* Re: [OE-core][PATCH] README.skeleton: add readme to meta-skeleton layer [not found] <1686C6B4AE0761BC.32729@lists.openembedded.org> @ 2021-06-22 21:50 ` Scott Weaver 2021-06-23 21:12 ` Richard Purdie 0 siblings, 1 reply; 4+ messages in thread From: Scott Weaver @ 2021-06-22 21:50 UTC (permalink / raw) To: Scott Weaver; +Cc: openembedded-core, Richard Purdie, Randy MacLeod [-- Attachment #1: Type: text/plain, Size: 1444 bytes --] I didn't see that this patch was picked up (but maybe I'm looking in the wrong place) and I received the email from Stephen that the issue should be moved to 3.4 M2. Did I send this to the wrong mailing list or is it not the solution you're looking for? I elaborated in bugzilla on why I think just adding the readme file to close this issue is enough but you may not have seen that comment or agree. :) https://bugzilla.yoctoproject.org/show_bug.cgi?id=13612 Scott On Tue, Jun 8, 2021 at 9:46 PM Scott Weaver via lists.openembedded.org <weaverjs=gmail.com@lists.openembedded.org> wrote: > Added to satisfy the yocto-check-layer tool readme file test. > > [YOCTO #13612] > > Signed-off-by: Scott Weaver <weaverjs@gmail.com> > --- > meta-skeleton/README.skeleton | 7 +++++++ > 1 file changed, 7 insertions(+) > create mode 100644 meta-skeleton/README.skeleton > > diff --git a/meta-skeleton/README.skeleton b/meta-skeleton/README.skeleton > new file mode 100644 > index 0000000000..25468dc87a > --- /dev/null > +++ b/meta-skeleton/README.skeleton > @@ -0,0 +1,7 @@ > +meta-skeleton > +============= > + > +The meta-skeleton layer contains example recipes and configuration files. > + > +This layer is not intended to demonstrate a Yocto Project Compatible > software layer. > +Disable the signature check when testing this layer using the > yocto-check-layer tool. > -- > 2.25.1 > > > > > [-- Attachment #2: Type: text/html, Size: 2055 bytes --] ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [OE-core][PATCH] README.skeleton: add readme to meta-skeleton layer 2021-06-22 21:50 ` [OE-core][PATCH] README.skeleton: add readme to meta-skeleton layer Scott Weaver @ 2021-06-23 21:12 ` Richard Purdie 2021-06-24 1:13 ` Scott Weaver 0 siblings, 1 reply; 4+ messages in thread From: Richard Purdie @ 2021-06-23 21:12 UTC (permalink / raw) To: Scott Weaver; +Cc: openembedded-core, Randy MacLeod On Tue, 2021-06-22 at 17:50 -0400, Scott Weaver wrote: > I didn't see that this patch was picked up (but maybe I'm looking in the wrong place) and I received the email > from Stephen that the issue should be moved to 3.4 M2. > Did I send this to the wrong mailing list or is it not the solution you're looking for? > > I elaborated in bugzilla on why I think just adding the readme file to close this issue is enough but you may > not have seen that comment or agree. :) > https://bugzilla.yoctoproject.org/show_bug.cgi?id=13612 > > Scott > > On Tue, Jun 8, 2021 at 9:46 PM Scott Weaver via lists.openembedded.org < > weaverjs=gmail.com@lists.openembedded.org> wrote: > > Added to satisfy the yocto-check-layer tool readme file test. > > > > [YOCTO #13612] > > > > Signed-off-by: Scott Weaver <weaverjs@gmail.com> > > --- > > meta-skeleton/README.skeleton | 7 +++++++ > > 1 file changed, 7 insertions(+) > > create mode 100644 meta-skeleton/README.skeleton > > > > diff --git a/meta-skeleton/README.skeleton b/meta-skeleton/README.skeleton > > new file mode 100644 > > index 0000000000..25468dc87a > > --- /dev/null > > +++ b/meta-skeleton/README.skeleton > > @@ -0,0 +1,7 @@ > > +meta-skeleton > > +============= > > + > > +The meta-skeleton layer contains example recipes and configuration files. > > + > > +This layer is not intended to demonstrate a Yocto Project Compatible software layer. > > +Disable the signature check when testing this layer using the yocto-check-layer tool. Sorry, it takes time to page in the context for this. I think we should fix meta-skeleton to work with yocto-check-layer. I think this may be relatively simple, we can change the busybox bbappend that is causing the signature failure to be 'distro' specific, e.g. something like: -SRC_URI += " \ +SRC_URI_append_mydistro = " \ and then an example is still there but it doesn't break the checks (and isn't enabled by default). We could add a comment about it being enabled by a custom distro called 'mydistro'. That change, along with your README addition should allow the layer tests to pass. Cheers, Richard ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [OE-core][PATCH] README.skeleton: add readme to meta-skeleton layer 2021-06-23 21:12 ` Richard Purdie @ 2021-06-24 1:13 ` Scott Weaver 0 siblings, 0 replies; 4+ messages in thread From: Scott Weaver @ 2021-06-24 1:13 UTC (permalink / raw) To: Richard Purdie; +Cc: openembedded-core, Randy MacLeod [-- Attachment #1: Type: text/plain, Size: 2698 bytes --] Thanks, Richard. The issue noted that the distro specific update wasn't working but it's because they tried SRC_URI_append_poky (which correctly failed) so I didn't even think to try anything else. My mistake. I'll make the changes you suggested. Thanks again for your time! Scott On Wed, Jun 23, 2021 at 5:12 PM Richard Purdie < richard.purdie@linuxfoundation.org> wrote: > On Tue, 2021-06-22 at 17:50 -0400, Scott Weaver wrote: > > I didn't see that this patch was picked up (but maybe I'm looking in the > wrong place) and I received the email > > from Stephen that the issue should be moved to 3.4 M2. > > Did I send this to the wrong mailing list or is it not the solution > you're looking for? > > > > I elaborated in bugzilla on why I think just adding the readme file to > close this issue is enough but you may > > not have seen that comment or agree. :) > > https://bugzilla.yoctoproject.org/show_bug.cgi?id=13612 > > > > Scott > > > > On Tue, Jun 8, 2021 at 9:46 PM Scott Weaver via lists.openembedded.org < > > weaverjs=gmail.com@lists.openembedded.org> wrote: > > > Added to satisfy the yocto-check-layer tool readme file test. > > > > > > [YOCTO #13612] > > > > > > Signed-off-by: Scott Weaver <weaverjs@gmail.com> > > > --- > > > meta-skeleton/README.skeleton | 7 +++++++ > > > 1 file changed, 7 insertions(+) > > > create mode 100644 meta-skeleton/README.skeleton > > > > > > diff --git a/meta-skeleton/README.skeleton > b/meta-skeleton/README.skeleton > > > new file mode 100644 > > > index 0000000000..25468dc87a > > > --- /dev/null > > > +++ b/meta-skeleton/README.skeleton > > > @@ -0,0 +1,7 @@ > > > +meta-skeleton > > > +============= > > > + > > > +The meta-skeleton layer contains example recipes and configuration > files. > > > + > > > +This layer is not intended to demonstrate a Yocto Project Compatible > software layer. > > > +Disable the signature check when testing this layer using the > yocto-check-layer tool. > > Sorry, it takes time to page in the context for this. > > I think we should fix meta-skeleton to work with yocto-check-layer. I > think this > may be relatively simple, we can change the busybox bbappend that is > causing the > signature failure to be 'distro' specific, e.g. something like: > > -SRC_URI += " \ > +SRC_URI_append_mydistro = " \ > > and then an example is still there but it doesn't break the checks (and > isn't > enabled by default). We could add a comment about it being enabled by a > custom > distro called 'mydistro'. > > That change, along with your README addition should allow the layer tests > to pass. > > Cheers, > > Richard > > > [-- Attachment #2: Type: text/html, Size: 3735 bytes --] ^ permalink raw reply [flat|nested] 4+ messages in thread
* [OE-core][PATCH] README.skeleton: add readme to meta-skeleton layer @ 2021-06-09 1:45 Scott Weaver 0 siblings, 0 replies; 4+ messages in thread From: Scott Weaver @ 2021-06-09 1:45 UTC (permalink / raw) To: openembedded-core; +Cc: Scott Weaver Added to satisfy the yocto-check-layer tool readme file test. [YOCTO #13612] Signed-off-by: Scott Weaver <weaverjs@gmail.com> --- meta-skeleton/README.skeleton | 7 +++++++ 1 file changed, 7 insertions(+) create mode 100644 meta-skeleton/README.skeleton diff --git a/meta-skeleton/README.skeleton b/meta-skeleton/README.skeleton new file mode 100644 index 0000000000..25468dc87a --- /dev/null +++ b/meta-skeleton/README.skeleton @@ -0,0 +1,7 @@ +meta-skeleton +============= + +The meta-skeleton layer contains example recipes and configuration files. + +This layer is not intended to demonstrate a Yocto Project Compatible software layer. +Disable the signature check when testing this layer using the yocto-check-layer tool. -- 2.25.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-06-24 1:13 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <1686C6B4AE0761BC.32729@lists.openembedded.org> 2021-06-22 21:50 ` [OE-core][PATCH] README.skeleton: add readme to meta-skeleton layer Scott Weaver 2021-06-23 21:12 ` Richard Purdie 2021-06-24 1:13 ` Scott Weaver 2021-06-09 1:45 Scott Weaver
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.