* [meta-freescale] how to install pulseaudio completely
@ 2013-07-12 10:35 ` jojo
0 siblings, 0 replies; 14+ messages in thread
From: jojo @ 2013-07-12 10:35 UTC (permalink / raw)
To: meta-freescale; +Cc: yocto
[-- Attachment #1: Type: text/plain, Size: 642 bytes --]
Hi,
My yocto version/tag is dylan.
I have compiled fsl-image-gui to testing the the audio output, but i can not find
anything about for pulseaudio server to start up daemon.
I saw the build code in the path about for "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/"
and it really have built all things of pulseaudio. but when i create the fsl-image-gui to start up, i just find "libpulse*" in the
rootfs.
I think that something wrong with pulseaudio configure so that it do not install completely by default.
someone know about that how to install pulseaudio completely ?
Thanks,
- Jojo
[-- Attachment #2: Type: text/html, Size: 1444 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* how to install pulseaudio completely
@ 2013-07-12 10:35 ` jojo
0 siblings, 0 replies; 14+ messages in thread
From: jojo @ 2013-07-12 10:35 UTC (permalink / raw)
To: meta-freescale; +Cc: yocto
[-- Attachment #1: Type: text/plain, Size: 642 bytes --]
Hi,
My yocto version/tag is dylan.
I have compiled fsl-image-gui to testing the the audio output, but i can not find
anything about for pulseaudio server to start up daemon.
I saw the build code in the path about for "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/"
and it really have built all things of pulseaudio. but when i create the fsl-image-gui to start up, i just find "libpulse*" in the
rootfs.
I think that something wrong with pulseaudio configure so that it do not install completely by default.
someone know about that how to install pulseaudio completely ?
Thanks,
- Jojo
[-- Attachment #2: Type: text/html, Size: 1444 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [meta-freescale] how to install pulseaudio completely
2013-07-12 10:35 ` jojo
@ 2013-07-12 10:45 ` Erik Botö
-1 siblings, 0 replies; 14+ messages in thread
From: Erik Botö @ 2013-07-12 10:45 UTC (permalink / raw)
To: jojo; +Cc: meta-freescale, yocto
[-- Attachment #1: Type: text/plain, Size: 1080 bytes --]
Hi,
On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com> wrote:
> Hi,
> My yocto version/tag is dylan.
> I have compiled fsl-image-gui to testing the the audio output, but i can
> not find
> anything about for pulseaudio server to start up daemon.
>
> I saw the build code in the path about for
> "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/"
> and it really have built all things of pulseaudio. but when i create the
> fsl-image-gui to start up, i just find "libpulse*" in the
> rootfs.
>
> I think that something wrong with pulseaudio configure so that it do not
> install completely by default.
>
The pulseaudio daemon is packaged as pulseaudio-server, maybe the image
doesn't install that package by default?
Cheers,
Erik Botö
> someone know about that how to install pulseaudio completely ?
>
> Thanks,
>
> - Jojo
>
>
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
>
>
[-- Attachment #2: Type: text/html, Size: 2341 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: how to install pulseaudio completely
@ 2013-07-12 10:45 ` Erik Botö
0 siblings, 0 replies; 14+ messages in thread
From: Erik Botö @ 2013-07-12 10:45 UTC (permalink / raw)
To: jojo; +Cc: meta-freescale, yocto
[-- Attachment #1: Type: text/plain, Size: 1080 bytes --]
Hi,
On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com> wrote:
> Hi,
> My yocto version/tag is dylan.
> I have compiled fsl-image-gui to testing the the audio output, but i can
> not find
> anything about for pulseaudio server to start up daemon.
>
> I saw the build code in the path about for
> "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/"
> and it really have built all things of pulseaudio. but when i create the
> fsl-image-gui to start up, i just find "libpulse*" in the
> rootfs.
>
> I think that something wrong with pulseaudio configure so that it do not
> install completely by default.
>
The pulseaudio daemon is packaged as pulseaudio-server, maybe the image
doesn't install that package by default?
Cheers,
Erik Botö
> someone know about that how to install pulseaudio completely ?
>
> Thanks,
>
> - Jojo
>
>
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
>
>
[-- Attachment #2: Type: text/html, Size: 2341 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* 回复: meta-freescale] how to install pulseaudio completely
2013-07-12 10:45 ` Erik Botö
@ 2013-07-16 15:32 ` jojo
-1 siblings, 0 replies; 14+ messages in thread
From: jojo @ 2013-07-16 15:32 UTC (permalink / raw)
To: Erik Botö; +Cc: meta-freescale, yocto
[-- Attachment #1: Type: text/plain, Size: 1387 bytes --]
Hi,
Ok & i will have a try, thanks for your reply :)
Thanks,
- Jojo
在 2013年7月12日星期五,下午6:45,Erik Botö 写道:
> Hi,
> On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com (mailto:rjiejie@gmail.com)> wrote:
> > Hi,
> > My yocto version/tag is dylan.
> >
> > I have compiled fsl-image-gui to testing the the audio output, but i can not find
> > anything about for pulseaudio server to start up daemon.
> >
> > I saw the build code in the path about for "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/"
> > and it really have built all things of pulseaudio. but when i create the fsl-image-gui to start up, i just find "libpulse*" in the
> > rootfs.
> >
> > I think that something wrong with pulseaudio configure so that it do not install completely by default.
