[PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet

[PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet

[Peter Ujfalusi]

Hi,

cd28d1d6e52e: ("net: phy: at803x: Disable phy delay for RGMII mode") broke the
ethernet networking on evmsk (and most likely on the evm as well):
https://patchwork.ozlabs.org/patch/1028527/

v1 patch to fix the situation:
https://patchwork.ozlabs.org/patch/1040617/

It turned out that the at803x driver is actually broken and need to be fixed
along with the DT data.

The following series is proposed to fix the driver:
https://patchwork.ozlabs.org/project/netdev/list/?series=92611

but the PHT mode needs to be switched to rgmii-id from rgmii-txid:
The rx delay is enabled by default and the driver never disabled it so when
asking rgmii-txid it actually got rgmii-id.

The patch can be backported to stable, I have tested that it is not causing
regression with the old, broken driver.

Regards,
Peter
---
Peter Ujfalusi (2):
  ARM: dts: am335x-evmsk: Fix PHY mode for ethernet
  ARM: dts: am335x-evm: Fix PHY mode for ethernet

 arch/arm/boot/dts/am335x-evm.dts   | 2 +-
 arch/arm/boot/dts/am335x-evmsk.dts | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

[PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet

[Peter Ujfalusi]

Hi,

cd28d1d6e52e: ("net: phy: at803x: Disable phy delay for RGMII mode") broke the
ethernet networking on evmsk (and most likely on the evm as well):
https://patchwork.ozlabs.org/patch/1028527/

v1 patch to fix the situation:
https://patchwork.ozlabs.org/patch/1040617/

It turned out that the at803x driver is actually broken and need to be fixed
along with the DT data.

The following series is proposed to fix the driver:
https://patchwork.ozlabs.org/project/netdev/list/?series=92611

but the PHT mode needs to be switched to rgmii-id from rgmii-txid:
The rx delay is enabled by default and the driver never disabled it so when
asking rgmii-txid it actually got rgmii-id.

The patch can be backported to stable, I have tested that it is not causing
regression with the old, broken driver.

Regards,
Peter
---
Peter Ujfalusi (2):
  ARM: dts: am335x-evmsk: Fix PHY mode for ethernet
  ARM: dts: am335x-evm: Fix PHY mode for ethernet

 arch/arm/boot/dts/am335x-evm.dts   | 2 +-
 arch/arm/boot/dts/am335x-evmsk.dts | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

[PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet

[Peter Ujfalusi]

Hi,

cd28d1d6e52e: ("net: phy: at803x: Disable phy delay for RGMII mode") broke the
ethernet networking on evmsk (and most likely on the evm as well):
https://patchwork.ozlabs.org/patch/1028527/

v1 patch to fix the situation:
https://patchwork.ozlabs.org/patch/1040617/

It turned out that the at803x driver is actually broken and need to be fixed
along with the DT data.

The following series is proposed to fix the driver:
https://patchwork.ozlabs.org/project/netdev/list/?series=92611

but the PHT mode needs to be switched to rgmii-id from rgmii-txid:
The rx delay is enabled by default and the driver never disabled it so when
asking rgmii-txid it actually got rgmii-id.

The patch can be backported to stable, I have tested that it is not causing
regression with the old, broken driver.

Regards,
Peter
---
Peter Ujfalusi (2):
  ARM: dts: am335x-evmsk: Fix PHY mode for ethernet
  ARM: dts: am335x-evm: Fix PHY mode for ethernet

 arch/arm/boot/dts/am335x-evm.dts   | 2 +-
 arch/arm/boot/dts/am335x-evmsk.dts | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/2] ARM: dts: am335x-evmsk: Fix PHY mode for ethernet

[Peter Ujfalusi]

The PHY must add both tx and rx delay and not only on the tx clock.
The board uses AR8031_AL1A PHY where the rx delay is enabled by default,
the tx dealy is disabled.

