* dnf error coming while compiling core-image-sato image. @ 2020-10-18 10:41 NIKHIL PATIL 2020-10-20 1:19 ` [yocto] " Randy MacLeod 0 siblings, 1 reply; 8+ messages in thread From: NIKHIL PATIL @ 2020-10-18 10:41 UTC (permalink / raw) To: yocto+help, yocto [-- Attachment #1: Type: text/plain, Size: 1892 bytes --] Hi team , I am getting continuously dnf error, How we can resolve these . core-image-sato-1.0-r0 do_rootfs: Could not invoke dnf. Command '/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/recipe-sysroot-native/usr/bin/dnf -y -c /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/dnf/dnf.conf --setopt=reposdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/yum.repos.d --repofrompath=oe-repo,/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo --installroot=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs --setopt=logdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/temp -x packagegroup-core-apl-extra --nogpgcheck install autoconf-archive dnf gstreamer1.0-vaapi iqvlinux jhi kernel-modules libtcti-device0 libtcti-device-dev libtcti-device-staticdev libtcti-socket0 libtcti-socket-dev libtcti-socket-staticdev libsapi0 libsapi-dev libsapi-staticdev libva mesa-glxinfo libmraa1 nodejs packagegroup-base-extended packagegroup-core-audio-essential packagegroup-core-boot packagegroup-core-buildessential-extended packagegroup-core-graphics-essential packagegroup-core-ssh-dropbear packagegroup-core-tools-testapps packagegroup-core-x11-base packagegroup-core-x11-sato psplash rpm run-postinsts swig tpm2-abrmd usb-modeswitch usb-modeswitch-data va-intel wayland weston weston-examples xinit-env xserver-xorg locale-base-en-us locale-base-en-gb' returned 1: Added oe-repo repo from /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo [-- Attachment #2: Type: text/html, Size: 2317 bytes --] ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [yocto] dnf error coming while compiling core-image-sato image. 2020-10-18 10:41 dnf error coming while compiling core-image-sato image NIKHIL PATIL @ 2020-10-20 1:19 ` Randy MacLeod 2020-10-20 13:06 ` NIKHIL PATIL 0 siblings, 1 reply; 8+ messages in thread From: Randy MacLeod @ 2020-10-20 1:19 UTC (permalink / raw) To: NIKHIL PATIL, yocto+help, yocto On 2020-10-18 6:41 a.m., NIKHIL PATIL wrote: > Hi team , > I am getting continuously dnf error, How we can resolve these . Hi Nikhil, What exact steps did you take before getting this error and what build host are you using? Are you able to build core-image-minimal using oe-core/master and the default local.conf for qemux86-64? ../Randy > > core-image-sato-1.0-r0 do_rootfs: Could not invoke dnf. Command > '/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/recipe-sysroot-native/usr/bin/dnf > -y -c > /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/dnf/dnf.conf > --setopt=reposdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/yum.repos.d > --repofrompath=oe-repo,/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo > --installroot=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs > --setopt=logdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/temp > -x packagegroup-core-apl-extra --nogpgcheck install autoconf-archive dnf > gstreamer1.0-vaapi iqvlinux jhi kernel-modules libtcti-device0 > libtcti-device-dev libtcti-device-staticdev libtcti-socket0 > libtcti-socket-dev libtcti-socket-staticdev libsapi0 libsapi-dev > libsapi-staticdev libva mesa-glxinfo libmraa1 nodejs > packagegroup-base-extended packagegroup-core-audio-essential > packagegroup-core-boot packagegroup-core-buildessential-extended > packagegroup-core-graphics-essential packagegroup-core-ssh-dropbear > packagegroup-core-tools-testapps packagegroup-core-x11-base > packagegroup-core-x11-sato psplash rpm run-postinsts swig tpm2-abrmd > usb-modeswitch usb-modeswitch-data va-intel wayland weston > weston-examples xinit-env xserver-xorg locale-base-en-us > locale-base-en-gb' returned 1: > Added oe-repo repo from > /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo > > > > > -- # Randy MacLeod # Wind River Linux ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [yocto] dnf error coming while compiling core-image-sato image. 2020-10-20 1:19 ` [yocto] " Randy MacLeod @ 2020-10-20 13:06 ` NIKHIL PATIL 2020-10-20 14:20 ` Randy MacLeod 2020-10-21 5:00 ` Yocto 0 siblings, 2 replies; 8+ messages in thread From: NIKHIL PATIL @ 2020-10-20 13:06 UTC (permalink / raw) To: Randy MacLeod; +Cc: yocto+help, yocto [-- Attachment #1: Type: text/plain, Size: 2607 bytes --] I changed in local.conf (ostree related stuffs ), and put it for compilation , that time i got these error On Tue, Oct 20, 2020 at 6:49 AM Randy MacLeod <randy.macleod@windriver.com> wrote: > On 2020-10-18 6:41 a.m., NIKHIL PATIL wrote: > > Hi team , > > I am getting continuously dnf error, How we can resolve these . > > Hi Nikhil, > > What exact steps did you take before getting this error and > what build host are you using? > > Are you able to build