* [PULL 00/29] target-arm queue
@ 2023-05-18 12:50 Peter Maydell
2023-05-18 12:50 ` [PULL 01/29] sbsa-ref: switch default cpu core to Neoverse-N1 Peter Maydell
` (29 more replies)
0 siblings, 30 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:50 UTC (permalink / raw)
To: qemu-devel
Hi; this mostly contains the first slice of A64 decodetree
patches, plus some other minor pieces. It also has the
enablement of MTE for KVM guests.
thanks
-- PMM
The following changes since commit d27e7c359330ba7020bdbed7ed2316cb4cf6ffc1:
qapi/parser: Drop two bad type hints for now (2023-05-17 10:18:33 -0700)
are available in the Git repository at:
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230518
for you to fetch changes up to 91608e2a44f36e79cb83f863b8a7bb57d2c98061:
docs: Convert u2f.txt to rST (2023-05-18 11:40:32 +0100)
----------------------------------------------------------------
target-arm queue:
* Fix vd == vm overlap in sve_ldff1_z
* Add support for MTE with KVM guests
* Add RAZ/WI handling for DBGDTR[TX|RX]
* Start of conversion of A64 decoder to decodetree
* Saturate L2CTLR_EL1 core count field rather than overflowing
* vexpress: Avoid trivial memory leak of 'flashalias'
* sbsa-ref: switch default cpu core to Neoverse-N1
* sbsa-ref: use Bochs graphics card instead of VGA
* MAINTAINERS: Add Marcin Juszkiewicz to sbsa-ref reviewer list
* docs: Convert u2f.txt to rST
----------------------------------------------------------------
Alex Bennée (1):
target/arm: add RAZ/WI handling for DBGDTR[TX|RX]
Cornelia Huck (1):
arm/kvm: add support for MTE
Marcin Juszkiewicz (3):
sbsa-ref: switch default cpu core to Neoverse-N1
Maintainers: add myself as reviewer for sbsa-ref
sbsa-ref: use Bochs graphics card instead of VGA
Peter Maydell (14):
target/arm: Create decodetree skeleton for A64
target/arm: Pull calls to disas_sve() and disas_sme() out of legacy decoder
target/arm: Convert Extract instructions to decodetree
target/arm: Convert unconditional branch immediate to decodetree
target/arm: Convert CBZ, CBNZ to decodetree
target/arm: Convert TBZ, TBNZ to decodetree
target/arm: Convert conditional branch insns to decodetree
target/arm: Convert BR, BLR, RET to decodetree
target/arm: Convert BRA[AB]Z, BLR[AB]Z, RETA[AB] to decodetree
target/arm: Convert BRAA, BRAB, BLRAA, BLRAB to decodetree
target/arm: Convert ERET, ERETAA, ERETAB to decodetree
target/arm: Saturate L2CTLR_EL1 core count field rather than overflowing
hw/arm/vexpress: Avoid trivial memory leak of 'flashalias'
docs: Convert u2f.txt to rST
Richard Henderson (10):
target/arm: Fix vd == vm overlap in sve_ldff1_z
target/arm: Split out disas_a64_legacy
target/arm: Convert PC-rel addressing to decodetree
target/arm: Split gen_add_CC and gen_sub_CC
target/arm: Convert Add/subtract (immediate) to decodetree
target/arm: Convert Add/subtract (immediate with tags) to decodetree
target/arm: Replace bitmask64 with MAKE_64BIT_MASK
target/arm: Convert Logical (immediate) to decodetree
target/arm: Convert Move wide (immediate) to decodetree
target/arm: Convert Bitfield to decodetree
MAINTAINERS | 1 +
docs/system/device-emulation.rst | 1 +
docs/system/devices/usb-u2f.rst | 93 +++
docs/system/devices/usb.rst | 2 +-
docs/u2f.txt | 110 ----
target/arm/cpu.h | 4 +
target/arm/kvm_arm.h | 19 +
target/arm/tcg/translate.h | 5 +
target/arm/tcg/a64.decode | 152 +++++
hw/arm/sbsa-ref.c | 4 +-
hw/arm/vexpress.c | 40 +-
hw/arm/virt.c | 73 ++-
target/arm/cortex-regs.c | 11 +-
target/arm/cpu.c | 9 +-
target/arm/debug_helper.c | 11 +-
target/arm/kvm.c | 35 +
target/arm/kvm64.c | 5 +
target/arm/tcg/sve_helper.c | 6 +
target/arm/tcg/translate-a64.c | 1321 ++++++++++++++++----------------------
target/arm/tcg/meson.build | 1 +
20 files changed, 979 insertions(+), 924 deletions(-)
create mode 100644 docs/system/devices/usb-u2f.rst
delete mode 100644 docs/u2f.txt
create mode 100644 target/arm/tcg/a64.decode
^ permalink raw reply [flat|nested] 41+ messages in thread
* [PULL 01/29] sbsa-ref: switch default cpu core to Neoverse-N1
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
@ 2023-05-18 12:50 ` Peter Maydell
2023-05-18 12:50 ` [PULL 02/29] target/arm: Fix vd == vm overlap in sve_ldff1_z Peter Maydell
` (28 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:50 UTC (permalink / raw)
To: qemu-devel
From: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
The world outside moves to newer and newer cpu cores. Let move SBSA
Reference Platform to something newer as well.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20230506183417.1360427-1-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/arm/sbsa-ref.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c
index 0b93558dde1..a1562f944a6 100644
--- a/hw/arm/sbsa-ref.c
+++ b/hw/arm/sbsa-ref.c
@@ -852,7 +852,7 @@ static void sbsa_ref_class_init(ObjectClass *oc, void *data)
mc->init = sbsa_ref_init;
mc->desc = "QEMU 'SBSA Reference' ARM Virtual Machine";
- mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a57");
+ mc->default_cpu_type = ARM_CPU_TYPE_NAME("neoverse-n1");
mc->max_cpus = 512;
mc->pci_allow_0_address = true;
mc->minimum_page_bits = 12;
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 02/29] target/arm: Fix vd == vm overlap in sve_ldff1_z
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
2023-05-18 12:50 ` [PULL 01/29] sbsa-ref: switch default cpu core to Neoverse-N1 Peter Maydell
@ 2023-05-18 12:50 ` Peter Maydell
2023-05-18 12:50 ` [PULL 03/29] Maintainers: add myself as reviewer for sbsa-ref Peter Maydell
` (27 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:50 UTC (permalink / raw)
To: qemu-devel
From: Richard Henderson <richard.henderson@linaro.org>
If vd == vm, copy vm to scratch, so that we can pre-zero
the output and still access the gather indicies.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1612
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230504104232.1877774-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/tcg/sve_helper.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/target/arm/tcg/sve_helper.c b/target/arm/tcg/sve_helper.c
index ccf5e5beca2..0097522470e 100644
--- a/target/arm/tcg/sve_helper.c
+++ b/target/arm/tcg/sve_helper.c
@@ -6727,6 +6727,7 @@ void sve_ldff1_z(CPUARMState *env, void *vd, uint64_t *vg, void *vm,
intptr_t reg_off;
SVEHostPage info;
target_ulong addr, in_page;
+ ARMVectorReg scratch;
/* Skip to the first true predicate. */
reg_off = find_next_active(vg, 0, reg_max, esz);
@@ -6736,6 +6737,11 @@ void sve_ldff1_z(CPUARMState *env, void *vd, uint64_t *vg, void *vm,
return;
}
+ /* Protect against overlap between vd and vm. */
+ if (unlikely(vd == vm)) {
+ vm = memcpy(&scratch, vm, reg_max);
+ }
+
/*
* Probe the first element, allowing faults.
*/
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 03/29] Maintainers: add myself as reviewer for sbsa-ref
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
2023-05-18 12:50 ` [PULL 01/29] sbsa-ref: switch default cpu core to Neoverse-N1 Peter Maydell
2023-05-18 12:50 ` [PULL 02/29] target/arm: Fix vd == vm overlap in sve_ldff1_z Peter Maydell
@ 2023-05-18 12:50 ` Peter Maydell
2023-05-18 12:50 ` [PULL 04/29] arm/kvm: add support for MTE Peter Maydell
` (26 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:50 UTC (permalink / raw)
To: qemu-devel
From: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
At Linaro I work on sbsa-ref, know direction it goes.
May not get code details each time.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230515143753.365591-1-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
MAINTAINERS | 1 +
1 file changed, 1 insertion(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 50585117a0b..d0e604c725d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -940,6 +940,7 @@ SBSA-REF
M: Radoslaw Biernacki <rad@semihalf.com>
M: Peter Maydell <peter.maydell@linaro.org>
R: Leif Lindholm <quic_llindhol@quicinc.com>
+R: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
L: qemu-arm@nongnu.org
S: Maintained
F: hw/arm/sbsa-ref.c
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 04/29] arm/kvm: add support for MTE
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (2 preceding siblings ...)
2023-05-18 12:50 ` [PULL 03/29] Maintainers: add myself as reviewer for sbsa-ref Peter Maydell
@ 2023-05-18 12:50 ` Peter Maydell
2023-05-19 12:51 ` Alex Bennée
2023-05-18 12:50 ` [PULL 05/29] target/arm: add RAZ/WI handling for DBGDTR[TX|RX] Peter Maydell
` (25 subsequent siblings)
29 siblings, 1 reply; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:50 UTC (permalink / raw)
To: qemu-devel
From: Cornelia Huck <cohuck@redhat.com>
Extend the 'mte' property for the virt machine to cover KVM as
well. For KVM, we don't allocate tag memory, but instead enable the
capability.
If MTE has been enabled, we need to disable migration, as we do not
yet have a way to migrate the tags as well. Therefore, MTE will stay
off with KVM unless requested explicitly.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230428095533.21747-2-cohuck@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/cpu.h | 4 +++
target/arm/kvm_arm.h | 19 ++++++++++++
hw/arm/virt.c | 73 +++++++++++++++++++++++++-------------------
target/arm/cpu.c | 9 +++---
target/arm/kvm.c | 35 +++++++++++++++++++++
target/arm/kvm64.c | 5 +++
6 files changed, 109 insertions(+), 36 deletions(-)
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index d469a2637b3..c3463e39bcd 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -935,6 +935,9 @@ struct ArchCPU {
*/
uint32_t psci_conduit;
+ /* CPU has Memory Tag Extension */
+ bool has_mte;
+
/* For v8M, initial value of the Secure VTOR */
uint32_t init_svtor;
/* For v8M, initial value of the Non-secure VTOR */
@@ -1053,6 +1056,7 @@ struct ArchCPU {
bool prop_pauth;
bool prop_pauth_impdef;
bool prop_lpa2;
+ OnOffAuto prop_mte;
/* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */
uint32_t dcz_blocksize;
diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h
index 330fbe5c722..2083547bf60 100644
--- a/target/arm/kvm_arm.h
+++ b/target/arm/kvm_arm.h
@@ -313,6 +313,13 @@ bool kvm_arm_pmu_supported(void);
*/
bool kvm_arm_sve_supported(void);
+/**
+ * kvm_arm_mte_supported:
+ *
+ * Returns: true if KVM can enable MTE, and false otherwise.
+ */
+bool kvm_arm_mte_supported(void);
+
/**
* kvm_arm_get_max_vm_ipa_size:
* @ms: Machine state handle
@@ -377,6 +384,8 @@ void kvm_arm_pvtime_init(CPUState *cs, uint64_t ipa);
int kvm_arm_set_irq(int cpu, int irqtype, int irq, int level);
+void kvm_arm_enable_mte(Object *cpuobj, Error **errp);
+
#else
/*
@@ -403,6 +412,11 @@ static inline bool kvm_arm_steal_time_supported(void)
return false;
}
+static inline bool kvm_arm_mte_supported(void)
+{
+ return false;
+}
+
/*
* These functions should never actually be called without KVM support.
*/
@@ -451,6 +465,11 @@ static inline uint32_t kvm_arm_sve_get_vls(CPUState *cs)
g_assert_not_reached();
}
+static inline void kvm_arm_enable_mte(Object *cpuobj, Error **errp)
+{
+ g_assert_not_reached();
+}
+
#endif
static inline const char *gic_class_name(void)
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index b99ae185016..06b514b25c3 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -2146,7 +2146,7 @@ static void machvirt_init(MachineState *machine)
exit(1);
}
- if (vms->mte && (kvm_enabled() || hvf_enabled())) {
+ if (vms->mte && hvf_enabled()) {
error_report("mach-virt: %s does not support providing "
"MTE to the guest CPU",
current_accel_name());
@@ -2216,39 +2216,48 @@ static void machvirt_init(MachineState *machine)
}
if (vms->mte) {
- /* Create the memory region only once, but link to all cpus. */
- if (!tag_sysmem) {
- /*
- * The property exists only if MemTag is supported.
- * If it is, we must allocate the ram to back that up.
- */
- if (!object_property_find(cpuobj, "tag-memory")) {
- error_report("MTE requested, but not supported "
- "by the guest CPU");
+ if (tcg_enabled()) {
+ /* Create the memory region only once, but link to all cpus. */
+ if (!tag_sysmem) {
+ /*
+ * The property exists only if MemTag is supported.
+ * If it is, we must allocate the ram to back that up.
+ */
+ if (!object_property_find(cpuobj, "tag-memory")) {
+ error_report("MTE requested, but not supported "
+ "by the guest CPU");
+ exit(1);
+ }
+
+ tag_sysmem = g_new(MemoryRegion, 1);
+ memory_region_init(tag_sysmem, OBJECT(machine),
+ "tag-memory", UINT64_MAX / 32);
+
+ if (vms->secure) {
+ secure_tag_sysmem = g_new(MemoryRegion, 1);
+ memory_region_init(secure_tag_sysmem, OBJECT(machine),
+ "secure-tag-memory",
+ UINT64_MAX / 32);
+
+ /* As with ram, secure-tag takes precedence over tag. */
+ memory_region_add_subregion_overlap(secure_tag_sysmem,
+ 0, tag_sysmem, -1);
+ }
+ }
+
+ object_property_set_link(cpuobj, "tag-memory",
+ OBJECT(tag_sysmem), &error_abort);
+ if (vms->secure) {
+ object_property_set_link(cpuobj, "secure-tag-memory",
+ OBJECT(secure_tag_sysmem),
+ &error_abort);
+ }
+ } else if (kvm_enabled()) {
+ if (!kvm_arm_mte_supported()) {
+ error_report("MTE requested, but not supported by KVM");
exit(1);
}
-
- tag_sysmem = g_new(MemoryRegion, 1);
- memory_region_init(tag_sysmem, OBJECT(machine),
- "tag-memory", UINT64_MAX / 32);
-
- if (vms->secure) {
- secure_tag_sysmem = g_new(MemoryRegion, 1);
- memory_region_init(secure_tag_sysmem, OBJECT(machine),
- "secure-tag-memory", UINT64_MAX / 32);
-
- /* As with ram, secure-tag takes precedence over tag. */
- memory_region_add_subregion_overlap(secure_tag_sysmem, 0,
- tag_sysmem, -1);
- }
- }
-
- object_property_set_link(cpuobj, "tag-memory", OBJECT(tag_sysmem),
- &error_abort);
- if (vms->secure) {
- object_property_set_link(cpuobj, "secure-tag-memory",
- OBJECT(secure_tag_sysmem),
- &error_abort);
+ kvm_arm_enable_mte(cpuobj, &error_abort);
}
}
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index 5182ed0c911..f6a88e52ac2 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -1480,6 +1480,7 @@ void arm_cpu_post_init(Object *obj)
qdev_prop_allow_set_link_before_realize,
OBJ_PROP_LINK_STRONG);
}
+ cpu->has_mte = true;
}
#endif
}
@@ -1616,7 +1617,7 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
}
if (cpu->tag_memory) {
error_setg(errp,
- "Cannot enable %s when guest CPUs has MTE enabled",
+ "Cannot enable %s when guest CPUs has tag memory enabled",
current_accel_name());
return;
}
@@ -1996,10 +1997,10 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
}
#ifndef CONFIG_USER_ONLY
- if (cpu->tag_memory == NULL && cpu_isar_feature(aa64_mte, cpu)) {
+ if (!cpu->has_mte && cpu_isar_feature(aa64_mte, cpu)) {
/*
- * Disable the MTE feature bits if we do not have tag-memory
- * provided by the machine.
+ * Disable the MTE feature bits if we do not have the feature
+ * setup by the machine.
*/
cpu->isar.id_aa64pfr1 =
FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0);
diff --git a/target/arm/kvm.c b/target/arm/kvm.c
index 84da49332c4..9553488ecd1 100644
--- a/target/arm/kvm.c
+++ b/target/arm/kvm.c
@@ -31,6 +31,7 @@
#include "hw/boards.h"
#include "hw/irq.h"
#include "qemu/log.h"
+#include "migration/blocker.h"
const KVMCapabilityInfo kvm_arch_required_capabilities[] = {
KVM_CAP_LAST_INFO
@@ -1064,3 +1065,37 @@ bool kvm_arch_cpu_check_are_resettable(void)
void kvm_arch_accel_class_init(ObjectClass *oc)
{
}
+
+void kvm_arm_enable_mte(Object *cpuobj, Error **errp)
+{
+ static bool tried_to_enable;
+ static bool succeeded_to_enable;
+ Error *mte_migration_blocker = NULL;
+ int ret;
+
+ if (!tried_to_enable) {
+ /*
+ * MTE on KVM is enabled on a per-VM basis (and retrying doesn't make
+ * sense), and we only want a single migration blocker as well.
+ */
+ tried_to_enable = true;
+
+ ret = kvm_vm_enable_cap(kvm_state, KVM_CAP_ARM_MTE, 0);
+ if (ret) {
+ error_setg_errno(errp, -ret, "Failed to enable KVM_CAP_ARM_MTE");
+ return;
+ }
+
+ /* TODO: add proper migration support with MTE enabled */
+ error_setg(&mte_migration_blocker,
+ "Live migration disabled due to MTE enabled");
+ if (migrate_add_blocker(mte_migration_blocker, errp)) {
+ error_free(mte_migration_blocker);
+ return;
+ }
+ succeeded_to_enable = true;
+ }
+ if (succeeded_to_enable) {
+ object_property_set_bool(cpuobj, "has_mte", true, NULL);
+ }
+}
diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c
index 810db33ccbd..1893f387936 100644
--- a/target/arm/kvm64.c
+++ b/target/arm/kvm64.c
@@ -756,6 +756,11 @@ bool kvm_arm_steal_time_supported(void)
return kvm_check_extension(kvm_state, KVM_CAP_STEAL_TIME);
}
+bool kvm_arm_mte_supported(void)
+{
+ return kvm_check_extension(kvm_state, KVM_CAP_ARM_MTE);
+}
+
QEMU_BUILD_BUG_ON(KVM_ARM64_SVE_VQ_MIN != 1);
uint32_t kvm_arm_sve_get_vls(CPUState *cs)
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 05/29] target/arm: add RAZ/WI handling for DBGDTR[TX|RX]
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (3 preceding siblings ...)
2023-05-18 12:50 ` [PULL 04/29] arm/kvm: add support for MTE Peter Maydell
@ 2023-05-18 12:50 ` Peter Maydell
2023-05-18 12:50 ` [PULL 06/29] sbsa-ref: use Bochs graphics card instead of VGA Peter Maydell
` (24 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:50 UTC (permalink / raw)
To: qemu-devel
From: Alex Bennée <alex.bennee@linaro.org>
The commit b3aa2f2128 (target/arm: provide stubs for more external
debug registers) was added to handle HyperV's unconditional usage of
Debug Communications Channel. It turns out that Linux will similarly
break if you enable CONFIG_HVC_DCC "ARM JTAG DCC console".
Extend the registers we RAZ/WI set to avoid this.
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Evgeny Iakovlev <eiakovlev@linux.microsoft.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230516104420.407912-1-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/debug_helper.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c
index dfc8b2a1a5d..d41cc643b1b 100644
--- a/target/arm/debug_helper.c
+++ b/target/arm/debug_helper.c
@@ -949,8 +949,10 @@ static const ARMCPRegInfo debug_cp_reginfo[] = {
.access = PL0_R, .accessfn = access_tdcc,
.type = ARM_CP_CONST, .resetvalue = 0 },
/*
- * OSDTRRX_EL1/OSDTRTX_EL1 are used for save and restore of DBGDTRRX_EL0.
- * It is a component of the Debug Communications Channel, which is not implemented.
+ * These registers belong to the Debug Communications Channel,
+ * which is not implemented. However we implement RAZ/WI behaviour
+ * with trapping to prevent spurious SIGILLs if the guest OS does
+ * access them as the support cannot be probed for.
*/
{ .name = "OSDTRRX_EL1", .state = ARM_CP_STATE_BOTH, .cp = 14,
.opc0 = 2, .opc1 = 0, .crn = 0, .crm = 0, .opc2 = 2,
@@ -960,6 +962,11 @@ static const ARMCPRegInfo debug_cp_reginfo[] = {
.opc0 = 2, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 2,
.access = PL1_RW, .accessfn = access_tdcc,
.type = ARM_CP_CONST, .resetvalue = 0 },
+ /* DBGDTRTX_EL0/DBGDTRRX_EL0 depend on direction */
+ { .name = "DBGDTR_EL0", .state = ARM_CP_STATE_BOTH, .cp = 14,
+ .opc0 = 2, .opc1 = 3, .crn = 0, .crm = 5, .opc2 = 0,
+ .access = PL0_RW, .accessfn = access_tdcc,
+ .type = ARM_CP_CONST, .resetvalue = 0 },
/*
* OSECCR_EL1 provides a mechanism for an operating system
* to access the contents of EDECCR. EDECCR is not implemented though,
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 06/29] sbsa-ref: use Bochs graphics card instead of VGA
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (4 preceding siblings ...)
2023-05-18 12:50 ` [PULL 05/29] target/arm: add RAZ/WI handling for DBGDTR[TX|RX] Peter Maydell
@ 2023-05-18 12:50 ` Peter Maydell
2023-05-18 12:50 ` [PULL 07/29] target/arm: Split out disas_a64_legacy Peter Maydell
` (23 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:50 UTC (permalink / raw)
To: qemu-devel
From: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Bochs card is normal PCI Express card so it fits better in system with
PCI Express bus. VGA is simple legacy PCI card.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20230505120936.1097060-1-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/arm/sbsa-ref.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c
index a1562f944a6..792371fdce5 100644
--- a/hw/arm/sbsa-ref.c
+++ b/hw/arm/sbsa-ref.c
@@ -648,7 +648,7 @@ static void create_pcie(SBSAMachineState *sms)
}
}
- pci_create_simple(pci->bus, -1, "VGA");
+ pci_create_simple(pci->bus, -1, "bochs-display");
create_smmu(sms, pci->bus);
}
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 07/29] target/arm: Split out disas_a64_legacy
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (5 preceding siblings ...)
2023-05-18 12:50 ` [PULL 06/29] sbsa-ref: use Bochs graphics card instead of VGA Peter Maydell
@ 2023-05-18 12:50 ` Peter Maydell
2023-05-18 12:50 ` [PULL 08/29] target/arm: Create decodetree skeleton for A64 Peter Maydell
` (22 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:50 UTC (permalink / raw)
To: qemu-devel
From: Richard Henderson <richard.henderson@linaro.org>
Split out all of the decode stuff from aarch64_tr_translate_insn.
Call it disas_a64_legacy to indicate it will be replaced.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230512144106.3608981-2-peter.maydell@linaro.org
[PMM: Rebased]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/tcg/translate-a64.c | 82 ++++++++++++++++++----------------
1 file changed, 44 insertions(+), 38 deletions(-)
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index dff391bfe24..8a0ede96440 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -14200,6 +14200,49 @@ static bool btype_destination_ok(uint32_t insn, bool bt, int btype)
return false;
}
+/* C3.1 A64 instruction index by encoding */
+static void disas_a64_legacy(DisasContext *s, uint32_t insn)
+{
+ switch (extract32(insn, 25, 4)) {
+ case 0x0:
+ if (!extract32(insn, 31, 1) || !disas_sme(s, insn)) {
+ unallocated_encoding(s);
+ }
+ break;
+ case 0x1: case 0x3: /* UNALLOCATED */
+ unallocated_encoding(s);
+ break;
+ case 0x2:
+ if (!disas_sve(s, insn)) {
+ unallocated_encoding(s);
+ }
+ break;
+ case 0x8: case 0x9: /* Data processing - immediate */
+ disas_data_proc_imm(s, insn);
+ break;
+ case 0xa: case 0xb: /* Branch, exception generation and system insns */
+ disas_b_exc_sys(s, insn);
+ break;
+ case 0x4:
+ case 0x6:
+ case 0xc:
+ case 0xe: /* Loads and stores */
+ disas_ldst(s, insn);
+ break;
+ case 0x5:
+ case 0xd: /* Data processing - register */
+ disas_data_proc_reg(s, insn);
+ break;
+ case 0x7:
+ case 0xf: /* Data processing - SIMD and floating point */
+ disas_data_proc_simd_fp(s, insn);
+ break;
+ default:
+ assert(FALSE); /* all 15 cases should be handled above */
+ break;
+ }
+}
+
static void aarch64_tr_init_disas_context(DisasContextBase *dcbase,
CPUState *cpu)
{
@@ -14401,44 +14444,7 @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu)
disas_sme_fa64(s, insn);
}
- switch (extract32(insn, 25, 4)) {
- case 0x0:
- if (!extract32(insn, 31, 1) || !disas_sme(s, insn)) {
- unallocated_encoding(s);
- }
- break;
- case 0x1: case 0x3: /* UNALLOCATED */
- unallocated_encoding(s);
- break;
- case 0x2:
- if (!disas_sve(s, insn)) {
- unallocated_encoding(s);
- }
- break;
- case 0x8: case 0x9: /* Data processing - immediate */
- disas_data_proc_imm(s, insn);
- break;
- case 0xa: case 0xb: /* Branch, exception generation and system insns */
- disas_b_exc_sys(s, insn);
- break;
- case 0x4:
- case 0x6:
- case 0xc:
- case 0xe: /* Loads and stores */
- disas_ldst(s, insn);
- break;
- case 0x5:
- case 0xd: /* Data processing - register */
- disas_data_proc_reg(s, insn);
- break;
- case 0x7:
- case 0xf: /* Data processing - SIMD and floating point */
- disas_data_proc_simd_fp(s, insn);
- break;
- default:
- assert(FALSE); /* all 15 cases should be handled above */
- break;
- }
+ disas_a64_legacy(s, insn);
/*
* After execution of most insns, btype is reset to 0.
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 08/29] target/arm: Create decodetree skeleton for A64
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (6 preceding siblings ...)
2023-05-18 12:50 ` [PULL 07/29] target/arm: Split out disas_a64_legacy Peter Maydell
@ 2023-05-18 12:50 ` Peter Maydell
2023-05-18 12:50 ` [PULL 09/29] target/arm: Pull calls to disas_sve() and disas_sme() out of legacy decoder Peter Maydell
` (21 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:50 UTC (permalink / raw)
To: qemu-devel
The A64 translator uses a hand-written decoder for everything except
SVE or SME. It's fairly well structured, but it's becoming obvious
that it's still more painful to add instructions to than the A32
translator, because putting a new instruction into the right place in
a hand-written decoder is much harder than adding new instruction
patterns to a decodetree file.
As the first step in conversion to decodetree, create the skeleton of
the decodetree decoder; where it does not handle instructions we will
fall back to the legacy decoder (which will be for everything at the
moment, since there are no patterns in a64.decode).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-3-peter.maydell@linaro.org
---
target/arm/tcg/a64.decode | 20 ++++++++++++++++++++
target/arm/tcg/translate-a64.c | 18 +++++++++++-------
target/arm/tcg/meson.build | 1 +
3 files changed, 32 insertions(+), 7 deletions(-)
create mode 100644 target/arm/tcg/a64.decode
diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode
new file mode 100644
index 00000000000..43321bbbb05
--- /dev/null
+++ b/target/arm/tcg/a64.decode
@@ -0,0 +1,20 @@
+# AArch64 A64 allowed instruction decoding
+#
+# Copyright (c) 2023 Linaro, Ltd
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, see <http://www.gnu.org/licenses/>.
+
+#
+# This file is processed by scripts/decodetree.py
+#
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index 8a0ede96440..7862e9dd4e3 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -56,6 +56,13 @@ enum a64_shift_type {
A64_SHIFT_TYPE_ROR = 3
};
+/*
+ * Include the generated decoders.
+ */
+
+#include "decode-sme-fa64.c.inc"
+#include "decode-a64.c.inc"
+
/* Table based decoder typedefs - used when the relevant bits for decode
* are too awkwardly scattered across the instruction (eg SIMD).
*/
@@ -14100,12 +14107,6 @@ static void disas_data_proc_simd_fp(DisasContext *s, uint32_t insn)
}
}
-/*
- * Include the generated SME FA64 decoder.
- */
-
-#include "decode-sme-fa64.c.inc"
-
static bool trans_OK(DisasContext *s, arg_OK *a)
{
return true;
@@ -14444,7 +14445,10 @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu)
disas_sme_fa64(s, insn);
}
- disas_a64_legacy(s, insn);
+
+ if (!disas_a64(s, insn)) {
+ disas_a64_legacy(s, insn);
+ }
/*
* After execution of most insns, btype is reset to 0.
diff --git a/target/arm/tcg/meson.build b/target/arm/tcg/meson.build
index 4d99f6dacb3..130ed62fcd7 100644
--- a/target/arm/tcg/meson.build
+++ b/target/arm/tcg/meson.build
@@ -13,6 +13,7 @@ gen = [
decodetree.process('a32-uncond.decode', extra_args: '--static-decode=disas_a32_uncond'),
decodetree.process('t32.decode', extra_args: '--static-decode=disas_t32'),
decodetree.process('t16.decode', extra_args: ['-w', '16', '--static-decode=disas_t16']),
+ decodetree.process('a64.decode', extra_args: ['--static-decode=disas_a64']),
]
arm_ss.add(gen)
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 09/29] target/arm: Pull calls to disas_sve() and disas_sme() out of legacy decoder
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (7 preceding siblings ...)
2023-05-18 12:50 ` [PULL 08/29] target/arm: Create decodetree skeleton for A64 Peter Maydell
@ 2023-05-18 12:50 ` Peter Maydell
2023-05-18 12:50 ` [PULL 10/29] target/arm: Convert PC-rel addressing to decodetree Peter Maydell
` (20 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:50 UTC (permalink / raw)
To: qemu-devel
The SVE and SME decode is already done by decodetree. Pull the calls
to these decoders out of the legacy decoder. This doesn't change
behaviour because all the patterns in sve.decode and sme.decode
already require the bits that the legacy decoder is decoding to have
the correct values.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-4-peter.maydell@linaro.org
---
target/arm/tcg/translate-a64.c | 20 ++++----------------
1 file changed, 4 insertions(+), 16 deletions(-)
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index 7862e9dd4e3..1fd6f97b641 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -14205,19 +14205,6 @@ static bool btype_destination_ok(uint32_t insn, bool bt, int btype)
static void disas_a64_legacy(DisasContext *s, uint32_t insn)
{
switch (extract32(insn, 25, 4)) {
- case 0x0:
- if (!extract32(insn, 31, 1) || !disas_sme(s, insn)) {
- unallocated_encoding(s);
- }
- break;
- case 0x1: case 0x3: /* UNALLOCATED */
- unallocated_encoding(s);
- break;
- case 0x2:
- if (!disas_sve(s, insn)) {
- unallocated_encoding(s);
- }
- break;
case 0x8: case 0x9: /* Data processing - immediate */
disas_data_proc_imm(s, insn);
break;
@@ -14239,7 +14226,7 @@ static void disas_a64_legacy(DisasContext *s, uint32_t insn)
disas_data_proc_simd_fp(s, insn);
break;
default:
- assert(FALSE); /* all 15 cases should be handled above */
+ unallocated_encoding(s);
break;
}
}
@@ -14445,8 +14432,9 @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu)
disas_sme_fa64(s, insn);
}
-
- if (!disas_a64(s, insn)) {
+ if (!disas_a64(s, insn) &&
+ !disas_sme(s, insn) &&
+ !disas_sve(s, insn)) {
disas_a64_legacy(s, insn);
}
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 10/29] target/arm: Convert PC-rel addressing to decodetree
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (8 preceding siblings ...)
2023-05-18 12:50 ` [PULL 09/29] target/arm: Pull calls to disas_sve() and disas_sme() out of legacy decoder Peter Maydell
@ 2023-05-18 12:50 ` Peter Maydell
2023-05-18 12:50 ` [PULL 11/29] target/arm: Split gen_add_CC and gen_sub_CC Peter Maydell
` (19 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:50 UTC (permalink / raw)
To: qemu-devel
From: Richard Henderson <richard.henderson@linaro.org>
Convert the ADR and ADRP instructions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230512144106.3608981-5-peter.maydell@linaro.org
[PMM: Rebased]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/tcg/a64.decode | 13 ++++++++++++
target/arm/tcg/translate-a64.c | 38 +++++++++++++---------------------
2 files changed, 27 insertions(+), 24 deletions(-)
diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode
index 43321bbbb05..bcf46fc37d7 100644
--- a/target/arm/tcg/a64.decode
+++ b/target/arm/tcg/a64.decode
@@ -18,3 +18,16 @@
#
# This file is processed by scripts/decodetree.py
#
+
+&ri rd imm
+
+
+### Data Processing - Immediate
+
+# PC-rel addressing
+
+%imm_pcrel 5:s19 29:2
+@pcrel . .. ..... ................... rd:5 &ri imm=%imm_pcrel
+
+ADR 0 .. 10000 ................... ..... @pcrel
+ADRP 1 .. 10000 ................... ..... @pcrel
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index 1fd6f97b641..ffcd05eb38a 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -4179,31 +4179,24 @@ static void disas_ldst(DisasContext *s, uint32_t insn)
}
}
-/* PC-rel. addressing
- * 31 30 29 28 24 23 5 4 0
- * +----+-------+-----------+-------------------+------+
- * | op | immlo | 1 0 0 0 0 | immhi | Rd |
- * +----+-------+-----------+-------------------+------+
+/*
+ * PC-rel. addressing
*/
-static void disas_pc_rel_adr(DisasContext *s, uint32_t insn)
+
+static bool trans_ADR(DisasContext *s, arg_ri *a)
{
- unsigned int page, rd;
- int64_t offset;
+ gen_pc_plus_diff(s, cpu_reg(s, a->rd), a->imm);
+ return true;
+}
- page = extract32(insn, 31, 1);
- /* SignExtend(immhi:immlo) -> offset */
- offset = sextract64(insn, 5, 19);
- offset = offset << 2 | extract32(insn, 29, 2);
- rd = extract32(insn, 0, 5);
+static bool trans_ADRP(DisasContext *s, arg_ri *a)
+{
+ int64_t offset = (int64_t)a->imm << 12;
- if (page) {
- /* ADRP (page based) */
- offset <<= 12;
- /* The page offset is ok for CF_PCREL. */
- offset -= s->pc_curr & 0xfff;
- }
-
- gen_pc_plus_diff(s, cpu_reg(s, rd), offset);
+ /* The page offset is ok for CF_PCREL. */
+ offset -= s->pc_curr & 0xfff;
+ gen_pc_plus_diff(s, cpu_reg(s, a->rd), offset);
+ return true;
}
/*
@@ -4656,9 +4649,6 @@ static void disas_extract(DisasContext *s, uint32_t insn)
static void disas_data_proc_imm(DisasContext *s, uint32_t insn)
{
switch (extract32(insn, 23, 6)) {
- case 0x20: case 0x21: /* PC-rel. addressing */
- disas_pc_rel_adr(s, insn);
- break;
case 0x22: /* Add/subtract (immediate) */
disas_add_sub_imm(s, insn);
break;
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 11/29] target/arm: Split gen_add_CC and gen_sub_CC
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (9 preceding siblings ...)
2023-05-18 12:50 ` [PULL 10/29] target/arm: Convert PC-rel addressing to decodetree Peter Maydell
@ 2023-05-18 12:50 ` Peter Maydell
2023-05-18 12:50 ` [PULL 12/29] target/arm: Convert Add/subtract (immediate) to decodetree Peter Maydell
` (18 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:50 UTC (permalink / raw)
To: qemu-devel
From: Richard Henderson <richard.henderson@linaro.org>
Split out specific 32-bit and 64-bit functions.
These carry the same signature as tcg_gen_add_i64,
and so will be easier to pass as callbacks.
Retain gen_add_CC and gen_sub_CC during conversion.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230512144106.3608981-6-peter.maydell@linaro.org
[PMM: rebased]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/tcg/translate-a64.c | 149 +++++++++++++++++++--------------
1 file changed, 84 insertions(+), 65 deletions(-)
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index ffcd05eb38a..7a633abf830 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -682,83 +682,102 @@ static inline void gen_logic_CC(int sf, TCGv_i64 result)
}
/* dest = T0 + T1; compute C, N, V and Z flags */
+static void gen_add64_CC(TCGv_i64 dest, TCGv_i64 t0, TCGv_i64 t1)
+{
+ TCGv_i64 result, flag, tmp;
+ result = tcg_temp_new_i64();
+ flag = tcg_temp_new_i64();
+ tmp = tcg_temp_new_i64();
+
+ tcg_gen_movi_i64(tmp, 0);
+ tcg_gen_add2_i64(result, flag, t0, tmp, t1, tmp);
+
+ tcg_gen_extrl_i64_i32(cpu_CF, flag);
+
+ gen_set_NZ64(result);
+
+ tcg_gen_xor_i64(flag, result, t0);
+ tcg_gen_xor_i64(tmp, t0, t1);
+ tcg_gen_andc_i64(flag, flag, tmp);
+ tcg_gen_extrh_i64_i32(cpu_VF, flag);
+
+ tcg_gen_mov_i64(dest, result);
+}
+
+static void gen_add32_CC(TCGv_i64 dest, TCGv_i64 t0, TCGv_i64 t1)
+{
+ TCGv_i32 t0_32 = tcg_temp_new_i32();
+ TCGv_i32 t1_32 = tcg_temp_new_i32();
+ TCGv_i32 tmp = tcg_temp_new_i32();
+
+ tcg_gen_movi_i32(tmp, 0);
+ tcg_gen_extrl_i64_i32(t0_32, t0);
+ tcg_gen_extrl_i64_i32(t1_32, t1);
+ tcg_gen_add2_i32(cpu_NF, cpu_CF, t0_32, tmp, t1_32, tmp);
+ tcg_gen_mov_i32(cpu_ZF, cpu_NF);
+ tcg_gen_xor_i32(cpu_VF, cpu_NF, t0_32);
+ tcg_gen_xor_i32(tmp, t0_32, t1_32);
+ tcg_gen_andc_i32(cpu_VF, cpu_VF, tmp);
+ tcg_gen_extu_i32_i64(dest, cpu_NF);
+}
+
static void gen_add_CC(int sf, TCGv_i64 dest, TCGv_i64 t0, TCGv_i64 t1)
{
if (sf) {
- TCGv_i64 result, flag, tmp;
- result = tcg_temp_new_i64();
- flag = tcg_temp_new_i64();
- tmp = tcg_temp_new_i64();
-
- tcg_gen_movi_i64(tmp, 0);
- tcg_gen_add2_i64(result, flag, t0, tmp, t1, tmp);
-
- tcg_gen_extrl_i64_i32(cpu_CF, flag);
-
- gen_set_NZ64(result);
-
- tcg_gen_xor_i64(flag, result, t0);
- tcg_gen_xor_i64(tmp, t0, t1);
- tcg_gen_andc_i64(flag, flag, tmp);
- tcg_gen_extrh_i64_i32(cpu_VF, flag);
-
- tcg_gen_mov_i64(dest, result);
+ gen_add64_CC(dest, t0, t1);
} else {
- /* 32 bit arithmetic */
- TCGv_i32 t0_32 = tcg_temp_new_i32();
- TCGv_i32 t1_32 = tcg_temp_new_i32();
- TCGv_i32 tmp = tcg_temp_new_i32();
-
- tcg_gen_movi_i32(tmp, 0);
- tcg_gen_extrl_i64_i32(t0_32, t0);
- tcg_gen_extrl_i64_i32(t1_32, t1);
- tcg_gen_add2_i32(cpu_NF, cpu_CF, t0_32, tmp, t1_32, tmp);
- tcg_gen_mov_i32(cpu_ZF, cpu_NF);
- tcg_gen_xor_i32(cpu_VF, cpu_NF, t0_32);
- tcg_gen_xor_i32(tmp, t0_32, t1_32);
- tcg_gen_andc_i32(cpu_VF, cpu_VF, tmp);
- tcg_gen_extu_i32_i64(dest, cpu_NF);
+ gen_add32_CC(dest, t0, t1);
}
}
/* dest = T0 - T1; compute C, N, V and Z flags */
+static void gen_sub64_CC(TCGv_i64 dest, TCGv_i64 t0, TCGv_i64 t1)
+{
+ /* 64 bit arithmetic */
+ TCGv_i64 result, flag, tmp;
+
+ result = tcg_temp_new_i64();
+ flag = tcg_temp_new_i64();
+ tcg_gen_sub_i64(result, t0, t1);
+
+ gen_set_NZ64(result);
+
+ tcg_gen_setcond_i64(TCG_COND_GEU, flag, t0, t1);
+ tcg_gen_extrl_i64_i32(cpu_CF, flag);
+
+ tcg_gen_xor_i64(flag, result, t0);
+ tmp = tcg_temp_new_i64();
+ tcg_gen_xor_i64(tmp, t0, t1);
+ tcg_gen_and_i64(flag, flag, tmp);
+ tcg_gen_extrh_i64_i32(cpu_VF, flag);
+ tcg_gen_mov_i64(dest, result);
+}
+
+static void gen_sub32_CC(TCGv_i64 dest, TCGv_i64 t0, TCGv_i64 t1)
+{
+ /* 32 bit arithmetic */
+ TCGv_i32 t0_32 = tcg_temp_new_i32();
+ TCGv_i32 t1_32 = tcg_temp_new_i32();
+ TCGv_i32 tmp;
+
+ tcg_gen_extrl_i64_i32(t0_32, t0);
+ tcg_gen_extrl_i64_i32(t1_32, t1);
+ tcg_gen_sub_i32(cpu_NF, t0_32, t1_32);
+ tcg_gen_mov_i32(cpu_ZF, cpu_NF);
+ tcg_gen_setcond_i32(TCG_COND_GEU, cpu_CF, t0_32, t1_32);
+ tcg_gen_xor_i32(cpu_VF, cpu_NF, t0_32);
+ tmp = tcg_temp_new_i32();
+ tcg_gen_xor_i32(tmp, t0_32, t1_32);
+ tcg_gen_and_i32(cpu_VF, cpu_VF, tmp);
+ tcg_gen_extu_i32_i64(dest, cpu_NF);
+}
+
static void gen_sub_CC(int sf, TCGv_i64 dest, TCGv_i64 t0, TCGv_i64 t1)
{
if (sf) {
- /* 64 bit arithmetic */
- TCGv_i64 result, flag, tmp;
-
- result = tcg_temp_new_i64();
- flag = tcg_temp_new_i64();
- tcg_gen_sub_i64(result, t0, t1);
-
- gen_set_NZ64(result);
-
- tcg_gen_setcond_i64(TCG_COND_GEU, flag, t0, t1);
- tcg_gen_extrl_i64_i32(cpu_CF, flag);
-
- tcg_gen_xor_i64(flag, result, t0);
- tmp = tcg_temp_new_i64();
- tcg_gen_xor_i64(tmp, t0, t1);
- tcg_gen_and_i64(flag, flag, tmp);
- tcg_gen_extrh_i64_i32(cpu_VF, flag);
- tcg_gen_mov_i64(dest, result);
+ gen_sub64_CC(dest, t0, t1);
} else {
- /* 32 bit arithmetic */
- TCGv_i32 t0_32 = tcg_temp_new_i32();
- TCGv_i32 t1_32 = tcg_temp_new_i32();
- TCGv_i32 tmp;
-
- tcg_gen_extrl_i64_i32(t0_32, t0);
- tcg_gen_extrl_i64_i32(t1_32, t1);
- tcg_gen_sub_i32(cpu_NF, t0_32, t1_32);
- tcg_gen_mov_i32(cpu_ZF, cpu_NF);
- tcg_gen_setcond_i32(TCG_COND_GEU, cpu_CF, t0_32, t1_32);
- tcg_gen_xor_i32(cpu_VF, cpu_NF, t0_32);
- tmp = tcg_temp_new_i32();
- tcg_gen_xor_i32(tmp, t0_32, t1_32);
- tcg_gen_and_i32(cpu_VF, cpu_VF, tmp);
- tcg_gen_extu_i32_i64(dest, cpu_NF);
+ gen_sub32_CC(dest, t0, t1);
}
}
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 12/29] target/arm: Convert Add/subtract (immediate) to decodetree
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (10 preceding siblings ...)
2023-05-18 12:50 ` [PULL 11/29] target/arm: Split gen_add_CC and gen_sub_CC Peter Maydell
@ 2023-05-18 12:50 ` Peter Maydell
2023-05-18 12:50 ` [PULL 13/29] target/arm: Convert Add/subtract (immediate with tags) " Peter Maydell
` (17 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:50 UTC (permalink / raw)
To: qemu-devel
From: Richard Henderson <richard.henderson@linaro.org>
Convert the ADD and SUB (immediate) instructions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230512144106.3608981-7-peter.maydell@linaro.org
[PMM: Rebased; adjusted to use translate.h's TRANS macro]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/tcg/translate.h | 5 +++
target/arm/tcg/a64.decode | 17 ++++++++
target/arm/tcg/translate-a64.c | 73 ++++++++++------------------------
3 files changed, 42 insertions(+), 53 deletions(-)
diff --git a/target/arm/tcg/translate.h b/target/arm/tcg/translate.h
index f02d4685b4c..a9d1f4adc28 100644
--- a/target/arm/tcg/translate.h
+++ b/target/arm/tcg/translate.h
@@ -220,6 +220,11 @@ static inline int rsub_8(DisasContext *s, int x)
return 8 - x;
}
+static inline int shl_12(DisasContext *s, int x)
+{
+ return x << 12;
+}
+
static inline int neon_3same_fp_size(DisasContext *s, int x)
{
/* Convert 0==fp32, 1==fp16 into a MO_* value */
diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode
index bcf46fc37d7..30c2ac7e271 100644
--- a/target/arm/tcg/a64.decode
+++ b/target/arm/tcg/a64.decode
@@ -20,6 +20,7 @@
#
&ri rd imm
+&rri_sf rd rn imm sf
### Data Processing - Immediate
@@ -31,3 +32,19 @@
ADR 0 .. 10000 ................... ..... @pcrel
ADRP 1 .. 10000 ................... ..... @pcrel
+
+# Add/subtract (immediate)
+
+%imm12_sh12 10:12 !function=shl_12
+@addsub_imm sf:1 .. ...... . imm:12 rn:5 rd:5
+@addsub_imm12 sf:1 .. ...... . ............ rn:5 rd:5 imm=%imm12_sh12
+
+ADD_i . 00 100010 0 ............ ..... ..... @addsub_imm
+ADD_i . 00 100010 1 ............ ..... ..... @addsub_imm12
+ADDS_i . 01 100010 0 ............ ..... ..... @addsub_imm
+ADDS_i . 01 100010 1 ............ ..... ..... @addsub_imm12
+
+SUB_i . 10 100010 0 ............ ..... ..... @addsub_imm
+SUB_i . 10 100010 1 ............ ..... ..... @addsub_imm12
+SUBS_i . 11 100010 0 ............ ..... ..... @addsub_imm
+SUBS_i . 11 100010 1 ............ ..... ..... @addsub_imm12
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index 7a633abf830..2dd0df7286e 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -4198,6 +4198,22 @@ static void disas_ldst(DisasContext *s, uint32_t insn)
}
}
+typedef void ArithTwoOp(TCGv_i64, TCGv_i64, TCGv_i64);
+
+static bool gen_rri(DisasContext *s, arg_rri_sf *a,
+ bool rd_sp, bool rn_sp, ArithTwoOp *fn)
+{
+ TCGv_i64 tcg_rn = rn_sp ? cpu_reg_sp(s, a->rn) : cpu_reg(s, a->rn);
+ TCGv_i64 tcg_rd = rd_sp ? cpu_reg_sp(s, a->rd) : cpu_reg(s, a->rd);
+ TCGv_i64 tcg_imm = tcg_constant_i64(a->imm);
+
+ fn(tcg_rd, tcg_rn, tcg_imm);
+ if (!a->sf) {
+ tcg_gen_ext32u_i64(tcg_rd, tcg_rd);
+ }
+ return true;
+}
+
/*
* PC-rel. addressing
*/
@@ -4220,57 +4236,11 @@ static bool trans_ADRP(DisasContext *s, arg_ri *a)
/*
* Add/subtract (immediate)
- *
- * 31 30 29 28 23 22 21 10 9 5 4 0
- * +--+--+--+-------------+--+-------------+-----+-----+
- * |sf|op| S| 1 0 0 0 1 0 |sh| imm12 | Rn | Rd |
- * +--+--+--+-------------+--+-------------+-----+-----+
- *
- * sf: 0 -> 32bit, 1 -> 64bit
- * op: 0 -> add , 1 -> sub
- * S: 1 -> set flags
- * sh: 1 -> LSL imm by 12
*/
-static void disas_add_sub_imm(DisasContext *s, uint32_t insn)
-{
- int rd = extract32(insn, 0, 5);
- int rn = extract32(insn, 5, 5);
- uint64_t imm = extract32(insn, 10, 12);
- bool shift = extract32(insn, 22, 1);
- bool setflags = extract32(insn, 29, 1);
- bool sub_op = extract32(insn, 30, 1);
- bool is_64bit = extract32(insn, 31, 1);
-
- TCGv_i64 tcg_rn = cpu_reg_sp(s, rn);
- TCGv_i64 tcg_rd = setflags ? cpu_reg(s, rd) : cpu_reg_sp(s, rd);
- TCGv_i64 tcg_result;
-
- if (shift) {
- imm <<= 12;
- }
-
- tcg_result = tcg_temp_new_i64();
- if (!setflags) {
- if (sub_op) {
- tcg_gen_subi_i64(tcg_result, tcg_rn, imm);
- } else {
- tcg_gen_addi_i64(tcg_result, tcg_rn, imm);
- }
- } else {
- TCGv_i64 tcg_imm = tcg_constant_i64(imm);
- if (sub_op) {
- gen_sub_CC(is_64bit, tcg_result, tcg_rn, tcg_imm);
- } else {
- gen_add_CC(is_64bit, tcg_result, tcg_rn, tcg_imm);
- }
- }
-
- if (is_64bit) {
- tcg_gen_mov_i64(tcg_rd, tcg_result);
- } else {
- tcg_gen_ext32u_i64(tcg_rd, tcg_result);
- }
-}
+TRANS(ADD_i, gen_rri, a, 1, 1, tcg_gen_add_i64)
+TRANS(SUB_i, gen_rri, a, 1, 1, tcg_gen_sub_i64)
+TRANS(ADDS_i, gen_rri, a, 0, 1, a->sf ? gen_add64_CC : gen_add32_CC)
+TRANS(SUBS_i, gen_rri, a, 0, 1, a->sf ? gen_sub64_CC : gen_sub32_CC)
/*
* Add/subtract (immediate, with tags)
@@ -4668,9 +4638,6 @@ static void disas_extract(DisasContext *s, uint32_t insn)
static void disas_data_proc_imm(DisasContext *s, uint32_t insn)
{
switch (extract32(insn, 23, 6)) {
- case 0x22: /* Add/subtract (immediate) */
- disas_add_sub_imm(s, insn);
- break;
case 0x23: /* Add/subtract (immediate, with tags) */
disas_add_sub_imm_with_tags(s, insn);
break;
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 13/29] target/arm: Convert Add/subtract (immediate with tags) to decodetree
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (11 preceding siblings ...)
2023-05-18 12:50 ` [PULL 12/29] target/arm: Convert Add/subtract (immediate) to decodetree Peter Maydell
@ 2023-05-18 12:50 ` Peter Maydell
2023-05-18 12:50 ` [PULL 14/29] target/arm: Replace bitmask64 with MAKE_64BIT_MASK Peter Maydell
` (16 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:50 UTC (permalink / raw)
To: qemu-devel
From: Richard Henderson <richard.henderson@linaro.org>
Convert the ADDG and SUBG (immediate) instructions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230512144106.3608981-8-peter.maydell@linaro.org
[PMM: Rebased; use TRANS_FEAT()]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/tcg/a64.decode | 8 +++++++
target/arm/tcg/translate-a64.c | 38 ++++++++++------------------------
2 files changed, 19 insertions(+), 27 deletions(-)
diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode
index 30c2ac7e271..ed03d9e1349 100644
--- a/target/arm/tcg/a64.decode
+++ b/target/arm/tcg/a64.decode
@@ -48,3 +48,11 @@ SUB_i . 10 100010 0 ............ ..... ..... @addsub_imm
SUB_i . 10 100010 1 ............ ..... ..... @addsub_imm12
SUBS_i . 11 100010 0 ............ ..... ..... @addsub_imm
SUBS_i . 11 100010 1 ............ ..... ..... @addsub_imm12
+
+# Add/subtract (immediate with tags)
+
+&rri_tag rd rn uimm6 uimm4
+@addsub_imm_tag . .. ...... . uimm6:6 .. uimm4:4 rn:5 rd:5 &rri_tag
+
+ADDG_i 1 00 100011 0 ...... 00 .... ..... ..... @addsub_imm_tag
+SUBG_i 1 10 100011 0 ...... 00 .... ..... ..... @addsub_imm_tag
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index 2dd0df7286e..8fa08cc2518 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -4244,49 +4244,36 @@ TRANS(SUBS_i, gen_rri, a, 0, 1, a->sf ? gen_sub64_CC : gen_sub32_CC)
/*
* Add/subtract (immediate, with tags)
- *
- * 31 30 29 28 23 22 21 16 14 10 9 5 4 0
- * +--+--+--+-------------+--+---------+--+-------+-----+-----+
- * |sf|op| S| 1 0 0 0 1 1 |o2| uimm6 |o3| uimm4 | Rn | Rd |
- * +--+--+--+-------------+--+---------+--+-------+-----+-----+
- *
- * op: 0 -> add, 1 -> sub
*/
-static void disas_add_sub_imm_with_tags(DisasContext *s, uint32_t insn)
+
+static bool gen_add_sub_imm_with_tags(DisasContext *s, arg_rri_tag *a,
+ bool sub_op)
{
- int rd = extract32(insn, 0, 5);
- int rn = extract32(insn, 5, 5);
- int uimm4 = extract32(insn, 10, 4);
- int uimm6 = extract32(insn, 16, 6);
- bool sub_op = extract32(insn, 30, 1);
TCGv_i64 tcg_rn, tcg_rd;
int imm;
- /* Test all of sf=1, S=0, o2=0, o3=0. */
- if ((insn & 0xa040c000u) != 0x80000000u ||
- !dc_isar_feature(aa64_mte_insn_reg, s)) {
- unallocated_encoding(s);
- return;
- }
-
- imm = uimm6 << LOG2_TAG_GRANULE;
+ imm = a->uimm6 << LOG2_TAG_GRANULE;
if (sub_op) {
imm = -imm;
}
- tcg_rn = cpu_reg_sp(s, rn);
- tcg_rd = cpu_reg_sp(s, rd);
+ tcg_rn = cpu_reg_sp(s, a->rn);
+ tcg_rd = cpu_reg_sp(s, a->rd);
if (s->ata) {
gen_helper_addsubg(tcg_rd, cpu_env, tcg_rn,
tcg_constant_i32(imm),
- tcg_constant_i32(uimm4));
+ tcg_constant_i32(a->uimm4));
} else {
tcg_gen_addi_i64(tcg_rd, tcg_rn, imm);
gen_address_with_allocation_tag0(tcg_rd, tcg_rd);
}
+ return true;
}
+TRANS_FEAT(ADDG_i, aa64_mte_insn_reg, gen_add_sub_imm_with_tags, a, false)
+TRANS_FEAT(SUBG_i, aa64_mte_insn_reg, gen_add_sub_imm_with_tags, a, true)
+
/* The input should be a value in the bottom e bits (with higher
* bits zero); returns that value replicated into every element
* of size e in a 64 bit integer.
@@ -4638,9 +4625,6 @@ static void disas_extract(DisasContext *s, uint32_t insn)
static void disas_data_proc_imm(DisasContext *s, uint32_t insn)
{
switch (extract32(insn, 23, 6)) {
- case 0x23: /* Add/subtract (immediate, with tags) */
- disas_add_sub_imm_with_tags(s, insn);
- break;
case 0x24: /* Logical (immediate) */
disas_logic_imm(s, insn);
break;
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 14/29] target/arm: Replace bitmask64 with MAKE_64BIT_MASK
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (12 preceding siblings ...)
2023-05-18 12:50 ` [PULL 13/29] target/arm: Convert Add/subtract (immediate with tags) " Peter Maydell
@ 2023-05-18 12:50 ` Peter Maydell
2023-05-18 12:50 ` [PULL 15/29] target/arm: Convert Logical (immediate) to decodetree Peter Maydell
` (15 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:50 UTC (permalink / raw)
To: qemu-devel
From: Richard Henderson <richard.henderson@linaro.org>
Use the bitops.h macro rather than rolling our own here.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230512144106.3608981-9-peter.maydell@linaro.org
---
target/arm/tcg/translate-a64.c | 11 ++---------
1 file changed, 2 insertions(+), 9 deletions(-)
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index 8fa08cc2518..c744477d71a 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -4288,13 +4288,6 @@ static uint64_t bitfield_replicate(uint64_t mask, unsigned int e)
return mask;
}
-/* Return a value with the bottom len bits set (where 0 < len <= 64) */
-static inline uint64_t bitmask64(unsigned int length)
-{
- assert(length > 0 && length <= 64);
- return ~0ULL >> (64 - length);
-}
-
/* Simplified variant of pseudocode DecodeBitMasks() for the case where we
* only require the wmask. Returns false if the imms/immr/immn are a reserved
* value (ie should cause a guest UNDEF exception), and true if they are
@@ -4350,10 +4343,10 @@ bool logic_imm_decode_wmask(uint64_t *result, unsigned int immn,
/* Create the value of one element: s+1 set bits rotated
* by r within the element (which is e bits wide)...
*/
- mask = bitmask64(s + 1);
+ mask = MAKE_64BIT_MASK(0, s + 1);
if (r) {
mask = (mask >> r) | (mask << (e - r));
- mask &= bitmask64(e);
+ mask &= MAKE_64BIT_MASK(0, e);
}
/* ...then replicate the element over the whole 64 bit value */
mask = bitfield_replicate(mask, e);
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 15/29] target/arm: Convert Logical (immediate) to decodetree
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (13 preceding siblings ...)
2023-05-18 12:50 ` [PULL 14/29] target/arm: Replace bitmask64 with MAKE_64BIT_MASK Peter Maydell
@ 2023-05-18 12:50 ` Peter Maydell
2023-05-18 12:50 ` [PULL 16/29] target/arm: Convert Move wide " Peter Maydell
` (14 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:50 UTC (permalink / raw)
To: qemu-devel
From: Richard Henderson <richard.henderson@linaro.org>
Convert the ADD, ORR, EOR, ANDS (immediate) instructions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230512144106.3608981-10-peter.maydell@linaro.org
[PMM: rebased]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/tcg/a64.decode | 15 ++++++
target/arm/tcg/translate-a64.c | 94 +++++++++++-----------------------
2 files changed, 44 insertions(+), 65 deletions(-)
diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode
index ed03d9e1349..1933afa457b 100644
--- a/target/arm/tcg/a64.decode
+++ b/target/arm/tcg/a64.decode
@@ -56,3 +56,18 @@ SUBS_i . 11 100010 1 ............ ..... ..... @addsub_imm12
ADDG_i 1 00 100011 0 ...... 00 .... ..... ..... @addsub_imm_tag
SUBG_i 1 10 100011 0 ...... 00 .... ..... ..... @addsub_imm_tag
+
+# Logical (immediate)
+
+&rri_log rd rn sf dbm
+@logic_imm_64 1 .. ...... dbm:13 rn:5 rd:5 &rri_log sf=1
+@logic_imm_32 0 .. ...... 0 dbm:12 rn:5 rd:5 &rri_log sf=0
+
+AND_i . 00 100100 . ...... ...... ..... ..... @logic_imm_64
+AND_i . 00 100100 . ...... ...... ..... ..... @logic_imm_32
+ORR_i . 01 100100 . ...... ...... ..... ..... @logic_imm_64
+ORR_i . 01 100100 . ...... ...... ..... ..... @logic_imm_32
+EOR_i . 10 100100 . ...... ...... ..... ..... @logic_imm_64
+EOR_i . 10 100100 . ...... ...... ..... ..... @logic_imm_32
+ANDS_i . 11 100100 . ...... ...... ..... ..... @logic_imm_64
+ANDS_i . 11 100100 . ...... ...... ..... ..... @logic_imm_32
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index c744477d71a..4192f951d48 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -4288,7 +4288,12 @@ static uint64_t bitfield_replicate(uint64_t mask, unsigned int e)
return mask;
}
-/* Simplified variant of pseudocode DecodeBitMasks() for the case where we
+/*
+ * Logical (immediate)
+ */
+
+/*
+ * Simplified variant of pseudocode DecodeBitMasks() for the case where we
* only require the wmask. Returns false if the imms/immr/immn are a reserved
* value (ie should cause a guest UNDEF exception), and true if they are
* valid, in which case the decoded bit pattern is written to result.
@@ -4354,78 +4359,40 @@ bool logic_imm_decode_wmask(uint64_t *result, unsigned int immn,
return true;
}
-/* Logical (immediate)
- * 31 30 29 28 23 22 21 16 15 10 9 5 4 0
- * +----+-----+-------------+---+------+------+------+------+
- * | sf | opc | 1 0 0 1 0 0 | N | immr | imms | Rn | Rd |
- * +----+-----+-------------+---+------+------+------+------+
- */
-static void disas_logic_imm(DisasContext *s, uint32_t insn)
+static bool gen_rri_log(DisasContext *s, arg_rri_log *a, bool set_cc,
+ void (*fn)(TCGv_i64, TCGv_i64, int64_t))
{
- unsigned int sf, opc, is_n, immr, imms, rn, rd;
TCGv_i64 tcg_rd, tcg_rn;
- uint64_t wmask;
- bool is_and = false;
+ uint64_t imm;
- sf = extract32(insn, 31, 1);
- opc = extract32(insn, 29, 2);
- is_n = extract32(insn, 22, 1);
- immr = extract32(insn, 16, 6);
- imms = extract32(insn, 10, 6);
- rn = extract32(insn, 5, 5);
- rd = extract32(insn, 0, 5);
-
- if (!sf && is_n) {
- unallocated_encoding(s);
- return;
+ /* Some immediate field values are reserved. */
+ if (!logic_imm_decode_wmask(&imm, extract32(a->dbm, 12, 1),
+ extract32(a->dbm, 0, 6),
+ extract32(a->dbm, 6, 6))) {
+ return false;
+ }
+ if (!a->sf) {
+ imm &= 0xffffffffull;
}
- if (opc == 0x3) { /* ANDS */
- tcg_rd = cpu_reg(s, rd);
- } else {
- tcg_rd = cpu_reg_sp(s, rd);
- }
- tcg_rn = cpu_reg(s, rn);
+ tcg_rd = set_cc ? cpu_reg(s, a->rd) : cpu_reg_sp(s, a->rd);
+ tcg_rn = cpu_reg(s, a->rn);
- if (!logic_imm_decode_wmask(&wmask, is_n, imms, immr)) {
- /* some immediate field values are reserved */
- unallocated_encoding(s);
- return;
+ fn(tcg_rd, tcg_rn, imm);
+ if (set_cc) {
+ gen_logic_CC(a->sf, tcg_rd);
}
-
- if (!sf) {
- wmask &= 0xffffffff;
- }
-
- switch (opc) {
- case 0x3: /* ANDS */
- case 0x0: /* AND */
- tcg_gen_andi_i64(tcg_rd, tcg_rn, wmask);
- is_and = true;
- break;
- case 0x1: /* ORR */
- tcg_gen_ori_i64(tcg_rd, tcg_rn, wmask);
- break;
- case 0x2: /* EOR */
- tcg_gen_xori_i64(tcg_rd, tcg_rn, wmask);
- break;
- default:
- assert(FALSE); /* must handle all above */
- break;
- }
-
- if (!sf && !is_and) {
- /* zero extend final result; we know we can skip this for AND
- * since the immediate had the high 32 bits clear.
- */
+ if (!a->sf) {
tcg_gen_ext32u_i64(tcg_rd, tcg_rd);
}
-
- if (opc == 3) { /* ANDS */
- gen_logic_CC(sf, tcg_rd);
- }
+ return true;
}
+TRANS(AND_i, gen_rri_log, a, false, tcg_gen_andi_i64)
+TRANS(ORR_i, gen_rri_log, a, false, tcg_gen_ori_i64)
+TRANS(EOR_i, gen_rri_log, a, false, tcg_gen_xori_i64)
+TRANS(ANDS_i, gen_rri_log, a, true, tcg_gen_andi_i64)
+
/*
* Move wide (immediate)
*
@@ -4618,9 +4585,6 @@ static void disas_extract(DisasContext *s, uint32_t insn)
static void disas_data_proc_imm(DisasContext *s, uint32_t insn)
{
switch (extract32(insn, 23, 6)) {
- case 0x24: /* Logical (immediate) */
- disas_logic_imm(s, insn);
- break;
case 0x25: /* Move wide (immediate) */
disas_movw_imm(s, insn);
break;
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 16/29] target/arm: Convert Move wide (immediate) to decodetree
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (14 preceding siblings ...)
2023-05-18 12:50 ` [PULL 15/29] target/arm: Convert Logical (immediate) to decodetree Peter Maydell
@ 2023-05-18 12:50 ` Peter Maydell
2023-05-18 12:50 ` [PULL 17/29] target/arm: Convert Bitfield " Peter Maydell
` (13 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:50 UTC (permalink / raw)
To: qemu-devel
From: Richard Henderson <richard.henderson@linaro.org>
Convert the MON, MOVZ, MOVK instructions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230512144106.3608981-11-peter.maydell@linaro.org
[PMM: Rebased]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/tcg/a64.decode | 13 ++++++
target/arm/tcg/translate-a64.c | 73 ++++++++++++++--------------------
2 files changed, 42 insertions(+), 44 deletions(-)
diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode
index 1933afa457b..350b37c8f37 100644
--- a/target/arm/tcg/a64.decode
+++ b/target/arm/tcg/a64.decode
@@ -71,3 +71,16 @@ EOR_i . 10 100100 . ...... ...... ..... ..... @logic_imm_64
EOR_i . 10 100100 . ...... ...... ..... ..... @logic_imm_32
ANDS_i . 11 100100 . ...... ...... ..... ..... @logic_imm_64
ANDS_i . 11 100100 . ...... ...... ..... ..... @logic_imm_32
+
+# Move wide (immediate)
+
+&movw rd sf imm hw
+@movw_64 1 .. ...... hw:2 imm:16 rd:5 &movw sf=1
+@movw_32 0 .. ...... 0 hw:1 imm:16 rd:5 &movw sf=0
+
+MOVN . 00 100101 .. ................ ..... @movw_64
+MOVN . 00 100101 .. ................ ..... @movw_32
+MOVZ . 10 100101 .. ................ ..... @movw_64
+MOVZ . 10 100101 .. ................ ..... @movw_32
+MOVK . 11 100101 .. ................ ..... @movw_64
+MOVK . 11 100101 .. ................ ..... @movw_32
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index 4192f951d48..c9117f0a405 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -4395,52 +4395,40 @@ TRANS(ANDS_i, gen_rri_log, a, true, tcg_gen_andi_i64)
/*
* Move wide (immediate)
- *
- * 31 30 29 28 23 22 21 20 5 4 0
- * +--+-----+-------------+-----+----------------+------+
- * |sf| opc | 1 0 0 1 0 1 | hw | imm16 | Rd |
- * +--+-----+-------------+-----+----------------+------+
- *
- * sf: 0 -> 32 bit, 1 -> 64 bit
- * opc: 00 -> N, 10 -> Z, 11 -> K
- * hw: shift/16 (0,16, and sf only 32, 48)
*/
-static void disas_movw_imm(DisasContext *s, uint32_t insn)
+
+static bool trans_MOVZ(DisasContext *s, arg_movw *a)
{
- int rd = extract32(insn, 0, 5);
- uint64_t imm = extract32(insn, 5, 16);
- int sf = extract32(insn, 31, 1);
- int opc = extract32(insn, 29, 2);
- int pos = extract32(insn, 21, 2) << 4;
- TCGv_i64 tcg_rd = cpu_reg(s, rd);
+ int pos = a->hw << 4;
+ tcg_gen_movi_i64(cpu_reg(s, a->rd), (uint64_t)a->imm << pos);
+ return true;
+}
- if (!sf && (pos >= 32)) {
- unallocated_encoding(s);
- return;
- }
+static bool trans_MOVN(DisasContext *s, arg_movw *a)
+{
+ int pos = a->hw << 4;
+ uint64_t imm = a->imm;
- switch (opc) {
- case 0: /* MOVN */
- case 2: /* MOVZ */
- imm <<= pos;
- if (opc == 0) {
- imm = ~imm;
- }
- if (!sf) {
- imm &= 0xffffffffu;
- }
- tcg_gen_movi_i64(tcg_rd, imm);
- break;
- case 3: /* MOVK */
- tcg_gen_deposit_i64(tcg_rd, tcg_rd, tcg_constant_i64(imm), pos, 16);
- if (!sf) {
- tcg_gen_ext32u_i64(tcg_rd, tcg_rd);
- }
- break;
- default:
- unallocated_encoding(s);
- break;
+ imm = ~(imm << pos);
+ if (!a->sf) {
+ imm = (uint32_t)imm;
}
+ tcg_gen_movi_i64(cpu_reg(s, a->rd), imm);
+ return true;
+}
+
+static bool trans_MOVK(DisasContext *s, arg_movw *a)
+{
+ int pos = a->hw << 4;
+ TCGv_i64 tcg_rd, tcg_im;
+
+ tcg_rd = cpu_reg(s, a->rd);
+ tcg_im = tcg_constant_i64(a->imm);
+ tcg_gen_deposit_i64(tcg_rd, tcg_rd, tcg_im, pos, 16);
+ if (!a->sf) {
+ tcg_gen_ext32u_i64(tcg_rd, tcg_rd);
+ }
+ return true;
}
/* Bitfield
@@ -4585,9 +4573,6 @@ static void disas_extract(DisasContext *s, uint32_t insn)
static void disas_data_proc_imm(DisasContext *s, uint32_t insn)
{
switch (extract32(insn, 23, 6)) {
- case 0x25: /* Move wide (immediate) */
- disas_movw_imm(s, insn);
- break;
case 0x26: /* Bitfield */
disas_bitfield(s, insn);
break;
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 17/29] target/arm: Convert Bitfield to decodetree
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (15 preceding siblings ...)
2023-05-18 12:50 ` [PULL 16/29] target/arm: Convert Move wide " Peter Maydell
@ 2023-05-18 12:50 ` Peter Maydell
2023-05-18 12:50 ` [PULL 18/29] target/arm: Convert Extract instructions " Peter Maydell
` (12 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:50 UTC (permalink / raw)
To: qemu-devel
From: Richard Henderson <richard.henderson@linaro.org>
Convert the BFM, SBFM, UBFM instructions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230512144106.3608981-12-peter.maydell@linaro.org
[PMM: Rebased]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/tcg/a64.decode | 13 +++
target/arm/tcg/translate-a64.c | 144 ++++++++++++++++++---------------
2 files changed, 94 insertions(+), 63 deletions(-)
diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode
index 350b37c8f37..4d5709f9857 100644
--- a/target/arm/tcg/a64.decode
+++ b/target/arm/tcg/a64.decode
@@ -84,3 +84,16 @@ MOVZ . 10 100101 .. ................ ..... @movw_64
MOVZ . 10 100101 .. ................ ..... @movw_32
MOVK . 11 100101 .. ................ ..... @movw_64
MOVK . 11 100101 .. ................ ..... @movw_32
+
+# Bitfield
+
+&bitfield rd rn sf immr imms
+@bitfield_64 1 .. ...... 1 immr:6 imms:6 rn:5 rd:5 &bitfield sf=1
+@bitfield_32 0 .. ...... 0 0 immr:5 0 imms:5 rn:5 rd:5 &bitfield sf=0
+
+SBFM . 00 100110 . ...... ...... ..... ..... @bitfield_64
+SBFM . 00 100110 . ...... ...... ..... ..... @bitfield_32
+BFM . 01 100110 . ...... ...... ..... ..... @bitfield_64
+BFM . 01 100110 . ...... ...... ..... ..... @bitfield_32
+UBFM . 10 100110 . ...... ...... ..... ..... @bitfield_64
+UBFM . 10 100110 . ...... ...... ..... ..... @bitfield_32
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index c9117f0a405..3e7344e79c3 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -4431,82 +4431,103 @@ static bool trans_MOVK(DisasContext *s, arg_movw *a)
return true;
}
-/* Bitfield
- * 31 30 29 28 23 22 21 16 15 10 9 5 4 0
- * +----+-----+-------------+---+------+------+------+------+
- * | sf | opc | 1 0 0 1 1 0 | N | immr | imms | Rn | Rd |
- * +----+-----+-------------+---+------+------+------+------+
+/*
+ * Bitfield
*/
-static void disas_bitfield(DisasContext *s, uint32_t insn)
+
+static bool trans_SBFM(DisasContext *s, arg_SBFM *a)
{
- unsigned int sf, n, opc, ri, si, rn, rd, bitsize, pos, len;
- TCGv_i64 tcg_rd, tcg_tmp;
+ TCGv_i64 tcg_rd = cpu_reg(s, a->rd);
+ TCGv_i64 tcg_tmp = read_cpu_reg(s, a->rn, 1);
+ unsigned int bitsize = a->sf ? 64 : 32;
+ unsigned int ri = a->immr;
+ unsigned int si = a->imms;
+ unsigned int pos, len;
- sf = extract32(insn, 31, 1);
- opc = extract32(insn, 29, 2);
- n = extract32(insn, 22, 1);
- ri = extract32(insn, 16, 6);
- si = extract32(insn, 10, 6);
- rn = extract32(insn, 5, 5);
- rd = extract32(insn, 0, 5);
- bitsize = sf ? 64 : 32;
-
- if (sf != n || ri >= bitsize || si >= bitsize || opc > 2) {
- unallocated_encoding(s);
- return;
- }
-
- tcg_rd = cpu_reg(s, rd);
-
- /* Suppress the zero-extend for !sf. Since RI and SI are constrained
- to be smaller than bitsize, we'll never reference data outside the
- low 32-bits anyway. */
- tcg_tmp = read_cpu_reg(s, rn, 1);
-
- /* Recognize simple(r) extractions. */
if (si >= ri) {
/* Wd<s-r:0> = Wn<s:r> */
len = (si - ri) + 1;
- if (opc == 0) { /* SBFM: ASR, SBFX, SXTB, SXTH, SXTW */
- tcg_gen_sextract_i64(tcg_rd, tcg_tmp, ri, len);
- goto done;
- } else if (opc == 2) { /* UBFM: UBFX, LSR, UXTB, UXTH */
- tcg_gen_extract_i64(tcg_rd, tcg_tmp, ri, len);
- return;
+ tcg_gen_sextract_i64(tcg_rd, tcg_tmp, ri, len);
+ if (!a->sf) {
+ tcg_gen_ext32u_i64(tcg_rd, tcg_rd);
}
- /* opc == 1, BFXIL fall through to deposit */
+ } else {
+ /* Wd<32+s-r,32-r> = Wn<s:0> */
+ len = si + 1;
+ pos = (bitsize - ri) & (bitsize - 1);
+
+ if (len < ri) {
+ /*
+ * Sign extend the destination field from len to fill the
+ * balance of the word. Let the deposit below insert all
+ * of those sign bits.
+ */
+ tcg_gen_sextract_i64(tcg_tmp, tcg_tmp, 0, len);
+ len = ri;
+ }
+
+ /*
+ * We start with zero, and we haven't modified any bits outside
+ * bitsize, therefore no final zero-extension is unneeded for !sf.
+ */
+ tcg_gen_deposit_z_i64(tcg_rd, tcg_tmp, pos, len);
+ }
+ return true;
+}
+
+static bool trans_UBFM(DisasContext *s, arg_UBFM *a)
+{
+ TCGv_i64 tcg_rd = cpu_reg(s, a->rd);
+ TCGv_i64 tcg_tmp = read_cpu_reg(s, a->rn, 1);
+ unsigned int bitsize = a->sf ? 64 : 32;
+ unsigned int ri = a->immr;
+ unsigned int si = a->imms;
+ unsigned int pos, len;
+
+ tcg_rd = cpu_reg(s, a->rd);
+ tcg_tmp = read_cpu_reg(s, a->rn, 1);
+
+ if (si >= ri) {
+ /* Wd<s-r:0> = Wn<s:r> */
+ len = (si - ri) + 1;
+ tcg_gen_extract_i64(tcg_rd, tcg_tmp, ri, len);
+ } else {
+ /* Wd<32+s-r,32-r> = Wn<s:0> */
+ len = si + 1;
+ pos = (bitsize - ri) & (bitsize - 1);
+ tcg_gen_deposit_z_i64(tcg_rd, tcg_tmp, pos, len);
+ }
+ return true;
+}
+
+static bool trans_BFM(DisasContext *s, arg_BFM *a)
+{
+ TCGv_i64 tcg_rd = cpu_reg(s, a->rd);
+ TCGv_i64 tcg_tmp = read_cpu_reg(s, a->rn, 1);
+ unsigned int bitsize = a->sf ? 64 : 32;
+ unsigned int ri = a->immr;
+ unsigned int si = a->imms;
+ unsigned int pos, len;
+
+ tcg_rd = cpu_reg(s, a->rd);
+ tcg_tmp = read_cpu_reg(s, a->rn, 1);
+
+ if (si >= ri) {
+ /* Wd<s-r:0> = Wn<s:r> */
tcg_gen_shri_i64(tcg_tmp, tcg_tmp, ri);
+ len = (si - ri) + 1;
pos = 0;
} else {
- /* Handle the ri > si case with a deposit
- * Wd<32+s-r,32-r> = Wn<s:0>
- */
+ /* Wd<32+s-r,32-r> = Wn<s:0> */
len = si + 1;
pos = (bitsize - ri) & (bitsize - 1);
}
- if (opc == 0 && len < ri) {
- /* SBFM: sign extend the destination field from len to fill
- the balance of the word. Let the deposit below insert all
- of those sign bits. */
- tcg_gen_sextract_i64(tcg_tmp, tcg_tmp, 0, len);
- len = ri;
- }
-
- if (opc == 1) { /* BFM, BFXIL */
- tcg_gen_deposit_i64(tcg_rd, tcg_rd, tcg_tmp, pos, len);
- } else {
- /* SBFM or UBFM: We start with zero, and we haven't modified
- any bits outside bitsize, therefore the zero-extension
- below is unneeded. */
- tcg_gen_deposit_z_i64(tcg_rd, tcg_tmp, pos, len);
- return;
- }
-
- done:
- if (!sf) { /* zero extend final result */
+ tcg_gen_deposit_i64(tcg_rd, tcg_rd, tcg_tmp, pos, len);
+ if (!a->sf) {
tcg_gen_ext32u_i64(tcg_rd, tcg_rd);
}
+ return true;
}
/* Extract
@@ -4573,9 +4594,6 @@ static void disas_extract(DisasContext *s, uint32_t insn)
static void disas_data_proc_imm(DisasContext *s, uint32_t insn)
{
switch (extract32(insn, 23, 6)) {
- case 0x26: /* Bitfield */
- disas_bitfield(s, insn);
- break;
case 0x27: /* Extract */
disas_extract(s, insn);
break;
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 18/29] target/arm: Convert Extract instructions to decodetree
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (16 preceding siblings ...)
2023-05-18 12:50 ` [PULL 17/29] target/arm: Convert Bitfield " Peter Maydell
@ 2023-05-18 12:50 ` Peter Maydell
2023-05-18 12:50 ` [PULL 19/29] target/arm: Convert unconditional branch immediate " Peter Maydell
` (11 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:50 UTC (permalink / raw)
To: qemu-devel
Convert the EXTR instruction to decodetree (this is the
only one in the 'Extract" class). This is the last of
the dp-immediate insns in the legacy decoder, so we
can now remove disas_data_proc_imm().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-13-peter.maydell@linaro.org
---
target/arm/tcg/a64.decode | 7 +++
target/arm/tcg/translate-a64.c | 94 +++++++++++-----------------------
2 files changed, 36 insertions(+), 65 deletions(-)
diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode
index 4d5709f9857..e6e1a5f2bcb 100644
--- a/target/arm/tcg/a64.decode
+++ b/target/arm/tcg/a64.decode
@@ -97,3 +97,10 @@ BFM . 01 100110 . ...... ...... ..... ..... @bitfield_64
BFM . 01 100110 . ...... ...... ..... ..... @bitfield_32
UBFM . 10 100110 . ...... ...... ..... ..... @bitfield_64
UBFM . 10 100110 . ...... ...... ..... ..... @bitfield_32
+
+# Extract
+
+&extract rd rn rm imm sf
+
+EXTR 1 00 100111 1 0 rm:5 imm:6 rn:5 rd:5 &extract sf=1
+EXTR 0 00 100111 0 0 rm:5 0 imm:5 rn:5 rd:5 &extract sf=0
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index 3e7344e79c3..f939f6c9443 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -4530,77 +4530,44 @@ static bool trans_BFM(DisasContext *s, arg_BFM *a)
return true;
}
-/* Extract
- * 31 30 29 28 23 22 21 20 16 15 10 9 5 4 0
- * +----+------+-------------+---+----+------+--------+------+------+
- * | sf | op21 | 1 0 0 1 1 1 | N | o0 | Rm | imms | Rn | Rd |
- * +----+------+-------------+---+----+------+--------+------+------+
- */
-static void disas_extract(DisasContext *s, uint32_t insn)
+static bool trans_EXTR(DisasContext *s, arg_extract *a)
{
- unsigned int sf, n, rm, imm, rn, rd, bitsize, op21, op0;
+ TCGv_i64 tcg_rd, tcg_rm, tcg_rn;
- sf = extract32(insn, 31, 1);
- n = extract32(insn, 22, 1);
- rm = extract32(insn, 16, 5);
- imm = extract32(insn, 10, 6);
- rn = extract32(insn, 5, 5);
- rd = extract32(insn, 0, 5);
- op21 = extract32(insn, 29, 2);
- op0 = extract32(insn, 21, 1);
- bitsize = sf ? 64 : 32;
+ tcg_rd = cpu_reg(s, a->rd);
- if (sf != n || op21 || op0 || imm >= bitsize) {
- unallocated_encoding(s);
- } else {
- TCGv_i64 tcg_rd, tcg_rm, tcg_rn;
-
- tcg_rd = cpu_reg(s, rd);
-
- if (unlikely(imm == 0)) {
- /* tcg shl_i32/shl_i64 is undefined for 32/64 bit shifts,
- * so an extract from bit 0 is a special case.
- */
- if (sf) {
- tcg_gen_mov_i64(tcg_rd, cpu_reg(s, rm));
- } else {
- tcg_gen_ext32u_i64(tcg_rd, cpu_reg(s, rm));
- }
+ if (unlikely(a->imm == 0)) {
+ /*
+ * tcg shl_i32/shl_i64 is undefined for 32/64 bit shifts,
+ * so an extract from bit 0 is a special case.
+ */
+ if (a->sf) {
+ tcg_gen_mov_i64(tcg_rd, cpu_reg(s, a->rm));
} else {
- tcg_rm = cpu_reg(s, rm);
- tcg_rn = cpu_reg(s, rn);
+ tcg_gen_ext32u_i64(tcg_rd, cpu_reg(s, a->rm));
+ }
+ } else {
+ tcg_rm = cpu_reg(s, a->rm);
+ tcg_rn = cpu_reg(s, a->rn);
- if (sf) {
- /* Specialization to ROR happens in EXTRACT2. */
- tcg_gen_extract2_i64(tcg_rd, tcg_rm, tcg_rn, imm);
+ if (a->sf) {
+ /* Specialization to ROR happens in EXTRACT2. */
+ tcg_gen_extract2_i64(tcg_rd, tcg_rm, tcg_rn, a->imm);
+ } else {
+ TCGv_i32 t0 = tcg_temp_new_i32();
+
+ tcg_gen_extrl_i64_i32(t0, tcg_rm);
+ if (a->rm == a->rn) {
+ tcg_gen_rotri_i32(t0, t0, a->imm);
} else {
- TCGv_i32 t0 = tcg_temp_new_i32();
-
- tcg_gen_extrl_i64_i32(t0, tcg_rm);
- if (rm == rn) {
- tcg_gen_rotri_i32(t0, t0, imm);
- } else {
- TCGv_i32 t1 = tcg_temp_new_i32();
- tcg_gen_extrl_i64_i32(t1, tcg_rn);
- tcg_gen_extract2_i32(t0, t0, t1, imm);
- }
- tcg_gen_extu_i32_i64(tcg_rd, t0);
+ TCGv_i32 t1 = tcg_temp_new_i32();
+ tcg_gen_extrl_i64_i32(t1, tcg_rn);
+ tcg_gen_extract2_i32(t0, t0, t1, a->imm);
}
+ tcg_gen_extu_i32_i64(tcg_rd, t0);
}
}
-}
-
-/* Data processing - immediate */
-static void disas_data_proc_imm(DisasContext *s, uint32_t insn)
-{
- switch (extract32(insn, 23, 6)) {
- case 0x27: /* Extract */
- disas_extract(s, insn);
- break;
- default:
- unallocated_encoding(s);
- break;
- }
+ return true;
}
/* Shift a TCGv src by TCGv shift_amount, put result in dst.
@@ -14125,9 +14092,6 @@ static bool btype_destination_ok(uint32_t insn, bool bt, int btype)
static void disas_a64_legacy(DisasContext *s, uint32_t insn)
{
switch (extract32(insn, 25, 4)) {
- case 0x8: case 0x9: /* Data processing - immediate */
- disas_data_proc_imm(s, insn);
- break;
case 0xa: case 0xb: /* Branch, exception generation and system insns */
disas_b_exc_sys(s, insn);
break;
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 19/29] target/arm: Convert unconditional branch immediate to decodetree
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (17 preceding siblings ...)