The reason why rgmii-txid worked because the rx delay was not disabled by
the driver so essentially we ended up with rgmii-id PHY mode.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/boot/dts/am335x-evmsk.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 172c0224e7f6..b128998097ce 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -651,13 +651,13 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
 	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <2>;
 };
 
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

[PATCH 1/2] ARM: dts: am335x-evmsk: Fix PHY mode for ethernet

[Peter Ujfalusi]

The PHY must add both tx and rx delay and not only on the tx clock.
The board uses AR8031_AL1A PHY where the rx delay is enabled by default,
the tx dealy is disabled.

The reason why rgmii-txid worked because the rx delay was not disabled by
the driver so essentially we ended up with rgmii-id PHY mode.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/boot/dts/am335x-evmsk.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 172c0224e7f6..b128998097ce 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -651,13 +651,13 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
 	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <2>;
 };
 
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

[PATCH 1/2] ARM: dts: am335x-evmsk: Fix PHY mode for ethernet

[Peter Ujfalusi]

The PHY must add both tx and rx delay and not only on the tx clock.
The board uses AR8031_AL1A PHY where the rx delay is enabled by default,
the tx dealy is disabled.

The reason why rgmii-txid worked because the rx delay was not disabled by
the driver so essentially we ended up with rgmii-id PHY mode.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/boot/dts/am335x-evmsk.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 172c0224e7f6..b128998097ce 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -651,13 +651,13 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
 	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <2>;
 };
 
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/2] ARM: dts: am335x-evm: Fix PHY mode for ethernet

[Peter Ujfalusi]

The PHY must add both tx and rx delay and not only on the tx clock.
The board uses AR8031_AL1A PHY where the rx delay is enabled by default,
the tx dealy is disabled.

The reason why rgmii-txid worked because the rx delay was not disabled by
the driver so essentially we ended up with rgmii-id PHY mode.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/boot/dts/am335x-evm.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index b67f5fee1469..dce5be5df97b 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -729,7 +729,7 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 };
 
 &tscadc {
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

[PATCH 2/2] ARM: dts: am335x-evm: Fix PHY mode for ethernet

[Peter Ujfalusi]

The PHY must add both tx and rx delay and not only on the tx clock.
The board uses AR8031_AL1A PHY where the rx delay is enabled by default,
the tx dealy is disabled.

The reason why rgmii-txid worked because the rx delay was not disabled by
the driver so essentially we ended up with rgmii-id PHY mode.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/boot/dts/am335x-evm.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index b67f5fee1469..dce5be5df97b 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -729,7 +729,7 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 };
 
 &tscadc {
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

[PATCH 2/2] ARM: dts: am335x-evm: Fix PHY mode for ethernet

[Peter Ujfalusi]

The PHY must add both tx and rx delay and not only on the tx clock.
The board uses AR8031_AL1A PHY where the rx delay is enabled by default,
the tx dealy is disabled.

The reason why rgmii-txid worked because the rx delay was not disabled by
the driver so essentially we ended up with rgmii-id PHY mode.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/boot/dts/am335x-evm.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index b67f5fee1469..dce5be5df97b 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -729,7 +729,7 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 };
 
 &tscadc {
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet

[Tony Lindgren]

* Peter Ujfalusi <peter.ujfalusi@ti.com> [190218 14:36]:
> Hi,
> 
> cd28d1d6e52e: ("net: phy: at803x: Disable phy delay for RGMII mode") broke the
> ethernet networking on evmsk (and most likely on the evm as well):
> https://patchwork.ozlabs.org/patch/1028527/
> 
> v1 patch to fix the situation:
> https://patchwork.ozlabs.org/patch/1040617/
> 
> It turned out that the at803x driver is actually broken and need to be fixed
> along with the DT data.
> 
> The following series is proposed to fix the driver:
> https://patchwork.ozlabs.org/project/netdev/list/?series=92611
> 
> but the PHT mode needs to be switched to rgmii-id from rgmii-txid:
> The rx delay is enabled by default and the driver never disabled it so when
> asking rgmii-txid it actually got rgmii-id.
> 
> The patch can be backported to stable, I have tested that it is not causing
> regression with the old, broken driver.

Can the dts changes be merged before the driver changes or
does it cause the phy to stop working?

