All of lore.kernel.org
 help / color / mirror / Atom feed
* [U-Boot] [PATCH v2 0/3] Add Beelink GS1 Board
@ 2019-04-12 14:15 Clément Péron
  2019-04-12 14:15 ` [U-Boot] [PATCH v2 1/3] arm: dts: h6: sync with dts with Linux sunxi Clément Péron
                   ` (2 more replies)
  0 siblings, 3 replies; 7+ messages in thread
From: Clément Péron @ 2019-04-12 14:15 UTC (permalink / raw)
  To: u-boot

This serie introduce the Beelink GS1 board with a patch for
the reset on Allwinner H6.

Thanks to Jagan Teki most of the Beelink GS1 device-tree is
taken from the Orange Pi boards.

Changes with v1:
 - Add bus-width for mmc2 node
 - Add sha1 in the sync dts commit

Clément Péron (3):
  arm: dts: h6: sync with dts with Linux sunxi
  arm: dts: h6: Add Beelink GS1 initial support
  arm: sunxi: h6: fix reset using r_wdog

 arch/arm/dts/Makefile                         |   1 +
 arch/arm/dts/sun50i-h6-beelink-gs1.dts        | 184 ++++++++++++++++++
 arch/arm/dts/sun50i-h6-orangepi.dtsi          |   2 -
 arch/arm/dts/sun50i-h6-pine-h64.dts           |   4 -
 arch/arm/dts/sun50i-h6.dtsi                   |  16 +-
 .../include/asm/arch-sunxi/cpu_sun50i_h6.h    |   1 +
 arch/arm/mach-sunxi/board.c                   |   9 +-
 configs/beelink_gs1_defconfig                 |  15 ++
 8 files changed, 218 insertions(+), 14 deletions(-)
 create mode 100644 arch/arm/dts/sun50i-h6-beelink-gs1.dts
 create mode 100644 configs/beelink_gs1_defconfig

-- 
2.17.1

^ permalink raw reply	[flat|nested] 7+ messages in thread
* [U-Boot] [PATCH v2 1/3] arm: dts: h6: sync with dts with Linux sunxi
  2019-04-12 14:15 [U-Boot] [PATCH v2 0/3] Add Beelink GS1 Board Clément Péron
@ 2019-04-12 14:15 ` Clément Péron
  2019-04-12 14:15 ` [U-Boot] [PATCH v2 2/3] arm: dts: h6: Add Beelink GS1 initial support Clément Péron
  2019-04-12 14:15 ` [U-Boot] [PATCH v2 3/3] arm: sunxi: h6: fix reset using r_wdog Clément Péron
  2 siblings, 0 replies; 7+ messages in thread
From: Clément Péron @ 2019-04-12 14:15 UTC (permalink / raw)
  To: u-boot

There are some differences between U-Boot and Linux device tree files.

Sync only the minor changes.

6ba2e45d57af - arm64: dts: allwinner: h6: move MMC pinctrl to dtsi <Clément Péron>
54eac67bbe3a - arm64: dts: allwinner: Fix pinctrl node names <Maxime Ripard>
31af04cd60d3 - arm64: dts: Remove inconsistent use of 'arm,armv8' compatible string <Rob Herring>

Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 arch/arm/dts/sun50i-h6-orangepi.dtsi |  2 --
 arch/arm/dts/sun50i-h6-pine-h64.dts  |  4 ----
 arch/arm/dts/sun50i-h6.dtsi          | 16 ++++++++++------
 3 files changed, 10 insertions(+), 12 deletions(-)

diff --git a/arch/arm/dts/sun50i-h6-orangepi.dtsi b/arch/arm/dts/sun50i-h6-orangepi.dtsi
index 0612c19cd9..3748dcaa70 100644
--- a/arch/arm/dts/sun50i-h6-orangepi.dtsi
+++ b/arch/arm/dts/sun50i-h6-orangepi.dtsi
@@ -24,8 +24,6 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
diff --git a/arch/arm/dts/sun50i-h6-pine-h64.dts b/arch/arm/dts/sun50i-h6-pine-h64.dts
index ceffc40810..a26314c084 100644
--- a/arch/arm/dts/sun50i-h6-pine-h64.dts
+++ b/arch/arm/dts/sun50i-h6-pine-h64.dts
@@ -42,16 +42,12 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
 &mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
 	vmmc-supply = <&reg_cldo1>;
 	vqmmc-supply = <&reg_bldo2>;
 	non-removable;
diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi
index cfa5fffcf6..5f01314703 100644
--- a/arch/arm/dts/sun50i-h6.dtsi
+++ b/arch/arm/dts/sun50i-h6.dtsi
@@ -19,28 +19,28 @@
 		#size-cells = <0>;
 
 		cpu0: cpu at 0 {
-			compatible = "arm,cortex-a53", "arm,armv8";
+			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <0>;
 			enable-method = "psci";
 		};
 
 		cpu1: cpu at 1 {
-			compatible = "arm,cortex-a53", "arm,armv8";
+			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <1>;
 			enable-method = "psci";
 		};
 
 		cpu2: cpu at 2 {
-			compatible = "arm,cortex-a53", "arm,armv8";
+			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <2>;
 			enable-method = "psci";
 		};
 
 		cpu3: cpu at 3 {
-			compatible = "arm,cortex-a53", "arm,armv8";
+			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <3>;
 			enable-method = "psci";
@@ -143,7 +143,7 @@
 				bias-pull-up;
 			};
 
