All of lore.kernel.org
 help / color / mirror / Atom feed
From: Russell King - ARM Linux <linux@armlinux.org.uk>
To: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
	Adrian Hunter <adrian.hunter@intel.com>,
	linux-mmc@vger.kernel.org,
	Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Yehuda Yitschak <yehuday@marvell.com>,
	Marcin Wojtas <mw@semihalf.com>,
	Jason Cooper <jason@lakedaemon.net>,
	Hanna Hawa <hannah@marvell.com>,
	Kostya Porotchkin <kostap@marvell.com>,
	Nadav Haklai <nadavh@marvell.com>, Ziji Hu <huziji@marvell.com>,
	Jimmy Xu <zmxu@marvell.com>, Doug Jones <dougj@marvell.com>,
	Ryan Gao <ygao@marvell.com>, Jisheng Zhang <jszhang@marvell.com>,
	Victor Gu <xigu@marvell.com>, "Wei(SOCP) Liu" <liuw@marvell.com>,
	Wilson Ding <dingwei@marvell.com>,
	linux-arm-kernel@lists.infradead.org,
	Sebastian Hesselbarth <sebastian.hesselbarth@gm>
Subject: Re: [PATCH v4 11/12] arm64: dts: marvell: add sdhci support for Armada 7K/8K
Date: Thu, 22 Dec 2016 11:21:59 +0000	[thread overview]
Message-ID: <20161222112159.GY14217@n2100.armlinux.org.uk> (raw)
In-Reply-To: <2564fe18eb9cc8a0a1a3311cdf7e7141f35211bd.1481651244.git-series.gregory.clement@free-electrons.com>

On Tue, Dec 13, 2016 at 06:48:40PM +0100, Gregory CLEMENT wrote:
> diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> index 7b6136182ad0..181e8c5de3bf 100644
> --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> @@ -229,6 +229,15 @@
>  
>  			};
>  
> +			ap_sdhci0: sdhci@6e0000 {
> +				compatible = "marvell,armada-7000-sdhci";
> +				reg = <0x6e0000 0x300>;
> +				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "core";
> +				clocks = <&cpm_syscon0 1 4>;
> +				status = "disabled";
> +			};
> +
>  			ap_syscon: system-controller@6f4000 {
>  				compatible = "marvell,ap806-system-controller",
>  					     "syscon";
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> index e5e3ed678b6f..035b2b2fc9ca 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> @@ -164,6 +164,16 @@
>  				clocks = <&cpm_syscon0 1 21>;
>  				status = "disabled";
>  			};
> +
> +			cpm_sdhci0: sdhci@780000 {
> +				compatible = "marvell,armada-7000-sdhci";
> +				reg = <0x780000 0x300>;
> +				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "core";
> +				clocks = <&cpm_syscon0 1 4>;
> +				status = "disabled";
> +			};
> +

One other point - aren't the SDHCI interfaces dma-coherent on the AP806
and CP110?

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

WARNING: multiple messages have this Message-ID (diff)
From: linux@armlinux.org.uk (Russell King - ARM Linux)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 11/12] arm64: dts: marvell: add sdhci support for Armada 7K/8K
Date: Thu, 22 Dec 2016 11:21:59 +0000	[thread overview]
Message-ID: <20161222112159.GY14217@n2100.armlinux.org.uk> (raw)
In-Reply-To: <2564fe18eb9cc8a0a1a3311cdf7e7141f35211bd.1481651244.git-series.gregory.clement@free-electrons.com>

On Tue, Dec 13, 2016 at 06:48:40PM +0100, Gregory CLEMENT wrote:
> diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> index 7b6136182ad0..181e8c5de3bf 100644
> --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> @@ -229,6 +229,15 @@
>  
>  			};
>  
> +			ap_sdhci0: sdhci at 6e0000 {
> +				compatible = "marvell,armada-7000-sdhci";
> +				reg = <0x6e0000 0x300>;
> +				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "core";
> +				clocks = <&cpm_syscon0 1 4>;
> +				status = "disabled";
> +			};
> +
>  			ap_syscon: system-controller at 6f4000 {
>  				compatible = "marvell,ap806-system-controller",
>  					     "syscon";
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> index e5e3ed678b6f..035b2b2fc9ca 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> @@ -164,6 +164,16 @@
>  				clocks = <&cpm_syscon0 1 21>;
>  				status = "disabled";
>  			};
> +
> +			cpm_sdhci0: sdhci at 780000 {
> +				compatible = "marvell,armada-7000-sdhci";
> +				reg = <0x780000 0x300>;
> +				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "core";
> +				clocks = <&cpm_syscon0 1 4>;
> +				status = "disabled";
> +			};
> +

One other point - aren't the SDHCI interfaces dma-coherent on the AP806
and CP110?