Regards,

Tony

Re: [PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet

[Tony Lindgren]

* Peter Ujfalusi <peter.ujfalusi@ti.com> [190218 14:36]:
> Hi,
> 
> cd28d1d6e52e: ("net: phy: at803x: Disable phy delay for RGMII mode") broke the
> ethernet networking on evmsk (and most likely on the evm as well):
> https://patchwork.ozlabs.org/patch/1028527/
> 
> v1 patch to fix the situation:
> https://patchwork.ozlabs.org/patch/1040617/
> 
> It turned out that the at803x driver is actually broken and need to be fixed
> along with the DT data.
> 
> The following series is proposed to fix the driver:
> https://patchwork.ozlabs.org/project/netdev/list/?series=92611
> 
> but the PHT mode needs to be switched to rgmii-id from rgmii-txid:
> The rx delay is enabled by default and the driver never disabled it so when
> asking rgmii-txid it actually got rgmii-id.
> 
> The patch can be backported to stable, I have tested that it is not causing
> regression with the old, broken driver.

Can the dts changes be merged before the driver changes or
does it cause the phy to stop working?

Regards,

Tony

Re: [PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet

[Tony Lindgren]

* Peter Ujfalusi <peter.ujfalusi@ti.com> [190218 14:36]:
> Hi,
> 
> cd28d1d6e52e: ("net: phy: at803x: Disable phy delay for RGMII mode") broke the
> ethernet networking on evmsk (and most likely on the evm as well):
> https://patchwork.ozlabs.org/patch/1028527/
> 
> v1 patch to fix the situation:
> https://patchwork.ozlabs.org/patch/1040617/
> 
> It turned out that the at803x driver is actually broken and need to be fixed
> along with the DT data.
> 
> The following series is proposed to fix the driver:
> https://patchwork.ozlabs.org/project/netdev/list/?series=92611
> 
> but the PHT mode needs to be switched to rgmii-id from rgmii-txid:
> The rx delay is enabled by default and the driver never disabled it so when
> asking rgmii-txid it actually got rgmii-id.
> 
> The patch can be backported to stable, I have tested that it is not causing
> regression with the old, broken driver.

Can the dts changes be merged before the driver changes or
does it cause the phy to stop working?

Regards,

Tony

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet

[Peter Ujfalusi]

On 18/02/2019 16.44, Tony Lindgren wrote:
> * Peter Ujfalusi <peter.ujfalusi@ti.com> [190218 14:36]:
>> Hi,
>>
>> cd28d1d6e52e: ("net: phy: at803x: Disable phy delay for RGMII mode") broke the
>> ethernet networking on evmsk (and most likely on the evm as well):
>> https://patchwork.ozlabs.org/patch/1028527/
>>
>> v1 patch to fix the situation:
>> https://patchwork.ozlabs.org/patch/1040617/
>>
>> It turned out that the at803x driver is actually broken and need to be fixed
>> along with the DT data.
>>
>> The following series is proposed to fix the driver:
>> https://patchwork.ozlabs.org/project/netdev/list/?series=92611
>>
>> but the PHT mode needs to be switched to rgmii-id from rgmii-txid:
>> The rx delay is enabled by default and the driver never disabled it so when
>> asking rgmii-txid it actually got rgmii-id.
>>
>> The patch can be backported to stable, I have tested that it is not causing
>> regression with the old, broken driver.
> 
> Can the dts changes be merged before the driver changes or
> does it cause the phy to stop working?

The phy is not working atm, but this change will not cause regression
even if it is merged first.