-			uart0_ph_pins: uart0-ph {
+			uart0_ph_pins: uart0-ph-pins {
 				pins = "PH0", "PH1";
 				function = "uart0";
 			};
@@ -158,6 +158,8 @@
 			resets = <&ccu RST_BUS_MMC0>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -186,6 +188,8 @@
 			resets = <&ccu RST_BUS_MMC2>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -266,7 +270,7 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
-			r_i2c_pins: r-i2c {
+			r_i2c_pins: r-i2c-pins {
 				pins = "PL0", "PL1";
 				function = "s_i2c";
 			};
-- 
2.17.1

^ permalink raw reply related	[flat|nested] 7+ messages in thread
* [U-Boot] [PATCH v2 2/3] arm: dts: h6: Add Beelink GS1 initial support
  2019-04-12 14:15 [U-Boot] [PATCH v2 0/3] Add Beelink GS1 Board Clément Péron
  2019-04-12 14:15 ` [U-Boot] [PATCH v2 1/3] arm: dts: h6: sync with dts with Linux sunxi Clément Péron
@ 2019-04-12 14:15 ` Clément Péron
  2019-04-14 17:29   ` Jagan Teki
  2019-04-12 14:15 ` [U-Boot] [PATCH v2 3/3] arm: sunxi: h6: fix reset using r_wdog Clément Péron
  2 siblings, 1 reply; 7+ messages in thread
From: Clément Péron @ 2019-04-12 14:15 UTC (permalink / raw)
  To: u-boot

Beelink GS1 is an Allwinner H6 based TV box,
which support:
- Allwinner H6 Quad-core 64-bit ARM Cortex-A53
- GPU Mali-T720
- 2GB LPDDR3 RAM
- 16GB eMMC
- AXP805 PMIC
- 1Gbps GMAC via RTL8211E
- USB 2.0 and 3.0 Host
- HDMI port
- S/PDIF port
- 5V/2A DC power supply
- Wi-Fi/BT via Fn-Link 6222B-SRB (RTL8222BS)

Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 arch/arm/dts/Makefile                  |   1 +
 arch/arm/dts/sun50i-h6-beelink-gs1.dts | 184 +++++++++++++++++++++++++
 configs/beelink_gs1_defconfig          |  15 ++
 3 files changed, 200 insertions(+)
 create mode 100644 arch/arm/dts/sun50i-h6-beelink-gs1.dts
 create mode 100644 configs/beelink_gs1_defconfig

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 86a01c2c70..61e7156284 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -467,6 +467,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \
 	sun50i-h5-orangepi-prime.dtb \
 	sun50i-h5-orangepi-zero-plus2.dtb
 dtb-$(CONFIG_MACH_SUN50I_H6) += \
+	sun50i-h6-beelink-gs1.dtb \
 	sun50i-h6-orangepi-lite2.dtb \
 	sun50i-h6-orangepi-one-plus.dtb \
 	sun50i-h6-pine-h64.dtb
diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
new file mode 100644
index 0000000000..54b0882bed
--- /dev/null
+++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2019 Clément Péron <peron.clem@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Beelink GS1";
+	compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "beelink:white:power";
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+			default-state = "on";
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC jack */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_cldo1>;
+	vqmmc-supply = <&reg_bldo2>;
+	non-removable;
+	cap-mmc-hw-reset;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp805: pmic at 36 {
+		compatible = "x-powers,axp805", "x-powers,axp806";
+		reg = <0x36>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-ac200";
+				regulator-enable-ramp-delay = <100000>;
+			};
+
+			reg_aldo3: aldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc25-dram";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-bias-pll";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse-pcie-hdmi-io";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-dcxoio";
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-1";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <960000>;
+				regulator-max-microvolt = <960000>;
+				regulator-name = "vdd-sys";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dram";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
diff --git a/configs/beelink_gs1_defconfig b/configs/beelink_gs1_defconfig
new file mode 100644
index 0000000000..ef4dd29549
--- /dev/null
+++ b/configs/beelink_gs1_defconfig
@@ -0,0 +1,15 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN50I_H6=y
+CONFIG_MMC0_CD_PIN="PF6"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+# CONFIG_PSCI_RESET is not set
+CONFIG_NR_DRAM_BANKS=1
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-beelink-gs1"
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
-- 
2.17.1

^ permalink raw reply related	[flat|nested] 7+ messages in thread
* [U-Boot] [PATCH v2 3/3] arm: sunxi: h6: fix reset using r_wdog
  2019-04-12 14:15 [U-Boot] [PATCH v2 0/3] Add Beelink GS1 Board Clément Péron
  2019-04-12 14:15 ` [U-Boot] [PATCH v2 1/3] arm: dts: h6: sync with dts with Linux sunxi Clément Péron
  2019-04-12 14:15 ` [U-Boot] [PATCH v2 2/3] arm: dts: h6: Add Beelink GS1 initial support Clément Péron
@ 2019-04-12 14:15 ` Clément Péron
  2 siblings, 0 replies; 7+ messages in thread
From: Clément Péron @ 2019-04-12 14:15 UTC (permalink / raw)
  To: u-boot

WDOG is broken for some H6 rev. The board is not
reseted correctly.

