[PATCH 5.10.y-cip 00/24] Add RZ/{G2LC, V2L} support

[PATCH 5.10.y-cip 00/24] Add RZ/{G2LC, V2L} support

[Biju Das]

This patch series aims to add Basic board support for SMARC EVK
based on RZ/G2LC and RZ/V2L SoC. RZ/{G2L, G2LC, V2L} share the same
SMARC EVK board, but SoM is different and pin mapping of SoM
module is different.

All these patches are cherry-picked from the mainline.

Subsequent patch series will add more functionality to these platforms.

RZ/G2LC SMARC EVK logs:
root@smarc-rzg2lc:~# cat /sys/devices/soc0/family
RZ/G2L
root@smarc-rzg2lc:~# cat /sys/devices/soc0/machine
Renesas SMARC EVK based on r9a07g044c2
root@smarc-rzg2lc:~# cat /sys/devices/soc0/revision
1
root@smarc-rzg2lc:~# cat /sys/devices/soc0/soc_id
r9a07g044
root@smarc-rzg2lc:~# dmesg  | grep Detect
[    0.003208] Detected Renesas RZ/G2L r9a07g044 Rev 1

RZ/V2L SMARC EVK logs:
root@smarc-rzv2l:~# cat /sys/devices/soc0/family
RZ/V2L
root@smarc-rzv2l:~# cat /sys/devices/soc0/machine
Renesas SMARC EVK based on r9a07g054l2
root@smarc-rzv2l:~# cat /sys/devices/soc0/revision
0
root@smarc-rzv2l:~# cat /sys/devices/soc0/soc_id
r9a07g054
root@smarc-rzv2l:~# dmesg  | grep Detect
[    0.003260] Detected Renesas RZ/V2L r9a07g054 Rev 0

Biju Das (20):
  arm64: dts: renesas: Add initial DTSI for RZ/G2LC SoC
  arm64: dts: renesas: Add initial device tree for RZ/G2LC SMARC EVK
  arm64: dts: renesas: rzg2lc-smarc-som: Enable eMMC on SMARC platform
  arm64: dts: renesas: rzg2lc-smarc: Enable microSD on SMARC platform
  clk: renesas: r9a07g044: Add mux and divider for G clock
  clk: renesas: r9a07g044: Add GPU clock and reset entries
  dt-bindings: clock: Add R9A07G054 CPG Clock and Reset Definitions
  dt-bindings: clock: renesas: Document RZ/V2L SoC
  clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoC
  dt-bindings: serial: renesas,scif: Document RZ/V2L SoC
  dt-bindings: serial: renesas,sci: Document RZ/V2L SoC
  dt-bindings: pinctrl: renesas: Document RZ/V2L pinctrl
  pinctrl: renesas: Kconfig: Select PINCTRL_RZG2L if RZ/V2L SoC is
    enabled
  pinctrl: renesas: rzg2l: Improve rzg2l_gpio_register()
  dt-bindings: net: renesas,etheravb: Document RZ/V2L SoC
  arm64: dts: renesas: Add initial DTSI for RZ/V2L SoC
  arm64: dts: renesas: Add initial device tree for RZ/V2L SMARC EVK
  arm64: dts: renesas: rzg2l-smarc: Add common dtsi file
  arm64: dts: renesas: rzg2lc-smarc: Add macros for DIP-Switch settings
  arm64: dts: renesas: rzg2lc-smarc: Enable SCIF1 on carrier board

Geert Uytterhoeven (1):
  clk: renesas: rzg2l: Simplify multiplication/shift logic

Lad Prabhakar (2):
  clk: renesas: r9a07g044: Update multiplier and divider values for
    PLL2/3
  arm64: defconfig: Enable ARCH_R9A07G054

Phil Edworthy (1):
  clk: renesas: rzg2l: Remove unused notifiers

 .../bindings/clock/renesas,rzg2l-cpg.yaml     |  14 +-
 .../bindings/net/renesas,etheravb.yaml        |   3 +-
 .../pinctrl/renesas,rzg2l-pinctrl.yaml        |  15 +-
 .../bindings/serial/renesas,sci.yaml          |   2 +
 .../bindings/serial/renesas,scif.yaml         |   7 +
 arch/arm64/boot/dts/renesas/Makefile          |   3 +
 arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi  |  32 ++
 .../boot/dts/renesas/r9a07g044c2-smarc.dts    |  97 ++++
 arch/arm64/boot/dts/renesas/r9a07g044c2.dtsi  |  20 +
 .../boot/dts/renesas/r9a07g044l2-smarc.dts    |   1 +
 arch/arm64/boot/dts/renesas/r9a07g054.dtsi    | 491 ++++++++++++++++++
 arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi  |  25 +
 .../boot/dts/renesas/r9a07g054l2-smarc.dts    |  26 +
 arch/arm64/boot/dts/renesas/r9a07g054l2.dtsi  |  13 +
 .../boot/dts/renesas/rz-smarc-common.dtsi     | 207 ++++++++
 .../dts/renesas/rzg2l-smarc-pinfunction.dtsi  |   2 +-
 .../boot/dts/renesas/rzg2l-smarc-som.dtsi     |   2 +-
 arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi  | 195 +------
 .../dts/renesas/rzg2lc-smarc-pinfunction.dtsi |  71 +++
 .../boot/dts/renesas/rzg2lc-smarc-som.dtsi    | 218 ++++++++
 arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi |  62 +++
 arch/arm64/configs/defconfig                  |   1 +
 drivers/clk/renesas/Kconfig                   |   7 +-
 drivers/clk/renesas/Makefile                  |   1 +
 drivers/clk/renesas/r9a07g044-cpg.c           | 421 ++++++++-------
 drivers/clk/renesas/rzg2l-cpg.c               |  10 +-
 drivers/clk/renesas/rzg2l-cpg.h               |   5 +
 drivers/pinctrl/renesas/Kconfig               |   6 +-
 drivers/pinctrl/renesas/pinctrl-rzg2l.c       |   4 +-
 include/dt-bindings/clock/r9a07g054-cpg.h     | 229 ++++++++
 30 files changed, 1795 insertions(+), 395 deletions(-)
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044c2.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g054.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g054l2.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
 create mode 100644 include/dt-bindings/clock/r9a07g054-cpg.h

-- 
2.25.1

[PATCH 5.10.y-cip 01/24] arm64: dts: renesas: Add initial DTSI for RZ/G2LC SoC

[Biju Das]

commit 3a3c2a48d8c6ba586a2eda249b0e2f5f19609dfd upstream.

The RZ/G2L and RZ/G2LC SoCs are similar and they share the same DEVID.
RZ/G2LC has fewer peripherals compared to RZ/G2L.

SSI (3 channels vs 4 channels)
GbEthernet (1 channel vs 2 channels)
SCIFA (4 channels vs 5 channels)
ADC is only supported in RZ/G2L.

Add the initial DTSI for the RZ/G2LC SoC by reusing the common
r9a07g044.dtsi file with unsupported device nodes deleted in the below
SoC specific dtsi files.

r9a07g044c1.dtsi => RZ/G2LC R9A07G044C1 SoC specific parts
r9a07g044c2.dtsi => RZ/G2LC R9A07G044C2 SoC specific parts

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211216114305.5842-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi | 32 ++++++++++++++++++++
 arch/arm64/boot/dts/renesas/r9a07g044c2.dtsi | 20 ++++++++++++
 2 files changed, 52 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044c2.dtsi

diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi
new file mode 100644
index 000000000000..1d57df706939
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC R9A07G044C1 SoC specific parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044.dtsi"
+
+/ {
+	compatible = "renesas,r9a07g044c1", "renesas,r9a07g044";
+
+	cpus {
+		/delete-node/ cpu-map;
+		/delete-node/ cpu@100;
+	};
+
+	timer {
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
+
+&soc {
+	/delete-node/ ssi@1004a800;
+	/delete-node/ serial@1004c800;
+	/delete-node/ adc@10059000;
+	/delete-node/ ethernet@11c30000;
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044c2.dtsi
new file mode 100644
index 000000000000..7bb8917fe421
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c2.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC R9A07G044C2 SoC specific parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044.dtsi"
+
+/ {
+	compatible = "renesas,r9a07g044c2", "renesas,r9a07g044";
+};
+
+&soc {
+	/delete-node/ ssi@1004a800;
+	/delete-node/ serial@1004c800;
+	/delete-node/ adc@10059000;
+	/delete-node/ ethernet@11c30000;
+};
-- 
2.25.1

[PATCH 5.10.y-cip 02/24] arm64: dts: renesas: Add initial device tree for RZ/G2LC SMARC EVK

[Biju Das]

commit ce0c63b6a5ef86208d1008ce6c42a7a7180aaf75 upstream.

Add basic support for the RZ/G2LC SMARC EVK (based on R9A07G044C2):
- memory
- External input clock
- SCIF
- GbEthernet
- Audio Clock

It shares the same carrier board with RZ/G2L, but the pin mapping is
different.  Disable the device nodes which are not tested and delete the
corresponding pinctrl definitions.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211216114305.5842-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/Makefile          |   1 +
 .../boot/dts/renesas/r9a07g044c2-smarc.dts    | 114 ++++++++++++++++++
 .../dts/renesas/rzg2lc-smarc-pinfunction.dtsi |  25 ++++
 .../boot/dts/renesas/rzg2lc-smarc-som.dtsi    |  76 ++++++++++++
 4 files changed, 216 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
 create mode 100644 arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 8a5bc12a6d8d..962a66332236 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -57,4 +57,5 @@ dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
 
 dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb
 
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc.dtb
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
new file mode 100644
index 000000000000..728a2275ea8d
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC SMARC EVK board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044c2.dtsi"
+#include "rzg2lc-smarc-som.dtsi"
+#include "rzg2lc-smarc-pinfunction.dtsi"
+#include "rzg2l-smarc.dtsi"
+
+/ {
+	model = "Renesas SMARC EVK based on r9a07g044c2";
+	compatible = "renesas,smarc-evk", "renesas,r9a07g044c2", "renesas,r9a07g044";
+
+};
+
+&canfd {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&ehci0 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&ehci1 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&hsusb {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&i2c0 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&i2c1 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&i2c3 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&ohci0 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&ohci1 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&phyrst {
+	status = "disabled";
+};
+
+&scif2 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&sdhi1 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-1;
+	/delete-property/ pinctrl-names;
+	/delete-property/ vmmc-supply;
+	status = "disabled";
+};
+
+&spi1 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&ssi0 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&usb2_phy0 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&usb2_phy1 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
new file mode 100644
index 000000000000..5333a1f9a0e7
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC SMARC pincontrol parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+&pinctrl {
+	pinctrl-0 = <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	scif0_pins: scif0 {
+		pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>,	/* TxD */
+			 <RZG2L_PORT_PINMUX(38, 1, 1)>;	/* RxD */
+	};
+
+	sound_clk_pins: sound_clk {
+		pins = "AUDIO_CLK1", "AUDIO_CLK2";
+		input-enable;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
new file mode 100644
index 000000000000..e1d7a3a689c6
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC SMARC SOM common parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/ {
+	aliases {
+		ethernet0 = &eth0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+};
+
+&eth0 {
+	pinctrl-0 = <&eth0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy0: ethernet-phy@7 {
+		compatible = "ethernet-phy-id0022.1640",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+		rxc-skew-psec = <2400>;
+		txc-skew-psec = <2400>;
+		rxdv-skew-psec = <0>;
+		txdv-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <24000000>;
+};
+
+&pinctrl {
+	eth0_pins: eth0 {
+		pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */
+			 <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */
+			 <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */
+			 <RZG2L_PORT_PINMUX(20, 0, 1)>, /* ET0_TXC */
+			 <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */
+			 <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */
+			 <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */
+			 <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */
+			 <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */
+			 <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */
+			 <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */
+			 <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */
+			 <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */
+			 <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */
+			 <RZG2L_PORT_PINMUX(26, 1, 1)>; /* ET0_RXD3 */
+	};
+};
+
-- 
2.25.1

[PATCH 5.10.y-cip 03/24] arm64: dts: renesas: rzg2lc-smarc-som: Enable eMMC on SMARC platform

[Biju Das]

commit 7ca0ce6478c6803c9f86e7366f5634de9c096207 upstream.

RZ/G2LC SoM has both 64 GB eMMC and microSD connected to SDHI0.

Both these interfaces are mutually exclusive and the SD0 device
selection is based on the XOR between GPIO_SD0_DEV_SEL and SW1[2]
switch position.

This patch sets GPIO_SD0_DEV_SEL to high in DT. Use the below switch
setting logic for device selection between eMMC and microSD slot
connected to SDHI0.

Set SW1[2] to position OFF for selecting eMMC
Set SW1[2] to position ON for selecting microSD

This patch enables eMMC on RZ/G2LC SMARC platform by default.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220117075130.6198-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 .../boot/dts/renesas/rzg2lc-smarc-som.dtsi    | 142 ++++++++++++++++++
 1 file changed, 142 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
index e1d7a3a689c6..6ebda3724f2c 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
@@ -8,6 +8,16 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
 
+/* SW1[2] should be at OFF position to enable 64 GB eMMC */
+#define EMMC	1
+
+/*
+ * To enable uSD card on CN3,
+ * SW1[2] should be at ON position.
+ * Disable eMMC by setting "#define EMMC	0" above.
+ */
+#define SDHI	(!EMMC)
+
 / {
 	aliases {
 		ethernet0 = &eth0;
@@ -22,6 +32,36 @@ memory@48000000 {
 		/* first 128MB is reserved for secure area. */
 		reg = <0x0 0x48000000 0x0 0x38000000>;
 	};
+
+	reg_1p8v: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <3300000 1>, <1800000 0>;
+		regulator-boot-on;
+		gpios = <&pinctrl RZG2L_GPIO(39, 0) GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
 };
 
 &eth0 {
@@ -72,5 +112,107 @@ eth0_pins: eth0 {
 			 <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */
 			 <RZG2L_PORT_PINMUX(26, 1, 1)>; /* ET0_RXD3 */
 	};
+
+	gpio-sd0-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(18, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "gpio_sd0_pwr_en";
+	};
+
+	/*
+	 * SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2]
+	 * The below switch logic can be used to select the device between
+	 * eMMC and microSD, after setting GPIO_SD0_DEV_SEL to high in DT.
+	 * SW1[2] should be at OFF position to enable 64 GB eMMC
+	 * SW1[2] should be at position ON to enable uSD card CN3
+	 */
+	gpio-sd0-dev-sel-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(40, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "gpio_sd0_dev_sel";
+	};
+
+	sdhi0_emmc_pins: sd0emmc {
+		sd0_emmc_data {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3",
+			       "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7";
+			power-source = <1800>;
+		};
+
+		sd0_emmc_ctrl {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <1800>;
+		};
+
+		sd0_emmc_rst {
+			pins = "SD0_RST#";
+			power-source = <1800>;
+		};
+	};
+
+	sdhi0_pins: sd0 {
+		sd0_data {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+			power-source = <3300>;
+		};
+
+		sd0_ctrl {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <3300>;
+		};
+
+		sd0_mux {
+			pinmux = <RZG2L_PORT_PINMUX(18, 0, 1)>; /* SD0_CD */
+		};
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		sd0_data_uhs {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+			power-source = <1800>;
+		};
+
+		sd0_ctrl_uhs {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <1800>;
+		};
+
+		sd0_mux_uhs {
+			pinmux = <RZG2L_PORT_PINMUX(18, 0, 1)>; /* SD0_CD */
+		};
+	};
+};
+
+#if SDHI
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+#endif
+
+#if EMMC
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_emmc_pins>;
+	pinctrl-1 = <&sdhi0_emmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
 };
+#endif
 
-- 
2.25.1

[PATCH 5.10.y-cip 04/24] arm64: dts: renesas: rzg2lc-smarc: Enable microSD on SMARC platform

[Biju Das]

commit 81a27b1f69022174567e8237d3de2534821671ba upstream.

Enable the microSD card slot connected to SDHI1 on the RZ/G2LC SMARC
platform by removing the sdhi1 override which disabled it, and by adding
the necessary pinmux required for SDHI1.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220117075130.6198-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 .../boot/dts/renesas/r9a07g044c2-smarc.dts    |  8 ----
 .../dts/renesas/rzg2lc-smarc-pinfunction.dtsi | 39 +++++++++++++++++++
 2 files changed, 39 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
index 728a2275ea8d..8d671111d973 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
@@ -81,14 +81,6 @@ &scif2 {
 	status = "disabled";
 };
 
-&sdhi1 {
-	/delete-property/ pinctrl-0;
-	/delete-property/ pinctrl-1;
-	/delete-property/ pinctrl-names;
-	/delete-property/ vmmc-supply;
-	status = "disabled";
-};
-
 &spi1 {
 	/delete-property/ pinctrl-0;
 	/delete-property/ pinctrl-names;
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
index 5333a1f9a0e7..1032f6563515 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
@@ -17,6 +17,45 @@ scif0_pins: scif0 {
 			 <RZG2L_PORT_PINMUX(38, 1, 1)>;	/* RxD */
 	};
 
+	sd1-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sd1_pwr_en";
+	};
+
+	sdhi1_pins: sd1 {
+		sd1_data {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <3300>;
+		};
+
+		sd1_ctrl {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <3300>;
+		};
+
+		sd1_mux {
+			pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
+		};
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		sd1_data_uhs {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <1800>;
+		};
+
+		sd1_ctrl_uhs {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <1800>;
+		};
+
+		sd1_mux_uhs {
+			pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
+		};
+	};
+
 	sound_clk_pins: sound_clk {
 		pins = "AUDIO_CLK1", "AUDIO_CLK2";
 		input-enable;
-- 
2.25.1

[PATCH 5.10.y-cip 05/24] clk: renesas: r9a07g044: Add mux and divider for G clock

[Biju Das]

commit 7ef9c45a23a9071dee23ca1a769c53ec2cdc07c0 upstream.

G clock is sourced from PLL3 and PLL6. The output of the mux is
connected to divider.

This patch adds a mux and divider for getting different rates from
this clock sources.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211203115154.31864-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 drivers/clk/renesas/r9a07g044-cpg.c | 6 ++++++
 drivers/clk/renesas/rzg2l-cpg.h     | 4 ++++
 2 files changed, 10 insertions(+)

diff --git a/drivers/clk/renesas/r9a07g044-cpg.c b/drivers/clk/renesas/r9a07g044-cpg.c
index 0962f25cd3f0..85132b6c97b7 100644
--- a/drivers/clk/renesas/r9a07g044-cpg.c
+++ b/drivers/clk/renesas/r9a07g044-cpg.c
@@ -50,6 +50,7 @@ enum clk_ids {
 	CLK_PLL2_SDHI_266,
 	CLK_SD0_DIV4,
 	CLK_SD1_DIV4,
+	CLK_SEL_GPU2,
 
 	/* Module Clocks */
 	MOD_CLK_BASE,
@@ -77,6 +78,7 @@ static const struct clk_div_table dtable_1_32[] = {
 static const char * const sel_pll3_3[] = { ".pll3_533", ".pll3_400" };
 static const char * const sel_pll6_2[]	= { ".pll6_250", ".pll5_250" };
 static const char * const sel_shdi[] = { ".clk_533", ".clk_400", ".clk_266" };
+static const char * const sel_gpu2[] = { ".pll6", ".pll3_div2_2" };
 
 static const struct cpg_core_clk r9a07g044_core_clks[] __initconst = {
 	/* External Clock Inputs */
@@ -116,6 +118,8 @@ static const struct cpg_core_clk r9a07g044_core_clks[] __initconst = {
 
 	DEF_FIXED(".pll5_250", CLK_PLL5_250, CLK_PLL5_FOUT3, 1, 2),
 	DEF_FIXED(".pll6_250", CLK_PLL6_250, CLK_PLL6, 1, 2),
+	DEF_MUX(".sel_gpu2", CLK_SEL_GPU2, SEL_GPU2,
+		sel_gpu2, ARRAY_SIZE(sel_gpu2), 0, CLK_MUX_READ_ONLY),
 
 	/* Core output clk */
 	DEF_DIV("I", R9A07G044_CLK_I, CLK_PLL1, DIVPL1A, dtable_1_8,
@@ -141,6 +145,8 @@ static const struct cpg_core_clk r9a07g044_core_clks[] __initconst = {
 		   sel_shdi, ARRAY_SIZE(sel_shdi)),
 	DEF_FIXED("SD0_DIV4", CLK_SD0_DIV4, R9A07G044_CLK_SD0, 1, 4),
 	DEF_FIXED("SD1_DIV4", CLK_SD1_DIV4, R9A07G044_CLK_SD1, 1, 4),
+	DEF_DIV("G", R9A07G044_CLK_G, CLK_SEL_GPU2, DIVGPU, dtable_1_8,
+		CLK_DIVIDER_HIWORD_MASK),
 };
 
 static struct rzg2l_mod_clk r9a07g044_mod_clks[] = {
diff --git a/drivers/clk/renesas/rzg2l-cpg.h b/drivers/clk/renesas/rzg2l-cpg.h
index fce4a8f35410..5729d102034b 100644
--- a/drivers/clk/renesas/rzg2l-cpg.h
+++ b/drivers/clk/renesas/rzg2l-cpg.h
@@ -12,9 +12,11 @@
 #define CPG_PL1_DDIV		(0x200)
 #define CPG_PL2_DDIV		(0x204)
 #define CPG_PL3A_DDIV		(0x208)
+#define CPG_PL6_DDIV		(0x210)
 #define CPG_PL2SDHI_DSEL	(0x218)
 #define CPG_CLKSTATUS		(0x280)
 #define CPG_PL3_SSEL		(0x408)
+#define CPG_PL6_SSEL		(0x414)
 #define CPG_PL6_ETH_SSEL	(0x418)
 
 #define CPG_CLKSTATUS_SELSDHI0_STS	BIT(28)
@@ -35,12 +37,14 @@
 #define DIVPL3A		DDIV_PACK(CPG_PL3A_DDIV, 0, 3)
 #define DIVPL3B		DDIV_PACK(CPG_PL3A_DDIV, 4, 3)
 #define DIVPL3C		DDIV_PACK(CPG_PL3A_DDIV, 8, 3)
+#define DIVGPU		DDIV_PACK(CPG_PL6_DDIV, 0, 2)
 
 #define SEL_PLL_PACK(offset, bitpos, size) \
 		(((offset) << 20) | ((bitpos) << 12) | ((size) << 8))
 
 #define SEL_PLL3_3	SEL_PLL_PACK(CPG_PL3_SSEL, 8, 1)
 #define SEL_PLL6_2	SEL_PLL_PACK(CPG_PL6_ETH_SSEL, 0, 1)
+#define SEL_GPU2	SEL_PLL_PACK(CPG_PL6_SSEL, 12, 1)
 
 #define SEL_SDHI0	DDIV_PACK(CPG_PL2SDHI_DSEL, 0, 2)
 #define SEL_SDHI1	DDIV_PACK(CPG_PL2SDHI_DSEL, 4, 2)
-- 
2.25.1

[PATCH 5.10.y-cip 06/24] clk: renesas: r9a07g044: Add GPU clock and reset entries

[Biju Das]

commit f0b62b0bbedcdfde18116080605cebd9beec4ee9 upstream.

Add GPU clock and reset entries to CPG driver.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211203115154.31864-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 drivers/clk/renesas/r9a07g044-cpg.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/clk/renesas/r9a07g044-cpg.c b/drivers/clk/renesas/r9a07g044-cpg.c
index 85132b6c97b7..79042bf46fe8 100644
--- a/drivers/clk/renesas/r9a07g044-cpg.c
+++ b/drivers/clk/renesas/r9a07g044-cpg.c
@@ -198,6 +198,12 @@ static struct rzg2l_mod_clk r9a07g044_mod_clks[] = {
 				0x554, 6),
 	DEF_MOD("sdhi1_aclk",	R9A07G044_SDHI1_ACLK, R9A07G044_CLK_P1,
 				0x554, 7),
+	DEF_MOD("gpu_clk",	R9A07G044_GPU_CLK, R9A07G044_CLK_G,
+				0x558, 0),
+	DEF_MOD("gpu_axi_clk",	R9A07G044_GPU_AXI_CLK, R9A07G044_CLK_P1,
+				0x558, 1),
+	DEF_MOD("gpu_ace_clk",	R9A07G044_GPU_ACE_CLK, R9A07G044_CLK_P1,
+				0x558, 2),
 	DEF_MOD("ssi0_pclk",	R9A07G044_SSI0_PCLK2, R9A07G044_CLK_P0,
 				0x570, 0),
 	DEF_MOD("ssi0_sfr",	R9A07G044_SSI0_PCLK_SFR, R9A07G044_CLK_P0,
@@ -285,6 +291,9 @@ static struct rzg2l_reset r9a07g044_resets[] = {
 	DEF_RST(R9A07G044_SPI_RST, 0x850, 0),
 	DEF_RST(R9A07G044_SDHI0_IXRST, 0x854, 0),
 	DEF_RST(R9A07G044_SDHI1_IXRST, 0x854, 1),
+	DEF_RST(R9A07G044_GPU_RESETN, 0x858, 0),
+	DEF_RST(R9A07G044_GPU_AXI_RESETN, 0x858, 1),
+	DEF_RST(R9A07G044_GPU_ACE_RESETN, 0x858, 2),
 	DEF_RST(R9A07G044_SSI0_RST_M2_REG, 0x870, 0),
 	DEF_RST(R9A07G044_SSI1_RST_M2_REG, 0x870, 1),
 	DEF_RST(R9A07G044_SSI2_RST_M2_REG, 0x870, 2),
-- 
2.25.1

[PATCH 5.10.y-cip 07/24] clk: renesas: r9a07g044: Update multiplier and divider values for PLL2/3

[Biju Das]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit b289cdecc7c3e25e001cde260c882e4d9a8b0772 upstream.

As per the HW manual (Rev.1.00 Sep, 2021) PLL2 and PLL3 should be
1600 MHz, but with current multiplier and divider values this resulted
to 1596 MHz.

This patch updates the multiplier and divider values for PLL2 and PLL3
so that we get the exact (1600 MHz) values.

Fixes: 17f0ff3d49ff1 ("clk: renesas: Add support for R9A07G044 SoC")
Suggested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211223093223.4725-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 drivers/clk/renesas/r9a07g044-cpg.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/renesas/r9a07g044-cpg.c b/drivers/clk/renesas/r9a07g044-cpg.c
index 79042bf46fe8..46359afef0d4 100644
--- a/drivers/clk/renesas/r9a07g044-cpg.c
+++ b/drivers/clk/renesas/r9a07g044-cpg.c
@@ -88,8 +88,8 @@ static const struct cpg_core_clk r9a07g044_core_clks[] __initconst = {
 	DEF_FIXED(".osc", R9A07G044_OSCCLK, CLK_EXTAL, 1, 1),
 	DEF_FIXED(".osc_div1000", CLK_OSC_DIV1000, CLK_EXTAL, 1, 1000),
 	DEF_SAMPLL(".pll1", CLK_PLL1, CLK_EXTAL, PLL146_CONF(0)),
-	DEF_FIXED(".pll2", CLK_PLL2, CLK_EXTAL, 133, 2),
-	DEF_FIXED(".pll3", CLK_PLL3, CLK_EXTAL, 133, 2),
+	DEF_FIXED(".pll2", CLK_PLL2, CLK_EXTAL, 200, 3),
+	DEF_FIXED(".pll3", CLK_PLL3, CLK_EXTAL, 200, 3),
 	DEF_FIXED(".pll3_400", CLK_PLL3_400, CLK_PLL3, 1, 4),
 	DEF_FIXED(".pll3_533", CLK_PLL3_533, CLK_PLL3, 1, 3),
 
-- 
2.25.1

[PATCH 5.10.y-cip 08/24] dt-bindings: clock: Add R9A07G054 CPG Clock and Reset Definitions

[Biju Das]

commit 4decd2e54b61686787f36b727d2772e067a46ea5 upstream.

Define RZ/V2L (R9A07G054) Clock Pulse Generator Core Clock and module
clock outputs, as listed in Table 7.1.4.2 ("Clock List r1.0") and also
add Reset definitions referring to registers CPG_RST_* in Section 7.2.3
("Register configuration") of the RZ/V2L Hardware User's Manual (Rev.
1.00, Nov. 2021).

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220126211003.6675-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 include/dt-bindings/clock/r9a07g054-cpg.h | 229 ++++++++++++++++++++++
 1 file changed, 229 insertions(+)
 create mode 100644 include/dt-bindings/clock/r9a07g054-cpg.h

diff --git a/include/dt-bindings/clock/r9a07g054-cpg.h b/include/dt-bindings/clock/r9a07g054-cpg.h
new file mode 100644
index 000000000000..43f4dbda872c
--- /dev/null
+++ b/include/dt-bindings/clock/r9a07g054-cpg.h
@@ -0,0 +1,229 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+#ifndef __DT_BINDINGS_CLOCK_R9A07G054_CPG_H__
+#define __DT_BINDINGS_CLOCK_R9A07G054_CPG_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* R9A07G054 CPG Core Clocks */
+#define R9A07G054_CLK_I			0
+#define R9A07G054_CLK_I2		1
+#define R9A07G054_CLK_G			2
+#define R9A07G054_CLK_S0		3
+#define R9A07G054_CLK_S1		4
+#define R9A07G054_CLK_SPI0		5
+#define R9A07G054_CLK_SPI1		6
+#define R9A07G054_CLK_SD0		7
+#define R9A07G054_CLK_SD1		8
+#define R9A07G054_CLK_M0		9
+#define R9A07G054_CLK_M1		10
+#define R9A07G054_CLK_M2		11
+#define R9A07G054_CLK_M3		12
+#define R9A07G054_CLK_M4		13
+#define R9A07G054_CLK_HP		14
+#define R9A07G054_CLK_TSU		15
+#define R9A07G054_CLK_ZT		16
+#define R9A07G054_CLK_P0		17
+#define R9A07G054_CLK_P1		18
+#define R9A07G054_CLK_P2		19
+#define R9A07G054_CLK_AT		20
+#define R9A07G054_OSCCLK		21
+#define R9A07G054_CLK_P0_DIV2		22
+#define R9A07G054_CLK_DRP_M		23
+#define R9A07G054_CLK_DRP_D		24
+#define R9A07G054_CLK_DRP_A		25
+
+/* R9A07G054 Module Clocks */
+#define R9A07G054_CA55_SCLK		0
+#define R9A07G054_CA55_PCLK		1
+#define R9A07G054_CA55_ATCLK		2
+#define R9A07G054_CA55_GICCLK		3
+#define R9A07G054_CA55_PERICLK		4
+#define R9A07G054_CA55_ACLK		5
+#define R9A07G054_CA55_TSCLK		6
+#define R9A07G054_GIC600_GICCLK		7
+#define R9A07G054_IA55_CLK		8
+#define R9A07G054_IA55_PCLK		9
+#define R9A07G054_MHU_PCLK		10
+#define R9A07G054_SYC_CNT_CLK		11
+#define R9A07G054_DMAC_ACLK		12
+#define R9A07G054_DMAC_PCLK		13
+#define R9A07G054_OSTM0_PCLK		14
+#define R9A07G054_OSTM1_PCLK		15
+#define R9A07G054_OSTM2_PCLK		16
+#define R9A07G054_MTU_X_MCK_MTU3	17
+#define R9A07G054_POE3_CLKM_POE		18
+#define R9A07G054_GPT_PCLK		19
+#define R9A07G054_POEG_A_CLKP		20
+#define R9A07G054_POEG_B_CLKP		21
+#define R9A07G054_POEG_C_CLKP		22
+#define R9A07G054_POEG_D_CLKP		23
+#define R9A07G054_WDT0_PCLK		24
+#define R9A07G054_WDT0_CLK		25
+#define R9A07G054_WDT1_PCLK		26
+#define R9A07G054_WDT1_CLK		27
+#define R9A07G054_WDT2_PCLK		28
+#define R9A07G054_WDT2_CLK		29
+#define R9A07G054_SPI_CLK2		30
+#define R9A07G054_SPI_CLK		31
+#define R9A07G054_SDHI0_IMCLK		32
+#define R9A07G054_SDHI0_IMCLK2		33
+#define R9A07G054_SDHI0_CLK_HS		34
+#define R9A07G054_SDHI0_ACLK		35
+#define R9A07G054_SDHI1_IMCLK		36
+#define R9A07G054_SDHI1_IMCLK2		37
+#define R9A07G054_SDHI1_CLK_HS		38
+#define R9A07G054_SDHI1_ACLK		39
+#define R9A07G054_GPU_CLK		40
+#define R9A07G054_GPU_AXI_CLK		41
+#define R9A07G054_GPU_ACE_CLK		42
+#define R9A07G054_ISU_ACLK		43
+#define R9A07G054_ISU_PCLK		44
+#define R9A07G054_H264_CLK_A		45
+#define R9A07G054_H264_CLK_P		46
+#define R9A07G054_CRU_SYSCLK		47
+#define R9A07G054_CRU_VCLK		48
+#define R9A07G054_CRU_PCLK		49
+#define R9A07G054_CRU_ACLK		50
+#define R9A07G054_MIPI_DSI_PLLCLK	51
+#define R9A07G054_MIPI_DSI_SYSCLK	52
+#define R9A07G054_MIPI_DSI_ACLK		53
+#define R9A07G054_MIPI_DSI_PCLK		54
+#define R9A07G054_MIPI_DSI_VCLK		55
+#define R9A07G054_MIPI_DSI_LPCLK	56
+#define R9A07G054_LCDC_CLK_A		57
+#define R9A07G054_LCDC_CLK_P		58
+#define R9A07G054_LCDC_CLK_D		59
+#define R9A07G054_SSI0_PCLK2		60
+#define R9A07G054_SSI0_PCLK_SFR		61
+#define R9A07G054_SSI1_PCLK2		62
+#define R9A07G054_SSI1_PCLK_SFR		63
+#define R9A07G054_SSI2_PCLK2		64
+#define R9A07G054_SSI2_PCLK_SFR		65
+#define R9A07G054_SSI3_PCLK2		66
+#define R9A07G054_SSI3_PCLK_SFR		67
+#define R9A07G054_SRC_CLKP		68
+#define R9A07G054_USB_U2H0_HCLK		69
+#define R9A07G054_USB_U2H1_HCLK		70
+#define R9A07G054_USB_U2P_EXR_CPUCLK	71
+#define R9A07G054_USB_PCLK		72
+#define R9A07G054_ETH0_CLK_AXI		73
+#define R9A07G054_ETH0_CLK_CHI		74
+#define R9A07G054_ETH1_CLK_AXI		75
+#define R9A07G054_ETH1_CLK_CHI		76
+#define R9A07G054_I2C0_PCLK		77
+#define R9A07G054_I2C1_PCLK		78
+#define R9A07G054_I2C2_PCLK		79
+#define R9A07G054_I2C3_PCLK		80
+#define R9A07G054_SCIF0_CLK_PCK		81
+#define R9A07G054_SCIF1_CLK_PCK		82
+#define R9A07G054_SCIF2_CLK_PCK		83
+#define R9A07G054_SCIF3_CLK_PCK		84
+#define R9A07G054_SCIF4_CLK_PCK		85
+#define R9A07G054_SCI0_CLKP		86
+#define R9A07G054_SCI1_CLKP		87
+#define R9A07G054_IRDA_CLKP		88
+#define R9A07G054_RSPI0_CLKB		89
+#define R9A07G054_RSPI1_CLKB		90
+#define R9A07G054_RSPI2_CLKB		91
+#define R9A07G054_CANFD_PCLK		92
+#define R9A07G054_GPIO_HCLK		93
+#define R9A07G054_ADC_ADCLK		94
+#define R9A07G054_ADC_PCLK		95
+#define R9A07G054_TSU_PCLK		96
+#define R9A07G054_STPAI_INITCLK		97
+#define R9A07G054_STPAI_ACLK		98
+#define R9A07G054_STPAI_MCLK		99
+#define R9A07G054_STPAI_DCLKIN		100
+#define R9A07G054_STPAI_ACLK_DRP	101
+
+/* R9A07G054 Resets */
+#define R9A07G054_CA55_RST_1_0		0
+#define R9A07G054_CA55_RST_1_1		1
+#define R9A07G054_CA55_RST_3_0		2
+#define R9A07G054_CA55_RST_3_1		3
+#define R9A07G054_CA55_RST_4		4
+#define R9A07G054_CA55_RST_5		5
+#define R9A07G054_CA55_RST_6		6
+#define R9A07G054_CA55_RST_7		7
+#define R9A07G054_CA55_RST_8		8
+#define R9A07G054_CA55_RST_9		9
+#define R9A07G054_CA55_RST_10		10
+#define R9A07G054_CA55_RST_11		11
+#define R9A07G054_CA55_RST_12		12
+#define R9A07G054_GIC600_GICRESET_N	13
+#define R9A07G054_GIC600_DBG_GICRESET_N	14
+#define R9A07G054_IA55_RESETN		15
+#define R9A07G054_MHU_RESETN		16
+#define R9A07G054_DMAC_ARESETN		17
+#define R9A07G054_DMAC_RST_ASYNC	18
+#define R9A07G054_SYC_RESETN		19
+#define R9A07G054_OSTM0_PRESETZ		20
+#define R9A07G054_OSTM1_PRESETZ		21
+#define R9A07G054_OSTM2_PRESETZ		22
+#define R9A07G054_MTU_X_PRESET_MTU3	23
+#define R9A07G054_POE3_RST_M_REG	24
+#define R9A07G054_GPT_RST_C		25
+#define R9A07G054_POEG_A_RST		26
+#define R9A07G054_POEG_B_RST		27
+#define R9A07G054_POEG_C_RST		28
+#define R9A07G054_POEG_D_RST		29
+#define R9A07G054_WDT0_PRESETN		30
+#define R9A07G054_WDT1_PRESETN		31
+#define R9A07G054_WDT2_PRESETN		32
+#define R9A07G054_SPI_RST		33
+#define R9A07G054_SDHI0_IXRST		34
+#define R9A07G054_SDHI1_IXRST		35
+#define R9A07G054_GPU_RESETN		36
+#define R9A07G054_GPU_AXI_RESETN	37
+#define R9A07G054_GPU_ACE_RESETN	38
+#define R9A07G054_ISU_ARESETN		39
+#define R9A07G054_ISU_PRESETN		40
+#define R9A07G054_H264_X_RESET_VCP	41
+#define R9A07G054_H264_CP_PRESET_P	42
+#define R9A07G054_CRU_CMN_RSTB		43
+#define R9A07G054_CRU_PRESETN		44
+#define R9A07G054_CRU_ARESETN		45
+#define R9A07G054_MIPI_DSI_CMN_RSTB	46
+#define R9A07G054_MIPI_DSI_ARESET_N	47
+#define R9A07G054_MIPI_DSI_PRESET_N	48
+#define R9A07G054_LCDC_RESET_N		49
+#define R9A07G054_SSI0_RST_M2_REG	50
+#define R9A07G054_SSI1_RST_M2_REG	51
+#define R9A07G054_SSI2_RST_M2_REG	52
+#define R9A07G054_SSI3_RST_M2_REG	53
+#define R9A07G054_SRC_RST		54
+#define R9A07G054_USB_U2H0_HRESETN	55
+#define R9A07G054_USB_U2H1_HRESETN	56
+#define R9A07G054_USB_U2P_EXL_SYSRST	57
+#define R9A07G054_USB_PRESETN		58
+#define R9A07G054_ETH0_RST_HW_N		59
+#define R9A07G054_ETH1_RST_HW_N		60
+#define R9A07G054_I2C0_MRST		61
+#define R9A07G054_I2C1_MRST		62
+#define R9A07G054_I2C2_MRST		63
+#define R9A07G054_I2C3_MRST		64
+#define R9A07G054_SCIF0_RST_SYSTEM_N	65
+#define R9A07G054_SCIF1_RST_SYSTEM_N	66
+#define R9A07G054_SCIF2_RST_SYSTEM_N	67
+#define R9A07G054_SCIF3_RST_SYSTEM_N	68
+#define R9A07G054_SCIF4_RST_SYSTEM_N	69
+#define R9A07G054_SCI0_RST		70
+#define R9A07G054_SCI1_RST		71
+#define R9A07G054_IRDA_RST		72
+#define R9A07G054_RSPI0_RST		73
+#define R9A07G054_RSPI1_RST		74
+#define R9A07G054_RSPI2_RST		75
+#define R9A07G054_CANFD_RSTP_N		76
+#define R9A07G054_CANFD_RSTC_N		77
+#define R9A07G054_GPIO_RSTN		78
+#define R9A07G054_GPIO_PORT_RESETN	79
+#define R9A07G054_GPIO_SPARE_RESETN	80
+#define R9A07G054_ADC_PRESETN		81
+#define R9A07G054_ADC_ADRST_N		82
+#define R9A07G054_TSU_PRESETN		83
+#define R9A07G054_STPAI_ARESETN		84
+
+#endif /* __DT_BINDINGS_CLOCK_R9A07G054_CPG_H__ */
-- 
2.25.1

[PATCH 5.10.y-cip 09/24] dt-bindings: clock: renesas: Document RZ/V2L SoC

[Biju Das]

commit 678eb67513a963e5ce00a4ed6a07a5722bd1267e upstream.

Document the device tree binding for the Renesas RZ/V2L SoC.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220110134659.30424-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 .../bindings/clock/renesas,rzg2l-cpg.yaml          | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
index 30b2e3d0d25d..bd3af8fc616b 100644
--- a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
@@ -4,13 +4,13 @@
 $id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Renesas RZ/G2L Clock Pulse Generator / Module Standby Mode
+title: Renesas RZ/{G2L,V2L} Clock Pulse Generator / Module Standby Mode
 
 maintainers:
   - Geert Uytterhoeven <geert+renesas@glider.be>
 
 description: |
-  On Renesas RZ/G2L SoC, the CPG (Clock Pulse Generator) and Module
+  On Renesas RZ/{G2L,V2L} SoC, the CPG (Clock Pulse Generator) and Module
   Standby Mode share the same register block.
 
   They provide the following functionalities:
@@ -22,7 +22,9 @@ description: |
 
 properties:
   compatible:
-    const: renesas,r9a07g044-cpg  # RZ/G2{L,LC}
+    enum:
+      - renesas,r9a07g044-cpg  # RZ/G2{L,LC}
+      - renesas,r9a07g054-cpg  # RZ/V2L
 
   reg:
     maxItems: 1
@@ -40,9 +42,9 @@ properties:
     description: |
       - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
         and a core clock reference, as defined in
-        <dt-bindings/clock/r9a07g044-cpg.h>
+        <dt-bindings/clock/r9a07g*-cpg.h>
       - For module clocks, the two clock specifier cells must be "CPG_MOD" and
-        a module number, as defined in the <dt-bindings/clock/r9a07g044-cpg.h>.
+        a module number, as defined in the <dt-bindings/clock/r9a07g0*-cpg.h>.
     const: 2
 
   '#power-domain-cells':
@@ -56,7 +58,7 @@ properties:
   '#reset-cells':
     description:
       The single reset specifier cell must be the module number, as defined in
-      the <dt-bindings/clock/r9a07g044-cpg.h>.
+      the <dt-bindings/clock/r9a07g0*-cpg.h>.
     const: 1
 
 required:
-- 
2.25.1

[PATCH 5.10.y-cip 10/24] clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoC

[Biju Das]

commit a1bcf50a99dd1e40f0c6a963bd4f12547a89d4cd upstream.

The clock structure for RZ/V2L is almost identical to the RZ/G2L SoC.
The only difference being that RZ/V2L has additional registers to
control clocks and resets for the DRP-AI block.

Reuse r9a07g044-cpg.c, as the clock IDs and reset IDs are the same
between RZ/G2L and RZ/V2L, and add a separate r9a07g054_cpg_info to take
care of the DRP-AI clocks/resets.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220205084006.7142-1-biju.das.jz@bp.renesas.com
Link: https://lore.kernel.org/r/20220209203411.22332-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 drivers/clk/renesas/Kconfig         |   7 +-
 drivers/clk/renesas/Makefile        |   1 +
 drivers/clk/renesas/r9a07g044-cpg.c | 426 +++++++++++++++-------------
 drivers/clk/renesas/rzg2l-cpg.c     |   6 +
 drivers/clk/renesas/rzg2l-cpg.h     |   1 +
 5 files changed, 250 insertions(+), 191 deletions(-)

diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index 4d8de55bc6f4..162ea716b9a5 100644
--- a/drivers/clk/renesas/Kconfig
+++ b/drivers/clk/renesas/Kconfig
@@ -33,6 +33,7 @@ config CLK_RENESAS
 	select CLK_R8A779A0 if ARCH_R8A779A0
 	select CLK_R9A06G032 if ARCH_R9A06G032
 	select CLK_R9A07G044 if ARCH_R9A07G044
+	select CLK_R9A07G054 if ARCH_R9A07G054
 	select CLK_SH73A0 if ARCH_SH73A0
 
 if CLK_RENESAS
@@ -160,6 +161,10 @@ config CLK_R9A07G044
 	bool "RZ/G2L clock support" if COMPILE_TEST
 	select CLK_RZG2L
 
+config CLK_R9A07G054
+	bool "RZ/V2L clock support" if COMPILE_TEST
+	select CLK_RZG2L
+
 config CLK_SH73A0
 	bool "SH-Mobile AG5 clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSTP
@@ -183,7 +188,7 @@ config CLK_RCAR_USB2_CLOCK_SEL
 	  This is a driver for R-Car USB2 clock selector
 
 config CLK_RZG2L
-	bool "Renesas RZ/G2L family clock support" if COMPILE_TEST
+	bool "Renesas RZ/{G2L,V2L} family clock support" if COMPILE_TEST
 	select RESET_CONTROLLER
 
 # Generic
diff --git a/drivers/clk/renesas/Makefile b/drivers/clk/renesas/Makefile
index cd104e75dab6..7cb90ed1e1db 100644
--- a/drivers/clk/renesas/Makefile
+++ b/drivers/clk/renesas/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_CLK_R8A77995)		+= r8a77995-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A779A0)		+= r8a779a0-cpg-mssr.o
 obj-$(CONFIG_CLK_R9A06G032)		+= r9a06g032-clocks.o
 obj-$(CONFIG_CLK_R9A07G044)		+= r9a07g044-cpg.o
+obj-$(CONFIG_CLK_R9A07G054)		+= r9a07g044-cpg.o
 obj-$(CONFIG_CLK_SH73A0)		+= clk-sh73a0.o
 
 # Family
diff --git a/drivers/clk/renesas/r9a07g044-cpg.c b/drivers/clk/renesas/r9a07g044-cpg.c
index 46359afef0d4..bdfabb992a20 100644
--- a/drivers/clk/renesas/r9a07g044-cpg.c
+++ b/drivers/clk/renesas/r9a07g044-cpg.c
@@ -11,12 +11,13 @@
 #include <linux/kernel.h>
 
 #include <dt-bindings/clock/r9a07g044-cpg.h>
+#include <dt-bindings/clock/r9a07g054-cpg.h>
 
 #include "rzg2l-cpg.h"
 
 enum clk_ids {
 	/* Core Clock Outputs exported to DT */
-	LAST_DT_CORE_CLK = R9A07G044_CLK_P0_DIV2,
+	LAST_DT_CORE_CLK = R9A07G054_CLK_DRP_A,
 
 	/* External Input Clocks */
 	CLK_EXTAL,
@@ -80,200 +81,222 @@ static const char * const sel_pll6_2[]	= { ".pll6_250", ".pll5_250" };
 static const char * const sel_shdi[] = { ".clk_533", ".clk_400", ".clk_266" };
 static const char * const sel_gpu2[] = { ".pll6", ".pll3_div2_2" };
 
-static const struct cpg_core_clk r9a07g044_core_clks[] __initconst = {
-	/* External Clock Inputs */
-	DEF_INPUT("extal", CLK_EXTAL),
+static const struct {
+	struct cpg_core_clk common[44];
+#ifdef CONFIG_CLK_R9A07G054
+	struct cpg_core_clk drp[0];
+#endif
+} core_clks __initconst = {
+	.common = {
+		/* External Clock Inputs */
+		DEF_INPUT("extal", CLK_EXTAL),
 
-	/* Internal Core Clocks */
-	DEF_FIXED(".osc", R9A07G044_OSCCLK, CLK_EXTAL, 1, 1),
-	DEF_FIXED(".osc_div1000", CLK_OSC_DIV1000, CLK_EXTAL, 1, 1000),
-	DEF_SAMPLL(".pll1", CLK_PLL1, CLK_EXTAL, PLL146_CONF(0)),
-	DEF_FIXED(".pll2", CLK_PLL2, CLK_EXTAL, 200, 3),
-	DEF_FIXED(".pll3", CLK_PLL3, CLK_EXTAL, 200, 3),
-	DEF_FIXED(".pll3_400", CLK_PLL3_400, CLK_PLL3, 1, 4),
-	DEF_FIXED(".pll3_533", CLK_PLL3_533, CLK_PLL3, 1, 3),
+		/* Internal Core Clocks */
+		DEF_FIXED(".osc", R9A07G044_OSCCLK, CLK_EXTAL, 1, 1),
+		DEF_FIXED(".osc_div1000", CLK_OSC_DIV1000, CLK_EXTAL, 1, 1000),
+		DEF_SAMPLL(".pll1", CLK_PLL1, CLK_EXTAL, PLL146_CONF(0)),
+		DEF_FIXED(".pll2", CLK_PLL2, CLK_EXTAL, 200, 3),
+		DEF_FIXED(".pll3", CLK_PLL3, CLK_EXTAL, 200, 3),
+		DEF_FIXED(".pll3_400", CLK_PLL3_400, CLK_PLL3, 1, 4),
+		DEF_FIXED(".pll3_533", CLK_PLL3_533, CLK_PLL3, 1, 3),
 
-	DEF_FIXED(".pll5", CLK_PLL5, CLK_EXTAL, 125, 1),
-	DEF_FIXED(".pll5_fout3", CLK_PLL5_FOUT3, CLK_PLL5, 1, 6),
+		DEF_FIXED(".pll5", CLK_PLL5, CLK_EXTAL, 125, 1),
+		DEF_FIXED(".pll5_fout3", CLK_PLL5_FOUT3, CLK_PLL5, 1, 6),
 
-	DEF_FIXED(".pll6", CLK_PLL6, CLK_EXTAL, 125, 6),
+		DEF_FIXED(".pll6", CLK_PLL6, CLK_EXTAL, 125, 6),
 
-	DEF_FIXED(".pll2_div2", CLK_PLL2_DIV2, CLK_PLL2, 1, 2),
-	DEF_FIXED(".clk_800", CLK_PLL2_800, CLK_PLL2, 1, 2),
-	DEF_FIXED(".clk_533", CLK_PLL2_SDHI_533, CLK_PLL2, 1, 3),
-	DEF_FIXED(".clk_400", CLK_PLL2_SDHI_400, CLK_PLL2_800, 1, 2),
-	DEF_FIXED(".clk_266", CLK_PLL2_SDHI_266, CLK_PLL2_SDHI_533, 1, 2),
+		DEF_FIXED(".pll2_div2", CLK_PLL2_DIV2, CLK_PLL2, 1, 2),
+		DEF_FIXED(".clk_800", CLK_PLL2_800, CLK_PLL2, 1, 2),
+		DEF_FIXED(".clk_533", CLK_PLL2_SDHI_533, CLK_PLL2, 1, 3),
+		DEF_FIXED(".clk_400", CLK_PLL2_SDHI_400, CLK_PLL2_800, 1, 2),
+		DEF_FIXED(".clk_266", CLK_PLL2_SDHI_266, CLK_PLL2_SDHI_533, 1, 2),
 
