* [PATCH] clk: rockchip: mark pclk_uart2 as critical on rk3328
@ 2020-07-08 14:45 ` Johan Jonker
0 siblings, 0 replies; 14+ messages in thread
From: Johan Jonker @ 2020-07-08 14:45 UTC (permalink / raw)
To: heiko
Cc: zhangqing, mturquette, sboyd, linux-clk, linux-arm-kernel,
linux-rockchip, linux-kernel
The rk3328 uart2 port is used as boot console and to debug.
During the boot pclk_uart2 is disabled by a clk_disable_unused
initcall. Fix the uart2 function by marking pclk_uart2
as critical on rk3328. Also add sclk_uart2 as that is needed
for the same DT node.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
drivers/clk/rockchip/clk-rk3328.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/clk/rockchip/clk-rk3328.c b/drivers/clk/rockchip/clk-rk3328.c
index c186a1985..cb7749cb7 100644
--- a/drivers/clk/rockchip/clk-rk3328.c
+++ b/drivers/clk/rockchip/clk-rk3328.c
@@ -875,6 +875,8 @@ static const char *const rk3328_critical_clocks[] __initconst = {
"aclk_gmac_niu",
"pclk_gmac_niu",
"pclk_phy_niu",
+ "pclk_uart2",
+ "sclk_uart2",
};
static void __init rk3328_clk_init(struct device_node *np)
--
2.11.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH] clk: rockchip: mark pclk_uart2 as critical on rk3328
@ 2020-07-08 14:45 ` Johan Jonker
0 siblings, 0 replies; 14+ messages in thread
From: Johan Jonker @ 2020-07-08 14:45 UTC (permalink / raw)
To: heiko
Cc: sboyd, mturquette, zhangqing, linux-kernel, linux-rockchip,
linux-clk, linux-arm-kernel
The rk3328 uart2 port is used as boot console and to debug.
During the boot pclk_uart2 is disabled by a clk_disable_unused
initcall. Fix the uart2 function by marking pclk_uart2
as critical on rk3328. Also add sclk_uart2 as that is needed
for the same DT node.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
drivers/clk/rockchip/clk-rk3328.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/clk/rockchip/clk-rk3328.c b/drivers/clk/rockchip/clk-rk3328.c
index c186a1985..cb7749cb7 100644
--- a/drivers/clk/rockchip/clk-rk3328.c
+++ b/drivers/clk/rockchip/clk-rk3328.c
@@ -875,6 +875,8 @@ static const char *const rk3328_critical_clocks[] __initconst = {
"aclk_gmac_niu",
"pclk_gmac_niu",
"pclk_phy_niu",
+ "pclk_uart2",
+ "sclk_uart2",
};
static void __init rk3328_clk_init(struct device_node *np)
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH] clk: rockchip: mark pclk_uart2 as critical on rk3328
2020-07-08 14:45 ` Johan Jonker
@ 2020-07-08 15:34 ` Robin Murphy
-1 siblings, 0 replies; 14+ messages in thread
From: Robin Murphy @ 2020-07-08 15:34 UTC (permalink / raw)
To: Johan Jonker, heiko
Cc: sboyd, mturquette, zhangqing, linux-kernel, linux-rockchip,
linux-clk, linux-arm-kernel
On 2020-07-08 15:45, Johan Jonker wrote:
> The rk3328 uart2 port is used as boot console and to debug.
> During the boot pclk_uart2 is disabled by a clk_disable_unused
> initcall. Fix the uart2 function by marking pclk_uart2
> as critical on rk3328. Also add sclk_uart2 as that is needed
> for the same DT node.
Hmm, given that those are named in the DT as the "baudclk" and
"apb_pclk" that dw8250_probe() explicitly claims, they really
shouldn't be unused :/
On my RK3328 box they appear to be prepared and enabled OK:
[robin@nemulon-9 ~]$ sudo grep uart2 /sys/kernel/debug/clk/clk_summary
sclk_uart2 1 1 0 24000000 0 0 50000
pclk_uart2 1 1 0 75000000 0 0 50000
...
Robin.
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> ---
> drivers/clk/rockchip/clk-rk3328.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/clk/rockchip/clk-rk3328.c b/drivers/clk/rockchip/clk-rk3328.c
> index c186a1985..cb7749cb7 100644
> --- a/drivers/clk/rockchip/clk-rk3328.c
> +++ b/drivers/clk/rockchip/clk-rk3328.c
> @@ -875,6 +875,8 @@ static const char *const rk3328_critical_clocks[] __initconst = {
> "aclk_gmac_niu",
> "pclk_gmac_niu",
> "pclk_phy_niu",
> + "pclk_uart2",
> + "sclk_uart2",
> };
>
> static void __init rk3328_clk_init(struct device_node *np)
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH] clk: rockchip: mark pclk_uart2 as critical on rk3328
@ 2020-07-08 15:34 ` Robin Murphy
0 siblings, 0 replies; 14+ messages in thread
From: Robin Murphy @ 2020-07-08 15:34 UTC (permalink / raw)
To: Johan Jonker, heiko
Cc: sboyd, mturquette, zhangqing, linux-kernel, linux-rockchip,
linux-clk, linux-arm-kernel
On 2020-07-08 15:45, Johan Jonker wrote:
> The rk3328 uart2 port is used as boot console and to debug.
> During the boot pclk_uart2 is disabled by a clk_disable_unused
> initcall. Fix the uart2 function by marking pclk_uart2
> as critical on rk3328. Also add sclk_uart2 as that is needed
> for the same DT node.
Hmm, given that those are named in the DT as the "baudclk" and
"apb_pclk" that dw8250_probe() explicitly claims, they really
shouldn't be unused :/
On my RK3328 box they appear to be prepared and enabled OK:
[robin@nemulon-9 ~]$ sudo grep uart2 /sys/kernel/debug/clk/clk_summary
sclk_uart2 1 1 0 24000000 0 0 50000
pclk_uart2 1 1 0 75000000 0 0 50000
...
Robin.
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> ---
> drivers/clk/rockchip/clk-rk3328.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/clk/rockchip/clk-rk3328.c b/drivers/clk/rockchip/clk-rk3328.c
> index c186a1985..cb7749cb7 100644
> --- a/drivers/clk/rockchip/clk-rk3328.c
> +++ b/drivers/clk/rockchip/clk-rk3328.c
> @@ -875,6 +875,8 @@ static const char *const rk3328_critical_clocks[] __initconst = {
> "aclk_gmac_niu",
> "pclk_gmac_niu",
> "pclk_phy_niu",
> + "pclk_uart2",
> + "sclk_uart2",
> };
>
> static void __init rk3328_clk_init(struct device_node *np)
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH] clk: rockchip: mark pclk_uart2 as critical on rk3328
2020-07-08 15:34 ` Robin Murphy
@ 2020-07-08 16:28 ` Johan Jonker
-1 siblings, 0 replies; 14+ messages in thread
From: Johan Jonker @ 2020-07-08 16:28 UTC (permalink / raw)
To: Robin Murphy, heiko
Cc: sboyd, mturquette, zhangqing, linux-kernel, linux-rockchip,
linux-clk, linux-arm-kernel
Hi Robin and others,
Just a clarification.
Test is done on rk3318 A95X Z2 that uses rk3328.dtsi.
Almost everything works fine now except for uart2.
Front display also works now with ported custom vfd driver for the
SM1628 clone used.
When I include a printk function for debugging in
clk_disable_unused_subtree I get this list of disabled clocks below.
Could you list the rk3328 clocks that are turned off? Is there a difference?
boot options including:
earlycon=uart8250,mmio32,0xff130000,keep
console=ttyS2,1500000n8
But the real console in which one can type ends up on ttyUSB0.
Without console defined in the command line it's only usb keyboard and
hdmi monitor. Output on ttyS2 stops right after:
[ 1.309231] C:pclk_uart2 -> pclk_bus
To see more I have to include clk_ignore_unused to the command line.
In clk-px30.c they also included pclk_uart2 to the critical list.
Could Elaine Zhang give more info on that?