core-image-minimal using oe-core/master > and the default local.conf for qemux86-64? > > ../Randy > > > > > core-image-sato-1.0-r0 do_rootfs: Could not invoke dnf. Command > > > '/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/recipe-sysroot-native/usr/bin/dnf > > > -y -c > > > /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/dnf/dnf.conf > > > > --setopt=reposdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/yum.repos.d > > > > --repofrompath=oe-repo,/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo > > > > --installroot=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs > > > > --setopt=logdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/temp > > > -x packagegroup-core-apl-extra --nogpgcheck install autoconf-archive dnf > > gstreamer1.0-vaapi iqvlinux jhi kernel-modules libtcti-device0 > > libtcti-device-dev libtcti-device-staticdev libtcti-socket0 > > libtcti-socket-dev libtcti-socket-staticdev libsapi0 libsapi-dev > > libsapi-staticdev libva mesa-glxinfo libmraa1 nodejs > > packagegroup-base-extended packagegroup-core-audio-essential > > packagegroup-core-boot packagegroup-core-buildessential-extended > > packagegroup-core-graphics-essential packagegroup-core-ssh-dropbear > > packagegroup-core-tools-testapps packagegroup-core-x11-base > > packagegroup-core-x11-sato psplash rpm run-postinsts swig tpm2-abrmd > > usb-modeswitch usb-modeswitch-data va-intel wayland weston > > weston-examples xinit-env xserver-xorg locale-base-en-us > > locale-base-en-gb' returned 1: > > Added oe-repo repo from > > > /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo > > > > > > > > > > > > > -- > # Randy MacLeod > # Wind River Linux > [-- Attachment #2: Type: text/html, Size: 3085 bytes --] ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [yocto] dnf error coming while compiling core-image-sato image. 2020-10-20 13:06 ` NIKHIL PATIL @ 2020-10-20 14:20 ` Randy MacLeod 2020-10-21 4:53 ` NIKHIL PATIL 2020-10-21 5:00 ` Yocto 1 sibling, 1 reply; 8+ messages in thread From: Randy MacLeod @ 2020-10-20 14:20 UTC (permalink / raw) To: NIKHIL PATIL; +Cc: yocto+help, yocto On 2020-10-20 9:06 a.m., NIKHIL PATIL wrote: > I changed in local.conf (ostree related stuffs ), and put it for > compilation , that time i got these error Hi Nikhil, We encourage people to avoid top-posting so that discussions are easier to read: https://wiki.yoctoproject.org/wiki/Community_Guidelines#Mailing_List_Guidelines Your description doesn't enable anyone else to reproduce what you are doing. What git repos (oe-core/poky/bitbake/...) are you using and what commit is at the HEAD of each? You have no doubt sourced the oe-init-build-env file, otherwise bitbake wouldn't work. Can you do that again and send either your full conf/local.conf file or the lines that you added. You might read: https://wiki.yoctoproject.org/wiki/Bug_reporting_and_Information_levels It's aimed at people opening bugs in the YP Bugzilla but the same rules apply to email asking for help. > > On Tue, Oct 20, 2020 at 6:49 AM Randy MacLeod > <randy.macleod@windriver.com <mailto:randy.macleod@windriver.com>> wrote: > > On 2020-10-18 6:41 a.m., NIKHIL PATIL wrote: > > Hi team , > > I am getting continuously dnf error, How we can > resolve these . > > Hi Nikhil, > > What exact steps did you take before getting this error and > what build host are you using? > > Are you able to build core-image-minimal using oe-core/master > and the default local.conf for qemux86-64? Please confirm that you are able to build core-image-minimal so that people understand your level of experience when trying to help you. ../Randy > > ../Randy > > > > > core-image-sato-1.0-r0 do_rootfs: Could not invoke dnf. Command > > > '/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/recipe-sysroot-native/usr/bin/dnf > > > -y -c > > > /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/dnf/dnf.conf > > > > --setopt=reposdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/yum.repos.d > > > > --repofrompath=oe-repo,/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo > > > > --installroot=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs > > > > --setopt=logdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/temp > > > -x packagegroup-core-apl-extra --nogpgcheck install > autoconf-archive dnf > > gstreamer1.0-vaapi iqvlinux jhi kernel-modules libtcti-device0 > > libtcti-device-dev libtcti-device-staticdev libtcti-socket0 > > libtcti-socket-dev libtcti-socket-staticdev libsapi0 libsapi-dev > > libsapi-staticdev libva mesa-glxinfo libmraa1 nodejs > > packagegroup-base-extended packagegroup-core-audio-essential > > packagegroup-core-boot packagegroup-core-buildessential-extended > > packagegroup-core-graphics-essential packagegroup-core-ssh-dropbear > > packagegroup-core-tools-testapps packagegroup-core-x11-base > > packagegroup-core-x11-sato psplash rpm run-postinsts swig tpm2-abrmd > > usb-modeswitch usb-modeswitch-data va-intel wayland weston > > weston-examples xinit-env xserver-xorg locale-base-en-us > > locale-base-en-gb' returned 1: > > Added oe-repo repo from > > > /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo > > > > > > > > > > > > > -- > # Randy MacLeod > # Wind River Linux > -- # Randy MacLeod # Wind River Linux ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [yocto] dnf error coming while compiling core-image-sato image. 2020-10-20 14:20 ` Randy MacLeod @ 2020-10-21 4:53 ` NIKHIL PATIL 0 siblings, 0 replies; 8+ messages in thread From: NIKHIL PATIL @ 2020-10-21 4:53 UTC (permalink / raw) To: Randy MacLeod; +Cc: yocto+help, yocto [-- Attachment #1.1: Type: text/plain, Size: 4301 bytes --] Hi team, I am not able compile a core-image-minimal also. same issue facing here. PFA (local.conf) . On Tue, Oct 20, 2020 at 7:50 PM Randy MacLeod <randy.macleod@windriver.com> wrote: > On 2020-10-20 9:06 a.m., NIKHIL PATIL wrote: > > I changed in local.conf (ostree related stuffs ), and put it for > > compilation , that time i got these error > > Hi Nikhil, > > We encourage people to avoid top-posting so that discussions are > easier to read: > > > https://wiki.yoctoproject.org/wiki/Community_Guidelines#Mailing_List_Guidelines > > Your description doesn't enable anyone else to reproduce what you are > doing. What git repos (oe-core/poky/bitbake/...) are you using and > what commit is at the HEAD of each? > > You have no doubt sourced the oe-init-build-env file, otherwise bitbake > wouldn't work. Can you do that again and send either your full > conf/local.conf file or the lines that you added. > > > You might read: > https://wiki.yoctoproject.org/wiki/Bug_reporting_and_Information_levels > It's aimed at people opening bugs in the YP Bugzilla but the same rules > apply to email asking for help. > > > > > On Tue, Oct 20, 2020 at 6:49 AM Randy MacLeod > > <randy.macleod@windriver.com <mailto:randy.macleod@windriver.com>> > wrote: > > > > On 2020-10-18 6:41 a.m., NIKHIL PATIL wrote: > > > Hi team , > > > I am getting continuously dnf error, How we can > > resolve these . > > > > Hi Nikhil, > > > > What exact steps did you take before getting this error and > > what build host are you using? > > > > Are you able to build core-image-minimal using oe-core/master > > and the default local.conf for qemux86-64? > > Please confirm that you are able to build core-image-minimal so > that people understand your level of experience when trying to help you. > > ../Randy > > > > > ../Randy > > > > > > > > core-image-sato-1.0-r0 do_rootfs: Could not invoke dnf. Command > > > > > > '/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/recipe-sysroot-native/usr/bin/dnf > > > > > -y -c > > > > > > /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/dnf/dnf.conf > > > > > > > > --setopt=reposdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/yum.repos.d > > > > > > > > --repofrompath=oe-repo,/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo > > > > > > > > --installroot=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs > > > > > > > > --setopt=logdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/temp > > > > > -x packagegroup-core-apl-extra --nogpgcheck install > > autoconf-archive dnf > > > gstreamer1.0-vaapi iqvlinux jhi kernel-modules libtcti-device0 > > > libtcti-device-dev libtcti-device-staticdev libtcti-socket0 > > > libtcti-socket-dev libtcti-socket-staticdev libsapi0 libsapi-dev > > > libsapi-staticdev libva mesa-glxinfo libmraa1 nodejs > > > packagegroup-base-extended packagegroup-core-audio-essential > > > packagegroup-core-boot packagegroup-core-buildessential-extended > > > packagegroup-core-graphics-essential > packagegroup-core-ssh-dropbear > > > packagegroup-core-tools-testapps packagegroup-core-x11-base > > > packagegroup-core-x11-sato psplash rpm run-postinsts swig > tpm2-abrmd > > > usb-modeswitch usb-modeswitch-data va-intel wayland weston > > > weston-examples xinit-env xserver-xorg locale-base-en-us > > > locale-base-en-gb' returned 1: > > > Added oe-repo repo from > > > > > > /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo > > > > > > > > > > > > > > > > > > > > > -- > > # Randy MacLeod > > # Wind River Linux > > > > > -- > # Randy MacLeod > # Wind River Linux > [-- Attachment #1.2: Type: text/html, Size: 5704 bytes --] [-- Attachment #2: local.conf --] [-- Type: application/octet-stream, Size: 16199 bytes --] # This file is your local configuration file and is where all local user settings # are placed. The comments in this file give some guide to the options a new user # to the system might want to change but pretty much any configuration option can # be set in this file. More adventurous users can look at local.conf.extended # which contains other examples of configuration which can be placed in this file # but new users likely won't need any of them initially. # # Lines starting with the '#' character are commented out and in some cases the # default values are provided as comments to show people example syntax. Enabling # the option is a question of removing the # character and making any change to the # variable as required. # # Machine Selection # # This sets the default machine to be intel-corei7-64 if no other machine is selected: MACHINE = "intel-corei7-64" # This set the default kernel to linux-intel version 4.14 LTS PREFERRED_PROVIDER_virtual/kernel = "linux-intel" PREFERRED_VERSION_linux-intel = "4.14%" # # Leaf Hill BSP specific settings # # This sets BSP_SUBTYPE to leafhill. # This setting is meant for Bitbake to pull the correct set of # kernel config fragments in yocto-kernel-cache. # # It is not recommend to remove if your target platform is # based on Intel Atom E3900 SoC Family. BSP_SUBTYPE = "leafhill" #Exclude piglit, ltp and mesa-demos packages PACKAGE_EXCLUDE = "packagegroup-core-apl-extra" # # Apollo Lake Yocto BSP supports different Audio features, # i.e. legacy HD-Audio, CAVS HD-Audio, and CAVS SSP Audio codec support. # # By default, this configuration will build CAVS HD-Audio feature. # To build CAVS SSP Audio feature, uncomment the line below. #AUDIO_FEATURES = "ssp" # # Machine Configuration Override for Apollo Lake platform # # This is a stopgap measure for configuring machine settings for Apollo Lake platform # primarily for Pre-Production SW release until the changes are upstream to Yocto Project. # These settings are applicable for Intel Apollo Lake project only. # Please comment out when you are compiling for other projects. # Uncomment when you are integrating closed source media stack #MACHINE_HWCODECS = "" OLD_XSERVER_X86_EXT = "" XSERVER_X86_MATROX_MGA = "" XSERVER_X86_ASPEED_AST = "" MACHINE_ESSENTIAL_EXTRA_RDEPENDS_remove = "intel-microcode" INITRD_LIVE_remove = "${DEPLOY_DIR_IMAGE}/microcode.cpio" # Make image boot to runlevel 3 by default APPEND = "3 snd_hda_intel.power_save=1 snd_hda_intel.power_save_controller=y scsi_mod.scan=async i915.enable_guc_loading=1 reboot=efi console=ttyS2,115200n8" WKS_FILE = "systemd-bootdisk-microcode-custom.wks" # # User Space Configuration Override for Apollo Lake Platform # # Selection of jpeg package provider PREFERRED_PROVIDER_jpeg = "jpeg" PREFERRED_PROVIDER_jpeg-native = "jpeg-native" # Enable xserver-xorg IMAGE_INSTALL_append = " xserver-xorg" # Enable vp8dec for gstreamer1.0-plugins-good PACKAGECONFIG_append_pn-gstreamer1.0-plugins-good = "vpx" # Multi-libraries support is by default "OFF" # Please uncomment the 4 lines below to enable multilib support. #require conf/multilib.conf #DEFAULTTUNE = "corei7-64" #MULTILIBS = "multilib:lib32" #DEFAULTTUNE_virtclass-multilib-lib32 = "corei7-32" # Install autoconf-archive IMAGE_INSTALL_append = " autoconf-archive" # Install libva IMAGE_INSTALL_append = " libva" # Install Wayland in image DISTRO_FEATURES_append = " wayland pam" CORE_IMAGE_EXTRA_INSTALL += "wayland weston weston-examples" # Install mesa glxinfo IMAGE_INSTALL_append = " mesa-glxinfo" # Install TPM2.0-TSS in image IMAGE_INSTALL_append = " libtss2 libtss2-dev libtctidevice libtctidevice-dev libtctisocket libtctisocket-dev" IMAGE_INSTALL_append = " libtss2-staticdev libtctisocket-staticdev libtctidevice-staticdev" # Install tpm2-abrmd in image IMAGE_INSTALL_append = " tpm2-abrmd" # Install MRAA and its dependencies in image IMAGE_INSTALL_append = " nodejs swig mraa" # Install USB-modeswitch and USB-modeswitch-data in image IMAGE_INSTALL_append = " usb-modeswitch usb-modeswitch-data" # Install JHI IMAGE_INSTALL_append = " jhi" # Install IQV driver IMAGE_INSTALL_append = " iqvlinux" # Disable lttng modules LTTNGMODULES_corei7-64-intel-common = "" # Install xinitrc environment file IMAGE_INSTALL_append = " xinit-env" # By default, we want our OS to includes all kernel modules. IMAGE_INSTALL_append = " kernel-modules" # Take note that as we are building 3rd party ingredient. # We need the LICENSE_FLAGS below. LICENSE_FLAGS_WHITELIST += "commercial" # Use systemd init instead of sysV init DISTRO_FEATURES_append = " systemd" VIRTUAL-RUNTIME_init_manager = "systemd" DISTRO_FEATURES_BACKFILL_CONSIDERED = "sysvinit" # # Where to place downloads # # During a first build the system will download many different source code tarballs # from various upstream projects. This can take a while, particularly if your network # connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you # can preserve this directory to speed up this part of subsequent builds. This directory # is safe to share between multiple builds on the same machine too. # # The default is a downloads directory under TOPDIR which is the build directory. # #DL_DIR ?= "${TOPDIR}/downloads" # # Where to place shared-state files # # BitBake has the capability to accelerate builds based on previously built output. # This is done using "shared state" files which can be thought of as cache objects # and this option determines where those files are placed. # # You can wipe out TMPDIR leaving this directory intact and the build would regenerate # from these files if no changes were made to the configuration. If changes were made # to the configuration, only shared state files where the state was still valid would # be used (done using checksums). # # The default is a sstate-cache directory under TOPDIR. # #SSTATE_DIR ?= "${TOPDIR}/sstate-cache" # # Where to place the build output # # This option specifies where the bulk of the building work should be done and # where BitBake should place its temporary files and output. Keep in mind that # this includes the extraction and compilation of many applications and the toolchain # which can use Gigabytes of hard disk space. # # The default is a tmp directory under TOPDIR. # #TMPDIR = "${TOPDIR}/tmp" # # Default policy config # # The distribution setting controls which policy settings are used as defaults. # The default value is fine for general Yocto project use, at least initially. # Ultimately when creating custom policy, people will likely end up subclassing # these defaults. # DISTRO ?= "poky" # As an example of a subclass there is a "bleeding" edge policy configuration # where many versions are set to the absolute latest code from the upstream # source control systems. This is just mentioned here as an example, its not # useful to most new users. # DISTRO ?= "poky-bleeding" # # Package Management configuration # # This variable lists which packaging formats to enable. Multiple package backends # can be enabled at once and the first item listed in the variable will be used # to generate the root filesystems. # Options are: # - 'package_deb' for debian style deb files # - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) # - 'package_rpm' for rpm style packages # E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" # We default to rpm: PACKAGE_CLASSES ?= "package_rpm" # # SDK/ADT target architecture # # This variable specifies the architecture to build SDK/ADT items for and means # you can build the SDK packages for architectures other than the machine you are # running the build on (i.e. building i686 packages on an x86_64 host). # Supported values are i686 and x86_64 #SDKMACHINE ?= "i686" # # Extra image configuration defaults # # The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated # images. Some of these options are added to certain image types automatically. The # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages # (useful if you want to run the package test suites) # "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) # "tools-debug" - add debugging tools (gdb, strace) # "eclipse-debug" - add Eclipse remote debugging support # "tools-profile" - add profiling tools (oprofile, exmap, lttng, valgrind) # "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) # "debug-tweaks" - make an image suitable for development # e.g. ssh root access has a blank password # There are other application targets that can be used here too, see # meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. # We default to enabling the debugging tweaks. EXTRA_IMAGE_FEATURES = "debug-tweaks tools-testapps" # # Additional image features # # The following is a list of additional classes to use when building images which # enable extra features. Some available options which can be included in this variable # are: # - 'buildstats' collect build statistics # - 'image-mklibs' to reduce shared library files size for an image # - 'image-prelink' in order to prelink the filesystem image # - 'image-swab' to perform host system intrusion detection # NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink # NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended USER_CLASSES ?= "buildstats image-mklibs image-prelink" # # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) # after any root filesystems are created and run tests against those images. To # enable this uncomment this line. See classes/testimage(-auto).bbclass for # further details. #TEST_IMAGE = "1" # # Interactive shell configuration # # Under certain circumstances the system may need input from you and to do this it # can launch an interactive shell. It needs to do this since the build is # multithreaded and needs to be able to handle the case where more than one parallel # process may require the user's attention. The default is iterate over the available # terminal types to find one that works. # # Examples of the occasions this may happen are when resolving patches which cannot # be applied, to use the devshell or the kernel menuconfig # # Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none # Note: currently, Konsole support only works for KDE 3.x due to the way # newer Konsole versions behave #OE_TERMINAL = "auto" # By default disable interactive patch resolution (tasks will just fail instead): PATCHRESOLVE = "noop" # # Disk Space Monitoring during the build # # Monitor the disk space during the build. If there is less that 1GB of space or less # than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully # shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort # of the build. The reason for this is that running completely out of space can corrupt # files and damages the build in ways which may not be easily recoverable. BB_DISKMON_DIRS = "\ STOPTASKS,${TMPDIR},1G,100K \ STOPTASKS,${DL_DIR},1G,100K \ STOPTASKS,${SSTATE_DIR},1G,100K \ ABORT,${TMPDIR},100M,1K \ ABORT,${DL_DIR},100M,1K \ ABORT,${SSTATE_DIR},100M,1K" # # Shared-state files from other locations # # As mentioned above, shared state files are prebuilt cache data objects which can # used to accelerate build time. This variable can be used to configure the system # to search other mirror locations for these objects before it builds the data itself. # # This can be a filesystem directory, or a remote url such as http or ftp. These # would contain the sstate-cache results from previous builds (possibly from other # machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the # cache locations to check for the shared objects. # NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH # at the end as shown in the examples below. This will be substituted with the # correct path within the directory structure. #SSTATE_MIRRORS ?= "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" # # Qemu configuration # # By default qemu will build with a builtin VNC server where graphical output can be # seen. The two lines below enable the SDL backend too. This assumes there is a # libsdl library available on your build system. #PACKAGECONFIG_append_pn-qemu-native = " sdl" #PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" #ASSUME_PROVIDED += "libsdl-native" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if # this doesn't mean anything to you. CONF_VERSION = "1" # Enable the security flags as per SDL 4.0 requirement require conf/distro/include/security_flags.inc SECURITY_CFLAGS = "-fstack-protector-strong -pie -fpie -D_FORTIFY_SOURCE=2 -O2 -Wformat -Wformat-security" SECURITY_NO_PIE_CFLAGS = "-fstack-protector-strong -D_FORTIFY_SOURCE=2 -O2 -Wformat -Wformat-security" SECURITY_LDFLAGS = "-Wl,-z,relro,-z,now,-z,noexecstack" #AmitK OTA support DISTRO = "poky-sota-systemd" SRCREV_FORMAT = "1" #LTE Support Added #IMAGE_INSTALL_append = " l89irnss" # General SOTA setup SOTA_CLIENT_PROV = "aktualizr-shared-prov" SOTA_PACKED_CREDENTIALS = "/praveen/inti_dmsv/yocto_build/credentials.zip" # Uncomment this line to start an ssh server at boot automatically #IMAGE_FEATURES += "ssh-server-dropbear" # Uncomment this line to set the log level of aktualizr to 'debug' (from 'info' # by default) #IMAGE_INSTALL_append += " aktualizr-log-debug" # Store systemd logs in persistent storage # # It greatly helps diagnosing issues on testing devices but should be # carefully weighted against file system usage and flash device wear for # production systems. Please refer to systemd's docs for more details IMAGE_INSTALL_append += " systemd-journald-persistent" OSTREE_BRANCHNAME = "crb-sota_test_new" OSTREE_REPO = "${HOME}/praveen/public_html/ostree/repo" OSTREE_REMOTE_URL = "http://192.168.150.11:8000" OSTREE_OSNAME = "inti_dmsv" #OSTREE_INITRAMFS_IMAGE ?= "initramfs-ostree-image" # Set resource limits for aktualizr service # # Uncomment these lines to change the default parameters. # #RESOURCE_CPU_WEIGHT_pn-aktualizr = "100" #RESOURCE_MEMORY_HIGH_pn-aktualizr = "100M" #RESOURCE_MEMORY_MAX_pn-aktualizr = "80%" IMAGE_INSTALL_append += " aktualizr-resource-control" #IMAGE_INSTALL_append += " openssh" #IMAGE_INSTALL_append += " openssh openssh-sftp" ################################################################################ #OSTREE_USE_AB ?= "1" #Add the extra space to keep absorve the changes #IMAGE_ROOTFS_EXTRA_SPACE= "2194304" #IMAGE_ROOTFS_EXTRA_SPACE= "2515968" INHERIT += "image-buildinfo" IMAGE_TYPE="sato" MY_BUILD_VERSION="1.0" DEVICE_MODEL="CRB" DEVICE_TYPE="${MACHINE}-${DEVICE_MODEL}" IMAGE_BUILDINFO_VARS = "DISTRO DISTRO_VERSION MACHINE DEVICE_MODEL DEVICE_TYPE MY_BUILD_VERSION IMAGE_TYPE" #Auto reboot support added IMAGE_INSTALL_append += " aktualizr-auto-reboot" IMAGE_INSTALL_append += " minicom" IMAGE_INSTALL_append += " hello" ################################################################################ CORE_IMAGE_EXTRA_INSTALL += " openobex obex-data-server obexftp bluez5" CORE_IMAGE_EXTRA_INSTALL += " bluez-tools" CORE_IMAGE_EXTRA_INSTALL += " systemd systemtap" CORE_IMAGE_EXTRA_INSTALL += " gcc gcc-sanitizers hostapd wpa-supplicant" CORE_IMAGE_EXTRA_INSTALL += " dhcpcd dhcp-dbg dhcp-dev dhcp-doc dhcp-libs dhcp-server dhcp-server-config dhcp-client dhcp-relay dhcp-omshell" ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [yocto] dnf error coming while compiling core-image-sato image. 2020-10-20 13:06 ` NIKHIL PATIL 2020-10-20 14:20 ` Randy MacLeod @ 2020-10-21 5:00 ` Yocto 2020-10-21 10:38 ` NIKHIL PATIL 1 sibling, 1 reply; 8+ messages in thread From: Yocto @ 2020-10-21 5:00 UTC (permalink / raw) To: yocto [-- Attachment #1: Type: text/plain, Size: 3048 bytes --] On 10/20/20 8:06 PM, NIKHIL PATIL wrote: > I changed in local.conf (ostree related stuffs ), and put it for > compilation , that time i got these error > > On Tue, Oct 20, 2020 at 6:49 AM Randy MacLeod > <randy.macleod@windriver.com <mailto:randy.macleod@windriver.com>> wrote: > > On 2020-10-18 6:41 a.m., NIKHIL PATIL wrote: > > Hi team , > > I am getting continuously dnf error, How we can > resolve these . > > Hi Nikhil, > > What exact steps did you take before getting this error and > what build host are you using? > > Are you able to build core-image-minimal using oe-core/master > and the default local.conf for qemux86-64? > > ../Randy > I can confirm that Ive also seen this trying to build in the Yocto build appliance I downloaded yesterday.... > > > > core-image-sato-1.0-r0 do_rootfs: Could not invoke dnf. Command > > > '/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/recipe-sysroot-native/usr/bin/dnf > > > -y -c > > > /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/dnf/dnf.conf > > > > --setopt=reposdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/yum.repos.d > > > > --repofrompath=oe-repo,/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo > > > > --installroot=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs > > > > --setopt=logdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/temp > > > -x packagegroup-core-apl-extra --nogpgcheck install > autoconf-archive dnf > > gstreamer1.0-vaapi iqvlinux jhi kernel-modules libtcti-device0 > > libtcti-device-dev libtcti-device-staticdev libtcti-socket0 > > libtcti-socket-dev libtcti-socket-staticdev libsapi0 libsapi-dev > > libsapi-staticdev libva mesa-glxinfo libmraa1 nodejs > > packagegroup-base-extended packagegroup-core-audio-essential > > packagegroup-core-boot packagegroup-core-buildessential-extended > > packagegroup-core-graphics-essential packagegroup-core-ssh-dropbear > > packagegroup-core-tools-testapps packagegroup-core-x11-base > > packagegroup-core-x11-sato psplash rpm run-postinsts swig > tpm2-abrmd > > usb-modeswitch usb-modeswitch-data va-intel wayland weston > > weston-examples xinit-env xserver-xorg locale-base-en-us > > locale-base-en-gb' returned 1: > > Added oe-repo repo from > > > /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo > > > > > > > > > > > > > -- > # Randy MacLeod > # Wind River Linux > > > > [-- Attachment #2: Type: text/html, Size: 5039 bytes --] ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [yocto] dnf error coming while compiling core-image-sato image. 2020-10-21 5:00 ` Yocto @ 2020-10-21 10:38 ` NIKHIL PATIL 2020-10-21 11:28 ` Yocto 0 siblings, 1 reply; 8+ messages in thread From: NIKHIL PATIL @ 2020-10-21 10:38 UTC (permalink / raw) To: Yocto; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 3109 bytes --] Hi team , I am assuming in local.conf we used DISTRO ?= "poky" and DISTRO = "poky-sota-systemd" both thats why we are getting these error or what ? On Wed, Oct 21, 2020 at 10:30 AM Yocto <yocto@optimcloud.com> wrote: > > On 10/20/20 8:06 PM, NIKHIL PATIL wrote: > > I changed in local.conf (ostree related stuffs ), and put it for > compilation , that time i got these error > > On Tue, Oct 20, 2020 at 6:49 AM Randy MacLeod <randy.macleod@windriver.com> > wrote: > >> On 2020-10-18 6:41 a.m., NIKHIL PATIL wrote: >> > Hi team , >> > I am getting continuously dnf error, How we can resolve these . >> >> Hi Nikhil, >> >> What exact steps did you take before getting this error and >> what build host are you using? >> >> Are you able to build core-image-minimal using oe-core/master >> and the default local.conf for qemux86-64? >> >> ../Randy >> >> I can confirm that Ive also seen this trying to build in the Yocto build > appliance I downloaded yesterday.... > > > > > >> > core-image-sato-1.0-r0 do_rootfs: Could not invoke dnf. Command >> > >> '/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/recipe-sysroot-native/usr/bin/dnf >> >> > -y -c >> > >> /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/dnf/dnf.conf >> >> > >> --setopt=reposdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/yum.repos.d >> >> > >> --repofrompath=oe-repo,/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo >> >> > >> --installroot=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs >> >> > >> --setopt=logdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/temp >> >> > -x packagegroup-core-apl-extra --nogpgcheck install autoconf-archive >> dnf >> > gstreamer1.0-vaapi iqvlinux jhi kernel-modules libtcti-device0 >> > libtcti-device-dev libtcti-device-staticdev libtcti-socket0 >> > libtcti-socket-dev libtcti-socket-staticdev libsapi0 libsapi-dev >> > libsapi-staticdev libva mesa-glxinfo libmraa1 nodejs >> > packagegroup-base-extended packagegroup-core-audio-essential >> > packagegroup-core-boot packagegroup-core-buildessential-extended >> > packagegroup-core-graphics-essential packagegroup-core-ssh-dropbear >> > packagegroup-core-tools-testapps packagegroup-core-x11-base >> > packagegroup-core-x11-sato psplash rpm run-postinsts swig tpm2-abrmd >> > usb-modeswitch usb-modeswitch-data va-intel wayland weston >> > weston-examples xinit-env xserver-xorg locale-base-en-us >> > locale-base-en-gb' returned 1: >> > Added oe-repo repo from >> > >> /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo >> > >> > >> > >> > >> > >> >> >> -- >> # Randy MacLeod >> # Wind River Linux >> > > > > > [-- Attachment #2: Type: text/html, Size: 5136 bytes --] ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [yocto] dnf error coming while compiling core-image-sato image. 