* [PATCH v3 00/18] *** SUBJECT HERE ***
@ 2015-12-01 13:02 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc; +Cc: linux-kernel, cmetcalf, Noam Camus
From: Noam Camus <noamc@ezchip.com>
v3:
1) irqchip: use MACROS instead of structures to decribe
registers.
2) clocksource: use 32bit counter and avoid 2 halfs read
of 64bit dance.
v2:
1) Remove out of tree platform include path
2) Move atomic/bitop/cmpxchg for platform to end.
Remove macro duplication.
Fix some bad implementation.
3) define cpu_relax_lowlatency() for platform.
4) rename init_irq_cpu() to init_per_cpu()
reorder call to init_per_cpu() for secondary
use it instead of init_cpu_smp().
5) set res_service to call stext
6) fix build failure for CTOP_AUX_BASE at assembly code
7) Use ilog2 for mtm_init_nat()
8) Add CLKSRC_NPS option to Kconfig
change nps_clksrc_read() to be more readable.
General summay:
This set introduce new platform to ARC architecture.
Platform name called "eznps" for working with EZchip NPS400
Network Proccessor.
NPS400 is targeted to service "fast path" network applications.
NPS400 got mesh of 256 extended ARC cores (AKA CTOP), each core
got 16 HW threads. This is basically SMT core where at any point of
time only one HW thread is active.
Each core have HW scheduler that round robin between eligible HW
threads. Totaly, kernel sees 4096 CPUs which I belive is a high record.
There is no cache coherency between cores so generic user applications
and kernel do not use D$.
Cores got special memory mappings for huge pages (8MB).
Mapping is static and should provide application enough memory without
any "TLB miss". This mapping is on top of TLB mapping.
This is a basic set that will later be followed with additional
set of patches with all advanced features.
Many thanks to all people helping to make this happen.
Regards,
Noam Camus
Noam Camus (17):
Documentation: Add EZchip vendor to binding list
ARC: [plat-eznps] define IPI_IRQ
clocksource: Add NPS400 timers driver
irqchip: add nps Internal and external irqchips
ARC: Set vmalloc size from configuration
ARC: rwlock: disable interrupts in !LLSC variant
ARC: rename smp operation init_irq_cpu() to init_per_cpu()
ARC: Mark secondary cpu online only after all HW setup is done
ARC: add CONFIG_CLKSRC_OF support to time_init()
ARC: [plat-eznps] Add eznps board defconfig and dts
ARC: [plat-eznps] Add eznps platform
ARC: [plat-eznps] Use dedicated user stack top
ARC: [plat-eznps] Use dedicated atomic/bitops/cmpxchg
ARC: [plat-eznps] Use dedicated SMP barriers
ARC: [plat-eznps] Use dedicated identity auxiliary register.
ARC: [plat-eznps] Use dedicated COMMAND_LINE_SIZE
ARC: Add eznps platform to Kconfig and Makefile
Tal Zilcer (1):
ARC: [plat-eznps] Use dedicated cpu_relax()
Documentation/devicetree/bindings/arc/eznps.txt | 7 +
.../interrupt-controller/ezchip,nps400-ic.txt | 17 ++
.../bindings/timer/ezchip,nps400-timer.txt | 11 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
MAINTAINERS | 6 +
arch/arc/Kconfig | 9 +
arch/arc/Makefile | 5 +
arch/arc/boot/dts/eznps.dts | 76 ++++++
arch/arc/configs/nps_defconfig | 85 +++++++
arch/arc/include/asm/atomic.h | 79 ++++++-
arch/arc/include/asm/barrier.h | 8 +
arch/arc/include/asm/bitops.h | 54 +++++
arch/arc/include/asm/cmpxchg.h | 87 ++++++--
arch/arc/include/asm/entry-compact.h | 8 +
arch/arc/include/asm/irq.h | 4 +
arch/arc/include/asm/pgtable.h | 2 +-
arch/arc/include/asm/processor.h | 36 +++-
arch/arc/include/asm/setup.h | 4 +
arch/arc/include/asm/smp.h | 4 +-
arch/arc/include/asm/spinlock.h | 14 +
arch/arc/kernel/ctx_sw.c | 13 +
arch/arc/kernel/irq.c | 4 +-
arch/arc/kernel/mcip.c | 2 +-
arch/arc/kernel/smp.c | 14 +-
arch/arc/kernel/time.c | 4 +
arch/arc/mm/tlb.c | 12 +
arch/arc/plat-eznps/Kconfig | 34 +++
arch/arc/plat-eznps/Makefile | 7 +
arch/arc/plat-eznps/entry.S | 75 ++++++
arch/arc/plat-eznps/include/plat/ctop.h | 250 ++++++++++++++++++++
arch/arc/plat-eznps/include/plat/mtm.h | 60 +++++
arch/arc/plat-eznps/include/plat/smp.h | 26 ++
arch/arc/plat-eznps/mtm.c | 133 +++++++++++
arch/arc/plat-eznps/platform.c | 27 ++
arch/arc/plat-eznps/smp.c | 149 ++++++++++++
drivers/clocksource/Kconfig | 7 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-nps.c | 63 +++++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-eznps.c | 213 +++++++++++++++++
40 files changed, 1576 insertions(+), 36 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arc/eznps.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt
create mode 100644 Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt
create mode 100644 arch/arc/boot/dts/eznps.dts
create mode 100644 arch/arc/configs/nps_defconfig
create mode 100644 arch/arc/plat-eznps/Kconfig
create mode 100644 arch/arc/plat-eznps/Makefile
create mode 100644 arch/arc/plat-eznps/entry.S
create mode 100644 arch/arc/plat-eznps/include/plat/ctop.h
create mode 100644 arch/arc/plat-eznps/include/plat/mtm.h
create mode 100644 arch/arc/plat-eznps/include/plat/smp.h
create mode 100644 arch/arc/plat-eznps/mtm.c
create mode 100644 arch/arc/plat-eznps/platform.c
create mode 100644 arch/arc/plat-eznps/smp.c
create mode 100644 drivers/clocksource/timer-nps.c
create mode 100644 drivers/irqchip/irq-eznps.c
^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH v3 00/18] *** SUBJECT HERE ***
@ 2015-12-01 13:02 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc
From: Noam Camus <noamc@ezchip.com>
v3:
1) irqchip: use MACROS instead of structures to decribe
registers.
2) clocksource: use 32bit counter and avoid 2 halfs read
of 64bit dance.
v2:
1) Remove out of tree platform include path
2) Move atomic/bitop/cmpxchg for platform to end.
Remove macro duplication.
Fix some bad implementation.
3) define cpu_relax_lowlatency() for platform.
4) rename init_irq_cpu() to init_per_cpu()
reorder call to init_per_cpu() for secondary
use it instead of init_cpu_smp().
5) set res_service to call stext
6) fix build failure for CTOP_AUX_BASE at assembly code
7) Use ilog2 for mtm_init_nat()
8) Add CLKSRC_NPS option to Kconfig
change nps_clksrc_read() to be more readable.
General summay:
This set introduce new platform to ARC architecture.
Platform name called "eznps" for working with EZchip NPS400
Network Proccessor.
NPS400 is targeted to service "fast path" network applications.
NPS400 got mesh of 256 extended ARC cores (AKA CTOP), each core
got 16 HW threads. This is basically SMT core where at any point of
time only one HW thread is active.
Each core have HW scheduler that round robin between eligible HW
threads. Totaly, kernel sees 4096 CPUs which I belive is a high record.
There is no cache coherency between cores so generic user applications
and kernel do not use D$.
Cores got special memory mappings for huge pages (8MB).
Mapping is static and should provide application enough memory without
any "TLB miss". This mapping is on top of TLB mapping.
This is a basic set that will later be followed with additional
set of patches with all advanced features.
Many thanks to all people helping to make this happen.
Regards,
Noam Camus
Noam Camus (17):
Documentation: Add EZchip vendor to binding list
ARC: [plat-eznps] define IPI_IRQ
clocksource: Add NPS400 timers driver
irqchip: add nps Internal and external irqchips
ARC: Set vmalloc size from configuration
ARC: rwlock: disable interrupts in !LLSC variant
ARC: rename smp operation init_irq_cpu() to init_per_cpu()
ARC: Mark secondary cpu online only after all HW setup is done
ARC: add CONFIG_CLKSRC_OF support to time_init()
ARC: [plat-eznps] Add eznps board defconfig and dts
ARC: [plat-eznps] Add eznps platform
ARC: [plat-eznps] Use dedicated user stack top
ARC: [plat-eznps] Use dedicated atomic/bitops/cmpxchg
ARC: [plat-eznps] Use dedicated SMP barriers
ARC: [plat-eznps] Use dedicated identity auxiliary register.
ARC: [plat-eznps] Use dedicated COMMAND_LINE_SIZE
ARC: Add eznps platform to Kconfig and Makefile
Tal Zilcer (1):
ARC: [plat-eznps] Use dedicated cpu_relax()
Documentation/devicetree/bindings/arc/eznps.txt | 7 +
.../interrupt-controller/ezchip,nps400-ic.txt | 17 ++
.../bindings/timer/ezchip,nps400-timer.txt | 11 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
MAINTAINERS | 6 +
arch/arc/Kconfig | 9 +
arch/arc/Makefile | 5 +
arch/arc/boot/dts/eznps.dts | 76 ++++++
arch/arc/configs/nps_defconfig | 85 +++++++
arch/arc/include/asm/atomic.h | 79 ++++++-
arch/arc/include/asm/barrier.h | 8 +
arch/arc/include/asm/bitops.h | 54 +++++
arch/arc/include/asm/cmpxchg.h | 87 ++++++--
arch/arc/include/asm/entry-compact.h | 8 +
arch/arc/include/asm/irq.h | 4 +
arch/arc/include/asm/pgtable.h | 2 +-
arch/arc/include/asm/processor.h | 36 +++-
arch/arc/include/asm/setup.h | 4 +
arch/arc/include/asm/smp.h | 4 +-
arch/arc/include/asm/spinlock.h | 14 +
arch/arc/kernel/ctx_sw.c | 13 +
arch/arc/kernel/irq.c | 4 +-
arch/arc/kernel/mcip.c | 2 +-
arch/arc/kernel/smp.c | 14 +-
arch/arc/kernel/time.c | 4 +
arch/arc/mm/tlb.c | 12 +
arch/arc/plat-eznps/Kconfig | 34 +++
arch/arc/plat-eznps/Makefile | 7 +
arch/arc/plat-eznps/entry.S | 75 ++++++
arch/arc/plat-eznps/include/plat/ctop.h | 250 ++++++++++++++++++++
arch/arc/plat-eznps/include/plat/mtm.h | 60 +++++
arch/arc/plat-eznps/include/plat/smp.h | 26 ++
arch/arc/plat-eznps/mtm.c | 133 +++++++++++
arch/arc/plat-eznps/platform.c | 27 ++
arch/arc/plat-eznps/smp.c | 149 ++++++++++++
drivers/clocksource/Kconfig | 7 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-nps.c | 63 +++++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-eznps.c | 213 +++++++++++++++++
40 files changed, 1576 insertions(+), 36 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arc/eznps.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt
create mode 100644 Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt
create mode 100644 arch/arc/boot/dts/eznps.dts
create mode 100644 arch/arc/configs/nps_defconfig
create mode 100644 arch/arc/plat-eznps/Kconfig
create mode 100644 arch/arc/plat-eznps/Makefile
create mode 100644 arch/arc/plat-eznps/entry.S
create mode 100644 arch/arc/plat-eznps/include/plat/ctop.h
create mode 100644 arch/arc/plat-eznps/include/plat/mtm.h
create mode 100644 arch/arc/plat-eznps/include/plat/smp.h
create mode 100644 arch/arc/plat-eznps/mtm.c
create mode 100644 arch/arc/plat-eznps/platform.c
create mode 100644 arch/arc/plat-eznps/smp.c
create mode 100644 drivers/clocksource/timer-nps.c
create mode 100644 drivers/irqchip/irq-eznps.c
^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH v3 01/18] Documentation: Add EZchip vendor to binding list
2015-12-01 13:02 ` Noam Camus
@ 2015-12-01 13:02 ` Noam Camus
-1 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc; +Cc: linux-kernel, cmetcalf, Noam Camus, Pawel Moll
From: Noam Camus <noamc@ezchip.com>
Add EZchip to vendor prefixes list.
EZchip introduce the NPS platform for the ARC architecture.
Signed-off-by: Noam Camus <noamc@ezchip.com>
Acked-by: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
---
Documentation/devicetree/bindings/arc/eznps.txt | 7 +++++++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
2 files changed, 8 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arc/eznps.txt
diff --git a/Documentation/devicetree/bindings/arc/eznps.txt b/Documentation/devicetree/bindings/arc/eznps.txt
new file mode 100644
index 0000000..f8b5e9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arc/eznps.txt
@@ -0,0 +1,7 @@
+EZchip NPS Network Proccessor Platforms Device Tree Bindings
+---------------------------------------------------------------------------
+
+Appliance main board with NPS400 ASIC.
+
+Required root node properties:
+ - compatible = "ezchip,arc-nps";
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 55df1d4..d7bff8a 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -82,6 +82,7 @@ eukrea Eukréa Electromatique
everest Everest Semiconductor Co. Ltd.
everspin Everspin Technologies, Inc.
excito Excito
+ezchip EZchip Semiconductor
fcs Fairchild Semiconductor
firefly Firefly
focaltech FocalTech Systems Co.,Ltd
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 01/18] Documentation: Add EZchip vendor to binding list
@ 2015-12-01 13:02 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc
From: Noam Camus <noamc@ezchip.com>
Add EZchip to vendor prefixes list.
EZchip introduce the NPS platform for the ARC architecture.
Signed-off-by: Noam Camus <noamc at ezchip.com>
Acked-by: Rob Herring <robh+dt at kernel.org>
Cc: Pawel Moll <pawel.moll at arm.com>
---
Documentation/devicetree/bindings/arc/eznps.txt | 7 +++++++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
2 files changed, 8 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arc/eznps.txt
diff --git a/Documentation/devicetree/bindings/arc/eznps.txt b/Documentation/devicetree/bindings/arc/eznps.txt
new file mode 100644
index 0000000..f8b5e9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arc/eznps.txt
@@ -0,0 +1,7 @@
+EZchip NPS Network Proccessor Platforms Device Tree Bindings
+---------------------------------------------------------------------------
+
+Appliance main board with NPS400 ASIC.
+
+Required root node properties:
+ - compatible = "ezchip,arc-nps";
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 55df1d4..d7bff8a 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -82,6 +82,7 @@ eukrea Eukr??a Electromatique
everest Everest Semiconductor Co. Ltd.
everspin Everspin Technologies, Inc.
excito Excito
+ezchip EZchip Semiconductor
fcs Fairchild Semiconductor
firefly Firefly
focaltech FocalTech Systems Co.,Ltd
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 02/18] ARC: [plat-eznps] define IPI_IRQ
2015-12-01 13:02 ` Noam Camus
@ 2015-12-01 13:02 ` Noam Camus
-1 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc; +Cc: linux-kernel, cmetcalf, Noam Camus
From: Noam Camus <noamc@ezchip.com>
We add IPI irq definition to be used later by any
irqchip such NPS400 IC.
Signed-off-by: Noam Camus <noamc@ezchip.com>
---
arch/arc/include/asm/irq.h | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h
index 4fd7d62..c5f8f0f 100644
--- a/arch/arc/include/asm/irq.h
+++ b/arch/arc/include/asm/irq.h
@@ -16,7 +16,11 @@
#ifdef CONFIG_ISA_ARCOMPACT
#define TIMER0_IRQ 3
#define TIMER1_IRQ 4
+#if defined(CONFIG_SMP) && defined(CONFIG_ARC_PLAT_EZNPS)
+#define IPI_IRQ 5
+#else
#define IPI_IRQ (NR_CPU_IRQS-1) /* dummy to enable SMP build for up hardware */
+#endif
#else
#define TIMER0_IRQ 16
#define TIMER1_IRQ 17
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 02/18] ARC: [plat-eznps] define IPI_IRQ
@ 2015-12-01 13:02 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc
From: Noam Camus <noamc@ezchip.com>
We add IPI irq definition to be used later by any
irqchip such NPS400 IC.
Signed-off-by: Noam Camus <noamc at ezchip.com>
---
arch/arc/include/asm/irq.h | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h
index 4fd7d62..c5f8f0f 100644
--- a/arch/arc/include/asm/irq.h
+++ b/arch/arc/include/asm/irq.h
@@ -16,7 +16,11 @@
#ifdef CONFIG_ISA_ARCOMPACT
#define TIMER0_IRQ 3
#define TIMER1_IRQ 4
+#if defined(CONFIG_SMP) && defined(CONFIG_ARC_PLAT_EZNPS)
+#define IPI_IRQ 5
+#else
#define IPI_IRQ (NR_CPU_IRQS-1) /* dummy to enable SMP build for up hardware */
+#endif
#else
#define TIMER0_IRQ 16
#define TIMER1_IRQ 17
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 03/18] clocksource: Add NPS400 timers driver
2015-12-01 13:02 ` Noam Camus
@ 2015-12-01 13:02 ` Noam Camus
-1 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc
Cc: linux-kernel, cmetcalf, Noam Camus, Daniel Lezcano, Rob Herring,
Thomas Gleixner, John Stultz
From: Noam Camus <noamc@ezchip.com>
Add internal tick generator which is shared by all cores.
Each cluster of cores view it through dedicated address.
This is used for SMP system where all CPUs synced by same
clock source.
Signed-off-by: Noam Camus <noamc@ezchip.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
---
.../bindings/timer/ezchip,nps400-timer.txt | 11 ++++
drivers/clocksource/Kconfig | 7 ++
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-nps.c | 63 ++++++++++++++++++++
4 files changed, 82 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt
create mode 100644 drivers/clocksource/timer-nps.c
diff --git a/Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt b/Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt
new file mode 100644
index 0000000..c5102c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt
@@ -0,0 +1,11 @@
+NPS Network Processor
+
+Required properties:
+
+- compatible : should be "ezchip,nps400-timer"
+
+Example:
+
+timer {
+ compatible = "ezchip,nps400-timer";
+};
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 71cfdf7..98b12c5 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -131,6 +131,13 @@ config CLKSRC_TI_32K
This option enables support for Texas Instruments 32.768 Hz clocksource
available on many OMAP-like platforms.
+config CLKSRC_NPS
+ bool "NPS400 clocksource driver" if COMPILE_TEST
+ select CLKSRC_OF if OF
+ help
+ NPS400 clocksource support.
+ Got 64 bit counter with update rate up to 1000MHz.
+
config CLKSRC_STM32
bool "Clocksource for STM32 SoCs" if !ARCH_STM32
depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST)
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 56bd16e..20969b0 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o
obj-$(CONFIG_MTK_TIMER) += mtk_timer.o
obj-$(CONFIG_CLKSRC_PISTACHIO) += time-pistachio.o
obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o
+obj-$(CONFIG_ARC_PLAT_EZNPS) += timer-nps.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
diff --git a/drivers/clocksource/timer-nps.c b/drivers/clocksource/timer-nps.c
new file mode 100644
index 0000000..ef8f287
--- /dev/null
+++ b/drivers/clocksource/timer-nps.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#include <linux/clocksource.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <plat/ctop.h>
+
+#define NPS_MSU_TICK_LOW 0xC8
+#define NPS_CLUSTER_OFFSET 8
+#define NPS_CLUSTER_NUM 16
+
+static void *nps_msu_reg_low_addr[NPS_CLUSTER_NUM] __read_mostly;
+
+static cycle_t nps_clksrc_read(struct clocksource *clksrc)
+{
+ int cluster = raw_smp_processor_id() >> NPS_CLUSTER_OFFSET;
+
+ return (cycle_t)ioread32be(nps_msu_reg_low_addr[cluster]);
+}
+
+static struct clocksource nps_counter = {
+ .name = "EZnps-tick",
+ .rating = 301,
+ .read = nps_clksrc_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init nps_setup_clocksource(struct device_node *node)
+{
+ struct clocksource *clksrc = &nps_counter;
+ unsigned long rate, dt_root;
+ int ret, cluster;
+
+ for (cluster = 0; cluster < NPS_CLUSTER_NUM; cluster++)
+ nps_msu_reg_low_addr[cluster] =
+ nps_host_reg((cluster << NPS_CLUSTER_OFFSET),
+ NPS_MSU_BLKID, NPS_MSU_TICK_LOW);
+
+ dt_root = of_get_flat_dt_root();
+ rate = (u32)of_get_flat_dt_prop(dt_root, "clock-frequency", NULL);
+
+ ret = clocksource_register_hz(clksrc, rate);
+ if (ret)
+ pr_err("Couldn't register clock source.\n");
+}
+
+CLOCKSOURCE_OF_DECLARE(nps_400, "ezchip,nps400-timer",
+ nps_setup_clocksource);
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 03/18] clocksource: Add NPS400 timers driver
@ 2015-12-01 13:02 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc
From: Noam Camus <noamc@ezchip.com>
Add internal tick generator which is shared by all cores.
Each cluster of cores view it through dedicated address.
This is used for SMP system where all CPUs synced by same
clock source.
Signed-off-by: Noam Camus <noamc at ezchip.com>
Cc: Daniel Lezcano <daniel.lezcano at linaro.org>
Cc: Rob Herring <robh+dt at kernel.org>
Cc: Thomas Gleixner <tglx at linutronix.de>
Cc: John Stultz <john.stultz at linaro.org>
Acked-by: Vineet Gupta <vgupta at synopsys.com>
---
.../bindings/timer/ezchip,nps400-timer.txt | 11 ++++
drivers/clocksource/Kconfig | 7 ++
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-nps.c | 63 ++++++++++++++++++++
4 files changed, 82 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt
create mode 100644 drivers/clocksource/timer-nps.c
diff --git a/Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt b/Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt
new file mode 100644
index 0000000..c5102c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt
@@ -0,0 +1,11 @@
+NPS Network Processor
+
+Required properties:
+
+- compatible : should be "ezchip,nps400-timer"
+
+Example:
+
+timer {
+ compatible = "ezchip,nps400-timer";
+};
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 71cfdf7..98b12c5 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -131,6 +131,13 @@ config CLKSRC_TI_32K
This option enables support for Texas Instruments 32.768 Hz clocksource
available on many OMAP-like platforms.
+config CLKSRC_NPS
+ bool "NPS400 clocksource driver" if COMPILE_TEST
+ select CLKSRC_OF if OF
+ help
+ NPS400 clocksource support.
+ Got 64 bit counter with update rate up to 1000MHz.
+
config CLKSRC_STM32
bool "Clocksource for STM32 SoCs" if !ARCH_STM32
depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST)
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 56bd16e..20969b0 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o
obj-$(CONFIG_MTK_TIMER) += mtk_timer.o
obj-$(CONFIG_CLKSRC_PISTACHIO) += time-pistachio.o
obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o
+obj-$(CONFIG_ARC_PLAT_EZNPS) += timer-nps.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
diff --git a/drivers/clocksource/timer-nps.c b/drivers/clocksource/timer-nps.c
new file mode 100644
index 0000000..ef8f287
--- /dev/null
+++ b/drivers/clocksource/timer-nps.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#include <linux/clocksource.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <plat/ctop.h>
+
+#define NPS_MSU_TICK_LOW 0xC8
+#define NPS_CLUSTER_OFFSET 8
+#define NPS_CLUSTER_NUM 16
+
+static void *nps_msu_reg_low_addr[NPS_CLUSTER_NUM] __read_mostly;
+
+static cycle_t nps_clksrc_read(struct clocksource *clksrc)
+{
+ int cluster = raw_smp_processor_id() >> NPS_CLUSTER_OFFSET;
+
+ return (cycle_t)ioread32be(nps_msu_reg_low_addr[cluster]);
+}
+
+static struct clocksource nps_counter = {
+ .name = "EZnps-tick",
+ .rating = 301,
+ .read = nps_clksrc_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init nps_setup_clocksource(struct device_node *node)
+{
+ struct clocksource *clksrc = &nps_counter;
+ unsigned long rate, dt_root;
+ int ret, cluster;
+
+ for (cluster = 0; cluster < NPS_CLUSTER_NUM; cluster++)
+ nps_msu_reg_low_addr[cluster] =
+ nps_host_reg((cluster << NPS_CLUSTER_OFFSET),
+ NPS_MSU_BLKID, NPS_MSU_TICK_LOW);
+
+ dt_root = of_get_flat_dt_root();
+ rate = (u32)of_get_flat_dt_prop(dt_root, "clock-frequency", NULL);
+
+ ret = clocksource_register_hz(clksrc, rate);
+ if (ret)
+ pr_err("Couldn't register clock source.\n");
+}
+
+CLOCKSOURCE_OF_DECLARE(nps_400, "ezchip,nps400-timer",
+ nps_setup_clocksource);
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 04/18] irqchip: add nps Internal and external irqchips
2015-12-01 13:02 ` Noam Camus
@ 2015-12-01 13:02 ` Noam Camus
-1 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc
Cc: linux-kernel, cmetcalf, Noam Camus, Thomas Gleixner,
Jason Cooper, Marc Zyngier
From: Noam Camus <noamc@ezchip.com>
Adding EZchip NPS400 support.
NPS internal interrupts are internally handled at
Multi Thread Manager (MTM) that is signaled for deactivating
an interrupt.
External interrupts is handled also at Global Interrupt
Controller (GIC) e.g. serial and network devices.
Signed-off-by: Noam Camus <noamc@ezchip.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
---
.../interrupt-controller/ezchip,nps400-ic.txt | 17 ++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-eznps.c | 213 ++++++++++++++++++++
3 files changed, 231 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt
create mode 100644 drivers/irqchip/irq-eznps.c
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt
new file mode 100644
index 0000000..888b2b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt
@@ -0,0 +1,17 @@
+EZchip NPS Interrupt Controller
+
+Required properties:
+
+- compatible : should be "ezchip,nps400-ic"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+
+
+Example:
+
+intc: interrupt-controller {
+ compatible = "ezchip,nps400-ic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+};
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 177f78f..b95b954 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -55,3 +55,4 @@ obj-$(CONFIG_RENESAS_H8S_INTC) += irq-renesas-h8s.o
obj-$(CONFIG_ARCH_SA1100) += irq-sa11x0.o
obj-$(CONFIG_INGENIC_IRQ) += irq-ingenic.o
obj-$(CONFIG_IMX_GPCV2) += irq-imx-gpcv2.o
+obj-$(CONFIG_ARC_PLAT_EZNPS) += irq-eznps.o
diff --git a/drivers/irqchip/irq-eznps.c b/drivers/irqchip/irq-eznps.c
new file mode 100644
index 0000000..bb8d547
--- /dev/null
+++ b/drivers/irqchip/irq-eznps.c
@@ -0,0 +1,213 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip.h>
+#include <asm/irq.h>
+#include <plat/mtm.h>
+
+#define NPS_MSU_EN_CFG 0x80 /* MSU Enable Configuration Register */
+#define MSU_EN BIT(0) /* MSU block enable */
+#define IPI_EN BIT(16) /* Enable service of incoming IPI Messages */
+#define GIM0_EN BIT(17) /* Enable service of incoming GIM 0 messages */
+#define GIM1_EN BIT(18) /* Enable service of incoming GIM 1 messages */
+
+#define NPS_GIM_P_POL 0x110 /* Peripheral interrupts source polarity */
+#define NPS_GIM_P_SENS 0x114 /* Peripheral interrupts sensitivity */
+#define GIM_UART BIT(7)
+#define GIM_LAN_TX (BIT(10) | BIT(25))
+#define GIM_LAN_RX (BIT(11) | BIT(26))
+#define GIM_PERIPH_ALL (GIM_UART | GIM_LAN_TX | GIM_LAN_RX)
+
+#define NPS_GIM_P_DST10 0x13A /* Peripheral Interrupt Destination (LAN RX) */
+#define NPS_GIM_P_DST11 0x13B /* Peripheral Interrupt Destination (LAN TX) */
+#define NPS_GIM_P_DST25 0x149 /* Peripheral Interrupt Destination (LAN RX) */
+#define NPS_GIM_P_DST26 0x14A /* Peripheral Interrupt Destination (LAN TX) */
+#define DST_IS BIT(26) /* Interrupt select for line 7 */
+
+#define NPS_GIM_P_EN 0x100 /* Peripheral interrupts source enable */
+#define NPS_GIM_P_BLK 0x118 /* Peripheral interrupts blocking for sources */
+
+/* Messaging and Scheduling Unit:
+ * Provides message management for a CPU cluster.
+ */
+static void __init eznps_configure_msu(void)
+{
+ int cpu;
+ u32 value = MSU_EN | IPI_EN | GIM0_EN | GIM1_EN;
+
+ /* Enable IPI and GIM messages on all clusters */
+ for (cpu = 0 ; cpu < eznps_max_cpus; cpu += eznps_cpus_per_cluster)
+ iowrite32be(value,
+ nps_host_reg(cpu, NPS_MSU_BLKID, NPS_MSU_EN_CFG));
+}
+
+/* Global Interrupt Manager:
+ * Configures and manages up to 64 interrupts from peripherals,
+ * 16 interrupts from CPUs (virtual interrupts) and ECC interrupts.
+ * Receives the interrupts and transmits them to relevant CPU.
+ */
+static void __init eznps_configure_gim(void)
+{
+ u32 reg_addr, reg_val;
+
+ /* IRQ polarity, low or high level, negative or positive edge */
+ reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_POL);
+ reg_val = ioread32be(reg_addr);
+ reg_val &= ~GIM_PERIPH_ALL;
+ iowrite32be(reg_val, reg_addr);
+
+ /* IRQ type level or edge */
+ reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_SENS);
+ reg_val = ioread32be(reg_addr);
+ reg_val |= GIM_LAN_TX;
+ iowrite32be(reg_val, reg_addr);
+
+ /* GIM interrupt select type for debug LAN interrupts (both sides) */
+ reg_val = DST_IS;
+ reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_DST10);
+ iowrite32be(reg_val, reg_addr);
+ reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_DST11);
+ iowrite32be(reg_val, reg_addr);
+ reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_DST25);
+ iowrite32be(reg_val, reg_addr);
+ reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_DST26);
+ iowrite32be(reg_val, reg_addr);
+
+ /* CTOP IRQ lines should be defined as blocking in GIM */
+ iowrite32be(GIM_PERIPH_ALL,
+ nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_BLK));
+
+ /* Enable CTOP IRQ lines in GIM */
+ iowrite32be(GIM_PERIPH_ALL,
+ nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_EN));
+}
+
+/*
+ * NPS400 core includes a Interrupt Controller (IC) support.
+ * All cores can deactivate level irqs at first level control
+ * at cores mesh layer called MTM.
+ * For devices out side chip e.g. uart, network there is another
+ * level called Global Interrupt Manager (GIM).
+ * This second level can control level and edge interrupt.
+ *
+ * NOTE: AUX_IENABLE and CTOP_AUX_IACK are auxiliary registers
+ * with private HW copy per CPU.
+ */
+
+static void nps400_irq_mask(struct irq_data *data)
+{
+ unsigned int ienb;
+
+ ienb = read_aux_reg(AUX_IENABLE);
+ ienb &= ~(1 << data->hwirq);
+ write_aux_reg(AUX_IENABLE, ienb);
+}
+
+static void nps400_irq_unmask(struct irq_data *data)
+{
+ unsigned int ienb;
+
+ ienb = read_aux_reg(AUX_IENABLE);
+ ienb |= (1 << data->hwirq);
+ write_aux_reg(AUX_IENABLE, ienb);
+}
+
+static void nps400_irq_eoi_global(struct irq_data *data)
+{
+ write_aux_reg(CTOP_AUX_IACK, 1 << data->hwirq);
+
+ /* Don't ack before all device access is done */
+ mb();
+
+ __asm__ __volatile__ (
+ " .word %0\n"
+ :
+ : "i"(CTOP_INST_RSPI_GIC_0_R12)
+ : "memory");
+}
+
+static void nps400_irq_eoi(struct irq_data *data)
+{
+ write_aux_reg(CTOP_AUX_IACK, 1 << data->hwirq);
+}
+
+
+static struct irq_chip nps400_irq_chip_fasteoi = {
+ .name = "NPS400 IC Global",
+ .irq_mask = nps400_irq_mask,
+ .irq_unmask = nps400_irq_unmask,
+ .irq_eoi = nps400_irq_eoi_global,
+};
+
+static struct irq_chip nps400_irq_chip_percpu = {
+ .name = "NPS400 IC",
+ .irq_mask = nps400_irq_mask,
+ .irq_unmask = nps400_irq_unmask,
+ .irq_eoi = nps400_irq_eoi,
+};
+
+static int nps400_irq_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hw)
+{
+ switch (irq) {
+ case TIMER0_IRQ:
+#if defined(CONFIG_SMP)
+ case IPI_IRQ:
+#endif
+ irq_set_chip_and_handler(irq, &nps400_irq_chip_percpu,
+ handle_percpu_irq);
+ break;
+ default:
+ irq_set_chip_and_handler(irq, &nps400_irq_chip_fasteoi,
+ handle_fasteoi_irq);
+ break;
+ }
+
+ return 0;
+}
+
+static const struct irq_domain_ops nps400_irq_ops = {
+ .xlate = irq_domain_xlate_onecell,
+ .map = nps400_irq_map,
+};
+
+static struct irq_domain *nps400_root_domain;
+
+static int __init nps400_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ if (parent)
+ panic("DeviceTree incore ic not a root irq controller\n");
+
+ eznps_configure_msu();
+ eznps_configure_gim();
+
+ nps400_root_domain = irq_domain_add_legacy(node, NR_CPU_IRQS, 0, 0,
+ &nps400_irq_ops, NULL);
+
+ if (!nps400_root_domain)
+ panic("nps400 root irq domain not avail\n");
+
+ /* with this we don't need to export nps400_root_domain */
+ irq_set_default_host(nps400_root_domain);
+
+ return 0;
+}
+IRQCHIP_DECLARE(ezchip_nps400_ic, "ezchip,nps400-ic", nps400_of_init);
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 04/18] irqchip: add nps Internal and external irqchips
@ 2015-12-01 13:02 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc
From: Noam Camus <noamc@ezchip.com>
Adding EZchip NPS400 support.
NPS internal interrupts are internally handled at
Multi Thread Manager (MTM) that is signaled for deactivating
an interrupt.
External interrupts is handled also at Global Interrupt
Controller (GIC) e.g. serial and network devices.
Signed-off-by: Noam Camus <noamc at ezchip.com>
Cc: Thomas Gleixner <tglx at linutronix.de>
Cc: Jason Cooper <jason at lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier at arm.com>
---
.../interrupt-controller/ezchip,nps400-ic.txt | 17 ++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-eznps.c | 213 ++++++++++++++++++++
3 files changed, 231 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt
create mode 100644 drivers/irqchip/irq-eznps.c
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt
new file mode 100644
index 0000000..888b2b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt
@@ -0,0 +1,17 @@
+EZchip NPS Interrupt Controller
+
+Required properties:
+
+- compatible : should be "ezchip,nps400-ic"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+
+
+Example:
+
+intc: interrupt-controller {
+ compatible = "ezchip,nps400-ic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+};
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 177f78f..b95b954 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -55,3 +55,4 @@ obj-$(CONFIG_RENESAS_H8S_INTC) += irq-renesas-h8s.o
obj-$(CONFIG_ARCH_SA1100) += irq-sa11x0.o
obj-$(CONFIG_INGENIC_IRQ) += irq-ingenic.o
obj-$(CONFIG_IMX_GPCV2) += irq-imx-gpcv2.o
+obj-$(CONFIG_ARC_PLAT_EZNPS) += irq-eznps.o
diff --git a/drivers/irqchip/irq-eznps.c b/drivers/irqchip/irq-eznps.c
new file mode 100644
index 0000000..bb8d547
--- /dev/null
+++ b/drivers/irqchip/irq-eznps.c
@@ -0,0 +1,213 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip.h>
+#include <asm/irq.h>
+#include <plat/mtm.h>
+
+#define NPS_MSU_EN_CFG 0x80 /* MSU Enable Configuration Register */
+#define MSU_EN BIT(0) /* MSU block enable */
+#define IPI_EN BIT(16) /* Enable service of incoming IPI Messages */
+#define GIM0_EN BIT(17) /* Enable service of incoming GIM 0 messages */
+#define GIM1_EN BIT(18) /* Enable service of incoming GIM 1 messages */
+
+#define NPS_GIM_P_POL 0x110 /* Peripheral interrupts source polarity */
+#define NPS_GIM_P_SENS 0x114 /* Peripheral interrupts sensitivity */
+#define GIM_UART BIT(7)
+#define GIM_LAN_TX (BIT(10) | BIT(25))
+#define GIM_LAN_RX (BIT(11) | BIT(26))
+#define GIM_PERIPH_ALL (GIM_UART | GIM_LAN_TX | GIM_LAN_RX)
+
+#define NPS_GIM_P_DST10 0x13A /* Peripheral Interrupt Destination (LAN RX) */
+#define NPS_GIM_P_DST11 0x13B /* Peripheral Interrupt Destination (LAN TX) */
+#define NPS_GIM_P_DST25 0x149 /* Peripheral Interrupt Destination (LAN RX) */
+#define NPS_GIM_P_DST26 0x14A /* Peripheral Interrupt Destination (LAN TX) */
+#define DST_IS BIT(26) /* Interrupt select for line 7 */
+
+#define NPS_GIM_P_EN 0x100 /* Peripheral interrupts source enable */
+#define NPS_GIM_P_BLK 0x118 /* Peripheral interrupts blocking for sources */
+
+/* Messaging and Scheduling Unit:
+ * Provides message management for a CPU cluster.
+ */
+static void __init eznps_configure_msu(void)
+{
+ int cpu;
+ u32 value = MSU_EN | IPI_EN | GIM0_EN | GIM1_EN;
+
+ /* Enable IPI and GIM messages on all clusters */
+ for (cpu = 0 ; cpu < eznps_max_cpus; cpu += eznps_cpus_per_cluster)
+ iowrite32be(value,
+ nps_host_reg(cpu, NPS_MSU_BLKID, NPS_MSU_EN_CFG));
+}
+
+/* Global Interrupt Manager:
+ * Configures and manages up to 64 interrupts from peripherals,
+ * 16 interrupts from CPUs (virtual interrupts) and ECC interrupts.
+ * Receives the interrupts and transmits them to relevant CPU.
+ */
+static void __init eznps_configure_gim(void)
+{
+ u32 reg_addr, reg_val;
+
+ /* IRQ polarity, low or high level, negative or positive edge */
+ reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_POL);
+ reg_val = ioread32be(reg_addr);
+ reg_val &= ~GIM_PERIPH_ALL;
+ iowrite32be(reg_val, reg_addr);
+
+ /* IRQ type level or edge */
+ reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_SENS);
+ reg_val = ioread32be(reg_addr);
+ reg_val |= GIM_LAN_TX;
+ iowrite32be(reg_val, reg_addr);
+
+ /* GIM interrupt select type for debug LAN interrupts (both sides) */
+ reg_val = DST_IS;
+ reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_DST10);
+ iowrite32be(reg_val, reg_addr);
+ reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_DST11);
+ iowrite32be(reg_val, reg_addr);
+ reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_DST25);
+ iowrite32be(reg_val, reg_addr);
+ reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_DST26);
+ iowrite32be(reg_val, reg_addr);
+
+ /* CTOP IRQ lines should be defined as blocking in GIM */
+ iowrite32be(GIM_PERIPH_ALL,
+ nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_BLK));
+
+ /* Enable CTOP IRQ lines in GIM */
+ iowrite32be(GIM_PERIPH_ALL,
+ nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_EN));
+}
+
+/*
+ * NPS400 core includes a Interrupt Controller (IC) support.
+ * All cores can deactivate level irqs at first level control
+ * at cores mesh layer called MTM.
+ * For devices out side chip e.g. uart, network there is another
+ * level called Global Interrupt Manager (GIM).
+ * This second level can control level and edge interrupt.
+ *
+ * NOTE: AUX_IENABLE and CTOP_AUX_IACK are auxiliary registers
+ * with private HW copy per CPU.
+ */
+
+static void nps400_irq_mask(struct irq_data *data)
+{
+ unsigned int ienb;
+
+ ienb = read_aux_reg(AUX_IENABLE);
+ ienb &= ~(1 << data->hwirq);
+ write_aux_reg(AUX_IENABLE, ienb);
+}
+
+static void nps400_irq_unmask(struct irq_data *data)
+{
+ unsigned int ienb;
+
+ ienb = read_aux_reg(AUX_IENABLE);
+ ienb |= (1 << data->hwirq);
+ write_aux_reg(AUX_IENABLE, ienb);
+}
+
+static void nps400_irq_eoi_global(struct irq_data *data)
+{
+ write_aux_reg(CTOP_AUX_IACK, 1 << data->hwirq);
+
+ /* Don't ack before all device access is done */
+ mb();
+
+ __asm__ __volatile__ (
+ " .word %0\n"
+ :
+ : "i"(CTOP_INST_RSPI_GIC_0_R12)
+ : "memory");
+}
+
+static void nps400_irq_eoi(struct irq_data *data)
+{
+ write_aux_reg(CTOP_AUX_IACK, 1 << data->hwirq);
+}
+
+
+static struct irq_chip nps400_irq_chip_fasteoi = {
+ .name = "NPS400 IC Global",
+ .irq_mask = nps400_irq_mask,
+ .irq_unmask = nps400_irq_unmask,
+ .irq_eoi = nps400_irq_eoi_global,
+};
+
+static struct irq_chip nps400_irq_chip_percpu = {
+ .name = "NPS400 IC",
+ .irq_mask = nps400_irq_mask,
+ .irq_unmask = nps400_irq_unmask,
+ .irq_eoi = nps400_irq_eoi,
+};
+
+static int nps400_irq_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hw)
+{
+ switch (irq) {
+ case TIMER0_IRQ:
+#if defined(CONFIG_SMP)
+ case IPI_IRQ:
+#endif
+ irq_set_chip_and_handler(irq, &nps400_irq_chip_percpu,
+ handle_percpu_irq);
+ break;
+ default:
+ irq_set_chip_and_handler(irq, &nps400_irq_chip_fasteoi,
+ handle_fasteoi_irq);
+ break;
+ }
+
+ return 0;
+}
+
+static const struct irq_domain_ops nps400_irq_ops = {
+ .xlate = irq_domain_xlate_onecell,
+ .map = nps400_irq_map,
+};
+
+static struct irq_domain *nps400_root_domain;
+
+static int __init nps400_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ if (parent)
+ panic("DeviceTree incore ic not a root irq controller\n");
+
+ eznps_configure_msu();
+ eznps_configure_gim();
+
+ nps400_root_domain = irq_domain_add_legacy(node, NR_CPU_IRQS, 0, 0,
+ &nps400_irq_ops, NULL);
+
+ if (!nps400_root_domain)
+ panic("nps400 root irq domain not avail\n");
+
+ /* with this we don't need to export nps400_root_domain */
+ irq_set_default_host(nps400_root_domain);
+
+ return 0;
+}
+IRQCHIP_DECLARE(ezchip_nps400_ic, "ezchip,nps400-ic", nps400_of_init);
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 05/18] ARC: Set vmalloc size from configuration
2015-12-01 13:02 ` Noam Camus
@ 2015-12-01 13:02 ` Noam Camus
-1 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc; +Cc: linux-kernel, cmetcalf, Noam Camus
From: Noam Camus <noamc@ezchip.com>
User space use lower 2G of the virtual address space.
However kernel steals upper 512M of this space.
This stolen space is used partially for vmalloc and the rest
serves as gutter between kernel and user space.
The vmalloc size is depend on NR_CPUS since "per cpu" mechanism
use vmalloc to allocate chunks for its use.
Historically vmalloc size was 256M however it is not enough in
case of many CPUs e.g. 4K CPUs. For such case an extra 192M is
allocated.
We are setting default vmalloc size to be 256M, any addtional
space will be taken from kernel/user gutter.
This introduce build error since PGDIR_SIZE() cannot use "1UL"
ibecause it is called from mm/tlbex.S by VMALLOC_START.
Using _BITUL() solves this build error.
Signed-off-by: Noam Camus <noamc@ezchip.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
---
arch/arc/Kconfig | 8 ++++++++
arch/arc/include/asm/pgtable.h | 2 +-
arch/arc/include/asm/processor.h | 10 +++++-----
arch/arc/mm/tlb.c | 6 ++++++
4 files changed, 20 insertions(+), 6 deletions(-)
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 2c2ac3f..689ccb3 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -468,6 +468,14 @@ config ARCH_PHYS_ADDR_T_64BIT
config ARCH_DMA_ADDR_T_64BIT
bool
+config ARC_VMALLOC_SIZE
+ hex "Vmalloc size (MB)"
+ range 0 512
+ default "256"
+ help
+ By default equals to 256MB and the rest of 512MB is
+ left for gutter between kernel and user space.
+
config ARC_CURR_IN_REG
bool "Dedicate Register r25 for current_task pointer"
default y
diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h
index 57af2f0..372a282 100644
--- a/arch/arc/include/asm/pgtable.h
+++ b/arch/arc/include/asm/pgtable.h
@@ -210,7 +210,7 @@
#define BITS_FOR_PGD (32 - BITS_FOR_PTE - BITS_IN_PAGE)
#define PGDIR_SHIFT (32 - BITS_FOR_PGD)
-#define PGDIR_SIZE (1UL << PGDIR_SHIFT) /* vaddr span, not PDG sz */
+#define PGDIR_SIZE _BITUL(PGDIR_SHIFT) /* vaddr span, not PDG sz */
#define PGDIR_MASK (~(PGDIR_SIZE-1))
#define PTRS_PER_PTE _BITUL(BITS_FOR_PTE)
diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h
index 1d694c1..8a77ccd 100644
--- a/arch/arc/include/asm/processor.h
+++ b/arch/arc/include/asm/processor.h
@@ -109,18 +109,18 @@ extern unsigned int get_wchan(struct task_struct *p);
* 0xC000_0000 0xFFFF_FFFF (peripheral uncached space)
* -----------------------------------------------------------------------------
*/
-#define VMALLOC_START 0x70000000
/*
* 1 PGDIR_SIZE each for fixmap/pkmap, 2 PGDIR_SIZE gutter
* See asm/highmem.h for details
*/
-#define VMALLOC_SIZE (PAGE_OFFSET - VMALLOC_START - PGDIR_SIZE * 4)
-#define VMALLOC_END (VMALLOC_START + VMALLOC_SIZE)
+#define VMALLOC_END (PAGE_OFFSET - PGDIR_SIZE * 4)
+#define VMALLOC_SIZE (CONFIG_ARC_VMALLOC_SIZE << 20)
+#define VMALLOC_START (VMALLOC_END - VMALLOC_SIZE)
-#define USER_KERNEL_GUTTER 0x10000000
+#define TASK_SIZE 0x60000000
-#define TASK_SIZE (VMALLOC_START - USER_KERNEL_GUTTER)
+#define USER_KERNEL_GUTTER (VMALLOC_START - TASK_SIZE)
#define STACK_TOP TASK_SIZE
#define STACK_TOP_MAX STACK_TOP
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index daf2bf5..843e1a5 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -814,6 +814,12 @@ void arc_mmu_init(void)
printk(arc_mmu_mumbojumbo(0, str, sizeof(str)));
+ /*
+ * vmalloc size (in MB) sanity check,
+ * Can't be done in processor.h due to header include depenedencies
+ */
+ BUILD_BUG_ON(!IS_ALIGNED((CONFIG_ARC_VMALLOC_SIZE << 20), PMD_SIZE));
+
/* For efficiency sake, kernel is compile time built for a MMU ver
* This must match the hardware it is running on.
* Linux built for MMU V2, if run on MMU V1 will break down because V1
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 05/18] ARC: Set vmalloc size from configuration
@ 2015-12-01 13:02 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc
From: Noam Camus <noamc@ezchip.com>
User space use lower 2G of the virtual address space.
However kernel steals upper 512M of this space.
This stolen space is used partially for vmalloc and the rest
serves as gutter between kernel and user space.
The vmalloc size is depend on NR_CPUS since "per cpu" mechanism
use vmalloc to allocate chunks for its use.
Historically vmalloc size was 256M however it is not enough in
case of many CPUs e.g. 4K CPUs. For such case an extra 192M is
allocated.
We are setting default vmalloc size to be 256M, any addtional
space will be taken from kernel/user gutter.
This introduce build error since PGDIR_SIZE() cannot use "1UL"
ibecause it is called from mm/tlbex.S by VMALLOC_START.
Using _BITUL() solves this build error.
Signed-off-by: Noam Camus <noamc at ezchip.com>
Acked-by: Vineet Gupta <vgupta at synopsys.com>
---
arch/arc/Kconfig | 8 ++++++++
arch/arc/include/asm/pgtable.h | 2 +-
arch/arc/include/asm/processor.h | 10 +++++-----
arch/arc/mm/tlb.c | 6 ++++++
4 files changed, 20 insertions(+), 6 deletions(-)
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 2c2ac3f..689ccb3 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -468,6 +468,14 @@ config ARCH_PHYS_ADDR_T_64BIT
config ARCH_DMA_ADDR_T_64BIT
bool
+config ARC_VMALLOC_SIZE
+ hex "Vmalloc size (MB)"
+ range 0 512
+ default "256"
+ help
+ By default equals to 256MB and the rest of 512MB is
+ left for gutter between kernel and user space.
+
config ARC_CURR_IN_REG
bool "Dedicate Register r25 for current_task pointer"
default y
diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h
index 57af2f0..372a282 100644
--- a/arch/arc/include/asm/pgtable.h
+++ b/arch/arc/include/asm/pgtable.h
@@ -210,7 +210,7 @@
#define BITS_FOR_PGD (32 - BITS_FOR_PTE - BITS_IN_PAGE)
#define PGDIR_SHIFT (32 - BITS_FOR_PGD)
-#define PGDIR_SIZE (1UL << PGDIR_SHIFT) /* vaddr span, not PDG sz */
+#define PGDIR_SIZE _BITUL(PGDIR_SHIFT) /* vaddr span, not PDG sz */
#define PGDIR_MASK (~(PGDIR_SIZE-1))
#define PTRS_PER_PTE _BITUL(BITS_FOR_PTE)
diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h
index 1d694c1..8a77ccd 100644
--- a/arch/arc/include/asm/processor.h
+++ b/arch/arc/include/asm/processor.h
@@ -109,18 +109,18 @@ extern unsigned int get_wchan(struct task_struct *p);
* 0xC000_0000 0xFFFF_FFFF (peripheral uncached space)
* -----------------------------------------------------------------------------
*/
-#define VMALLOC_START 0x70000000
/*
* 1 PGDIR_SIZE each for fixmap/pkmap, 2 PGDIR_SIZE gutter
* See asm/highmem.h for details
*/
-#define VMALLOC_SIZE (PAGE_OFFSET - VMALLOC_START - PGDIR_SIZE * 4)
-#define VMALLOC_END (VMALLOC_START + VMALLOC_SIZE)
+#define VMALLOC_END (PAGE_OFFSET - PGDIR_SIZE * 4)
+#define VMALLOC_SIZE (CONFIG_ARC_VMALLOC_SIZE << 20)
+#define VMALLOC_START (VMALLOC_END - VMALLOC_SIZE)
-#define USER_KERNEL_GUTTER 0x10000000
+#define TASK_SIZE 0x60000000
-#define TASK_SIZE (VMALLOC_START - USER_KERNEL_GUTTER)
+#define USER_KERNEL_GUTTER (VMALLOC_START - TASK_SIZE)
#define STACK_TOP TASK_SIZE
#define STACK_TOP_MAX STACK_TOP
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index daf2bf5..843e1a5 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -814,6 +814,12 @@ void arc_mmu_init(void)
printk(arc_mmu_mumbojumbo(0, str, sizeof(str)));
+ /*
+ * vmalloc size (in MB) sanity check,
+ * Can't be done in processor.h due to header include depenedencies
+ */
+ BUILD_BUG_ON(!IS_ALIGNED((CONFIG_ARC_VMALLOC_SIZE << 20), PMD_SIZE));
+
/* For efficiency sake, kernel is compile time built for a MMU ver
* This must match the hardware it is running on.
* Linux built for MMU V2, if run on MMU V1 will break down because V1
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 06/18] ARC: rwlock: disable interrupts in !LLSC variant
2015-12-01 13:02 ` Noam Camus
@ 2015-12-01 13:02 ` Noam Camus
-1 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc; +Cc: linux-kernel, cmetcalf, Noam Camus
From: Noam Camus <noamc@ezchip.com>
If we hold rwlock and interrupt occures we may
end up spinning on it for ever during softirq.
Note that this lock is an internal lock
and since the lock is free to be used from any context,
the lock needs to be IRQ-safe.
Below you may see an example for interrupt we get while
nl_table_lock is holding its rw->lock_mutex and we spinned
on it for ever.
The concept for the fix was taken from SPARC.
[2015-05-12 19:16:12] Stack Trace:
[2015-05-12 19:16:12] arc_unwind_core+0xb8/0x11c
[2015-05-12 19:16:12] dump_stack+0x68/0xac
[2015-05-12 19:16:12] _raw_read_lock+0xa8/0xac
[2015-05-12 19:16:12] netlink_broadcast_filtered+0x56/0x35c
[2015-05-12 19:16:12] nlmsg_notify+0x42/0xa4
[2015-05-12 19:16:13] neigh_update+0x1fe/0x44c
[2015-05-12 19:16:13] neigh_event_ns+0x40/0xa4
[2015-05-12 19:16:13] arp_process+0x46e/0x5a8
[2015-05-12 19:16:13] __netif_receive_skb_core+0x358/0x500
[2015-05-12 19:16:13] process_backlog+0x92/0x154
[2015-05-12 19:16:13] net_rx_action+0xb8/0x188
[2015-05-12 19:16:13] __do_softirq+0xda/0x1d8
[2015-05-12 19:16:14] irq_exit+0x8a/0x8c
[2015-05-12 19:16:14] arch_do_IRQ+0x6c/0xa8
[2015-05-12 19:16:14] handle_interrupt_level1+0xe4/0xf0
Signed-off-by: Noam Camus <noamc@ezchip.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
---
arch/arc/include/asm/spinlock.h | 14 ++++++++++++++
1 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/arch/arc/include/asm/spinlock.h b/arch/arc/include/asm/spinlock.h
index db8c59d..800e7c4 100644
--- a/arch/arc/include/asm/spinlock.h
+++ b/arch/arc/include/asm/spinlock.h
@@ -610,7 +610,9 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
static inline int arch_read_trylock(arch_rwlock_t *rw)
{
int ret = 0;
+ unsigned long flags;
+ local_irq_save(flags);
arch_spin_lock(&(rw->lock_mutex));
/*
@@ -623,6 +625,7 @@ static inline int arch_read_trylock(arch_rwlock_t *rw)
}
arch_spin_unlock(&(rw->lock_mutex));
+ local_irq_restore(flags);
smp_mb();
return ret;
@@ -632,7 +635,9 @@ static inline int arch_read_trylock(arch_rwlock_t *rw)
static inline int arch_write_trylock(arch_rwlock_t *rw)
{
int ret = 0;
+ unsigned long flags;
+ local_irq_save(flags);
arch_spin_lock(&(rw->lock_mutex));
/*
@@ -646,6 +651,7 @@ static inline int arch_write_trylock(arch_rwlock_t *rw)
ret = 1;
}
arch_spin_unlock(&(rw->lock_mutex));
+ local_irq_restore(flags);
return ret;
}
@@ -664,16 +670,24 @@ static inline void arch_write_lock(arch_rwlock_t *rw)
static inline void arch_read_unlock(arch_rwlock_t *rw)
{
+ unsigned long flags;
+
+ local_irq_save(flags);
arch_spin_lock(&(rw->lock_mutex));
rw->counter++;
arch_spin_unlock(&(rw->lock_mutex));
+ local_irq_restore(flags);
}
static inline void arch_write_unlock(arch_rwlock_t *rw)
{
+ unsigned long flags;
+
+ local_irq_save(flags);
arch_spin_lock(&(rw->lock_mutex));
rw->counter = __ARCH_RW_LOCK_UNLOCKED__;
arch_spin_unlock(&(rw->lock_mutex));
+ local_irq_restore(flags);
}
#endif
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 06/18] ARC: rwlock: disable interrupts in !LLSC variant
@ 2015-12-01 13:02 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc
From: Noam Camus <noamc@ezchip.com>
If we hold rwlock and interrupt occures we may
end up spinning on it for ever during softirq.
Note that this lock is an internal lock
and since the lock is free to be used from any context,
the lock needs to be IRQ-safe.
Below you may see an example for interrupt we get while
nl_table_lock is holding its rw->lock_mutex and we spinned
on it for ever.
The concept for the fix was taken from SPARC.
[2015-05-12 19:16:12] Stack Trace:
[2015-05-12 19:16:12] arc_unwind_core+0xb8/0x11c
[2015-05-12 19:16:12] dump_stack+0x68/0xac
[2015-05-12 19:16:12] _raw_read_lock+0xa8/0xac
[2015-05-12 19:16:12] netlink_broadcast_filtered+0x56/0x35c
[2015-05-12 19:16:12] nlmsg_notify+0x42/0xa4
[2015-05-12 19:16:13] neigh_update+0x1fe/0x44c
[2015-05-12 19:16:13] neigh_event_ns+0x40/0xa4
[2015-05-12 19:16:13] arp_process+0x46e/0x5a8
[2015-05-12 19:16:13] __netif_receive_skb_core+0x358/0x500
[2015-05-12 19:16:13] process_backlog+0x92/0x154
[2015-05-12 19:16:13] net_rx_action+0xb8/0x188
[2015-05-12 19:16:13] __do_softirq+0xda/0x1d8
[2015-05-12 19:16:14] irq_exit+0x8a/0x8c
[2015-05-12 19:16:14] arch_do_IRQ+0x6c/0xa8
[2015-05-12 19:16:14] handle_interrupt_level1+0xe4/0xf0
Signed-off-by: Noam Camus <noamc at ezchip.com>
Acked-by: Peter Zijlstra <peterz at infradead.org>
---
arch/arc/include/asm/spinlock.h | 14 ++++++++++++++
1 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/arch/arc/include/asm/spinlock.h b/arch/arc/include/asm/spinlock.h
index db8c59d..800e7c4 100644
--- a/arch/arc/include/asm/spinlock.h
+++ b/arch/arc/include/asm/spinlock.h
@@ -610,7 +610,9 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
static inline int arch_read_trylock(arch_rwlock_t *rw)
{
int ret = 0;
+ unsigned long flags;
+ local_irq_save(flags);
arch_spin_lock(&(rw->lock_mutex));
/*
@@ -623,6 +625,7 @@ static inline int arch_read_trylock(arch_rwlock_t *rw)
}
arch_spin_unlock(&(rw->lock_mutex));
+ local_irq_restore(flags);
smp_mb();
return ret;
@@ -632,7 +635,9 @@ static inline int arch_read_trylock(arch_rwlock_t *rw)
static inline int arch_write_trylock(arch_rwlock_t *rw)
{
int ret = 0;
+ unsigned long flags;
+ local_irq_save(flags);
arch_spin_lock(&(rw->lock_mutex));
/*
@@ -646,6 +651,7 @@ static inline int arch_write_trylock(arch_rwlock_t *rw)
ret = 1;
}
arch_spin_unlock(&(rw->lock_mutex));
+ local_irq_restore(flags);
return ret;
}
@@ -664,16 +670,24 @@ static inline void arch_write_lock(arch_rwlock_t *rw)
static inline void arch_read_unlock(arch_rwlock_t *rw)
{
+ unsigned long flags;
+
+ local_irq_save(flags);
arch_spin_lock(&(rw->lock_mutex));
rw->counter++;
arch_spin_unlock(&(rw->lock_mutex));
+ local_irq_restore(flags);
}
static inline void arch_write_unlock(arch_rwlock_t *rw)
{
+ unsigned long flags;
+
+ local_irq_save(flags);
arch_spin_lock(&(rw->lock_mutex));
rw->counter = __ARCH_RW_LOCK_UNLOCKED__;
arch_spin_unlock(&(rw->lock_mutex));
+ local_irq_restore(flags);
}
#endif
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 07/18] ARC: rename smp operation init_irq_cpu() to init_per_cpu()
2015-12-01 13:02 ` Noam Camus
@ 2015-12-01 13:02 ` Noam Camus
-1 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc; +Cc: linux-kernel, cmetcalf, Noam Camus
From: Noam Camus <noamc@ezchip.com>
This will better reflect its description i.e. "any needed setup..."
and not just do an "IPI request".
Signed-off-by: Noam Camus <noamc@ezchip.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
---
arch/arc/include/asm/smp.h | 4 ++--
arch/arc/kernel/irq.c | 4 ++--
arch/arc/kernel/mcip.c | 2 +-
arch/arc/kernel/smp.c | 4 ++--
4 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h
index 133c867..9913804 100644
--- a/arch/arc/include/asm/smp.h
+++ b/arch/arc/include/asm/smp.h
@@ -48,7 +48,7 @@ extern int smp_ipi_irq_setup(int cpu, int irq);
* @init_early_smp: A SMP specific h/w block can init itself
* Could be common across platforms so not covered by
* mach_desc->init_early()
- * @init_irq_cpu: Called for each core so SMP h/w block driver can do
+ * @init_per_cpu: Called for each core so SMP h/w block driver can do
* any needed setup per cpu (e.g. IPI request)
* @cpu_kick: For Master to kickstart a cpu (optionally at a PC)
* @ipi_send: To send IPI to a @cpu
@@ -57,7 +57,7 @@ extern int smp_ipi_irq_setup(int cpu, int irq);
struct plat_smp_ops {
const char *info;
void (*init_early_smp)(void);
- void (*init_irq_cpu)(int cpu);
+ void (*init_per_cpu)(int cpu);
void (*cpu_kick)(int cpu, unsigned long pc);
void (*ipi_send)(int cpu);
void (*ipi_clear)(int irq);
diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c
index 2ee2265..a650650 100644
--- a/arch/arc/kernel/irq.c
+++ b/arch/arc/kernel/irq.c
@@ -29,8 +29,8 @@ void __init init_IRQ(void)
#ifdef CONFIG_SMP
/* a SMP H/w block could do IPI IRQ request here */
- if (plat_smp_ops.init_irq_cpu)
- plat_smp_ops.init_irq_cpu(smp_processor_id());
+ if (plat_smp_ops.init_per_cpu)
+ plat_smp_ops.init_per_cpu(smp_processor_id());
if (machine_desc->init_cpu_smp)
machine_desc->init_cpu_smp(smp_processor_id());
diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c
index 74a9b07..bd237ac 100644
--- a/arch/arc/kernel/mcip.c
+++ b/arch/arc/kernel/mcip.c
@@ -132,7 +132,7 @@ static void mcip_probe_n_setup(void)
struct plat_smp_ops plat_smp_ops = {
.info = smp_cpuinfo_buf,
.init_early_smp = mcip_probe_n_setup,
- .init_irq_cpu = mcip_setup_per_cpu,
+ .init_per_cpu = mcip_setup_per_cpu,
.ipi_send = mcip_ipi_send,
.ipi_clear = mcip_ipi_clear,
};
diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c
index 5805878..0b061a4 100644
--- a/arch/arc/kernel/smp.c
+++ b/arch/arc/kernel/smp.c
@@ -132,8 +132,8 @@ void start_kernel_secondary(void)
pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu);
/* Some SMP H/w setup - for each cpu */
- if (plat_smp_ops.init_irq_cpu)
- plat_smp_ops.init_irq_cpu(cpu);
+ if (plat_smp_ops.init_per_cpu)
+ plat_smp_ops.init_per_cpu(cpu);
if (machine_desc->init_cpu_smp)
machine_desc->init_cpu_smp(cpu);
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 07/18] ARC: rename smp operation init_irq_cpu() to init_per_cpu()
@ 2015-12-01 13:02 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc
From: Noam Camus <noamc@ezchip.com>
This will better reflect its description i.e. "any needed setup..."
and not just do an "IPI request".
