[PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts

[PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts

[Vignesh R]

On am437x-gp-evm, pixcir_i2c_ts can wakeup the system from lower power
state via pinctrl and IO daisy chain using generic wakeirq framework.
With commit 3fffd1283927 ("i2c: allow specifying separate wakeup
interrupt in device tree") i2c core allows optional wakeirq to be
specified via device tree. Add wakeup irq entry to enable pixcir_i2c_ts
to wake the system from low power state.

Signed-off-by: Vignesh R <vigneshr@ti.com>
---
 arch/arm/boot/dts/am437x-gp-evm.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 22038f21f228..69e93af7df0d 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -581,8 +581,13 @@
 
 		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 
+		interrupts-extended = <&gpio3 22 GPIO_ACTIVE_HIGH>,
+				      <&am43xx_pinmux 0x264>;
+		interrupt-names = "tsc", "wakeup";
+
 		touchscreen-size-x = <1024>;
 		touchscreen-size-y = <600>;
+		wakeup-source;
 	};
 
 	ov2659@30 {
-- 
2.6.1

[PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts

[Vignesh R]

On am437x-gp-evm, pixcir_i2c_ts can wakeup the system from lower power
state via pinctrl and IO daisy chain using generic wakeirq framework.
With commit 3fffd1283927 ("i2c: allow specifying separate wakeup
interrupt in device tree") i2c core allows optional wakeirq to be
specified via device tree. Add wakeup irq entry to enable pixcir_i2c_ts
to wake the system from low power state.

Signed-off-by: Vignesh R <vigneshr@ti.com>
---
 arch/arm/boot/dts/am437x-gp-evm.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 22038f21f228..69e93af7df0d 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -581,8 +581,13 @@
 
 		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 
+		interrupts-extended = <&gpio3 22 GPIO_ACTIVE_HIGH>,
+				      <&am43xx_pinmux 0x264>;
+		interrupt-names = "tsc", "wakeup";
+
 		touchscreen-size-x = <1024>;
 		touchscreen-size-y = <600>;
+		wakeup-source;
 	};
 
 	ov2659 at 30 {
-- 
2.6.1

[PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts

[Vignesh R]

On am437x-gp-evm, pixcir_i2c_ts can wakeup the system from lower power
state via pinctrl and IO daisy chain using generic wakeirq framework.
With commit 3fffd1283927 ("i2c: allow specifying separate wakeup
interrupt in device tree") i2c core allows optional wakeirq to be
specified via device tree. Add wakeup irq entry to enable pixcir_i2c_ts
to wake the system from low power state.

Signed-off-by: Vignesh R <vigneshr-l0cyMroinI0@public.gmane.org>
---
 arch/arm/boot/dts/am437x-gp-evm.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 22038f21f228..69e93af7df0d 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -581,8 +581,13 @@
 
 		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 
+		interrupts-extended = <&gpio3 22 GPIO_ACTIVE_HIGH>,
+				      <&am43xx_pinmux 0x264>;
+		interrupt-names = "tsc", "wakeup";
+
 		touchscreen-size-x = <1024>;
 		touchscreen-size-y = <600>;
+		wakeup-source;
 	};
 
 	ov2659@30 {
-- 
2.6.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts

[Roger Quadros]

+Dave

On 14/10/15 08:52, Vignesh R wrote:
> On am437x-gp-evm, pixcir_i2c_ts can wakeup the system from lower power
> state via pinctrl and IO daisy chain using generic wakeirq framework.
> With commit 3fffd1283927 ("i2c: allow specifying separate wakeup
> interrupt in device tree") i2c core allows optional wakeirq to be
> specified via device tree. Add wakeup irq entry to enable pixcir_i2c_ts
> to wake the system from low power state.
> 
> Signed-off-by: Vignesh R <vigneshr@ti.com>
> ---
>  arch/arm/boot/dts/am437x-gp-evm.dts | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
> index 22038f21f228..69e93af7df0d 100644
> --- a/arch/arm/boot/dts/am437x-gp-evm.dts
> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts
> @@ -581,8 +581,13 @@
>  
>  		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
>  
> +		interrupts-extended = <&gpio3 22 GPIO_ACTIVE_HIGH>,
> +				      <&am43xx_pinmux 0x264>;

How does this work?

interrupts-extended property must have
1) interrupt parent
2) interrupt number
3) interrupt flags

Your change doesn't seem to comply with those requirements.

> +		interrupt-names = "tsc", "wakeup";
> +
>  		touchscreen-size-x = <1024>;
>  		touchscreen-size-y = <600>;
> +		wakeup-source;
>  	};
>  
>  	ov2659@30 {
> 

cheers,
-roger

[PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts

[Roger Quadros]

+Dave

On 14/10/15 08:52, Vignesh R wrote:
> On am437x-gp-evm, pixcir_i2c_ts can wakeup the system from lower power
> state via pinctrl and IO daisy chain using generic wakeirq framework.
> With commit 3fffd1283927 ("i2c: allow specifying separate wakeup
> interrupt in device tree") i2c core allows optional wakeirq to be
> specified via device tree. Add wakeup irq entry to enable pixcir_i2c_ts
> to wake the system from low power state.
> 
> Signed-off-by: Vignesh R <vigneshr@ti.com>
> ---
>  arch/arm/boot/dts/am437x-gp-evm.dts | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
> index 22038f21f228..69e93af7df0d 100644
> --- a/arch/arm/boot/dts/am437x-gp-evm.dts
> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts
> @@ -581,8 +581,13 @@
>  
>  		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
>  
> +		interrupts-extended = <&gpio3 22 GPIO_ACTIVE_HIGH>,
> +				      <&am43xx_pinmux 0x264>;

How does this work?

interrupts-extended property must have
1) interrupt parent
2) interrupt number
3) interrupt flags

Your change doesn't seem to comply with those requirements.

> +		interrupt-names = "tsc", "wakeup";
> +
>  		touchscreen-size-x = <1024>;
>  		touchscreen-size-y = <600>;
> +		wakeup-source;
>  	};
>  
>  	ov2659 at 30 {
> 

cheers,
-roger

Re: [PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts

[Roger Quadros]

+Dave

On 14/10/15 08:52, Vignesh R wrote:
> On am437x-gp-evm, pixcir_i2c_ts can wakeup the system from lower power
> state via pinctrl and IO daisy chain using generic wakeirq framework.
> With commit 3fffd1283927 ("i2c: allow specifying separate wakeup
> interrupt in device tree") i2c core allows optional wakeirq to be
> specified via device tree. Add wakeup irq entry to enable pixcir_i2c_ts
> to wake the system from low power state.
> 
> Signed-off-by: Vignesh R <vigneshr-l0cyMroinI0@public.gmane.org>
> ---
>  arch/arm/boot/dts/am437x-gp-evm.dts | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
> index 22038f21f228..69e93af7df0d 100644
> --- a/arch/arm/boot/dts/am437x-gp-evm.dts
> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts
> @@ -581,8 +581,13 @@
>  
>  		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
>  
> +		interrupts-extended = <&gpio3 22 GPIO_ACTIVE_HIGH>,
> +				      <&am43xx_pinmux 0x264>;

How does this work?

interrupts-extended property must have
1) interrupt parent
2) interrupt number
3) interrupt flags

Your change doesn't seem to comply with those requirements.

