:#define AR_BT_COEX_MODE 0x8170 Value is: > 0x050a5b00 How's that being set? it looks like you're enabling mode 2 (slotted) versus 2-wire or 3-wire. Look at the code and HAL definitions. You want 2-wire / legacy rx_clear mode for the _MODE_ field inside AR_BT_COEX_MODE. > ar5416phy.h:#define AR_BT_COEX_WEIGHT 0x8174 Value is: > 0xa8a8ff55 Double-check your weight values and make sure that they're actually -correct- for having BT stomp wifi in all instances. Adrian
next prev parent reply other threads:[~2013-04-16 17:00 UTC|newest] Thread overview: 100+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-03-15 0:10 Announcement: open source AR9380 and later HAL Adrian Chadd 2013-03-15 0:10 ` [ath9k-devel] " Adrian Chadd 2013-04-01 22:20 ` Nick Kossifidis 2013-04-01 22:20 ` [ath9k-devel] " Nick Kossifidis 2013-04-02 3:00 ` [ath9k-devel] Source code for Bluetooth AR3012 drivers sandeep suresh 2013-04-02 3:07 ` Adrian Chadd 2013-04-02 3:07 ` Adrian Chadd 2013-04-02 4:15 ` sandeep suresh 2013-04-02 11:57 ` [ath9k-devel] AR9287; mapping between GPIOs and COEX pins sandeep suresh 2013-04-02 14:53 ` Adrian Chadd 2013-04-02 14:53 ` [ath9k-devel] " Adrian Chadd 2013-04-02 15:20 ` sandeep suresh 2013-04-02 16:47 ` Adrian Chadd 2013-04-02 16:47 ` [ath9k-devel] " Adrian Chadd 2013-04-04 15:19 ` [ath9k-devel] AR9287 ; 2-wire coexistence expected behavior sandeep suresh 2013-04-04 18:06 ` Adrian Chadd 2013-04-04 18:06 ` [ath9k-devel] " Adrian Chadd 2013-04-05 3:08 ` sandeep suresh 2013-04-05 4:13 ` Adrian Chadd 2013-04-05 4:13 ` [ath9k-devel] " Adrian Chadd 2013-04-05 8:00 ` sandeep suresh 2013-04-05 8:17 ` Adrian Chadd 2013-04-05 8:17 ` [ath9k-devel] " Adrian Chadd 2013-04-05 9:06 ` sandeep suresh 2013-04-05 9:13 ` Adrian Chadd 2013-04-05 9:13 ` [ath9k-devel] " Adrian Chadd 2013-04-05 11:31 ` Sujith Manoharan 2013-04-05 11:31 ` Sujith Manoharan 2013-04-05 15:24 ` sandeep suresh 2013-04-05 16:41 ` Adrian Chadd 2013-04-05 16:41 ` Adrian Chadd 2013-04-05 17:37 ` Adrian Chadd 2013-04-05 17:37 ` Adrian Chadd 2013-04-05 22:36 ` Adrian Chadd 2013-04-05 22:36 ` Adrian Chadd 2013-04-07 14:54 ` sandeep suresh 2013-04-07 17:46 ` Adrian Chadd 2013-04-07 17:46 ` Adrian Chadd 2013-04-08 5:20 ` sandeep suresh 2013-04-08 8:58 ` Adrian Chadd 2013-04-08 8:58 ` Adrian Chadd 2013-04-08 9:00 ` Adrian Chadd 2013-04-08 9:00 ` Adrian Chadd 2013-04-08 9:39 ` sandeep suresh 2013-04-08 15:09 ` sandeep suresh 2013-04-08 18:39 ` Adrian Chadd 2013-04-08 18:39 ` Adrian Chadd 2013-04-09 23:00 ` Adrian Chadd 2013-04-09 23:00 ` Adrian Chadd 2013-04-10 2:37 ` sandeep suresh 2013-04-10 5:37 ` Adrian Chadd 2013-04-10 5:37 ` Adrian Chadd 2013-04-10 6:13 ` sandeep