Use the R_WDOG instead.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h | 1 +
 arch/arm/mach-sunxi/board.c                     | 9 +++++++--
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h b/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h
index 41a9b0fc47..6392cb07b4 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h
@@ -60,6 +60,7 @@
 #define SUNXI_RTC_BASE			0x07000000
 #define SUNXI_R_CPUCFG_BASE		0x07000400
 #define SUNXI_PRCM_BASE			0x07010000
+#define SUNXI_R_WDOG_BASE		0x07020400
 #define SUNXI_R_PIO_BASE		0x07022000
 #define SUNXI_R_UART_BASE		0x07080000
 #define SUNXI_R_TWI_BASE		0x07081400
diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index b74eaf2a0e..1075b5ca54 100644
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -287,9 +287,14 @@ void reset_cpu(ulong addr)
 		writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
 	}
 #elif defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_MACH_SUN50I_H6)
+#if defined(CONFIG_MACH_SUN50I_H6)
+	/* WDOG is broken for some H6 rev. use the R_WDOG instead */
 	static const struct sunxi_wdog *wdog =
-		 ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
-
+		(struct sunxi_wdog *)SUNXI_R_WDOG_BASE;
+#else
+	static const struct sunxi_wdog *wdog =
+		((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
+#endif
 	/* Set the watchdog for its shortest interval (.5s) and wait */
 	writel(WDT_CFG_RESET, &wdog->cfg);
 	writel(WDT_MODE_EN, &wdog->mode);
-- 
2.17.1

^ permalink raw reply related	[flat|nested] 7+ messages in thread
* [U-Boot] [PATCH v2 2/3] arm: dts: h6: Add Beelink GS1 initial support
  2019-04-12 14:15 ` [U-Boot] [PATCH v2 2/3] arm: dts: h6: Add Beelink GS1 initial support Clément Péron
@ 2019-04-14 17:29   ` Jagan Teki
  2019-04-14 21:27     ` Clément Péron
  0 siblings, 1 reply; 7+ messages in thread
From: Jagan Teki @ 2019-04-14 17:29 UTC (permalink / raw)
  To: u-boot

On Fri, Apr 12, 2019 at 7:45 PM Clément Péron <peron.clem@gmail.com> wrote:
>
> Beelink GS1 is an Allwinner H6 based TV box,
> which support:
> - Allwinner H6 Quad-core 64-bit ARM Cortex-A53
> - GPU Mali-T720
> - 2GB LPDDR3 RAM
> - 16GB eMMC
> - AXP805 PMIC
> - 1Gbps GMAC via RTL8211E
> - USB 2.0 and 3.0 Host
> - HDMI port
> - S/PDIF port
> - 5V/2A DC power supply
> - Wi-Fi/BT via Fn-Link 6222B-SRB (RTL8222BS)

Please dts sync commit details here.

>
> Signed-off-by: Clément Péron <peron.clem@gmail.com>
> ---
>  arch/arm/dts/Makefile                  |   1 +
>  arch/arm/dts/sun50i-h6-beelink-gs1.dts | 184 +++++++++++++++++++++++++

Seems like this has part of required nodes, sync the complete dts.

