Re: [PATCH 1/9] dt-bindings: display: renesas,du: Document r8a774e1 bindings

["Lad, Prabhakar" <prabhakar.csengg@gmail.com>]

Hi Geert,

Thank you for the review.

On Thu, Aug 13, 2020 at 10:05 AM Geert Uytterhoeven
<geert@linux-m68k.org> wrote:
>
> Hi Prabhakar, Laurent, Kieran,
>
> On Wed, Aug 12, 2020 at 4:02 PM Lad Prabhakar
> <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> > From: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
> >
> > Document the RZ/G2H (a.k.a. r8a774e1) SoC in the R-Car DU bindings.
> >
> > Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> >  Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
> > index 51cd4d162770..67cded5ad827 100644
> > --- a/Documentation/devicetree/bindings/display/renesas,du.txt
> > +++ b/Documentation/devicetree/bindings/display/renesas,du.txt
> > @@ -10,6 +10,7 @@ Required Properties:
> >      - "renesas,du-r8a774a1" for R8A774A1 (RZ/G2M) compatible DU
> >      - "renesas,du-r8a774b1" for R8A774B1 (RZ/G2N) compatible DU
> >      - "renesas,du-r8a774c0" for R8A774C0 (RZ/G2E) compatible DU
> > +    - "renesas,du-r8a774e1" for R8A774E1 (RZ/G2H) compatible DU
> >      - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
> >      - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
> >      - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU
> > @@ -75,6 +76,7 @@ corresponding to each DU output.
> >   R8A774A1 (RZ/G2M)      DPAD 0         HDMI 0         LVDS 0         -
> >   R8A774B1 (RZ/G2N)      DPAD 0         HDMI 0         LVDS 0         -
> >   R8A774C0 (RZ/G2E)      DPAD 0         LVDS 0         LVDS 1         -
> > + R8A774E1 (RZ/G2H)      DPAD 0         HDMI 0         LVDS 0         -
>
> As LVDS 0 is the fourth channel (DU3), should it be listed under port 3
> instead of port 2?
>
> I know we did it the same for R-Car M3-N and RZ/G2N.
> But my main worry is adding support for R-Car H3-N later.
>
I do agree too, with the below diff I tested the LVDS output on RZ/G2N
Rev2 board and things work fine. But only thing it doesn't explain is
why does LVDS work on DU2 for G2[H/N] boards :D

Geert, Laurent, Kieran If you agree with the below changes I shall
post a proper patch fixing it for RZ/G2[HN]

diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index d661724fc28a..0b087d287202 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -2540,8 +2540,8 @@
                                                remote-endpoint =
<&dw_hdmi0_in>;
                                        };
                                };
-                               port@2 {
-                                       reg = <2>;
+                               port@3 {
+                                       reg = <3>;
                                        du_out_lvds0: endpoint {
                                                remote-endpoint = <&lvds0_in>;
                                        };
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index 3e67cf70f040..419d81c7763e 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -153,7 +153,7 @@ static const struct rcar_du_device_info
rcar_du_r8a774b1_info = {
                },
                [RCAR_DU_OUTPUT_LVDS0] = {
                        .possible_crtcs = BIT(0),
-                       .port = 2,
+                       .port = 3,
                },
        },
        .num_lvds = 1,

Cheers,
Prabhakar


> >   R8A7779 (R-Car H1)     DPAD 0         DPAD 1         -              -
> >   R8A7790 (R-Car H2)     DPAD 0         LVDS 0         LVDS 1         -
> >   R8A7791 (R-Car M2-W)   DPAD 0         LVDS 0         -              -
>
> Apart from that:
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
>
> {oetje,eeting}s,
>
>                         Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds