* [Qemu-devel] [PATCHv2] m68k: change default system clock for m5208evb @ 2016-09-28 0:06 Greg Ungerer 2016-09-29 7:50 ` Laurent Vivier 2016-09-29 15:57 ` Michael Tokarev 0 siblings, 2 replies; 7+ messages in thread From: Greg Ungerer @ 2016-09-28 0:06 UTC (permalink / raw) To: qemu-devel; +Cc: Greg Ungerer The shipping default setting for the Freescale M5208EVB board is to run the CPU at 166.67MHz. The current qemu emulation code for this board is defaulting to 66MHz. This results in time appearing to run way to slowly. So a "sleep 5" in a standard ColdFire Linux build takes almost 15 seconds in real time to actually complete. Change the hard coded default to match the default hardware setting. Signed-off-by: Greg Ungerer <gerg@uclinux.org> --- hw/m68k/mcf5208.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) v2: more accurately set frequency (166666666 instead of 166000000) diff --git a/hw/m68k/mcf5208.c b/hw/m68k/mcf5208.c index 9240ebf..3438314 100644 --- a/hw/m68k/mcf5208.c +++ b/hw/m68k/mcf5208.c @@ -21,7 +21,7 @@ #include "elf.h" #include "exec/address-spaces.h" -#define SYS_FREQ 66000000 +#define SYS_FREQ 166666666 #define PCSR_EN 0x0001 #define PCSR_RLD 0x0002 -- 1.9.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] [PATCHv2] m68k: change default system clock for m5208evb 2016-09-28 0:06 [Qemu-devel] [PATCHv2] m68k: change default system clock for m5208evb Greg Ungerer @ 2016-09-29 7:50 ` Laurent Vivier 2016-09-29 7:56 ` Thomas Huth 2016-09-29 12:27 ` Greg Ungerer 2016-09-29 15:57 ` Michael Tokarev 1 sibling, 2 replies; 7+ messages in thread From: Laurent Vivier @ 2016-09-29 7:50 UTC (permalink / raw) To: Greg Ungerer, qemu-devel Le 28/09/2016 à 02:06, Greg Ungerer a écrit : > The shipping default setting for the Freescale M5208EVB board is to run > the CPU at 166.67MHz. The current qemu emulation code for this board is > defaulting to 66MHz. This results in time appearing to run way to slowly. > So a "sleep 5" in a standard ColdFire Linux build takes almost 15 > seconds in real time to actually complete. > > Change the hard coded default to match the default hardware setting. > > Signed-off-by: Greg Ungerer <gerg@uclinux.org> This solution is as good as another, so: Reviewed-by: Laurent Vivier <laurent@vivier.eu> > --- > hw/m68k/mcf5208.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > v2: more accurately set frequency (166666666 instead of 166000000) > > diff --git a/hw/m68k/mcf5208.c b/hw/m68k/mcf5208.c > index 9240ebf..3438314 100644 > --- a/hw/m68k/mcf5208.c > +++ b/hw/m68k/mcf5208.c > @@ -21,7 +21,7 @@ > #include "elf.h" > #include "exec/address-spaces.h" > > -#define SYS_FREQ 66000000 > +#define SYS_FREQ 166666666 > > #define PCSR_EN 0x0001 > #define PCSR_RLD 0x0002 > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] [PATCHv2] m68k: change default system clock for m5208evb 2016-09-29 7:50 ` Laurent Vivier @ 2016-09-29 7:56 ` Thomas Huth 2016-09-29 8:02 ` Laurent Vivier 2016-09-29 12:39 ` Greg Ungerer 2016-09-29 12:27 ` Greg Ungerer 1 sibling, 2 replies; 7+ messages in thread From: Thomas Huth @ 2016-09-29 7:56 UTC (permalink / raw) To: Laurent Vivier, Greg Ungerer, qemu-devel, qemu-trivial, Peter Maydell On 29.09.2016 09:50, Laurent Vivier wrote: > > > Le 28/09/2016 à 02:06, Greg Ungerer a écrit : >> The shipping default setting for the Freescale M5208EVB board is to run >> the CPU at 166.67MHz. The current qemu emulation code for this board is >> defaulting to 66MHz. This results in time appearing to run way to slowly. >> So a "sleep 5" in a standard ColdFire Linux build takes almost 15 >> seconds in real time to actually complete. >> >> Change