From: Axel Haslam <ahaslam@baylibre.com> To: David Lechner <david@lechnology.com> Cc: Greg KH <gregkh@linuxfoundation.org>, Johan Hovold <johan@kernel.org>, robh+dt@kernel.org, Sekhar Nori <nsekhar@ti.com>, Alan Stern <stern@rowland.harvard.edu>, Kevin Hilman <khilman@baylibre.com>, Sergei Shtylyov <sshtylyov@ru.mvista.com>, manjunath.goudar@linaro.org, Mark Brown <broonie@kernel.org>, Alexandre Bailon <abailon@baylibre.com>, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: Re: [PATCH/RFT v2 07/17] ARM: davinci: da8xx: Enable the usb20 "per" clk on phy_clk_enable Date: Tue, 25 Oct 2016 12:01:50 +0200 [thread overview] Message-ID: <CAKXjFTNXoGO-k1G+UqV+TQ0CKQmbtB12hHu_T2QibgmbB4SdXA@mail.gmail.com> (raw) In-Reply-To: <c2d31f5a-32c6-5e93-2d3d-d6ef75b697fc@lechnology.com> On Tue, Oct 25, 2016 at 4:53 AM, David Lechner <david@lechnology.com> wrote: > On 10/24/2016 11:46 AM, ahaslam@baylibre.com wrote: >> >> From: Axel Haslam <ahaslam@baylibre.com> >> >> While probing ochi phy with usb20 phy as a parent clock for usb11_phy, >> the usb20_phy clock enable would time out. This is because the usb20 >> module clock needs to enabled while trying to lock the usb20_phy PLL. >> >> Call clk enable and get for the usb20 peripheral before trying to >> enable the phy PLL. >> >> Signed-off-by: Axel Haslam <ahaslam@baylibre.com> >> --- > > > > This patch can be combined with "ARM: davinci: da8xx: add usb phy clocks" > since that patch has not been merged yet. yes, agree, these should be merged. > > If you like, I can resubmit my patches from this series along with the > changes from this patch. Ok, if you can resubmit those patches with this change included i can reference them and start making the series shorter. i will also submit in separate patches the regulator changes, as requested by Mark. Regards Axel. >
WARNING: multiple messages have this Message-ID (diff)
From: ahaslam@baylibre.com (Axel Haslam) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH/RFT v2 07/17] ARM: davinci: da8xx: Enable the usb20 "per" clk on phy_clk_enable Date: Tue, 25 Oct 2016 12:01:50 +0200 [thread overview] Message-ID: <CAKXjFTNXoGO-k1G+UqV+TQ0CKQmbtB12hHu_T2QibgmbB4SdXA@mail.gmail.com> (raw) In-Reply-To: <c2d31f5a-32c6-5e93-2d3d-d6ef75b697fc@lechnology.com> On Tue, Oct 25, 2016 at 4:53 AM, David Lechner <david@lechnology.com> wrote: > On 10/24/2016 11:46 AM, ahaslam at baylibre.com wrote: >> >> From: Axel Haslam <ahaslam@baylibre.com> >> >> While probing ochi phy with usb20 phy as a parent clock for usb11_phy, >> the usb20_phy clock enable would time out. This is because the usb20 >> module clock needs to enabled while trying to lock the usb20_phy PLL. >> >> Call clk enable and get for the usb20 peripheral before trying to >> enable the phy PLL. >> >> Signed-off-by: Axel Haslam <ahaslam@baylibre.com> >> --- > > > > This patch can be combined with "ARM: davinci: da8xx: add usb phy clocks" > since that patch has not been merged yet. yes, agree, these should be merged. > > If you like, I can resubmit my patches from this series along with the > changes from this patch. Ok, if you can resubmit those patches with this change included i can reference them and start making the series shorter. i will also submit in separate patches the regulator changes, as requested by Mark. Regards Axel. >
next prev parent reply other threads:[~2016-10-25 10:02 UTC|newest] Thread overview: 176+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-10-24 16:46 [PATCH/RFT v2 00/17] Add DT support for ohci-da8xx ahaslam 2016-10-24 16:46 ` ahaslam at baylibre.com 2016-10-24 16:46 ` [PATCH/RFT v2 01/17] ARM: davinci: da8xx: add usb phy clocks ahaslam 2016-10-24 16:46 ` ahaslam at baylibre.com 2016-10-24 16:46 ` [PATCH/RFT v2 02/17] ARM: davinci: da8xx: Add CFGCHIP syscon platform declaration ahaslam 2016-10-24 16:46 ` ahaslam at baylibre.com 2016-10-24 16:46 ` ahaslam-rdvid1DuHRBWk0Htik3J/w 2016-10-25 8:10 ` Sekhar Nori 2016-10-25 8:10 ` Sekhar Nori 2016-10-25 8:10 ` Sekhar Nori 2016-10-25 9:37 ` Axel Haslam 2016-10-25 9:37 ` Axel Haslam 2016-10-25 9:37 ` Axel Haslam 2016-10-25 10:17 ` Sekhar Nori 2016-10-25 10:17 ` Sekhar Nori 2016-10-25 10:17 ` Sekhar Nori 2016-10-25 15:53 ` David Lechner 2016-10-25 15:53 ` David Lechner 2016-10-25 15:53 ` David Lechner 2016-10-26 8:56 ` Sekhar Nori 2016-10-26 8:56 ` Sekhar Nori 2016-10-26 8:56 ` Sekhar Nori 2016-10-24 16:46 ` [PATCH/RFT v2 03/17] ARM: davinci: da8xx: Add USB PHY " ahaslam 2016-10-24 16:46 ` ahaslam at baylibre.com 2016-10-24 16:46 ` ahaslam-rdvid1DuHRBWk0Htik3J/w 2016-10-25 9:18 ` Sekhar Nori 2016-10-25 9:18 ` Sekhar Nori 2016-10-25 9:18 ` Sekhar Nori 2016-10-25 9:37 ` Axel Haslam 2016-10-25 9:37 ` Axel Haslam 2016-10-25 9:37 ` Axel Haslam 2016-10-24 16:46 ` [PATCH/RFT v2 04/17] ARM: DTS: da850: Add cfgchip syscon node ahaslam 2016-10-24 16:46 ` ahaslam at baylibre.com 2016-10-24 16:46 ` ahaslam 2016-10-24 16:46 ` [PATCH/RFT v2 05/17] ARM: DTS: da850: Add usb phy node ahaslam 2016-10-24 16:46 ` ahaslam at baylibre.com 2016-10-24 16:46 ` ahaslam 2016-10-24 16:46 ` [PATCH/RFT v2 06/17] ARM: davinci: da8xx: Fix some redefined symbol warnings ahaslam 2016-10-24 16:46 ` ahaslam at baylibre.com 2016-10-24 16:46 ` ahaslam-rdvid1DuHRBWk0Htik3J/w 2016-10-25 10:03 ` Sekhar Nori 2016-10-25 10:03 ` Sekhar Nori 2016-10-25 10:03 ` Sekhar Nori 2016-10-25 12:14 ` Alexandre Bailon 2016-10-25 12:14 ` Alexandre Bailon 2016-10-25 12:14 ` Alexandre Bailon 2016-10-24 16:46 ` [PATCH/RFT v2 07/17] ARM: davinci: da8xx: Enable the usb20 "per" clk on phy_clk_enable ahaslam 2016-10-24 16:46 ` ahaslam at