* [meta-freescale] how to install pulseaudio completely @ 2013-07-12 10:35 ` jojo 0 siblings, 0 replies; 14+ messages in thread From: jojo @ 2013-07-12 10:35 UTC (permalink / raw) To: meta-freescale; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 642 bytes --] Hi, My yocto version/tag is dylan. I have compiled fsl-image-gui to testing the the audio output, but i can not find anything about for pulseaudio server to start up daemon. I saw the build code in the path about for "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/" and it really have built all things of pulseaudio. but when i create the fsl-image-gui to start up, i just find "libpulse*" in the rootfs. I think that something wrong with pulseaudio configure so that it do not install completely by default. someone know about that how to install pulseaudio completely ? Thanks, - Jojo [-- Attachment #2: Type: text/html, Size: 1444 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* how to install pulseaudio completely @ 2013-07-12 10:35 ` jojo 0 siblings, 0 replies; 14+ messages in thread From: jojo @ 2013-07-12 10:35 UTC (permalink / raw) To: meta-freescale; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 642 bytes --] Hi, My yocto version/tag is dylan. I have compiled fsl-image-gui to testing the the audio output, but i can not find anything about for pulseaudio server to start up daemon. I saw the build code in the path about for "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/" and it really have built all things of pulseaudio. but when i create the fsl-image-gui to start up, i just find "libpulse*" in the rootfs. I think that something wrong with pulseaudio configure so that it do not install completely by default. someone know about that how to install pulseaudio completely ? Thanks, - Jojo [-- Attachment #2: Type: text/html, Size: 1444 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [meta-freescale] how to install pulseaudio completely 2013-07-12 10:35 ` jojo @ 2013-07-12 10:45 ` Erik Botö -1 siblings, 0 replies; 14+ messages in thread From: Erik Botö @ 2013-07-12 10:45 UTC (permalink / raw) To: jojo; +Cc: meta-freescale, yocto [-- Attachment #1: Type: text/plain, Size: 1080 bytes --] Hi, On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com> wrote: > Hi, > My yocto version/tag is dylan. > I have compiled fsl-image-gui to testing the the audio output, but i can > not find > anything about for pulseaudio server to start up daemon. > > I saw the build code in the path about for > "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/" > and it really have built all things of pulseaudio. but when i create the > fsl-image-gui to start up, i just find "libpulse*" in the > rootfs. > > I think that something wrong with pulseaudio configure so that it do not > install completely by default. > The pulseaudio daemon is packaged as pulseaudio-server, maybe the image doesn't install that package by default? Cheers, Erik Botö > someone know about that how to install pulseaudio completely ? > > Thanks, > > - Jojo > > > _______________________________________________ > meta-freescale mailing list > meta-freescale@yoctoproject.org > https://lists.yoctoproject.org/listinfo/meta-freescale > > [-- Attachment #2: Type: text/html, Size: 2341 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: how to install pulseaudio completely @ 2013-07-12 10:45 ` Erik Botö 0 siblings, 0 replies; 14+ messages in thread From: Erik Botö @ 2013-07-12 10:45 UTC (permalink / raw) To: jojo; +Cc: meta-freescale, yocto [-- Attachment #1: Type: text/plain, Size: 1080 bytes --] Hi, On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com> wrote: > Hi, > My yocto version/tag is dylan. > I have compiled fsl-image-gui to testing the the audio output, but i can > not find > anything about for pulseaudio server to start up daemon. > > I saw the build code in the path about for > "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/" > and it really have built all things of pulseaudio. but when i create the > fsl-image-gui to start up, i just find "libpulse*" in the > rootfs. > > I think that something wrong with pulseaudio configure so that it do not > install completely by default. > The pulseaudio daemon is packaged as pulseaudio-server, maybe the image doesn't install that package by default? Cheers, Erik Botö > someone know about that how to install pulseaudio completely ? > > Thanks, > > - Jojo > > > _______________________________________________ > meta-freescale mailing list > meta-freescale@yoctoproject.org > https://lists.yoctoproject.org/listinfo/meta-freescale > > [-- Attachment #2: Type: text/html, Size: 2341 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* 回复: meta-freescale] how to install pulseaudio completely 2013-07-12 10:45 ` Erik Botö @ 2013-07-16 15:32 ` jojo -1 siblings, 0 replies; 14+ messages in thread From: jojo @ 