* why would i *not* be able to update a register in ac97#0-0+regs when it's read write? @ 2007-02-17 1:08 John Utz 2007-02-17 1:24 ` Lee Revell 0 siblings, 1 reply; 9+ messages in thread From: John Utz @ 2007-02-17 1:08 UTC (permalink / raw) To: alsa-devel [-- Attachment #1.1: Type: text/plain, Size: 1754 bytes --] Hello; I have debugging turned on (--with-debug=detect) and the file is listed as writable: ls -l /proc/asound/card0/codec97#0/ac97#0-0+regs -rw-r--r-- 1 root root 0 Feb 16 08:47 /proc/asound/card0/codec97#0/ac97#0-0+regs but i get no joy in the file: cat /proc/asound/card0/codec97#0/ac97#0-0+regs | grep 0:60 0:60 = 0000 echo 60 1 > /proc/asound/card0/codec97#0/ac97#0-0+regs cat /proc/asound/card0/codec97#0/ac97#0-0+regs | grep 0:60 0:60 = 0000 the doc asserts that the register is rw: Note that this is from the docs for the via vt1618 Vendor Defined Register (Page ID = 00h) UAJ Control Index: 60h Default Value: 0038h Bit Attr. Description 15:6 RO Reserved 5:4 RW UAJ_2 (pin 21/22) Control 00: Reserved 01: Output from DAC_2 without analog mixing 10: Input as Line-In signal 11: Input as MIC1 & MIC2 signals (default) 3:2 RW UAJ_1 (pin 23/24) Control 00: Reserved 01: Output from DAC_1 without analog mixing 10: Input as Line-In signal (default) 11: Input as MIC1 & MIC2 signals 1:0 RW UAJ_0 (pin 35/36) Control 00: Output from DAC_0 with analog mixing (default) 01: Output from DAC_0 without analog mixing 10: Input as Line-In signal 11: Input as MIC1 & MIC2 signals i believe that i want to set these to the 01 setting so that i can get surround out from Universal Audio Jacks on our MSI motherboard samples am i barking up the wrong tree here? tnx! johnu [-- Attachment #1.2: Type: text/html, Size: 3930 bytes --] [-- Attachment #2: Type: text/plain, Size: 345 bytes --] ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV [-- Attachment #3: Type: text/plain, Size: 161 bytes --] _______________________________________________ Alsa-devel mailing list Alsa-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-devel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: why would i *not* be able to update a register in ac97#0-0+regs when it's read write? 2007-02-17 1:08 why would i *not* be able to update a register in ac97#0-0+regs when it's read write? John Utz @ 2007-02-17 1:24 ` Lee Revell 2007-02-17 1:52 ` John Utz 2007-02-17 11:40 ` Takashi Iwai 0 siblings, 2 replies; 9+ messages in thread From: Lee Revell @ 2007-02-17 1:24 UTC (permalink / raw) To: John Utz; +Cc: alsa-devel On 2/16/07, John Utz <John.Utz@dmxmusic.com> wrote: > > > > > Hello; > > I have debugging turned on (--with-debug=detect) and the file is listed as > writable: You want to use --with-debug=full. detect only enables debug code in ALSA's card detection. > i believe that i want to set these to the 01 setting so that i can get > surround out from Universal Audio Jacks on our MSI motherboard samples > > am i barking up the wrong tree here? Not sure - can you state the exact problem you are trying to solve? Lee ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: why would i *not* be able to update a register in ac97#0-0+regs when it's read write? 2007-02-17 1:24 ` Lee Revell @ 2007-02-17 1:52 ` John Utz 2007-02-17 2:01 ` Lee Revell 2007-02-17 11:40 ` Takashi Iwai 1 sibling, 1 reply; 9+ messages in thread From: John Utz @ 2007-02-17 1:52 UTC (permalink / raw) To: Lee Revell; +Cc: alsa-devel [-- Attachment #1.1: Type: text/plain, Size: 1691 bytes --] please forgive the lack of proper citing, i am stuck using outlook web access -----Original Message----- From: rlrevell@gmail.com on behalf of Lee Revell Sent: Fri 2/16/2007 5:24 PM To: John Utz Cc: alsa-devel@lists.sourceforge.net Subject: Re: [Alsa-devel] why would i *not* be able to update a register in ac97#0-0+regs when it's read write? On 2/16/07, John Utz <John.Utz@dmxmusic.com> wrote: > > > > > Hello; > > I have debugging turned on (--with-debug=detect) and the file is listed as > writable: You want to use --with-debug=full. detect