* em28xx based USB Hybrid (Analog & DVB-T) TV Tuner not supported [not found] <6174dfda0911061223k75f31fd5je33a8e75e9e3c391@mail.gmail.com> @ 2009-11-06 20:58 ` Johan Mutsaerts 2009-11-07 1:16 ` Magnus Alm 0 siblings, 1 reply; 9+ messages in thread From: Johan Mutsaerts @ 2009-11-06 20:58 UTC (permalink / raw) To: linux-media [-- Attachment #1: Type: text/plain, Size: 508 bytes --] Hi, I have an iDream UTVHYL2 USB TV Tuner (with IR remote control) that I cannot get to work with Ubuntu (9.04, 2.6.28-16). I have successfully compiled and installed the em28xx-new driver from linuxtv.org. No /dev/dvb/adapter... is created and that is where it ends for me know. MyTV claims no adapter is detected. I have attached the output of lsusb and dmesg as requested... Please let me know what more I can do and what exactly it is you can do ? Thanks in advance and Best Regards, Johan (Belgium) [-- Attachment #2: lsusb.txt --] [-- Type: text/plain, Size: 544 bytes --] Bus 005 Device 002: ID 0b05:b700 ASUSTek Computer, Inc. Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 007: ID eb1a:2881 eMPIA Technology, Inc. Bus 001 Device 004: ID 04f2:b071 Chicony Electronics Co., Ltd Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 058f:6335 Alcor Micro Corp. [-- Attachment #3: dmesg_grep_em28xx.txt --] [-- Type: text/plain, Size: 16783 bytes --] [ 55.397398] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0) [ 55.397644] em28xx #0: chip ID is em2882/em2883 [ 55.479818] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00 [ 55.479839] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00 [ 55.479856] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 01 00 b8 00 00 00 5b 1e 00 00 [ 55.479873] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00 [ 55.479889] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 55.479906] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 55.479922] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00 [ 55.479938] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00 [ 55.479955] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00 [ 55.479971] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 55.479988] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 55.480579] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 55.480595] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 55.480612] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 55.480628] em28xx #0: i2c eeprom e0: 5a 00 55 aa ac 46 59 03 00 17 fc 01 00 00 00 00 [ 55.480645] em28xx #0: i2c eeprom f0: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 [ 55.480664] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xbd730120 [ 55.480668] em28xx #0: EEPROM info: [ 55.480671] em28xx #0: AC97 audio (5 sample rates) [ 55.480675] em28xx #0: USB Remote wakeup capable [ 55.480678] em28xx #0: 500mA max power [ 55.480683] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000 [ 55.494724] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1) [ 55.525723] em28xx #0: found i2c device @ 0xa0 [eeprom] [ 55.531251] em28xx #0: found i2c device @ 0xb8 [tvp5150a] [ 55.533597] em28xx #0: found i2c device @ 0xc2 [tuner (analog)] [ 55.545709] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected. [ 55.545724] em28xx #0: You may try to use card=<n> insmod option to workaround that. [ 55.545733] em28xx #0: Please send an email with this log to: [ 55.545740] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org> [ 55.545748] em28xx #0: Board eeprom hash is 0xbd730120 [ 55.545755] em28xx #0: Board i2c devicelist hash is 0x27e10080 [ 55.545762] em28xx #0: Here is a list of valid choices for the card=<n> insmod option: [ 55.545771] em28xx #0: card=0 -> Unknown EM2800 video grabber [ 55.545779] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber [ 55.545787] em28xx #0: card=2 -> Terratec Cinergy 250 USB [ 55.545794] em28xx #0: card=3 -> Pinnacle PCTV USB 2 [ 55.545801] em28xx #0: card=4 -> Hauppauge WinTV USB 2 [ 55.545808] em28xx #0: card=5 -> MSI VOX USB 2.0 [ 55.545815] em28xx #0: card=6 -> Terratec Cinergy 200 USB [ 55.545822] em28xx #0: card=7 -> Leadtek Winfast USB II [ 55.545829] em28xx #0: card=8 -> Kworld USB2800 [ 55.545837] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 [ 55.545847] em28xx #0: card=10 -> Hauppauge WinTV HVR 900 [ 55.545854] em28xx #0: card=11 -> Terratec Hybrid XS [ 55.545861] em28xx #0: card=12 -> Kworld PVR TV 2800 RF [ 55.545869] em28xx #0: card=13 -> Terratec Prodigy XS [ 55.545876] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 [ 55.545884] em28xx #0: card=15 -> V-Gear PocketTV [ 55.545891] em28xx #0: card=16 -> Hauppauge WinTV HVR 950 [ 55.545899] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick [ 55.545906] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2) [ 55.545914] em28xx #0: card=19 -> EM2860/SAA711X Reference Design [ 55.545921] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600 [ 55.545929] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder [ 55.545937] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber [ 55.545945] em28xx #0: card=23 -> Huaqi DLCW-130 [ 55.545952] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner [ 55.545959] em28xx #0: card=25 -> Gadmei UTV310 [ 55.545966] em28xx #0: card=26 -> Hercules Smart TV USB 2.0 [ 55.545974] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME) [ 55.545982] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe [ 55.545990] em28xx #0: card=29 -> <NULL> [ 55.546007] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0 [ 55.546012] em28xx #0: card=31 -> Usbgear VD204v9 [ 55.546016] em28xx #0: card=32 -> Supercomp USB 2.0 TV [ 55.546020] em28xx #0: card=33 -> <NULL> [ 55.546024] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS [ 55.546029] em28xx #0: card=35 -> Typhoon DVD Maker [ 55.546033] em28xx #0: card=36 -> NetGMBH Cam [ 55.546037] em28xx #0: card=37 -> Gadmei UTV330 [ 55.546041] em28xx #0: card=38 -> Yakumo MovieMixer [ 55.546045] em28xx #0: card=39 -> KWorld PVRTV 300U [ 55.546049] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U [ 55.546054] em28xx #0: card=41 -> Kworld 350 U DVB-T [ 55.546058] em28xx #0: card=42 -> Kworld 355 U DVB-T [ 55.546062] em28xx #0: card=43 -> Terratec Cinergy T XS [ 55.546067] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060) [ 55.546071] em28xx #0: card=45 -> Pinnacle PCTV DVB-T [ 55.546075] em28xx #0: card=46 -> Compro, VideoMate U3 [ 55.546080] em28xx #0: card=47 -> KWorld DVB-T 305U [ 55.546084] em28xx #0: card=48 -> KWorld DVB-T 310U [ 55.546088] em28xx #0: card=49 -> MSI DigiVox A/D [ 55.546092] em28xx #0: card=50 -> MSI DigiVox A/D II [ 55.546096] em28xx #0: card=51 -> Terratec Hybrid XS Secam [ 55.546101] em28xx #0: card=52 -> DNT DA2 Hybrid [ 55.546105] em28xx #0: card=53 -> Pinnacle Hybrid Pro [ 55.546109] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR [ 55.546113] em28xx #0: card=55 -> Terratec Hybrid XS (em2882) [ 55.546118] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2) [ 55.546122] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330 [ 55.546127] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo [ 55.546131] em28xx #0: card=59 -> <NULL> [ 55.546135] em28xx #0: card=60 -> Hauppauge WinTV HVR 850 [ 55.546139] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0 [ 55.546144] em28xx #0: card=62 -> Gadmei TVR200 [ 55.546148] em28xx #0: card=63 -> Kaiomy TVnPC U2 [ 55.546152] em28xx #0: card=64 -> Easy Cap Capture DC-60 [ 55.546156] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ [ 55.546160] em28xx #0: card=66 -> Empire dual TV [ 55.546164] em28xx #0: card=67 -> Terratec Grabby [ 55.546168] em28xx #0: card=68 -> Terratec AV350 [ 55.546173] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box [ 55.546177] em28xx #0: card=70 -> Evga inDtube [ 55.546181] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix [ 55.546186] em28xx #0: card=72 -> Gadmei UTV330+ [ 55.546190] em28xx #0: card=73 -> Reddo DVB-C USB TV Box [ 55.546452] em28xx #0: Config register raw data: 0x58 [ 55.547187] em28xx #0: AC97 vendor ID = 0x5baa5baa [ 55.547559] em28xx #0: AC97 features = 0x5baa [ 55.547567] em28xx #0: Unknown AC97 audio processor detected! [ 55.583918] em28xx #0: v4l2 driver version 0.1.2 [ 55.626119] em28xx #0: V4L2 video device registered as /dev/video1 [ 55.626127] em28xx #0: V4L2 VBI device registered as /dev/vbi0 [ 55.626163] em28xx audio device (eb1a:2881): interface 1, class 1 [ 55.626196] em28xx audio device (eb1a:2881): interface 2, class 1 [ 55.626250] usbcore: registered new interface driver em28xx [ 55.626261] em28xx driver loaded [ 1691.617074] em28xx #0: disconnecting em28xx #0 video [ 1691.617091] em28xx #0: V4L2 device /dev/vbi0 deregistered [ 1691.617244] em28xx #0: V4L2 device /dev/video1 deregistered [ 1711.553714] Modules linked in: snd_usb_audio snd_usb_lib snd_hwdep em28xx v4l2_common ir_common videobuf_vmalloc videobuf_core tveeprom i915 drm binfmt_misc ppdev bridge stp bnep input_polldev joydev lp parport snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm arc4 ecb snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event psmouse ath9k iTCO_wdt iTCO_vendor_support uvcvideo lbm_cw_mac80211 led_class pcspkr snd_seq serio_raw videodev v4l1_compat snd_timer snd_seq_device snd btusb lbm_cw_cfg80211 soundcore snd_page_alloc intel_agp agpgart video output eeepc_laptop atl1e usb_storage fbcon tileblit font bitblit softcursor [ 2140.841174] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0) [ 2140.841811] em28xx #0: chip ID is em2882/em2883 [ 2140.932102] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00 [ 2140.932138] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00 [ 2140.932166] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 01 00 b8 00 00 00 5b 1e 00 00 [ 2140.932194] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00 [ 2140.932221] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2140.932248] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2140.932275] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00 [ 2140.932303] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00 [ 2140.932330] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00 [ 2140.932358] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2140.932385] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2140.932412] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2140.932439] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2140.932465] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2140.932492] em28xx #0: i2c eeprom e0: 5a 00 55 aa ac 46 59 03 00 17 fc 01 00 00 00 00 [ 2140.932520] em28xx #0: i2c eeprom f0: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 [ 2140.932551] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xbd730120 [ 2140.932558] em28xx #0: EEPROM info: [ 2140.932564] em28xx #0: AC97 audio (5 sample rates) [ 2140.932570] em28xx #0: USB Remote wakeup capable [ 2140.932575] em28xx #0: 500mA max power [ 2140.932582] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000 [ 2140.933143] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1) [ 2140.985428] em28xx #0: found i2c device @ 0xa0 [eeprom] [ 2140.992654] em28xx #0: found i2c device @ 0xb8 [tvp5150a] [ 2141.008288] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected. [ 2141.008303] em28xx #0: You may try to use card=<n> insmod option to workaround that. [ 2141.008312] em28xx #0: Please send an email with this log to: [ 2141.008318] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org> [ 2141.008326] em28xx #0: Board eeprom hash is 0xbd730120 [ 2141.008333] em28xx #0: Board i2c devicelist hash is 0x27800080 [ 2141.008340] em28xx #0: Here is a list of valid choices for the card=<n> insmod option: [ 2141.008350] em28xx #0: card=0 -> Unknown EM2800 video grabber [ 2141.008358] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber [ 2141.008365] em28xx #0: card=2 -> Terratec Cinergy 250 USB [ 2141.008372] em28xx #0: card=3 -> Pinnacle PCTV USB 2 [ 2141.008379] em28xx #0: card=4 -> Hauppauge WinTV USB 2 [ 2141.008386] em28xx #0: card=5 -> MSI VOX USB 2.0 [ 2141.008393] em28xx #0: card=6 -> Terratec Cinergy 200 USB [ 2141.008400] em28xx #0: card=7 -> Leadtek Winfast USB II [ 2141.008407] em28xx #0: card=8 -> Kworld USB2800 [ 2141.008415] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 [ 2141.008425] em28xx #0: card=10 -> Hauppauge WinTV HVR 900 [ 2141.008432] em28xx #0: card=11 -> Terratec Hybrid XS [ 2141.008439] em28xx #0: card=12 -> Kworld PVR TV 2800 RF [ 2141.008446] em28xx #0: card=13 -> Terratec Prodigy XS [ 2141.008454] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 [ 2141.008462] em28xx #0: card=15 -> V-Gear PocketTV [ 2141.008469] em28xx #0: card=16 -> Hauppauge WinTV HVR 950 [ 2141.008476] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick [ 2141.008484] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2) [ 2141.008491] em28xx #0: card=19 -> EM2860/SAA711X Reference Design [ 2141.008499] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600 [ 2141.008506] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder [ 2141.008515] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber [ 2141.008522] em28xx #0: card=23 -> Huaqi DLCW-130 [ 2141.008529] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner [ 2141.008536] em28xx #0: card=25 -> Gadmei UTV310 [ 2141.008543] em28xx #0: card=26 -> Hercules Smart TV USB 2.0 [ 2141.008550] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME) [ 2141.008558] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe [ 2141.008566] em28xx #0: card=29 -> <NULL> [ 2141.008572] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0 [ 2141.008580] em28xx #0: card=31 -> Usbgear VD204v9 [ 2141.008586] em28xx #0: card=32 -> Supercomp USB 2.0 TV [ 2141.008593] em28xx #0: card=33 -> <NULL> [ 2141.008600] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS [ 2141.008607] em28xx #0: card=35 -> Typhoon DVD Maker [ 2141.008614] em28xx #0: card=36 -> NetGMBH Cam [ 2141.008621] em28xx #0: card=37 -> Gadmei UTV330 [ 2141.008627] em28xx #0: card=38 -> Yakumo MovieMixer [ 2141.008634] em28xx #0: card=39 -> KWorld PVRTV 300U [ 2141.008641] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U [ 2141.008648] em28xx #0: card=41 -> Kworld 350 U DVB-T [ 2141.008655] em28xx #0: card=42 -> Kworld 355 U DVB-T [ 2141.008662] em28xx #0: card=43 -> Terratec Cinergy T XS [ 2141.008670] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060) [ 2141.008677] em28xx #0: card=45 -> Pinnacle PCTV DVB-T [ 2141.008684] em28xx #0: card=46 -> Compro, VideoMate U3 [ 2141.008691] em28xx #0: card=47 -> KWorld DVB-T 305U [ 2141.008698] em28xx #0: card=48 -> KWorld DVB-T 310U [ 2141.008705] em28xx #0: card=49 -> MSI DigiVox A/D [ 2141.008711] em28xx #0: card=50 -> MSI DigiVox A/D II [ 2141.008718] em28xx #0: card=51 -> Terratec Hybrid XS Secam [ 2141.008725] em28xx #0: card=52 -> DNT DA2 Hybrid [ 2141.008732] em28xx #0: card=53 -> Pinnacle Hybrid Pro [ 2141.008739] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR [ 2141.008746] em28xx #0: card=55 -> Terratec Hybrid XS (em2882) [ 2141.008754] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2) [ 2141.008761] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330 [ 2141.008768] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo [ 2141.008776] em28xx #0: card=59 -> <NULL> [ 2141.008782] em28xx #0: card=60 -> Hauppauge WinTV HVR 850 [ 2141.008789] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0 [ 2141.008797] em28xx #0: card=62 -> Gadmei TVR200 [ 2141.008803] em28xx #0: card=63 -> Kaiomy TVnPC U2 [ 2141.008810] em28xx #0: card=64 -> Easy Cap Capture DC-60 [ 2141.008817] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ [ 2141.008824] em28xx #0: card=66 -> Empire dual TV [ 2141.008831] em28xx #0: card=67 -> Terratec Grabby [ 2141.008837] em28xx #0: card=68 -> Terratec AV350 [ 2141.008844] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box [ 2141.008852] em28xx #0: card=70 -> Evga inDtube [ 2141.008858] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix [ 2141.008866] em28xx #0: card=72 -> Gadmei UTV330+ [ 2141.008872] em28xx #0: card=73 -> Reddo DVB-C USB TV Box [ 2141.009059] em28xx #0: Config register raw data: 0x58 [ 2141.009777] em28xx #0: AC97 vendor ID = 0x5fab5fab [ 2141.010149] em28xx #0: AC97 features = 0x5fab [ 2141.010156] em28xx #0: Unknown AC97 audio processor detected! [ 2141.048907] em28xx #0: v4l2 driver version 0.1.2 [ 2141.097313] em28xx #0: V4L2 video device registered as /dev/video1 [ 2141.097327] em28xx #0: V4L2 VBI device registered as /dev/vbi0 [ 2141.097538] em28xx audio device (eb1a:2881): interface 1, class 1 ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: em28xx based USB Hybrid (Analog & DVB-T) TV Tuner not supported 2009-11-06 20:58 ` em28xx based USB Hybrid (Analog & DVB-T) TV Tuner not supported Johan Mutsaerts @ 2009-11-07 1:16 ` Magnus Alm [not found] ` <6174dfda0911070246v61b5b3f5rdea26406066e3fa4@mail.gmail.com> 0 siblings, 1 reply; 9+ messages in thread From: Magnus Alm @ 2009-11-07 1:16 UTC (permalink / raw) To: Johan Mutsaerts; +Cc: linux-media [-- Attachment #1: Type: text/plain, Size: 1650 bytes --] Hi! The dmesg didn't reveal what tuner your stick/card has, it's probably a XC2028/XC3028 or something like that. Easiest way to find out would be if you could open the cover and have a look inside. If you have access to windows and the pvr program that came with the tuner you could do a usb-sniff. http://www.pcausa.com/Utilities/UsbSnoop/ or http://benoit.papillault.free.fr/usbsnoop/ Switch between different inputs while doing the log, like "dvb", "analog" and if it has "svideo"/"composite" input. copy the windows log to unix and parse the output with parser.pl (I've added is as an attachment.) I think there is a new parser somewhere, but I forgot the name of it. I'm also not sure how I used it, but I think it was like this: perl parser.pl < "your_windows_log" > "parsed_log" That log is needed to find out what "gpio" your tuner needs for different settings. Don't be scared of the size of the windows log, it gets large, often a few hundred MB. The parsed log is much smaller, a few hundred KB. That is all I can think about atm. /Magnus Alm 2009/11/6 Johan Mutsaerts <johmut@gmail.com>: > Hi, > > I have an iDream UTVHYL2 USB TV Tuner (with IR remote control) that I > cannot get to work with Ubuntu (9.04, 2.6.28-16). I have successfully > compiled and installed the em28xx-new driver from linuxtv.org. No > /dev/dvb/adapter... is created and that is where it ends for me know. > MyTV claims no adapter is detected. > > I have attached the output of lsusb and dmesg as requested... > > Please let me know what more I can do and what exactly it is you can do ? > > Thanks in advance and > Best Regards, > Johan (Belgium) > [-- Attachment #2: parser.pl --] [-- Type: application/x-perl, Size: 5092 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
[parent not found: <6174dfda0911070246v61b5b3f5rdea26406066e3fa4@mail.gmail.com>]
* Re: em28xx based USB Hybrid (Analog & DVB-T) TV Tuner not supported [not found] ` <6174dfda0911070246v61b5b3f5rdea26406066e3fa4@mail.gmail.com> @ 2009-11-07 12:35 ` Magnus Alm 2009-11-07 13:03 ` Magnus Alm 2009-11-07 15:25 ` Devin Heitmueller 0 siblings, 2 replies; 9+ messages in thread From: Magnus Alm @ 2009-11-07 12:35 UTC (permalink / raw) To: Johan Mutsaerts; +Cc: linux-media Hi I read some where that trying different card types for a DVB tuner can potentially cause damage to them. You are probably right about the firmare. Do you have a link to the manufacture of your stick? I tried to google the name of it but couldn't found an exact match. The EM2881_BOARD_PINNACLE_HYBRID_PRO uses it's XC3028 to getter with a ZARLINK456 as you can see from the following line in em28xx-cards.c case EM2881_BOARD_PINNACLE_HYBRID_PRO: ctl->demod = XC3028_FE_ZARLINK456; break; It is probably not compliant with your Zarlink MT352. There is a mt352 module tho, but I guess it doesn't get loaded when you plug your stick in. I'll pooke around a bit..... PS Use the "reply all", so others can see your mails, since I'm probably one of the least competent guys/gals on this mailing list. DS 2009/11/7 Johan Mutsaerts <johmut@gmail.com>: > Hi Magnus, > > Thanks for a quick reply. Here is some more detailed information: > > My USB device ID is 0xeb1a:0x2881 it is eMPIA based. > > These are the components inside > - Empia EM2880 > - Texas Instruments 5150AM1 > - XCeive XC3028 > - Empia EMP202 > - Zarlink MT352 > > Difficult for me to get to the windows stuff.... > > No /dev/dvb/.... is generated ? Could it have something to do with no Firmware ? > > I found my device to be quite similar to the Pinnacle Hybrid Pro so I tried > sudo rmmod em28xx-dvb > sudo rmmod em28xx-alsa > sudo rmmod em28xx > sudo modprobe em28xx card=53 and card=56 > sudo modprobe em28xx-alsa > sudo modprobe em28xx-dvb > However with not much success. > Card=53 cased MeTV to see a tuner but no channels could be found.... > > TIA for any assistance you can provide. > > Best Regards, > Johan > > 2009/11/7 Magnus Alm <magnus.alm@gmail.com>: >> Hi! >> >> The dmesg didn't reveal what tuner your stick/card has, it's probably >> a XC2028/XC3028 or something like that. >> Easiest way to find out would be if you could open the cover and have >> a look inside. >> >> If you have access to windows and the pvr program that came with the >> tuner you could do a usb-sniff. >> >> http://www.pcausa.com/Utilities/UsbSnoop/ >> or >> http://benoit.papillault.free.fr/usbsnoop/ >> >> Switch between different inputs while doing the log, like "dvb", >> "analog" and if it has "svideo"/"composite" input. >> >> copy the windows log to unix and parse the output with parser.pl (I've >> added is as an attachment.) >> I think there is a new parser somewhere, but I forgot the name of it. >> >> I'm also not sure how I used it, but I think it was like this: perl >> parser.pl < "your_windows_log" > "parsed_log" >> That log is needed to find out what "gpio" your tuner needs for >> different settings. >> >> Don't be scared of the size of the windows log, it gets large, often a >> few hundred MB. >> The parsed log is much smaller, a few hundred KB. >> >> That is all I can think about atm. >> >> /Magnus Alm >> >> >> 2009/11/6 Johan Mutsaerts <johmut@gmail.com>: >>> Hi, >>> >>> I have an iDream UTVHYL2 USB TV Tuner (with IR remote control) that I >>> cannot get to work with Ubuntu (9.04, 2.6.28-16). I have successfully >>> compiled and installed the em28xx-new driver from linuxtv.org. No >>> /dev/dvb/adapter... is created and that is where it ends for me know. >>> MyTV claims no adapter is detected. >>> >>> I have attached the output of lsusb and dmesg as requested... >>> >>> Please let me know what more I can do and what exactly it is you can do ? >>> >>> Thanks in advance and >>> Best Regards, >>> Johan (Belgium) >>> >> > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: em28xx based USB Hybrid (Analog & DVB-T) TV Tuner not supported 2009-11-07 12:35 ` Magnus Alm @ 2009-11-07 13:03 ` Magnus Alm 2009-11-07 14:09 ` Magnus Alm 2009-11-07 15:25 ` Devin Heitmueller 1 sibling, 1 reply; 9+ messages in thread From: Magnus Alm @ 2009-11-07 13:03 UTC (permalink / raw) To: Johan Mutsaerts; +Cc: linux-media Well, maybe you where more right than me... >From em28xx-dvb.c case EM2880_BOARD_TERRATEC_HYBRID_XS: case EM2881_BOARD_PINNACLE_HYBRID_PRO: dvb->frontend = dvb_attach(zl10353_attach, &em28xx_zl10353_xc3028_no_i2c_gate, &dev->i2c_adap); if (dvb->frontend == NULL) { /* This board could have either a zl10353 or a mt352. If the chip id isn't for zl10353, try mt352 */ dvb->frontend = dvb_attach(mt352_attach, &terratec_xs_mt352_cfg, &dev->i2c_adap); } 2009/11/7 Magnus Alm <magnus.alm@gmail.com>: > Hi > > I read some where that trying different card types for a DVB tuner can > potentially cause damage to them. > > You are probably right about the firmare. > Do you have a link to the manufacture of your stick? > I tried to google the name of it but couldn't found an exact match. > > The EM2881_BOARD_PINNACLE_HYBRID_PRO uses it's XC3028 to getter with a > ZARLINK456 > as you can see from the following line in em28xx-cards.c > > case EM2881_BOARD_PINNACLE_HYBRID_PRO: > ctl->demod = XC3028_FE_ZARLINK456; > break; > > It is probably not compliant with your Zarlink MT352. > > There is a mt352 module tho, but I guess it doesn't get loaded when > you plug your stick in. > > I'll pooke around a bit..... > > PS > Use the "reply all", so others can see your mails, since I'm probably > one of the least competent guys/gals on this mailing list. > DS > > > > 2009/11/7 Johan Mutsaerts <johmut@gmail.com>: >> Hi Magnus, >> >> Thanks for a quick reply. Here is some more detailed information: >> >> My USB device ID is 0xeb1a:0x2881 it is eMPIA