[Qemu-devel] [PATCH target-arm v5 00/14] Next Generation Xilinx Zynq SoC

[Qemu-devel] [PATCH target-arm v5 00/14] Next Generation Xilinx Zynq SoC

[Peter Crosthwaite]

Hi Peter and all,

Xilinx's next gen SoC has been announced. This series adds a SoC and
board.

Series start with addition of ARM cortex A53 support (P1 and P2). The
Soc skeleton is then added with GIC, EMACs and UARTs are added. The
pre-existing models for GEM and UART are not SoC friendly (no visible
state struct), so those are refactored for SoC.

Create a model of the EP108 board. Currently this doesn't have any
EP108 specific features but is a usable board exposing the user visible
features of the raw SoC.

See individual patches for detailed change logs.

changed since v4:
Addressed PMM and Alistair Reviews

changed since v3:
Included CPU thread kick fix
Addressed Alistair review

changed since v2:
Fix CPU child prop adder
Add DTS compat string

changed since v1:
Addressed Alistair review (individual changes on resp. patches)
Changed board name to EP108
Changed naming scheme to "zynqmp" / "ZYNQMP" (Michal review)

Regards,
Peter


Peter Crosthwaite (14):
  target-arm: cpu64: generalise name of A57 regs
  target-arm: cpu64: Add support for cortex-a53
  arm: Introduce Xilinx ZynqMP SoC
  arm: xlnx-zynqmp: Add GIC
  arm: xlnx-zynqmp: Connect CPU Timers to GIC
  net: cadence_gem: Clean up variable names
  net: cadence_gem: Split state struct and type into header
  arm: xilinx-zynqmp: Add GEM support
  char: cadence_uart: Clean up variable names
  char: cadence_uart: Split state struct and type into header
  arm: xilinx-zynqmp: Add UART support
  arm: Add xlnx-ep108 machine
  arm: xilinx-ep108: Add external RAM
  arm: xilinx-ep108: Add bootloading

 default-configs/aarch64-softmmu.mak |   2 +-
 hw/arm/Makefile.objs                |   1 +
 hw/arm/xlnx-ep108.c                 |  82 ++++++++++++++++
 hw/arm/xlnx-zynqmp.c                | 188 ++++++++++++++++++++++++++++++++++++
 hw/char/cadence_uart.c              | 115 +++++++++-------------
 hw/net/cadence_gem.c                |  95 ++++++------------
 include/hw/arm/xlnx-zynqmp.h        |  46 +++++++++
 include/hw/char/cadence_uart.h      |  53 ++++++++++
 include/hw/net/cadence_gem.h        |  73 ++++++++++++++
 target-arm/cpu64.c                  |  61 +++++++++++-
 10 files changed, 574 insertions(+), 142 deletions(-)
 create mode 100644 hw/arm/xlnx-ep108.c
 create mode 100644 hw/arm/xlnx-zynqmp.c
 create mode 100644 include/hw/arm/xlnx-zynqmp.h
 create mode 100644 include/hw/char/cadence_uart.h
 create mode 100644 include/hw/net/cadence_gem.h

-- 
2.3.6.3.g2cc70ee

[Qemu-devel] [PATCH target-arm v5 01/14] target-arm: cpu64: generalise name of A57 regs

[Peter Crosthwaite]

Rename some A57 CP register variables in preparation for support for
Cortex A53. Use "a57_a53" to describe the shareable features. Some of
the CP15 registers (such as ACTLR) are specific to implementation, but
we currently just RAZ them so continue with that as the policy for both
A57 and A53 processors under a shared definition.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
---
changed since v4 (PMM review):
Use a57_a53 instead of axx
Drop initfn refactorings

 target-arm/cpu64.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/target-arm/cpu64.c b/target-arm/cpu64.c
index 270bc2f..13e042e 100644
--- a/target-arm/cpu64.c
+++ b/target-arm/cpu64.c
@@ -38,22 +38,22 @@ static inline void unset_feature(CPUARMState *env, int feature)
 }
 
 #ifndef CONFIG_USER_ONLY
-static uint64_t a57_l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri)
+static uint64_t a57_a53_l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri)
 {
     /* Number of processors is in [25:24]; otherwise we RAZ */
     return (smp_cpus - 1) << 24;
 }
 #endif
 
-static const ARMCPRegInfo cortexa57_cp_reginfo[] = {
+static const ARMCPRegInfo cortex_a57_a53_cp_reginfo[] = {
 #ifndef CONFIG_USER_ONLY
     { .name = "L2CTLR_EL1", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 1, .crn = 11, .crm = 0, .opc2 = 2,
-      .access = PL1_RW, .readfn = a57_l2ctlr_read,
+      .access = PL1_RW, .readfn = a57_a53_l2ctlr_read,
       .writefn = arm_cp_write_ignore },
     { .name = "L2CTLR",
       .cp = 15, .opc1 = 1, .crn = 9, .crm = 0, .opc2 = 2,
-      .access = PL1_RW, .readfn = a57_l2ctlr_read,
+      .access = PL1_RW, .readfn = a57_a53_l2ctlr_read,
       .writefn = arm_cp_write_ignore },
 #endif
     { .name = "L2ECTLR_EL1", .state = ARM_CP_STATE_AA64,
@@ -140,7 +140,7 @@ static void aarch64_a57_initfn(Object *obj)
     cpu->ccsidr[1] = 0x201fe012; /* 48KB L1 icache */
     cpu->ccsidr[2] = 0x70ffe07a; /* 2048KB L2 cache */
     cpu->dcz_blocksize = 4; /* 64 bytes */
-    define_arm_cp_regs(cpu, cortexa57_cp_reginfo);
+    define_arm_cp_regs(cpu, cortex_a57_a53_cp_reginfo);
 }
 
 #ifdef CONFIG_USER_ONLY
-- 
2.3.6.3.g2cc70ee

[Qemu-devel] [PATCH target-arm v5 02/14] target-arm: cpu64: Add support for cortex-a53

[Peter Crosthwaite]

Add the ARM cortex A53 processor definition. Similar to A57, but with
different L1 I cache policy, phys addr size and different cache
geometries. The cache sizes is implementation configurable, but use
these values (from Xilinx Zynq MPSoC) as a default until cache size
configurability is added.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
---
Changed since v4:
Fix a53/a57 typo in commit message (Ozaki)
Use standalone init fn rather than a57-shared one (PMM).
Changed since v2:
Added dtb compatible string

 target-arm/cpu64.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/target-arm/cpu64.c b/target-arm/cpu64.c
index 13e042e..bf7dd68 100644
--- a/target-arm/cpu64.c
+++ b/target-arm/cpu64.c
@@ -143,6 +143,56 @@ static void aarch64_a57_initfn(Object *obj)
     define_arm_cp_regs(cpu, cortex_a57_a53_cp_reginfo);
 }
 
+static void aarch64_a53_initfn(Object *obj)
+{
+    ARMCPU *cpu = ARM_CPU(obj);
+
+    cpu->dtb_compatible = "arm,cortex-a53";
+    set_feature(&cpu->env, ARM_FEATURE_V8);
+    set_feature(&cpu->env, ARM_FEATURE_VFP4);
+    set_feature(&cpu->env, ARM_FEATURE_NEON);
+    set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER);
+    set_feature(&cpu->env, ARM_FEATURE_AARCH64);
+    set_feature(&cpu->env, ARM_FEATURE_CBAR_RO);
+    set_feature(&cpu->env, ARM_FEATURE_V8_AES);
+    set_feature(&cpu->env, ARM_FEATURE_V8_SHA1);
+    set_feature(&cpu->env, ARM_FEATURE_V8_SHA256);
+    set_feature(&cpu->env, ARM_FEATURE_V8_PMULL);
+    set_feature(&cpu->env, ARM_FEATURE_CRC);
+    cpu->midr = 0x410fd034;
+    cpu->reset_fpsid = 0x41034070;
+    cpu->mvfr0 = 0x10110222;
+    cpu->mvfr1 = 0x12111111;
+    cpu->mvfr2 = 0x00000043;
+    cpu->ctr = 0x84448004; /* L1Ip = VIPT */
+    cpu->reset_sctlr = 0x00c50838;
+    cpu->id_pfr0 = 0x00000131;
+    cpu->id_pfr1 = 0x00011011;
+    cpu->id_dfr0 = 0x03010066;
+    cpu->id_afr0 = 0x00000000;
+    cpu->id_mmfr0 = 0x10101105;
+    cpu->id_mmfr1 = 0x40000000;
+    cpu->id_mmfr2 = 0x01260000;
+    cpu->id_mmfr3 = 0x02102211;
+    cpu->id_isar0 = 0x02101110;
+    cpu->id_isar1 = 0x13112111;
+    cpu->id_isar2 = 0x21232042;
+    cpu->id_isar3 = 0x01112131;
+    cpu->id_isar4 = 0x00011142;
+    cpu->id_isar5 = 0x00011121;
+    cpu->id_aa64pfr0 = 0x00002222;
+    cpu->id_aa64dfr0 = 0x10305106;
+    cpu->id_aa64isar0 = 0x00011120;
+    cpu->id_aa64mmfr0 = 0x00001122; /* 40 bit physical addr */
+    cpu->dbgdidr = 0x3516d000;
+    cpu->clidr = 0x0a200023;
+    cpu->ccsidr[0] = 0x700fe01a; /* 32KB L1 dcache */
+    cpu->ccsidr[1] = 0x201fe00a; /* 32KB L1 icache */
+    cpu->ccsidr[2] = 0x707fe07a; /* 1024KB L2 cache */
+    cpu->dcz_blocksize = 4; /* 64 bytes */
+    define_arm_cp_regs(cpu, cortex_a57_a53_cp_reginfo);
+}
+
 #ifdef CONFIG_USER_ONLY
 static void aarch64_any_initfn(Object *obj)
 {
@@ -170,6 +220,7 @@ typedef struct ARMCPUInfo {
 
 static const ARMCPUInfo aarch64_cpus[] = {
     { .name = "cortex-a57",         .initfn = aarch64_a57_initfn },
+    { .name = "cortex-a53",         .initfn = aarch64_a53_initfn },
 #ifdef CONFIG_USER_ONLY
     { .name = "any",         .initfn = aarch64_any_initfn },
 #endif
-- 
2.3.6.3.g2cc70ee

[Qemu-devel] [PATCH target-arm v5 03/14] arm: Introduce Xilinx ZynqMP SoC

[Peter Crosthwaite]

With quad Cortex-A53 CPUs.

Use SMC PSCI, with the standard policy of secondaries starting in
power-off.

Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
---
Add has_el3
changed since v4 (PMM review):
Squashed in PSCI stuffs.
Add (c) info to new header
Remove extraneous trailing __ from header guard define
remove ERR_PROP_CHECK_RETURN
changed since v2:
Added [*] to cpu child property name.
changed since v1:
Add &error_abort to CPU child adder call.

 default-configs/aarch64-softmmu.mak |  2 +-
 hw/arm/Makefile.objs                |  1 +
 hw/arm/xlnx-zynqmp.c                | 82 +++++++++++++++++++++++++++++++++++++
 include/hw/arm/xlnx-zynqmp.h        | 38 +++++++++++++++++
 4 files changed, 122 insertions(+), 1 deletion(-)
 create mode 100644 hw/arm/xlnx-zynqmp.c
 create mode 100644 include/hw/arm/xlnx-zynqmp.h

diff --git a/default-configs/aarch64-softmmu.mak b/default-configs/aarch64-softmmu.mak
index 6d3b5c7..96dd994 100644
--- a/default-configs/aarch64-softmmu.mak
+++ b/default-configs/aarch64-softmmu.mak
@@ -3,4 +3,4 @@
 # We support all the 32 bit boards so need all their config
 include arm-softmmu.mak
 
-# Currently no 64-bit specific config requirements
+CONFIG_XLNX_ZYNQMP=y
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index 2577f68..d7cd5f4 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -10,3 +10,4 @@ obj-$(CONFIG_DIGIC) += digic.o
 obj-y += omap1.o omap2.o strongarm.o
 obj-$(CONFIG_ALLWINNER_A10) += allwinner-a10.o cubieboard.o
 obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o
+obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp.o
diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
new file mode 100644
index 0000000..daeec0e
--- /dev/null
+++ b/hw/arm/xlnx-zynqmp.c
@@ -0,0 +1,82 @@
+/*
+ * Xilinx Zynq MPSoC emulation
+ *
+ * Copyright (C) 2015 Xilinx Inc
+ * Written by Peter Crosthwaite <peter.crosthwaite@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "hw/arm/xlnx-zynqmp.h"
+
+static void xlnx_zynqmp_init(Object *obj)
+{
+    XlnxZynqMPState *s = XLNX_ZYNQMP(obj);
+    int i;
+
+    for (i = 0; i < XLNX_ZYNQMP_NUM_CPUS; i++) {
+        object_initialize(&s->cpu[i], sizeof(s->cpu[i]),
+                          "cortex-a53-" TYPE_ARM_CPU);
+        object_property_add_child(obj, "cpu[*]", OBJECT(&s->cpu[i]),
+                                  &error_abort);
+    }
+}
+
+static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
+{
+    XlnxZynqMPState *s = XLNX_ZYNQMP(dev);
+    uint8_t i;
+    Error *err = NULL;
+
+    for (i = 0; i < XLNX_ZYNQMP_NUM_CPUS; i++) {
+        object_property_set_int(OBJECT(&s->cpu[i]), QEMU_PSCI_CONDUIT_SMC,
+                                "psci-conduit", &error_abort);
+        if (i > 0) {
+            /* Secondary CPUs start in PSCI powered-down state */
+            object_property_set_bool(OBJECT(&s->cpu[i]), true,
+                                     "start-powered-off", &error_abort);
+        }
+
+        object_property_set_bool(OBJECT(&s->cpu[i]), true, "has_el3", &err);
+        if (err) {
+            error_propagate((errp), (err));
+            return;
+        }
+
+        object_property_set_bool(OBJECT(&s->cpu[i]), true, "realized", &err);
+        if (err) {
+            error_propagate((errp), (err));
+            return;
+        }
+    }
+}
+
+static void xlnx_zynqmp_class_init(ObjectClass *oc, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(oc);
+
+    dc->realize = xlnx_zynqmp_realize;
+}
+
+static const TypeInfo xlnx_zynqmp_type_info = {
+    .name = TYPE_XLNX_ZYNQMP,
+    .parent = TYPE_DEVICE,
+    .instance_size = sizeof(XlnxZynqMPState),
+    .instance_init = xlnx_zynqmp_init,
+    .class_init = xlnx_zynqmp_class_init,
+};
+
+static void xlnx_zynqmp_register_types(void)
+{
+    type_register_static(&xlnx_zynqmp_type_info);
+}
+
+type_init(xlnx_zynqmp_register_types)
diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h
new file mode 100644
index 0000000..62f6b6f
--- /dev/null
+++ b/include/hw/arm/xlnx-zynqmp.h
@@ -0,0 +1,38 @@
+/*
+ * Xilinx Zynq MPSoC emulation
+ *
+ * Copyright (C) 2015 Xilinx Inc
+ * Written by Peter Crosthwaite <peter.crosthwaite@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#ifndef XLNX_ZYNQMP_H
+
+#include "qemu-common.h"
+#include "hw/arm/arm.h"
+
+#define TYPE_XLNX_ZYNQMP "xlnx,zynqmp"
+#define XLNX_ZYNQMP(obj) OBJECT_CHECK(XlnxZynqMPState, (obj), \
+                                       TYPE_XLNX_ZYNQMP)
+
+#define XLNX_ZYNQMP_NUM_CPUS 4
+
+typedef struct XlnxZynqMPState {
+    /*< private >*/
+    DeviceState parent_obj;
+
+    /*< public >*/
+    ARMCPU cpu[XLNX_ZYNQMP_NUM_CPUS];
+}  XlnxZynqMPState;
+
+#define XLNX_ZYNQMP_H
+#endif
-- 
2.3.6.3.g2cc70ee

[Qemu-devel] [PATCH target-arm v5 05/14] arm: xlnx-zynqmp: Connect CPU Timers to GIC

[Peter Crosthwaite]

Connect the GPIO outputs from the individual CPUs for the timers to the
GIC.

Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
---
changed since v4:
Use macro for GIC_INTERNAL

 hw/arm/xlnx-zynqmp.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
index 30c52ae..805ba0d 100644
--- a/hw/arm/xlnx-zynqmp.c
+++ b/hw/arm/xlnx-zynqmp.c
@@ -16,13 +16,22 @@
  */
 
 #include "hw/arm/xlnx-zynqmp.h"
+#include "hw/intc/arm_gic_common.h"
 
 #define GIC_NUM_SPI_INTR 128
 
+#define ARM_PHYS_TIMER_PPI  30
+#define ARM_VIRT_TIMER_PPI  27
+
 #define GIC_BASE_ADDR       0xf9000000
 #define GIC_DIST_ADDR       0xf9010000
 #define GIC_CPU_ADDR        0xf9020000
 
