* can't pull any sources anymore
@ 2015-01-09 14:10 Matthias.Heise
2015-01-09 16:08 ` Saul Wold
0 siblings, 1 reply; 6+ messages in thread
From: Matthias.Heise @ 2015-01-09 14:10 UTC (permalink / raw)
To: yocto
[-- Attachment #1: Type: text/plain, Size: 453 bytes --]
Hi,
I'm not able to pull any sources for a little time now. As test I re-tried an already working setup by again following some tutorial and trying to setup a fresh repo. The repo init works but the sync fails. I should mention that due to network limitations I replace git:// urls with https:// . Is it possible that this doesn't work anymore (I mean it is replaced but maybe the online repos don't support it anymore seamlessly)?
Thanks
Mat
[-- Attachment #2: Type: text/html, Size: 2616 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: can't pull any sources anymore
2015-01-09 14:10 can't pull any sources anymore Matthias.Heise
@ 2015-01-09 16:08 ` Saul Wold
2015-01-09 19:44 ` Michael Halstead
2015-01-12 7:19 ` Matthias.Heise
0 siblings, 2 replies; 6+ messages in thread
From: Saul Wold @ 2015-01-09 16:08 UTC (permalink / raw)
To: Matthias.Heise, yocto
On 01/09/2015 06:10 AM, Matthias.Heise@atlas-elektronik.com wrote:
> Hi,
>
> I'm not able to pull any sources for a little time now. As test I re-tried an already working setup by again following some tutorial and trying to setup a fresh repo. The repo init works but the sync fails. I should mention that due to network limitations I replace git:// urls with https:// . Is it possible that this doesn't work anymore (I mean it is replaced but maybe the online repos don't support it anymore seamlessly)?
Can you be more specific, are you talking about the git repos at
git.yoctoproject.org or some other git source?
You say a "repo init works", does that mean an initial clone or ? What
commands are you running?
I think a little more information is needed here.
Sau!
> Thanks
>
> Mat
>
>
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: can't pull any sources anymore
2015-01-09 16:08 ` Saul Wold
@ 2015-01-09 19:44 ` Michael Halstead
2015-01-12 7:19 ` Matthias.Heise
1 sibling, 0 replies; 6+ messages in thread
From: Michael Halstead @ 2015-01-09 19:44 UTC (permalink / raw)
To: yocto, Matthias.Heise
[-- Attachment #1: Type: text/plain, Size: 1418 bytes --]
On 01/09/2015 08:08 AM, Saul Wold wrote:
> On 01/09/2015 06:10 AM, Matthias.Heise@atlas-elektronik.com wrote:
>> Hi,
>>
>> I'm not able to pull any sources for a little time now. As test I
>> re-tried an already working setup by again following some tutorial
>> and trying to setup a fresh repo. The repo init works but the sync
>> fails. I should mention that due to network limitations I replace
>> git:// urls with https:// . Is it possible that this doesn't work
>> anymore (I mean it is replaced but maybe the online repos don't
>> support it anymore seamlessly)?
Mat,
Please note that the git:// and http:// URLs have a different structure.
For example,
git://git.yoctoproject.org/poky
http://git.yoctoproject.org/git/poky
https://git.yoctoproject.org/git/poky
You can find these URLs at the bottom of any project page in cgit
http://git.yoctoproject.org/cgit/cgit.cgi/poky/
Please try running "git clone https://git.yoctoproject.org/git/poky" and
if it fails send me the output.
Thank you,
Michael Halstead
Yocto Project / SysAdmin
>
> Can you be more specific, are you talking about the git repos at
> git.yoctoproject.org or some other git source?
>
> You say a "repo init works", does that mean an initial clone or ?
> What commands are you running?
>
> I think a little more information is needed here.
>
> Sau!
>
>> Thanks
>>
>> Mat
>>
>>
>>
>>
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 484 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: can't pull any sources anymore
2015-01-09 16:08 ` Saul Wold
2015-01-09 19:44 ` Michael Halstead
@ 2015-01-12 7:19 ` Matthias.Heise
2015-01-12 13:03 ` Anders Darander
1 sibling, 1 reply; 6+ messages in thread
From: Matthias.Heise @ 2015-01-12 7:19 UTC (permalink / raw)
To: sgw, yocto
[-- Attachment #1: Type: text/plain, Size: 4405 bytes --]
Hello Saul,
thanks for your reply, I'm running the "repo init" command as in many tutorials, this is the line :
repo init -u https://github.com/Freescale/fsl-community-bsp-platform -b dizzy
after the init I find following in the manifest.xml :
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<default sync-j="4" revision="master"/>
<remote fetch="git://git.yoctoproject.org" name="yocto"/>
<remote fetch="git://github.com/Freescale" name="freescale"/>
<remote fetch="git://git.openembedded.org" name="oe"/>
<project remote="yocto" revision="dizzy" name="poky" path="sources/poky"/>
<project remote="yocto" revision="dizzy" name="meta-fsl-arm" path="sources/meta-fsl-arm"/>
<project remote="oe" revision="dizzy" name="meta-openembedded" path="sources/meta-openembedded"/>
<project remote="freescale" revision="dizzy" name="fsl-community-bsp-base" path="sources/base">
<copyfile dest="README" src="README"/>
<copyfile dest="setup-environment" src="setup-environment"/>
</project>
<project remote="freescale" revision="dizzy" name="meta-fsl-arm-extra" path="sources/meta-fsl-arm-extra"/>
<project remote="freescale" revision="dizzy" name="meta-fsl-demos" path="sources/meta-fsl-demos"/>
<project remote="freescale" revision="dizzy" name="Documentation" path="sources/Documentation"/>
</manifest>
So you can see it is git.yoctoproject.org as well as others.