> +		interrupt-names = "tsc", "wakeup";
> +
>  		touchscreen-size-x = <1024>;
>  		touchscreen-size-y = <600>;
> +		wakeup-source;
>  	};
>  
>  	ov2659@30 {
> 

cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts

[Vignesh R]

On 10/14/2015 02:16 PM, Roger Quadros wrote:

> 
> On 14/10/15 08:52, Vignesh R wrote:
>> On am437x-gp-evm, pixcir_i2c_ts can wakeup the system from lower power
>> state via pinctrl and IO daisy chain using generic wakeirq framework.
>> With commit 3fffd1283927 ("i2c: allow specifying separate wakeup
>> interrupt in device tree") i2c core allows optional wakeirq to be
>> specified via device tree. Add wakeup irq entry to enable pixcir_i2c_ts
>> to wake the system from low power state.
>>
>> Signed-off-by: Vignesh R <vigneshr@ti.com>
>> ---
>>  arch/arm/boot/dts/am437x-gp-evm.dts | 5 +++++
>>  1 file changed, 5 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
>> index 22038f21f228..69e93af7df0d 100644
>> --- a/arch/arm/boot/dts/am437x-gp-evm.dts
>> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts
>> @@ -581,8 +581,13 @@
>>  
>>  		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
>>  
>> +		interrupts-extended = <&gpio3 22 GPIO_ACTIVE_HIGH>,
>> +				      <&am43xx_pinmux 0x264>;
> 
> How does this work?
> 
> interrupts-extended property must have
> 1) interrupt parent
> 2) interrupt number
> 3) interrupt flags
> 
> Your change doesn't seem to comply with those requirements.

AFAIU, interrupts-extended has two parts: interrupt parent phandle and
interrupt specifier.
The number of cells in interrupt specifier is determined by
interrupt-cells property of interrupt parent node.
In above case, gpio3 has interrupt-cells = 2 hence interrupt specifier
has interrupt number and interrupt flag field.
But in case am43xx_pinmux node, interrupt-cells is 1 hence has no
interrupt flag field.

-- 
Regards
Vignesh

[PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts

[Vignesh R]

On 10/14/2015 02:16 PM, Roger Quadros wrote:

> 
> On 14/10/15 08:52, Vignesh R wrote:
>> On am437x-gp-evm, pixcir_i2c_ts can wakeup the system from lower power
>> state via pinctrl and IO daisy chain using generic wakeirq framework.
>> With commit 3fffd1283927 ("i2c: allow specifying separate wakeup
>> interrupt in device tree") i2c core allows optional wakeirq to be
>> specified via device tree. Add wakeup irq entry to enable pixcir_i2c_ts
>> to wake the system from low power state.
>>
>> Signed-off-by: Vignesh R <vigneshr@ti.com>
>> ---
>>  arch/arm/boot/dts/am437x-gp-evm.dts | 5 +++++
>>  1 file changed, 5 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
>> index 22038f21f228..69e93af7df0d 100644
>> --- a/arch/arm/boot/dts/am437x-gp-evm.dts
>> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts
>> @@ -581,8 +581,13 @@
>>  
>>  		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
>>  
>> +		interrupts-extended = <&gpio3 22 GPIO_ACTIVE_HIGH>,
>> +				      <&am43xx_pinmux 0x264>;
> 
> How does this work?
> 
> interrupts-extended property must have
> 1) interrupt parent
> 2) interrupt number
> 3) interrupt flags
> 
> Your change doesn't seem to comply with those requirements.

AFAIU, interrupts-extended has two parts: interrupt parent phandle and
interrupt specifier.
The number of cells in interrupt specifier is determined by
interrupt-cells property of interrupt parent node.
In above case, gpio3 has interrupt-cells = 2 hence interrupt specifier
has interrupt number and interrupt flag field.
But in case am43xx_pinmux node, interrupt-cells is 1 hence has no
interrupt flag field.

-- 
Regards
Vignesh

Re: [PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts

[Vignesh R]

On 10/14/2015 02:16 PM, Roger Quadros wrote:

> 
> On 14/10/15 08:52, Vignesh R wrote:
>> On am437x-gp-evm, pixcir_i2c_ts can wakeup the system from lower power
>> state via pinctrl and IO daisy chain using generic wakeirq framework.
>> With commit 3fffd1283927 ("i2c: allow specifying separate wakeup
>> interrupt in device tree") i2c core allows optional wakeirq to be
>> specified via device tree. Add wakeup irq entry to enable pixcir_i2c_ts
>> to wake the system from low power state.
>>
>> Signed-off-by: Vignesh R <vigneshr@ti.com>
>> ---
>>  arch/arm/boot/dts/am437x-gp-evm.dts | 5 +++++
>>  1 file changed, 5 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
>> index 22038f21f228..69e93af7df0d 100644
>> --- a/arch/arm/boot/dts/am437x-gp-evm.dts
>> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts
>> @@ -581,8 +581,13 @@
>>  
>>  		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
>>  
>> +		interrupts-extended = <&gpio3 22 GPIO_ACTIVE_HIGH>,
>> +				      <&am43xx_pinmux 0x264>;
> 
> How does this work?
> 
> interrupts-extended property must have
> 1) interrupt parent
> 2) interrupt number
> 3) interrupt flags
> 
> Your change doesn't seem to comply with those requirements.

AFAIU, interrupts-extended has two parts: interrupt parent phandle and
interrupt specifier.
The number of cells in interrupt specifier is determined by
interrupt-cells property of interrupt parent node.
In above case, gpio3 has interrupt-cells = 2 hence interrupt specifier
has interrupt number and interrupt flag field.
But in case am43xx_pinmux node, interrupt-cells is 1 hence has no
interrupt flag field.

-- 
Regards
Vignesh

Re: [PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts

[Roger Quadros]

Vignesh,

On 14/10/15 12:12, Vignesh R wrote:
> 
> 
> On 10/14/2015 02:16 PM, Roger Quadros wrote:
> 
>>
>> On 14/10/15 08:52, Vignesh R wrote:
>>> On am437x-gp-evm, pixcir_i2c_ts can wakeup the system from lower power
>>> state via pinctrl and IO daisy chain using generic wakeirq framework.
>>> With commit 3fffd1283927 ("i2c: allow specifying separate wakeup
>>> interrupt in device tree") i2c core allows optional wakeirq to be
>>> specified via device tree. Add wakeup irq entry to enable pixcir_i2c_ts
>>> to wake the system from low power state.
>>>
>>> Signed-off-by: Vignesh R <vigneshr@ti.com>
>>> ---
>>>  arch/arm/boot/dts/am437x-gp-evm.dts | 5 +++++
>>>  1 file changed, 5 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
>>> index 22038f21f228..69e93af7df0d 100644
>>> --- a/arch/arm/boot/dts/am437x-gp-evm.dts
>>> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts
>>> @@ -581,8 +581,13 @@
>>>  
>>>  		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
>>>  
>>> +		interrupts-extended = <&gpio3 22 GPIO_ACTIVE_HIGH>,
>>> +				      <&am43xx_pinmux 0x264>;
>>
>> How does this work?
>>
>> interrupts-extended property must have
>> 1) interrupt parent
>> 2) interrupt number
>> 3) interrupt flags
>>
>> Your change doesn't seem to comply with those requirements.
> 
> AFAIU, interrupts-extended has two parts: interrupt parent phandle and
> interrupt specifier.
> The number of cells in interrupt specifier is determined by
> interrupt-cells property of interrupt parent node.

Got it.

> In above case, gpio3 has interrupt-cells = 2 hence interrupt specifier
> has interrupt number and interrupt flag field.

But is GPIO_ACTIVE_HIGH an interrupt flag?

> But in case am43xx_pinmux node, interrupt-cells is 1 hence has no
> interrupt flag field.
> 
Understood, thanks. Might be worth adding a comment as to what 0x264 means though.

cheers,
-roger

[PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts

[Roger Quadros]