-	DEF_FIXED(".pll2_div2_8", CLK_PLL2_DIV2_8, CLK_PLL2_DIV2, 1, 8),
-	DEF_FIXED(".pll2_div2_10", CLK_PLL2_DIV2_10, CLK_PLL2_DIV2, 1, 10),
+		DEF_FIXED(".pll2_div2_8", CLK_PLL2_DIV2_8, CLK_PLL2_DIV2, 1, 8),
+		DEF_FIXED(".pll2_div2_10", CLK_PLL2_DIV2_10, CLK_PLL2_DIV2, 1, 10),
 
-	DEF_FIXED(".pll3_div2", CLK_PLL3_DIV2, CLK_PLL3, 1, 2),
-	DEF_FIXED(".pll3_div2_2", CLK_PLL3_DIV2_2, CLK_PLL3_DIV2, 1, 2),
-	DEF_FIXED(".pll3_div2_4", CLK_PLL3_DIV2_4, CLK_PLL3_DIV2, 1, 4),
-	DEF_FIXED(".pll3_div2_4_2", CLK_PLL3_DIV2_4_2, CLK_PLL3_DIV2_4, 1, 2),
-	DEF_MUX(".sel_pll3_3", CLK_SEL_PLL3_3, SEL_PLL3_3,
-		sel_pll3_3, ARRAY_SIZE(sel_pll3_3), 0, CLK_MUX_READ_ONLY),
-	DEF_DIV("divpl3c", CLK_DIV_PLL3_C, CLK_SEL_PLL3_3,
-		DIVPL3C, dtable_1_32, CLK_DIVIDER_HIWORD_MASK),
+		DEF_FIXED(".pll3_div2", CLK_PLL3_DIV2, CLK_PLL3, 1, 2),
+		DEF_FIXED(".pll3_div2_2", CLK_PLL3_DIV2_2, CLK_PLL3_DIV2, 1, 2),
+		DEF_FIXED(".pll3_div2_4", CLK_PLL3_DIV2_4, CLK_PLL3_DIV2, 1, 4),
+		DEF_FIXED(".pll3_div2_4_2", CLK_PLL3_DIV2_4_2, CLK_PLL3_DIV2_4, 1, 2),
+		DEF_MUX(".sel_pll3_3", CLK_SEL_PLL3_3, SEL_PLL3_3,
+			sel_pll3_3, ARRAY_SIZE(sel_pll3_3), 0, CLK_MUX_READ_ONLY),
+		DEF_DIV("divpl3c", CLK_DIV_PLL3_C, CLK_SEL_PLL3_3,
+			DIVPL3C, dtable_1_32, CLK_DIVIDER_HIWORD_MASK),
 
-	DEF_FIXED(".pll5_250", CLK_PLL5_250, CLK_PLL5_FOUT3, 1, 2),
-	DEF_FIXED(".pll6_250", CLK_PLL6_250, CLK_PLL6, 1, 2),
-	DEF_MUX(".sel_gpu2", CLK_SEL_GPU2, SEL_GPU2,
-		sel_gpu2, ARRAY_SIZE(sel_gpu2), 0, CLK_MUX_READ_ONLY),
+		DEF_FIXED(".pll5_250", CLK_PLL5_250, CLK_PLL5_FOUT3, 1, 2),
+		DEF_FIXED(".pll6_250", CLK_PLL6_250, CLK_PLL6, 1, 2),
+		DEF_MUX(".sel_gpu2", CLK_SEL_GPU2, SEL_GPU2,
+			sel_gpu2, ARRAY_SIZE(sel_gpu2), 0, CLK_MUX_READ_ONLY),
 
-	/* Core output clk */
-	DEF_DIV("I", R9A07G044_CLK_I, CLK_PLL1, DIVPL1A, dtable_1_8,
-		CLK_DIVIDER_HIWORD_MASK),
-	DEF_DIV("P0", R9A07G044_CLK_P0, CLK_PLL2_DIV2_8, DIVPL2A,
-		dtable_1_32, CLK_DIVIDER_HIWORD_MASK),
-	DEF_FIXED("P0_DIV2", R9A07G044_CLK_P0_DIV2, R9A07G044_CLK_P0, 1, 2),
-	DEF_FIXED("TSU", R9A07G044_CLK_TSU, CLK_PLL2_DIV2_10, 1, 1),
-	DEF_DIV("P1", R9A07G044_CLK_P1, CLK_PLL3_DIV2_4,
-		DIVPL3B, dtable_1_32, CLK_DIVIDER_HIWORD_MASK),
-	DEF_FIXED("P1_DIV2", CLK_P1_DIV2, R9A07G044_CLK_P1, 1, 2),
-	DEF_DIV("P2", R9A07G044_CLK_P2, CLK_PLL3_DIV2_4_2,
-		DIVPL3A, dtable_1_32, CLK_DIVIDER_HIWORD_MASK),
-	DEF_FIXED("M0", R9A07G044_CLK_M0, CLK_PLL3_DIV2_4, 1, 1),
-	DEF_FIXED("ZT", R9A07G044_CLK_ZT, CLK_PLL3_DIV2_4_2, 1, 1),
-	DEF_MUX("HP", R9A07G044_CLK_HP, SEL_PLL6_2,
-		sel_pll6_2, ARRAY_SIZE(sel_pll6_2), 0, CLK_MUX_HIWORD_MASK),
-	DEF_FIXED("SPI0", R9A07G044_CLK_SPI0, CLK_DIV_PLL3_C, 1, 2),
-	DEF_FIXED("SPI1", R9A07G044_CLK_SPI1, CLK_DIV_PLL3_C, 1, 4),
-	DEF_SD_MUX("SD0", R9A07G044_CLK_SD0, SEL_SDHI0,
-		   sel_shdi, ARRAY_SIZE(sel_shdi)),
-	DEF_SD_MUX("SD1", R9A07G044_CLK_SD1, SEL_SDHI1,
-		   sel_shdi, ARRAY_SIZE(sel_shdi)),
-	DEF_FIXED("SD0_DIV4", CLK_SD0_DIV4, R9A07G044_CLK_SD0, 1, 4),
-	DEF_FIXED("SD1_DIV4", CLK_SD1_DIV4, R9A07G044_CLK_SD1, 1, 4),
-	DEF_DIV("G", R9A07G044_CLK_G, CLK_SEL_GPU2, DIVGPU, dtable_1_8,
-		CLK_DIVIDER_HIWORD_MASK),
+		/* Core output clk */
+		DEF_DIV("I", R9A07G044_CLK_I, CLK_PLL1, DIVPL1A, dtable_1_8,
+			CLK_DIVIDER_HIWORD_MASK),
+		DEF_DIV("P0", R9A07G044_CLK_P0, CLK_PLL2_DIV2_8, DIVPL2A,
+			dtable_1_32, CLK_DIVIDER_HIWORD_MASK),
+		DEF_FIXED("P0_DIV2", R9A07G044_CLK_P0_DIV2, R9A07G044_CLK_P0, 1, 2),
+		DEF_FIXED("TSU", R9A07G044_CLK_TSU, CLK_PLL2_DIV2_10, 1, 1),
+		DEF_DIV("P1", R9A07G044_CLK_P1, CLK_PLL3_DIV2_4,
+			DIVPL3B, dtable_1_32, CLK_DIVIDER_HIWORD_MASK),
+		DEF_FIXED("P1_DIV2", CLK_P1_DIV2, R9A07G044_CLK_P1, 1, 2),
+		DEF_DIV("P2", R9A07G044_CLK_P2, CLK_PLL3_DIV2_4_2,
+			DIVPL3A, dtable_1_32, CLK_DIVIDER_HIWORD_MASK),
+		DEF_FIXED("M0", R9A07G044_CLK_M0, CLK_PLL3_DIV2_4, 1, 1),
+		DEF_FIXED("ZT", R9A07G044_CLK_ZT, CLK_PLL3_DIV2_4_2, 1, 1),
+		DEF_MUX("HP", R9A07G044_CLK_HP, SEL_PLL6_2,
+			sel_pll6_2, ARRAY_SIZE(sel_pll6_2), 0, CLK_MUX_HIWORD_MASK),
+		DEF_FIXED("SPI0", R9A07G044_CLK_SPI0, CLK_DIV_PLL3_C, 1, 2),
+		DEF_FIXED("SPI1", R9A07G044_CLK_SPI1, CLK_DIV_PLL3_C, 1, 4),
+		DEF_SD_MUX("SD0", R9A07G044_CLK_SD0, SEL_SDHI0,
+			   sel_shdi, ARRAY_SIZE(sel_shdi)),
+		DEF_SD_MUX("SD1", R9A07G044_CLK_SD1, SEL_SDHI1,
+			   sel_shdi, ARRAY_SIZE(sel_shdi)),
+		DEF_FIXED("SD0_DIV4", CLK_SD0_DIV4, R9A07G044_CLK_SD0, 1, 4),
+		DEF_FIXED("SD1_DIV4", CLK_SD1_DIV4, R9A07G044_CLK_SD1, 1, 4),
+		DEF_DIV("G", R9A07G044_CLK_G, CLK_SEL_GPU2, DIVGPU, dtable_1_8,
+			CLK_DIVIDER_HIWORD_MASK),
+	},
+#ifdef CONFIG_CLK_R9A07G054
+	.drp = {
+	},
+#endif
 };
 