When running repo sync which as I understand it actually pulls the sources I get :
Fetching project Documentation
Fetching project poky
Fetching project repo
Fetching project meta-fsl-arm-extra
fatal: Invalid gitfile format: /home/theuser/fsl-community-bsp_NEWTEST/.repo/repo/.git/clone.bundle
fatal: The remote end hung up unexpectedly
Fetching projects: 12% (1/8) Fetching project fsl-community-bsp-base
Fetching projects: 25% (2/8) Fetching project meta-fsl-arm
Fetching projects: 37% (3/8) Fetching project meta-openembedded
Fetching projects: 50% (4/8) Fetching project meta-fsl-demos
error: Failed connect to git.openembedded.org:443; Connection refused while accessing https://git.openembedded.org/meta-openembedded/info/refs
fatal: HTTP request failed
Fetching projects: 62% (5/8) fatal: https://git.yoctoproject.org/poky/info/refs not found: did you run git update-server-info on the server?
fatal: https://git.yoctoproject.org/meta-fsl-arm/info/refs not found: did you run git update-server-info on the server?
error: Failed connect to git.openembedded.org:443; Connection refused while accessing https://git.openembedded.org/meta-openembedded/info/refs
fatal: HTTP request failed
fatal: https://git.yoctoproject.org/meta-fsl-arm/info/refs not found: did you run git update-server-info on the server?
fatal: https://git.yoctoproject.org/poky/info/refs not found: did you run git update-server-info on the server?
error: Cannot fetch meta-openembedded
error: Cannot fetch poky
error: Cannot fetch meta-fsl-arm
error: Exited sync due to fetch errors
and here I'm stuck ...
> -----Ursprüngliche Nachricht-----
> Von: Saul Wold [mailto:sgw@linux.intel.com]
> Gesendet: Freitag, 9. Januar 2015 17:08
> An: Heise, Matthias; yocto@yoctoproject.org
> Betreff: Re: [yocto] can't pull any sources anymore
>
> On 01/09/2015 06:10 AM, Matthias.Heise@atlas-elektronik.com<mailto:Matthias.Heise@atlas-elektronik.com> wrote:
> > Hi,
> >
> > I'm not able to pull any sources for a little time now. As test I re-tried an
> already working setup by again following some tutorial and trying to setup a
> fresh repo. The repo init works but the sync fails. I should mention that due
> to network limitations I replace git:// urls with https:// . Is it possible that this
> doesn't work anymore (I mean it is replaced but maybe the online repos
> don't support it anymore seamlessly)?
>
> Can you be more specific, are you talking about the git repos at
> git.yoctoproject.org or some other git source?
>
> You say a "repo init works", does that mean an initial clone or ? What
> commands are you running?
>
> I think a little more information is needed here.
>
> Sau!
>
> > Thanks
> >
> > Mat
> >
> >
> >
> >
[-- Attachment #2: Type: text/html, Size: 13638 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: can't pull any sources anymore
2015-01-12 7:19 ` Matthias.Heise
@ 2015-01-12 13:03 ` Anders Darander
2015-01-12 13:28 ` Matthias.Heise
0 siblings, 1 reply; 6+ messages in thread
From: Anders Darander @ 2015-01-12 13:03 UTC (permalink / raw)
To: Matthias.Heise; +Cc: yocto
* Matthias.Heise@atlas-elektronik.com <Matthias.Heise@atlas-elektronik.com> [150112 08:22]:
> thanks for your reply, I'm running the "repo init" command as in many tutorials, this is the line :
> repo init -u https://github.com/Freescale/fsl-community-bsp-platform -b dizzy
I've just tried to replicate your steps, and everything works OK.
> after the init I find following in the manifest.xml :
> <?xml version="1.0" encoding="UTF-8"?>
> <manifest>
> <default sync-j="4" revision="master"/>
> <remote fetch="git://git.yoctoproject.org" name="yocto"/>
Look here, git://git.yoctoproject.org, which should be OK.
...SNIP...
> </manifest>
> So you can see it is git.yoctoproject.org as well as others.