+static inline int arm_gic_ppi_index(int cpu_nr, int ppi_index)
+{
+    return GIC_NUM_SPI_INTR + cpu_nr * GIC_INTERNAL + ppi_index;
+}
+
 static void xlnx_zynqmp_init(Object *obj)
 {
     XlnxZynqMPState *s = XLNX_ZYNQMP(obj);
@@ -57,6 +66,8 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 1, GIC_CPU_ADDR);
 
     for (i = 0; i < XLNX_ZYNQMP_NUM_CPUS; i++) {
+        qemu_irq irq;
+
         object_property_set_int(OBJECT(&s->cpu[i]), QEMU_PSCI_CONDUIT_SMC,
                                 "psci-conduit", &error_abort);
         if (i > 0) {
@@ -86,6 +97,12 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
 
         sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i,
                            qdev_get_gpio_in(DEVICE(&s->cpu[i]), ARM_CPU_IRQ));
+        irq = qdev_get_gpio_in(DEVICE(&s->gic),
+                               arm_gic_ppi_index(i, ARM_PHYS_TIMER_PPI));
+        qdev_connect_gpio_out(DEVICE(&s->cpu[i]), 0, irq);
+        irq = qdev_get_gpio_in(DEVICE(&s->gic),
+                               arm_gic_ppi_index(i, ARM_VIRT_TIMER_PPI));
+        qdev_connect_gpio_out(DEVICE(&s->cpu[i]), 1, irq);
     }
 }
 
-- 
2.3.6.3.g2cc70ee

[Qemu-devel] [PATCH target-arm v5 04/14] arm: xlnx-zynqmp: Add GIC

[Peter Crosthwaite]

Add the GIC and connect IRQ outputs to the CPUs.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
---
changed since v5:
Make commit msg body standalone
Add reset-cbar configuration

 hw/arm/xlnx-zynqmp.c         | 30 ++++++++++++++++++++++++++++++
 include/hw/arm/xlnx-zynqmp.h |  2 ++
 2 files changed, 32 insertions(+)

diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
index daeec0e..30c52ae 100644
--- a/hw/arm/xlnx-zynqmp.c
+++ b/hw/arm/xlnx-zynqmp.c
@@ -17,6 +17,12 @@
 
 #include "hw/arm/xlnx-zynqmp.h"
 
+#define GIC_NUM_SPI_INTR 128
+
+#define GIC_BASE_ADDR       0xf9000000
+#define GIC_DIST_ADDR       0xf9010000
+#define GIC_CPU_ADDR        0xf9020000
+
 static void xlnx_zynqmp_init(Object *obj)
 {
     XlnxZynqMPState *s = XLNX_ZYNQMP(obj);
@@ -28,6 +34,9 @@ static void xlnx_zynqmp_init(Object *obj)
         object_property_add_child(obj, "cpu[*]", OBJECT(&s->cpu[i]),
                                   &error_abort);
     }
+
+    object_initialize(&s->gic, sizeof(s->gic), TYPE_ARM_GIC);
+    qdev_set_parent_bus(DEVICE(&s->gic), sysbus_get_default());
 }
 
 static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
@@ -36,6 +45,17 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
     uint8_t i;
     Error *err = NULL;
 
+    qdev_prop_set_uint32(DEVICE(&s->gic), "num-irq", GIC_NUM_SPI_INTR + 32);
+    qdev_prop_set_uint32(DEVICE(&s->gic), "revision", 2);
+    qdev_prop_set_uint32(DEVICE(&s->gic), "num-cpu", XLNX_ZYNQMP_NUM_CPUS);
+    object_property_set_bool(OBJECT(&s->gic), true, "realized", &err);
+    if (err) {
+        error_propagate((errp), (err));
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 0, GIC_DIST_ADDR);
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 1, GIC_CPU_ADDR);
+
     for (i = 0; i < XLNX_ZYNQMP_NUM_CPUS; i++) {
         object_property_set_int(OBJECT(&s->cpu[i]), QEMU_PSCI_CONDUIT_SMC,
                                 "psci-conduit", &error_abort);
@@ -51,11 +71,21 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
             return;
         }
 
+        object_property_set_int(OBJECT(&s->cpu[i]), GIC_BASE_ADDR,
+                                "reset-cbar", &err);
+        if (err) {
+            error_propagate((errp), (err));
+            return;
+        }
+
         object_property_set_bool(OBJECT(&s->cpu[i]), true, "realized", &err);
         if (err) {
             error_propagate((errp), (err));
             return;
         }
+
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i,
+                           qdev_get_gpio_in(DEVICE(&s->cpu[i]), ARM_CPU_IRQ));
     }
 }
 
diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h
index 62f6b6f..08a8547 100644
--- a/include/hw/arm/xlnx-zynqmp.h
+++ b/include/hw/arm/xlnx-zynqmp.h
@@ -19,6 +19,7 @@
 
 #include "qemu-common.h"
 #include "hw/arm/arm.h"
+#include "hw/intc/arm_gic.h"
 
 #define TYPE_XLNX_ZYNQMP "xlnx,zynqmp"
 #define XLNX_ZYNQMP(obj) OBJECT_CHECK(XlnxZynqMPState, (obj), \
@@ -32,6 +33,7 @@ typedef struct XlnxZynqMPState {
 
     /*< public >*/
     ARMCPU cpu[XLNX_ZYNQMP_NUM_CPUS];
+    GICState gic;
 }  XlnxZynqMPState;
 
 #define XLNX_ZYNQMP_H
-- 
2.3.6.3.g2cc70ee

[Qemu-devel] [PATCH target-arm v5 07/14] net: cadence_gem: Split state struct and type into header

[Peter Crosthwaite]

Create a new header for Cadence GEM to allow using the device with
modern SoC programming conventions. The state struct needs to be
visible to embed the device in SoC containers.

Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
---
changed since v4:
Added (c) information
Make commit msg body self contained
changed since v1:
Fix /* Public */ comment spacing (Alistair review)

 hw/net/cadence_gem.c         | 43 +-------------------------
 include/hw/net/cadence_gem.h | 73 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 74 insertions(+), 42 deletions(-)
 create mode 100644 include/hw/net/cadence_gem.h

diff --git a/hw/net/cadence_gem.c b/hw/net/cadence_gem.c
index 5994306..dafe914 100644
--- a/hw/net/cadence_gem.c
+++ b/hw/net/cadence_gem.c
@@ -24,8 +24,7 @@
 
 #include <zlib.h> /* For crc32 */
 
-#include "hw/sysbus.h"
-#include "net/net.h"
+#include "hw/net/cadence_gem.h"
 #include "net/checksum.h"
 
 #ifdef CADENCE_GEM_ERR_DEBUG
@@ -141,8 +140,6 @@
 #define GEM_DESCONF6      (0x00000294/4)
 #define GEM_DESCONF7      (0x00000298/4)
 
-#define CADENCE_GEM_MAXREG        (0x00000640/4) /* Last valid GEM address */
-
 /*****************************************/
 #define GEM_NWCTRL_TXSTART     0x00000200 /* Transmit Enable */
 #define GEM_NWCTRL_TXENA       0x00000008 /* Transmit Enable */
@@ -349,44 +346,6 @@ static inline void rx_desc_set_sar(unsigned *desc, int sar_idx)
     desc[1] |= R_DESC_1_RX_SAR_MATCH;
 }
 
-#define TYPE_CADENCE_GEM "cadence_gem"
-#define CADENCE_GEM(obj) OBJECT_CHECK(CadenceGEMState, (obj), TYPE_CADENCE_GEM)
-
-typedef struct CadenceGEMState {
-    SysBusDevice parent_obj;
-
-    MemoryRegion iomem;
-    NICState *nic;
-    NICConf conf;
-    qemu_irq irq;
-
-    /* GEM registers backing store */
-    uint32_t regs[CADENCE_GEM_MAXREG];
-    /* Mask of register bits which are write only */
-    uint32_t regs_wo[CADENCE_GEM_MAXREG];
-    /* Mask of register bits which are read only */
-    uint32_t regs_ro[CADENCE_GEM_MAXREG];
-    /* Mask of register bits which are clear on read */
-    uint32_t regs_rtc[CADENCE_GEM_MAXREG];
-    /* Mask of register bits which are write 1 to clear */
-    uint32_t regs_w1c[CADENCE_GEM_MAXREG];
-
-    /* PHY registers backing store */
-    uint16_t phy_regs[32];
-
-    uint8_t phy_loop; /* Are we in phy loopback? */
-
-    /* The current DMA descriptor pointers */
-    uint32_t rx_desc_addr;
-    uint32_t tx_desc_addr;
-
-    uint8_t can_rx_state; /* Debug only */
-
-    unsigned rx_desc[2];
-
-    bool sar_active[4];
-} CadenceGEMState;
-
 /* The broadcast MAC address: 0xFFFFFFFFFFFF */
 static const uint8_t broadcast_addr[] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
 