Kind regards,
Johan Jonker
static void __init clk_disable_unused_subtree(struct clk_core *core)
{
struct clk_core *child;
unsigned long flags;
lockdep_assert_held(&prepare_lock);
hlist_for_each_entry(child, &core->children, child_node)
clk_disable_unused_subtree(child);
if (core->flags & CLK_OPS_PARENT_ENABLE)
clk_core_prepare_enable(core->parent);
if (clk_pm_runtime_get(core))
goto unprepare_out;
flags = clk_enable_lock();
if (core->enable_count)
goto unlock_out;
if (core->flags & CLK_IGNORE_UNUSED)
goto unlock_out;
/*
* some gate clocks have special needs during the disable-unused
* sequence. call .disable_unused if available, otherwise fall
* back to .disable
*/
if (clk_core_is_enabled(core)) {
trace_clk_disable(core);
////////////
// >>> Include debug here <<<
printk("C:%s -> %s\n", core->name, core->parent ? core->parent->name :
"*");
////////////
if (core->ops->disable_unused)
core->ops->disable_unused(core->hw);
else if (core->ops->disable)
core->ops->disable(core->hw);
trace_clk_disable_complete(core);
}
unlock_out:
clk_enable_unlock(flags);
clk_pm_runtime_put(core);
unprepare_out:
if (core->flags & CLK_OPS_PARENT_ENABLE)
clk_core_disable_unprepare(core->parent);
}
label kernel
kernel /Image-CLK
fdt /rk3318-a95x-z2-CYX-led.dtb
append root=/dev/mmcblk0p5 console=tty0 console=ttyUSB0,115200n8
console=ttyS2,1500000n8 initcall_debug=1 debug drm.debug=0xe
earlycon=uart8250,mmio32,0xff130000,keep swiotlb=1 kpti=0
no_console_suspend=1 consoleblank=0 rootwait
[ 1.282096] calling clk_disable_unused+0x0/0x110 @ 1
[ 1.282705] C:sclk_timer5 -> xin24m
[ 1.283115] C:sclk_timer4 -> xin24m
[ 1.283524] C:sclk_timer3 -> xin24m
[ 1.283932] C:sclk_timer2 -> xin24m
[ 1.284340] C:sclk_timer1 -> xin24m
[ 1.284748] C:sclk_timer0 -> xin24m
[ 1.285158] C:clk_otp -> xin24m
[ 1.285536] C:aclk_mac2io -> aclk_gmac
[ 1.286035] C:pclk_mac2io -> pclk_gmac
[ 1.286483] C:clk_rga -> gpll
[ 1.286834] C:aclk_gpu -> aclk_gpu_pre
[ 1.287284] C:aclk_tsp -> aclk_bus_pre
[ 1.287723] C:aclk_dcf -> aclk_bus_pre
[ 1.288162] C:pclk_acodecphy -> pclk_phy_pre
[ 1.295372] C:pclk_dcf -> pclk_bus
[ 1.309231] C:pclk_uart2 -> pclk_bus
[ 1.322902] C:pclk_uart1 -> pclk_bus
[ 1.329133] C:pclk_uart0 -> pclk_bus
[ 1.335230] C:pclk_spi -> pclk_bus
[ 1.341538] C:pclk_stimer -> pclk_bus
[ 1.341543] C:pclk_i2c3 -> pclk_bus
[ 1.341547] C:pclk_i2c2 -> pclk_bus
[ 1.341551] C:pclk_i2c1 -> pclk_bus
[ 1.341554] C:pclk_i2c0 -> pclk_bus
[ 1.341562] C:hclk_pdm -> hclk_bus_pre
[ 1.341566] C:hclk_crypto_slv -> hclk_bus_pre
[ 1.341574] C:hclk_crypto_mst -> hclk_bus_pre
[ 1.395518] C:hclk_tsp -> hclk_bus_pre
[ 1.401131] C:hclk_spdif_8ch -> hclk_bus_pre
[ 1.406791] C:hclk_i2s2_2ch -> hclk_bus_pre
[ 1.421229] C:hclk_i2s1_8ch -> hclk_bus_pre
[ 1.426642] C:hclk_i2s0_8ch -> hclk_bus_pre
[ 1.431878] C:clk_wifi -> cpll
[ 1.436987] C:sclk_vdec_core -> cpll
[ 1.442045] C:sclk_vdec_cabac -> cpll
[ 1.446982] C:aclk_rga -> aclk_rga_pre
[ 1.451825] C:aclk_hdcp -> aclk_vio_pre
[ 1.456574] C:aclk_cif -> aclk_vio_pre
[ 1.461226] C:aclk_iep -> aclk_vio_pre
[ 1.465794] C:pclk_hdcp -> hclk_vio_pre
[ 1.470401] C:hclk_hdcp -> hclk_vio_pre
[ 1.470406] C:hclk_rga -> hclk_vio_pre
[ 1.470411] C:hclk_cif -> hclk_vio_pre
[ 1.470415] C:hclk_iep -> hclk_vio_pre
[ 1.470424] C:clk_mac2io_out -> cpll
[ 1.470432] C:clk_mac2io_ref -> clk_mac2io
[ 1.470440] C:clk_mac2io_rx -> clk_mac2io
[ 1.507448] C:clk_mac2io_tx -> clk_mac2io
[ 1.511778] C:clk_mac2io_refout -> clk_mac2io
[ 1.516094] C:clk_mac2io_src -> cpll
[ 1.520315] C:clk_ref_usb3otg_src -> cpll
[ 1.524560] C:clk_sdmmc_ext -> cpll
[ 1.528701] C:hclk_sdmmc_ext -> hclk_peri
[ 1.532850] C:clk_cif_src -> cpll
[ 1.536945] C:sclk_venc_dsp -> cpll
[ 1.541006] C:sclk_venc_core -> cpll
[ 1.544972] C:aclk_h264 -> aclk_rkvenc
[ 1.548936] C:aclk_h265 -> aclk_rkvenc
[ 1.552794] C:hclk_h264 -> hclk_rkvenc
[ 1.556580] C:pclk_h265 -> hclk_rkvenc
[ 1.560373] C:aclk_rkvdec -> aclk_rkvdec_pre
[ 1.564227] C:hclk_rkvdec -> hclk_rkvdec_pre
[ 1.568096] C:clk_spi -> cpll
[ 1.571981] C:clk_crypto -> cpll
[ 1.575897] C:clk_i2c3 -> cpll
[ 1.579795] C:clk_i2c2 -> cpll
[ 1.583657] C:clk_i2c1 -> cpll
[ 1.587521] C:clk_i2c0 -> cpll
[ 1.591357] C:i2s2_out -> clk_i2s2
[ 1.595170] C:clk_i2s2 -> i2s2_pre
[ 1.599020] C:i2s1_out -> clk_i2s1
[ 1.602893] C:clk_i2s1 -> i2s1_pre
[ 1.606749] C:clk_i2s0 -> i2s0_pre
[ 1.610519] C:clk_tsp -> cpll
[ 1.614239] C:clk_pdm -> apll
[ 1.617877] C:clk_hsadc_tsp -> *
[ 1.621718] initcall clk_disable_unused+0x0/0x110 returned 0 after
331056 usecs
On 7/8/20 5:34 PM, Robin Murphy wrote:
> On 2020-07-08 15:45, Johan Jonker wrote:
>> The rk3328 uart2 port is used as boot console and to debug.
>> During the boot pclk_uart2 is disabled by a clk_disable_unused
>> initcall. Fix the uart2 function by marking pclk_uart2
>> as critical on rk3328. Also add sclk_uart2 as that is needed
>> for the same DT node.
>
> Hmm, given that those are named in the DT as the "baudclk" and
> "apb_pclk" that dw8250_probe() explicitly claims, they really
> shouldn't be unused :/
>
> On my RK3328 box they appear to be prepared and enabled OK:
>
> [robin@nemulon-9 ~]$ sudo grep uart2 /sys/kernel/debug/clk/clk_summary
> sclk_uart2 1 1 0 24000000 0 0 50000
> pclk_uart2 1 1 0 75000000 0 0 50000
> ...
>
> Robin.
>
>> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
>> ---
>> drivers/clk/rockchip/clk-rk3328.c | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/clk/rockchip/clk-rk3328.c b/drivers/clk/rockchip/clk-rk3328.c
>> index c186a1985..cb7749cb7 100644
>> --- a/drivers/clk/rockchip/clk-rk3328.c
>> +++ b/drivers/clk/rockchip/clk-rk3328.c
>> @@ -875,6 +875,8 @@ static const char *const rk3328_critical_clocks[] __initconst = {
>> "aclk_gmac_niu",
>> "pclk_gmac_niu",
>> "pclk_phy_niu",
>> + "pclk_uart2",
>> + "sclk_uart2",
>> };
>>
>> static void __init rk3328_clk_init(struct device_node *np)
>>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH] clk: rockchip: mark pclk_uart2 as critical on rk3328
@ 2020-07-08 16:28 ` Johan Jonker
0 siblings, 0 replies; 14+ messages in thread
From: Johan Jonker @ 2020-07-08 16:28 UTC (permalink / raw)
To: Robin Murphy, heiko
Cc: sboyd, mturquette, zhangqing, linux-kernel, linux-rockchip,
linux-clk, linux-arm-kernel
Hi Robin and others,
Just a clarification.
Test is done on rk3318 A95X Z2 that uses rk3328.dtsi.
Almost everything works fine now except for uart2.
Front display also works now with ported custom vfd driver for the
SM1628 clone used.
When I include a printk function for debugging in
clk_disable_unused_subtree I get this list of disabled clocks below.
Could you list the rk3328 clocks that are turned off? Is there a difference?
boot options including:
earlycon=uart8250,mmio32,0xff130000,keep
console=ttyS2,1500000n8
But the real console in which one can type ends up on ttyUSB0.
Without console defined in the command line it's only usb keyboard and
hdmi monitor. Output on ttyS2 stops right after:
[ 1.309231] C:pclk_uart2 -> pclk_bus
To see more I have to include clk_ignore_unused to the command line.
In clk-px30.c they also included pclk_uart2 to the critical list.
Could Elaine Zhang give more info on that?
