From: Meelis Roos <mroos@linux.ee>
To: Linux Kernel list <linux-kernel@vger.kernel.org>,
x86@kernel.org, linux-edac@vger.kernel.org
Subject: 4.15-rc6 PTI regression: L1 TLB mismatch MCE on Athlon64
Date: Tue, 2 Jan 2018 22:49:16 +0200 (EET) [thread overview]
Message-ID: <alpine.LRH.2.21.1801022214390.25029@math.ut.ee> (raw)
This is on a socket 939 Athlon64 3500+, with PTI enabled.
[ 316.384669] mce: [Hardware Error]: Machine check events logged
[ 316.384698] [Hardware Error]: Corrected error, no action required.
[ 316.384719] [Hardware Error]: CPU:0 (f:2f:2) MC1_STATUS[-|CE|-|-|AddrV]: 0x9400000000010011
[ 316.384742] [Hardware Error]: Error Addr: 0x0000ffff81e000e0
[ 316.384757] [Hardware Error]: MC1 Error: L1 TLB multimatch.
[ 316.384774] [Hardware Error]: cache level: L1, tx: INSN
These MCE-s do not happen on 4.14 and 4.15.0-rc4-00041-gace52288edf0.
They do happen on each boot into 4.15-rc6. Will try to bisect.
I understand there exist patches that turn off PTI on AMD CPUs but the
MCE-s seem still interesting.
Same kernel with "nopti" boot command line option does not show the
MCE-s either.
When the MCE-s happen, they happen with 5 minute interval or slightly
more, like this (excerpt from grep mce: /var/log/kern.log, not full
dmesg). The first ones always happen at 316 and 627 seconds after
bootup.
Jan 2 19:39:52 vanavaarikas2 kernel: [ 316.384170] mce: [Hardware Error]: Machine check events logged
Jan 2 19:45:03 vanavaarikas2 kernel: [ 627.680086] mce: [Hardware Error]: Machine check events logged
Jan 2 19:50:14 vanavaarikas2 kernel: [ 938.976079] mce: [Hardware Error]: Machine check events logged
Jan 2 19:55:25 vanavaarikas2 kernel: [ 1250.272080] mce: [Hardware Error]: Machine check events logged
Jan 2 20:00:37 vanavaarikas2 kernel: [ 1561.568073] mce: [Hardware Error]: Machine check events logged
Jan 2 20:05:48 vanavaarikas2 kernel: [ 1872.864075] mce: [Hardware Error]: Machine check events logged
Jan 2 20:10:59 vanavaarikas2 kernel: [ 2184.160072] mce: [Hardware Error]: Machine check events logged
Jan 2 20:16:11 vanavaarikas2 kernel: [ 2495.456072] mce: [Hardware Error]: Machine check events logged
Jan 2 20:21:22 vanavaarikas2 kernel: [ 2806.752073] mce: [Hardware Error]: Machine check events logged
Jan 2 20:26:33 vanavaarikas2 kernel: [ 3118.048072] mce: [Hardware Error]: Machine check events logged
Jan 2 20:31:45 vanavaarikas2 kernel: [ 3429.344085] mce: [Hardware Error]: Machine check events logged
Jan 2 20:36:56 vanavaarikas2 kernel: [ 3740.640083] mce: [Hardware Error]: Machine check events logged
Jan 2 20:42:07 vanavaarikas2 kernel: [ 4051.936080] mce: [Hardware Error]: Machine check events logged
Jan 2 20:47:18 vanavaarikas2 kernel: [ 4363.232075] mce: [Hardware Error]: Machine check events logged
Jan 2 20:52:30 vanavaarikas2 kernel: [ 4674.528075] mce: [Hardware Error]: Machine check events logged
Jan 2 20:57:41 vanavaarikas2 kernel: [ 4985.824076] mce: [Hardware Error]: Machine check events logged
Jan 2 21:02:52 vanavaarikas2 kernel: [ 5297.120073] mce: [Hardware Error]: Machine check events logged
$ cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 47
model name : AMD Athlon(tm) 64 Processor 3500+
stepping : 2
cpu MHz : 1000.000
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow rep_good nopl cpuid extd_apicid pni lahf_lm 3dnowprefetch pti vmmcall
bugs : fxsave_leak sysret_ss_attrs null_seg swapgs_fence cpu_insecure
bogomips : 2000.05
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc
Full dmesg:
[ 0.000000] Linux version 4.15.0-rc6 (mroos@vanavaarikas2) (gcc version 7.2.0 (Debian 7.2.0-18)) #44 Tue Jan 2 18:56:10 EET 2018
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-rc6 root=/dev/sda1 ro
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000aafaffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aafb0000-0x00000000aafbffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000aafc0000-0x00000000aafeffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000aaff0000-0x00000000aaffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff7c0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: 939Dual-SATA2/939Dual-SATA2, BIOS P2.30 09/25/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: pci 0000:00:04:00: AGP bridge
[ 0.000000] AGP: pci 0000:00:04.0: AGP aperture [bus addr 0xd0000000-0xd1ffffff] (old size 32MB)
[ 0.000000] AGP: pci 0000:00:04.0: AGP aperture size 4096MB (APSIZE 0x0) is not right, using settings from NB
[ 0.000000] AGP: pci 0000:00:04.0: AGP aperture [bus addr 0xd0000000-0xd1ffffff] (32MB, APSIZE 0x0)
[ 0.000000] e820: last_pfn = 0xaafb0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFE0000000 write-back
[ 0.000000] 2 base 00A0000000 mask FFF8000000 write-back
[ 0.000000] 3 base 00A8000000 mask FFFE000000 write-back
[ 0.000000] 4 base 00AA000000 mask FFFF000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576
[ 0.000000] BRK [0x034a7000, 0x034a7fff] PGTABLE
[ 0.000000] BRK [0x034a8000, 0x034a8fff] PGTABLE
[ 0.000000] BRK [0x034a9000, 0x034a9fff] PGTABLE
[ 0.000000] BRK [0x034aa000, 0x034aafff] PGTABLE
[ 0.000000] BRK [0x034ab000, 0x034abfff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F9A50 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x00000000AAFB0000 000034 (v01 A M I OEMRSDT 09000625 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000AAFB0200 000084 (v02 A M I OEMFACP 09000625 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x00000000AAFB0440 00474D (v01 939M2 939M2222 00000222 INTL 02002026)
[ 0.000000] ACPI: FACS 0x00000000AAFC0000 000040
[ 0.000000] ACPI: APIC 0x00000000AAFB0390 000068 (v01 A M I OEMAPIC 09000625 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000AAFB0400 00003C (v01 A M I OEMMCFG 09000625 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000AAFC0040 000057 (v01 A M I AMI_OEM 09000625 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000aafaffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000aafaffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000aafaffff]
[ 0.000000] On node 0 totalpages: 700238
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10879 pages used for memmap
[ 0.000000] DMA32 zone: 696240 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 2, version 17, address 0xfec10000, GSI 24-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
[ 0.000000] e820: [mem 0xab000000-0xff7bffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 689274
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-rc6 root=/dev/sda1 ro
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: pci 0000:00:04:00: AGP bridge
[ 0.000000] AGP: pci 0000:00:04.0: AGP aperture [bus addr 0xd0000000-0xd1ffffff] (old size 32MB)
[ 0.000000] AGP: pci 0000:00:04.0: AGP aperture size 4096MB (APSIZE 0x0) is not right, using settings from NB
[ 0.000000] AGP: pci 0000:00:04.0: AGP aperture [bus addr 0xd0000000-0xd1ffffff] (32MB, APSIZE 0x0)
[ 0.000000] AGP: Node 0: aperture [bus addr 0xd0000000-0xdfffffff] (256MB)
[ 0.000000] Memory: 2711912K/2800952K available (16396K kernel code, 10597K rwdata, 2124K rodata, 844K init, 512K bss, 89040K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] NR_IRQS: 4352, nr_irqs: 256, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 2200.064 MHz processor
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.12 BogoMIPS (lpj=8800256)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.024000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.024000] mce: CPU supports 5 MCE banks
[ 0.024000] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.024000] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.024000] CPU: AMD Athlon(tm) 64 Processor 3500+ (family: 0xf, model: 0x2f, stepping: 0x2)
[ 0.024000] Performance Events: AMD PMU driver.
[ 0.024000] ... version: 0
[ 0.024000] ... bit width: 48
[ 0.024000] ... generic registers: 4
[ 0.024000] ... value mask: 0000ffffffffffff
[ 0.024000] ... max period: 00007fffffffffff
[ 0.024000] ... fixed-purpose events: 0
[ 0.024000] ... event mask: 000000000000000f
[ 0.024000] MCE: In-kernel MCE decoding enabled.
[ 0.028000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.028000] devtmpfs: initialized
[ 0.028000] PM: Registering ACPI NVS region [mem 0xaafc0000-0xaafeffff] (196608 bytes)
[ 0.028000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.028000] futex hash table entries: 256 (order: 0, 6144 bytes)
[ 0.028000] NET: Registered protocol family 16
[ 0.028000] cpuidle: using governor ladder
[ 0.028000] cpuidle: using governor menu
[ 0.028000] node 0 link 0: io port [1000, ffffff]
[ 0.028000] TOM: 00000000ab000000 aka 2736M
[ 0.028000] node 0 link 0: mmio [e0000000, efffffff]
[ 0.028000] node 0 link 0: mmio [a0000, bffff]
[ 0.028000] node 0 link 0: mmio [ab000000, ffffffff]
[ 0.028000] bus: [bus 00-ff] on node 0 link 0
[ 0.028000] bus: 00 [io 0x0000-0xffff]
[ 0.028000] bus: 00 [mem 0xab000000-0xfcffffffff]
[ 0.028000] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.028000] ACPI: bus type PCI registered
[ 0.028000] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.028000] PCI: not using MMCONFIG
[ 0.028000] PCI: Using configuration type 1 for base access
[ 0.033379] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.033700] ACPI: Added _OSI(Module Device)
[ 0.033794] ACPI: Added _OSI(Processor Device)
[ 0.033889] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.033984] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.034306] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.037167] ACPI: Interpreter enabled
[ 0.037286] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.037380] ACPI: Using IOAPIC for interrupt routing
[ 0.037567] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.038457] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.038642] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.039116] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.047263] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.047371] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.047532] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.047703] acpi PNP0A03:00: ignoring host bridge window [mem 0x000d0000-0x000dffff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d0fff])
[ 0.047907] PCI host bridge to bus 0000:00
[ 0.048006] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.048107] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.048208] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.048363] pci_bus 0000:00: root bus resource [mem 0xab000000-0xffffffff window]
[ 0.048518] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.048628] pci 0000:00:00.0: [10b9:1695] type 00 class 0x060000
[ 0.048761] pci 0000:00:01.0: [10b9:524b] type 01 class 0x060400
[ 0.048780] pci 0000:00:01.0: enabling Extended Tags
[ 0.048901] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.048998] pci 0000:00:02.0: [10b9:524c] type 01 class 0x060400
[ 0.049016] pci 0000:00:02.0: enabling Extended Tags
[ 0.049135] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.049231] pci 0000:00:04.0: [10b9:1689] type 00 class 0x060000
[ 0.049246] pci 0000:00:04.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.049373] pci 0000:00:05.0: [10b9:5246] type 01 class 0x060400
[ 0.049484] pci 0000:00:06.0: [10b9:5249] type 01 class 0x060401
[ 0.049606] pci 0000:00:07.0: [10b9:1563] type 00 class 0x060100
[ 0.049743] pci 0000:00:07.1: [10b9:7101] type 00 class 0x068000
[ 0.049789] pci 0000:00:07.1: quirk: [io 0x0800-0x083f] claimed by ali7101 ACPI
[ 0.050036] pci 0000:00:08.0: [10b9:5455] type 00 class 0x040100
[ 0.050052] pci 0000:00:08.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.050060] pci 0000:00:08.0: reg 0x14: [mem 0xfebff000-0xfebfffff]
[ 0.050114] pci 0000:00:08.0: supports D1 D2
[ 0.050115] pci 0000:00:08.0: PME# supported from D2 D3hot D3cold
[ 0.050208] pci 0000:00:12.0: [10b9:5229] type 00 class 0x01018a
[ 0.050235] pci 0000:00:12.0: reg 0x20: [io 0xff00-0xff0f]
[ 0.050247] pci 0000:00:12.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.050349] pci 0000:00:12.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.050449] pci 0000:00:12.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.050549] pci 0000:00:12.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.050734] pci 0000:00:12.1: [10b9:5289] type 00 class 0x01018f
[ 0.050745] pci 0000:00:12.1: reg 0x10: [io 0xec00-0xec07]
[ 0.050751] pci 0000:00:12.1: reg 0x14: [io 0xe480-0xe483]
[ 0.050757] pci 0000:00:12.1: reg 0x18: [io 0xe400-0xe407]
[ 0.050762] pci 0000:00:12.1: reg 0x1c: [io 0xe080-0xe083]
[ 0.050768] pci 0000:00:12.1: reg 0x20: [io 0xe000-0xe00f]
[ 0.050868] pci 0000:00:13.0: [10b9:5237] type 00 class 0x0c0310
[ 0.050880] pci 0000:00:13.0: reg 0x10: [mem 0xfebfe000-0xfebfefff]
[ 0.050992] pci 0000:00:13.1: [10b9:5237] type 00 class 0x0c0310
[ 0.051003] pci 0000:00:13.1: reg 0x10: [mem 0xfebfd000-0xfebfdfff]
[ 0.051115] pci 0000:00:13.2: [10b9:5237] type 00 class 0x0c0310
[ 0.051126] pci 0000:00:13.2: reg 0x10: [mem 0xfebfc000-0xfebfcfff]
[ 0.051241] pci 0000:00:13.3: [10b9:5239] type 00 class 0x0c0320
[ 0.051254] pci 0000:00:13.3: reg 0x10: [mem 0xfebfbc00-0xfebfbcff]
[ 0.051300] pci 0000:00:13.3: PME# supported from D0 D3hot D3cold
[ 0.051387] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.051472] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.051554] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.051637] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.051757] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.051856] pci 0000:00:01.0: bridge window [mem 0xfa300000-0xfa3fffff]
[ 0.051890] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.051989] pci 0000:00:02.0: bridge window [mem 0xfa400000-0xfa4fffff]
[ 0.052036] pci 0000:03:00.0: [10de:0322] type 00 class 0x030000
[ 0.052051] pci 0000:03:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
[ 0.052058] pci 0000:03:00.0: reg 0x14: [mem 0xb0000000-0xb7ffffff pref]
[ 0.052084] pci 0000:03:00.0: reg 0x30: [mem 0xfc5e0000-0xfc5fffff pref]
[ 0.052167] pci 0000:00:05.0: PCI bridge to [bus 03]
[ 0.052268] pci 0000:00:05.0: bridge window [mem 0xfa500000-0xfc5fffff]
[ 0.052271] pci 0000:00:05.0: bridge window [mem 0xabf00000-0xbbefffff pref]
[ 0.052310] pci 0000:04:05.0: [10de:002d] type 00 class 0x030000
[ 0.052325] pci 0000:04:05.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.052331] pci 0000:04:05.0: reg 0x14: [mem 0xbc000000-0xbdffffff pref]
[ 0.052353] pci 0000:04:05.0: reg 0x30: [mem 0xfeaf0000-0xfeafffff pref]
[ 0.052415] pci 0000:04:06.0: [1000:000c] type 00 class 0x010000
[ 0.052430] pci 0000:04:06.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.052438] pci 0000:04:06.0: reg 0x14: [mem 0xfeaefc00-0xfeaefcff]
[ 0.052445] pci 0000:04:06.0: reg 0x18: [mem 0xfeaee000-0xfeaeefff]
[ 0.052471] pci 0000:04:06.0: reg 0x30: [mem 0xfead0000-0xfeadffff pref]
[ 0.052523] pci 0000:04:07.0: [8086:1229] type 00 class 0x020000
[ 0.052539] pci 0000:04:07.0: reg 0x10: [mem 0xfeaed000-0xfeaedfff]
[ 0.052546] pci 0000:04:07.0: reg 0x14: [io 0xdc00-0xdc3f]