Signed-off-by: Noam Camus <noamc at ezchip.com>
Acked-by: Vineet Gupta <vgupta at synopsys.com>
---
arch/arc/include/asm/smp.h | 4 ++--
arch/arc/kernel/irq.c | 4 ++--
arch/arc/kernel/mcip.c | 2 +-
arch/arc/kernel/smp.c | 4 ++--
4 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h
index 133c867..9913804 100644
--- a/arch/arc/include/asm/smp.h
+++ b/arch/arc/include/asm/smp.h
@@ -48,7 +48,7 @@ extern int smp_ipi_irq_setup(int cpu, int irq);
* @init_early_smp: A SMP specific h/w block can init itself
* Could be common across platforms so not covered by
* mach_desc->init_early()
- * @init_irq_cpu: Called for each core so SMP h/w block driver can do
+ * @init_per_cpu: Called for each core so SMP h/w block driver can do
* any needed setup per cpu (e.g. IPI request)
* @cpu_kick: For Master to kickstart a cpu (optionally at a PC)
* @ipi_send: To send IPI to a @cpu
@@ -57,7 +57,7 @@ extern int smp_ipi_irq_setup(int cpu, int irq);
struct plat_smp_ops {
const char *info;
void (*init_early_smp)(void);
- void (*init_irq_cpu)(int cpu);
+ void (*init_per_cpu)(int cpu);
void (*cpu_kick)(int cpu, unsigned long pc);
void (*ipi_send)(int cpu);
void (*ipi_clear)(int irq);
diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c
index 2ee2265..a650650 100644
--- a/arch/arc/kernel/irq.c
+++ b/arch/arc/kernel/irq.c
@@ -29,8 +29,8 @@ void __init init_IRQ(void)
#ifdef CONFIG_SMP
/* a SMP H/w block could do IPI IRQ request here */
- if (plat_smp_ops.init_irq_cpu)
- plat_smp_ops.init_irq_cpu(smp_processor_id());
+ if (plat_smp_ops.init_per_cpu)
+ plat_smp_ops.init_per_cpu(smp_processor_id());
if (machine_desc->init_cpu_smp)
machine_desc->init_cpu_smp(smp_processor_id());
diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c
index 74a9b07..bd237ac 100644
--- a/arch/arc/kernel/mcip.c
+++ b/arch/arc/kernel/mcip.c
@@ -132,7 +132,7 @@ static void mcip_probe_n_setup(void)
struct plat_smp_ops plat_smp_ops = {
.info = smp_cpuinfo_buf,
.init_early_smp = mcip_probe_n_setup,
- .init_irq_cpu = mcip_setup_per_cpu,
+ .init_per_cpu = mcip_setup_per_cpu,
.ipi_send = mcip_ipi_send,
.ipi_clear = mcip_ipi_clear,
};
diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c
index 5805878..0b061a4 100644
--- a/arch/arc/kernel/smp.c
+++ b/arch/arc/kernel/smp.c
@@ -132,8 +132,8 @@ void start_kernel_secondary(void)
pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu);
/* Some SMP H/w setup - for each cpu */
- if (plat_smp_ops.init_irq_cpu)
- plat_smp_ops.init_irq_cpu(cpu);
+ if (plat_smp_ops.init_per_cpu)
+ plat_smp_ops.init_per_cpu(cpu);
if (machine_desc->init_cpu_smp)
machine_desc->init_cpu_smp(cpu);
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 08/18] ARC: Mark secondary cpu online only after all HW setup is done
2015-12-01 13:02 ` Noam Camus
@ 2015-12-01 13:02 ` Noam Camus
-1 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc; +Cc: linux-kernel, cmetcalf, Noam Camus
From: Noam Camus <noamc@ezchip.com>
In SMP setup, master loops for each_present_cpu calling cpu_up().
For ARC it returns as soon as new cpu's status becomes online,
However secondary may still do HW initializing,
machine or platform hook level.
So turn secondary online only after all HW setup is done.
Signed-off-by: Noam Camus <noamc@ezchip.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
---
arch/arc/kernel/smp.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c
index 0b061a4..bc0e4f6 100644
--- a/arch/arc/kernel/smp.c
+++ b/arch/arc/kernel/smp.c
@@ -126,11 +126,6 @@ void start_kernel_secondary(void)
current->active_mm = mm;
cpumask_set_cpu(cpu, mm_cpumask(mm));
- notify_cpu_starting(cpu);
- set_cpu_online(cpu, true);
-
- pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu);
-
/* Some SMP H/w setup - for each cpu */
if (plat_smp_ops.init_per_cpu)
plat_smp_ops.init_per_cpu(cpu);
@@ -138,6 +133,11 @@ void start_kernel_secondary(void)
if (machine_desc->init_cpu_smp)
machine_desc->init_cpu_smp(cpu);
+ notify_cpu_starting(cpu);
+ set_cpu_online(cpu, true);
+
+ pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu);
+
arc_local_timer_setup();
local_irq_enable();
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 08/18] ARC: Mark secondary cpu online only after all HW setup is done
@ 2015-12-01 13:02 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc
From: Noam Camus <noamc@ezchip.com>
In SMP setup, master loops for each_present_cpu calling cpu_up().
For ARC it returns as soon as new cpu's status becomes online,
However secondary may still do HW initializing,
machine or platform hook level.
So turn secondary online only after all HW setup is done.
Signed-off-by: Noam Camus <noamc at ezchip.com>
Acked-by: Vineet Gupta <vgupta at synopsys.com>
---
arch/arc/kernel/smp.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c
index 0b061a4..bc0e4f6 100644
--- a/arch/arc/kernel/smp.c
+++ b/arch/arc/kernel/smp.c
@@ -126,11 +126,6 @@ void start_kernel_secondary(void)
current->active_mm = mm;
cpumask_set_cpu(cpu, mm_cpumask(mm));
- notify_cpu_starting(cpu);
- set_cpu_online(cpu, true);
-
- pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu);
-
/* Some SMP H/w setup - for each cpu */
if (plat_smp_ops.init_per_cpu)
plat_smp_ops.init_per_cpu(cpu);
@@ -138,6 +133,11 @@ void start_kernel_secondary(void)
if (machine_desc->init_cpu_smp)
machine_desc->init_cpu_smp(cpu);
+ notify_cpu_starting(cpu);
+ set_cpu_online(cpu, true);
+
+ pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu);
+
arc_local_timer_setup();
local_irq_enable();
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 09/18] ARC: add CONFIG_CLKSRC_OF support to time_init()
2015-12-01 13:02 ` Noam Camus
@ 2015-12-01 13:02 ` Noam Camus
-1 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc; +Cc: linux-kernel, cmetcalf, Noam Camus
From: Noam Camus <noamc@ezchip.com>
External clock source can be used if included by one of
DTS file of a chosen platform.
Signed-off-by: Noam Camus <noamc@ezchip.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
---
arch/arc/kernel/time.c | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c
index dfad287..ea0c47d 100644
--- a/arch/arc/kernel/time.c
+++ b/arch/arc/kernel/time.c
@@ -283,6 +283,10 @@ void __init time_init(void)
*/
clocksource_register_hz(&arc_counter, arc_get_core_freq());
+#ifdef CONFIG_CLKSRC_OF
+ clocksource_probe();
+#endif
+
/* sets up the periodic event timer */
arc_local_timer_setup();
}
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 09/18] ARC: add CONFIG_CLKSRC_OF support to time_init()
@ 2015-12-01 13:02 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc
From: Noam Camus <noamc@ezchip.com>
External clock source can be used if included by one of
DTS file of a chosen platform.
Signed-off-by: Noam Camus <noamc at ezchip.com>
Acked-by: Vineet Gupta <vgupta at synopsys.com>
---
arch/arc/kernel/time.c | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c
index dfad287..ea0c47d 100644
--- a/arch/arc/kernel/time.c
+++ b/arch/arc/kernel/time.c
@@ -283,6 +283,10 @@ void __init time_init(void)
*/
clocksource_register_hz(&arc_counter, arc_get_core_freq());
+#ifdef CONFIG_CLKSRC_OF
+ clocksource_probe();
+#endif
+
/* sets up the periodic event timer */
arc_local_timer_setup();
}
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 10/18] ARC: [plat-eznps] Add eznps board defconfig and dts
2015-12-01 13:02 ` Noam Camus
@ 2015-12-01 13:02 ` Noam Camus
-1 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc; +Cc: linux-kernel, cmetcalf, Noam Camus
From: Noam Camus <noamc@ezchip.com>
Adding default configuration file and DTS file
Signed-off-by: Noam Camus <noamc@ezchip.com>
---
arch/arc/boot/dts/eznps.dts | 76 +++++++++++++++++++++++++++++++++++
arch/arc/configs/nps_defconfig | 85 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 161 insertions(+), 0 deletions(-)
create mode 100644 arch/arc/boot/dts/eznps.dts
create mode 100644 arch/arc/configs/nps_defconfig
diff --git a/arch/arc/boot/dts/eznps.dts b/arch/arc/boot/dts/eznps.dts
new file mode 100644
index 0000000..4d4832a
--- /dev/null
+++ b/arch/arc/boot/dts/eznps.dts
@@ -0,0 +1,76 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "ezchip,arc-nps";
+ clock-frequency = <83333333>; /* 83.333333 MHZ */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ present-cpus = "0-1,16-17";
+ possible-cpus = "0-4095";
+
+ chosen {
+ bootargs = "earlycon=uart8250,mmio32be,0xf7209000,115200n8 console=ttyS0,115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* 512M */
+ };
+
+ fpga {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* child and parent address space 1:1 mapped */
+ ranges;
+
+ intc: interrupt-controller {
+ compatible = "ezchip,nps400-ic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ timer {
+ compatible = "ezchip,nps400-timer";
+ };
+
+ uart@f7209000 {
+ compatible = "snps,dw-apb-uart";
+ device_type = "serial";
+ reg = <0xf7209000 0x100>;
+ interrupts = <6>;
+ clock-frequency = <83333333>;
+ baud = <115200>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ native-endian;
+ };
+
+ ethernet@f7470000 {
+ compatible = "ezchip,nps-mgt-enet";
+ reg = <0xf7470000 0x1940>;
+ interrupts = <7>;
+ mac-address = [ 00 C0 00 F0 04 03 ];
+ };
+ };
+};
diff --git a/arch/arc/configs/nps_defconfig b/arch/arc/configs/nps_defconfig
new file mode 100644
index 0000000..13a67ac
--- /dev/null
+++ b/arch/arc/configs/nps_defconfig
@@ -0,0 +1,85 @@
+CONFIG_CROSS_COMPILE="arceb-linux-"
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARC_PLAT_EZNPS=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4096
+CONFIG_ARC_CACHE_LINE_SHIFT=5
+# CONFIG_ARC_CACHE_PAGES is not set
+# CONFIG_ARC_HAS_LLSC is not set
+CONFIG_ARC_VMALLOC_SIZE=192
+CONFIG_ARC_EMUL_UNALIGNED=y
+CONFIG_ARC_UBOOT_SUPPORT=y
+CONFIG_PREEMPT=y
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=2048
+CONFIG_NETDEVICES=y
+CONFIG_NETCONSOLE=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_ENABLE_DEFAULT_TRACERS=y
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 10/18] ARC: [plat-eznps] Add eznps board defconfig and dts
@ 2015-12-01 13:02 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc
From: Noam Camus <noamc@ezchip.com>
Adding default configuration file and DTS file
Signed-off-by: Noam Camus <noamc at ezchip.com>
---
arch/arc/boot/dts/eznps.dts | 76 +++++++++++++++++++++++++++++++++++
arch/arc/configs/nps_defconfig | 85 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 161 insertions(+), 0 deletions(-)
create mode 100644 arch/arc/boot/dts/eznps.dts
create mode 100644 arch/arc/configs/nps_defconfig
diff --git a/arch/arc/boot/dts/eznps.dts b/arch/arc/boot/dts/eznps.dts
new file mode 100644
index 0000000..4d4832a
--- /dev/null
+++ b/arch/arc/boot/dts/eznps.dts
@@ -0,0 +1,76 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "ezchip,arc-nps";
+ clock-frequency = <83333333>; /* 83.333333 MHZ */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ present-cpus = "0-1,16-17";
+ possible-cpus = "0-4095";
+
+ chosen {
+ bootargs = "earlycon=uart8250,mmio32be,0xf7209000,115200n8 console=ttyS0,115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* 512M */
+ };
+
+ fpga {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* child and parent address space 1:1 mapped */
+ ranges;
+
+ intc: interrupt-controller {
+ compatible = "ezchip,nps400-ic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ timer {
+ compatible = "ezchip,nps400-timer";
+ };
+
+ uart at f7209000 {
+ compatible = "snps,dw-apb-uart";
+ device_type = "serial";
+ reg = <0xf7209000 0x100>;
+ interrupts = <6>;
+ clock-frequency = <83333333>;
+ baud = <115200>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ native-endian;
+ };
+
+ ethernet at f7470000 {
+ compatible = "ezchip,nps-mgt-enet";
+ reg = <0xf7470000 0x1940>;
+ interrupts = <7>;
+ mac-address = [ 00 C0 00 F0 04 03 ];
+ };
+ };
+};
diff --git a/arch/arc/configs/nps_defconfig b/arch/arc/configs/nps_defconfig
new file mode 100644
index 0000000..13a67ac
--- /dev/null
+++ b/arch/arc/configs/nps_defconfig
@@ -0,0 +1,85 @@
+CONFIG_CROSS_COMPILE="arceb-linux-"
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARC_PLAT_EZNPS=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4096
+CONFIG_ARC_CACHE_LINE_SHIFT=5
+# CONFIG_ARC_CACHE_PAGES is not set
+# CONFIG_ARC_HAS_LLSC is not set
+CONFIG_ARC_VMALLOC_SIZE=192
+CONFIG_ARC_EMUL_UNALIGNED=y
+CONFIG_ARC_UBOOT_SUPPORT=y
+CONFIG_PREEMPT=y
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=2048
+CONFIG_NETDEVICES=y
+CONFIG_NETCONSOLE=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_ENABLE_DEFAULT_TRACERS=y
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 11/18] ARC: [plat-eznps] Add eznps platform
2015-12-01 13:02 ` Noam Camus
@ 2015-12-01 13:02 ` Noam Camus
-1 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc; +Cc: linux-kernel, cmetcalf, Noam Camus
From: Noam Camus <noamc@ezchip.com>
This platform include boards:
Hardware Emulator (HE)
Simulator based upon nSIM.
Signed-off-by: Noam Camus <noamc@ezchip.com>
---
MAINTAINERS | 6 +
arch/arc/plat-eznps/Kconfig | 34 ++++
arch/arc/plat-eznps/Makefile | 7 +
arch/arc/plat-eznps/entry.S | 75 +++++++++
arch/arc/plat-eznps/include/plat/ctop.h | 250 +++++++++++++++++++++++++++++++
arch/arc/plat-eznps/include/plat/mtm.h | 60 ++++++++
arch/arc/plat-eznps/include/plat/smp.h | 26 ++++
arch/arc/plat-eznps/mtm.c | 133 ++++++++++++++++
arch/arc/plat-eznps/platform.c | 27 ++++
arch/arc/plat-eznps/smp.c | 149 ++++++++++++++++++
10 files changed, 767 insertions(+), 0 deletions(-)
create mode 100644 arch/arc/plat-eznps/Kconfig
create mode 100644 arch/arc/plat-eznps/Makefile
create mode 100644 arch/arc/plat-eznps/entry.S
create mode 100644 arch/arc/plat-eznps/include/plat/ctop.h
create mode 100644 arch/arc/plat-eznps/include/plat/mtm.h
create mode 100644 arch/arc/plat-eznps/include/plat/smp.h
create mode 100644 arch/arc/plat-eznps/mtm.c
create mode 100644 arch/arc/plat-eznps/platform.c
create mode 100644 arch/arc/plat-eznps/smp.c
diff --git a/MAINTAINERS b/MAINTAINERS
index e9caa4b..abb1897 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4257,6 +4257,12 @@ S: Maintained
F: drivers/video/fbdev/exynos/exynos_mipi*
F: include/video/exynos_mipi*
+EZchip NPS platform support
+M: Noam Camus <noamc@ezchip.com>
+S: Supported
+F: arch/arc/plat-eznps
+F: arch/arc/boot/dts/eznps.dts
+
F71805F HARDWARE MONITORING DRIVER
M: Jean Delvare <jdelvare@suse.com>
L: lm-sensors@lm-sensors.org
diff --git a/arch/arc/plat-eznps/Kconfig b/arch/arc/plat-eznps/Kconfig
new file mode 100644
index 0000000..051fdca
--- /dev/null
+++ b/arch/arc/plat-eznps/Kconfig
@@ -0,0 +1,34 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+menuconfig ARC_PLAT_EZNPS
+ bool "\"EZchip\" ARC dev platform"
+ select ARC_HAS_COH_CACHES if SMP
+ select CPU_BIG_ENDIAN
+ select CLKSRC_NPS
+ select EZCHIP_NPS_MANAGEMENT_ENET if ETHERNET
+ help
+ Support for EZchip development platforms,
+ based on ARC700 cores.
+ We handle few flavours:
+ - Hardware Emulator AKA HE which is FPGA based chasis
+ - Simulator based on MetaWare nSIM
+ - NPS400 chip based on ASIC
+
+config EZNPS_MTM_EXT
+ bool "ARC-EZchip MTM Extensions"
+ select CPUMASK_OFFSTACK
+ depends on ARC_PLAT_EZNPS && SMP
+ default y
+ help
+ Here we add new hierarchy for CPUs topology.
+ We got:
+ Core
+ Thread
+ At the new thread level each CPU represent one HW thread.
+ At highest hierarchy each core contain 16 threads,
+ any of them seem like CPU from Linux point of view.
+ All threads within same core share the execution unit of the
+ core and HW scheduler round robin between them.
diff --git a/arch/arc/plat-eznps/Makefile b/arch/arc/plat-eznps/Makefile
new file mode 100644
index 0000000..21091b1
--- /dev/null
+++ b/arch/arc/plat-eznps/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y := entry.o platform.o
+obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_EZNPS_MTM_EXT) += mtm.o
diff --git a/arch/arc/plat-eznps/entry.S b/arch/arc/plat-eznps/entry.S
new file mode 100644
index 0000000..b4dee38
--- /dev/null
+++ b/arch/arc/plat-eznps/entry.S
@@ -0,0 +1,75 @@
+/*******************************************************************************
+
+ EZNPS CPU startup Code
+ Copyright(c) 2012 EZchip Technologies.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+*******************************************************************************/
+#include <linux/linkage.h>
+#include <asm/entry.h>
+#include <asm/cache.h>
+#include <plat/ctop.h>
+
+ .cpu A7
+
+ .section .init.text, "ax",@progbits
+ .align 1024 ; HW requierment for restart first PC
+
+ENTRY(res_service)
+#ifdef CONFIG_EZNPS_MTM_EXT
+ ; For HW thread != 0 there is no work.
+ lr r3, [CTOP_AUX_THREAD_ID]
+ cmp r3, 0
+ jne stext
+#endif
+
+#ifdef CONFIG_ARC_HAS_DCACHE
+ ; With no cache coherency mechanism D$ need to be used very carefully.
+ ; Address space:
+ ; 0G-2G: We disable CONFIG_ARC_CACHE_PAGES.
+ ; 2G-3G: We disable D$ by setting this bit.
+ ; 3G-4G: D$ is disabled by architecture.
+ ; FMT are huge pages for user application reside at 0-2G.
+ ; Only FMT left as one who can use D$ where each such page got
+ ; disable/enable bit for cachability.
+ ; Programmer will use FMT pages for private data so cache coherency
+ ; would not be a problem.
+ ; First thing we invalidate D$
+ sr 1, [ARC_REG_DC_IVDC]
+ sr HW_COMPLY_KRN_NOT_D_CACHED, [CTOP_AUX_HW_COMPLY]
+#endif
+
+#ifdef CONFIG_SMP
+ ; check for boot CPU
+ lr r3, [CTOP_AUX_GLOBAL_ID]
+ cmp r3, 0
+ jeq stext
+
+ ; We set logical cpuid to be used by GET_CPUID
+ ; We do not use physical cpuid since we want ids to be continious when
+ ; it comes to cpus on the same quad cluster.
+ ; This is useful for applications that used shared resources of a quad
+ ; cluster such SRAMS.
+ lr r3, [CTOP_AUX_CORE_ID]
+ sr r3, [CTOP_AUX_LOGIC_CORE_ID]
+ lr r3, [CTOP_AUX_CLUSTER_ID]
+ ; Set logical is acheived by swap of 2 middle bits of cluster id (4 bit)
+ ; r3 is used since we use short instruction and we need q-class reg
+ .short CTOP_INST_MOV2B_FLIP_R3_B1_B2_INST
+ .word CTOP_INST_MOV2B_FLIP_R3_B1_B2_LIMM
+ sr r3, [CTOP_AUX_LOGIC_CLUSTER_ID]
+#endif
+
+ j stext
+END(res_service)
diff --git a/arch/arc/plat-eznps/include/plat/ctop.h b/arch/arc/plat-eznps/include/plat/ctop.h
new file mode 100644
index 0000000..25a08dc
--- /dev/null
+++ b/arch/arc/plat-eznps/include/plat/ctop.h
@@ -0,0 +1,250 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#ifndef _PLAT_EZNPS_CTOP_H
+#define _PLAT_EZNPS_CTOP_H
+
+#define NPS_HOST_REG_BASE 0xF6000000
+
+/* core auxiliary registers */
+#ifdef __ASSEMBLY__
+#define CTOP_AUX_BASE (-0x800)
+#else
+#define CTOP_AUX_BASE 0xFFFFF800
+#endif
+
+#define CTOP_AUX_GLOBAL_ID (CTOP_AUX_BASE + 0x000)
+#define CTOP_AUX_CLUSTER_ID (CTOP_AUX_BASE + 0x004)
+#define CTOP_AUX_CORE_ID (CTOP_AUX_BASE + 0x008)
+#define CTOP_AUX_THREAD_ID (CTOP_AUX_BASE + 0x00C)
+#define CTOP_AUX_LOGIC_GLOBAL_ID (CTOP_AUX_BASE + 0x010)
+#define CTOP_AUX_LOGIC_CLUSTER_ID (CTOP_AUX_BASE + 0x014)
+#define CTOP_AUX_LOGIC_CORE_ID (CTOP_AUX_BASE + 0x018)
+#define CTOP_AUX_MT_CTRL (CTOP_AUX_BASE + 0x020)
+#define CTOP_AUX_HW_COMPLY (CTOP_AUX_BASE + 0x024)
+#define CTOP_AUX_LPC (CTOP_AUX_BASE + 0x030)
+#define AUX_REG_TSI1 (CTOP_AUX_BASE + 0x050)
+#define CTOP_AUX_EFLAGS (CTOP_AUX_BASE + 0x080)
+#define CTOP_AUX_IACK (CTOP_AUX_BASE + 0x088)
+#define CTOP_AUX_GPA1 (CTOP_AUX_BASE + 0x08C)
+#define CTOP_AUX_UDMC (CTOP_AUX_BASE + 0x300)
+
+/* EZchip core instructions */
+#define CTOP_INST_HWSCHD_OFF_R3 0x3b6f00bf
+#define CTOP_INST_HWSCHD_OFF_R4 0x3c6f00bf
+#define CTOP_INST_HWSCHD_RESTORE_R3 0x3e6f7083
+#define CTOP_INST_HWSCHD_RESTORE_R4 0x3e6f7103
+#define CTOP_INST_SCHD_RW 0x3e6f7004
+#define CTOP_INST_SCHD_RD 0x3e6f7084
+#define CTOP_INST_ASRI_0_R3 0x3b56003e
+#define CTOP_INST_XEX_DI_R2_R2_R3 0x4a664c00
+#define CTOP_INST_EXC_DI_R2_R2_R3 0x4a664c01
+#define CTOP_INST_AADD_DI_R2_R2_R3 0x4a664c02
+#define CTOP_INST_AAND_DI_R2_R2_R3 0x4a664c04
+#define CTOP_INST_AOR_DI_R2_R2_R3 0x4a664c05
+#define CTOP_INST_AXOR_DI_R2_R2_R3 0x4a664c06
+#define CTOP_INST_MOV2B_FLIP_R3_B1_B2_INST 0x5b60
+#define CTOP_INST_MOV2B_FLIP_R3_B1_B2_LIMM 0x00010422
+#define CTOP_INST_RSPI_GIC_0_R12 0x3c56117e
+
+/* Do not use D$ for address in 2G-3G */
+#define HW_COMPLY_KRN_NOT_D_CACHED _BITUL(28)
+
+#ifndef __ASSEMBLY__
+#define NPS_MSU_BLKID 0x018
+#define NPS_CRG_BLKID 0x480
+#define NPS_CRG_SYNC_BIT _BITUL(0)
+#define NPS_GIM_BLKID 0x5C0
+
+/* CPU global ID */
+struct global_id {
+ union {
+ struct {
+#ifdef CONFIG_EZNPS_MTM_EXT
+ u32 __reserved:20, cluster:4, core:4, thread:4;
+#else
+ u32 __reserved:24, cluster:4, core:4;
+#endif
+ };
+ u32 value;
+ };
+};
+
+/*
+ * Convert logical to physical CPU IDs
+ *
+ * The conversion swap bits 1 and 2 of cluster id (out of 4 bits)
+ * Now quad of logical clusters id's are adjacent physically,
+ * and not like the id's physically came with each cluster.
+ * Below table is 4x4 mesh of core clusters as it layout on chip.
+ * Cluster ids are in format: logical (physical)
+ *
+ * ----------------- ------------------
+ * 3 | 5 (3) 7 (7) | | 13 (11) 15 (15)|
+ *
+ * 2 | 4 (2) 6 (6) | | 12 (10) 14 (14)|
+ * ----------------- ------------------
+ * 1 | 1 (1) 3 (5) | | 9 (9) 11 (13)|
+ *
+ * 0 | 0 (0) 2 (4) | | 8 (8) 10 (12)|
+ * ----------------- ------------------
+ * 0 1 2 3
+ */
+static inline int nps_cluster_logic_to_phys(int cluster)
+{
+ __asm__ __volatile__(
+ " mov r3,%0\n"
+ " .short %1\n"
+ " .word %2\n"
+ " mov %0,r3\n"
+ : "+r"(cluster)
+ : "i"(CTOP_INST_MOV2B_FLIP_R3_B1_B2_INST),
+ "i"(CTOP_INST_MOV2B_FLIP_R3_B1_B2_LIMM)
+ : "r3");
+
+ return cluster;
+}
+
+#define NPS_CPU_TO_CLUSTER_NUM(cpu) \
+ ({ struct global_id gid; gid.value = cpu; \
+ nps_cluster_logic_to_phys(gid.cluster); })
+
+struct nps_host_reg_address {
+ union {
+ struct {
+ u32 base:8, cl_x:4, cl_y:4,
+ blkid:6, reg:8, __reserved:2;
+ };
+ u32 value;
+ };
+};
+
+struct nps_host_reg_mtm_cfg {
+ union {
+ struct {
+ u32 gen:1, gdis:1, clk_gate_dis:1, asb:1,
+ __reserved:9, nat:3, ten:16;
+ };
+ u32 value;
+ };
+};
+
+struct nps_host_reg_mtm_cpu_cfg {
+ union {
+ struct {
+ u32 csa:22, dmsid:6, __reserved:3, cs:1;
+ };
+ u32 value;
+ };
+};
+
+struct nps_host_reg_thr_init {
+ union {
+ struct {
+ u32 str:1, __reserved:27, thr_id:4;
+ };
+ u32 value;
+ };
+};
+
+struct nps_host_reg_thr_init_sts {
+ union {
+ struct {
+ u32 bsy:1, err:1, __reserved:26, thr_id:4;
+ };
+ u32 value;
+ };
+};
+
+struct nps_host_reg_aux_udmc {
+ union {
+ struct {
+ u32 dcp:1, cme:1, __reserved:20, nat:3,
+ __reserved2:5, dcas:3;
+ };
+ u32 value;
+ };
+};
+
+struct nps_host_reg_aux_mt_ctrl {
+ union {
+ struct {
+ u32 mten:1, hsen:1, scd:1, sten:1,
+ st_cnt:8, __reserved:8,
+ hs_cnt:8, __reserved1:4;
+ };
+ u32 value;
+ };
+};
+
+struct nps_host_reg_aux_hw_comply {
+ union {
+ struct {
+ u32 me:1, le:1, te:1, knc:1, __reserved:28;
+ };
+ u32 value;
+ };
+};
+
+struct nps_host_reg_aux_lpc {
+ union {
+ struct {
+ u32 mep:1, __reserved:31;
+ };
+ u32 value;
+ };
+};
+
+struct nps_host_reg_address_non_cl {
+ union {
+ struct {
+ u32 base:7, blkid:11, reg:12, __reserved:2;
+ };
+ u32 value;
+ };
+};
+
+static inline void *nps_host_reg_non_cl(u32 blkid, u32 reg)
+{
+ struct nps_host_reg_address_non_cl reg_address;
+
+ reg_address.value = NPS_HOST_REG_BASE;
+ reg_address.blkid = blkid;
+ reg_address.reg = reg;
+
+ return (void *)reg_address.value;
+}
+
+static inline void *nps_host_reg(u32 cpu, u32 blkid, u32 reg)
+{
+ struct nps_host_reg_address reg_address;
+ u32 cl = NPS_CPU_TO_CLUSTER_NUM(cpu);
+
+ reg_address.value = NPS_HOST_REG_BASE;
+ reg_address.cl_x = (cl >> 2) & 0x3;
+ reg_address.cl_y = cl & 0x3;
+ reg_address.blkid = blkid;
+ reg_address.reg = reg;
+
+ return (void *)reg_address.value;
+}
+
+/* CRG registers */
+#define REG_GEN_PURP_0 nps_host_reg_non_cl(NPS_CRG_BLKID, 0x1BF)
+
+#endif /* __ASEMBLY__ */
+
+#endif /* _PLAT_EZNPS_CTOP_H */
diff --git a/arch/arc/plat-eznps/include/plat/mtm.h b/arch/arc/plat-eznps/include/plat/mtm.h
new file mode 100644
index 0000000..29b91b5
--- /dev/null
+++ b/arch/arc/plat-eznps/include/plat/mtm.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#ifndef _PLAT_EZNPS_MTM_H
+#define _PLAT_EZNPS_MTM_H
+
+#include <plat/ctop.h>
+
+static inline void *nps_mtm_reg_addr(u32 cpu, u32 reg)
+{
+ struct global_id gid;
+ u32 core, blkid;
+
+ gid.value = cpu;
+ core = gid.core;
+ blkid = (((core & 0x0C) << 2) | (core & 0x03));
+
+ return nps_host_reg(cpu, blkid, reg);
+}
+
+#ifdef CONFIG_EZNPS_MTM_EXT
+#define NPS_CPU_TO_THREAD_NUM(cpu) \
+ ({ struct global_id gid; gid.value = cpu; gid.thread; })
+
+/* MTM registers */
+#define MTM_CFG(cpu) nps_mtm_reg_addr(cpu, 0x81)
+#define MTM_THR_INIT(cpu) nps_mtm_reg_addr(cpu, 0x92)
+#define MTM_THR_INIT_STS(cpu) nps_mtm_reg_addr(cpu, 0x93)
+
+#define get_thread(map) map.thread
+#define eznps_max_cpus 4096
+#define eznps_cpus_per_cluster 256
+
+void mtm_enable_core(unsigned int cpu);
+int mtm_enable_thread(int cpu);
+#else /* !CONFIG_EZNPS_MTM_EXT */
+
+#define get_thread(map) 0
+#define eznps_max_cpus 256
+#define eznps_cpus_per_cluster 16
+#define mtm_enable_core(cpu)
+#define mtm_enable_thread(cpu) 1
+#define NPS_CPU_TO_THREAD_NUM(cpu) 0
+
+#endif /* CONFIG_EZNPS_MTM_EXT */
+
+#endif /* _PLAT_EZNPS_MTM_H */
diff --git a/arch/arc/plat-eznps/include/plat/smp.h b/arch/arc/plat-eznps/include/plat/smp.h
new file mode 100644
index 0000000..06b59bd
--- /dev/null
+++ b/arch/arc/plat-eznps/include/plat/smp.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#ifndef __PLAT_EZNPS_SMP_H
+#define __PLAT_EZNPS_SMP_H
+
+#ifdef CONFIG_SMP
+
+extern void res_service(void);
+
+#endif /* CONFIG_SMP */
+
+#endif
diff --git a/arch/arc/plat-eznps/mtm.c b/arch/arc/plat-eznps/mtm.c
new file mode 100644
index 0000000..aaaaffd
--- /dev/null
+++ b/arch/arc/plat-eznps/mtm.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/log2.h>
+#include <asm/arcregs.h>
+#include <plat/mtm.h>
+#include <plat/smp.h>
+
+#define MT_CTRL_HS_CNT 0xFF
+#define MT_CTRL_ST_CNT 0xF
+#define NPS_NUM_HW_THREADS 0x10
+
+static void mtm_init_nat(int cpu)
+{
+ struct nps_host_reg_mtm_cfg mtm_cfg;
+ struct nps_host_reg_aux_udmc udmc;
+ int log_nat, nat = 0, i, t;
+
+ /* Iterate core threads and update nat */
+ for (i = 0, t = cpu; i < NPS_NUM_HW_THREADS; i++, t++)
+ nat += test_bit(t, cpumask_bits(cpu_possible_mask));
+
+ log_nat = ilog2(nat);
+
+ udmc.value = read_aux_reg(CTOP_AUX_UDMC);
+ udmc.nat = log_nat;
+ write_aux_reg(CTOP_AUX_UDMC, udmc.value);
+
+ mtm_cfg.value = ioread32be(MTM_CFG(cpu));
+ mtm_cfg.nat = log_nat;
+ iowrite32be(mtm_cfg.value, MTM_CFG(cpu));
+}
+
+static void mtm_init_thread(int cpu)
+{
+ int i, tries = 5;
+ struct nps_host_reg_thr_init thr_init;
+ struct nps_host_reg_thr_init_sts thr_init_sts;
+
+ /* Set thread init register */
+ thr_init.value = 0;
+ iowrite32be(thr_init.value, MTM_THR_INIT(cpu));
+ thr_init.thr_id = NPS_CPU_TO_THREAD_NUM(cpu);
+ thr_init.str = 1;
+ iowrite32be(thr_init.value, MTM_THR_INIT(cpu));
+
+ /* Poll till thread init is done */
+ for (i = 0; i < tries; i++) {
+ thr_init_sts.value = ioread32be(MTM_THR_INIT_STS(cpu));
+ if (thr_init_sts.thr_id == thr_init.thr_id) {
+ if (thr_init_sts.bsy)
+ continue;
+ else if (thr_init_sts.err)
+ pr_warn("Failed to thread init cpu %u\n", cpu);
+ break;
+ }
+
+ pr_warn("Wrong thread id in thread init for cpu %u\n", cpu);
+ break;
+ }
+
+ if (i == tries)
+ pr_warn("Got thread init timeout for cpu %u\n", cpu);
+}
+
+int mtm_enable_thread(int cpu)
+{
+ struct nps_host_reg_mtm_cfg mtm_cfg;
+
+ if (NPS_CPU_TO_THREAD_NUM(cpu) == 0)
+ return 1;
+
+ /* Enable thread in mtm */
+ mtm_cfg.value = ioread32be(MTM_CFG(cpu));
+ mtm_cfg.ten |= (1 << (NPS_CPU_TO_THREAD_NUM(cpu)));
+ iowrite32be(mtm_cfg.value, MTM_CFG(cpu));
+
+ return 0;
+}
+
+void mtm_enable_core(unsigned int cpu)
+{
+ int i;
+ struct nps_host_reg_aux_mt_ctrl mt_ctrl;
+ struct nps_host_reg_mtm_cfg mtm_cfg;
+
+ if (NPS_CPU_TO_THREAD_NUM(cpu) != 0)
+ return;
+
+ /* Initialize Number of Active Threads */
+ mtm_init_nat(cpu);
+
+ /* Initialize mtm_cfg */
+ mtm_cfg.value = ioread32be(MTM_CFG(cpu));
+ mtm_cfg.ten = 1;
+ iowrite32be(mtm_cfg.value, MTM_CFG(cpu));
+
+ /* Initialize all other threads in core */
+ for (i = 1; i < NPS_NUM_HW_THREADS; i++)
+ mtm_init_thread(cpu + i);
+
+
+ /* Enable HW schedule, stall counter, mtm */
+ mt_ctrl.value = 0;
+ mt_ctrl.hsen = 1;
+ mt_ctrl.hs_cnt = MT_CTRL_HS_CNT;
+ mt_ctrl.sten = 1;
+ mt_ctrl.st_cnt = MT_CTRL_ST_CNT;
+ mt_ctrl.mten = 1;
+ write_aux_reg(CTOP_AUX_MT_CTRL, mt_ctrl.value);
+
+ /*
+ * HW scheduling mechanism will start working
+ * Only after call to instruction "schd.rw".