based. >> >> These are the components inside >> - Empia EM2880 >> - Texas Instruments 5150AM1 >> - XCeive XC3028 >> - Empia EMP202 >> - Zarlink MT352 >> >> Difficult for me to get to the windows stuff.... >> >> No /dev/dvb/.... is generated ? Could it have something to do with no Firmware ? >> >> I found my device to be quite similar to the Pinnacle Hybrid Pro so I tried >> sudo rmmod em28xx-dvb >> sudo rmmod em28xx-alsa >> sudo rmmod em28xx >> sudo modprobe em28xx card=53 and card=56 >> sudo modprobe em28xx-alsa >> sudo modprobe em28xx-dvb >> However with not much success. >> Card=53 cased MeTV to see a tuner but no channels could be found.... >> >> TIA for any assistance you can provide. >> >> Best Regards, >> Johan >> >> 2009/11/7 Magnus Alm <magnus.alm@gmail.com>: >>> Hi! >>> >>> The dmesg didn't reveal what tuner your stick/card has, it's probably >>> a XC2028/XC3028 or something like that. >>> Easiest way to find out would be if you could open the cover and have >>> a look inside. >>> >>> If you have access to windows and the pvr program that came with the >>> tuner you could do a usb-sniff. >>> >>> http://www.pcausa.com/Utilities/UsbSnoop/ >>> or >>> http://benoit.papillault.free.fr/usbsnoop/ >>> >>> Switch between different inputs while doing the log, like "dvb", >>> "analog" and if it has "svideo"/"composite" input. >>> >>> copy the windows log to unix and parse the output with parser.pl (I've >>> added is as an attachment.) >>> I think there is a new parser somewhere, but I forgot the name of it. >>> >>> I'm also not sure how I used it, but I think it was like this: perl >>> parser.pl < "your_windows_log" > "parsed_log" >>> That log is needed to find out what "gpio" your tuner needs for >>> different settings. >>> >>> Don't be scared of the size of the windows log, it gets large, often a >>> few hundred MB. >>> The parsed log is much smaller, a few hundred KB. >>> >>> That is all I can think about atm. >>> >>> /Magnus Alm >>> >>> >>> 2009/11/6 Johan Mutsaerts <johmut@gmail.com>: >>>> Hi, >>>> >>>> I have an iDream UTVHYL2 USB TV Tuner (with IR remote control) that I >>>> cannot get to work with Ubuntu (9.04, 2.6.28-16). I have successfully >>>> compiled and installed the em28xx-new driver from linuxtv.org. No >>>> /dev/dvb/adapter... is created and that is where it ends for me know. >>>> MyTV claims no adapter is detected. >>>> >>>> I have attached the output of lsusb and dmesg as requested... >>>> >>>> Please let me know what more I can do and what exactly it is you can do ? >>>> >>>> Thanks in advance and >>>> Best Regards, >>>> Johan (Belgium) >>>> >>> >> > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: em28xx based USB Hybrid (Analog & DVB-T) TV Tuner not supported 2009-11-07 13:03 ` Magnus Alm @ 2009-11-07 14:09 ` Magnus Alm 2009-11-07 15:21 ` Johan Mutsaerts 0 siblings, 1 reply; 9+ messages in thread From: Magnus Alm @ 2009-11-07 14:09 UTC (permalink / raw) To: Johan Mutsaerts; +Cc: linux-media I think your stick has more in common with EM2881_BOARD_DNT_DA2_HYBRID, dvb support hasn't been enabled for that tuner yet tho, only analog.. If you look at pdf for the utvhyl3 (seems like they removed the utvhyl2) http://idream.com.hk/consulter.php?pid=120&tab=6 And compares it with the DNT DA2 , http://www.dnt.de/neu/data/download/files/110/Prospekt%20-%20DA2%20Hybrid.pdf (only avalible in german tho) They even seem to have the same remote (doesn't mean they are identical tho.) /Magnus Alm 2009/11/7 Magnus Alm <magnus.alm@gmail.com>: > Well, maybe you where more right than me... > > From em28xx-dvb.c > > case EM2880_BOARD_TERRATEC_HYBRID_XS: > case EM2881_BOARD_PINNACLE_HYBRID_PRO: > dvb->frontend = dvb_attach(zl10353_attach, > &em28xx_zl10353_xc3028_no_i2c_gate, > &dev->i2c_adap); > if (dvb->frontend == NULL) { > /* This board could have either a zl10353 or a mt352. > If the chip id isn't for zl10353, try mt352 */ > dvb->frontend = dvb_attach(mt352_attach, > &terratec_xs_mt352_cfg, > &dev->i2c_adap); > } > > > 2009/11/7 Magnus Alm <magnus.alm@gmail.com>: >> Hi >> >> I read some where that trying different card types for a DVB tuner can >> potentially cause damage to them. >> >> You are probably right about the firmare. >> Do you have a link to the manufacture of your stick? >> I tried to google the name of it but couldn't found an exact match. >> >> The EM2881_BOARD_PINNACLE_HYBRID_PRO uses it's XC3028 to getter with a >> ZARLINK456 >> as you can see from the following line in em28xx-cards.c >> >> case EM2881_BOARD_PINNACLE_HYBRID_PRO: >> ctl->demod = XC3028_FE_ZARLINK456; >> break; >> >> It is probably not compliant with your Zarlink MT352. >> >> There is a mt352 module tho, but I guess it doesn't get loaded when >> you plug your stick in. >> >> I'll pooke around a bit..... >> >> PS >> Use the "reply all", so others can see your mails, since I'm probably >> one of the least competent guys/gals on this mailing list. >> DS >> >> >> >> 2009/11/7 Johan Mutsaerts <johmut@gmail.com>: >>> Hi Magnus, >>> >>> Thanks for a quick reply. Here is some more detailed information: >>> >>> My USB device ID is 0xeb1a:0x2881 it is eMPIA based. >>> >>> These are the components inside >>> - Empia EM2880 >>> - Texas Instruments 5150AM1 >>> - XCeive XC3028 >>> - Empia EMP202 >>> - Zarlink MT352 >>> >>> Difficult for me to get to the windows stuff.... >>> >>> No /dev/dvb/.... is generated ? Could it have something to do with no Firmware ? >>> >>> I found my device to be quite similar to the Pinnacle Hybrid Pro so I tried >>> sudo rmmod em28xx-dvb >>> sudo rmmod em28xx-alsa >>> sudo rmmod em28xx >>> sudo modprobe em28xx card=53 and card=56 >>> sudo modprobe em28xx-alsa >>> sudo modprobe em28xx-dvb >>> However with not much success. >>> Card=53 cased MeTV to see a tuner but no channels could be found.... >>> >>> TIA for any assistance you can provide. >>> >>> Best Regards, >>> Johan >>> >>> 2009/11/7 Magnus Alm <magnus.alm@gmail.com>: >>>> Hi! >>>> >>>> The dmesg didn't reveal what tuner your stick/card has, it's probably >>>> a XC2028/XC3028 or something like that. >>>> Easiest way to find out would be if you could open the cover and have >>>> a look inside. >>>> >>>> If you have access to windows and the pvr