Vignesh,

On 14/10/15 12:12, Vignesh R wrote:
> 
> 
> On 10/14/2015 02:16 PM, Roger Quadros wrote:
> 
>>
>> On 14/10/15 08:52, Vignesh R wrote:
>>> On am437x-gp-evm, pixcir_i2c_ts can wakeup the system from lower power
>>> state via pinctrl and IO daisy chain using generic wakeirq framework.
>>> With commit 3fffd1283927 ("i2c: allow specifying separate wakeup
>>> interrupt in device tree") i2c core allows optional wakeirq to be
>>> specified via device tree. Add wakeup irq entry to enable pixcir_i2c_ts
>>> to wake the system from low power state.
>>>
>>> Signed-off-by: Vignesh R <vigneshr@ti.com>
>>> ---
>>>  arch/arm/boot/dts/am437x-gp-evm.dts | 5 +++++
>>>  1 file changed, 5 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
>>> index 22038f21f228..69e93af7df0d 100644
>>> --- a/arch/arm/boot/dts/am437x-gp-evm.dts
>>> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts
>>> @@ -581,8 +581,13 @@
>>>  
>>>  		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
>>>  
>>> +		interrupts-extended = <&gpio3 22 GPIO_ACTIVE_HIGH>,
>>> +				      <&am43xx_pinmux 0x264>;
>>
>> How does this work?
>>
>> interrupts-extended property must have
>> 1) interrupt parent
>> 2) interrupt number
>> 3) interrupt flags
>>
>> Your change doesn't seem to comply with those requirements.
> 
> AFAIU, interrupts-extended has two parts: interrupt parent phandle and
> interrupt specifier.
> The number of cells in interrupt specifier is determined by
> interrupt-cells property of interrupt parent node.

Got it.

> In above case, gpio3 has interrupt-cells = 2 hence interrupt specifier
> has interrupt number and interrupt flag field.

But is GPIO_ACTIVE_HIGH an interrupt flag?

> But in case am43xx_pinmux node, interrupt-cells is 1 hence has no
> interrupt flag field.
> 
Understood, thanks. Might be worth adding a comment as to what 0x264 means though.

cheers,
-roger

Re: [PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts

[Roger Quadros]

Vignesh,

On 14/10/15 12:12, Vignesh R wrote:
> 
> 
> On 10/14/2015 02:16 PM, Roger Quadros wrote:
> 
>>
>> On 14/10/15 08:52, Vignesh R wrote:
>>> On am437x-gp-evm, pixcir_i2c_ts can wakeup the system from lower power
>>> state via pinctrl and IO daisy chain using generic wakeirq framework.
>>> With commit 3fffd1283927 ("i2c: allow specifying separate wakeup
>>> interrupt in device tree") i2c core allows optional wakeirq to be
>>> specified via device tree. Add wakeup irq entry to enable pixcir_i2c_ts
>>> to wake the system from low power state.
>>>
>>> Signed-off-by: Vignesh R <vigneshr@ti.com>
>>> ---
>>>  arch/arm/boot/dts/am437x-gp-evm.dts | 5 +++++
>>>  1 file changed, 5 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
>>> index 22038f21f228..69e93af7df0d 100644
>>> --- a/arch/arm/boot/dts/am437x-gp-evm.dts
>>> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts
>>> @@ -581,8 +581,13 @@
>>>  
>>>  		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
>>>  
>>> +		interrupts-extended = <&gpio3 22 GPIO_ACTIVE_HIGH>,
>>> +				      <&am43xx_pinmux 0x264>;
>>
>> How does this work?
>>
>> interrupts-extended property must have
>> 1) interrupt parent
>> 2) interrupt number
>> 3) interrupt flags
>>
>> Your change doesn't seem to comply with those requirements.
> 
> AFAIU, interrupts-extended has two parts: interrupt parent phandle and
> interrupt specifier.
> The number of cells in interrupt specifier is determined by
> interrupt-cells property of interrupt parent node.

Got it.

> In above case, gpio3 has interrupt-cells = 2 hence interrupt specifier
> has interrupt number and interrupt flag field.

But is GPIO_ACTIVE_HIGH an interrupt flag?