>  configs/beelink_gs1_defconfig          |  15 ++

Add entry on board/sunxi/MAINTAINERS

>  3 files changed, 200 insertions(+)
>  create mode 100644 arch/arm/dts/sun50i-h6-beelink-gs1.dts
>  create mode 100644 configs/beelink_gs1_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 86a01c2c70..61e7156284 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -467,6 +467,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \
>         sun50i-h5-orangepi-prime.dtb \
>         sun50i-h5-orangepi-zero-plus2.dtb
>  dtb-$(CONFIG_MACH_SUN50I_H6) += \
> +       sun50i-h6-beelink-gs1.dtb \
>         sun50i-h6-orangepi-lite2.dtb \
>         sun50i-h6-orangepi-one-plus.dtb \
>         sun50i-h6-pine-h64.dtb
> diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
> new file mode 100644
> index 0000000000..54b0882bed
> --- /dev/null
> +++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
> @@ -0,0 +1,184 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +/*
> + * Copyright (C) 2019 Clément Péron <peron.clem@gmail.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-h6.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +       model = "Beelink GS1";
> +       compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
> +
> +       aliases {
> +               serial0 = &uart0;
> +       };
> +
> +       chosen {
> +               stdout-path = "serial0:115200n8";
> +       };
> +
> +       leds {
> +               compatible = "gpio-leds";
> +
> +               power {
> +                       label = "beelink:white:power";
> +                       gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
> +                       default-state = "on";
> +               };
> +       };
> +
> +       reg_vcc5v: vcc5v {
> +               /* board wide 5V supply directly from the DC jack */
> +               compatible = "regulator-fixed";
> +               regulator-name = "vcc-5v";
> +               regulator-min-microvolt = <5000000>;
> +               regulator-max-microvolt = <5000000>;
> +               regulator-always-on;
> +       };
> +};
> +
> +&mmc0 {
> +       vmmc-supply = <&reg_cldo1>;
> +       cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
> +       bus-width = <4>;
> +       status = "okay";
> +};
> +
> +&mmc2 {
> +       vmmc-supply = <&reg_cldo1>;
> +       vqmmc-supply = <&reg_bldo2>;
> +       non-removable;
> +       cap-mmc-hw-reset;
> +       bus-width = <8>;
> +       status = "okay";
> +};
> +
> +&r_i2c {
> +       status = "okay";
> +
> +       axp805: pmic at 36 {
> +               compatible = "x-powers,axp805", "x-powers,axp806";
> +               reg = <0x36>;
> +               interrupt-parent = <&r_intc>;
> +               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> +               interrupt-controller;
> +               #interrupt-cells = <1>;
> +               x-powers,self-working-mode;
> +               vina-supply = <&reg_vcc5v>;
> +               vinb-supply = <&reg_vcc5v>;
> +               vinc-supply = <&reg_vcc5v>;
> +               vind-supply = <&reg_vcc5v>;
> +               vine-supply = <&reg_vcc5v>;
> +               aldoin-supply = <&reg_vcc5v>;
> +               bldoin-supply = <&reg_vcc5v>;
> +               cldoin-supply = <&reg_vcc5v>;
> +
> +               regulators {
> +                       reg_aldo1: aldo1 {
> +                               regulator-always-on;
> +                               regulator-min-microvolt = <3300000>;
> +                               regulator-max-microvolt = <3300000>;
> +                               regulator-name = "vcc-pl";
> +                       };
> +
> +                       reg_aldo2: aldo2 {
> +                               regulator-min-microvolt = <3300000>;
> +                               regulator-max-microvolt = <3300000>;
> +                               regulator-name = "vcc-ac200";
> +                               regulator-enable-ramp-delay = <100000>;
> +                       };
> +
> +                       reg_aldo3: aldo3 {
> +                               regulator-always-on;
> +                               regulator-min-microvolt = <3300000>;
> +                               regulator-max-microvolt = <3300000>;
> +                               regulator-name = "vcc25-dram";
> +                       };
> +
> +                       reg_bldo1: bldo1 {
> +                               regulator-always-on;
> +                               regulator-min-microvolt = <1800000>;
> +                               regulator-max-microvolt = <1800000>;
> +                               regulator-name = "vcc-bias-pll";
> +                       };
> +
> +                       reg_bldo2: bldo2 {
> +                               regulator-always-on;
> +                               regulator-min-microvolt = <1800000>;
> +                               regulator-max-microvolt = <1800000>;
> +                               regulator-name = "vcc-efuse-pcie-hdmi-io";
> +                       };
> +
> +                       reg_bldo3: bldo3 {
> +                               regulator-always-on;
> +                               regulator-min-microvolt = <1800000>;
> +                               regulator-max-microvolt = <1800000>;
> +                               regulator-name = "vcc-dcxoio";
> +                       };
> +
> +                       bldo4 {
> +                               /* unused */
> +                       };
> +
> +                       reg_cldo1: cldo1 {
> +                               regulator-always-on;
> +                               regulator-min-microvolt = <3300000>;
> +                               regulator-max-microvolt = <3300000>;
> +                               regulator-name = "vcc-3v3";
> +                       };
> +
> +                       reg_cldo2: cldo2 {
> +                               regulator-min-microvolt = <3300000>;
> +                               regulator-max-microvolt = <3300000>;
> +                               regulator-name = "vcc-wifi-1";
> +                       };
> +
> +                       reg_cldo3: cldo3 {
> +                               regulator-min-microvolt = <3300000>;
> +                               regulator-max-microvolt = <3300000>;
> +                               regulator-name = "vcc-wifi-2";
> +                       };
> +
> +                       reg_dcdca: dcdca {
> +                               regulator-always-on;
> +                               regulator-min-microvolt = <810000>;
> +                               regulator-max-microvolt = <1080000>;
> +                               regulator-name = "vdd-cpu";
> +                       };
> +
> +                       reg_dcdcc: dcdcc {
> +                               regulator-min-microvolt = <810000>;
> +                               regulator-max-microvolt = <1080000>;
> +                               regulator-name = "vdd-gpu";
> +                       };
> +
> +                       reg_dcdcd: dcdcd {
> +                               regulator-always-on;
> +                               regulator-min-microvolt = <960000>;
> +                               regulator-max-microvolt = <960000>;
> +                               regulator-name = "vdd-sys";
> +                       };
> +
> +                       reg_dcdce: dcdce {
> +                               regulator-always-on;
> +                               regulator-min-microvolt = <1200000>;
> +                               regulator-max-microvolt = <1200000>;
> +                               regulator-name = "vcc-dram";
> +                       };
> +
> +                       sw {
> +                               /* unused */
> +                       };
> +               };
> +       };
> +};
> +
> +&uart0 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&uart0_ph_pins>;
> +       status = "okay";
> +};
> diff --git a/configs/beelink_gs1_defconfig b/configs/beelink_gs1_defconfig
> new file mode 100644
> index 0000000000..ef4dd29549
> --- /dev/null
> +++ b/configs/beelink_gs1_defconfig
> @@ -0,0 +1,15 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_SPL=y
> +CONFIG_MACH_SUN50I_H6=y
> +CONFIG_MMC0_CD_PIN="PF6"
> +CONFIG_MMC_SUNXI_SLOT_EXTRA=2
> +# CONFIG_PSCI_RESET is not set
> +CONFIG_NR_DRAM_BANKS=1
> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_SPL_DOS_PARTITION is not set
> +# CONFIG_SPL_EFI_PARTITION is not set
> +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-beelink-gs1"
> +CONFIG_LED=y
> +CONFIG_LED_GPIO=y

Seems like most of Allwinner gpio's are gpio-leds. so select LED
(since it's dm led core) in arch/arm/Kconfig if LED_GPIO. I'm thinking
this could be proper assignment.