+ * cpu_relax() calls "schd.rw" instruction.
+ */
+ cpu_relax();
+}
diff --git a/arch/arc/plat-eznps/platform.c b/arch/arc/plat-eznps/platform.c
new file mode 100644
index 0000000..12efeb6
--- /dev/null
+++ b/arch/arc/plat-eznps/platform.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#include <linux/init.h>
+#include <asm/mach_desc.h>
+
+static const char *eznps_compat[] __initconst = {
+ "ezchip,arc-nps",
+ NULL,
+};
+
+MACHINE_START(NPS, "nps")
+ .dt_compat = eznps_compat,
+MACHINE_END
diff --git a/arch/arc/plat-eznps/smp.c b/arch/arc/plat-eznps/smp.c
new file mode 100644
index 0000000..87849a3
--- /dev/null
+++ b/arch/arc/plat-eznps/smp.c
@@ -0,0 +1,149 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#include <linux/smp.h>
+#include <linux/of_fdt.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <plat/ctop.h>
+#include <plat/smp.h>
+#include <plat/mtm.h>
+
+#define NPS_DEFAULT_MSID 0x34
+#define NPS_MTM_CPU_CFG 0x90
+
+static char smp_cpuinfo_buf[128] = {"Extn [EZNPS-SMP]\t: On\n"};
+
+/* Get cpu map from device tree */
+static int __init eznps_get_map(const char *name, struct cpumask *cpumask)
+{
+ unsigned long dt_root = of_get_flat_dt_root();
+ const char *buf;
+
+ buf = of_get_flat_dt_prop(dt_root, name, NULL);
+ if (!buf)
+ return 1;
+
+ cpulist_parse(buf, cpumask);
+
+ return 0;
+}
+
+/* Update board cpu maps */
+static void __init eznps_init_cpumasks(void)
+{
+ struct cpumask cpumask;
+
+ if (eznps_get_map("present-cpus", &cpumask)) {
+ pr_err("Failed to get present-cpus from dtb");
+ return;
+ }
+ init_cpu_present(&cpumask);
+
+ if (eznps_get_map("possible-cpus", &cpumask)) {
+ pr_err("Failed to get possible-cpus from dtb");
+ return;
+ }
+ init_cpu_possible(&cpumask);
+}
+
+static void eznps_init_core(unsigned int cpu)
+{
+ u32 sync_value;
+ struct nps_host_reg_aux_hw_comply hw_comply;
+ struct nps_host_reg_aux_lpc lpc;
+
+ if (NPS_CPU_TO_THREAD_NUM(cpu) != 0)
+ return;
+
+ hw_comply.value = read_aux_reg(CTOP_AUX_HW_COMPLY);
+ hw_comply.me = 1;
+ hw_comply.le = 1;
+ hw_comply.te = 1;
+ write_aux_reg(CTOP_AUX_HW_COMPLY, hw_comply.value);
+
+ /* Enable MMU clock */
+ lpc.mep = 1;
+ write_aux_reg(CTOP_AUX_LPC, lpc.value);
+
+ /* Boot CPU only */
+ if (!cpu) {
+ /* Write to general purpose register in CRG */
+ sync_value = ioread32be(REG_GEN_PURP_0);
+ sync_value |= NPS_CRG_SYNC_BIT;
+ iowrite32be(sync_value, REG_GEN_PURP_0);
+ }
+}
+
+/*
+ * Master kick starting another CPU
+ */
+static void __init eznps_smp_wakeup_cpu(int cpu, unsigned long pc)
+{
+ struct nps_host_reg_mtm_cpu_cfg cpu_cfg;
+
+ if (mtm_enable_thread(cpu) == 0)
+ return;
+
+ /* set PC, dmsid, and start CPU */
+ cpu_cfg.value = (u32)res_service;
+ cpu_cfg.dmsid = NPS_DEFAULT_MSID;
+ cpu_cfg.cs = 1;
+ iowrite32be(cpu_cfg.value, nps_mtm_reg_addr(cpu, NPS_MTM_CPU_CFG));
+}
+
+static void eznps_ipi_send(int cpu)
+{
+ struct global_id gid;
+ struct {
+ union {
+ struct {
+ u32 num:8, cluster:8, core:8, thread:8;
+ };
+ u32 value;
+ };
+ } ipi;
+
+ gid.value = cpu;
+ ipi.thread = get_thread(gid);
+ ipi.core = gid.core;
+ ipi.cluster = nps_cluster_logic_to_phys(gid.cluster);
+ ipi.num = IPI_IRQ;
+
+ __asm__ __volatile__(
+ " mov r3, %0\n"
+ " .word %1\n"
+ :
+ : "r"(ipi.value), "i"(CTOP_INST_ASRI_0_R3)
+ : "r3");
+}
+
+static void eznps_init_per_cpu(int cpu)
+{
+ smp_ipi_irq_setup(cpu, IPI_IRQ);
+
+ eznps_init_core(cpu);
+ mtm_enable_core(cpu);
+}
+
+struct plat_smp_ops plat_smp_ops = {
+ .info = smp_cpuinfo_buf,
+ .init_early_smp = eznps_init_cpumasks,
+ .cpu_kick = eznps_smp_wakeup_cpu,
+ .ipi_send = eznps_ipi_send,
+ .init_per_cpu = eznps_init_per_cpu,
+};
+
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 11/18] ARC: [plat-eznps] Add eznps platform
@ 2015-12-01 13:02 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc
From: Noam Camus <noamc@ezchip.com>
This platform include boards:
Hardware Emulator (HE)
Simulator based upon nSIM.
Signed-off-by: Noam Camus <noamc at ezchip.com>
---
MAINTAINERS | 6 +
arch/arc/plat-eznps/Kconfig | 34 ++++
arch/arc/plat-eznps/Makefile | 7 +
arch/arc/plat-eznps/entry.S | 75 +++++++++
arch/arc/plat-eznps/include/plat/ctop.h | 250 +++++++++++++++++++++++++++++++
arch/arc/plat-eznps/include/plat/mtm.h | 60 ++++++++
arch/arc/plat-eznps/include/plat/smp.h | 26 ++++
arch/arc/plat-eznps/mtm.c | 133 ++++++++++++++++
arch/arc/plat-eznps/platform.c | 27 ++++
arch/arc/plat-eznps/smp.c | 149 ++++++++++++++++++
10 files changed, 767 insertions(+), 0 deletions(-)
create mode 100644 arch/arc/plat-eznps/Kconfig
create mode 100644 arch/arc/plat-eznps/Makefile
create mode 100644 arch/arc/plat-eznps/entry.S
create mode 100644 arch/arc/plat-eznps/include/plat/ctop.h
create mode 100644 arch/arc/plat-eznps/include/plat/mtm.h
create mode 100644 arch/arc/plat-eznps/include/plat/smp.h
create mode 100644 arch/arc/plat-eznps/mtm.c
create mode 100644 arch/arc/plat-eznps/platform.c
create mode 100644 arch/arc/plat-eznps/smp.c
diff --git a/MAINTAINERS b/MAINTAINERS
index e9caa4b..abb1897 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4257,6 +4257,12 @@ S: Maintained
F: drivers/video/fbdev/exynos/exynos_mipi*
F: include/video/exynos_mipi*
+EZchip NPS platform support
+M: Noam Camus <noamc at ezchip.com>
+S: Supported
+F: arch/arc/plat-eznps
+F: arch/arc/boot/dts/eznps.dts
+
F71805F HARDWARE MONITORING DRIVER
M: Jean Delvare <jdelvare at suse.com>
L: lm-sensors at lm-sensors.org
diff --git a/arch/arc/plat-eznps/Kconfig b/arch/arc/plat-eznps/Kconfig
new file mode 100644
index 0000000..051fdca
--- /dev/null
+++ b/arch/arc/plat-eznps/Kconfig
@@ -0,0 +1,34 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+menuconfig ARC_PLAT_EZNPS
+ bool "\"EZchip\" ARC dev platform"
+ select ARC_HAS_COH_CACHES if SMP
+ select CPU_BIG_ENDIAN
+ select CLKSRC_NPS
+ select EZCHIP_NPS_MANAGEMENT_ENET if ETHERNET
+ help
+ Support for EZchip development platforms,
+ based on ARC700 cores.
+ We handle few flavours:
+ - Hardware Emulator AKA HE which is FPGA based chasis
+ - Simulator based on MetaWare nSIM
+ - NPS400 chip based on ASIC
+
+config EZNPS_MTM_EXT
+ bool "ARC-EZchip MTM Extensions"
+ select CPUMASK_OFFSTACK
+ depends on ARC_PLAT_EZNPS && SMP
+ default y
+ help
+ Here we add new hierarchy for CPUs topology.
+ We got:
+ Core
+ Thread
+ At the new thread level each CPU represent one HW thread.
+ At highest hierarchy each core contain 16 threads,
+ any of them seem like CPU from Linux point of view.
+ All threads within same core share the execution unit of the
+ core and HW scheduler round robin between them.
diff --git a/arch/arc/plat-eznps/Makefile b/arch/arc/plat-eznps/Makefile
new file mode 100644
index 0000000..21091b1
--- /dev/null
+++ b/arch/arc/plat-eznps/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y := entry.o platform.o
+obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_EZNPS_MTM_EXT) += mtm.o
diff --git a/arch/arc/plat-eznps/entry.S b/arch/arc/plat-eznps/entry.S
new file mode 100644
index 0000000..b4dee38
--- /dev/null
+++ b/arch/arc/plat-eznps/entry.S
@@ -0,0 +1,75 @@
+/*******************************************************************************
+
+ EZNPS CPU startup Code
+ Copyright(c) 2012 EZchip Technologies.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+*******************************************************************************/
+#include <linux/linkage.h>
+#include <asm/entry.h>
+#include <asm/cache.h>
+#include <plat/ctop.h>
+
+ .cpu A7
+
+ .section .init.text, "ax", at progbits
+ .align 1024 ; HW requierment for restart first PC
+
+ENTRY(res_service)
+#ifdef CONFIG_EZNPS_MTM_EXT
+ ; For HW thread != 0 there is no work.
+ lr r3, [CTOP_AUX_THREAD_ID]
+ cmp r3, 0
+ jne stext
+#endif
+
+#ifdef CONFIG_ARC_HAS_DCACHE
+ ; With no cache coherency mechanism D$ need to be used very carefully.
+ ; Address space:
+ ; 0G-2G: We disable CONFIG_ARC_CACHE_PAGES.
+ ; 2G-3G: We disable D$ by setting this bit.
+ ; 3G-4G: D$ is disabled by architecture.
+ ; FMT are huge pages for user application reside at 0-2G.
+ ; Only FMT left as one who can use D$ where each such page got
+ ; disable/enable bit for cachability.
+ ; Programmer will use FMT pages for private data so cache coherency
+ ; would not be a problem.
+ ; First thing we invalidate D$
+ sr 1, [ARC_REG_DC_IVDC]
+ sr HW_COMPLY_KRN_NOT_D_CACHED, [CTOP_AUX_HW_COMPLY]
+#endif
+
+#ifdef CONFIG_SMP
+ ; check for boot CPU
+ lr r3, [CTOP_AUX_GLOBAL_ID]
+ cmp r3, 0
+ jeq stext
+
+ ; We set logical cpuid to be used by GET_CPUID
+ ; We do not use physical cpuid since we want ids to be continious when
+ ; it comes to cpus on the same quad cluster.
+ ; This is useful for applications that used shared resources of a quad
+ ; cluster such SRAMS.
+ lr r3, [CTOP_AUX_CORE_ID]
+ sr r3, [CTOP_AUX_LOGIC_CORE_ID]
+ lr r3, [CTOP_AUX_CLUSTER_ID]
+ ; Set logical is acheived by swap of 2 middle bits of cluster id (4 bit)
+ ; r3 is used since we use short instruction and we need q-class reg
+ .short CTOP_INST_MOV2B_FLIP_R3_B1_B2_INST
+ .word CTOP_INST_MOV2B_FLIP_R3_B1_B2_LIMM
+ sr r3, [CTOP_AUX_LOGIC_CLUSTER_ID]
+#endif
+
+ j stext
+END(res_service)
diff --git a/arch/arc/plat-eznps/include/plat/ctop.h b/arch/arc/plat-eznps/include/plat/ctop.h
new file mode 100644
index 0000000..25a08dc
--- /dev/null
+++ b/arch/arc/plat-eznps/include/plat/ctop.h
@@ -0,0 +1,250 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#ifndef _PLAT_EZNPS_CTOP_H
+#define _PLAT_EZNPS_CTOP_H
+
+#define NPS_HOST_REG_BASE 0xF6000000
+
+/* core auxiliary registers */
+#ifdef __ASSEMBLY__
+#define CTOP_AUX_BASE (-0x800)
+#else
+#define CTOP_AUX_BASE 0xFFFFF800
+#endif
+
+#define CTOP_AUX_GLOBAL_ID (CTOP_AUX_BASE + 0x000)
+#define CTOP_AUX_CLUSTER_ID (CTOP_AUX_BASE + 0x004)
+#define CTOP_AUX_CORE_ID (CTOP_AUX_BASE + 0x008)
+#define CTOP_AUX_THREAD_ID (CTOP_AUX_BASE + 0x00C)
+#define CTOP_AUX_LOGIC_GLOBAL_ID (CTOP_AUX_BASE + 0x010)
+#define CTOP_AUX_LOGIC_CLUSTER_ID (CTOP_AUX_BASE + 0x014)
+#define CTOP_AUX_LOGIC_CORE_ID (CTOP_AUX_BASE + 0x018)
+#define CTOP_AUX_MT_CTRL (CTOP_AUX_BASE + 0x020)
+#define CTOP_AUX_HW_COMPLY (CTOP_AUX_BASE + 0x024)
+#define CTOP_AUX_LPC (CTOP_AUX_BASE + 0x030)
+#define AUX_REG_TSI1 (CTOP_AUX_BASE + 0x050)
+#define CTOP_AUX_EFLAGS (CTOP_AUX_BASE + 0x080)
+#define CTOP_AUX_IACK (CTOP_AUX_BASE + 0x088)
+#define CTOP_AUX_GPA1 (CTOP_AUX_BASE + 0x08C)
+#define CTOP_AUX_UDMC (CTOP_AUX_BASE + 0x300)
+
+/* EZchip core instructions */
+#define CTOP_INST_HWSCHD_OFF_R3 0x3b6f00bf
+#define CTOP_INST_HWSCHD_OFF_R4 0x3c6f00bf
+#define CTOP_INST_HWSCHD_RESTORE_R3 0x3e6f7083
+#define CTOP_INST_HWSCHD_RESTORE_R4 0x3e6f7103
+#define CTOP_INST_SCHD_RW 0x3e6f7004
+#define CTOP_INST_SCHD_RD 0x3e6f7084
+#define CTOP_INST_ASRI_0_R3 0x3b56003e
+#define CTOP_INST_XEX_DI_R2_R2_R3 0x4a664c00
+#define CTOP_INST_EXC_DI_R2_R2_R3 0x4a664c01
+#define CTOP_INST_AADD_DI_R2_R2_R3 0x4a664c02
+#define CTOP_INST_AAND_DI_R2_R2_R3 0x4a664c04
+#define CTOP_INST_AOR_DI_R2_R2_R3 0x4a664c05
+#define CTOP_INST_AXOR_DI_R2_R2_R3 0x4a664c06
+#define CTOP_INST_MOV2B_FLIP_R3_B1_B2_INST 0x5b60
+#define CTOP_INST_MOV2B_FLIP_R3_B1_B2_LIMM 0x00010422
+#define CTOP_INST_RSPI_GIC_0_R12 0x3c56117e
+
+/* Do not use D$ for address in 2G-3G */
+#define HW_COMPLY_KRN_NOT_D_CACHED _BITUL(28)
+
+#ifndef __ASSEMBLY__
+#define NPS_MSU_BLKID 0x018
+#define NPS_CRG_BLKID 0x480
+#define NPS_CRG_SYNC_BIT _BITUL(0)
+#define NPS_GIM_BLKID 0x5C0
+
+/* CPU global ID */
+struct global_id {
+ union {
+ struct {
+#ifdef CONFIG_EZNPS_MTM_EXT
+ u32 __reserved:20, cluster:4, core:4, thread:4;
+#else
+ u32 __reserved:24, cluster:4, core:4;
+#endif
+ };
+ u32 value;
+ };
+};
+
+/*
+ * Convert logical to physical CPU IDs
+ *
+ * The conversion swap bits 1 and 2 of cluster id (out of 4 bits)
+ * Now quad of logical clusters id's are adjacent physically,
+ * and not like the id's physically came with each cluster.
+ * Below table is 4x4 mesh of core clusters as it layout on chip.
+ * Cluster ids are in format: logical (physical)
+ *
+ * ----------------- ------------------
+ * 3 | 5 (3) 7 (7) | | 13 (11) 15 (15)|
+ *
+ * 2 | 4 (2) 6 (6) | | 12 (10) 14 (14)|
+ * ----------------- ------------------
+ * 1 | 1 (1) 3 (5) | | 9 (9) 11 (13)|
+ *
+ * 0 | 0 (0) 2 (4) | | 8 (8) 10 (12)|
+ * ----------------- ------------------
+ * 0 1 2 3
+ */
+static inline int nps_cluster_logic_to_phys(int cluster)
+{
+ __asm__ __volatile__(
+ " mov r3,%0\n"
+ " .short %1\n"
+ " .word %2\n"
+ " mov %0,r3\n"
+ : "+r"(cluster)
+ : "i"(CTOP_INST_MOV2B_FLIP_R3_B1_B2_INST),
+ "i"(CTOP_INST_MOV2B_FLIP_R3_B1_B2_LIMM)
+ : "r3");
+
+ return cluster;
+}
+
+#define NPS_CPU_TO_CLUSTER_NUM(cpu) \
+ ({ struct global_id gid; gid.value = cpu; \
+ nps_cluster_logic_to_phys(gid.cluster); })
+
+struct nps_host_reg_address {
+ union {
+ struct {
+ u32 base:8, cl_x:4, cl_y:4,
+ blkid:6, reg:8, __reserved:2;
+ };
+ u32 value;
+ };
+};
+
+struct nps_host_reg_mtm_cfg {
+ union {
+ struct {
+ u32 gen:1, gdis:1, clk_gate_dis:1, asb:1,
+ __reserved:9, nat:3, ten:16;
+ };
+ u32 value;
+ };
+};
+
+struct nps_host_reg_mtm_cpu_cfg {
+ union {
+ struct {
+ u32 csa:22, dmsid:6, __reserved:3, cs:1;
+ };
+ u32 value;
+ };
+};
+
+struct nps_host_reg_thr_init {
+ union {
+ struct {
+ u32 str:1, __reserved:27, thr_id:4;
+ };
+ u32 value;
+ };
+};
+
+struct nps_host_reg_thr_init_sts {
+ union {
+ struct {
+ u32 bsy:1, err:1, __reserved:26, thr_id:4;
+ };
+ u32 value;
+ };
+};
+
+struct nps_host_reg_aux_udmc {
+ union {
+ struct {
+ u32 dcp:1, cme:1, __reserved:20, nat:3,
+ __reserved2:5, dcas:3;
+ };
+ u32 value;
+ };
+};
+
+struct nps_host_reg_aux_mt_ctrl {
+ union {
+ struct {
+ u32 mten:1, hsen:1, scd:1, sten:1,
+ st_cnt:8, __reserved:8,
+ hs_cnt:8, __reserved1:4;
+ };
+ u32 value;
+ };
+};
+
+struct nps_host_reg_aux_hw_comply {
+ union {
+ struct {
+ u32 me:1, le:1, te:1, knc:1, __reserved:28;
+ };
+ u32 value;
+ };
+};
+
+struct nps_host_reg_aux_lpc {
+ union {
+ struct {
+ u32 mep:1, __reserved:31;
+ };
+ u32 value;
+ };
+};
+
+struct nps_host_reg_address_non_cl {
+ union {
+ struct {
+ u32 base:7, blkid:11, reg:12, __reserved:2;
+ };
+ u32 value;
+ };
+};
+
+static inline void *nps_host_reg_non_cl(u32 blkid, u32 reg)
+{
+ struct nps_host_reg_address_non_cl reg_address;
+
+ reg_address.value = NPS_HOST_REG_BASE;
+ reg_address.blkid = blkid;
+ reg_address.reg = reg;
+
+ return (void *)reg_address.value;
+}
+
+static inline void *nps_host_reg(u32 cpu, u32 blkid, u32 reg)
+{
+ struct nps_host_reg_address reg_address;
+ u32 cl = NPS_CPU_TO_CLUSTER_NUM(cpu);
+
+ reg_address.value = NPS_HOST_REG_BASE;
+ reg_address.cl_x = (cl >> 2) & 0x3;
+ reg_address.cl_y = cl & 0x3;
+ reg_address.blkid = blkid;
+ reg_address.reg = reg;
+
+ return (void *)reg_address.value;
+}
+
+/* CRG registers */
+#define REG_GEN_PURP_0 nps_host_reg_non_cl(NPS_CRG_BLKID, 0x1BF)
+
+#endif /* __ASEMBLY__ */
+
+#endif /* _PLAT_EZNPS_CTOP_H */
diff --git a/arch/arc/plat-eznps/include/plat/mtm.h b/arch/arc/plat-eznps/include/plat/mtm.h
new file mode 100644
index 0000000..29b91b5
--- /dev/null
+++ b/arch/arc/plat-eznps/include/plat/mtm.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#ifndef _PLAT_EZNPS_MTM_H
+#define _PLAT_EZNPS_MTM_H
+
+#include <plat/ctop.h>
+
+static inline void *nps_mtm_reg_addr(u32 cpu, u32 reg)
+{
+ struct global_id gid;
+ u32 core, blkid;
+
+ gid.value = cpu;
+ core = gid.core;
+ blkid = (((core & 0x0C) << 2) | (core & 0x03));
+
+ return nps_host_reg(cpu, blkid, reg);
+}
+
+#ifdef CONFIG_EZNPS_MTM_EXT
+#define NPS_CPU_TO_THREAD_NUM(cpu) \
+ ({ struct global_id gid; gid.value = cpu; gid.thread; })
+
+/* MTM registers */
+#define MTM_CFG(cpu) nps_mtm_reg_addr(cpu, 0x81)
+#define MTM_THR_INIT(cpu) nps_mtm_reg_addr(cpu, 0x92)
+#define MTM_THR_INIT_STS(cpu) nps_mtm_reg_addr(cpu, 0x93)
+
+#define get_thread(map) map.thread
+#define eznps_max_cpus 4096
+#define eznps_cpus_per_cluster 256
+
+void mtm_enable_core(unsigned int cpu);
+int mtm_enable_thread(int cpu);
+#else /* !CONFIG_EZNPS_MTM_EXT */
+
+#define get_thread(map) 0
+#define eznps_max_cpus 256
+#define eznps_cpus_per_cluster 16
+#define mtm_enable_core(cpu)
+#define mtm_enable_thread(cpu) 1
+#define NPS_CPU_TO_THREAD_NUM(cpu) 0
+
+#endif /* CONFIG_EZNPS_MTM_EXT */
+
+#endif /* _PLAT_EZNPS_MTM_H */
diff --git a/arch/arc/plat-eznps/include/plat/smp.h b/arch/arc/plat-eznps/include/plat/smp.h
new file mode 100644
index 0000000..06b59bd
--- /dev/null
+++ b/arch/arc/plat-eznps/include/plat/smp.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#ifndef __PLAT_EZNPS_SMP_H
+#define __PLAT_EZNPS_SMP_H
+
+#ifdef CONFIG_SMP
+
+extern void res_service(void);
+
+#endif /* CONFIG_SMP */
+
+#endif
diff --git a/arch/arc/plat-eznps/mtm.c b/arch/arc/plat-eznps/mtm.c
new file mode 100644
index 0000000..aaaaffd
--- /dev/null
+++ b/arch/arc/plat-eznps/mtm.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/log2.h>
+#include <asm/arcregs.h>
+#include <plat/mtm.h>
+#include <plat/smp.h>
+
+#define MT_CTRL_HS_CNT 0xFF
+#define MT_CTRL_ST_CNT 0xF
+#define NPS_NUM_HW_THREADS 0x10
+
+static void mtm_init_nat(int cpu)
+{
+ struct nps_host_reg_mtm_cfg mtm_cfg;
+ struct nps_host_reg_aux_udmc udmc;
+ int log_nat, nat = 0, i, t;
+
+ /* Iterate core threads and update nat */
+ for (i = 0, t = cpu; i < NPS_NUM_HW_THREADS; i++, t++)
+ nat += test_bit(t, cpumask_bits(cpu_possible_mask));
+
+ log_nat = ilog2(nat);
+
+ udmc.value = read_aux_reg(CTOP_AUX_UDMC);
+ udmc.nat = log_nat;
+ write_aux_reg(CTOP_AUX_UDMC, udmc.value);
+
+ mtm_cfg.value = ioread32be(MTM_CFG(cpu));
+ mtm_cfg.nat = log_nat;
+ iowrite32be(mtm_cfg.value, MTM_CFG(cpu));
+}
+
+static void mtm_init_thread(int cpu)
+{
+ int i, tries = 5;
+ struct nps_host_reg_thr_init thr_init;
+ struct nps_host_reg_thr_init_sts thr_init_sts;
+
+ /* Set thread init register */
+ thr_init.value = 0;
+ iowrite32be(thr_init.value, MTM_THR_INIT(cpu));
+ thr_init.thr_id = NPS_CPU_TO_THREAD_NUM(cpu);
+ thr_init.str = 1;
+ iowrite32be(thr_init.value, MTM_THR_INIT(cpu));
+
+ /* Poll till thread init is done */
+ for (i = 0; i < tries; i++) {
+ thr_init_sts.value = ioread32be(MTM_THR_INIT_STS(cpu));
+ if (thr_init_sts.thr_id == thr_init.thr_id) {
+ if (thr_init_sts.bsy)
+ continue;
+ else if (thr_init_sts.err)
+ pr_warn("Failed to thread init cpu %u\n", cpu);
+ break;
+ }
+
+ pr_warn("Wrong thread id in thread init for cpu %u\n", cpu);
+ break;
+ }
+
+ if (i == tries)
+ pr_warn("Got thread init timeout for cpu %u\n", cpu);
+}
+
+int mtm_enable_thread(int cpu)
+{
+ struct nps_host_reg_mtm_cfg mtm_cfg;
+
+ if (NPS_CPU_TO_THREAD_NUM(cpu) == 0)
+ return 1;
+
+ /* Enable thread in mtm */
+ mtm_cfg.value = ioread32be(MTM_CFG(cpu));
+ mtm_cfg.ten |= (1 << (NPS_CPU_TO_THREAD_NUM(cpu)));
+ iowrite32be(mtm_cfg.value, MTM_CFG(cpu));
+
+ return 0;
+}
+
+void mtm_enable_core(unsigned int cpu)
+{
+ int i;
+ struct nps_host_reg_aux_mt_ctrl mt_ctrl;
+ struct nps_host_reg_mtm_cfg mtm_cfg;
+
+ if (NPS_CPU_TO_THREAD_NUM(cpu) != 0)
+ return;
+
+ /* Initialize Number of Active Threads */
+ mtm_init_nat(cpu);
+
+ /* Initialize mtm_cfg */
+ mtm_cfg.value = ioread32be(MTM_CFG(cpu));
+ mtm_cfg.ten = 1;
+ iowrite32be(mtm_cfg.value, MTM_CFG(cpu));
+
+ /* Initialize all other threads in core */
+ for (i = 1; i < NPS_NUM_HW_THREADS; i++)
+ mtm_init_thread(cpu + i);
+
+
+ /* Enable HW schedule, stall counter, mtm */
+ mt_ctrl.value = 0;
+ mt_ctrl.hsen = 1;
+ mt_ctrl.hs_cnt = MT_CTRL_HS_CNT;
+ mt_ctrl.sten = 1;
+ mt_ctrl.st_cnt = MT_CTRL_ST_CNT;
+ mt_ctrl.mten = 1;
+ write_aux_reg(CTOP_AUX_MT_CTRL, mt_ctrl.value);
+
+ /*
+ * HW scheduling mechanism will start working
+ * Only after call to instruction "schd.rw".
+ * cpu_relax() calls "schd.rw" instruction.