> 
> Regards,
> 
> Tony
> 

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

Re: [PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet

[Peter Ujfalusi]

On 18/02/2019 16.44, Tony Lindgren wrote:
> * Peter Ujfalusi <peter.ujfalusi@ti.com> [190218 14:36]:
>> Hi,
>>
>> cd28d1d6e52e: ("net: phy: at803x: Disable phy delay for RGMII mode") broke the
>> ethernet networking on evmsk (and most likely on the evm as well):
>> https://patchwork.ozlabs.org/patch/1028527/
>>
>> v1 patch to fix the situation:
>> https://patchwork.ozlabs.org/patch/1040617/
>>
>> It turned out that the at803x driver is actually broken and need to be fixed
>> along with the DT data.
>>
>> The following series is proposed to fix the driver:
>> https://patchwork.ozlabs.org/project/netdev/list/?series=92611
>>
>> but the PHT mode needs to be switched to rgmii-id from rgmii-txid:
>> The rx delay is enabled by default and the driver never disabled it so when
>> asking rgmii-txid it actually got rgmii-id.
>>
>> The patch can be backported to stable, I have tested that it is not causing
>> regression with the old, broken driver.
> 
> Can the dts changes be merged before the driver changes or
> does it cause the phy to stop working?

The phy is not working atm, but this change will not cause regression
even if it is merged first.

> 
> Regards,
> 
> Tony
> 

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

Re: [PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet

[Peter Ujfalusi]

On 18/02/2019 16.44, Tony Lindgren wrote:
> * Peter Ujfalusi <peter.ujfalusi@ti.com> [190218 14:36]:
>> Hi,
>>
>> cd28d1d6e52e: ("net: phy: at803x: Disable phy delay for RGMII mode") broke the
>> ethernet networking on evmsk (and most likely on the evm as well):
>> https://patchwork.ozlabs.org/patch/1028527/
>>
>> v1 patch to fix the situation:
>> https://patchwork.ozlabs.org/patch/1040617/
>>
>> It turned out that the at803x driver is actually broken and need to be fixed
>> along with the DT data.
>>
>> The following series is proposed to fix the driver:
>> https://patchwork.ozlabs.org/project/netdev/list/?series=92611
>>
>> but the PHT mode needs to be switched to rgmii-id from rgmii-txid:
>> The rx delay is enabled by default and the driver never disabled it so when
>> asking rgmii-txid it actually got rgmii-id.
>>
>> The patch can be backported to stable, I have tested that it is not causing
>> regression with the old, broken driver.
> 
> Can the dts changes be merged before the driver changes or
> does it cause the phy to stop working?

The phy is not working atm, but this change will not cause regression
even if it is merged first.

> 
> Regards,
> 
> Tony
> 

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet

[Tony Lindgren]

* Peter Ujfalusi <peter.ujfalusi@ti.com> [190218 16:22]:
> 
> 
> On 18/02/2019 16.44, Tony Lindgren wrote:
> > * Peter Ujfalusi <peter.ujfalusi@ti.com> [190218 14:36]:
> >> Hi,
> >>
> >> cd28d1d6e52e: ("net: phy: at803x: Disable phy delay for RGMII mode") broke the
> >> ethernet networking on evmsk (and most likely on the evm as well):
> >> https://patchwork.ozlabs.org/patch/1028527/
> >>
> >> v1 patch to fix the situation:
> >> https://patchwork.ozlabs.org/patch/1040617/
> >>
> >> It turned out that the at803x driver is actually broken and need to be fixed
> >> along with the DT data.
> >>
> >> The following series is proposed to fix the driver:
> >> https://patchwork.ozlabs.org/project/netdev/list/?series=92611
> >>
> >> but the PHT mode needs to be switched to rgmii-id from rgmii-txid:
> >> The rx delay is enabled by default and the driver never disabled it so when
> >> asking rgmii-txid it actually got rgmii-id.
> >>
> >> The patch can be backported to stable, I have tested that it is not causing
> >> regression with the old, broken driver.
> > 
> > Can the dts changes be merged before the driver changes or
> > does it cause the phy to stop working?
> 
> The phy is not working atm, but this change will not cause regression
> even if it is merged first.

OK so sounds like these are OK to wait for v5.1 merge window
then as the dts changes alone won't fix anything?