^ permalink raw reply	[flat|nested] 7+ messages in thread
* [U-Boot] [PATCH v2 2/3] arm: dts: h6: Add Beelink GS1 initial support
  2019-04-14 17:29   ` Jagan Teki
@ 2019-04-14 21:27     ` Clément Péron
  2019-04-15  5:33       ` Jagan Teki
  0 siblings, 1 reply; 7+ messages in thread
From: Clément Péron @ 2019-04-14 21:27 UTC (permalink / raw)
  To: u-boot

Hi,

On Sun, 14 Apr 2019 at 19:29, Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> On Fri, Apr 12, 2019 at 7:45 PM Clément Péron <peron.clem@gmail.com> wrote:
> >
> > Beelink GS1 is an Allwinner H6 based TV box,
> > which support:
> > - Allwinner H6 Quad-core 64-bit ARM Cortex-A53
> > - GPU Mali-T720
> > - 2GB LPDDR3 RAM
> > - 16GB eMMC
> > - AXP805 PMIC
> > - 1Gbps GMAC via RTL8211E
> > - USB 2.0 and 3.0 Host
> > - HDMI port
> > - S/PDIF port
> > - 5V/2A DC power supply
> > - Wi-Fi/BT via Fn-Link 6222B-SRB (RTL8222BS)
>
> Please dts sync commit details here.
>
> >
> > Signed-off-by: Clément Péron <peron.clem@gmail.com>
> > ---
> >  arch/arm/dts/Makefile                  |   1 +
> >  arch/arm/dts/sun50i-h6-beelink-gs1.dts | 184 +++++++++++++++++++++++++
>
> Seems like this has part of required nodes, sync the complete dts.

Ok so you want to add the complete dts from linux.

I think only IP used in U-boot are needed.

I will do that in v3

>
> >  configs/beelink_gs1_defconfig          |  15 ++
>
> Add entry on board/sunxi/MAINTAINERS

Ok

>
> >  3 files changed, 200 insertions(+)
> >  create mode 100644 arch/arm/dts/sun50i-h6-beelink-gs1.dts
> >  create mode 100644 configs/beelink_gs1_defconfig
> >
> > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> > index 86a01c2c70..61e7156284 100644
> > --- a/arch/arm/dts/Makefile
> > +++ b/arch/arm/dts/Makefile
> > @@ -467,6 +467,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \
> >         sun50i-h5-orangepi-prime.dtb \
> >         sun50i-h5-orangepi-zero-plus2.dtb
> >  dtb-$(CONFIG_MACH_SUN50I_H6) += \
> > +       sun50i-h6-beelink-gs1.dtb \
> >         sun50i-h6-orangepi-lite2.dtb \
> >         sun50i-h6-orangepi-one-plus.dtb \
> >         sun50i-h6-pine-h64.dtb
> > diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
> > new file mode 100644
> > index 0000000000..54b0882bed
> > --- /dev/null
> > +++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
> > @@ -0,0 +1,184 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> > +/*
> > + * Copyright (C) 2019 Clément Péron <peron.clem@gmail.com>
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "sun50i-h6.dtsi"
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +
> > +/ {
> > +       model = "Beelink GS1";
> > +       compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
> > +
> > +       aliases {
> > +               serial0 = &uart0;
> > +       };
> > +
> > +       chosen {
> > +               stdout-path = "serial0:115200n8";
> > +       };
> > +
> > +       leds {
> > +               compatible = "gpio-leds";
> > +
> > +               power {
> > +                       label = "beelink:white:power";
> > +                       gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
> > +                       default-state = "on";
> > +               };
> > +       };
> > +
> > +       reg_vcc5v: vcc5v {
> > +               /* board wide 5V supply directly from the DC jack */
> > +               compatible = "regulator-fixed";
> > +               regulator-name = "vcc-5v";
> > +               regulator-min-microvolt = <5000000>;
> > +               regulator-max-microvolt = <5000000>;
> > +               regulator-always-on;
> > +       };
> > +};
> > +
> > +&mmc0 {
> > +       vmmc-supply = <&reg_cldo1>;
> > +       cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
> > +       bus-width = <4>;
> > +       status = "okay";
> > +};
> > +
> > +&mmc2 {
> > +       vmmc-supply = <&reg_cldo1>;
> > +       vqmmc-supply = <&reg_bldo2>;
> > +       non-removable;
> > +       cap-mmc-hw-reset;
> > +       bus-width = <8>;
> > +       status = "okay";
> > +};
> > +
> > +&r_i2c {
> > +       status = "okay";
> > +
> > +       axp805: pmic at 36 {
> > +               compatible = "x-powers,axp805", "x-powers,axp806";
> > +               reg = <0x36>;
> > +               interrupt-parent = <&r_intc>;
> > +               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> > +               interrupt-controller;
> > +               #interrupt-cells = <1>;
> > +               x-powers,self-working-mode;
> > +               vina-supply = <&reg_vcc5v>;
> > +               vinb-supply = <&reg_vcc5v>;
> > +               vinc-supply = <&reg_vcc5v>;
> > +               vind-supply = <&reg_vcc5v>;
> > +               vine-supply = <&reg_vcc5v>;
> > +               aldoin-supply = <&reg_vcc5v>;
> > +               bldoin-supply = <&reg_vcc5v>;
> > +               cldoin-supply = <&reg_vcc5v>;
> > +
> > +               regulators {
> > +                       reg_aldo1: aldo1 {
> > +                               regulator-always-on;
> > +                               regulator-min-microvolt = <3300000>;
> > +                               regulator-max-microvolt = <3300000>;
> > +                               regulator-name = "vcc-pl";
> > +                       };
> > +
> > +                       reg_aldo2: aldo2 {
> > +                               regulator-min-microvolt = <3300000>;