Kind regards,
Johan Jonker
static void __init clk_disable_unused_subtree(struct clk_core *core)
{
struct clk_core *child;
unsigned long flags;
lockdep_assert_held(&prepare_lock);
hlist_for_each_entry(child, &core->children, child_node)
clk_disable_unused_subtree(child);
if (core->flags & CLK_OPS_PARENT_ENABLE)
clk_core_prepare_enable(core->parent);
if (clk_pm_runtime_get(core))
goto unprepare_out;
flags = clk_enable_lock();
if (core->enable_count)
goto unlock_out;
if (core->flags & CLK_IGNORE_UNUSED)
goto unlock_out;
/*
* some gate clocks have special needs during the disable-unused
* sequence. call .disable_unused if available, otherwise fall
* back to .disable
*/
if (clk_core_is_enabled(core)) {
trace_clk_disable(core);
////////////
// >>> Include debug here <<<
printk("C:%s -> %s\n", core->name, core->parent ? core->parent->name :
"*");
////////////
if (core->ops->disable_unused)
core->ops->disable_unused(core->hw);
else if (core->ops->disable)
core->ops->disable(core->hw);
trace_clk_disable_complete(core);
}
unlock_out:
clk_enable_unlock(flags);
clk_pm_runtime_put(core);
unprepare_out:
if (core->flags & CLK_OPS_PARENT_ENABLE)
clk_core_disable_unprepare(core->parent);
}
label kernel
kernel /Image-CLK
fdt /rk3318-a95x-z2-CYX-led.dtb
append root=/dev/mmcblk0p5 console=tty0 console=ttyUSB0,115200n8
console=ttyS2,1500000n8 initcall_debug=1 debug drm.debug=0xe
earlycon=uart8250,mmio32,0xff130000,keep swiotlb=1 kpti=0
no_console_suspend=1 consoleblank=0 rootwait
[ 1.282096] calling clk_disable_unused+0x0/0x110 @ 1
[ 1.282705] C:sclk_timer5 -> xin24m
[ 1.283115] C:sclk_timer4 -> xin24m
[ 1.283524] C:sclk_timer3 -> xin24m
[ 1.283932] C:sclk_timer2 -> xin24m
[ 1.284340] C:sclk_timer1 -> xin24m
[ 1.284748] C:sclk_timer0 -> xin24m
[ 1.285158] C:clk_otp -> xin24m
[ 1.285536] C:aclk_mac2io -> aclk_gmac
[ 1.286035] C:pclk_mac2io -> pclk_gmac
[ 1.286483] C:clk_rga -> gpll
[ 1.286834] C:aclk_gpu -> aclk_gpu_pre
[ 1.287284] C:aclk_tsp -> aclk_bus_pre
[ 1.287723] C:aclk_dcf -> aclk_bus_pre
[ 1.288162] C:pclk_acodecphy -> pclk_phy_pre
[ 1.295372] C:pclk_dcf -> pclk_bus
[ 1.309231] C:pclk_uart2 -> pclk_bus
[ 1.322902] C:pclk_uart1 -> pclk_bus
[ 1.329133] C:pclk_uart0 -> pclk_bus
[ 1.335230] C:pclk_spi -> pclk_bus
[ 1.341538] C:pclk_stimer -> pclk_bus
[ 1.341543] C:pclk_i2c3 -> pclk_bus
[ 1.341547] C:pclk_i2c2 -> pclk_bus
[ 1.341551] C:pclk_i2c1 -> pclk_bus
[ 1.341554] C:pclk_i2c0 -> pclk_bus
[ 1.341562] C:hclk_pdm -> hclk_bus_pre
[ 1.341566] C:hclk_crypto_slv -> hclk_bus_pre
[ 1.341574] C:hclk_crypto_mst -> hclk_bus_pre
[ 1.395518] C:hclk_tsp -> hclk_bus_pre
[ 1.401131] C:hclk_spdif_8ch -> hclk_bus_pre
[ 1.406791] C:hclk_i2s2_2ch -> hclk_bus_pre
[ 1.421229] C:hclk_i2s1_8ch -> hclk_bus_pre
[ 1.426642] C:hclk_i2s0_8ch -> hclk_bus_pre
[ 1.431878] C:clk_wifi -> cpll
[ 1.436987] C:sclk_vdec_core -> cpll
[ 1.442045] C:sclk_vdec_cabac -> cpll
[ 1.446982] C:aclk_rga -> aclk_rga_pre
[ 1.451825] C:aclk_hdcp -> aclk_vio_pre
[ 1.456574] C:aclk_cif -> aclk_vio_pre
[ 1.461226] C:aclk_iep -> aclk_vio_pre
[ 1.465794] C:pclk_hdcp -> hclk_vio_pre
[ 1.470401] C:hclk_hdcp -> hclk_vio_pre
[ 1.470406] C:hclk_rga -> hclk_vio_pre
[ 1.470411] C:hclk_cif -> hclk_vio_pre
[ 1.470415] C:hclk_iep -> hclk_vio_pre
[ 1.470424] C:clk_mac2io_out -> cpll
[ 1.470432] C:clk_mac2io_ref -> clk_mac2io
[ 1.470440] C:clk_mac2io_rx -> clk_mac2io
[ 1.507448] C:clk_mac2io_tx -> clk_mac2io
[ 1.511778] C:clk_mac2io_refout -> clk_mac2io
[ 1.516094] C:clk_mac2io_src -> cpll
[ 1.520315] C:clk_ref_usb3otg_src -> cpll
[ 1.524560] C:clk_sdmmc_ext -> cpll
[ 1.528701] C:hclk_sdmmc_ext -> hclk_peri
[ 1.532850] C:clk_cif_src -> cpll
[ 1.536945] C:sclk_venc_dsp -> cpll
[ 1.541006] C:sclk_venc_core -> cpll
[ 1.544972] C:aclk_h264 -> aclk_rkvenc
[ 1.548936] C:aclk_h265 -> aclk_rkvenc
[ 1.552794] C:hclk_h264 -> hclk_rkvenc
[ 1.556580] C:pclk_h265 -> hclk_rkvenc
[ 1.560373] C:aclk_rkvdec -> aclk_rkvdec_pre
[ 1.564227] C:hclk_rkvdec -> hclk_rkvdec_pre
[ 1.568096] C:clk_spi -> cpll
[ 1.571981] C:clk_crypto -> cpll
[ 1.575897] C:clk_i2c3 -> cpll
[ 1.579795] C:clk_i2c2 -> cpll
[ 1.583657] C:clk_i2c1 -> cpll
[ 1.587521] C:clk_i2c0 -> cpll
[ 1.591357] C:i2s2_out -> clk_i2s2
[ 1.595170] C:clk_i2s2 -> i2s2_pre
[ 1.599020] C:i2s1_out -> clk_i2s1
[ 1.602893] C:clk_i2s1 -> i2s1_pre
[ 1.606749] C:clk_i2s0 -> i2s0_pre
[ 1.610519] C:clk_tsp -> cpll
[ 1.614239] C:clk_pdm -> apll
[ 1.617877] C:clk_hsadc_tsp -> *
[ 1.621718] initcall clk_disable_unused+0x0/0x110 returned 0 after
331056 usecs
On 7/8/20 5:34 PM, Robin Murphy wrote:
> On 2020-07-08 15:45, Johan Jonker wrote:
>> The rk3328 uart2 port is used as boot console and to debug.
>> During the boot pclk_uart2 is disabled by a clk_disable_unused
>> initcall. Fix the uart2 function by marking pclk_uart2
>> as critical on rk3328. Also add sclk_uart2 as that is needed
>> for the same DT node.
>
> Hmm, given that those are named in the DT as the "baudclk" and
> "apb_pclk" that dw8250_probe() explicitly claims, they really
> shouldn't be unused :/
>
> On my RK3328 box they appear to be prepared and enabled OK:
>
> [robin@nemulon-9 ~]$ sudo grep uart2 /sys/kernel/debug/clk/clk_summary
> sclk_uart2 1 1 0 24000000 0 0 50000
> pclk_uart2 1 1 0 75000000 0 0 50000
> ...
>
> Robin.
>
>> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
>> ---
>> drivers/clk/rockchip/clk-rk3328.c | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/clk/rockchip/clk-rk3328.c b/drivers/clk/rockchip/clk-rk3328.c
>> index c186a1985..cb7749cb7 100644
>> --- a/drivers/clk/rockchip/clk-rk3328.c
>> +++ b/drivers/clk/rockchip/clk-rk3328.c
>> @@ -875,6 +875,8 @@ static const char *const rk3328_critical_clocks[] __initconst = {
>> "aclk_gmac_niu",
>> "pclk_gmac_niu",
>> "pclk_phy_niu",
>> + "pclk_uart2",
>> + "sclk_uart2",
>> };
>>
>> static void __init rk3328_clk_init(struct device_node *np)
>>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH] clk: rockchip: mark pclk_uart2 as critical on rk3328
2020-07-08 16:28 ` Johan Jonker
@ 2020-07-08 18:44 ` Robin Murphy
-1 siblings, 0 replies; 14+ messages in thread
From: Robin Murphy @ 2020-07-08 18:44 UTC (permalink / raw)
To: Johan Jonker, heiko
Cc: sboyd, mturquette, zhangqing, linux-kernel, linux-rockchip,
linux-clk, linux-arm-kernel
On 2020-07-08 17:28, Johan Jonker wrote:
> Hi Robin and others,
>
> Just a clarification.
> Test is done on rk3318 A95X Z2 that uses rk3328.dtsi.
> Almost everything works fine now except for uart2.
> Front display also works now with ported custom vfd driver for the
> SM1628 clone used.
>
> When I include a printk function for debugging in
> clk_disable_unused_subtree I get this list of disabled clocks below.
> Could you list the rk3328 clocks that are turned off? Is there a difference?
I couldn't be bothered to rebuild a modified kernel package, so I just
rebooted with "trace_event=clk_disable,clk_enable":
[robin@nemulon-9 ~]$ sudo grep uart /sys/kernel/debug/tracing/trace
<idle>-0 [000] d... 0.000000: clk_enable: clk_uart2_div
<idle>-0 [000] d... 0.000000: clk_enable: clk_uart2_frac
<idle>-0 [000] d... 0.000000: clk_disable: clk_uart2_frac
<idle>-0 [000] d... 0.000000: clk_disable: clk_uart2_div
<idle>-0 [000] d... 0.000000: clk_enable: clk_uart1_div
<idle>-0 [000] d... 0.000000: clk_enable: clk_uart1_frac
<idle>-0 [000] d... 0.000000: clk_disable: clk_uart1_frac
<idle>-0 [000] d... 0.000000: clk_disable: clk_uart1_div
<idle>-0 [000] d... 0.000000: clk_enable: clk_uart0_div
<idle>-0 [000] d... 0.000000: clk_enable: clk_uart0_frac
<idle>-0 [000] d... 0.000000: clk_disable: clk_uart0_frac
<idle>-0 [000] d... 0.000000: clk_disable: clk_uart0_div
swapper/0-1 [002] d... 5.397599: clk_enable: sclk_uart2
swapper/0-1 [002] d... 5.397619: clk_enable: pclk_uart2
swapper/0-1 [002] d... 5.398056: clk_disable: sclk_uart2
swapper/0-1 [002] d... 5.398081: clk_enable: sclk_uart2
swapper/0-1 [003] d... 5.716848: clk_disable: pclk_uart1
swapper/0-1 [003] d... 5.716850: clk_disable: pclk_uart0
swapper/0-1 [003] d... 5.718596: clk_disable: sclk_uart2
swapper/0-1 [003] d... 5.718612: clk_enable: sclk_uart2
(agetty)-554 [003] d... 12.662968: clk_disable: sclk_uart2
(agetty)-554 [003] d... 12.662995: clk_enable: sclk_uart2
This looks as I would expect - UART2 is the only one enabled in DT, so
pclk_uart2 gets enabled when the driver loads and stays that way, while
the events for pclk_uart{0,1} correlate with clk_disable_unused()
running at the final round of initcalls:
[ 5.398003] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 14, base_baud = 1500000) is a 16550A
[ 5.470655] printk: console [ttyS2] enabled
...
[ 5.756099] Run /init as init process
FWIW I have "earlycon=uart8250,mmio32,0xff130000" on my command line,
but no explicit console argument - that's going to ttyS2 by virtue of
the DT "stdout-path".
Robin.
> boot options including:
> earlycon=uart8250,mmio32,0xff130000,keep
> console=ttyS2,1500000n8
>
> But the real console in which one can type ends up on ttyUSB0.
> Without console defined in the command line it's only usb keyboard and
> hdmi monitor. Output on ttyS2 stops right after:
>
> [ 1.309231] C:pclk_uart2 -> pclk_bus
>
> To see more I have to include clk_ignore_unused to the command line.
> In clk-px30.c they also included pclk_uart2 to the critical list.
> Could Elaine Zhang give more info on that?
>
> Kind regards,
>
> Johan Jonker
>
> static void __init clk_disable_unused_subtree(struct clk_core *core)
> {
> struct clk_core *child;
> unsigned long flags;
>
> lockdep_assert_held(&prepare_lock);
>
> hlist_for_each_entry(child, &core->children, child_node)
> clk_disable_unused_subtree(child);
>
> if (core->flags & CLK_OPS_PARENT_ENABLE)
> clk_core_prepare_enable(core->parent);
>
> if (clk_pm_runtime_get(core))
> goto unprepare_out;
>
> flags = clk_enable_lock();
>
> if (core->enable_count)
> goto unlock_out;
>
> if (core->flags & CLK_IGNORE_UNUSED)
> goto unlock_out;
>
> /*
> * some gate clocks have special needs during the disable-unused
> * sequence. call .disable_unused if available, otherwise fall
> * back to .disable
> */
> if (clk_core_is_enabled(core)) {
> trace_clk_disable(core);
>
> ////////////
> // >>> Include debug here <<<
>
> printk("C:%s -> %s\n", core->name, core->parent ? core->parent->name :
> "*");
>
> ////////////
> if (core->ops->disable_unused)
> core->ops->disable_unused(core->hw);
> else if (core->ops->disable)
> core->ops->disable(core->hw);
> trace_clk_disable_complete(core);
> }
>
> unlock_out:
> clk_enable_unlock(flags);
> clk_pm_runtime_put(core);
> unprepare_out:
> if (core->flags & CLK_OPS_PARENT_ENABLE)
> clk_core_disable_unprepare(core->parent);
> }
>
>
> label kernel
> kernel /Image-CLK
> fdt /rk3318-a95x-z2-CYX-led.dtb
> append root=/dev/mmcblk0p5 console=tty0 console=ttyUSB0,115200n8
> console=ttyS2,1500000n8 initcall_debug=1 debug drm.debug=0xe
> earlycon=uart8250,mmio32,0xff130000,keep swiotlb=1 kpti=0
> no_console_suspend=1 consoleblank=0 rootwait
>
>
> [ 1.282096] calling clk_disable_unused+0x0/0x110 @ 1
> [ 1.282705] C:sclk_timer5 -> xin24m
> [ 1.283115] C:sclk_timer4 -> xin24m
> [ 1.283524] C:sclk_timer3 -> xin24m
> [ 1.283932] C:sclk_timer2 -> xin24m
> [ 1.284340] C:sclk_timer1 -> xin24m
> [ 1.284748] C:sclk_timer0 -> xin24m
> [ 1.285158] C:clk_otp -> xin24m
> [ 1.285536] C:aclk_mac2io -> aclk_gmac
> [ 1.286035] C:pclk_mac2io -> pclk_gmac
> [ 1.286483] C:clk_rga -> gpll
> [ 1.286834] C:aclk_gpu -> aclk_gpu_pre
> [ 1.287284] C:aclk_tsp -> aclk_bus_pre
> [ 1.287723] C:aclk_dcf -> aclk_bus_pre
> [ 1.288162] C:pclk_acodecphy -> pclk_phy_pre
> [ 1.295372] C:pclk_dcf -> pclk_bus
> [ 1.309231] C:pclk_uart2 -> pclk_bus
> [ 1.322902] C:pclk_uart1 -> pclk_bus
> [ 1.329133] C:pclk_uart0 -> pclk_bus
> [ 1.335230] C:pclk_spi -> pclk_bus
> [ 1.341538] C:pclk_stimer -> pclk_bus
> [ 1.341543] C:pclk_i2c3 -> pclk_bus
> [ 1.341547] C:pclk_i2c2 -> pclk_bus
> [ 1.341551] C:pclk_i2c1 -> pclk_bus
> [ 1.341554] C:pclk_i2c0 -> pclk_bus
> [ 1.341562] C:hclk_pdm -> hclk_bus_pre
> [ 1.341566] C:hclk_crypto_slv -> hclk_bus_pre
> [ 1.341574] C:hclk_crypto_mst -> hclk_bus_pre
> [ 1.395518] C:hclk_tsp -> hclk_bus_pre
> [ 1.401131] C:hclk_spdif_8ch -> hclk_bus_pre
> [ 1.406791] C:hclk_i2s2_2ch -> hclk_bus_pre
> [ 1.421229] C:hclk_i2s1_8ch -> hclk_bus_pre
> [ 1.426642] C:hclk_i2s0_8ch -> hclk_bus_pre
> [ 1.431878] C:clk_wifi -> cpll
> [ 1.436987] C:sclk_vdec_core -> cpll
> [ 1.442045] C:sclk_vdec_cabac -> cpll
> [ 1.446982] C:aclk_rga -> aclk_rga_pre
> [ 1.451825] C:aclk_hdcp -> aclk_vio_pre
> [ 1.456574] C:aclk_cif -> aclk_vio_pre
> [ 1.461226] C:aclk_iep -> aclk_vio_pre
> [ 1.465794] C:pclk_hdcp -> hclk_vio_pre
> [ 1.470401] C:hclk_hdcp -> hclk_vio_pre
> [ 1.470406] C:hclk_rga -> hclk_vio_pre
> [ 1.470411] C:hclk_cif -> hclk_vio_pre
> [ 1.470415] C:hclk_iep -> hclk_vio_pre
> [ 1.470424] C:clk_mac2io_out -> cpll
> [ 1.470432] C:clk_mac2io_ref -> clk_mac2io
> [ 1.470440] C:clk_mac2io_rx -> clk_mac2io
> [ 1.507448] C:clk_mac2io_tx -> clk_mac2io
> [ 1.511778] C:clk_mac2io_refout -> clk_mac2io
> [ 1.516094] C:clk_mac2io_src -> cpll
> [ 1.520315] C:clk_ref_usb3otg_src -> cpll
> [ 1.524560] C:clk_sdmmc_ext -> cpll
> [ 1.528701] C:hclk_sdmmc_ext -> hclk_peri
> [ 1.532850] C:clk_cif_src -> cpll
> [ 1.536945] C:sclk_venc_dsp -> cpll
> [ 1.541006] C:sclk_venc_core -> cpll
> [ 1.544972] C:aclk_h264 -> aclk_rkvenc
> [ 1.548936] C:aclk_h265 -> aclk_rkvenc
> [ 1.552794] C:hclk_h264 -> hclk_rkvenc
> [ 1.556580] C:pclk_h265 -> hclk_rkvenc
> [ 1.560373] C:aclk_rkvdec -> aclk_rkvdec_pre
> [ 1.564227] C:hclk_rkvdec -> hclk_rkvdec_pre
> [ 1.568096] C:clk_spi -> cpll
> [ 1.571981] C:clk_crypto -> cpll
> [ 1.575897] C:clk_i2c3 -> cpll
> [ 1.579795] C:clk_i2c2 -> cpll
> [ 1.583657] C:clk_i2c1 -> cpll
> [ 1.587521] C:clk_i2c0 -> cpll
> [ 1.591357] C:i2s2_out -> clk_i2s2
> [ 1.595170] C:clk_i2s2 -> i2s2_pre
> [ 1.599020] C:i2s1_out -> clk_i2s1
> [ 1.602893] C:clk_i2s1 -> i2s1_pre
> [ 1.606749] C:clk_i2s0 -> i2s0_pre
> [ 1.610519] C:clk_tsp -> cpll
> [ 1.614239] C:clk_pdm -> apll
> [ 1.617877] C:clk_hsadc_tsp -> *
> [ 1.621718] initcall clk_disable_unused+0x0/0x110 returned 0 after
> 331056 usecs
>
>
> On 7/8/20 5:34 PM, Robin Murphy wrote:
>> On 2020-07-08 15:45, Johan Jonker wrote:
>>> The rk3328 uart2 port is used as boot console and to debug.
>>> During the boot pclk_uart2 is disabled by a clk_disable_unused
>>> initcall. Fix the uart2 function by marking pclk_uart2
>>> as critical on rk3328. Also add sclk_uart2 as that is needed
>>> for the same DT node.
>>
>> Hmm, given that those are named in the DT as the "baudclk" and
>> "apb_pclk" that dw8250_probe() explicitly claims, they really
>> shouldn't be unused :/
>>
>> On my RK3328 box they appear to be prepared and enabled OK:
>>
>> [robin@nemulon-9 ~]$ sudo grep uart2 /sys/kernel/debug/clk/clk_summary
>> sclk_uart2 1 1 0 24000000 0 0 50000
>> pclk_uart2 1 1 0 75000000 0 0 50000
>> ...
>>
>> Robin.
