All of lore.kernel.org
 help / color / mirror / Atom feed
From: Richard Zhu <hongxing.zhu@nxp.com>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: "l.stach@pengutronix.de" <l.stach@pengutronix.de>,
	"bhelgaas@google.com" <bhelgaas@google.com>,
	"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	dl-linux-imx <linux-imx@nxp.com>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"kernel@pengutronix.de" <kernel@pengutronix.de>
Subject: RE: [RESEND v2 4/5] PCI: imx6: Fix the clock reference handling unbalance when link never came up
Date: Tue, 19 Oct 2021 07:45:48 +0000	[thread overview]
Message-ID: <AS8PR04MB86761BC77B442F8BB604FB898CBD9@AS8PR04MB8676.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <20211015184943.GA2139079@bhelgaas>

> -----Original Message-----
> From: Bjorn Helgaas <helgaas@kernel.org>
> Sent: Saturday, October 16, 2021 2:50 AM
> To: Richard Zhu <hongxing.zhu@nxp.com>
> Cc: l.stach@pengutronix.de; bhelgaas@google.com;
> lorenzo.pieralisi@arm.com; linux-pci@vger.kernel.org; dl-linux-imx
> <linux-imx@nxp.com>; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; kernel@pengutronix.de
> Subject: Re: [RESEND v2 4/5] PCI: imx6: Fix the clock reference handling
> unbalance when link never came up
> 
> On Fri, Oct 15, 2021 at 02:05:40PM +0800, Richard Zhu wrote:
> > When link never came up, driver probe would be failed with error -110.
> > To keep usage counter balance of the clocks, disable the previous
> > enabled clocks when link is down.
> > Move definitions of the imx6_pcie_clk_disable() function to the proper
> > place. Because it wouldn't be used in imx6_pcie_suspend_noirq() only.
> 
> Add blank line between paragraphs.
> 
> Can you please split this into two patches:
> 
>   1) the imx6_pcie_clk_disable() move
>   2) the actual fix
> 
> It's hard to tell exactly where the fix is when things are mixed together.
> 
[Richard Zhu] Okay, would split this patch into two patches later.
One is used for imx6_pcie_clk_disable() move, and no function changes.
The other one is the actual fix. Thanks.

Best Regards
Richard Zhu

> > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> > ---
> >  drivers/pci/controller/dwc/pci-imx6.c | 47
> > ++++++++++++++-------------
> >  1 file changed, 24 insertions(+), 23 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pci-imx6.c
> > b/drivers/pci/controller/dwc/pci-imx6.c
> > index cc837f8bf6d4..d6a5d99ffa52 100644
> > --- a/drivers/pci/controller/dwc/pci-imx6.c
> > +++ b/drivers/pci/controller/dwc/pci-imx6.c
> > @@ -514,6 +514,29 @@ static int imx6_pcie_clk_enable(struct imx6_pcie
> *imx6_pcie)
> >  	return ret;
> >  }
> >
> > +static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie) {
> > +	clk_disable_unprepare(imx6_pcie->pcie);
> > +	clk_disable_unprepare(imx6_pcie->pcie_phy);
> > +	clk_disable_unprepare(imx6_pcie->pcie_bus);
> > +
> > +	switch (imx6_pcie->drvdata->variant) {
> > +	case IMX6SX:
> > +		clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
> > +		break;
> > +	case IMX7D:
> > +		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> > +				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
> > +				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
> > +		break;
> > +	case IMX8MQ:
> > +		clk_disable_unprepare(imx6_pcie->pcie_aux);
> > +		break;
> > +	default:
> > +		break;
> > +	}
> > +}
> > +
> >  static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie
> > *imx6_pcie)  {
> >  	u32 val;
> > @@ -853,6 +876,7 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
> >  		dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
> >  		dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
> >  	imx6_pcie_reset_phy(imx6_pcie);
> > +	imx6_pcie_clk_disable(imx6_pcie);
> >  	if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0)
> >  		regulator_disable(imx6_pcie->vpcie);
> >  	return ret;
> > @@ -941,29 +965,6 @@ static void imx6_pcie_pm_turnoff(struct
> imx6_pcie *imx6_pcie)
> >  	usleep_range(1000, 10000);
> >  }
> >
> > -static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie) -{
> > -	clk_disable_unprepare(imx6_pcie->pcie);
> > -	clk_disable_unprepare(imx6_pcie->pcie_phy);
> > -	clk_disable_unprepare(imx6_pcie->pcie_bus);
> > -
> > -	switch (imx6_pcie->drvdata->variant) {
> > -	case IMX6SX:
> > -		clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
> > -		break;
> > -	case IMX7D:
> > -		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> > -				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
> > -				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
> > -		break;
> > -	case IMX8MQ:
> > -		clk_disable_unprepare(imx6_pcie->pcie_aux);
> > -		break;
> > -	default:
> > -		break;
> > -	}
> > -}
> > -
> >  static int imx6_pcie_suspend_noirq(struct device *dev)  {
> >  	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
> > --
> > 2.25.1
> >