-static struct rzg2l_mod_clk r9a07g044_mod_clks[] = {
-	DEF_MOD("gic",		R9A07G044_GIC600_GICCLK, R9A07G044_CLK_P1,
-				0x514, 0),
-	DEF_MOD("ia55_pclk",	R9A07G044_IA55_PCLK, R9A07G044_CLK_P2,
-				0x518, 0),
-	DEF_MOD("ia55_clk",	R9A07G044_IA55_CLK, R9A07G044_CLK_P1,
-				0x518, 1),
-	DEF_MOD("dmac_aclk",	R9A07G044_DMAC_ACLK, R9A07G044_CLK_P1,
-				0x52c, 0),
-	DEF_MOD("dmac_pclk",	R9A07G044_DMAC_PCLK, CLK_P1_DIV2,
-				0x52c, 1),
-	DEF_MOD("ostm0_pclk",	R9A07G044_OSTM0_PCLK, R9A07G044_CLK_P0,
-				0x534, 0),
-	DEF_MOD("ostm1_clk",	R9A07G044_OSTM1_PCLK, R9A07G044_CLK_P0,
-				0x534, 1),
-	DEF_MOD("ostm2_pclk",	R9A07G044_OSTM2_PCLK, R9A07G044_CLK_P0,
-				0x534, 2),
-	DEF_MOD("wdt0_pclk",	R9A07G044_WDT0_PCLK, R9A07G044_CLK_P0,
-				0x548, 0),
-	DEF_MOD("wdt0_clk",	R9A07G044_WDT0_CLK, R9A07G044_OSCCLK,
-				0x548, 1),
-	DEF_MOD("wdt1_pclk",	R9A07G044_WDT1_PCLK, R9A07G044_CLK_P0,
-				0x548, 2),
-	DEF_MOD("wdt1_clk",	R9A07G044_WDT1_CLK, R9A07G044_OSCCLK,
-				0x548, 3),
-	DEF_MOD("wdt2_pclk",	R9A07G044_WDT2_PCLK, R9A07G044_CLK_P0,
-				0x548, 4),
-	DEF_MOD("wdt2_clk",	R9A07G044_WDT2_CLK, R9A07G044_OSCCLK,
-				0x548, 5),
-	DEF_MOD("spi_clk2",	R9A07G044_SPI_CLK2, R9A07G044_CLK_SPI1,
-				0x550, 0),
-	DEF_MOD("spi_clk",	R9A07G044_SPI_CLK, R9A07G044_CLK_SPI0,
-				0x550, 1),
-	DEF_MOD("sdhi0_imclk",	R9A07G044_SDHI0_IMCLK, CLK_SD0_DIV4,
-				0x554, 0),
-	DEF_MOD("sdhi0_imclk2",	R9A07G044_SDHI0_IMCLK2, CLK_SD0_DIV4,
-				0x554, 1),
-	DEF_MOD("sdhi0_clk_hs",	R9A07G044_SDHI0_CLK_HS, R9A07G044_CLK_SD0,
-				0x554, 2),
-	DEF_MOD("sdhi0_aclk",	R9A07G044_SDHI0_ACLK, R9A07G044_CLK_P1,
-				0x554, 3),
-	DEF_MOD("sdhi1_imclk",	R9A07G044_SDHI1_IMCLK, CLK_SD1_DIV4,
-				0x554, 4),
-	DEF_MOD("sdhi1_imclk2",	R9A07G044_SDHI1_IMCLK2, CLK_SD1_DIV4,
-				0x554, 5),
-	DEF_MOD("sdhi1_clk_hs",	R9A07G044_SDHI1_CLK_HS, R9A07G044_CLK_SD1,
-				0x554, 6),
-	DEF_MOD("sdhi1_aclk",	R9A07G044_SDHI1_ACLK, R9A07G044_CLK_P1,
-				0x554, 7),
-	DEF_MOD("gpu_clk",	R9A07G044_GPU_CLK, R9A07G044_CLK_G,
-				0x558, 0),
-	DEF_MOD("gpu_axi_clk",	R9A07G044_GPU_AXI_CLK, R9A07G044_CLK_P1,
-				0x558, 1),
-	DEF_MOD("gpu_ace_clk",	R9A07G044_GPU_ACE_CLK, R9A07G044_CLK_P1,
-				0x558, 2),
-	DEF_MOD("ssi0_pclk",	R9A07G044_SSI0_PCLK2, R9A07G044_CLK_P0,
-				0x570, 0),
-	DEF_MOD("ssi0_sfr",	R9A07G044_SSI0_PCLK_SFR, R9A07G044_CLK_P0,
-				0x570, 1),
-	DEF_MOD("ssi1_pclk",	R9A07G044_SSI1_PCLK2, R9A07G044_CLK_P0,
-				0x570, 2),
-	DEF_MOD("ssi1_sfr",	R9A07G044_SSI1_PCLK_SFR, R9A07G044_CLK_P0,
-				0x570, 3),
-	DEF_MOD("ssi2_pclk",	R9A07G044_SSI2_PCLK2, R9A07G044_CLK_P0,
-				0x570, 4),
-	DEF_MOD("ssi2_sfr",	R9A07G044_SSI2_PCLK_SFR, R9A07G044_CLK_P0,
-				0x570, 5),
-	DEF_MOD("ssi3_pclk",	R9A07G044_SSI3_PCLK2, R9A07G044_CLK_P0,
-				0x570, 6),
-	DEF_MOD("ssi3_sfr",	R9A07G044_SSI3_PCLK_SFR, R9A07G044_CLK_P0,
-				0x570, 7),
-	DEF_MOD("usb0_host",	R9A07G044_USB_U2H0_HCLK, R9A07G044_CLK_P1,
-				0x578, 0),
-	DEF_MOD("usb1_host",	R9A07G044_USB_U2H1_HCLK, R9A07G044_CLK_P1,
-				0x578, 1),
-	DEF_MOD("usb0_func",	R9A07G044_USB_U2P_EXR_CPUCLK, R9A07G044_CLK_P1,
-				0x578, 2),
-	DEF_MOD("usb_pclk",	R9A07G044_USB_PCLK, R9A07G044_CLK_P1,
-				0x578, 3),
-	DEF_COUPLED("eth0_axi",	R9A07G044_ETH0_CLK_AXI, R9A07G044_CLK_M0,
-				0x57c, 0),
-	DEF_COUPLED("eth0_chi",	R9A07G044_ETH0_CLK_CHI, R9A07G044_CLK_ZT,
-				0x57c, 0),
-	DEF_COUPLED("eth1_axi",	R9A07G044_ETH1_CLK_AXI, R9A07G044_CLK_M0,
-				0x57c, 1),
-	DEF_COUPLED("eth1_chi",	R9A07G044_ETH1_CLK_CHI, R9A07G044_CLK_ZT,
-				0x57c, 1),
-	DEF_MOD("i2c0",		R9A07G044_I2C0_PCLK, R9A07G044_CLK_P0,
-				0x580, 0),
-	DEF_MOD("i2c1",		R9A07G044_I2C1_PCLK, R9A07G044_CLK_P0,
-				0x580, 1),
-	DEF_MOD("i2c2",		R9A07G044_I2C2_PCLK, R9A07G044_CLK_P0,
-				0x580, 2),
-	DEF_MOD("i2c3",		R9A07G044_I2C3_PCLK, R9A07G044_CLK_P0,
-				0x580, 3),
-	DEF_MOD("scif0",	R9A07G044_SCIF0_CLK_PCK, R9A07G044_CLK_P0,
-				0x584, 0),
-	DEF_MOD("scif1",	R9A07G044_SCIF1_CLK_PCK, R9A07G044_CLK_P0,
-				0x584, 1),
-	DEF_MOD("scif2",	R9A07G044_SCIF2_CLK_PCK, R9A07G044_CLK_P0,
-				0x584, 2),
-	DEF_MOD("scif3",	R9A07G044_SCIF3_CLK_PCK, R9A07G044_CLK_P0,
-				0x584, 3),
-	DEF_MOD("scif4",	R9A07G044_SCIF4_CLK_PCK, R9A07G044_CLK_P0,
-				0x584, 4),
-	DEF_MOD("sci0",		R9A07G044_SCI0_CLKP, R9A07G044_CLK_P0,
-				0x588, 0),
-	DEF_MOD("sci1",		R9A07G044_SCI1_CLKP, R9A07G044_CLK_P0,
-				0x588, 1),
-	DEF_MOD("rspi0",	R9A07G044_RSPI0_CLKB, R9A07G044_CLK_P0,
-				0x590, 0),
-	DEF_MOD("rspi1",	R9A07G044_RSPI1_CLKB, R9A07G044_CLK_P0,
-				0x590, 1),
-	DEF_MOD("rspi2",	R9A07G044_RSPI2_CLKB, R9A07G044_CLK_P0,
-				0x590, 2),
-	DEF_MOD("canfd",	R9A07G044_CANFD_PCLK, R9A07G044_CLK_P0,
-				0x594, 0),
-	DEF_MOD("gpio",		R9A07G044_GPIO_HCLK, R9A07G044_OSCCLK,
-				0x598, 0),
-	DEF_MOD("adc_adclk",	R9A07G044_ADC_ADCLK, R9A07G044_CLK_TSU,
-				0x5a8, 0),
-	DEF_MOD("adc_pclk",	R9A07G044_ADC_PCLK, R9A07G044_CLK_P0,
-				0x5a8, 1),
-	DEF_MOD("tsu_pclk",	R9A07G044_TSU_PCLK, R9A07G044_CLK_TSU,
-				0x5ac, 0),
+static const struct {
+	struct rzg2l_mod_clk common[62];
+#ifdef CONFIG_CLK_R9A07G054
+	struct rzg2l_mod_clk drp[0];
+#endif
+} mod_clks = {
+	.common = {
+		DEF_MOD("gic",		R9A07G044_GIC600_GICCLK, R9A07G044_CLK_P1,
+					0x514, 0),
+		DEF_MOD("ia55_pclk",	R9A07G044_IA55_PCLK, R9A07G044_CLK_P2,
+					0x518, 0),
+		DEF_MOD("ia55_clk",	R9A07G044_IA55_CLK, R9A07G044_CLK_P1,
+					0x518, 1),
+		DEF_MOD("dmac_aclk",	R9A07G044_DMAC_ACLK, R9A07G044_CLK_P1,
+					0x52c, 0),
+		DEF_MOD("dmac_pclk",	R9A07G044_DMAC_PCLK, CLK_P1_DIV2,
+					0x52c, 1),
+		DEF_MOD("ostm0_pclk",	R9A07G044_OSTM0_PCLK, R9A07G044_CLK_P0,
+					0x534, 0),
+		DEF_MOD("ostm1_clk",	R9A07G044_OSTM1_PCLK, R9A07G044_CLK_P0,
+					0x534, 1),
+		DEF_MOD("ostm2_pclk",	R9A07G044_OSTM2_PCLK, R9A07G044_CLK_P0,
+					0x534, 2),
+		DEF_MOD("wdt0_pclk",	R9A07G044_WDT0_PCLK, R9A07G044_CLK_P0,
+					0x548, 0),
+		DEF_MOD("wdt0_clk",	R9A07G044_WDT0_CLK, R9A07G044_OSCCLK,
+					0x548, 1),
+		DEF_MOD("wdt1_pclk",	R9A07G044_WDT1_PCLK, R9A07G044_CLK_P0,
+					0x548, 2),
+		DEF_MOD("wdt1_clk",	R9A07G044_WDT1_CLK, R9A07G044_OSCCLK,
+					0x548, 3),
+		DEF_MOD("wdt2_pclk",	R9A07G044_WDT2_PCLK, R9A07G044_CLK_P0,
+					0x548, 4),
+		DEF_MOD("wdt2_clk",	R9A07G044_WDT2_CLK, R9A07G044_OSCCLK,
+					0x548, 5),
+		DEF_MOD("spi_clk2",	R9A07G044_SPI_CLK2, R9A07G044_CLK_SPI1,
+					0x550, 0),
+		DEF_MOD("spi_clk",	R9A07G044_SPI_CLK, R9A07G044_CLK_SPI0,
+					0x550, 1),
+		DEF_MOD("sdhi0_imclk",	R9A07G044_SDHI0_IMCLK, CLK_SD0_DIV4,
+					0x554, 0),
+		DEF_MOD("sdhi0_imclk2",	R9A07G044_SDHI0_IMCLK2, CLK_SD0_DIV4,
+					0x554, 1),
+		DEF_MOD("sdhi0_clk_hs",	R9A07G044_SDHI0_CLK_HS, R9A07G044_CLK_SD0,
+					0x554, 2),
+		DEF_MOD("sdhi0_aclk",	R9A07G044_SDHI0_ACLK, R9A07G044_CLK_P1,
+					0x554, 3),
+		DEF_MOD("sdhi1_imclk",	R9A07G044_SDHI1_IMCLK, CLK_SD1_DIV4,
+					0x554, 4),
+		DEF_MOD("sdhi1_imclk2",	R9A07G044_SDHI1_IMCLK2, CLK_SD1_DIV4,
+					0x554, 5),
+		DEF_MOD("sdhi1_clk_hs",	R9A07G044_SDHI1_CLK_HS, R9A07G044_CLK_SD1,
+					0x554, 6),
+		DEF_MOD("sdhi1_aclk",	R9A07G044_SDHI1_ACLK, R9A07G044_CLK_P1,
+					0x554, 7),
+		DEF_MOD("gpu_clk",	R9A07G044_GPU_CLK, R9A07G044_CLK_G,
+					0x558, 0),
+		DEF_MOD("gpu_axi_clk",	R9A07G044_GPU_AXI_CLK, R9A07G044_CLK_P1,
+					0x558, 1),
+		DEF_MOD("gpu_ace_clk",	R9A07G044_GPU_ACE_CLK, R9A07G044_CLK_P1,
+					0x558, 2),
+		DEF_MOD("ssi0_pclk",	R9A07G044_SSI0_PCLK2, R9A07G044_CLK_P0,
+					0x570, 0),
+		DEF_MOD("ssi0_sfr",	R9A07G044_SSI0_PCLK_SFR, R9A07G044_CLK_P0,
+					0x570, 1),
+		DEF_MOD("ssi1_pclk",	R9A07G044_SSI1_PCLK2, R9A07G044_CLK_P0,
+					0x570, 2),
+		DEF_MOD("ssi1_sfr",	R9A07G044_SSI1_PCLK_SFR, R9A07G044_CLK_P0,
+					0x570, 3),
+		DEF_MOD("ssi2_pclk",	R9A07G044_SSI2_PCLK2, R9A07G044_CLK_P0,
+					0x570, 4),
+		DEF_MOD("ssi2_sfr",	R9A07G044_SSI2_PCLK_SFR, R9A07G044_CLK_P0,
+					0x570, 5),
+		DEF_MOD("ssi3_pclk",	R9A07G044_SSI3_PCLK2, R9A07G044_CLK_P0,
+					0x570, 6),
+		DEF_MOD("ssi3_sfr",	R9A07G044_SSI3_PCLK_SFR, R9A07G044_CLK_P0,
+					0x570, 7),
+		DEF_MOD("usb0_host",	R9A07G044_USB_U2H0_HCLK, R9A07G044_CLK_P1,
+					0x578, 0),
+		DEF_MOD("usb1_host",	R9A07G044_USB_U2H1_HCLK, R9A07G044_CLK_P1,
+					0x578, 1),
+		DEF_MOD("usb0_func",	R9A07G044_USB_U2P_EXR_CPUCLK, R9A07G044_CLK_P1,
+					0x578, 2),
+		DEF_MOD("usb_pclk",	R9A07G044_USB_PCLK, R9A07G044_CLK_P1,
+					0x578, 3),
+		DEF_COUPLED("eth0_axi",	R9A07G044_ETH0_CLK_AXI, R9A07G044_CLK_M0,
+					0x57c, 0),
+		DEF_COUPLED("eth0_chi",	R9A07G044_ETH0_CLK_CHI, R9A07G044_CLK_ZT,
+					0x57c, 0),
+		DEF_COUPLED("eth1_axi",	R9A07G044_ETH1_CLK_AXI, R9A07G044_CLK_M0,
+					0x57c, 1),
+		DEF_COUPLED("eth1_chi",	R9A07G044_ETH1_CLK_CHI, R9A07G044_CLK_ZT,
+					0x57c, 1),
+		DEF_MOD("i2c0",		R9A07G044_I2C0_PCLK, R9A07G044_CLK_P0,
+					0x580, 0),
+		DEF_MOD("i2c1",		R9A07G044_I2C1_PCLK, R9A07G044_CLK_P0,
+					0x580, 1),
+		DEF_MOD("i2c2",		R9A07G044_I2C2_PCLK, R9A07G044_CLK_P0,
+					0x580, 2),
+		DEF_MOD("i2c3",		R9A07G044_I2C3_PCLK, R9A07G044_CLK_P0,
+					0x580, 3),
+		DEF_MOD("scif0",	R9A07G044_SCIF0_CLK_PCK, R9A07G044_CLK_P0,
+					0x584, 0),
+		DEF_MOD("scif1",	R9A07G044_SCIF1_CLK_PCK, R9A07G044_CLK_P0,
+					0x584, 1),
+		DEF_MOD("scif2",	R9A07G044_SCIF2_CLK_PCK, R9A07G044_CLK_P0,
+					0x584, 2),
+		DEF_MOD("scif3",	R9A07G044_SCIF3_CLK_PCK, R9A07G044_CLK_P0,
+					0x584, 3),
+		DEF_MOD("scif4",	R9A07G044_SCIF4_CLK_PCK, R9A07G044_CLK_P0,
+					0x584, 4),
+		DEF_MOD("sci0",		R9A07G044_SCI0_CLKP, R9A07G044_CLK_P0,
+					0x588, 0),
+		DEF_MOD("sci1",		R9A07G044_SCI1_CLKP, R9A07G044_CLK_P0,
+					0x588, 1),
+		DEF_MOD("rspi0",	R9A07G044_RSPI0_CLKB, R9A07G044_CLK_P0,
+					0x590, 0),
+		DEF_MOD("rspi1",	R9A07G044_RSPI1_CLKB, R9A07G044_CLK_P0,
+					0x590, 1),
+		DEF_MOD("rspi2",	R9A07G044_RSPI2_CLKB, R9A07G044_CLK_P0,
+					0x590, 2),
+		DEF_MOD("canfd",	R9A07G044_CANFD_PCLK, R9A07G044_CLK_P0,
+					0x594, 0),
+		DEF_MOD("gpio",		R9A07G044_GPIO_HCLK, R9A07G044_OSCCLK,
+					0x598, 0),
+		DEF_MOD("adc_adclk",	R9A07G044_ADC_ADCLK, R9A07G044_CLK_TSU,
+					0x5a8, 0),
+		DEF_MOD("adc_pclk",	R9A07G044_ADC_PCLK, R9A07G044_CLK_P0,
+					0x5a8, 1),
+		DEF_MOD("tsu_pclk",	R9A07G044_TSU_PCLK, R9A07G044_CLK_TSU,
+					0x5ac, 0),
+	},
+#ifdef CONFIG_CLK_R9A07G054
+	.drp = {
+	},
+#endif
 };
 
 static struct rzg2l_reset r9a07g044_resets[] = {
@@ -336,8 +359,8 @@ static const unsigned int r9a07g044_crit_mod_clks[] __initconst = {
 
 const struct rzg2l_cpg_info r9a07g044_cpg_info = {
 	/* Core Clocks */
-	.core_clks = r9a07g044_core_clks,
-	.num_core_clks = ARRAY_SIZE(r9a07g044_core_clks),
+	.core_clks = core_clks.common,
+	.num_core_clks = ARRAY_SIZE(core_clks.common),
 	.last_dt_core_clk = LAST_DT_CORE_CLK,
 	.num_total_core_clks = MOD_CLK_BASE,
 
@@ -346,11 +369,34 @@ const struct rzg2l_cpg_info r9a07g044_cpg_info = {
 	.num_crit_mod_clks = ARRAY_SIZE(r9a07g044_crit_mod_clks),
 
 	/* Module Clocks */
-	.mod_clks = r9a07g044_mod_clks,
-	.num_mod_clks = ARRAY_SIZE(r9a07g044_mod_clks),
+	.mod_clks = mod_clks.common,
+	.num_mod_clks = ARRAY_SIZE(mod_clks.common),
 	.num_hw_mod_clks = R9A07G044_TSU_PCLK + 1,
 
 	/* Resets */
 	.resets = r9a07g044_resets,
-	.num_resets = ARRAY_SIZE(r9a07g044_resets),
+	.num_resets = R9A07G044_TSU_PRESETN + 1, /* Last reset ID + 1 */
+};
+
+#ifdef CONFIG_CLK_R9A07G054
+const struct rzg2l_cpg_info r9a07g054_cpg_info = {
+	/* Core Clocks */
+	.core_clks = core_clks.common,
+	.num_core_clks = ARRAY_SIZE(core_clks.common) + ARRAY_SIZE(core_clks.drp),
+	.last_dt_core_clk = LAST_DT_CORE_CLK,
+	.num_total_core_clks = MOD_CLK_BASE,
+
+	/* Critical Module Clocks */
+	.crit_mod_clks = r9a07g044_crit_mod_clks,
+	.num_crit_mod_clks = ARRAY_SIZE(r9a07g044_crit_mod_clks),
+
+	/* Module Clocks */
+	.mod_clks = mod_clks.common,
+	.num_mod_clks = ARRAY_SIZE(mod_clks.common) + ARRAY_SIZE(mod_clks.drp),
+	.num_hw_mod_clks = R9A07G054_STPAI_ACLK_DRP + 1,
+
+	/* Resets */
+	.resets = r9a07g044_resets,
+	.num_resets = R9A07G054_STPAI_ARESETN + 1, /* Last reset ID + 1 */
 };
+#endif
diff --git a/drivers/clk/renesas/rzg2l-cpg.c b/drivers/clk/renesas/rzg2l-cpg.c
index edd0abe34a37..486d0656c58a 100644
--- a/drivers/clk/renesas/rzg2l-cpg.c
+++ b/drivers/clk/renesas/rzg2l-cpg.c
@@ -952,6 +952,12 @@ static const struct of_device_id rzg2l_cpg_match[] = {
 		.compatible = "renesas,r9a07g044-cpg",
 		.data = &r9a07g044_cpg_info,
 	},
+#endif
+#ifdef CONFIG_CLK_R9A07G054
+	{
+		.compatible = "renesas,r9a07g054-cpg",
+		.data = &r9a07g054_cpg_info,
+	},
 #endif
 	{ /* sentinel */ }
 };
diff --git a/drivers/clk/renesas/rzg2l-cpg.h b/drivers/clk/renesas/rzg2l-cpg.h
index 5729d102034b..ce657beaf160 100644
--- a/drivers/clk/renesas/rzg2l-cpg.h
+++ b/drivers/clk/renesas/rzg2l-cpg.h
@@ -203,5 +203,6 @@ struct rzg2l_cpg_info {
 };
 
 extern const struct rzg2l_cpg_info r9a07g044_cpg_info;
+extern const struct rzg2l_cpg_info r9a07g054_cpg_info;
 
 #endif
-- 
2.25.1

[PATCH 5.10.y-cip 11/24] clk: renesas: rzg2l: Remove unused notifiers

[Biju Das]

From: Phil Edworthy <phil.edworthy@renesas.com>

commit 53367bd28f3bf143355e66f20cb6cb83b70e9122 upstream.

notifiers is not used.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Link: https://lore.kernel.org/r/20220304143241.8523-1-phil.edworthy@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 drivers/clk/renesas/rzg2l-cpg.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/clk/renesas/rzg2l-cpg.c b/drivers/clk/renesas/rzg2l-cpg.c
index 486d0656c58a..b3a1533970e5 100644
--- a/drivers/clk/renesas/rzg2l-cpg.c
+++ b/drivers/clk/renesas/rzg2l-cpg.c
@@ -76,7 +76,6 @@ struct sd_hw_data {
  * @num_mod_clks: Number of Module Clocks in clks[]
  * @num_resets: Number of Module Resets in info->resets[]
  * @last_dt_core_clk: ID of the last Core Clock exported to DT
- * @notifiers: Notifier chain to save/restore clock state for system resume
  * @info: Pointer to platform data
  */
 struct rzg2l_cpg_priv {
@@ -91,7 +90,6 @@ struct rzg2l_cpg_priv {
 	unsigned int num_resets;
 	unsigned int last_dt_core_clk;
 
-	struct raw_notifier_head notifiers;
 	const struct rzg2l_cpg_info *info;
 };
 
-- 
2.25.1

[PATCH 5.10.y-cip 12/24] clk: renesas: rzg2l: Simplify multiplication/shift logic

[Biju Das]

From: Geert Uytterhoeven <geert+renesas@glider.be>

commit 29db30c45f07c929c86c40a5b85f18b69c89c638 upstream.

"a * (1 << b)" == "a << b".

No change in generated code.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/71e1cf2e30fb2d7966fc8ec6bab23eb7e24aa1c4.1645460687.git.geert+renesas@glider.be
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 drivers/clk/renesas/rzg2l-cpg.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/renesas/rzg2l-cpg.c b/drivers/clk/renesas/rzg2l-cpg.c
index b3a1533970e5..f626d2704477 100644
--- a/drivers/clk/renesas/rzg2l-cpg.c
+++ b/drivers/clk/renesas/rzg2l-cpg.c
@@ -289,7 +289,7 @@ static unsigned long rzg2l_cpg_pll_clk_recalc_rate(struct clk_hw *hw,
 	val1 = readl(priv->base + GET_REG_SAMPLL_CLK1(pll_clk->conf));
 	val2 = readl(priv->base + GET_REG_SAMPLL_CLK2(pll_clk->conf));
 	mult = MDIV(val1) + KDIV(val1) / 65536;
-	div = PDIV(val1) * (1 << SDIV(val2));
+	div = PDIV(val1) << SDIV(val2);
 
 	return DIV_ROUND_CLOSEST_ULL((u64)parent_rate * mult, div);
 }
-- 
2.25.1

[PATCH 5.10.y-cip 13/24] dt-bindings: serial: renesas,scif: Document RZ/V2L SoC

[Biju Das]

commit b0c86a6083229db0518e2754b2b6298e40e8d637 upstream.

Add SCIF binding documentation for Renesas RZ/V2L SoC. SCIF block on RZ/V2L
is identical to one found on the RZ/G2L SoC. No driver changes are required
as RZ/G2L compatible string "renesas,scif-r9a07g044" will be used as a
fallback.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211221094717.16187-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 Documentation/devicetree/bindings/serial/renesas,scif.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
index 701cb4936f3c..d1fd82aac212 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
@@ -66,6 +66,12 @@ properties:
       - items:
           - enum:
               - renesas,scif-r9a07g044      # RZ/G2{L,LC}
+              - renesas,scif-r9a07g054      # RZ/V2L
+
+      - items:
+          - enum:
+              - renesas,scif-r9a07g054      # RZ/V2L
+          - const: renesas,scif-r9a07g044   # RZ/G2{L,LC} fallback for RZ/V2L
 
   reg:
     maxItems: 1
@@ -151,6 +157,7 @@ if:
           - renesas,rcar-gen2-scif
           - renesas,rcar-gen3-scif
           - renesas,scif-r9a07g044
+          - renesas,scif-r9a07g054
 then:
   required:
     - resets
-- 
2.25.1

[PATCH 5.10.y-cip 14/24] dt-bindings: serial: renesas,sci: Document RZ/V2L SoC

[Biju Das]

commit a359101c7c6404d917a19d52133305ea284a0197 upstream.

Add SCI binding documentation for Renesas RZ/V2L SoC. No driver changes
are required as generic compatible string "renesas,sci" will be used as
a fallback.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211221094717.16187-8-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 Documentation/devicetree/bindings/serial/renesas,sci.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/serial/renesas,sci.yaml b/Documentation/devicetree/bindings/serial/renesas,sci.yaml
index f00b1d38e9a5..8dda4e10e09d 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,sci.yaml
@@ -18,6 +18,7 @@ properties:
       - items:
           - enum:
               - renesas,r9a07g044-sci     # RZ/G2{L,LC}
+              - renesas,r9a07g054-sci     # RZ/V2L
           - const: renesas,sci            # generic SCI compatible UART
 
       - items:
@@ -67,6 +68,7 @@ if:
       contains:
         enum:
           - renesas,r9a07g044-sci
+          - renesas,r9a07g054-sci
 then:
   properties:
     resets:
-- 
2.25.1

[PATCH 5.10.y-cip 15/24] dt-bindings: pinctrl: renesas: Document RZ/V2L pinctrl

[Biju Das]

commit c07b19de2f7ac91662aa99767815a258da6ef16f upstream.

Document Renesas RZ/V2L pinctrl bindings.  The RZ/V2L SoC is package-
and pin-compatible with RZ/G2L.  No driver changes are required as the
RZ/G2L compatible string "renesas,r9a07g044-pinctrl" will be used as a
fallback.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220110134659.30424-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 .../bindings/pinctrl/renesas,rzg2l-pinctrl.yaml   | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index 83488cd8673d..e4849a3680e0 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -4,14 +4,14 @@
 $id: http://devicetree.org/schemas/pinctrl/renesas,rzg2l-pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Renesas RZ/G2L combined Pin and GPIO controller
+title: Renesas RZ/{G2L,V2L} combined Pin and GPIO controller
 
 maintainers:
   - Geert Uytterhoeven <geert+renesas@glider.be>
   - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
 
 description:
-  The Renesas SoCs of the RZ/G2L series feature a combined Pin and GPIO
+  The Renesas SoCs of the RZ/{G2L,V2L} series feature a combined Pin and GPIO
   controller.
   Pin multiplexing and GPIO configuration is performed on a per-pin basis.
   Each port features up to 8 pins, each of them configurable for GPIO function
@@ -20,8 +20,15 @@ description:
 
 properties:
   compatible:
-    enum:
-      - renesas,r9a07g044-pinctrl # RZ/G2{L,LC}
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g044-pinctrl # RZ/G2{L,LC}
+
+      - items:
+          - enum:
+              - renesas,r9a07g054-pinctrl     # RZ/V2L
+          - const: renesas,r9a07g044-pinctrl  # RZ/G2{L,LC} fallback for RZ/V2L
 
   reg:
     maxItems: 1
-- 
2.25.1

[PATCH 5.10.y-cip 16/24] pinctrl: renesas: Kconfig: Select PINCTRL_RZG2L if RZ/V2L SoC is enabled

[Biju Das]

commit 0c8fce49f24e7c8ee2bdff4761f414ad59bfa29a upstream.

RZ/V2L uses the RZ/G2L GPIO and pinctrl driver.
Enable the RZ/G2L pinctrl driver if RZ/V2L is enabled.
Update the description for RZ/V2L pin control support.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220110134659.30424-8-prabhakar.mahadev-lad.rj@bp.renesas.com
Link: https://lore.kernel.org/r/20220206194614.13209-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 drivers/pinctrl/renesas/Kconfig | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/renesas/Kconfig b/drivers/pinctrl/renesas/Kconfig
index 356a70739689..623d0c01e259 100644
--- a/drivers/pinctrl/renesas/Kconfig
+++ b/drivers/pinctrl/renesas/Kconfig
@@ -37,6 +37,7 @@ config PINCTRL_RENESAS
 	select PINCTRL_PFC_R8A77990 if ARCH_R8A77990
 	select PINCTRL_PFC_R8A77995 if ARCH_R8A77995
 	select PINCTRL_RZG2L if ARCH_R9A07G044
+	select PINCTRL_RZG2L if ARCH_R9A07G054
 	select PINCTRL_PFC_SH7203 if CPU_SUBTYPE_SH7203
 	select PINCTRL_PFC_SH7264 if CPU_SUBTYPE_SH7264
 	select PINCTRL_PFC_SH7269 if CPU_SUBTYPE_SH7269
@@ -173,14 +174,15 @@ config PINCTRL_RZA2
 	  This selects GPIO and pinctrl driver for Renesas RZ/A2 platforms.
 
 config PINCTRL_RZG2L
-	bool "pin control support for RZ/G2L" if COMPILE_TEST
+	bool "pin control support for RZ/{G2L,V2L}" if COMPILE_TEST
 	depends on OF
 	select GPIOLIB
 	select GENERIC_PINCTRL_GROUPS
 	select GENERIC_PINMUX_FUNCTIONS
 	select GENERIC_PINCONF
 	help
-	  This selects GPIO and pinctrl driver for Renesas RZ/G2L platforms.
+	  This selects GPIO and pinctrl driver for Renesas RZ/{G2L,V2L}
+	  platforms.
 
 config PINCTRL_PFC_R8A77470
 	bool "pin control support for RZ/G1C" if COMPILE_TEST
-- 
2.25.1

[PATCH 5.10.y-cip 17/24] pinctrl: renesas: rzg2l: Improve rzg2l_gpio_register()

[Biju Das]

commit 2e08ab0427fe3e33a92a37cfe3b6db340ab7397f upstream.

Update rzg2l_gpio_register() to use driver data for chip->names
and check for gpio-range. This allows reusing the driver for
SoC's with different port pin definitions(eg:- RZ/G2UL SoC has
fewer ports compared to RZ/G2L and port pin definitions are
different).

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220206194614.13209-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index ccee9c9e2e22..cb805502fb0f 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -1090,12 +1090,12 @@ static int rzg2l_gpio_register(struct rzg2l_pinctrl *pctrl)
 	}
 
 	if (of_args.args[0] != 0 || of_args.args[1] != 0 ||
-	    of_args.args[2] != ARRAY_SIZE(rzg2l_gpio_names)) {
+	    of_args.args[2] != pctrl->data->n_port_pins) {
 		dev_err(pctrl->dev, "gpio-ranges does not match selected SOC\n");
 		return -EINVAL;
 	}
 
-	chip->names = rzg2l_gpio_names;
+	chip->names = pctrl->data->port_pins;
 	chip->request = rzg2l_gpio_request;
 	chip->free = rzg2l_gpio_free;
 	chip->get_direction = rzg2l_gpio_get_direction;
-- 
2.25.1

[PATCH 5.10.y-cip 18/24] dt-bindings: net: renesas,etheravb: Document RZ/V2L SoC

[Biju Das]

commit 654f89f9496db716c4e9a79c3c6193d57cfaa963 upstream.

Document Gigabit Ethernet IP found on RZ/V2L SoC. Gigabit Ethernet
Interface is identical to one found on the RZ/G2L SoC. No driver changes
are required as generic compatible string "renesas,rzg2l-gbeth" will be
used as a fallback.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 Documentation/devicetree/bindings/net/renesas,etheravb.yaml | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
index 5237949cfabe..80197259afa8 100644
--- a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
+++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
@@ -45,7 +45,8 @@ properties:
       - items:
           - enum:
               - renesas,r9a07g044-gbeth # RZ/G2{L,LC}
-          - const: renesas,rzg2l-gbeth  # RZ/G2L
+              - renesas,r9a07g054-gbeth # RZ/V2L
+          - const: renesas,rzg2l-gbeth  # RZ/{G2L,V2L} family
 
   reg: true
 
-- 
2.25.1

[PATCH 5.10.y-cip 19/24] arm64: dts: renesas: Add initial DTSI for RZ/V2L SoC

[Biju Das]

commit 7c2b8198f4f321df03e285a931fab2a33668c88d upstream.

The RZ/V2L SoC is package- and pin-compatible with RZ/G2L, the only
difference being that the RZ/V2L SoC has additional DRP-AI IP (AI
accelerator).

Add initial DTSI for the RZ/V2L SoC with below SoC specific dtsi files
for supporting single core and dual core devices:

    r9a07g054l1.dtsi => RZ/V2L R9A07G054L1 SoC specific parts
    r9a07g054l2.dtsi => RZ/V2L R9A07G054L2 SoC specific parts

Both the RZ/G2L and RZ/V2L SMARC EVK SoMs are identical apart from the
SoCs used, hence the common dtsi files (rzg2l-smarc*.dtsi) are shared
between the RZ/G2L and RZ/V2L SMARC EVKs.  Place holders are added in
device nodes to avoid compilation errors for devices which have not been
enabled yet on the RZ/V2L SoC.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220110134659.30424-11-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/r9a07g054.dtsi   | 491 +++++++++++++++++++
 arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi |  25 +
 arch/arm64/boot/dts/renesas/r9a07g054l2.dtsi |  13 +
 3 files changed, 529 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g054.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g054l2.dtsi

diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
new file mode 100644
index 000000000000..5d39e765c291
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
@@ -0,0 +1,491 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2L SoC
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r9a07g054-cpg.h>
+
+/ {
+	compatible = "renesas,r9a07g054";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	audio_clk1: audio_clk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by boards that provide it */
+		clock-frequency = <0>;
+	};
+
+	audio_clk2: audio_clk2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by boards that provide it */
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			#cooling-cells = <2>;
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A07G054_CLK_I>;
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A07G054_CLK_I>;
+		};
+
+		L3_CA55: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x40000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ssi0: ssi@10049c00 {
+			reg = <0 0x10049c00 0 0x400>;
+			#sound-dai-cells = <0>;
+			/* place holder */
+		};
+
+		spi1: spi@1004b000 {
+			reg = <0 0x1004b000 0 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* place holder */
+		};
+
+		scif0: serial@1004b800 {
+			compatible = "renesas,scif-r9a07g054",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004b800 0 0x400>;
+			interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCIF0_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCIF0_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif1: serial@1004bc00 {
+			compatible = "renesas,scif-r9a07g054",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004bc00 0 0x400>;
+			interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCIF1_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCIF1_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif2: serial@1004c000 {
+			compatible = "renesas,scif-r9a07g054",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004c000 0 0x400>;
+			interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCIF2_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCIF2_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif3: serial@1004c400 {
+			compatible = "renesas,scif-r9a07g054",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004c400 0 0x400>;
+			interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCIF3_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCIF3_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif4: serial@1004c800 {
+			compatible = "renesas,scif-r9a07g054",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004c800 0 0x400>;
+			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCIF4_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCIF4_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		sci0: serial@1004d000 {
+			compatible = "renesas,r9a07g054-sci", "renesas,sci";
+			reg = <0 0x1004d000 0 0x400>;
+			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCI0_CLKP>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCI0_RST>;
+			status = "disabled";
+		};
+
+		sci1: serial@1004d400 {
+			compatible = "renesas,r9a07g054-sci", "renesas,sci";
+			reg = <0 0x1004d400 0 0x400>;
+			interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCI1_CLKP>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCI1_RST>;
+			status = "disabled";
+		};
+
+		canfd: can@10050000 {
+			reg = <0 0x10050000 0 0x8000>;
+			/* place holder */
+		};
+
+		i2c0: i2c@10058000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x10058000 0 0x400>;
+			/* place holder */
+		};
+
+		i2c1: i2c@10058400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x10058400 0 0x400>;
+			/* place holder */
+		};
+
+		i2c3: i2c@10058c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x10058c00 0 0x400>;
+			/* place holder */
+		};
+
+		adc: adc@10059000 {
+			reg = <0 0x10059000 0 0x400>;
+			/* place holder */
+		};
+
+		sbc: spi@10060000 {
+			reg = <0 0x10060000 0 0x10000>,
+			      <0 0x20000000 0 0x10000000>,
+			      <0 0x10070000 0 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* place holder */
+		};
+
+		cpg: clock-controller@11010000 {
+			compatible = "renesas,r9a07g054-cpg";
+			reg = <0 0x11010000 0 0x10000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		sysc: system-controller@11020000 {
+			compatible = "renesas,r9a07g054-sysc";
+			reg = <0 0x11020000 0 0x10000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "lpm_int", "ca55stbydone_int",
+					  "cm33stbyr_int", "ca55_deny";
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@11030000 {
+			compatible = "renesas,r9a07g054-pinctrl",
+				     "renesas,r9a07g044-pinctrl";
+			reg = <0 0x11030000 0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 392>;
+			clocks = <&cpg CPG_MOD R9A07G054_GPIO_HCLK>;
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_GPIO_RSTN>,
+				 <&cpg R9A07G054_GPIO_PORT_RESETN>,
+				 <&cpg R9A07G054_GPIO_SPARE_RESETN>;
+		};
+
+		dmac: dma-controller@11820000 {
+			compatible = "renesas,r9a07g054-dmac",
+				     "renesas,rz-dmac";
+			reg = <0 0x11820000 0 0x10000>,
+			      <0 0x11830000 0 0x10000>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD R9A07G054_DMAC_ACLK>,
+				 <&cpg CPG_MOD R9A07G054_DMAC_PCLK>;
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_DMAC_ARESETN>,
+				 <&cpg R9A07G054_DMAC_RST_ASYNC>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		gpu: gpu@11840000 {
+			reg = <0x0 0x11840000 0x0 0x10000>;
+			/* place holder */
+		};
+
+		gic: interrupt-controller@11900000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0x11900000 0 0x40000>,
+			      <0x0 0x11940000 0 0x60000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		sdhi0: mmc@11c00000  {
+			reg = <0x0 0x11c00000 0 0x10000>;
+			/* place holder */
+		};
+
+		sdhi1: mmc@11c10000 {
+			reg = <0x0 0x11c10000 0 0x10000>;
+			/* place holder */
+		};
+
+		eth0: ethernet@11c20000 {
+			compatible = "renesas,r9a07g054-gbeth",
+				     "renesas,rzg2l-gbeth";
+			reg = <0 0x11c20000 0 0x10000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A07G054_ETH0_CLK_AXI>,
+				 <&cpg CPG_MOD R9A07G054_ETH0_CLK_CHI>,
+				 <&cpg CPG_CORE R9A07G054_CLK_HP>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A07G054_ETH0_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		eth1: ethernet@11c30000 {
+			compatible = "renesas,r9a07g054-gbeth",
+				     "renesas,rzg2l-gbeth";
+			reg = <0 0x11c30000 0 0x10000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A07G054_ETH1_CLK_AXI>,
+				 <&cpg CPG_MOD R9A07G054_ETH1_CLK_CHI>,
+				 <&cpg CPG_CORE R9A07G054_CLK_HP>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A07G054_ETH1_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		phyrst: usbphy-ctrl@11c40000 {
+			reg = <0 0x11c40000 0 0x10000>;
+			/* place holder */
+		};
+
+		ohci0: usb@11c50000 {
+			reg = <0 0x11c50000 0 0x100>;
+			/* place holder */
+		};
+
+		ohci1: usb@11c70000 {
+			reg = <0 0x11c70000 0 0x100>;
+			/* place holder */
+		};
+
+		ehci0: usb@11c50100 {
+			reg = <0 0x11c50100 0 0x100>;
+			/* place holder */
+		};
+
+		ehci1: usb@11c70100 {
+			reg = <0 0x11c70100 0 0x100>;
+			/* place holder */
+		};
+
+		usb2_phy0: usb-phy@11c50200 {
+			reg = <0 0x11c50200 0 0x700>;
+			/* place holder */
+		};
+
+		usb2_phy1: usb-phy@11c70200 {
+			reg = <0 0x11c70200 0 0x700>;
+			/* place holder */
+		};
+
+		hsusb: usb@11c60000 {
+			reg = <0 0x11c60000 0 0x10000>;
+			/* place holder */
+		};
+
+		wdt0: watchdog@12800800 {
+			reg = <0 0x12800800 0 0x400>;
+			/* place holder */
+		};
+
+		wdt1: watchdog@12800c00 {
+			reg = <0 0x12800C00 0 0x400>;
+			/* place holder */
+		};
+
+		wdt2: watchdog@12800400 {
+			reg = <0 0x12800400 0 0x400>;
+			/* place holder */
+		};
+
+		ostm0: timer@12801000 {
+			reg = <0x0 0x12801000 0x0 0x400>;
+			/* place holder */
+		};
+
+		ostm1: timer@12801400 {
+			reg = <0x0 0x12801400 0x0 0x400>;
+			/* place holder */
+		};
+
+		ostm2: timer@12801800 {
+			reg = <0x0 0x12801800 0x0 0x400>;
+			/* place holder */
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi
new file mode 100644
index 000000000000..c448cc6634c1
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2L R9A07G054L1 SoC specific parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g054.dtsi"
+
+/ {
+	compatible = "renesas,r9a07g054l1", "renesas,r9a07g054";
+
+	cpus {
+		/delete-node/ cpu-map;
+		/delete-node/ cpu@100;
+	};
+
+	timer {
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l2.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054l2.dtsi
new file mode 100644
index 000000000000..4d5914bc95d3
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g054l2.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2L R9A07G054L2 SoC specific parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g054.dtsi"
+
+/ {
+	compatible = "renesas,r9a07g054l2", "renesas,r9a07g054";
+};
-- 
2.25.1

[PATCH 5.10.y-cip 20/24] arm64: dts: renesas: Add initial device tree for RZ/V2L SMARC EVK

[Biju Das]

commit f91c4c74796acca0a5a3bde747948a844eb2c30b upstream.