program that came with the >>>> tuner you could do a usb-sniff. >>>> >>>> http://www.pcausa.com/Utilities/UsbSnoop/ >>>> or >>>> http://benoit.papillault.free.fr/usbsnoop/ >>>> >>>> Switch between different inputs while doing the log, like "dvb", >>>> "analog" and if it has "svideo"/"composite" input. >>>> >>>> copy the windows log to unix and parse the output with parser.pl (I've >>>> added is as an attachment.) >>>> I think there is a new parser somewhere, but I forgot the name of it. >>>> >>>> I'm also not sure how I used it, but I think it was like this: perl >>>> parser.pl < "your_windows_log" > "parsed_log" >>>> That log is needed to find out what "gpio" your tuner needs for >>>> different settings. >>>> >>>> Don't be scared of the size of the windows log, it gets large, often a >>>> few hundred MB. >>>> The parsed log is much smaller, a few hundred KB. >>>> >>>> That is all I can think about atm. >>>> >>>> /Magnus Alm >>>> >>>> >>>> 2009/11/6 Johan Mutsaerts <johmut@gmail.com>: >>>>> Hi, >>>>> >>>>> I have an iDream UTVHYL2 USB TV Tuner (with IR remote control) that I >>>>> cannot get to work with Ubuntu (9.04, 2.6.28-16). I have successfully >>>>> compiled and installed the em28xx-new driver from linuxtv.org. No >>>>> /dev/dvb/adapter... is created and that is where it ends for me know. >>>>> MyTV claims no adapter is detected. >>>>> >>>>> I have attached the output of lsusb and dmesg as requested... >>>>> >>>>> Please let me know what more I can do and what exactly it is you can do ? >>>>> >>>>> Thanks in advance and >>>>> Best Regards, >>>>> Johan (Belgium) >>>>> >>>> >>> >> > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: em28xx based USB Hybrid (Analog & DVB-T) TV Tuner not supported 2009-11-07 14:09 ` Magnus Alm @ 2009-11-07 15:21 ` Johan Mutsaerts 0 siblings, 0 replies; 9+ messages in thread From: Johan Mutsaerts @ 2009-11-07 15:21 UTC (permalink / raw) To: Magnus Alm; +Cc: linux-media Hi, Seems like you are on a hot trail here ... Great ! What can I do to test your hypothesis on the EM2881_BOARD_DNT_DA2_HYBRID ? May be I can verify if analog works ? How are my chances in getting DVB supported ? TIA for your time and effort in helping out. Best Regards, Johan 2009/11/7 Magnus Alm <magnus.alm@gmail.com>: > I think your stick has more in common with > EM2881_BOARD_DNT_DA2_HYBRID, dvb support hasn't been enabled for that > tuner yet tho, only analog.. > > If you look at pdf for the utvhyl3 (seems like they removed the > utvhyl2) http://idream.com.hk/consulter.php?pid=120&tab=6 > And compares it with the DNT DA2 , > http://www.dnt.de/neu/data/download/files/110/Prospekt%20-%20DA2%20Hybrid.pdf > (only avalible in german tho) > They even seem to have the same remote (doesn't mean they are identical tho.) > > /Magnus Alm > > 2009/11/7 Magnus Alm <magnus.alm@gmail.com>: >> Well, maybe you where more right than me... >> >> From em28xx-dvb.c >> >> case EM2880_BOARD_TERRATEC_HYBRID_XS: >> case EM2881_BOARD_PINNACLE_HYBRID_PRO: >> dvb->frontend = dvb_attach(zl10353_attach, >> &em28xx_zl10353_xc3028_no_i2c_gate, >> &dev->i2c_adap); >> if (dvb->frontend == NULL) { >> /* This board could have either a zl10353 or a mt352. >> If the chip id isn't for zl10353, try mt352 */ >> dvb->frontend = dvb_attach(mt352_attach, >> &terratec_xs_mt352_cfg, >> &dev->i2c_adap); >> } >> >> >> 2009/11/7 Magnus Alm <magnus.alm@gmail.com>: >>> Hi >>> >>> I read some where that trying different card types for a DVB tuner can >>> potentially cause damage to them. >>> >>> You are probably right about the firmare. >>> Do you have a link to the manufacture of your stick? >>> I tried to google the name of it but couldn't found an exact match. >>> >>> The EM2881_BOARD_PINNACLE_HYBRID_PRO uses it's XC3028 to getter with a >>> ZARLINK456 >>> as you can see from the following line in em28xx-cards.c >>> >>> case EM2881_BOARD_PINNACLE_HYBRID_PRO: >>> ctl->demod = XC3028_FE_ZARLINK456; >>> break; >>> >>> It is probably not compliant with your Zarlink MT352. >>> >>> There is a mt352 module tho, but I guess it doesn't get loaded when >>> you plug your stick in. >>> >>> I'll pooke around a bit..... >>> >>> PS >>> Use the "reply all", so others can see your mails, since I'm probably >>> one of the least competent guys/gals on this mailing list. >>> DS >>> >>> >>> >>> 2009/11/7 Johan Mutsaerts <johmut@gmail.com>: >>>> Hi Magnus, >>>> >>>> Thanks for a quick reply. Here is some more detailed information: >>>> >>>> My USB device ID is 0xeb1a:0x2881 it is eMPIA based. >>>> >>>> These are the components inside >>>> - Empia EM2880 >>>> - Texas Instruments 5150AM1 >>>> - XCeive XC3028 >>>> - Empia EMP202 >>>> - Zarlink MT352 >>>> >>>> Difficult for me to get to the windows stuff.... >>>> >>>> No /dev/dvb/.... is generated ? Could it have something to do with no Firmware ? >>>> >>>> I found my device to be quite similar to the Pinnacle Hybrid Pro so I tried >>>> sudo rmmod em28xx-dvb >>>> sudo rmmod em28xx-alsa >>>> sudo rmmod em28xx >>>> sudo modprobe em28xx card=53 and card=56 >>>> sudo modprobe em28xx-alsa >>>> sudo modprobe em28xx-dvb >>>> However with not much success. >>>> Card=53 cased MeTV to see a tuner but no channels could be found.... >>>> >>>> TIA for any assistance you can provide. >>>> >>>> Best Regards, >>>> Johan >>>> >>>> 2009/11/7 Magnus Alm <magnus.alm@gmail.com>: >>>>> Hi! >>>>> >>>>> The dmesg didn't reveal what tuner your stick/card has, it's probably >>>>> a XC2028/XC3028 or something like that. >>>>> Easiest way to find out would be if you could open the cover and have >>>>> a look inside. >>>>> >>>>> If you have access to windows and the pvr program that came with the >>>>> tuner you could do a usb-sniff. >>>>> >>>>> http://www.pcausa.com/Utilities/UsbSnoop/ >>>>> or >>>>> http://benoit.papillault.free.fr/usbsnoop/ >>>>> >>>>> Switch between different inputs while doing the log, like "dvb", >>>>> "analog" and if it has "svideo"/"composite" input. >>>>> >>>>> copy the windows log to unix and parse the output with parser.pl (I've >>>>> added is as an attachment.) >>>>> I think there is a new parser somewhere, but I forgot the name of it. >>>>> >>>>> I'm also not sure how I used it, but I think it was like this: perl >>>>> parser.pl < "your_windows_log" > "parsed_log" >>>>> That log is needed to find out what "gpio" your tuner needs for >>>>> different settings. >>>>> >>>>> Don't be scared of the size of the windows log, it gets large, often a >>>>> few hundred MB. >>>>> The parsed log is much smaller, a few hundred KB. >>>>> >>>>> That is all I can think about atm. >>>>> >>>>> /Magnus Alm >>>>> >>>>> >>>>> 2009/11/6 Johan Mutsaerts <johmut@gmail.com>: >>>>>> Hi, >>>>>> >>>>>> I have an iDream UTVHYL2 USB TV Tuner (with IR remote control) that I >>>>>> cannot get to work with Ubuntu (9.04, 2.6.28-16). I have successfully >>>>>> compiled and installed the em28xx-new driver from linuxtv.org. No >>>>>> /dev/dvb/adapter... is created and that is where it ends for me know. >>>>>> MyTV claims no adapter is detected. >>>>>> >>>>>> I have attached the output of lsusb and dmesg as requested... >>>>>> >>>>>> Please let me know what more I can do and what exactly it is you can do ? >>>>>> >>>>>> Thanks in advance and >>>>>> Best Regards, >>>>>> Johan (Belgium) >>>>>> >>>>> >>>> >>> >> > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: em28xx based USB Hybrid (Analog & DVB-T) TV Tuner not supported 2009-11-07 12:35 ` Magnus Alm 2009-11-07 13:03 ` Magnus Alm @ 2009-11-07 15:25 ` Devin Heitmueller [not found] ` <6174dfda0911070731q535e9027q3a0feb483515436e@mail.gmail.com> 1 sibling, 1 reply; 9+ messages in thread From: Devin Heitmueller @ 2009-11-07 15:25 UTC (permalink / raw) To: Magnus Alm; +Cc: Johan Mutsaerts, linux-media On Sat, Nov 7, 2009 at 7:35 AM, Magnus Alm <magnus.alm@gmail.com> wrote: > Hi > > I read some where that trying different card types for a DVB tuner can > potentially cause damage to them. > > You are probably right about the firmare. > Do you have a link to the manufacture of your stick? > I tried to google the name of it but couldn't found an exact match. > > The EM2881_BOARD_PINNACLE_HYBRID_PRO uses it's XC3028 to getter with a > ZARLINK456 > as you can see from the following line in em28xx-cards.c > > case EM2881_BOARD_PINNACLE_HYBRID_PRO: > ctl->demod = XC3028_FE_ZARLINK456; > break; > > It is probably not compliant with your Zarlink MT352. > > There is a mt352 module tho, but I guess it doesn't get loaded when > you plug your stick in. > > I'll pooke around a bit..... > > PS > Use the "reply all", so others can see your mails, since I'm probably > one of the least competent guys/gals on this mailing list. > DS > > > > 2009/11/7 Johan Mutsaerts <johmut@gmail.com>: >> Hi Magnus, >> >> Thanks for a quick reply. Here is some more detailed information: >> >> My USB device ID is 0xeb1a:0x2881 it is eMPIA based. >> >> These are the components inside >> - Empia EM2880 >> - Texas Instruments 5150AM1 >> - XCeive XC3028 >> - Empia EMP202 >> - Zarlink MT352 >> >> Difficult for me to get to the windows stuff.... >> >> No /dev/dvb/.... is generated ? Could it have something to do with no Firmware ? >> >> I found my device to be quite similar to the Pinnacle Hybrid Pro so I tried >> sudo rmmod em28xx-dvb >> sudo rmmod em28xx-alsa >> sudo rmmod em28xx >> sudo modprobe em28xx card=53 and card=56 >> sudo modprobe em28xx-alsa >> sudo modprobe em28xx-dvb >> However with not much success. >> Card=53 cased MeTV to see a tuner but no channels could be found.... >> >> TIA for any assistance you can provide. >> >> Best Regards, >> Johan >> >> 2009/11/7 Magnus Alm <magnus.alm@gmail.com>: >>> Hi! >>> >>> The dmesg didn't reveal what tuner your stick/card has, it's probably >>> a XC2028/XC3028 or something like that. >>> Easiest way to find out would be if you could open the cover and have >>> a look inside. >>> >>> If you have access to windows and the pvr program that came with the >>> tuner you could do a usb-sniff. >>> >>> http://www.pcausa.com/Utilities/UsbSnoop/ >>> or >>> http://benoit.papillault.free.fr/usbsnoop/ >>> >>> Switch between different inputs while doing the log, like "dvb", >>> "analog" and if it has "svideo"/"composite" input. >>> >>> copy the windows log to unix and parse the output with parser.pl (I've >>> added is as an attachment.) >>> I think there is a new parser somewhere, but I forgot the name of it. >>> >>> I'm also not sure how I used it, but I think it was like this: perl >>> parser.pl < "your_windows_log" > "parsed_log" >>> That log is needed to find out what "gpio" your tuner needs for >>> different settings. >>> >>> Don't be scared of the size of the windows log, it gets large, often a >>> few hundred MB. >>> The parsed log is much smaller, a few hundred KB. >>> >>> That is all I can think about atm. >>> >>> /Magnus Alm >>> >>> >>> 2009/11/6 Johan Mutsaerts <johmut@gmail.com>: >>>> Hi, >>>> >>>> I have an iDream UTVHYL2 USB TV Tuner (with IR remote control) that I >>>> cannot get to work with Ubuntu (9.04, 2.6.28-16). I have successfully >>>> compiled and installed the em28xx-new driver from linuxtv.org. No >>>> /dev/dvb/adapter... is created and that is where it ends for me know. >>>> MyTV claims no adapter is detected. >>>> >>>> I have attached the output of lsusb and dmesg as requested... >>>> >>>> Please let me know what more I can do and what exactly it is you can do ? >>>> >>>> Thanks in advance and >>>> Best Regards, >>>> Johan (Belgium) I'm away from Internet access so I can't write an extended answer, but I can tell you that XC3028_FE_ZARLINK456 is appropriate for both the zarlink zl10353 and m352. Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com ^ permalink raw reply [flat|nested] 9+ messages in thread
[parent not found: <6174dfda0911070731q535e9027q3a0feb483515436e@mail.gmail.com>]