Regards,

Tony

Re: [PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet

[Tony Lindgren]

* Peter Ujfalusi <peter.ujfalusi@ti.com> [190218 16:22]:
> 
> 
> On 18/02/2019 16.44, Tony Lindgren wrote:
> > * Peter Ujfalusi <peter.ujfalusi@ti.com> [190218 14:36]:
> >> Hi,
> >>
> >> cd28d1d6e52e: ("net: phy: at803x: Disable phy delay for RGMII mode") broke the
> >> ethernet networking on evmsk (and most likely on the evm as well):
> >> https://patchwork.ozlabs.org/patch/1028527/
> >>
> >> v1 patch to fix the situation:
> >> https://patchwork.ozlabs.org/patch/1040617/
> >>
> >> It turned out that the at803x driver is actually broken and need to be fixed
> >> along with the DT data.
> >>
> >> The following series is proposed to fix the driver:
> >> https://patchwork.ozlabs.org/project/netdev/list/?series=92611
> >>
> >> but the PHT mode needs to be switched to rgmii-id from rgmii-txid:
> >> The rx delay is enabled by default and the driver never disabled it so when
> >> asking rgmii-txid it actually got rgmii-id.
> >>
> >> The patch can be backported to stable, I have tested that it is not causing
> >> regression with the old, broken driver.
> > 
> > Can the dts changes be merged before the driver changes or
> > does it cause the phy to stop working?
> 
> The phy is not working atm, but this change will not cause regression
> even if it is merged first.

OK so sounds like these are OK to wait for v5.1 merge window
then as the dts changes alone won't fix anything?

Regards,

Tony

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet

[Peter Ujfalusi]

Hi Tony,

On 18/02/2019 18.26, Tony Lindgren wrote:
> * Peter Ujfalusi <peter.ujfalusi@ti.com> [190218 16:22]:
>>
>>
>> On 18/02/2019 16.44, Tony Lindgren wrote:
>>> * Peter Ujfalusi <peter.ujfalusi@ti.com> [190218 14:36]:
>>>> Hi,
>>>>
>>>> cd28d1d6e52e: ("net: phy: at803x: Disable phy delay for RGMII mode") broke the
>>>> ethernet networking on evmsk (and most likely on the evm as well):
>>>> https://patchwork.ozlabs.org/patch/1028527/
>>>>
>>>> v1 patch to fix the situation:
>>>> https://patchwork.ozlabs.org/patch/1040617/
>>>>
>>>> It turned out that the at803x driver is actually broken and need to be fixed
>>>> along with the DT data.
>>>>
>>>> The following series is proposed to fix the driver:
>>>> https://patchwork.ozlabs.org/project/netdev/list/?series=92611
>>>>
>>>> but the PHT mode needs to be switched to rgmii-id from rgmii-txid:
>>>> The rx delay is enabled by default and the driver never disabled it so when
>>>> asking rgmii-txid it actually got rgmii-id.
>>>>
>>>> The patch can be backported to stable, I have tested that it is not causing
>>>> regression with the old, broken driver.
>>>
>>> Can the dts changes be merged before the driver changes or
>>> does it cause the phy to stop working?
>>
>> The phy is not working atm, but this change will not cause regression
>> even if it is merged first.
> 
> OK so sounds like these are OK to wait for v5.1 merge window
> then as the dts changes alone won't fix anything?

I think it would be better to send these to 5.0 to avoid the regression
siting in linux-next.

The patches are actually doing to the correct thing (we need rgmii-id,
not rmgii-txid for these boards).
It was just a matter of luck that it worked with rgmii-txid as the
driver was broken and did not disabled the rxid when it should have.

Tested the patch on top of mainline
(b5372fe5dc84235dbe04998efdede3c4daa866a9) was the topmost commit after
the rc7 tag.

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

Re: [PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet

[Peter Ujfalusi]