[ 0.052554] pci 0000:04:07.0: reg 0x18: [mem 0xfe900000-0xfe9fffff]
[ 0.052578] pci 0000:04:07.0: reg 0x30: [mem 0xfe800000-0xfe8fffff pref]
[ 0.052603] pci 0000:04:07.0: supports D1 D2
[ 0.052604] pci 0000:04:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.052664] pci 0000:00:06.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.052767] pci 0000:00:06.0: bridge window [io 0xb000-0xdfff]
[ 0.052771] pci 0000:00:06.0: bridge window [mem 0xfc600000-0xfeafffff]
[ 0.052774] pci 0000:00:06.0: bridge window [mem 0xbbf00000-0xbfefffff pref]
[ 0.052776] pci 0000:00:06.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.052778] pci 0000:00:06.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.052780] pci 0000:00:06.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.052782] pci 0000:00:06.0: bridge window [mem 0xab000000-0xffffffff window] (subtractive decode)
[ 0.052796] pci_bus 0000:00: on NUMA node 0
[ 0.053706] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.053918] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.054129] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.054339] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.054549] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.054764] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.054974] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.055185] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
[ 0.055449] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.058310] pci 0000:03:00.0: vgaarb: setting as boot VGA device
[ 0.058416] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.058576] pci 0000:04:05.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.058733] pci 0000:04:05.0: vgaarb: bridge control possible
[ 0.058830] pci 0000:03:00.0: vgaarb: bridge control possible
[ 0.058928] vgaarb: loaded
[ 0.059120] SCSI subsystem initialized
[ 0.059339] libata version 3.00 loaded.
[ 0.059344] ACPI: bus type USB registered
[ 0.060035] usbcore: registered new interface driver usbfs
[ 0.060145] usbcore: registered new interface driver hub
[ 0.060255] usbcore: registered new device driver usb
[ 0.060385] EDAC MC: Ver: 3.0.0
[ 0.060901] PCI: Using ACPI for IRQ routing
[ 0.068466] PCI: pci_cache_line_size set to 64 bytes
[ 0.068513] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.068515] e820: reserve RAM buffer [mem 0xaafb0000-0xabffffff]
[ 0.068898] clocksource: Switched to clocksource refined-jiffies
[ 0.069077] pnp: PnP ACPI init
[ 0.069259] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.069659] pnp 00:01: [dma 2]
[ 0.069713] pnp 00:01: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.070038] pnp 00:02: [dma 3]
[ 0.070161] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.070366] pnp 00:03: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.070595] pnp 00:04: Plug and Play ACPI device, IDs PNPb006 (active)
[ 0.070733] system 00:05: [io 0x0480-0x048f] has been reserved
[ 0.070833] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.070932] system 00:05: [io 0x0800-0x087f] could not be reserved
[ 0.071031] system 00:05: [io 0x0400-0x040f] has been reserved
[ 0.071137] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.071225] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.071326] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.071426] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.071527] system 00:06: [mem 0xfec10000-0xfec10fff] could not be reserved
[ 0.071627] system 00:06: [mem 0xffb00000-0xffffffff] has been reserved
[ 0.071733] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.071998] pnp 00:07: [dma 0 disabled]
[ 0.072075] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.072168] system 00:08: [io 0x0290-0x029f] has been reserved
[ 0.072272] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.072465] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.072567] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.072668] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.072769] system 00:09: [mem 0x00100000-0xaaffffff] could not be reserved
[ 0.072875] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.073049] pnp: PnP ACPI: found 10 devices
[ 0.081330] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.081495] clocksource: Switched to clocksource acpi_pm
[ 0.081626] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.081726] pci 0000:00:01.0: bridge window [mem 0xfa300000-0xfa3fffff]
[ 0.081828] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.081925] pci 0000:00:02.0: bridge window [mem 0xfa400000-0xfa4fffff]
[ 0.082028] pci 0000:00:05.0: PCI bridge to [bus 03]
[ 0.082127] pci 0000:00:05.0: bridge window [mem 0xfa500000-0xfc5fffff]
[ 0.082228] pci 0000:00:05.0: bridge window [mem 0xabf00000-0xbbefffff pref]
[ 0.082387] pci 0000:00:06.0: PCI bridge to [bus 04]
[ 0.082484] pci 0000:00:06.0: bridge window [io 0xb000-0xdfff]
[ 0.082585] pci 0000:00:06.0: bridge window [mem 0xfc600000-0xfeafffff]
[ 0.082686] pci 0000:00:06.0: bridge window [mem 0xbbf00000-0xbfefffff pref]