2013-07-16 15:32 UTC (permalink / raw) To: Erik Botö; +Cc: meta-freescale, yocto [-- Attachment #1: Type: text/plain, Size: 1387 bytes --] Hi, Ok & i will have a try, thanks for your reply :) Thanks, - Jojo 在 2013年7月12日星期五,下午6:45,Erik Botö 写道: > Hi, > On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com (mailto:rjiejie@gmail.com)> wrote: > > Hi, > > My yocto version/tag is dylan. > > > > I have compiled fsl-image-gui to testing the the audio output, but i can not find > > anything about for pulseaudio server to start up daemon. > > > > I saw the build code in the path about for "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/" > > and it really have built all things of pulseaudio. but when i create the fsl-image-gui to start up, i just find "libpulse*" in the > > rootfs. > > > > I think that something wrong with pulseaudio configure so that it do not install completely by default. > > The pulseaudio daemon is packaged as pulseaudio-server, maybe the image doesn't install that package by default? > > Cheers, > Erik Botö > > > > > someone know about that how to install pulseaudio completely ? > > > > Thanks, > > > > - Jojo > > > > > > _______________________________________________ > > meta-freescale mailing list > > meta-freescale@yoctoproject.org (mailto:meta-freescale@yoctoproject.org) > > https://lists.yoctoproject.org/listinfo/meta-freescale > > > [-- Attachment #2: Type: text/html, Size: 2959 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* 回复: how to install pulseaudio completely @ 2013-07-16 15:32 ` jojo 0 siblings, 0 replies; 14+ messages in thread From: jojo @ 2013-07-16 15:32 UTC (permalink / raw) To: Erik Botö; +Cc: meta-freescale, yocto [-- Attachment #1: Type: text/plain, Size: 1387 bytes --] Hi, Ok & i will have a try, thanks for your reply :) Thanks, - Jojo 在 2013年7月12日星期五,下午6:45,Erik Botö 写道: > Hi, > On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com (mailto:rjiejie@gmail.com)> wrote: > > Hi, > > My yocto version/tag is dylan. > > > > I have compiled fsl-image-gui to testing the the audio output, but i can not find > > anything about for pulseaudio server to start up daemon. > > > > I saw the build code in the path about for "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/" > > and it really have built all things of pulseaudio. but when i create the fsl-image-gui to start up, i just find "libpulse*" in the > > rootfs. > > > > I think that something wrong with pulseaudio configure so that it do not install completely by default. > > The pulseaudio daemon is packaged as pulseaudio-server, maybe the image doesn't install that package by default? > > Cheers, > Erik Botö > > > > > someone know about that how to install pulseaudio completely ? > > > > Thanks, > > > > - Jojo > > > > > > _______________________________________________ > > meta-freescale mailing list > > meta-freescale@yoctoproject.org (mailto:meta-freescale@yoctoproject.org) > > https://lists.yoctoproject.org/listinfo/meta-freescale > > > [-- Attachment #2: Type: text/html, Size: 2959 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* 回复: meta-freescale] how to install pulseaudio completely 2013-07-16 15:32 ` 回复: " jojo @ 2013-09-12 10:07 ` jojo -1 siblings, 0 replies; 14+ messages in thread From: jojo @ 2013-09-12 10:07 UTC (permalink / raw) To: Erik Botö; +Cc: meta-freescale, yocto [-- Attachment #1: Type: text/plain, Size: 1720 bytes --] Hi, I installed pulse audio server in IMX6QSD of FSL, but there is no output of audio with HDMI :( how to track the log of the pulse audio ? Thanks, - Jojo 在 2013年7月16日星期二,下午11:32,jojo 写道: > Hi, > Ok & i will have a try, thanks for your reply :) > > Thanks, > > - Jojo > > > 在 2013年7月12日星期五,下午6:45,Erik Botö 写道: > > > Hi, > > On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com (mailto:rjiejie@gmail.com)> wrote: > > > Hi, > > > My yocto version/tag is dylan. > > > > > > I have compiled fsl-image-gui to testing the the audio output, but i can not find > > > anything about for pulseaudio server to start up daemon. > > > > > > I saw the build code in the path about for "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/" > > > and it really have built all things of pulseaudio. but when i create the fsl-image-gui to start up, i just find "libpulse*" in the > > > rootfs. > > > > > > I think that something wrong with pulseaudio configure so that it do not install completely by default. > > > > The pulseaudio daemon is packaged as pulseaudio-server, maybe the image doesn't install that package by default? > > > > Cheers, > > Erik Botö > > > > > > > > someone know about that how to install pulseaudio completely ? > > > > > > Thanks, > > > > > > - Jojo > > > > > > > > > _______________________________________________ > > > meta-freescale mailing list > > > meta-freescale@yoctoproject.org (mailto:meta-freescale@yoctoproject.org) > > > https://lists.yoctoproject.org/listinfo/meta-freescale > > > > > > [-- Attachment #2: Type: text/html, Size: 3794 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* 回复: how to install pulseaudio completely @ 2013-09-12 10:07 ` jojo 0 siblings, 0 replies; 14+ messages in thread From: jojo @ 2013-09-12 10:07 UTC (permalink / raw) To: Erik Botö; +Cc: meta-freescale, yocto [-- Attachment #1: Type: text/plain, Size: 1720 bytes --] Hi, I installed pulse audio server in IMX6QSD of FSL, but there is no output of audio with HDMI :( how to track the log of the pulse audio ? Thanks, - Jojo 在 2013年7月16日星期二,下午11:32,jojo 写道: > Hi, > Ok & i will have a try, thanks for your reply :) > > Thanks, > > - Jojo > > > 在 2013年7月12日星期五,下午6:45,Erik Botö 写道: > > > Hi, > > On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com (mailto:rjiejie@gmail.com)> wrote: > > > Hi, > > > My yocto version/tag is dylan. > > > > > > I have compiled fsl-image-gui to testing the the audio output, but i can not find > > > anything about for pulseaudio server to start up daemon. > > > > > > I saw the build code in the path about for "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/" > > > and it really have built all things of pulseaudio. but when i create the fsl-image-gui to start up, i just find "libpulse*" in the > > > rootfs. > > > > > > I think that something wrong with pulseaudio configure so that it do not install completely by default. > > > > The pulseaudio daemon is packaged as pulseaudio-server, maybe the image doesn't install that package by default? > > > > Cheers, > > Erik Botö > > > > > > > > someone know about that how to install pulseaudio completely ? > > > > > > Thanks, > > > > > > - Jojo > > > > > > > > > _______________________________________________ > > > meta-freescale mailing list > > > meta-freescale@yoctoproject.org (mailto:meta-freescale@yoctoproject.org) > > > https://lists.yoctoproject.org/listinfo/meta-freescale > > > > > > [-- Attachment #2: Type: text/html, Size: 3794 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [meta-freescale] 回复: how to install pulseaudio completely 2013-09-12 10:07 ` 回复: " jojo @ 2013-09-12 11:29 ` Daiane Angolini -1 siblings, 0 replies; 14+ messages in thread From: Daiane Angolini @ 2013-09-12 11:29 UTC (permalink / raw) To: jojo; +Cc: meta-freescale, yocto On 09/12/2013 07:07 AM, jojo wrote: > Hi, Hi Jojo, > I installed pulse audio server in IMX6QSD of FSL, but there is no output > of audio with HDMI :( Please, double check if pulseaudio is in your DISTRO_FEATURES (i think it's default, but I cannot remember exactly) bitbake -e | grep ^DISTRO_FEATURES How are you configuring HDMI audio? I know there is a doc in imx-community with the audio configuration if you want to change it from default to HDMI. > > how to track the log of the pulse audio ? > > Thanks, > > - Jojo > > 在 2013年7月16日星期二,下午11:32,jojo 写道: > >> Hi, >> Ok & i will have a try, thanks for your reply :) >> >> Thanks, >> >> - Jojo >> >> 在 2013年7月12日星期五,下午6:45,Erik Botö 写道: >> >>> Hi, >>> On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com >>> <mailto:rjiejie@gmail.com>> wrote: >>>> Hi, >>>> My yocto version/tag is dylan. >>>> I have compiled fsl-image-gui to testing the the audio output, but i >>>> can not find >>>> anything about for pulseaudio server to start up daemon. >>>> >>>> I saw the build code in the path about for >>>> "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/" >>>> and it really have built all things of pulseaudio. but when i create >>>> the fsl-image-gui to start up, i just find "libpulse*" in the >>>> rootfs. >>>> >>>> I think that something wrong with pulseaudio configure so that it do >>>> not install completely by default. >>> >>> The pulseaudio daemon is packaged as pulseaudio-server, maybe the >>> image doesn't install that package by default? >>> Cheers, >>> Erik Botö >>> >>>> >>>> someone know about that how to install pulseaudio completely ? >>>> >>>> Thanks, >>>> >>>> - Jojo >>>> >>>> >>>> _______________________________________________ >>>> meta-freescale mailing list >>>> meta-freescale@yoctoproject.org <mailto:meta-freescale@yoctoproject.org> >>>> https://lists.yoctoproject.org/listinfo/meta-freescale >>>> >>> >> > > > > _______________________________________________ > meta-freescale mailing list > meta-freescale@yoctoproject.org > https://lists.yoctoproject.org/listinfo/meta-freescale > -- Daiane ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: 回复: how to install pulseaudio completely @ 2013-09-12 11:29 ` Daiane Angolini 0 siblings, 0 replies; 14+ messages in thread From: Daiane Angolini @ 2013-09-12 11:29 UTC (permalink / raw) To: jojo; +Cc: meta-freescale, yocto On 09/12/2013 07:07 AM, jojo wrote: > Hi, Hi Jojo, > I installed pulse audio server in IMX6QSD of FSL, but there is no output > of audio with HDMI :( Please, double check if pulseaudio is in your DISTRO_FEATURES (i think it's default, but I cannot remember exactly) bitbake -e | grep ^DISTRO_FEATURES How are you configuring HDMI audio? I know there is a doc in imx-community with the audio configuration if you want to change it from default to HDMI. > > how to track the log of the pulse audio ? > > Thanks, > > - Jojo > > 在 2013年7月16日星期二,下午11:32,jojo 写道: > >> Hi, >> Ok & i will have a try, thanks for your reply :) >> >> Thanks, >> >> - Jojo >> >> 在 2013年7月12日星期五,下午6:45,Erik Botö 写道: >> >>> Hi, >>> On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com >>> <mailto:rjiejie@gmail.com>> wrote: >>>> Hi, >>>> My yocto version/tag is dylan. >>>> I have compiled fsl-image-gui to testing the the audio output, but i >>>> can not find >>>> anything about for pulseaudio server to start up daemon. >>>> >>>> I saw the build code in the path about for >>>> "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/" >>>> and it really have built all things of pulseaudio. but when i create >>>> the fsl-image-gui to start up, i just find "libpulse*" in the >>>> rootfs. >>>> >>>> I think that something wrong with pulseaudio configure so that it do >>>> not install completely by default. >>> >>> The pulseaudio daemon is packaged as pulseaudio-server, maybe the >>> image doesn't install that package by default? >>> Cheers, >>> Erik Botö >>> >>>> >>>> someone know about that how to install pulseaudio completely ? >>>> >>>> Thanks, >>>> >>>> - Jojo >>>> >>>> >>>> _______________________________________________ >>>> meta-freescale mailing list >>>> meta-freescale@yoctoproject.org <mailto:meta-freescale@yoctoproject.org> >>>> https://lists.yoctoproject.org/listinfo/meta-freescale >>>> >>> >> > > > > _______________________________________________ > meta-freescale mailing list > meta-freescale@yoctoproject.org > https://lists.yoctoproject.org/listinfo/meta-freescale > -- Daiane ^ permalink raw reply [flat|nested] 14+ messages in thread
* 回复: meta-freescale] 回复: ow to install pulseaudio completely 2013-09-12 11:29 ` Daiane Angolini @ 2013-09-16 8:02 ` jojo -1 siblings, 0 replies; 14+ messages in thread From: jojo @ 2013-09-16 8:02 UTC (permalink / raw) To: Daiane Angolini; +Cc: meta-freescale, yocto [-- Attachment #1: Type: text/plain, Size: 5996 bytes --] Hi, I need to install the "pulseaudio-server" really & start up pulseaudio in daemon mode, hdmi output is ok :) bitbake -e | grep ^DISTRO_FEATURES DISTRO_FEATURES="alsa argp bluetooth ext2 irda largefile pcmcia usbgadget usbhost wifi xattr nfs zeroconf pci 3g nfc x11 ipv4 ipv6 libc-backtrace libc-big-macros libc-bsd libc-cxx-tests libc-catgets libc-charsets libc-crypt libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt libc-fmtmsg libc-fstab libc-ftraverse libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big libc-locales libc-locale-code libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug libc-spawn libc-streams libc-sunrpc libc-utmp libc-utmpx libc-wordexp libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc libc-posix-wchar-io pulseaudio sysvinit largefile opengl multiarch wayland" DISTRO_FEATURES_LIBC_class-nativesdk="ipv4 ipv6 libc-backtrace libc-big-macros libc-bsd libc-cxx-tests libc-catgets libc-charsets libc-crypt libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt libc-fmtmsg libc-fstab libc-ftraverse libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big libc-locales libc-locale-code libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug libc-spawn libc-streams libc-sunrpc libc-utmp libc-utmpx libc-wordexp libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc libc-posix-wchar-io" DISTRO_FEATURES_BACKFILL="pulseaudio sysvinit" DISTRO_FEATURES_LIBC="ipv4 ipv6 libc-backtrace libc-big-macros libc-bsd libc-cxx-tests libc-catgets libc-charsets libc-crypt libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt libc-fmtmsg libc-fstab libc-ftraverse libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big libc-locales libc-locale-code libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug libc-spawn libc-streams libc-sunrpc libc-utmp libc-utmpx libc-wordexp libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc libc-posix-wchar-io" DISTRO_FEATURES_LIBC_DEFAULT="ipv4 ipv6 libc-backtrace libc-big-macros libc-bsd libc-cxx-tests libc-catgets libc-charsets libc-crypt libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt libc-fmtmsg libc-fstab libc-ftraverse libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big libc-locales libc-locale-code libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug libc-spawn libc-streams libc-sunrpc libc-utmp libc-utmpx libc-wordexp libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc libc-posix-wchar-io" Thanks, - Jojo 在 2013年9月12日星期四,下午7:29,Daiane Angolini 写道: > On 09/12/2013 07:07 AM, jojo wrote: > > Hi, > > > Hi Jojo, > > > I installed pulse audio server in IMX6QSD of FSL, but there