> When running repo sync which as I understand it actually pulls the sources I get :
> Fetching project Documentation
> Fetching project poky
> Fetching project repo
> Fetching project meta-fsl-arm-extra
> fatal: Invalid gitfile format: /home/theuser/fsl-community-bsp_NEWTEST/.repo/repo/.git/clone.bundle
> fatal: The remote end hung up unexpectedly
> Fetching projects: 12% (1/8) Fetching project fsl-community-bsp-base
> Fetching projects: 25% (2/8) Fetching project meta-fsl-arm
> Fetching projects: 37% (3/8) Fetching project meta-openembedded
> Fetching projects: 50% (4/8) Fetching project meta-fsl-demos
> error: Failed connect to git.openembedded.org:443; Connection refused while accessing https://git.openembedded.org/meta-openembedded/info/refs
> fatal: HTTP request failed
> Fetching projects: 62% (5/8) fatal: https://git.yoctoproject.org/poky/info/refs not found: did you run git update-server-info on the server?
Look here, https://git.yoctoproject.org/poky... See that the protocol
has been changed from git to https. Do you have any rules set up that
in your git-configuration that rewrites URLs? The https:// URL should
look like https://git.yoctoproject.org/git/poky/...
When `repo sync` works for me, I'm still getting the git:// URLs.
Cheers,
Anders
--
Anders Darander
ChargeStorm AB / eStorm AB
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: can't pull any sources anymore
2015-01-12 13:03 ` Anders Darander
@ 2015-01-12 13:28 ` Matthias.Heise
0 siblings, 0 replies; 6+ messages in thread
From: Matthias.Heise @ 2015-01-12 13:28 UTC (permalink / raw)
To: anders; +Cc: yocto
Hi Anders,
yes, in my git config I replace git:// with https:// I'm forced to do so as git doesn't go through the company network. If I change the url in the manifest.xml to
https://git.yoctoproject.org/git/poky/ it works on that part but I didn't find out yet how the other links should look like for https:// . So the process breaks a little later again. I'm trying to get git cleared here but don't know how the chances are. Why must the urls be different for git and https ? ... ;-)
thanks,
Mat
> -----Ursprüngliche Nachricht-----
> Von: Anders Darander [mailto:anders@chargestorm.se]
> Gesendet: Montag, 12. Januar 2015 14:04
> An: Heise, Matthias
> Cc: sgw@linux.intel.com; yocto@yoctoproject.org
> Betreff: Re: [yocto] can't pull any sources anymore
>
>
> * Matthias.Heise@atlas-elektronik.com <Matthias.Heise@atlas-
> elektronik.com> [150112 08:22]:
> > thanks for your reply, I'm running the "repo init" command as in many
> tutorials, this is the line :
>
> > repo init -u https://github.com/Freescale/fsl-community-bsp-platform
> > -b dizzy
>
> I've just tried to replicate your steps, and everything works OK.
>
> > after the init I find following in the manifest.xml :
>
> > <?xml version="1.0" encoding="UTF-8"?> <manifest>
> > <default sync-j="4" revision="master"/>
> > <remote fetch="git://git.yoctoproject.org" name="yocto"/>
>
> Look here, git://git.yoctoproject.org, which should be OK.
>
> ...SNIP...
> > </manifest>
>
>
>
> > So you can see it is git.yoctoproject.org as well as others.
>
> > When running repo sync which as I understand it actually pulls the sources I
> get :
>
>
>
> > Fetching project Documentation
>
> > Fetching project poky
>
> > Fetching project repo
>
> > Fetching project meta-fsl-arm-extra
>
> > fatal: Invalid gitfile format:
> > /home/theuser/fsl-community-
> bsp_NEWTEST/.repo/repo/.git/clone.bundle
>
> > fatal: The remote end hung up unexpectedly
>
> > Fetching projects: 12% (1/8) Fetching project fsl-community-bsp-base
>
> > Fetching projects: 25% (2/8) Fetching project meta-fsl-arm
>
> > Fetching projects: 37% (3/8) Fetching project meta-openembedded
>
> > Fetching projects: 50% (4/8) Fetching project meta-fsl-demos
>
> > error: Failed connect to git.openembedded.org:443; Connection refused
> > while accessing
> > https://git.openembedded.org/meta-openembedded/info/refs
>
> > fatal: HTTP request failed
>
> > Fetching projects: 62% (5/8) fatal:
> https://git.yoctoproject.org/poky/info/refs not found: did you run git
> update-server-info on the server?
>
> Look here, https://git.yoctoproject.org/poky... See that the protocol has
> been changed from git to https. Do you have any rules set up that in your git-
> configuration that rewrites URLs? The https:// URL should look like
> https://git.yoctoproject.org/git/poky/...
>
> When `repo sync` works for me, I'm still getting the git:// URLs.
>
> Cheers,
> Anders
>
> --
> Anders Darander
> ChargeStorm AB / eStorm AB
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-01-12 13:28 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-01-09 14:10 can't pull any sources anymore Matthias.Heise
2015-01-09 16:08 ` Saul Wold
2015-01-09 19:44 ` Michael Halstead
2015-01-12 7:19 ` Matthias.Heise
2015-01-12 13:03 ` Anders Darander
2015-01-12 13:28 ` Matthias.Heise
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.