From: Moritz Fischer <firstname.lastname@example.org>
To: Alan Tull <email@example.com>
Cc: "Nadathur, Sundar" <firstname.lastname@example.org>,
"Yves Vandervennet" <email@example.com>,
"Jason Gunthorpe" <firstname.lastname@example.org>,
"Marek Vašut" <email@example.com>
Subject: Re: [RFC 7/8] fpga-region: add sysfs interface
Date: Mon, 20 Feb 2017 15:49:47 -0800 [thread overview]
Message-ID: <CAAtXAHd5C4yz3s0WZBL_YKjhwEEntbowsvfg1GUdRDbnqfirstname.lastname@example.org> (raw)
On Sun, Feb 19, 2017 at 3:16 PM, Alan Tull <email@example.com> wrote:
> On Sun, Feb 19, 2017 at 9:00 AM, Alan Tull <firstname.lastname@example.org> wrote:
>> On Sat, Feb 18, 2017 at 2:45 PM, Moritz Fischer
>> <email@example.com> wrote:
>>> On Sat, Feb 18, 2017 at 02:10:43PM -0600, Alan Tull wrote:
>>>> On Sat, Feb 18, 2017 at 6:45 AM, Nadathur, Sundar
>>>> <firstname.lastname@example.org> wrote:
>>>> > Hi all,
>>>> > Interesting discussion. The discussion so far has brought out many concerns such as OS independence. There is an existing format, well-known to developers, with widespread support, and which is quite extensible: Type-Length-Value triples.
>>>> > To elaborate, a TLV-based format has many advantages:
>>>> > * It is highly extensible in many ways
>>>> > -- You can express structures and arrays using TLVs. Our needs right now may seem limited but requirements grow over time.
>> Device tree can express arrays.
>>>> > -- The space of Type values can be decomposed into standard pre-defined values that are in upstreamed code, and possibly experimental or feature-specific values.
>>>> > -- Forward compatibility: We can write parsers that can skip unexpected type values, thus allowing old parsers to work with new additions. With some tweaks, old parsers can also reject unexpected values in some ranges while accepting them in other ranges.
>>>> > * It is OS-independent.
>>>> > * It can be easily parsed, in kernel or user space.
>>> Are there other users of the format? I have to admit I didn't look very
>>> long, but couldn't find any libs / existing code at a first glance.
>> Is there a standard you are looking at? Have you seen any use of TLV's
>> in the Linux kernel you could point to?
>>>> > * It can be validated, in terms of Type values, acceptable lengths, etc.
>>>> > It is not directly human-readable but that can be easily addressed with a tool that parses TLVs.
>>>> > Compared to some other proposals:
>>>> > * Compared to DTs, TLVs are OS-independent.
>>> That's just alternative facts here. Just because Linux uses fdt for
>>> devicetree blobs it is *not* OS dependent. There are several (see
>>> last email) non-Linux users of fdt / libfdt.
>> It is worth repeating that libdtc is GPL/BSD with the intent of
>> allowing proprietary code to use libdtc. So license shouldn't be a barrier.
>> Using device tree in the header would give us a way of doing enumeration at
>> least for Linux, not sure if that kind of info can be used in Windows
>> in some way.
> Actually, enumeration is the only advantage I see with DT.
Which seems to some point a separate issue to passing in image
specific info such as
encrypted or not, compressed or not or build info metadata.
So I think in general we can still separate this out into:
- Image specific values
- Reconfiguration specific values
> Currently I like key/value pairs because they are easily implemented
> and expandable without being rigid in any way.
> If we use key/value pairs, we could pass in child device info
> in one of the keys. It could be either a device tree overlay or an
> ACPI overlay. Or could just be left out. So platforms that
> aren't already using DT wouldn't have to. Platforms that
> are have a smooth road to enumeration.
I'm not sure if you can bundle up enumeration info *with* the image
since you might e.g.
load the same image (i.e. same header) into different FPGAs and the
required update to
the kernel state, i.e. live tree or ACPI would depend entirely on
which FPGA you loaded
the image into w.r.t busses it's connected to etc.