2023-05-18 12:50 ` [PULL 18/29] target/arm: Convert Extract instructions " Peter Maydell
@ 2023-05-18 12:50 ` Peter Maydell
2023-05-18 12:50 ` [PULL 20/29] target/arm: Convert CBZ, CBNZ " Peter Maydell
` (10 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:50 UTC (permalink / raw)
To: qemu-devel
Convert the unconditional branch immediate insns B and BL to
decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-14-peter.maydell@linaro.org
---
target/arm/tcg/a64.decode | 9 +++++++++
target/arm/tcg/translate-a64.c | 31 +++++++++++--------------------
2 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode
index e6e1a5f2bcb..483e3649929 100644
--- a/target/arm/tcg/a64.decode
+++ b/target/arm/tcg/a64.decode
@@ -21,6 +21,7 @@
&ri rd imm
&rri_sf rd rn imm sf
+&i imm
### Data Processing - Immediate
@@ -104,3 +105,11 @@ UBFM . 10 100110 . ...... ...... ..... ..... @bitfield_32
EXTR 1 00 100111 1 0 rm:5 imm:6 rn:5 rd:5 &extract sf=1
EXTR 0 00 100111 0 0 rm:5 0 imm:5 rn:5 rd:5 &extract sf=0
+
+# Branches
+
+%imm26 0:s26 !function=times_4
+@branch . ..... .......................... &i imm=%imm26
+
+B 0 00101 .......................... @branch
+BL 1 00101 .......................... @branch
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index f939f6c9443..f702e9b0678 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -1319,24 +1319,19 @@ static inline AArch64DecodeFn *lookup_disas_fn(const AArch64DecodeTable *table,
* match up with those in the manual.
*/
-/* Unconditional branch (immediate)
- * 31 30 26 25 0
- * +----+-----------+-------------------------------------+
- * | op | 0 0 1 0 1 | imm26 |
- * +----+-----------+-------------------------------------+
- */
-static void disas_uncond_b_imm(DisasContext *s, uint32_t insn)
+static bool trans_B(DisasContext *s, arg_i *a)
{
- int64_t diff = sextract32(insn, 0, 26) * 4;
-
- if (insn & (1U << 31)) {
- /* BL Branch with link */
- gen_pc_plus_diff(s, cpu_reg(s, 30), curr_insn_len(s));
- }
-
- /* B Branch / BL Branch with link */
reset_btype(s);
- gen_goto_tb(s, 0, diff);
+ gen_goto_tb(s, 0, a->imm);
+ return true;
+}
+
+static bool trans_BL(DisasContext *s, arg_i *a)
+{
+ gen_pc_plus_diff(s, cpu_reg(s, 30), curr_insn_len(s));
+ reset_btype(s);
+ gen_goto_tb(s, 0, a->imm);
+ return true;
}
/* Compare and branch (immediate)
@@ -2413,10 +2408,6 @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn)
static void disas_b_exc_sys(DisasContext *s, uint32_t insn)
{
switch (extract32(insn, 25, 7)) {
- case 0x0a: case 0x0b:
- case 0x4a: case 0x4b: /* Unconditional branch (immediate) */
- disas_uncond_b_imm(s, insn);
- break;
case 0x1a: case 0x5a: /* Compare & branch (immediate) */
disas_comp_b_imm(s, insn);
break;
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 20/29] target/arm: Convert CBZ, CBNZ to decodetree
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (18 preceding siblings ...)
2023-05-18 12:50 ` [PULL 19/29] target/arm: Convert unconditional branch immediate " Peter Maydell
@ 2023-05-18 12:50 ` Peter Maydell
2023-05-18 12:50 ` [PULL 21/29] target/arm: Convert TBZ, TBNZ " Peter Maydell
` (9 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:50 UTC (permalink / raw)
To: qemu-devel
Convert the compare-and-branch-immediate insns CBZ and CBNZ
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-15-peter.maydell@linaro.org
---
target/arm/tcg/a64.decode | 5 +++++
target/arm/tcg/translate-a64.c | 26 ++++++--------------------
2 files changed, 11 insertions(+), 20 deletions(-)
diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode
index 483e3649929..f5759a66e7f 100644
--- a/target/arm/tcg/a64.decode
+++ b/target/arm/tcg/a64.decode
@@ -113,3 +113,8 @@ EXTR 0 00 100111 0 0 rm:5 0 imm:5 rn:5 rd:5 &extract sf=0
B 0 00101 .......................... @branch
BL 1 00101 .......................... @branch
+
+%imm19 5:s19 !function=times_4
+&cbz rt imm sf nz
+
+CBZ sf:1 011010 nz:1 ................... rt:5 &cbz imm=%imm19
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index f702e9b0678..06619f8a05d 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -1334,33 +1334,22 @@ static bool trans_BL(DisasContext *s, arg_i *a)
return true;
}
-/* Compare and branch (immediate)
- * 31 30 25 24 23 5 4 0
- * +----+-------------+----+---------------------+--------+
- * | sf | 0 1 1 0 1 0 | op | imm19 | Rt |
- * +----+-------------+----+---------------------+--------+
- */
-static void disas_comp_b_imm(DisasContext *s, uint32_t insn)
+
+static bool trans_CBZ(DisasContext *s, arg_cbz *a)
{
- unsigned int sf, op, rt;
- int64_t diff;
DisasLabel match;
TCGv_i64 tcg_cmp;
- sf = extract32(insn, 31, 1);
- op = extract32(insn, 24, 1); /* 0: CBZ; 1: CBNZ */
- rt = extract32(insn, 0, 5);
- diff = sextract32(insn, 5, 19) * 4;
-
- tcg_cmp = read_cpu_reg(s, rt, sf);
+ tcg_cmp = read_cpu_reg(s, a->rt, a->sf);
reset_btype(s);
match = gen_disas_label(s);
- tcg_gen_brcondi_i64(op ? TCG_COND_NE : TCG_COND_EQ,
+ tcg_gen_brcondi_i64(a->nz ? TCG_COND_NE : TCG_COND_EQ,
tcg_cmp, 0, match.label);
gen_goto_tb(s, 0, 4);
set_disas_label(s, match);
- gen_goto_tb(s, 1, diff);
+ gen_goto_tb(s, 1, a->imm);
+ return true;
}
/* Test and branch (immediate)
@@ -2408,9 +2397,6 @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn)
static void disas_b_exc_sys(DisasContext *s, uint32_t insn)
{
switch (extract32(insn, 25, 7)) {
- case 0x1a: case 0x5a: /* Compare & branch (immediate) */
- disas_comp_b_imm(s, insn);
- break;
case 0x1b: case 0x5b: /* Test & branch (immediate) */
disas_test_b_imm(s, insn);
break;
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 21/29] target/arm: Convert TBZ, TBNZ to decodetree
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (19 preceding siblings ...)
2023-05-18 12:50 ` [PULL 20/29] target/arm: Convert CBZ, CBNZ " Peter Maydell
@ 2023-05-18 12:50 ` Peter Maydell
2023-05-18 12:51 ` [PULL 22/29] target/arm: Convert conditional branch insns " Peter Maydell
` (8 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:50 UTC (permalink / raw)
To: qemu-devel
Convert the test-and-branch-immediate insns TBZ and TBNZ
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-16-peter.maydell@linaro.org
---
target/arm/tcg/a64.decode | 6 ++++++
target/arm/tcg/translate-a64.c | 25 +++++--------------------
2 files changed, 11 insertions(+), 20 deletions(-)
diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode
index f5759a66e7f..09def15863f 100644
--- a/target/arm/tcg/a64.decode
+++ b/target/arm/tcg/a64.decode
@@ -118,3 +118,9 @@ BL 1 00101 .......................... @branch
&cbz rt imm sf nz
CBZ sf:1 011010 nz:1 ................... rt:5 &cbz imm=%imm19
+
+%imm14 5:s14 !function=times_4
+%imm31_19 31:1 19:5
+&tbz rt imm nz bitpos
+
+TBZ . 011011 nz:1 ..... .............. rt:5 &tbz imm=%imm14 bitpos=%imm31_19
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index 06619f8a05d..1e5977423a6 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -1352,35 +1352,23 @@ static bool trans_CBZ(DisasContext *s, arg_cbz *a)
return true;
}
-/* Test and branch (immediate)
- * 31 30 25 24 23 19 18 5 4 0
- * +----+-------------+----+-------+-------------+------+
- * | b5 | 0 1 1 0 1 1 | op | b40 | imm14 | Rt |
- * +----+-------------+----+-------+-------------+------+
- */
-static void disas_test_b_imm(DisasContext *s, uint32_t insn)
+static bool trans_TBZ(DisasContext *s, arg_tbz *a)
{
- unsigned int bit_pos, op, rt;
- int64_t diff;
DisasLabel match;
TCGv_i64 tcg_cmp;
- bit_pos = (extract32(insn, 31, 1) << 5) | extract32(insn, 19, 5);
- op = extract32(insn, 24, 1); /* 0: TBZ; 1: TBNZ */
- diff = sextract32(insn, 5, 14) * 4;
- rt = extract32(insn, 0, 5);
-
tcg_cmp = tcg_temp_new_i64();
- tcg_gen_andi_i64(tcg_cmp, cpu_reg(s, rt), (1ULL << bit_pos));
+ tcg_gen_andi_i64(tcg_cmp, cpu_reg(s, a->rt), 1ULL << a->bitpos);
reset_btype(s);
match = gen_disas_label(s);
- tcg_gen_brcondi_i64(op ? TCG_COND_NE : TCG_COND_EQ,
+ tcg_gen_brcondi_i64(a->nz ? TCG_COND_NE : TCG_COND_EQ,
tcg_cmp, 0, match.label);
gen_goto_tb(s, 0, 4);
set_disas_label(s, match);
- gen_goto_tb(s, 1, diff);
+ gen_goto_tb(s, 1, a->imm);
+ return true;
}
/* Conditional branch (immediate)
@@ -2397,9 +2385,6 @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn)
static void disas_b_exc_sys(DisasContext *s, uint32_t insn)
{
switch (extract32(insn, 25, 7)) {
- case 0x1b: case 0x5b: /* Test & branch (immediate) */
- disas_test_b_imm(s, insn);
- break;
case 0x2a: /* Conditional branch (immediate) */
disas_cond_b_imm(s, insn);
break;
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 22/29] target/arm: Convert conditional branch insns to decodetree
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (20 preceding siblings ...)
2023-05-18 12:50 ` [PULL 21/29] target/arm: Convert TBZ, TBNZ " Peter Maydell
@ 2023-05-18 12:51 ` Peter Maydell
2023-05-18 12:51 ` [PULL 23/29] target/arm: Convert BR, BLR, RET " Peter Maydell
` (7 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:51 UTC (permalink / raw)
To: qemu-devel
Convert the immediate conditional branch insn B.cond to
decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-17-peter.maydell@linaro.org
---
target/arm/tcg/a64.decode | 2 ++
target/arm/tcg/translate-a64.c | 30 ++++++------------------------
2 files changed, 8 insertions(+), 24 deletions(-)
diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode
index 09def15863f..5b9e275b5f8 100644
--- a/target/arm/tcg/a64.decode
+++ b/target/arm/tcg/a64.decode
@@ -124,3 +124,5 @@ CBZ sf:1 011010 nz:1 ................... rt:5 &cbz imm=%imm19
&tbz rt imm nz bitpos
TBZ . 011011 nz:1 ..... .............. rt:5 &tbz imm=%imm14 bitpos=%imm31_19
+
+B_cond 0101010 0 ................... 0 cond:4 imm=%imm19
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index 1e5977423a6..a7ab89fdc8c 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -1371,36 +1371,21 @@ static bool trans_TBZ(DisasContext *s, arg_tbz *a)
return true;
}
-/* Conditional branch (immediate)
- * 31 25 24 23 5 4 3 0
- * +---------------+----+---------------------+----+------+
- * | 0 1 0 1 0 1 0 | o1 | imm19 | o0 | cond |
- * +---------------+----+---------------------+----+------+
- */
-static void disas_cond_b_imm(DisasContext *s, uint32_t insn)
+static bool trans_B_cond(DisasContext *s, arg_B_cond *a)
{
- unsigned int cond;
- int64_t diff;
-
- if ((insn & (1 << 4)) || (insn & (1 << 24))) {
- unallocated_encoding(s);
- return;
- }
- diff = sextract32(insn, 5, 19) * 4;
- cond = extract32(insn, 0, 4);
-
reset_btype(s);
- if (cond < 0x0e) {
+ if (a->cond < 0x0e) {
/* genuinely conditional branches */
DisasLabel match = gen_disas_label(s);
- arm_gen_test_cc(cond, match.label);
+ arm_gen_test_cc(a->cond, match.label);
gen_goto_tb(s, 0, 4);
set_disas_label(s, match);
- gen_goto_tb(s, 1, diff);
+ gen_goto_tb(s, 1, a->imm);
} else {
/* 0xe and 0xf are both "always" conditions */
- gen_goto_tb(s, 0, diff);
+ gen_goto_tb(s, 0, a->imm);
}
+ return true;
}
/* HINT instruction group, including various allocated HINTs */
@@ -2385,9 +2370,6 @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn)
static void disas_b_exc_sys(DisasContext *s, uint32_t insn)
{
switch (extract32(insn, 25, 7)) {
- case 0x2a: /* Conditional branch (immediate) */
- disas_cond_b_imm(s, insn);
- break;
case 0x6a: /* Exception generation / System */
if (insn & (1 << 24)) {
if (extract32(insn, 22, 2) == 0) {
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 23/29] target/arm: Convert BR, BLR, RET to decodetree
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (21 preceding siblings ...)
2023-05-18 12:51 ` [PULL 22/29] target/arm: Convert conditional branch insns " Peter Maydell
@ 2023-05-18 12:51 ` Peter Maydell
2023-05-18 12:51 ` [PULL 24/29] target/arm: Convert BRA[AB]Z, BLR[AB]Z, RETA[AB] " Peter Maydell
` (6 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:51 UTC (permalink / raw)
To: qemu-devel
Convert the simple (non-pointer-auth) BR, BLR and RET insns
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-18-peter.maydell@linaro.org
---
target/arm/tcg/a64.decode | 5 ++++
target/arm/tcg/translate-a64.c | 55 ++++++++++++++++++++++++++++++----
2 files changed, 54 insertions(+), 6 deletions(-)
diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode
index 5b9e275b5f8..690dc107d41 100644
--- a/target/arm/tcg/a64.decode
+++ b/target/arm/tcg/a64.decode
@@ -19,6 +19,7 @@
# This file is processed by scripts/decodetree.py
#
+&r rn
&ri rd imm
&rri_sf rd rn imm sf
&i imm
@@ -126,3 +127,7 @@ CBZ sf:1 011010 nz:1 ................... rt:5 &cbz imm=%imm19
TBZ . 011011 nz:1 ..... .............. rt:5 &tbz imm=%imm14 bitpos=%imm31_19
B_cond 0101010 0 ................... 0 cond:4 imm=%imm19
+
+BR 1101011 0000 11111 000000 rn:5 00000 &r
+BLR 1101011 0001 11111 000000 rn:5 00000 &r
+RET 1101011 0010 11111 000000 rn:5 00000 &r
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index a7ab89fdc8c..3af16e60b50 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -1388,6 +1388,53 @@ static bool trans_B_cond(DisasContext *s, arg_B_cond *a)
return true;
}
+static void set_btype_for_br(DisasContext *s, int rn)
+{
+ if (dc_isar_feature(aa64_bti, s)) {
+ /* BR to {x16,x17} or !guard -> 1, else 3. */
+ set_btype(s, rn == 16 || rn == 17 || !s->guarded_page ? 1 : 3);
+ }
+}
+
+static void set_btype_for_blr(DisasContext *s)
+{
+ if (dc_isar_feature(aa64_bti, s)) {
+ /* BLR sets BTYPE to 2, regardless of source guarded page. */
+ set_btype(s, 2);
+ }
+}
+
+static bool trans_BR(DisasContext *s, arg_r *a)
+{
+ gen_a64_set_pc(s, cpu_reg(s, a->rn));
+ set_btype_for_br(s, a->rn);
+ s->base.is_jmp = DISAS_JUMP;
+ return true;
+}
+
+static bool trans_BLR(DisasContext *s, arg_r *a)
+{
+ TCGv_i64 dst = cpu_reg(s, a->rn);
+ TCGv_i64 lr = cpu_reg(s, 30);
+ if (dst == lr) {
+ TCGv_i64 tmp = tcg_temp_new_i64();
+ tcg_gen_mov_i64(tmp, dst);
+ dst = tmp;
+ }
+ gen_pc_plus_diff(s, lr, curr_insn_len(s));
+ gen_a64_set_pc(s, dst);
+ set_btype_for_blr(s);
+ s->base.is_jmp = DISAS_JUMP;
+ return true;
+}
+
+static bool trans_RET(DisasContext *s, arg_r *a)
+{
+ gen_a64_set_pc(s, cpu_reg(s, a->rn));
+ s->base.is_jmp = DISAS_JUMP;
+ return true;
+}
+
/* HINT instruction group, including various allocated HINTs */
static void handle_hint(DisasContext *s, uint32_t insn,
unsigned int op1, unsigned int op2, unsigned int crm)
@@ -2186,12 +2233,8 @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn)
btype_mod = opc;
switch (op3) {
case 0:
- /* BR, BLR, RET */
- if (op4 != 0) {
- goto do_unallocated;
- }
- dst = cpu_reg(s, rn);
- break;
+ /* BR, BLR, RET : handled in decodetree */
+ goto do_unallocated;
case 2:
case 3:
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 24/29] target/arm: Convert BRA[AB]Z, BLR[AB]Z, RETA[AB] to decodetree
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (22 preceding siblings ...)
2023-05-18 12:51 ` [PULL 23/29] target/arm: Convert BR, BLR, RET " Peter Maydell
@ 2023-05-18 12:51 ` Peter Maydell
2023-05-18 12:51 ` [PULL 25/29] target/arm: Convert BRAA, BRAB, BLRAA, BLRAB " Peter Maydell
` (5 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:51 UTC (permalink / raw)
To: qemu-devel
Convert the single-register pointer-authentication variants of BR,
BLR, RET to decodetree. (BRAA/BLRAA are in a different branch of
the legacy decoder and will be dealt with in the next commit.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-19-peter.maydell@linaro.org
---
target/arm/tcg/a64.decode | 7 ++
target/arm/tcg/translate-a64.c | 132 +++++++++++++++++++--------------
2 files changed, 84 insertions(+), 55 deletions(-)
diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode
index 690dc107d41..f66202081ae 100644
--- a/target/arm/tcg/a64.decode
+++ b/target/arm/tcg/a64.decode
@@ -131,3 +131,10 @@ B_cond 0101010 0 ................... 0 cond:4 imm=%imm19
BR 1101011 0000 11111 000000 rn:5 00000 &r
BLR 1101011 0001 11111 000000 rn:5 00000 &r
RET 1101011 0010 11111 000000 rn:5 00000 &r
+
+&braz rn m
+BRAZ 1101011 0000 11111 00001 m:1 rn:5 11111 &braz # BRAAZ, BRABZ
+BLRAZ 1101011 0001 11111 00001 m:1 rn:5 11111 &braz # BLRAAZ, BLRABZ
+
+&reta m
+RETA 1101011 0010 11111 00001 m:1 11111 11111 &reta # RETAA, RETAB
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index 3af16e60b50..a278136cd10 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -1435,6 +1435,75 @@ static bool trans_RET(DisasContext *s, arg_r *a)
return true;
}
+static TCGv_i64 auth_branch_target(DisasContext *s, TCGv_i64 dst,
+ TCGv_i64 modifier, bool use_key_a)
+{
+ TCGv_i64 truedst;
+ /*
+ * Return the branch target for a BRAA/RETA/etc, which is either
+ * just the destination dst, or that value with the pauth check
+ * done and the code removed from the high bits.
+ */
+ if (!s->pauth_active) {
+ return dst;
+ }
+
+ truedst = tcg_temp_new_i64();
+ if (use_key_a) {
+ gen_helper_autia(truedst, cpu_env, dst, modifier);
+ } else {
+ gen_helper_autib(truedst, cpu_env, dst, modifier);
+ }
+ return truedst;
+}
+
+static bool trans_BRAZ(DisasContext *s, arg_braz *a)
+{
+ TCGv_i64 dst;
+
+ if (!dc_isar_feature(aa64_pauth, s)) {
+ return false;
+ }
+
+ dst = auth_branch_target(s, cpu_reg(s, a->rn), tcg_constant_i64(0), !a->m);
+ gen_a64_set_pc(s, dst);
+ set_btype_for_br(s, a->rn);
+ s->base.is_jmp = DISAS_JUMP;
+ return true;
+}
+
+static bool trans_BLRAZ(DisasContext *s, arg_braz *a)
+{
+ TCGv_i64 dst, lr;
+
+ if (!dc_isar_feature(aa64_pauth, s)) {
+ return false;
+ }
+
+ dst = auth_branch_target(s, cpu_reg(s, a->rn), tcg_constant_i64(0), !a->m);
+ lr = cpu_reg(s, 30);
+ if (dst == lr) {
+ TCGv_i64 tmp = tcg_temp_new_i64();
+ tcg_gen_mov_i64(tmp, dst);
+ dst = tmp;
+ }
+ gen_pc_plus_diff(s, lr, curr_insn_len(s));
+ gen_a64_set_pc(s, dst);
+ set_btype_for_blr(s);
+ s->base.is_jmp = DISAS_JUMP;
+ return true;
+}
+
+static bool trans_RETA(DisasContext *s, arg_reta *a)
+{
+ TCGv_i64 dst;
+
+ dst = auth_branch_target(s, cpu_reg(s, 30), cpu_X[31], !a->m);
+ gen_a64_set_pc(s, dst);
+ s->base.is_jmp = DISAS_JUMP;
+ return true;
+}
+
/* HINT instruction group, including various allocated HINTs */
static void handle_hint(DisasContext *s, uint32_t insn,
unsigned int op1, unsigned int op2, unsigned int crm)
@@ -2227,61 +2296,14 @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn)
}
switch (opc) {
- case 0: /* BR */
- case 1: /* BLR */
- case 2: /* RET */
- btype_mod = opc;
- switch (op3) {
- case 0:
- /* BR, BLR, RET : handled in decodetree */
- goto do_unallocated;
-
- case 2:
- case 3:
- if (!dc_isar_feature(aa64_pauth, s)) {
- goto do_unallocated;
- }
- if (opc == 2) {
- /* RETAA, RETAB */
- if (rn != 0x1f || op4 != 0x1f) {
- goto do_unallocated;
- }
- rn = 30;
- modifier = cpu_X[31];
- } else {
- /* BRAAZ, BRABZ, BLRAAZ, BLRABZ */
- if (op4 != 0x1f) {
- goto do_unallocated;
- }
- modifier = tcg_constant_i64(0);
- }
- if (s->pauth_active) {
- dst = tcg_temp_new_i64();
- if (op3 == 2) {
- gen_helper_autia(dst, cpu_env, cpu_reg(s, rn), modifier);
- } else {
- gen_helper_autib(dst, cpu_env, cpu_reg(s, rn), modifier);
- }
- } else {
- dst = cpu_reg(s, rn);
- }
- break;
-
- default:
- goto do_unallocated;
- }
- /* BLR also needs to load return address */
- if (opc == 1) {
- TCGv_i64 lr = cpu_reg(s, 30);
- if (dst == lr) {
- TCGv_i64 tmp = tcg_temp_new_i64();
- tcg_gen_mov_i64(tmp, dst);
- dst = tmp;
- }
- gen_pc_plus_diff(s, lr, curr_insn_len(s));
- }
- gen_a64_set_pc(s, dst);
- break;
+ case 0:
+ case 1:
+ case 2:
+ /*
+ * BR, BLR, RET, RETAA, RETAB, BRAAZ, BRABZ, BLRAAZ, BLRABZ:
+ * handled in decodetree
+ */
+ goto do_unallocated;
case 8: /* BRAA */
case 9: /* BLRAA */
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 25/29] target/arm: Convert BRAA, BRAB, BLRAA, BLRAB to decodetree
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (23 preceding siblings ...)
2023-05-18 12:51 ` [PULL 24/29] target/arm: Convert BRA[AB]Z, BLR[AB]Z, RETA[AB] " Peter Maydell
@ 2023-05-18 12:51 ` Peter Maydell
2023-05-18 12:51 ` [PULL 26/29] target/arm: Convert ERET, ERETAA, ERETAB " Peter Maydell
` (4 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:51 UTC (permalink / raw)
To: qemu-devel
Convert the last four BR-with-pointer-auth insns to decodetree.
The remaining cases in the outer switch in disas_uncond_b_reg()
all return early rather than leaving the case statement, so we
can delete the now-unused code at the end of that function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-20-peter.maydell@linaro.org
---
target/arm/tcg/a64.decode | 4 ++
target/arm/tcg/translate-a64.c | 97 ++++++++++++++--------------------
2 files changed, 43 insertions(+), 58 deletions(-)
diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode
index f66202081ae..2fd435b6317 100644
--- a/target/arm/tcg/a64.decode
+++ b/target/arm/tcg/a64.decode
@@ -138,3 +138,7 @@ BLRAZ 1101011 0001 11111 00001 m:1 rn:5 11111 &braz # BLRAAZ, BLRABZ
&reta m
RETA 1101011 0010 11111 00001 m:1 11111 11111 &reta # RETAA, RETAB
+
+&bra rn rm m
+BRA 1101011 1000 11111 00001 m:1 rn:5 rm:5 &bra # BRAA, BRAB
+BLRA 1101011 1001 11111 00001 m:1 rn:5 rm:5 &bra # BLRAA, BLRAB
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index a278136cd10..40a6e59a609 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -1504,6 +1504,41 @@ static bool trans_RETA(DisasContext *s, arg_reta *a)
return true;
}
+static bool trans_BRA(DisasContext *s, arg_bra *a)
+{
+ TCGv_i64 dst;
+
+ if (!dc_isar_feature(aa64_pauth, s)) {
+ return false;
+ }
+ dst = auth_branch_target(s, cpu_reg(s,a->rn), cpu_reg_sp(s, a->rm), !a->m);
+ gen_a64_set_pc(s, dst);
+ set_btype_for_br(s, a->rn);
+ s->base.is_jmp = DISAS_JUMP;
+ return true;
+}
+
+static bool trans_BLRA(DisasContext *s, arg_bra *a)
+{
+ TCGv_i64 dst, lr;
+
+ if (!dc_isar_feature(aa64_pauth, s)) {
+ return false;
+ }
+ dst = auth_branch_target(s, cpu_reg(s, a->rn), cpu_reg_sp(s, a->rm), !a->m);
+ lr = cpu_reg(s, 30);
+ if (dst == lr) {
+ TCGv_i64 tmp = tcg_temp_new_i64();
+ tcg_gen_mov_i64(tmp, dst);
+ dst = tmp;
+ }
+ gen_pc_plus_diff(s, lr, curr_insn_len(s));
+ gen_a64_set_pc(s, dst);
+ set_btype_for_blr(s);
+ s->base.is_jmp = DISAS_JUMP;
+ return true;
+}
+
/* HINT instruction group, including various allocated HINTs */
static void handle_hint(DisasContext *s, uint32_t insn,
unsigned int op1, unsigned int op2, unsigned int crm)
@@ -2281,7 +2316,6 @@ static void disas_exc(DisasContext *s, uint32_t insn)
static void disas_uncond_b_reg(DisasContext *s, uint32_t insn)
{
unsigned int opc, op2, op3, rn, op4;
- unsigned btype_mod = 2; /* 0: BR, 1: BLR, 2: other */
TCGv_i64 dst;
TCGv_i64 modifier;
@@ -2299,45 +2333,14 @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn)
case 0:
case 1:
case 2:
+ case 8:
+ case 9:
/*
- * BR, BLR, RET, RETAA, RETAB, BRAAZ, BRABZ, BLRAAZ, BLRABZ:
- * handled in decodetree
+ * BR, BLR, RET, RETAA, RETAB, BRAAZ, BRABZ, BLRAAZ, BLRABZ,
+ * BRAA, BLRAA: handled in decodetree
*/
goto do_unallocated;
- case 8: /* BRAA */
- case 9: /* BLRAA */
- if (!dc_isar_feature(aa64_pauth, s)) {
- goto do_unallocated;
- }
- if ((op3 & ~1) != 2) {
- goto do_unallocated;
- }
- btype_mod = opc & 1;
- if (s->pauth_active) {
- dst = tcg_temp_new_i64();
- modifier = cpu_reg_sp(s, op4);
- if (op3 == 2) {
- gen_helper_autia(dst, cpu_env, cpu_reg(s, rn), modifier);
- } else {
- gen_helper_autib(dst, cpu_env, cpu_reg(s, rn), modifier);
- }
- } else {
- dst = cpu_reg(s, rn);
- }
- /* BLRAA also needs to load return address */
- if (opc == 9) {
- TCGv_i64 lr = cpu_reg(s, 30);
- if (dst == lr) {
- TCGv_i64 tmp = tcg_temp_new_i64();
- tcg_gen_mov_i64(tmp, dst);
- dst = tmp;
- }
- gen_pc_plus_diff(s, lr, curr_insn_len(s));
- }
- gen_a64_set_pc(s, dst);
- break;
-
case 4: /* ERET */
if (s->current_el == 0) {
goto do_unallocated;
@@ -2407,28 +2410,6 @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn)
unallocated_encoding(s);
return;
}
-
- switch (btype_mod) {
- case 0: /* BR */
- if (dc_isar_feature(aa64_bti, s)) {
- /* BR to {x16,x17} or !guard -> 1, else 3. */
- set_btype(s, rn == 16 || rn == 17 || !s->guarded_page ? 1 : 3);
- }
- break;
-
- case 1: /* BLR */
- if (dc_isar_feature(aa64_bti, s)) {
- /* BLR sets BTYPE to 2, regardless of source guarded page. */
- set_btype(s, 2);
- }
- break;
-
- default: /* RET or none of the above. */
- /* BTYPE will be set to 0 by normal end-of-insn processing. */
- break;
- }
-
- s->base.is_jmp = DISAS_JUMP;
}
/* Branches, exception generating and system instructions */
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 26/29] target/arm: Convert ERET, ERETAA, ERETAB to decodetree
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (24 preceding siblings ...)
2023-05-18 12:51 ` [PULL 25/29] target/arm: Convert BRAA, BRAB, BLRAA, BLRAB " Peter Maydell
@ 2023-05-18 12:51 ` Peter Maydell
2023-05-18 12:51 ` [PULL 27/29] target/arm: Saturate L2CTLR_EL1 core count field rather than overflowing Peter Maydell
` (3 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:51 UTC (permalink / raw)
To: qemu-devel
Convert the exception-return insns ERET, ERETA and ERETB to
decodetree. These were the last insns left in the legacy
decoder function disas_uncond_reg_b(), which allows us to
remove it.
The old decoder explicitly decoded the DRPS instruction,
only in order to call unallocated_encoding() on it, exactly
as would have happened if it hadn't decoded it. This is
because this insn always UNDEFs unless the CPU is in
halting-debug state, which we don't emulate. So we list
the pattern in a comment in a64.decode, but don't actively
decode it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-21-peter.maydell@linaro.org
---
target/arm/tcg/a64.decode | 8 ++
target/arm/tcg/translate-a64.c | 163 +++++++++++----------------------
2 files changed, 63 insertions(+), 108 deletions(-)
diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode
index 2fd435b6317..12a310d0a31 100644
--- a/target/arm/tcg/a64.decode
+++ b/target/arm/tcg/a64.decode
@@ -142,3 +142,11 @@ RETA 1101011 0010 11111 00001 m:1 11111 11111 &reta # RETAA, RETAB
&bra rn rm m
BRA 1101011 1000 11111 00001 m:1 rn:5 rm:5 &bra # BRAA, BRAB
BLRA 1101011 1001 11111 00001 m:1 rn:5 rm:5 &bra # BLRAA, BLRAB
+
+ERET 1101011 0100 11111 000000 11111 00000
+ERETA 1101011 0100 11111 00001 m:1 11111 11111 &reta # ERETAA, ERETAB
+
+# We don't need to decode DRPS because it always UNDEFs except when
+# the processor is in halting debug state (which we don't implement).
+# The pattern is listed here as documentation.
+# DRPS 1101011 0101 11111 000000 11111 00000
diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c
index 40a6e59a609..741a6087399 100644
--- a/target/arm/tcg/translate-a64.c
+++ b/target/arm/tcg/translate-a64.c
@@ -1539,6 +1539,61 @@ static bool trans_BLRA(DisasContext *s, arg_bra *a)
return true;
}
+static bool trans_ERET(DisasContext *s, arg_ERET *a)
+{
+ TCGv_i64 dst;
+
+ if (s->current_el == 0) {
+ return false;
+ }
+ if (s->fgt_eret) {
+ gen_exception_insn_el(s, 0, EXCP_UDEF, 0, 2);
+ return true;
+ }
+ dst = tcg_temp_new_i64();
+ tcg_gen_ld_i64(dst, cpu_env,
+ offsetof(CPUARMState, elr_el[s->current_el]));
+
+ if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) {
+ gen_io_start();
+ }
+
+ gen_helper_exception_return(cpu_env, dst);
+ /* Must exit loop to check un-masked IRQs */
+ s->base.is_jmp = DISAS_EXIT;
+ return true;
+}
+
+static bool trans_ERETA(DisasContext *s, arg_reta *a)
+{
+ TCGv_i64 dst;
+
+ if (!dc_isar_feature(aa64_pauth, s)) {
+ return false;
+ }
+ if (s->current_el == 0) {
+ return false;
+ }
+ /* The FGT trap takes precedence over an auth trap. */
+ if (s->fgt_eret) {
+ gen_exception_insn_el(s, 0, EXCP_UDEF, a->m ? 3 : 2, 2);
+ return true;
+ }
+ dst = tcg_temp_new_i64();
+ tcg_gen_ld_i64(dst, cpu_env,
+ offsetof(CPUARMState, elr_el[s->current_el]));
+
+ dst = auth_branch_target(s, dst, cpu_X[31], !a->m);
+ if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) {
+ gen_io_start();
+ }
+
+ gen_helper_exception_return(cpu_env, dst);
+ /* Must exit loop to check un-masked IRQs */
+ s->base.is_jmp = DISAS_EXIT;
+ return true;
+}
+
/* HINT instruction group, including various allocated HINTs */
static void handle_hint(DisasContext *s, uint32_t insn,
unsigned int op1, unsigned int op2, unsigned int crm)
@@ -2307,111 +2362,6 @@ static void disas_exc(DisasContext *s, uint32_t insn)
}
}
-/* Unconditional branch (register)
- * 31 25 24 21 20 16 15 10 9 5 4 0
- * +---------------+-------+-------+-------+------+-------+
- * | 1 1 0 1 0 1 1 | opc | op2 | op3 | Rn | op4 |
- * +---------------+-------+-------+-------+------+-------+
- */
-static void disas_uncond_b_reg(DisasContext *s, uint32_t insn)
-{
- unsigned int opc, op2, op3, rn, op4;
- TCGv_i64 dst;
- TCGv_i64 modifier;
-
- opc = extract32(insn, 21, 4);
- op2 = extract32(insn, 16, 5);
- op3 = extract32(insn, 10, 6);
- rn = extract32(insn, 5, 5);
- op4 = extract32(insn, 0, 5);
-
- if (op2 != 0x1f) {
- goto do_unallocated;
- }
-
- switch (opc) {
- case 0:
- case 1:
- case 2:
- case 8:
- case 9:
- /*
- * BR, BLR, RET, RETAA, RETAB, BRAAZ, BRABZ, BLRAAZ, BLRABZ,
- * BRAA, BLRAA: handled in decodetree
- */
- goto do_unallocated;
-
- case 4: /* ERET */
- if (s->current_el == 0) {
- goto do_unallocated;
- }
- switch (op3) {
- case 0: /* ERET */
- if (op4 != 0) {
- goto do_unallocated;
- }
- if (s->fgt_eret) {
- gen_exception_insn_el(s, 0, EXCP_UDEF, syn_erettrap(op3), 2);
- return;
- }
- dst = tcg_temp_new_i64();
- tcg_gen_ld_i64(dst, cpu_env,
- offsetof(CPUARMState, elr_el[s->current_el]));
- break;
-
- case 2: /* ERETAA */
- case 3: /* ERETAB */
- if (!dc_isar_feature(aa64_pauth, s)) {
- goto do_unallocated;
- }
- if (rn != 0x1f || op4 != 0x1f) {
- goto do_unallocated;
- }
- /* The FGT trap takes precedence over an auth trap. */
- if (s->fgt_eret) {
- gen_exception_insn_el(s, 0, EXCP_UDEF, syn_erettrap(op3), 2);
- return;
- }
- dst = tcg_temp_new_i64();
- tcg_gen_ld_i64(dst, cpu_env,
- offsetof(CPUARMState, elr_el[s->current_el]));
- if (s->pauth_active) {
- modifier = cpu_X[31];
- if (op3 == 2) {
- gen_helper_autia(dst, cpu_env, dst, modifier);
- } else {
- gen_helper_autib(dst, cpu_env, dst, modifier);
- }
- }
- break;
-
- default:
- goto do_unallocated;
- }
- if (tb_cflags(s->base.tb) & CF_USE_ICOUNT) {
- gen_io_start();
- }
-
- gen_helper_exception_return(cpu_env, dst);
- /* Must exit loop to check un-masked IRQs */
- s->base.is_jmp = DISAS_EXIT;
- return;
-
- case 5: /* DRPS */
- if (op3 != 0 || op4 != 0 || rn != 0x1f) {
- goto do_unallocated;
- } else {
- unallocated_encoding(s);
- }
- return;
-
- default:
- do_unallocated:
- unallocated_encoding(s);
- return;
- }
-}
-
/* Branches, exception generating and system instructions */
static void disas_b_exc_sys(DisasContext *s, uint32_t insn)
{
@@ -2427,9 +2377,6 @@ static void disas_b_exc_sys(DisasContext *s, uint32_t insn)
disas_exc(s, insn);
}
break;
- case 0x6b: /* Unconditional branch (register) */
- disas_uncond_b_reg(s, insn);
- break;
default:
unallocated_encoding(s);
break;
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 27/29] target/arm: Saturate L2CTLR_EL1 core count field rather than overflowing
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (25 preceding siblings ...)
2023-05-18 12:51 ` [PULL 26/29] target/arm: Convert ERET, ERETAA, ERETAB " Peter Maydell
@ 2023-05-18 12:51 ` Peter Maydell
2023-05-18 12:51 ` [PULL 28/29] hw/arm/vexpress: Avoid trivial memory leak of 'flashalias' Peter Maydell
` (2 subsequent siblings)
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:51 UTC (permalink / raw)
To: qemu-devel
The IMPDEF sysreg L2CTLR_EL1 found on the Cortex-A35, A53, A57, A72
and which we (arguably dubiously) also provide in '-cpu max' has a
2 bit field for the number of processors in the cluster. On real
hardware this must be sufficient because it can only be configured
with up to 4 CPUs in the cluster. However on QEMU if the board code
does not explicitly configure the code into clusters with the right
CPU count we default to "give the value assuming that all CPUs in
the system are in a single cluster", which might be too big to fit
in the field.
Instead of just overflowing this 2-bit field, saturate to 3 (meaning
"4 CPUs", so at least we don't overwrite other fields in the register.
It's unlikely that any guest code really cares about the value in
this field; at least, if it does it probably also wants the system
to be more closely matching real hardware, i.e. not to have more
than 4 CPUs.
This issue has been present since the L2CTLR was first added in
commit 377a44ec8f2fac5b back in 2014. It was only noticed because
Coverity complains (CID 1509227) that the shift might overflow 32 bits
and inadvertently sign extend into the top half of the 64 bit value.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512170223.3801643-2-peter.maydell@linaro.org
---
target/arm/cortex-regs.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/target/arm/cortex-regs.c b/target/arm/cortex-regs.c
index 17708480e75..ae817b08ddf 100644
--- a/target/arm/cortex-regs.c
+++ b/target/arm/cortex-regs.c
@@ -15,8 +15,15 @@ static uint64_t l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
ARMCPU *cpu = env_archcpu(env);
- /* Number of cores is in [25:24]; otherwise we RAZ */
- return (cpu->core_count - 1) << 24;
+ /*
+ * Number of cores is in [25:24]; otherwise we RAZ.
+ * If the board didn't configure the CPUs into clusters,
+ * we default to "all CPUs in one cluster", which might be
+ * more than the 4 that the hardware permits and which is
+ * all you can report in this two-bit field. Saturate to
+ * 0b11 (== 4 CPUs) rather than overflowing the field.
+ */
+ return MIN(cpu->core_count - 1, 3) << 24;
}
static const ARMCPRegInfo cortex_a72_a57_a53_cp_reginfo[] = {
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 28/29] hw/arm/vexpress: Avoid trivial memory leak of 'flashalias'
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (26 preceding siblings ...)
2023-05-18 12:51 ` [PULL 27/29] target/arm: Saturate L2CTLR_EL1 core count field rather than overflowing Peter Maydell
@ 2023-05-18 12:51 ` Peter Maydell
2023-05-18 12:51 ` [PULL 29/29] docs: Convert u2f.txt to rST Peter Maydell
2023-05-18 14:51 ` [PULL 00/29] target-arm queue Richard Henderson
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:51 UTC (permalink / raw)
To: qemu-devel
In the vexpress board code, we allocate a new MemoryRegion at the top
of vexpress_common_init() but only set it up and use it inside the
"if (map[VE_NORFLASHALIAS] != -1)" conditional, so we leak it if not.
This isn't a very interesting leak as it's a tiny amount of memory
once at startup, but it's easy to fix.
We could silence Coverity simply by moving the g_new() into the
if() block, but this use of g_new(MemoryRegion, 1) is a legacy from
when this board model was originally written; we wouldn't do that
if we wrote it today. The MemoryRegions are conceptually a part of
the board and must not go away until the whole board is done with
(at the end of the simulation), so they belong in its state struct.
This machine already has a VexpressMachineState struct that extends
MachineState, so statically put the MemoryRegions in there instead of
dynamically allocating them separately at runtime.
Spotted by Coverity (CID 1509083).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230512170223.3801643-3-peter.maydell@linaro.org
---
hw/arm/vexpress.c | 40 ++++++++++++++++++++--------------------
1 file changed, 20 insertions(+), 20 deletions(-)
diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c
index 34b012b528b..56abadd9b8b 100644
--- a/hw/arm/vexpress.c
+++ b/hw/arm/vexpress.c
@@ -173,6 +173,11 @@ struct VexpressMachineClass {
struct VexpressMachineState {
MachineState parent;
+ MemoryRegion vram;
+ MemoryRegion sram;
+ MemoryRegion flashalias;
+ MemoryRegion lowram;
+ MemoryRegion a15sram;
bool secure;
bool virt;
};
@@ -182,7 +187,7 @@ struct VexpressMachineState {
#define TYPE_VEXPRESS_A15_MACHINE MACHINE_TYPE_NAME("vexpress-a15")
OBJECT_DECLARE_TYPE(VexpressMachineState, VexpressMachineClass, VEXPRESS_MACHINE)
-typedef void DBoardInitFn(const VexpressMachineState *machine,
+typedef void DBoardInitFn(VexpressMachineState *machine,
ram_addr_t ram_size,
const char *cpu_type,
qemu_irq *pic);
@@ -263,14 +268,13 @@ static void init_cpus(MachineState *ms, const char *cpu_type,
}
}
-static void a9_daughterboard_init(const VexpressMachineState *vms,
+static void a9_daughterboard_init(VexpressMachineState *vms,
ram_addr_t ram_size,
const char *cpu_type,
qemu_irq *pic)
{
MachineState *machine = MACHINE(vms);
MemoryRegion *sysmem = get_system_memory();
- MemoryRegion *lowram = g_new(MemoryRegion, 1);
ram_addr_t low_ram_size;
if (ram_size > 0x40000000) {
@@ -287,9 +291,9 @@ static void a9_daughterboard_init(const VexpressMachineState *vms,
* address space should in theory be remappable to various
* things including ROM or RAM; we always map the RAM there.