[ 0.082848] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.082849] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.082851] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.082853] pci_bus 0000:00: resource 7 [mem 0xab000000-0xffffffff window]
[ 0.082855] pci_bus 0000:01: resource 1 [mem 0xfa300000-0xfa3fffff]
[ 0.082857] pci_bus 0000:02: resource 1 [mem 0xfa400000-0xfa4fffff]
[ 0.082859] pci_bus 0000:03: resource 1 [mem 0xfa500000-0xfc5fffff]
[ 0.082861] pci_bus 0000:03: resource 2 [mem 0xabf00000-0xbbefffff pref]
[ 0.082863] pci_bus 0000:04: resource 0 [io 0xb000-0xdfff]
[ 0.082865] pci_bus 0000:04: resource 1 [mem 0xfc600000-0xfeafffff]
[ 0.082866] pci_bus 0000:04: resource 2 [mem 0xbbf00000-0xbfefffff pref]
[ 0.082868] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.082870] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.082872] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.082873] pci_bus 0000:04: resource 7 [mem 0xab000000-0xffffffff window]
[ 0.082968] NET: Registered protocol family 2
[ 0.083226] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.083543] TCP bind hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.083782] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.083993] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.083993] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.083993] NET: Registered protocol family 1
[ 0.083993] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 0.084037] pci 0000:00:01.0: Enabling HT MSI Mapping
[ 0.084147] pci 0000:00:02.0: Enabling HT MSI Mapping
[ 0.324160] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.324334] pci 0000:04:07.0: Firmware left e100 interrupts enabled; disabling
[ 0.324490] PCI: CLS 64 bytes, default 64
[ 0.324543] agpgart-amd64 0000:00:04.0: AGP bridge [10b9/1689]
[ 0.324645] agpgart-amd64 0000:00:04.0: aperture size 4096 MB is not right, using settings from NB
[ 0.324804] agpgart-amd64 0000:00:04.0: setting up ULi AGP
[ 0.331838] agpgart-amd64 0000:00:04.0: AGP aperture is 256M @ 0xd0000000
[ 0.332198] Scanning for low memory corruption every 60 seconds
[ 0.332750] Initialise system trusted keyrings
[ 0.333078] workingset: timestamp_bits=62 max_order=20 bucket_order=0
[ 0.338100] Key type asymmetric registered
[ 0.338202] Asymmetric key parser 'x509' registered
[ 0.338348] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.338503] io scheduler noop registered
[ 0.338657] io scheduler cfq registered (default)
[ 0.339224] vga16fb: initializing
[ 0.339227] vga16fb: mapped to 0x00000000675d8d8d
[ 0.514324] Console: switching to colour frame buffer device 80x30
[ 0.522913] fb0: VGA16 VGA frame buffer device
[ 0.523261] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.523666] ACPI: Power Button [PWRB]
[ 0.523925] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.543327] ACPI: Power Button [PWRF]
[ 0.553547] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.584199] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.606023] Non-volatile memory driver v1.3
[ 0.616806] Linux agpgart interface v0.103
[ 0.627064] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 0.647817] checking generic (a0000 10000) vs hw (b0000000 8000000)
[ 0.647818] fb: switching to nouveaufb from VGA16 VGA
[ 0.680912] Console: switching to colour VGA+ 80x25
[ 0.681508] nouveau 0000:03:00.0: NVIDIA NV34 (034200a2)
[ 0.781398] nouveau 0000:03:00.0: bios: version 04.34.20.18.00
[ 0.781939] agpgart-amd64 0000:00:04.0: AGP 3.0 bridge
[ 0.782048] agpgart: swapper tried to set rate=x12. Setting to AGP3 x8 mode.
[ 0.782162] agpgart-amd64 0000:00:04.0: putting AGP V3 device into 8x mode
[ 0.782281] nouveau 0000:03:00.0: putting AGP V3 device into 8x mode
[ 0.782518] agpgart-amd64 0000:00:04.0: AGP 3.0 bridge
[ 0.782618] agpgart: swapper tried to set rate=x12. Setting to AGP3 x8 mode.
[ 0.782731] agpgart-amd64 0000:00:04.0: putting AGP V3 device into 8x mode
[ 0.782848] nouveau 0000:03:00.0: putting AGP V3 device into 8x mode
[ 0.782980] nouveau 0000:03:00.0: tmr: unknown input clock freq
[ 0.783804] nouveau 0000:03:00.0: fb: 128 MiB DDR1
[ 0.786516] [TTM] Zone kernel: Available graphics memory: 1355956 kiB
[ 0.786611] [TTM] Initializing pool allocator
[ 0.786705] [TTM] Initializing DMA pool allocator
[ 0.786816] nouveau 0000:03:00.0: DRM: VRAM: 127 MiB
[ 0.786908] nouveau 0000:03:00.0: DRM: GART: 256 MiB
[ 0.787001] nouveau 0000:03:00.0: DRM: BMP version 5.38
[ 0.787095] nouveau 0000:03:00.0: DRM: DCB version 2.2
[ 0.787188] nouveau 0000:03:00.0: DRM: DCB outp 00: 01000300 000088b8
[ 0.787284] nouveau 0000:03:00.0: DRM: DCB outp 01: 02010310 000088b8
[ 0.787379] nouveau 0000:03:00.0: DRM: DCB outp 02: 01010312 00000000
[ 0.787475] nouveau 0000:03:00.0: DRM: DCB outp 03: 02020321 00000033
[ 0.787764] nouveau 0000:03:00.0: DRM: Loading NV17 power sequencing microcode
[ 0.788255] nouveau 0000:03:00.0: DRM: Saving VGA fonts
[ 0.851279] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.851376] [drm] Driver supports precise vblank timestamp query.
[ 0.854466] nouveau 0000:03:00.0: DRM: MM: using M2MF for buffer copies
[ 0.854575] nouveau 0000:03:00.0: DRM: Setting dpms mode 3 on TV encoder (output 3)
[ 0.972020] [drm] Cannot find any crtc or sizes
[ 0.972129] [drm] Initialized nouveau 1.3.1 20120801 for 0000:03:00.0 on minor 0
[ 0.972312] nouveau 0000:04:05.0: enabling device (0000 -> 0002)
[ 0.972631] nouveau 0000:04:05.0: NVIDIA NV05 (20154000)
[ 1.009207] nouveau 0000:04:05.0: bios: version 03.05.00.10.00
[ 1.009303] nouveau 0000:04:05.0: bios: DCB table not found
[ 1.009434] nouveau 0000:04:05.0: bios: DCB table not found
[ 1.009547] nouveau 0000:04:05.0: bios: DCB table not found
[ 1.009641] nouveau 0000:04:05.0: bios: DCB table not found
[ 1.128019] [drm] Cannot find any crtc or sizes
[ 1.224139] nouveau 0000:04:05.0: tmr: unknown input clock freq
[ 1.225602] nouveau 0000:04:05.0: fb: 32 MiB SDRAM
[ 1.230713] nouveau 0000:04:05.0: DRM: VRAM: 31 MiB
[ 1.230806] nouveau 0000:04:05.0: DRM: GART: 128 MiB
[ 1.230899] nouveau 0000:04:05.0: DRM: BMP version 5.17
[ 1.230992] nouveau 0000:04:05.0: DRM: No DCB data found in VBIOS
[ 1.232229] nouveau 0000:04:05.0: DRM: Adaptor not initialised, running VBIOS init tables.
[ 1.232571] nouveau 0000:04:05.0: bios: DCB table not found
[ 1.232948] nouveau 0000:04:05.0: DRM: Saving VGA fonts
[ 1.294446] nouveau 0000:04:05.0: DRM: No DCB data found in VBIOS
[ 1.295429] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.295524] [drm] Driver supports precise vblank timestamp query.
[ 1.296838] nouveau 0000:04:05.0: DRM: MM: using M2MF for buffer copies
[ 1.312032] [drm] Cannot find any crtc or sizes
[ 1.327847] nouveau 0000:04:05.0: DRM: allocated 1024x768 fb: 0x4000, bo 00000000fb8c0b42
[ 1.344019] tsc: Refined TSC clocksource calibration: 2200.077 MHz
[ 1.344024] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb67bad665, max_idle_ns: 440795248935 ns
[ 1.509927] Console: switching to colour frame buffer device 128x48
[ 1.514281] nouveau 0000:04:05.0: fb0: nouveaufb frame buffer device
[ 1.514300] [drm] Initialized nouveau 1.3.1 20120801 for 0000:04:05.0 on minor 1
[ 1.515913] loop: module loaded
[ 1.516056] sata_uli 0000:00:12.1: version 1.3
[ 1.517069] scsi host0: sata_uli
[ 1.517222] scsi host1: sata_uli
[ 1.517268] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe480 bmdma 0xe000 irq 19
[ 1.517279] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xe008 irq 19
[ 1.517325] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[ 1.517357] Fusion MPT base driver 3.04.20
[ 1.517364] Copyright (c) 1999-2008 LSI Corporation
[ 1.517376] Fusion MPT SAS Host driver 3.04.20
[ 1.517405] Fusion MPT misc device (ioctl) driver 3.04.20
[ 1.517512] mptctl: Registered with Fusion MPT base driver
[ 1.517521] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 1.517573] VFIO - User Level meta-driver version: 0.3
[ 1.517588] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.517803] ehci-pci: EHCI PCI platform driver
[ 1.518145] ehci-pci 0000:00:13.3: EHCI Host Controller
[ 1.518734] ehci-pci 0000:00:13.3: new USB bus registered, assigned bus number 1
[ 1.519602] ehci-pci 0000:00:13.3: debug port 1
[ 1.520515] ehci-pci 0000:00:13.3: irq 23, io mem 0xfebfbc00
[ 1.536012] ehci-pci 0000:00:13.3: USB 2.0 started, EHCI 1.00
[ 1.536250] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.536458] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.537254] usb usb1: Product: EHCI Host Controller
[ 1.538157] usb usb1: Manufacturer: Linux 4.15.0-rc6 ehci_hcd
[ 1.539085] usb usb1: SerialNumber: 0000:00:13.3
[ 1.540166] hub 1-0:1.0: USB hub found
[ 1.540893] hub 1-0:1.0: 8 ports detected
[ 1.541972] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.542615] ohci-pci: OHCI PCI platform driver
[ 1.543620] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.544418] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.545316] ohci-pci 0000:00:13.0: irq 20, io mem 0xfebfe000
[ 1.606049] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.606250] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.606444] usb usb2: Product: OHCI PCI host controller
[ 1.607239] usb usb2: Manufacturer: Linux 4.15.0-rc6 ohci_hcd
[ 1.608122] usb usb2: SerialNumber: 0000:00:13.0
[ 1.609144] hub 2-0:1.0: USB hub found
[ 1.609895] hub 2-0:1.0: 3 ports detected
[ 1.610952] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 1.611524] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.612392] ohci-pci 0000:00:13.1: irq 21, io mem 0xfebfd000
[ 1.674040] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.674227] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.674413] usb usb3: Product: OHCI PCI host controller
[ 1.675074] usb usb3: Manufacturer: Linux 4.15.0-rc6 ohci_hcd
[ 1.675907] usb usb3: SerialNumber: 0000:00:13.1
[ 1.676899] hub 3-0:1.0: USB hub found
[ 1.677580] hub 3-0:1.0: 3 ports detected
[ 1.678611] ohci-pci 0000:00:13.2: OHCI PCI host controller
[ 1.679161] ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.680043] ohci-pci 0000:00:13.2: irq 22, io mem 0xfebfc000
[ 1.742037] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.742236] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.742436] usb usb4: Product: OHCI PCI host controller
[ 1.743125] usb usb4: Manufacturer: Linux 4.15.0-rc6 ohci_hcd
[ 1.743977] usb usb4: SerialNumber: 0000:00:13.2
[ 1.744945] hub 4-0:1.0: USB hub found
[ 1.745633] hub 4-0:1.0: 3 ports detected
[ 1.746623] usbcore: registered new interface driver usb-storage
[ 1.747272] i8042: PNP: No PS/2 controller found.
[ 1.748088] i8042: Probing ports directly.
[ 1.751190] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.751387] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.751723] mousedev: PS/2 mouse device common for all mice
[ 1.752334] rtc_cmos 00:00: RTC can wake from S4
[ 1.753257] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 1.753779] rtc_cmos 00:00: alarms up to one month, 114 bytes nvram
[ 1.754607] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.755427] usbcore: registered new interface driver usbhid
[ 1.756240] usbhid: USB HID core driver
[ 1.757286] NET: Registered protocol family 10
[ 1.758600] Segment Routing with IPv6
[ 1.758820] NET: Registered protocol family 17
[ 1.759478] sched_clock: Marking stable (1756236416, 0)->(1841121704, -84885288)
[ 1.760408] registered taskstats version 1
[ 1.760949] Loading compiled-in X.509 certificates
[ 1.762017] console [netcon0] enabled
[ 1.762549] netconsole: network logging started
[ 1.763489] powernow_k8: fid 0xe (2200 MHz), vid 0x6
[ 1.764173] powernow_k8: fid 0xc (2000 MHz), vid 0x8
[ 1.764983] powernow_k8: fid 0xa (1800 MHz), vid 0xa
[ 1.765777] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
[ 1.766602] powernow_k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ (1 cpu cores) (version 2.20.00)
[ 1.767375] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.768188] EDD information not available.
[ 1.769026] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 1.770566] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 1.770813] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 1.771379] cfg80211: failed to load regulatory.db
[ 1.780084] tsc: Marking TSC unstable due to cpufreq changes
[ 1.780352] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[ 1.780790] sched_clock: Marking unstable (1780701257, 0)<-(1865236204, -84885288)
[ 1.988066] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.027993] ata1.00: ATA-7: ST3160815AS, 4.AAB, max UDMA/133
[ 2.028463] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.102957] ata1.00: configured for UDMA/133
[ 2.103600] scsi 0:0:0:0: Direct-Access ATA ST3160815AS B PQ: 0 ANSI: 5
[ 2.104693] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.105186] sd 0:0:0:0: [sda] Write Protect is off
[ 2.105665] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.105709] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.106799] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.177607] sda: sda1 sda2 < sda5 >
[ 2.178834] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.439389] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[ 2.440151] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
[ 2.480191] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.480447] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[ 2.514071] devtmpfs: mounted
[ 2.517460] Freeing unused kernel memory: 844K
[ 2.517961] Write protecting the kernel read-only data: 22528k
[ 2.520642] Freeing unused kernel memory: 2012K
[ 2.534944] Freeing unused kernel memory: 1972K
[ 2.552416] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.552639] x86/mm: Checking user space page tables
[ 2.567049] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 4.093437] systemd[1]: systemd 236 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 4.094765] systemd[1]: Detected architecture x86-64.
[ 4.117102] systemd[1]: Set hostname to <vanavaarikas2>.
[ 4.857926] systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 4.859033] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 5.299684] systemd[1]: Created slice System Slice.
[ 5.304482] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.305906] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.309640] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.311510] systemd[1]: Listening on udev Kernel Socket.
[ 5.544654] random: crng init done
[ 5.773683] w83627hf: w83627hf: Found W83627HF chip at 0x290
[ 5.773966] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x00000000000000B1-0x00000000001000B0 (\SMIO) (20170831/utaddress-247)
[ 5.775930] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.462731] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 6.684152] systemd-journald[843]: Received request to flush runtime journal from PID 1
[ 7.134098] Floppy drive(s): fd0 is 1.44M
[ 7.155933] FDC 0 is a post-1991 82077
[ 7.157797] scsi host2: pata_ali
[ 7.161657] scsi host3: pata_ali
[ 7.161968] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 7.162313] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 7.164705] parport_pc 00:02: reported by Plug and Play ACPI
[ 7.165053] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 7.175755] ali1535_smbus 0000:00:07.1: enabling device (0000 -> 0001)
[ 7.176023] ali1535_smbus 0000:00:07.1: ALI1535_smb region uninitialized - upgrade BIOS?
[ 7.176531] ali1535_smbus 0000:00:07.1: ALI1535 not detected, module not inserted.
[ 7.317592] ali15x3_smbus 0000:00:07.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 7.317836] ali15x3_smbus 0000:00:07.1: ALI15X3 not detected, module not inserted.
[ 7.325272] alim7101_wdt: Steve Hill <steve@navaho.co.uk>
[ 7.325526] alim7101_wdt: ALi 1543 South-Bridge not present - WDT not set
[ 7.340327] ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33
[ 7.340573] ata3.00: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled
[ 7.341085] ata3.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
[ 7.518021] sym0: <895> rev 0x2 at pci 0000:04:06.0 irq 21
[ 7.520302] ata3.00: configured for UDMA/33
[ 7.530119] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
[ 7.560138] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 7.560381] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 7.561700] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 7.561920] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 7.670260] sym0: Symbios NVRAM, ID 7, Fast-40, SE, parity checking
[ 7.670507] sym0: open drain IRQ line driver, using on-chip SRAM
[ 7.670978] sym0: using LOAD/STORE-based firmware.
[ 7.676209] sym0: SCSI BUS has been reset.
[ 7.678977] sym0: SCSI BUS mode change from SE to SE.
[ 7.682964] sym0: SCSI BUS has been reset.
[ 7.689998] scsi host4: sym-2.2.3
[ 7.805824] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 7.906568] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 7.906864] e100: Copyright(c) 1999-2006 Intel Corporation
[ 8.035802] EDAC amd64: Node 0: DRAM ECC disabled.
[ 8.036061] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 8.596020] snd_intel8x0 0000:00:08.0: AC'97 1 does not respond - RESET
[ 8.597064] snd_intel8x0 0000:00:08.0: AC'97 1 access is not valid [0xffffffff], removing mixer.
[ 8.597359] snd_intel8x0 0000:00:08.0: Unable to initialize codec #1
[ 8.656045] snd_intel8x0 0000:00:08.0: intel8x0_measure_ac97_clock: measured 57264 usecs (2760 samples)
[ 8.656626] snd_intel8x0 0000:00:08.0: clocking to 48000
[ 8.661808] k8temp 0000:00:18.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 9.662073] Adding 5600252k swap on /dev/sda5. Priority:-2 extents:1 across:5600252k
[ 15.187359] e100 0000:04:07.0 eth0: addr 0xfeaed000, irq 22, MAC addr 00:90:27:8c:3a:04
[ 15.230913] e100 0000:04:07.0 enp4s7: renamed from eth0
[ 15.740109] IPv6: ADDRCONF(NETDEV_UP): enp4s7: link is not ready
[ 15.744294] e100 0000:04:07.0 enp4s7: NIC Link is Up 100 Mbps Full Duplex
[ 15.746198] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s7: link becomes ready
[ 316.384669] mce: [Hardware Error]: Machine check events logged
[ 316.384698] [Hardware Error]: Corrected error, no action required.
[ 316.384719] [Hardware Error]: CPU:0 (f:2f:2) MC1_STATUS[-|CE|-|-|AddrV]: 0x9400000000010011
[ 316.384742] [Hardware Error]: Error Addr: 0x0000ffff81e000e0
[ 316.384757] [Hardware Error]: MC1 Error: L1 TLB multimatch.
[ 316.384774] [Hardware Error]: cache level: L1, tx: INSN
[ 627.680196] mce: [Hardware Error]: Machine check events logged
[ 627.680224] [Hardware Error]: Corrected error, no action required.
[ 627.680245] [Hardware Error]: CPU:0 (f:2f:2) MC1_STATUS[-|CE|-|-|AddrV]: 0x9400000000010011
[ 627.680268] [Hardware Error]: Error Addr: 0x0000ffff81e00060
[ 627.680283] [Hardware Error]: MC1 Error: L1 TLB multimatch.
[ 627.680300] [Hardware Error]: cache level: L1, tx: INSN
--
Meelis Roos (mroos@linux.ee)
next reply other threads:[~2018-01-02 20:49 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-02 20:49 Meelis Roos [this message]
2018-01-02 21:27 ` 4.15-rc6 PTI regression: L1 TLB mismatch MCE on Athlon64 Borislav Petkov
2018-01-02 23:07 ` Thomas Gleixner
2018-01-03 9:16 ` Meelis Roos
2018-01-03 12:42 ` Borislav Petkov
2018-01-03 13:17 ` Thomas Gleixner
2018-01-03 13:17 ` Thomas Gleixner
2018-01-03 14:01 ` Meelis Roos
2018-01-03 14:01 ` mroos
2018-01-03 16:22 ` [tip:x86/pti] x86/pti: Make sure the user/kernel PTEs match tip-bot for Thomas Gleixner
2018-02-09 23:30 ` Dave Hansen
2018-02-13 15:59 ` Thomas Gleixner
2018-01-03 7:07 ` 4.15-rc6 PTI regression: L1 TLB mismatch MCE on Athlon64 Meelis Roos
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LRH.2.21.1801022214390.25029@math.ut.ee \
--to=mroos@linux.ee \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.