From: Gregory CLEMENT <gregory.clement@free-electrons.com> To: Ulf Hansson <ulf.hansson@linaro.org>, Adrian Hunter <adrian.hunter@intel.com>, linux-mmc@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Gregory CLEMENT <gregory.clement@free-electrons.com>, Thomas Petazzoni <thomas.petazzoni@free-electrons.com>, linux-arm-kernel@lists.infradead.org, Ziji Hu <huziji@marvell.com>, Jimmy Xu <zmxu@marvell.com>, Jisheng Zhang <jszhang@marvell.com>, Nadav Haklai <nadavh@marvell.com>, Ryan Gao <ygao@marvell.com>, Doug Jones <dougj@marvell.com>, Victor Gu <xigu@marvell.com>, "Wei(SOCP) Liu" <liuw@marvell.com>, Wilson Ding <dingwei@marvell.com>, Yehuda Yitschak <yehuday@marvell.com>, Marcin Wojtas <mw@semihalf.com>, Hanna Hawa <hannah@marvell.com>, Kostya Porotchkin <kostap@marvell.com> Subject: [PATCH v4 00/12] mmc: Add support to Marvell Xenon SD Host Controller Date: Tue, 13 Dec 2016 18:48:29 +0100 [thread overview] Message-ID: <cover.67d726f70f6bd48d38a2023513f2711080bc66c8.1481651244.git-series.gregory.clement@free-electrons.com> (raw) Hello, This the forth version of the series adding support for the SDHCI Xenon controller. It can be currently found on the Armada 37xx and the Armada 7K/8K but will be also used in more Marvell SoC (and not only the mvebu ones actually). v3 -> v4: For this version a few change have been done: - fixes 2 bug reported by kbuild-bot - remove extra of_node_put() - convert 0 in false for function returning boolean - add a device tree node for the sdhci controller present on the CP master for A7K/A8K. It also led to rename the sdhci0 node on AP to ap_sdhci0 to make a distinction with the one present on CP master. v2 -> v3 I think that now most (if not all) the remarks had been taking into account since the second version. According to Ziji Hu, here are the following changes: " Changes in V3: Adjust and improve Xenon DT bindings. Move some caps setting from driver into DT. Use mmc-card sub-node to represent eMMC type. Remove PHY Sampling Fixed Delay Line scan in lower speed mode. Improve Xenon probe and ->init_card() functions. Export sdhci_enable_sdio_irq() and implement own SDIO IRQ control. Split PHY patch into two smaller patches. Temporarily remove AXI clock before its implementation is improved." Besides this changes I also - Removed the sdhci-xenon-phy.h and moved its content in the shc-xenon-phy.c file. - Fixed the tuning-count usage - Managed the error case for clk_prepare_enable For the record the change from v1 was: " Changes in V2: rebase on v4.9-rc2. Re-write Xenon bindings. Ajust Xenon DT property naming. Add a new DT property to indicate eMMC card type, instead of using variable card_candidate. Clear quirks SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 in Xenon platform data Add support to HS400 retuning." Thanks, Gregory Gregory CLEMENT (3): arm64: dts: marvell: add eMMC support for Armada 37xx arm64: dts: marvell: add sdhci support for Armada 7K/8K arm64: configs: enable SDHCI driver for Xenon Hu Ziji (9): mmc: sdhci: Export sdhci_set_ios() from sdhci.c mmc: sdhci: Export sdhci_start_signal_voltage_switch() in sdhci.c mmc: sdhci: Export sdhci_execute_tuning() in sdhci.c mmc: sdhci: Export sdhci_enable_sdio_irq() from sdhci.c MAINTAINERS: add entry for Marvell Xenon MMC Host Controller drivers dt: bindings: Add bindings for Marvell Xenon SD Host Controller mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC. mmc: sdhci-xenon: Add SOC PHY PAD voltage control Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt | 197 ++- MAINTAINERS | 7 +- arch/arm64/boot/dts/marvell/armada-3720-db.dts | 17 +- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 11 +- arch/arm64/boot/dts/marvell/armada-7040-db.dts | 14 +- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 9 +- arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 10 +- arch/arm64/configs/defconfig | 1 +- drivers/mmc/host/Kconfig | 9 +- drivers/mmc/host/Makefile | 3 +- drivers/mmc/host/sdhci-xenon-phy.c | 908 +++++++- drivers/mmc/host/sdhci-xenon.c | 615 +++++- drivers/mmc/host/sdhci-xenon.h | 111 +- drivers/mmc/host/sdhci.c | 14 +- drivers/mmc/host/sdhci.h | 5 +- 15 files changed, 1926 insertions(+), 5 deletions(-) create mode 100644 Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt create mode 100644 drivers/mmc/host/sdhci-xenon-phy.c create mode 100644 drivers/mmc/host/sdhci-xenon.c create mode 100644 drivers/mmc/host/sdhci-xenon.h base-commit: 9fe68cad6e74967b88d0c6aeca7d9cd6b6e91942 -- git-series 0.9.1
WARNING: multiple messages have this Message-ID (diff)
From: gregory.clement@free-electrons.com (Gregory CLEMENT) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 00/12] mmc: Add support to Marvell Xenon SD Host Controller Date: Tue, 13 Dec 2016 18:48:29 +0100 [thread overview] Message-ID: <cover.67d726f70f6bd48d38a2023513f2711080bc66c8.1481651244.git-series.gregory.clement@free-electrons.com> (raw) Hello, This the forth version of the series adding support for the SDHCI Xenon controller. It can be currently found on the Armada 37xx and the Armada 7K/8K but will be also used in more Marvell SoC (and not only the mvebu ones actually). v3 -> v4: For this version a few change have been done: - fixes 2 bug reported by kbuild-bot - remove extra of_node_put() - convert 0 in false for function returning boolean - add a device tree node for the sdhci controller present on the CP master for A7K/A8K. It also led to rename the sdhci0 node on AP to ap_sdhci0 to make a distinction with the one present on CP master. v2 -> v3 I think that now most (if not all) the remarks had been taking into account since the second version. According to Ziji Hu, here are the following changes: " Changes in V3: Adjust and improve Xenon DT bindings. Move some caps setting from driver into DT. Use mmc-card sub-node to represent eMMC type. Remove PHY Sampling Fixed Delay Line scan in lower speed mode. Improve Xenon probe and ->init_card() functions. Export sdhci_enable_sdio_irq() and implement own SDIO IRQ control. Split PHY patch into two smaller patches. Temporarily remove AXI clock before its implementation is improved." Besides this changes I also - Removed the sdhci-xenon-phy.h and moved its content in the shc-xenon-phy.c file. - Fixed the tuning-count usage - Managed the error case for clk_prepare_enable For the record the change from v1 was: " Changes in V2: rebase on v4.9-rc2. Re-write Xenon bindings. Ajust Xenon DT property naming. Add a new DT property to indicate eMMC card type, instead of using variable card_candidate. Clear quirks SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 in Xenon platform data Add support to HS400 retuning." Thanks, Gregory Gregory CLEMENT (3): arm64: dts: marvell: add eMMC support for Armada 37xx arm64: dts: marvell: add sdhci support for Armada 7K/8K arm64: configs: enable SDHCI driver for Xenon Hu Ziji (9): mmc: sdhci: Export sdhci_set_ios() from sdhci.c mmc: sdhci: Export sdhci_start_signal_voltage_switch() in sdhci.c mmc: sdhci: Export sdhci_execute_tuning() in sdhci.c mmc: sdhci: Export sdhci_enable_sdio_irq() from sdhci.c MAINTAINERS: add entry for Marvell Xenon MMC Host Controller drivers dt: bindings: Add bindings for Marvell Xenon SD Host Controller mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC. mmc: sdhci-xenon: Add SOC PHY PAD voltage control Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt | 197 ++- MAINTAINERS | 7 +- arch/arm64/boot/dts/marvell/armada-3720-db.dts | 17 +- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 11 +- arch/arm64/boot/dts/marvell/armada-7040-db.dts | 14 +- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 9 +- arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 10 +- arch/arm64/configs/defconfig | 1 +- drivers/mmc/host/Kconfig | 9 +- drivers/mmc/host/Makefile | 3 +- drivers/mmc/host/sdhci-xenon-phy.c | 908 +++++++- drivers/mmc/host/sdhci-xenon.c | 615 +++++- drivers/mmc/host/sdhci-xenon.h | 111 +- drivers/mmc/host/sdhci.c | 14 +- drivers/mmc/host/sdhci.h | 5 +- 15 files changed, 1926 insertions(+), 5 deletions(-) create mode 100644 Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt create mode 100644 drivers/mmc/host/sdhci-xenon-phy.c create mode 100644 drivers/mmc/host/sdhci-xenon.c create mode 100644 drivers/mmc/host/sdhci-xenon.h base-commit: 9fe68cad6e74967b88d0c6aeca7d9cd6b6e91942 -- git-series 0.9.1
next reply other threads:[~2016-12-13 17:48 UTC|newest] Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-12-13 17:48 Gregory CLEMENT [this message] 2016-12-13 17:48 ` [PATCH v4 00/12] mmc: Add support to Marvell Xenon SD Host Controller Gregory CLEMENT 2016-12-13 17:48 ` [PATCH v4 01/12] mmc: sdhci: Export sdhci_set_ios() from sdhci.c Gregory CLEMENT 2016-12-13 17:48 ` Gregory CLEMENT 2016-12-13 17:48 ` [PATCH v4 02/12] mmc: sdhci: Export sdhci_start_signal_voltage_switch() in sdhci.c Gregory CLEMENT 2016-12-13 17:48 ` Gregory CLEMENT 2016-12-13 17:48 ` [PATCH v4 03/12] mmc: sdhci: Export sdhci_execute_tuning() " Gregory CLEMENT 2016-12-13 17:48 ` Gregory CLEMENT 2016-12-13 17:48 ` [PATCH v4 04/12] mmc: sdhci: Export sdhci_enable_sdio_irq() from sdhci.c Gregory CLEMENT 2016-12-13 17:48 ` Gregory CLEMENT 2016-12-13 17:48 ` [PATCH v4 05/12] MAINTAINERS: add entry for Marvell Xenon MMC Host Controller drivers Gregory CLEMENT 2016-12-13 17:48 ` Gregory CLEMENT 2016-12-13 17:48 ` [PATCH v4 06/12] dt: bindings: Add bindings for Marvell Xenon SD Host Controller Gregory CLEMENT 2016-12-13 17:48 ` Gregory CLEMENT 2016-12-22 11:18 ` Russell King - ARM Linux 2016-12-22 11:18 ` Russell King - ARM Linux 2016-12-22 12:47 ` Ziji Hu 2016-12-22 12:47 ` Ziji Hu 2016-12-13 17:48 ` [PATCH v4 07/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality Gregory CLEMENT 2016-12-13 17:48 ` Gregory CLEMENT 2017-01-04 7:26 ` Adrian Hunter 2017-01-04 7:26 ` Adrian Hunter 2017-01-04 8:51 ` Ziji Hu 2017-01-04 8:51 ` Ziji Hu 2017-01-04 9:08 ` Adrian Hunter 2017-01-04 9:08 ` Adrian Hunter 2016-12-13 17:48 ` [PATCH v4 08/12] mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC Gregory CLEMENT 2016-12-13 17:48 ` Gregory CLEMENT 2016-12-13 17:48 ` [PATCH v4 09/12] mmc: sdhci-xenon: Add SOC PHY PAD voltage control Gregory CLEMENT 2016-12-13 17:48 ` Gregory CLEMENT 2016-12-13 17:48 ` [PATCH v4 10/12] arm64: dts: marvell: add eMMC support for Armada 37xx Gregory CLEMENT 2016-12-13 17:48 ` Gregory CLEMENT 2016-12-13 17:48 ` [PATCH v4 11/12] arm64: dts: marvell: add sdhci support for Armada 7K/8K Gregory CLEMENT 2016-12-13 17:48 ` Gregory CLEMENT 2016-12-22 10:45 ` Russell King - ARM Linux 2016-12-22 10:45 ` Russell King - ARM Linux 2016-12-22 10:47 ` Thomas Petazzoni 2016-12-22 10:47 ` Thomas Petazzoni 2016-12-22 10:47 ` Russell King - ARM Linux 2016-12-22 10:47 ` Russell King - ARM Linux 2016-12-22 11:21 ` Russell King - ARM Linux 2016-12-22 11:21 ` Russell King - ARM Linux 2016-12-13 17:48 ` [PATCH v4 12/12] arm64: configs: enable SDHCI driver for Xenon Gregory CLEMENT 2016-12-13 17:48 ` Gregory CLEMENT [not found] ` <CAPv3WKeE_2gMn12MXraoUmDEJhi307mGuc4BgDYpethKNsMqRQ@mail.gmail.com> 2016-12-14 19:02 ` [PATCH v4 00/12] mmc: Add support to Marvell Xenon SD Host Controller Marcin Wojtas 2016-12-14 19:02 ` Marcin Wojtas 2016-12-22 11:25 ` Russell King - ARM Linux 2016-12-22 11:25 ` Russell King - ARM Linux
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=cover.67d726f70f6bd48d38a2023513f2711080bc66c8.1481651244.git-series.gregory.clement@free-electrons.com \ --to=gregory.clement@free-electrons.com \ --cc=adrian.hunter@intel.com \ --cc=andrew@lunn.ch \ --cc=dingwei@marvell.com \ --cc=dougj@marvell.com \ --cc=hannah@marvell.com \ --cc=huziji@marvell.com \ --cc=jason@lakedaemon.net \ --cc=jszhang@marvell.com \ --cc=kostap@marvell.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-mmc@vger.kernel.org \ --cc=liuw@marvell.com \ --cc=mw@semihalf.com \ --cc=nadavh@marvell.com \ --cc=sebastian.hesselbarth@gmail.com \ --cc=thomas.petazzoni@free-electrons.com \ --cc=ulf.hansson@linaro.org \ --cc=xigu@marvell.com \ --cc=yehuday@marvell.com \ --cc=ygao@marvell.com \ --cc=zmxu@marvell.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.