> > +                               regulator-max-microvolt = <3300000>;
> > +                               regulator-name = "vcc-ac200";
> > +                               regulator-enable-ramp-delay = <100000>;
> > +                       };
> > +
> > +                       reg_aldo3: aldo3 {
> > +                               regulator-always-on;
> > +                               regulator-min-microvolt = <3300000>;
> > +                               regulator-max-microvolt = <3300000>;
> > +                               regulator-name = "vcc25-dram";
> > +                       };
> > +
> > +                       reg_bldo1: bldo1 {
> > +                               regulator-always-on;
> > +                               regulator-min-microvolt = <1800000>;
> > +                               regulator-max-microvolt = <1800000>;
> > +                               regulator-name = "vcc-bias-pll";
> > +                       };
> > +
> > +                       reg_bldo2: bldo2 {
> > +                               regulator-always-on;
> > +                               regulator-min-microvolt = <1800000>;
> > +                               regulator-max-microvolt = <1800000>;
> > +                               regulator-name = "vcc-efuse-pcie-hdmi-io";
> > +                       };
> > +
> > +                       reg_bldo3: bldo3 {
> > +                               regulator-always-on;
> > +                               regulator-min-microvolt = <1800000>;
> > +                               regulator-max-microvolt = <1800000>;
> > +                               regulator-name = "vcc-dcxoio";
> > +                       };
> > +
> > +                       bldo4 {
> > +                               /* unused */
> > +                       };
> > +
> > +                       reg_cldo1: cldo1 {
> > +                               regulator-always-on;
> > +                               regulator-min-microvolt = <3300000>;
> > +                               regulator-max-microvolt = <3300000>;
> > +                               regulator-name = "vcc-3v3";
> > +                       };
> > +
> > +                       reg_cldo2: cldo2 {
> > +                               regulator-min-microvolt = <3300000>;
> > +                               regulator-max-microvolt = <3300000>;
> > +                               regulator-name = "vcc-wifi-1";
> > +                       };
> > +
> > +                       reg_cldo3: cldo3 {
> > +                               regulator-min-microvolt = <3300000>;
> > +                               regulator-max-microvolt = <3300000>;
> > +                               regulator-name = "vcc-wifi-2";
> > +                       };
> > +
> > +                       reg_dcdca: dcdca {
> > +                               regulator-always-on;
> > +                               regulator-min-microvolt = <810000>;
> > +                               regulator-max-microvolt = <1080000>;
> > +                               regulator-name = "vdd-cpu";
> > +                       };
> > +
> > +                       reg_dcdcc: dcdcc {
> > +                               regulator-min-microvolt = <810000>;
> > +                               regulator-max-microvolt = <1080000>;
> > +                               regulator-name = "vdd-gpu";
> > +                       };
> > +
> > +                       reg_dcdcd: dcdcd {
> > +                               regulator-always-on;
> > +                               regulator-min-microvolt = <960000>;
> > +                               regulator-max-microvolt = <960000>;
> > +                               regulator-name = "vdd-sys";
> > +                       };
> > +
> > +                       reg_dcdce: dcdce {
> > +                               regulator-always-on;
> > +                               regulator-min-microvolt = <1200000>;
> > +                               regulator-max-microvolt = <1200000>;
> > +                               regulator-name = "vcc-dram";
> > +                       };
> > +
> > +                       sw {
> > +                               /* unused */
> > +                       };
> > +               };
> > +       };
> > +};
> > +
> > +&uart0 {
> > +       pinctrl-names = "default";
> > +       pinctrl-0 = <&uart0_ph_pins>;
> > +       status = "okay";
> > +};
> > diff --git a/configs/beelink_gs1_defconfig b/configs/beelink_gs1_defconfig
> > new file mode 100644
> > index 0000000000..ef4dd29549
> > --- /dev/null
> > +++ b/configs/beelink_gs1_defconfig
> > @@ -0,0 +1,15 @@
> > +CONFIG_ARM=y
> > +CONFIG_ARCH_SUNXI=y
> > +CONFIG_SPL=y
> > +CONFIG_MACH_SUN50I_H6=y
> > +CONFIG_MMC0_CD_PIN="PF6"
> > +CONFIG_MMC_SUNXI_SLOT_EXTRA=2
> > +# CONFIG_PSCI_RESET is not set
> > +CONFIG_NR_DRAM_BANKS=1
> > +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> > +# CONFIG_CMD_FLASH is not set
> > +# CONFIG_SPL_DOS_PARTITION is not set
> > +# CONFIG_SPL_EFI_PARTITION is not set
> > +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-beelink-gs1"
> > +CONFIG_LED=y
> > +CONFIG_LED_GPIO=y
>
> Seems like most of Allwinner gpio's are gpio-leds. so select LED
> (since it's dm led core) in arch/arm/Kconfig if LED_GPIO. I'm thinking
> this could be proper assignment.

We can't do that as LED_GPIO depends on LED.

^ permalink raw reply	[flat|nested] 7+ messages in thread
* [U-Boot] [PATCH v2 2/3] arm: dts: h6: Add Beelink GS1 initial support
  2019-04-14 21:27     ` Clément Péron
@ 2019-04-15  5:33       ` Jagan Teki
  0 siblings, 0 replies; 7+ messages in thread
From: Jagan Teki @ 2019-04-15  5:33 UTC (permalink / raw)
  To: u-boot

On Mon, Apr 15, 2019 at 2:58 AM Clément Péron <peron.clem@gmail.com> wrote:
>
> Hi,
>
> On Sun, 14 Apr 2019 at 19:29, Jagan Teki <jagan@amarulasolutions.com> wrote:
> >
> > On Fri, Apr 12, 2019 at 7:45 PM Clément Péron <peron.clem@gmail.com> wrote:
> > >
> > > Beelink GS1 is an Allwinner H6 based TV box,
> > > which support:
> > > - Allwinner H6 Quad-core 64-bit ARM Cortex-A53
> > > - GPU Mali-T720
> > > - 2GB LPDDR3 RAM
> > > - 16GB eMMC
> > > - AXP805 PMIC
> > > - 1Gbps GMAC via RTL8211E
> > > - USB 2.0 and 3.0 Host
> > > - HDMI port
> > > - S/PDIF port
> > > - 5V/2A DC power supply
> > > - Wi-Fi/BT via Fn-Link 6222B-SRB (RTL8222BS)
> >
> > Please dts sync commit details here.
> >
> > >
> > > Signed-off-by: Clément Péron <peron.clem@gmail.com>
> > > ---
> > >  arch/arm/dts/Makefile                  |   1 +
> > >  arch/arm/dts/sun50i-h6-beelink-gs1.dts | 184 +++++++++++++++++++++++++
> >
> > Seems like this has part of required nodes, sync the complete dts.
>
> Ok so you want to add the complete dts from linux.
>
> I think only IP used in U-boot are needed.
>
> I will do that in v3
>
> >
> > >  configs/beelink_gs1_defconfig          |  15 ++
> >
> > Add entry on board/sunxi/MAINTAINERS
>
> Ok
>
> >
> > >  3 files changed, 200 insertions(+)
> > >  create mode 100644 arch/arm/dts/sun50i-h6-beelink-gs1.dts
> > >  create mode 100644 configs/beelink_gs1_defconfig
> > >
> > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> > > index 86a01c2c70..61e7156284 100644
> > > --- a/arch/arm/dts/Makefile
> > > +++ b/arch/arm/dts/Makefile
> > > @@ -467,6 +467,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \
> > >         sun50i-h5-orangepi-prime.dtb \
> > >         sun50i-h5-orangepi-zero-plus2.dtb
> > >  dtb-$(CONFIG_MACH_SUN50I_H6) += \
> > > +       sun50i-h6-beelink-gs1.dtb \
> > >         sun50i-h6-orangepi-lite2.dtb \
> > >         sun50i-h6-orangepi-one-plus.dtb \
> > >         sun50i-h6-pine-h64.dtb
> > > diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
> > > new file mode 100644
> > > index 0000000000..54b0882bed
> > > --- /dev/null
> > > +++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
> > > @@ -0,0 +1,184 @@
> > > +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> > > +/*
> > > + * Copyright (C) 2019 Clément Péron <peron.clem@gmail.com>
> > > + */
> > > +
> > > +/dts-v1/;
> > > +
> > > +#include "sun50i-h6.dtsi"
> > > +
> > > +#include <dt-bindings/gpio/gpio.h>
> > > +
> > > +/ {
> > > +       model = "Beelink GS1";
> > > +       compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
> > > +
> > > +       aliases {
> > > +               serial0 = &uart0;
> > > +       };
> > > +
> > > +       chosen {
> > > +               stdout-path = "serial0:115200n8";
> > > +       };
> > > +
> > > +       leds {
> > > +               compatible = "gpio-leds";
> > > +
> > > +               power {
> > > +                       label = "beelink:white:power";
> > > +                       gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
> > > +                       default-state = "on";
> > > +               };
> > > +       };
> > > +
> > > +       reg_vcc5v: vcc5v {
> > > +               /* board wide 5V supply directly from the DC jack */
> > > +               compatible = "regulator-fixed";
> > > +               regulator-name = "vcc-5v";
> > > +               regulator-min-microvolt = <5000000>;
> > > +               regulator-max-microvolt = <5000000>;
> > > +               regulator-always-on;
> > > +       };
> > > +};
> > > +
> > > +&mmc0 {
> > > +       vmmc-supply = <&reg_cldo1>;
> > > +       cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
> > > +       bus-width = <4>;
> > > +       status = "okay";
> > > +};
> > > +
> > > +&mmc2 {
> > > +       vmmc-supply = <&reg_cldo1>;
> > > +       vqmmc-supply = <&reg_bldo2>;
> > > +       non-removable;
> > > +       cap-mmc-hw-reset;
> > > +       bus-width = <8>;
> > > +       status = "okay";
> > > +};
> > > +
> > > +&r_i2c {
> > > +       status = "okay";
> > > +
> > > +       axp805: pmic at 36 {
> > > +               compatible = "x-powers,axp805", "x-powers,axp806";
> > > +               reg = <0x36>;
> > > +               interrupt-parent = <&r_intc>;
> > > +               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> > > +               interrupt-controller;
> > > +               #interrupt-cells = <1>;
> > > +               x-powers,self-working-mode;
> > > +               vina-supply = <&reg_vcc5v>;
> > > +               vinb-supply = <&reg_vcc5v>;
> > > +               vinc-supply = <&reg_vcc5v>;
> > > +               vind-supply = <&reg_vcc5v>;
> > > +               vine-supply = <&reg_vcc5v>;
> > > +               aldoin-supply = <&reg_vcc5v>;
> > > +               bldoin-supply = <&reg_vcc5v>;
> > > +               cldoin-supply = <&reg_vcc5v>;
> > > +
> > > +               regulators {
> > > +                       reg_aldo1: aldo1 {
> > > +                               regulator-always-on;
> > > +                               regulator-min-microvolt = <3300000>;
> > > +                               regulator-max-microvolt = <3300000>;
> > > +                               regulator-name = "vcc-pl";
> > > +                       };
> > > +
> > > +                       reg_aldo2: aldo2 {
> > > +                               regulator-min-microvolt = <3300000>;
> > > +                               regulator-max-microvolt = <3300000>;
> > > +                               regulator-name = "vcc-ac200";
> > > +                               regulator-enable-ramp-delay = <100000>;
> > > +                       };
> > > +