diff --git a/include/hw/net/cadence_gem.h b/include/hw/net/cadence_gem.h
new file mode 100644
index 0000000..f2e08e3
--- /dev/null
+++ b/include/hw/net/cadence_gem.h
@@ -0,0 +1,73 @@
+/*
+ * QEMU Cadence GEM emulation
+ *
+ * Copyright (c) 2011 Xilinx, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef CADENCE_GEM_H
+
+#define TYPE_CADENCE_GEM "cadence_gem"
+#define CADENCE_GEM(obj) OBJECT_CHECK(CadenceGEMState, (obj), TYPE_CADENCE_GEM)
+
+#include "net/net.h"
+#include "hw/sysbus.h"
+
+#define CADENCE_GEM_MAXREG        (0x00000640/4) /* Last valid GEM address */
+
+typedef struct CadenceGEMState {
+    /*< private >*/
+    SysBusDevice parent_obj;
+
+    /*< public >*/
+    MemoryRegion iomem;
+    NICState *nic;
+    NICConf conf;
+    qemu_irq irq;
+
+    /* GEM registers backing store */
+    uint32_t regs[CADENCE_GEM_MAXREG];
+    /* Mask of register bits which are write only */
+    uint32_t regs_wo[CADENCE_GEM_MAXREG];
+    /* Mask of register bits which are read only */
+    uint32_t regs_ro[CADENCE_GEM_MAXREG];
+    /* Mask of register bits which are clear on read */
+    uint32_t regs_rtc[CADENCE_GEM_MAXREG];
+    /* Mask of register bits which are write 1 to clear */
+    uint32_t regs_w1c[CADENCE_GEM_MAXREG];
+
+    /* PHY registers backing store */
+    uint16_t phy_regs[32];
+
+    uint8_t phy_loop; /* Are we in phy loopback? */
+
+    /* The current DMA descriptor pointers */
+    uint32_t rx_desc_addr;
+    uint32_t tx_desc_addr;
+
+    uint8_t can_rx_state; /* Debug only */
+
+    unsigned rx_desc[2];
+
+    bool sar_active[4];
+} CadenceGEMState;
+
+#define CADENCE_GEM_H
+#endif
-- 
2.3.6.3.g2cc70ee

[Qemu-devel] [PATCH target-arm v5 06/14] net: cadence_gem: Clean up variable names

[Peter Crosthwaite]

Cleanup some variable names in preparation for migrating the state
struct and type cast macro to a public header. The acronym "GEM" on
its own is not specific enough to be used in a more global namespace
so preface with "cadence". Fix the capitalisation of "gem" in the
state type while touching the typename. Also preface the GEM_MAXREG
macro as this will need to migrate to public header.

Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
---
changed since v5:
Make commit message body standalone

 hw/net/cadence_gem.c | 70 ++++++++++++++++++++++++++--------------------------
 1 file changed, 35 insertions(+), 35 deletions(-)

diff --git a/hw/net/cadence_gem.c b/hw/net/cadence_gem.c
index 55b6293..5994306 100644
--- a/hw/net/cadence_gem.c
+++ b/hw/net/cadence_gem.c
@@ -141,7 +141,7 @@
 #define GEM_DESCONF6      (0x00000294/4)
 #define GEM_DESCONF7      (0x00000298/4)
 
-#define GEM_MAXREG        (0x00000640/4) /* Last valid GEM address */
+#define CADENCE_GEM_MAXREG        (0x00000640/4) /* Last valid GEM address */
 
 /*****************************************/
 #define GEM_NWCTRL_TXSTART     0x00000200 /* Transmit Enable */
@@ -350,9 +350,9 @@ static inline void rx_desc_set_sar(unsigned *desc, int sar_idx)
 }
 
 #define TYPE_CADENCE_GEM "cadence_gem"
-#define GEM(obj) OBJECT_CHECK(GemState, (obj), TYPE_CADENCE_GEM)
+#define CADENCE_GEM(obj) OBJECT_CHECK(CadenceGEMState, (obj), TYPE_CADENCE_GEM)
 
-typedef struct GemState {
+typedef struct CadenceGEMState {
     SysBusDevice parent_obj;
 
     MemoryRegion iomem;
@@ -361,15 +361,15 @@ typedef struct GemState {
     qemu_irq irq;
 
     /* GEM registers backing store */
-    uint32_t regs[GEM_MAXREG];
+    uint32_t regs[CADENCE_GEM_MAXREG];
     /* Mask of register bits which are write only */
-    uint32_t regs_wo[GEM_MAXREG];
+    uint32_t regs_wo[CADENCE_GEM_MAXREG];
     /* Mask of register bits which are read only */
-    uint32_t regs_ro[GEM_MAXREG];
+    uint32_t regs_ro[CADENCE_GEM_MAXREG];
     /* Mask of register bits which are clear on read */
-    uint32_t regs_rtc[GEM_MAXREG];
+    uint32_t regs_rtc[CADENCE_GEM_MAXREG];
     /* Mask of register bits which are write 1 to clear */
-    uint32_t regs_w1c[GEM_MAXREG];
+    uint32_t regs_w1c[CADENCE_GEM_MAXREG];
 
     /* PHY registers backing store */
     uint16_t phy_regs[32];
@@ -385,7 +385,7 @@ typedef struct GemState {
     unsigned rx_desc[2];
 
     bool sar_active[4];
-} GemState;
+} CadenceGEMState;
 
 /* The broadcast MAC address: 0xFFFFFFFFFFFF */
 static const uint8_t broadcast_addr[] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
@@ -395,7 +395,7 @@ static const uint8_t broadcast_addr[] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
  * One time initialization.
  * Set masks to identify which register bits have magical clear properties
  */
-static void gem_init_register_masks(GemState *s)
+static void gem_init_register_masks(CadenceGEMState *s)
 {
     /* Mask of register bits which are read only */
     memset(&s->regs_ro[0], 0, sizeof(s->regs_ro));
@@ -430,7 +430,7 @@ static void gem_init_register_masks(GemState *s)
  * phy_update_link:
  * Make the emulated PHY link state match the QEMU "interface" state.
  */
-static void phy_update_link(GemState *s)
+static void phy_update_link(CadenceGEMState *s)
 {
     DB_PRINT("down %d\n", qemu_get_queue(s->nic)->link_down);
 
@@ -450,7 +450,7 @@ static void phy_update_link(GemState *s)
 
 static int gem_can_receive(NetClientState *nc)
 {
-    GemState *s;
+    CadenceGEMState *s;
 
     s = qemu_get_nic_opaque(nc);
 
@@ -483,7 +483,7 @@ static int gem_can_receive(NetClientState *nc)
  * gem_update_int_status:
  * Raise or lower interrupt based on current status.
  */
-static void gem_update_int_status(GemState *s)
+static void gem_update_int_status(CadenceGEMState *s)
 {
     if (s->regs[GEM_ISR]) {
         DB_PRINT("asserting int. (0x%08x)\n", s->regs[GEM_ISR]);
@@ -495,7 +495,7 @@ static void gem_update_int_status(GemState *s)
  * gem_receive_updatestats:
  * Increment receive statistics.
  */
-static void gem_receive_updatestats(GemState *s, const uint8_t *packet,
+static void gem_receive_updatestats(CadenceGEMState *s, const uint8_t *packet,
                                     unsigned bytes)
 {
     uint64_t octets;
@@ -586,7 +586,7 @@ static unsigned calc_mac_hash(const uint8_t *mac)
  * GEM_RM_PROMISCUOUS_ACCEPT, GEM_RX_BROADCAST_ACCEPT,
  * GEM_RX_MULTICAST_HASH_ACCEPT or GEM_RX_UNICAST_HASH_ACCEPT
  */
-static int gem_mac_address_filter(GemState *s, const uint8_t *packet)
+static int gem_mac_address_filter(CadenceGEMState *s, const uint8_t *packet)
 {
     uint8_t *gem_spaddr;
     int i;
@@ -636,7 +636,7 @@ static int gem_mac_address_filter(GemState *s, const uint8_t *packet)
     return GEM_RX_REJECT;
 }
 
-static void gem_get_rx_desc(GemState *s)
+static void gem_get_rx_desc(CadenceGEMState *s)
 {
     DB_PRINT("read descriptor 0x%x\n", (unsigned)s->rx_desc_addr);
     /* read current descriptor */
@@ -660,7 +660,7 @@ static void gem_get_rx_desc(GemState *s)
  */
 static ssize_t gem_receive(NetClientState *nc, const uint8_t *buf, size_t size)
 {
-    GemState *s;
+    CadenceGEMState *s;
     unsigned   rxbufsize, bytes_to_copy;
     unsigned   rxbuf_offset;
     uint8_t    rxbuf[2048];
@@ -810,7 +810,7 @@ static ssize_t gem_receive(NetClientState *nc, const uint8_t *buf, size_t size)
  * gem_transmit_updatestats:
  * Increment transmit statistics.
  */
-static void gem_transmit_updatestats(GemState *s, const uint8_t *packet,
+static void gem_transmit_updatestats(CadenceGEMState *s, const uint8_t *packet,
                                      unsigned bytes)
 {
     uint64_t octets;
@@ -856,7 +856,7 @@ static void gem_transmit_updatestats(GemState *s, const uint8_t *packet,
  * gem_transmit:
  * Fish packets out of the descriptor ring and feed them to QEMU
  */
-static void gem_transmit(GemState *s)
+static void gem_transmit(CadenceGEMState *s)
 {
     unsigned    desc[2];
     hwaddr packet_desc_addr;
@@ -976,7 +976,7 @@ static void gem_transmit(GemState *s)
     }
 }
 
