All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stafford Horne <shorne@gmail.com>
To: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Peter Maydell <peter.maydell@linaro.org>,
	openrisc@lists.librecores.org, qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH 2/7] target/openrisc: add shutdown logic
Date: Thu, 28 Apr 2022 20:47:58 +0900	[thread overview]
Message-ID: <Ymp+7vYQvA0Wr4sl@antec> (raw)
In-Reply-To: <Ymp3owBiSQIimgSy@zx2c4.com>

On Thu, Apr 28, 2022 at 01:16:51PM +0200, Jason A. Donenfeld wrote:
> Hey again,
> 
> On Thu, Apr 28, 2022 at 02:04:29AM +0200, Jason A. Donenfeld wrote:
> > By the way, would this also help the reboot case? That's
> > `reboot(RB_AUTOBOOT);`, which does:
> > 
> > machine_restart() ->
> >   do_kernel_restart() ->
> >     atomic_notifier_chain_register(&restart_handler_list, nb) ->
> >       ???
> > 
> > As far as I can tell, nothing is wired into the reboot case for
> > OpenRISC. Is this something that could be fixed in the kernel without
> > having to patch QEMU? If so, then I could effectively get shutdown for
> > my CI with the -no-reboot option, which is what I'm already doing for a
> > few platforms.
> 
> I added 13 for this: https://lists.librecores.org/pipermail/openrisc/2022-April/003884.html
> 
> When you go add these nops to the specification, please remember to add
> one for reboot too. Then, once that kernel code is merged and the
> specification published, it'll be sensible to add shutdown and reboot
> support to QEMU, per Peter's description.

This sounds fair.

-Stafford


WARNING: multiple messages have this Message-ID (diff)
From: Stafford Horne <shorne@gmail.com>
To: openrisc@lists.librecores.org
Subject: [OpenRISC] [Qemu-devel] [PATCH 2/7] target/openrisc: add shutdown logic
Date: Thu, 28 Apr 2022 20:47:58 +0900	[thread overview]
Message-ID: <Ymp+7vYQvA0Wr4sl@antec> (raw)
In-Reply-To: <Ymp3owBiSQIimgSy@zx2c4.com>

On Thu, Apr 28, 2022 at 01:16:51PM +0200, Jason A. Donenfeld wrote:
> Hey again,
> 
> On Thu, Apr 28, 2022 at 02:04:29AM +0200, Jason A. Donenfeld wrote:
> > By the way, would this also help the reboot case? That's
> > `reboot(RB_AUTOBOOT);`, which does:
> > 
> > machine_restart() ->
> >   do_kernel_restart() ->
> >     atomic_notifier_chain_register(&restart_handler_list, nb) ->
> >       ???
> > 
> > As far as I can tell, nothing is wired into the reboot case for
> > OpenRISC. Is this something that could be fixed in the kernel without
> > having to patch QEMU? If so, then I could effectively get shutdown for
> > my CI with the -no-reboot option, which is what I'm already doing for a
> > few platforms.
> 
> I added 13 for this: https://lists.librecores.org/pipermail/openrisc/2022-April/003884.html
> 
> When you go add these nops to the specification, please remember to add
> one for reboot too. Then, once that kernel code is merged and the
> specification published, it'll be sensible to add shutdown and reboot
> support to QEMU, per Peter's description.

This sounds fair.

-Stafford

  reply	other threads:[~2022-04-28 11:59 UTC|newest]

Thread overview: 69+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-16 23:23 [Qemu-devel] [PATCH 0/7] Openrisc misc features / fixes Stafford Horne
2017-04-16 23:23 ` [OpenRISC] " Stafford Horne
2017-04-16 23:23 ` [Qemu-devel] [PATCH 1/7] target/openrisc: Fixes for memory debugging Stafford Horne
2017-04-16 23:23   ` [OpenRISC] " Stafford Horne
2017-04-18  7:47   ` [Qemu-devel] " Richard Henderson
2017-04-18  7:47     ` [OpenRISC] " Richard Henderson
2017-04-18 14:18     ` Stafford Horne
2017-04-18 14:18       ` [OpenRISC] " Stafford Horne
2017-04-18 15:00       ` Richard Henderson
2017-04-18 15:00         ` [OpenRISC] " Richard Henderson
2017-04-19 20:06         ` Stafford Horne
2017-04-19 20:06           ` [OpenRISC] " Stafford Horne
2017-04-16 23:23 ` [Qemu-devel] [PATCH 2/7] target/openrisc: add shutdown logic Stafford Horne
2017-04-16 23:23   ` [OpenRISC] " Stafford Horne
2017-04-18  7:52   ` [Qemu-devel] " Richard Henderson
2017-04-18  7:52     ` [OpenRISC] " Richard Henderson
2017-04-18 14:20     ` Stafford Horne
2017-04-18 14:20       ` [OpenRISC] " Stafford Horne
2017-04-22 10:09       ` Stafford Horne
2017-04-22 10:09         ` [OpenRISC] " Stafford Horne
2017-04-22 15:25         ` Richard Henderson
2017-04-22 15:25           ` [OpenRISC] " Richard Henderson
2017-04-23 21:28           ` [OpenRISC] [PATCH PMR] target/openrisc: Support non-busy idle state using PMR SPR Stafford Horne
2017-04-23 21:54           ` [Qemu-devel] [PATCH RFC] " Stafford Horne
2017-04-23 21:54             ` [OpenRISC] " Stafford Horne
2017-04-25 10:11             ` [Qemu-devel] " Richard Henderson
2017-04-25 10:11               ` [OpenRISC] " Richard Henderson
2017-04-25 14:10               ` [Qemu-devel] [PATCH RFC v2] " Stafford Horne
2017-04-25 14:10                 ` [OpenRISC] " Stafford Horne
2017-04-25 14:18               ` [Qemu-devel] [PATCH RFC] " Stafford Horne
2017-04-25 14:18                 ` [OpenRISC] " Stafford Horne
2017-04-25 14:51                 ` [Qemu-devel] " Richard Henderson
2017-04-25 14:51                   ` [OpenRISC] " Richard Henderson
2022-04-27 17:44   ` [Qemu-devel] [PATCH 2/7] target/openrisc: add shutdown logic Jason A. Donenfeld
2022-04-27 17:44     ` [OpenRISC] " Jason A. Donenfeld
2022-04-27 18:47     ` Peter Maydell
2022-04-27 18:47       ` [OpenRISC] " Peter Maydell
2022-04-27 21:48       ` Stafford Horne
2022-04-27 21:48         ` [OpenRISC] " Stafford Horne
2022-04-28  0:04         ` Jason A. Donenfeld
2022-04-28  0:04           ` [OpenRISC] " Jason A. Donenfeld
2022-04-28 11:16           ` Jason A. Donenfeld
2022-04-28 11:16             ` [OpenRISC] " Jason A. Donenfeld
2022-04-28 11:47             ` Stafford Horne [this message]
2022-04-28 11:47               ` Stafford Horne
2022-04-28  9:19         ` Peter Maydell
2022-04-28  9:19           ` [OpenRISC] " Peter Maydell
2017-04-16 23:23 ` [Qemu-devel] [PATCH 3/7] target/openrisc: add numcores and coreid support Stafford Horne
2017-04-16 23:23   ` [OpenRISC] " Stafford Horne
2017-04-18  8:01   ` [Qemu-devel] " Richard Henderson
2017-04-18  8:01     ` [OpenRISC] " Richard Henderson
2017-04-16 23:23 ` [Qemu-devel] [PATCH 4/7] target/openrisc: implement shadow registers Stafford Horne
2017-04-16 23:23   ` [OpenRISC] " Stafford Horne
2017-04-18  8:11   ` [Qemu-devel] " Richard Henderson
2017-04-18  8:11     ` [OpenRISC] " Richard Henderson
2017-04-18 14:26     ` Stafford Horne
2017-04-18 14:26       ` [OpenRISC] " Stafford Horne
2017-04-16 23:23 ` [Qemu-devel] [PATCH 5/7] migration: Add VMSTATE_UINTTL_2DARRAY() Stafford Horne
2017-04-16 23:23   ` [OpenRISC] " Stafford Horne
2017-04-16 23:23 ` [Qemu-devel] [PATCH 6/7] migration: Add VMSTATE_STRUCT_2DARRAY() Stafford Horne
2017-04-16 23:23   ` [OpenRISC] " Stafford Horne
2017-04-16 23:23 ` [Qemu-devel] [PATCH 7/7] target/openrisc: Implement full vmstate serialization Stafford Horne
2017-04-16 23:23   ` [OpenRISC] " Stafford Horne
2017-04-18  8:14   ` [Qemu-devel] " Richard Henderson
2017-04-18  8:14     ` [OpenRISC] " Richard Henderson
2017-04-18 14:27     ` Stafford Horne
2017-04-18 14:27       ` [OpenRISC] " Stafford Horne
2017-04-16 23:33 ` [Qemu-devel] [PATCH 0/7] Openrisc misc features / fixes no-reply
2017-04-16 23:33   ` [OpenRISC] " no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Ymp+7vYQvA0Wr4sl@antec \
    --to=shorne@gmail.com \
    --cc=Jason@zx2c4.com \
    --cc=openrisc@lists.librecores.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.