*/
- memory_region_init_alias(lowram, NULL, "vexpress.lowmem", machine->ram,
- 0, low_ram_size);
- memory_region_add_subregion(sysmem, 0x0, lowram);
+ memory_region_init_alias(&vms->lowram, NULL, "vexpress.lowmem",
+ machine->ram, 0, low_ram_size);
+ memory_region_add_subregion(sysmem, 0x0, &vms->lowram);
memory_region_add_subregion(sysmem, 0x60000000, machine->ram);
/* 0x1e000000 A9MPCore (SCU) private memory region */
@@ -348,14 +352,13 @@ static VEDBoardInfo a9_daughterboard = {
.init = a9_daughterboard_init,
};
-static void a15_daughterboard_init(const VexpressMachineState *vms,
+static void a15_daughterboard_init(VexpressMachineState *vms,
ram_addr_t ram_size,
const char *cpu_type,
qemu_irq *pic)
{
MachineState *machine = MACHINE(vms);
MemoryRegion *sysmem = get_system_memory();
- MemoryRegion *sram = g_new(MemoryRegion, 1);
{
/* We have to use a separate 64 bit variable here to avoid the gcc
@@ -386,9 +389,9 @@ static void a15_daughterboard_init(const VexpressMachineState *vms,
/* 0x2b060000: SP805 watchdog: not modelled */
/* 0x2b0a0000: PL341 dynamic memory controller: not modelled */
/* 0x2e000000: system SRAM */
- memory_region_init_ram(sram, NULL, "vexpress.a15sram", 0x10000,
+ memory_region_init_ram(&vms->a15sram, NULL, "vexpress.a15sram", 0x10000,
&error_fatal);
- memory_region_add_subregion(sysmem, 0x2e000000, sram);
+ memory_region_add_subregion(sysmem, 0x2e000000, &vms->a15sram);
/* 0x7ffb0000: DMA330 DMA controller: not modelled */
/* 0x7ffd0000: PL354 static memory controller: not modelled */
@@ -547,10 +550,6 @@ static void vexpress_common_init(MachineState *machine)
I2CBus *i2c;
ram_addr_t vram_size, sram_size;
MemoryRegion *sysmem = get_system_memory();
- MemoryRegion *vram = g_new(MemoryRegion, 1);
- MemoryRegion *sram = g_new(MemoryRegion, 1);
- MemoryRegion *flashalias = g_new(MemoryRegion, 1);
- MemoryRegion *flash0mem;
const hwaddr *map = daughterboard->motherboard_map;
int i;
@@ -662,24 +661,25 @@ static void vexpress_common_init(MachineState *machine)
if (map[VE_NORFLASHALIAS] != -1) {
/* Map flash 0 as an alias into low memory */
+ MemoryRegion *flash0mem;
flash0mem = sysbus_mmio_get_region(SYS_BUS_DEVICE(pflash0), 0);
- memory_region_init_alias(flashalias, NULL, "vexpress.flashalias",
+ memory_region_init_alias(&vms->flashalias, NULL, "vexpress.flashalias",
flash0mem, 0, VEXPRESS_FLASH_SIZE);
- memory_region_add_subregion(sysmem, map[VE_NORFLASHALIAS], flashalias);
+ memory_region_add_subregion(sysmem, map[VE_NORFLASHALIAS], &vms->flashalias);
}
dinfo = drive_get(IF_PFLASH, 0, 1);
ve_pflash_cfi01_register(map[VE_NORFLASH1], "vexpress.flash1", dinfo);
sram_size = 0x2000000;
- memory_region_init_ram(sram, NULL, "vexpress.sram", sram_size,
+ memory_region_init_ram(&vms->sram, NULL, "vexpress.sram", sram_size,
&error_fatal);
- memory_region_add_subregion(sysmem, map[VE_SRAM], sram);
+ memory_region_add_subregion(sysmem, map[VE_SRAM], &vms->sram);
vram_size = 0x800000;
- memory_region_init_ram(vram, NULL, "vexpress.vram", vram_size,
+ memory_region_init_ram(&vms->vram, NULL, "vexpress.vram", vram_size,
&error_fatal);
- memory_region_add_subregion(sysmem, map[VE_VIDEORAM], vram);
+ memory_region_add_subregion(sysmem, map[VE_VIDEORAM], &vms->vram);
/* 0x4e000000 LAN9118 Ethernet */
if (nd_table[0].used) {
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [PULL 29/29] docs: Convert u2f.txt to rST
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (27 preceding siblings ...)
2023-05-18 12:51 ` [PULL 28/29] hw/arm/vexpress: Avoid trivial memory leak of 'flashalias' Peter Maydell
@ 2023-05-18 12:51 ` Peter Maydell
2023-05-18 14:51 ` [PULL 00/29] target-arm queue Richard Henderson
29 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2023-05-18 12:51 UTC (permalink / raw)
To: qemu-devel
Convert the u2f.txt file to rST, and place it in the right place
in our manual layout. The old text didn't fit very well into our
manual style, so the new version ends up looking like a rewrite,
although some of the original text is preserved:
* the 'building' section of the old file is removed, since we
generally assume that users have already built QEMU
* some rather verbose text has been cut back
* document the passthrough device first, on the assumption
that's most likely to be of interest to users
* cut back on the duplication of text between sections
* format example command lines etc with rST
As it's a short document it seemed simplest to do this all
in one go rather than try to do a minimal syntactic conversion
and then clean up the wording and layout.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230421163734.1152076-1-peter.maydell@linaro.org
---
docs/system/device-emulation.rst | 1 +
docs/system/devices/usb-u2f.rst | 93 ++++++++++++++++++++++++++
docs/system/devices/usb.rst | 2 +-
docs/u2f.txt | 110 -------------------------------
4 files changed, 95 insertions(+), 111 deletions(-)
create mode 100644 docs/system/devices/usb-u2f.rst
delete mode 100644 docs/u2f.txt
diff --git a/docs/system/device-emulation.rst b/docs/system/device-emulation.rst
index c1b1934e3d3..8d4a1821fa7 100644
--- a/docs/system/device-emulation.rst
+++ b/docs/system/device-emulation.rst
@@ -93,4 +93,5 @@ Emulated Devices
devices/virtio-pmem.rst
devices/vhost-user-rng.rst
devices/canokey.rst
+ devices/usb-u2f.rst
devices/igb.rst
diff --git a/docs/system/devices/usb-u2f.rst b/docs/system/devices/usb-u2f.rst
new file mode 100644
index 00000000000..4f57d5c8c34
--- /dev/null
+++ b/docs/system/devices/usb-u2f.rst
@@ -0,0 +1,93 @@
+Universal Second Factor (U2F) USB Key Device
+============================================
+
+U2F is an open authentication standard that enables relying parties
+exposed to the internet to offer a strong second factor option for end
+user authentication.
+
+The second factor is provided by a device implementing the U2F
+protocol. In case of a USB U2F security key, it is a USB HID device
+that implements the U2F protocol.
+
+QEMU supports both pass-through of a host U2F key device to a VM,
+and software emulation of a U2F key.
+
+``u2f-passthru``
+----------------
+
+The ``u2f-passthru`` device allows you to connect a real hardware
+U2F key on your host to a guest VM. All requests made from the guest
+are passed through to the physical security key connected to the
+host machine and vice versa.
+
+In addition, the dedicated pass-through allows you to share a single
+U2F security key with several guest VMs, which is not possible with a
+simple host device assignment pass-through.
+
+You can specify the host U2F key to use with the ``hidraw``
+option, which takes the host path to a Linux ``/dev/hidrawN`` device:
+
+.. parsed-literal::
+ |qemu_system| -usb -device u2f-passthru,hidraw=/dev/hidraw0
+
+If you don't specify the device, the ``u2f-passthru`` device will
+autoscan to take the first U2F device it finds on the host (this
+requires a working libudev):
+
+.. parsed-literal::
+ |qemu_system| -usb -device u2f-passthru
+
+``u2f-emulated``
+----------------
+
+``u2f-emulated`` is a completely software emulated U2F device.
+It uses `libu2f-emu <https://github.com/MattGorko/libu2f-emu>`__
+for the U2F key emulation. libu2f-emu
+provides a complete implementation of the U2F protocol device part for
+all specified transports given by the FIDO Alliance.
+
+To work, an emulated U2F device must have four elements:
+
+ * ec x509 certificate
+ * ec private key
+ * counter (four bytes value)
+ * 48 bytes of entropy (random bits)
+
+To use this type of device, these have to be configured, and these
+four elements must be passed one way or another.
+
+Assuming that you have a working libu2f-emu installed on the host,
+there are three possible ways to configure the ``u2f-emulated`` device:
+
+ * ephemeral
+ * setup directory
+ * manual
+
+Ephemeral is the simplest way to configure; it lets the device generate
+all the elements it needs for a single use of the lifetime of the device.
+It is the default if you do not pass any other options to the device.
+
+.. parsed-literal::
+ |qemu_system| -usb -device u2f-emulated
+
+You can pass the device the path of a setup directory on the host
+using the ``dir`` option; the directory must contain these four files:
+
+ * ``certificate.pem``: ec x509 certificate
+ * ``private-key.pem``: ec private key
+ * ``counter``: counter value
+ * ``entropy``: 48 bytes of entropy
+
+.. parsed-literal::
+ |qemu_system| -usb -device u2f-emulated,dir=$dir
+
+You can also manually pass the device the paths to each of these files,
+if you don't want them all to be in the same directory, using the options
+
+ * ``cert``
+ * ``priv``
+ * ``counter``
+ * ``entropy``
+
+.. parsed-literal::
+ |qemu_system| -usb -device u2f-emulated,cert=$DIR1/$FILE1,priv=$DIR2/$FILE2,counter=$DIR3/$FILE3,entropy=$DIR4/$FILE4
diff --git a/docs/system/devices/usb.rst b/docs/system/devices/usb.rst
index 74166810731..a6ca7b0c375 100644
--- a/docs/system/devices/usb.rst
+++ b/docs/system/devices/usb.rst
@@ -207,7 +207,7 @@ option or the ``device_add`` monitor command. Available devices are:
USB audio device
``u2f-{emulated,passthru}``
- Universal Second Factor device
+ :doc:`usb-u2f`
``canokey``
An Open-source Secure Key implementing FIDO2, OpenPGP, PIV and more.
diff --git a/docs/u2f.txt b/docs/u2f.txt
deleted file mode 100644
index 7f5813a0b72..00000000000
--- a/docs/u2f.txt
+++ /dev/null
@@ -1,110 +0,0 @@
-QEMU U2F Key Device Documentation.
-
-Contents
-1. USB U2F key device
-2. Building
-3. Using u2f-emulated
-4. Using u2f-passthru
-5. Libu2f-emu
-
-1. USB U2F key device
-
-U2F is an open authentication standard that enables relying parties
-exposed to the internet to offer a strong second factor option for end
-user authentication.
-
-The standard brings many advantages to both parties, client and server,
-allowing to reduce over-reliance on passwords, it increases authentication
-security and simplifies passwords.
-
-The second factor is materialized by a device implementing the U2F
-protocol. In case of a USB U2F security key, it is a USB HID device
-that implements the U2F protocol.
-
-In QEMU, the USB U2F key device offers a dedicated support of U2F, allowing
-guest USB FIDO/U2F security keys operating in two possible modes:
-pass-through and emulated.
-
-The pass-through mode consists of passing all requests made from the guest
-to the physical security key connected to the host machine and vice versa.
-In addition, the dedicated pass-through allows to have a U2F security key
-shared on several guests which is not possible with a simple host device
-assignment pass-through.
-
-The emulated mode consists of completely emulating the behavior of an
-U2F device through software part. Libu2f-emu is used for that.
-
-
-2. Building
-
-To ensure the build of the u2f-emulated device variant which depends
-on libu2f-emu: configuring and building:
-
- ./configure --enable-u2f && make
-
-The pass-through mode is built by default on Linux. To take advantage
-of the autoscan option it provides, make sure you have a working libudev
-installed on the host.
-
-
-3. Using u2f-emulated
-
-To work, an emulated U2F device must have four elements:
- * ec x509 certificate
- * ec private key
- * counter (four bytes value)
- * 48 bytes of entropy (random bits)
-
-To use this type of device, this one has to be configured, and these
-four elements must be passed one way or another.
-
-Assuming that you have a working libu2f-emu installed on the host.
-There are three possible ways of configurations:
- * ephemeral
- * setup directory
- * manual
-
-Ephemeral is the simplest way to configure, it lets the device generate
-all the elements it needs for a single use of the lifetime of the device.
-
- qemu -usb -device u2f-emulated
-
-Setup directory allows to configure the device from a directory containing
-four files:
- * certificate.pem: ec x509 certificate
- * private-key.pem: ec private key
- * counter: counter value
- * entropy: 48 bytes of entropy
-
- qemu -usb -device u2f-emulated,dir=$dir
-
-Manual allows to configure the device more finely by specifying each
-of the elements necessary for the device:
- * cert
- * priv
- * counter
- * entropy
-
- qemu -usb -device u2f-emulated,cert=$DIR1/$FILE1,priv=$DIR2/$FILE2,counter=$DIR3/$FILE3,entropy=$DIR4/$FILE4
-
-
-4. Using u2f-passthru
-
-On the host specify the u2f-passthru device with a suitable hidraw:
-
- qemu -usb -device u2f-passthru,hidraw=/dev/hidraw0
-
-Alternately, the u2f-passthru device can autoscan to take the first
-U2F device it finds on the host (this requires a working libudev):
-
- qemu -usb -device u2f-passthru
-
-
-5. Libu2f-emu
-
-The u2f-emulated device uses libu2f-emu for the U2F key emulation. Libu2f-emu
-implements completely the U2F protocol device part for all specified
-transport given by the FIDO Alliance.
-
-For more information about libu2f-emu see this page:
-https://github.com/MattGorko/libu2f-emu.
--
2.34.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* Re: [PULL 00/29] target-arm queue
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
` (28 preceding siblings ...)
2023-05-18 12:51 ` [PULL 29/29] docs: Convert u2f.txt to rST Peter Maydell
@ 2023-05-18 14:51 ` Richard Henderson
29 siblings, 0 replies; 41+ messages in thread
From: Richard Henderson @ 2023-05-18 14:51 UTC (permalink / raw)
To: Peter Maydell, qemu-devel
On 5/18/23 05:50, Peter Maydell wrote:
> Hi; this mostly contains the first slice of A64 decodetree
> patches, plus some other minor pieces. It also has the
> enablement of MTE for KVM guests.
>
> thanks
> -- PMM
>
> The following changes since commit d27e7c359330ba7020bdbed7ed2316cb4cf6ffc1:
>
> qapi/parser: Drop two bad type hints for now (2023-05-17 10:18:33 -0700)
>
> are available in the Git repository at:
>
> https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230518
>
> for you to fetch changes up to 91608e2a44f36e79cb83f863b8a7bb57d2c98061:
>
> docs: Convert u2f.txt to rST (2023-05-18 11:40:32 +0100)
>
> ----------------------------------------------------------------
> target-arm queue:
> * Fix vd == vm overlap in sve_ldff1_z
> * Add support for MTE with KVM guests
> * Add RAZ/WI handling for DBGDTR[TX|RX]
> * Start of conversion of A64 decoder to decodetree
> * Saturate L2CTLR_EL1 core count field rather than overflowing
> * vexpress: Avoid trivial memory leak of 'flashalias'
> * sbsa-ref: switch default cpu core to Neoverse-N1
> * sbsa-ref: use Bochs graphics card instead of VGA
> * MAINTAINERS: Add Marcin Juszkiewicz to sbsa-ref reviewer list
> * docs: Convert u2f.txt to rST
Applied, thanks. Please update https://wiki.qemu.org/ChangeLog/8.1 as appropriate.
r~
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [PULL 04/29] arm/kvm: add support for MTE
2023-05-18 12:50 ` [PULL 04/29] arm/kvm: add support for MTE Peter Maydell
@ 2023-05-19 12:51 ` Alex Bennée
2023-05-19 13:31 ` Peter Maydell
0 siblings, 1 reply; 41+ messages in thread
From: Alex Bennée @ 2023-05-19 12:51 UTC (permalink / raw)
To: Peter Maydell; +Cc: qemu-devel, Cornelia Huck
Peter Maydell <peter.maydell@linaro.org> writes:
> From: Cornelia Huck <cohuck@redhat.com>
>
> Extend the 'mte' property for the virt machine to cover KVM as
> well. For KVM, we don't allocate tag memory, but instead enable the
> capability.
>
> If MTE has been enabled, we need to disable migration, as we do not
> yet have a way to migrate the tags as well. Therefore, MTE will stay
> off with KVM unless requested explicitly.
>
> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
> Message-id: 20230428095533.21747-2-cohuck@redhat.com
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I bisected to this commit which causes a segfault on one of my test
kernels (6.3.2 arm64):
➜ ag MTE .config
486:CONFIG_ARM64_AS_HAS_MTE=y
487:CONFIG_ARM64_MTE=y
2949:CONFIG_WLAN_VENDOR_ADMTEK=y
3573:# CONFIG_I2C_SIMTEC is not set
5278:# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
9749:CONFIG_ARCH_USE_MEMTEST=y
9750:CONFIG_MEMTEST=y
And crashed with a nullptr deref:
➜ gdb --args ./qemu-system-aarch64 -cpu max,pauth-impdef=on -machine type=virt,virtualization=on,gic-version=3 -display none -serial mon:stdio -netdev user,id=unet,hostfwd=
tcp::2222-:22,hostfwd=tcp::1234-:1234 -device virtio-net-pci,netdev=unet -kernel ~/lsrc/linux.git/builds/arm64.initramfs/arch/arm64/boot/Image -append "console=ttyAMA0 init=\"busybox poweroff\"" -m 4096 -object memory-backend-file,id=mem,size=4G,mem-path=/dev/shm,share=on -numa node,memdev=mem -smp 4
GNU gdb (Debian 13.1-2) 13.1
Copyright (C) 2023 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<https://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Executed .gdbinit
Reading symbols from ./qemu-system-aarch64...
(gdb) r
Starting program: /home/alex/lsrc/qemu.git/builds/arm.debug/qemu-system-aarch64 -cpu max,pauth-impdef=on -machine type=virt,virtualization=on,gic-version=3 -display none -serial mon:stdio -netdev user,id=unet,hostfwd=tcp::2222-:22,hostfwd=tcp::1234-:1234 -device virtio-net-pci,netdev=unet -kernel /home/alex/lsrc/linux.git/builds/arm64.initramfs/arch/arm64/boot/Image -append console=ttyAMA0\ init=\"busybox\ poweroff\" -m 4096 -object memory-backend-file,id=mem,size=4G,mem-path=/dev/shm,share=on -numa node,memdev=mem -smp 4
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
[New Thread 0x7fffe71e26c0 (LWP 1701008)]
[New Thread 0x7fffe666d6c0 (LWP 1701009)]
[New Thread 0x7fffe5e6c6c0 (LWP 1701010)]
[New Thread 0x7fffe566b6c0 (LWP 1701011)]
[New Thread 0x7fffe4e6a6c0 (LWP 1701012)]
Thread 3 "qemu-system-aar" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fffe666d6c0 (LWP 1701009)]
0x0000555556005725 in address_space_to_flatview (as=0x67726f223d656d61) at /home/alex/lsrc/qemu.git/include/exec/memory.h:1105
1105 return qatomic_rcu_read(&as->current_map);
(gdb) bt
#0 0x0000555556005725 in address_space_to_flatview (as=0x67726f223d656d61) at /home/alex/lsrc/qemu.git/include/exec/memory.h:1105
#1 0x000055555600578b in address_space_translate (as=0x67726f223d656d61, addr=35765504, xlat=0x7fffe6667c10, len=0x0, is_write=false, attrs=...)
at /home/alex/lsrc/qemu.git/include/exec/memory.h:2792
#2 0x000055555600600e in allocation_tag_mem
(env=0x555557512000, ptr_mmu_idx=3, ptr=18446462598803595264, ptr_access=MMU_DATA_STORE, ptr_size=256, tag_access=MMU_DATA_LOAD, tag_size=8, ra=140734806726420)
at ../../target/arm/tcg/mte_helper.c:176
#3 0x0000555556006aee in helper_stgm (env=0x555557512000, ptr=18446462598803595264, val=0) at ../../target/arm/tcg/mte_helper.c:461
#4 0x00007fff60299714 in code_gen_buffer ()
#5 0x000055555617d0e4 in cpu_tb_exec (cpu=0x55555750f800, itb=0x7fffa0299600, tb_exit=0x7fffe6668270) at ../../accel/tcg/cpu-exec.c:460
#6 0x000055555617dd79 in cpu_loop_exec_tb (cpu=0x55555750f800, tb=0x7fffa0299600, pc=18446603336361784892, last_tb=0x7fffe6668280, tb_exit=0x7fffe6668270)
at ../../accel/tcg/cpu-exec.c:893
#7 0x000055555617e0e3 in cpu_exec_loop (cpu=0x55555750f800, sc=0x7fffe6668300) at ../../accel/tcg/cpu-exec.c:1013
#8 0x000055555617e1e3 in cpu_exec_setjmp (cpu=0x55555750f800, sc=0x7fffe6668300) at ../../accel/tcg/cpu-exec.c:1043
#9 0x000055555617e26a in cpu_exec (cpu=0x55555750f800) at ../../accel/tcg/cpu-exec.c:1069
#10 0x00005555561a43ac in tcg_cpus_exec (cpu=0x55555750f800) at ../../accel/tcg/tcg-accel-ops.c:81
#11 0x00005555561a4a64 in mttcg_cpu_thread_fn (arg=0x55555750f800) at ../../accel/tcg/tcg-accel-ops-mttcg.c:95
#12 0x00005555563ba633 in qemu_thread_start (args=0x5555575afae0) at ../../util/qemu-thread-posix.c:541
#13 0x00007ffff4b17fd4 in start_thread (arg=<optimized out>) at ./nptl/pthread_create.c:442
#14 0x00007ffff4b985bc in clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81
(gdb) thread 0
Invalid thread ID: 0
(gdb) frame 0
#0 0x0000555556005725 in address_space_to_flatview (as=0x67726f223d656d61) at /home/alex/lsrc/qemu.git/include/exec/memory.h:1105
1105 return qatomic_rcu_read(&as->current_map);
(gdb) p as
$1 = (AddressSpace *) 0x67726f223d656d61
(gdb) p *$
Cannot access memory at address 0x67726f223d656d61
(gdb) f 2
#2 0x000055555600600e in allocation_tag_mem (env=0x555557512000, ptr_mmu_idx=3, ptr=18446462598803595264, ptr_access=MMU_DATA_STORE, ptr_size=256,
tag_access=MMU_DATA_LOAD, tag_size=8, ra=140734806726420) at ../../target/arm/tcg/mte_helper.c:176
176 mr = address_space_translate(tag_as, tag_paddr, &xlat, NULL,
(gdb) l
171 tag_paddr = ptr_paddr >> (LOG2_TAG_GRANULE + 1);
172
173 /* Look up the address in tag space. */
174 tag_asi = attrs.secure ? ARMASIdx_TagS : ARMASIdx_TagNS;
175 tag_as = cpu_get_address_space(env_cpu(env), tag_asi);
176 mr = address_space_translate(tag_as, tag_paddr, &xlat, NULL,
177 tag_access == MMU_DATA_STORE, attrs);
178
179 /*
180 * Note that @mr will never be NULL. If there is nothing in the address
(gdb) p tag_as
$2 = (AddressSpace *) 0x67726f223d656d61
(gdb) p *$
Cannot access memory at address 0x67726f223d656d61
> ---
> target/arm/cpu.h | 4 +++
> target/arm/kvm_arm.h | 19 ++++++++++++
> hw/arm/virt.c | 73 +++++++++++++++++++++++++-------------------
> target/arm/cpu.c | 9 +++---
> target/arm/kvm.c | 35 +++++++++++++++++++++
> target/arm/kvm64.c | 5 +++
> 6 files changed, 109 insertions(+), 36 deletions(-)
>
> diff --git a/target/arm/cpu.h b/target/arm/cpu.h
> index d469a2637b3..c3463e39bcd 100644
> --- a/target/arm/cpu.h
> +++ b/target/arm/cpu.h
> @@ -935,6 +935,9 @@ struct ArchCPU {
> */
> uint32_t psci_conduit;
>
> + /* CPU has Memory Tag Extension */
> + bool has_mte;
> +
> /* For v8M, initial value of the Secure VTOR */
> uint32_t init_svtor;
> /* For v8M, initial value of the Non-secure VTOR */
> @@ -1053,6 +1056,7 @@ struct ArchCPU {
> bool prop_pauth;
> bool prop_pauth_impdef;
> bool prop_lpa2;
> + OnOffAuto prop_mte;
>
> /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */
> uint32_t dcz_blocksize;
> diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h
> index 330fbe5c722..2083547bf60 100644
> --- a/target/arm/kvm_arm.h
> +++ b/target/arm/kvm_arm.h
> @@ -313,6 +313,13 @@ bool kvm_arm_pmu_supported(void);
> */
> bool kvm_arm_sve_supported(void);
>
> +/**
> + * kvm_arm_mte_supported:
> + *
> + * Returns: true if KVM can enable MTE, and false otherwise.
> + */
> +bool kvm_arm_mte_supported(void);
> +
> /**
> * kvm_arm_get_max_vm_ipa_size:
> * @ms: Machine state handle
> @@ -377,6 +384,8 @@ void kvm_arm_pvtime_init(CPUState *cs, uint64_t ipa);
>
> int kvm_arm_set_irq(int cpu, int irqtype, int irq, int level);
>
> +void kvm_arm_enable_mte(Object *cpuobj, Error **errp);
> +
> #else
>
> /*
> @@ -403,6 +412,11 @@ static inline bool kvm_arm_steal_time_supported(void)
> return false;
> }
>
> +static inline bool kvm_arm_mte_supported(void)
> +{
> + return false;
> +}
> +
> /*
> * These functions should never actually be called without KVM support.
> */
> @@ -451,6 +465,11 @@ static inline uint32_t kvm_arm_sve_get_vls(CPUState *cs)
> g_assert_not_reached();
> }
>
> +static inline void kvm_arm_enable_mte(Object *cpuobj, Error **errp)
> +{
> + g_assert_not_reached();
> +}
> +
> #endif
>
> static inline const char *gic_class_name(void)
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index b99ae185016..06b514b25c3 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -2146,7 +2146,7 @@ static void machvirt_init(MachineState *machine)
> exit(1);
> }
>
> - if (vms->mte && (kvm_enabled() || hvf_enabled())) {
> + if (vms->mte && hvf_enabled()) {
> error_report("mach-virt: %s does not support providing "
> "MTE to the guest CPU",
> current_accel_name());
> @@ -2216,39 +2216,48 @@ static void machvirt_init(MachineState *machine)
> }
>
> if (vms->mte) {
> - /* Create the memory region only once, but link to all cpus. */
> - if (!tag_sysmem) {
> - /*
> - * The property exists only if MemTag is supported.
> - * If it is, we must allocate the ram to back that up.
> - */
> - if (!object_property_find(cpuobj, "tag-memory")) {
> - error_report("MTE requested, but not supported "
> - "by the guest CPU");
> + if (tcg_enabled()) {
> + /* Create the memory region only once, but link to all cpus. */
> + if (!tag_sysmem) {
> + /*
> + * The property exists only if MemTag is supported.
> + * If it is, we must allocate the ram to back that up.
> + */
> + if (!object_property_find(cpuobj, "tag-memory")) {
> + error_report("MTE requested, but not supported "
> + "by the guest CPU");
> + exit(1);
> + }
> +
> + tag_sysmem = g_new(MemoryRegion, 1);
> + memory_region_init(tag_sysmem, OBJECT(machine),
> + "tag-memory", UINT64_MAX / 32);
> +
> + if (vms->secure) {
> + secure_tag_sysmem = g_new(MemoryRegion, 1);
> + memory_region_init(secure_tag_sysmem, OBJECT(machine),
> + "secure-tag-memory",
> + UINT64_MAX / 32);
> +
> + /* As with ram, secure-tag takes precedence over tag. */
> + memory_region_add_subregion_overlap(secure_tag_sysmem,
> + 0, tag_sysmem, -1);
> + }
> + }
> +
> + object_property_set_link(cpuobj, "tag-memory",
> + OBJECT(tag_sysmem), &error_abort);
> + if (vms->secure) {
> + object_property_set_link(cpuobj, "secure-tag-memory",
> + OBJECT(secure_tag_sysmem),
> + &error_abort);
> + }
> + } else if (kvm_enabled()) {
> + if (!kvm_arm_mte_supported()) {
> + error_report("MTE requested, but not supported by KVM");
> exit(1);
> }
> -
> - tag_sysmem = g_new(MemoryRegion, 1);
> - memory_region_init(tag_sysmem, OBJECT(machine),
> - "tag-memory", UINT64_MAX / 32);
> -
> - if (vms->secure) {
> - secure_tag_sysmem = g_new(MemoryRegion, 1);
> - memory_region_init(secure_tag_sysmem, OBJECT(machine),
> - "secure-tag-memory", UINT64_MAX / 32);
> -
> - /* As with ram, secure-tag takes precedence over tag. */
> - memory_region_add_subregion_overlap(secure_tag_sysmem, 0,
> - tag_sysmem, -1);
> - }
> - }
> -
> - object_property_set_link(cpuobj, "tag-memory", OBJECT(tag_sysmem),
> - &error_abort);
> - if (vms->secure) {
> - object_property_set_link(cpuobj, "secure-tag-memory",
> - OBJECT(secure_tag_sysmem),
> - &error_abort);
> + kvm_arm_enable_mte(cpuobj, &error_abort);
> }
> }
>
> diff --git a/target/arm/cpu.c b/target/arm/cpu.c
> index 5182ed0c911..f6a88e52ac2 100644
> --- a/target/arm/cpu.c
> +++ b/target/arm/cpu.c
> @@ -1480,6 +1480,7 @@ void arm_cpu_post_init(Object *obj)
> qdev_prop_allow_set_link_before_realize,
> OBJ_PROP_LINK_STRONG);
> }
> + cpu->has_mte = true;
> }
> #endif
> }
> @@ -1616,7 +1617,7 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
> }
> if (cpu->tag_memory) {
> error_setg(errp,
> - "Cannot enable %s when guest CPUs has MTE enabled",
> + "Cannot enable %s when guest CPUs has tag memory enabled",
> current_accel_name());
> return;
> }
> @@ -1996,10 +1997,10 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
> }
>
> #ifndef CONFIG_USER_ONLY
> - if (cpu->tag_memory == NULL && cpu_isar_feature(aa64_mte, cpu)) {
> + if (!cpu->has_mte && cpu_isar_feature(aa64_mte, cpu)) {
> /*
> - * Disable the MTE feature bits if we do not have tag-memory
> - * provided by the machine.
> + * Disable the MTE feature bits if we do not have the feature
> + * setup by the machine.
> */
> cpu->isar.id_aa64pfr1 =
> FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0);
> diff --git a/target/arm/kvm.c b/target/arm/kvm.c
> index 84da49332c4..9553488ecd1 100644
> --- a/target/arm/kvm.c
> +++ b/target/arm/kvm.c
> @@ -31,6 +31,7 @@
> #include "hw/boards.h"
> #include "hw/irq.h"
> #include "qemu/log.h"
> +#include "migration/blocker.h"
>
> const KVMCapabilityInfo kvm_arch_required_capabilities[] = {
> KVM_CAP_LAST_INFO
> @@ -1064,3 +1065,37 @@ bool kvm_arch_cpu_check_are_resettable(void)
> void kvm_arch_accel_class_init(ObjectClass *oc)
> {
> }
> +
> +void kvm_arm_enable_mte(Object *cpuobj, Error **errp)
> +{
> + static bool tried_to_enable;
> + static bool succeeded_to_enable;
> + Error *mte_migration_blocker = NULL;
> + int ret;
> +
> + if (!tried_to_enable) {
> + /*
> + * MTE on KVM is enabled on a per-VM basis (and retrying doesn't make
> + * sense), and we only want a single migration blocker as well.
> + */
> + tried_to_enable = true;
> +
> + ret = kvm_vm_enable_cap(kvm_state, KVM_CAP_ARM_MTE, 0);
> + if (ret) {
> + error_setg_errno(errp, -ret, "Failed to enable KVM_CAP_ARM_MTE");
> + return;
> + }
> +
> + /* TODO: add proper migration support with MTE enabled */
> + error_setg(&mte_migration_blocker,
> + "Live migration disabled due to MTE enabled");
> + if (migrate_add_blocker(mte_migration_blocker, errp)) {
> + error_free(mte_migration_blocker);
> + return;
> + }
> + succeeded_to_enable = true;
> + }
> + if (succeeded_to_enable) {
> + object_property_set_bool(cpuobj, "has_mte", true, NULL);
> + }
> +}
> diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c
> index 810db33ccbd..1893f387936 100644
> --- a/target/arm/kvm64.c
> +++ b/target/arm/kvm64.c
> @@ -756,6 +756,11 @@ bool kvm_arm_steal_time_supported(void)
> return kvm_check_extension(kvm_state, KVM_CAP_STEAL_TIME);
> }
>
> +bool kvm_arm_mte_supported(void)
> +{
> + return kvm_check_extension(kvm_state, KVM_CAP_ARM_MTE);
> +}
> +
> QEMU_BUILD_BUG_ON(KVM_ARM64_SVE_VQ_MIN != 1);
>
> uint32_t kvm_arm_sve_get_vls(CPUState *cs)
--
Alex Bennée
Virtualisation Tech Lead @ Linaro
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [PULL 04/29] arm/kvm: add support for MTE
2023-05-19 12:51 ` Alex Bennée
@ 2023-05-19 13:31 ` Peter Maydell
2023-05-19 14:52 ` Peter Maydell
0 siblings, 1 reply; 41+ messages in thread
From: Peter Maydell @ 2023-05-19 13:31 UTC (permalink / raw)
To: Alex Bennée; +Cc: qemu-devel, Cornelia Huck
On Fri, 19 May 2023 at 13:55, Alex Bennée <alex.bennee@linaro.org> wrote:
>
>
> Peter Maydell <peter.maydell@linaro.org> writes:
>
> > From: Cornelia Huck <cohuck@redhat.com>
> >
> > Extend the 'mte' property for the virt machine to cover KVM as
> > well. For KVM, we don't allocate tag memory, but instead enable the
> > capability.
> >
> > If MTE has been enabled, we need to disable migration, as we do not
> > yet have a way to migrate the tags as well. Therefore, MTE will stay
> > off with KVM unless requested explicitly.
> >
> > Signed-off-by: Cornelia Huck <cohuck@redhat.com>
> > Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
> > Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
> > Message-id: 20230428095533.21747-2-cohuck@redhat.com
> > Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
>
> I bisected to this commit which causes a segfault on one of my test
> kernels (6.3.2 arm64):
>
> ➜ ag MTE .config
> 486:CONFIG_ARM64_AS_HAS_MTE=y
> 487:CONFIG_ARM64_MTE=y
> 2949:CONFIG_WLAN_VENDOR_ADMTEK=y
> 3573:# CONFIG_I2C_SIMTEC is not set
> 5278:# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
> 9749:CONFIG_ARCH_USE_MEMTEST=y
> 9750:CONFIG_MEMTEST=y
Try this entirely untested patch?
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index f6a88e52ac2..f350661a928 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -1593,6 +1593,15 @@ static void arm_cpu_realizefn(DeviceState *dev,
Error **errp)
}
}
+ /*
+ * For TCG, we can only present MTE to the guest if the board gave us
+ * tag RAM. Set has_mte appropriately so code below doesn't need to
+ * care whether we're TCG or KVM when deciding if MTE is present.
+ */
+ if (tcg_enabled() || qtest_enabled()) {
+ cpu->has_mte = cpu->tag_memory != NULL;
+ }
+
if (!tcg_enabled() && !qtest_enabled()) {
/*
* We assume that no accelerator except TCG (and the "not really an
(Signed-off-by: Peter Maydell <peter.maydell@linaro.org> if it
works and you want to turn it into a proper patch...)
-- PMM
^ permalink raw reply related [flat|nested] 41+ messages in thread
* Re: [PULL 04/29] arm/kvm: add support for MTE
2023-05-19 13:31 ` Peter Maydell
@ 2023-05-19 14:52 ` Peter Maydell
2023-05-22 9:48 ` Cornelia Huck
0 siblings, 1 reply; 41+ messages in thread
From: Peter Maydell @ 2023-05-19 14:52 UTC (permalink / raw)
To: Alex Bennée; +Cc: qemu-devel, Cornelia Huck
On Fri, 19 May 2023 at 14:31, Peter Maydell <peter.maydell@linaro.org> wrote:
>
> On Fri, 19 May 2023 at 13:55, Alex Bennée <alex.bennee@linaro.org> wrote:
> >
> >
> > Peter Maydell <peter.maydell@linaro.org> writes:
> >
> > > From: Cornelia Huck <cohuck@redhat.com>
> > >
> > > Extend the 'mte' property for the virt machine to cover KVM as
> > > well. For KVM, we don't allocate tag memory, but instead enable the
> > > capability.
> > >
> > > If MTE has been enabled, we need to disable migration, as we do not
> > > yet have a way to migrate the tags as well. Therefore, MTE will stay
> > > off with KVM unless requested explicitly.
> > >
> > > Signed-off-by: Cornelia Huck <cohuck@redhat.com>
> > > Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
> > > Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
> > > Message-id: 20230428095533.21747-2-cohuck@redhat.com
> > > Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> >
> > I bisected to this commit which causes a segfault on one of my test
> > kernels (6.3.2 arm64):
> >
> > ➜ ag MTE .config
> > 486:CONFIG_ARM64_AS_HAS_MTE=y
> > 487:CONFIG_ARM64_MTE=y
> > 2949:CONFIG_WLAN_VENDOR_ADMTEK=y
> > 3573:# CONFIG_I2C_SIMTEC is not set
> > 5278:# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
> > 9749:CONFIG_ARCH_USE_MEMTEST=y
> > 9750:CONFIG_MEMTEST=y
>
> Try this entirely untested patch?
>
> diff --git a/target/arm/cpu.c b/target/arm/cpu.c
> index f6a88e52ac2..f350661a928 100644
> --- a/target/arm/cpu.c
> +++ b/target/arm/cpu.c
> @@ -1593,6 +1593,15 @@ static void arm_cpu_realizefn(DeviceState *dev,
> Error **errp)
> }
> }
>
> + /*
> + * For TCG, we can only present MTE to the guest if the board gave us
> + * tag RAM. Set has_mte appropriately so code below doesn't need to
> + * care whether we're TCG or KVM when deciding if MTE is present.
> + */
> + if (tcg_enabled() || qtest_enabled()) {
> + cpu->has_mte = cpu->tag_memory != NULL;
> + }
> +
> if (!tcg_enabled() && !qtest_enabled()) {
> /*
> * We assume that no accelerator except TCG (and the "not really an
Hmm, actually I don't think that's the only fix needed. It's OK for
TCG, but for KVM I can't see anywhere in the code that ever sets
has_mte to false. We default it to on in the cpu.c code, but
then the board code only sets it to true if MTE is enabled
(via kvm_arm_enable_mte()).
Let's just revert the patch while we figure out the right logic.
I'll send a revert patch in a moment.
thanks
-- PMM
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [PULL 04/29] arm/kvm: add support for MTE
2023-05-19 14:52 ` Peter Maydell
@ 2023-05-22 9:48 ` Cornelia Huck
2023-05-22 10:12 ` Alex Bennée
0 siblings, 1 reply; 41+ messages in thread
From: Cornelia Huck @ 2023-05-22 9:48 UTC (permalink / raw)
To: Peter Maydell, Alex Bennée; +Cc: qemu-devel
On Fri, May 19 2023, Peter Maydell <peter.maydell@linaro.org> wrote:
> On Fri, 19 May 2023 at 14:31, Peter Maydell <peter.maydell@linaro.org> wrote:
>>
>> On Fri, 19 May 2023 at 13:55, Alex Bennée <alex.bennee@linaro.org> wrote:
>> >
>> >
>> > Peter Maydell <peter.maydell@linaro.org> writes:
>> >
>> > > From: Cornelia Huck <cohuck@redhat.com>
>> > >
>> > > Extend the 'mte' property for the virt machine to cover KVM as
>> > > well. For KVM, we don't allocate tag memory, but instead enable the
>> > > capability.
>> > >
>> > > If MTE has been enabled, we need to disable migration, as we do not
>> > > yet have a way to migrate the tags as well. Therefore, MTE will stay
>> > > off with KVM unless requested explicitly.
>> > >
>> > > Signed-off-by: Cornelia Huck <cohuck@redhat.com>
>> > > Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
>> > > Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
>> > > Message-id: 20230428095533.21747-2-cohuck@redhat.com
>> > > Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
>> >
>> > I bisected to this commit which causes a segfault on one of my test
>> > kernels (6.3.2 arm64):
>> >
>> > ➜ ag MTE .config
>> > 486:CONFIG_ARM64_AS_HAS_MTE=y
>> > 487:CONFIG_ARM64_MTE=y
>> > 2949:CONFIG_WLAN_VENDOR_ADMTEK=y
>> > 3573:# CONFIG_I2C_SIMTEC is not set
>> > 5278:# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
>> > 9749:CONFIG_ARCH_USE_MEMTEST=y
>> > 9750:CONFIG_MEMTEST=y
Sigh, this patch seems to be cursed :( Apologies for the fallout.
(I'm wondering what makes this pop up, maybe the CONFIG_MEMTEST?)
>>
>> Try this entirely untested patch?
>>
>> diff --git a/target/arm/cpu.c b/target/arm/cpu.c
>> index f6a88e52ac2..f350661a928 100644
>> --- a/target/arm/cpu.c
>> +++ b/target/arm/cpu.c
>> @@ -1593,6 +1593,15 @@ static void arm_cpu_realizefn(DeviceState *dev,
>> Error **errp)
>> }
>> }
>>
>> + /*
>> + * For TCG, we can only present MTE to the guest if the board gave us
>> + * tag RAM. Set has_mte appropriately so code below doesn't need to
>> + * care whether we're TCG or KVM when deciding if MTE is present.
>> + */
>> + if (tcg_enabled() || qtest_enabled()) {
>> + cpu->has_mte = cpu->tag_memory != NULL;
>> + }
>> +
>> if (!tcg_enabled() && !qtest_enabled()) {
>> /*
>> * We assume that no accelerator except TCG (and the "not really an
>
> Hmm, actually I don't think that's the only fix needed. It's OK for
> TCG, but for KVM I can't see anywhere in the code that ever sets
> has_mte to false. We default it to on in the cpu.c code, but
> then the board code only sets it to true if MTE is enabled
> (via kvm_arm_enable_mte()).
Hrm, do we need explicit init of this field? Probably needless to say
that I didn't hit this problem in any of my tests... I suspect that only
specific kernels hit this?