-static void gem_phy_reset(GemState *s)
+static void gem_phy_reset(CadenceGEMState *s)
 {
     memset(&s->phy_regs[0], 0, sizeof(s->phy_regs));
     s->phy_regs[PHY_REG_CONTROL] = 0x1140;
@@ -1004,7 +1004,7 @@ static void gem_phy_reset(GemState *s)
 static void gem_reset(DeviceState *d)
 {
     int i;
-    GemState *s = GEM(d);
+    CadenceGEMState *s = CADENCE_GEM(d);
 
     DB_PRINT("\n");
 
@@ -1032,13 +1032,13 @@ static void gem_reset(DeviceState *d)
     gem_update_int_status(s);
 }
 
-static uint16_t gem_phy_read(GemState *s, unsigned reg_num)
+static uint16_t gem_phy_read(CadenceGEMState *s, unsigned reg_num)
 {
     DB_PRINT("reg: %d value: 0x%04x\n", reg_num, s->phy_regs[reg_num]);
     return s->phy_regs[reg_num];
 }
 
-static void gem_phy_write(GemState *s, unsigned reg_num, uint16_t val)
+static void gem_phy_write(CadenceGEMState *s, unsigned reg_num, uint16_t val)
 {
     DB_PRINT("reg: %d value: 0x%04x\n", reg_num, val);
 
@@ -1072,10 +1072,10 @@ static void gem_phy_write(GemState *s, unsigned reg_num, uint16_t val)
  */
 static uint64_t gem_read(void *opaque, hwaddr offset, unsigned size)
 {
-    GemState *s;
+    CadenceGEMState *s;
     uint32_t retval;
 
-    s = (GemState *)opaque;
+    s = (CadenceGEMState *)opaque;
 
     offset >>= 2;
     retval = s->regs[offset];
@@ -1120,7 +1120,7 @@ static uint64_t gem_read(void *opaque, hwaddr offset, unsigned size)
 static void gem_write(void *opaque, hwaddr offset, uint64_t val,
         unsigned size)
 {
-    GemState *s = (GemState *)opaque;
+    CadenceGEMState *s = (CadenceGEMState *)opaque;
     uint32_t readonly;
 
     DB_PRINT("offset: 0x%04x write: 0x%08x ", (unsigned)offset, (unsigned)val);
@@ -1226,7 +1226,7 @@ static NetClientInfo net_gem_info = {
 static int gem_init(SysBusDevice *sbd)
 {
     DeviceState *dev = DEVICE(sbd);
-    GemState *s = GEM(dev);
+    CadenceGEMState *s = CADENCE_GEM(dev);
 
     DB_PRINT("\n");
 
@@ -1248,18 +1248,18 @@ static const VMStateDescription vmstate_cadence_gem = {
     .version_id = 2,
     .minimum_version_id = 2,
     .fields = (VMStateField[]) {
-        VMSTATE_UINT32_ARRAY(regs, GemState, GEM_MAXREG),
-        VMSTATE_UINT16_ARRAY(phy_regs, GemState, 32),
-        VMSTATE_UINT8(phy_loop, GemState),
-        VMSTATE_UINT32(rx_desc_addr, GemState),
-        VMSTATE_UINT32(tx_desc_addr, GemState),
-        VMSTATE_BOOL_ARRAY(sar_active, GemState, 4),
+        VMSTATE_UINT32_ARRAY(regs, CadenceGEMState, CADENCE_GEM_MAXREG),
+        VMSTATE_UINT16_ARRAY(phy_regs, CadenceGEMState, 32),
+        VMSTATE_UINT8(phy_loop, CadenceGEMState),
+        VMSTATE_UINT32(rx_desc_addr, CadenceGEMState),
+        VMSTATE_UINT32(tx_desc_addr, CadenceGEMState),
+        VMSTATE_BOOL_ARRAY(sar_active, CadenceGEMState, 4),
         VMSTATE_END_OF_LIST(),
     }
 };
 
 static Property gem_properties[] = {
-    DEFINE_NIC_PROPERTIES(GemState, conf),
+    DEFINE_NIC_PROPERTIES(CadenceGEMState, conf),
     DEFINE_PROP_END_OF_LIST(),
 };
 
@@ -1277,7 +1277,7 @@ static void gem_class_init(ObjectClass *klass, void *data)
 static const TypeInfo gem_info = {
     .name  = TYPE_CADENCE_GEM,
     .parent = TYPE_SYS_BUS_DEVICE,
-    .instance_size  = sizeof(GemState),
+    .instance_size  = sizeof(CadenceGEMState),
     .class_init = gem_class_init,
 };
 
-- 
2.3.6.3.g2cc70ee

[Qemu-devel] [PATCH target-arm v5 10/14] char: cadence_uart: Split state struct and type into header

[Peter Crosthwaite]

Create a new header for Cadence UART to allow using the device with
modern SoC programming conventions. The state struct needs to be
visible to embed the device in SoC containers.

Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
---
changed since v4 (PMM review):
remove include guard _
Add (c) info to header
Make commit msg body standalone
changed since v1:
Fix /* Public */ comment spacing (Alistair review)

 hw/char/cadence_uart.c         | 29 +----------------------
 include/hw/char/cadence_uart.h | 53 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 54 insertions(+), 28 deletions(-)
 create mode 100644 include/hw/char/cadence_uart.h

diff --git a/hw/char/cadence_uart.c b/hw/char/cadence_uart.c
index 4a4d3eb..9d379e5 100644
--- a/hw/char/cadence_uart.c
+++ b/hw/char/cadence_uart.c
@@ -16,9 +16,7 @@
  * with this program; if not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "hw/sysbus.h"
-#include "sysemu/char.h"
-#include "qemu/timer.h"
+#include "hw/char/cadence_uart.h"
 
 #ifdef CADENCE_UART_ERR_DEBUG
 #define DB_PRINT(...) do { \
@@ -85,8 +83,6 @@
 #define LOCAL_LOOPBACK         (0x2 << UART_MR_CHMODE_SH)
 #define REMOTE_LOOPBACK        (0x3 << UART_MR_CHMODE_SH)
 
-#define CADENCE_UART_RX_FIFO_SIZE           16
-#define CADENCE_UART_TX_FIFO_SIZE           16
 #define UART_INPUT_CLK         50000000
 
 #define R_CR       (0x00/4)
@@ -108,29 +104,6 @@
 #define R_PWID     (0x40/4)
 #define R_TTRIG    (0x44/4)
 
-#define CADENCE_UART_R_MAX (0x48/4)
-
-#define TYPE_CADENCE_UART "cadence_uart"
-#define CADENCE_UART(obj) OBJECT_CHECK(CadenceUARTState, (obj), \
-                                       TYPE_CADENCE_UART)
-
-typedef struct {
-    /*< private >*/
-    SysBusDevice parent_obj;
-    /*< public >*/
-
-    MemoryRegion iomem;
-    uint32_t r[CADENCE_UART_R_MAX];
-    uint8_t rx_fifo[CADENCE_UART_RX_FIFO_SIZE];
-    uint8_t tx_fifo[CADENCE_UART_TX_FIFO_SIZE];
-    uint32_t rx_wpos;
-    uint32_t rx_count;
-    uint32_t tx_count;
-    uint64_t char_tx_time;
-    CharDriverState *chr;
-    qemu_irq irq;
-    QEMUTimer *fifo_trigger_handle;
-} CadenceUARTState;
 
 static void uart_update_status(CadenceUARTState *s)
 {
diff --git a/include/hw/char/cadence_uart.h b/include/hw/char/cadence_uart.h
new file mode 100644
index 0000000..6310f52
--- /dev/null
+++ b/include/hw/char/cadence_uart.h
@@ -0,0 +1,53 @@
+/*
+ * Device model for Cadence UART
+ *
+ * Copyright (c) 2010 Xilinx Inc.
+ * Copyright (c) 2012 Peter A.G. Crosthwaite (peter.crosthwaite@petalogix.com)
+ * Copyright (c) 2012 PetaLogix Pty Ltd.
+ * Written by Haibing Ma
+ *            M.Habib
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CADENCE_UART_H
+
+#include "hw/sysbus.h"
+#include "sysemu/char.h"
+#include "qemu/timer.h"
+
+#define CADENCE_UART_RX_FIFO_SIZE           16
+#define CADENCE_UART_TX_FIFO_SIZE           16
+
+#define CADENCE_UART_R_MAX (0x48/4)
+
+#define TYPE_CADENCE_UART "cadence_uart"
+#define CADENCE_UART(obj) OBJECT_CHECK(CadenceUARTState, (obj), \
+                                       TYPE_CADENCE_UART)
+
+typedef struct {
+    /*< private >*/
+    SysBusDevice parent_obj;
+
+    /*< public >*/
+    MemoryRegion iomem;
+    uint32_t r[CADENCE_UART_R_MAX];
+    uint8_t rx_fifo[CADENCE_UART_RX_FIFO_SIZE];
+    uint8_t tx_fifo[CADENCE_UART_TX_FIFO_SIZE];
+    uint32_t rx_wpos;
+    uint32_t rx_count;
+    uint32_t tx_count;
+    uint64_t char_tx_time;
+    CharDriverState *chr;
+    qemu_irq irq;
+    QEMUTimer *fifo_trigger_handle;
+} CadenceUARTState;
+
+#define CADENCE_UART_H
+#endif
-- 
2.3.6.3.g2cc70ee

[Qemu-devel] [PATCH target-arm v5 09/14] char: cadence_uart: Clean up variable names

[Peter Crosthwaite]

Clean up some variable names in preparation for migrating the state struct
and type cast macro to a public header. The acronym "UART" on it's own is
not specific enough to be used in a more global namespace so preface with
"cadence". Fix the capitalisation of "uart" in the state type while touching
the typename. Preface macros used by the state struct itself with CADENCE_UART
so they don't conflict in namespace either.

Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
---
Changed since v4:
Make commit message body self contained.

 hw/char/cadence_uart.c | 102 ++++++++++++++++++++++++++-----------------------
 1 file changed, 54 insertions(+), 48 deletions(-)

diff --git a/hw/char/cadence_uart.c b/hw/char/cadence_uart.c
index d145378..4a4d3eb 100644
--- a/hw/char/cadence_uart.c
+++ b/hw/char/cadence_uart.c
@@ -85,8 +85,8 @@
 #define LOCAL_LOOPBACK         (0x2 << UART_MR_CHMODE_SH)
 #define REMOTE_LOOPBACK        (0x3 << UART_MR_CHMODE_SH)
 
-#define RX_FIFO_SIZE           16
-#define TX_FIFO_SIZE           16
+#define CADENCE_UART_RX_FIFO_SIZE           16
+#define CADENCE_UART_TX_FIFO_SIZE           16
 #define UART_INPUT_CLK         50000000
 
 #define R_CR       (0x00/4)
@@ -108,10 +108,11 @@
 #define R_PWID     (0x40/4)
 #define R_TTRIG    (0x44/4)
 
-#define R_MAX (R_TTRIG + 1)
+#define CADENCE_UART_R_MAX (0x48/4)
 
 #define TYPE_CADENCE_UART "cadence_uart"
-#define CADENCE_UART(obj) OBJECT_CHECK(UartState, (obj), TYPE_CADENCE_UART)
+#define CADENCE_UART(obj) OBJECT_CHECK(CadenceUARTState, (obj), \
+                                       TYPE_CADENCE_UART)
 
 typedef struct {
     /*< private >*/
@@ -119,9 +120,9 @@ typedef struct {
     /*< public >*/
 
     MemoryRegion iomem;
-    uint32_t r[R_MAX];
-    uint8_t rx_fifo[RX_FIFO_SIZE];
-    uint8_t tx_fifo[TX_FIFO_SIZE];
+    uint32_t r[CADENCE_UART_R_MAX];
+    uint8_t rx_fifo[CADENCE_UART_RX_FIFO_SIZE];
+    uint8_t tx_fifo[CADENCE_UART_TX_FIFO_SIZE];
     uint32_t rx_wpos;
     uint32_t rx_count;
     uint32_t tx_count;
@@ -129,17 +130,19 @@ typedef struct {
     CharDriverState *chr;
     qemu_irq irq;
     QEMUTimer *fifo_trigger_handle;
-} UartState;
+} CadenceUARTState;
 
-static void uart_update_status(UartState *s)
+static void uart_update_status(CadenceUARTState *s)
 {
     s->r[R_SR] = 0;
 
-    s->r[R_SR] |= s->rx_count == RX_FIFO_SIZE ? UART_SR_INTR_RFUL : 0;
+    s->r[R_SR] |= s->rx_count == CADENCE_UART_RX_FIFO_SIZE ? UART_SR_INTR_RFUL
+                                                           : 0;
     s->r[R_SR] |= !s->rx_count ? UART_SR_INTR_REMPTY : 0;
     s->r[R_SR] |= s->rx_count >= s->r[R_RTRIG] ? UART_SR_INTR_RTRIG : 0;
 
-    s->r[R_SR] |= s->tx_count == TX_FIFO_SIZE ? UART_SR_INTR_TFUL : 0;
+    s->r[R_SR] |= s->tx_count == CADENCE_UART_TX_FIFO_SIZE ? UART_SR_INTR_TFUL
+                                                           : 0;
     s->r[R_SR] |= !s->tx_count ? UART_SR_INTR_TEMPTY : 0;
     s->r[R_SR] |= s->tx_count >= s->r[R_TTRIG] ? UART_SR_TTRIG : 0;
 
@@ -150,14 +153,14 @@ static void uart_update_status(UartState *s)
 
 static void fifo_trigger_update(void *opaque)
 {
-    UartState *s = (UartState *)opaque;
+    CadenceUARTState *s = opaque;
 
     s->r[R_CISR] |= UART_INTR_TIMEOUT;
 
     uart_update_status(s);
 }
 
-static void uart_rx_reset(UartState *s)
+static void uart_rx_reset(CadenceUARTState *s)
 {
     s->rx_wpos = 0;
     s->rx_count = 0;
@@ -166,12 +169,12 @@ static void uart_rx_reset(UartState *s)
     }
 }
 
-static void uart_tx_reset(UartState *s)
+static void uart_tx_reset(CadenceUARTState *s)
 {
     s->tx_count = 0;
 }
 
-static void uart_send_breaks(UartState *s)
+static void uart_send_breaks(CadenceUARTState *s)
 {
     int break_enabled = 1;
 
@@ -181,7 +184,7 @@ static void uart_send_breaks(UartState *s)
     }
 }
 
-static void uart_parameters_setup(UartState *s)
+static void uart_parameters_setup(CadenceUARTState *s)
 {
     QEMUSerialSetParams ssp;
     unsigned int baud_rate, packet_size;
@@ -236,20 +239,20 @@ static void uart_parameters_setup(UartState *s)
 
 static int uart_can_receive(void *opaque)
 {
-    UartState *s = (UartState *)opaque;
-    int ret = MAX(RX_FIFO_SIZE, TX_FIFO_SIZE);
+    CadenceUARTState *s = opaque;
+    int ret = MAX(CADENCE_UART_RX_FIFO_SIZE, CADENCE_UART_TX_FIFO_SIZE);
     uint32_t ch_mode = s->r[R_MR] & UART_MR_CHMODE;
 
     if (ch_mode == NORMAL_MODE || ch_mode == ECHO_MODE) {
-        ret = MIN(ret, RX_FIFO_SIZE - s->rx_count);
+        ret = MIN(ret, CADENCE_UART_RX_FIFO_SIZE - s->rx_count);
     }
     if (ch_mode == REMOTE_LOOPBACK || ch_mode == ECHO_MODE) {
-        ret = MIN(ret, TX_FIFO_SIZE - s->tx_count);
+        ret = MIN(ret, CADENCE_UART_TX_FIFO_SIZE - s->tx_count);
     }
     return ret;
 }
 
-static void uart_ctrl_update(UartState *s)
+static void uart_ctrl_update(CadenceUARTState *s)
 {
     if (s->r[R_CR] & UART_CR_TXRST) {
         uart_tx_reset(s);
@@ -268,7 +271,7 @@ static void uart_ctrl_update(UartState *s)
 
 static void uart_write_rx_fifo(void *opaque, const uint8_t *buf, int size)
 {
-    UartState *s = (UartState *)opaque;
+    CadenceUARTState *s = opaque;
     uint64_t new_rx_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
     int i;
 
@@ -276,12 +279,12 @@ static void uart_write_rx_fifo(void *opaque, const uint8_t *buf, int size)
         return;
     }
 
-    if (s->rx_count == RX_FIFO_SIZE) {
+    if (s->rx_count == CADENCE_UART_RX_FIFO_SIZE) {
         s->r[R_CISR] |= UART_INTR_ROVR;
     } else {
         for (i = 0; i < size; i++) {
             s->rx_fifo[s->rx_wpos] = buf[i];
-            s->rx_wpos = (s->rx_wpos + 1) % RX_FIFO_SIZE;
+            s->rx_wpos = (s->rx_wpos + 1) % CADENCE_UART_RX_FIFO_SIZE;
             s->rx_count++;
         }
         timer_mod(s->fifo_trigger_handle, new_rx_time +
@@ -293,7 +296,7 @@ static void uart_write_rx_fifo(void *opaque, const uint8_t *buf, int size)
 static gboolean cadence_uart_xmit(GIOChannel *chan, GIOCondition cond,
                                   void *opaque)
 {
-    UartState *s = opaque;
+    CadenceUARTState *s = opaque;
     int ret;
 