Add basic support for the RZ/V2L SMARC EVK (based on R9A07G054L2):
- memory
- External input clock
- CPG
- Pin controller
- SCIF
- GbEthernet
- Audio Clock

It shares the same carrier board with RZ/G2L with the same pin mapping.
Delete the gpio-hog nodes from pinctrl as they will be added later when
the functionality has been tested.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220110134659.30424-12-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/Makefile          |  2 ++
 .../boot/dts/renesas/r9a07g054l2-smarc.dts    | 25 +++++++++++++++++++
 .../dts/renesas/rzg2l-smarc-pinfunction.dtsi  |  2 +-
 .../boot/dts/renesas/rzg2l-smarc-som.dtsi     |  2 +-
 arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi  |  2 +-
 5 files changed, 30 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 962a66332236..8815c5eb4cfc 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -59,3 +59,5 @@ dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb
 
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc.dtb
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
+
+dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
new file mode 100644
index 000000000000..39ef55bfe0c3
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L SMARC EVK board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g054l2.dtsi"
+#include "rzg2l-smarc-som.dtsi"
+#include "rzg2l-smarc-pinfunction.dtsi"
+#include "rzg2l-smarc.dtsi"
+
+/ {
+	model = "Renesas SMARC EVK based on r9a07g054l2";
+	compatible = "renesas,smarc-evk", "renesas,r9a07g054l2", "renesas,r9a07g054";
+};
+
+&pinctrl {
+	/delete-node/ can0-stb;
+	/delete-node/ can1-stb;
+	/delete-node/ gpio-sd0-pwr-en-hog;
+	/delete-node/ sd0-dev-sel-hog;
+	/delete-node/ sd1-pwr-en-hog;
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
index 71d83e447670..2ef217445f72 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
- * Device Tree Source for the RZ/G2L SMARC pincontrol parts
+ * Device Tree Source for the RZ/{G2L,V2L} SMARC pincontrol parts
  *
  * Copyright (C) 2021 Renesas Electronics Corp.
  */
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
index 41fdae7ba66b..879375c0395e 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
- * Device Tree Source for the RZ/G2L SMARC SOM common parts
+ * Device Tree Source for the RZ/{G2L,V2L} SMARC SOM common parts
  *
  * Copyright (C) 2021 Renesas Electronics Corp.
  */
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
index 46abb29718cc..78034f36156d 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
- * Device Tree Source for the RZ/G2L SMARC EVK common parts
+ * Device Tree Source for the RZ/{G2L,V2L} SMARC EVK common parts
  *
  * Copyright (C) 2021 Renesas Electronics Corp.
  */
-- 
2.25.1

[PATCH 5.10.y-cip 21/24] arm64: defconfig: Enable ARCH_R9A07G054

[Biju Das]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit ca9df4a75a208f3294a9a09b84ffa1bc89d3e0df upstream.

Enable support for the Renesas RZ/V2L SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220308140033.10501-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 58a79a3e1cd0..7975a4b6a84a 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -963,6 +963,7 @@ CONFIG_ARCH_R8A77980=y
 CONFIG_ARCH_R8A77990=y
 CONFIG_ARCH_R8A77995=y
 CONFIG_ARCH_R9A07G044=y
+CONFIG_ARCH_R9A07G054=y
 CONFIG_ROCKCHIP_PM_DOMAINS=y
 CONFIG_ARCH_TEGRA_132_SOC=y
 CONFIG_ARCH_TEGRA_210_SOC=y
-- 
2.25.1

[PATCH 5.10.y-cip 22/24] arm64: dts: renesas: rzg2l-smarc: Add common dtsi file

[Biju Das]

commit 726fd781195dc99cdcb60b2678694bfa5ccd1825 upstream.

RZ/{G2L,V2L} and G2LC SoC use the same carrier board, but the SoM is
different.

Different pin mapping is possible on SoM. For eg:- RZ/G2L SMARC EVK
uses SCIF2, whereas RZ/G2LC uses SCIF1 for the serial interface available
on PMOD1.

This patch adds support for handling the pin mapping differences by moving
definitions common to RZ/G2L and RZ/G2LC to a common dtsi file.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220203170636.7747-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 .../boot/dts/renesas/r9a07g044c2-smarc.dts    |   9 +-
 .../boot/dts/renesas/r9a07g044l2-smarc.dts    |   1 +
 .../boot/dts/renesas/r9a07g054l2-smarc.dts    |   1 +
 .../boot/dts/renesas/rz-smarc-common.dtsi     | 207 ++++++++++++++++++
 arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi  | 193 ----------------
 5 files changed, 210 insertions(+), 201 deletions(-)
 create mode 100644 arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi

diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
index 8d671111d973..af84fd6c8a81 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
@@ -9,12 +9,11 @@
 #include "r9a07g044c2.dtsi"
 #include "rzg2lc-smarc-som.dtsi"
 #include "rzg2lc-smarc-pinfunction.dtsi"
-#include "rzg2l-smarc.dtsi"
+#include "rz-smarc-common.dtsi"
 
 / {
 	model = "Renesas SMARC EVK based on r9a07g044c2";
 	compatible = "renesas,smarc-evk", "renesas,r9a07g044c2", "renesas,r9a07g044";
-
 };
 
 &canfd {
@@ -75,12 +74,6 @@ &phyrst {
 	status = "disabled";
 };
 
-&scif2 {
-	/delete-property/ pinctrl-0;
-	/delete-property/ pinctrl-names;
-	status = "disabled";
-};
-
 &spi1 {
 	/delete-property/ pinctrl-0;
 	/delete-property/ pinctrl-names;
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
index 886d38886d05..bc2af6c92ccd 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
@@ -9,6 +9,7 @@
 #include "r9a07g044l2.dtsi"
 #include "rzg2l-smarc-som.dtsi"
 #include "rzg2l-smarc-pinfunction.dtsi"
+#include "rz-smarc-common.dtsi"
 #include "rzg2l-smarc.dtsi"
 
 / {
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
index 39ef55bfe0c3..49d141db53f7 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
@@ -9,6 +9,7 @@
 #include "r9a07g054l2.dtsi"
 #include "rzg2l-smarc-som.dtsi"
 #include "rzg2l-smarc-pinfunction.dtsi"
+#include "rz-smarc-common.dtsi"
 #include "rzg2l-smarc.dtsi"
 
 / {
diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi
new file mode 100644
index 000000000000..588117aafaca
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/{G2L,G2LC,V2L} SMARC EVK common parts
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/*
+ * SSI-WM8978
+ *
+ * This command is required when Playback/Capture
+ *
+ *	amixer cset name='Left Input Mixer L2 Switch' on
+ *	amixer cset name='Right Input Mixer R2 Switch' on
+ *	amixer cset name='Headphone Playback Volume' 100
+ *	amixer cset name='PCM Volume' 100%
+ *	amixer cset name='Input PGA Volume' 25
+ *
+ */
+
+/ {
+	aliases {
+		serial0 = &scif0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c3 = &i2c3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	audio_mclock: audio_mclock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	snd_rzg2l: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&cpu_dai>;
+		simple-audio-card,frame-master = <&cpu_dai>;
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,widgets = "Microphone", "Microphone Jack";
+		simple-audio-card,routing =
+			    "L2", "Mic Bias",
+			    "R2", "Mic Bias",
+			    "Mic Bias", "Microphone Jack";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&ssi0>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			clocks = <&audio_mclock>;
+			sound-dai = <&wm8978>;
+		};
+	};
+
+	usb0_vbus_otg: regulator-usb0-vbus-otg {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB0_VBUS_OTG";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+};
+
+&audio_clk1{
+	clock-frequency = <11289600>;
+};
+
+&audio_clk2{
+	clock-frequency = <12288000>;
+};
+
+&canfd {
+	pinctrl-0 = <&can0_pins &can1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	channel0 {
+		status = "okay";
+	};
+
+	channel1 {
+		status = "okay";
+	};
+};
+
+&ehci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	wm8978: codec@1a {
+		compatible = "wlf,wm8978";
+		#sound-dai-cells = <0>;
+		reg = <0x1a>;
+	};
+};
+
+&ohci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&phyrst {
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ssi0 {
+	pinctrl-0 = <&ssi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	vbus-supply = <&usb0_vbus_otg>;
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
index 78034f36156d..33ddfd18bd56 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
@@ -8,164 +8,13 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
 
-/*
- * SSI-WM8978
- *
- * This command is required when Playback/Capture
- *
- *	amixer cset name='Left Input Mixer L2 Switch' on
- *	amixer cset name='Right Input Mixer R2 Switch' on
- *	amixer cset name='Headphone Playback Volume' 100
- *	amixer cset name='PCM Volume' 100%
- *	amixer cset name='Input PGA Volume' 25
- *
- */
-
 /* comment the #define statement to disable SCIF2 (SER0) on PMOD1 (CN7) */
 #define PMOD1_SER0	1
 
 / {
 	aliases {
-		serial0 = &scif0;
 		serial1 = &scif2;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c3 = &i2c3;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	audio_mclock: audio_mclock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <11289600>;
-	};
-
-	snd_rzg2l: sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&cpu_dai>;
-		simple-audio-card,frame-master = <&cpu_dai>;
-		simple-audio-card,mclk-fs = <256>;
-
-		simple-audio-card,widgets = "Microphone", "Microphone Jack";
-		simple-audio-card,routing =
-			    "L2", "Mic Bias",
-			    "R2", "Mic Bias",
-			    "Mic Bias", "Microphone Jack";
-
-		cpu_dai: simple-audio-card,cpu {
-			sound-dai = <&ssi0>;
-		};
-
-		codec_dai: simple-audio-card,codec {
-			clocks = <&audio_mclock>;
-			sound-dai = <&wm8978>;
-		};
-	};
-
-	usb0_vbus_otg: regulator-usb0-vbus-otg {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB0_VBUS_OTG";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	vccq_sdhi1: regulator-vccq-sdhi1 {
-		compatible = "regulator-gpio";
-		regulator-name = "SDHI1 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-};
-
-&audio_clk1{
-	clock-frequency = <11289600>;
-};
-
-&audio_clk2{
-	clock-frequency = <12288000>;
-};
-
-&canfd {
-	pinctrl-0 = <&can0_pins &can1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	channel0 {
-		status = "okay";
 	};
-
-	channel1 {
-		status = "okay";
-	};
-};
-
-&ehci0 {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&hsusb {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-0 = <&i2c1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-0 = <&i2c3_pins>;
-	pinctrl-names = "default";
-	clock-frequency = <400000>;
-
-	status = "okay";
-
-	wm8978: codec@1a {
-		compatible = "wlf,wm8978";
-		#sound-dai-cells = <0>;
-		reg = <0x1a>;
-	};
-};
-
-&ohci0 {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&ohci1 {
-	status = "okay";
-};
-
-&phyrst {
-	status = "okay";
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
 };
 
 /*
@@ -184,45 +33,3 @@ &scif2 {
 	status = "okay";
 };
 #endif
-
-&sdhi1 {
-	pinctrl-0 = <&sdhi1_pins>;
-	pinctrl-1 = <&sdhi1_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&vccq_sdhi1>;
-	bus-width = <4>;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	status = "okay";
-};
-
-&spi1 {
-	pinctrl-0 = <&spi1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&ssi0 {
-	pinctrl-0 = <&ssi0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&usb2_phy0 {
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-
-	vbus-supply = <&usb0_vbus_otg>;
-	status = "okay";
-};
-
-&usb2_phy1 {
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-- 
2.25.1

[PATCH 5.10.y-cip 23/24] arm64: dts: renesas: rzg2lc-smarc: Add macros for DIP-Switch settings

[Biju Das]

commit 2ed3b5d9540b246d7a1ec98971914ee810b40086 upstream.

RZ/G2LC SoM uses DIP-SWitch SW1 for various pin multiplexing functions.

This patch describes DIP-SWitch SW1 settings on SoM and adds the
corresponding macros for enabling pinmux functionality on RZ/G2LC
SMARC EVK.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220203170636.7747-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 .../boot/dts/renesas/r9a07g044c2-smarc.dts    |  4 +--
 arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi | 36 +++++++++++++++++++
 2 files changed, 37 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi

diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
index af84fd6c8a81..50abdabc374a 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
@@ -7,9 +7,7 @@
 
 /dts-v1/;
 #include "r9a07g044c2.dtsi"
-#include "rzg2lc-smarc-som.dtsi"
-#include "rzg2lc-smarc-pinfunction.dtsi"
-#include "rz-smarc-common.dtsi"
+#include "rzg2lc-smarc.dtsi"
 
 / {
 	model = "Renesas SMARC EVK based on r9a07g044c2";
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
new file mode 100644
index 000000000000..ca5ca7ce6692
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC SMARC EVK parts
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/*
+ * DIP-Switch SW1 setting on SoM
+ * 1 : High; 0: Low
+ * SW1-2 : SW_SD0_DEV_SEL	(1: eMMC; 0: uSD)
+ * SW1-3 : SW_SCIF_CAN		(1: CAN1; 0: SCIF1)
+ * SW1-4 : SW_RSPI_CAN		(1: CAN1; 0: RSPI1)
+ * SW1-5 : SW_I2S0_I2S1		(1: I2S2 (HDMI audio); 0: I2S0)
+ * Please change below macros according to SW1 setting
+ */
+
+#define SW_SCIF_CAN	0
+#if (SW_SCIF_CAN)
+/* Due to HW routing, SW_RSPI_CAN is always 0 when SW_SCIF_CAN is set to 1 */
+#define SW_RSPI_CAN	0
+#else
+/* Please set SW_RSPI_CAN. Default value is 1 */
+#define SW_RSPI_CAN	1
+#endif
+
+#if (SW_SCIF_CAN & SW_RSPI_CAN)
+#error "Can not set 1 to both SW_SCIF_CAN and SW_RSPI_CAN due to HW routing"
+#endif
+
+#include "rzg2lc-smarc-som.dtsi"
+#include "rzg2lc-smarc-pinfunction.dtsi"
+#include "rz-smarc-common.dtsi"
-- 
2.25.1

[PATCH 5.10.y-cip 24/24] arm64: dts: renesas: rzg2lc-smarc: Enable SCIF1 on carrier board

[Biju Das]

commit fa00d6dc19283bee13f0390546f741293f6d2d9a upstream.

SCIF1 interface is available on PMOD1 connector (CN7) on carrier board.

