All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Hans Verkuil <hans.verkuil@cisco.com>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	linux-media@vger.kernel.org, Andrzej Hajda <a.hajda@samsung.com>,
	Chen-Yu Tsai <wens@csie.org>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	Mark Rutland <mark.rutland@arm.com>,
	Rob Herring <robh+dt@kernel.org>,
	Frank Rowand <frowand.list@gmail.com>,
	Maxime Ripard <maxime.ripard@bootlin.com>
Subject: [PATCH v2 4/5] ARM: dts: sun7i: Add CSI0 controller
Date: Mon, 28 Jan 2019 15:52:35 +0100	[thread overview]
Message-ID: <574aa0fe62904094dc419894d6f9c3903ce29737.1548687041.git-series.maxime.ripard@bootlin.com> (raw)
In-Reply-To: <cover.ba7411f0c7155d0292b38d3dec698e26b5cc813b.1548687041.git-series.maxime.ripard@bootlin.com>

The CSI controller embedded in the A20 can be supported by our new driver.
Let's add it to our DT.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 arch/arm/boot/dts/sun7i-a20.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 641a8fa6d428..0eade0805fb0 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -376,6 +376,17 @@
 			num-cs = <1>;
 		};
 
+		csi0: csi@1c09000 {
+			compatible = "allwinner,sun7i-a20-csi0",
+				     "allwinner,sun4i-a10-csi0";
+			reg = <0x01c09000 0x1000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI0>,
+				 <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
+			clock-names = "bus", "mod", "isp", "ram";
+			resets = <&ccu RST_CSI0>;
+		};
+
 		emac: ethernet@1c0b000 {
 			compatible = "allwinner,sun4i-a10-emac";
 			reg = <0x01c0b000 0x1000>;
-- 
git-series 0.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Hans Verkuil <hans.verkuil@cisco.com>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	linux-kernel@vger.kernel.org, Andrzej Hajda <a.hajda@samsung.com>,
	Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Frank Rowand <frowand.list@gmail.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-media@vger.kernel.org
Subject: [PATCH v2 4/5] ARM: dts: sun7i: Add CSI0 controller
Date: Mon, 28 Jan 2019 15:52:35 +0100	[thread overview]
Message-ID: <574aa0fe62904094dc419894d6f9c3903ce29737.1548687041.git-series.maxime.ripard@bootlin.com> (raw)
In-Reply-To: <cover.ba7411f0c7155d0292b38d3dec698e26b5cc813b.1548687041.git-series.maxime.ripard@bootlin.com>

The CSI controller embedded in the A20 can be supported by our new driver.
Let's add it to our DT.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 arch/arm/boot/dts/sun7i-a20.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 641a8fa6d428..0eade0805fb0 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -376,6 +376,17 @@
 			num-cs = <1>;
 		};
 
+		csi0: csi@1c09000 {
+			compatible = "allwinner,sun7i-a20-csi0",
+				     "allwinner,sun4i-a10-csi0";
+			reg = <0x01c09000 0x1000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI0>,
+				 <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
+			clock-names = "bus", "mod", "isp", "ram";
+			resets = <&ccu RST_CSI0>;
+		};
+
 		emac: ethernet@1c0b000 {
 			compatible = "allwinner,sun4i-a10-emac";
 			reg = <0x01c0b000 0x1000>;
-- 
git-series 0.9.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-01-28 14:52 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-28 14:52 [PATCH v2 0/5] media: Allwinner A10 CSI support Maxime Ripard
2019-01-28 14:52 ` Maxime Ripard
2019-01-28 14:52 ` [PATCH v2 1/5] dt-bindings: media: Add Allwinner A10 CSI binding Maxime Ripard
2019-01-28 14:52   ` Maxime Ripard
2019-01-28 16:17   ` Rob Herring
2019-01-28 16:17     ` Rob Herring
2019-01-28 16:17     ` Rob Herring
2019-01-29 11:52   ` Sakari Ailus
2019-01-29 11:52     ` Sakari Ailus
2019-01-29 11:52     ` Sakari Ailus
2019-01-28 14:52 ` [PATCH v2 2/5] media: sunxi: Refactor the Makefile and Kconfig Maxime Ripard
2019-01-28 14:52   ` Maxime Ripard
2019-01-28 14:52   ` Maxime Ripard
2019-01-28 14:52 ` [PATCH v2 3/5] media: sunxi: Add A10 CSI driver Maxime Ripard
2019-01-28 14:52   ` Maxime Ripard
2019-01-29 12:39   ` Sakari Ailus
2019-01-29 12:39     ` Sakari Ailus
2019-02-06 21:16     ` Maxime Ripard
2019-02-06 21:16       ` Maxime Ripard
2019-02-08 23:17       ` Sakari Ailus
2019-02-08 23:17         ` Sakari Ailus
2019-02-06 22:59   ` Ezequiel Garcia
2019-02-06 22:59     ` Ezequiel Garcia
2019-02-08 20:19     ` Maxime Ripard
2019-02-08 20:19       ` Maxime Ripard
2019-01-28 14:52 ` Maxime Ripard [this message]
2019-01-28 14:52   ` [PATCH v2 4/5] ARM: dts: sun7i: Add CSI0 controller Maxime Ripard
2019-01-28 14:52 ` [PATCH v2 5/5] DO NOT MERGE: ARM: dts: bananapi: Add Camera support Maxime Ripard
2019-01-28 14:52   ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=574aa0fe62904094dc419894d6f9c3903ce29737.1548687041.git-series.maxime.ripard@bootlin.com \
    --to=maxime.ripard@bootlin.com \
    --cc=a.hajda@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=frowand.list@gmail.com \
    --cc=hans.verkuil@cisco.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mchehab@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.