+ */
+ cpu_relax();
+}
diff --git a/arch/arc/plat-eznps/platform.c b/arch/arc/plat-eznps/platform.c
new file mode 100644
index 0000000..12efeb6
--- /dev/null
+++ b/arch/arc/plat-eznps/platform.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#include <linux/init.h>
+#include <asm/mach_desc.h>
+
+static const char *eznps_compat[] __initconst = {
+ "ezchip,arc-nps",
+ NULL,
+};
+
+MACHINE_START(NPS, "nps")
+ .dt_compat = eznps_compat,
+MACHINE_END
diff --git a/arch/arc/plat-eznps/smp.c b/arch/arc/plat-eznps/smp.c
new file mode 100644
index 0000000..87849a3
--- /dev/null
+++ b/arch/arc/plat-eznps/smp.c
@@ -0,0 +1,149 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#include <linux/smp.h>
+#include <linux/of_fdt.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <plat/ctop.h>
+#include <plat/smp.h>
+#include <plat/mtm.h>
+
+#define NPS_DEFAULT_MSID 0x34
+#define NPS_MTM_CPU_CFG 0x90
+
+static char smp_cpuinfo_buf[128] = {"Extn [EZNPS-SMP]\t: On\n"};
+
+/* Get cpu map from device tree */
+static int __init eznps_get_map(const char *name, struct cpumask *cpumask)
+{
+ unsigned long dt_root = of_get_flat_dt_root();
+ const char *buf;
+
+ buf = of_get_flat_dt_prop(dt_root, name, NULL);
+ if (!buf)
+ return 1;
+
+ cpulist_parse(buf, cpumask);
+
+ return 0;
+}
+
+/* Update board cpu maps */
+static void __init eznps_init_cpumasks(void)
+{
+ struct cpumask cpumask;
+
+ if (eznps_get_map("present-cpus", &cpumask)) {
+ pr_err("Failed to get present-cpus from dtb");
+ return;
+ }
+ init_cpu_present(&cpumask);
+
+ if (eznps_get_map("possible-cpus", &cpumask)) {
+ pr_err("Failed to get possible-cpus from dtb");
+ return;
+ }
+ init_cpu_possible(&cpumask);
+}
+
+static void eznps_init_core(unsigned int cpu)
+{
+ u32 sync_value;
+ struct nps_host_reg_aux_hw_comply hw_comply;
+ struct nps_host_reg_aux_lpc lpc;
+
+ if (NPS_CPU_TO_THREAD_NUM(cpu) != 0)
+ return;
+
+ hw_comply.value = read_aux_reg(CTOP_AUX_HW_COMPLY);
+ hw_comply.me = 1;
+ hw_comply.le = 1;
+ hw_comply.te = 1;
+ write_aux_reg(CTOP_AUX_HW_COMPLY, hw_comply.value);
+
+ /* Enable MMU clock */
+ lpc.mep = 1;
+ write_aux_reg(CTOP_AUX_LPC, lpc.value);
+
+ /* Boot CPU only */
+ if (!cpu) {
+ /* Write to general purpose register in CRG */
+ sync_value = ioread32be(REG_GEN_PURP_0);
+ sync_value |= NPS_CRG_SYNC_BIT;
+ iowrite32be(sync_value, REG_GEN_PURP_0);
+ }
+}
+
+/*
+ * Master kick starting another CPU
+ */
+static void __init eznps_smp_wakeup_cpu(int cpu, unsigned long pc)
+{
+ struct nps_host_reg_mtm_cpu_cfg cpu_cfg;
+
+ if (mtm_enable_thread(cpu) == 0)
+ return;
+
+ /* set PC, dmsid, and start CPU */
+ cpu_cfg.value = (u32)res_service;
+ cpu_cfg.dmsid = NPS_DEFAULT_MSID;
+ cpu_cfg.cs = 1;
+ iowrite32be(cpu_cfg.value, nps_mtm_reg_addr(cpu, NPS_MTM_CPU_CFG));
+}
+
+static void eznps_ipi_send(int cpu)
+{
+ struct global_id gid;
+ struct {
+ union {
+ struct {
+ u32 num:8, cluster:8, core:8, thread:8;
+ };
+ u32 value;
+ };
+ } ipi;
+
+ gid.value = cpu;
+ ipi.thread = get_thread(gid);
+ ipi.core = gid.core;
+ ipi.cluster = nps_cluster_logic_to_phys(gid.cluster);
+ ipi.num = IPI_IRQ;
+
+ __asm__ __volatile__(
+ " mov r3, %0\n"
+ " .word %1\n"
+ :
+ : "r"(ipi.value), "i"(CTOP_INST_ASRI_0_R3)
+ : "r3");
+}
+
+static void eznps_init_per_cpu(int cpu)
+{
+ smp_ipi_irq_setup(cpu, IPI_IRQ);
+
+ eznps_init_core(cpu);
+ mtm_enable_core(cpu);
+}
+
+struct plat_smp_ops plat_smp_ops = {
+ .info = smp_cpuinfo_buf,
+ .init_early_smp = eznps_init_cpumasks,
+ .cpu_kick = eznps_smp_wakeup_cpu,
+ .ipi_send = eznps_ipi_send,
+ .init_per_cpu = eznps_init_per_cpu,
+};
+
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 12/18] ARC: [plat-eznps] Use dedicated user stack top
2015-12-01 13:02 ` Noam Camus
@ 2015-12-01 13:02 ` Noam Camus
-1 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc; +Cc: linux-kernel, cmetcalf, Noam Camus
From: Noam Camus <noamc@ezchip.com>
NPS use special mapping right below TASK_SIZE.
Hence we need to lower STACK_TOP so that user stack won't
overlap NPS special mapping.
Signed-off-by: Noam Camus <noamc@ezchip.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
---
arch/arc/include/asm/processor.h | 17 +++++++++++++++++
arch/arc/mm/tlb.c | 6 ++++++
2 files changed, 23 insertions(+), 0 deletions(-)
diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h
index 8a77ccd..41142ab 100644
--- a/arch/arc/include/asm/processor.h
+++ b/arch/arc/include/asm/processor.h
@@ -122,7 +122,24 @@ extern unsigned int get_wchan(struct task_struct *p);
#define USER_KERNEL_GUTTER (VMALLOC_START - TASK_SIZE)
+#ifdef CONFIG_ARC_PLAT_EZNPS
+/* NPS architecture defines special window of 129M in user address space for
+ * special memory areas, when accessing this window the MMU do not use TLB.
+ * Instead MMU direct the access to:
+ * 0x57f00000:0x57ffffff -- 1M of closely coupled memory (aka CMEM)
+ * 0x58000000:0x5fffffff -- 16 huge pages, 8M each, with fixed map (aka FMTs)
+ *
+ * CMEM - is the fastest memory we got and its size is 16K.
+ * FMT - is used to map either to internal/external memory.
+ * Internal memory is the second fast memory and its size is 16M
+ * External memory is the biggest memory (16G) and also the slowest.
+ *
+ * STACK_TOP need to be PMD align (21bit) that is why we supply 0x57e00000.
+ */
+#define STACK_TOP 0x57e00000
+#else /* CONFIG_ARC_PLAT_EZNPS */
#define STACK_TOP TASK_SIZE
+#endif /* CONFIG_ARC_PLAT_EZNPS */
#define STACK_TOP_MAX STACK_TOP
/* This decides where the kernel will search for a free chunk of vm
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index 843e1a5..01f85e5 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -820,6 +820,12 @@ void arc_mmu_init(void)
*/
BUILD_BUG_ON(!IS_ALIGNED((CONFIG_ARC_VMALLOC_SIZE << 20), PMD_SIZE));
+ /*
+ * stack top size sanity check,
+ * Can't be done in processor.h due to header include depenedencies
+ */
+ BUILD_BUG_ON(!IS_ALIGNED(STACK_TOP, PMD_SIZE));
+
/* For efficiency sake, kernel is compile time built for a MMU ver
* This must match the hardware it is running on.
* Linux built for MMU V2, if run on MMU V1 will break down because V1
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 12/18] ARC: [plat-eznps] Use dedicated user stack top
@ 2015-12-01 13:02 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:02 UTC (permalink / raw)
To: linux-snps-arc
From: Noam Camus <noamc@ezchip.com>
NPS use special mapping right below TASK_SIZE.
Hence we need to lower STACK_TOP so that user stack won't
overlap NPS special mapping.
Signed-off-by: Noam Camus <noamc at ezchip.com>
Acked-by: Vineet Gupta <vgupta at synopsys.com>
---
arch/arc/include/asm/processor.h | 17 +++++++++++++++++
arch/arc/mm/tlb.c | 6 ++++++
2 files changed, 23 insertions(+), 0 deletions(-)
diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h
index 8a77ccd..41142ab 100644
--- a/arch/arc/include/asm/processor.h
+++ b/arch/arc/include/asm/processor.h
@@ -122,7 +122,24 @@ extern unsigned int get_wchan(struct task_struct *p);
#define USER_KERNEL_GUTTER (VMALLOC_START - TASK_SIZE)
+#ifdef CONFIG_ARC_PLAT_EZNPS
+/* NPS architecture defines special window of 129M in user address space for
+ * special memory areas, when accessing this window the MMU do not use TLB.
+ * Instead MMU direct the access to:
+ * 0x57f00000:0x57ffffff -- 1M of closely coupled memory (aka CMEM)
+ * 0x58000000:0x5fffffff -- 16 huge pages, 8M each, with fixed map (aka FMTs)
+ *
+ * CMEM - is the fastest memory we got and its size is 16K.
+ * FMT - is used to map either to internal/external memory.
+ * Internal memory is the second fast memory and its size is 16M
+ * External memory is the biggest memory (16G) and also the slowest.
+ *
+ * STACK_TOP need to be PMD align (21bit) that is why we supply 0x57e00000.
+ */
+#define STACK_TOP 0x57e00000
+#else /* CONFIG_ARC_PLAT_EZNPS */
#define STACK_TOP TASK_SIZE
+#endif /* CONFIG_ARC_PLAT_EZNPS */
#define STACK_TOP_MAX STACK_TOP
/* This decides where the kernel will search for a free chunk of vm
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index 843e1a5..01f85e5 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -820,6 +820,12 @@ void arc_mmu_init(void)
*/
BUILD_BUG_ON(!IS_ALIGNED((CONFIG_ARC_VMALLOC_SIZE << 20), PMD_SIZE));
+ /*
+ * stack top size sanity check,
+ * Can't be done in processor.h due to header include depenedencies
+ */
+ BUILD_BUG_ON(!IS_ALIGNED(STACK_TOP, PMD_SIZE));
+
/* For efficiency sake, kernel is compile time built for a MMU ver
* This must match the hardware it is running on.
* Linux built for MMU V2, if run on MMU V1 will break down because V1
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 13/18] ARC: [plat-eznps] Use dedicated atomic/bitops/cmpxchg
2015-12-01 13:02 ` Noam Camus
@ 2015-12-01 13:03 ` Noam Camus
-1 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:03 UTC (permalink / raw)
To: linux-snps-arc; +Cc: linux-kernel, cmetcalf, Noam Camus
From: Noam Camus <noamc@ezchip.com>
We need our own implementaions since we lack LLSC support.
Our extended ISA provided with optimized solution for all 32bit
operations we see in these three headers.
Signed-off-by: Noam Camus <noamc@ezchip.com>
---
arch/arc/include/asm/atomic.h | 79 +++++++++++++++++++++++++++++++++++-
arch/arc/include/asm/bitops.h | 54 +++++++++++++++++++++++++
arch/arc/include/asm/cmpxchg.h | 87 +++++++++++++++++++++++++++++++++-------
3 files changed, 202 insertions(+), 18 deletions(-)
diff --git a/arch/arc/include/asm/atomic.h b/arch/arc/include/asm/atomic.h
index 7730d30..a626996 100644
--- a/arch/arc/include/asm/atomic.h
+++ b/arch/arc/include/asm/atomic.h
@@ -17,6 +17,7 @@
#include <asm/barrier.h>
#include <asm/smp.h>
+#ifndef CONFIG_ARC_PLAT_EZNPS
#define atomic_read(v) READ_ONCE((v)->counter)
#ifdef CONFIG_ARC_HAS_LLSC
@@ -180,12 +181,84 @@ ATOMIC_OP(andnot, &= ~, bic)
ATOMIC_OP(or, |=, or)
ATOMIC_OP(xor, ^=, xor)
-#undef ATOMIC_OPS
-#undef ATOMIC_OP_RETURN
-#undef ATOMIC_OP
#undef SCOND_FAIL_RETRY_VAR_DEF
#undef SCOND_FAIL_RETRY_ASM
#undef SCOND_FAIL_RETRY_VARS
+#else /* CONFIG_ARC_PLAT_EZNPS */
+static inline int atomic_read(const atomic_t *v)
+{
+ int temp;
+
+ __asm__ __volatile__(
+ " ld.di %0, [%1]"
+ : "=r"(temp)
+ : "r"(&v->counter)
+ : "memory");
+ return temp;
+}
+
+static inline void atomic_set(atomic_t *v, int i)
+{
+ __asm__ __volatile__(
+ " st.di %0,[%1]"
+ :
+ : "r"(i), "r"(&v->counter)
+ : "memory");
+}
+
+#define ATOMIC_OP(op, c_op, asm_op) \
+static inline void atomic_##op(int i, atomic_t *v) \
+{ \
+ __asm__ __volatile__( \
+ " mov r2, %0\n" \
+ " mov r3, %1\n" \
+ " .word %2\n" \
+ : \
+ : "r"(i), "r"(&v->counter), "i"(asm_op) \
+ : "r2", "r3", "memory"); \
+} \
+
+#define ATOMIC_OP_RETURN(op, c_op, asm_op) \
+static inline int atomic_##op##_return(int i, atomic_t *v) \
+{ \
+ unsigned int temp = i; \
+ \
+ /* Explicit full memory barrier needed before/after */ \
+ smp_mb(); \
+ \
+ __asm__ __volatile__( \
+ " mov r2, %0\n" \
+ " mov r3, %1\n" \
+ " .word %2\n" \
+ " mov %0, r2" \
+ : "+r"(temp) \
+ : "r"(&v->counter), "i"(asm_op) \
+ : "r2", "r3", "memory"); \
+ \
+ smp_mb(); \
+ \
+ temp c_op i; \
+ \
+ return temp; \
+}
+
+#define ATOMIC_OPS(op, c_op, asm_op) \
+ ATOMIC_OP(op, c_op, asm_op) \
+ ATOMIC_OP_RETURN(op, c_op, asm_op)
+
+ATOMIC_OPS(add, +=, CTOP_INST_AADD_DI_R2_R2_R3)
+#define atomic_sub(i, v) atomic_add(-(i), (v))
+#define atomic_sub_return(i, v) atomic_add_return(-(i), (v))
+
+ATOMIC_OP(and, &=, CTOP_INST_AAND_DI_R2_R2_R3)
+#define atomic_andnot(mask, v) atomic_and(~(mask), (v))
+ATOMIC_OP(or, |=, CTOP_INST_AOR_DI_R2_R2_R3)
+ATOMIC_OP(xor, ^=, CTOP_INST_AXOR_DI_R2_R2_R3)
+#endif /* CONFIG_ARC_PLAT_EZNPS */
+
+#undef ATOMIC_OPS
+#undef ATOMIC_OP_RETURN
+#undef ATOMIC_OP
/**
* __atomic_add_unless - add unless the number is a given value
diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h
index 57c1f33..5a29185 100644
--- a/arch/arc/include/asm/bitops.h
+++ b/arch/arc/include/asm/bitops.h
@@ -22,6 +22,7 @@
#include <asm/smp.h>
#endif
+#ifndef CONFIG_ARC_PLAT_EZNPS
#if defined(CONFIG_ARC_HAS_LLSC)
/*
@@ -155,6 +156,53 @@ static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *
}
#endif /* CONFIG_ARC_HAS_LLSC */
+#else /* CONFIG_ARC_PLAT_EZNPS */
+#define BIT_OP(op, c_op, asm_op) \
+static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\
+{ \
+ m += nr >> 5; \
+ \
+ nr = (1UL << (nr & 0x1f)); \
+ if (asm_op == CTOP_INST_AAND_DI_R2_R2_R3) \
+ nr = ~nr; \
+ \
+ __asm__ __volatile__( \
+ " mov r2, %0\n" \
+ " mov r3, %1\n" \
+ " .word %2\n" \
+ : \
+ : "r"(nr), "r"(m), "i"(asm_op) \
+ : "r2", "r3", "memory"); \
+}
+
+#define TEST_N_BIT_OP(op, c_op, asm_op) \
+static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *m)\
+{ \
+ unsigned long old; \
+ \
+ m += nr >> 5; \
+ \
+ nr = old = (1UL << (nr & 0x1f)); \
+ if (asm_op == CTOP_INST_AAND_DI_R2_R2_R3) \
+ old = ~old; \
+ \
+ /* Explicit full memory barrier needed before/after */ \
+ smp_mb(); \
+ \
+ __asm__ __volatile__( \
+ " mov r2, %0\n" \
+ " mov r3, %1\n" \
+ " .word %2\n" \
+ " mov %0, r2" \
+ : "+r"(old) \
+ : "r"(m), "i"(asm_op) \
+ : "r2", "r3", "memory"); \
+ \
+ smp_mb(); \
+ \
+ return (old & nr) != 0; \
+}
+#endif /* CONFIG_ARC_PLAT_EZNPS */
/***************************************
* Non atomic variants
@@ -196,9 +244,15 @@ static inline int __test_and_##op##_bit(unsigned long nr, volatile unsigned long
/* __test_and_set_bit(), __test_and_clear_bit(), __test_and_change_bit() */\
__TEST_N_BIT_OP(op, c_op, asm_op)
+#ifndef CONFIG_ARC_PLAT_EZNPS
BIT_OPS(set, |, bset)
BIT_OPS(clear, & ~, bclr)
BIT_OPS(change, ^, bxor)
+#else
+BIT_OPS(set, |, CTOP_INST_AOR_DI_R2_R2_R3)
+BIT_OPS(clear, & ~, CTOP_INST_AAND_DI_R2_R2_R3)
+BIT_OPS(change, ^, CTOP_INST_AXOR_DI_R2_R2_R3)
+#endif
/*
* This routine doesn't need to be atomic.
diff --git a/arch/arc/include/asm/cmpxchg.h b/arch/arc/include/asm/cmpxchg.h
index af7a2db..6d320d3 100644
--- a/arch/arc/include/asm/cmpxchg.h
+++ b/arch/arc/include/asm/cmpxchg.h
@@ -14,6 +14,7 @@
#include <asm/barrier.h>
#include <asm/smp.h>
+#ifndef CONFIG_ARC_PLAT_EZNPS
#ifdef CONFIG_ARC_HAS_LLSC
static inline unsigned long
@@ -66,21 +67,6 @@ __cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
#endif /* CONFIG_ARC_HAS_LLSC */
-#define cmpxchg(ptr, o, n) ((typeof(*(ptr)))__cmpxchg((ptr), \
- (unsigned long)(o), (unsigned long)(n)))
-
-/*
- * Since not supported natively, ARC cmpxchg() uses atomic_ops_lock (UP/SMP)
- * just to gaurantee semantics.
- * atomic_cmpxchg() needs to use the same locks as it's other atomic siblings
- * which also happens to be atomic_ops_lock.
- *
- * Thus despite semantically being different, implementation of atomic_cmpxchg()
- * is same as cmpxchg().
- */
-#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
-
-
/*
* xchg (reg with memory) based on "Native atomic" EX insn
*/
@@ -143,6 +129,63 @@ static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
#endif
+#else /* CONFIG_ARC_PLAT_EZNPS */
+static inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
+{
+ /*
+ * Explicit full memory barrier needed before/after
+ */
+ smp_mb();
+
+ write_aux_reg(CTOP_AUX_GPA1, expected);
+
+ __asm__ __volatile__(
+ " mov r2, %0\n"
+ " mov r3, %1\n"
+ " .word %2\n"
+ " mov %0, r2"
+ : "+r"(new)
+ : "r"(ptr), "i"(CTOP_INST_EXC_DI_R2_R2_R3)
+ : "r2", "r3", "memory");
+
+ smp_mb();
+
+ return new;
+}
+
+static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
+ int size)
+{
+ extern unsigned long __xchg_bad_pointer(void);
+
+ switch (size) {
+ case 4:
+ /*
+ * Explicit full memory barrier needed before/after
+ */
+ smp_mb();
+
+ __asm__ __volatile__(
+ " mov r2, %0\n"
+ " mov r3, %1\n"
+ " .word %2\n"
+ " mov %0, r2\n"
+ : "+r"(val)
+ : "r"(ptr), "i"(CTOP_INST_XEX_DI_R2_R2_R3)
+ : "r2", "r3", "memory");
+
+ smp_mb();
+
+ return val;
+ }
+ return __xchg_bad_pointer();
+}
+
+#define xchg(ptr, with) ((typeof(*(ptr)))__xchg((unsigned long)(with), (ptr), \
+ sizeof(*(ptr))))
+#endif /* CONFIG_ARC_PLAT_EZNPS */
+
/*
* "atomic" variant of xchg()
* REQ: It needs to follow the same serialization rules as other atomic_xxx()
@@ -158,4 +201,18 @@ static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
*/
#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+#define cmpxchg(ptr, o, n) ((typeof(*(ptr)))__cmpxchg((ptr), \
+ (unsigned long)(o), (unsigned long)(n)))
+
+/*
+ * Since not supported natively, ARC cmpxchg() uses atomic_ops_lock (UP/SMP)
+ * just to gaurantee semantics.
+ * atomic_cmpxchg() needs to use the same locks as it's other atomic siblings
+ * which also happens to be atomic_ops_lock.
+ *
+ * Thus despite semantically being different, implementation of atomic_cmpxchg()
+ * is same as cmpxchg().
+ */
+#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
+
#endif
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 13/18] ARC: [plat-eznps] Use dedicated atomic/bitops/cmpxchg
@ 2015-12-01 13:03 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:03 UTC (permalink / raw)
To: linux-snps-arc
From: Noam Camus <noamc@ezchip.com>
We need our own implementaions since we lack LLSC support.
Our extended ISA provided with optimized solution for all 32bit
operations we see in these three headers.
Signed-off-by: Noam Camus <noamc at ezchip.com>
---
arch/arc/include/asm/atomic.h | 79 +++++++++++++++++++++++++++++++++++-
arch/arc/include/asm/bitops.h | 54 +++++++++++++++++++++++++
arch/arc/include/asm/cmpxchg.h | 87 +++++++++++++++++++++++++++++++++-------
3 files changed, 202 insertions(+), 18 deletions(-)
diff --git a/arch/arc/include/asm/atomic.h b/arch/arc/include/asm/atomic.h
index 7730d30..a626996 100644
--- a/arch/arc/include/asm/atomic.h
+++ b/arch/arc/include/asm/atomic.h
@@ -17,6 +17,7 @@
#include <asm/barrier.h>
#include <asm/smp.h>
+#ifndef CONFIG_ARC_PLAT_EZNPS
#define atomic_read(v) READ_ONCE((v)->counter)
#ifdef CONFIG_ARC_HAS_LLSC
@@ -180,12 +181,84 @@ ATOMIC_OP(andnot, &= ~, bic)
ATOMIC_OP(or, |=, or)
ATOMIC_OP(xor, ^=, xor)
-#undef ATOMIC_OPS
-#undef ATOMIC_OP_RETURN
-#undef ATOMIC_OP
#undef SCOND_FAIL_RETRY_VAR_DEF
#undef SCOND_FAIL_RETRY_ASM
#undef SCOND_FAIL_RETRY_VARS
+#else /* CONFIG_ARC_PLAT_EZNPS */
+static inline int atomic_read(const atomic_t *v)
+{
+ int temp;
+
+ __asm__ __volatile__(
+ " ld.di %0, [%1]"
+ : "=r"(temp)
+ : "r"(&v->counter)
+ : "memory");
+ return temp;
+}
+
+static inline void atomic_set(atomic_t *v, int i)
+{
+ __asm__ __volatile__(
+ " st.di %0,[%1]"
+ :
+ : "r"(i), "r"(&v->counter)
+ : "memory");
+}
+
+#define ATOMIC_OP(op, c_op, asm_op) \
+static inline void atomic_##op(int i, atomic_t *v) \
+{ \
+ __asm__ __volatile__( \
+ " mov r2, %0\n" \
+ " mov r3, %1\n" \
+ " .word %2\n" \
+ : \
+ : "r"(i), "r"(&v->counter), "i"(asm_op) \
+ : "r2", "r3", "memory"); \
+} \
+
+#define ATOMIC_OP_RETURN(op, c_op, asm_op) \
+static inline int atomic_##op##_return(int i, atomic_t *v) \
+{ \
+ unsigned int temp = i; \
+ \
+ /* Explicit full memory barrier needed before/after */ \
+ smp_mb(); \
+ \
+ __asm__ __volatile__( \
+ " mov r2, %0\n" \
+ " mov r3, %1\n" \
+ " .word %2\n" \
+ " mov %0, r2" \
+ : "+r"(temp) \
+ : "r"(&v->counter), "i"(asm_op) \
+ : "r2", "r3", "memory"); \
+ \
+ smp_mb(); \
+ \
+ temp c_op i; \
+ \
+ return temp; \
+}
+
+#define ATOMIC_OPS(op, c_op, asm_op) \
+ ATOMIC_OP(op, c_op, asm_op) \
+ ATOMIC_OP_RETURN(op, c_op, asm_op)
+
+ATOMIC_OPS(add, +=, CTOP_INST_AADD_DI_R2_R2_R3)
+#define atomic_sub(i, v) atomic_add(-(i), (v))
+#define atomic_sub_return(i, v) atomic_add_return(-(i), (v))
+
+ATOMIC_OP(and, &=, CTOP_INST_AAND_DI_R2_R2_R3)
+#define atomic_andnot(mask, v) atomic_and(~(mask), (v))
+ATOMIC_OP(or, |=, CTOP_INST_AOR_DI_R2_R2_R3)
+ATOMIC_OP(xor, ^=, CTOP_INST_AXOR_DI_R2_R2_R3)
+#endif /* CONFIG_ARC_PLAT_EZNPS */
+
+#undef ATOMIC_OPS
+#undef ATOMIC_OP_RETURN
+#undef ATOMIC_OP
/**
* __atomic_add_unless - add unless the number is a given value
diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h
index 57c1f33..5a29185 100644
--- a/arch/arc/include/asm/bitops.h
+++ b/arch/arc/include/asm/bitops.h
@@ -22,6 +22,7 @@
#include <asm/smp.h>
#endif
+#ifndef CONFIG_ARC_PLAT_EZNPS
#if defined(CONFIG_ARC_HAS_LLSC)
/*
@@ -155,6 +156,53 @@ static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *
}
#endif /* CONFIG_ARC_HAS_LLSC */
+#else /* CONFIG_ARC_PLAT_EZNPS */
+#define BIT_OP(op, c_op, asm_op) \
+static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\
+{ \
+ m += nr >> 5; \
+ \
+ nr = (1UL << (nr & 0x1f)); \
+ if (asm_op == CTOP_INST_AAND_DI_R2_R2_R3) \
+ nr = ~nr; \
+ \
+ __asm__ __volatile__( \
+ " mov r2, %0\n" \
+ " mov r3, %1\n" \
+ " .word %2\n" \
+ : \
+ : "r"(nr), "r"(m), "i"(asm_op) \
+ : "r2", "r3", "memory"); \
+}
+
+#define TEST_N_BIT_OP(op, c_op, asm_op) \
+static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *m)\
+{ \
+ unsigned long old; \
+ \
+ m += nr >> 5; \
+ \
+ nr = old = (1UL << (nr & 0x1f)); \
+ if (asm_op == CTOP_INST_AAND_DI_R2_R2_R3) \
+ old = ~old; \
+ \
+ /* Explicit full memory barrier needed before/after */ \
+ smp_mb(); \
+ \
+ __asm__ __volatile__( \
+ " mov r2, %0\n" \
+ " mov r3, %1\n" \
+ " .word %2\n" \
+ " mov %0, r2" \
+ : "+r"(old) \
+ : "r"(m), "i"(asm_op) \
+ : "r2", "r3", "memory"); \
+ \
+ smp_mb(); \
+ \
+ return (old & nr) != 0; \
+}
+#endif /* CONFIG_ARC_PLAT_EZNPS */
/***************************************
* Non atomic variants
@@ -196,9 +244,15 @@ static inline int __test_and_##op##_bit(unsigned long nr, volatile unsigned long
/* __test_and_set_bit(), __test_and_clear_bit(), __test_and_change_bit() */\
__TEST_N_BIT_OP(op, c_op, asm_op)
+#ifndef CONFIG_ARC_PLAT_EZNPS
BIT_OPS(set, |, bset)
BIT_OPS(clear, & ~, bclr)
BIT_OPS(change, ^, bxor)
+#else
+BIT_OPS(set, |, CTOP_INST_AOR_DI_R2_R2_R3)
+BIT_OPS(clear, & ~, CTOP_INST_AAND_DI_R2_R2_R3)
+BIT_OPS(change, ^, CTOP_INST_AXOR_DI_R2_R2_R3)
+#endif
/*
* This routine doesn't need to be atomic.
diff --git a/arch/arc/include/asm/cmpxchg.h b/arch/arc/include/asm/cmpxchg.h
index af7a2db..6d320d3 100644
--- a/arch/arc/include/asm/cmpxchg.h
+++ b/arch/arc/include/asm/cmpxchg.h
@@ -14,6 +14,7 @@
#include <asm/barrier.h>
#include <asm/smp.h>
+#ifndef CONFIG_ARC_PLAT_EZNPS
#ifdef CONFIG_ARC_HAS_LLSC
static inline unsigned long
@@ -66,21 +67,6 @@ __cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
#endif /* CONFIG_ARC_HAS_LLSC */
-#define cmpxchg(ptr, o, n) ((typeof(*(ptr)))__cmpxchg((ptr), \
- (unsigned long)(o), (unsigned long)(n)))
-
-/*
- * Since not supported natively, ARC cmpxchg() uses atomic_ops_lock (UP/SMP)
- * just to gaurantee semantics.
- * atomic_cmpxchg() needs to use the same locks as it's other atomic siblings
- * which also happens to be atomic_ops_lock.
- *
- * Thus despite semantically being different, implementation of atomic_cmpxchg()
- * is same as cmpxchg().
- */
-#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
-
-
/*
* xchg (reg with memory) based on "Native atomic" EX insn
*/
@@ -143,6 +129,63 @@ static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
#endif
+#else /* CONFIG_ARC_PLAT_EZNPS */
+static inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
+{
+ /*
+ * Explicit full memory barrier needed before/after
+ */
+ smp_mb();
+
+ write_aux_reg(CTOP_AUX_GPA1, expected);
+
+ __asm__ __volatile__(
+ " mov r2, %0\n"
+ " mov r3, %1\n"
+ " .word %2\n"
+ " mov %0, r2"
+ : "+r"(new)
+ : "r"(ptr), "i"(CTOP_INST_EXC_DI_R2_R2_R3)
+ : "r2", "r3", "memory");
+
+ smp_mb();
+
+ return new;
+}
+
+static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
+ int size)
+{
+ extern unsigned long __xchg_bad_pointer(void);
+
+ switch (size) {
+ case 4:
+ /*
+ * Explicit full memory barrier needed before/after
+ */
+ smp_mb();
+
+ __asm__ __volatile__(
+ " mov r2, %0\n"
+ " mov r3, %1\n"
+ " .word %2\n"
+ " mov %0, r2\n"
+ : "+r"(val)
+ : "r"(ptr), "i"(CTOP_INST_XEX_DI_R2_R2_R3)
+ : "r2", "r3", "memory");
+
+ smp_mb();
+
+ return val;
+ }
+ return __xchg_bad_pointer();
+}
+
+#define xchg(ptr, with) ((typeof(*(ptr)))__xchg((unsigned long)(with), (ptr), \
+ sizeof(*(ptr))))
+#endif /* CONFIG_ARC_PLAT_EZNPS */
+
/*
* "atomic" variant of xchg()
* REQ: It needs to follow the same serialization rules as other atomic_xxx()
@@ -158,4 +201,18 @@ static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
*/
#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+#define cmpxchg(ptr, o, n) ((typeof(*(ptr)))__cmpxchg((ptr), \
+ (unsigned long)(o), (unsigned long)(n)))
+
+/*
+ * Since not supported natively, ARC cmpxchg() uses atomic_ops_lock (UP/SMP)
+ * just to gaurantee semantics.