baylibre.com 2016-10-24 16:46 ` ahaslam 2016-10-25 2:53 ` David Lechner 2016-10-25 2:53 ` David Lechner 2016-10-25 10:01 ` Axel Haslam [this message] 2016-10-25 10:01 ` Axel Haslam 2016-10-25 10:12 ` Sekhar Nori 2016-10-25 10:12 ` Sekhar Nori 2016-10-25 10:12 ` Sekhar Nori 2016-10-25 16:05 ` David Lechner 2016-10-25 16:05 ` David Lechner 2016-10-25 16:05 ` David Lechner 2016-10-26 9:30 ` Sekhar Nori 2016-10-26 9:30 ` Sekhar Nori 2016-10-26 9:30 ` Sekhar Nori 2016-10-24 16:46 ` [PATCH/RFT v2 08/17] ARM: davinci: hawk: add full constraints for ohci plat boot ahaslam 2016-10-24 16:46 ` ahaslam at baylibre.com 2016-10-25 10:28 ` Sekhar Nori 2016-10-25 10:28 ` Sekhar Nori 2016-10-25 10:28 ` Sekhar Nori 2016-10-25 10:31 ` Axel Haslam 2016-10-25 10:31 ` Axel Haslam 2016-10-25 10:31 ` Axel Haslam 2016-10-24 16:46 ` [PATCH/RFT v2 09/17] regulator: fixed: Add over current event ahaslam 2016-10-24 16:46 ` ahaslam at baylibre.com 2016-10-24 16:46 ` ahaslam-rdvid1DuHRBWk0Htik3J/w 2016-10-24 17:43 ` Mark Brown 2016-10-24 17:43 ` Mark Brown 2016-10-24 17:43 ` Mark Brown 2016-10-24 17:53 ` Axel Haslam 2016-10-24 17:53 ` Axel Haslam 2016-10-24 17:53 ` Mark Brown 2016-10-24 17:53 ` Mark Brown 2016-10-24 17:53 ` Mark Brown 2016-10-24 18:11 ` Axel Haslam 2016-10-24 18:11 ` Axel Haslam 2016-10-24 18:11 ` Axel Haslam 2016-10-24 18:19 ` Mark Brown 2016-10-24 18:19 ` Mark Brown 2016-10-25 12:55 ` Axel Haslam 2016-10-25 12:55 ` Axel Haslam 2016-10-25 14:33 ` Mark Brown 2016-10-25 14:33 ` Mark Brown 2016-10-25 14:57 ` Axel Haslam 2016-10-25 14:57 ` Axel Haslam 2016-10-25 15:07 ` Axel Haslam 2016-10-25 15:07 ` Axel Haslam 2016-10-30 20:42 ` Rob Herring 2016-10-30 20:42 ` Rob Herring 2016-10-24 16:46 ` [PATCH/RFT v2 10/17] USB: da8xx: use flag instead of bitmask for over current change ahaslam 2016-10-24 16:46 ` ahaslam at baylibre.com 2016-10-24 16:46 ` ahaslam-rdvid1DuHRBWk0Htik3J/w 2016-10-24 16:46 ` [PATCH/RFT v2 11/17] USB: OHCI: make ohci-da8xx a separate driver ahaslam 2016-10-24 16:46 ` ahaslam at baylibre.com 2016-10-24 16:46 ` ahaslam-rdvid1DuHRBWk0Htik3J/w 2016-10-25 0:38 ` David Lechner 2016-10-25 0:38 ` David Lechner 2016-10-25 0:38 ` David Lechner 2016-10-25 7:39 ` Axel Haslam 2016-10-25 7:39 ` Axel Haslam 2016-10-25 7:39 ` Axel Haslam 2016-10-25 16:12 ` David Lechner 2016-10-25 16:12 ` David Lechner 2016-10-25 16:12 ` David Lechner 2016-10-25 16:21 ` Axel Haslam 2016-10-25 16:21 ` Axel Haslam 2016-10-25 16:21 ` Axel Haslam 2016-10-25 16:24 ` David Lechner 2016-10-25 16:24 ` David Lechner 2016-10-25 16:24 ` David Lechner 2016-10-24 16:46 ` [PATCH/RFT v2 12/17] USB: ochi-da8xx: Use a regulator for vbus/overcurrent ahaslam 2016-10-24 16:46 ` ahaslam at baylibre.com 2016-10-24 16:46 ` ahaslam-rdvid1DuHRBWk0Htik3J/w 2016-10-25 1:39 ` David Lechner 2016-10-25 1:39 ` David Lechner 2016-10-25 1:39 ` David Lechner 2016-10-25 8:24 ` Axel Haslam 2016-10-25 8:24 ` Axel Haslam 2016-10-25 8:24 ` Axel Haslam 2016-10-25 16:53 ` David Lechner 2016-10-25 16:53 ` David Lechner 2016-10-25 16:53 ` David Lechner 2016-10-25 17:32 ` Axel Haslam 2016-10-25 17:32 ` Axel Haslam 2016-10-25 10:43 ` Sekhar Nori 2016-10-25 10:43 ` Sekhar Nori 2016-10-25 10:43 ` Sekhar Nori 2016-10-25 10:52 ` Axel Haslam 2016-10-25 10:52 ` Axel Haslam 2016-10-25 10:52 ` Axel Haslam 2016-10-24 16:46 ` [PATCH/RFT v2 13/17] USB: da8xx: use ohci priv data instead of globals ahaslam 2016-10-24 16:46 ` ahaslam at baylibre.com 2016-10-24 16:46 ` ahaslam-rdvid1DuHRBWk0Htik3J/w 2016-10-25 1:12 ` David Lechner 2016-10-25 1:12 ` David Lechner 2016-10-25 1:12 ` David Lechner 2016-10-25 9:56 ` Axel Haslam 2016-10-25 9:56 ` Axel Haslam 2016-10-24 16:46 ` [PATCH/RFT v2 14/17] ARM: davinci: register the usb20_phy clock on the DT file ahaslam 2016-10-24 16:46 ` ahaslam at baylibre.com 2016-10-24 16:46 ` ahaslam-rdvid1DuHRBWk0Htik3J/w 2016-10-24 16:46 ` [PATCH/RFT v2 15/17] usb: host: ohci-da8xx: Add devicetree bindings documentation ahaslam 2016-10-24 16:46 ` ahaslam at baylibre.com 2016-10-24 16:46 ` ahaslam-rdvid1DuHRBWk0Htik3J/w 2016-10-25 1:02 ` David Lechner 2016-10-25 1:02 ` David Lechner 2016-10-25 1:02 ` David Lechner 2016-10-25 9:56 ` Axel Haslam 2016-10-25 9:56 ` Axel Haslam 2016-10-25 9:56 ` Axel Haslam 2016-10-24 16:46 ` [PATCH/RFT v2 16/17] USB: ohci-da8xx: Allow probing from DT ahaslam 2016-10-24 16:46 ` ahaslam at baylibre.com 2016-10-24 16:46 ` ahaslam-rdvid1DuHRBWk0Htik3J/w 2016-10-25 0:53 ` David Lechner 2016-10-25 0:53 ` David Lechner 2016-10-25 0:53 ` David Lechner 2016-10-25 8:10 ` Axel Haslam 2016-10-25 8:10 ` Axel Haslam 2016-10-24 16:46 ` [PATCH/RFT v2 17/17] ARM: dts: da850: add usb device node ahaslam 2016-10-24 16:46 ` ahaslam at baylibre.com 2016-10-25 0:48 ` David Lechner 2016-10-25 0:48 ` David Lechner 2016-10-25 0:48 ` David Lechner 2016-10-25 8:03 ` Axel Haslam 2016-10-25 8:03 ` Axel Haslam 2016-10-25 8:03 ` Axel Haslam 2016-10-25 10:55 ` [PATCH/RFT v2 00/17] Add DT support for ohci-da8xx Sekhar Nori 2016-10-25 10:55 ` Sekhar Nori 2016-10-25 10:55 ` Sekhar Nori
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=CAKXjFTNXoGO-k1G+UqV+TQ0CKQmbtB12hHu_T2QibgmbB4SdXA@mail.gmail.com \ --to=ahaslam@baylibre.com \ --cc=abailon@baylibre.com \ --cc=broonie@kernel.org \ --cc=david@lechnology.com \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=johan@kernel.org \ --cc=khilman@baylibre.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=manjunath.goudar@linaro.org \ --cc=nsekhar@ti.com \ --cc=robh+dt@kernel.org \ --cc=sshtylyov@ru.mvista.com \ --cc=stern@rowland.harvard.edu \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.