>
> The pulseaudio daemon is packaged as pulseaudio-server, maybe the image doesn't install that package by default?
>
> Cheers,
> Erik Botö
>
> >
> > someone know about that how to install pulseaudio completely ?
> >
> > Thanks,
> >
> > - Jojo
> >
> >
> > _______________________________________________
> > meta-freescale mailing list
> > meta-freescale@yoctoproject.org (mailto:meta-freescale@yoctoproject.org)
> > https://lists.yoctoproject.org/listinfo/meta-freescale
> >
>
[-- Attachment #2: Type: text/html, Size: 2959 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* 回复: how to install pulseaudio completely
@ 2013-07-16 15:32 ` jojo
0 siblings, 0 replies; 14+ messages in thread
From: jojo @ 2013-07-16 15:32 UTC (permalink / raw)
To: Erik Botö; +Cc: meta-freescale, yocto
[-- Attachment #1: Type: text/plain, Size: 1387 bytes --]
Hi,
Ok & i will have a try, thanks for your reply :)
Thanks,
- Jojo
在 2013年7月12日星期五,下午6:45,Erik Botö 写道:
> Hi,
> On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com (mailto:rjiejie@gmail.com)> wrote:
> > Hi,
> > My yocto version/tag is dylan.
> >
> > I have compiled fsl-image-gui to testing the the audio output, but i can not find
> > anything about for pulseaudio server to start up daemon.
> >
> > I saw the build code in the path about for "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/"
> > and it really have built all things of pulseaudio. but when i create the fsl-image-gui to start up, i just find "libpulse*" in the
> > rootfs.
> >
> > I think that something wrong with pulseaudio configure so that it do not install completely by default.
>
> The pulseaudio daemon is packaged as pulseaudio-server, maybe the image doesn't install that package by default?
>
> Cheers,
> Erik Botö
>
> >
> > someone know about that how to install pulseaudio completely ?
> >
> > Thanks,
> >
> > - Jojo
> >
> >
> > _______________________________________________
> > meta-freescale mailing list
> > meta-freescale@yoctoproject.org (mailto:meta-freescale@yoctoproject.org)
> > https://lists.yoctoproject.org/listinfo/meta-freescale
> >
>
[-- Attachment #2: Type: text/html, Size: 2959 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* 回复: meta-freescale] how to install pulseaudio completely
2013-07-16 15:32 ` 回复: " jojo
@ 2013-09-12 10:07 ` jojo
-1 siblings, 0 replies; 14+ messages in thread
From: jojo @ 2013-09-12 10:07 UTC (permalink / raw)
To: Erik Botö; +Cc: meta-freescale, yocto
[-- Attachment #1: Type: text/plain, Size: 1720 bytes --]
Hi,
I installed pulse audio server in IMX6QSD of FSL, but there is no output of audio with HDMI :(
how to track the log of the pulse audio ?
Thanks,
- Jojo
在 2013年7月16日星期二,下午11:32,jojo 写道:
> Hi,
> Ok & i will have a try, thanks for your reply :)
>
> Thanks,
>
> - Jojo
>
>
> 在 2013年7月12日星期五,下午6:45,Erik Botö 写道:
>
> > Hi,
> > On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com (mailto:rjiejie@gmail.com)> wrote:
> > > Hi,
> > > My yocto version/tag is dylan.
> > >
> > > I have compiled fsl-image-gui to testing the the audio output, but i can not find
> > > anything about for pulseaudio server to start up daemon.
> > >
> > > I saw the build code in the path about for "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/"
> > > and it really have built all things of pulseaudio. but when i create the fsl-image-gui to start up, i just find "libpulse*" in the
> > > rootfs.
> > >
> > > I think that something wrong with pulseaudio configure so that it do not install completely by default.
> >
> > The pulseaudio daemon is packaged as pulseaudio-server, maybe the image doesn't install that package by default?
> >
> > Cheers,
> > Erik Botö
> >
> > >
> > > someone know about that how to install pulseaudio completely ?
> > >
> > > Thanks,
> > >
> > > - Jojo
> > >
> > >
> > > _______________________________________________
> > > meta-freescale mailing list
> > > meta-freescale@yoctoproject.org (mailto:meta-freescale@yoctoproject.org)
> > > https://lists.yoctoproject.org/listinfo/meta-freescale
> > >
> >
>
[-- Attachment #2: Type: text/html, Size: 3794 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* 回复: how to install pulseaudio completely
@ 2013-09-12 10:07 ` jojo
0 siblings, 0 replies; 14+ messages in thread
From: jojo @ 2013-09-12 10:07 UTC (permalink / raw)
To: Erik Botö; +Cc: meta-freescale, yocto
[-- Attachment #1: Type: text/plain, Size: 1720 bytes --]
Hi,
I installed pulse audio server in IMX6QSD of FSL, but there is no output of audio with HDMI :(
how to track the log of the pulse audio ?
Thanks,
- Jojo
在 2013年7月16日星期二,下午11:32,jojo 写道:
> Hi,
> Ok & i will have a try, thanks for your reply :)
>
> Thanks,
>
> - Jojo
>
>
> 在 2013年7月12日星期五,下午6:45,Erik Botö 写道:
>
> > Hi,
> > On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com (mailto:rjiejie@gmail.com)> wrote:
> > > Hi,
> > > My yocto version/tag is dylan.