+ * atomic_cmpxchg() needs to use the same locks as it's other atomic siblings
+ * which also happens to be atomic_ops_lock.
+ *
+ * Thus despite semantically being different, implementation of atomic_cmpxchg()
+ * is same as cmpxchg().
+ */
+#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
+
#endif
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 14/18] ARC: [plat-eznps] Use dedicated SMP barriers
2015-12-01 13:02 ` Noam Camus
@ 2015-12-01 13:03 ` Noam Camus
-1 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:03 UTC (permalink / raw)
To: linux-snps-arc; +Cc: linux-kernel, cmetcalf, Noam Camus, Peter Zijlstra
From: Noam Camus <noamc@ezchip.com>
NPS device got 256 cores and each got 16 HW threads (SMT).
We use EZchip dedicated ISA to trigger HW scheduler of the
core that current HW thread belongs to.
This scheduling makes sure that data beyond barrier is available
to all HW threads in core and by that to all in device (4K).
Signed-off-by: Noam Camus <noamc@ezchip.com>
Cc: Peter Zijlstra <peterz@infradead.org>
---
arch/arc/include/asm/barrier.h | 8 ++++++++
1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/arch/arc/include/asm/barrier.h b/arch/arc/include/asm/barrier.h
index a720998..a559732 100644
--- a/arch/arc/include/asm/barrier.h
+++ b/arch/arc/include/asm/barrier.h
@@ -34,6 +34,7 @@
#ifdef CONFIG_ISA_ARCOMPACT
+#ifndef CONFIG_ARC_PLAT_EZNPS
/*
* ARCompact based cores (ARC700) only have SYNC instruction which is super
* heavy weight as it flushes the pipeline as well.
@@ -41,6 +42,13 @@
*/
#define mb() asm volatile("sync\n" : : : "memory")
+#else /* CONFIG_ARC_PLAT_EZNPS */
+
+#include <plat/ctop.h>
+#define mb() asm volatile (".word %0" : : "i"(CTOP_INST_SCHD_RW) : "memory")
+#define rmb() asm volatile (".word %0" : : "i"(CTOP_INST_SCHD_RD) : "memory")
+#endif /* CONFIG_ARC_PLAT_EZNPS */
+
#endif
#include <asm-generic/barrier.h>
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 14/18] ARC: [plat-eznps] Use dedicated SMP barriers
@ 2015-12-01 13:03 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:03 UTC (permalink / raw)
To: linux-snps-arc
From: Noam Camus <noamc@ezchip.com>
NPS device got 256 cores and each got 16 HW threads (SMT).
We use EZchip dedicated ISA to trigger HW scheduler of the
core that current HW thread belongs to.
This scheduling makes sure that data beyond barrier is available
to all HW threads in core and by that to all in device (4K).
Signed-off-by: Noam Camus <noamc at ezchip.com>
Cc: Peter Zijlstra <peterz at infradead.org>
---
arch/arc/include/asm/barrier.h | 8 ++++++++
1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/arch/arc/include/asm/barrier.h b/arch/arc/include/asm/barrier.h
index a720998..a559732 100644
--- a/arch/arc/include/asm/barrier.h
+++ b/arch/arc/include/asm/barrier.h
@@ -34,6 +34,7 @@
#ifdef CONFIG_ISA_ARCOMPACT
+#ifndef CONFIG_ARC_PLAT_EZNPS
/*
* ARCompact based cores (ARC700) only have SYNC instruction which is super
* heavy weight as it flushes the pipeline as well.
@@ -41,6 +42,13 @@
*/
#define mb() asm volatile("sync\n" : : : "memory")
+#else /* CONFIG_ARC_PLAT_EZNPS */
+
+#include <plat/ctop.h>
+#define mb() asm volatile (".word %0" : : "i"(CTOP_INST_SCHD_RW) : "memory")
+#define rmb() asm volatile (".word %0" : : "i"(CTOP_INST_SCHD_RD) : "memory")
+#endif /* CONFIG_ARC_PLAT_EZNPS */
+
#endif
#include <asm-generic/barrier.h>
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 15/18] ARC: [plat-eznps] Use dedicated identity auxiliary register.
2015-12-01 13:02 ` Noam Camus
@ 2015-12-01 13:03 ` Noam Camus
-1 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:03 UTC (permalink / raw)
To: linux-snps-arc; +Cc: linux-kernel, cmetcalf, Noam Camus
From: Noam Camus <noamc@ezchip.com>
With generic "identity" num of CPUs is limited to 256 (8 bit).
We use our alternative AUX register GLOBAL_ID (12 bit).
Now we can support up to 4096 CPUs.
Signed-off-by: Noam Camus <noamc@ezchip.com>
---
arch/arc/include/asm/entry-compact.h | 8 ++++++++
arch/arc/kernel/ctx_sw.c | 13 +++++++++++++
2 files changed, 21 insertions(+), 0 deletions(-)
diff --git a/arch/arc/include/asm/entry-compact.h b/arch/arc/include/asm/entry-compact.h
index 1aff3be..bf9a6a1 100644
--- a/arch/arc/include/asm/entry-compact.h
+++ b/arch/arc/include/asm/entry-compact.h
@@ -35,6 +35,7 @@
#include <asm/asm-offsets.h>
#include <asm/irqflags-compact.h>
#include <asm/thread_info.h> /* For THREAD_SIZE */
+#include <plat/ctop.h>
/*--------------------------------------------------------------
* Switch to Kernel Mode stack if SP points to User Mode stack
@@ -298,9 +299,16 @@
/* Get CPU-ID of this core */
.macro GET_CPU_ID reg
+#ifdef CONFIG_ARC_PLAT_EZNPS
+ lr \reg, [CTOP_AUX_LOGIC_GLOBAL_ID]
+#ifndef CONFIG_EZNPS_MTM_EXT
+ lsr \reg, \reg, 4
+#endif
+#else
lr \reg, [identity]
lsr \reg, \reg, 8
bmsk \reg, \reg, 7
+#endif
.endm
#endif /* __ASM_ARC_ENTRY_COMPACT_H */
diff --git a/arch/arc/kernel/ctx_sw.c b/arch/arc/kernel/ctx_sw.c
index 5d446df..6f4cb0d 100644
--- a/arch/arc/kernel/ctx_sw.c
+++ b/arch/arc/kernel/ctx_sw.c
@@ -16,6 +16,9 @@
#include <asm/asm-offsets.h>
#include <linux/sched.h>
+#ifdef CONFIG_ARC_PLAT_EZNPS
+#include <plat/ctop.h>
+#endif
#define KSP_WORD_OFF ((TASK_THREAD + THREAD_KSP) / 4)
@@ -67,9 +70,16 @@ __switch_to(struct task_struct *prev_task, struct task_struct *next_task)
#ifndef CONFIG_SMP
"st %2, [@_current_task] \n\t"
#else
+#ifdef CONFIG_ARC_PLAT_EZNPS
+ "lr r24, [%4] \n\t"
+#ifndef CONFIG_EZNPS_MTM_EXT
+ "lsr r24, r24, 4 \n\t"
+#endif
+#else
"lr r24, [identity] \n\t"
"lsr r24, r24, 8 \n\t"
"bmsk r24, r24, 7 \n\t"
+#endif
"add2 r24, @_current_task, r24 \n\t"
"st %2, [r24] \n\t"
#endif
@@ -107,6 +117,9 @@ __switch_to(struct task_struct *prev_task, struct task_struct *next_task)
: "=r"(tmp)
: "n"(KSP_WORD_OFF), "r"(next), "r"(prev)
+#ifdef CONFIG_ARC_PLAT_EZNPS
+ , "i"(CTOP_AUX_LOGIC_GLOBAL_ID)
+#endif
: "blink"
);
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 15/18] ARC: [plat-eznps] Use dedicated identity auxiliary register.
@ 2015-12-01 13:03 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:03 UTC (permalink / raw)
To: linux-snps-arc
From: Noam Camus <noamc@ezchip.com>
With generic "identity" num of CPUs is limited to 256 (8 bit).
We use our alternative AUX register GLOBAL_ID (12 bit).
Now we can support up to 4096 CPUs.
Signed-off-by: Noam Camus <noamc at ezchip.com>
---
arch/arc/include/asm/entry-compact.h | 8 ++++++++
arch/arc/kernel/ctx_sw.c | 13 +++++++++++++
2 files changed, 21 insertions(+), 0 deletions(-)
diff --git a/arch/arc/include/asm/entry-compact.h b/arch/arc/include/asm/entry-compact.h
index 1aff3be..bf9a6a1 100644
--- a/arch/arc/include/asm/entry-compact.h
+++ b/arch/arc/include/asm/entry-compact.h
@@ -35,6 +35,7 @@
#include <asm/asm-offsets.h>
#include <asm/irqflags-compact.h>
#include <asm/thread_info.h> /* For THREAD_SIZE */
+#include <plat/ctop.h>
/*--------------------------------------------------------------
* Switch to Kernel Mode stack if SP points to User Mode stack
@@ -298,9 +299,16 @@
/* Get CPU-ID of this core */
.macro GET_CPU_ID reg
+#ifdef CONFIG_ARC_PLAT_EZNPS
+ lr \reg, [CTOP_AUX_LOGIC_GLOBAL_ID]
+#ifndef CONFIG_EZNPS_MTM_EXT
+ lsr \reg, \reg, 4
+#endif
+#else
lr \reg, [identity]
lsr \reg, \reg, 8
bmsk \reg, \reg, 7
+#endif
.endm
#endif /* __ASM_ARC_ENTRY_COMPACT_H */
diff --git a/arch/arc/kernel/ctx_sw.c b/arch/arc/kernel/ctx_sw.c
index 5d446df..6f4cb0d 100644
--- a/arch/arc/kernel/ctx_sw.c
+++ b/arch/arc/kernel/ctx_sw.c
@@ -16,6 +16,9 @@
#include <asm/asm-offsets.h>
#include <linux/sched.h>
+#ifdef CONFIG_ARC_PLAT_EZNPS
+#include <plat/ctop.h>
+#endif
#define KSP_WORD_OFF ((TASK_THREAD + THREAD_KSP) / 4)
@@ -67,9 +70,16 @@ __switch_to(struct task_struct *prev_task, struct task_struct *next_task)
#ifndef CONFIG_SMP
"st %2, [@_current_task] \n\t"
#else
+#ifdef CONFIG_ARC_PLAT_EZNPS
+ "lr r24, [%4] \n\t"
+#ifndef CONFIG_EZNPS_MTM_EXT
+ "lsr r24, r24, 4 \n\t"
+#endif
+#else
"lr r24, [identity] \n\t"
"lsr r24, r24, 8 \n\t"
"bmsk r24, r24, 7 \n\t"
+#endif
"add2 r24, @_current_task, r24 \n\t"
"st %2, [r24] \n\t"
#endif
@@ -107,6 +117,9 @@ __switch_to(struct task_struct *prev_task, struct task_struct *next_task)
: "=r"(tmp)
: "n"(KSP_WORD_OFF), "r"(next), "r"(prev)
+#ifdef CONFIG_ARC_PLAT_EZNPS
+ , "i"(CTOP_AUX_LOGIC_GLOBAL_ID)
+#endif
: "blink"
);
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 16/18] ARC: [plat-eznps] Use dedicated cpu_relax()
2015-12-01 13:02 ` Noam Camus
@ 2015-12-01 13:03 ` Noam Camus
-1 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:03 UTC (permalink / raw)
To: linux-snps-arc
Cc: linux-kernel, cmetcalf, Tal Zilcer, Noam Camus, Peter Zijlstra
From: Tal Zilcer <talz@ezchip.com>
Since the CTOP is SMT hardware multi-threaded, we need to hint
the HW that now will be a very good time to do a hardware
thread context switching. This is done by issuing the schd.rw
instruction (binary coded here so as to not require specific
revision of GCC to build the kernel).
sched.rw means that Thread becomes eligible for execution by
the threads scheduler after all pending read/write
transactions were completed.
Implementing cpu_relax_lowlatency() with barrier()
Since with current semantics of cpu_relax() it may take a
while till yielded CPU will get back.
Signed-off-by: Noam Camus <noamc@ezchip.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
---
arch/arc/include/asm/processor.h | 9 +++++++++
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h
index 41142ab..974b878 100644
--- a/arch/arc/include/asm/processor.h
+++ b/arch/arc/include/asm/processor.h
@@ -57,9 +57,18 @@ struct task_struct;
* A lot of busy-wait loops in SMP are based off of non-volatile data otherwise
* get optimised away by gcc
*/
+#ifndef CONFIG_EZNPS_MTM_EXT
#define cpu_relax() __asm__ __volatile__ ("" : : : "memory")
+#else
+#define cpu_relax() \
+ __asm__ __volatile__ (".word %0" : : "i"(CTOP_INST_SCHD_RW) : "memory")
+#endif
+#ifndef CONFIG_EZNPS_MTM_EXT
#define cpu_relax_lowlatency() cpu_relax()
+#else
+#define cpu_relax_lowlatency() barrier()
+#endif
#define copy_segments(tsk, mm) do { } while (0)
#define release_segments(mm) do { } while (0)
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 16/18] ARC: [plat-eznps] Use dedicated cpu_relax()
@ 2015-12-01 13:03 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:03 UTC (permalink / raw)
To: linux-snps-arc
From: Tal Zilcer <talz@ezchip.com>
Since the CTOP is SMT hardware multi-threaded, we need to hint
the HW that now will be a very good time to do a hardware
thread context switching. This is done by issuing the schd.rw
instruction (binary coded here so as to not require specific
revision of GCC to build the kernel).
sched.rw means that Thread becomes eligible for execution by
the threads scheduler after all pending read/write
transactions were completed.
Implementing cpu_relax_lowlatency() with barrier()
Since with current semantics of cpu_relax() it may take a
while till yielded CPU will get back.
Signed-off-by: Noam Camus <noamc at ezchip.com>
Cc: Peter Zijlstra <peterz at infradead.org>
Acked-by: Vineet Gupta <vgupta at synopsys.com>
---
arch/arc/include/asm/processor.h | 9 +++++++++
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h
index 41142ab..974b878 100644
--- a/arch/arc/include/asm/processor.h
+++ b/arch/arc/include/asm/processor.h
@@ -57,9 +57,18 @@ struct task_struct;
* A lot of busy-wait loops in SMP are based off of non-volatile data otherwise
* get optimised away by gcc
*/
+#ifndef CONFIG_EZNPS_MTM_EXT
#define cpu_relax() __asm__ __volatile__ ("" : : : "memory")
+#else
+#define cpu_relax() \
+ __asm__ __volatile__ (".word %0" : : "i"(CTOP_INST_SCHD_RW) : "memory")
+#endif
+#ifndef CONFIG_EZNPS_MTM_EXT
#define cpu_relax_lowlatency() cpu_relax()
+#else
+#define cpu_relax_lowlatency() barrier()
+#endif
#define copy_segments(tsk, mm) do { } while (0)
#define release_segments(mm) do { } while (0)
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 17/18] ARC: [plat-eznps] Use dedicated COMMAND_LINE_SIZE
2015-12-01 13:02 ` Noam Camus
@ 2015-12-01 13:03 ` Noam Camus
-1 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:03 UTC (permalink / raw)
To: linux-snps-arc; +Cc: linux-kernel, cmetcalf, Noam Camus
From: Noam Camus <noamc@ezchip.com>
The default 256 bytes sometimes is just not enough.
We usually provide earlycon=... and console=... and ip=...
All this and more may need more room.
Signed-off-by: Noam Camus <noamc@ezchip.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
---
arch/arc/include/asm/setup.h | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/arch/arc/include/asm/setup.h b/arch/arc/include/asm/setup.h
index 3078466..48b37c6 100644
--- a/arch/arc/include/asm/setup.h
+++ b/arch/arc/include/asm/setup.h
@@ -12,7 +12,11 @@
#include <linux/types.h>
#include <uapi/asm/setup.h>
+#ifdef CONFIG_ARC_PLAT_EZNPS
+#define COMMAND_LINE_SIZE 2048
+#else
#define COMMAND_LINE_SIZE 256
+#endif
/*
* Data structure to map a ID to string
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 17/18] ARC: [plat-eznps] Use dedicated COMMAND_LINE_SIZE
@ 2015-12-01 13:03 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:03 UTC (permalink / raw)
To: linux-snps-arc
From: Noam Camus <noamc@ezchip.com>
The default 256 bytes sometimes is just not enough.
We usually provide earlycon=... and console=... and ip=...
All this and more may need more room.
Signed-off-by: Noam Camus <noamc at ezchip.com>
Acked-by: Vineet Gupta <vgupta at synopsys.com>
---
arch/arc/include/asm/setup.h | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/arch/arc/include/asm/setup.h b/arch/arc/include/asm/setup.h
index 3078466..48b37c6 100644
--- a/arch/arc/include/asm/setup.h
+++ b/arch/arc/include/asm/setup.h
@@ -12,7 +12,11 @@
#include <linux/types.h>
#include <uapi/asm/setup.h>
+#ifdef CONFIG_ARC_PLAT_EZNPS
+#define COMMAND_LINE_SIZE 2048
+#else
#define COMMAND_LINE_SIZE 256
+#endif
/*
* Data structure to map a ID to string
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 18/18] ARC: Add eznps platform to Kconfig and Makefile
2015-12-01 13:02 ` Noam Camus
@ 2015-12-01 13:03 ` Noam Camus
-1 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:03 UTC (permalink / raw)
To: linux-snps-arc; +Cc: linux-kernel, cmetcalf, Noam Camus
From: Noam Camus <noamc@ezchip.com>
This commit should be left last since only now eznps platform
is in state which one can actually use.
Signed-off-by: Noam Camus <noamc@ezchip.com>
---
arch/arc/Kconfig | 1 +
arch/arc/Makefile | 5 +++++
2 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 689ccb3..8153b79 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -91,6 +91,7 @@ source "arch/arc/plat-sim/Kconfig"
source "arch/arc/plat-tb10x/Kconfig"
source "arch/arc/plat-axs10x/Kconfig"
#New platform adds here
+source "arch/arc/plat-eznps/Kconfig"
endmenu
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index cf0cf34..1357e48 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -99,6 +99,11 @@ core-y += arch/arc/boot/dts/
core-$(CONFIG_ARC_PLAT_SIM) += arch/arc/plat-sim/
core-$(CONFIG_ARC_PLAT_TB10X) += arch/arc/plat-tb10x/
core-$(CONFIG_ARC_PLAT_AXS10X) += arch/arc/plat-axs10x/
+core-$(CONFIG_ARC_PLAT_EZNPS) += arch/arc/plat-eznps/
+
+ifdef CONFIG_ARC_PLAT_EZNPS
+KBUILD_CPPFLAGS += -I$(srctree)/arch/arc/plat-eznps/include
+endif
drivers-$(CONFIG_OPROFILE) += arch/arc/oprofile/
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 18/18] ARC: Add eznps platform to Kconfig and Makefile
@ 2015-12-01 13:03 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-01 13:03 UTC (permalink / raw)
To: linux-snps-arc
From: Noam Camus <noamc@ezchip.com>
This commit should be left last since only now eznps platform
is in state which one can actually use.
Signed-off-by: Noam Camus <noamc at ezchip.com>
---
arch/arc/Kconfig | 1 +
arch/arc/Makefile | 5 +++++
2 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 689ccb3..8153b79 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -91,6 +91,7 @@ source "arch/arc/plat-sim/Kconfig"
source "arch/arc/plat-tb10x/Kconfig"
source "arch/arc/plat-axs10x/Kconfig"
#New platform adds here
+source "arch/arc/plat-eznps/Kconfig"
endmenu
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index cf0cf34..1357e48 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -99,6 +99,11 @@ core-y += arch/arc/boot/dts/
core-$(CONFIG_ARC_PLAT_SIM) += arch/arc/plat-sim/
core-$(CONFIG_ARC_PLAT_TB10X) += arch/arc/plat-tb10x/
core-$(CONFIG_ARC_PLAT_AXS10X) += arch/arc/plat-axs10x/
+core-$(CONFIG_ARC_PLAT_EZNPS) += arch/arc/plat-eznps/
+
+ifdef CONFIG_ARC_PLAT_EZNPS
+KBUILD_CPPFLAGS += -I$(srctree)/arch/arc/plat-eznps/include
+endif
drivers-$(CONFIG_OPROFILE) += arch/arc/oprofile/
--
1.7.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* Re: [PATCH v3 04/18] irqchip: add nps Internal and external irqchips
2015-12-01 13:02 ` Noam Camus
@ 2015-12-01 13:29 ` Marc Zyngier
-1 siblings, 0 replies; 60+ messages in thread
From: Marc Zyngier @ 2015-12-01 13:29 UTC (permalink / raw)
To: Noam Camus, linux-snps-arc
Cc: linux-kernel, cmetcalf, Thomas Gleixner, Jason Cooper
On 01/12/15 13:02, Noam Camus wrote:
> From: Noam Camus <noamc@ezchip.com>
>
> Adding EZchip NPS400 support.
> NPS internal interrupts are internally handled at
> Multi Thread Manager (MTM) that is signaled for deactivating
> an interrupt.
> External interrupts is handled also at Global Interrupt
> Controller (GIC) e.g. serial and network devices.
>
> Signed-off-by: Noam Camus <noamc@ezchip.com>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> ---
> .../interrupt-controller/ezchip,nps400-ic.txt | 17 ++
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-eznps.c | 213 ++++++++++++++++++++
> 3 files changed, 231 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt
> create mode 100644 drivers/irqchip/irq-eznps.c
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt
> new file mode 100644
> index 0000000..888b2b9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt
> @@ -0,0 +1,17 @@
> +EZchip NPS Interrupt Controller
> +
> +Required properties:
> +
> +- compatible : should be "ezchip,nps400-ic"
> +- interrupt-controller : Identifies the node as an interrupt controller
> +- #interrupt-cells : Specifies the number of cells needed to encode an
> + interrupt source. The value shall be 1.
So you never have to encode the interrupt trigger type? Do you only
support edge or level?
> +
> +
> +Example:
> +
> +intc: interrupt-controller {
> + compatible = "ezchip,nps400-ic";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +};
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index 177f78f..b95b954 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -55,3 +55,4 @@ obj-$(CONFIG_RENESAS_H8S_INTC) += irq-renesas-h8s.o
> obj-$(CONFIG_ARCH_SA1100) += irq-sa11x0.o
> obj-$(CONFIG_INGENIC_IRQ) += irq-ingenic.o
> obj-$(CONFIG_IMX_GPCV2) += irq-imx-gpcv2.o
> +obj-$(CONFIG_ARC_PLAT_EZNPS) += irq-eznps.o
> diff --git a/drivers/irqchip/irq-eznps.c b/drivers/irqchip/irq-eznps.c
> new file mode 100644
> index 0000000..bb8d547
> --- /dev/null
> +++ b/drivers/irqchip/irq-eznps.c
> @@ -0,0 +1,213 @@
> +/*
> + * Copyright(c) 2015 EZchip Technologies.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * The full GNU General Public License is included in this distribution in
> + * the file called "COPYING".
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/irqdomain.h>
> +#include <linux/irqchip.h>
> +#include <asm/irq.h>
> +#include <plat/mtm.h>
> +
> +#define NPS_MSU_EN_CFG 0x80 /* MSU Enable Configuration Register */
> +#define MSU_EN BIT(0) /* MSU block enable */
> +#define IPI_EN BIT(16) /* Enable service of incoming IPI Messages */
> +#define GIM0_EN BIT(17) /* Enable service of incoming GIM 0 messages */
> +#define GIM1_EN BIT(18) /* Enable service of incoming GIM 1 messages */
> +
> +#define NPS_GIM_P_POL 0x110 /* Peripheral interrupts source polarity */
> +#define NPS_GIM_P_SENS 0x114 /* Peripheral interrupts sensitivity */
> +#define GIM_UART BIT(7)
> +#define GIM_LAN_TX (BIT(10) | BIT(25))
> +#define GIM_LAN_RX (BIT(11) | BIT(26))
> +#define GIM_PERIPH_ALL (GIM_UART | GIM_LAN_TX | GIM_LAN_RX)
> +
> +#define NPS_GIM_P_DST10 0x13A /* Peripheral Interrupt Destination (LAN RX) */
> +#define NPS_GIM_P_DST11 0x13B /* Peripheral Interrupt Destination (LAN TX) */
> +#define NPS_GIM_P_DST25 0x149 /* Peripheral Interrupt Destination (LAN RX) */
> +#define NPS_GIM_P_DST26 0x14A /* Peripheral Interrupt Destination (LAN TX) */
> +#define DST_IS BIT(26) /* Interrupt select for line 7 */
> +
> +#define NPS_GIM_P_EN 0x100 /* Peripheral interrupts source enable */
> +#define NPS_GIM_P_BLK 0x118 /* Peripheral interrupts blocking for sources */
Are these the interrupts the peripherals are using? If yes, they really
have nothing to do here...
> +
> +/* Messaging and Scheduling Unit:
> + * Provides message management for a CPU cluster.
> + */
> +static void __init eznps_configure_msu(void)
> +{
> + int cpu;
> + u32 value = MSU_EN | IPI_EN | GIM0_EN | GIM1_EN;
> +
> + /* Enable IPI and GIM messages on all clusters */
> + for (cpu = 0 ; cpu < eznps_max_cpus; cpu += eznps_cpus_per_cluster)
> + iowrite32be(value,
> + nps_host_reg(cpu, NPS_MSU_BLKID, NPS_MSU_EN_CFG));
> +}
> +
> +/* Global Interrupt Manager:
> + * Configures and manages up to 64 interrupts from peripherals,
> + * 16 interrupts from CPUs (virtual interrupts) and ECC interrupts.
> + * Receives the interrupts and transmits them to relevant CPU.
> + */
> +static void __init eznps_configure_gim(void)
> +{
> + u32 reg_addr, reg_val;
> +
> + /* IRQ polarity, low or high level, negative or positive edge */
> + reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_POL);
> + reg_val = ioread32be(reg_addr);
> + reg_val &= ~GIM_PERIPH_ALL;
> + iowrite32be(reg_val, reg_addr);
> +
> + /* IRQ type level or edge */
> + reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_SENS);
> + reg_val = ioread32be(reg_addr);
> + reg_val |= GIM_LAN_TX;
> + iowrite32be(reg_val, reg_addr);
> +
> + /* GIM interrupt select type for debug LAN interrupts (both sides) */
> + reg_val = DST_IS;
> + reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_DST10);
> + iowrite32be(reg_val, reg_addr);
> + reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_DST11);
> + iowrite32be(reg_val, reg_addr);
> + reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_DST25);
> + iowrite32be(reg_val, reg_addr);
> + reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_DST26);
> + iowrite32be(reg_val, reg_addr);
> +
> + /* CTOP IRQ lines should be defined as blocking in GIM */
> + iowrite32be(GIM_PERIPH_ALL,
> + nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_BLK));
> +
> + /* Enable CTOP IRQ lines in GIM */
> + iowrite32be(GIM_PERIPH_ALL,
> + nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_EN));
> +}
> +
> +/*
> + * NPS400 core includes a Interrupt Controller (IC) support.
> + * All cores can deactivate level irqs at first level control
> + * at cores mesh layer called MTM.
> + * For devices out side chip e.g. uart, network there is another
> + * level called Global Interrupt Manager (GIM).
> + * This second level can control level and edge interrupt.
> + *
> + * NOTE: AUX_IENABLE and CTOP_AUX_IACK are auxiliary registers
> + * with private HW copy per CPU.
> + */
> +
> +static void nps400_irq_mask(struct irq_data *data)
> +{
> + unsigned int ienb;
> +
> + ienb = read_aux_reg(AUX_IENABLE);
> + ienb &= ~(1 << data->hwirq);
> + write_aux_reg(AUX_IENABLE, ienb);
> +}
> +
> +static void nps400_irq_unmask(struct irq_data *data)
> +{
> + unsigned int ienb;
> +
> + ienb = read_aux_reg(AUX_IENABLE);
> + ienb |= (1 << data->hwirq);
> + write_aux_reg(AUX_IENABLE, ienb);
> +}
> +
> +static void nps400_irq_eoi_global(struct irq_data *data)
> +{
> + write_aux_reg(CTOP_AUX_IACK, 1 << data->hwirq);
> +
> + /* Don't ack before all device access is done */
> + mb();
> +
> + __asm__ __volatile__ (
> + " .word %0\n"
> + :
> + : "i"(CTOP_INST_RSPI_GIC_0_R12)
> + : "memory");
Silly question: why cannot you just write the actual instruction instead
of shoving the instruction like this? Also, .inst would be more
appropriate...
> +}
> +
> +static void nps400_irq_eoi(struct irq_data *data)
> +{
> + write_aux_reg(CTOP_AUX_IACK, 1 << data->hwirq);
> +}
> +
> +
> +static struct irq_chip nps400_irq_chip_fasteoi = {
> + .name = "NPS400 IC Global",
> + .irq_mask = nps400_irq_mask,
> + .irq_unmask = nps400_irq_unmask,
> + .irq_eoi = nps400_irq_eoi_global,
> +};
> +
> +static struct irq_chip nps400_irq_chip_percpu = {
> + .name = "NPS400 IC",
> + .irq_mask = nps400_irq_mask,
> + .irq_unmask = nps400_irq_unmask,
> + .irq_eoi = nps400_irq_eoi,
> +};
> +
> +static int nps400_irq_map(struct irq_domain *d, unsigned int irq,
> + irq_hw_number_t hw)
> +{
> + switch (irq) {
> + case TIMER0_IRQ:
> +#if defined(CONFIG_SMP)
> + case IPI_IRQ:
> +#endif
> + irq_set_chip_and_handler(irq, &nps400_irq_chip_percpu,
> + handle_percpu_irq);
> + break;
> + default:
> + irq_set_chip_and_handler(irq, &nps400_irq_chip_fasteoi,
> + handle_fasteoi_irq);
> + break;
> + }
No. This is just wrong. Either you get per interrupt information from
the device tree to configure the interrupt the right way, or you have
different interrupt controllers for each device.
But using the Linux irq number is always wrong. You should only consider
the hwirq.
> +
> + return 0;
> +}
> +
> +static const struct irq_domain_ops nps400_irq_ops = {
> + .xlate = irq_domain_xlate_onecell,
> + .map = nps400_irq_map,
> +};
> +
> +static struct irq_domain *nps400_root_domain;
> +
> +static int __init nps400_of_init(struct device_node *node,
> + struct device_node *parent)
> +{
> + if (parent)
> + panic("DeviceTree incore ic not a root irq controller\n");
> +
> + eznps_configure_msu();
> + eznps_configure_gim();
> +
> + nps400_root_domain = irq_domain_add_legacy(node, NR_CPU_IRQS, 0, 0,
> + &nps400_irq_ops, NULL);
And that's why you can get away with the above horror. Don't use legacy
domains. This stuff is by no mean legacy.
> +
> + if (!nps400_root_domain)
> + panic("nps400 root irq domain not avail\n");
> +
> + /* with this we don't need to export nps400_root_domain */
> + irq_set_default_host(nps400_root_domain);
> +
> + return 0;
> +}
> +IRQCHIP_DECLARE(ezchip_nps400_ic, "ezchip,nps400-ic", nps400_of_init);
>
Thanks,
M.
--
Jazz is not dead. It just smells funny...
^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH v3 04/18] irqchip: add nps Internal and external irqchips
@ 2015-12-01 13:29 ` Marc Zyngier
0 siblings, 0 replies; 60+ messages in thread
From: Marc Zyngier @ 2015-12-01 13:29 UTC (permalink / raw)
To: linux-snps-arc
On 01/12/15 13:02, Noam Camus wrote:
> From: Noam Camus <noamc at ezchip.com>
>
> Adding EZchip NPS400 support.
> NPS internal interrupts are internally handled at
> Multi Thread Manager (MTM) that is signaled for deactivating
> an interrupt.
> External interrupts is handled also at Global Interrupt
> Controller (GIC) e.g. serial and network devices.
>
> Signed-off-by: Noam Camus <noamc at ezchip.com>
> Cc: Thomas Gleixner <tglx at linutronix.de>
> Cc: Jason Cooper <jason at lakedaemon.net>
> Cc: Marc Zyngier <marc.zyngier at arm.com>
> ---
> .../interrupt-controller/ezchip,nps400-ic.txt | 17 ++
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-eznps.c | 213 ++++++++++++++++++++
> 3 files changed, 231 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt
> create mode 100644 drivers/irqchip/irq-eznps.c
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt
> new file mode 100644
> index 0000000..888b2b9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt
> @@ -0,0 +1,17 @@
> +EZchip NPS Interrupt Controller
> +
> +Required properties:
> +
> +- compatible : should be "ezchip,nps400-ic"
> +- interrupt-controller : Identifies the node as an interrupt controller
> +- #interrupt-cells : Specifies the number of cells needed to encode an
> + interrupt source. The value shall be 1.