I do think this info cannot be image specific, but needs to be passed
in via something
external such as a dt overlay.
next prev parent reply other threads:[~2017-02-20 23:49 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-15 16:14 FPGA Region enhancements and fixes Alan Tull
2017-02-15 16:14 ` [RFC 1/8] fpga-mgr: add a single function for fpga loading methods Alan Tull
2017-02-16 0:36 ` matthew.gerlach
2017-02-15 16:14 ` [RFC 2/8] fpga-region: support more than one overlay per FPGA region Alan Tull
2017-02-16 16:50 ` matthew.gerlach
2017-02-16 17:35 ` Alan Tull
2017-02-15 16:14 ` [RFC 3/8] fpga-bridge: add non-dt support Alan Tull
2017-02-15 16:14 ` [RFC 4/8] doc: fpga-mgr: separate getting/locking FPGA manager Alan Tull
2017-02-17 17:14 ` Li, Yi
2017-02-17 21:55 ` Alan Tull
2017-02-17 17:52 ` Moritz Fischer
2017-02-17 22:02 ` Alan Tull
2017-02-15 16:14 ` [RFC 5/8] " Alan Tull
2017-02-15 16:14 ` [RFC 6/8] fpga-region: separate out common code to allow non-dt support Alan Tull
2017-02-15 16:14 ` [RFC 7/8] fpga-region: add sysfs interface Alan Tull
2017-02-15 17:21 ` Jason Gunthorpe
2017-02-15 17:46 ` Alan Tull
2017-02-15 17:55 ` Moritz Fischer
2017-02-15 18:06 ` Jason Gunthorpe
2017-02-15 18:23 ` Alan Tull
2017-02-15 18:31 ` Moritz Fischer
2017-02-15 19:49 ` Jason Gunthorpe
2017-02-15 22:49 ` Alan Tull
2017-02-15 23:07 ` Jason Gunthorpe
2017-02-15 20:07 ` matthew.gerlach
2017-02-15 20:37 ` Jason Gunthorpe
2017-02-15 20:54 ` Moritz Fischer
2017-02-15 21:15 ` Jason Gunthorpe
2017-02-15 21:36 ` Moritz Fischer
2017-02-15 22:42 ` Alan Tull
2017-02-16 0:16 ` Moritz Fischer
2017-02-16 17:47 ` Alan Tull
2017-02-16 17:56 ` Jason Gunthorpe
2017-02-16 18:11 ` Moritz Fischer
2017-02-17 22:28 ` Yves Vandervennet
2017-02-18 2:30 ` Moritz Fischer
2017-02-18 12:45 ` Nadathur, Sundar
2017-02-18 20:10 ` Alan Tull
2017-02-18 20:45 ` Moritz Fischer
2017-02-19 15:00 ` Alan Tull
2017-02-19 23:16 ` Alan Tull
2017-02-20 23:49 ` Moritz Fischer [this message]
2017-02-21 18:33 ` Alan Tull
2017-02-22 3:13 ` Nadathur, Sundar
2017-02-22 3:49 ` Moritz Fischer
2017-02-22 5:12 ` Jason Gunthorpe
2017-02-22 5:38 ` Moritz Fischer
2017-02-22 5:46 ` Nadathur, Sundar
2017-02-22 6:05 ` Moritz Fischer
2017-02-22 16:44 ` Jason Gunthorpe
2017-02-22 17:50 ` Moritz Fischer
2017-02-22 17:54 ` Jason Gunthorpe
2017-02-22 17:57 ` Moritz Fischer
2017-02-22 16:33 ` Alan Tull
2017-02-22 16:44 ` Moritz Fischer
2017-02-22 16:52 ` Alan Tull
2017-02-27 20:09 ` Alan Tull
2017-02-27 22:49 ` Moritz Fischer
2017-02-28 0:04 ` matthew.gerlach
2017-02-15 21:20 ` Anatolij Gustschin
2017-02-15 16:14 ` [RFC 8/8] doc: fpga: add sysfs document for fpga region Alan Tull
2017-02-28 17:35 ` FPGA Region enhancements and fixes Alan Tull
2017-02-28 22:03 ` Alan Tull
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.