suresh 2013-04-10 7:22 ` Adrian Chadd 2013-04-10 7:22 ` Adrian Chadd 2013-04-15 7:53 ` sandeep suresh 2013-04-15 14:21 ` Adrian Chadd 2013-04-15 14:21 ` Adrian Chadd 2013-04-15 15:40 ` sandeep suresh 2013-04-15 15:44 ` sandeep suresh 2013-04-15 16:13 ` sandeep suresh 2013-04-15 17:45 ` Adrian Chadd 2013-04-15 17:45 ` Adrian Chadd 2013-04-16 3:16 ` sandeep suresh 2013-04-16 3:55 ` sandeep suresh 2013-04-16 17:00 ` Adrian Chadd [this message] 2013-04-16 17:00 ` Adrian Chadd 2013-04-17 10:33 ` sandeep suresh [not found] ` <CAJ-Vmokx0MbTC47+0fcRt9yQshfTaPEDte2A=7Ycn2bzwLSPxg@mail.gmail.com> [not found] ` <1366248389.18545.YahooMailNeo@web193503.mail.sg3.yahoo.com> [not found] ` <CAJ-VmomXz93U7HCmscd=NVZKQ+RFbty+Xh_wcOPYEDhX57ptbw@mail.gmail.com> [not found] ` <1366281249.7026.YahooMailNeo@web193504.mail.sg3.yahoo.com> 2013-04-18 14:16 ` Adrian Chadd 2013-04-18 14:16 ` Adrian Chadd 2013-05-21 6:40 ` sandeep suresh 2013-05-21 14:33 ` Adrian Chadd 2013-05-21 14:33 ` Adrian Chadd 2013-05-22 5:49 ` sandeep suresh 2013-06-25 6:09 ` sandeep suresh 2013-07-03 22:24 ` Kamran Nishat 2013-07-05 14:45 ` sandeep suresh 2014-02-07 14:48 ` [ath9k-devel] How to prepare a 802.11 channel map with energy using ATH9K sandeep suresh 2014-02-09 21:41 ` karl at aspodata.se 2014-02-11 3:09 ` sandeep suresh 2014-02-11 7:53 ` karl 2014-02-11 7:53 ` karl at aspodata.se 2014-02-26 16:46 ` Linux board that supports AR9287 and 7" display with ath9k support sandeep suresh 2014-02-26 16:46 ` [ath9k-devel] " sandeep suresh 2013-05-27 8:10 ` [ath9k-devel] AR9287; WiFi AP Mode - Increase interbeacon duration of 100ms sandeep suresh 2013-06-03 10:15 ` sandeep suresh 2013-06-03 16:16 ` Ben Greear 2013-06-03 16:16 ` Ben Greear 2013-06-04 10:36 ` sandeep suresh 2014-03-31 14:35 ` Impact of migration from compat wireless to backports sandeep suresh 2014-03-31 14:35 ` [ath9k-devel] " sandeep suresh 2014-04-04 1:55 ` Wifi client Bluetooth coexistence; non smooth video streams sandeep suresh 2014-04-04 1:55 ` [ath9k-devel] " sandeep suresh 2013-04-06 19:36 ` [ath9k-devel] AR9287 ; 2-wire coexistence expected behavior Sujith Manoharan 2013-04-06 19:36 ` Sujith Manoharan 2013-04-06 19:40 ` Sujith Manoharan 2013-04-06 19:40 ` Sujith Manoharan 2013-04-07 14:46 ` sandeep suresh 2013-04-04 22:27 ` Adrian Chadd 2013-04-05 2:55 ` sandeep suresh
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=CAJ-Vmoki6FUETFLkThp1AvZ3R_2kCd5Ro83OuvsfW0nZ5pfJ2w@mail.gmail.com \ --to=adrian@freebsd.org \ --cc=ath9k-devel@lists.ath9k.org \ --cc=linux-wireless@vger.kernel.org \ --cc=sandeep.suresh@yahoo.co.in \ --cc=sujith@msujith.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.