> But in case am43xx_pinmux node, interrupt-cells is 1 hence has no
> interrupt flag field.
> 
Understood, thanks. Might be worth adding a comment as to what 0x264 means though.

cheers,
-roger

Re: [PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts

[Vignesh R]

On 10/14/2015 04:34 PM, Roger Quadros wrote:
> Vignesh,
> 
> On 14/10/15 12:12, Vignesh R wrote:
>>
>>
>> On 10/14/2015 02:16 PM, Roger Quadros wrote:
>>
>>>
>>> On 14/10/15 08:52, Vignesh R wrote:
>>>> On am437x-gp-evm, pixcir_i2c_ts can wakeup the system from lower power
>>>> state via pinctrl and IO daisy chain using generic wakeirq framework.
>>>> With commit 3fffd1283927 ("i2c: allow specifying separate wakeup
>>>> interrupt in device tree") i2c core allows optional wakeirq to be
>>>> specified via device tree. Add wakeup irq entry to enable pixcir_i2c_ts
>>>> to wake the system from low power state.
>>>>
>>>> Signed-off-by: Vignesh R <vigneshr@ti.com>
>>>> ---
>>>>  arch/arm/boot/dts/am437x-gp-evm.dts | 5 +++++
>>>>  1 file changed, 5 insertions(+)
>>>>
>>>> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
>>>> index 22038f21f228..69e93af7df0d 100644
>>>> --- a/arch/arm/boot/dts/am437x-gp-evm.dts
>>>> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts
>>>> @@ -581,8 +581,13 @@
>>>>  
>>>>  		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
>>>>  
>>>> +		interrupts-extended = <&gpio3 22 GPIO_ACTIVE_HIGH>,
>>>> +				      <&am43xx_pinmux 0x264>;
>>>
>>> How does this work?
>>>
>>> interrupts-extended property must have
>>> 1) interrupt parent
>>> 2) interrupt number
>>> 3) interrupt flags
>>>
>>> Your change doesn't seem to comply with those requirements.
>>
>> AFAIU, interrupts-extended has two parts: interrupt parent phandle and
>> interrupt specifier.
>> The number of cells in interrupt specifier is determined by
>> interrupt-cells property of interrupt parent node.
> 
> Got it.
> 
>> In above case, gpio3 has interrupt-cells = 2 hence interrupt specifier
>> has interrupt number and interrupt flag field.
> 
> But is GPIO_ACTIVE_HIGH an interrupt flag?

Oops.. I will change it to IRQ_TYPE_NONE as represented in interrupts
property.

> 
>> But in case am43xx_pinmux node, interrupt-cells is 1 hence has no
>> interrupt flag field.
>>
> Understood, thanks. Might be worth adding a comment as to what 0x264 means though.
> 

Will add a one line comment indicating its the offset of gpio3_22
padconf register from am43xx_pinmux base.

> cheers,
> -roger
> 

-- 
Regards
Vignesh

[PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts

[Vignesh R]

On 10/14/2015 04:34 PM, Roger Quadros wrote:
> Vignesh,
> 
> On 14/10/15 12:12, Vignesh R wrote:
>>
>>
>> On 10/14/2015 02:16 PM, Roger Quadros wrote:
>>
>>>
>>> On 14/10/15 08:52, Vignesh R wrote:
>>>> On am437x-gp-evm, pixcir_i2c_ts can wakeup the system from lower power
>>>> state via pinctrl and IO daisy chain using generic wakeirq framework.
>>>> With commit 3fffd1283927 ("i2c: allow specifying separate wakeup
>>>> interrupt in device tree") i2c core allows optional wakeirq to be
>>>> specified via device tree. Add wakeup irq entry to enable pixcir_i2c_ts
>>>> to wake the system from low power state.
>>>>
>>>> Signed-off-by: Vignesh R <vigneshr@ti.com>
>>>> ---
>>>>  arch/arm/boot/dts/am437x-gp-evm.dts | 5 +++++
>>>>  1 file changed, 5 insertions(+)
>>>>
>>>> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
>>>> index 22038f21f228..69e93af7df0d 100644
>>>> --- a/arch/arm/boot/dts/am437x-gp-evm.dts
>>>> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts
>>>> @@ -581,8 +581,13 @@
>>>>  
>>>>  		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
>>>>  
>>>> +		interrupts-extended = <&gpio3 22 GPIO_ACTIVE_HIGH>,
>>>> +				      <&am43xx_pinmux 0x264>;
>>>
>>> How does this work?
>>>
>>> interrupts-extended property must have
>>> 1) interrupt parent
>>> 2) interrupt number
>>> 3) interrupt flags
>>>
>>> Your change doesn't seem to comply with those requirements.
>>
>> AFAIU, interrupts-extended has two parts: interrupt parent phandle and
>> interrupt specifier.
>> The number of cells in interrupt specifier is determined by
>> interrupt-cells property of interrupt parent node.
> 
> Got it.
> 
>> In above case, gpio3 has interrupt-cells = 2 hence interrupt specifier
>> has interrupt number and interrupt flag field.
> 
> But is GPIO_ACTIVE_HIGH an interrupt flag?