     /* instant drain the fifo when there's no back-end */
@@ -320,14 +323,15 @@ static gboolean cadence_uart_xmit(GIOChannel *chan, GIOCondition cond,
     return FALSE;
 }
 
-static void uart_write_tx_fifo(UartState *s, const uint8_t *buf, int size)
+static void uart_write_tx_fifo(CadenceUARTState *s, const uint8_t *buf,
+                               int size)
 {
     if ((s->r[R_CR] & UART_CR_TX_DIS) || !(s->r[R_CR] & UART_CR_TX_EN)) {
         return;
     }
 
-    if (size > TX_FIFO_SIZE - s->tx_count) {
-        size = TX_FIFO_SIZE - s->tx_count;
+    if (size > CADENCE_UART_TX_FIFO_SIZE - s->tx_count) {
+        size = CADENCE_UART_TX_FIFO_SIZE - s->tx_count;
         /*
          * This can only be a guest error via a bad tx fifo register push,
          * as can_receive() should stop remote loop and echo modes ever getting
@@ -345,7 +349,7 @@ static void uart_write_tx_fifo(UartState *s, const uint8_t *buf, int size)
 
 static void uart_receive(void *opaque, const uint8_t *buf, int size)
 {
-    UartState *s = (UartState *)opaque;
+    CadenceUARTState *s = opaque;
     uint32_t ch_mode = s->r[R_MR] & UART_MR_CHMODE;
 
     if (ch_mode == NORMAL_MODE || ch_mode == ECHO_MODE) {
@@ -358,7 +362,7 @@ static void uart_receive(void *opaque, const uint8_t *buf, int size)
 
 static void uart_event(void *opaque, int event)
 {
-    UartState *s = (UartState *)opaque;
+    CadenceUARTState *s = opaque;
     uint8_t buf = '\0';
 
     if (event == CHR_EVENT_BREAK) {
@@ -368,15 +372,15 @@ static void uart_event(void *opaque, int event)
     uart_update_status(s);
 }
 
-static void uart_read_rx_fifo(UartState *s, uint32_t *c)
+static void uart_read_rx_fifo(CadenceUARTState *s, uint32_t *c)
 {
     if ((s->r[R_CR] & UART_CR_RX_DIS) || !(s->r[R_CR] & UART_CR_RX_EN)) {
         return;
     }
 
     if (s->rx_count) {
-        uint32_t rx_rpos =
-                (RX_FIFO_SIZE + s->rx_wpos - s->rx_count) % RX_FIFO_SIZE;
+        uint32_t rx_rpos = (CADENCE_UART_RX_FIFO_SIZE + s->rx_wpos -
+                            s->rx_count) % CADENCE_UART_RX_FIFO_SIZE;
         *c = s->rx_fifo[rx_rpos];
         s->rx_count--;
 
@@ -393,7 +397,7 @@ static void uart_read_rx_fifo(UartState *s, uint32_t *c)
 static void uart_write(void *opaque, hwaddr offset,
                           uint64_t value, unsigned size)
 {
-    UartState *s = (UartState *)opaque;
+    CadenceUARTState *s = opaque;
 
     DB_PRINT(" offset:%x data:%08x\n", (unsigned)offset, (unsigned)value);
     offset >>= 2;
@@ -437,11 +441,11 @@ static void uart_write(void *opaque, hwaddr offset,
 static uint64_t uart_read(void *opaque, hwaddr offset,
         unsigned size)
 {
-    UartState *s = (UartState *)opaque;
+    CadenceUARTState *s = opaque;
     uint32_t c = 0;
 
     offset >>= 2;
-    if (offset >= R_MAX) {
+    if (offset >= CADENCE_UART_R_MAX) {
         c = 0;
     } else if (offset == R_TX_RX) {
         uart_read_rx_fifo(s, &c);
@@ -461,7 +465,7 @@ static const MemoryRegionOps uart_ops = {
 
 static void cadence_uart_reset(DeviceState *dev)
 {
-    UartState *s = CADENCE_UART(dev);
+    CadenceUARTState *s = CADENCE_UART(dev);
 
     s->r[R_CR] = 0x00000128;
     s->r[R_IMR] = 0;
@@ -478,7 +482,7 @@ static void cadence_uart_reset(DeviceState *dev)
 
 static void cadence_uart_realize(DeviceState *dev, Error **errp)
 {
-    UartState *s = CADENCE_UART(dev);
+    CadenceUARTState *s = CADENCE_UART(dev);
 
     s->fifo_trigger_handle = timer_new_ns(QEMU_CLOCK_VIRTUAL,
                                           fifo_trigger_update, s);
@@ -495,7 +499,7 @@ static void cadence_uart_realize(DeviceState *dev, Error **errp)
 static void cadence_uart_init(Object *obj)
 {
     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
-    UartState *s = CADENCE_UART(obj);
+    CadenceUARTState *s = CADENCE_UART(obj);
 
     memory_region_init_io(&s->iomem, obj, &uart_ops, s, "uart", 0x1000);
     sysbus_init_mmio(sbd, &s->iomem);
@@ -506,7 +510,7 @@ static void cadence_uart_init(Object *obj)
 
 static int cadence_uart_post_load(void *opaque, int version_id)
 {
-    UartState *s = opaque;
+    CadenceUARTState *s = opaque;
 
     uart_parameters_setup(s);
     uart_update_status(s);
@@ -519,13 +523,15 @@ static const VMStateDescription vmstate_cadence_uart = {
     .minimum_version_id = 2,
     .post_load = cadence_uart_post_load,
     .fields = (VMStateField[]) {
-        VMSTATE_UINT32_ARRAY(r, UartState, R_MAX),
-        VMSTATE_UINT8_ARRAY(rx_fifo, UartState, RX_FIFO_SIZE),
-        VMSTATE_UINT8_ARRAY(tx_fifo, UartState, RX_FIFO_SIZE),
-        VMSTATE_UINT32(rx_count, UartState),
-        VMSTATE_UINT32(tx_count, UartState),
-        VMSTATE_UINT32(rx_wpos, UartState),
-        VMSTATE_TIMER_PTR(fifo_trigger_handle, UartState),
+        VMSTATE_UINT32_ARRAY(r, CadenceUARTState, CADENCE_UART_R_MAX),
+        VMSTATE_UINT8_ARRAY(rx_fifo, CadenceUARTState,
+                            CADENCE_UART_RX_FIFO_SIZE),
+        VMSTATE_UINT8_ARRAY(tx_fifo, CadenceUARTState,
+                            CADENCE_UART_TX_FIFO_SIZE),
+        VMSTATE_UINT32(rx_count, CadenceUARTState),
+        VMSTATE_UINT32(tx_count, CadenceUARTState),
+        VMSTATE_UINT32(rx_wpos, CadenceUARTState),
+        VMSTATE_TIMER_PTR(fifo_trigger_handle, CadenceUARTState),
         VMSTATE_END_OF_LIST()
     }
 };
@@ -544,7 +550,7 @@ static void cadence_uart_class_init(ObjectClass *klass, void *data)
 static const TypeInfo cadence_uart_info = {
     .name          = TYPE_CADENCE_UART,
     .parent        = TYPE_SYS_BUS_DEVICE,
-    .instance_size = sizeof(UartState),
+    .instance_size = sizeof(CadenceUARTState),
     .instance_init = cadence_uart_init,
     .class_init    = cadence_uart_class_init,
 };
-- 
2.3.6.3.g2cc70ee

[Qemu-devel] [PATCH target-arm v5 12/14] arm: Add xlnx-ep108 machine

[Peter Crosthwaite]

Add a machine model for the Xilinx ZynqMP SoC EP108 board.

Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
---
Chaned since v1:
Change board name to ep108

 hw/arm/Makefile.objs |  2 +-
 hw/arm/xlnx-ep108.c  | 53 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 54 insertions(+), 1 deletion(-)
 create mode 100644 hw/arm/xlnx-ep108.c

diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index d7cd5f4..a75a182 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -10,4 +10,4 @@ obj-$(CONFIG_DIGIC) += digic.o
 obj-y += omap1.o omap2.o strongarm.o
 obj-$(CONFIG_ALLWINNER_A10) += allwinner-a10.o cubieboard.o
 obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o
-obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp.o
+obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp.o xlnx-ep108.o
diff --git a/hw/arm/xlnx-ep108.c b/hw/arm/xlnx-ep108.c
new file mode 100644
index 0000000..81704bb
--- /dev/null
+++ b/hw/arm/xlnx-ep108.c
@@ -0,0 +1,53 @@
+/*
+ * Xilinx ZynqMP EP108 board
+ *
+ * Copyright (C) 2015 Xilinx Inc
+ * Written by Peter Crosthwaite <peter.crosthwaite@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "hw/arm/xlnx-zynqmp.h"
+#include "hw/boards.h"
+#include "qemu/error-report.h"
+
+typedef struct XlnxEP108 {
+    XlnxZynqMPState soc;
+} XlnxEP108;
+
+static void xlnx_ep108_init(MachineState *machine)
+{
+    XlnxEP108 *s = g_new0(XlnxEP108, 1);
+    Error *err = NULL;
+
+    object_initialize(&s->soc, sizeof(s->soc), TYPE_XLNX_ZYNQMP);
+    object_property_add_child(OBJECT(machine), "soc", OBJECT(&s->soc),
+                              &error_abort);
+
+    object_property_set_bool(OBJECT(&s->soc), true, "realized", &err);
+    if (err) {
+        error_report("%s", error_get_pretty(err));
+        exit(1);
+    }
+}
+
+static QEMUMachine xlnx_ep108_machine = {
+    .name = "xlnx-ep108",
+    .desc = "Xilinx ZynqMP EP108 board",
+    .init = xlnx_ep108_init,
+};
+
+static void xlnx_ep108_machine_init(void)
+{
+    qemu_register_machine(&xlnx_ep108_machine);
+}
+
+machine_init(xlnx_ep108_machine_init);
-- 
2.3.6.3.g2cc70ee

[Qemu-devel] [PATCH target-arm v5 13/14] arm: xilinx-ep108: Add external RAM

[Peter Crosthwaite]

Zynq MPSoC supports external DDR RAM. Add a RAM at 0 to the model.

Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
---
changed since v4:
Use memory_region_allocate_system_memory
Change too-small warning to be qemu_log
changed since v1:
Add ram size clamps and warnings

 hw/arm/xlnx-ep108.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/hw/arm/xlnx-ep108.c b/hw/arm/xlnx-ep108.c
index 81704bb..46f145b 100644
--- a/hw/arm/xlnx-ep108.c
+++ b/hw/arm/xlnx-ep108.c
@@ -18,11 +18,16 @@
 #include "hw/arm/xlnx-zynqmp.h"
 #include "hw/boards.h"
 #include "qemu/error-report.h"
+#include "exec/address-spaces.h"
 
 typedef struct XlnxEP108 {
     XlnxZynqMPState soc;
+    MemoryRegion ddr_ram;
 } XlnxEP108;
 
+/* Max 2GB RAM */
+#define EP108_MAX_RAM_SIZE 0x80000000ull
+
 static void xlnx_ep108_init(MachineState *machine)
 {
     XlnxEP108 *s = g_new0(XlnxEP108, 1);
@@ -37,6 +42,21 @@ static void xlnx_ep108_init(MachineState *machine)
         error_report("%s", error_get_pretty(err));
         exit(1);
     }
+
+    if (machine->ram_size > EP108_MAX_RAM_SIZE) {
+        error_report("WARNING: RAM size " RAM_ADDR_FMT " above max supported, "
+                     "reduced to %llx", machine->ram_size, EP108_MAX_RAM_SIZE);
+        machine->ram_size = EP108_MAX_RAM_SIZE;
+    }
+
+    if (machine->ram_size <= 0x08000000) {
+        qemu_log("WARNING: RAM size " RAM_ADDR_FMT " is small for EP108",
+                 machine->ram_size);
+    }
+
+    memory_region_allocate_system_memory(&s->ddr_ram, NULL, "ddr-ram",
+                                         machine->ram_size);
+    memory_region_add_subregion(get_system_memory(), 0, &s->ddr_ram);
 }
 
 static QEMUMachine xlnx_ep108_machine = {
-- 
2.3.6.3.g2cc70ee

[Qemu-devel] [PATCH target-arm v5 14/14] arm: xilinx-ep108: Add bootloading

[Peter Crosthwaite]

Add bootloader support using standard ARM bootloader.

Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
---
changed since v4:
Add loader_start field
Make commit message body standalone.

 hw/arm/xlnx-ep108.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/hw/arm/xlnx-ep108.c b/hw/arm/xlnx-ep108.c
index 46f145b..b924f5e 100644
--- a/hw/arm/xlnx-ep108.c
+++ b/hw/arm/xlnx-ep108.c
@@ -28,6 +28,8 @@ typedef struct XlnxEP108 {
 /* Max 2GB RAM */
 #define EP108_MAX_RAM_SIZE 0x80000000ull
 
+static struct arm_boot_info xlnx_ep108_binfo;
+
 static void xlnx_ep108_init(MachineState *machine)
 {
     XlnxEP108 *s = g_new0(XlnxEP108, 1);
@@ -57,6 +59,13 @@ static void xlnx_ep108_init(MachineState *machine)
     memory_region_allocate_system_memory(&s->ddr_ram, NULL, "ddr-ram",
                                          machine->ram_size);
     memory_region_add_subregion(get_system_memory(), 0, &s->ddr_ram);
+
+    xlnx_ep108_binfo.ram_size = machine->ram_size;
+    xlnx_ep108_binfo.kernel_filename = machine->kernel_filename;
+    xlnx_ep108_binfo.kernel_cmdline = machine->kernel_cmdline;
+    xlnx_ep108_binfo.initrd_filename = machine->initrd_filename;
+    xlnx_ep108_binfo.loader_start = 0;
+    arm_load_kernel(&s->soc.cpu[0], &xlnx_ep108_binfo);
 }
 
 static QEMUMachine xlnx_ep108_machine = {
-- 
2.3.6.3.g2cc70ee

Re: [Qemu-devel] [PATCH target-arm v5 00/14] Next Generation Xilinx Zynq SoC

[Peter Crosthwaite]

On Fri, Apr 24, 2015 at 12:31 PM, Peter Crosthwaite
<peter.crosthwaite@xilinx.com> wrote:
> Hi Peter and all,
>
> Xilinx's next gen SoC has been announced. This series adds a SoC and
> board.
>
> Series start with addition of ARM cortex A53 support (P1 and P2). The
> Soc skeleton is then added with GIC, EMACs and UARTs are added. The
> pre-existing models for GEM and UART are not SoC friendly (no visible
> state struct), so those are refactored for SoC.
>
> Create a model of the EP108 board. Currently this doesn't have any
> EP108 specific features but is a usable board exposing the user visible
> features of the raw SoC.
>
> See individual patches for detailed change logs.
>
> changed since v4:
> Addressed PMM and Alistair Reviews
>
> changed since v3:
> Included CPU thread kick fix
> Addressed Alistair review
>
> changed since v2:
> Fix CPU child prop adder
> Add DTS compat string
>
> changed since v1:
> Addressed Alistair review (individual changes on resp. patches)
> Changed board name to EP108
> Changed naming scheme to "zynqmp" / "ZYNQMP" (Michal review)
>
> Regards,
> Peter
>
>
> Peter Crosthwaite (14):
>   target-arm: cpu64: generalise name of A57 regs
>   target-arm: cpu64: Add support for cortex-a53
>   arm: Introduce Xilinx ZynqMP SoC
>   arm: xlnx-zynqmp: Add GIC
>   arm: xlnx-zynqmp: Connect CPU Timers to GIC
>   net: cadence_gem: Clean up variable names
>   net: cadence_gem: Split state struct and type into header
>   arm: xilinx-zynqmp: Add GEM support
>   char: cadence_uart: Clean up variable names
>   char: cadence_uart: Split state struct and type into header
>   arm: xilinx-zynqmp: Add UART support
>   arm: Add xlnx-ep108 machine
>   arm: xilinx-ep108: Add external RAM
>   arm: xilinx-ep108: Add bootloading
>
>  default-configs/aarch64-softmmu.mak |   2 +-
>  hw/arm/Makefile.objs                |   1 +
>  hw/arm/xlnx-ep108.c                 |  82 ++++++++++++++++
>  hw/arm/xlnx-zynqmp.c                | 188 ++++++++++++++++++++++++++++++++++++
>  hw/char/cadence_uart.c              | 115 +++++++++-------------
>  hw/net/cadence_gem.c                |  95 ++++++------------
>  include/hw/arm/xlnx-zynqmp.h        |  46 +++++++++
>  include/hw/char/cadence_uart.h      |  53 ++++++++++
>  include/hw/net/cadence_gem.h        |  73 ++++++++++++++
>  target-arm/cpu64.c                  |  61 +++++++++++-
>  10 files changed, 574 insertions(+), 142 deletions(-)
>  create mode 100644 hw/arm/xlnx-ep108.c
>  create mode 100644 hw/arm/xlnx-zynqmp.c
>  create mode 100644 include/hw/arm/xlnx-zynqmp.h
>  create mode 100644 include/hw/char/cadence_uart.h
>  create mode 100644 include/hw/net/cadence_gem.h
>
> --
> 2.3.6.3.g2cc70ee
>
>

Sorry this has a bug in it. Please ignore. V6 on way. The has_el3
change shouldn't be in.

Regards,
Peter