> > >
> > > I have compiled fsl-image-gui to testing the the audio output, but i can not find
> > > anything about for pulseaudio server to start up daemon.
> > >
> > > I saw the build code in the path about for "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/"
> > > and it really have built all things of pulseaudio. but when i create the fsl-image-gui to start up, i just find "libpulse*" in the
> > > rootfs.
> > >
> > > I think that something wrong with pulseaudio configure so that it do not install completely by default.
> >
> > The pulseaudio daemon is packaged as pulseaudio-server, maybe the image doesn't install that package by default?
> >
> > Cheers,
> > Erik Botö
> >
> > >
> > > someone know about that how to install pulseaudio completely ?
> > >
> > > Thanks,
> > >
> > > - Jojo
> > >
> > >
> > > _______________________________________________
> > > meta-freescale mailing list
> > > meta-freescale@yoctoproject.org (mailto:meta-freescale@yoctoproject.org)
> > > https://lists.yoctoproject.org/listinfo/meta-freescale
> > >
> >
>
[-- Attachment #2: Type: text/html, Size: 3794 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [meta-freescale] 回复: how to install pulseaudio completely
2013-09-12 10:07 ` 回复: " jojo
@ 2013-09-12 11:29 ` Daiane Angolini
-1 siblings, 0 replies; 14+ messages in thread
From: Daiane Angolini @ 2013-09-12 11:29 UTC (permalink / raw)
To: jojo; +Cc: meta-freescale, yocto
On 09/12/2013 07:07 AM, jojo wrote:
> Hi,
Hi Jojo,
> I installed pulse audio server in IMX6QSD of FSL, but there is no output
> of audio with HDMI :(
Please, double check if pulseaudio is in your DISTRO_FEATURES (i think
it's default, but I cannot remember exactly)
bitbake -e | grep ^DISTRO_FEATURES
How are you configuring HDMI audio? I know there is a doc in
imx-community with the audio configuration if you want to change it from
default to HDMI.
>
> how to track the log of the pulse audio ?
>
> Thanks,
>
> - Jojo
>
> 在 2013年7月16日星期二,下午11:32,jojo 写道:
>
>> Hi,
>> Ok & i will have a try, thanks for your reply :)
>>
>> Thanks,
>>
>> - Jojo
>>
>> 在 2013年7月12日星期五,下午6:45,Erik Botö 写道:
>>
>>> Hi,
>>> On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com
>>> <mailto:rjiejie@gmail.com>> wrote:
>>>> Hi,
>>>> My yocto version/tag is dylan.
>>>> I have compiled fsl-image-gui to testing the the audio output, but i
>>>> can not find
>>>> anything about for pulseaudio server to start up daemon.
>>>>
>>>> I saw the build code in the path about for
>>>> "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/"
>>>> and it really have built all things of pulseaudio. but when i create
>>>> the fsl-image-gui to start up, i just find "libpulse*" in the
>>>> rootfs.
>>>>
>>>> I think that something wrong with pulseaudio configure so that it do
>>>> not install completely by default.
>>>
>>> The pulseaudio daemon is packaged as pulseaudio-server, maybe the
>>> image doesn't install that package by default?
>>> Cheers,
>>> Erik Botö
>>>
>>>>
>>>> someone know about that how to install pulseaudio completely ?
>>>>
>>>> Thanks,
>>>>
>>>> - Jojo
>>>>
>>>>
>>>> _______________________________________________
>>>> meta-freescale mailing list
>>>> meta-freescale@yoctoproject.org <mailto:meta-freescale@yoctoproject.org>
>>>> https://lists.yoctoproject.org/listinfo/meta-freescale
>>>>
>>>
>>
>
>
>
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
>
--
Daiane
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: 回复: how to install pulseaudio completely
@ 2013-09-12 11:29 ` Daiane Angolini
0 siblings, 0 replies; 14+ messages in thread
From: Daiane Angolini @ 2013-09-12 11:29 UTC (permalink / raw)
To: jojo; +Cc: meta-freescale, yocto
On 09/12/2013 07:07 AM, jojo wrote:
> Hi,
Hi Jojo,
> I installed pulse audio server in IMX6QSD of FSL, but there is no output
> of audio with HDMI :(
Please, double check if pulseaudio is in your DISTRO_FEATURES (i think
it's default, but I cannot remember exactly)
bitbake -e | grep ^DISTRO_FEATURES
How are you configuring HDMI audio? I know there is a doc in
imx-community with the audio configuration if you want to change it from
default to HDMI.
>
> how to track the log of the pulse audio ?
>
> Thanks,
>
> - Jojo
>
> 在 2013年7月16日星期二,下午11:32,jojo 写道:
>
>> Hi,
>> Ok & i will have a try, thanks for your reply :)
>>
>> Thanks,
>>
>> - Jojo
>>
>> 在 2013年7月12日星期五,下午6:45,Erik Botö 写道:
>>
>>> Hi,
>>> On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com
>>> <mailto:rjiejie@gmail.com>> wrote:
>>>> Hi,
>>>> My yocto version/tag is dylan.
>>>> I have compiled fsl-image-gui to testing the the audio output, but i
>>>> can not find
>>>> anything about for pulseaudio server to start up daemon.