> > > +                       reg_aldo3: aldo3 {
> > > +                               regulator-always-on;
> > > +                               regulator-min-microvolt = <3300000>;
> > > +                               regulator-max-microvolt = <3300000>;
> > > +                               regulator-name = "vcc25-dram";
> > > +                       };
> > > +
> > > +                       reg_bldo1: bldo1 {
> > > +                               regulator-always-on;
> > > +                               regulator-min-microvolt = <1800000>;
> > > +                               regulator-max-microvolt = <1800000>;
> > > +                               regulator-name = "vcc-bias-pll";
> > > +                       };
> > > +
> > > +                       reg_bldo2: bldo2 {
> > > +                               regulator-always-on;
> > > +                               regulator-min-microvolt = <1800000>;
> > > +                               regulator-max-microvolt = <1800000>;
> > > +                               regulator-name = "vcc-efuse-pcie-hdmi-io";
> > > +                       };
> > > +
> > > +                       reg_bldo3: bldo3 {
> > > +                               regulator-always-on;
> > > +                               regulator-min-microvolt = <1800000>;
> > > +                               regulator-max-microvolt = <1800000>;
> > > +                               regulator-name = "vcc-dcxoio";
> > > +                       };
> > > +
> > > +                       bldo4 {
> > > +                               /* unused */
> > > +                       };
> > > +
> > > +                       reg_cldo1: cldo1 {
> > > +                               regulator-always-on;
> > > +                               regulator-min-microvolt = <3300000>;
> > > +                               regulator-max-microvolt = <3300000>;
> > > +                               regulator-name = "vcc-3v3";
> > > +                       };
> > > +
> > > +                       reg_cldo2: cldo2 {
> > > +                               regulator-min-microvolt = <3300000>;
> > > +                               regulator-max-microvolt = <3300000>;
> > > +                               regulator-name = "vcc-wifi-1";
> > > +                       };
> > > +
> > > +                       reg_cldo3: cldo3 {
> > > +                               regulator-min-microvolt = <3300000>;
> > > +                               regulator-max-microvolt = <3300000>;
> > > +                               regulator-name = "vcc-wifi-2";
> > > +                       };
> > > +
> > > +                       reg_dcdca: dcdca {
> > > +                               regulator-always-on;
> > > +                               regulator-min-microvolt = <810000>;
> > > +                               regulator-max-microvolt = <1080000>;
> > > +                               regulator-name = "vdd-cpu";
> > > +                       };
> > > +
> > > +                       reg_dcdcc: dcdcc {
> > > +                               regulator-min-microvolt = <810000>;
> > > +                               regulator-max-microvolt = <1080000>;
> > > +                               regulator-name = "vdd-gpu";
> > > +                       };
> > > +
> > > +                       reg_dcdcd: dcdcd {
> > > +                               regulator-always-on;
> > > +                               regulator-min-microvolt = <960000>;
> > > +                               regulator-max-microvolt = <960000>;
> > > +                               regulator-name = "vdd-sys";
> > > +                       };
> > > +
> > > +                       reg_dcdce: dcdce {
> > > +                               regulator-always-on;
> > > +                               regulator-min-microvolt = <1200000>;
> > > +                               regulator-max-microvolt = <1200000>;
> > > +                               regulator-name = "vcc-dram";
> > > +                       };
> > > +
> > > +                       sw {
> > > +                               /* unused */
> > > +                       };
> > > +               };
> > > +       };
> > > +};
> > > +
> > > +&uart0 {
> > > +       pinctrl-names = "default";
> > > +       pinctrl-0 = <&uart0_ph_pins>;
> > > +       status = "okay";
> > > +};
> > > diff --git a/configs/beelink_gs1_defconfig b/configs/beelink_gs1_defconfig
> > > new file mode 100644
> > > index 0000000000..ef4dd29549
> > > --- /dev/null
> > > +++ b/configs/beelink_gs1_defconfig
> > > @@ -0,0 +1,15 @@
> > > +CONFIG_ARM=y
> > > +CONFIG_ARCH_SUNXI=y
> > > +CONFIG_SPL=y
> > > +CONFIG_MACH_SUN50I_H6=y
> > > +CONFIG_MMC0_CD_PIN="PF6"
> > > +CONFIG_MMC_SUNXI_SLOT_EXTRA=2
> > > +# CONFIG_PSCI_RESET is not set
> > > +CONFIG_NR_DRAM_BANKS=1
> > > +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> > > +# CONFIG_CMD_FLASH is not set
> > > +# CONFIG_SPL_DOS_PARTITION is not set
> > > +# CONFIG_SPL_EFI_PARTITION is not set
> > > +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-beelink-gs1"
> > > +CONFIG_LED=y
> > > +CONFIG_LED_GPIO=y
> >
> > Seems like most of Allwinner gpio's are gpio-leds. so select LED
> > (since it's dm led core) in arch/arm/Kconfig if LED_GPIO. I'm thinking
> > this could be proper assignment.
>
> We can't do that as LED_GPIO depends on LED.

True.

^ permalink raw reply	[flat|nested] 7+ messages in thread
end of thread, other threads:[~2019-04-15  5:33 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-12 14:15 [U-Boot] [PATCH v2 0/3] Add Beelink GS1 Board Clément Péron
2019-04-12 14:15 ` [U-Boot] [PATCH v2 1/3] arm: dts: h6: sync with dts with Linux sunxi Clément Péron
2019-04-12 14:15 ` [U-Boot] [PATCH v2 2/3] arm: dts: h6: Add Beelink GS1 initial support Clément Péron
2019-04-14 17:29   ` Jagan Teki
2019-04-14 21:27     ` Clément Péron
2019-04-15  5:33       ` Jagan Teki
2019-04-12 14:15 ` [U-Boot] [PATCH v2 3/3] arm: sunxi: h6: fix reset using r_wdog Clément Péron

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.