>>
>>> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
>>> ---
>>> drivers/clk/rockchip/clk-rk3328.c | 2 ++
>>> 1 file changed, 2 insertions(+)
>>>
>>> diff --git a/drivers/clk/rockchip/clk-rk3328.c b/drivers/clk/rockchip/clk-rk3328.c
>>> index c186a1985..cb7749cb7 100644
>>> --- a/drivers/clk/rockchip/clk-rk3328.c
>>> +++ b/drivers/clk/rockchip/clk-rk3328.c
>>> @@ -875,6 +875,8 @@ static const char *const rk3328_critical_clocks[] __initconst = {
>>> "aclk_gmac_niu",
>>> "pclk_gmac_niu",
>>> "pclk_phy_niu",
>>> + "pclk_uart2",
>>> + "sclk_uart2",
>>> };
>>>
>>> static void __init rk3328_clk_init(struct device_node *np)
>>>
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH] clk: rockchip: mark pclk_uart2 as critical on rk3328
@ 2020-07-08 18:44 ` Robin Murphy
0 siblings, 0 replies; 14+ messages in thread
From: Robin Murphy @ 2020-07-08 18:44 UTC (permalink / raw)
To: Johan Jonker, heiko
Cc: sboyd, mturquette, zhangqing, linux-kernel, linux-rockchip,
linux-clk, linux-arm-kernel
On 2020-07-08 17:28, Johan Jonker wrote:
> Hi Robin and others,
>
> Just a clarification.
> Test is done on rk3318 A95X Z2 that uses rk3328.dtsi.
> Almost everything works fine now except for uart2.
> Front display also works now with ported custom vfd driver for the
> SM1628 clone used.
>
> When I include a printk function for debugging in
> clk_disable_unused_subtree I get this list of disabled clocks below.
> Could you list the rk3328 clocks that are turned off? Is there a difference?
I couldn't be bothered to rebuild a modified kernel package, so I just
rebooted with "trace_event=clk_disable,clk_enable":
[robin@nemulon-9 ~]$ sudo grep uart /sys/kernel/debug/tracing/trace
<idle>-0 [000] d... 0.000000: clk_enable: clk_uart2_div
<idle>-0 [000] d... 0.000000: clk_enable: clk_uart2_frac
<idle>-0 [000] d... 0.000000: clk_disable: clk_uart2_frac
<idle>-0 [000] d... 0.000000: clk_disable: clk_uart2_div
<idle>-0 [000] d... 0.000000: clk_enable: clk_uart1_div
<idle>-0 [000] d... 0.000000: clk_enable: clk_uart1_frac
<idle>-0 [000] d... 0.000000: clk_disable: clk_uart1_frac
<idle>-0 [000] d... 0.000000: clk_disable: clk_uart1_div
<idle>-0 [000] d... 0.000000: clk_enable: clk_uart0_div
<idle>-0 [000] d... 0.000000: clk_enable: clk_uart0_frac
<idle>-0 [000] d... 0.000000: clk_disable: clk_uart0_frac
<idle>-0 [000] d... 0.000000: clk_disable: clk_uart0_div
swapper/0-1 [002] d... 5.397599: clk_enable: sclk_uart2
swapper/0-1 [002] d... 5.397619: clk_enable: pclk_uart2
swapper/0-1 [002] d... 5.398056: clk_disable: sclk_uart2
swapper/0-1 [002] d... 5.398081: clk_enable: sclk_uart2
swapper/0-1 [003] d... 5.716848: clk_disable: pclk_uart1
swapper/0-1 [003] d... 5.716850: clk_disable: pclk_uart0
swapper/0-1 [003] d... 5.718596: clk_disable: sclk_uart2
swapper/0-1 [003] d... 5.718612: clk_enable: sclk_uart2
(agetty)-554 [003] d... 12.662968: clk_disable: sclk_uart2
(agetty)-554 [003] d... 12.662995: clk_enable: sclk_uart2
This looks as I would expect - UART2 is the only one enabled in DT, so
pclk_uart2 gets enabled when the driver loads and stays that way, while
the events for pclk_uart{0,1} correlate with clk_disable_unused()
running at the final round of initcalls:
[ 5.398003] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 14, base_baud = 1500000) is a 16550A
[ 5.470655] printk: console [ttyS2] enabled
...
[ 5.756099] Run /init as init process
FWIW I have "earlycon=uart8250,mmio32,0xff130000" on my command line,
but no explicit console argument - that's going to ttyS2 by virtue of
the DT "stdout-path".
Robin.
> boot options including:
> earlycon=uart8250,mmio32,0xff130000,keep
> console=ttyS2,1500000n8
>
> But the real console in which one can type ends up on ttyUSB0.
> Without console defined in the command line it's only usb keyboard and
> hdmi monitor. Output on ttyS2 stops right after:
>
> [ 1.309231] C:pclk_uart2 -> pclk_bus
>
> To see more I have to include clk_ignore_unused to the command line.
> In clk-px30.c they also included pclk_uart2 to the critical list.
> Could Elaine Zhang give more info on that?
>
> Kind regards,
>
> Johan Jonker
>
> static void __init clk_disable_unused_subtree(struct clk_core *core)
> {
> struct clk_core *child;
> unsigned long flags;
>
> lockdep_assert_held(&prepare_lock);
>
> hlist_for_each_entry(child, &core->children, child_node)
> clk_disable_unused_subtree(child);
>
> if (core->flags & CLK_OPS_PARENT_ENABLE)
> clk_core_prepare_enable(core->parent);
>
> if (clk_pm_runtime_get(core))
> goto unprepare_out;
>
> flags = clk_enable_lock();
>
> if (core->enable_count)
> goto unlock_out;
>
> if (core->flags & CLK_IGNORE_UNUSED)
> goto unlock_out;
>
> /*
> * some gate clocks have special needs during the disable-unused
> * sequence. call .disable_unused if available, otherwise fall
> * back to .disable
> */
> if (clk_core_is_enabled(core)) {
> trace_clk_disable(core);
>
> ////////////
> // >>> Include debug here <<<
>
> printk("C:%s -> %s\n", core->name, core->parent ? core->parent->name :
> "*");
>
> ////////////
> if (core->ops->disable_unused)
> core->ops->disable_unused(core->hw);
> else if (core->ops->disable)
> core->ops->disable(core->hw);
> trace_clk_disable_complete(core);
> }
>
> unlock_out:
> clk_enable_unlock(flags);
> clk_pm_runtime_put(core);
> unprepare_out:
> if (core->flags & CLK_OPS_PARENT_ENABLE)
> clk_core_disable_unprepare(core->parent);
> }
>
>
> label kernel
> kernel /Image-CLK
> fdt /rk3318-a95x-z2-CYX-led.dtb
> append root=/dev/mmcblk0p5 console=tty0 console=ttyUSB0,115200n8
> console=ttyS2,1500000n8 initcall_debug=1 debug drm.debug=0xe
> earlycon=uart8250,mmio32,0xff130000,keep swiotlb=1 kpti=0
> no_console_suspend=1 consoleblank=0 rootwait
>
>
> [ 1.282096] calling clk_disable_unused+0x0/0x110 @ 1
> [ 1.282705] C:sclk_timer5 -> xin24m
> [ 1.283115] C:sclk_timer4 -> xin24m
> [ 1.283524] C:sclk_timer3 -> xin24m
> [ 1.283932] C:sclk_timer2 -> xin24m
> [ 1.284340] C:sclk_timer1 -> xin24m
> [ 1.284748] C:sclk_timer0 -> xin24m
> [ 1.285158] C:clk_otp -> xin24m
> [ 1.285536] C:aclk_mac2io -> aclk_gmac
> [ 1.286035] C:pclk_mac2io -> pclk_gmac
> [ 1.286483] C:clk_rga -> gpll
> [ 1.286834] C:aclk_gpu -> aclk_gpu_pre
> [ 1.287284] C:aclk_tsp -> aclk_bus_pre
> [ 1.287723] C:aclk_dcf -> aclk_bus_pre
> [ 1.288162] C:pclk_acodecphy -> pclk_phy_pre
> [ 1.295372] C:pclk_dcf -> pclk_bus
> [ 1.309231] C:pclk_uart2 -> pclk_bus
> [ 1.322902] C:pclk_uart1 -> pclk_bus
> [ 1.329133] C:pclk_uart0 -> pclk_bus
> [ 1.335230] C:pclk_spi -> pclk_bus
> [ 1.341538] C:pclk_stimer -> pclk_bus
> [ 1.341543] C:pclk_i2c3 -> pclk_bus
> [ 1.341547] C:pclk_i2c2 -> pclk_bus
> [ 1.341551] C:pclk_i2c1 -> pclk_bus
> [ 1.341554] C:pclk_i2c0 -> pclk_bus
> [ 1.341562] C:hclk_pdm -> hclk_bus_pre
> [ 1.341566] C:hclk_crypto_slv -> hclk_bus_pre
> [ 1.341574] C:hclk_crypto_mst -> hclk_bus_pre
> [ 1.395518] C:hclk_tsp -> hclk_bus_pre
> [ 1.401131] C:hclk_spdif_8ch -> hclk_bus_pre
> [ 1.406791] C:hclk_i2s2_2ch -> hclk_bus_pre
> [ 1.421229] C:hclk_i2s1_8ch -> hclk_bus_pre
> [ 1.426642] C:hclk_i2s0_8ch -> hclk_bus_pre
> [ 1.431878] C:clk_wifi -> cpll
> [ 1.436987] C:sclk_vdec_core -> cpll
> [ 1.442045] C:sclk_vdec_cabac -> cpll
> [ 1.446982] C:aclk_rga -> aclk_rga_pre
> [ 1.451825] C:aclk_hdcp -> aclk_vio_pre
> [ 1.456574] C:aclk_cif -> aclk_vio_pre
> [ 1.461226] C:aclk_iep -> aclk_vio_pre
> [ 1.465794] C:pclk_hdcp -> hclk_vio_pre
> [ 1.470401] C:hclk_hdcp -> hclk_vio_pre
> [ 1.470406] C:hclk_rga -> hclk_vio_pre
> [ 1.470411] C:hclk_cif -> hclk_vio_pre
> [ 1.470415] C:hclk_iep -> hclk_vio_pre
> [ 1.470424] C:clk_mac2io_out -> cpll
> [ 1.470432] C:clk_mac2io_ref -> clk_mac2io
> [ 1.470440] C:clk_mac2io_rx -> clk_mac2io
> [ 1.507448] C:clk_mac2io_tx -> clk_mac2io
> [ 1.511778] C:clk_mac2io_refout -> clk_mac2io
> [ 1.516094] C:clk_mac2io_src -> cpll
> [ 1.520315] C:clk_ref_usb3otg_src -> cpll
> [ 1.524560] C:clk_sdmmc_ext -> cpll
> [ 1.528701] C:hclk_sdmmc_ext -> hclk_peri
> [ 1.532850] C:clk_cif_src -> cpll
> [ 1.536945] C:sclk_venc_dsp -> cpll
> [ 1.541006] C:sclk_venc_core -> cpll
> [ 1.544972] C:aclk_h264 -> aclk_rkvenc
> [ 1.548936] C:aclk_h265 -> aclk_rkvenc
> [ 1.552794] C:hclk_h264 -> hclk_rkvenc
> [ 1.556580] C:pclk_h265 -> hclk_rkvenc
> [ 1.560373] C:aclk_rkvdec -> aclk_rkvdec_pre
> [ 1.564227] C:hclk_rkvdec -> hclk_rkvdec_pre
> [ 1.568096] C:clk_spi -> cpll
> [ 1.571981] C:clk_crypto -> cpll
> [ 1.575897] C:clk_i2c3 -> cpll
> [ 1.579795] C:clk_i2c2 -> cpll
> [ 1.583657] C:clk_i2c1 -> cpll
> [ 1.587521] C:clk_i2c0 -> cpll
> [ 1.591357] C:i2s2_out -> clk_i2s2
> [ 1.595170] C:clk_i2s2 -> i2s2_pre
> [ 1.599020] C:i2s1_out -> clk_i2s1
> [ 1.602893] C:clk_i2s1 -> i2s1_pre
> [ 1.606749] C:clk_i2s0 -> i2s0_pre
> [ 1.610519] C:clk_tsp -> cpll
> [ 1.614239] C:clk_pdm -> apll
> [ 1.617877] C:clk_hsadc_tsp -> *
> [ 1.621718] initcall clk_disable_unused+0x0/0x110 returned 0 after
> 331056 usecs
>
>
> On 7/8/20 5:34 PM, Robin Murphy wrote:
>> On 2020-07-08 15:45, Johan Jonker wrote:
>>> The rk3328 uart2 port is used as boot console and to debug.