>>>>
>>>> I saw the build code in the path about for
>>>> "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/"
>>>> and it really have built all things of pulseaudio. but when i create
>>>> the fsl-image-gui to start up, i just find "libpulse*" in the
>>>> rootfs.
>>>>
>>>> I think that something wrong with pulseaudio configure so that it do
>>>> not install completely by default.
>>>
>>> The pulseaudio daemon is packaged as pulseaudio-server, maybe the
>>> image doesn't install that package by default?
>>> Cheers,
>>> Erik Botö
>>>
>>>>
>>>> someone know about that how to install pulseaudio completely ?
>>>>
>>>> Thanks,
>>>>
>>>> - Jojo
>>>>
>>>>
>>>> _______________________________________________
>>>> meta-freescale mailing list
>>>> meta-freescale@yoctoproject.org <mailto:meta-freescale@yoctoproject.org>
>>>> https://lists.yoctoproject.org/listinfo/meta-freescale
>>>>
>>>
>>
>
>
>
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
>
--
Daiane
^ permalink raw reply [flat|nested] 14+ messages in thread
* 回复: meta-freescale] 回复: ow to install pulseaudio completely
2013-09-12 11:29 ` Daiane Angolini
@ 2013-09-16 8:02 ` jojo
-1 siblings, 0 replies; 14+ messages in thread
From: jojo @ 2013-09-16 8:02 UTC (permalink / raw)
To: Daiane Angolini; +Cc: meta-freescale, yocto
[-- Attachment #1: Type: text/plain, Size: 5996 bytes --]
Hi,
I need to install the "pulseaudio-server" really & start up pulseaudio in daemon mode,
hdmi output is ok :)
bitbake -e | grep ^DISTRO_FEATURES
DISTRO_FEATURES="alsa argp bluetooth ext2 irda largefile pcmcia usbgadget usbhost wifi xattr nfs zeroconf pci 3g nfc x11 ipv4 ipv6 libc-backtrace libc-big-macros libc-bsd libc-cxx-tests libc-catgets libc-charsets libc-crypt libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt libc-fmtmsg libc-fstab libc-ftraverse libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big libc-locales libc-locale-code libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug libc-spawn libc-streams libc-sunrpc libc-utmp libc-utmpx libc-wordexp libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc libc-posix-wchar-io pulseaudio sysvinit largefile opengl multiarch wayland"
DISTRO_FEATURES_LIBC_class-nativesdk="ipv4 ipv6 libc-backtrace libc-big-macros libc-bsd libc-cxx-tests libc-catgets libc-charsets libc-crypt libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt libc-fmtmsg libc-fstab libc-ftraverse libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big libc-locales libc-locale-code libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug libc-spawn libc-streams libc-sunrpc libc-utmp libc-utmpx libc-wordexp libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc libc-posix-wchar-io"
DISTRO_FEATURES_BACKFILL="pulseaudio sysvinit"
DISTRO_FEATURES_LIBC="ipv4 ipv6 libc-backtrace libc-big-macros libc-bsd libc-cxx-tests libc-catgets libc-charsets libc-crypt libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt libc-fmtmsg libc-fstab libc-ftraverse libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big libc-locales libc-locale-code libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug libc-spawn libc-streams libc-sunrpc libc-utmp libc-utmpx libc-wordexp libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc libc-posix-wchar-io"
DISTRO_FEATURES_LIBC_DEFAULT="ipv4 ipv6 libc-backtrace libc-big-macros libc-bsd libc-cxx-tests libc-catgets libc-charsets libc-crypt libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt libc-fmtmsg libc-fstab libc-ftraverse libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big libc-locales libc-locale-code libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug libc-spawn libc-streams libc-sunrpc libc-utmp libc-utmpx libc-wordexp libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc libc-posix-wchar-io"
Thanks,
- Jojo
在 2013年9月12日星期四,下午7:29,Daiane Angolini 写道:
> On 09/12/2013 07:07 AM, jojo wrote:
> > Hi,
>
>
> Hi Jojo,
>
> > I installed pulse audio server in IMX6QSD of FSL, but there is no output
> > of audio with HDMI :(
> >
>
>
> Please, double check if pulseaudio is in your DISTRO_FEATURES (i think
> it's default, but I cannot remember exactly)
>
> bitbake -e | grep ^DISTRO_FEATURES
>
> How are you configuring HDMI audio? I know there is a doc in
> imx-community with the audio configuration if you want to change it from
> default to HDMI.
>
>
> >
> > how to track the log of the pulse audio ?
> >
> > Thanks,
> >
> > - Jojo
> >
> > 在 2013年7月16日星期二,下午11:32,jojo 写道:
> >
> > > Hi,
> > > Ok & i will have a try, thanks for your reply :)
> > >
> > > Thanks,
> > >
> > > - Jojo
> > >
> > > 在 2013年7月12日星期五,下午6:45,Erik Botö 写道:
> > >
> > > > Hi,
> > > > On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com (mailto:rjiejie@gmail.com)
> > > > <mailto:rjiejie@gmail.com>> wrote:
> > > > > Hi,
> > > > > My yocto version/tag is dylan.
> > > > > I have compiled fsl-image-gui to testing the the audio output, but i
> > > > > can not find
> > > > > anything about for pulseaudio server to start up daemon.