only enables debug code in ALSA's card detection. i think the configure help should be changed; what would you conclude from this list: --with-debug=level give the debug level (none,basic,full,detect) to me, this certainly implies detect>full>basic>none > i believe that i want to set these to the 01 setting so that i can get > surround out from Universal Audio Jacks on our MSI motherboard samples > > am i barking up the wrong tree here? Not sure - can you state the exact problem you are trying to solve? there are two issues: 1. attempting to write to registers that are documented to be read-write doesnt result in a change of value; how do i debug this? 2. i have an msi motherboard with a via8237Rplus and a vt1618 8ch codec. it has only three plugs on the back that default to a stereo out, line in and mic in. they are supposed to be 'Universal Audio Jacks' and thus reconfigurable in the manner mentioned in the documentation that i listed previously - i wont really know if i have this write until i get the write to work Lee [-- Attachment #1.2: Type: text/html, Size: 2517 bytes --] [-- Attachment #2: Type: text/plain, Size: 345 bytes --] ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV [-- Attachment #3: Type: text/plain, Size: 161 bytes --] _______________________________________________ Alsa-devel mailing list Alsa-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-devel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: why would i *not* be able to update a register in ac97#0-0+regs when it's read write? 2007-02-17 1:52 ` John Utz @ 2007-02-17 2:01 ` Lee Revell 2007-02-20 17:46 ` John Utz [not found] ` <F8FB97052F1BEF409F7842E960E49B5AAAF899@sea-exch-01.na.corp.dmxmusic. com> 0 siblings, 2 replies; 9+ messages in thread From: Lee Revell @ 2007-02-17 2:01 UTC (permalink / raw) To: John Utz; +Cc: alsa-devel On 2/16/07, John Utz <John.Utz@dmxmusic.com> wrote: > i think the configure help should be changed; what would you conclude from > this list: > > --with-debug=level give the debug level (none,basic,full,detect) > > to me, this certainly implies detect>full>basic>none > Agreed. > > > i believe that i want to set these to the 01 setting so that i can get > > surround out from Universal Audio Jacks on our MSI motherboard samples > > > > am i barking up the wrong tree here? > > Not sure - can you state the exact problem you are trying to solve? > > > there are two issues: > > 1. attempting to write to registers that are documented to be read-write > doesnt > result in a change of value; how do i debug this? > The mode in /proc is misleading but the documentation in Documentation/ALSA-Configuration.txt is correct. > 2. i have an msi motherboard with a via8237Rplus and a vt1618 8ch codec. it > has only > three plugs on the back that default to a stereo out, line in and mic > in. > > they are supposed to be 'Universal Audio Jacks' and thus reconfigurable > in the manner > mentioned in the documentation that i listed previously - i wont really > know if i have this > write until i get the write to work > How do you know that surround out from this device isn't already supported? Does: speaker-test -c 6 -Dsurround51 produce output on all speakers? What is the output of "amixer"? Lee ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: why would i *not* be able to update a register in ac97#0-0+regs when it's read write? 2007-02-17 2:01 ` Lee Revell @ 2007-02-20 17:46 ` John Utz [not found] ` <F8FB97052F1BEF409F7842E960E49B5AAAF899@sea-exch-01.na.corp.dmxmusic. com> 1 sibling, 0 replies; 9+ messages in thread From: John Utz @ 2007-02-20 17:46 UTC (permalink / raw) To: Lee Revell; +Cc: alsa-devel [-- Attachment #1.1: Type: text/plain, Size: 8884 bytes --] once again, plz forgive the lack of proper citing. my delayed response is due to the fact that the previously 3 days was a holiday weekend. -----Original Message----- From: rlrevell@gmail.com on behalf of Lee Revell Sent: Fri 2/16/2007 6:01 PM To: John Utz Cc: alsa-devel@lists.sourceforge.net