From: Martin Kepplinger <martin.kepplinger@ginzinger.com> To: Martin Kepplinger <martink@posteo.de>, <devicetree@vger.kernel.org>, <linux-input@vger.kernel.org> Cc: <dmitry.torokhov@gmail.com>, <robh+dt@kernel.org>, <mark.rutland@arm.com>, <linux-kernel@vger.kernel.org> Subject: Re: [PATCH 2/2] Input: st1232 - switch to gpiod API Date: Tue, 5 Feb 2019 11:20:16 +0100 [thread overview] Message-ID: <83a86244-f40b-44b1-d7be-1fcbeb4c359e@ginzinger.com> (raw) In-Reply-To: <20190129102347.27754-2-martink@posteo.de> [-- Attachment #1: Type: text/plain, Size: 3231 bytes --] Martin Kepplinger | Entwicklung Software GINZINGER ELECTRONIC SYSTEMS GMBH Tel.: +43 7723 5422 157 Mail: martin.kepplinger@ginzinger.com Web: www.ginzinger.com On 29.01.19 11:23, Martin Kepplinger wrote: > From: Martin Kepplinger <martin.kepplinger@ginzinger.com> > > Use devm_gpiod_get_optional() and gpiod_set_value_cansleep() instead > of the old API. The st1232_ts_power() now passes on the inverted "poweron" > value to reflect the correct logical value. > > Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> > --- > > Tested and works. thanks for your help Dmitry, > is this what you had in mind? any problems or questions? thanks martin > > > > drivers/input/touchscreen/st1232.c | 22 ++++++++++------------ > 1 file changed, 10 insertions(+), 12 deletions(-) > > diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c > index 777df903605d..04d75b08be44 100644 > --- a/drivers/input/touchscreen/st1232.c > +++ b/drivers/input/touchscreen/st1232.c > @@ -45,7 +45,7 @@ struct st1232_ts_data { > struct i2c_client *client; > struct input_dev *input_dev; > struct dev_pm_qos_request low_latency_req; > - int reset_gpio; > + struct gpio_desc *reset_gpio; > const struct st_chip_info *chip_info; > int read_buf_len; > u8 *read_buf; > @@ -142,8 +142,8 @@ static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id) > > static void st1232_ts_power(struct st1232_ts_data *ts, bool poweron) > { > - if (gpio_is_valid(ts->reset_gpio)) > - gpio_direction_output(ts->reset_gpio, poweron); > + if (ts->reset_gpio) > + gpiod_set_value_cansleep(ts->reset_gpio, !poweron); > } > > static const struct st_chip_info st1232_chip_info = { > @@ -215,15 +215,13 @@ static int st1232_ts_probe(struct i2c_client *client, > ts->client = client; > ts->input_dev = input_dev; > > - ts->reset_gpio = of_get_gpio(client->dev.of_node, 0); > - if (gpio_is_valid(ts->reset_gpio)) { > - error = devm_gpio_request(&client->dev, ts->reset_gpio, NULL); > - if (error) { > - dev_err(&client->dev, > - "Unable to request GPIO pin %d.\n", > - ts->reset_gpio); > - return error; > - } > + ts->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset", > + GPIOD_OUT_HIGH); > + if (IS_ERR(ts->reset_gpio)) { > + error = PTR_ERR(ts->reset_gpio); > + dev_err(&client->dev, "Unable to request GPIO pin: %d.\n", > + error); > + return error; > } > > st1232_ts_power(ts, true); > ________________________________________ Ginzinger electronic systems GmbH Gewerbegebiet Pirath 16 4952 Weng im Innkreis www.ginzinger.com Firmenbuchnummer: FN 364958d Firmenbuchgericht: Ried im Innkreis UID-Nr.: ATU66521089 Diese Nachricht ist vertraulich und darf nicht an andere Personen weitergegeben oder von diesen verwendet werden. Verständigen Sie uns, wenn Sie irrtümlich eine Mitteilung empfangen haben. This message is confidential. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message by mistake, please advise the sender. [-- Attachment #2: smime.p7s --] [-- Type: application/x-pkcs7-signature, Size: 3616 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Martin Kepplinger <martin.kepplinger@ginzinger.com> To: Martin Kepplinger <martink@posteo.de>, devicetree@vger.kernel.org, linux-input@vger.kernel.org Cc: dmitry.torokhov@gmail.com, robh+dt@kernel.org, mark.rutland@arm.com, linux-kernel@vger.kernel.org Subject: Re: [PATCH 2/2] Input: st1232 - switch to gpiod API Date: Tue, 5 Feb 2019 11:20:16 +0100 [thread overview] Message-ID: <83a86244-f40b-44b1-d7be-1fcbeb4c359e@ginzinger.com> (raw) In-Reply-To: <20190129102347.27754-2-martink@posteo.de> [-- Attachment #1: Type: text/plain, Size: 3231 bytes --] Martin Kepplinger | Entwicklung Software GINZINGER ELECTRONIC SYSTEMS GMBH Tel.: +43 7723 5422 157 Mail: martin.kepplinger@ginzinger.com Web: www.ginzinger.com On 29.01.19 11:23, Martin Kepplinger wrote: > From: Martin Kepplinger <martin.kepplinger@ginzinger.com> > > Use devm_gpiod_get_optional() and gpiod_set_value_cansleep() instead > of the old API. The st1232_ts_power() now passes on the inverted "poweron" > value to reflect the correct logical value. > > Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> > --- > > Tested and works. thanks for your help Dmitry, > is this what you had in mind? any problems or questions? thanks martin > > > > drivers/input/touchscreen/st1232.c | 22 ++++++++++------------ > 1 file changed, 10 insertions(+), 12 deletions(-) > > diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c > index 777df903605d..04d75b08be44 100644 > --- a/drivers/input/touchscreen/st1232.c > +++ b/drivers/input/touchscreen/st1232.c > @@ -45,7 +45,7 @@ struct st1232_ts_data { > struct i2c_client *client; > struct input_dev *input_dev; > struct dev_pm_qos_request low_latency_req; > - int reset_gpio; > + struct gpio_desc *reset_gpio; > const struct st_chip_info *chip_info; > int read_buf_len; > u8 *read_buf; > @@ -142,8 +142,8 @@ static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id) > > static void st1232_ts_power(struct st1232_ts_data *ts, bool poweron) > { > - if (gpio_is_valid(ts->reset_gpio)) > - gpio_direction_output(ts->reset_gpio, poweron); > + if (ts->reset_gpio) > + gpiod_set_value_cansleep(ts->reset_gpio, !poweron); > } > > static const struct st_chip_info st1232_chip_info = { > @@ -215,15 +215,13 @@ static int st1232_ts_probe(struct i2c_client *client, > ts->client = client; > ts->input_dev = input_dev; > > - ts->reset_gpio = of_get_gpio(client->dev.of_node, 0); > - if (gpio_is_valid(ts->reset_gpio)) { > - error = devm_gpio_request(&client->dev, ts->reset_gpio, NULL); > - if (error) { > - dev_err(&client->dev, > - "Unable to request GPIO pin %d.\n", > - ts->reset_gpio); > - return error; > - } > + ts->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset", > + GPIOD_OUT_HIGH); > + if (IS_ERR(ts->reset_gpio)) { > + error = PTR_ERR(ts->reset_gpio); > + dev_err(&client->dev, "Unable to request GPIO pin: %d.\n", > + error); > + return error; > } > > st1232_ts_power(ts, true); > ________________________________________ Ginzinger electronic systems GmbH Gewerbegebiet Pirath 16 4952 Weng im Innkreis www.ginzinger.com Firmenbuchnummer: FN 364958d Firmenbuchgericht: Ried im Innkreis UID-Nr.: ATU66521089 Diese Nachricht ist vertraulich und darf nicht an andere Personen weitergegeben oder von diesen verwendet werden. Verständigen Sie uns, wenn Sie irrtümlich eine Mitteilung empfangen haben. This message is confidential. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message by mistake, please advise the sender. [-- Attachment #2: smime.p7s --] [-- Type: application/x-pkcs7-signature, Size: 3616 bytes --]
next prev parent reply other threads:[~2019-02-05 10:20 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-01-29 10:23 [PATCH 1/2] dt-bindings: input: sitronix-st1232: document optional reset-gpios property Martin Kepplinger 2019-01-29 10:23 ` [PATCH 2/2] Input: st1232 - switch to gpiod API Martin Kepplinger 2019-02-05 10:20 ` Martin Kepplinger [this message] 2019-02-05 10:20 ` Martin Kepplinger 2019-02-08 8:05 ` Dmitry Torokhov 2019-02-25 14:43 ` [PATCH 1/2] dt-bindings: input: sitronix-st1232: document optional reset-gpios property Rob Herring 2019-02-26 6:18 ` Martin Kepplinger 2019-02-26 6:18 ` Martin Kepplinger
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=83a86244-f40b-44b1-d7be-1fcbeb4c359e@ginzinger.com \ --to=martin.kepplinger@ginzinger.com \ --cc=devicetree@vger.kernel.org \ --cc=dmitry.torokhov@gmail.com \ --cc=linux-input@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=martink@posteo.de \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.