the hard coded default to match the default hardware setting. >> >> Signed-off-by: Greg Ungerer <gerg@uclinux.org> > > This solution is as good as another, so: > > Reviewed-by: Laurent Vivier <laurent@vivier.eu> Fine for me, too, so: Reviewed-by: Thomas Huth <huth@tuxfamily.org> By the way, we still do not have a m68k maintainer yet ... Laurent, maybe you could finally send a pull request for that patch here: https://lists.gnu.org/archive/html/qemu-devel/2016-05/msg00805.html ? Meanwhile, Peter, could you please take this patch here from Greg directly? Or should it go via qemu-trivial instead? Thomas >> --- >> hw/m68k/mcf5208.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> v2: more accurately set frequency (166666666 instead of 166000000) >> >> diff --git a/hw/m68k/mcf5208.c b/hw/m68k/mcf5208.c >> index 9240ebf..3438314 100644 >> --- a/hw/m68k/mcf5208.c >> +++ b/hw/m68k/mcf5208.c >> @@ -21,7 +21,7 @@ >> #include "elf.h" >> #include "exec/address-spaces.h" >> >> -#define SYS_FREQ 66000000 >> +#define SYS_FREQ 166666666 >> >> #define PCSR_EN 0x0001 >> #define PCSR_RLD 0x0002 >> > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] [PATCHv2] m68k: change default system clock for m5208evb 2016-09-29 7:56 ` Thomas Huth @ 2016-09-29 8:02 ` Laurent Vivier 2016-09-29 12:39 ` Greg Ungerer 1 sibling, 0 replies; 7+ messages in thread From: Laurent Vivier @ 2016-09-29 8:02 UTC (permalink / raw) To: Thomas Huth, Greg Ungerer, qemu-devel, qemu-trivial, Peter Maydell Le 29/09/2016 à 09:56, Thomas Huth a écrit : > On 29.09.2016 09:50, Laurent Vivier wrote: >> >> >> Le 28/09/2016 à 02:06, Greg Ungerer a écrit : >>> The shipping default setting for the Freescale M5208EVB board is to run >>> the CPU at 166.67MHz. The current qemu emulation code for this board is >>> defaulting to 66MHz. This results in time appearing to run way to slowly. >>> So a "sleep 5" in a standard ColdFire Linux build takes almost 15 >>> seconds in real time to actually complete. >>> >>> Change the hard coded default to match the default hardware setting. >>> >>> Signed-off-by: Greg Ungerer <gerg@uclinux.org> >> >> This solution is as good as another, so: >> >> Reviewed-by: Laurent Vivier <laurent@vivier.eu> > > Fine for me, too, so: > > Reviewed-by: Thomas Huth <huth@tuxfamily.org> > > By the way, we still do not have a m68k maintainer yet ... Laurent, > maybe you could finally send a pull request for that patch here: > https://lists.gnu.org/archive/html/qemu-devel/2016-05/msg00805.html ? Well, this patch was waiting I resend my 680x0 support series, and I didn't have the time to rework it until now... but if you want to merge it as is, don't hesitate. Thanks, Laurent ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] [PATCHv2] m68k: change default system clock for m5208evb 2016-09-29 7:56 ` Thomas Huth 2016-09-29 8:02 ` Laurent Vivier @ 2016-09-29 12:39 ` Greg Ungerer 1 sibling, 0 replies; 7+ messages in thread From: Greg Ungerer @ 2016-09-29 12:39 UTC (permalink / raw) To: Thomas Huth, Laurent Vivier, qemu-devel, qemu-trivial, Peter Maydell Hi Thomas, On 29/09/16 17:56, Thomas Huth wrote: > On 29.09.2016 09:50, Laurent Vivier wrote: >> >> >> Le 28/09/2016 à 02:06, Greg Ungerer a écrit : >>> The shipping default setting for the Freescale M5208EVB board is to run >>> the CPU at 166.67MHz. The current qemu emulation code for this board is >>> defaulting to 66MHz. This results in time appearing to run way to slowly. >>> So a "sleep 5" in a standard ColdFire Linux build takes almost 15 >>> seconds in real time to actually complete. >>> >>> Change the hard coded default to match the default hardware