Subject: Re: [Alsa-devel] why would i *not* be able to update a register in ac97#0-0+regs when it's read write? On 2/16/07, John Utz <John.Utz@dmxmusic.com> wrote: > i think the configure help should be changed; what would you conclude from > this list: > > --with-debug=level give the debug level (none,basic,full,detect) > > to me, this certainly implies detect>full>basic>none > Agreed. Good, i am not crazy :-) Anyway, i went back and reconfigured/recompiled/reinstalled/remodprobed as --with-debug=full Nothing changed, i can still write to many registers but not the 1 that i am attempting to change: 60h UAJ Control; Does the '(Page ID = 00h)' alter how i need to access the register?: Vendor Defined Register (Page ID = 00h) UAJ Control Index: 60h Default Value: 0038h Bit Attr. Description 15:6 RO Reserved 5:4 RW UAJ_2 (pin 21/22) Control 00: Reserved 01: Output from DAC_2 without analog mixing 10: Input as Line-In signal 11: Input as MIC1 & MIC2 signals (default) 3:2 RW UAJ_1 (pin 23/24) Control 00: Reserved 01: Output from DAC_1 without analog mixing 10: Input as Line-In signal (default) 11: Input as MIC1 & MIC2 signals 1:0 RW UAJ_0 (pin 35/36) Control 00: Output from DAC_0 with analog mixing (default) 01: Output from DAC_0 without analog mixing 10: Input as Line-In signal 11: Input as MIC1 & MIC2 signals > there are two issues: > > 1. attempting to write to registers that are documented to be read-write > doesnt > result in a change of value; how do i debug this? > The mode in /proc is misleading but the documentation in Documentation/ALSA-Configuration.txt is correct. What portion of that documentation are you refering to? Note that I can change lots of other registers to my heart's content. > 2. i have an msi motherboard with a via8237Rplus and a vt1618 8ch codec. it > has only > three plugs on the back that default to a stereo out, line in and mic > in. > > they are supposed to be 'Universal Audio Jacks' and thus reconfigurable > in the manner > mentioned in the documentation that i listed previously - i wont really > know if i have this > write until i get the write to work > How do you know that surround out from this device isn't already supported? Does: speaker-test -c 6 -Dsurround51 produce output on all speakers? That's a very reasonable question to ask; No, it does not, otherwise i wouldnt be attempting to manipulate registers involved with causing the mic and line input plugs to be repurposed as center/lfe and surround outputs. What is the output of "amixer"? Simple mixer control 'Master',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 25 [81%] [-9.00dB] [on] Front Right: Playback 25 [81%] [-9.00dB] [on] Simple mixer control 'PCM',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 25 [81%] [3.00dB] [on] Front Right: Playback 25 [81%] [3.00dB] [on] Simple mixer control 'Surround',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 25 [81%] [-9.00dB] [on] Front Right: Playback 25 [81%] [-9.00dB] [on] Simple mixer control 'Center',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 25 [81%] [-9.00dB] [off] Simple mixer control 'LFE',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 25 [81%] [-9.00dB] [on] Simple mixer control 'Line',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off] Simple mixer control 'CD',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off] Simple mixer control 'Mic',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Mono Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Playback 0 [0%] [-34.50dB] [off] Front Left: Capture [on] Front Right: Capture [on] Simple mixer control 'Mic Boost (+20dB)',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Mic Select',0 Capabilities: enum Items: 'Mic1' 'Mic2' Item0: 'Mic1' Simple mixer control 'Video',0 Capabilities: cswitch cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'Phone',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Mono Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Playback 0 [0%] [-34.50dB] [off] Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'PC Speaker',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 15 Mono: Playback 0 [0%] [-45.00dB] [off] Simple mixer control 'Aux',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch cswitch-joined Capture channels: Front Left - Front Right Limits: Capture 0 - 15 Front Left: Capture 0 [0%] [0.00dB] [on] Front Right: Capture 0 [0%] [0.00dB] [on] Simple mixer control 'Mix',0 Capabilities: cswitch cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'Mix Mono',0 Capabilities: cswitch cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'External Amplifier',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'Input Source Select',0 Capabilities: enum Items: 'Input1' 'Input2' Item0: 'Input1' Simple mixer control 'Input Source Select',1 Capabilities: enum Items: 'Input1' 'Input2' Item0: 'Input1' Simple mixer control 'VIA DXS',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [-48.00dB] Front Right: Playback 31 [100%] [-48.00dB] Simple mixer control 'VIA DXS',1 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [-48.00dB] Front Right: Playback 31 [100%] [-48.00dB] Simple mixer control 'VIA DXS',2 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [-48.00dB] Front Right: Playback 31 [100%] [-48.00dB] Simple mixer control 'VIA DXS',3 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [-48.00dB] Front Right: Playback 31 [100%] [-48.00dB] Lee [-- Attachment #1.2: Type: text/html, Size: 12753 bytes --] [-- Attachment #2: Type: text/plain, Size: 345 bytes --] ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV [-- Attachment #3: Type: text/plain, Size: 161 bytes --] _______________________________________________ Alsa-devel mailing list Alsa-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-devel ^ permalink raw reply [flat|nested] 9+ messages in thread
[parent not found: <F8FB97052F1BEF409F7842E960E49B5AAAF899@sea-exch-01.na.corp.dmxmusic. com>]
[parent not found: <F8FB97052F1BEF409F7842E960E49B5AAAF899@sea-exch-01.na.corp.dmxmusic.co m>]
* Re: why would i *not* be able to update a register in ac97#0-0+regs when it's read write? [not found] ` <F8FB97052F1BEF409F7842E960E49B5AAAF899@sea-exch-01.na.corp.dmxmusic.co m> @ 2007-02-21 7:29 ` Clemens Ladisch 2007-02-21 17:44 ` John Utz 0 siblings, 1 reply; 9+ messages in thread From: Clemens Ladisch @ 2007-02-21 7:29 UTC (permalink / raw) To: John Utz, Lee Revell; +Cc: alsa-devel > Nothing changed, i can still write to many registers but not the 1 that i > am attempting to change: 60h UAJ Control; Does the '(Page ID = 00h)' > alter how i need to access the register? Yes, you have to set the correct page in the Audio Interrupt and Paging register (24h); see the AC97_PAGE_* defines in ac97_codec.h. HTH Clemens ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: why would i *not* be able to update a register in ac97#0-0+regs when it's read write? 2007-02-21 7:29 ` Clemens Ladisch @ 2007-02-21 17:44 ` John Utz 2007-02-21 19:11 ` SUCCESS!!! " John Utz 0 siblings, 1 reply; 9+ messages in thread From: John Utz @ 2007-02-21 17:44 UTC (permalink / raw) To: Clemens Ladisch, Lee Revell; +Cc: alsa-devel [-- Attachment #1.1: Type: text/plain, Size: 765 bytes --] -----Original Message----- From: Clemens Ladisch [mailto:cladisch@fastmail.net] Sent: Tue 2/20/2007 11:29 PM To: John Utz; Lee Revell Cc: alsa-devel@lists.sourceforge.net Subject: Re: [Alsa-devel] why would i *not* be able to update a register in ac97#0-0+regs when it's read write? > Nothing changed, i can still write to many registers but not the 1 that i > am attempting to change: 60h UAJ Control; Does the '(Page ID = 00h)' > alter how i need to access the register? Yes, you have to set the correct page in the Audio Interrupt and Paging register (24h); see the AC97_PAGE_* defines in ac97_codec.h. Thankyou Clemens, i thought there might be something to it, but i wasnt sure what. This should be a big help HTH Clemens [-- Attachment #1.2: Type: text/html, Size: 1364 bytes --] [-- Attachment #2: Type: text/plain, Size: 345 bytes --] ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV [-- Attachment #3: Type: text/plain, Size: 161 bytes --] _______________________________________________ Alsa-devel mailing list Alsa-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-devel ^ permalink raw reply [flat|nested] 9+ messages in thread