This patch adds pinmux and scif1 node to carrier board dtsi file for
RZ/G2LC SMARC EVK.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220203170636.7747-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 .../dts/renesas/rzg2lc-smarc-pinfunction.dtsi |  7 +++++
 arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi | 26 +++++++++++++++++++
 2 files changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
index 1032f6563515..ec9e08ec0822 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
@@ -17,6 +17,13 @@ scif0_pins: scif0 {
 			 <RZG2L_PORT_PINMUX(38, 1, 1)>;	/* RxD */
 	};
 
+	scif1_pins: scif1 {
+		pinmux = <RZG2L_PORT_PINMUX(40, 0, 1)>, /* TxD */
+			 <RZG2L_PORT_PINMUX(40, 1, 1)>, /* RxD */
+			 <RZG2L_PORT_PINMUX(41, 0, 1)>, /* CTS# */
+			 <RZG2L_PORT_PINMUX(41, 1, 1)>; /* RTS# */
+	};
+
 	sd1-pwr-en-hog {
 		gpio-hog;
 		gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
index ca5ca7ce6692..1b59ef376296 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
@@ -34,3 +34,29 @@
 #include "rzg2lc-smarc-som.dtsi"
 #include "rzg2lc-smarc-pinfunction.dtsi"
 #include "rz-smarc-common.dtsi"
+
+/* comment the #define statement to disable SCIF1 (SER0) on PMOD1 (CN7) */
+#define PMOD1_SER0	1
+
+/ {
+	aliases {
+		serial1 = &scif1;
+	};
+};
+
+/*
+ * To enable SCIF1 (SER0) on PMOD1 (CN7), On connector board
+ * SW1 should be at position 2->3 so that SER0_CTS# line is activated
+ * SW2 should be at position 2->3 so that SER0_TX line is activated
+ * SW3 should be at position 2->3 so that SER0_RX line is activated
+ * SW4 should be at position 2->3 so that SER0_RTS# line is activated
+ */
+#if (!SW_SCIF_CAN && PMOD1_SER0)
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+#endif
-- 
2.25.1

Re: [PATCH 5.10.y-cip 02/24] arm64: dts: renesas: Add initial device tree for RZ/G2LC SMARC EVK

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 900 bytes --]

Hi!
> 
> Add basic support for the RZ/G2LC SMARC EVK (based on R9A07G044C2):
> - memory
> - External input clock
> - SCIF
> - GbEthernet
> - Audio Clock
> 
> It shares the same carrier board with RZ/G2L, but the pin mapping is
> different.  Disable the device nodes which are not tested and delete the
> corresponding pinctrl definitions.
> 
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>

Git is a bit unhappy with blank lines --

Applying: arm64: dts: renesas: Add initial device tree for RZ/G2LC SMARC EVK
.git/rebase-apply/patch:171: new blank line at EOF.
+
.git/rebase-apply/patch:253: new blank line at EOF.
+

-- but as before that is probably not worth solving in separate patch.

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 5.10.y-cip 10/24] clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoC

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 3488 bytes --]

Hi!

> commit a1bcf50a99dd1e40f0c6a963bd4f12547a89d4cd upstream.
> 
> The clock structure for RZ/V2L is almost identical to the RZ/G2L SoC.
> The only difference being that RZ/V2L has additional registers to
> control clocks and resets for the DRP-AI block.
> 
> Reuse r9a07g044-cpg.c, as the clock IDs and reset IDs are the same
> between RZ/G2L and RZ/V2L, and add a separate r9a07g054_cpg_info to take
> care of the DRP-AI clocks/resets.

Ok, so this reuse is quite interesting.


> +++ b/drivers/clk/renesas/Makefile
> @@ -30,6 +30,7 @@ obj-$(CONFIG_CLK_R8A77995)		+= r8a77995-cpg-mssr.o
>  obj-$(CONFIG_CLK_R8A779A0)		+= r8a779a0-cpg-mssr.o
>  obj-$(CONFIG_CLK_R9A06G032)		+= r9a06g032-clocks.o
>  obj-$(CONFIG_CLK_R9A07G044)		+= r9a07g044-cpg.o
> +obj-$(CONFIG_CLK_R9A07G054)		+= r9a07g044-cpg.o
>  obj-$(CONFIG_CLK_SH73A0)		+= clk-sh73a0.o

They share the same source file, but the file will be different basen
on config options.

If you enable CONFIG_CLK_R9A07G044, you get g044 support but not g054
support.

If you enable CONFIG_CLK_R9A07G054, you get both g044 and g054
support, you can't disable g044.

This is quite strange, but probably not a problem. For symmetry, I'd
not mind conditional compilation of g044 parts; or perhaps even better
get rid of condtional compilation of g045 parts -- I don't believe
space savings are significant.

Best regards,
								Pavel


> index 46359afef0d4..bdfabb992a20 100644
> --- a/drivers/clk/renesas/r9a07g044-cpg.c
> +++ b/drivers/clk/renesas/r9a07g044-cpg.c
> +
> +#ifdef CONFIG_CLK_R9A07G054
> +const struct rzg2l_cpg_info r9a07g054_cpg_info = {
> +	/* Core Clocks */
> +	.core_clks = core_clks.common,
> +	.num_core_clks = ARRAY_SIZE(core_clks.common) + ARRAY_SIZE(core_clks.drp),
> +	.last_dt_core_clk = LAST_DT_CORE_CLK,
> +	.num_total_core_clks = MOD_CLK_BASE,
> +
> +	/* Critical Module Clocks */
> +	.crit_mod_clks = r9a07g044_crit_mod_clks,
> +	.num_crit_mod_clks = ARRAY_SIZE(r9a07g044_crit_mod_clks),
> +
> +	/* Module Clocks */
> +	.mod_clks = mod_clks.common,
> +	.num_mod_clks = ARRAY_SIZE(mod_clks.common) + ARRAY_SIZE(mod_clks.drp),
> +	.num_hw_mod_clks = R9A07G054_STPAI_ACLK_DRP + 1,
> +
> +	/* Resets */
> +	.resets = r9a07g044_resets,
> +	.num_resets = R9A07G054_STPAI_ARESETN + 1, /* Last reset ID + 1 */
>  };
> +#endif
> diff --git a/drivers/clk/renesas/rzg2l-cpg.c b/drivers/clk/renesas/rzg2l-cpg.c
> index edd0abe34a37..486d0656c58a 100644
> --- a/drivers/clk/renesas/rzg2l-cpg.c
> +++ b/drivers/clk/renesas/rzg2l-cpg.c
> @@ -952,6 +952,12 @@ static const struct of_device_id rzg2l_cpg_match[] = {
>  		.compatible = "renesas,r9a07g044-cpg",
>  		.data = &r9a07g044_cpg_info,
>  	},
> +#endif
> +#ifdef CONFIG_CLK_R9A07G054
> +	{
> +		.compatible = "renesas,r9a07g054-cpg",
> +		.data = &r9a07g054_cpg_info,
> +	},
>  #endif
>  	{ /* sentinel */ }
>  };
> diff --git a/drivers/clk/renesas/rzg2l-cpg.h b/drivers/clk/renesas/rzg2l-cpg.h
> index 5729d102034b..ce657beaf160 100644
> --- a/drivers/clk/renesas/rzg2l-cpg.h
> +++ b/drivers/clk/renesas/rzg2l-cpg.h
> @@ -203,5 +203,6 @@ struct rzg2l_cpg_info {
>  };
>  
>  extern const struct rzg2l_cpg_info r9a07g044_cpg_info;
> +extern const struct rzg2l_cpg_info r9a07g054_cpg_info;
>  
>  #endif
> -- 
> 2.25.1
> 

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 5.10.y-cip 00/24] Add RZ/{G2LC, V2L} support

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 577 bytes --]

Hi!

> This patch series aims to add Basic board support for SMARC EVK
> based on RZ/G2LC and RZ/V2L SoC. RZ/{G2L, G2LC, V2L} share the same
> SMARC EVK board, but SoM is different and pin mapping of SoM
> module is different.
> 
> All these patches are cherry-picked from the mainline.

Series looks okay to me. I can apply it if there are no other commands
(and if it passes testing).

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

RE: [PATCH 5.10.y-cip 10/24] clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoC

[Biju Das]

Hi Pavel,

Thanks for the feedback.

> Subject: Re: [PATCH 5.10.y-cip 10/24] clk: renesas: rzg2l-cpg: Add
> support for RZ/V2L SoC
> 
> Hi!
> 
> > commit a1bcf50a99dd1e40f0c6a963bd4f12547a89d4cd upstream.
> >
> > The clock structure for RZ/V2L is almost identical to the RZ/G2L SoC.
> > The only difference being that RZ/V2L has additional registers to
> > control clocks and resets for the DRP-AI block.
> >
> > Reuse r9a07g044-cpg.c, as the clock IDs and reset IDs are the same
> > between RZ/G2L and RZ/V2L, and add a separate r9a07g054_cpg_info to
> > take care of the DRP-AI clocks/resets.
> 
> Ok, so this reuse is quite interesting.
> 
> 
> > +++ b/drivers/clk/renesas/Makefile
> > @@ -30,6 +30,7 @@ obj-$(CONFIG_CLK_R8A77995)		+= r8a77995-cpg-
> mssr.o
> >  obj-$(CONFIG_CLK_R8A779A0)		+= r8a779a0-cpg-mssr.o
> >  obj-$(CONFIG_CLK_R9A06G032)		+= r9a06g032-clocks.o
> >  obj-$(CONFIG_CLK_R9A07G044)		+= r9a07g044-cpg.o
> > +obj-$(CONFIG_CLK_R9A07G054)		+= r9a07g044-cpg.o
> >  obj-$(CONFIG_CLK_SH73A0)		+= clk-sh73a0.o
> 
> They share the same source file, but the file will be different basen on
> config options.
> 
> If you enable CONFIG_CLK_R9A07G044, you get g044 support but not g054
> support.
> 
> If you enable CONFIG_CLK_R9A07G054, you get both g044 and g054 support,
> you can't disable g044.

This is not true, we can disable g044 still. see rzg2l_cpg.c, there is a guard
for CONFIG_CLK_R9A07G044.

In this case,We will get unused variable warning for r9a07g044_cpg_info.

> 
> This is quite strange, but probably not a problem. For symmetry, I'd not
> mind conditional compilation of g044 parts; 

OK, will send patch for adding guard for r9a07g044_cpg_info.

or perhaps even better get
> rid of condtional compilation of g045 parts -- I don't believe space
> savings are significant.

Yes true, still it saves some bytes.

Cheers,
Biju

> 
> 
> > index 46359afef0d4..bdfabb992a20 100644
> > --- a/drivers/clk/renesas/r9a07g044-cpg.c
> > +++ b/drivers/clk/renesas/r9a07g044-cpg.c
> > +
> > +#ifdef CONFIG_CLK_R9A07G054
> > +const struct rzg2l_cpg_info r9a07g054_cpg_info = {
> > +	/* Core Clocks */
> > +	.core_clks = core_clks.common,
> > +	.num_core_clks = ARRAY_SIZE(core_clks.common) +
> ARRAY_SIZE(core_clks.drp),
> > +	.last_dt_core_clk = LAST_DT_CORE_CLK,
> > +	.num_total_core_clks = MOD_CLK_BASE,
> > +
> > +	/* Critical Module Clocks */
> > +	.crit_mod_clks = r9a07g044_crit_mod_clks,
> > +	.num_crit_mod_clks = ARRAY_SIZE(r9a07g044_crit_mod_clks),
> > +
> > +	/* Module Clocks */
> > +	.mod_clks = mod_clks.common,
> > +	.num_mod_clks = ARRAY_SIZE(mod_clks.common) +
> ARRAY_SIZE(mod_clks.drp),
> > +	.num_hw_mod_clks = R9A07G054_STPAI_ACLK_DRP + 1,
> > +
> > +	/* Resets */
> > +	.resets = r9a07g044_resets,
> > +	.num_resets = R9A07G054_STPAI_ARESETN + 1, /* Last reset ID + 1 */
> >  };
> > +#endif
> > diff --git a/drivers/clk/renesas/rzg2l-cpg.c
> > b/drivers/clk/renesas/rzg2l-cpg.c index edd0abe34a37..486d0656c58a
> > 100644
> > --- a/drivers/clk/renesas/rzg2l-cpg.c
> > +++ b/drivers/clk/renesas/rzg2l-cpg.c
> > @@ -952,6 +952,12 @@ static const struct of_device_id
> rzg2l_cpg_match[] = {
> >  		.compatible = "renesas,r9a07g044-cpg",
> >  		.data = &r9a07g044_cpg_info,
> >  	},
> > +#endif
> > +#ifdef CONFIG_CLK_R9A07G054
> > +	{
> > +		.compatible = "renesas,r9a07g054-cpg",
> > +		.data = &r9a07g054_cpg_info,
> > +	},
> >  #endif
> >  	{ /* sentinel */ }
> >  };
> > diff --git a/drivers/clk/renesas/rzg2l-cpg.h
> > b/drivers/clk/renesas/rzg2l-cpg.h index 5729d102034b..ce657beaf160
> > 100644
> > --- a/drivers/clk/renesas/rzg2l-cpg.h
> > +++ b/drivers/clk/renesas/rzg2l-cpg.h
> > @@ -203,5 +203,6 @@ struct rzg2l_cpg_info {  };
> >
> >  extern const struct rzg2l_cpg_info r9a07g044_cpg_info;
> > +extern const struct rzg2l_cpg_info r9a07g054_cpg_info;
> >
> >  #endif
> > --
> > 2.25.1
> >
> 
> --
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

RE: [PATCH 5.10.y-cip 02/24] arm64: dts: renesas: Add initial device tree for RZ/G2LC SMARC EVK

[Biju Das]

Hi Pavel,

Thanks for the feedback.

> Subject: Re: [PATCH 5.10.y-cip 02/24] arm64: dts: renesas: Add initial
> device tree for RZ/G2LC SMARC EVK
> 
> Hi!
> >
> > Add basic support for the RZ/G2LC SMARC EVK (based on R9A07G044C2):
> > - memory
> > - External input clock
> > - SCIF
> > - GbEthernet
> > - Audio Clock
> >
> > It shares the same carrier board with RZ/G2L, but the pin mapping is
> > different.  Disable the device nodes which are not tested and delete
> > the corresponding pinctrl definitions.
> >
> > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> 
> Git is a bit unhappy with blank lines --
> 
> Applying: arm64: dts: renesas: Add initial device tree for RZ/G2LC SMARC
> EVK
> .git/rebase-apply/patch:171: new blank line at EOF.
> +
> .git/rebase-apply/patch:253: new blank line at EOF.
> +
> 
> -- but as before that is probably not worth solving in separate patch.

OK, will fix this in mainline when I get a chance to work on this file.

Cheers,
Biju

RE: [PATCH 5.10.y-cip 00/24] Add RZ/{G2LC, V2L} support

[nobuhiro1.iwamatsu]

Hi all,

> -----Original Message-----
> From: Pavel Machek <pavel@denx.de>
> Sent: Wednesday, August 3, 2022 1:57 AM
> To: Biju Das <biju.das.jz@bp.renesas.com>
> Cc: Pavel Machek <pavel@denx.de>; iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ
> ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>; Lad Prabhakar
> <prabhakar.mahadev-lad.rj@bp.renesas.com>; cip-dev@lists.cip-project.org
> Subject: Re: [PATCH 5.10.y-cip 00/24] Add RZ/{G2LC, V2L} support
> 
> Hi!
> 
> > This patch series aims to add Basic board support for SMARC EVK based
> > on RZ/G2LC and RZ/V2L SoC. RZ/{G2L, G2LC, V2L} share the same SMARC
> > EVK board, but SoM is different and pin mapping of SoM module is
> > different.
> >
> > All these patches are cherry-picked from the mainline.
> 
> Series looks okay to me. I can apply it if there are no other commands (and if it
> passes testing).
> 

I reviewed this series, LGTM.
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>

Pavel, please push to git.kernel.org.

Best regards,
  Nobuhiro

Re: [PATCH 5.10.y-cip 00/24] Add RZ/{G2LC, V2L} support

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1260 bytes --]

Hi!

> > From: Pavel Machek <pavel@denx.de>
> > Sent: Wednesday, August 3, 2022 1:57 AM
> > To: Biju Das <biju.das.jz@bp.renesas.com>
> > Cc: Pavel Machek <pavel@denx.de>; iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ
> > ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>; Lad Prabhakar
> > <prabhakar.mahadev-lad.rj@bp.renesas.com>; cip-dev@lists.cip-project.org
> > Subject: Re: [PATCH 5.10.y-cip 00/24] Add RZ/{G2LC, V2L} support
> > 
> > Hi!
> > 
> > > This patch series aims to add Basic board support for SMARC EVK based
> > > on RZ/G2LC and RZ/V2L SoC. RZ/{G2L, G2LC, V2L} share the same SMARC
> > > EVK board, but SoM is different and pin mapping of SoM module is
> > > different.
> > >
> > > All these patches are cherry-picked from the mainline.
> > 
> > Series looks okay to me. I can apply it if there are no other commands (and if it
> > passes testing).
> > 
> 
> I reviewed this series, LGTM.
> Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
> 
> Pavel, please push to git.kernel.org.

Done, thank you for the review.

Best regards,
								Pavel

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 5.10.y-cip 10/24] clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoC

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 802 bytes --]

Hi!

> > If you enable CONFIG_CLK_R9A07G044, you get g044 support but not g054
> > support.
> > 
> > If you enable CONFIG_CLK_R9A07G054, you get both g044 and g054 support,
> > you can't disable g044.
> 
> This is not true, we can disable g044 still. see rzg2l_cpg.c, there is a guard
> for CONFIG_CLK_R9A07G044.
> 
> In this case,We will get unused variable warning for r9a07g044_cpg_info.
> 
> > 
> > This is quite strange, but probably not a problem. For symmetry, I'd not
> > mind conditional compilation of g044 parts; 
> 
> OK, will send patch for adding guard for r9a07g044_cpg_info.

Thank you.

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]