is no output > > of audio with HDMI :( > > > > > Please, double check if pulseaudio is in your DISTRO_FEATURES (i think > it's default, but I cannot remember exactly) > > bitbake -e | grep ^DISTRO_FEATURES > > How are you configuring HDMI audio? I know there is a doc in > imx-community with the audio configuration if you want to change it from > default to HDMI. > > > > > > how to track the log of the pulse audio ? > > > > Thanks, > > > > - Jojo > > > > 在 2013年7月16日星期二,下午11:32,jojo 写道: > > > > > Hi, > > > Ok & i will have a try, thanks for your reply :) > > > > > > Thanks, > > > > > > - Jojo > > > > > > 在 2013年7月12日星期五,下午6:45,Erik Botö 写道: > > > > > > > Hi, > > > > On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com (mailto:rjiejie@gmail.com) > > > > <mailto:rjiejie@gmail.com>> wrote: > > > > > Hi, > > > > > My yocto version/tag is dylan. > > > > > I have compiled fsl-image-gui to testing the the audio output, but i > > > > > can not find > > > > > anything about for pulseaudio server to start up daemon. > > > > > > > > > > I saw the build code in the path about for > > > > > "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/" > > > > > and it really have built all things of pulseaudio. but when i create > > > > > the fsl-image-gui to start up, i just find "libpulse*" in the > > > > > rootfs. > > > > > > > > > > I think that something wrong with pulseaudio configure so that it do > > > > > not install completely by default. > > > > > > > > > > > > > > > > > The pulseaudio daemon is packaged as pulseaudio-server, maybe the > > > > image doesn't install that package by default? > > > > Cheers, > > > > Erik Botö > > > > > > > > > > > > > > someone know about that how to install pulseaudio completely ? > > > > > > > > > > Thanks, > > > > > > > > > > - Jojo > > > > > > > > > > > > > > > _______________________________________________ > > > > > meta-freescale mailing list > > > > > meta-freescale@yoctoproject.org <mailto:meta-freescale@yoctoproject.org> > > > > > https://lists.yoctoproject.org/listinfo/meta-freescale > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > meta-freescale mailing list > > meta-freescale@yoctoproject.org (mailto:meta-freescale@yoctoproject.org) > > https://lists.yoctoproject.org/listinfo/meta-freescale > > > > > > -- > Daiane > > [-- Attachment #2: Type: text/html, Size: 9271 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* 回复: 回复: ow to install pulseaudio completely @ 2013-09-16 8:02 ` jojo 0 siblings, 0 replies; 14+ messages in thread From: jojo @ 2013-09-16 8:02 UTC (permalink / raw) To: Daiane Angolini; +Cc: meta-freescale, yocto [-- Attachment #1: Type: text/plain, Size: 5996 bytes --] Hi, I need to install the "pulseaudio-server" really & start up pulseaudio in daemon mode, hdmi output is ok :) bitbake -e | grep ^DISTRO_FEATURES DISTRO_FEATURES="alsa argp bluetooth ext2 irda largefile pcmcia usbgadget usbhost wifi xattr nfs zeroconf pci 3g nfc x11 ipv4 ipv6 libc-backtrace libc-big-macros libc-bsd libc-cxx-tests libc-catgets libc-charsets libc-crypt libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt libc-fmtmsg libc-fstab libc-ftraverse libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big libc-locales libc-locale-code libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug libc-spawn libc-streams libc-sunrpc libc-utmp libc-utmpx libc-wordexp libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc libc-posix-wchar-io pulseaudio sysvinit largefile opengl multiarch wayland" DISTRO_FEATURES_LIBC_class-nativesdk="ipv4 ipv6 libc-backtrace libc-big-macros libc-bsd libc-cxx-tests libc-catgets libc-charsets libc-crypt libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt libc-fmtmsg libc-fstab libc-ftraverse libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big libc-locales libc-locale-code libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug libc-spawn libc-streams libc-sunrpc libc-utmp libc-utmpx libc-wordexp libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc libc-posix-wchar-io" DISTRO_FEATURES_BACKFILL="pulseaudio sysvinit" DISTRO_FEATURES_LIBC="ipv4 ipv6 libc-backtrace libc-big-macros libc-bsd libc-cxx-tests libc-catgets libc-charsets libc-crypt libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt libc-fmtmsg libc-fstab libc-ftraverse libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big libc-locales libc-locale-code libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug libc-spawn libc-streams libc-sunrpc libc-utmp libc-utmpx libc-wordexp libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc libc-posix-wchar-io" DISTRO_FEATURES_LIBC_DEFAULT="ipv4 ipv6 libc-backtrace libc-big-macros libc-bsd libc-cxx-tests libc-catgets libc-charsets libc-crypt libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt libc-fmtmsg libc-fstab libc-ftraverse libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big