* SUCCESS!!! RE: why would i *not* be able to update a register in ac97#0-0+regs when it's read write? 2007-02-21 17:44 ` John Utz @ 2007-02-21 19:11 ` John Utz 0 siblings, 0 replies; 9+ messages in thread From: John Utz @ 2007-02-21 19:11 UTC (permalink / raw) To: John Utz, Clemens Ladisch, Lee Revell; +Cc: alsa-devel [-- Attachment #1.1: Type: text/plain, Size: 1389 bytes --] -----Original Message----- From: alsa-devel-bounces@lists.sourceforge.net on behalf of John Utz Sent: Wed 2/21/2007 9:44 AM To: Clemens Ladisch; Lee Revell Cc: alsa-devel@lists.sourceforge.net Subject: Re: [Alsa-devel] why would i *not* be able to update a register in ac97#0-0+regs when it's read write? -----Original Message----- From: Clemens Ladisch [mailto:cladisch@fastmail.net] Sent: Tue 2/20/2007 11:29 PM To: John Utz; Lee Revell Cc: alsa-devel@lists.sourceforge.net Yup, that did it! chan-id.wav now calls out on the surround and center/lfe outputs with the vt1618 so we now actually have a reasonable hope of shipping our product. Thankyou very much for your assistance, patch to follow in the next few days assuming that i receive no managerial grief. Subject: Re: [Alsa-devel] why would i *not* be able to update a register in ac97#0-0+regs when it's read write? > Nothing changed, i can still write to many registers but not the 1 that i > am attempting to change: 60h UAJ Control; Does the '(Page ID = 00h)' > alter how i need to access the register? Yes, you have to set the correct page in the Audio Interrupt and Paging register (24h); see the AC97_PAGE_* defines in ac97_codec.h. Thankyou Clemens, i thought there might be something to it, but i wasnt sure what. This should be a big help HTH Clemens [-- Attachment #1.2: Type: text/html, Size: 2079 bytes --] [-- Attachment #2: Type: text/plain, Size: 345 bytes --] ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV [-- Attachment #3: Type: text/plain, Size: 161 bytes --] _______________________________________________ Alsa-devel mailing list Alsa-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-devel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: why would i *not* be able to update a register in ac97#0-0+regs when it's read write? 2007-02-17 1:24 ` Lee Revell 2007-02-17 1:52 ` John Utz @ 2007-02-17 11:40 ` Takashi Iwai 1 sibling, 0 replies; 9+ messages in thread From: Takashi Iwai @ 2007-02-17 11:40 UTC (permalink / raw) To: Lee Revell; +Cc: alsa-devel, John Utz At Fri, 16 Feb 2007 20:24:13 -0500, Lee Revell wrote: > > On 2/16/07, John Utz <John.Utz@dmxmusic.com> wrote: > > > > > > > > > > Hello; > > > > I have debugging turned on (--with-debug=detect) and the file is listed as > > writable: > > You want to use --with-debug=full. detect only enables debug code in > ALSA's card detection. Actually, no, --with-debug=detect enables all debug features. It's confusing (why full is not full), but it's life :) We should improve this description in INTALL file. Takashi ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2007-02-21 19:11 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2007-02-17 1:08 why would i *not* be able to update a register in ac97#0-0+regs when it's read write? John Utz 2007-02-17 1:24 ` Lee Revell 2007-02-17 1:52 ` John Utz 2007-02-17 2:01 ` Lee Revell 2007-02-20 17:46 ` John Utz [not found] ` <F8FB97052F1BEF409F7842E960E49B5AAAF899@sea-exch-01.na.corp.dmxmusic. com> [not found] ` <F8FB97052F1BEF409F7842E960E49B5AAAF899@sea-exch-01.na.corp.dmxmusic.co m> 2007-02-21 7:29 ` Clemens Ladisch 2007-02-21 17:44 ` John Utz 2007-02-21 19:11 ` SUCCESS!!! " John Utz 2007-02-17 11:40 ` Takashi Iwai
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.