>>> During the boot pclk_uart2 is disabled by a clk_disable_unused
>>> initcall. Fix the uart2 function by marking pclk_uart2
>>> as critical on rk3328. Also add sclk_uart2 as that is needed
>>> for the same DT node.
>>
>> Hmm, given that those are named in the DT as the "baudclk" and
>> "apb_pclk" that dw8250_probe() explicitly claims, they really
>> shouldn't be unused :/
>>
>> On my RK3328 box they appear to be prepared and enabled OK:
>>
>> [robin@nemulon-9 ~]$ sudo grep uart2 /sys/kernel/debug/clk/clk_summary
>> sclk_uart2 1 1 0 24000000 0 0 50000
>> pclk_uart2 1 1 0 75000000 0 0 50000
>> ...
>>
>> Robin.
>>
>>> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
>>> ---
>>> drivers/clk/rockchip/clk-rk3328.c | 2 ++
>>> 1 file changed, 2 insertions(+)
>>>
>>> diff --git a/drivers/clk/rockchip/clk-rk3328.c b/drivers/clk/rockchip/clk-rk3328.c
>>> index c186a1985..cb7749cb7 100644
>>> --- a/drivers/clk/rockchip/clk-rk3328.c
>>> +++ b/drivers/clk/rockchip/clk-rk3328.c
>>> @@ -875,6 +875,8 @@ static const char *const rk3328_critical_clocks[] __initconst = {
>>> "aclk_gmac_niu",
>>> "pclk_gmac_niu",
>>> "pclk_phy_niu",
>>> + "pclk_uart2",
>>> + "sclk_uart2",
>>> };
>>>
>>> static void __init rk3328_clk_init(struct device_node *np)
>>>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH] clk: rockchip: mark pclk_uart2 as critical on rk3328
2020-07-08 14:45 ` Johan Jonker
@ 2020-07-09 1:32 ` elaine.zhang
-1 siblings, 0 replies; 14+ messages in thread
From: elaine.zhang @ 2020-07-09 1:32 UTC (permalink / raw)
To: Johan Jonker, heiko
Cc: mturquette, sboyd, linux-clk, linux-arm-kernel, linux-rockchip,
linux-kernel
在 2020/7/8 下午10:45, Johan Jonker 写道:
> The rk3328 uart2 port is used as boot console and to debug.
> During the boot pclk_uart2 is disabled by a clk_disable_unused
> initcall. Fix the uart2 function by marking pclk_uart2
> as critical on rk3328. Also add sclk_uart2 as that is needed
> for the same DT node.
>
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> ---
> drivers/clk/rockchip/clk-rk3328.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/clk/rockchip/clk-rk3328.c b/drivers/clk/rockchip/clk-rk3328.c
> index c186a1985..cb7749cb7 100644
> --- a/drivers/clk/rockchip/clk-rk3328.c
> +++ b/drivers/clk/rockchip/clk-rk3328.c
> @@ -875,6 +875,8 @@ static const char *const rk3328_critical_clocks[] __initconst = {
> "aclk_gmac_niu",
> "pclk_gmac_niu",
> "pclk_phy_niu",
> + "pclk_uart2",
> + "sclk_uart2",
> };
>
Not need to mark the uart2 as critical clocks, the uart clk will enabled
by uart driver probe(dw8250_probe()).
For your question, Please check the uart2 dts node "status = okay".
Or You can send me the complete log, I check the status of uart2.
> static void __init rk3328_clk_init(struct device_node *np)
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH] clk: rockchip: mark pclk_uart2 as critical on rk3328
@ 2020-07-09 1:32 ` elaine.zhang
0 siblings, 0 replies; 14+ messages in thread
From: elaine.zhang @ 2020-07-09 1:32 UTC (permalink / raw)
To: Johan Jonker, heiko
Cc: sboyd, mturquette, linux-kernel, linux-rockchip, linux-clk,
linux-arm-kernel
在 2020/7/8 下午10:45, Johan Jonker 写道:
> The rk3328 uart2 port is used as boot console and to debug.
> During the boot pclk_uart2 is disabled by a clk_disable_unused
> initcall. Fix the uart2 function by marking pclk_uart2
> as critical on rk3328. Also add sclk_uart2 as that is needed
> for the same DT node.
>
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> ---
> drivers/clk/rockchip/clk-rk3328.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/clk/rockchip/clk-rk3328.c b/drivers/clk/rockchip/clk-rk3328.c
> index c186a1985..cb7749cb7 100644
> --- a/drivers/clk/rockchip/clk-rk3328.c
> +++ b/drivers/clk/rockchip/clk-rk3328.c
> @@ -875,6 +875,8 @@ static const char *const rk3328_critical_clocks[] __initconst = {
> "aclk_gmac_niu",
> "pclk_gmac_niu",
> "pclk_phy_niu",
> + "pclk_uart2",
> + "sclk_uart2",
> };
>
Not need to mark the uart2 as critical clocks, the uart clk will enabled
by uart driver probe(dw8250_probe()).
For your question, Please check the uart2 dts node "status = okay".
Or You can send me the complete log, I check the status of uart2.
> static void __init rk3328_clk_init(struct device_node *np)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH] clk: rockchip: mark pclk_uart2 as critical on rk3328
2020-07-09 1:32 ` elaine.zhang
@ 2020-07-09 12:04 ` Johan Jonker
-1 siblings, 0 replies; 14+ messages in thread
From: Johan Jonker @ 2020-07-09 12:04 UTC (permalink / raw)
To: elaine.zhang, heiko
Cc: mturquette, sboyd, linux-clk, linux-arm-kernel, linux-rockchip,
linux-kernel, Robin Murphy
Hi Elaine, Robin,
Thank you for your help!
This patch can go in the garbage bin.
It turns out that with SERIAL_8250 also SERIAL_8250_DW must be
selected... ;)
It's not in the Kconfig help description.
Shouldn't that be automatically be included for Rockchip?
Example:
config SERIAL_8250
tristate "8250/16550 and compatible serial support"
depends on !S390
select SERIAL_CORE
select SERIAL_MCTRL_GPIO if GPIOLIB
select SERIAL_8250_DW if ARCH_ROCKCHIP
Thank Robin for the introduction to FTRACE!
mount -t tracefs tracefs /sys/kernel/tracing
cd /sys/kernel/tracing
# Without SERIAL_8250_DW
/sys/kernel/tracing # cat trace | grep uart2
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_div
swapper/0-1 [002] d..1 1.916746: clk_disable: pclk_uart2
/sys/kernel/tracing # cat trace | grep uart
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart1_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart1_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart1_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart1_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart0_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart0_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart0_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart0_div
swapper/0-1 [002] d..1 1.916746: clk_disable: pclk_uart2
swapper/0-1 [002] d..1 1.923959: clk_disable: pclk_uart1
swapper/0-1 [002] d..1 1.930741: clk_disable: pclk_uart0
# With SERIAL_8250_DW
/sys/kernel/tracing # cat trace | grep uart2
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_div
swapper/0-1 [002] d..1 0.923180: clk_enable: sclk_uart2
swapper/0-1 [002] d..1 0.923224: clk_enable: pclk_uart2
swapper/0-1 [002] d..1 0.925259: clk_disable: sclk_uart2
swapper/0-1 [002] d..1 0.925295: clk_enable: sclk_uart2
swapper/0-1 [003] d..1 2.208605: clk_disable: sclk_uart2
swapper/0-1 [003] d..1 2.208646: clk_enable: sclk_uart2
/sys/kernel/tracing # cat trace | grep uart
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart1_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart1_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart1_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart1_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart0_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart0_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart0_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart0_div
swapper/0-1 [002] d..1 0.920034: clk_enable: sclk_uart0
swapper/0-1 [002] d..1 0.920085: clk_enable: pclk_uart0
kworker/2:1-32 [002] d..1 0.922596: clk_disable: sclk_uart0
kworker/2:1-32 [002] d..1 0.922613: clk_disable: pclk_uart0
swapper/0-1 [002] d..1 0.923180: clk_enable: sclk_uart2
swapper/0-1 [002] d..1 0.923224: clk_enable: pclk_uart2
swapper/0-1 [002] d..1 0.925259: clk_disable: sclk_uart2
swapper/0-1 [002] d..1 0.925295: clk_enable: sclk_uart2
swapper/0-1 [003] d..1 1.914158: clk_disable: pclk_uart1
swapper/0-1 [003] d..1 2.208605: clk_disable: sclk_uart2
swapper/0-1 [003] d..1 2.208646: clk_enable: sclk_uart2
On 7/9/20 3:32 AM, elaine.zhang wrote:
> 在 2020/7/8 下午10:45, Johan Jonker 写道:
>> The rk3328 uart2 port is used as boot console and to debug.