Oops.. I will change it to IRQ_TYPE_NONE as represented in interrupts
property.

> 
>> But in case am43xx_pinmux node, interrupt-cells is 1 hence has no
>> interrupt flag field.
>>
> Understood, thanks. Might be worth adding a comment as to what 0x264 means though.
> 

Will add a one line comment indicating its the offset of gpio3_22
padconf register from am43xx_pinmux base.

> cheers,
> -roger
> 

-- 
Regards
Vignesh

Re: [PATCH] ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts

[Vignesh R]

On 10/14/2015 04:34 PM, Roger Quadros wrote:
> Vignesh,
> 
> On 14/10/15 12:12, Vignesh R wrote:
>>
>>
>> On 10/14/2015 02:16 PM, Roger Quadros wrote:
>>
>>>
>>> On 14/10/15 08:52, Vignesh R wrote:
>>>> On am437x-gp-evm, pixcir_i2c_ts can wakeup the system from lower power
>>>> state via pinctrl and IO daisy chain using generic wakeirq framework.
>>>> With commit 3fffd1283927 ("i2c: allow specifying separate wakeup
>>>> interrupt in device tree") i2c core allows optional wakeirq to be
>>>> specified via device tree. Add wakeup irq entry to enable pixcir_i2c_ts
>>>> to wake the system from low power state.
>>>>
>>>> Signed-off-by: Vignesh R <vigneshr-l0cyMroinI0@public.gmane.org>
>>>> ---
>>>>  arch/arm/boot/dts/am437x-gp-evm.dts | 5 +++++
>>>>  1 file changed, 5 insertions(+)
>>>>
>>>> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
>>>> index 22038f21f228..69e93af7df0d 100644
>>>> --- a/arch/arm/boot/dts/am437x-gp-evm.dts
>>>> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts
>>>> @@ -581,8 +581,13 @@
>>>>  
>>>>  		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
>>>>  
>>>> +		interrupts-extended = <&gpio3 22 GPIO_ACTIVE_HIGH>,
>>>> +				      <&am43xx_pinmux 0x264>;
>>>
>>> How does this work?
>>>
>>> interrupts-extended property must have
>>> 1) interrupt parent
>>> 2) interrupt number
>>> 3) interrupt flags
>>>
>>> Your change doesn't seem to comply with those requirements.
>>
>> AFAIU, interrupts-extended has two parts: interrupt parent phandle and
>> interrupt specifier.
>> The number of cells in interrupt specifier is determined by
>> interrupt-cells property of interrupt parent node.
> 
> Got it.
> 
>> In above case, gpio3 has interrupt-cells = 2 hence interrupt specifier
>> has interrupt number and interrupt flag field.
> 
> But is GPIO_ACTIVE_HIGH an interrupt flag?

Oops.. I will change it to IRQ_TYPE_NONE as represented in interrupts
property.

> 
>> But in case am43xx_pinmux node, interrupt-cells is 1 hence has no
>> interrupt flag field.
>>
> Understood, thanks. Might be worth adding a comment as to what 0x264 means though.
> 

Will add a one line comment indicating its the offset of gpio3_22
padconf register from am43xx_pinmux base.

> cheers,
> -roger
> 

-- 
Regards
Vignesh
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html