So you never have to encode the interrupt trigger type? Do you only
support edge or level?
> +
> +
> +Example:
> +
> +intc: interrupt-controller {
> + compatible = "ezchip,nps400-ic";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +};
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index 177f78f..b95b954 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -55,3 +55,4 @@ obj-$(CONFIG_RENESAS_H8S_INTC) += irq-renesas-h8s.o
> obj-$(CONFIG_ARCH_SA1100) += irq-sa11x0.o
> obj-$(CONFIG_INGENIC_IRQ) += irq-ingenic.o
> obj-$(CONFIG_IMX_GPCV2) += irq-imx-gpcv2.o
> +obj-$(CONFIG_ARC_PLAT_EZNPS) += irq-eznps.o
> diff --git a/drivers/irqchip/irq-eznps.c b/drivers/irqchip/irq-eznps.c
> new file mode 100644
> index 0000000..bb8d547
> --- /dev/null
> +++ b/drivers/irqchip/irq-eznps.c
> @@ -0,0 +1,213 @@
> +/*
> + * Copyright(c) 2015 EZchip Technologies.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * The full GNU General Public License is included in this distribution in
> + * the file called "COPYING".
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/irqdomain.h>
> +#include <linux/irqchip.h>
> +#include <asm/irq.h>
> +#include <plat/mtm.h>
> +
> +#define NPS_MSU_EN_CFG 0x80 /* MSU Enable Configuration Register */
> +#define MSU_EN BIT(0) /* MSU block enable */
> +#define IPI_EN BIT(16) /* Enable service of incoming IPI Messages */
> +#define GIM0_EN BIT(17) /* Enable service of incoming GIM 0 messages */
> +#define GIM1_EN BIT(18) /* Enable service of incoming GIM 1 messages */
> +
> +#define NPS_GIM_P_POL 0x110 /* Peripheral interrupts source polarity */
> +#define NPS_GIM_P_SENS 0x114 /* Peripheral interrupts sensitivity */
> +#define GIM_UART BIT(7)
> +#define GIM_LAN_TX (BIT(10) | BIT(25))
> +#define GIM_LAN_RX (BIT(11) | BIT(26))
> +#define GIM_PERIPH_ALL (GIM_UART | GIM_LAN_TX | GIM_LAN_RX)
> +
> +#define NPS_GIM_P_DST10 0x13A /* Peripheral Interrupt Destination (LAN RX) */
> +#define NPS_GIM_P_DST11 0x13B /* Peripheral Interrupt Destination (LAN TX) */
> +#define NPS_GIM_P_DST25 0x149 /* Peripheral Interrupt Destination (LAN RX) */
> +#define NPS_GIM_P_DST26 0x14A /* Peripheral Interrupt Destination (LAN TX) */
> +#define DST_IS BIT(26) /* Interrupt select for line 7 */
> +
> +#define NPS_GIM_P_EN 0x100 /* Peripheral interrupts source enable */
> +#define NPS_GIM_P_BLK 0x118 /* Peripheral interrupts blocking for sources */
Are these the interrupts the peripherals are using? If yes, they really
have nothing to do here...
> +
> +/* Messaging and Scheduling Unit:
> + * Provides message management for a CPU cluster.
> + */
> +static void __init eznps_configure_msu(void)
> +{
> + int cpu;
> + u32 value = MSU_EN | IPI_EN | GIM0_EN | GIM1_EN;
> +
> + /* Enable IPI and GIM messages on all clusters */
> + for (cpu = 0 ; cpu < eznps_max_cpus; cpu += eznps_cpus_per_cluster)
> + iowrite32be(value,
> + nps_host_reg(cpu, NPS_MSU_BLKID, NPS_MSU_EN_CFG));
> +}
> +
> +/* Global Interrupt Manager:
> + * Configures and manages up to 64 interrupts from peripherals,
> + * 16 interrupts from CPUs (virtual interrupts) and ECC interrupts.
> + * Receives the interrupts and transmits them to relevant CPU.
> + */
> +static void __init eznps_configure_gim(void)
> +{
> + u32 reg_addr, reg_val;
> +
> + /* IRQ polarity, low or high level, negative or positive edge */
> + reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_POL);
> + reg_val = ioread32be(reg_addr);
> + reg_val &= ~GIM_PERIPH_ALL;
> + iowrite32be(reg_val, reg_addr);
> +
> + /* IRQ type level or edge */
> + reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_SENS);
> + reg_val = ioread32be(reg_addr);
> + reg_val |= GIM_LAN_TX;
> + iowrite32be(reg_val, reg_addr);
> +
> + /* GIM interrupt select type for debug LAN interrupts (both sides) */
> + reg_val = DST_IS;
> + reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_DST10);
> + iowrite32be(reg_val, reg_addr);
> + reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_DST11);
> + iowrite32be(reg_val, reg_addr);
> + reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_DST25);
> + iowrite32be(reg_val, reg_addr);
> + reg_addr = nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_DST26);
> + iowrite32be(reg_val, reg_addr);
> +
> + /* CTOP IRQ lines should be defined as blocking in GIM */
> + iowrite32be(GIM_PERIPH_ALL,
> + nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_BLK));
> +
> + /* Enable CTOP IRQ lines in GIM */
> + iowrite32be(GIM_PERIPH_ALL,
> + nps_host_reg_non_cl(NPS_GIM_BLKID, NPS_GIM_P_EN));
> +}
> +
> +/*
> + * NPS400 core includes a Interrupt Controller (IC) support.
> + * All cores can deactivate level irqs at first level control
> + * at cores mesh layer called MTM.
> + * For devices out side chip e.g. uart, network there is another
> + * level called Global Interrupt Manager (GIM).
> + * This second level can control level and edge interrupt.
> + *
> + * NOTE: AUX_IENABLE and CTOP_AUX_IACK are auxiliary registers
> + * with private HW copy per CPU.
> + */
> +
> +static void nps400_irq_mask(struct irq_data *data)
> +{
> + unsigned int ienb;
> +
> + ienb = read_aux_reg(AUX_IENABLE);
> + ienb &= ~(1 << data->hwirq);
> + write_aux_reg(AUX_IENABLE, ienb);
> +}
> +
> +static void nps400_irq_unmask(struct irq_data *data)
> +{
> + unsigned int ienb;
> +
> + ienb = read_aux_reg(AUX_IENABLE);
> + ienb |= (1 << data->hwirq);
> + write_aux_reg(AUX_IENABLE, ienb);
> +}
> +
> +static void nps400_irq_eoi_global(struct irq_data *data)
> +{
> + write_aux_reg(CTOP_AUX_IACK, 1 << data->hwirq);
> +
> + /* Don't ack before all device access is done */
> + mb();
> +
> + __asm__ __volatile__ (
> + " .word %0\n"
> + :
> + : "i"(CTOP_INST_RSPI_GIC_0_R12)
> + : "memory");
Silly question: why cannot you just write the actual instruction instead
of shoving the instruction like this? Also, .inst would be more
appropriate...
> +}
> +
> +static void nps400_irq_eoi(struct irq_data *data)
> +{
> + write_aux_reg(CTOP_AUX_IACK, 1 << data->hwirq);
> +}
> +
> +
> +static struct irq_chip nps400_irq_chip_fasteoi = {
> + .name = "NPS400 IC Global",
> + .irq_mask = nps400_irq_mask,
> + .irq_unmask = nps400_irq_unmask,
> + .irq_eoi = nps400_irq_eoi_global,
> +};
> +
> +static struct irq_chip nps400_irq_chip_percpu = {
> + .name = "NPS400 IC",
> + .irq_mask = nps400_irq_mask,
> + .irq_unmask = nps400_irq_unmask,
> + .irq_eoi = nps400_irq_eoi,
> +};
> +
> +static int nps400_irq_map(struct irq_domain *d, unsigned int irq,
> + irq_hw_number_t hw)
> +{
> + switch (irq) {
> + case TIMER0_IRQ:
> +#if defined(CONFIG_SMP)
> + case IPI_IRQ:
> +#endif
> + irq_set_chip_and_handler(irq, &nps400_irq_chip_percpu,
> + handle_percpu_irq);
> + break;
> + default:
> + irq_set_chip_and_handler(irq, &nps400_irq_chip_fasteoi,
> + handle_fasteoi_irq);
> + break;
> + }
No. This is just wrong. Either you get per interrupt information from
the device tree to configure the interrupt the right way, or you have
different interrupt controllers for each device.
But using the Linux irq number is always wrong. You should only consider
the hwirq.
> +
> + return 0;
> +}
> +
> +static const struct irq_domain_ops nps400_irq_ops = {
> + .xlate = irq_domain_xlate_onecell,
> + .map = nps400_irq_map,
> +};
> +
> +static struct irq_domain *nps400_root_domain;
> +
> +static int __init nps400_of_init(struct device_node *node,
> + struct device_node *parent)
> +{
> + if (parent)
> + panic("DeviceTree incore ic not a root irq controller\n");
> +
> + eznps_configure_msu();
> + eznps_configure_gim();
> +
> + nps400_root_domain = irq_domain_add_legacy(node, NR_CPU_IRQS, 0, 0,
> + &nps400_irq_ops, NULL);
And that's why you can get away with the above horror. Don't use legacy
domains. This stuff is by no mean legacy.
> +
> + if (!nps400_root_domain)
> + panic("nps400 root irq domain not avail\n");
> +
> + /* with this we don't need to export nps400_root_domain */
> + irq_set_default_host(nps400_root_domain);
> +
> + return 0;
> +}
> +IRQCHIP_DECLARE(ezchip_nps400_ic, "ezchip,nps400-ic", nps400_of_init);
>
Thanks,
M.
--
Jazz is not dead. It just smells funny...
^ permalink raw reply [flat|nested] 60+ messages in thread
* RE: [PATCH v3 04/18] irqchip: add nps Internal and external irqchips
2015-12-01 13:29 ` Marc Zyngier
@ 2015-12-02 15:08 ` Noam Camus
-1 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-02 15:08 UTC (permalink / raw)
To: Marc Zyngier, linux-snps-arc
Cc: linux-kernel, Chris Metcalf, Thomas Gleixner, Jason Cooper
>From: Marc Zyngier [mailto:marc.zyngier@arm.com]
>Sent: Tuesday, December 01, 2015 3:29 PM
> + interrupt source. The value shall be 1.
>So you never have to encode the interrupt trigger type? Do you only support edge or level?
I Always use level sensitive.
> +
> +#define NPS_GIM_P_EN 0x100 /* Peripheral interrupts source enable */
> +#define NPS_GIM_P_BLK 0x118 /* Peripheral interrupts blocking for sources */
>>Are these the interrupts the peripherals are using? If yes, they really have nothing to do here...
I will move this from here
>> + __asm__ __volatile__ (
>> + " .word %0\n"
>> + :
>> + : "i"(CTOP_INST_RSPI_GIC_0_R12)
>> + : "memory");
>Silly question: why cannot you just write the actual instruction instead of shoving the instruction like this? Also, .inst would be more appropriate...
[Noam Camus] Since this is instruction that yet is not part of up-streamed binutils of ARC. Now ARC maintainer can build our kernel with generic ARC toolchain.
>> +static int nps400_irq_map(struct irq_domain *d, unsigned int irq,
>> + irq_hw_number_t hw)
>> +{
>> + switch (irq) {
>> + case TIMER0_IRQ:
>> +#if defined(CONFIG_SMP)
>> + case IPI_IRQ:
>> +#endif
>> + irq_set_chip_and_handler(irq, &nps400_irq_chip_percpu,
>> + handle_percpu_irq);
>> + break;
>> + default:
>> + irq_set_chip_and_handler(irq, &nps400_irq_chip_fasteoi,
>> + handle_fasteoi_irq);
>> + break;
>> + }
>No. This is just wrong. Either you get per interrupt information from the device tree to configure the interrupt the right way, or you have different interrupt controllers for each device.
I am not sure how you want me to get it from DTB? Please refer to some reference.
>But using the Linux irq number is always wrong. You should only consider the hwirq.
I will change
> +
> + nps400_root_domain = irq_domain_add_legacy(node, NR_CPU_IRQS, 0, 0,
> + &nps400_irq_ops, NULL);
>And that's why you can get away with the above horror. Don't use legacy domains. This stuff is by no mean legacy.
So what is my alternative here?
-Noam
^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH v3 04/18] irqchip: add nps Internal and external irqchips
@ 2015-12-02 15:08 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-02 15:08 UTC (permalink / raw)
To: linux-snps-arc
>From: Marc Zyngier [mailto:marc.zyngier at arm.com]
>Sent: Tuesday, December 01, 2015 3:29 PM
> + interrupt source. The value shall be 1.
>So you never have to encode the interrupt trigger type? Do you only support edge or level?
I Always use level sensitive.
> +
> +#define NPS_GIM_P_EN 0x100 /* Peripheral interrupts source enable */
> +#define NPS_GIM_P_BLK 0x118 /* Peripheral interrupts blocking for sources */
>>Are these the interrupts the peripherals are using? If yes, they really have nothing to do here...
I will move this from here
>> + __asm__ __volatile__ (
>> + " .word %0\n"
>> + :
>> + : "i"(CTOP_INST_RSPI_GIC_0_R12)
>> + : "memory");
>Silly question: why cannot you just write the actual instruction instead of shoving the instruction like this? Also, .inst would be more appropriate...
[Noam Camus] Since this is instruction that yet is not part of up-streamed binutils of ARC. Now ARC maintainer can build our kernel with generic ARC toolchain.
>> +static int nps400_irq_map(struct irq_domain *d, unsigned int irq,
>> + irq_hw_number_t hw)
>> +{
>> + switch (irq) {
>> + case TIMER0_IRQ:
>> +#if defined(CONFIG_SMP)
>> + case IPI_IRQ:
>> +#endif
>> + irq_set_chip_and_handler(irq, &nps400_irq_chip_percpu,
>> + handle_percpu_irq);
>> + break;
>> + default:
>> + irq_set_chip_and_handler(irq, &nps400_irq_chip_fasteoi,
>> + handle_fasteoi_irq);
>> + break;
>> + }
>No. This is just wrong. Either you get per interrupt information from the device tree to configure the interrupt the right way, or you have different interrupt controllers for each device.
I am not sure how you want me to get it from DTB? Please refer to some reference.
>But using the Linux irq number is always wrong. You should only consider the hwirq.
I will change
> +
> + nps400_root_domain = irq_domain_add_legacy(node, NR_CPU_IRQS, 0, 0,
> + &nps400_irq_ops, NULL);
>And that's why you can get away with the above horror. Don't use legacy domains. This stuff is by no mean legacy.
So what is my alternative here?
-Noam
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 04/18] irqchip: add nps Internal and external irqchips
2015-12-02 15:08 ` Noam Camus
@ 2015-12-03 18:33 ` Marc Zyngier
-1 siblings, 0 replies; 60+ messages in thread
From: Marc Zyngier @ 2015-12-03 18:33 UTC (permalink / raw)
To: Noam Camus, linux-snps-arc
Cc: linux-kernel, Chris Metcalf, Thomas Gleixner, Jason Cooper
Hi Noam,
On 02/12/15 15:08, Noam Camus wrote:
>> From: Marc Zyngier [mailto:marc.zyngier@arm.com]
>> Sent: Tuesday, December 01, 2015 3:29 PM
>
>> + interrupt source. The value shall be 1.
>
>> So you never have to encode the interrupt trigger type? Do you only support edge or level?
> I Always use level sensitive.
>
>> +
>> +#define NPS_GIM_P_EN 0x100 /* Peripheral interrupts source enable */
>> +#define NPS_GIM_P_BLK 0x118 /* Peripheral interrupts blocking for sources */
>
>>> Are these the interrupts the peripherals are using? If yes, they really have nothing to do here...
> I will move this from here
>>> + __asm__ __volatile__ (
>>> + " .word %0\n"
>>> + :
>>> + : "i"(CTOP_INST_RSPI_GIC_0_R12)
>>> + : "memory");
>
>> Silly question: why cannot you just write the actual instruction
>> instead of shoving the instruction like this? Also, .inst would be
>> more appropriate...
> [Noam Camus] Since this is instruction that yet is not part of
> up-streamed binutils of ARC. Now ARC maintainer can build our kernel
> with generic ARC toolchain.
OK. If you decide to carry on using this, I'd still recommend using
.inst instead of .word, so that you can get a proper disassembly.
>>> +static int nps400_irq_map(struct irq_domain *d, unsigned int irq,
>>> + irq_hw_number_t hw)
>>> +{
>>> + switch (irq) {
>>> + case TIMER0_IRQ:
>>> +#if defined(CONFIG_SMP)
>>> + case IPI_IRQ:
>>> +#endif
>>> + irq_set_chip_and_handler(irq, &nps400_irq_chip_percpu,
>>> + handle_percpu_irq);
>>> + break;
>>> + default:
>>> + irq_set_chip_and_handler(irq, &nps400_irq_chip_fasteoi,
>>> + handle_fasteoi_irq);
>>> + break;
>>> + }
>
>> No. This is just wrong. Either you get per interrupt information
>> from the device tree to configure the interrupt the right way, or
>> you have different interrupt controllers for each device.
> I am not sure how you want me to get it from DTB? Please refer to
> some reference.
Here, you are assuming that 'irq' is a hardware number, while there is
no reason why it should be (it only works because you are using legacy
domains, more on that later).
Your switch/case statement should be based on the 'hw' parameter,
because that is your HW IRQ number. the irq parameter can be completely
random, and will eventually be once you fix the rest of the driver.
Also, can you always tell the per-cpu property of your interrupt based
on its number? If you can, then it is fine.
>> But using the Linux irq number is always wrong. You should only consider the hwirq.
> I will change
>
>> +
>> + nps400_root_domain = irq_domain_add_legacy(node, NR_CPU_IRQS, 0, 0,
>> + &nps400_irq_ops, NULL);
>
>> And that's why you can get away with the above horror. Don't use
>> legacy domains. This stuff is by no mean legacy.
> So what is my alternative here?
Your alternative is to use irq_domain_add_linear, for example, and to
make sure that you always refer to the hw number when manipulating the
HW. You will quickly notice that the Linux IRQ number has nothing to do
with the HW one, and you'll be able to quickly iron out the bugs.
Looking forward to reviewing your next version.
Thanks,
M.
--
Jazz is not dead. It just smells funny...
^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH v3 04/18] irqchip: add nps Internal and external irqchips
@ 2015-12-03 18:33 ` Marc Zyngier
0 siblings, 0 replies; 60+ messages in thread
From: Marc Zyngier @ 2015-12-03 18:33 UTC (permalink / raw)
To: linux-snps-arc
Hi Noam,
On 02/12/15 15:08, Noam Camus wrote:
>> From: Marc Zyngier [mailto:marc.zyngier at arm.com]
>> Sent: Tuesday, December 01, 2015 3:29 PM
>
>> + interrupt source. The value shall be 1.
>
>> So you never have to encode the interrupt trigger type? Do you only support edge or level?
> I Always use level sensitive.
>
>> +
>> +#define NPS_GIM_P_EN 0x100 /* Peripheral interrupts source enable */
>> +#define NPS_GIM_P_BLK 0x118 /* Peripheral interrupts blocking for sources */
>
>>> Are these the interrupts the peripherals are using? If yes, they really have nothing to do here...
> I will move this from here
>>> + __asm__ __volatile__ (
>>> + " .word %0\n"
>>> + :
>>> + : "i"(CTOP_INST_RSPI_GIC_0_R12)
>>> + : "memory");
>
>> Silly question: why cannot you just write the actual instruction
>> instead of shoving the instruction like this? Also, .inst would be
>> more appropriate...
> [Noam Camus] Since this is instruction that yet is not part of
> up-streamed binutils of ARC. Now ARC maintainer can build our kernel
> with generic ARC toolchain.
OK. If you decide to carry on using this, I'd still recommend using
.inst instead of .word, so that you can get a proper disassembly.
>>> +static int nps400_irq_map(struct irq_domain *d, unsigned int irq,
>>> + irq_hw_number_t hw)
>>> +{
>>> + switch (irq) {
>>> + case TIMER0_IRQ:
>>> +#if defined(CONFIG_SMP)
>>> + case IPI_IRQ:
>>> +#endif
>>> + irq_set_chip_and_handler(irq, &nps400_irq_chip_percpu,
>>> + handle_percpu_irq);
>>> + break;
>>> + default:
>>> + irq_set_chip_and_handler(irq, &nps400_irq_chip_fasteoi,
>>> + handle_fasteoi_irq);
>>> + break;
>>> + }
>
>> No. This is just wrong. Either you get per interrupt information
>> from the device tree to configure the interrupt the right way, or
>> you have different interrupt controllers for each device.
> I am not sure how you want me to get it from DTB? Please refer to
> some reference.
Here, you are assuming that 'irq' is a hardware number, while there is
no reason why it should be (it only works because you are using legacy
domains, more on that later).
Your switch/case statement should be based on the 'hw' parameter,
because that is your HW IRQ number. the irq parameter can be completely
random, and will eventually be once you fix the rest of the driver.
Also, can you always tell the per-cpu property of your interrupt based
on its number? If you can, then it is fine.
>> But using the Linux irq number is always wrong. You should only consider the hwirq.
> I will change
>
>> +
>> + nps400_root_domain = irq_domain_add_legacy(node, NR_CPU_IRQS, 0, 0,
>> + &nps400_irq_ops, NULL);
>
>> And that's why you can get away with the above horror. Don't use
>> legacy domains. This stuff is by no mean legacy.
> So what is my alternative here?
Your alternative is to use irq_domain_add_linear, for example, and to
make sure that you always refer to the hw number when manipulating the
HW. You will quickly notice that the Linux IRQ number has nothing to do
with the HW one, and you'll be able to quickly iron out the bugs.
Looking forward to reviewing your next version.
Thanks,
M.
--
Jazz is not dead. It just smells funny...
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 01/18] Documentation: Add EZchip vendor to binding list
2015-12-01 13:02 ` Noam Camus
@ 2015-12-04 8:07 ` Daniel Lezcano
-1 siblings, 0 replies; 60+ messages in thread
From: Daniel Lezcano @ 2015-12-04 8:07 UTC (permalink / raw)
To: Noam Camus, linux-snps-arc; +Cc: linux-kernel, cmetcalf, Pawel Moll
On 12/01/2015 02:02 PM, Noam Camus wrote:
> From: Noam Camus <noamc@ezchip.com>
>
> Add EZchip to vendor prefixes list.
> EZchip introduce the NPS platform for the ARC architecture.
>
> Signed-off-by: Noam Camus <noamc@ezchip.com>
> Acked-by: Rob Herring <robh+dt@kernel.org>
> Cc: Pawel Moll <pawel.moll@arm.com>
> ---
> Documentation/devicetree/bindings/arc/eznps.txt | 7 +++++++
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> 2 files changed, 8 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arc/eznps.txt
>
> diff --git a/Documentation/devicetree/bindings/arc/eznps.txt b/Documentation/devicetree/bindings/arc/eznps.txt
> new file mode 100644
> index 0000000..f8b5e9b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arc/eznps.txt
> @@ -0,0 +1,7 @@
> +EZchip NPS Network Proccessor Platforms Device Tree Bindings
Processor
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH v3 01/18] Documentation: Add EZchip vendor to binding list
@ 2015-12-04 8:07 ` Daniel Lezcano
0 siblings, 0 replies; 60+ messages in thread
From: Daniel Lezcano @ 2015-12-04 8:07 UTC (permalink / raw)
To: linux-snps-arc
On 12/01/2015 02:02 PM, Noam Camus wrote:
> From: Noam Camus <noamc at ezchip.com>
>
> Add EZchip to vendor prefixes list.
> EZchip introduce the NPS platform for the ARC architecture.
>
> Signed-off-by: Noam Camus <noamc at ezchip.com>
> Acked-by: Rob Herring <robh+dt at kernel.org>
> Cc: Pawel Moll <pawel.moll at arm.com>
> ---
> Documentation/devicetree/bindings/arc/eznps.txt | 7 +++++++
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> 2 files changed, 8 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arc/eznps.txt
>
> diff --git a/Documentation/devicetree/bindings/arc/eznps.txt b/Documentation/devicetree/bindings/arc/eznps.txt
> new file mode 100644
> index 0000000..f8b5e9b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arc/eznps.txt
> @@ -0,0 +1,7 @@
> +EZchip NPS Network Proccessor Platforms Device Tree Bindings
Processor
--
<http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 03/18] clocksource: Add NPS400 timers driver
2015-12-01 13:02 ` Noam Camus
@ 2015-12-04 9:13 ` Daniel Lezcano
-1 siblings, 0 replies; 60+ messages in thread
From: Daniel Lezcano @ 2015-12-04 9:13 UTC (permalink / raw)
To: Noam Camus, linux-snps-arc
Cc: linux-kernel, cmetcalf, Rob Herring, Thomas Gleixner, John Stultz
On 12/01/2015 02:02 PM, Noam Camus wrote:
> From: Noam Camus <noamc@ezchip.com>
>
> Add internal tick generator which is shared by all cores.
> Each cluster of cores view it through dedicated address.
> This is used for SMP system where all CPUs synced by same
> clock source.
>
> Signed-off-by: Noam Camus <noamc@ezchip.com>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: John Stultz <john.stultz@linaro.org>
> Acked-by: Vineet Gupta <vgupta@synopsys.com>
[ ... ]
> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> index 56bd16e..20969b0 100644
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -46,6 +46,7 @@ obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o
> obj-$(CONFIG_MTK_TIMER) += mtk_timer.o
> obj-$(CONFIG_CLKSRC_PISTACHIO) += time-pistachio.o
> obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o
> +obj-$(CONFIG_ARC_PLAT_EZNPS) += timer-nps.o
CONFIG_CLKSRC_NPS
>
> obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
> obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
> diff --git a/drivers/clocksource/timer-nps.c b/drivers/clocksource/timer-nps.c
> new file mode 100644
> index 0000000..ef8f287
> --- /dev/null
> +++ b/drivers/clocksource/timer-nps.c
> @@ -0,0 +1,63 @@
> +/*
> + * Copyright(c) 2015 EZchip Technologies.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * The full GNU General Public License is included in this distribution in
> + * the file called "COPYING".
> + */
> +
> +#include <linux/clocksource.h>
> +#include <linux/of.h>
> +#include <linux/of_fdt.h>
> +#include <plat/ctop.h>
Why do you need this header ? nps_host_reg ?
We prevent to include headers from <plat> in the drivers directory. You
should find a way to get rid of it.
> +#define NPS_MSU_TICK_LOW 0xC8
> +#define NPS_CLUSTER_OFFSET 8
> +#define NPS_CLUSTER_NUM 16
> +
> +static void *nps_msu_reg_low_addr[NPS_CLUSTER_NUM] __read_mostly;
Perhaps a small optimization...
static DEFINE_PER_CPU_READ_MOSTLY(void __iomem *, baseaddr);
static cycle_t nps_clksrc_read(struct clocksource *clksrc)
{
void __iomem *base = per_cpu(baseaddr, raw_smp_processor_id());
return (cycle_t)ioread32be(base);
}
and in the init function:
for_each_cpu(cpu) {
per_cpu(baseaddr, cpu) = nps_host_reg(cpu,
NPS_MSU_BLKID,
NPS_MSU_TICK_LOW
}
> +static cycle_t nps_clksrc_read(struct clocksource *clksrc)
> +{
> + int cluster = raw_smp_processor_id() >> NPS_CLUSTER_OFFSET;
> +
> + return (cycle_t)ioread32be(nps_msu_reg_low_addr[cluster]);
AFAICT, there is a memory barrier with ioread32be, are you really sure
we have to use it in this code path ?
> +}
> +
> +static struct clocksource nps_counter = {
> + .name = "EZnps-tick",
> + .rating = 301,
> + .read = nps_clksrc_read,
> + .mask = CLOCKSOURCE_MASK(32),
> + .flags = CLOCK_SOURCE_IS_CONTINUOUS,
> +};
> +
> +static void __init nps_setup_clocksource(struct device_node *node)
> +{
> + struct clocksource *clksrc = &nps_counter;
> + unsigned long rate, dt_root;
> + int ret, cluster;
> +
> + for (cluster = 0; cluster < NPS_CLUSTER_NUM; cluster++)
> + nps_msu_reg_low_addr[cluster] =
> + nps_host_reg((cluster << NPS_CLUSTER_OFFSET),
> + NPS_MSU_BLKID, NPS_MSU_TICK_LOW);
> +
> + dt_root = of_get_flat_dt_root();
> + rate = (u32)of_get_flat_dt_prop(dt_root, "clock-frequency", NULL);
I don't get why this is done this way. The Kconfig option help says the
clocksource rate is 1GHz but in the DT the clock is 88MHz.
It would be cleaner to define a fixed clock and then add a phandle in
the DT.
timer_clk: timer_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <123456789>;
};
timer {
compatible = "ezchip,nps400-timer";
clocks = <&timer_clk>;
}
That will result in the same code than the other drivers.
clk = of_clk_get(np, 0);
if (IS_ERR(clk)) {
pr_err("%s: invalid clock\n", np->full_name);
return;
}
rate = clk_get_rate(clk);
> + ret = clocksource_register_hz(clksrc, rate);
> + if (ret)
> + pr_err("Couldn't register clock source.\n");
> +}
> +
> +CLOCKSOURCE_OF_DECLARE(nps_400, "ezchip,nps400-timer",
> + nps_setup_clocksource);
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH v3 03/18] clocksource: Add NPS400 timers driver
@ 2015-12-04 9:13 ` Daniel Lezcano
0 siblings, 0 replies; 60+ messages in thread
From: Daniel Lezcano @ 2015-12-04 9:13 UTC (permalink / raw)
To: linux-snps-arc
On 12/01/2015 02:02 PM, Noam Camus wrote:
> From: Noam Camus <noamc at ezchip.com>
>
> Add internal tick generator which is shared by all cores.
> Each cluster of cores view it through dedicated address.
> This is used for SMP system where all CPUs synced by same
> clock source.
>
> Signed-off-by: Noam Camus <noamc at ezchip.com>
> Cc: Daniel Lezcano <daniel.lezcano at linaro.org>
> Cc: Rob Herring <robh+dt at kernel.org>
> Cc: Thomas Gleixner <tglx at linutronix.de>
> Cc: John Stultz <john.stultz at linaro.org>
> Acked-by: Vineet Gupta <vgupta at synopsys.com>
[ ... ]
> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> index 56bd16e..20969b0 100644
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -46,6 +46,7 @@ obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o
> obj-$(CONFIG_MTK_TIMER) += mtk_timer.o
> obj-$(CONFIG_CLKSRC_PISTACHIO) += time-pistachio.o
> obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o
> +obj-$(CONFIG_ARC_PLAT_EZNPS) += timer-nps.o
CONFIG_CLKSRC_NPS
>
> obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
> obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
> diff --git a/drivers/clocksource/timer-nps.c b/drivers/clocksource/timer-nps.c
> new file mode 100644
> index 0000000..ef8f287
> --- /dev/null
> +++ b/drivers/clocksource/timer-nps.c
> @@ -0,0 +1,63 @@
> +/*
> + * Copyright(c) 2015 EZchip Technologies.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * The full GNU General Public License is included in this distribution in
> + * the file called "COPYING".
> + */
> +
> +#include <linux/clocksource.h>
> +#include <linux/of.h>
> +#include <linux/of_fdt.h>
> +#include <plat/ctop.h>
Why do you need this header ? nps_host_reg ?
We prevent to include headers from <plat> in the drivers directory. You
should find a way to get rid of it.
> +#define NPS_MSU_TICK_LOW 0xC8
> +#define NPS_CLUSTER_OFFSET 8
> +#define NPS_CLUSTER_NUM 16
> +
> +static void *nps_msu_reg_low_addr[NPS_CLUSTER_NUM] __read_mostly;
Perhaps a small optimization...
static DEFINE_PER_CPU_READ_MOSTLY(void __iomem *, baseaddr);
static cycle_t nps_clksrc_read(struct clocksource *clksrc)
{
void __iomem *base = per_cpu(baseaddr, raw_smp_processor_id());
return (cycle_t)ioread32be(base);
}
and in the init function:
for_each_cpu(cpu) {
per_cpu(baseaddr, cpu) = nps_host_reg(cpu,
NPS_MSU_BLKID,
NPS_MSU_TICK_LOW
}
> +static cycle_t nps_clksrc_read(struct clocksource *clksrc)
> +{
> + int cluster = raw_smp_processor_id() >> NPS_CLUSTER_OFFSET;
> +
> + return (cycle_t)ioread32be(nps_msu_reg_low_addr[cluster]);
AFAICT, there is a memory barrier with ioread32be, are you really sure
we have to use it in this code path ?