Hi Tony,

On 18/02/2019 18.26, Tony Lindgren wrote:
> * Peter Ujfalusi <peter.ujfalusi@ti.com> [190218 16:22]:
>>
>>
>> On 18/02/2019 16.44, Tony Lindgren wrote:
>>> * Peter Ujfalusi <peter.ujfalusi@ti.com> [190218 14:36]:
>>>> Hi,
>>>>
>>>> cd28d1d6e52e: ("net: phy: at803x: Disable phy delay for RGMII mode") broke the
>>>> ethernet networking on evmsk (and most likely on the evm as well):
>>>> https://patchwork.ozlabs.org/patch/1028527/
>>>>
>>>> v1 patch to fix the situation:
>>>> https://patchwork.ozlabs.org/patch/1040617/
>>>>
>>>> It turned out that the at803x driver is actually broken and need to be fixed
>>>> along with the DT data.
>>>>
>>>> The following series is proposed to fix the driver:
>>>> https://patchwork.ozlabs.org/project/netdev/list/?series=92611
>>>>
>>>> but the PHT mode needs to be switched to rgmii-id from rgmii-txid:
>>>> The rx delay is enabled by default and the driver never disabled it so when
>>>> asking rgmii-txid it actually got rgmii-id.
>>>>
>>>> The patch can be backported to stable, I have tested that it is not causing
>>>> regression with the old, broken driver.
>>>
>>> Can the dts changes be merged before the driver changes or
>>> does it cause the phy to stop working?
>>
>> The phy is not working atm, but this change will not cause regression
>> even if it is merged first.
> 
> OK so sounds like these are OK to wait for v5.1 merge window
> then as the dts changes alone won't fix anything?

I think it would be better to send these to 5.0 to avoid the regression
siting in linux-next.

The patches are actually doing to the correct thing (we need rgmii-id,
not rmgii-txid for these boards).
It was just a matter of luck that it worked with rgmii-txid as the
driver was broken and did not disabled the rxid when it should have.

Tested the patch on top of mainline
(b5372fe5dc84235dbe04998efdede3c4daa866a9) was the topmost commit after
the rc7 tag.

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

Re: [PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet

[Peter Ujfalusi]

Hi Tony,

On 18/02/2019 18.26, Tony Lindgren wrote:
> * Peter Ujfalusi <peter.ujfalusi@ti.com> [190218 16:22]:
>>
>>
>> On 18/02/2019 16.44, Tony Lindgren wrote:
>>> * Peter Ujfalusi <peter.ujfalusi@ti.com> [190218 14:36]:
>>>> Hi,
>>>>
>>>> cd28d1d6e52e: ("net: phy: at803x: Disable phy delay for RGMII mode") broke the
>>>> ethernet networking on evmsk (and most likely on the evm as well):
>>>> https://patchwork.ozlabs.org/patch/1028527/
>>>>
>>>> v1 patch to fix the situation:
>>>> https://patchwork.ozlabs.org/patch/1040617/
>>>>
>>>> It turned out that the at803x driver is actually broken and need to be fixed
>>>> along with the DT data.
>>>>
>>>> The following series is proposed to fix the driver:
>>>> https://patchwork.ozlabs.org/project/netdev/list/?series=92611
>>>>
>>>> but the PHT mode needs to be switched to rgmii-id from rgmii-txid:
>>>> The rx delay is enabled by default and the driver never disabled it so when
>>>> asking rgmii-txid it actually got rgmii-id.
>>>>
>>>> The patch can be backported to stable, I have tested that it is not causing
>>>> regression with the old, broken driver.
>>>
>>> Can the dts changes be merged before the driver changes or
>>> does it cause the phy to stop working?
>>
>> The phy is not working atm, but this change will not cause regression
>> even if it is merged first.
> 
> OK so sounds like these are OK to wait for v5.1 merge window
> then as the dts changes alone won't fix anything?

I think it would be better to send these to 5.0 to avoid the regression
siting in linux-next.

The patches are actually doing to the correct thing (we need rgmii-id,
not rmgii-txid for these boards).
It was just a matter of luck that it worked with rgmii-txid as the
driver was broken and did not disabled the rxid when it should have.

Tested the patch on top of mainline
(b5372fe5dc84235dbe04998efdede3c4daa866a9) was the topmost commit after
the rc7 tag.

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet

[Tony Lindgren]

* Peter Ujfalusi <peter.ujfalusi@ti.com> [190219 08:02]:
> On 18/02/2019 18.26, Tony Lindgren wrote:
> > OK so sounds like these are OK to wait for v5.1 merge window
> > then as the dts changes alone won't fix anything?
> 
> I think it would be better to send these to 5.0 to avoid the regression
> siting in linux-next.
> 
> The patches are actually doing to the correct thing (we need rgmii-id,
> not rmgii-txid for these boards).
> It was just a matter of luck that it worked with rgmii-txid as the
> driver was broken and did not disabled the rxid when it should have.

