Re: [lm-sensors] [PATCH] hwmon: (ads7828) Make sample interval configurable

From: Guenter Roeck <linux@roeck-us.net>
To: Jean Delvare <jdelvare@suse.de>,
	Robert Rosengren <robert.rosengren@axis.com>
Cc: lm-sensors <lm-sensors@lm-sensors.org>,
	Johan Adolfsson <johana@axis.com>,
	linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [lm-sensors] [PATCH] hwmon: (ads7828) Make sample interval configurable
Date: Tue, 27 Jan 2015 06:23:19 -0800	[thread overview]
Message-ID: <54C79F57.9050902@roeck-us.net> (raw)
In-Reply-To: <1422355070.4499.136.camel@chaos.site>

On 01/27/2015 02:37 AM, Jean Delvare wrote:
> Hi Robert,
>
> Le Tuesday 27 January 2015 à 08:59 +0100, Robert Rosengren a écrit :
>> On 01/16/2015 07:30 PM, Guenter Roeck wrote:
>>> I sent a couple of patches a minute ago which should take care of the issue.
>>> Would be great if you can test it.
>> I applied the v2 versions of the patches for a quick test, but it was
>> not successful. Haven't done any further investigation on what the
>> problem might be, but when trying to read the sysfs driver I get "read
>> error: No such device or address".
>>
>> The sysfs path have moved with the REGMAP settings, from
>> /sys/bus/i2c/devices/<x>/in0_input to
>> /sys/bus/i2c/devices/<x>/hwmon/hwmon0/in0_input.
>
> This is expected, shouldn't be an issue if you are using a
> libsensors-based application with a recent enough version of libsensors.
>

Odd though, thinking about it, since the move was done with a separate
patch, not with the regmap patch.

Guenter