libc-locales libc-locale-code libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug libc-spawn libc-streams libc-sunrpc libc-utmp libc-utmpx libc-wordexp libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc libc-posix-wchar-io" Thanks, - Jojo 在 2013年9月12日星期四,下午7:29,Daiane Angolini 写道: > On 09/12/2013 07:07 AM, jojo wrote: > > Hi, > > > Hi Jojo, > > > I installed pulse audio server in IMX6QSD of FSL, but there is no output > > of audio with HDMI :( > > > > > Please, double check if pulseaudio is in your DISTRO_FEATURES (i think > it's default, but I cannot remember exactly) > > bitbake -e | grep ^DISTRO_FEATURES > > How are you configuring HDMI audio? I know there is a doc in > imx-community with the audio configuration if you want to change it from > default to HDMI. > > > > > > how to track the log of the pulse audio ? > > > > Thanks, > > > > - Jojo > > > > 在 2013年7月16日星期二,下午11:32,jojo 写道: > > > > > Hi, > > > Ok & i will have a try, thanks for your reply :) > > > > > > Thanks, > > > > > > - Jojo > > > > > > 在 2013年7月12日星期五,下午6:45,Erik Botö 写道: > > > > > > > Hi, > > > > On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com (mailto:rjiejie@gmail.com) > > > > <mailto:rjiejie@gmail.com>> wrote: > > > > > Hi, > > > > > My yocto version/tag is dylan. > > > > > I have compiled fsl-image-gui to testing the the audio output, but i > > > > > can not find > > > > > anything about for pulseaudio server to start up daemon. > > > > > > > > > > I saw the build code in the path about for > > > > > "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/" > > > > > and it really have built all things of pulseaudio. but when i create > > > > > the fsl-image-gui to start up, i just find "libpulse*" in the > > > > > rootfs. > > > > > > > > > > I think that something wrong with pulseaudio configure so that it do > > > > > not install completely by default. > > > > > > > > > > > > > > > > > The pulseaudio daemon is packaged as pulseaudio-server, maybe the > > > > image doesn't install that package by default? > > > > Cheers, > > > > Erik Botö > > > > > > > > > > > > > > someone know about that how to install pulseaudio completely ? > > > > > > > > > > Thanks, > > > > > > > > > > - Jojo > > > > > > > > > > > > > > > _______________________________________________ > > > > > meta-freescale mailing list > > > > > meta-freescale@yoctoproject.org <mailto:meta-freescale@yoctoproject.org> > > > > > https://lists.yoctoproject.org/listinfo/meta-freescale > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > meta-freescale mailing list > > meta-freescale@yoctoproject.org (mailto:meta-freescale@yoctoproject.org) > > https://lists.yoctoproject.org/listinfo/meta-freescale > > > > > > -- > Daiane > > [-- Attachment #2: Type: text/html, Size: 9271 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: 回复: [meta-freescale] 回复: how to install pulseaudio completely 2013-09-16 8:02 ` 回复: " jojo @ 2013-09-16 11:28 ` Daiane Angolini -1 siblings, 0 replies; 14+ messages in thread From: Daiane Angolini @ 2013-09-16 11:28 UTC (permalink / raw) To: jojo; +Cc: meta-freescale, yocto On 09/16/2013 05:02 AM, jojo wrote: > Hi, > I need to install the "pulseaudio-server" really & start up pulseaudio > in daemon mode, Sorry, I have never used pulseaudio before, and i have anything else I could say to help you. But, your DISTRO_FEATURES does have pulseaudio, so the very first step to have it on your machine is OK. Do you know the command list you need? > > hdmi output is ok :) > > bitbake -e | grep ^DISTRO_FEATURES > DISTRO_FEATURES="alsa argp bluetooth ext2 irda largefile pcmcia > usbgadget usbhost wifi xattr nfs zeroconf pci 3g nfc x11 ipv4 ipv6 > libc-backtrace libc-big-macros libc-bsd libc-cxx-tests libc-catgets > libc-charsets libc-crypt > libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt libc-fmtmsg > libc-fstab libc-ftraverse libc-getlogin libc-idn libc-inet-anl > libc-libm libc-libm-big libc-locales libc-locale-code > libc-memusage libc-nis libc-nsswitch libc-rcmd > libc-rtld-debug libc-spawn libc-streams libc-sunrpc > libc-utmp libc-utmpx libc-wordexp > libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc > libc-posix-wchar-io pulseaudio sysvinit > largefile opengl multiarch wayland" > DISTRO_FEATURES_LIBC_class-nativesdk="ipv4 ipv6 libc-backtrace > libc-big-macros libc-bsd libc-cxx-tests libc-catgets libc-charsets > libc-crypt libc-crypt-ufc > libc-db-aliases libc-envz libc-fcvt libc-fmtmsg libc-fstab > libc-ftraverse libc-getlogin libc-idn > libc-inet-anl libc-libm libc-libm-big libc-locales libc-locale-code > libc-memusage libc-nis > libc-nsswitch libc-rcmd libc-rtld-debug libc-spawn libc-streams > libc-sunrpc libc-utmp libc-utmpx libc-wordexp > libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc > libc-posix-wchar-io" > DISTRO_FEATURES_BACKFILL="pulseaudio sysvinit" > DISTRO_FEATURES_LIBC="ipv4 ipv6 libc-backtrace libc-big-macros libc-bsd > libc-cxx-tests libc-catgets libc-charsets libc-crypt > libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt > libc-fmtmsg libc-fstab libc-ftraverse > libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big > libc-locales libc-locale-code > libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug > libc-spawn libc-streams libc-sunrpc libc-utmp > libc-utmpx libc-wordexp libc-posix-clang-wchar libc-posix-regexp > libc-posix-regexp-glibc > libc-posix-wchar-io" > DISTRO_FEATURES_LIBC_DEFAULT="ipv4 ipv6 libc-backtrace libc-big-macros > libc-bsd libc-cxx-tests libc-catgets libc-charsets libc-crypt > libc-crypt-ufc libc-db-aliases libc-envz > libc-fcvt libc-fmtmsg libc-fstab libc-ftraverse > libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big > libc-locales libc-locale-code > libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug > libc-spawn libc-streams libc-sunrpc libc-utmp libc-utmpx > libc-wordexp libc-posix-clang-wchar libc-posix-regexp > libc-posix-regexp-glibc > libc-posix-wchar-io" > > Thanks, > > - Jojo > > 在 2013年9月12日星期四,下午7:29,Daiane Angolini 写道: > >> On 09/12/2013 07:07 AM, jojo wrote: >>> Hi, >> >> Hi Jojo, >> >>> I installed pulse audio server in IMX6QSD of FSL, but there is no output >>> of audio with HDMI :( >> >> Please, double check if pulseaudio is in your DISTRO_FEATURES (i think >> it's default, but I cannot remember exactly) >> >> bitbake -e | grep ^DISTRO_FEATURES >> >> How are you configuring HDMI audio? I know there is a doc in >> imx-community with the audio configuration if you want to change it from >> default to HDMI. >> >> >>> >>> how to track the log of the pulse audio ? >>> >>> Thanks, >>> >>> - Jojo >>> >>> 在 2013年7月16日星期二,下午11:32,jojo 写道: >>> >>>> Hi, >>>> Ok & i will have a try, thanks for your reply :) >>>> >>>> Thanks, >>>> >>>> - Jojo >>>> >>>> 在 2013年7月12日星期五,下午6:45,Erik Botö 写道: >>>> >>>>> Hi, >>>>> On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com >>>>> <mailto:rjiejie@gmail.com> >>>>> <mailto:rjiejie@gmail.com>> wrote: >>>>>> Hi, >>>>>> My yocto version/tag is dylan. >>>>>> I have compiled fsl-image-gui to testing the the audio output, but i >>>>>> can not find >>>>>> anything about for pulseaudio server to start up daemon. >>>>>> >>>>>> I saw the build code in the path about for >>>>>> "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/" >>>>>> and it really have built all things of pulseaudio. but when i create >>>>>> the fsl-image-gui to start up, i just find "libpulse*" in the >>>>>> rootfs. >>>>>> >>>>>> I think that something wrong with pulseaudio configure so that it do >>>>>> not install completely by default. >>>>> >>>>> The pulseaudio daemon is packaged as pulseaudio-server, maybe the >>>>> image doesn't install that package by default? >>>>> Cheers, >>>>> Erik Botö >>>>> >>>>>> >>>>>> someone know about that how to install pulseaudio completely ? >>>>>> >>>>>> Thanks, >>>>>> >>>>>> - Jojo >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> meta-freescale mailing list >>>>>> meta-freescale@yoctoproject.org >>>>>> <mailto:meta-freescale@yoctoproject.org> >>>>>> https://lists.yoctoproject.org/listinfo/meta-freescale >>> >>> >>> >>> _______________________________________________ >>> meta-freescale mailing list >>> meta-freescale@yoctoproject.org <mailto:meta-freescale@yoctoproject.org> >>> https://lists.yoctoproject.org/listinfo/meta-freescale >> >> >> -- >> Daiane > -- Daiane ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: 回复: 回复: how to install pulseaudio completely @ 2013-09-16 11:28 ` Daiane Angolini 0 siblings, 0 replies; 14+ messages in thread From: Daiane Angolini @ 2013-09-16 11:28 UTC (permalink / raw) To: jojo; +Cc: meta-freescale, yocto On 09/16/2013 05:02 AM, jojo wrote: > Hi, > I need to install the "pulseaudio-server" really & start up pulseaudio > in daemon mode, Sorry, I have never used pulseaudio before, and i have anything else I could say to help you. But, your DISTRO_FEATURES does have pulseaudio, so the very first step to have it on your machine is OK. Do you know the command list you need? > > hdmi output is ok :) > > bitbake -e | grep ^DISTRO_FEATURES > DISTRO_FEATURES="alsa argp bluetooth ext2 irda largefile pcmcia > usbgadget usbhost wifi xattr nfs zeroconf pci 3g nfc x11 ipv4 ipv6 > libc-backtrace libc-big-macros libc-bsd libc-cxx-tests libc-catgets > libc-charsets libc-crypt > libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt libc-fmtmsg > libc-fstab libc-ftraverse libc-getlogin libc-idn libc-inet-anl > libc-libm libc-libm-big libc-locales libc-locale-code > libc-memusage libc-nis libc-nsswitch libc-rcmd > libc-rtld-debug libc-spawn libc-streams libc-sunrpc > libc-utmp libc-utmpx libc-wordexp > libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc > libc-posix-wchar-io pulseaudio sysvinit > largefile opengl multiarch wayland" > DISTRO_FEATURES_LIBC_class-nativesdk="ipv4 ipv6 libc-backtrace > libc-big-macros libc-bsd libc-cxx-tests libc-catgets libc-charsets > libc-crypt libc-crypt-ufc > libc-db-aliases libc-envz libc-fcvt libc-fmtmsg libc-fstab > libc-ftraverse libc-getlogin libc-idn > libc-inet-anl libc-libm libc-libm-big libc-locales libc-locale-code > libc-memusage libc-nis > libc-nsswitch libc-rcmd libc-rtld-debug libc-spawn libc-streams > libc-sunrpc libc-utmp libc-utmpx libc-wordexp > libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc > libc-posix-wchar-io" > DISTRO_FEATURES_BACKFILL="pulseaudio sysvinit" > DISTRO_FEATURES_LIBC="ipv4 ipv6 libc-backtrace libc-big-macros libc-bsd > libc-cxx-tests libc-catgets libc-charsets libc-crypt > libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt > libc-fmtmsg libc-fstab libc-ftraverse > libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big > libc-locales libc-locale-code > libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug > libc-spawn libc-streams libc-sunrpc libc-utmp > libc-utmpx libc-wordexp libc-posix-clang-wchar libc-posix-regexp > libc-posix-regexp-glibc > libc-posix-wchar-io" > DISTRO_FEATURES_LIBC_DEFAULT="ipv4 ipv6 libc-backtrace libc-big-macros > libc-bsd libc-cxx-tests libc-catgets libc-charsets libc-crypt > libc-crypt-ufc libc-db-aliases libc-envz > libc-fcvt libc-fmtmsg libc-fstab libc-ftraverse > libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big > libc-locales libc-locale-code > libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug > libc-spawn libc-streams libc-sunrpc libc-utmp libc-utmpx > libc-wordexp libc-posix-clang-wchar libc-posix-regexp > libc-posix-regexp-glibc > libc-posix-wchar-io" > > Thanks, > > - Jojo > > 在 2013年9月12日星期四,下午7:29,Daiane Angolini 写道: > >> On 09/12/2013 07:07 AM, jojo wrote: >>> Hi, >> >> Hi Jojo, >> >>> I installed pulse audio server in IMX6QSD of FSL, but there is no output >>> of audio with HDMI :( >> >> Please, double check if pulseaudio is in your DISTRO_FEATURES (i think >> it's default, but I cannot remember exactly) >> >> bitbake -e | grep ^DISTRO_FEATURES >> >> How are you configuring HDMI audio? I know there is a doc in >> imx-community with the audio configuration if you want to change it from >> default to HDMI. >> >> >>> >>> how to track the log of the pulse audio ? >>> >>> Thanks, >>> >>> - Jojo >>> >>> 在 2013年7月16日星期二,下午11:32,jojo 写道: >>> >>>> Hi, >>>> Ok & i will have a try, thanks for your reply :) >>>> >>>> Thanks, >>>> >>>> - Jojo >>>> >>>> 在 2013年7月12日星期五,下午6:45,Erik Botö 写道: >>>> >>>>> Hi, >>>>> On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com >>>>> <mailto:rjiejie@gmail.com> >>>>> <mailto:rjiejie@gmail.com>> wrote: >>>>>> Hi, >>>>>> My yocto version/tag is dylan. >>>>>> I have compiled fsl-image-gui to testing the the audio output, but i >>>>>> can not find >>>>>> anything about for pulseaudio server to start up daemon. >>>>>> >>>>>> I saw the build code in the path about for >>>>>> "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/" >>>>>> and it really have built all things of pulseaudio. but when i create >>>>>> the fsl-image-gui to start up, i just find "libpulse*" in the >>>>>> rootfs. >>>>>> >>>>>> I think that something wrong with pulseaudio configure so that it do >>>>>> not install completely by default. >>>>> >>>>> The pulseaudio daemon is packaged as pulseaudio-server, maybe the >>>>> image doesn't install that package by default? >>>>> Cheers, >>>>> Erik Botö >>>>> >>>>>> >>>>>> someone know about that how to install pulseaudio completely ? >>>>>> >>>>>> Thanks, >>>>>> >>>>>> - Jojo >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> meta-freescale mailing list >>>>>> meta-freescale@yoctoproject.org >>>>>> <mailto:meta-freescale@yoctoproject.org> >>>>>> https://lists.yoctoproject.org/listinfo/meta-freescale >>> >>> >>> >>> _______________________________________________ >>> meta-freescale mailing list >>> meta-freescale@yoctoproject.org <mailto:meta-freescale@yoctoproject.org> >>> https://lists.yoctoproject.org/listinfo/meta-freescale >> >> >> -- >> Daiane > -- Daiane ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2013-09-16 11:33 UTC | newest] Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2013-07-12 10:35 [meta-freescale] how to install pulseaudio completely jojo 2013-07-12 10:35 ` jojo 2013-07-12 10:45 ` [meta-freescale] " Erik Botö 2013-07-12 10:45 ` Erik Botö 2013-07-16 15:32 ` 回复: meta-freescale] " jojo 2013-07-16 15:32 ` 回复: " jojo 2013-09-12 10:07 ` 回复: meta-freescale] " jojo 2013-09-12 10:07 ` 回复: " jojo 2013-09-12 11:29 ` [meta-freescale] " Daiane Angolini 2013-09-12 11:29 ` Daiane Angolini 2013-09-16 8:02 ` 回复: meta-freescale] 回复: ow " jojo 2013-09-16 8:02 ` 回复: " jojo 2013-09-16 11:28 ` 回复: [meta-freescale] 回复: how " Daiane Angolini 2013-09-16 11:28 ` 回复: " Daiane Angolini
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.