>> During the boot pclk_uart2 is disabled by a clk_disable_unused
>> initcall. Fix the uart2 function by marking pclk_uart2
>> as critical on rk3328. Also add sclk_uart2 as that is needed
>> for the same DT node.
>>
>> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
>> ---
>> drivers/clk/rockchip/clk-rk3328.c | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/clk/rockchip/clk-rk3328.c
>> b/drivers/clk/rockchip/clk-rk3328.c
>> index c186a1985..cb7749cb7 100644
>> --- a/drivers/clk/rockchip/clk-rk3328.c
>> +++ b/drivers/clk/rockchip/clk-rk3328.c
>> @@ -875,6 +875,8 @@ static const char *const rk3328_critical_clocks[]
>> __initconst = {
>> "aclk_gmac_niu",
>> "pclk_gmac_niu",
>> "pclk_phy_niu",
>> + "pclk_uart2",
>> + "sclk_uart2",
>> };
>>
>
> Not need to mark the uart2 as critical clocks, the uart clk will enabled
> by uart driver probe(dw8250_probe()).
>
> For your question, Please check the uart2 dts node "status = okay".
>
> Or You can send me the complete log, I check the status of uart2.
>
>> static void __init rk3328_clk_init(struct device_node *np)
>
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH] clk: rockchip: mark pclk_uart2 as critical on rk3328
@ 2020-07-09 12:04 ` Johan Jonker
0 siblings, 0 replies; 14+ messages in thread
From: Johan Jonker @ 2020-07-09 12:04 UTC (permalink / raw)
To: elaine.zhang, heiko
Cc: sboyd, mturquette, linux-kernel, linux-rockchip, Robin Murphy,
linux-clk, linux-arm-kernel
Hi Elaine, Robin,
Thank you for your help!
This patch can go in the garbage bin.
It turns out that with SERIAL_8250 also SERIAL_8250_DW must be
selected... ;)
It's not in the Kconfig help description.
Shouldn't that be automatically be included for Rockchip?
Example:
config SERIAL_8250
tristate "8250/16550 and compatible serial support"
depends on !S390
select SERIAL_CORE
select SERIAL_MCTRL_GPIO if GPIOLIB
select SERIAL_8250_DW if ARCH_ROCKCHIP
Thank Robin for the introduction to FTRACE!
mount -t tracefs tracefs /sys/kernel/tracing
cd /sys/kernel/tracing
# Without SERIAL_8250_DW
/sys/kernel/tracing # cat trace | grep uart2
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_div
swapper/0-1 [002] d..1 1.916746: clk_disable: pclk_uart2
/sys/kernel/tracing # cat trace | grep uart
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart1_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart1_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart1_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart1_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart0_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart0_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart0_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart0_div
swapper/0-1 [002] d..1 1.916746: clk_disable: pclk_uart2
swapper/0-1 [002] d..1 1.923959: clk_disable: pclk_uart1
swapper/0-1 [002] d..1 1.930741: clk_disable: pclk_uart0
# With SERIAL_8250_DW
/sys/kernel/tracing # cat trace | grep uart2
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_div
swapper/0-1 [002] d..1 0.923180: clk_enable: sclk_uart2
swapper/0-1 [002] d..1 0.923224: clk_enable: pclk_uart2
swapper/0-1 [002] d..1 0.925259: clk_disable: sclk_uart2
swapper/0-1 [002] d..1 0.925295: clk_enable: sclk_uart2
swapper/0-1 [003] d..1 2.208605: clk_disable: sclk_uart2
swapper/0-1 [003] d..1 2.208646: clk_enable: sclk_uart2
/sys/kernel/tracing # cat trace | grep uart
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart1_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart1_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart1_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart1_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart0_div
<idle>-0 [000] d..2 0.000000: clk_enable: clk_uart0_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart0_frac
<idle>-0 [000] d..2 0.000000: clk_disable: clk_uart0_div
swapper/0-1 [002] d..1 0.920034: clk_enable: sclk_uart0
swapper/0-1 [002] d..1 0.920085: clk_enable: pclk_uart0
kworker/2:1-32 [002] d..1 0.922596: clk_disable: sclk_uart0
kworker/2:1-32 [002] d..1 0.922613: clk_disable: pclk_uart0
swapper/0-1 [002] d..1 0.923180: clk_enable: sclk_uart2
swapper/0-1 [002] d..1 0.923224: clk_enable: pclk_uart2
swapper/0-1 [002] d..1 0.925259: clk_disable: sclk_uart2
swapper/0-1 [002] d..1 0.925295: clk_enable: sclk_uart2
swapper/0-1 [003] d..1 1.914158: clk_disable: pclk_uart1
swapper/0-1 [003] d..1 2.208605: clk_disable: sclk_uart2
swapper/0-1 [003] d..1 2.208646: clk_enable: sclk_uart2
On 7/9/20 3:32 AM, elaine.zhang wrote:
> 在 2020/7/8 下午10:45, Johan Jonker 写道:
>> The rk3328 uart2 port is used as boot console and to debug.
>> During the boot pclk_uart2 is disabled by a clk_disable_unused
>> initcall. Fix the uart2 function by marking pclk_uart2
>> as critical on rk3328. Also add sclk_uart2 as that is needed
>> for the same DT node.
>>
>> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
>> ---
>> drivers/clk/rockchip/clk-rk3328.c | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/clk/rockchip/clk-rk3328.c
>> b/drivers/clk/rockchip/clk-rk3328.c
>> index c186a1985..cb7749cb7 100644
>> --- a/drivers/clk/rockchip/clk-rk3328.c
>> +++ b/drivers/clk/rockchip/clk-rk3328.c
>> @@ -875,6 +875,8 @@ static const char *const rk3328_critical_clocks[]
>> __initconst = {
>> "aclk_gmac_niu",
>> "pclk_gmac_niu",
>> "pclk_phy_niu",
>> + "pclk_uart2",
>> + "sclk_uart2",
>> };
>>
>
> Not need to mark the uart2 as critical clocks, the uart clk will enabled
> by uart driver probe(dw8250_probe()).
>
> For your question, Please check the uart2 dts node "status = okay".
>
> Or You can send me the complete log, I check the status of uart2.
>
>> static void __init rk3328_clk_init(struct device_node *np)
>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH] clk: rockchip: mark pclk_uart2 as critical on rk3328
2020-07-09 12:04 ` Johan Jonker
@ 2020-07-10 1:28 ` elaine.zhang
-1 siblings, 0 replies; 14+ messages in thread
From: elaine.zhang @ 2020-07-10 1:28 UTC (permalink / raw)
To: Johan Jonker, heiko
Cc: mturquette, sboyd, linux-clk, linux-arm-kernel, linux-rockchip,
linux-kernel, Robin Murphy
在 2020/7/9 下午8:04, Johan Jonker 写道:
> Hi Elaine, Robin,
>
> Thank you for your help!
> This patch can go in the garbage bin.
> It turns out that with SERIAL_8250 also SERIAL_8250_DW must be
> selected... ;)
>
> It's not in the Kconfig help description.
> Shouldn't that be automatically be included for Rockchip?
> Example:
>
> config SERIAL_8250
> tristate "8250/16550 and compatible serial support"
> depends on !S390
> select SERIAL_CORE
> select SERIAL_MCTRL_GPIO if GPIOLIB
> select SERIAL_8250_DW if ARCH_ROCKCHIP
Our Konfig:
config SERIAL_8250
tristate "8250/16550 and compatible serial support"
depends on !S390
select SERIAL_CORE
config SERIAL_8250_DW
tristate "Support for Synopsys DesignWare 8250 quirks"
depends on SERIAL_8250
So SERIAL_8250 and SERIAL_8250_DW must be selected.
If you use select SERIAL_8250_DW if ARCH_ROCKCHIP, check the CONIF_ARCH_ROCKCHIP=y.
In our rockchip_defconfig the CONIF_ARCH_ROCKCHIP=y by default.
> Thank Robin for the introduction to FTRACE!