> +}
> +
> +static struct clocksource nps_counter = {
> + .name = "EZnps-tick",
> + .rating = 301,
> + .read = nps_clksrc_read,
> + .mask = CLOCKSOURCE_MASK(32),
> + .flags = CLOCK_SOURCE_IS_CONTINUOUS,
> +};
> +
> +static void __init nps_setup_clocksource(struct device_node *node)
> +{
> + struct clocksource *clksrc = &nps_counter;
> + unsigned long rate, dt_root;
> + int ret, cluster;
> +
> + for (cluster = 0; cluster < NPS_CLUSTER_NUM; cluster++)
> + nps_msu_reg_low_addr[cluster] =
> + nps_host_reg((cluster << NPS_CLUSTER_OFFSET),
> + NPS_MSU_BLKID, NPS_MSU_TICK_LOW);
> +
> + dt_root = of_get_flat_dt_root();
> + rate = (u32)of_get_flat_dt_prop(dt_root, "clock-frequency", NULL);
I don't get why this is done this way. The Kconfig option help says the
clocksource rate is 1GHz but in the DT the clock is 88MHz.
It would be cleaner to define a fixed clock and then add a phandle in
the DT.
timer_clk: timer_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <123456789>;
};
timer {
compatible = "ezchip,nps400-timer";
clocks = <&timer_clk>;
}
That will result in the same code than the other drivers.
clk = of_clk_get(np, 0);
if (IS_ERR(clk)) {
pr_err("%s: invalid clock\n", np->full_name);
return;
}
rate = clk_get_rate(clk);
> + ret = clocksource_register_hz(clksrc, rate);
> + if (ret)
> + pr_err("Couldn't register clock source.\n");
> +}
> +
> +CLOCKSOURCE_OF_DECLARE(nps_400, "ezchip,nps400-timer",
> + nps_setup_clocksource);
>
--
<http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 01/18] Documentation: Add EZchip vendor to binding list
2015-12-04 8:07 ` Daniel Lezcano
@ 2015-12-04 11:46 ` Noam Camus
-1 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-04 11:46 UTC (permalink / raw)
To: Daniel Lezcano, linux-snps-arc; +Cc: linux-kernel, Chris Metcalf, Pawel Moll
>From: Daniel Lezcano <daniel.lezcano@linaro.org>
>Sent: Friday, December 4, 2015 10:07 AM
>>
>> diff --git a/Documentation/devicetree/bindings/arc/eznps.txt b/Documentation/devicetree/bindings/arc/eznps.txt
>> new file mode 100644
>> index 0000000..f8b5e9b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arc/eznps.txt
>> @@ -0,0 +1,7 @@
>> +EZchip NPS Network Proccessor Platforms Device Tree Bindings
>
>Processor
Thanks
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH v3 01/18] Documentation: Add EZchip vendor to binding list
@ 2015-12-04 11:46 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-04 11:46 UTC (permalink / raw)
To: linux-snps-arc
>From: Daniel Lezcano <daniel.lezcano at linaro.org>
>Sent: Friday, December 4, 2015 10:07 AM
>>
>> diff --git a/Documentation/devicetree/bindings/arc/eznps.txt b/Documentation/devicetree/bindings/arc/eznps.txt
>> new file mode 100644
>> index 0000000..f8b5e9b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arc/eznps.txt
>> @@ -0,0 +1,7 @@
>> +EZchip NPS Network Proccessor Platforms Device Tree Bindings
>
>Processor
Thanks
--
<http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 03/18] clocksource: Add NPS400 timers driver
2015-12-04 9:13 ` Daniel Lezcano
@ 2015-12-04 12:26 ` Noam Camus
-1 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-04 12:26 UTC (permalink / raw)
To: Daniel Lezcano, linux-snps-arc
Cc: linux-kernel, Chris Metcalf, Rob Herring, Thomas Gleixner, John Stultz
>From: Daniel Lezcano <daniel.lezcano@linaro.org>
>Sent: Friday, December 4, 2015 11:13 AM
>> +obj-$(CONFIG_ARC_PLAT_EZNPS) += timer-nps.o
>CONFIG_CLKSRC_NPS
I wish this driver to be build only for this specific ARC platform.
This clock source is embedded in our SoC.
It is not meant to be built for any other architecture.
This is why below I include header from our ARC platform to avoid code duplicity.
>> +#include <plat/ctop.h>
>Why do you need this header ? nps_host_reg ?
Correct we use common code from our platform.
>We prevent to include headers from <plat> in the drivers directory. You
>should find a way to get rid of it.
The Only way I can think of is code duplicity and I prefer not to.
I see some include to asm/mach headers in clocksource, what is the difference?
Could you suggest a better place for me to place my header file.
>> +static void *nps_msu_reg_low_addr[NPS_CLUSTER_NUM] __read_mostly;
>
>Perhaps a small optimization...
Thanks
>static DEFINE_PER_CPU_READ_MOSTLY(void __iomem *, baseaddr);
>static cycle_t nps_clksrc_read(struct clocksource *clksrc)
>{
> void __iomem *base = per_cpu(baseaddr, raw_smp_processor_id());
>
> return (cycle_t)ioread32be(base);
>}
>and in the init function:
>for_each_cpu(cpu) {
> per_cpu(baseaddr, cpu) = nps_host_reg(cpu,
> NPS_MSU_BLKID,
> NPS_MSU_TICK_LOW
>}
Thanks again
>> +static cycle_t nps_clksrc_read(struct clocksource *clksrc)
>> +{
>> + int cluster = raw_smp_processor_id() >> NPS_CLUSTER_OFFSET;
>> +
>> + return (cycle_t)ioread32be(nps_msu_reg_low_addr[cluster]);
>,AFAICT, there is a memory barrier with ioread32be, are you really sure
>we have to use it in this code path ?
Are you saying to remove use of ioread32be?
What should I use instead?
>> +
>> + dt_root = of_get_flat_dt_root();
>> + rate = (u32)of_get_flat_dt_prop(dt_root, "clock-frequency", NULL);
>I don't get why this is done this way. The Kconfig option help says the
>clocksource rate is 1GHz but in the DT the clock is 88MHz.
It says that clock source is up to 1GHz
>It would be cleaner to define a fixed clock and then add a phandle in
>the DT.
> timer_clk: timer_clk {
> #clock-cells = <0>;
> compatible = "fixed-clock";
> clock-frequency = <123456789>;
> };
> timer {
> compatible = "ezchip,nps400-timer";
> clocks = <&timer_clk>;
> }
>That will result in the same code than the other drivers.
> clk = of_clk_get(np, 0);
> if (IS_ERR(clk)) {
> pr_err("%s: invalid clock\n", np->full_name);
> return;
> }
> rate = clk_get_rate(clk);
Once again thanks I will fix this.
-Noam
^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH v3 03/18] clocksource: Add NPS400 timers driver
@ 2015-12-04 12:26 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-04 12:26 UTC (permalink / raw)
To: linux-snps-arc
>From: Daniel Lezcano <daniel.lezcano at linaro.org>
>Sent: Friday, December 4, 2015 11:13 AM
>> +obj-$(CONFIG_ARC_PLAT_EZNPS) += timer-nps.o
>CONFIG_CLKSRC_NPS
I wish this driver to be build only for this specific ARC platform.
This clock source is embedded in our SoC.
It is not meant to be built for any other architecture.
This is why below I include header from our ARC platform to avoid code duplicity.
>> +#include <plat/ctop.h>
>Why do you need this header ? nps_host_reg ?
Correct we use common code from our platform.
>We prevent to include headers from <plat> in the drivers directory. You
>should find a way to get rid of it.
The Only way I can think of is code duplicity and I prefer not to.
I see some include to asm/mach headers in clocksource, what is the difference?
Could you suggest a better place for me to place my header file.
>> +static void *nps_msu_reg_low_addr[NPS_CLUSTER_NUM] __read_mostly;
>
>Perhaps a small optimization...
Thanks
>static DEFINE_PER_CPU_READ_MOSTLY(void __iomem *, baseaddr);
>static cycle_t nps_clksrc_read(struct clocksource *clksrc)
>{
> void __iomem *base = per_cpu(baseaddr, raw_smp_processor_id());
>
> return (cycle_t)ioread32be(base);
>}
>and in the init function:
>for_each_cpu(cpu) {
> per_cpu(baseaddr, cpu) = nps_host_reg(cpu,
> NPS_MSU_BLKID,
> NPS_MSU_TICK_LOW
>}
Thanks again
>> +static cycle_t nps_clksrc_read(struct clocksource *clksrc)
>> +{
>> + int cluster = raw_smp_processor_id() >> NPS_CLUSTER_OFFSET;
>> +
>> + return (cycle_t)ioread32be(nps_msu_reg_low_addr[cluster]);
>,AFAICT, there is a memory barrier with ioread32be, are you really sure
>we have to use it in this code path ?
Are you saying to remove use of ioread32be?
What should I use instead?
>> +
>> + dt_root = of_get_flat_dt_root();
>> + rate = (u32)of_get_flat_dt_prop(dt_root, "clock-frequency", NULL);
>I don't get why this is done this way. The Kconfig option help says the
>clocksource rate is 1GHz but in the DT the clock is 88MHz.
It says that clock source is up to 1GHz
>It would be cleaner to define a fixed clock and then add a phandle in
>the DT.
> timer_clk: timer_clk {
> #clock-cells = <0>;
> compatible = "fixed-clock";
> clock-frequency = <123456789>;
> };
> timer {
> compatible = "ezchip,nps400-timer";
> clocks = <&timer_clk>;
> }
>That will result in the same code than the other drivers.
> clk = of_clk_get(np, 0);
> if (IS_ERR(clk)) {
> pr_err("%s: invalid clock\n", np->full_name);
> return;
> }
> rate = clk_get_rate(clk);
Once again thanks I will fix this.
-Noam
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 03/18] clocksource: Add NPS400 timers driver
2015-12-04 12:26 ` Noam Camus
@ 2015-12-04 12:52 ` Daniel Lezcano
-1 siblings, 0 replies; 60+ messages in thread
From: Daniel Lezcano @ 2015-12-04 12:52 UTC (permalink / raw)
To: Noam Camus, linux-snps-arc
Cc: linux-kernel, Chris Metcalf, Rob Herring, Thomas Gleixner, John Stultz
On 12/04/2015 01:26 PM, Noam Camus wrote:
>> From: Daniel Lezcano <daniel.lezcano@linaro.org>
>> Sent: Friday, December 4, 2015 11:13 AM
>>> +obj-$(CONFIG_ARC_PLAT_EZNPS) += timer-nps.o
>
>> CONFIG_CLKSRC_NPS
> I wish this driver to be build only for this specific ARC platform.
> This clock source is embedded in our SoC.
I understand but we are removing all platform specific Kconfig options
from the drivers. If CONFIG_CLKSRC_NPS is selected by
CONFIG_ARC_PLAT_EZNPS only, the result is the same.
By the way, it is probable the "if COMPILE_TEST" option is added later
to the option. We are trying to have the drivers to be compilable on
different platforms in order to increase the compilation test coverage.
It is useful for instance when we touch a common code which impact all
the drivers, we don't need the specific platform to compile on it and we
minimize a cross compile toolchain usage. Hence compilation failure on
ARC will be detected sooner, before the next merge window happens.
For this reason, having common code in the driver is important and
including a platform breaks the current effort.
> It is not meant to be built for any other architecture.
> This is why below I include header from our ARC platform to avoid code duplicity.
>
>>> +#include <plat/ctop.h>
>
>> Why do you need this header ? nps_host_reg ?
> Correct we use common code from our platform.
>
>> We prevent to include headers from <plat> in the drivers directory. You
>> should find a way to get rid of it.
>
> The Only way I can think of is code duplicity and I prefer not to.
> I see some include to asm/mach headers in clocksource, what is the difference?
The difference is <asm> includes are architecture dependent and could be
acceptable if there is no choice (all arm timers use the same
functionality from these headers), while <plat> includes are platform
specific, so restricted to a specific platform.
> Could you suggest a better place for me to place my header file.
Yes, perhaps:
include/soc/nps
drivers/soc/nps
>>> +static void *nps_msu_reg_low_addr[NPS_CLUSTER_NUM] __read_mostly;
>>
>> Perhaps a small optimization...
> Thanks
>
>> static DEFINE_PER_CPU_READ_MOSTLY(void __iomem *, baseaddr);
>
>> static cycle_t nps_clksrc_read(struct clocksource *clksrc)
>> {
>> void __iomem *base = per_cpu(baseaddr, raw_smp_processor_id());
>>
> > return (cycle_t)ioread32be(base);
>> }
>
>> and in the init function:
>
>> for_each_cpu(cpu) {
>> per_cpu(baseaddr, cpu) = nps_host_reg(cpu,
>> NPS_MSU_BLKID,
>> NPS_MSU_TICK_LOW
>> }
> Thanks again
>
>
>>> +static cycle_t nps_clksrc_read(struct clocksource *clksrc)
>>> +{
>>> + int cluster = raw_smp_processor_id() >> NPS_CLUSTER_OFFSET;
>>> +
>>> + return (cycle_t)ioread32be(nps_msu_reg_low_addr[cluster]);
>
>> ,AFAICT, there is a memory barrier with ioread32be, are you really sure
>> we have to use it in this code path ?
> Are you saying to remove use of ioread32be?
> What should I use instead?
Never mind, I looked at the arm's ioread32be definition where there is a
memory barrier. With this architecture ioread32be uses the generic one
without the memory barrier (well, yes it uses one in the raw_readl asm
implementation but we can't do anything).
>>> +
>>> + dt_root = of_get_flat_dt_root();
>>> + rate = (u32)of_get_flat_dt_prop(dt_root, "clock-frequency", NULL);
>
>> I don't get why this is done this way. The Kconfig option help says the
>> clocksource rate is 1GHz but in the DT the clock is 88MHz.
> It says that clock source is up to 1GHz
ah ok.
>> It would be cleaner to define a fixed clock and then add a phandle in
>> the DT.
>
>> timer_clk: timer_clk {
>> #clock-cells = <0>;
>> compatible = "fixed-clock";
>> clock-frequency = <123456789>;
>> };
>
>> timer {
>> compatible = "ezchip,nps400-timer";
>> clocks = <&timer_clk>;
>> }
>
>> That will result in the same code than the other drivers.
>
>> clk = of_clk_get(np, 0);
>> if (IS_ERR(clk)) {
>> pr_err("%s: invalid clock\n", np->full_name);
>> return;
>> }
>
>> rate = clk_get_rate(clk);
> Once again thanks I will fix this.
>
> -Noam
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH v3 03/18] clocksource: Add NPS400 timers driver
@ 2015-12-04 12:52 ` Daniel Lezcano
0 siblings, 0 replies; 60+ messages in thread
From: Daniel Lezcano @ 2015-12-04 12:52 UTC (permalink / raw)
To: linux-snps-arc
On 12/04/2015 01:26 PM, Noam Camus wrote:
>> From: Daniel Lezcano <daniel.lezcano at linaro.org>
>> Sent: Friday, December 4, 2015 11:13 AM
>>> +obj-$(CONFIG_ARC_PLAT_EZNPS) += timer-nps.o
>
>> CONFIG_CLKSRC_NPS
> I wish this driver to be build only for this specific ARC platform.
> This clock source is embedded in our SoC.
I understand but we are removing all platform specific Kconfig options
from the drivers. If CONFIG_CLKSRC_NPS is selected by
CONFIG_ARC_PLAT_EZNPS only, the result is the same.
By the way, it is probable the "if COMPILE_TEST" option is added later
to the option. We are trying to have the drivers to be compilable on
different platforms in order to increase the compilation test coverage.
It is useful for instance when we touch a common code which impact all
the drivers, we don't need the specific platform to compile on it and we
minimize a cross compile toolchain usage. Hence compilation failure on
ARC will be detected sooner, before the next merge window happens.
For this reason, having common code in the driver is important and
including a platform breaks the current effort.
> It is not meant to be built for any other architecture.
> This is why below I include header from our ARC platform to avoid code duplicity.
>
>>> +#include <plat/ctop.h>
>
>> Why do you need this header ? nps_host_reg ?
> Correct we use common code from our platform.
>
>> We prevent to include headers from <plat> in the drivers directory. You
>> should find a way to get rid of it.
>
> The Only way I can think of is code duplicity and I prefer not to.
> I see some include to asm/mach headers in clocksource, what is the difference?
The difference is <asm> includes are architecture dependent and could be
acceptable if there is no choice (all arm timers use the same
functionality from these headers), while <plat> includes are platform
specific, so restricted to a specific platform.
> Could you suggest a better place for me to place my header file.
Yes, perhaps:
include/soc/nps
drivers/soc/nps
>>> +static void *nps_msu_reg_low_addr[NPS_CLUSTER_NUM] __read_mostly;
>>
>> Perhaps a small optimization...
> Thanks
>
>> static DEFINE_PER_CPU_READ_MOSTLY(void __iomem *, baseaddr);
>
>> static cycle_t nps_clksrc_read(struct clocksource *clksrc)
>> {
>> void __iomem *base = per_cpu(baseaddr, raw_smp_processor_id());
>>
> > return (cycle_t)ioread32be(base);
>> }
>
>> and in the init function:
>
>> for_each_cpu(cpu) {
>> per_cpu(baseaddr, cpu) = nps_host_reg(cpu,
>> NPS_MSU_BLKID,
>> NPS_MSU_TICK_LOW
>> }
> Thanks again
>
>
>>> +static cycle_t nps_clksrc_read(struct clocksource *clksrc)
>>> +{
>>> + int cluster = raw_smp_processor_id() >> NPS_CLUSTER_OFFSET;
>>> +
>>> + return (cycle_t)ioread32be(nps_msu_reg_low_addr[cluster]);
>
>> ,AFAICT, there is a memory barrier with ioread32be, are you really sure
>> we have to use it in this code path ?
> Are you saying to remove use of ioread32be?
> What should I use instead?
Never mind, I looked at the arm's ioread32be definition where there is a
memory barrier. With this architecture ioread32be uses the generic one
without the memory barrier (well, yes it uses one in the raw_readl asm
implementation but we can't do anything).
>>> +
>>> + dt_root = of_get_flat_dt_root();
>>> + rate = (u32)of_get_flat_dt_prop(dt_root, "clock-frequency", NULL);
>
>> I don't get why this is done this way. The Kconfig option help says the
>> clocksource rate is 1GHz but in the DT the clock is 88MHz.
> It says that clock source is up to 1GHz
ah ok.
>> It would be cleaner to define a fixed clock and then add a phandle in
>> the DT.
>
>> timer_clk: timer_clk {
>> #clock-cells = <0>;
>> compatible = "fixed-clock";
>> clock-frequency = <123456789>;
>> };
>
>> timer {
>> compatible = "ezchip,nps400-timer";
>> clocks = <&timer_clk>;
>> }
>
>> That will result in the same code than the other drivers.
>
>> clk = of_clk_get(np, 0);
>> if (IS_ERR(clk)) {
>> pr_err("%s: invalid clock\n", np->full_name);
>> return;
>> }
>
>> rate = clk_get_rate(clk);
> Once again thanks I will fix this.
>
> -Noam
>
--
<http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
^ permalink raw reply [flat|nested] 60+ messages in thread
* RE: [PATCH v3 04/18] irqchip: add nps Internal and external irqchips
2015-12-03 18:33 ` Marc Zyngier
@ 2015-12-07 11:19 ` Noam Camus
-1 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-07 11:19 UTC (permalink / raw)
To: Marc Zyngier, linux-snps-arc
Cc: linux-kernel, Chris Metcalf, Thomas Gleixner, Jason Cooper
From: Marc Zyngier [mailto:marc.zyngier@arm.com]
Sent: Thursday, December 03, 2015 8:34 PM
>>> Silly question: why cannot you just write the actual instruction
>>> instead of shoving the instruction like this? Also, .inst would be
>>> more appropriate...
>> [Noam Camus] Since this is instruction that yet is not part of
>> up-streamed binutils of ARC. Now ARC maintainer can build our kernel
>> with generic ARC toolchain.
>OK. If you decide to carry on using this, I'd still recommend using .inst instead of .word, so that you can get a proper disassembly.
Seem to me that ".inst" is ARM Machine directive.
>Also, can you always tell the per-cpu property of your interrupt based on its number? If you can, then it is fine.
Yes I can, and I am using this knowledge.
>Your alternative is to use irq_domain_add_linear, for example, and to make sure that you always refer to the hw number when manipulating the HW. You will quickly notice that the Linux IRQ number has nothing to do with the HW one, and you'll be able to quickly iron out the bugs.
Indeed when I moved from legacy to linear map I had to call irq_create_mapping() for my percpu IRQs and that's it.
Thanks
-Noam
^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH v3 04/18] irqchip: add nps Internal and external irqchips
@ 2015-12-07 11:19 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-07 11:19 UTC (permalink / raw)
To: linux-snps-arc
From: Marc Zyngier [mailto:marc.zyngier@arm.com]
Sent: Thursday, December 03, 2015 8:34 PM
>>> Silly question: why cannot you just write the actual instruction
>>> instead of shoving the instruction like this? Also, .inst would be
>>> more appropriate...
>> [Noam Camus] Since this is instruction that yet is not part of
>> up-streamed binutils of ARC. Now ARC maintainer can build our kernel
>> with generic ARC toolchain.
>OK. If you decide to carry on using this, I'd still recommend using .inst instead of .word, so that you can get a proper disassembly.
Seem to me that ".inst" is ARM Machine directive.
>Also, can you always tell the per-cpu property of your interrupt based on its number? If you can, then it is fine.
Yes I can, and I am using this knowledge.
>Your alternative is to use irq_domain_add_linear, for example, and to make sure that you always refer to the hw number when manipulating the HW. You will quickly notice that the Linux IRQ number has nothing to do with the HW one, and you'll be able to quickly iron out the bugs.
Indeed when I moved from legacy to linear map I had to call irq_create_mapping() for my percpu IRQs and that's it.
Thanks
-Noam
^ permalink raw reply [flat|nested] 60+ messages in thread
* RE: [PATCH v3 03/18] clocksource: Add NPS400 timers driver
2015-12-04 9:13 ` Daniel Lezcano
@ 2015-12-08 13:00 ` Noam Camus
-1 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-08 13:00 UTC (permalink / raw)
To: Daniel Lezcano, linux-snps-arc
Cc: linux-kernel, Chris Metcalf, Rob Herring, Thomas Gleixner, John Stultz
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 877 bytes --]
From: Daniel Lezcano [mailto:daniel.lezcano@linaro.org]
Sent: Friday, December 04, 2015 11:13 AM
>It would be cleaner to define a fixed clock and then add a phandle in the DT.
> timer_clk: timer_clk {
> #clock-cells = <0>;
> compatible = "fixed-clock";
> clock-frequency = <123456789>;
> };
> timer {
> compatible = "ezchip,nps400-timer";
> clocks = <&timer_clk>;
> }
>That will result in the same code than the other drivers.
> clk = of_clk_get(np, 0);
> if (IS_ERR(clk)) {
> pr_err("%s: invalid clock\n", np->full_name);
> return;
> }
> rate = clk_get_rate(clk);
Seem like my driver comes before "fixed-clock" driver so I failed since I got no clocksource provider.
How can this be solved?
-Noam
ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH v3 03/18] clocksource: Add NPS400 timers driver
@ 2015-12-08 13:00 ` Noam Camus
0 siblings, 0 replies; 60+ messages in thread
From: Noam Camus @ 2015-12-08 13:00 UTC (permalink / raw)
To: linux-snps-arc
From: Daniel Lezcano [mailto:daniel.lezcano@linaro.org]
Sent: Friday, December 04, 2015 11:13 AM
>It would be cleaner to define a fixed clock and then add a phandle in the DT.
> timer_clk: timer_clk {
> #clock-cells = <0>;
> compatible = "fixed-clock";
> clock-frequency = <123456789>;
> };
> timer {
> compatible = "ezchip,nps400-timer";
> clocks = <&timer_clk>;
> }
>That will result in the same code than the other drivers.
> clk = of_clk_get(np, 0);
> if (IS_ERR(clk)) {
> pr_err("%s: invalid clock\n", np->full_name);
> return;
> }
> rate = clk_get_rate(clk);
Seem like my driver comes before "fixed-clock" driver so I failed since I got no clocksource provider.
How can this be solved?
-Noam
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 04/18] irqchip: add nps Internal and external irqchips
2015-12-01 13:29 ` Marc Zyngier
@ 2015-12-11 7:58 ` Vineet Gupta
-1 siblings, 0 replies; 60+ messages in thread
From: Vineet Gupta @ 2015-12-11 7:58 UTC (permalink / raw)
To: Marc Zyngier, Noam Camus, linux-snps-arc
Cc: linux-kernel, cmetcalf, Thomas Gleixner, Jason Cooper
On Tuesday 01 December 2015 06:59 PM, Marc Zyngier wrote:
>> +static int nps400_irq_map(struct irq_domain *d, unsigned int irq,
>> > + irq_hw_number_t hw)
>> > +{
>> > + switch (irq) {
>> > + case TIMER0_IRQ:
>> > +#if defined(CONFIG_SMP)
>> > + case IPI_IRQ:
>> > +#endif
>> > + irq_set_chip_and_handler(irq, &nps400_irq_chip_percpu,
>> > + handle_percpu_irq);
>> > + break;
>> > + default:
>> > + irq_set_chip_and_handler(irq, &nps400_irq_chip_fasteoi,
>> > + handle_fasteoi_irq);
>> > + break;
>> > + }
> No. This is just wrong. Either you get per interrupt information from
> the device tree to configure the interrupt the right way, or you have
> different interrupt controllers for each device.
>
> But using the Linux irq number is always wrong. You should only consider
> the hwirq.
The source is this incorrectness is ARC core intc code which also does the same
thing and we get away with it because of the legacy domain usage.
I'll fix that up.
Thx,
-Vineet
^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH v3 04/18] irqchip: add nps Internal and external irqchips
@ 2015-12-11 7:58 ` Vineet Gupta
0 siblings, 0 replies; 60+ messages in thread
From: Vineet Gupta @ 2015-12-11 7:58 UTC (permalink / raw)
To: linux-snps-arc
On Tuesday 01 December 2015 06:59 PM, Marc Zyngier wrote:
>> +static int nps400_irq_map(struct irq_domain *d, unsigned int irq,
>> > + irq_hw_number_t hw)
>> > +{
>> > + switch (irq) {
>> > + case TIMER0_IRQ:
>> > +#if defined(CONFIG_SMP)
>> > + case IPI_IRQ:
>> > +#endif
>> > + irq_set_chip_and_handler(irq, &nps400_irq_chip_percpu,
>> > + handle_percpu_irq);
>> > + break;
>> > + default:
>> > + irq_set_chip_and_handler(irq, &nps400_irq_chip_fasteoi,
>> > + handle_fasteoi_irq);
>> > + break;
>> > + }
> No. This is just wrong. Either you get per interrupt information from
> the device tree to configure the interrupt the right way, or you have
> different interrupt controllers for each device.
>
> But using the Linux irq number is always wrong. You should only consider
> the hwirq.
The source is this incorrectness is ARC core intc code which also does the same
thing and we get away with it because of the legacy domain usage.
I'll fix that up.
Thx,
-Vineet
^ permalink raw reply [flat|nested] 60+ messages in thread
end of thread, other threads:[~2015-12-11 7:59 UTC | newest]
Thread overview: 60+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-12-01 13:02 [PATCH v3 00/18] *** SUBJECT HERE *** Noam Camus
2015-12-01 13:02 ` Noam Camus
2015-12-01 13:02 ` [PATCH v3 01/18] Documentation: Add EZchip vendor to binding list Noam Camus
2015-12-01 13:02 ` Noam Camus
2015-12-04 8:07 ` Daniel Lezcano
2015-12-04 8:07 ` Daniel Lezcano
2015-12-04 11:46 ` Noam Camus
2015-12-04 11:46 ` Noam Camus
2015-12-01 13:02 ` [PATCH v3 02/18] ARC: [plat-eznps] define IPI_IRQ Noam Camus
2015-12-01 13:02 ` Noam Camus
2015-12-01 13:02 ` [PATCH v3 03/18] clocksource: Add NPS400 timers driver Noam Camus
2015-12-01 13:02 ` Noam Camus
2015-12-04 9:13 ` Daniel Lezcano
2015-12-04 9:13 ` Daniel Lezcano
2015-12-04 12:26 ` Noam Camus
2015-12-04 12:26 ` Noam Camus
2015-12-04 12:52 ` Daniel Lezcano
2015-12-04 12:52 ` Daniel Lezcano
2015-12-08 13:00 ` Noam Camus
2015-12-08 13:00 ` Noam Camus
2015-12-01 13:02 ` [PATCH v3 04/18] irqchip: add nps Internal and external irqchips Noam Camus
2015-12-01 13:02 ` Noam Camus
2015-12-01 13:29 ` Marc Zyngier
2015-12-01 13:29 ` Marc Zyngier
2015-12-02 15:08 ` Noam Camus
2015-12-02 15:08 ` Noam Camus
2015-12-03 18:33 ` Marc Zyngier
2015-12-03 18:33 ` Marc Zyngier
2015-12-07 11:19 ` Noam Camus
2015-12-07 11:19 ` Noam Camus
2015-12-11 7:58 ` Vineet Gupta
2015-12-11 7:58 ` Vineet Gupta
2015-12-01 13:02 ` [PATCH v3 05/18] ARC: Set vmalloc size from configuration Noam Camus
2015-12-01 13:02 ` Noam Camus
2015-12-01 13:02 ` [PATCH v3 06/18] ARC: rwlock: disable interrupts in !LLSC variant Noam Camus
2015-12-01 13:02 ` Noam Camus
2015-12-01 13:02 ` [PATCH v3 07/18] ARC: rename smp operation init_irq_cpu() to init_per_cpu() Noam Camus
2015-12-01 13:02 ` Noam Camus
2015-12-01 13:02 ` [PATCH v3 08/18] ARC: Mark secondary cpu online only after all HW setup is done Noam Camus
2015-12-01 13:02 ` Noam Camus
2015-12-01 13:02 ` [PATCH v3 09/18] ARC: add CONFIG_CLKSRC_OF support to time_init() Noam Camus
2015-12-01 13:02 ` Noam Camus
2015-12-01 13:02 ` [PATCH v3 10/18] ARC: [plat-eznps] Add eznps board defconfig and dts Noam Camus
2015-12-01 13:02 ` Noam Camus
2015-12-01 13:02 ` [PATCH v3 11/18] ARC: [plat-eznps] Add eznps platform Noam Camus
2015-12-01 13:02 ` Noam Camus
2015-12-01 13:02 ` [PATCH v3 12/18] ARC: [plat-eznps] Use dedicated user stack top Noam Camus
2015-12-01 13:02 ` Noam Camus
2015-12-01 13:03 ` [PATCH v3 13/18] ARC: [plat-eznps] Use dedicated atomic/bitops/cmpxchg Noam Camus
2015-12-01 13:03 ` Noam Camus
2015-12-01 13:03 ` [PATCH v3 14/18] ARC: [plat-eznps] Use dedicated SMP barriers Noam Camus
2015-12-01 13:03 ` Noam Camus
2015-12-01 13:03 ` [PATCH v3 15/18] ARC: [plat-eznps] Use dedicated identity auxiliary register Noam Camus
2015-12-01 13:03 ` Noam Camus
2015-12-01 13:03 ` [PATCH v3 16/18] ARC: [plat-eznps] Use dedicated cpu_relax() Noam Camus
2015-12-01 13:03 ` Noam Camus
2015-12-01 13:03 ` [PATCH v3 17/18] ARC: [plat-eznps] Use dedicated COMMAND_LINE_SIZE Noam Camus
2015-12-01 13:03 ` Noam Camus
2015-12-01 13:03 ` [PATCH v3 18/18] ARC: Add eznps platform to Kconfig and Makefile Noam Camus
2015-12-01 13:03 ` Noam Camus
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.