WARNING: multiple messages have this Message-ID (diff)
From: Richard Zhu <hongxing.zhu@nxp.com>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: "l.stach@pengutronix.de" <l.stach@pengutronix.de>,
	"bhelgaas@google.com" <bhelgaas@google.com>,
	"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	dl-linux-imx <linux-imx@nxp.com>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"kernel@pengutronix.de" <kernel@pengutronix.de>
Subject: RE: [RESEND v2 4/5] PCI: imx6: Fix the clock reference handling unbalance when link never came up
Date: Tue, 19 Oct 2021 07:45:48 +0000	[thread overview]
Message-ID: <AS8PR04MB86761BC77B442F8BB604FB898CBD9@AS8PR04MB8676.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <20211015184943.GA2139079@bhelgaas>

> -----Original Message-----
> From: Bjorn Helgaas <helgaas@kernel.org>
> Sent: Saturday, October 16, 2021 2:50 AM
> To: Richard Zhu <hongxing.zhu@nxp.com>
> Cc: l.stach@pengutronix.de; bhelgaas@google.com;
> lorenzo.pieralisi@arm.com; linux-pci@vger.kernel.org; dl-linux-imx
> <linux-imx@nxp.com>; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; kernel@pengutronix.de
> Subject: Re: [RESEND v2 4/5] PCI: imx6: Fix the clock reference handling
> unbalance when link never came up
> 
> On Fri, Oct 15, 2021 at 02:05:40PM +0800, Richard Zhu wrote:
> > When link never came up, driver probe would be failed with error -110.
> > To keep usage counter balance of the clocks, disable the previous
> > enabled clocks when link is down.
> > Move definitions of the imx6_pcie_clk_disable() function to the proper
> > place. Because it wouldn't be used in imx6_pcie_suspend_noirq() only.
> 
> Add blank line between paragraphs.
> 
> Can you please split this into two patches:
> 
>   1) the imx6_pcie_clk_disable() move
>   2) the actual fix
> 
> It's hard to tell exactly where the fix is when things are mixed together.
> 
[Richard Zhu] Okay, would split this patch into two patches later.
One is used for imx6_pcie_clk_disable() move, and no function changes.
The other one is the actual fix. Thanks.

Best Regards
Richard Zhu

> > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> > ---
> >  drivers/pci/controller/dwc/pci-imx6.c | 47
> > ++++++++++++++-------------
> >  1 file changed, 24 insertions(+), 23 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pci-imx6.c
> > b/drivers/pci/controller/dwc/pci-imx6.c
> > index cc837f8bf6d4..d6a5d99ffa52 100644
> > --- a/drivers/pci/controller/dwc/pci-imx6.c
> > +++ b/drivers/pci/controller/dwc/pci-imx6.c
> > @@ -514,6 +514,29 @@ static int imx6_pcie_clk_enable(struct imx6_pcie
> *imx6_pcie)
> >  	return ret;
> >  }
> >
> > +static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie) {
> > +	clk_disable_unprepare(imx6_pcie->pcie);
> > +	clk_disable_unprepare(imx6_pcie->pcie_phy);
> > +	clk_disable_unprepare(imx6_pcie->pcie_bus);
> > +
> > +	switch (imx6_pcie->drvdata->variant) {
> > +	case IMX6SX:
> > +		clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
> > +		break;
> > +	case IMX7D:
> > +		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> > +				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
> > +				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
> > +		break;
> > +	case IMX8MQ:
> > +		clk_disable_unprepare(imx6_pcie->pcie_aux);
> > +		break;
> > +	default:
> > +		break;
> > +	}
> > +}
> > +
> >  static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie
> > *imx6_pcie)  {
> >  	u32 val;
> > @@ -853,6 +876,7 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
> >  		dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
> >  		dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
> >  	imx6_pcie_reset_phy(imx6_pcie);
> > +	imx6_pcie_clk_disable(imx6_pcie);
> >  	if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0)
> >  		regulator_disable(imx6_pcie->vpcie);
> >  	return ret;
> > @@ -941,29 +965,6 @@ static void imx6_pcie_pm_turnoff(struct
> imx6_pcie *imx6_pcie)
> >  	usleep_range(1000, 10000);
> >  }
> >
> > -static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie) -{
> > -	clk_disable_unprepare(imx6_pcie->pcie);
> > -	clk_disable_unprepare(imx6_pcie->pcie_phy);
> > -	clk_disable_unprepare(imx6_pcie->pcie_bus);
> > -
> > -	switch (imx6_pcie->drvdata->variant) {
> > -	case IMX6SX:
> > -		clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
> > -		break;
> > -	case IMX7D:
> > -		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> > -				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
> > -				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
> > -		break;
> > -	case IMX8MQ:
> > -		clk_disable_unprepare(imx6_pcie->pcie_aux);
> > -		break;
> > -	default:
> > -		break;
> > -	}
> > -}
> > -
> >  static int imx6_pcie_suspend_noirq(struct device *dev)  {
> >  	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
> > --
> > 2.25.1
> >