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [PULL 04/29] arm/kvm: add support for MTE
2023-05-22 9:48 ` Cornelia Huck
@ 2023-05-22 10:12 ` Alex Bennée
0 siblings, 0 replies; 41+ messages in thread
From: Alex Bennée @ 2023-05-22 10:12 UTC (permalink / raw)
To: Cornelia Huck; +Cc: Peter Maydell, qemu-devel
[-- Attachment #1: Type: text/plain, Size: 3284 bytes --]
Cornelia Huck <cohuck@redhat.com> writes:
> On Fri, May 19 2023, Peter Maydell <peter.maydell@linaro.org> wrote:
>
>> On Fri, 19 May 2023 at 14:31, Peter Maydell <peter.maydell@linaro.org> wrote:
>>>
>>> On Fri, 19 May 2023 at 13:55, Alex Bennée <alex.bennee@linaro.org> wrote:
>>> >
>>> >
>>> > Peter Maydell <peter.maydell@linaro.org> writes:
>>> >
>>> > > From: Cornelia Huck <cohuck@redhat.com>
>>> > >
>>> > > Extend the 'mte' property for the virt machine to cover KVM as
>>> > > well. For KVM, we don't allocate tag memory, but instead enable the
>>> > > capability.
>>> > >
>>> > > If MTE has been enabled, we need to disable migration, as we do not
>>> > > yet have a way to migrate the tags as well. Therefore, MTE will stay
>>> > > off with KVM unless requested explicitly.
>>> > >
>>> > > Signed-off-by: Cornelia Huck <cohuck@redhat.com>
>>> > > Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
>>> > > Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
>>> > > Message-id: 20230428095533.21747-2-cohuck@redhat.com
>>> > > Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
>>> >
>>> > I bisected to this commit which causes a segfault on one of my test
>>> > kernels (6.3.2 arm64):
>>> >
>>> > ➜ ag MTE .config
>>> > 486:CONFIG_ARM64_AS_HAS_MTE=y
>>> > 487:CONFIG_ARM64_MTE=y
>>> > 2949:CONFIG_WLAN_VENDOR_ADMTEK=y
>>> > 3573:# CONFIG_I2C_SIMTEC is not set
>>> > 5278:# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
>>> > 9749:CONFIG_ARCH_USE_MEMTEST=y
>>> > 9750:CONFIG_MEMTEST=y
>
> Sigh, this patch seems to be cursed :( Apologies for the fallout.
>
> (I'm wondering what makes this pop up, maybe the CONFIG_MEMTEST?)
>
>>>
>>> Try this entirely untested patch?
>>>
>>> diff --git a/target/arm/cpu.c b/target/arm/cpu.c
>>> index f6a88e52ac2..f350661a928 100644
>>> --- a/target/arm/cpu.c
>>> +++ b/target/arm/cpu.c
>>> @@ -1593,6 +1593,15 @@ static void arm_cpu_realizefn(DeviceState *dev,
>>> Error **errp)
>>> }
>>> }
>>>
>>> + /*
>>> + * For TCG, we can only present MTE to the guest if the board gave us
>>> + * tag RAM. Set has_mte appropriately so code below doesn't need to
>>> + * care whether we're TCG or KVM when deciding if MTE is present.
>>> + */
>>> + if (tcg_enabled() || qtest_enabled()) {
>>> + cpu->has_mte = cpu->tag_memory != NULL;
>>> + }
>>> +
>>> if (!tcg_enabled() && !qtest_enabled()) {
>>> /*
>>> * We assume that no accelerator except TCG (and the "not really an
>>
>> Hmm, actually I don't think that's the only fix needed. It's OK for
>> TCG, but for KVM I can't see anywhere in the code that ever sets
>> has_mte to false. We default it to on in the cpu.c code, but
>> then the board code only sets it to true if MTE is enabled
>> (via kvm_arm_enable_mte()).
>
> Hrm, do we need explicit init of this field? Probably needless to say
> that I didn't hit this problem in any of my tests... I suspect that only
> specific kernels hit this?
Yes - my local test kernel usually has a rotating case of all the bells
and whistles enabled so catches things like this. I didn't attempt to
bisect the config but here is the current state if its useful:
[-- Attachment #2: config for my failing kernel setup --]
[-- Type: application/gzip, Size: 58034 bytes --]
[-- Attachment #3: Type: text/plain, Size: 214 bytes --]
I think it would be worthwhile adding a specific MTE enabled kernel to
the avocado tests if none of the existing ones can be booted up with MTE
enabled.
--
Alex Bennée
Virtualisation Tech Lead @ Linaro
^ permalink raw reply [flat|nested] 41+ messages in thread
* [PULL 00/29] target-arm queue
@ 2022-12-15 12:49 Peter Maydell
0 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2022-12-15 12:49 UTC (permalink / raw)
To: qemu-devel
First arm pullreq of the 8.0 series...
The following changes since commit ae2b87341b5ddb0dcb1b3f2d4f586ef18de75873:
Merge tag 'pull-qapi-2022-12-14-v2' of https://repo.or.cz/qemu/armbru into staging (2022-12-14 22:42:14 +0000)
are available in the Git repository at:
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20221215
for you to fetch changes up to 4f3ebdc33618e7c163f769047859d6f34373e3af:
target/arm: Restrict arm_cpu_exec_interrupt() to TCG accelerator (2022-12-15 11:18:20 +0000)
----------------------------------------------------------------
target-arm queue:
* hw/arm/virt: Add properties to allow more granular
configuration of use of highmem space
* target/arm: Add Cortex-A55 CPU
* hw/intc/arm_gicv3: Fix GICD_TYPER ITLinesNumber advertisement
* Implement FEAT_EVT
* Some 3-phase-reset conversions for Arm GIC, SMMU
* hw/arm/boot: set initrd with #address-cells type in fdt
* align user-mode exposed ID registers with Linux
* hw/misc: Move some arm-related files from specific_ss into softmmu_ss
* Restrict arm_cpu_exec_interrupt() to TCG accelerator
----------------------------------------------------------------
Gavin Shan (7):
hw/arm/virt: Introduce virt_set_high_memmap() helper
hw/arm/virt: Rename variable size to region_size in virt_set_high_memmap()
hw/arm/virt: Introduce variable region_base in virt_set_high_memmap()
hw/arm/virt: Introduce virt_get_high_memmap_enabled() helper
hw/arm/virt: Improve high memory region address assignment
hw/arm/virt: Add 'compact-highmem' property
hw/arm/virt: Add properties to disable high memory regions
Luke Starrett (1):
hw/intc/arm_gicv3: Fix GICD_TYPER ITLinesNumber advertisement
Mihai Carabas (1):
hw/arm/virt: build SMBIOS 19 table
Peter Maydell (15):
target/arm: Allow relevant HCR bits to be written for FEAT_EVT
target/arm: Implement HCR_EL2.TTLBIS traps
target/arm: Implement HCR_EL2.TTLBOS traps
target/arm: Implement HCR_EL2.TICAB,TOCU traps
target/arm: Implement HCR_EL2.TID4 traps
target/arm: Report FEAT_EVT for TCG '-cpu max'
hw/arm: Convert TYPE_ARM_SMMU to 3-phase reset
hw/arm: Convert TYPE_ARM_SMMUV3 to 3-phase reset
hw/intc: Convert TYPE_ARM_GIC_COMMON to 3-phase reset
hw/intc: Convert TYPE_ARM_GIC_KVM to 3-phase reset
hw/intc: Convert TYPE_ARM_GICV3_COMMON to 3-phase reset
hw/intc: Convert TYPE_KVM_ARM_GICV3 to 3-phase reset
hw/intc: Convert TYPE_ARM_GICV3_ITS_COMMON to 3-phase reset
hw/intc: Convert TYPE_ARM_GICV3_ITS to 3-phase reset
hw/intc: Convert TYPE_KVM_ARM_ITS to 3-phase reset
Philippe Mathieu-Daudé (1):
target/arm: Restrict arm_cpu_exec_interrupt() to TCG accelerator
Schspa Shi (1):
hw/arm/boot: set initrd with #address-cells type in fdt
Thomas Huth (1):
hw/misc: Move some arm-related files from specific_ss into softmmu_ss
Timofey Kutergin (1):
target/arm: Add Cortex-A55 CPU
Zhuojia Shen (1):
target/arm: align exposed ID registers with Linux
docs/system/arm/emulation.rst | 1 +
docs/system/arm/virt.rst | 18 +++
include/hw/arm/smmuv3.h | 2 +-
include/hw/arm/virt.h | 2 +
include/hw/misc/xlnx-zynqmp-apu-ctrl.h | 2 +-
target/arm/cpu.h | 30 +++++
target/arm/kvm-consts.h | 8 +-
hw/arm/boot.c | 10 +-
hw/arm/smmu-common.c | 7 +-
hw/arm/smmuv3.c | 12 +-
hw/arm/virt.c | 202 +++++++++++++++++++++++-----
hw/intc/arm_gic_common.c | 7 +-
hw/intc/arm_gic_kvm.c | 14 +-
hw/intc/arm_gicv3_common.c | 7 +-
hw/intc/arm_gicv3_dist.c | 4 +-
hw/intc/arm_gicv3_its.c | 14 +-
hw/intc/arm_gicv3_its_common.c | 7 +-
hw/intc/arm_gicv3_its_kvm.c | 14 +-
hw/intc/arm_gicv3_kvm.c | 14 +-
hw/misc/imx6_src.c | 2 +-
hw/misc/iotkit-sysctl.c | 1 -
target/arm/cpu.c | 5 +-
target/arm/cpu64.c | 70 ++++++++++
target/arm/cpu_tcg.c | 1 +
target/arm/helper.c | 231 ++++++++++++++++++++++++---------
hw/misc/meson.build | 11 +-
26 files changed, 538 insertions(+), 158 deletions(-)
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [PULL 00/29] target-arm queue
2020-06-05 16:49 Peter Maydell
2020-06-05 20:10 ` no-reply
@ 2020-06-08 10:04 ` Peter Maydell
1 sibling, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2020-06-08 10:04 UTC (permalink / raw)
To: QEMU Developers
On Fri, 5 Jun 2020 at 17:50, Peter Maydell <peter.maydell@linaro.org> wrote:
>
> Arm queue; some of the simpler stuff, things other have reviewed (thanks!), etc.
>
> -- PMM
>
> The following changes since commit 5d2f557b47dfbf8f23277a5bdd8473d4607c681a:
>
> Merge remote-tracking branch 'remotes/kraxel/tags/vga-20200605-pull-request' into staging (2020-06-05 13:53:05 +0100)
>
> are available in the Git repository at:
>
> https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200605
>
> for you to fetch changes up to 2c35a39eda0b16c2ed85c94cec204bf5efb97812:
>
> target/arm: Convert Neon one-register-and-immediate insns to decodetree (2020-06-05 17:23:10 +0100)
>
> ----------------------------------------------------------------
> target-arm queue:
> hw/ssi/imx_spi: Handle tx burst lengths other than 8 correctly
> hw/input/pxa2xx_keypad: Replace hw_error() by qemu_log_mask()
> hw/arm/pxa2xx: Replace printf() call by qemu_log_mask()
> target/arm: Convert crypto insns to gvec
> hw/adc/stm32f2xx_adc: Correct memory region size and access size
> tests/acceptance: Add a boot test for the xlnx-versal-virt machine
> docs/system: Document Aspeed boards
> raspi: Add model of the USB controller
> target/arm: Convert 2-reg-and-shift and 1-reg-imm Neon insns to decodetree
>
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/5.1
for any user-visible changes.
-- PMM
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [PULL 00/29] target-arm queue
2020-06-05 16:49 Peter Maydell
@ 2020-06-05 20:10 ` no-reply
2020-06-08 10:04 ` Peter Maydell
1 sibling, 0 replies; 41+ messages in thread
From: no-reply @ 2020-06-05 20:10 UTC (permalink / raw)
To: peter.maydell; +Cc: qemu-devel
Patchew URL: https://patchew.org/QEMU/20200605165007.12095-1-peter.maydell@linaro.org/
Hi,
This series seems to have some coding style problems. See output below for
more information:
Message-id: 20200605165007.12095-1-peter.maydell@linaro.org
Subject: [PULL 00/29] target-arm queue
Type: series
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu
5d2f557..175198a master -> master
Switched to a new branch 'test'
8d19bb1 target/arm: Convert Neon one-register-and-immediate insns to decodetree
c07ebcb target/arm: Convert VCVT fixed-point ops to decodetree
595e77e target/arm: Convert Neon VSHLL, VMOVL to decodetree
0f42979 target/arm: Convert Neon narrowing shifts with op==9 to decodetree
93549e8 target/arm: Convert Neon narrowing shifts with op==8 to decodetree
f0efe71 target/arm: Convert VQSHLU, VQSHL 2-reg-shift insns to decodetree
c0457fa target/arm: Convert Neon VSRA, VSRI, VRSHR, VRSRA 2-reg-shift insns to decodetree
7e946c5 target/arm: Convert Neon VSHR 2-reg-shift insns to decodetree
3daf164 target/arm: Convert Neon VSHL and VSLI 2-reg-shift insn to decodetree
725f9e4 raspi2 acceptance test: add test for dwc-hsotg (dwc2) USB host
2a56c0c wire in the dwc-hsotg (dwc2) USB host controller emulation
f9720e8 usb: add short-packet handling to usb-storage driver
d6df0bc dwc-hsotg (dwc2) USB host controller emulation
26ec413 dwc-hsotg (dwc2) USB host controller state definitions
27c3b07 dwc-hsotg (dwc2) USB host controller register definitions
3f982e5 raspi: add BCM2835 SOC MPHI emulation
21a59c9 docs/system: Document Aspeed boards
65b3e83 tests/acceptance: Add a boot test for the xlnx-versal-virt machine
a494cb0 hw/adc/stm32f2xx_adc: Correct memory region size and access size
abbdeb5 target/arm: Split helper_crypto_sm3tt
0db4fd4 target/arm: Split helper_crypto_sha1_3reg
00ad42c target/arm: Convert sha1 and sha256 to gvec helpers
96fc084 target/arm: Convert sha512 and sm3 to gvec helpers
5199605 target/arm: Convert rax1 to gvec helpers
7cd9082 target/arm: Convert aes and sm4 to gvec helpers
188335a hw/arm/pxa2xx: Replace printf() call by qemu_log_mask()
240dce6 hw/input/pxa2xx_keypad: Replace hw_error() by qemu_log_mask()
b09557e hw/ssi/imx_spi: Removed unnecessary cast of rx data received from slave
f979463 hw/ssi/imx_spi: changed while statement to prevent underflow
=== OUTPUT BEGIN ===
1/29 Checking commit f979463e1fdd (hw/ssi/imx_spi: changed while statement to prevent underflow)
2/29 Checking commit b09557efe185 (hw/ssi/imx_spi: Removed unnecessary cast of rx data received from slave)
3/29 Checking commit 240dce66be50 (hw/input/pxa2xx_keypad: Replace hw_error() by qemu_log_mask())
4/29 Checking commit 188335aa83c3 (hw/arm/pxa2xx: Replace printf() call by qemu_log_mask())
5/29 Checking commit 7cd9082434bd (target/arm: Convert aes and sm4 to gvec helpers)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#396:
new file mode 100644
total: 0 errors, 1 warnings, 364 lines checked
Patch 5/29 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
6/29 Checking commit 519960531b00 (target/arm: Convert rax1 to gvec helpers)
7/29 Checking commit 96fc08401629 (target/arm: Convert sha512 and sm3 to gvec helpers)
8/29 Checking commit 00ad42c753c1 (target/arm: Convert sha1 and sha256 to gvec helpers)
ERROR: spaces required around that '*' (ctx:WxV)
#270: FILE: target/arm/translate-neon.inc.c:735:
+ static bool trans_##NAME##_3s(DisasContext *s, arg_3same *a) \
^
total: 1 errors, 0 warnings, 366 lines checked
Patch 8/29 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
9/29 Checking commit 0db4fd4a19b7 (target/arm: Split helper_crypto_sha1_3reg)
ERROR: spaces required around that '*' (ctx:WxV)
#246: FILE: target/arm/translate-neon.inc.c:698:
+ static bool trans_##NAME##_3s(DisasContext *s, arg_3same *a) \
^
total: 1 errors, 0 warnings, 243 lines checked
Patch 9/29 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
10/29 Checking commit abbdeb5eb100 (target/arm: Split helper_crypto_sm3tt)
11/29 Checking commit a494cb00d665 (hw/adc/stm32f2xx_adc: Correct memory region size and access size)
12/29 Checking commit 65b3e832526b (tests/acceptance: Add a boot test for the xlnx-versal-virt machine)
13/29 Checking commit 21a59c942494 (docs/system: Document Aspeed boards)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#14:
new file mode 100644
total: 0 errors, 1 warnings, 92 lines checked
Patch 13/29 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
14/29 Checking commit 3f982e580b4f (raspi: add BCM2835 SOC MPHI emulation)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#67:
new file mode 100644
WARNING: line over 80 characters
#222: FILE: hw/misc/bcm2835_mphi.c:151:
+ memory_region_init_io(&s->iomem, obj, &mphi_mmio_ops, s, "mphi", MPHI_MMIO_SIZE);
total: 0 errors, 2 warnings, 285 lines checked
Patch 14/29 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
15/29 Checking commit 27c3b07beecb (dwc-hsotg (dwc2) USB host controller register definitions)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#21:
new file mode 100644
WARNING: architecture specific defines should be avoided
#67: FILE: include/hw/usb/dwc2-regs.h:42:
+#ifndef __DWC2_HW_H__
ERROR: code indent should never use tabs
#70: FILE: include/hw/usb/dwc2-regs.h:45:
+#define HSOTG_REG(x)^I(x)$
ERROR: code indent should never use tabs
#72: FILE: include/hw/usb/dwc2-regs.h:47:
+#define GOTGCTL^I^I^I^IHSOTG_REG(0x000)$
ERROR: code indent should never use tabs
#73: FILE: include/hw/usb/dwc2-regs.h:48:
+#define GOTGCTL_CHIRPEN^I^I^IBIT(27)$
ERROR: code indent should never use tabs
#74: FILE: include/hw/usb/dwc2-regs.h:49:
+#define GOTGCTL_MULT_VALID_BC_MASK^I(0x1f << 22)$
ERROR: code indent should never use tabs
#75: FILE: include/hw/usb/dwc2-regs.h:50:
+#define GOTGCTL_MULT_VALID_BC_SHIFT^I22$
ERROR: code indent should never use tabs
#76: FILE: include/hw/usb/dwc2-regs.h:51:
+#define GOTGCTL_OTGVER^I^I^IBIT(20)$
ERROR: code indent should never use tabs
#77: FILE: include/hw/usb/dwc2-regs.h:52:
+#define GOTGCTL_BSESVLD^I^I^IBIT(19)$
ERROR: code indent should never use tabs
#78: FILE: include/hw/usb/dwc2-regs.h:53:
+#define GOTGCTL_ASESVLD^I^I^IBIT(18)$
ERROR: code indent should never use tabs
#79: FILE: include/hw/usb/dwc2-regs.h:54:
+#define GOTGCTL_DBNC_SHORT^I^IBIT(17)$
ERROR: code indent should never use tabs
#80: FILE: include/hw/usb/dwc2-regs.h:55:
+#define GOTGCTL_CONID_B^I^I^IBIT(16)$
ERROR: code indent should never use tabs
#81: FILE: include/hw/usb/dwc2-regs.h:56:
+#define GOTGCTL_DBNCE_FLTR_BYPASS^IBIT(15)$
ERROR: code indent should never use tabs
#82: FILE: include/hw/usb/dwc2-regs.h:57:
+#define GOTGCTL_DEVHNPEN^I^IBIT(11)$
ERROR: code indent should never use tabs
#83: FILE: include/hw/usb/dwc2-regs.h:58:
+#define GOTGCTL_HSTSETHNPEN^I^IBIT(10)$
ERROR: code indent should never use tabs
#84: FILE: include/hw/usb/dwc2-regs.h:59:
+#define GOTGCTL_HNPREQ^I^I^IBIT(9)$
ERROR: code indent should never use tabs
#85: FILE: include/hw/usb/dwc2-regs.h:60:
+#define GOTGCTL_HSTNEGSCS^I^IBIT(8)$
ERROR: code indent should never use tabs
#86: FILE: include/hw/usb/dwc2-regs.h:61:
+#define GOTGCTL_SESREQ^I^I^IBIT(1)$
ERROR: code indent should never use tabs
#87: FILE: include/hw/usb/dwc2-regs.h:62:
+#define GOTGCTL_SESREQSCS^I^IBIT(0)$
ERROR: code indent should never use tabs
#89: FILE: include/hw/usb/dwc2-regs.h:64:
+#define GOTGINT^I^I^I^IHSOTG_REG(0x004)$
ERROR: code indent should never use tabs
#90: FILE: include/hw/usb/dwc2-regs.h:65:
+#define GOTGINT_DBNCE_DONE^I^IBIT(19)$
ERROR: code indent should never use tabs
#91: FILE: include/hw/usb/dwc2-regs.h:66:
+#define GOTGINT_A_DEV_TOUT_CHG^I^IBIT(18)$
ERROR: code indent should never use tabs
#92: FILE: include/hw/usb/dwc2-regs.h:67:
+#define GOTGINT_HST_NEG_DET^I^IBIT(17)$
ERROR: code indent should never use tabs
#93: FILE: include/hw/usb/dwc2-regs.h:68:
+#define GOTGINT_HST_NEG_SUC_STS_CHNG^IBIT(9)$
ERROR: code indent should never use tabs
#94: FILE: include/hw/usb/dwc2-regs.h:69:
+#define GOTGINT_SES_REQ_SUC_STS_CHNG^IBIT(8)$
ERROR: code indent should never use tabs
#95: FILE: include/hw/usb/dwc2-regs.h:70:
+#define GOTGINT_SES_END_DET^I^IBIT(2)$
ERROR: code indent should never use tabs
#97: FILE: include/hw/usb/dwc2-regs.h:72:
+#define GAHBCFG^I^I^I^IHSOTG_REG(0x008)$
ERROR: code indent should never use tabs
#98: FILE: include/hw/usb/dwc2-regs.h:73:
+#define GAHBCFG_AHB_SINGLE^I^IBIT(23)$
ERROR: code indent should never use tabs
#99: FILE: include/hw/usb/dwc2-regs.h:74:
+#define GAHBCFG_NOTI_ALL_DMA_WRIT^IBIT(22)$
ERROR: code indent should never use tabs
#100: FILE: include/hw/usb/dwc2-regs.h:75:
+#define GAHBCFG_REM_MEM_SUPP^I^IBIT(21)$
ERROR: code indent should never use tabs
#101: FILE: include/hw/usb/dwc2-regs.h:76:
+#define GAHBCFG_P_TXF_EMP_LVL^I^IBIT(8)$
ERROR: code indent should never use tabs
#102: FILE: include/hw/usb/dwc2-regs.h:77:
+#define GAHBCFG_NP_TXF_EMP_LVL^I^IBIT(7)$
ERROR: code indent should never use tabs
#103: FILE: include/hw/usb/dwc2-regs.h:78:
+#define GAHBCFG_DMA_EN^I^I^IBIT(5)$
ERROR: code indent should never use tabs
#104: FILE: include/hw/usb/dwc2-regs.h:79:
+#define GAHBCFG_HBSTLEN_MASK^I^I(0xf << 1)$
ERROR: code indent should never use tabs
#105: FILE: include/hw/usb/dwc2-regs.h:80:
+#define GAHBCFG_HBSTLEN_SHIFT^I^I1$
ERROR: code indent should never use tabs
#106: FILE: include/hw/usb/dwc2-regs.h:81:
+#define GAHBCFG_HBSTLEN_SINGLE^I^I0$
ERROR: code indent should never use tabs
#107: FILE: include/hw/usb/dwc2-regs.h:82:
+#define GAHBCFG_HBSTLEN_INCR^I^I1$
ERROR: code indent should never use tabs
#108: FILE: include/hw/usb/dwc2-regs.h:83:
+#define GAHBCFG_HBSTLEN_INCR4^I^I3$
ERROR: code indent should never use tabs
#109: FILE: include/hw/usb/dwc2-regs.h:84:
+#define GAHBCFG_HBSTLEN_INCR8^I^I5$
ERROR: code indent should never use tabs
#110: FILE: include/hw/usb/dwc2-regs.h:85:
+#define GAHBCFG_HBSTLEN_INCR16^I^I7$
ERROR: code indent should never use tabs
#111: FILE: include/hw/usb/dwc2-regs.h:86:
+#define GAHBCFG_GLBL_INTR_EN^I^IBIT(0)$
ERROR: code indent should never use tabs
#112: FILE: include/hw/usb/dwc2-regs.h:87:
+#define GAHBCFG_CTRL_MASK^I^I(GAHBCFG_P_TXF_EMP_LVL | \$
ERROR: code indent should never use tabs
#113: FILE: include/hw/usb/dwc2-regs.h:88:
+^I^I^I^I^I GAHBCFG_NP_TXF_EMP_LVL | \$
ERROR: code indent should never use tabs
#114: FILE: include/hw/usb/dwc2-regs.h:89:
+^I^I^I^I^I GAHBCFG_DMA_EN | \$
ERROR: code indent should never use tabs
#115: FILE: include/hw/usb/dwc2-regs.h:90:
+^I^I^I^I^I GAHBCFG_GLBL_INTR_EN)$
ERROR: code indent should never use tabs
#117: FILE: include/hw/usb/dwc2-regs.h:92:
+#define GUSBCFG^I^I^I^IHSOTG_REG(0x00C)$
ERROR: code indent should never use tabs
#118: FILE: include/hw/usb/dwc2-regs.h:93:
+#define GUSBCFG_FORCEDEVMODE^I^IBIT(30)$
ERROR: code indent should never use tabs
#119: FILE: include/hw/usb/dwc2-regs.h:94:
+#define GUSBCFG_FORCEHOSTMODE^I^IBIT(29)$
ERROR: code indent should never use tabs
#120: FILE: include/hw/usb/dwc2-regs.h:95:
+#define GUSBCFG_TXENDDELAY^I^IBIT(28)$
ERROR: code indent should never use tabs
#121: FILE: include/hw/usb/dwc2-regs.h:96:
+#define GUSBCFG_ICTRAFFICPULLREMOVE^IBIT(27)$
ERROR: code indent should never use tabs
#122: FILE: include/hw/usb/dwc2-regs.h:97:
+#define GUSBCFG_ICUSBCAP^I^IBIT(26)$
ERROR: code indent should never use tabs
#123: FILE: include/hw/usb/dwc2-regs.h:98:
+#define GUSBCFG_ULPI_INT_PROT_DIS^IBIT(25)$
ERROR: code indent should never use tabs
#124: FILE: include/hw/usb/dwc2-regs.h:99:
+#define GUSBCFG_INDICATORPASSTHROUGH^IBIT(24)$
ERROR: code indent should never use tabs
#125: FILE: include/hw/usb/dwc2-regs.h:100:
+#define GUSBCFG_INDICATORCOMPLEMENT^IBIT(23)$
ERROR: code indent should never use tabs
#126: FILE: include/hw/usb/dwc2-regs.h:101:
+#define GUSBCFG_TERMSELDLPULSE^I^IBIT(22)$
ERROR: code indent should never use tabs
#127: FILE: include/hw/usb/dwc2-regs.h:102:
+#define GUSBCFG_ULPI_INT_VBUS_IND^IBIT(21)$
ERROR: code indent should never use tabs
#128: FILE: include/hw/usb/dwc2-regs.h:103:
+#define GUSBCFG_ULPI_EXT_VBUS_DRV^IBIT(20)$
ERROR: code indent should never use tabs
#129: FILE: include/hw/usb/dwc2-regs.h:104:
+#define GUSBCFG_ULPI_CLK_SUSP_M^I^IBIT(19)$
ERROR: code indent should never use tabs
#130: FILE: include/hw/usb/dwc2-regs.h:105:
+#define GUSBCFG_ULPI_AUTO_RES^I^IBIT(18)$
ERROR: code indent should never use tabs
#131: FILE: include/hw/usb/dwc2-regs.h:106:
+#define GUSBCFG_ULPI_FS_LS^I^IBIT(17)$
ERROR: code indent should never use tabs
#132: FILE: include/hw/usb/dwc2-regs.h:107:
+#define GUSBCFG_OTG_UTMI_FS_SEL^I^IBIT(16)$
ERROR: code indent should never use tabs
#133: FILE: include/hw/usb/dwc2-regs.h:108:
+#define GUSBCFG_PHY_LP_CLK_SEL^I^IBIT(15)$
ERROR: code indent should never use tabs
#134: FILE: include/hw/usb/dwc2-regs.h:109:
+#define GUSBCFG_USBTRDTIM_MASK^I^I(0xf << 10)$
ERROR: code indent should never use tabs
#135: FILE: include/hw/usb/dwc2-regs.h:110:
+#define GUSBCFG_USBTRDTIM_SHIFT^I^I10$
ERROR: code indent should never use tabs
#136: FILE: include/hw/usb/dwc2-regs.h:111:
+#define GUSBCFG_HNPCAP^I^I^IBIT(9)$
ERROR: code indent should never use tabs
#137: FILE: include/hw/usb/dwc2-regs.h:112:
+#define GUSBCFG_SRPCAP^I^I^IBIT(8)$
ERROR: code indent should never use tabs
#138: FILE: include/hw/usb/dwc2-regs.h:113:
+#define GUSBCFG_DDRSEL^I^I^IBIT(7)$
ERROR: code indent should never use tabs
#139: FILE: include/hw/usb/dwc2-regs.h:114:
+#define GUSBCFG_PHYSEL^I^I^IBIT(6)$
ERROR: code indent should never use tabs
#140: FILE: include/hw/usb/dwc2-regs.h:115:
+#define GUSBCFG_FSINTF^I^I^IBIT(5)$
ERROR: code indent should never use tabs
#141: FILE: include/hw/usb/dwc2-regs.h:116:
+#define GUSBCFG_ULPI_UTMI_SEL^I^IBIT(4)$
ERROR: code indent should never use tabs
#142: FILE: include/hw/usb/dwc2-regs.h:117:
+#define GUSBCFG_PHYIF16^I^I^IBIT(3)$
ERROR: code indent should never use tabs
#143: FILE: include/hw/usb/dwc2-regs.h:118:
+#define GUSBCFG_PHYIF8^I^I^I(0 << 3)$
ERROR: code indent should never use tabs
#144: FILE: include/hw/usb/dwc2-regs.h:119:
+#define GUSBCFG_TOUTCAL_MASK^I^I(0x7 << 0)$
ERROR: code indent should never use tabs
#145: FILE: include/hw/usb/dwc2-regs.h:120:
+#define GUSBCFG_TOUTCAL_SHIFT^I^I0$
ERROR: code indent should never use tabs
#146: FILE: include/hw/usb/dwc2-regs.h:121:
+#define GUSBCFG_TOUTCAL_LIMIT^I^I0x7$
ERROR: code indent should never use tabs
#147: FILE: include/hw/usb/dwc2-regs.h:122:
+#define GUSBCFG_TOUTCAL(_x)^I^I((_x) << 0)$
ERROR: code indent should never use tabs
#149: FILE: include/hw/usb/dwc2-regs.h:124:
+#define GRSTCTL^I^I^I^IHSOTG_REG(0x010)$
ERROR: code indent should never use tabs
#150: FILE: include/hw/usb/dwc2-regs.h:125:
+#define GRSTCTL_AHBIDLE^I^I^IBIT(31)$
ERROR: code indent should never use tabs
#151: FILE: include/hw/usb/dwc2-regs.h:126:
+#define GRSTCTL_DMAREQ^I^I^IBIT(30)$
ERROR: code indent should never use tabs
#152: FILE: include/hw/usb/dwc2-regs.h:127:
+#define GRSTCTL_TXFNUM_MASK^I^I(0x1f << 6)$
ERROR: code indent should never use tabs
#153: FILE: include/hw/usb/dwc2-regs.h:128:
+#define GRSTCTL_TXFNUM_SHIFT^I^I6$
ERROR: code indent should never use tabs
#154: FILE: include/hw/usb/dwc2-regs.h:129:
+#define GRSTCTL_TXFNUM_LIMIT^I^I0x1f$
ERROR: code indent should never use tabs
#155: FILE: include/hw/usb/dwc2-regs.h:130:
+#define GRSTCTL_TXFNUM(_x)^I^I((_x) << 6)$
ERROR: code indent should never use tabs
#156: FILE: include/hw/usb/dwc2-regs.h:131:
+#define GRSTCTL_TXFFLSH^I^I^IBIT(5)$
ERROR: code indent should never use tabs
#157: FILE: include/hw/usb/dwc2-regs.h:132:
+#define GRSTCTL_RXFFLSH^I^I^IBIT(4)$
ERROR: code indent should never use tabs
#158: FILE: include/hw/usb/dwc2-regs.h:133:
+#define GRSTCTL_IN_TKNQ_FLSH^I^IBIT(3)$
ERROR: code indent should never use tabs
#159: FILE: include/hw/usb/dwc2-regs.h:134:
+#define GRSTCTL_FRMCNTRRST^I^IBIT(2)$
ERROR: code indent should never use tabs
#160: FILE: include/hw/usb/dwc2-regs.h:135:
+#define GRSTCTL_HSFTRST^I^I^IBIT(1)$
ERROR: code indent should never use tabs
#161: FILE: include/hw/usb/dwc2-regs.h:136:
+#define GRSTCTL_CSFTRST^I^I^IBIT(0)$
ERROR: code indent should never use tabs
#163: FILE: include/hw/usb/dwc2-regs.h:138:
+#define GINTSTS^I^I^I^IHSOTG_REG(0x014)$
ERROR: code indent should never use tabs
#164: FILE: include/hw/usb/dwc2-regs.h:139:
+#define GINTMSK^I^I^I^IHSOTG_REG(0x018)$
ERROR: code indent should never use tabs
#165: FILE: include/hw/usb/dwc2-regs.h:140:
+#define GINTSTS_WKUPINT^I^I^IBIT(31)$
ERROR: code indent should never use tabs
#166: FILE: include/hw/usb/dwc2-regs.h:141:
+#define GINTSTS_SESSREQINT^I^IBIT(30)$
ERROR: code indent should never use tabs
#167: FILE: include/hw/usb/dwc2-regs.h:142:
+#define GINTSTS_DISCONNINT^I^IBIT(29)$
ERROR: code indent should never use tabs
#168: FILE: include/hw/usb/dwc2-regs.h:143:
+#define GINTSTS_CONIDSTSCHNG^I^IBIT(28)$
ERROR: code indent should never use tabs
#169: FILE: include/hw/usb/dwc2-regs.h:144:
+#define GINTSTS_LPMTRANRCVD^I^IBIT(27)$
ERROR: code indent should never use tabs
#170: FILE: include/hw/usb/dwc2-regs.h:145:
+#define GINTSTS_PTXFEMP^I^I^IBIT(26)$
ERROR: code indent should never use tabs
#171: FILE: include/hw/usb/dwc2-regs.h:146:
+#define GINTSTS_HCHINT^I^I^IBIT(25)$
ERROR: code indent should never use tabs
#172: FILE: include/hw/usb/dwc2-regs.h:147:
+#define GINTSTS_PRTINT^I^I^IBIT(24)$
ERROR: code indent should never use tabs
#173: FILE: include/hw/usb/dwc2-regs.h:148:
+#define GINTSTS_RESETDET^I^IBIT(23)$
ERROR: code indent should never use tabs
#174: FILE: include/hw/usb/dwc2-regs.h:149:
+#define GINTSTS_FET_SUSP^I^IBIT(22)$
ERROR: code indent should never use tabs
#175: FILE: include/hw/usb/dwc2-regs.h:150:
+#define GINTSTS_INCOMPL_IP^I^IBIT(21)$
ERROR: code indent should never use tabs
#176: FILE: include/hw/usb/dwc2-regs.h:151:
+#define GINTSTS_INCOMPL_SOOUT^I^IBIT(21)$
ERROR: code indent should never use tabs
#177: FILE: include/hw/usb/dwc2-regs.h:152:
+#define GINTSTS_INCOMPL_SOIN^I^IBIT(20)$
ERROR: code indent should never use tabs
#178: FILE: include/hw/usb/dwc2-regs.h:153:
+#define GINTSTS_OEPINT^I^I^IBIT(19)$
ERROR: code indent should never use tabs
#179: FILE: include/hw/usb/dwc2-regs.h:154:
+#define GINTSTS_IEPINT^I^I^IBIT(18)$
ERROR: code indent should never use tabs
#180: FILE: include/hw/usb/dwc2-regs.h:155:
+#define GINTSTS_EPMIS^I^I^IBIT(17)$
ERROR: code indent should never use tabs
#181: FILE: include/hw/usb/dwc2-regs.h:156:
+#define GINTSTS_RESTOREDONE^I^IBIT(16)$
ERROR: code indent should never use tabs
#182: FILE: include/hw/usb/dwc2-regs.h:157:
+#define GINTSTS_EOPF^I^I^IBIT(15)$
ERROR: code indent should never use tabs
#183: FILE: include/hw/usb/dwc2-regs.h:158:
+#define GINTSTS_ISOUTDROP^I^IBIT(14)$
ERROR: code indent should never use tabs
#184: FILE: include/hw/usb/dwc2-regs.h:159:
+#define GINTSTS_ENUMDONE^I^IBIT(13)$
ERROR: code indent should never use tabs
#185: FILE: include/hw/usb/dwc2-regs.h:160:
+#define GINTSTS_USBRST^I^I^IBIT(12)$
ERROR: code indent should never use tabs
#186: FILE: include/hw/usb/dwc2-regs.h:161:
+#define GINTSTS_USBSUSP^I^I^IBIT(11)$
ERROR: code indent should never use tabs
#187: FILE: include/hw/usb/dwc2-regs.h:162:
+#define GINTSTS_ERLYSUSP^I^IBIT(10)$
ERROR: code indent should never use tabs
#188: FILE: include/hw/usb/dwc2-regs.h:163:
+#define GINTSTS_I2CINT^I^I^IBIT(9)$
ERROR: code indent should never use tabs
#189: FILE: include/hw/usb/dwc2-regs.h:164:
+#define GINTSTS_ULPI_CK_INT^I^IBIT(8)$
ERROR: code indent should never use tabs
#190: FILE: include/hw/usb/dwc2-regs.h:165:
+#define GINTSTS_GOUTNAKEFF^I^IBIT(7)$
ERROR: code indent should never use tabs
#191: FILE: include/hw/usb/dwc2-regs.h:166:
+#define GINTSTS_GINNAKEFF^I^IBIT(6)$
ERROR: code indent should never use tabs
#192: FILE: include/hw/usb/dwc2-regs.h:167:
+#define GINTSTS_NPTXFEMP^I^IBIT(5)$
ERROR: code indent should never use tabs
#193: FILE: include/hw/usb/dwc2-regs.h:168:
+#define GINTSTS_RXFLVL^I^I^IBIT(4)$
ERROR: code indent should never use tabs
#194: FILE: include/hw/usb/dwc2-regs.h:169:
+#define GINTSTS_SOF^I^I^IBIT(3)$
ERROR: code indent should never use tabs
#195: FILE: include/hw/usb/dwc2-regs.h:170:
+#define GINTSTS_OTGINT^I^I^IBIT(2)$
ERROR: code indent should never use tabs
#196: FILE: include/hw/usb/dwc2-regs.h:171:
+#define GINTSTS_MODEMIS^I^I^IBIT(1)$
ERROR: code indent should never use tabs
#197: FILE: include/hw/usb/dwc2-regs.h:172:
+#define GINTSTS_CURMODE_HOST^I^IBIT(0)$
ERROR: code indent should never use tabs
#199: FILE: include/hw/usb/dwc2-regs.h:174:
+#define GRXSTSR^I^I^I^IHSOTG_REG(0x01C)$
ERROR: code indent should never use tabs
#200: FILE: include/hw/usb/dwc2-regs.h:175:
+#define GRXSTSP^I^I^I^IHSOTG_REG(0x020)$
ERROR: code indent should never use tabs
#201: FILE: include/hw/usb/dwc2-regs.h:176:
+#define GRXSTS_FN_MASK^I^I^I(0x7f << 25)$
ERROR: code indent should never use tabs
#202: FILE: include/hw/usb/dwc2-regs.h:177:
+#define GRXSTS_FN_SHIFT^I^I^I25$
ERROR: code indent should never use tabs
#203: FILE: include/hw/usb/dwc2-regs.h:178:
+#define GRXSTS_PKTSTS_MASK^I^I(0xf << 17)$
ERROR: code indent should never use tabs
#204: FILE: include/hw/usb/dwc2-regs.h:179:
+#define GRXSTS_PKTSTS_SHIFT^I^I17$
ERROR: code indent should never use tabs
#205: FILE: include/hw/usb/dwc2-regs.h:180:
+#define GRXSTS_PKTSTS_GLOBALOUTNAK^I1$
ERROR: code indent should never use tabs
#206: FILE: include/hw/usb/dwc2-regs.h:181:
+#define GRXSTS_PKTSTS_OUTRX^I^I2$
ERROR: code indent should never use tabs
#207: FILE: include/hw/usb/dwc2-regs.h:182:
+#define GRXSTS_PKTSTS_HCHIN^I^I2$
ERROR: code indent should never use tabs
#208: FILE: include/hw/usb/dwc2-regs.h:183:
+#define GRXSTS_PKTSTS_OUTDONE^I^I3$
ERROR: code indent should never use tabs
#209: FILE: include/hw/usb/dwc2-regs.h:184:
+#define GRXSTS_PKTSTS_HCHIN_XFER_COMP^I3$
ERROR: code indent should never use tabs