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

  parent reply	other threads:[~2016-12-22 11:24 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-13 17:48 [PATCH v4 00/12] mmc: Add support to Marvell Xenon SD Host Controller Gregory CLEMENT
2016-12-13 17:48 ` Gregory CLEMENT
2016-12-13 17:48 ` [PATCH v4 01/12] mmc: sdhci: Export sdhci_set_ios() from sdhci.c Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
2016-12-13 17:48 ` [PATCH v4 02/12] mmc: sdhci: Export sdhci_start_signal_voltage_switch() in sdhci.c Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
2016-12-13 17:48 ` [PATCH v4 03/12] mmc: sdhci: Export sdhci_execute_tuning() " Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
2016-12-13 17:48 ` [PATCH v4 04/12] mmc: sdhci: Export sdhci_enable_sdio_irq() from sdhci.c Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
2016-12-13 17:48 ` [PATCH v4 05/12] MAINTAINERS: add entry for Marvell Xenon MMC Host Controller drivers Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
2016-12-13 17:48 ` [PATCH v4 06/12] dt: bindings: Add bindings for Marvell Xenon SD Host Controller Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
2016-12-22 11:18   ` Russell King - ARM Linux
2016-12-22 11:18     ` Russell King - ARM Linux
2016-12-22 12:47     ` Ziji Hu
2016-12-22 12:47       ` Ziji Hu
2016-12-13 17:48 ` [PATCH v4 07/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
2017-01-04  7:26   ` Adrian Hunter
2017-01-04  7:26     ` Adrian Hunter
2017-01-04  8:51     ` Ziji Hu
2017-01-04  8:51       ` Ziji Hu
2017-01-04  9:08       ` Adrian Hunter
2017-01-04  9:08         ` Adrian Hunter
2016-12-13 17:48 ` [PATCH v4 08/12] mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
2016-12-13 17:48 ` [PATCH v4 09/12] mmc: sdhci-xenon: Add SOC PHY PAD voltage control Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
2016-12-13 17:48 ` [PATCH v4 10/12] arm64: dts: marvell: add eMMC support for Armada 37xx Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
2016-12-13 17:48 ` [PATCH v4 11/12] arm64: dts: marvell: add sdhci support for Armada 7K/8K Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
2016-12-22 10:45   ` Russell King - ARM Linux
2016-12-22 10:45     ` Russell King - ARM Linux
2016-12-22 10:47     ` Thomas Petazzoni
2016-12-22 10:47       ` Thomas Petazzoni
2016-12-22 10:47   ` Russell King - ARM Linux
2016-12-22 10:47     ` Russell King - ARM Linux
2016-12-22 11:21   ` Russell King - ARM Linux [this message]
2016-12-22 11:21     ` Russell King - ARM Linux
2016-12-13 17:48 ` [PATCH v4 12/12] arm64: configs: enable SDHCI driver for Xenon Gregory CLEMENT
2016-12-13 17:48   ` Gregory CLEMENT
     [not found] ` <CAPv3WKeE_2gMn12MXraoUmDEJhi307mGuc4BgDYpethKNsMqRQ@mail.gmail.com>
2016-12-14 19:02   ` [PATCH v4 00/12] mmc: Add support to Marvell Xenon SD Host Controller Marcin Wojtas
2016-12-14 19:02     ` Marcin Wojtas
2016-12-22 11:25 ` Russell King - ARM Linux
2016-12-22 11:25   ` Russell King - ARM Linux

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161222112159.GY14217@n2100.armlinux.org.uk \
    --to=linux@armlinux.org.uk \
    --cc=adrian.hunter@intel.com \
    --cc=andrew@lunn.ch \
    --cc=dingwei@marvell.com \
    --cc=dougj@marvell.com \
    --cc=gregory.clement@free-electrons.com \
    --cc=hannah@marvell.com \
    --cc=huziji@marvell.com \
    --cc=jason@lakedaemon.net \
    --cc=jszhang@marvell.com \
    --cc=kostap@marvell.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=liuw@marvell.com \
    --cc=mw@semihalf.com \
    --cc=nadavh@marvell.com \
    --cc=sebastian.hesselbarth@gm \
    --cc=thomas.petazzoni@free-electrons.com \
    --cc=ulf.hansson@linaro.org \
    --cc=xigu@marvell.com \
    --cc=yehuday@marvell.com \
    --cc=ygao@marvell.com \
    --cc=zmxu@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.