OK applying into omap-for-v5.0/fixes-v2. I'll send a pull
request on Thursday most likely then, let's see if it makes
it for v5.0.

Regards,

Tony

Re: [PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet

[Tony Lindgren]

* Peter Ujfalusi <peter.ujfalusi@ti.com> [190219 08:02]:
> On 18/02/2019 18.26, Tony Lindgren wrote:
> > OK so sounds like these are OK to wait for v5.1 merge window
> > then as the dts changes alone won't fix anything?
> 
> I think it would be better to send these to 5.0 to avoid the regression
> siting in linux-next.
> 
> The patches are actually doing to the correct thing (we need rgmii-id,
> not rmgii-txid for these boards).
> It was just a matter of luck that it worked with rgmii-txid as the
> driver was broken and did not disabled the rxid when it should have.

OK applying into omap-for-v5.0/fixes-v2. I'll send a pull
request on Thursday most likely then, let's see if it makes
it for v5.0.

Regards,

Tony

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet

[Peter Ujfalusi]

Hi Tony,

On 19/02/2019 18.52, Tony Lindgren wrote:
> * Peter Ujfalusi <peter.ujfalusi@ti.com> [190219 08:02]:
>> On 18/02/2019 18.26, Tony Lindgren wrote:
>>> OK so sounds like these are OK to wait for v5.1 merge window
>>> then as the dts changes alone won't fix anything?
>>
>> I think it would be better to send these to 5.0 to avoid the regression
>> siting in linux-next.
>>
>> The patches are actually doing to the correct thing (we need rgmii-id,
>> not rmgii-txid for these boards).
>> It was just a matter of luck that it worked with rgmii-txid as the
>> driver was broken and did not disabled the rxid when it should have.
> 
> OK applying into omap-for-v5.0/fixes-v2. I'll send a pull
> request on Thursday most likely then, let's see if it makes
> it for v5.0.

Thank you!

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

Re: [PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet

[Peter Ujfalusi]

Hi Tony,

On 19/02/2019 18.52, Tony Lindgren wrote:
> * Peter Ujfalusi <peter.ujfalusi@ti.com> [190219 08:02]:
>> On 18/02/2019 18.26, Tony Lindgren wrote:
>>> OK so sounds like these are OK to wait for v5.1 merge window
>>> then as the dts changes alone won't fix anything?
>>
>> I think it would be better to send these to 5.0 to avoid the regression
>> siting in linux-next.
>>
>> The patches are actually doing to the correct thing (we need rgmii-id,
>> not rmgii-txid for these boards).
>> It was just a matter of luck that it worked with rgmii-txid as the
>> driver was broken and did not disabled the rxid when it should have.
> 
> OK applying into omap-for-v5.0/fixes-v2. I'll send a pull
> request on Thursday most likely then, let's see if it makes
> it for v5.0.

Thank you!

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

Re: [PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet

[Peter Ujfalusi]

Hi Tony,

On 19/02/2019 18.52, Tony Lindgren wrote:
> * Peter Ujfalusi <peter.ujfalusi@ti.com> [190219 08:02]:
>> On 18/02/2019 18.26, Tony Lindgren wrote:
>>> OK so sounds like these are OK to wait for v5.1 merge window
>>> then as the dts changes alone won't fix anything?
>>
>> I think it would be better to send these to 5.0 to avoid the regression
>> siting in linux-next.
>>
>> The patches are actually doing to the correct thing (we need rgmii-id,
>> not rmgii-txid for these boards).
>> It was just a matter of luck that it worked with rgmii-txid as the
>> driver was broken and did not disabled the rxid when it should have.
> 
> OK applying into omap-for-v5.0/fixes-v2. I'll send a pull
> request on Thursday most likely then, let's see if it makes
> it for v5.0.

Thank you!

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel