All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
To: Romain Izard
	<romain.izard.pro-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Brian Norris
	<computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Yang Wenyou <Wenyou.Yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>,
	Josh Wu <rainyfeeling-1ViLX0X+lBJBDgjK7y7TUQ@public.gmane.org>,
	linux-arm-kernel
	<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
	Alexandre Belloni
	<alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Subject: Re: [PATCH v1 5/5] ARM: at91/dt: sama5d2: add nand0 and nfc0 nodes
Date: Wed, 13 Jan 2016 18:04:25 +0100	[thread overview]
Message-ID: <56968399.5070706@atmel.com> (raw)
In-Reply-To: <1452702857-2240-6-git-send-email-romain.izard.pro-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Le 13/01/2016 17:34, Romain Izard a écrit :
> Both nodes are required to access NAND Flash memory. Additional
> settings will be necessary at the board level to use it.
> 
> Signed-off-by: Romain Izard <romain.izard.pro-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
>  arch/arm/boot/dts/sama5d2.dtsi | 38 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
> index aee571448342..80420177ec1a 100644
> --- a/arch/arm/boot/dts/sama5d2.dtsi
> +++ b/arch/arm/boot/dts/sama5d2.dtsi
> @@ -265,6 +265,44 @@
>  			cache-level = <2>;
>  		};
>  
> +		nand0: nand@80000000 {
> +			compatible = "atmel,sama5d2-nand";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			reg = < /* EBI CS3 */
> +				0x80000000 0x08000000
> +				/* SMC PMECC regs */
> +				0xf8014070 0x00000490
> +				/* SMC PMECC Error Location regs */
> +				0xf8014500 0x00000200
> +				/* ROM Galois tables */
> +				0x00040000 0x00018000
> +				>;
> +			interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
> +			atmel,nand-addr-offset = <21>;
> +			atmel,nand-cmd-offset = <22>;
> +			atmel,nand-has-dma;
> +			atmel,has-pmecc;
> +			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
> +			status = "disabled";
> +
> +			nfc@90000000 {

It's nfc@c0000000

> +				compatible = "atmel,sama5d4-nfc";
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				reg = < /* NFC Command Registers */
> +					0xC0000000 0x08000000

Lower case please

> +					/* NFC HSMC regs */
> +					0xf8014000 0x00000070
> +					/* NFC SRAM banks */
> +					0x00100000 0x00100000
> +					>;
> +				clocks = <&hsmc_clk>;
> +				atmel,write-by-sram;
> +			};
> +		};
> +

Otherwise, it seems okay. When corrected, you can add my:
Acked-by: Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>

Brian, Wenyou,
I'm okay if this patch goes to Mainline with the mtd subsystem: there
should be no conflict with arm-soc for the upcoming kernel revisions.

Thanks, bye.


>  		sdmmc0: sdio-host@a0000000 {
>  			compatible = "atmel,sama5d2-sdhci";
>  			reg = <0xa0000000 0x300>;
> 


-- 
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Romain Izard <romain.izard.pro@gmail.com>,
	<linux-mtd@lists.infradead.org>, <devicetree@vger.kernel.org>,
	Brian Norris <computersforpeace@gmail.com>
Cc: Yang Wenyou <Wenyou.Yang@atmel.com>,
	Josh Wu <rainyfeeling@outlook.com>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
	Alexandre Belloni <alexandre.belloni@free-electrons.com>
Subject: Re: [PATCH v1 5/5] ARM: at91/dt: sama5d2: add nand0 and nfc0 nodes
Date: Wed, 13 Jan 2016 18:04:25 +0100	[thread overview]
Message-ID: <56968399.5070706@atmel.com> (raw)
In-Reply-To: <1452702857-2240-6-git-send-email-romain.izard.pro@gmail.com>

Le 13/01/2016 17:34, Romain Izard a écrit :
> Both nodes are required to access NAND Flash memory. Additional
> settings will be necessary at the board level to use it.
> 
> Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
> ---
>  arch/arm/boot/dts/sama5d2.dtsi | 38 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
> index aee571448342..80420177ec1a 100644
> --- a/arch/arm/boot/dts/sama5d2.dtsi
> +++ b/arch/arm/boot/dts/sama5d2.dtsi
> @@ -265,6 +265,44 @@
>  			cache-level = <2>;
>  		};
>  
> +		nand0: nand@80000000 {
> +			compatible = "atmel,sama5d2-nand";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			reg = < /* EBI CS3 */
> +				0x80000000 0x08000000
> +				/* SMC PMECC regs */
> +				0xf8014070 0x00000490
> +				/* SMC PMECC Error Location regs */
> +				0xf8014500 0x00000200
> +				/* ROM Galois tables */
> +				0x00040000 0x00018000
> +				>;
> +			interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
> +			atmel,nand-addr-offset = <21>;
> +			atmel,nand-cmd-offset = <22>;
> +			atmel,nand-has-dma;
> +			atmel,has-pmecc;
> +			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
> +			status = "disabled";
> +
> +			nfc@90000000 {

It's nfc@c0000000

> +				compatible = "atmel,sama5d4-nfc";
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				reg = < /* NFC Command Registers */
> +					0xC0000000 0x08000000

Lower case please

> +					/* NFC HSMC regs */
> +					0xf8014000 0x00000070
> +					/* NFC SRAM banks */
> +					0x00100000 0x00100000
> +					>;
> +				clocks = <&hsmc_clk>;
> +				atmel,write-by-sram;
> +			};
> +		};
> +

Otherwise, it seems okay. When corrected, you can add my:
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Brian, Wenyou,
I'm okay if this patch goes to Mainline with the mtd subsystem: there
should be no conflict with arm-soc for the upcoming kernel revisions.

Thanks, bye.


>  		sdmmc0: sdio-host@a0000000 {
>  			compatible = "atmel,sama5d2-sdhci";
>  			reg = <0xa0000000 0x300>;
> 


-- 
Nicolas Ferre

WARNING: multiple messages have this Message-ID (diff)
From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 5/5] ARM: at91/dt: sama5d2: add nand0 and nfc0 nodes
Date: Wed, 13 Jan 2016 18:04:25 +0100	[thread overview]
Message-ID: <56968399.5070706@atmel.com> (raw)
In-Reply-To: <1452702857-2240-6-git-send-email-romain.izard.pro@gmail.com>

Le 13/01/2016 17:34, Romain Izard a ?crit :
> Both nodes are required to access NAND Flash memory. Additional
> settings will be necessary at the board level to use it.
> 
> Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
> ---
>  arch/arm/boot/dts/sama5d2.dtsi | 38 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
> index aee571448342..80420177ec1a 100644
> --- a/arch/arm/boot/dts/sama5d2.dtsi
> +++ b/arch/arm/boot/dts/sama5d2.dtsi
> @@ -265,6 +265,44 @@
>  			cache-level = <2>;
>  		};
>  
> +		nand0: nand at 80000000 {
> +			compatible = "atmel,sama5d2-nand";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			reg = < /* EBI CS3 */
> +				0x80000000 0x08000000
> +				/* SMC PMECC regs */
> +				0xf8014070 0x00000490
> +				/* SMC PMECC Error Location regs */
> +				0xf8014500 0x00000200
> +				/* ROM Galois tables */
> +				0x00040000 0x00018000
> +				>;
> +			interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
> +			atmel,nand-addr-offset = <21>;
> +			atmel,nand-cmd-offset = <22>;
> +			atmel,nand-has-dma;
> +			atmel,has-pmecc;
> +			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
> +			status = "disabled";
> +
> +			nfc at 90000000 {

It's nfc at c0000000

> +				compatible = "atmel,sama5d4-nfc";
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				reg = < /* NFC Command Registers */
> +					0xC0000000 0x08000000

Lower case please

> +					/* NFC HSMC regs */
> +					0xf8014000 0x00000070
> +					/* NFC SRAM banks */
> +					0x00100000 0x00100000
> +					>;
> +				clocks = <&hsmc_clk>;
> +				atmel,write-by-sram;
> +			};
> +		};
> +

Otherwise, it seems okay. When corrected, you can add my:
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Brian, Wenyou,
I'm okay if this patch goes to Mainline with the mtd subsystem: there
should be no conflict with arm-soc for the upcoming kernel revisions.

Thanks, bye.


>  		sdmmc0: sdio-host at a0000000 {
>  			compatible = "atmel,sama5d2-sdhci";
>  			reg = <0xa0000000 0x300>;
> 


-- 
Nicolas Ferre

  parent reply	other threads:[~2016-01-13 17:04 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-13 16:34 [PATCH v1 0/5] mtd: atmel_nand: Add support for NAND Flash on SAMA5D2 Romain Izard
2016-01-13 16:34 ` Romain Izard
     [not found] ` <1452702857-2240-1-git-send-email-romain.izard.pro-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-01-13 16:34   ` [PATCH v1 1/5] mtd: atmel_nand: Do not warn on bitflips Romain Izard
2016-01-13 16:34     ` Romain Izard
     [not found]     ` <1452702857-2240-2-git-send-email-romain.izard.pro-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-01-13 17:54       ` Boris Brezillon
2016-01-13 17:54         ` Boris Brezillon
2016-01-23 20:44         ` Brian Norris
2016-01-23 20:44           ` Brian Norris
2016-01-13 16:34   ` [PATCH v1 2/5] mtd: atmel_nand: Support variable RB_EDGE interrupts Romain Izard
2016-01-13 16:34     ` Romain Izard
     [not found]     ` <1452702857-2240-3-git-send-email-romain.izard.pro-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-01-13 18:14       ` Boris Brezillon
2016-01-13 18:14         ` Boris Brezillon
2016-01-14 10:16         ` Romain Izard
2016-01-14 10:16           ` Romain Izard
     [not found]           ` <CAGkQfmMQTBVzOoE3BTyvg73NKjtGD_0veV_zb_jLutk-6bcqGw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-01-14 10:41             ` Boris Brezillon
2016-01-14 10:41               ` Boris Brezillon
2016-01-14  1:19       ` Rob Herring
2016-01-14  1:19         ` Rob Herring
2016-01-13 16:34   ` [PATCH v1 3/5] mtd: atmel_nand: Support PMECC on SAMA5D2 Romain Izard
2016-01-13 16:34     ` Romain Izard
     [not found]     ` <1452702857-2240-4-git-send-email-romain.izard.pro-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-01-14  1:12       ` Rob Herring
2016-01-14  1:12         ` Rob Herring
2016-01-14  1:17         ` Yang, Wenyou
2016-01-14  1:17           ` Yang, Wenyou
2016-01-14 13:14           ` Rob Herring
2016-01-14 13:14             ` Rob Herring
     [not found]             ` <CAL_JsqL9kbNYrGYeqT7QCsbMneJbPgoXfaHhCvL8S=t97YaCbg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-01-15  1:17               ` Yang, Wenyou
2016-01-15  1:17                 ` Yang, Wenyou
2016-01-15  8:54               ` Romain Izard
2016-01-15  8:54                 ` Romain Izard
     [not found]                 ` <CAGkQfmO94gQ61prZvF52=B_UtOTkbYxd5nnTmDhJam4q-n3T7g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-01-17  4:05                   ` Rob Herring
2016-01-17  4:05                     ` Rob Herring
2016-01-14  9:19       ` Boris Brezillon
2016-01-14  9:19         ` Boris Brezillon
2016-01-15 10:06         ` romain izard
2016-01-15 10:06           ` romain izard
2016-01-13 16:34   ` [PATCH v1 4/5] mtd: atmel_nand: Support 32-bit ECC strength Romain Izard
2016-01-13 16:34     ` Romain Izard
     [not found]     ` <1452702857-2240-5-git-send-email-romain.izard.pro-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-01-14  1:09       ` Rob Herring
2016-01-14  1:09         ` Rob Herring
2016-01-14  9:26       ` Boris Brezillon
2016-01-14  9:26         ` Boris Brezillon
2016-01-13 16:34   ` [PATCH v1 5/5] ARM: at91/dt: sama5d2: add nand0 and nfc0 nodes Romain Izard
2016-01-13 16:34     ` Romain Izard
     [not found]     ` <1452702857-2240-6-git-send-email-romain.izard.pro-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-01-13 17:04       ` Nicolas Ferre [this message]
2016-01-13 17:04         ` Nicolas Ferre
2016-01-13 17:04         ` Nicolas Ferre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56968399.5070706@atmel.com \
    --to=nicolas.ferre-aife0yeh4naavxtiumwx3w@public.gmane.org \
    --cc=Wenyou.Yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org \
    --cc=alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=rainyfeeling-1ViLX0X+lBJBDgjK7y7TUQ@public.gmane.org \
    --cc=romain.izard.pro-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.