#210: FILE: include/hw/usb/dwc2-regs.h:185:
+#define GRXSTS_PKTSTS_SETUPDONE^I^I4$
ERROR: code indent should never use tabs
#211: FILE: include/hw/usb/dwc2-regs.h:186:
+#define GRXSTS_PKTSTS_DATATOGGLEERR^I5$
ERROR: code indent should never use tabs
#212: FILE: include/hw/usb/dwc2-regs.h:187:
+#define GRXSTS_PKTSTS_SETUPRX^I^I6$
ERROR: code indent should never use tabs
#213: FILE: include/hw/usb/dwc2-regs.h:188:
+#define GRXSTS_PKTSTS_HCHHALTED^I^I7$
ERROR: code indent should never use tabs
#214: FILE: include/hw/usb/dwc2-regs.h:189:
+#define GRXSTS_HCHNUM_MASK^I^I(0xf << 0)$
ERROR: code indent should never use tabs
#215: FILE: include/hw/usb/dwc2-regs.h:190:
+#define GRXSTS_HCHNUM_SHIFT^I^I0$
ERROR: code indent should never use tabs
#216: FILE: include/hw/usb/dwc2-regs.h:191:
+#define GRXSTS_DPID_MASK^I^I(0x3 << 15)$
ERROR: code indent should never use tabs
#217: FILE: include/hw/usb/dwc2-regs.h:192:
+#define GRXSTS_DPID_SHIFT^I^I15$
ERROR: code indent should never use tabs
#218: FILE: include/hw/usb/dwc2-regs.h:193:
+#define GRXSTS_BYTECNT_MASK^I^I(0x7ff << 4)$
ERROR: code indent should never use tabs
#219: FILE: include/hw/usb/dwc2-regs.h:194:
+#define GRXSTS_BYTECNT_SHIFT^I^I4$
ERROR: code indent should never use tabs
#220: FILE: include/hw/usb/dwc2-regs.h:195:
+#define GRXSTS_EPNUM_MASK^I^I(0xf << 0)$
ERROR: code indent should never use tabs
#221: FILE: include/hw/usb/dwc2-regs.h:196:
+#define GRXSTS_EPNUM_SHIFT^I^I0$
ERROR: code indent should never use tabs
#223: FILE: include/hw/usb/dwc2-regs.h:198:
+#define GRXFSIZ^I^I^I^IHSOTG_REG(0x024)$
ERROR: code indent should never use tabs
#224: FILE: include/hw/usb/dwc2-regs.h:199:
+#define GRXFSIZ_DEPTH_MASK^I^I(0xffff << 0)$
ERROR: code indent should never use tabs
#225: FILE: include/hw/usb/dwc2-regs.h:200:
+#define GRXFSIZ_DEPTH_SHIFT^I^I0$
ERROR: code indent should never use tabs
#227: FILE: include/hw/usb/dwc2-regs.h:202:
+#define GNPTXFSIZ^I^I^IHSOTG_REG(0x028)$
ERROR: code indent should never use tabs
#230: FILE: include/hw/usb/dwc2-regs.h:205:
+#define GNPTXSTS^I^I^IHSOTG_REG(0x02C)$
ERROR: code indent should never use tabs
#231: FILE: include/hw/usb/dwc2-regs.h:206:
+#define GNPTXSTS_NP_TXQ_TOP_MASK^I^I(0x7f << 24)$
ERROR: code indent should never use tabs
#232: FILE: include/hw/usb/dwc2-regs.h:207:
+#define GNPTXSTS_NP_TXQ_TOP_SHIFT^I^I24$
ERROR: code indent should never use tabs
#233: FILE: include/hw/usb/dwc2-regs.h:208:
+#define GNPTXSTS_NP_TXQ_SPC_AVAIL_MASK^I^I(0xff << 16)$
ERROR: code indent should never use tabs
#234: FILE: include/hw/usb/dwc2-regs.h:209:
+#define GNPTXSTS_NP_TXQ_SPC_AVAIL_SHIFT^I^I16$
ERROR: code indent should never use tabs
#235: FILE: include/hw/usb/dwc2-regs.h:210:
+#define GNPTXSTS_NP_TXQ_SPC_AVAIL_GET(_v)^I(((_v) >> 16) & 0xff)$
ERROR: code indent should never use tabs
#236: FILE: include/hw/usb/dwc2-regs.h:211:
+#define GNPTXSTS_NP_TXF_SPC_AVAIL_MASK^I^I(0xffff << 0)$
ERROR: code indent should never use tabs
#237: FILE: include/hw/usb/dwc2-regs.h:212:
+#define GNPTXSTS_NP_TXF_SPC_AVAIL_SHIFT^I^I0$
ERROR: code indent should never use tabs
#238: FILE: include/hw/usb/dwc2-regs.h:213:
+#define GNPTXSTS_NP_TXF_SPC_AVAIL_GET(_v)^I(((_v) >> 0) & 0xffff)$
ERROR: code indent should never use tabs
#240: FILE: include/hw/usb/dwc2-regs.h:215:
+#define GI2CCTL^I^I^I^IHSOTG_REG(0x0030)$
ERROR: code indent should never use tabs
#241: FILE: include/hw/usb/dwc2-regs.h:216:
+#define GI2CCTL_BSYDNE^I^I^IBIT(31)$
ERROR: code indent should never use tabs
#242: FILE: include/hw/usb/dwc2-regs.h:217:
+#define GI2CCTL_RW^I^I^IBIT(30)$
ERROR: code indent should never use tabs
#243: FILE: include/hw/usb/dwc2-regs.h:218:
+#define GI2CCTL_I2CDATSE0^I^IBIT(28)$
ERROR: code indent should never use tabs
#244: FILE: include/hw/usb/dwc2-regs.h:219:
+#define GI2CCTL_I2CDEVADDR_MASK^I^I(0x3 << 26)$
ERROR: code indent should never use tabs
#245: FILE: include/hw/usb/dwc2-regs.h:220:
+#define GI2CCTL_I2CDEVADDR_SHIFT^I26$
ERROR: code indent should never use tabs
#246: FILE: include/hw/usb/dwc2-regs.h:221:
+#define GI2CCTL_I2CSUSPCTL^I^IBIT(25)$
ERROR: code indent should never use tabs
#247: FILE: include/hw/usb/dwc2-regs.h:222:
+#define GI2CCTL_ACK^I^I^IBIT(24)$
ERROR: code indent should never use tabs
#248: FILE: include/hw/usb/dwc2-regs.h:223:
+#define GI2CCTL_I2CEN^I^I^IBIT(23)$
ERROR: code indent should never use tabs
#249: FILE: include/hw/usb/dwc2-regs.h:224:
+#define GI2CCTL_ADDR_MASK^I^I(0x7f << 16)$
ERROR: code indent should never use tabs
#250: FILE: include/hw/usb/dwc2-regs.h:225:
+#define GI2CCTL_ADDR_SHIFT^I^I16$
ERROR: code indent should never use tabs
#251: FILE: include/hw/usb/dwc2-regs.h:226:
+#define GI2CCTL_REGADDR_MASK^I^I(0xff << 8)$
ERROR: code indent should never use tabs
#252: FILE: include/hw/usb/dwc2-regs.h:227:
+#define GI2CCTL_REGADDR_SHIFT^I^I8$
ERROR: code indent should never use tabs
#253: FILE: include/hw/usb/dwc2-regs.h:228:
+#define GI2CCTL_RWDATA_MASK^I^I(0xff << 0)$
ERROR: code indent should never use tabs
#254: FILE: include/hw/usb/dwc2-regs.h:229:
+#define GI2CCTL_RWDATA_SHIFT^I^I0$
ERROR: code indent should never use tabs
#256: FILE: include/hw/usb/dwc2-regs.h:231:
+#define GPVNDCTL^I^I^IHSOTG_REG(0x0034)$
ERROR: code indent should never use tabs
#257: FILE: include/hw/usb/dwc2-regs.h:232:
+#define GGPIO^I^I^I^IHSOTG_REG(0x0038)$
ERROR: code indent should never use tabs
#258: FILE: include/hw/usb/dwc2-regs.h:233:
+#define GGPIO_STM32_OTG_GCCFG_PWRDWN^IBIT(16)$
ERROR: code indent should never use tabs
#260: FILE: include/hw/usb/dwc2-regs.h:235:
+#define GUID^I^I^I^IHSOTG_REG(0x003c)$
ERROR: code indent should never use tabs
#261: FILE: include/hw/usb/dwc2-regs.h:236:
+#define GSNPSID^I^I^I^IHSOTG_REG(0x0040)$
ERROR: code indent should never use tabs
#262: FILE: include/hw/usb/dwc2-regs.h:237:
+#define GHWCFG1^I^I^I^IHSOTG_REG(0x0044)$
ERROR: code indent should never use tabs
#263: FILE: include/hw/usb/dwc2-regs.h:238:
+#define GSNPSID_ID_MASK^I^I^IGENMASK(31, 16)$
ERROR: code indent should never use tabs
#265: FILE: include/hw/usb/dwc2-regs.h:240:
+#define GHWCFG2^I^I^I^IHSOTG_REG(0x0048)$
ERROR: code indent should never use tabs
#266: FILE: include/hw/usb/dwc2-regs.h:241:
+#define GHWCFG2_OTG_ENABLE_IC_USB^I^IBIT(31)$
ERROR: code indent should never use tabs
#267: FILE: include/hw/usb/dwc2-regs.h:242:
+#define GHWCFG2_DEV_TOKEN_Q_DEPTH_MASK^I^I(0x1f << 26)$
ERROR: code indent should never use tabs
#268: FILE: include/hw/usb/dwc2-regs.h:243:
+#define GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT^I^I26$
ERROR: code indent should never use tabs
#269: FILE: include/hw/usb/dwc2-regs.h:244:
+#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK^I(0x3 << 24)$
ERROR: code indent should never use tabs
#270: FILE: include/hw/usb/dwc2-regs.h:245:
+#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT^I24$
ERROR: code indent should never use tabs
#271: FILE: include/hw/usb/dwc2-regs.h:246:
+#define GHWCFG2_NONPERIO_TX_Q_DEPTH_MASK^I(0x3 << 22)$
ERROR: code indent should never use tabs
#272: FILE: include/hw/usb/dwc2-regs.h:247:
+#define GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT^I22$
ERROR: code indent should never use tabs
#273: FILE: include/hw/usb/dwc2-regs.h:248:
+#define GHWCFG2_MULTI_PROC_INT^I^I^IBIT(20)$
ERROR: code indent should never use tabs
#274: FILE: include/hw/usb/dwc2-regs.h:249:
+#define GHWCFG2_DYNAMIC_FIFO^I^I^IBIT(19)$
ERROR: code indent should never use tabs
#275: FILE: include/hw/usb/dwc2-regs.h:250:
+#define GHWCFG2_PERIO_EP_SUPPORTED^I^IBIT(18)$
ERROR: code indent should never use tabs
#276: FILE: include/hw/usb/dwc2-regs.h:251:
+#define GHWCFG2_NUM_HOST_CHAN_MASK^I^I(0xf << 14)$
ERROR: code indent should never use tabs
#277: FILE: include/hw/usb/dwc2-regs.h:252:
+#define GHWCFG2_NUM_HOST_CHAN_SHIFT^I^I14$
ERROR: code indent should never use tabs
#278: FILE: include/hw/usb/dwc2-regs.h:253:
+#define GHWCFG2_NUM_DEV_EP_MASK^I^I^I(0xf << 10)$
ERROR: code indent should never use tabs
#279: FILE: include/hw/usb/dwc2-regs.h:254:
+#define GHWCFG2_NUM_DEV_EP_SHIFT^I^I10$
ERROR: code indent should never use tabs
#280: FILE: include/hw/usb/dwc2-regs.h:255:
+#define GHWCFG2_FS_PHY_TYPE_MASK^I^I(0x3 << 8)$
ERROR: code indent should never use tabs
#281: FILE: include/hw/usb/dwc2-regs.h:256:
+#define GHWCFG2_FS_PHY_TYPE_SHIFT^I^I8$
ERROR: code indent should never use tabs
#282: FILE: include/hw/usb/dwc2-regs.h:257:
+#define GHWCFG2_FS_PHY_TYPE_NOT_SUPPORTED^I0$
ERROR: code indent should never use tabs
#283: FILE: include/hw/usb/dwc2-regs.h:258:
+#define GHWCFG2_FS_PHY_TYPE_DEDICATED^I^I1$
ERROR: code indent should never use tabs
#284: FILE: include/hw/usb/dwc2-regs.h:259:
+#define GHWCFG2_FS_PHY_TYPE_SHARED_UTMI^I^I2$
ERROR: code indent should never use tabs
#285: FILE: include/hw/usb/dwc2-regs.h:260:
+#define GHWCFG2_FS_PHY_TYPE_SHARED_ULPI^I^I3$
ERROR: code indent should never use tabs
#286: FILE: include/hw/usb/dwc2-regs.h:261:
+#define GHWCFG2_HS_PHY_TYPE_MASK^I^I(0x3 << 6)$
ERROR: code indent should never use tabs
#287: FILE: include/hw/usb/dwc2-regs.h:262:
+#define GHWCFG2_HS_PHY_TYPE_SHIFT^I^I6$
ERROR: code indent should never use tabs
#288: FILE: include/hw/usb/dwc2-regs.h:263:
+#define GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED^I0$
ERROR: code indent should never use tabs
#289: FILE: include/hw/usb/dwc2-regs.h:264:
+#define GHWCFG2_HS_PHY_TYPE_UTMI^I^I1$
ERROR: code indent should never use tabs
#290: FILE: include/hw/usb/dwc2-regs.h:265:
+#define GHWCFG2_HS_PHY_TYPE_ULPI^I^I2$
ERROR: code indent should never use tabs
#291: FILE: include/hw/usb/dwc2-regs.h:266:
+#define GHWCFG2_HS_PHY_TYPE_UTMI_ULPI^I^I3$
ERROR: code indent should never use tabs
#292: FILE: include/hw/usb/dwc2-regs.h:267:
+#define GHWCFG2_POINT2POINT^I^I^IBIT(5)$
ERROR: code indent should never use tabs
#293: FILE: include/hw/usb/dwc2-regs.h:268:
+#define GHWCFG2_ARCHITECTURE_MASK^I^I(0x3 << 3)$
ERROR: code indent should never use tabs
#294: FILE: include/hw/usb/dwc2-regs.h:269:
+#define GHWCFG2_ARCHITECTURE_SHIFT^I^I3$
ERROR: code indent should never use tabs
#295: FILE: include/hw/usb/dwc2-regs.h:270:
+#define GHWCFG2_SLAVE_ONLY_ARCH^I^I^I0$
ERROR: code indent should never use tabs
#296: FILE: include/hw/usb/dwc2-regs.h:271:
+#define GHWCFG2_EXT_DMA_ARCH^I^I^I1$
ERROR: code indent should never use tabs
#297: FILE: include/hw/usb/dwc2-regs.h:272:
+#define GHWCFG2_INT_DMA_ARCH^I^I^I2$
ERROR: code indent should never use tabs
#298: FILE: include/hw/usb/dwc2-regs.h:273:
+#define GHWCFG2_OP_MODE_MASK^I^I^I(0x7 << 0)$
ERROR: code indent should never use tabs
#299: FILE: include/hw/usb/dwc2-regs.h:274:
+#define GHWCFG2_OP_MODE_SHIFT^I^I^I0$
ERROR: code indent should never use tabs
#300: FILE: include/hw/usb/dwc2-regs.h:275:
+#define GHWCFG2_OP_MODE_HNP_SRP_CAPABLE^I^I0$
ERROR: code indent should never use tabs
#301: FILE: include/hw/usb/dwc2-regs.h:276:
+#define GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE^I1$
ERROR: code indent should never use tabs
#302: FILE: include/hw/usb/dwc2-regs.h:277:
+#define GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE^I2$
ERROR: code indent should never use tabs
#303: FILE: include/hw/usb/dwc2-regs.h:278:
+#define GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE^I3$
ERROR: code indent should never use tabs
#304: FILE: include/hw/usb/dwc2-regs.h:279:
+#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE^I4$
ERROR: code indent should never use tabs
#305: FILE: include/hw/usb/dwc2-regs.h:280:
+#define GHWCFG2_OP_MODE_SRP_CAPABLE_HOST^I5$
ERROR: code indent should never use tabs
#306: FILE: include/hw/usb/dwc2-regs.h:281:
+#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST^I6$
ERROR: code indent should never use tabs
#307: FILE: include/hw/usb/dwc2-regs.h:282:
+#define GHWCFG2_OP_MODE_UNDEFINED^I^I7$
ERROR: code indent should never use tabs
#309: FILE: include/hw/usb/dwc2-regs.h:284:
+#define GHWCFG3^I^I^I^IHSOTG_REG(0x004c)$
ERROR: code indent should never use tabs
#310: FILE: include/hw/usb/dwc2-regs.h:285:
+#define GHWCFG3_DFIFO_DEPTH_MASK^I^I(0xffff << 16)$
ERROR: code indent should never use tabs
#311: FILE: include/hw/usb/dwc2-regs.h:286:
+#define GHWCFG3_DFIFO_DEPTH_SHIFT^I^I16$
ERROR: code indent should never use tabs
#312: FILE: include/hw/usb/dwc2-regs.h:287:
+#define GHWCFG3_OTG_LPM_EN^I^I^IBIT(15)$
ERROR: code indent should never use tabs
#313: FILE: include/hw/usb/dwc2-regs.h:288:
+#define GHWCFG3_BC_SUPPORT^I^I^IBIT(14)$
ERROR: code indent should never use tabs
#314: FILE: include/hw/usb/dwc2-regs.h:289:
+#define GHWCFG3_OTG_ENABLE_HSIC^I^I^IBIT(13)$
ERROR: code indent should never use tabs
#315: FILE: include/hw/usb/dwc2-regs.h:290:
+#define GHWCFG3_ADP_SUPP^I^I^IBIT(12)$
ERROR: code indent should never use tabs
#316: FILE: include/hw/usb/dwc2-regs.h:291:
+#define GHWCFG3_SYNCH_RESET_TYPE^I^IBIT(11)$
ERROR: code indent should never use tabs
#317: FILE: include/hw/usb/dwc2-regs.h:292:
+#define GHWCFG3_OPTIONAL_FEATURES^I^IBIT(10)$
ERROR: code indent should never use tabs
#318: FILE: include/hw/usb/dwc2-regs.h:293:
+#define GHWCFG3_VENDOR_CTRL_IF^I^I^IBIT(9)$
ERROR: code indent should never use tabs
#319: FILE: include/hw/usb/dwc2-regs.h:294:
+#define GHWCFG3_I2C^I^I^I^IBIT(8)$
ERROR: code indent should never use tabs
#320: FILE: include/hw/usb/dwc2-regs.h:295:
+#define GHWCFG3_OTG_FUNC^I^I^IBIT(7)$
ERROR: code indent should never use tabs
#321: FILE: include/hw/usb/dwc2-regs.h:296:
+#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK^I(0x7 << 4)$
ERROR: code indent should never use tabs
#322: FILE: include/hw/usb/dwc2-regs.h:297:
+#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT^I4$
ERROR: code indent should never use tabs
#323: FILE: include/hw/usb/dwc2-regs.h:298:
+#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_MASK^I(0xf << 0)$
ERROR: code indent should never use tabs
#324: FILE: include/hw/usb/dwc2-regs.h:299:
+#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT^I0$
ERROR: code indent should never use tabs
#326: FILE: include/hw/usb/dwc2-regs.h:301:
+#define GHWCFG4^I^I^I^IHSOTG_REG(0x0050)$
ERROR: code indent should never use tabs
#327: FILE: include/hw/usb/dwc2-regs.h:302:
+#define GHWCFG4_DESC_DMA_DYN^I^I^IBIT(31)$
ERROR: code indent should never use tabs
#328: FILE: include/hw/usb/dwc2-regs.h:303:
+#define GHWCFG4_DESC_DMA^I^I^IBIT(30)$
ERROR: code indent should never use tabs
#329: FILE: include/hw/usb/dwc2-regs.h:304:
+#define GHWCFG4_NUM_IN_EPS_MASK^I^I^I(0xf << 26)$
ERROR: code indent should never use tabs
#330: FILE: include/hw/usb/dwc2-regs.h:305:
+#define GHWCFG4_NUM_IN_EPS_SHIFT^I^I26$
ERROR: code indent should never use tabs
#331: FILE: include/hw/usb/dwc2-regs.h:306:
+#define GHWCFG4_DED_FIFO_EN^I^I^IBIT(25)$
ERROR: code indent should never use tabs
#332: FILE: include/hw/usb/dwc2-regs.h:307:
+#define GHWCFG4_DED_FIFO_SHIFT^I^I25$
ERROR: code indent should never use tabs
#333: FILE: include/hw/usb/dwc2-regs.h:308:
+#define GHWCFG4_SESSION_END_FILT_EN^I^IBIT(24)$
ERROR: code indent should never use tabs
#334: FILE: include/hw/usb/dwc2-regs.h:309:
+#define GHWCFG4_B_VALID_FILT_EN^I^I^IBIT(23)$
ERROR: code indent should never use tabs
#335: FILE: include/hw/usb/dwc2-regs.h:310:
+#define GHWCFG4_A_VALID_FILT_EN^I^I^IBIT(22)$
ERROR: code indent should never use tabs
#336: FILE: include/hw/usb/dwc2-regs.h:311:
+#define GHWCFG4_VBUS_VALID_FILT_EN^I^IBIT(21)$
ERROR: code indent should never use tabs
#337: FILE: include/hw/usb/dwc2-regs.h:312:
+#define GHWCFG4_IDDIG_FILT_EN^I^I^IBIT(20)$
ERROR: code indent should never use tabs
#338: FILE: include/hw/usb/dwc2-regs.h:313:
+#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_MASK^I(0xf << 16)$
ERROR: code indent should never use tabs
#339: FILE: include/hw/usb/dwc2-regs.h:314:
+#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_SHIFT^I16$
ERROR: code indent should never use tabs
#340: FILE: include/hw/usb/dwc2-regs.h:315:
+#define GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK^I(0x3 << 14)$
ERROR: code indent should never use tabs
#341: FILE: include/hw/usb/dwc2-regs.h:316:
+#define GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT^I14$
ERROR: code indent should never use tabs
#342: FILE: include/hw/usb/dwc2-regs.h:317:
+#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8^I^I0$
ERROR: code indent should never use tabs
#343: FILE: include/hw/usb/dwc2-regs.h:318:
+#define GHWCFG4_UTMI_PHY_DATA_WIDTH_16^I^I1$
ERROR: code indent should never use tabs
#344: FILE: include/hw/usb/dwc2-regs.h:319:
+#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8_OR_16^I2$
ERROR: code indent should never use tabs
#345: FILE: include/hw/usb/dwc2-regs.h:320:
+#define GHWCFG4_ACG_SUPPORTED^I^I^IBIT(12)$
ERROR: code indent should never use tabs
#346: FILE: include/hw/usb/dwc2-regs.h:321:
+#define GHWCFG4_IPG_ISOC_SUPPORTED^I^IBIT(11)$
ERROR: code indent should never use tabs
#348: FILE: include/hw/usb/dwc2-regs.h:323:
+#define GHWCFG4_XHIBER^I^I^I^IBIT(7)$
ERROR: code indent should never use tabs
#349: FILE: include/hw/usb/dwc2-regs.h:324:
+#define GHWCFG4_HIBER^I^I^I^IBIT(6)$
ERROR: code indent should never use tabs
#350: FILE: include/hw/usb/dwc2-regs.h:325:
+#define GHWCFG4_MIN_AHB_FREQ^I^I^IBIT(5)$
ERROR: code indent should never use tabs
#351: FILE: include/hw/usb/dwc2-regs.h:326:
+#define GHWCFG4_POWER_OPTIMIZ^I^I^IBIT(4)$
ERROR: code indent should never use tabs
#352: FILE: include/hw/usb/dwc2-regs.h:327:
+#define GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK^I(0xf << 0)$
ERROR: code indent should never use tabs
#353: FILE: include/hw/usb/dwc2-regs.h:328:
+#define GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT^I0$
ERROR: code indent should never use tabs
#355: FILE: include/hw/usb/dwc2-regs.h:330:
+#define GLPMCFG^I^I^I^IHSOTG_REG(0x0054)$
ERROR: code indent should never use tabs
#356: FILE: include/hw/usb/dwc2-regs.h:331:
+#define GLPMCFG_INVSELHSIC^I^IBIT(31)$
ERROR: code indent should never use tabs
#357: FILE: include/hw/usb/dwc2-regs.h:332:
+#define GLPMCFG_HSICCON^I^I^IBIT(30)$
ERROR: code indent should never use tabs
#358: FILE: include/hw/usb/dwc2-regs.h:333:
+#define GLPMCFG_RSTRSLPSTS^I^IBIT(29)$
ERROR: code indent should never use tabs
#359: FILE: include/hw/usb/dwc2-regs.h:334:
+#define GLPMCFG_ENBESL^I^I^IBIT(28)$
ERROR: code indent should never use tabs
#360: FILE: include/hw/usb/dwc2-regs.h:335:
+#define GLPMCFG_LPM_RETRYCNT_STS_MASK^I(0x7 << 25)$
ERROR: code indent should never use tabs
#361: FILE: include/hw/usb/dwc2-regs.h:336:
+#define GLPMCFG_LPM_RETRYCNT_STS_SHIFT^I25$
ERROR: code indent should never use tabs
#362: FILE: include/hw/usb/dwc2-regs.h:337:
+#define GLPMCFG_SNDLPM^I^I^IBIT(24)$
ERROR: code indent should never use tabs
#363: FILE: include/hw/usb/dwc2-regs.h:338:
+#define GLPMCFG_RETRY_CNT_MASK^I^I(0x7 << 21)$
ERROR: code indent should never use tabs
#364: FILE: include/hw/usb/dwc2-regs.h:339:
+#define GLPMCFG_RETRY_CNT_SHIFT^I^I21$
ERROR: code indent should never use tabs
#365: FILE: include/hw/usb/dwc2-regs.h:340:
+#define GLPMCFG_LPM_REJECT_CTRL_CONTROL^IBIT(21)$
ERROR: code indent should never use tabs
#366: FILE: include/hw/usb/dwc2-regs.h:341:
+#define GLPMCFG_LPM_ACCEPT_CTRL_ISOC^IBIT(22)$
ERROR: code indent should never use tabs
#367: FILE: include/hw/usb/dwc2-regs.h:342:
+#define GLPMCFG_LPM_CHNL_INDX_MASK^I(0xf << 17)$
ERROR: code indent should never use tabs
#368: FILE: include/hw/usb/dwc2-regs.h:343:
+#define GLPMCFG_LPM_CHNL_INDX_SHIFT^I17$
ERROR: code indent should never use tabs
#369: FILE: include/hw/usb/dwc2-regs.h:344:
+#define GLPMCFG_L1RESUMEOK^I^IBIT(16)$
ERROR: code indent should never use tabs
#370: FILE: include/hw/usb/dwc2-regs.h:345:
+#define GLPMCFG_SLPSTS^I^I^IBIT(15)$
ERROR: code indent should never use tabs
#371: FILE: include/hw/usb/dwc2-regs.h:346:
+#define GLPMCFG_COREL1RES_MASK^I^I(0x3 << 13)$
ERROR: code indent should never use tabs
#372: FILE: include/hw/usb/dwc2-regs.h:347:
+#define GLPMCFG_COREL1RES_SHIFT^I^I13$
ERROR: code indent should never use tabs
#373: FILE: include/hw/usb/dwc2-regs.h:348:
+#define GLPMCFG_HIRD_THRES_MASK^I^I(0x1f << 8)$
ERROR: code indent should never use tabs
#374: FILE: include/hw/usb/dwc2-regs.h:349:
+#define GLPMCFG_HIRD_THRES_SHIFT^I8$
ERROR: code indent should never use tabs
#375: FILE: include/hw/usb/dwc2-regs.h:350:
+#define GLPMCFG_HIRD_THRES_EN^I^I(0x10 << 8)$
ERROR: code indent should never use tabs
#376: FILE: include/hw/usb/dwc2-regs.h:351:
+#define GLPMCFG_ENBLSLPM^I^IBIT(7)$
ERROR: code indent should never use tabs
#377: FILE: include/hw/usb/dwc2-regs.h:352:
+#define GLPMCFG_BREMOTEWAKE^I^IBIT(6)$
ERROR: code indent should never use tabs
#378: FILE: include/hw/usb/dwc2-regs.h:353:
+#define GLPMCFG_HIRD_MASK^I^I(0xf << 2)$
ERROR: code indent should never use tabs
#379: FILE: include/hw/usb/dwc2-regs.h:354:
+#define GLPMCFG_HIRD_SHIFT^I^I2$
ERROR: code indent should never use tabs
#380: FILE: include/hw/usb/dwc2-regs.h:355:
+#define GLPMCFG_APPL1RES^I^IBIT(1)$
ERROR: code indent should never use tabs
#381: FILE: include/hw/usb/dwc2-regs.h:356:
+#define GLPMCFG_LPMCAP^I^I^IBIT(0)$
ERROR: code indent should never use tabs
#383: FILE: include/hw/usb/dwc2-regs.h:358:
+#define GPWRDN^I^I^I^IHSOTG_REG(0x0058)$
ERROR: code indent should never use tabs
#384: FILE: include/hw/usb/dwc2-regs.h:359:
+#define GPWRDN_MULT_VAL_ID_BC_MASK^I(0x1f << 24)$
ERROR: code indent should never use tabs
#385: FILE: include/hw/usb/dwc2-regs.h:360:
+#define GPWRDN_MULT_VAL_ID_BC_SHIFT^I24$
ERROR: code indent should never use tabs
#386: FILE: include/hw/usb/dwc2-regs.h:361:
+#define GPWRDN_ADP_INT^I^I^IBIT(23)$
ERROR: code indent should never use tabs
#387: FILE: include/hw/usb/dwc2-regs.h:362:
+#define GPWRDN_BSESSVLD^I^I^IBIT(22)$
ERROR: code indent should never use tabs
#388: FILE: include/hw/usb/dwc2-regs.h:363:
+#define GPWRDN_IDSTS^I^I^IBIT(21)$
ERROR: code indent should never use tabs
#389: FILE: include/hw/usb/dwc2-regs.h:364:
+#define GPWRDN_LINESTATE_MASK^I^I(0x3 << 19)$
ERROR: code indent should never use tabs
#390: FILE: include/hw/usb/dwc2-regs.h:365:
+#define GPWRDN_LINESTATE_SHIFT^I^I19$
ERROR: code indent should never use tabs
#391: FILE: include/hw/usb/dwc2-regs.h:366:
+#define GPWRDN_STS_CHGINT_MSK^I^IBIT(18)$
ERROR: code indent should never use tabs
#392: FILE: include/hw/usb/dwc2-regs.h:367:
+#define GPWRDN_STS_CHGINT^I^IBIT(17)$
ERROR: code indent should never use tabs
#393: FILE: include/hw/usb/dwc2-regs.h:368:
+#define GPWRDN_SRP_DET_MSK^I^IBIT(16)$
ERROR: code indent should never use tabs
#394: FILE: include/hw/usb/dwc2-regs.h:369:
+#define GPWRDN_SRP_DET^I^I^IBIT(15)$
ERROR: code indent should never use tabs
#395: FILE: include/hw/usb/dwc2-regs.h:370:
+#define GPWRDN_CONNECT_DET_MSK^I^IBIT(14)$
ERROR: code indent should never use tabs
#396: FILE: include/hw/usb/dwc2-regs.h:371:
+#define GPWRDN_CONNECT_DET^I^IBIT(13)$
ERROR: code indent should never use tabs
#397: FILE: include/hw/usb/dwc2-regs.h:372:
+#define GPWRDN_DISCONN_DET_MSK^I^IBIT(12)$
ERROR: code indent should never use tabs
#398: FILE: include/hw/usb/dwc2-regs.h:373:
+#define GPWRDN_DISCONN_DET^I^IBIT(11)$
ERROR: code indent should never use tabs
#399: FILE: include/hw/usb/dwc2-regs.h:374:
+#define GPWRDN_RST_DET_MSK^I^IBIT(10)$
ERROR: code indent should never use tabs
#400: FILE: include/hw/usb/dwc2-regs.h:375:
+#define GPWRDN_RST_DET^I^I^IBIT(9)$
ERROR: code indent should never use tabs
#401: FILE: include/hw/usb/dwc2-regs.h:376:
+#define GPWRDN_LNSTSCHG_MSK^I^IBIT(8)$
ERROR: code indent should never use tabs
#402: FILE: include/hw/usb/dwc2-regs.h:377:
+#define GPWRDN_LNSTSCHG^I^I^IBIT(7)$
ERROR: code indent should never use tabs
#403: FILE: include/hw/usb/dwc2-regs.h:378:
+#define GPWRDN_DIS_VBUS^I^I^IBIT(6)$
ERROR: code indent should never use tabs
#404: FILE: include/hw/usb/dwc2-regs.h:379:
+#define GPWRDN_PWRDNSWTCH^I^IBIT(5)$
ERROR: code indent should never use tabs
#405: FILE: include/hw/usb/dwc2-regs.h:380:
+#define GPWRDN_PWRDNRSTN^I^IBIT(4)$
ERROR: code indent should never use tabs
#406: FILE: include/hw/usb/dwc2-regs.h:381:
+#define GPWRDN_PWRDNCLMP^I^IBIT(3)$
ERROR: code indent should never use tabs
#407: FILE: include/hw/usb/dwc2-regs.h:382:
+#define GPWRDN_RESTORE^I^I^IBIT(2)$
ERROR: code indent should never use tabs
#408: FILE: include/hw/usb/dwc2-regs.h:383:
+#define GPWRDN_PMUACTV^I^I^IBIT(1)$
ERROR: code indent should never use tabs
#409: FILE: include/hw/usb/dwc2-regs.h:384:
+#define GPWRDN_PMUINTSEL^I^IBIT(0)$
ERROR: code indent should never use tabs
#411: FILE: include/hw/usb/dwc2-regs.h:386:
+#define GDFIFOCFG^I^I^IHSOTG_REG(0x005c)$
ERROR: code indent should never use tabs
#412: FILE: include/hw/usb/dwc2-regs.h:387:
+#define GDFIFOCFG_EPINFOBASE_MASK^I(0xffff << 16)$
ERROR: code indent should never use tabs
#413: FILE: include/hw/usb/dwc2-regs.h:388:
+#define GDFIFOCFG_EPINFOBASE_SHIFT^I16$
ERROR: code indent should never use tabs
#414: FILE: include/hw/usb/dwc2-regs.h:389:
+#define GDFIFOCFG_GDFIFOCFG_MASK^I(0xffff << 0)$
ERROR: code indent should never use tabs
#415: FILE: include/hw/usb/dwc2-regs.h:390:
+#define GDFIFOCFG_GDFIFOCFG_SHIFT^I0$
ERROR: code indent should never use tabs
#417: FILE: include/hw/usb/dwc2-regs.h:392:
+#define ADPCTL^I^I^I^IHSOTG_REG(0x0060)$
ERROR: code indent should never use tabs
#418: FILE: include/hw/usb/dwc2-regs.h:393:
+#define ADPCTL_AR_MASK^I^I^I(0x3 << 27)$
ERROR: code indent should never use tabs
#419: FILE: include/hw/usb/dwc2-regs.h:394:
+#define ADPCTL_AR_SHIFT^I^I^I27$
ERROR: code indent should never use tabs
#420: FILE: include/hw/usb/dwc2-regs.h:395:
+#define ADPCTL_ADP_TMOUT_INT_MSK^IBIT(26)$
ERROR: code indent should never use tabs
#421: FILE: include/hw/usb/dwc2-regs.h:396:
+#define ADPCTL_ADP_SNS_INT_MSK^I^IBIT(25)$
ERROR: code indent should never use tabs
#422: FILE: include/hw/usb/dwc2-regs.h:397:
+#define ADPCTL_ADP_PRB_INT_MSK^I^IBIT(24)$
ERROR: code indent should never use tabs
#423: FILE: include/hw/usb/dwc2-regs.h:398:
+#define ADPCTL_ADP_TMOUT_INT^I^IBIT(23)$
ERROR: code indent should never use tabs
#424: FILE: include/hw/usb/dwc2-regs.h:399:
+#define ADPCTL_ADP_SNS_INT^I^IBIT(22)$
ERROR: code indent should never use tabs
#425: FILE: include/hw/usb/dwc2-regs.h:400:
+#define ADPCTL_ADP_PRB_INT^I^IBIT(21)$
ERROR: code indent should never use tabs
#426: FILE: include/hw/usb/dwc2-regs.h:401:
+#define ADPCTL_ADPENA^I^I^IBIT(20)$
ERROR: code indent should never use tabs
#427: FILE: include/hw/usb/dwc2-regs.h:402:
+#define ADPCTL_ADPRES^I^I^IBIT(19)$
ERROR: code indent should never use tabs
#428: FILE: include/hw/usb/dwc2-regs.h:403:
+#define ADPCTL_ENASNS^I^I^IBIT(18)$
ERROR: code indent should never use tabs
#429: FILE: include/hw/usb/dwc2-regs.h:404:
+#define ADPCTL_ENAPRB^I^I^IBIT(17)$
ERROR: code indent should never use tabs
#430: FILE: include/hw/usb/dwc2-regs.h:405:
+#define ADPCTL_RTIM_MASK^I^I(0x7ff << 6)$
ERROR: code indent should never use tabs
#431: FILE: include/hw/usb/dwc2-regs.h:406:
+#define ADPCTL_RTIM_SHIFT^I^I6$
ERROR: code indent should never use tabs
#432: FILE: include/hw/usb/dwc2-regs.h:407:
+#define ADPCTL_PRB_PER_MASK^I^I(0x3 << 4)$
ERROR: code indent should never use tabs
#433: FILE: include/hw/usb/dwc2-regs.h:408:
+#define ADPCTL_PRB_PER_SHIFT^I^I4$
ERROR: code indent should never use tabs
#434: FILE: include/hw/usb/dwc2-regs.h:409:
+#define ADPCTL_PRB_DELTA_MASK^I^I(0x3 << 2)$
ERROR: code indent should never use tabs
#435: FILE: include/hw/usb/dwc2-regs.h:410:
+#define ADPCTL_PRB_DELTA_SHIFT^I^I2$
ERROR: code indent should never use tabs
#436: FILE: include/hw/usb/dwc2-regs.h:411:
+#define ADPCTL_PRB_DSCHRG_MASK^I^I(0x3 << 0)$
ERROR: code indent should never use tabs
#437: FILE: include/hw/usb/dwc2-regs.h:412:
+#define ADPCTL_PRB_DSCHRG_SHIFT^I^I0$
ERROR: code indent should never use tabs
#439: FILE: include/hw/usb/dwc2-regs.h:414:
+#define GREFCLK^I^I^I^I HSOTG_REG(0x0064)$
ERROR: code indent should never use tabs
#440: FILE: include/hw/usb/dwc2-regs.h:415:
+#define GREFCLK_REFCLKPER_MASK^I^I (0x1ffff << 15)$
ERROR: code indent should never use tabs
#441: FILE: include/hw/usb/dwc2-regs.h:416:
+#define GREFCLK_REFCLKPER_SHIFT^I^I 15$
ERROR: code indent should never use tabs
#442: FILE: include/hw/usb/dwc2-regs.h:417:
+#define GREFCLK_REF_CLK_MODE^I^I BIT(14)$
ERROR: code indent should never use tabs
#443: FILE: include/hw/usb/dwc2-regs.h:418:
+#define GREFCLK_SOF_CNT_WKUP_ALERT_MASK^I (0x3ff)$
ERROR: code indent should never use tabs
#446: FILE: include/hw/usb/dwc2-regs.h:421:
+#define GINTMSK2^I^I^IHSOTG_REG(0x0068)$
ERROR: code indent should never use tabs
#447: FILE: include/hw/usb/dwc2-regs.h:422:
+#define GINTMSK2_WKUP_ALERT_INT_MSK^IBIT(0)$
ERROR: code indent should never use tabs
#449: FILE: include/hw/usb/dwc2-regs.h:424:
+#define GINTSTS2^I^I^IHSOTG_REG(0x006c)$
ERROR: code indent should never use tabs
#450: FILE: include/hw/usb/dwc2-regs.h:425:
+#define GINTSTS2_WKUP_ALERT_INT^I^IBIT(0)$
ERROR: code indent should never use tabs
#452: FILE: include/hw/usb/dwc2-regs.h:427:
+#define HPTXFSIZ^I^I^IHSOTG_REG(0x100)$
ERROR: code indent should never use tabs
#455: FILE: include/hw/usb/dwc2-regs.h:430:
+#define DPTXFSIZN(_a)^I^I^IHSOTG_REG(0x104 + (((_a) - 1) * 4))$
ERROR: code indent should never use tabs
#459: FILE: include/hw/usb/dwc2-regs.h:434:
+#define FIFOSIZE_DEPTH_MASK^I^I(0xffff << 16)$
ERROR: code indent should never use tabs
#460: FILE: include/hw/usb/dwc2-regs.h:435:
+#define FIFOSIZE_DEPTH_SHIFT^I^I16$
ERROR: code indent should never use tabs
#461: FILE: include/hw/usb/dwc2-regs.h:436:
+#define FIFOSIZE_STARTADDR_MASK^I^I(0xffff << 0)$
ERROR: code indent should never use tabs
#462: FILE: include/hw/usb/dwc2-regs.h:437:
+#define FIFOSIZE_STARTADDR_SHIFT^I0$
ERROR: code indent should never use tabs
#463: FILE: include/hw/usb/dwc2-regs.h:438:
+#define FIFOSIZE_DEPTH_GET(_x)^I^I(((_x) >> 16) & 0xffff)$
ERROR: code indent should never use tabs
#467: FILE: include/hw/usb/dwc2-regs.h:442:
+#define DCFG^I^I^I^IHSOTG_REG(0x800)$
ERROR: code indent should never use tabs
#468: FILE: include/hw/usb/dwc2-regs.h:443:
+#define DCFG_DESCDMA_EN^I^I^IBIT(23)$
ERROR: code indent should never use tabs
#469: FILE: include/hw/usb/dwc2-regs.h:444:
+#define DCFG_EPMISCNT_MASK^I^I(0x1f << 18)$
ERROR: code indent should never use tabs
#470: FILE: include/hw/usb/dwc2-regs.h:445:
+#define DCFG_EPMISCNT_SHIFT^I^I18$
ERROR: code indent should never use tabs
#471: FILE: include/hw/usb/dwc2-regs.h:446:
+#define DCFG_EPMISCNT_LIMIT^I^I0x1f$
ERROR: code indent should never use tabs
#472: FILE: include/hw/usb/dwc2-regs.h:447:
+#define DCFG_EPMISCNT(_x)^I^I((_x) << 18)$
ERROR: code indent should never use tabs
#473: FILE: include/hw/usb/dwc2-regs.h:448:
+#define DCFG_IPG_ISOC_SUPPORDED^I^IBIT(17)$
ERROR: code indent should never use tabs
#474: FILE: include/hw/usb/dwc2-regs.h:449:
+#define DCFG_PERFRINT_MASK^I^I(0x3 << 11)$
ERROR: code indent should never use tabs
#475: FILE: include/hw/usb/dwc2-regs.h:450:
+#define DCFG_PERFRINT_SHIFT^I^I11$
ERROR: code indent should never use tabs
#476: FILE: include/hw/usb/dwc2-regs.h:451:
+#define DCFG_PERFRINT_LIMIT^I^I0x3$
ERROR: code indent should never use tabs
#477: FILE: include/hw/usb/dwc2-regs.h:452:
+#define DCFG_PERFRINT(_x)^I^I((_x) << 11)$
ERROR: code indent should never use tabs
#478: FILE: include/hw/usb/dwc2-regs.h:453:
+#define DCFG_DEVADDR_MASK^I^I(0x7f << 4)$
ERROR: code indent should never use tabs
#479: FILE: include/hw/usb/dwc2-regs.h:454:
+#define DCFG_DEVADDR_SHIFT^I^I4$
ERROR: code indent should never use tabs
#480: FILE: include/hw/usb/dwc2-regs.h:455:
+#define DCFG_DEVADDR_LIMIT^I^I0x7f$