> > > > >
> > > > > I saw the build code in the path about for
> > > > > "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/"
> > > > > and it really have built all things of pulseaudio. but when i create
> > > > > the fsl-image-gui to start up, i just find "libpulse*" in the
> > > > > rootfs.
> > > > >
> > > > > I think that something wrong with pulseaudio configure so that it do
> > > > > not install completely by default.
> > > > >
> > > >
> > > >
> > > > The pulseaudio daemon is packaged as pulseaudio-server, maybe the
> > > > image doesn't install that package by default?
> > > > Cheers,
> > > > Erik Botö
> > > >
> > > > >
> > > > > someone know about that how to install pulseaudio completely ?
> > > > >
> > > > > Thanks,
> > > > >
> > > > > - Jojo
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > meta-freescale mailing list
> > > > > meta-freescale@yoctoproject.org <mailto:meta-freescale@yoctoproject.org>
> > > > > https://lists.yoctoproject.org/listinfo/meta-freescale
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
> >
> >
> > _______________________________________________
> > meta-freescale mailing list
> > meta-freescale@yoctoproject.org (mailto:meta-freescale@yoctoproject.org)
> > https://lists.yoctoproject.org/listinfo/meta-freescale
> >
>
>
>
> --
> Daiane
>
>
[-- Attachment #2: Type: text/html, Size: 9271 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* 回复: 回复: ow to install pulseaudio completely
@ 2013-09-16 8:02 ` jojo
0 siblings, 0 replies; 14+ messages in thread
From: jojo @ 2013-09-16 8:02 UTC (permalink / raw)
To: Daiane Angolini; +Cc: meta-freescale, yocto
[-- Attachment #1: Type: text/plain, Size: 5996 bytes --]
Hi,
I need to install the "pulseaudio-server" really & start up pulseaudio in daemon mode,
hdmi output is ok :)
bitbake -e | grep ^DISTRO_FEATURES
DISTRO_FEATURES="alsa argp bluetooth ext2 irda largefile pcmcia usbgadget usbhost wifi xattr nfs zeroconf pci 3g nfc x11 ipv4 ipv6 libc-backtrace libc-big-macros libc-bsd libc-cxx-tests libc-catgets libc-charsets libc-crypt libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt libc-fmtmsg libc-fstab libc-ftraverse libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big libc-locales libc-locale-code libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug libc-spawn libc-streams libc-sunrpc libc-utmp libc-utmpx libc-wordexp libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc libc-posix-wchar-io pulseaudio sysvinit largefile opengl multiarch wayland"
DISTRO_FEATURES_LIBC_class-nativesdk="ipv4 ipv6 libc-backtrace libc-big-macros libc-bsd libc-cxx-tests libc-catgets libc-charsets libc-crypt libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt libc-fmtmsg libc-fstab libc-ftraverse libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big libc-locales libc-locale-code libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug libc-spawn libc-streams libc-sunrpc libc-utmp libc-utmpx libc-wordexp libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc libc-posix-wchar-io"
DISTRO_FEATURES_BACKFILL="pulseaudio sysvinit"
DISTRO_FEATURES_LIBC="ipv4 ipv6 libc-backtrace libc-big-macros libc-bsd libc-cxx-tests libc-catgets libc-charsets libc-crypt libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt libc-fmtmsg libc-fstab libc-ftraverse libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big libc-locales libc-locale-code libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug libc-spawn libc-streams libc-sunrpc libc-utmp libc-utmpx libc-wordexp libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc libc-posix-wchar-io"
DISTRO_FEATURES_LIBC_DEFAULT="ipv4 ipv6 libc-backtrace libc-big-macros libc-bsd libc-cxx-tests libc-catgets libc-charsets libc-crypt libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt libc-fmtmsg libc-fstab libc-ftraverse libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big libc-locales libc-locale-code libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug libc-spawn libc-streams libc-sunrpc libc-utmp libc-utmpx libc-wordexp libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc libc-posix-wchar-io"
Thanks,
- Jojo
在 2013年9月12日星期四,下午7:29,Daiane Angolini 写道:
> On 09/12/2013 07:07 AM, jojo wrote:
> > Hi,
>
>
> Hi Jojo,
>
> > I installed pulse audio server in IMX6QSD of FSL, but there is no output
> > of audio with HDMI :(
> >
>
>
> Please, double check if pulseaudio is in your DISTRO_FEATURES (i think
> it's default, but I cannot remember exactly)
>
> bitbake -e | grep ^DISTRO_FEATURES
>
> How are you configuring HDMI audio? I know there is a doc in
> imx-community with the audio configuration if you want to change it from
> default to HDMI.
>
>
> >
> > how to track the log of the pulse audio ?
> >
> > Thanks,
> >
> > - Jojo
> >
> > 在 2013年7月16日星期二,下午11:32,jojo 写道:
> >
> > > Hi,
> > > Ok & i will have a try, thanks for your reply :)
> > >
> > > Thanks,
> > >
> > > - Jojo
> > >
> > > 在 2013年7月12日星期五,下午6:45,Erik Botö 写道:
> > >
> > > > Hi,
> > > > On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com (mailto:rjiejie@gmail.com)
> > > > <mailto:rjiejie@gmail.com>> wrote:
> > > > > Hi,
> > > > > My yocto version/tag is dylan.
> > > > > I have compiled fsl-image-gui to testing the the audio output, but i
> > > > > can not find
> > > > > anything about for pulseaudio server to start up daemon.
> > > > >
> > > > > I saw the build code in the path about for
> > > > > "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/"
> > > > > and it really have built all things of pulseaudio. but when i create
> > > > > the fsl-image-gui to start up, i just find "libpulse*" in the
> > > > > rootfs.
> > > > >
> > > > > I think that something wrong with pulseaudio configure so that it do
> > > > > not install completely by default.
> > > > >
> > > >
> > > >
> > > > The pulseaudio daemon is packaged as pulseaudio-server, maybe the
> > > > image doesn't install that package by default?
> > > > Cheers,
> > > > Erik Botö
> > > >
> > > > >
> > > > > someone know about that how to install pulseaudio completely ?
> > > > >
> > > > > Thanks,
> > > > >
> > > > > - Jojo
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > meta-freescale mailing list
> > > > > meta-freescale@yoctoproject.org <mailto:meta-freescale@yoctoproject.org>
> > > > > https://lists.yoctoproject.org/listinfo/meta-freescale
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
> >
> >
> > _______________________________________________
> > meta-freescale mailing list
> > meta-freescale@yoctoproject.org (mailto:meta-freescale@yoctoproject.org)
> > https://lists.yoctoproject.org/listinfo/meta-freescale
> >
>
>
>
> --
> Daiane
>
>
[-- Attachment #2: Type: text/html, Size: 9271 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: 回复: [meta-freescale] 回复: how to install pulseaudio completely
2013-09-16 8:02 ` 回复: " jojo
@ 2013-09-16 11:28 ` Daiane Angolini
-1 siblings, 0 replies; 14+ messages in thread
From: Daiane Angolini @ 2013-09-16 11:28 UTC (permalink / raw)
To: jojo; +Cc: meta-freescale, yocto
On 09/16/2013 05:02 AM, jojo wrote:
> Hi,
> I need to install the "pulseaudio-server" really & start up pulseaudio
> in daemon mode,
Sorry, I have never used pulseaudio before, and i have anything else I
could say to help you.
But, your DISTRO_FEATURES does have pulseaudio, so the very first step
to have it on your machine is OK.
Do you know the command list you need?
>
> hdmi output is ok :)
>
> bitbake -e | grep ^DISTRO_FEATURES
> DISTRO_FEATURES="alsa argp bluetooth ext2 irda largefile pcmcia
> usbgadget usbhost wifi xattr nfs zeroconf pci 3g nfc x11 ipv4 ipv6
> libc-backtrace libc-big-macros libc-bsd libc-cxx-tests libc-catgets
> libc-charsets libc-crypt
> libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt libc-fmtmsg
> libc-fstab libc-ftraverse libc-getlogin libc-idn libc-inet-anl
> libc-libm libc-libm-big libc-locales libc-locale-code
> libc-memusage libc-nis libc-nsswitch libc-rcmd
> libc-rtld-debug libc-spawn libc-streams libc-sunrpc
> libc-utmp libc-utmpx libc-wordexp
> libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc
> libc-posix-wchar-io pulseaudio sysvinit
> largefile opengl multiarch wayland"
> DISTRO_FEATURES_LIBC_class-nativesdk="ipv4 ipv6 libc-backtrace
> libc-big-macros libc-bsd libc-cxx-tests libc-catgets libc-charsets
> libc-crypt libc-crypt-ufc
> libc-db-aliases libc-envz libc-fcvt libc-fmtmsg libc-fstab
> libc-ftraverse libc-getlogin libc-idn
> libc-inet-anl libc-libm libc-libm-big libc-locales libc-locale-code
> libc-memusage libc-nis
> libc-nsswitch libc-rcmd libc-rtld-debug libc-spawn libc-streams
> libc-sunrpc libc-utmp libc-utmpx libc-wordexp
> libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc
> libc-posix-wchar-io"
> DISTRO_FEATURES_BACKFILL="pulseaudio sysvinit"
> DISTRO_FEATURES_LIBC="ipv4 ipv6 libc-backtrace libc-big-macros libc-bsd
> libc-cxx-tests libc-catgets libc-charsets libc-crypt
> libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt
> libc-fmtmsg libc-fstab libc-ftraverse
> libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big
> libc-locales libc-locale-code
> libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug
> libc-spawn libc-streams libc-sunrpc libc-utmp
> libc-utmpx libc-wordexp libc-posix-clang-wchar libc-posix-regexp
> libc-posix-regexp-glibc
> libc-posix-wchar-io"
> DISTRO_FEATURES_LIBC_DEFAULT="ipv4 ipv6 libc-backtrace libc-big-macros
> libc-bsd libc-cxx-tests libc-catgets libc-charsets libc-crypt
> libc-crypt-ufc libc-db-aliases libc-envz
> libc-fcvt libc-fmtmsg libc-fstab libc-ftraverse
> libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big
> libc-locales libc-locale-code
> libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug
> libc-spawn libc-streams libc-sunrpc libc-utmp libc-utmpx
> libc-wordexp libc-posix-clang-wchar libc-posix-regexp
> libc-posix-regexp-glibc
> libc-posix-wchar-io"
>
> Thanks,
>
> - Jojo
>
> 在 2013年9月12日星期四,下午7:29,Daiane Angolini 写道:
>
>> On 09/12/2013 07:07 AM, jojo wrote:
>>> Hi,
>>
>> Hi Jojo,
>>
>>> I installed pulse audio server in IMX6QSD of FSL, but there is no output
>>> of audio with HDMI :(
>>
>> Please, double check if pulseaudio is in your DISTRO_FEATURES (i think
>> it's default, but I cannot remember exactly)
>>
>> bitbake -e | grep ^DISTRO_FEATURES
>>
>> How are you configuring HDMI audio? I know there is a doc in
>> imx-community with the audio configuration if you want to change it from
>> default to HDMI.
