From: Vincent Guittot <vincent.guittot@linaro.org> To: Tony Lindgren <tony@atomide.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>, Ulf Hansson <ulf.hansson@linaro.org>, "open list:THERMAL" <linux-pm@vger.kernel.org>, linux-kernel <linux-kernel@vger.kernel.org>, LAK <linux-arm-kernel@lists.infradead.org>, linux-omap@vger.kernel.org Subject: Re: Regression in v5.0-rc1 with autosuspend hrtimers Date: Tue, 8 Jan 2019 08:59:56 +0100 [thread overview] Message-ID: <CAKfTPtDBEmcsLotp-6K1KU1wM9Ba1EpMp3niXScRxYgzjs0nog@mail.gmail.com> (raw) In-Reply-To: <20190107233833.GI5544@atomide.com> Hi Tony, On Tue, 8 Jan 2019 at 00:38, Tony Lindgren <tony@atomide.com> wrote: > > Hi all, > > Looks like commit 8234f6734c5d ("PM-runtime: Switch autosuspend > over to using hrtimers") caused a regression on at least > omap5-uevm where 8250 UART rx wake no longer works. I have not > noticed this happening on others so far. > > The devices I've tested all are using 8250 with dedicated > wakeirqs configured for the rx pin. I can see the interrupt > increase on omap5-uevm after some one or more keypresses, > but then nothing. It seems that the uart just falls back > asleep right away or something. > > Any ideas what might be going wrong? What is the autosuspend value ? Can it be that the autosuspend is set to a short value but was finally greater than 10-20ms on arm32. And now the autosuspend happens before and this has changed the sequence ? Regards, Vincent > > Regards, > > Tony >
WARNING: multiple messages have this Message-ID (diff)
From: Vincent Guittot <vincent.guittot@linaro.org> To: Tony Lindgren <tony@atomide.com> Cc: Ulf Hansson <ulf.hansson@linaro.org>, "open list:THERMAL" <linux-pm@vger.kernel.org>, "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>, linux-kernel <linux-kernel@vger.kernel.org>, linux-omap@vger.kernel.org, LAK <linux-arm-kernel@lists.infradead.org> Subject: Re: Regression in v5.0-rc1 with autosuspend hrtimers Date: Tue, 8 Jan 2019 08:59:56 +0100 [thread overview] Message-ID: <CAKfTPtDBEmcsLotp-6K1KU1wM9Ba1EpMp3niXScRxYgzjs0nog@mail.gmail.com> (raw) In-Reply-To: <20190107233833.GI5544@atomide.com> Hi Tony, On Tue, 8 Jan 2019 at 00:38, Tony Lindgren <tony@atomide.com> wrote: > > Hi all, > > Looks like commit 8234f6734c5d ("PM-runtime: Switch autosuspend > over to using hrtimers") caused a regression on at least > omap5-uevm where 8250 UART rx wake no longer works. I have not > noticed this happening on others so far. > > The devices I've tested all are using 8250 with dedicated > wakeirqs configured for the rx pin. I can see the interrupt > increase on omap5-uevm after some one or more keypresses, > but then nothing. It seems that the uart just falls back > asleep right away or something. > > Any ideas what might be going wrong? What is the autosuspend value ? Can it be that the autosuspend is set to a short value but was finally greater than 10-20ms on arm32. And now the autosuspend happens before and this has changed the sequence ? Regards, Vincent > > Regards, > > Tony > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-01-08 8:00 UTC|newest] Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-01-07 23:38 Regression in v5.0-rc1 with autosuspend hrtimers Tony Lindgren 2019-01-07 23:38 ` Tony Lindgren 2019-01-08 7:59 ` Vincent Guittot [this message] 2019-01-08 7:59 ` Vincent Guittot 2019-01-08 15:53 ` Tony Lindgren 2019-01-08 15:53 ` Tony Lindgren 2019-01-08 16:42 ` Vincent Guittot 2019-01-08 16:42 ` Vincent Guittot 2019-01-08 21:37 ` Tony Lindgren 2019-01-08 21:37 ` Tony Lindgren 2019-01-09 1:42 ` Vincent Guittot 2019-01-09 1:42 ` Vincent Guittot 2019-01-09 1:51 ` Tony Lindgren 2019-01-09 1:51 ` Tony Lindgren 2019-01-09 9:43 ` Rafael J. Wysocki 2019-01-09 9:43 ` Rafael J. Wysocki 2019-01-09 16:28 ` Tony Lindgren 2019-01-09 16:28 ` Tony Lindgren 2019-01-09 16:48 ` Vincent Guittot 2019-01-09 16:48 ` Vincent Guittot 2019-01-09 16:50 ` Tony Lindgren 2019-01-09 16:50 ` Tony Lindgren 2019-01-09 16:55 ` Vincent Guittot 2019-01-09 16:55 ` Vincent Guittot 2019-01-09 17:02 ` Tony Lindgren 2019-01-09 17:02 ` Tony Lindgren 2019-01-09 11:17 ` Ladislav Michl 2019-01-09 11:17 ` Ladislav Michl 2019-01-09 11:27 ` Vincent Guittot 2019-01-09 11:27 ` Vincent Guittot [not found] ` <20190109115824.GA1353@lenoch> 2019-01-09 13:24 ` Vincent Guittot 2019-01-09 13:24 ` Vincent Guittot [not found] ` <20190109133337.GA13579@lenoch> 2019-01-09 14:12 ` Vincent Guittot 2019-01-09 14:12 ` Vincent Guittot 2019-01-09 16:07 ` Ladislav Michl 2019-01-09 16:07 ` Ladislav Michl 2019-01-09 16:32 ` Vincent Guittot 2019-01-09 16:32 ` Vincent Guittot 2019-01-09 17:26 ` Ladislav Michl 2019-01-09 17:26 ` Ladislav Michl 2019-01-09 18:04 ` Vincent Guittot 2019-01-09 18:04 ` Vincent Guittot 2019-01-09 22:06 ` Rafael J. Wysocki 2019-01-09 22:06 ` Rafael J. Wysocki 2019-01-10 7:45 ` Ladislav Michl 2019-01-10 7:45 ` Ladislav Michl 2019-01-10 7:50 ` Vincent Guittot 2019-01-10 7:50 ` Vincent Guittot 2019-01-10 7:54 ` Ladislav Michl 2019-01-10 7:54 ` Ladislav Michl
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=CAKfTPtDBEmcsLotp-6K1KU1wM9Ba1EpMp3niXScRxYgzjs0nog@mail.gmail.com \ --to=vincent.guittot@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=rafael.j.wysocki@intel.com \ --cc=tony@atomide.com \ --cc=ulf.hansson@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.