* Fwd: em28xx based USB Hybrid (Analog & DVB-T) TV Tuner not supported [not found] ` <6174dfda0911070731q535e9027q3a0feb483515436e@mail.gmail.com> @ 2009-11-07 15:34 ` Johan Mutsaerts 2009-11-07 16:20 ` Devin Heitmueller 1 sibling, 0 replies; 9+ messages in thread From: Johan Mutsaerts @ 2009-11-07 15:34 UTC (permalink / raw) To: Magnus Alm, linux-media; +Cc: dheitmueller Sorry, forgot to reply all.... ---------- Forwarded message ---------- From: Johan Mutsaerts <johmut@gmail.com> Date: 2009/11/7 Subject: Re: em28xx based USB Hybrid (Analog & DVB-T) TV Tuner not supported To: Devin Heitmueller <dheitmueller@kernellabs.com> Hi, Something caught my eye while examining em28xx-dvb.c #include "mt352.h" #include "mt352_priv.h" /* FIXME */ What's the FIXME about ? Could it be a clue ? What do you suggest I try/text ? Best Regards, Johan 2009/11/7 Devin Heitmueller <dheitmueller@kernellabs.com>: > On Sat, Nov 7, 2009 at 7:35 AM, Magnus Alm <magnus.alm@gmail.com> wrote: >> Hi >> >> I read some where that trying different card types for a DVB tuner can >> potentially cause damage to them. >> >> You are probably right about the firmare. >> Do you have a link to the manufacture of your stick? >> I tried to google the name of it but couldn't found an exact match. >> >> The EM2881_BOARD_PINNACLE_HYBRID_PRO uses it's XC3028 to getter with a >> ZARLINK456 >> as you can see from the following line in em28xx-cards.c >> >> case EM2881_BOARD_PINNACLE_HYBRID_PRO: >> ctl->demod = XC3028_FE_ZARLINK456; >> break; >> >> It is probably not compliant with your Zarlink MT352. >> >> There is a mt352 module tho, but I guess it doesn't get loaded when >> you plug your stick in. >> >> I'll pooke around a bit..... >> >> PS >> Use the "reply all", so others can see your mails, since I'm probably >> one of the least competent guys/gals on this mailing list. >> DS >> >> >> >> 2009/11/7 Johan Mutsaerts <johmut@gmail.com>: >>> Hi Magnus, >>> >>> Thanks for a quick reply. Here is some more detailed information: >>> >>> My USB device ID is 0xeb1a:0x2881 it is eMPIA based. >>> >>> These are the components inside >>> - Empia EM2880 >>> - Texas Instruments 5150AM1 >>> - XCeive XC3028 >>> - Empia EMP202 >>> - Zarlink MT352 >>> >>> Difficult for me to get to the windows stuff.... >>> >>> No /dev/dvb/.... is generated ? Could it have something to do with no Firmware ? >>> >>> I found my device to be quite similar to the Pinnacle Hybrid Pro so I tried >>> sudo rmmod em28xx-dvb >>> sudo rmmod em28xx-alsa >>> sudo rmmod em28xx >>> sudo modprobe em28xx card=53 and card=56 >>> sudo modprobe em28xx-alsa >>> sudo modprobe em28xx-dvb >>> However with not much success. >>> Card=53 cased MeTV to see a tuner but no channels could be found.... >>> >>> TIA for any assistance you can provide. >>> >>> Best Regards, >>> Johan >>> >>> 2009/11/7 Magnus Alm <magnus.alm@gmail.com>: >>>> Hi! >>>> >>>> The dmesg didn't reveal what tuner your stick/card has, it's probably >>>> a XC2028/XC3028 or something like that. >>>> Easiest way to find out would be if you could open the cover and have >>>> a look inside. >>>> >>>> If you have access to windows and the pvr program that came with the >>>> tuner you could do a usb-sniff. >>>> >>>> http://www.pcausa.com/Utilities/UsbSnoop/ >>>> or >>>> http://benoit.papillault.free.fr/usbsnoop/ >>>> >>>> Switch between different inputs while doing the log, like "dvb", >>>> "analog" and if it has "svideo"/"composite" input. >>>> >>>> copy the windows log to unix and parse the output with parser.pl (I've >>>> added is as an attachment.) >>>> I think there is a new parser somewhere, but I forgot the name of it. >>>> >>>> I'm also not sure how I used it, but I think it was like this: perl >>>> parser.pl < "your_windows_log" > "parsed_log" >>>> That log is needed to find out what "gpio" your tuner needs for >>>> different settings. >>>> >>>> Don't be scared of the size of the windows log, it gets large, often a >>>> few hundred MB. >>>> The parsed log is much smaller, a few hundred KB. >>>> >>>> That is all I can think about atm. >>>> >>>> /Magnus Alm >>>> >>>> >>>> 2009/11/6 Johan Mutsaerts <johmut@gmail.com>: >>>>> Hi, >>>>> >>>>> I have an iDream UTVHYL2 USB TV Tuner (with IR remote control) that I >>>>> cannot get to work with Ubuntu (9.04, 2.6.28-16). I have successfully >>>>> compiled and installed the em28xx-new driver from linuxtv.org. No >>>>> /dev/dvb/adapter... is created and that is where it ends for me know. >>>>> MyTV claims no adapter is detected. >>>>> >>>>> I have attached the output of lsusb and dmesg as requested... >>>>> >>>>> Please let me know what more I can do and what exactly it is you can do ? >>>>> >>>>> Thanks in advance and >>>>> Best Regards, >>>>> Johan (Belgium) > > I'm away from Internet access so I can't write an extended answer, but > I can tell you that XC3028_FE_ZARLINK456 is appropriate for both the > zarlink zl10353 and m352. > > Devin > > -- > Devin J. Heitmueller - Kernel Labs > http://www.kernellabs.com > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: em28xx based USB Hybrid (Analog & DVB-T) TV Tuner not supported [not found] ` <6174dfda0911070731q535e9027q3a0feb483515436e@mail.gmail.com> 2009-11-07 15:34 ` Fwd: " Johan Mutsaerts @ 2009-11-07 16:20 ` Devin Heitmueller 1 sibling, 0 replies; 9+ messages in thread From: Devin Heitmueller @ 2009-11-07 16:20 UTC (permalink / raw) To: Johan Mutsaerts, Linux Media Mailing List On Sat, Nov 7, 2009 at 10:31 AM, Johan Mutsaerts <johmut@gmail.com> wrote: > Hi, > > Something caught my eye while examining em28xx-dvb.c > > #include "mt352.h" > #include "mt352_priv.h" /* FIXME */ > > What's the FIXME about ? Could it be a clue ? > > What do you suggest I try/text ? Please don't top post. No, I just put that FIXME there because the driver really shouldn't be using the private headers. I'm actually not in front of the code right now, so I cannot provide any recommendations. I will be back home on Sunday though and at that point I can take a look at the code and offer some suggestions. Cheers, Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2009-11-07 16:27 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <6174dfda0911061223k75f31fd5je33a8e75e9e3c391@mail.gmail.com> 2009-11-06 20:58 ` em28xx based USB Hybrid (Analog & DVB-T) TV Tuner not supported Johan Mutsaerts 2009-11-07 1:16 ` Magnus Alm [not found] ` <6174dfda0911070246v61b5b3f5rdea26406066e3fa4@mail.gmail.com> 2009-11-07 12:35 ` Magnus Alm 2009-11-07 13:03 ` Magnus Alm 2009-11-07 14:09 ` Magnus Alm 2009-11-07 15:21 ` Johan Mutsaerts 2009-11-07 15:25 ` Devin Heitmueller [not found] ` <6174dfda0911070731q535e9027q3a0feb483515436e@mail.gmail.com> 2009-11-07 15:34 ` Fwd: " Johan Mutsaerts 2009-11-07 16:20 ` Devin Heitmueller
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.