>
> mount -t tracefs tracefs /sys/kernel/tracing
>
> cd /sys/kernel/tracing
>
> # Without SERIAL_8250_DW
>
> /sys/kernel/tracing # cat trace | grep uart2
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_div
> swapper/0-1 [002] d..1 1.916746: clk_disable: pclk_uart2
>
>
> /sys/kernel/tracing # cat trace | grep uart
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart1_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart1_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart1_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart1_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart0_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart0_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart0_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart0_div
> swapper/0-1 [002] d..1 1.916746: clk_disable: pclk_uart2
> swapper/0-1 [002] d..1 1.923959: clk_disable: pclk_uart1
> swapper/0-1 [002] d..1 1.930741: clk_disable: pclk_uart0
>
> # With SERIAL_8250_DW
>
> /sys/kernel/tracing # cat trace | grep uart2
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_div
> swapper/0-1 [002] d..1 0.923180: clk_enable: sclk_uart2
> swapper/0-1 [002] d..1 0.923224: clk_enable: pclk_uart2
> swapper/0-1 [002] d..1 0.925259: clk_disable: sclk_uart2
> swapper/0-1 [002] d..1 0.925295: clk_enable: sclk_uart2
> swapper/0-1 [003] d..1 2.208605: clk_disable: sclk_uart2
> swapper/0-1 [003] d..1 2.208646: clk_enable: sclk_uart2
>
> /sys/kernel/tracing # cat trace | grep uart
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart1_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart1_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart1_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart1_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart0_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart0_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart0_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart0_div
> swapper/0-1 [002] d..1 0.920034: clk_enable: sclk_uart0
> swapper/0-1 [002] d..1 0.920085: clk_enable: pclk_uart0
> kworker/2:1-32 [002] d..1 0.922596: clk_disable: sclk_uart0
> kworker/2:1-32 [002] d..1 0.922613: clk_disable: pclk_uart0
> swapper/0-1 [002] d..1 0.923180: clk_enable: sclk_uart2
> swapper/0-1 [002] d..1 0.923224: clk_enable: pclk_uart2
> swapper/0-1 [002] d..1 0.925259: clk_disable: sclk_uart2
> swapper/0-1 [002] d..1 0.925295: clk_enable: sclk_uart2
> swapper/0-1 [003] d..1 1.914158: clk_disable: pclk_uart1
> swapper/0-1 [003] d..1 2.208605: clk_disable: sclk_uart2
> swapper/0-1 [003] d..1 2.208646: clk_enable: sclk_uart2
>
>
>
> On 7/9/20 3:32 AM, elaine.zhang wrote:
>> 在 2020/7/8 下午10:45, Johan Jonker 写道:
>>> The rk3328 uart2 port is used as boot console and to debug.
>>> During the boot pclk_uart2 is disabled by a clk_disable_unused
>>> initcall. Fix the uart2 function by marking pclk_uart2
>>> as critical on rk3328. Also add sclk_uart2 as that is needed
>>> for the same DT node.
>>>
>>> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
>>> ---
>>> drivers/clk/rockchip/clk-rk3328.c | 2 ++
>>> 1 file changed, 2 insertions(+)
>>>
>>> diff --git a/drivers/clk/rockchip/clk-rk3328.c
>>> b/drivers/clk/rockchip/clk-rk3328.c
>>> index c186a1985..cb7749cb7 100644
>>> --- a/drivers/clk/rockchip/clk-rk3328.c
>>> +++ b/drivers/clk/rockchip/clk-rk3328.c
>>> @@ -875,6 +875,8 @@ static const char *const rk3328_critical_clocks[]
>>> __initconst = {
>>> "aclk_gmac_niu",
>>> "pclk_gmac_niu",
>>> "pclk_phy_niu",
>>> + "pclk_uart2",
>>> + "sclk_uart2",
>>> };
>>>
>> Not need to mark the uart2 as critical clocks, the uart clk will enabled
>> by uart driver probe(dw8250_probe()).
>>
>> For your question, Please check the uart2 dts node "status = okay".
>>
>> Or You can send me the complete log, I check the status of uart2.
>>
>>> static void __init rk3328_clk_init(struct device_node *np)
>>
>
>
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH] clk: rockchip: mark pclk_uart2 as critical on rk3328
@ 2020-07-10 1:28 ` elaine.zhang
0 siblings, 0 replies; 14+ messages in thread
From: elaine.zhang @ 2020-07-10 1:28 UTC (permalink / raw)
To: Johan Jonker, heiko
Cc: sboyd, mturquette, linux-kernel, linux-rockchip, Robin Murphy,
linux-clk, linux-arm-kernel
在 2020/7/9 下午8:04, Johan Jonker 写道:
> Hi Elaine, Robin,
>
> Thank you for your help!
> This patch can go in the garbage bin.
> It turns out that with SERIAL_8250 also SERIAL_8250_DW must be
> selected... ;)
>
> It's not in the Kconfig help description.
> Shouldn't that be automatically be included for Rockchip?
> Example:
>
> config SERIAL_8250
> tristate "8250/16550 and compatible serial support"
> depends on !S390
> select SERIAL_CORE
> select SERIAL_MCTRL_GPIO if GPIOLIB
> select SERIAL_8250_DW if ARCH_ROCKCHIP
Our Konfig:
config SERIAL_8250
tristate "8250/16550 and compatible serial support"
depends on !S390
select SERIAL_CORE
config SERIAL_8250_DW
tristate "Support for Synopsys DesignWare 8250 quirks"
depends on SERIAL_8250
So SERIAL_8250 and SERIAL_8250_DW must be selected.
If you use select SERIAL_8250_DW if ARCH_ROCKCHIP, check the CONIF_ARCH_ROCKCHIP=y.
In our rockchip_defconfig the CONIF_ARCH_ROCKCHIP=y by default.
> Thank Robin for the introduction to FTRACE!
>
> mount -t tracefs tracefs /sys/kernel/tracing
>
> cd /sys/kernel/tracing
>
> # Without SERIAL_8250_DW
>
> /sys/kernel/tracing # cat trace | grep uart2
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_div
> swapper/0-1 [002] d..1 1.916746: clk_disable: pclk_uart2
>
>
> /sys/kernel/tracing # cat trace | grep uart
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart1_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart1_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart1_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart1_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart0_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart0_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart0_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart0_div
> swapper/0-1 [002] d..1 1.916746: clk_disable: pclk_uart2
> swapper/0-1 [002] d..1 1.923959: clk_disable: pclk_uart1
> swapper/0-1 [002] d..1 1.930741: clk_disable: pclk_uart0
>
> # With SERIAL_8250_DW
>
> /sys/kernel/tracing # cat trace | grep uart2
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_div
> swapper/0-1 [002] d..1 0.923180: clk_enable: sclk_uart2
> swapper/0-1 [002] d..1 0.923224: clk_enable: pclk_uart2
> swapper/0-1 [002] d..1 0.925259: clk_disable: sclk_uart2
> swapper/0-1 [002] d..1 0.925295: clk_enable: sclk_uart2
> swapper/0-1 [003] d..1 2.208605: clk_disable: sclk_uart2
> swapper/0-1 [003] d..1 2.208646: clk_enable: sclk_uart2
>
> /sys/kernel/tracing # cat trace | grep uart
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart2_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart2_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart1_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart1_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart1_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart1_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart0_div
> <idle>-0 [000] d..2 0.000000: clk_enable: clk_uart0_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart0_frac
> <idle>-0 [000] d..2 0.000000: clk_disable: clk_uart0_div
> swapper/0-1 [002] d..1 0.920034: clk_enable: sclk_uart0
> swapper/0-1 [002] d..1 0.920085: clk_enable: pclk_uart0
> kworker/2:1-32 [002] d..1 0.922596: clk_disable: sclk_uart0
> kworker/2:1-32 [002] d..1 0.922613: clk_disable: pclk_uart0
> swapper/0-1 [002] d..1 0.923180: clk_enable: sclk_uart2
> swapper/0-1 [002] d..1 0.923224: clk_enable: pclk_uart2
> swapper/0-1 [002] d..1 0.925259: clk_disable: sclk_uart2
> swapper/0-1 [002] d..1 0.925295: clk_enable: sclk_uart2
> swapper/0-1 [003] d..1 1.914158: clk_disable: pclk_uart1
> swapper/0-1 [003] d..1 2.208605: clk_disable: sclk_uart2
> swapper/0-1 [003] d..1 2.208646: clk_enable: sclk_uart2
>
>
>
> On 7/9/20 3:32 AM, elaine.zhang wrote:
>> 在 2020/7/8 下午10:45, Johan Jonker 写道:
>>> The rk3328 uart2 port is used as boot console and to debug.
>>> During the boot pclk_uart2 is disabled by a clk_disable_unused
>>> initcall. Fix the uart2 function by marking pclk_uart2
>>> as critical on rk3328. Also add sclk_uart2 as that is needed
>>> for the same DT node.
>>>
>>> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
>>> ---
>>> drivers/clk/rockchip/clk-rk3328.c | 2 ++
>>> 1 file changed, 2 insertions(+)
>>>
>>> diff --git a/drivers/clk/rockchip/clk-rk3328.c
>>> b/drivers/clk/rockchip/clk-rk3328.c
>>> index c186a1985..cb7749cb7 100644
>>> --- a/drivers/clk/rockchip/clk-rk3328.c
>>> +++ b/drivers/clk/rockchip/clk-rk3328.c
>>> @@ -875,6 +875,8 @@ static const char *const rk3328_critical_clocks[]
>>> __initconst = {
>>> "aclk_gmac_niu",
>>> "pclk_gmac_niu",
>>> "pclk_phy_niu",
>>> + "pclk_uart2",
>>> + "sclk_uart2",
>>> };
>>>
>> Not need to mark the uart2 as critical clocks, the uart clk will enabled
>> by uart driver probe(dw8250_probe()).
>>
>> For your question, Please check the uart2 dts node "status = okay".
>>
>> Or You can send me the complete log, I check the status of uart2.
>>
>>> static void __init rk3328_clk_init(struct device_node *np)
>>
>
>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2020-07-10 1:30 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-08 14:45 [PATCH] clk: rockchip: mark pclk_uart2 as critical on rk3328 Johan Jonker
2020-07-08 14:45 ` Johan Jonker
2020-07-08 15:34 ` Robin Murphy
2020-07-08 15:34 ` Robin Murphy
2020-07-08 16:28 ` Johan Jonker
2020-07-08 16:28 ` Johan Jonker
2020-07-08 18:44 ` Robin Murphy
2020-07-08 18:44 ` Robin Murphy
2020-07-09 1:32 ` elaine.zhang
2020-07-09 1:32 ` elaine.zhang
2020-07-09 12:04 ` Johan Jonker
2020-07-09 12:04 ` Johan Jonker
2020-07-10 1:28 ` elaine.zhang
2020-07-10 1:28 ` elaine.zhang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.