2020-10-21 10:38 ` NIKHIL PATIL @ 2020-10-21 11:28 ` Yocto 0 siblings, 0 replies; 8+ messages in thread From: Yocto @ 2020-10-21 11:28 UTC (permalink / raw) To: yocto [-- Attachment #1: Type: text/plain, Size: 4988 bytes --] On 10/21/20 5:38 PM, NIKHIL PATIL wrote: > Hi team , > I am assuming in local.conf we used DISTRO ?= "poky" and DISTRO > = "poky-sota-systemd" both thats why we are getting these error or > what ? mmm nope... Build Configuration: BB_VERSION = "1.48.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "debian-10" TARGET_SYS = "x86_64-overc-linux" MACHINE = "intel-corei7-64" DISTRO = "overc" DISTRO_VERSION = "1.0" TUNE_FEATURES = "m64 corei7" TARGET_FPU = "" meta meta-poky meta-yocto-bsp = "master:4e4a302e37ac06543e9983773cdb4caf7728330d" meta-oe meta-python meta-networking meta-filesystems meta-gnome meta-multimedia meta-xfce meta-perl = "master:de8198b93f8e524ab2f64fd138185824a79b18e6" meta-overc meta-cube = "master:af81bc7ec63e96aa7816b523b75ad9f29f9dfcf0" meta-selinux = "master:6e1100d29aec118df2025c46c77f4c8aa8da4e76" meta-security = "master:e8c9e69c80ea2c525250e07db1024d8e34f1f0f8" meta-virtualization = "master:7a8167fa82621dd606260450b1e648e50a1d79ab" meta-cloud-services = "master:4f6cd1d6664ca1a51bdc742291fe4bf83ecf2a92" meta-intel = "master:0e4b3cb01735bdc5ebf50c547927f1f59b0248d2" > > On Wed, Oct 21, 2020 at 10:30 AM Yocto <yocto@optimcloud.com > <mailto:yocto@optimcloud.com>> wrote: > > > On 10/20/20 8:06 PM, NIKHIL PATIL wrote: >> I changed in local.conf (ostree related stuffs ), and put it for >> compilation , that time i got these error >> >> On Tue, Oct 20, 2020 at 6:49 AM Randy MacLeod >> <randy.macleod@windriver.com >> <mailto:randy.macleod@windriver.com>> wrote: >> >> On 2020-10-18 6:41 a.m., NIKHIL PATIL wrote: >> > Hi team , >> > I am getting continuously dnf error, How we can >> resolve these . >> >> Hi Nikhil, >> >> What exact steps did you take before getting this error and >> what build host are you using? >> >> Are you able to build core-image-minimal using oe-core/master >> and the default local.conf for qemux86-64? >> >> ../Randy >> > I can confirm that Ive also seen this trying to build in the Yocto > build appliance I downloaded yesterday.... > > > >> > >> > core-image-sato-1.0-r0 do_rootfs: Could not invoke dnf. >> Command >> > >> '/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/recipe-sysroot-native/usr/bin/dnf >> >> > -y -c >> > >> /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/dnf/dnf.conf >> >> > >> --setopt=reposdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/yum.repos.d >> >> > >> --repofrompath=oe-repo,/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo >> >> > >> --installroot=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs >> >> > >> --setopt=logdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/temp >> >> > -x packagegroup-core-apl-extra --nogpgcheck install >> autoconf-archive dnf >> > gstreamer1.0-vaapi iqvlinux jhi kernel-modules libtcti-device0 >> > libtcti-device-dev libtcti-device-staticdev libtcti-socket0 >> > libtcti-socket-dev libtcti-socket-staticdev libsapi0 >> libsapi-dev >> > libsapi-staticdev libva mesa-glxinfo libmraa1 nodejs >> > packagegroup-base-extended packagegroup-core-audio-essential >> > packagegroup-core-boot >> packagegroup-core-buildessential-extended >> > packagegroup-core-graphics-essential >> packagegroup-core-ssh-dropbear >> > packagegroup-core-tools-testapps packagegroup-core-x11-base >> > packagegroup-core-x11-sato psplash rpm run-postinsts swig >> tpm2-abrmd >> > usb-modeswitch usb-modeswitch-data va-intel wayland weston >> > weston-examples xinit-env xserver-xorg locale-base-en-us >> > locale-base-en-gb' returned 1: >> > Added oe-repo repo from >> > >> /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo >> > >> > >> > >> > >> > >> >> >> -- >> # Randy MacLeod >> # Wind River Linux >> >> > > > > > > [-- Attachment #2: Type: text/html, Size: 8802 bytes --] ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2020-10-21 11:28 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-10-18 10:41 dnf error coming while compiling core-image-sato image NIKHIL PATIL 2020-10-20 1:19 ` [yocto] " Randy MacLeod 2020-10-20 13:06 ` NIKHIL PATIL 2020-10-20 14:20 ` Randy MacLeod 2020-10-21 4:53 ` NIKHIL PATIL 2020-10-21 5:00 ` Yocto 2020-10-21 10:38 ` NIKHIL PATIL 2020-10-21 11:28 ` Yocto
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.