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-10-19  7:45 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-15  6:05 [RESEND v2 0/5] PCI: imx6: refine codes and add compliance tests mode support Richard Zhu
2021-10-15  6:05 ` Richard Zhu
2021-10-15  6:05 ` [RESEND v2 1/5] PCI: imx6: Encapsulate the clock enable into one standalone function Richard Zhu
2021-10-15  6:05   ` Richard Zhu
2021-10-15 18:13   ` Lucas Stach
2021-10-15 18:13     ` Lucas Stach
2021-10-19  7:32     ` Richard Zhu
2021-10-19  7:32       ` Richard Zhu
2021-10-15  6:05 ` [RESEND v2 2/5] PCI: imx6: Add the error propagation from host_init Richard Zhu
2021-10-15  6:05   ` Richard Zhu
2021-10-15 18:16   ` Lucas Stach
2021-10-15 18:16     ` Lucas Stach
2021-10-19  7:33     ` Richard Zhu
2021-10-19  7:33       ` Richard Zhu
2021-10-15  6:05 ` [RESEND v2 3/5] PCI: imx6: Fix the regulator dump when link never came up Richard Zhu
2021-10-15  6:05   ` Richard Zhu
2021-10-15 18:22   ` Lucas Stach
2021-10-15 18:22     ` Lucas Stach
2021-10-19  7:39     ` Richard Zhu
2021-10-19  7:39       ` Richard Zhu
2021-10-20  3:22       ` Richard Zhu
2021-10-20  3:22         ` Richard Zhu
2021-10-15 18:34   ` Fabio Estevam
2021-10-15 18:34     ` Fabio Estevam
2021-10-19  7:44     ` Richard Zhu
2021-10-19  7:44       ` Richard Zhu
2021-10-15  6:05 ` [RESEND v2 4/5] PCI: imx6: Fix the clock reference handling unbalance " Richard Zhu
2021-10-15  6:05   ` Richard Zhu
2021-10-15 18:24   ` Lucas Stach
2021-10-15 18:24     ` Lucas Stach
2021-10-19  7:43     ` Richard Zhu
2021-10-19  7:43       ` Richard Zhu
2021-10-15 18:49   ` Bjorn Helgaas
2021-10-15 18:49     ` Bjorn Helgaas
2021-10-15 18:51     ` Bjorn Helgaas
2021-10-15 18:51       ` Bjorn Helgaas
2021-10-19  7:56       ` Richard Zhu
2021-10-19  7:56         ` Richard Zhu
2021-10-22  8:02         ` Richard Zhu
2021-10-22  8:02           ` Richard Zhu
2021-10-23  9:53           ` Krzysztof Wilczyński
2021-10-23  9:53             ` Krzysztof Wilczyński
2021-10-25  2:35             ` Richard Zhu
2021-10-25  2:35               ` Richard Zhu
2021-10-26 22:21               ` Bjorn Helgaas
2021-10-26 22:21                 ` Bjorn Helgaas
2021-10-27  1:30                 ` Richard Zhu
2021-10-27  1:30                   ` Richard Zhu
2021-10-26 16:38           ` Bjorn Helgaas
2021-10-26 16:38             ` Bjorn Helgaas
2021-10-27  1:29             ` Richard Zhu
2021-10-27  1:29               ` Richard Zhu
2021-10-19  7:45     ` Richard Zhu [this message]
2021-10-19  7:45       ` Richard Zhu
2021-10-15  6:05 ` [RESEND v2 5/5] PCI: imx6: Add the compliance tests mode support Richard Zhu
2021-10-15  6:05   ` Richard Zhu
2021-10-15 18:28   ` Lucas Stach
2021-10-15 18:28     ` Lucas Stach
2021-10-19  8:12     ` Richard Zhu
2021-10-19  8:12       ` Richard Zhu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AS8PR04MB86761BC77B442F8BB604FB898CBD9@AS8PR04MB8676.eurprd04.prod.outlook.com \
    --to=hongxing.zhu@nxp.com \
    --cc=bhelgaas@google.com \
    --cc=helgaas@kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.