ERROR: code indent should never use tabs
#481: FILE: include/hw/usb/dwc2-regs.h:456:
+#define DCFG_DEVADDR(_x)^I^I((_x) << 4)$
ERROR: code indent should never use tabs
#482: FILE: include/hw/usb/dwc2-regs.h:457:
+#define DCFG_NZ_STS_OUT_HSHK^I^IBIT(2)$
ERROR: code indent should never use tabs
#483: FILE: include/hw/usb/dwc2-regs.h:458:
+#define DCFG_DEVSPD_MASK^I^I(0x3 << 0)$
ERROR: code indent should never use tabs
#484: FILE: include/hw/usb/dwc2-regs.h:459:
+#define DCFG_DEVSPD_SHIFT^I^I0$
ERROR: code indent should never use tabs
#485: FILE: include/hw/usb/dwc2-regs.h:460:
+#define DCFG_DEVSPD_HS^I^I^I0$
ERROR: code indent should never use tabs
#486: FILE: include/hw/usb/dwc2-regs.h:461:
+#define DCFG_DEVSPD_FS^I^I^I1$
ERROR: code indent should never use tabs
#487: FILE: include/hw/usb/dwc2-regs.h:462:
+#define DCFG_DEVSPD_LS^I^I^I2$
ERROR: code indent should never use tabs
#488: FILE: include/hw/usb/dwc2-regs.h:463:
+#define DCFG_DEVSPD_FS48^I^I3$
ERROR: code indent should never use tabs
#490: FILE: include/hw/usb/dwc2-regs.h:465:
+#define DCTL^I^I^I^IHSOTG_REG(0x804)$
ERROR: code indent should never use tabs
#492: FILE: include/hw/usb/dwc2-regs.h:467:
+#define DCTL_PWRONPRGDONE^I^IBIT(11)$
ERROR: code indent should never use tabs
#493: FILE: include/hw/usb/dwc2-regs.h:468:
+#define DCTL_CGOUTNAK^I^I^IBIT(10)$
ERROR: code indent should never use tabs
#494: FILE: include/hw/usb/dwc2-regs.h:469:
+#define DCTL_SGOUTNAK^I^I^IBIT(9)$
ERROR: code indent should never use tabs
#495: FILE: include/hw/usb/dwc2-regs.h:470:
+#define DCTL_CGNPINNAK^I^I^IBIT(8)$
ERROR: code indent should never use tabs
#496: FILE: include/hw/usb/dwc2-regs.h:471:
+#define DCTL_SGNPINNAK^I^I^IBIT(7)$
ERROR: code indent should never use tabs
#497: FILE: include/hw/usb/dwc2-regs.h:472:
+#define DCTL_TSTCTL_MASK^I^I(0x7 << 4)$
ERROR: code indent should never use tabs
#498: FILE: include/hw/usb/dwc2-regs.h:473:
+#define DCTL_TSTCTL_SHIFT^I^I4$
ERROR: code indent should never use tabs
#499: FILE: include/hw/usb/dwc2-regs.h:474:
+#define DCTL_GOUTNAKSTS^I^I^IBIT(3)$
ERROR: code indent should never use tabs
#500: FILE: include/hw/usb/dwc2-regs.h:475:
+#define DCTL_GNPINNAKSTS^I^IBIT(2)$
ERROR: code indent should never use tabs
#501: FILE: include/hw/usb/dwc2-regs.h:476:
+#define DCTL_SFTDISCON^I^I^IBIT(1)$
ERROR: code indent should never use tabs
#502: FILE: include/hw/usb/dwc2-regs.h:477:
+#define DCTL_RMTWKUPSIG^I^I^IBIT(0)$
ERROR: code indent should never use tabs
#504: FILE: include/hw/usb/dwc2-regs.h:479:
+#define DSTS^I^I^I^IHSOTG_REG(0x808)$
ERROR: code indent should never use tabs
#505: FILE: include/hw/usb/dwc2-regs.h:480:
+#define DSTS_SOFFN_MASK^I^I^I(0x3fff << 8)$
ERROR: code indent should never use tabs
#506: FILE: include/hw/usb/dwc2-regs.h:481:
+#define DSTS_SOFFN_SHIFT^I^I8$
ERROR: code indent should never use tabs
#507: FILE: include/hw/usb/dwc2-regs.h:482:
+#define DSTS_SOFFN_LIMIT^I^I0x3fff$
ERROR: code indent should never use tabs
#508: FILE: include/hw/usb/dwc2-regs.h:483:
+#define DSTS_SOFFN(_x)^I^I^I((_x) << 8)$
ERROR: code indent should never use tabs
#509: FILE: include/hw/usb/dwc2-regs.h:484:
+#define DSTS_ERRATICERR^I^I^IBIT(3)$
ERROR: code indent should never use tabs
#510: FILE: include/hw/usb/dwc2-regs.h:485:
+#define DSTS_ENUMSPD_MASK^I^I(0x3 << 1)$
ERROR: code indent should never use tabs
#511: FILE: include/hw/usb/dwc2-regs.h:486:
+#define DSTS_ENUMSPD_SHIFT^I^I1$
ERROR: code indent should never use tabs
#512: FILE: include/hw/usb/dwc2-regs.h:487:
+#define DSTS_ENUMSPD_HS^I^I^I0$
ERROR: code indent should never use tabs
#513: FILE: include/hw/usb/dwc2-regs.h:488:
+#define DSTS_ENUMSPD_FS^I^I^I1$
ERROR: code indent should never use tabs
#514: FILE: include/hw/usb/dwc2-regs.h:489:
+#define DSTS_ENUMSPD_LS^I^I^I2$
ERROR: code indent should never use tabs
#515: FILE: include/hw/usb/dwc2-regs.h:490:
+#define DSTS_ENUMSPD_FS48^I^I3$
ERROR: code indent should never use tabs
#516: FILE: include/hw/usb/dwc2-regs.h:491:
+#define DSTS_SUSPSTS^I^I^IBIT(0)$
ERROR: code indent should never use tabs
#518: FILE: include/hw/usb/dwc2-regs.h:493:
+#define DIEPMSK^I^I^I^IHSOTG_REG(0x810)$
ERROR: code indent should never use tabs
#519: FILE: include/hw/usb/dwc2-regs.h:494:
+#define DIEPMSK_NAKMSK^I^I^IBIT(13)$
ERROR: code indent should never use tabs
#520: FILE: include/hw/usb/dwc2-regs.h:495:
+#define DIEPMSK_BNAININTRMSK^I^IBIT(9)$
ERROR: code indent should never use tabs
#521: FILE: include/hw/usb/dwc2-regs.h:496:
+#define DIEPMSK_TXFIFOUNDRNMSK^I^IBIT(8)$
ERROR: code indent should never use tabs
#522: FILE: include/hw/usb/dwc2-regs.h:497:
+#define DIEPMSK_TXFIFOEMPTY^I^IBIT(7)$
ERROR: code indent should never use tabs
#523: FILE: include/hw/usb/dwc2-regs.h:498:
+#define DIEPMSK_INEPNAKEFFMSK^I^IBIT(6)$
ERROR: code indent should never use tabs
#524: FILE: include/hw/usb/dwc2-regs.h:499:
+#define DIEPMSK_INTKNEPMISMSK^I^IBIT(5)$
ERROR: code indent should never use tabs
#525: FILE: include/hw/usb/dwc2-regs.h:500:
+#define DIEPMSK_INTKNTXFEMPMSK^I^IBIT(4)$
ERROR: code indent should never use tabs
#526: FILE: include/hw/usb/dwc2-regs.h:501:
+#define DIEPMSK_TIMEOUTMSK^I^IBIT(3)$
ERROR: code indent should never use tabs
#527: FILE: include/hw/usb/dwc2-regs.h:502:
+#define DIEPMSK_AHBERRMSK^I^IBIT(2)$
ERROR: code indent should never use tabs
#528: FILE: include/hw/usb/dwc2-regs.h:503:
+#define DIEPMSK_EPDISBLDMSK^I^IBIT(1)$
ERROR: code indent should never use tabs
#529: FILE: include/hw/usb/dwc2-regs.h:504:
+#define DIEPMSK_XFERCOMPLMSK^I^IBIT(0)$
ERROR: code indent should never use tabs
#531: FILE: include/hw/usb/dwc2-regs.h:506:
+#define DOEPMSK^I^I^I^IHSOTG_REG(0x814)$
ERROR: code indent should never use tabs
#532: FILE: include/hw/usb/dwc2-regs.h:507:
+#define DOEPMSK_BNAMSK^I^I^IBIT(9)$
ERROR: code indent should never use tabs
#533: FILE: include/hw/usb/dwc2-regs.h:508:
+#define DOEPMSK_BACK2BACKSETUP^I^IBIT(6)$
ERROR: code indent should never use tabs
#534: FILE: include/hw/usb/dwc2-regs.h:509:
+#define DOEPMSK_STSPHSERCVDMSK^I^IBIT(5)$
ERROR: code indent should never use tabs
#535: FILE: include/hw/usb/dwc2-regs.h:510:
+#define DOEPMSK_OUTTKNEPDISMSK^I^IBIT(4)$
ERROR: code indent should never use tabs
#536: FILE: include/hw/usb/dwc2-regs.h:511:
+#define DOEPMSK_SETUPMSK^I^IBIT(3)$
ERROR: code indent should never use tabs
#537: FILE: include/hw/usb/dwc2-regs.h:512:
+#define DOEPMSK_AHBERRMSK^I^IBIT(2)$
ERROR: code indent should never use tabs
#538: FILE: include/hw/usb/dwc2-regs.h:513:
+#define DOEPMSK_EPDISBLDMSK^I^IBIT(1)$
ERROR: code indent should never use tabs
#539: FILE: include/hw/usb/dwc2-regs.h:514:
+#define DOEPMSK_XFERCOMPLMSK^I^IBIT(0)$
ERROR: code indent should never use tabs
#541: FILE: include/hw/usb/dwc2-regs.h:516:
+#define DAINT^I^I^I^IHSOTG_REG(0x818)$
ERROR: code indent should never use tabs
#542: FILE: include/hw/usb/dwc2-regs.h:517:
+#define DAINTMSK^I^I^IHSOTG_REG(0x81C)$
ERROR: code indent should never use tabs
#543: FILE: include/hw/usb/dwc2-regs.h:518:
+#define DAINT_OUTEP_SHIFT^I^I16$
ERROR: code indent should never use tabs
#544: FILE: include/hw/usb/dwc2-regs.h:519:
+#define DAINT_OUTEP(_x)^I^I^I(1 << ((_x) + 16))$
ERROR: code indent should never use tabs
#545: FILE: include/hw/usb/dwc2-regs.h:520:
+#define DAINT_INEP(_x)^I^I^I(1 << (_x))$
ERROR: code indent should never use tabs
#547: FILE: include/hw/usb/dwc2-regs.h:522:
+#define DTKNQR1^I^I^I^IHSOTG_REG(0x820)$
ERROR: code indent should never use tabs
#548: FILE: include/hw/usb/dwc2-regs.h:523:
+#define DTKNQR2^I^I^I^IHSOTG_REG(0x824)$
ERROR: code indent should never use tabs
#549: FILE: include/hw/usb/dwc2-regs.h:524:
+#define DTKNQR3^I^I^I^IHSOTG_REG(0x830)$
ERROR: code indent should never use tabs
#550: FILE: include/hw/usb/dwc2-regs.h:525:
+#define DTKNQR4^I^I^I^IHSOTG_REG(0x834)$
ERROR: code indent should never use tabs
#551: FILE: include/hw/usb/dwc2-regs.h:526:
+#define DIEPEMPMSK^I^I^IHSOTG_REG(0x834)$
ERROR: code indent should never use tabs
#553: FILE: include/hw/usb/dwc2-regs.h:528:
+#define DVBUSDIS^I^I^IHSOTG_REG(0x828)$
ERROR: code indent should never use tabs
#554: FILE: include/hw/usb/dwc2-regs.h:529:
+#define DVBUSPULSE^I^I^IHSOTG_REG(0x82C)$
ERROR: code indent should never use tabs
#556: FILE: include/hw/usb/dwc2-regs.h:531:
+#define DIEPCTL0^I^I^IHSOTG_REG(0x900)$
ERROR: code indent should never use tabs
#557: FILE: include/hw/usb/dwc2-regs.h:532:
+#define DIEPCTL(_a)^I^I^IHSOTG_REG(0x900 + ((_a) * 0x20))$
ERROR: code indent should never use tabs
#559: FILE: include/hw/usb/dwc2-regs.h:534:
+#define DOEPCTL0^I^I^IHSOTG_REG(0xB00)$
ERROR: code indent should never use tabs
#560: FILE: include/hw/usb/dwc2-regs.h:535:
+#define DOEPCTL(_a)^I^I^IHSOTG_REG(0xB00 + ((_a) * 0x20))$
WARNING: Block comments use a leading /* on a separate line
#562: FILE: include/hw/usb/dwc2-regs.h:537:
+/* EP0 specialness:
ERROR: code indent should never use tabs
#567: FILE: include/hw/usb/dwc2-regs.h:542:
+#define D0EPCTL_MPS_MASK^I^I(0x3 << 0)$
ERROR: code indent should never use tabs
#568: FILE: include/hw/usb/dwc2-regs.h:543:
+#define D0EPCTL_MPS_SHIFT^I^I0$
ERROR: code indent should never use tabs
#569: FILE: include/hw/usb/dwc2-regs.h:544:
+#define D0EPCTL_MPS_64^I^I^I0$
ERROR: code indent should never use tabs
#570: FILE: include/hw/usb/dwc2-regs.h:545:
+#define D0EPCTL_MPS_32^I^I^I1$
ERROR: code indent should never use tabs
#571: FILE: include/hw/usb/dwc2-regs.h:546:
+#define D0EPCTL_MPS_16^I^I^I2$
ERROR: code indent should never use tabs
#572: FILE: include/hw/usb/dwc2-regs.h:547:
+#define D0EPCTL_MPS_8^I^I^I3$
ERROR: code indent should never use tabs
#574: FILE: include/hw/usb/dwc2-regs.h:549:
+#define DXEPCTL_EPENA^I^I^IBIT(31)$
ERROR: code indent should never use tabs
#575: FILE: include/hw/usb/dwc2-regs.h:550:
+#define DXEPCTL_EPDIS^I^I^IBIT(30)$
ERROR: code indent should never use tabs
#576: FILE: include/hw/usb/dwc2-regs.h:551:
+#define DXEPCTL_SETD1PID^I^IBIT(29)$
ERROR: code indent should never use tabs
#577: FILE: include/hw/usb/dwc2-regs.h:552:
+#define DXEPCTL_SETODDFR^I^IBIT(29)$
ERROR: code indent should never use tabs
#578: FILE: include/hw/usb/dwc2-regs.h:553:
+#define DXEPCTL_SETD0PID^I^IBIT(28)$
ERROR: code indent should never use tabs
#579: FILE: include/hw/usb/dwc2-regs.h:554:
+#define DXEPCTL_SETEVENFR^I^IBIT(28)$
ERROR: code indent should never use tabs
#580: FILE: include/hw/usb/dwc2-regs.h:555:
+#define DXEPCTL_SNAK^I^I^IBIT(27)$
ERROR: code indent should never use tabs
#581: FILE: include/hw/usb/dwc2-regs.h:556:
+#define DXEPCTL_CNAK^I^I^IBIT(26)$
ERROR: code indent should never use tabs
#582: FILE: include/hw/usb/dwc2-regs.h:557:
+#define DXEPCTL_TXFNUM_MASK^I^I(0xf << 22)$
ERROR: code indent should never use tabs
#583: FILE: include/hw/usb/dwc2-regs.h:558:
+#define DXEPCTL_TXFNUM_SHIFT^I^I22$
ERROR: code indent should never use tabs
#584: FILE: include/hw/usb/dwc2-regs.h:559:
+#define DXEPCTL_TXFNUM_LIMIT^I^I0xf$
ERROR: code indent should never use tabs
#585: FILE: include/hw/usb/dwc2-regs.h:560:
+#define DXEPCTL_TXFNUM(_x)^I^I((_x) << 22)$
ERROR: code indent should never use tabs
#586: FILE: include/hw/usb/dwc2-regs.h:561:
+#define DXEPCTL_STALL^I^I^IBIT(21)$
ERROR: code indent should never use tabs
#587: FILE: include/hw/usb/dwc2-regs.h:562:
+#define DXEPCTL_SNP^I^I^IBIT(20)$
ERROR: code indent should never use tabs
#588: FILE: include/hw/usb/dwc2-regs.h:563:
+#define DXEPCTL_EPTYPE_MASK^I^I(0x3 << 18)$
ERROR: code indent should never use tabs
#589: FILE: include/hw/usb/dwc2-regs.h:564:
+#define DXEPCTL_EPTYPE_CONTROL^I^I(0x0 << 18)$
ERROR: code indent should never use tabs
#590: FILE: include/hw/usb/dwc2-regs.h:565:
+#define DXEPCTL_EPTYPE_ISO^I^I(0x1 << 18)$
ERROR: code indent should never use tabs
#591: FILE: include/hw/usb/dwc2-regs.h:566:
+#define DXEPCTL_EPTYPE_BULK^I^I(0x2 << 18)$
ERROR: code indent should never use tabs
#592: FILE: include/hw/usb/dwc2-regs.h:567:
+#define DXEPCTL_EPTYPE_INTERRUPT^I(0x3 << 18)$
ERROR: code indent should never use tabs
#594: FILE: include/hw/usb/dwc2-regs.h:569:
+#define DXEPCTL_NAKSTS^I^I^IBIT(17)$
ERROR: code indent should never use tabs
#595: FILE: include/hw/usb/dwc2-regs.h:570:
+#define DXEPCTL_DPID^I^I^IBIT(16)$
ERROR: code indent should never use tabs
#596: FILE: include/hw/usb/dwc2-regs.h:571:
+#define DXEPCTL_EOFRNUM^I^I^IBIT(16)$
ERROR: code indent should never use tabs
#597: FILE: include/hw/usb/dwc2-regs.h:572:
+#define DXEPCTL_USBACTEP^I^IBIT(15)$
ERROR: code indent should never use tabs
#598: FILE: include/hw/usb/dwc2-regs.h:573:
+#define DXEPCTL_NEXTEP_MASK^I^I(0xf << 11)$
ERROR: code indent should never use tabs
#599: FILE: include/hw/usb/dwc2-regs.h:574:
+#define DXEPCTL_NEXTEP_SHIFT^I^I11$
ERROR: code indent should never use tabs
#600: FILE: include/hw/usb/dwc2-regs.h:575:
+#define DXEPCTL_NEXTEP_LIMIT^I^I0xf$
ERROR: code indent should never use tabs
#601: FILE: include/hw/usb/dwc2-regs.h:576:
+#define DXEPCTL_NEXTEP(_x)^I^I((_x) << 11)$
ERROR: code indent should never use tabs
#602: FILE: include/hw/usb/dwc2-regs.h:577:
+#define DXEPCTL_MPS_MASK^I^I(0x7ff << 0)$
ERROR: code indent should never use tabs
#603: FILE: include/hw/usb/dwc2-regs.h:578:
+#define DXEPCTL_MPS_SHIFT^I^I0$
ERROR: code indent should never use tabs
#604: FILE: include/hw/usb/dwc2-regs.h:579:
+#define DXEPCTL_MPS_LIMIT^I^I0x7ff$
ERROR: code indent should never use tabs
#605: FILE: include/hw/usb/dwc2-regs.h:580:
+#define DXEPCTL_MPS(_x)^I^I^I((_x) << 0)$
ERROR: code indent should never use tabs
#607: FILE: include/hw/usb/dwc2-regs.h:582:
+#define DIEPINT(_a)^I^I^IHSOTG_REG(0x908 + ((_a) * 0x20))$
ERROR: code indent should never use tabs
#608: FILE: include/hw/usb/dwc2-regs.h:583:
+#define DOEPINT(_a)^I^I^IHSOTG_REG(0xB08 + ((_a) * 0x20))$
ERROR: code indent should never use tabs
#609: FILE: include/hw/usb/dwc2-regs.h:584:
+#define DXEPINT_SETUP_RCVD^I^IBIT(15)$
ERROR: code indent should never use tabs
#610: FILE: include/hw/usb/dwc2-regs.h:585:
+#define DXEPINT_NYETINTRPT^I^IBIT(14)$
ERROR: code indent should never use tabs
#611: FILE: include/hw/usb/dwc2-regs.h:586:
+#define DXEPINT_NAKINTRPT^I^IBIT(13)$
ERROR: code indent should never use tabs
#612: FILE: include/hw/usb/dwc2-regs.h:587:
+#define DXEPINT_BBLEERRINTRPT^I^IBIT(12)$
ERROR: code indent should never use tabs
#613: FILE: include/hw/usb/dwc2-regs.h:588:
+#define DXEPINT_PKTDRPSTS^I^IBIT(11)$
ERROR: code indent should never use tabs
#614: FILE: include/hw/usb/dwc2-regs.h:589:
+#define DXEPINT_BNAINTR^I^I^IBIT(9)$
ERROR: code indent should never use tabs
#615: FILE: include/hw/usb/dwc2-regs.h:590:
+#define DXEPINT_TXFIFOUNDRN^I^IBIT(8)$
ERROR: code indent should never use tabs
#616: FILE: include/hw/usb/dwc2-regs.h:591:
+#define DXEPINT_OUTPKTERR^I^IBIT(8)$
ERROR: code indent should never use tabs
#617: FILE: include/hw/usb/dwc2-regs.h:592:
+#define DXEPINT_TXFEMP^I^I^IBIT(7)$
ERROR: code indent should never use tabs
#618: FILE: include/hw/usb/dwc2-regs.h:593:
+#define DXEPINT_INEPNAKEFF^I^IBIT(6)$
ERROR: code indent should never use tabs
#619: FILE: include/hw/usb/dwc2-regs.h:594:
+#define DXEPINT_BACK2BACKSETUP^I^IBIT(6)$
ERROR: code indent should never use tabs
#620: FILE: include/hw/usb/dwc2-regs.h:595:
+#define DXEPINT_INTKNEPMIS^I^IBIT(5)$
ERROR: code indent should never use tabs
#621: FILE: include/hw/usb/dwc2-regs.h:596:
+#define DXEPINT_STSPHSERCVD^I^IBIT(5)$
ERROR: code indent should never use tabs
#622: FILE: include/hw/usb/dwc2-regs.h:597:
+#define DXEPINT_INTKNTXFEMP^I^IBIT(4)$
ERROR: code indent should never use tabs
#623: FILE: include/hw/usb/dwc2-regs.h:598:
+#define DXEPINT_OUTTKNEPDIS^I^IBIT(4)$
ERROR: code indent should never use tabs
#624: FILE: include/hw/usb/dwc2-regs.h:599:
+#define DXEPINT_TIMEOUT^I^I^IBIT(3)$
ERROR: code indent should never use tabs
#625: FILE: include/hw/usb/dwc2-regs.h:600:
+#define DXEPINT_SETUP^I^I^IBIT(3)$
ERROR: code indent should never use tabs
#626: FILE: include/hw/usb/dwc2-regs.h:601:
+#define DXEPINT_AHBERR^I^I^IBIT(2)$
ERROR: code indent should never use tabs
#627: FILE: include/hw/usb/dwc2-regs.h:602:
+#define DXEPINT_EPDISBLD^I^IBIT(1)$
ERROR: code indent should never use tabs
#628: FILE: include/hw/usb/dwc2-regs.h:603:
+#define DXEPINT_XFERCOMPL^I^IBIT(0)$
ERROR: code indent should never use tabs
#630: FILE: include/hw/usb/dwc2-regs.h:605:
+#define DIEPTSIZ0^I^I^IHSOTG_REG(0x910)$
ERROR: code indent should never use tabs
#631: FILE: include/hw/usb/dwc2-regs.h:606:
+#define DIEPTSIZ0_PKTCNT_MASK^I^I(0x3 << 19)$
ERROR: code indent should never use tabs
#632: FILE: include/hw/usb/dwc2-regs.h:607:
+#define DIEPTSIZ0_PKTCNT_SHIFT^I^I19$
ERROR: code indent should never use tabs
#633: FILE: include/hw/usb/dwc2-regs.h:608:
+#define DIEPTSIZ0_PKTCNT_LIMIT^I^I0x3$
ERROR: code indent should never use tabs
#634: FILE: include/hw/usb/dwc2-regs.h:609:
+#define DIEPTSIZ0_PKTCNT(_x)^I^I((_x) << 19)$
ERROR: code indent should never use tabs
#635: FILE: include/hw/usb/dwc2-regs.h:610:
+#define DIEPTSIZ0_XFERSIZE_MASK^I^I(0x7f << 0)$
ERROR: code indent should never use tabs
#636: FILE: include/hw/usb/dwc2-regs.h:611:
+#define DIEPTSIZ0_XFERSIZE_SHIFT^I0$
ERROR: code indent should never use tabs
#637: FILE: include/hw/usb/dwc2-regs.h:612:
+#define DIEPTSIZ0_XFERSIZE_LIMIT^I0x7f$
ERROR: code indent should never use tabs
#638: FILE: include/hw/usb/dwc2-regs.h:613:
+#define DIEPTSIZ0_XFERSIZE(_x)^I^I((_x) << 0)$
ERROR: code indent should never use tabs
#640: FILE: include/hw/usb/dwc2-regs.h:615:
+#define DOEPTSIZ0^I^I^IHSOTG_REG(0xB10)$
ERROR: code indent should never use tabs
#641: FILE: include/hw/usb/dwc2-regs.h:616:
+#define DOEPTSIZ0_SUPCNT_MASK^I^I(0x3 << 29)$
ERROR: code indent should never use tabs
#642: FILE: include/hw/usb/dwc2-regs.h:617:
+#define DOEPTSIZ0_SUPCNT_SHIFT^I^I29$
ERROR: code indent should never use tabs
#643: FILE: include/hw/usb/dwc2-regs.h:618:
+#define DOEPTSIZ0_SUPCNT_LIMIT^I^I0x3$
ERROR: code indent should never use tabs
#644: FILE: include/hw/usb/dwc2-regs.h:619:
+#define DOEPTSIZ0_SUPCNT(_x)^I^I((_x) << 29)$
ERROR: code indent should never use tabs
#645: FILE: include/hw/usb/dwc2-regs.h:620:
+#define DOEPTSIZ0_PKTCNT^I^IBIT(19)$
ERROR: code indent should never use tabs
#646: FILE: include/hw/usb/dwc2-regs.h:621:
+#define DOEPTSIZ0_XFERSIZE_MASK^I^I(0x7f << 0)$
ERROR: code indent should never use tabs
#647: FILE: include/hw/usb/dwc2-regs.h:622:
+#define DOEPTSIZ0_XFERSIZE_SHIFT^I0$
ERROR: code indent should never use tabs
#649: FILE: include/hw/usb/dwc2-regs.h:624:
+#define DIEPTSIZ(_a)^I^I^IHSOTG_REG(0x910 + ((_a) * 0x20))$
ERROR: code indent should never use tabs
#650: FILE: include/hw/usb/dwc2-regs.h:625:
+#define DOEPTSIZ(_a)^I^I^IHSOTG_REG(0xB10 + ((_a) * 0x20))$
ERROR: code indent should never use tabs
#651: FILE: include/hw/usb/dwc2-regs.h:626:
+#define DXEPTSIZ_MC_MASK^I^I(0x3 << 29)$
ERROR: code indent should never use tabs
#652: FILE: include/hw/usb/dwc2-regs.h:627:
+#define DXEPTSIZ_MC_SHIFT^I^I29$
ERROR: code indent should never use tabs
#653: FILE: include/hw/usb/dwc2-regs.h:628:
+#define DXEPTSIZ_MC_LIMIT^I^I0x3$
ERROR: code indent should never use tabs
#654: FILE: include/hw/usb/dwc2-regs.h:629:
+#define DXEPTSIZ_MC(_x)^I^I^I((_x) << 29)$
ERROR: code indent should never use tabs
#655: FILE: include/hw/usb/dwc2-regs.h:630:
+#define DXEPTSIZ_PKTCNT_MASK^I^I(0x3ff << 19)$
ERROR: code indent should never use tabs
#656: FILE: include/hw/usb/dwc2-regs.h:631:
+#define DXEPTSIZ_PKTCNT_SHIFT^I^I19$
ERROR: code indent should never use tabs
#657: FILE: include/hw/usb/dwc2-regs.h:632:
+#define DXEPTSIZ_PKTCNT_LIMIT^I^I0x3ff$
ERROR: code indent should never use tabs
#658: FILE: include/hw/usb/dwc2-regs.h:633:
+#define DXEPTSIZ_PKTCNT_GET(_v)^I^I(((_v) >> 19) & 0x3ff)$
ERROR: code indent should never use tabs
#659: FILE: include/hw/usb/dwc2-regs.h:634:
+#define DXEPTSIZ_PKTCNT(_x)^I^I((_x) << 19)$
ERROR: code indent should never use tabs
#660: FILE: include/hw/usb/dwc2-regs.h:635:
+#define DXEPTSIZ_XFERSIZE_MASK^I^I(0x7ffff << 0)$
ERROR: code indent should never use tabs
#661: FILE: include/hw/usb/dwc2-regs.h:636:
+#define DXEPTSIZ_XFERSIZE_SHIFT^I^I0$
ERROR: code indent should never use tabs
#662: FILE: include/hw/usb/dwc2-regs.h:637:
+#define DXEPTSIZ_XFERSIZE_LIMIT^I^I0x7ffff$
ERROR: code indent should never use tabs
#663: FILE: include/hw/usb/dwc2-regs.h:638:
+#define DXEPTSIZ_XFERSIZE_GET(_v)^I(((_v) >> 0) & 0x7ffff)$
ERROR: code indent should never use tabs
#664: FILE: include/hw/usb/dwc2-regs.h:639:
+#define DXEPTSIZ_XFERSIZE(_x)^I^I((_x) << 0)$
ERROR: code indent should never use tabs
#666: FILE: include/hw/usb/dwc2-regs.h:641:
+#define DIEPDMA(_a)^I^I^IHSOTG_REG(0x914 + ((_a) * 0x20))$
ERROR: code indent should never use tabs
#667: FILE: include/hw/usb/dwc2-regs.h:642:
+#define DOEPDMA(_a)^I^I^IHSOTG_REG(0xB14 + ((_a) * 0x20))$
ERROR: code indent should never use tabs
#669: FILE: include/hw/usb/dwc2-regs.h:644:
+#define DTXFSTS(_a)^I^I^IHSOTG_REG(0x918 + ((_a) * 0x20))$
ERROR: code indent should never use tabs
#671: FILE: include/hw/usb/dwc2-regs.h:646:
+#define PCGCTL^I^I^I^IHSOTG_REG(0x0e00)$
ERROR: code indent should never use tabs
#672: FILE: include/hw/usb/dwc2-regs.h:647:
+#define PCGCTL_IF_DEV_MODE^I^IBIT(31)$
ERROR: code indent should never use tabs
#673: FILE: include/hw/usb/dwc2-regs.h:648:
+#define PCGCTL_P2HD_PRT_SPD_MASK^I(0x3 << 29)$
ERROR: code indent should never use tabs
#674: FILE: include/hw/usb/dwc2-regs.h:649:
+#define PCGCTL_P2HD_PRT_SPD_SHIFT^I29$
ERROR: code indent should never use tabs
#675: FILE: include/hw/usb/dwc2-regs.h:650:
+#define PCGCTL_P2HD_DEV_ENUM_SPD_MASK^I(0x3 << 27)$
ERROR: code indent should never use tabs
#676: FILE: include/hw/usb/dwc2-regs.h:651:
+#define PCGCTL_P2HD_DEV_ENUM_SPD_SHIFT^I27$
ERROR: code indent should never use tabs
#677: FILE: include/hw/usb/dwc2-regs.h:652:
+#define PCGCTL_MAC_DEV_ADDR_MASK^I(0x7f << 20)$
ERROR: code indent should never use tabs
#678: FILE: include/hw/usb/dwc2-regs.h:653:
+#define PCGCTL_MAC_DEV_ADDR_SHIFT^I20$
ERROR: code indent should never use tabs
#679: FILE: include/hw/usb/dwc2-regs.h:654:
+#define PCGCTL_MAX_TERMSEL^I^IBIT(19)$
ERROR: code indent should never use tabs
#680: FILE: include/hw/usb/dwc2-regs.h:655:
+#define PCGCTL_MAX_XCVRSELECT_MASK^I(0x3 << 17)$
ERROR: code indent should never use tabs
#681: FILE: include/hw/usb/dwc2-regs.h:656:
+#define PCGCTL_MAX_XCVRSELECT_SHIFT^I17$
ERROR: code indent should never use tabs
#682: FILE: include/hw/usb/dwc2-regs.h:657:
+#define PCGCTL_PORT_POWER^I^IBIT(16)$
ERROR: code indent should never use tabs
#683: FILE: include/hw/usb/dwc2-regs.h:658:
+#define PCGCTL_PRT_CLK_SEL_MASK^I^I(0x3 << 14)$
ERROR: code indent should never use tabs
#684: FILE: include/hw/usb/dwc2-regs.h:659:
+#define PCGCTL_PRT_CLK_SEL_SHIFT^I14$
ERROR: code indent should never use tabs
#685: FILE: include/hw/usb/dwc2-regs.h:660:
+#define PCGCTL_ESS_REG_RESTORED^I^IBIT(13)$
ERROR: code indent should never use tabs
#686: FILE: include/hw/usb/dwc2-regs.h:661:
+#define PCGCTL_EXTND_HIBER_SWITCH^IBIT(12)$
ERROR: code indent should never use tabs
#687: FILE: include/hw/usb/dwc2-regs.h:662:
+#define PCGCTL_EXTND_HIBER_PWRCLMP^IBIT(11)$
ERROR: code indent should never use tabs
#688: FILE: include/hw/usb/dwc2-regs.h:663:
+#define PCGCTL_ENBL_EXTND_HIBER^I^IBIT(10)$
ERROR: code indent should never use tabs
#689: FILE: include/hw/usb/dwc2-regs.h:664:
+#define PCGCTL_RESTOREMODE^I^IBIT(9)$
ERROR: code indent should never use tabs
#690: FILE: include/hw/usb/dwc2-regs.h:665:
+#define PCGCTL_RESETAFTSUSP^I^IBIT(8)$
ERROR: code indent should never use tabs
#691: FILE: include/hw/usb/dwc2-regs.h:666:
+#define PCGCTL_DEEP_SLEEP^I^IBIT(7)$
ERROR: code indent should never use tabs
#692: FILE: include/hw/usb/dwc2-regs.h:667:
+#define PCGCTL_PHY_IN_SLEEP^I^IBIT(6)$
ERROR: code indent should never use tabs
#693: FILE: include/hw/usb/dwc2-regs.h:668:
+#define PCGCTL_ENBL_SLEEP_GATING^IBIT(5)$
ERROR: code indent should never use tabs
#694: FILE: include/hw/usb/dwc2-regs.h:669:
+#define PCGCTL_RSTPDWNMODULE^I^IBIT(3)$
ERROR: code indent should never use tabs
#695: FILE: include/hw/usb/dwc2-regs.h:670:
+#define PCGCTL_PWRCLMP^I^I^IBIT(2)$
ERROR: code indent should never use tabs
#696: FILE: include/hw/usb/dwc2-regs.h:671:
+#define PCGCTL_GATEHCLK^I^I^IBIT(1)$
ERROR: code indent should never use tabs
#697: FILE: include/hw/usb/dwc2-regs.h:672:
+#define PCGCTL_STOPPCLK^I^I^IBIT(0)$
ERROR: code indent should never use tabs
#703: FILE: include/hw/usb/dwc2-regs.h:678:
+#define EPFIFO(_a)^I^I^IHSOTG_REG(0x1000 + ((_a) * 0x1000))$
ERROR: code indent should never use tabs
#707: FILE: include/hw/usb/dwc2-regs.h:682:
+#define HCFG^I^I^I^IHSOTG_REG(0x0400)$
ERROR: code indent should never use tabs
#708: FILE: include/hw/usb/dwc2-regs.h:683:
+#define HCFG_MODECHTIMEN^I^IBIT(31)$
ERROR: code indent should never use tabs
#709: FILE: include/hw/usb/dwc2-regs.h:684:
+#define HCFG_PERSCHEDENA^I^IBIT(26)$
ERROR: code indent should never use tabs
#710: FILE: include/hw/usb/dwc2-regs.h:685:
+#define HCFG_FRLISTEN_MASK^I^I(0x3 << 24)$
ERROR: code indent should never use tabs
#711: FILE: include/hw/usb/dwc2-regs.h:686:
+#define HCFG_FRLISTEN_SHIFT^I^I24$
ERROR: code indent should never use tabs
#712: FILE: include/hw/usb/dwc2-regs.h:687:
+#define HCFG_FRLISTEN_8^I^I^I^I(0 << 24)$
ERROR: code indent should never use tabs
#713: FILE: include/hw/usb/dwc2-regs.h:688:
+#define FRLISTEN_8_SIZE^I^I^I^I8$
ERROR: code indent should never use tabs
#714: FILE: include/hw/usb/dwc2-regs.h:689:
+#define HCFG_FRLISTEN_16^I^I^IBIT(24)$
ERROR: code indent should never use tabs
#715: FILE: include/hw/usb/dwc2-regs.h:690:
+#define FRLISTEN_16_SIZE^I^I^I16$
ERROR: code indent should never use tabs
#716: FILE: include/hw/usb/dwc2-regs.h:691:
+#define HCFG_FRLISTEN_32^I^I^I(2 << 24)$
ERROR: code indent should never use tabs
#717: FILE: include/hw/usb/dwc2-regs.h:692:
+#define FRLISTEN_32_SIZE^I^I^I32$
ERROR: code indent should never use tabs
#718: FILE: include/hw/usb/dwc2-regs.h:693:
+#define HCFG_FRLISTEN_64^I^I^I(3 << 24)$
ERROR: code indent should never use tabs
#719: FILE: include/hw/usb/dwc2-regs.h:694:
+#define FRLISTEN_64_SIZE^I^I^I64$
ERROR: code indent should never use tabs
#720: FILE: include/hw/usb/dwc2-regs.h:695:
+#define HCFG_DESCDMA^I^I^IBIT(23)$
ERROR: code indent should never use tabs
#721: FILE: include/hw/usb/dwc2-regs.h:696:
+#define HCFG_RESVALID_MASK^I^I(0xff << 8)$
ERROR: code indent should never use tabs
#722: FILE: include/hw/usb/dwc2-regs.h:697:
+#define HCFG_RESVALID_SHIFT^I^I8$
ERROR: code indent should never use tabs
#723: FILE: include/hw/usb/dwc2-regs.h:698:
+#define HCFG_ENA32KHZ^I^I^IBIT(7)$
ERROR: code indent should never use tabs
#724: FILE: include/hw/usb/dwc2-regs.h:699:
+#define HCFG_FSLSSUPP^I^I^IBIT(2)$
ERROR: code indent should never use tabs
#725: FILE: include/hw/usb/dwc2-regs.h:700:
+#define HCFG_FSLSPCLKSEL_MASK^I^I(0x3 << 0)$
ERROR: code indent should never use tabs
#726: FILE: include/hw/usb/dwc2-regs.h:701:
+#define HCFG_FSLSPCLKSEL_SHIFT^I^I0$
ERROR: code indent should never use tabs
#727: FILE: include/hw/usb/dwc2-regs.h:702:
+#define HCFG_FSLSPCLKSEL_30_60_MHZ^I0$
ERROR: code indent should never use tabs
#728: FILE: include/hw/usb/dwc2-regs.h:703:
+#define HCFG_FSLSPCLKSEL_48_MHZ^I^I1$
ERROR: code indent should never use tabs
#729: FILE: include/hw/usb/dwc2-regs.h:704:
+#define HCFG_FSLSPCLKSEL_6_MHZ^I^I2$
ERROR: code indent should never use tabs
#731: FILE: include/hw/usb/dwc2-regs.h:706:
+#define HFIR^I^I^I^IHSOTG_REG(0x0404)$
ERROR: code indent should never use tabs
#732: FILE: include/hw/usb/dwc2-regs.h:707:
+#define HFIR_FRINT_MASK^I^I^I(0xffff << 0)$
ERROR: code indent should never use tabs
#733: FILE: include/hw/usb/dwc2-regs.h:708:
+#define HFIR_FRINT_SHIFT^I^I0$
ERROR: code indent should never use tabs
#734: FILE: include/hw/usb/dwc2-regs.h:709:
+#define HFIR_RLDCTRL^I^I^IBIT(16)$
ERROR: code indent should never use tabs
#736: FILE: include/hw/usb/dwc2-regs.h:711:
+#define HFNUM^I^I^I^IHSOTG_REG(0x0408)$
ERROR: code indent should never use tabs
#737: FILE: include/hw/usb/dwc2-regs.h:712:
+#define HFNUM_FRREM_MASK^I^I(0xffff << 16)$
ERROR: code indent should never use tabs
#738: FILE: include/hw/usb/dwc2-regs.h:713:
+#define HFNUM_FRREM_SHIFT^I^I16$
ERROR: code indent should never use tabs
#739: FILE: include/hw/usb/dwc2-regs.h:714:
+#define HFNUM_FRNUM_MASK^I^I(0xffff << 0)$
ERROR: code indent should never use tabs
#740: FILE: include/hw/usb/dwc2-regs.h:715:
+#define HFNUM_FRNUM_SHIFT^I^I0$
ERROR: code indent should never use tabs
#741: FILE: include/hw/usb/dwc2-regs.h:716:
+#define HFNUM_MAX_FRNUM^I^I^I0x3fff$
ERROR: code indent should never use tabs
#743: FILE: include/hw/usb/dwc2-regs.h:718:
+#define HPTXSTS^I^I^I^IHSOTG_REG(0x0410)$
ERROR: code indent should never use tabs
#744: FILE: include/hw/usb/dwc2-regs.h:719:
+#define TXSTS_QTOP_ODD^I^I^IBIT(31)$
ERROR: code indent should never use tabs
#745: FILE: include/hw/usb/dwc2-regs.h:720:
+#define TXSTS_QTOP_CHNEP_MASK^I^I(0xf << 27)$
ERROR: code indent should never use tabs
#746: FILE: include/hw/usb/dwc2-regs.h:721:
+#define TXSTS_QTOP_CHNEP_SHIFT^I^I27$
ERROR: code indent should never use tabs
#747: FILE: include/hw/usb/dwc2-regs.h:722:
+#define TXSTS_QTOP_TOKEN_MASK^I^I(0x3 << 25)$
ERROR: code indent should never use tabs
#748: FILE: include/hw/usb/dwc2-regs.h:723:
+#define TXSTS_QTOP_TOKEN_SHIFT^I^I25$
ERROR: code indent should never use tabs
#749: FILE: include/hw/usb/dwc2-regs.h:724:
+#define TXSTS_QTOP_TERMINATE^I^IBIT(24)$
ERROR: code indent should never use tabs
#750: FILE: include/hw/usb/dwc2-regs.h:725:
+#define TXSTS_QSPCAVAIL_MASK^I^I(0xff << 16)$
ERROR: code indent should never use tabs
#751: FILE: include/hw/usb/dwc2-regs.h:726:
+#define TXSTS_QSPCAVAIL_SHIFT^I^I16$
ERROR: code indent should never use tabs
#752: FILE: include/hw/usb/dwc2-regs.h:727:
+#define TXSTS_FSPCAVAIL_MASK^I^I(0xffff << 0)$
ERROR: code indent should never use tabs
#753: FILE: include/hw/usb/dwc2-regs.h:728:
+#define TXSTS_FSPCAVAIL_SHIFT^I^I0$
ERROR: code indent should never use tabs
#755: FILE: include/hw/usb/dwc2-regs.h:730:
+#define HAINT^I^I^I^IHSOTG_REG(0x0414)$
ERROR: code indent should never use tabs
#756: FILE: include/hw/usb/dwc2-regs.h:731:
+#define HAINTMSK^I^I^IHSOTG_REG(0x0418)$
ERROR: code indent should never use tabs
#757: FILE: include/hw/usb/dwc2-regs.h:732:
+#define HFLBADDR^I^I^IHSOTG_REG(0x041c)$
ERROR: code indent should never use tabs
#759: FILE: include/hw/usb/dwc2-regs.h:734:
+#define HPRT0^I^I^I^IHSOTG_REG(0x0440)$
ERROR: code indent should never use tabs
#760: FILE: include/hw/usb/dwc2-regs.h:735:
+#define HPRT0_SPD_MASK^I^I^I(0x3 << 17)$
ERROR: code indent should never use tabs
#761: FILE: include/hw/usb/dwc2-regs.h:736:
+#define HPRT0_SPD_SHIFT^I^I^I17$
ERROR: code indent should never use tabs
#762: FILE: include/hw/usb/dwc2-regs.h:737:
+#define HPRT0_SPD_HIGH_SPEED^I^I0$
ERROR: code indent should never use tabs
#763: FILE: include/hw/usb/dwc2-regs.h:738:
+#define HPRT0_SPD_FULL_SPEED^I^I1$
ERROR: code indent should never use tabs
#764: FILE: include/hw/usb/dwc2-regs.h:739:
+#define HPRT0_SPD_LOW_SPEED^I^I2$
ERROR: code indent should never use tabs
#765: FILE: include/hw/usb/dwc2-regs.h:740:
+#define HPRT0_TSTCTL_MASK^I^I(0xf << 13)$
ERROR: code indent should never use tabs
#766: FILE: include/hw/usb/dwc2-regs.h:741:
+#define HPRT0_TSTCTL_SHIFT^I^I13$
ERROR: code indent should never use tabs
#767: FILE: include/hw/usb/dwc2-regs.h:742:
+#define HPRT0_PWR^I^I^IBIT(12)$
ERROR: code indent should never use tabs
#768: FILE: include/hw/usb/dwc2-regs.h:743:
+#define HPRT0_LNSTS_MASK^I^I(0x3 << 10)$
ERROR: code indent should never use tabs
#769: FILE: include/hw/usb/dwc2-regs.h:744:
+#define HPRT0_LNSTS_SHIFT^I^I10$
ERROR: code indent should never use tabs
#770: FILE: include/hw/usb/dwc2-regs.h:745:
+#define HPRT0_RST^I^I^IBIT(8)$
ERROR: code indent should never use tabs
#771: FILE: include/hw/usb/dwc2-regs.h:746:
+#define HPRT0_SUSP^I^I^IBIT(7)$
ERROR: code indent should never use tabs
#772: FILE: include/hw/usb/dwc2-regs.h:747:
+#define HPRT0_RES^I^I^IBIT(6)$
ERROR: code indent should never use tabs
#773: FILE: include/hw/usb/dwc2-regs.h:748:
+#define HPRT0_OVRCURRCHG^I^IBIT(5)$
ERROR: code indent should never use tabs
#774: FILE: include/hw/usb/dwc2-regs.h:749:
+#define HPRT0_OVRCURRACT^I^IBIT(4)$
ERROR: code indent should never use tabs
#775: FILE: include/hw/usb/dwc2-regs.h:750:
+#define HPRT0_ENACHG^I^I^IBIT(3)$
ERROR: code indent should never use tabs
#776: FILE: include/hw/usb/dwc2-regs.h:751:
+#define HPRT0_ENA^I^I^IBIT(2)$
ERROR: code indent should never use tabs
#777: FILE: include/hw/usb/dwc2-regs.h:752:
+#define HPRT0_CONNDET^I^I^IBIT(1)$
ERROR: code indent should never use tabs
#778: FILE: include/hw/usb/dwc2-regs.h:753:
+#define HPRT0_CONNSTS^I^I^IBIT(0)$
ERROR: code indent should never use tabs
#780: FILE: include/hw/usb/dwc2-regs.h:755:
+#define HCCHAR(_ch)^I^I^IHSOTG_REG(0x0500 + 0x20 * (_ch))$
ERROR: code indent should never use tabs
#781: FILE: include/hw/usb/dwc2-regs.h:756:
+#define HCCHAR_CHENA^I^I^IBIT(31)$
ERROR: code indent should never use tabs
#782: FILE: include/hw/usb/dwc2-regs.h:757:
+#define HCCHAR_CHDIS^I^I^IBIT(30)$
ERROR: code indent should never use tabs
#783: FILE: include/hw/usb/dwc2-regs.h:758:
+#define HCCHAR_ODDFRM^I^I^IBIT(29)$
ERROR: code indent should never use tabs
#784: FILE: include/hw/usb/dwc2-regs.h:759:
+#define HCCHAR_DEVADDR_MASK^I^I(0x7f << 22)$
ERROR: code indent should never use tabs
#785: FILE: include/hw/usb/dwc2-regs.h:760:
+#define HCCHAR_DEVADDR_SHIFT^I^I22$
ERROR: code indent should never use tabs
#786: FILE: include/hw/usb/dwc2-regs.h:761:
+#define HCCHAR_MULTICNT_MASK^I^I(0x3 << 20)$
ERROR: code indent should never use tabs
#787: FILE: include/hw/usb/dwc2-regs.h:762:
+#define HCCHAR_MULTICNT_SHIFT^I^I20$
ERROR: code indent should never use tabs
#788: FILE: include/hw/usb/dwc2-regs.h:763:
+#define HCCHAR_EPTYPE_MASK^I^I(0x3 << 18)$
ERROR: code indent should never use tabs
#789: FILE: include/hw/usb/dwc2-regs.h:764:
+#define HCCHAR_EPTYPE_SHIFT^I^I18$
ERROR: code indent should never use tabs
#790: FILE: include/hw/usb/dwc2-regs.h:765:
+#define HCCHAR_LSPDDEV^I^I^IBIT(17)$
ERROR: code indent should never use tabs
#791: FILE: include/hw/usb/dwc2-regs.h:766:
+#define HCCHAR_EPDIR^I^I^IBIT(15)$
ERROR: code indent should never use tabs
#792: FILE: include/hw/usb/dwc2-regs.h:767:
+#define HCCHAR_EPNUM_MASK^I^I(0xf << 11)$
ERROR: code indent should never use tabs
#793: FILE: include/hw/usb/dwc2-regs.h:768:
+#define HCCHAR_EPNUM_SHIFT^I^I11$
ERROR: code indent should never use tabs
#794: FILE: include/hw/usb/dwc2-regs.h:769:
+#define HCCHAR_MPS_MASK^I^I^I(0x7ff << 0)$
ERROR: code indent should never use tabs
#795: FILE: include/hw/usb/dwc2-regs.h:770:
+#define HCCHAR_MPS_SHIFT^I^I0$
ERROR: code indent should never use tabs
#797: FILE: include/hw/usb/dwc2-regs.h:772:
+#define HCSPLT(_ch)^I^I^IHSOTG_REG(0x0504 + 0x20 * (_ch))$
ERROR: code indent should never use tabs
#798: FILE: include/hw/usb/dwc2-regs.h:773:
+#define HCSPLT_SPLTENA^I^I^IBIT(31)$
ERROR: code indent should never use tabs
#799: FILE: include/hw/usb/dwc2-regs.h:774:
+#define HCSPLT_COMPSPLT^I^I^IBIT(16)$
ERROR: code indent should never use tabs
#800: FILE: include/hw/usb/dwc2-regs.h:775:
+#define HCSPLT_XACTPOS_MASK^I^I(0x3 << 14)$
ERROR: code indent should never use tabs
#801: FILE: include/hw/usb/dwc2-regs.h:776:
+#define HCSPLT_XACTPOS_SHIFT^I^I14$
ERROR: code indent should never use tabs
#802: FILE: include/hw/usb/dwc2-regs.h:777:
+#define HCSPLT_XACTPOS_MID^I^I0$
ERROR: code indent should never use tabs
#803: FILE: include/hw/usb/dwc2-regs.h:778:
+#define HCSPLT_XACTPOS_END^I^I1$
ERROR: code indent should never use tabs
#804: FILE: include/hw/usb/dwc2-regs.h:779:
+#define HCSPLT_XACTPOS_BEGIN^I^I2$
ERROR: code indent should never use tabs
#805: FILE: include/hw/usb/dwc2-regs.h:780:
+#define HCSPLT_XACTPOS_ALL^I^I3$
ERROR: code indent should never use tabs
#806: FILE: include/hw/usb/dwc2-regs.h:781:
+#define HCSPLT_HUBADDR_MASK^I^I(0x7f << 7)$
ERROR: code indent should never use tabs
#807: FILE: include/hw/usb/dwc2-regs.h:782:
+#define HCSPLT_HUBADDR_SHIFT^I^I7$
ERROR: code indent should never use tabs
#808: FILE: include/hw/usb/dwc2-regs.h:783:
+#define HCSPLT_PRTADDR_MASK^I^I(0x7f << 0)$
ERROR: code indent should never use tabs
#809: FILE: include/hw/usb/dwc2-regs.h:784:
+#define HCSPLT_PRTADDR_SHIFT^I^I0$
ERROR: code indent should never use tabs
#811: FILE: include/hw/usb/dwc2-regs.h:786:
+#define HCINT(_ch)^I^I^IHSOTG_REG(0x0508 + 0x20 * (_ch))$
ERROR: code indent should never use tabs
#812: FILE: include/hw/usb/dwc2-regs.h:787:
+#define HCINTMSK(_ch)^I^I^IHSOTG_REG(0x050c + 0x20 * (_ch))$
ERROR: code indent should never use tabs
#813: FILE: include/hw/usb/dwc2-regs.h:788:
+#define HCINTMSK_RESERVED14_31^I^I(0x3ffff << 14)$
ERROR: code indent should never use tabs
#814: FILE: include/hw/usb/dwc2-regs.h:789:
+#define HCINTMSK_FRM_LIST_ROLL^I^IBIT(13)$
ERROR: code indent should never use tabs
#815: FILE: include/hw/usb/dwc2-regs.h:790:
+#define HCINTMSK_XCS_XACT^I^IBIT(12)$
ERROR: code indent should never use tabs
#816: FILE: include/hw/usb/dwc2-regs.h:791:
+#define HCINTMSK_BNA^I^I^IBIT(11)$
ERROR: code indent should never use tabs
#817: FILE: include/hw/usb/dwc2-regs.h:792:
+#define HCINTMSK_DATATGLERR^I^IBIT(10)$
ERROR: code indent should never use tabs
#818: FILE: include/hw/usb/dwc2-regs.h:793:
+#define HCINTMSK_FRMOVRUN^I^IBIT(9)$
ERROR: code indent should never use tabs
#819: FILE: include/hw/usb/dwc2-regs.h:794:
+#define HCINTMSK_BBLERR^I^I^IBIT(8)$
ERROR: code indent should never use tabs
#820: FILE: include/hw/usb/dwc2-regs.h:795:
+#define HCINTMSK_XACTERR^I^IBIT(7)$
ERROR: code indent should never use tabs
#821: FILE: include/hw/usb/dwc2-regs.h:796:
+#define HCINTMSK_NYET^I^I^IBIT(6)$
ERROR: code indent should never use tabs
#822: FILE: include/hw/usb/dwc2-regs.h:797:
+#define HCINTMSK_ACK^I^I^IBIT(5)$
ERROR: code indent should never use tabs
#823: FILE: include/hw/usb/dwc2-regs.h:798:
+#define HCINTMSK_NAK^I^I^IBIT(4)$
ERROR: code indent should never use tabs
#824: FILE: include/hw/usb/dwc2-regs.h:799:
+#define HCINTMSK_STALL^I^I^IBIT(3)$
ERROR: code indent should never use tabs
#825: FILE: include/hw/usb/dwc2-regs.h:800:
+#define HCINTMSK_AHBERR^I^I^IBIT(2)$
ERROR: code indent should never use tabs
#826: FILE: include/hw/usb/dwc2-regs.h:801:
+#define HCINTMSK_CHHLTD^I^I^IBIT(1)$
ERROR: code indent should never use tabs
#827: FILE: include/hw/usb/dwc2-regs.h:802:
+#define HCINTMSK_XFERCOMPL^I^IBIT(0)$
ERROR: code indent should never use tabs
#829: FILE: include/hw/usb/dwc2-regs.h:804:
+#define HCTSIZ(_ch)^I^I^IHSOTG_REG(0x0510 + 0x20 * (_ch))$
ERROR: code indent should never use tabs
#830: FILE: include/hw/usb/dwc2-regs.h:805:
+#define TSIZ_DOPNG^I^I^IBIT(31)$
ERROR: code indent should never use tabs
#831: FILE: include/hw/usb/dwc2-regs.h:806:
+#define TSIZ_SC_MC_PID_MASK^I^I(0x3 << 29)$
ERROR: code indent should never use tabs
#832: FILE: include/hw/usb/dwc2-regs.h:807:
+#define TSIZ_SC_MC_PID_SHIFT^I^I29$
ERROR: code indent should never use tabs
#833: FILE: include/hw/usb/dwc2-regs.h:808:
+#define TSIZ_SC_MC_PID_DATA0^I^I0$
ERROR: code indent should never use tabs
#834: FILE: include/hw/usb/dwc2-regs.h:809:
+#define TSIZ_SC_MC_PID_DATA2^I^I1$
ERROR: code indent should never use tabs
#835: FILE: include/hw/usb/dwc2-regs.h:810:
+#define TSIZ_SC_MC_PID_DATA1^I^I2$
ERROR: code indent should never use tabs
#836: FILE: include/hw/usb/dwc2-regs.h:811:
+#define TSIZ_SC_MC_PID_MDATA^I^I3$
ERROR: code indent should never use tabs
#837: FILE: include/hw/usb/dwc2-regs.h:812:
+#define TSIZ_SC_MC_PID_SETUP^I^I3$
ERROR: code indent should never use tabs
#838: FILE: include/hw/usb/dwc2-regs.h:813:
+#define TSIZ_PKTCNT_MASK^I^I(0x3ff << 19)$
ERROR: code indent should never use tabs
#839: FILE: include/hw/usb/dwc2-regs.h:814:
+#define TSIZ_PKTCNT_SHIFT^I^I19$
ERROR: code indent should never use tabs
#840: FILE: include/hw/usb/dwc2-regs.h:815:
+#define TSIZ_NTD_MASK^I^I^I(0xff << 8)$
ERROR: code indent should never use tabs
#841: FILE: include/hw/usb/dwc2-regs.h:816:
+#define TSIZ_NTD_SHIFT^I^I^I8$
ERROR: code indent should never use tabs
#842: FILE: include/hw/usb/dwc2-regs.h:817:
+#define TSIZ_SCHINFO_MASK^I^I(0xff << 0)$
ERROR: code indent should never use tabs
#843: FILE: include/hw/usb/dwc2-regs.h:818:
+#define TSIZ_SCHINFO_SHIFT^I^I0$
ERROR: code indent should never use tabs
#844: FILE: include/hw/usb/dwc2-regs.h:819:
+#define TSIZ_XFERSIZE_MASK^I^I(0x7ffff << 0)$
ERROR: code indent should never use tabs
#845: FILE: include/hw/usb/dwc2-regs.h:820:
+#define TSIZ_XFERSIZE_SHIFT^I^I0$
ERROR: code indent should never use tabs
#847: FILE: include/hw/usb/dwc2-regs.h:822:
+#define HCDMA(_ch)^I^I^IHSOTG_REG(0x0514 + 0x20 * (_ch))$
ERROR: code indent should never use tabs
#849: FILE: include/hw/usb/dwc2-regs.h:824:
+#define HCDMAB(_ch)^I^I^IHSOTG_REG(0x051c + 0x20 * (_ch))$
ERROR: code indent should never use tabs
#851: FILE: include/hw/usb/dwc2-regs.h:826:
+#define HCFIFO(_ch)^I^I^IHSOTG_REG(0x1000 + 0x1000 * (_ch))$
ERROR: code indent should never use tabs
#864: FILE: include/hw/usb/dwc2-regs.h:839:
+^Iuint32_t status;$
ERROR: code indent should never use tabs
#865: FILE: include/hw/usb/dwc2-regs.h:840:
+^Iuint32_t buf;$
ERROR: code indent should never use tabs
#870: FILE: include/hw/usb/dwc2-regs.h:845:
+#define HOST_DMA_A^I^I^IBIT(31)$
ERROR: code indent should never use tabs
#871: FILE: include/hw/usb/dwc2-regs.h:846:
+#define HOST_DMA_STS_MASK^I^I(0x3 << 28)$
ERROR: code indent should never use tabs
#872: FILE: include/hw/usb/dwc2-regs.h:847:
+#define HOST_DMA_STS_SHIFT^I^I28$
ERROR: code indent should never use tabs
#873: FILE: include/hw/usb/dwc2-regs.h:848:
+#define HOST_DMA_STS_PKTERR^I^IBIT(28)$
ERROR: code indent should never use tabs
#874: FILE: include/hw/usb/dwc2-regs.h:849:
+#define HOST_DMA_EOL^I^I^IBIT(26)$
ERROR: code indent should never use tabs
#875: FILE: include/hw/usb/dwc2-regs.h:850:
+#define HOST_DMA_IOC^I^I^IBIT(25)$
ERROR: code indent should never use tabs
#876: FILE: include/hw/usb/dwc2-regs.h:851:
+#define HOST_DMA_SUP^I^I^IBIT(24)$
ERROR: code indent should never use tabs
#877: FILE: include/hw/usb/dwc2-regs.h:852:
+#define HOST_DMA_ALT_QTD^I^IBIT(23)$
ERROR: code indent should never use tabs
#878: FILE: include/hw/usb/dwc2-regs.h:853:
+#define HOST_DMA_QTD_OFFSET_MASK^I(0x3f << 17)$
ERROR: code indent should never use tabs
#879: FILE: include/hw/usb/dwc2-regs.h:854:
+#define HOST_DMA_QTD_OFFSET_SHIFT^I17$
ERROR: code indent should never use tabs
#880: FILE: include/hw/usb/dwc2-regs.h:855:
+#define HOST_DMA_ISOC_NBYTES_MASK^I(0xfff << 0)$
ERROR: code indent should never use tabs
#881: FILE: include/hw/usb/dwc2-regs.h:856:
+#define HOST_DMA_ISOC_NBYTES_SHIFT^I0$
ERROR: code indent should never use tabs
#882: FILE: include/hw/usb/dwc2-regs.h:857:
+#define HOST_DMA_NBYTES_MASK^I^I(0x1ffff << 0)$
ERROR: code indent should never use tabs
#883: FILE: include/hw/usb/dwc2-regs.h:858:
+#define HOST_DMA_NBYTES_SHIFT^I^I0$
ERROR: code indent should never use tabs
#884: FILE: include/hw/usb/dwc2-regs.h:859:
+#define HOST_DMA_NBYTES_LIMIT^I^I131071$
ERROR: code indent should never use tabs
#888: FILE: include/hw/usb/dwc2-regs.h:863:
+#define DEV_DMA_BUFF_STS_MASK^I^I(0x3 << 30)$
ERROR: code indent should never use tabs
#889: FILE: include/hw/usb/dwc2-regs.h:864:
+#define DEV_DMA_BUFF_STS_SHIFT^I^I30$
ERROR: code indent should never use tabs
#890: FILE: include/hw/usb/dwc2-regs.h:865:
+#define DEV_DMA_BUFF_STS_HREADY^I^I0$
ERROR: code indent should never use tabs
#891: FILE: include/hw/usb/dwc2-regs.h:866:
+#define DEV_DMA_BUFF_STS_DMABUSY^I1$
ERROR: code indent should never use tabs
#892: FILE: include/hw/usb/dwc2-regs.h:867:
+#define DEV_DMA_BUFF_STS_DMADONE^I2$
ERROR: code indent should never use tabs
#893: FILE: include/hw/usb/dwc2-regs.h:868:
+#define DEV_DMA_BUFF_STS_HBUSY^I^I3$
ERROR: code indent should never use tabs
#894: FILE: include/hw/usb/dwc2-regs.h:869:
+#define DEV_DMA_STS_MASK^I^I(0x3 << 28)$
ERROR: code indent should never use tabs
#895: FILE: include/hw/usb/dwc2-regs.h:870:
+#define DEV_DMA_STS_SHIFT^I^I28$
ERROR: code indent should never use tabs
#896: FILE: include/hw/usb/dwc2-regs.h:871:
+#define DEV_DMA_STS_SUCC^I^I0$
ERROR: code indent should never use tabs
#897: FILE: include/hw/usb/dwc2-regs.h:872:
+#define DEV_DMA_STS_BUFF_FLUSH^I^I1$
ERROR: code indent should never use tabs
#898: FILE: include/hw/usb/dwc2-regs.h:873:
+#define DEV_DMA_STS_BUFF_ERR^I^I3$
ERROR: code indent should never use tabs
#899: FILE: include/hw/usb/dwc2-regs.h:874:
+#define DEV_DMA_L^I^I^IBIT(27)$
ERROR: code indent should never use tabs
#900: FILE: include/hw/usb/dwc2-regs.h:875:
+#define DEV_DMA_SHORT^I^I^IBIT(26)$
ERROR: code indent should never use tabs
#901: FILE: include/hw/usb/dwc2-regs.h:876:
+#define DEV_DMA_IOC^I^I^IBIT(25)$
ERROR: code indent should never use tabs
#902: FILE: include/hw/usb/dwc2-regs.h:877:
+#define DEV_DMA_SR^I^I^IBIT(24)$
ERROR: code indent should never use tabs
#903: FILE: include/hw/usb/dwc2-regs.h:878:
+#define DEV_DMA_MTRF^I^I^IBIT(23)$
ERROR: code indent should never use tabs
#904: FILE: include/hw/usb/dwc2-regs.h:879:
+#define DEV_DMA_ISOC_PID_MASK^I^I(0x3 << 23)$
ERROR: code indent should never use tabs
#905: FILE: include/hw/usb/dwc2-regs.h:880:
+#define DEV_DMA_ISOC_PID_SHIFT^I^I23$
ERROR: code indent should never use tabs
#906: FILE: include/hw/usb/dwc2-regs.h:881:
+#define DEV_DMA_ISOC_PID_DATA0^I^I0$
ERROR: code indent should never use tabs
#907: FILE: include/hw/usb/dwc2-regs.h:882:
+#define DEV_DMA_ISOC_PID_DATA2^I^I1$
ERROR: code indent should never use tabs
#908: FILE: include/hw/usb/dwc2-regs.h:883:
+#define DEV_DMA_ISOC_PID_DATA1^I^I2$
ERROR: code indent should never use tabs
#909: FILE: include/hw/usb/dwc2-regs.h:884:
+#define DEV_DMA_ISOC_PID_MDATA^I^I3$
ERROR: code indent should never use tabs
#910: FILE: include/hw/usb/dwc2-regs.h:885:
+#define DEV_DMA_ISOC_FRNUM_MASK^I^I(0x7ff << 12)$
ERROR: code indent should never use tabs
#911: FILE: include/hw/usb/dwc2-regs.h:886:
+#define DEV_DMA_ISOC_FRNUM_SHIFT^I12$
ERROR: code indent should never use tabs
#912: FILE: include/hw/usb/dwc2-regs.h:887:
+#define DEV_DMA_ISOC_TX_NBYTES_MASK^I(0xfff << 0)$
ERROR: code indent should never use tabs
#913: FILE: include/hw/usb/dwc2-regs.h:888:
+#define DEV_DMA_ISOC_TX_NBYTES_LIMIT^I0xfff$
ERROR: code indent should never use tabs
#914: FILE: include/hw/usb/dwc2-regs.h:889:
+#define DEV_DMA_ISOC_RX_NBYTES_MASK^I(0x7ff << 0)$
ERROR: code indent should never use tabs
#915: FILE: include/hw/usb/dwc2-regs.h:890:
+#define DEV_DMA_ISOC_RX_NBYTES_LIMIT^I0x7ff$
ERROR: code indent should never use tabs
#916: FILE: include/hw/usb/dwc2-regs.h:891:
+#define DEV_DMA_ISOC_NBYTES_SHIFT^I0$
ERROR: code indent should never use tabs
#917: FILE: include/hw/usb/dwc2-regs.h:892:
+#define DEV_DMA_NBYTES_MASK^I^I(0xffff << 0)$
ERROR: code indent should never use tabs
#918: FILE: include/hw/usb/dwc2-regs.h:893:
+#define DEV_DMA_NBYTES_SHIFT^I^I0$
ERROR: code indent should never use tabs
#919: FILE: include/hw/usb/dwc2-regs.h:894:
+#define DEV_DMA_NBYTES_LIMIT^I^I0xffff$
ERROR: code indent should never use tabs
#921: FILE: include/hw/usb/dwc2-regs.h:896:
+#define MAX_DMA_DESC_NUM_GENERIC^I64$
ERROR: code indent should never use tabs
#922: FILE: include/hw/usb/dwc2-regs.h:897:
+#define MAX_DMA_DESC_NUM_HS_ISOC^I256$
total: 753 errors, 3 warnings, 899 lines checked
Patch 15/29 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
16/29 Checking commit 26ec4138d588 (dwc-hsotg (dwc2) USB host controller state definitions)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#17:
new file mode 100644
total: 0 errors, 1 warnings, 190 lines checked
Patch 16/29 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
17/29 Checking commit d6df0bcd83ac (dwc-hsotg (dwc2) USB host controller emulation)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#66:
new file mode 100644
total: 0 errors, 1 warnings, 1491 lines checked
Patch 17/29 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
18/29 Checking commit f9720e85e5d3 (usb: add short-packet handling to usb-storage driver)
19/29 Checking commit 2a56c0cabb41 (wire in the dwc-hsotg (dwc2) USB host controller emulation)
20/29 Checking commit 725f9e459f44 (raspi2 acceptance test: add test for dwc-hsotg (dwc2) USB host)
21/29 Checking commit 3daf1647a8b3 (target/arm: Convert Neon VSHL and VSLI 2-reg-shift insn to decodetree)
ERROR: spaces required around that '*' (ctx:WxV)
#57: FILE: target/arm/translate-neon.inc.c:1206:
+static bool do_vector_2sh(DisasContext *s, arg_2reg_shift *a, GVecGen2iFn *fn)
^
ERROR: spaces required around that '*' (ctx:WxV)
#87: FILE: target/arm/translate-neon.inc.c:1236:
+ static bool trans_##INSN##_2sh(DisasContext *s, arg_2reg_shift *a) \
^
total: 2 errors, 0 warnings, 99 lines checked
Patch 21/29 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
22/29 Checking commit 7e946c583157 (target/arm: Convert Neon VSHR 2-reg-shift insns to decodetree)
ERROR: spaces required around that '*' (ctx:WxV)
#94: FILE: target/arm/translate-neon.inc.c:1262:
+static bool trans_VSHR_S_2sh(DisasContext *s, arg_2reg_shift *a)
^
total: 1 errors, 0 warnings, 120 lines checked
Patch 22/29 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
23/29 Checking commit c0457fa632e7 (target/arm: Convert Neon VSRA, VSRI, VRSHR, VRSRA 2-reg-shift insns to decodetree)
24/29 Checking commit f0efe7163fde (target/arm: Convert VQSHLU, VQSHL 2-reg-shift insns to decodetree)
25/29 Checking commit 93549e817474 (target/arm: Convert Neon narrowing shifts with op==8 to decodetree)
26/29 Checking commit 0f4297947d88 (target/arm: Convert Neon narrowing shifts with op==9 to decodetree)
27/29 Checking commit 595e77ee5b7f (target/arm: Convert Neon VSHLL, VMOVL to decodetree)
28/29 Checking commit c07ebcb34b60 (target/arm: Convert VCVT fixed-point ops to decodetree)
29/29 Checking commit 8d19bb160420 (target/arm: Convert Neon one-register-and-immediate insns to decodetree)
=== OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/20200605165007.12095-1-peter.maydell@linaro.org/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 41+ messages in thread
* [PULL 00/29] target-arm queue
@ 2020-06-05 16:49 Peter Maydell
2020-06-05 20:10 ` no-reply
2020-06-08 10:04 ` Peter Maydell
0 siblings, 2 replies; 41+ messages in thread
From: Peter Maydell @ 2020-06-05 16:49 UTC (permalink / raw)
To: qemu-devel
Arm queue; some of the simpler stuff, things other have reviewed (thanks!), etc.
-- PMM
The following changes since commit 5d2f557b47dfbf8f23277a5bdd8473d4607c681a:
Merge remote-tracking branch 'remotes/kraxel/tags/vga-20200605-pull-request' into staging (2020-06-05 13:53:05 +0100)
are available in the Git repository at:
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200605
for you to fetch changes up to 2c35a39eda0b16c2ed85c94cec204bf5efb97812:
target/arm: Convert Neon one-register-and-immediate insns to decodetree (2020-06-05 17:23:10 +0100)
----------------------------------------------------------------
target-arm queue:
hw/ssi/imx_spi: Handle tx burst lengths other than 8 correctly
hw/input/pxa2xx_keypad: Replace hw_error() by qemu_log_mask()
hw/arm/pxa2xx: Replace printf() call by qemu_log_mask()
target/arm: Convert crypto insns to gvec
hw/adc/stm32f2xx_adc: Correct memory region size and access size
tests/acceptance: Add a boot test for the xlnx-versal-virt machine
docs/system: Document Aspeed boards
raspi: Add model of the USB controller
target/arm: Convert 2-reg-and-shift and 1-reg-imm Neon insns to decodetree
----------------------------------------------------------------
Cédric Le Goater (1):
docs/system: Document Aspeed boards
Eden Mikitas (2):
hw/ssi/imx_spi: changed while statement to prevent underflow
hw/ssi/imx_spi: Removed unnecessary cast of rx data received from slave
Paul Zimmerman (7):
raspi: add BCM2835 SOC MPHI emulation
dwc-hsotg (dwc2) USB host controller register definitions
dwc-hsotg (dwc2) USB host controller state definitions
dwc-hsotg (dwc2) USB host controller emulation
usb: add short-packet handling to usb-storage driver
wire in the dwc-hsotg (dwc2) USB host controller emulation
raspi2 acceptance test: add test for dwc-hsotg (dwc2) USB host
Peter Maydell (9):
target/arm: Convert Neon VSHL and VSLI 2-reg-shift insn to decodetree
target/arm: Convert Neon VSHR 2-reg-shift insns to decodetree
target/arm: Convert Neon VSRA, VSRI, VRSHR, VRSRA 2-reg-shift insns to decodetree
target/arm: Convert VQSHLU, VQSHL 2-reg-shift insns to decodetree
target/arm: Convert Neon narrowing shifts with op==8 to decodetree
target/arm: Convert Neon narrowing shifts with op==9 to decodetree
target/arm: Convert Neon VSHLL, VMOVL to decodetree
target/arm: Convert VCVT fixed-point ops to decodetree
target/arm: Convert Neon one-register-and-immediate insns to decodetree
Philippe Mathieu-Daudé (3):
hw/input/pxa2xx_keypad: Replace hw_error() by qemu_log_mask()
hw/arm/pxa2xx: Replace printf() call by qemu_log_mask()
hw/adc/stm32f2xx_adc: Correct memory region size and access size
Richard Henderson (6):
target/arm: Convert aes and sm4 to gvec helpers
target/arm: Convert rax1 to gvec helpers
target/arm: Convert sha512 and sm3 to gvec helpers
target/arm: Convert sha1 and sha256 to gvec helpers
target/arm: Split helper_crypto_sha1_3reg
target/arm: Split helper_crypto_sm3tt
Thomas Huth (1):
tests/acceptance: Add a boot test for the xlnx-versal-virt machine
docs/system/arm/aspeed.rst | 85 ++
docs/system/target-arm.rst | 1 +
hw/usb/hcd-dwc2.h | 190 +++++
include/hw/arm/bcm2835_peripherals.h | 5 +-
include/hw/misc/bcm2835_mphi.h | 44 +
include/hw/usb/dwc2-regs.h | 899 ++++++++++++++++++++
target/arm/helper.h | 45 +-
target/arm/translate-a64.h | 3 +
target/arm/vec_internal.h | 33 +
target/arm/neon-dp.decode | 214 ++++-
hw/adc/stm32f2xx_adc.c | 4 +-
hw/arm/bcm2835_peripherals.c | 38 +-
hw/arm/pxa2xx.c | 66 +-
hw/input/pxa2xx_keypad.c | 10 +-
hw/misc/bcm2835_mphi.c | 191 +++++
hw/ssi/imx_spi.c | 4 +-
hw/usb/dev-storage.c | 15 +-
hw/usb/hcd-dwc2.c | 1417 ++++++++++++++++++++++++++++++++
target/arm/crypto_helper.c | 267 ++++--
target/arm/translate-a64.c | 198 ++---
target/arm/translate-neon.inc.c | 796 ++++++++++++++----
target/arm/translate.c | 539 +-----------
target/arm/vec_helper.c | 12 +-
hw/misc/Makefile.objs | 1 +
hw/usb/Kconfig | 5 +
hw/usb/Makefile.objs | 1 +
hw/usb/trace-events | 50 ++
tests/acceptance/boot_linux_console.py | 35 +-
28 files changed, 4258 insertions(+), 910 deletions(-)
create mode 100644 docs/system/arm/aspeed.rst
create mode 100644 hw/usb/hcd-dwc2.h
create mode 100644 include/hw/misc/bcm2835_mphi.h
create mode 100644 include/hw/usb/dwc2-regs.h
create mode 100644 target/arm/vec_internal.h
create mode 100644 hw/misc/bcm2835_mphi.c
create mode 100644 hw/usb/hcd-dwc2.c
^ permalink raw reply [flat|nested] 41+ messages in thread
* [PULL 00/29] target-arm queue
@ 2020-05-21 19:15 Peter Maydell
0 siblings, 0 replies; 41+ messages in thread
From: Peter Maydell @ 2020-05-21 19:15 UTC (permalink / raw)
To: qemu-devel
target-arm queue: nothing big, just a collection of minor things.
-- PMM
The following changes since commit ae3aa5da96f4ccf0c2a28851449d92db9fcfad71:
Merge remote-tracking branch 'remotes/berrange/tags/socket-next-pull-request' into staging (2020-05-21 16:47:28 +0100)
are available in the Git repository at:
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200521
for you to fetch changes up to 17b5df7b65d0192c5d775b5e1581518580774c77:
linux-user/arm/signal.c: Drop TARGET_CONFIG_CPU_32 (2020-05-21 20:00:19 +0100)
----------------------------------------------------------------
target-arm queue:
* tests/acceptance: Add a test for the canon-a1100 machine
* docs/system: Document some of the Arm development boards
* linux-user: make BKPT insn cause SIGTRAP, not be a syscall
* target/arm: Remove unused GEN_NEON_INTEGER_OP macro
* fsl-imx25, fsl-imx31, fsl-imx6, fsl-imx6ul, fsl-imx7: implement watchdog
* hw/arm: Use qemu_log_mask() instead of hw_error() in various places
* ARM: PL061: Introduce N_GPIOS
* target/arm: Improve clear_vec_high() usage
* target/arm: Allow user-mode code to write CPSR.E via MSR
* linux-user/arm: Reset CPSR_E when entering a signal handler
* linux-user/arm/signal.c: Drop TARGET_CONFIG_CPU_32
----------------------------------------------------------------
Amanieu d'Antras (1):
linux-user/arm: Reset CPSR_E when entering a signal handler
Geert Uytterhoeven (1):
ARM: PL061: Introduce N_GPIOS
Guenter Roeck (8):
hw: Move i.MX watchdog driver to hw/watchdog
hw/watchdog: Implement full i.MX watchdog support
hw/arm/fsl-imx25: Wire up watchdog
hw/arm/fsl-imx31: Wire up watchdog
hw/arm/fsl-imx6: Connect watchdog interrupts
hw/arm/fsl-imx6ul: Connect watchdog interrupts
hw/arm/fsl-imx7: Instantiate various unimplemented devices
hw/arm/fsl-imx7: Connect watchdog interrupts
Peter Maydell (12):
docs/system: Add 'Arm' to the Integrator/CP document title
docs/system: Sort Arm board index into alphabetical order
docs/system: Document Arm Versatile Express boards
docs/system: Document the various MPS2 models
docs/system: Document Musca boards
linux-user/arm: BKPT should cause SIGTRAP, not be a syscall
linux-user/arm: Remove bogus SVC 0xf0002 handling
linux-user/arm: Handle invalid arm-specific syscalls correctly
linux-user/arm: Fix identification of syscall numbers
target/arm: Remove unused GEN_NEON_INTEGER_OP macro
target/arm: Allow user-mode code to write CPSR.E via MSR
linux-user/arm/signal.c: Drop TARGET_CONFIG_CPU_32
Philippe Mathieu-Daudé (4):
hw/arm/integratorcp: Replace hw_error() by qemu_log_mask()
hw/arm/pxa2xx: Replace hw_error() by qemu_log_mask()
hw/char/xilinx_uartlite: Replace hw_error() by qemu_log_mask()
hw/timer/exynos4210_mct: Replace hw_error() by qemu_log_mask()
Richard Henderson (2):
target/arm: Use tcg_gen_gvec_mov for clear_vec_high
target/arm: Use clear_vec_high more effectively
Thomas Huth (1):
tests/acceptance: Add a test for the canon-a1100 machine
docs/system/arm/integratorcp.rst | 4 +-
docs/system/arm/mps2.rst | 29 +++
docs/system/arm/musca.rst | 31 +++
docs/system/arm/vexpress.rst | 60 ++++++
docs/system/target-arm.rst | 20 +-
include/hw/arm/fsl-imx25.h | 5 +
include/hw/arm/fsl-imx31.h | 4 +
include/hw/arm/fsl-imx6.h | 2 +-
include/hw/arm/fsl-imx6ul.h | 2 +-
include/hw/arm/fsl-imx7.h | 23 ++-
include/hw/misc/imx2_wdt.h | 33 ----
include/hw/watchdog/wdt_imx2.h | 90 +++++++++
target/arm/cpu.h | 2 +-
hw/arm/fsl-imx25.c | 10 +
hw/arm/fsl-imx31.c | 6 +
hw/arm/fsl-imx6.c | 9 +
hw/arm/fsl-imx6ul.c | 10 +
hw/arm/fsl-imx7.c | 35 ++++
hw/arm/integratorcp.c | 23 ++-
hw/arm/pxa2xx_gpio.c | 7 +-
hw/char/xilinx_uartlite.c | 5 +-
hw/display/pxa2xx_lcd.c | 8 +-
hw/dma/pxa2xx_dma.c | 14 +-
hw/gpio/pl061.c | 12 +-
hw/misc/imx2_wdt.c | 90 ---------
hw/timer/exynos4210_mct.c | 12 +-
hw/watchdog/wdt_imx2.c | 303 +++++++++++++++++++++++++++++
linux-user/arm/cpu_loop.c | 145 ++++++++------
linux-user/arm/signal.c | 15 +-
target/arm/translate-a64.c | 63 +++---
target/arm/translate.c | 23 ---
MAINTAINERS | 6 +
hw/arm/Kconfig | 5 +
hw/misc/Makefile.objs | 1 -
hw/watchdog/Kconfig | 3 +
hw/watchdog/Makefile.objs | 1 +
tests/acceptance/machine_arm_canona1100.py | 35 ++++
37 files changed, 854 insertions(+), 292 deletions(-)
create mode 100644 docs/system/arm/mps2.rst
create mode 100644 docs/system/arm/musca.rst
create mode 100644 docs/system/arm/vexpress.rst
delete mode 100644 include/hw/misc/imx2_wdt.h
create mode 100644 include/hw/watchdog/wdt_imx2.h
delete mode 100644 hw/misc/imx2_wdt.c
create mode 100644 hw/watchdog/wdt_imx2.c
create mode 100644 tests/acceptance/machine_arm_canona1100.py
^ permalink raw reply [flat|nested] 41+ messages in thread
end of thread, other threads:[~2023-05-22 10:29 UTC | newest]
Thread overview: 41+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-05-18 12:50 [PULL 00/29] target-arm queue Peter Maydell
2023-05-18 12:50 ` [PULL 01/29] sbsa-ref: switch default cpu core to Neoverse-N1 Peter Maydell
2023-05-18 12:50 ` [PULL 02/29] target/arm: Fix vd == vm overlap in sve_ldff1_z Peter Maydell
2023-05-18 12:50 ` [PULL 03/29] Maintainers: add myself as reviewer for sbsa-ref Peter Maydell
2023-05-18 12:50 ` [PULL 04/29] arm/kvm: add support for MTE Peter Maydell
2023-05-19 12:51 ` Alex Bennée
2023-05-19 13:31 ` Peter Maydell
2023-05-19 14:52 ` Peter Maydell
2023-05-22 9:48 ` Cornelia Huck
2023-05-22 10:12 ` Alex Bennée
2023-05-18 12:50 ` [PULL 05/29] target/arm: add RAZ/WI handling for DBGDTR[TX|RX] Peter Maydell
2023-05-18 12:50 ` [PULL 06/29] sbsa-ref: use Bochs graphics card instead of VGA Peter Maydell
2023-05-18 12:50 ` [PULL 07/29] target/arm: Split out disas_a64_legacy Peter Maydell
2023-05-18 12:50 ` [PULL 08/29] target/arm: Create decodetree skeleton for A64 Peter Maydell
2023-05-18 12:50 ` [PULL 09/29] target/arm: Pull calls to disas_sve() and disas_sme() out of legacy decoder Peter Maydell
2023-05-18 12:50 ` [PULL 10/29] target/arm: Convert PC-rel addressing to decodetree Peter Maydell
2023-05-18 12:50 ` [PULL 11/29] target/arm: Split gen_add_CC and gen_sub_CC Peter Maydell
2023-05-18 12:50 ` [PULL 12/29] target/arm: Convert Add/subtract (immediate) to decodetree Peter Maydell
2023-05-18 12:50 ` [PULL 13/29] target/arm: Convert Add/subtract (immediate with tags) " Peter Maydell
2023-05-18 12:50 ` [PULL 14/29] target/arm: Replace bitmask64 with MAKE_64BIT_MASK Peter Maydell
2023-05-18 12:50 ` [PULL 15/29] target/arm: Convert Logical (immediate) to decodetree Peter Maydell
2023-05-18 12:50 ` [PULL 16/29] target/arm: Convert Move wide " Peter Maydell
2023-05-18 12:50 ` [PULL 17/29] target/arm: Convert Bitfield " Peter Maydell
2023-05-18 12:50 ` [PULL 18/29] target/arm: Convert Extract instructions " Peter Maydell
2023-05-18 12:50 ` [PULL 19/29] target/arm: Convert unconditional branch immediate " Peter Maydell
2023-05-18 12:50 ` [PULL 20/29] target/arm: Convert CBZ, CBNZ " Peter Maydell
2023-05-18 12:50 ` [PULL 21/29] target/arm: Convert TBZ, TBNZ " Peter Maydell
2023-05-18 12:51 ` [PULL 22/29] target/arm: Convert conditional branch insns " Peter Maydell
2023-05-18 12:51 ` [PULL 23/29] target/arm: Convert BR, BLR, RET " Peter Maydell
2023-05-18 12:51 ` [PULL 24/29] target/arm: Convert BRA[AB]Z, BLR[AB]Z, RETA[AB] " Peter Maydell
2023-05-18 12:51 ` [PULL 25/29] target/arm: Convert BRAA, BRAB, BLRAA, BLRAB " Peter Maydell
2023-05-18 12:51 ` [PULL 26/29] target/arm: Convert ERET, ERETAA, ERETAB " Peter Maydell
2023-05-18 12:51 ` [PULL 27/29] target/arm: Saturate L2CTLR_EL1 core count field rather than overflowing Peter Maydell
2023-05-18 12:51 ` [PULL 28/29] hw/arm/vexpress: Avoid trivial memory leak of 'flashalias' Peter Maydell
2023-05-18 12:51 ` [PULL 29/29] docs: Convert u2f.txt to rST Peter Maydell
2023-05-18 14:51 ` [PULL 00/29] target-arm queue Richard Henderson
-- strict thread matches above, loose matches on Subject: below --
2022-12-15 12:49 Peter Maydell
2020-06-05 16:49 Peter Maydell
2020-06-05 20:10 ` no-reply
2020-06-08 10:04 ` Peter Maydell
2020-05-21 19:15 Peter Maydell
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.