>>
>>
>>>
>>> how to track the log of the pulse audio ?
>>>
>>> Thanks,
>>>
>>> - Jojo
>>>
>>> 在 2013年7月16日星期二,下午11:32,jojo 写道:
>>>
>>>> Hi,
>>>> Ok & i will have a try, thanks for your reply :)
>>>>
>>>> Thanks,
>>>>
>>>> - Jojo
>>>>
>>>> 在 2013年7月12日星期五,下午6:45,Erik Botö 写道:
>>>>
>>>>> Hi,
>>>>> On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com
>>>>> <mailto:rjiejie@gmail.com>
>>>>> <mailto:rjiejie@gmail.com>> wrote:
>>>>>> Hi,
>>>>>> My yocto version/tag is dylan.
>>>>>> I have compiled fsl-image-gui to testing the the audio output, but i
>>>>>> can not find
>>>>>> anything about for pulseaudio server to start up daemon.
>>>>>>
>>>>>> I saw the build code in the path about for
>>>>>> "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/"
>>>>>> and it really have built all things of pulseaudio. but when i create
>>>>>> the fsl-image-gui to start up, i just find "libpulse*" in the
>>>>>> rootfs.
>>>>>>
>>>>>> I think that something wrong with pulseaudio configure so that it do
>>>>>> not install completely by default.
>>>>>
>>>>> The pulseaudio daemon is packaged as pulseaudio-server, maybe the
>>>>> image doesn't install that package by default?
>>>>> Cheers,
>>>>> Erik Botö
>>>>>
>>>>>>
>>>>>> someone know about that how to install pulseaudio completely ?
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> - Jojo
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> meta-freescale mailing list
>>>>>> meta-freescale@yoctoproject.org
>>>>>> <mailto:meta-freescale@yoctoproject.org>
>>>>>> https://lists.yoctoproject.org/listinfo/meta-freescale
>>>
>>>
>>>
>>> _______________________________________________
>>> meta-freescale mailing list
>>> meta-freescale@yoctoproject.org <mailto:meta-freescale@yoctoproject.org>
>>> https://lists.yoctoproject.org/listinfo/meta-freescale
>>
>>
>> --
>> Daiane
>
--
Daiane
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: 回复: 回复: how to install pulseaudio completely
@ 2013-09-16 11:28 ` Daiane Angolini
0 siblings, 0 replies; 14+ messages in thread
From: Daiane Angolini @ 2013-09-16 11:28 UTC (permalink / raw)
To: jojo; +Cc: meta-freescale, yocto
On 09/16/2013 05:02 AM, jojo wrote:
> Hi,
> I need to install the "pulseaudio-server" really & start up pulseaudio
> in daemon mode,
Sorry, I have never used pulseaudio before, and i have anything else I
could say to help you.
But, your DISTRO_FEATURES does have pulseaudio, so the very first step
to have it on your machine is OK.
Do you know the command list you need?
>
> hdmi output is ok :)
>
> bitbake -e | grep ^DISTRO_FEATURES
> DISTRO_FEATURES="alsa argp bluetooth ext2 irda largefile pcmcia
> usbgadget usbhost wifi xattr nfs zeroconf pci 3g nfc x11 ipv4 ipv6
> libc-backtrace libc-big-macros libc-bsd libc-cxx-tests libc-catgets
> libc-charsets libc-crypt
> libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt libc-fmtmsg
> libc-fstab libc-ftraverse libc-getlogin libc-idn libc-inet-anl
> libc-libm libc-libm-big libc-locales libc-locale-code
> libc-memusage libc-nis libc-nsswitch libc-rcmd
> libc-rtld-debug libc-spawn libc-streams libc-sunrpc
> libc-utmp libc-utmpx libc-wordexp
> libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc
> libc-posix-wchar-io pulseaudio sysvinit
> largefile opengl multiarch wayland"
> DISTRO_FEATURES_LIBC_class-nativesdk="ipv4 ipv6 libc-backtrace
> libc-big-macros libc-bsd libc-cxx-tests libc-catgets libc-charsets
> libc-crypt libc-crypt-ufc
> libc-db-aliases libc-envz libc-fcvt libc-fmtmsg libc-fstab
> libc-ftraverse libc-getlogin libc-idn
> libc-inet-anl libc-libm libc-libm-big libc-locales libc-locale-code
> libc-memusage libc-nis
> libc-nsswitch libc-rcmd libc-rtld-debug libc-spawn libc-streams
> libc-sunrpc libc-utmp libc-utmpx libc-wordexp
> libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc
> libc-posix-wchar-io"
> DISTRO_FEATURES_BACKFILL="pulseaudio sysvinit"
> DISTRO_FEATURES_LIBC="ipv4 ipv6 libc-backtrace libc-big-macros libc-bsd
> libc-cxx-tests libc-catgets libc-charsets libc-crypt
> libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt
> libc-fmtmsg libc-fstab libc-ftraverse
> libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big
> libc-locales libc-locale-code
> libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug
> libc-spawn libc-streams libc-sunrpc libc-utmp
> libc-utmpx libc-wordexp libc-posix-clang-wchar libc-posix-regexp
> libc-posix-regexp-glibc
> libc-posix-wchar-io"
> DISTRO_FEATURES_LIBC_DEFAULT="ipv4 ipv6 libc-backtrace libc-big-macros
> libc-bsd libc-cxx-tests libc-catgets libc-charsets libc-crypt
> libc-crypt-ufc libc-db-aliases libc-envz
> libc-fcvt libc-fmtmsg libc-fstab libc-ftraverse
> libc-getlogin libc-idn libc-inet-anl libc-libm libc-libm-big
> libc-locales libc-locale-code
> libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug
> libc-spawn libc-streams libc-sunrpc libc-utmp libc-utmpx
> libc-wordexp libc-posix-clang-wchar libc-posix-regexp
> libc-posix-regexp-glibc
> libc-posix-wchar-io"
>
> Thanks,
>
> - Jojo
>
> 在 2013年9月12日星期四,下午7:29,Daiane Angolini 写道:
>
>> On 09/12/2013 07:07 AM, jojo wrote:
>>> Hi,
>>
>> Hi Jojo,
>>
>>> I installed pulse audio server in IMX6QSD of FSL, but there is no output
>>> of audio with HDMI :(
>>
>> Please, double check if pulseaudio is in your DISTRO_FEATURES (i think
>> it's default, but I cannot remember exactly)
>>
>> bitbake -e | grep ^DISTRO_FEATURES
>>
>> How are you configuring HDMI audio? I know there is a doc in
>> imx-community with the audio configuration if you want to change it from
>> default to HDMI.
>>
>>
>>>
>>> how to track the log of the pulse audio ?
>>>
>>> Thanks,
>>>
>>> - Jojo
>>>
>>> 在 2013年7月16日星期二,下午11:32,jojo 写道:
>>>
>>>> Hi,
>>>> Ok & i will have a try, thanks for your reply :)
>>>>
>>>> Thanks,
>>>>
>>>> - Jojo
>>>>
>>>> 在 2013年7月12日星期五,下午6:45,Erik Botö 写道:
>>>>
>>>>> Hi,
>>>>> On Fri, Jul 12, 2013 at 12:35 PM, jojo <rjiejie@gmail.com
>>>>> <mailto:rjiejie@gmail.com>
>>>>> <mailto:rjiejie@gmail.com>> wrote:
>>>>>> Hi,
>>>>>> My yocto version/tag is dylan.
>>>>>> I have compiled fsl-image-gui to testing the the audio output, but i
>>>>>> can not find
>>>>>> anything about for pulseaudio server to start up daemon.
>>>>>>
>>>>>> I saw the build code in the path about for
>>>>>> "build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/pulseaudio/3.0-r0/image/"
>>>>>> and it really have built all things of pulseaudio. but when i create
>>>>>> the fsl-image-gui to start up, i just find "libpulse*" in the
>>>>>> rootfs.
>>>>>>
>>>>>> I think that something wrong with pulseaudio configure so that it do
>>>>>> not install completely by default.
>>>>>
>>>>> The pulseaudio daemon is packaged as pulseaudio-server, maybe the
>>>>> image doesn't install that package by default?
>>>>> Cheers,
>>>>> Erik Botö
>>>>>
>>>>>>
>>>>>> someone know about that how to install pulseaudio completely ?
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> - Jojo
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> meta-freescale mailing list
>>>>>> meta-freescale@yoctoproject.org
>>>>>> <mailto:meta-freescale@yoctoproject.org>
>>>>>> https://lists.yoctoproject.org/listinfo/meta-freescale
>>>
>>>
>>>
>>> _______________________________________________
>>> meta-freescale mailing list
>>> meta-freescale@yoctoproject.org <mailto:meta-freescale@yoctoproject.org>
>>> https://lists.yoctoproject.org/listinfo/meta-freescale
>>
>>
>> --
>> Daiane
>
--
Daiane
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2013-09-16 11:33 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-07-12 10:35 [meta-freescale] how to install pulseaudio completely jojo
2013-07-12 10:35 ` jojo
2013-07-12 10:45 ` [meta-freescale] " Erik Botö
2013-07-12 10:45 ` Erik Botö
2013-07-16 15:32 ` 回复: meta-freescale] " jojo
2013-07-16 15:32 ` 回复: " jojo
2013-09-12 10:07 ` 回复: meta-freescale] " jojo
2013-09-12 10:07 ` 回复: " jojo
2013-09-12 11:29 ` [meta-freescale] " Daiane Angolini
2013-09-12 11:29 ` Daiane Angolini
2013-09-16 8:02 ` 回复: meta-freescale] 回复: ow " jojo
2013-09-16 8:02 ` 回复: " jojo
2013-09-16 11:28 ` 回复: [meta-freescale] 回复: how " Daiane Angolini
2013-09-16 11:28 ` 回复: " Daiane Angolini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.