setting. >>> >>> Signed-off-by: Greg Ungerer <gerg@uclinux.org> >> >> This solution is as good as another, so: >> >> Reviewed-by: Laurent Vivier <laurent@vivier.eu> > > Fine for me, too, so: > > Reviewed-by: Thomas Huth <huth@tuxfamily.org> Thanks for the review. Regards Greg > By the way, we still do not have a m68k maintainer yet ... Laurent, > maybe you could finally send a pull request for that patch here: > https://lists.gnu.org/archive/html/qemu-devel/2016-05/msg00805.html ? > > Meanwhile, Peter, could you please take this patch here from Greg > directly? Or should it go via qemu-trivial instead? > > Thomas > > >>> --- >>> hw/m68k/mcf5208.c | 2 +- >>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> v2: more accurately set frequency (166666666 instead of 166000000) >>> >>> diff --git a/hw/m68k/mcf5208.c b/hw/m68k/mcf5208.c >>> index 9240ebf..3438314 100644 >>> --- a/hw/m68k/mcf5208.c >>> +++ b/hw/m68k/mcf5208.c >>> @@ -21,7 +21,7 @@ >>> #include "elf.h" >>> #include "exec/address-spaces.h" >>> >>> -#define SYS_FREQ 66000000 >>> +#define SYS_FREQ 166666666 >>> >>> #define PCSR_EN 0x0001 >>> #define PCSR_RLD 0x0002 >>> >> > > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] [PATCHv2] m68k: change default system clock for m5208evb 2016-09-29 7:50 ` Laurent Vivier 2016-09-29 7:56 ` Thomas Huth @ 2016-09-29 12:27 ` Greg Ungerer 1 sibling, 0 replies; 7+ messages in thread From: Greg Ungerer @ 2016-09-29 12:27 UTC (permalink / raw) To: Laurent Vivier, qemu-devel Hi Laurent, On 29/09/16 17:50, Laurent Vivier wrote: > Le 28/09/2016 à 02:06, Greg Ungerer a écrit : >> The shipping default setting for the Freescale M5208EVB board is to run >> the CPU at 166.67MHz. The current qemu emulation code for this board is >> defaulting to 66MHz. This results in time appearing to run way to slowly. >> So a "sleep 5" in a standard ColdFire Linux build takes almost 15 >> seconds in real time to actually complete. >> >> Change the hard coded default to match the default hardware setting. >> >> Signed-off-by: Greg Ungerer <gerg@uclinux.org> > > This solution is as good as another, so: > > Reviewed-by: Laurent Vivier <laurent@vivier.eu> Thanks for the review and comments, much appreciated. Regards Greg >> --- >> hw/m68k/mcf5208.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> v2: more accurately set frequency (166666666 instead of 166000000) >> >> diff --git a/hw/m68k/mcf5208.c b/hw/m68k/mcf5208.c >> index 9240ebf..3438314 100644 >> --- a/hw/m68k/mcf5208.c >> +++ b/hw/m68k/mcf5208.c >> @@ -21,7 +21,7 @@ >> #include "elf.h" >> #include "exec/address-spaces.h" >> >> -#define SYS_FREQ 66000000 >> +#define SYS_FREQ 166666666 >> >> #define PCSR_EN 0x0001 >> #define PCSR_RLD 0x0002 >> > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] [PATCHv2] m68k: change default system clock for m5208evb 2016-09-28 0:06 [Qemu-devel] [PATCHv2] m68k: change default system clock for m5208evb Greg Ungerer 2016-09-29 7:50 ` Laurent Vivier @ 2016-09-29 15:57 ` Michael Tokarev 1 sibling, 0 replies; 7+ messages in thread From: Michael Tokarev @ 2016-09-29 15:57 UTC (permalink / raw) To: Greg Ungerer, qemu-devel; +Cc: qemu-trivial Applied to -trivial, thank you! /mjt ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2016-09-29 15:57 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-09-28 0:06 [Qemu-devel] [PATCHv2] m68k: change default system clock for m5208evb Greg Ungerer 2016-09-29 7:50 ` Laurent Vivier 2016-09-29 7:56 ` Thomas Huth 2016-09-29 8:02 ` Laurent Vivier 2016-09-29 12:39 ` Greg Ungerer 2016-09-29 12:27 ` Greg Ungerer 2016-09-29 15:57 ` Michael Tokarev
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.