[v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Alexandre TORGUE]

Hi,

Since v5.4.102 I observe a regression on stm32mp1 platform: "no-map" 
reserved-memory regions are no more "reserved" and make part of the 
kernel System RAM. This causes allocation failure for devices which try 
to take a reserved-memory region.

It has been introduced by the following path:

"fdt: Properly handle "no-map" field in the memory region
[ Upstream commit 86588296acbfb1591e92ba60221e95677ecadb43 ]"
which replace memblock_remove by memblock_mark_nomap in no-map case.

Reverting this patch it's fine.

I add part of my DT (something is maybe wrong inside):

memory@c0000000 {
	reg = <0xc0000000 0x20000000>;
};

reserved-memory {
	#address-cells = <1>;
	#size-cells = <1>;
	ranges;

	gpu_reserved: gpu@d4000000 {
		reg = <0xd4000000 0x4000000>;
		no-map;
	};
};

Sorry if this issue has already been raised and discussed.

Thanks
alex

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Rob Herring]

On Tue, Apr 20, 2021 at 9:03 AM Alexandre TORGUE
<alexandre.torgue@foss.st.com> wrote:
>
> Hi,

Greg or Sasha won't know what to do with this. Not sure who follows
the stable list either. Quentin sent the patch, but is not the author.
Given the patch in question is about consistency between EFI memory
map boot and DT memory map boot, copying EFI knowledgeable folks would
help (Ard B for starters).

>
> Since v5.4.102 I observe a regression on stm32mp1 platform: "no-map"
> reserved-memory regions are no more "reserved" and make part of the
> kernel System RAM. This causes allocation failure for devices which try
> to take a reserved-memory region.
>
> It has been introduced by the following path:
>
> "fdt: Properly handle "no-map" field in the memory region
> [ Upstream commit 86588296acbfb1591e92ba60221e95677ecadb43 ]"
> which replace memblock_remove by memblock_mark_nomap in no-map case.
>
> Reverting this patch it's fine.
>
> I add part of my DT (something is maybe wrong inside):
>
> memory@c0000000 {
>         reg = <0xc0000000 0x20000000>;
> };
>
> reserved-memory {
>         #address-cells = <1>;
>         #size-cells = <1>;
>         ranges;
>
>         gpu_reserved: gpu@d4000000 {
>                 reg = <0xd4000000 0x4000000>;
>                 no-map;
>         };
> };
>
> Sorry if this issue has already been raised and discussed.
>
> Thanks
> alex

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Alexandre TORGUE]

On 4/20/21 4:45 PM, Rob Herring wrote:
> On Tue, Apr 20, 2021 at 9:03 AM Alexandre TORGUE
> <alexandre.torgue@foss.st.com> wrote:
>>
>> Hi,
> 
> Greg or Sasha won't know what to do with this. Not sure who follows
> the stable list either. Quentin sent the patch, but is not the author.
> Given the patch in question is about consistency between EFI memory
> map boot and DT memory map boot, copying EFI knowledgeable folks would
> help (Ard B for starters).

Ok thanks for the tips. I add Ard in the loop.

Ard, let me know if other people have to be directly added or if I have 
to resend to another mailing list.

thanks
alex

> 
>>
>> Since v5.4.102 I observe a regression on stm32mp1 platform: "no-map"
>> reserved-memory regions are no more "reserved" and make part of the
>> kernel System RAM. This causes allocation failure for devices which try
>> to take a reserved-memory region.
>>
>> It has been introduced by the following path:
>>
>> "fdt: Properly handle "no-map" field in the memory region
>> [ Upstream commit 86588296acbfb1591e92ba60221e95677ecadb43 ]"
>> which replace memblock_remove by memblock_mark_nomap in no-map case.
>>
>> Reverting this patch it's fine.
>>
>> I add part of my DT (something is maybe wrong inside):
>>
>> memory@c0000000 {
>>          reg = <0xc0000000 0x20000000>;
>> };
>>
>> reserved-memory {
>>          #address-cells = <1>;
>>          #size-cells = <1>;
>>          ranges;
>>
>>          gpu_reserved: gpu@d4000000 {
>>                  reg = <0xd4000000 0x4000000>;
>>                  no-map;
>>          };
>> };
>>
>> Sorry if this issue has already been raised and discussed.
>>
>> Thanks
>> alex

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Rob Herring]

On Tue, Apr 20, 2021 at 10:12 AM Alexandre TORGUE
<alexandre.torgue@foss.st.com> wrote:
>
>
>
> On 4/20/21 4:45 PM, Rob Herring wrote:
> > On Tue, Apr 20, 2021 at 9:03 AM Alexandre TORGUE
> > <alexandre.torgue@foss.st.com> wrote:
> >>
> >> Hi,
> >
> > Greg or Sasha won't know what to do with this. Not sure who follows
> > the stable list either. Quentin sent the patch, but is not the author.
> > Given the patch in question is about consistency between EFI memory
> > map boot and DT memory map boot, copying EFI knowledgeable folks would
> > help (Ard B for starters).
>
> Ok thanks for the tips. I add Ard in the loop.

Sigh. If it was only Ard I was suggesting I would have done that
myself. Now everyone on the patch in question and relevant lists are
Cc'ed.

>
> Ard, let me know if other people have to be directly added or if I have
> to resend to another mailing list.
>
> thanks
> alex
>
> >
> >>
> >> Since v5.4.102 I observe a regression on stm32mp1 platform: "no-map"
> >> reserved-memory regions are no more "reserved" and make part of the
> >> kernel System RAM. This causes allocation failure for devices which try
> >> to take a reserved-memory region.
> >>
> >> It has been introduced by the following path:
> >>
> >> "fdt: Properly handle "no-map" field in the memory region
> >> [ Upstream commit 86588296acbfb1591e92ba60221e95677ecadb43 ]"
> >> which replace memblock_remove by memblock_mark_nomap in no-map case.
> >>
> >> Reverting this patch it's fine.
> >>
> >> I add part of my DT (something is maybe wrong inside):
> >>
> >> memory@c0000000 {
> >>          reg = <0xc0000000 0x20000000>;
> >> };
> >>
> >> reserved-memory {
> >>          #address-cells = <1>;
> >>          #size-cells = <1>;
> >>          ranges;
> >>
> >>          gpu_reserved: gpu@d4000000 {
> >>                  reg = <0xd4000000 0x4000000>;
> >>                  no-map;
> >>          };
> >> };
> >>
> >> Sorry if this issue has already been raised and discussed.
> >>
> >> Thanks
> >> alex

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Rob Herring]

On Tue, Apr 20, 2021 at 10:12 AM Alexandre TORGUE
<alexandre.torgue@foss.st.com> wrote:
>
>
>
> On 4/20/21 4:45 PM, Rob Herring wrote:
> > On Tue, Apr 20, 2021 at 9:03 AM Alexandre TORGUE
> > <alexandre.torgue@foss.st.com> wrote:
> >>
> >> Hi,
> >
> > Greg or Sasha won't know what to do with this. Not sure who follows
> > the stable list either. Quentin sent the patch, but is not the author.
> > Given the patch in question is about consistency between EFI memory
> > map boot and DT memory map boot, copying EFI knowledgeable folks would
> > help (Ard B for starters).
>
> Ok thanks for the tips. I add Ard in the loop.

Sigh. If it was only Ard I was suggesting I would have done that
myself. Now everyone on the patch in question and relevant lists are
Cc'ed.

>
> Ard, let me know if other people have to be directly added or if I have
> to resend to another mailing list.
>
> thanks
> alex
>
> >
> >>
> >> Since v5.4.102 I observe a regression on stm32mp1 platform: "no-map"
> >> reserved-memory regions are no more "reserved" and make part of the
> >> kernel System RAM. This causes allocation failure for devices which try
> >> to take a reserved-memory region.
> >>
> >> It has been introduced by the following path:
> >>
> >> "fdt: Properly handle "no-map" field in the memory region
> >> [ Upstream commit 86588296acbfb1591e92ba60221e95677ecadb43 ]"
> >> which replace memblock_remove by memblock_mark_nomap in no-map case.
> >>
> >> Reverting this patch it's fine.
> >>
> >> I add part of my DT (something is maybe wrong inside):
> >>
> >> memory@c0000000 {
> >>          reg = <0xc0000000 0x20000000>;
> >> };
> >>
> >> reserved-memory {
> >>          #address-cells = <1>;
> >>          #size-cells = <1>;
> >>          ranges;
> >>
> >>          gpu_reserved: gpu@d4000000 {
> >>                  reg = <0xd4000000 0x4000000>;
> >>                  no-map;
> >>          };
> >> };
> >>
> >> Sorry if this issue has already been raised and discussed.
> >>
> >> Thanks
> >> alex

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Ard Biesheuvel]

On Tue, 20 Apr 2021 at 17:54, Rob Herring <robh+dt@kernel.org> wrote:
>
> On Tue, Apr 20, 2021 at 10:12 AM Alexandre TORGUE
> <alexandre.torgue@foss.st.com> wrote:
> >
> >
> >
> > On 4/20/21 4:45 PM, Rob Herring wrote:
> > > On Tue, Apr 20, 2021 at 9:03 AM Alexandre TORGUE
> > > <alexandre.torgue@foss.st.com> wrote:
> > >>
> > >> Hi,
> > >
> > > Greg or Sasha won't know what to do with this. Not sure who follows
> > > the stable list either. Quentin sent the patch, but is not the author.
> > > Given the patch in question is about consistency between EFI memory
> > > map boot and DT memory map boot, copying EFI knowledgeable folks would
> > > help (Ard B for starters).
> >
> > Ok thanks for the tips. I add Ard in the loop.
>
> Sigh. If it was only Ard I was suggesting I would have done that
> myself. Now everyone on the patch in question and relevant lists are
> Cc'ed.
>

Thanks for the cc.

> >
> > Ard, let me know if other people have to be directly added or if I have
> > to resend to another mailing list.
> >
> > thanks
> > alex
> >
> > >
> > >>
> > >> Since v5.4.102 I observe a regression on stm32mp1 platform: "no-map"
> > >> reserved-memory regions are no more "reserved" and make part of the
> > >> kernel System RAM. This causes allocation failure for devices which try
> > >> to take a reserved-memory region.
> > >>
> > >> It has been introduced by the following path:
> > >>
> > >> "fdt: Properly handle "no-map" field in the memory region
> > >> [ Upstream commit 86588296acbfb1591e92ba60221e95677ecadb43 ]"
> > >> which replace memblock_remove by memblock_mark_nomap in no-map case.
> > >>

Why was this backported? It doesn't look like a bugfix to me.

> > >> Reverting this patch it's fine.
> > >>
> > >> I add part of my DT (something is maybe wrong inside):
> > >>
> > >> memory@c0000000 {
> > >>          reg = <0xc0000000 0x20000000>;
> > >> };
> > >>
> > >> reserved-memory {
> > >>          #address-cells = <1>;
> > >>          #size-cells = <1>;
> > >>          ranges;
> > >>
> > >>          gpu_reserved: gpu@d4000000 {
> > >>                  reg = <0xd4000000 0x4000000>;
> > >>                  no-map;
> > >>          };
> > >> };
> > >>
> > >> Sorry if this issue has already been raised and discussed.
> > >>

Could you explain why it fails? The region is clearly part of system
memory, and tagged as no-map, so the patch in itself is not
unreasonable. However, we obviously have code that relies on how the
region is represented in /proc/iomem, so it would be helpful to get
some insight into why this is the case.

In any case, the mere fact that this causes a regression should be
sufficient justification to revert/withdraw it from v5.4, as I don't
see a reason why it was merged there in the first place. (It has no
fixes tag or cc:stable)

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Ard Biesheuvel]

On Tue, 20 Apr 2021 at 17:54, Rob Herring <robh+dt@kernel.org> wrote:
>
> On Tue, Apr 20, 2021 at 10:12 AM Alexandre TORGUE
> <alexandre.torgue@foss.st.com> wrote:
> >
> >
> >
> > On 4/20/21 4:45 PM, Rob Herring wrote:
> > > On Tue, Apr 20, 2021 at 9:03 AM Alexandre TORGUE
> > > <alexandre.torgue@foss.st.com> wrote:
> > >>
> > >> Hi,
> > >
> > > Greg or Sasha won't know what to do with this. Not sure who follows
> > > the stable list either. Quentin sent the patch, but is not the author.
> > > Given the patch in question is about consistency between EFI memory
> > > map boot and DT memory map boot, copying EFI knowledgeable folks would
> > > help (Ard B for starters).
> >
> > Ok thanks for the tips. I add Ard in the loop.
>
> Sigh. If it was only Ard I was suggesting I would have done that
> myself. Now everyone on the patch in question and relevant lists are
> Cc'ed.
>

Thanks for the cc.

> >
> > Ard, let me know if other people have to be directly added or if I have
> > to resend to another mailing list.
> >
> > thanks
> > alex
> >
> > >
> > >>
> > >> Since v5.4.102 I observe a regression on stm32mp1 platform: "no-map"
> > >> reserved-memory regions are no more "reserved" and make part of the
> > >> kernel System RAM. This causes allocation failure for devices which try
> > >> to take a reserved-memory region.
> > >>
> > >> It has been introduced by the following path:
> > >>
> > >> "fdt: Properly handle "no-map" field in the memory region
> > >> [ Upstream commit 86588296acbfb1591e92ba60221e95677ecadb43 ]"
> > >> which replace memblock_remove by memblock_mark_nomap in no-map case.
> > >>

Why was this backported? It doesn't look like a bugfix to me.

> > >> Reverting this patch it's fine.
> > >>
> > >> I add part of my DT (something is maybe wrong inside):
> > >>
> > >> memory@c0000000 {
> > >>          reg = <0xc0000000 0x20000000>;
> > >> };
> > >>
> > >> reserved-memory {
> > >>          #address-cells = <1>;
> > >>          #size-cells = <1>;
> > >>          ranges;
> > >>
> > >>          gpu_reserved: gpu@d4000000 {
> > >>                  reg = <0xd4000000 0x4000000>;
> > >>                  no-map;
> > >>          };
> > >> };
> > >>
> > >> Sorry if this issue has already been raised and discussed.
> > >>

Could you explain why it fails? The region is clearly part of system
memory, and tagged as no-map, so the patch in itself is not
unreasonable. However, we obviously have code that relies on how the
region is represented in /proc/iomem, so it would be helpful to get
some insight into why this is the case.

In any case, the mere fact that this causes a regression should be
sufficient justification to revert/withdraw it from v5.4, as I don't
see a reason why it was merged there in the first place. (It has no
fixes tag or cc:stable)

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Florian Fainelli]

On 4/20/2021 9:10 AM, Ard Biesheuvel wrote:
> On Tue, 20 Apr 2021 at 17:54, Rob Herring <robh+dt@kernel.org> wrote:
>>
>> On Tue, Apr 20, 2021 at 10:12 AM Alexandre TORGUE
>> <alexandre.torgue@foss.st.com> wrote:
>>>
>>>
>>>
>>> On 4/20/21 4:45 PM, Rob Herring wrote:
>>>> On Tue, Apr 20, 2021 at 9:03 AM Alexandre TORGUE
>>>> <alexandre.torgue@foss.st.com> wrote:
>>>>>
>>>>> Hi,
>>>>
>>>> Greg or Sasha won't know what to do with this. Not sure who follows
>>>> the stable list either. Quentin sent the patch, but is not the author.
>>>> Given the patch in question is about consistency between EFI memory
>>>> map boot and DT memory map boot, copying EFI knowledgeable folks would
>>>> help (Ard B for starters).
>>>
>>> Ok thanks for the tips. I add Ard in the loop.
>>
>> Sigh. If it was only Ard I was suggesting I would have done that
>> myself. Now everyone on the patch in question and relevant lists are
>> Cc'ed.
>>
> 
> Thanks for the cc.
> 
>>>
>>> Ard, let me know if other people have to be directly added or if I have
>>> to resend to another mailing list.
>>>
>>> thanks
>>> alex
>>>
>>>>
>>>>>
>>>>> Since v5.4.102 I observe a regression on stm32mp1 platform: "no-map"
>>>>> reserved-memory regions are no more "reserved" and make part of the
>>>>> kernel System RAM. This causes allocation failure for devices which try
>>>>> to take a reserved-memory region.
>>>>>
>>>>> It has been introduced by the following path:
>>>>>
>>>>> "fdt: Properly handle "no-map" field in the memory region
>>>>> [ Upstream commit 86588296acbfb1591e92ba60221e95677ecadb43 ]"
>>>>> which replace memblock_remove by memblock_mark_nomap in no-map case.
>>>>>
> 
> Why was this backported? It doesn't look like a bugfix to me.
> 
>>>>> Reverting this patch it's fine.
>>>>>
>>>>> I add part of my DT (something is maybe wrong inside):
>>>>>
>>>>> memory@c0000000 {
>>>>>          reg = <0xc0000000 0x20000000>;
>>>>> };
>>>>>
>>>>> reserved-memory {
>>>>>          #address-cells = <1>;
>>>>>          #size-cells = <1>;
>>>>>          ranges;
>>>>>
>>>>>          gpu_reserved: gpu@d4000000 {
>>>>>                  reg = <0xd4000000 0x4000000>;
>>>>>                  no-map;
>>>>>          };
>>>>> };
>>>>>
>>>>> Sorry if this issue has already been raised and discussed.
>>>>>
> 
> Could you explain why it fails? The region is clearly part of system
> memory, and tagged as no-map, so the patch in itself is not
> unreasonable. However, we obviously have code that relies on how the
> region is represented in /proc/iomem, so it would be helpful to get
> some insight into why this is the case.

I do wonder as well, we have a 32MB "no-map" reserved memory region on
our platforms located at 0xfe000000. Without the offending commit,
/proc/iomem looks like this:

40000000-fdffefff : System RAM
  40008000-40ffffff : Kernel code
  41e00000-41ef1d77 : Kernel data
100000000-13fffffff : System RAM

and with the patch applied, we have this:

40000000-fdffefff : System RAM
  40008000-40ffffff : Kernel code
  41e00000-41ef3db7 : Kernel data
fdfff000-ffffffff : System RAM
100000000-13fffffff : System RAM

so we can now see that the region 0xfe000000 - 0xfffffff is also cobbled
up with the preceding region which is a mailbox between Linux and the
secure monitor at 0xfdfff000 and of size 4KB. It seems like there is

The memblock=debug outputs is also different:

[    0.000000] MEMBLOCK configuration:
[    0.000000]  memory size = 0xfdfff000 reserved size = 0x7ce4d20d
[    0.000000]  memory.cnt  = 0x2
[    0.000000]  memory[0x0]     [0x00000040000000-0x000000fdffefff],
0xbdfff000 bytes flags: 0x0
[    0.000000]  memory[0x1]     [0x00000100000000-0x0000013fffffff],
0x40000000 bytes flags: 0x0
[    0.000000]  reserved.cnt  = 0x6
[    0.000000]  reserved[0x0]   [0x00000040003000-0x0000004000e494],
0xb495 bytes flags: 0x0
[    0.000000]  reserved[0x1]   [0x00000040200000-0x00000041ef1d77],
0x1cf1d78 bytes flags: 0x0
[    0.000000]  reserved[0x2]   [0x00000045000000-0x000000450fffff],
0x100000 bytes flags: 0x0
[    0.000000]  reserved[0x3]   [0x00000047000000-0x0000004704ffff],
0x50000 bytes flags: 0x0
[    0.000000]  reserved[0x4]   [0x000000c2c00000-0x000000fdbfffff],
0x3b000000 bytes flags: 0x0
[    0.000000]  reserved[0x5]   [0x00000100000000-0x0000013fffffff],
0x40000000 bytes flags: 0x0

[    0.000000] MEMBLOCK configuration:
[    0.000000]  memory size = 0x100000000 reserved size = 0x7ca4f24d
[    0.000000]  memory.cnt  = 0x3
[    0.000000]  memory[0x0]     [0x00000040000000-0x000000fdffefff],
0xbdfff000 bytes flags: 0x0
[    0.000000]  memory[0x1]     [0x000000fdfff000-0x000000ffffffff],
0x2001000 bytes flags: 0x4
[    0.000000]  memory[0x2]     [0x00000100000000-0x0000013fffffff],
0x40000000 bytes flags: 0x0
[    0.000000]  reserved.cnt  = 0x6
[    0.000000]  reserved[0x0]   [0x00000040003000-0x0000004000e494],
0xb495 bytes flags: 0x0
[    0.000000]  reserved[0x1]   [0x00000040200000-0x00000041ef3db7],
0x1cf3db8 bytes flags: 0x0
[    0.000000]  reserved[0x2]   [0x00000045000000-0x000000450fffff],
0x100000 bytes flags: 0x0
[    0.000000]  reserved[0x3]   [0x00000047000000-0x0000004704ffff],
0x50000 bytes flags: 0x0
[    0.000000]  reserved[0x4]   [0x000000c3000000-0x000000fdbfffff],
0x3ac00000 bytes flags: 0x0
[    0.000000]  reserved[0x5]   [0x00000100000000-0x0000013fffffff],
0x40000000 bytes flags: 0x0

in the second case we can clearly see that the 32MB no-map region is now
considered as usable RAM.

Hope this helps.

> 
> In any case, the mere fact that this causes a regression should be
> sufficient justification to revert/withdraw it from v5.4, as I don't
> see a reason why it was merged there in the first place. (It has no
> fixes tag or cc:stable)

Agreed, however that means we still need to find out whether a more
recent kernel is also broken, I should be able to tell you that a little
later.
-- 
Florian

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Florian Fainelli]

On 4/20/2021 9:10 AM, Ard Biesheuvel wrote:
> On Tue, 20 Apr 2021 at 17:54, Rob Herring <robh+dt@kernel.org> wrote:
>>
>> On Tue, Apr 20, 2021 at 10:12 AM Alexandre TORGUE
>> <alexandre.torgue@foss.st.com> wrote:
>>>
>>>
>>>
>>> On 4/20/21 4:45 PM, Rob Herring wrote:
>>>> On Tue, Apr 20, 2021 at 9:03 AM Alexandre TORGUE
>>>> <alexandre.torgue@foss.st.com> wrote:
>>>>>
>>>>> Hi,
>>>>
>>>> Greg or Sasha won't know what to do with this. Not sure who follows
>>>> the stable list either. Quentin sent the patch, but is not the author.
>>>> Given the patch in question is about consistency between EFI memory
>>>> map boot and DT memory map boot, copying EFI knowledgeable folks would
>>>> help (Ard B for starters).
>>>
>>> Ok thanks for the tips. I add Ard in the loop.
>>
>> Sigh. If it was only Ard I was suggesting I would have done that
>> myself. Now everyone on the patch in question and relevant lists are
>> Cc'ed.
>>
> 
> Thanks for the cc.
> 
>>>
>>> Ard, let me know if other people have to be directly added or if I have
>>> to resend to another mailing list.
>>>
>>> thanks
>>> alex
>>>
>>>>
>>>>>
>>>>> Since v5.4.102 I observe a regression on stm32mp1 platform: "no-map"
>>>>> reserved-memory regions are no more "reserved" and make part of the
>>>>> kernel System RAM. This causes allocation failure for devices which try
>>>>> to take a reserved-memory region.
>>>>>
>>>>> It has been introduced by the following path:
>>>>>
>>>>> "fdt: Properly handle "no-map" field in the memory region
>>>>> [ Upstream commit 86588296acbfb1591e92ba60221e95677ecadb43 ]"
>>>>> which replace memblock_remove by memblock_mark_nomap in no-map case.
>>>>>
> 
> Why was this backported? It doesn't look like a bugfix to me.
> 
>>>>> Reverting this patch it's fine.
>>>>>
>>>>> I add part of my DT (something is maybe wrong inside):
>>>>>
>>>>> memory@c0000000 {
>>>>>          reg = <0xc0000000 0x20000000>;
>>>>> };
>>>>>
>>>>> reserved-memory {
>>>>>          #address-cells = <1>;
>>>>>          #size-cells = <1>;
>>>>>          ranges;
>>>>>
>>>>>          gpu_reserved: gpu@d4000000 {
>>>>>                  reg = <0xd4000000 0x4000000>;
>>>>>                  no-map;
>>>>>          };
>>>>> };
>>>>>
>>>>> Sorry if this issue has already been raised and discussed.
>>>>>
> 
> Could you explain why it fails? The region is clearly part of system
> memory, and tagged as no-map, so the patch in itself is not
> unreasonable. However, we obviously have code that relies on how the
> region is represented in /proc/iomem, so it would be helpful to get
> some insight into why this is the case.

I do wonder as well, we have a 32MB "no-map" reserved memory region on
our platforms located at 0xfe000000. Without the offending commit,
/proc/iomem looks like this:

40000000-fdffefff : System RAM
  40008000-40ffffff : Kernel code
  41e00000-41ef1d77 : Kernel data
100000000-13fffffff : System RAM

and with the patch applied, we have this:

40000000-fdffefff : System RAM
  40008000-40ffffff : Kernel code
  41e00000-41ef3db7 : Kernel data
fdfff000-ffffffff : System RAM
100000000-13fffffff : System RAM

so we can now see that the region 0xfe000000 - 0xfffffff is also cobbled
up with the preceding region which is a mailbox between Linux and the
secure monitor at 0xfdfff000 and of size 4KB. It seems like there is

The memblock=debug outputs is also different:

[    0.000000] MEMBLOCK configuration:
[    0.000000]  memory size = 0xfdfff000 reserved size = 0x7ce4d20d
[    0.000000]  memory.cnt  = 0x2
[    0.000000]  memory[0x0]     [0x00000040000000-0x000000fdffefff],
0xbdfff000 bytes flags: 0x0
[    0.000000]  memory[0x1]     [0x00000100000000-0x0000013fffffff],
0x40000000 bytes flags: 0x0
[    0.000000]  reserved.cnt  = 0x6
[    0.000000]  reserved[0x0]   [0x00000040003000-0x0000004000e494],
0xb495 bytes flags: 0x0
[    0.000000]  reserved[0x1]   [0x00000040200000-0x00000041ef1d77],
0x1cf1d78 bytes flags: 0x0
[    0.000000]  reserved[0x2]   [0x00000045000000-0x000000450fffff],
0x100000 bytes flags: 0x0
[    0.000000]  reserved[0x3]   [0x00000047000000-0x0000004704ffff],
0x50000 bytes flags: 0x0
[    0.000000]  reserved[0x4]   [0x000000c2c00000-0x000000fdbfffff],
0x3b000000 bytes flags: 0x0
[    0.000000]  reserved[0x5]   [0x00000100000000-0x0000013fffffff],
0x40000000 bytes flags: 0x0

[    0.000000] MEMBLOCK configuration:
[    0.000000]  memory size = 0x100000000 reserved size = 0x7ca4f24d
[    0.000000]  memory.cnt  = 0x3
[    0.000000]  memory[0x0]     [0x00000040000000-0x000000fdffefff],
0xbdfff000 bytes flags: 0x0
[    0.000000]  memory[0x1]     [0x000000fdfff000-0x000000ffffffff],
0x2001000 bytes flags: 0x4
[    0.000000]  memory[0x2]     [0x00000100000000-0x0000013fffffff],
0x40000000 bytes flags: 0x0
[    0.000000]  reserved.cnt  = 0x6
[    0.000000]  reserved[0x0]   [0x00000040003000-0x0000004000e494],
0xb495 bytes flags: 0x0
[    0.000000]  reserved[0x1]   [0x00000040200000-0x00000041ef3db7],
0x1cf3db8 bytes flags: 0x0
[    0.000000]  reserved[0x2]   [0x00000045000000-0x000000450fffff],
0x100000 bytes flags: 0x0
[    0.000000]  reserved[0x3]   [0x00000047000000-0x0000004704ffff],
0x50000 bytes flags: 0x0
[    0.000000]  reserved[0x4]   [0x000000c3000000-0x000000fdbfffff],
0x3ac00000 bytes flags: 0x0
[    0.000000]  reserved[0x5]   [0x00000100000000-0x0000013fffffff],
0x40000000 bytes flags: 0x0

in the second case we can clearly see that the 32MB no-map region is now
considered as usable RAM.

Hope this helps.

> 
> In any case, the mere fact that this causes a regression should be
> sufficient justification to revert/withdraw it from v5.4, as I don't
> see a reason why it was merged there in the first place. (It has no
> fixes tag or cc:stable)

Agreed, however that means we still need to find out whether a more
recent kernel is also broken, I should be able to tell you that a little
later.
-- 
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Quentin Perret]

On Tuesday 20 Apr 2021 at 09:33:56 (-0700), Florian Fainelli wrote:
> I do wonder as well, we have a 32MB "no-map" reserved memory region on
> our platforms located at 0xfe000000. Without the offending commit,
> /proc/iomem looks like this:
> 
> 40000000-fdffefff : System RAM
>   40008000-40ffffff : Kernel code
>   41e00000-41ef1d77 : Kernel data
> 100000000-13fffffff : System RAM
> 
> and with the patch applied, we have this:
> 
> 40000000-fdffefff : System RAM
>   40008000-40ffffff : Kernel code
>   41e00000-41ef3db7 : Kernel data
> fdfff000-ffffffff : System RAM
> 100000000-13fffffff : System RAM
> 
> so we can now see that the region 0xfe000000 - 0xfffffff is also cobbled
> up with the preceding region which is a mailbox between Linux and the
> secure monitor at 0xfdfff000 and of size 4KB. It seems like there is
> 
> The memblock=debug outputs is also different:
> 
> [    0.000000] MEMBLOCK configuration:
> [    0.000000]  memory size = 0xfdfff000 reserved size = 0x7ce4d20d
> [    0.000000]  memory.cnt  = 0x2
> [    0.000000]  memory[0x0]     [0x00000040000000-0x000000fdffefff],
> 0xbdfff000 bytes flags: 0x0
> [    0.000000]  memory[0x1]     [0x00000100000000-0x0000013fffffff],
> 0x40000000 bytes flags: 0x0
> [    0.000000]  reserved.cnt  = 0x6
> [    0.000000]  reserved[0x0]   [0x00000040003000-0x0000004000e494],
> 0xb495 bytes flags: 0x0
> [    0.000000]  reserved[0x1]   [0x00000040200000-0x00000041ef1d77],
> 0x1cf1d78 bytes flags: 0x0
> [    0.000000]  reserved[0x2]   [0x00000045000000-0x000000450fffff],
> 0x100000 bytes flags: 0x0
> [    0.000000]  reserved[0x3]   [0x00000047000000-0x0000004704ffff],
> 0x50000 bytes flags: 0x0
> [    0.000000]  reserved[0x4]   [0x000000c2c00000-0x000000fdbfffff],
> 0x3b000000 bytes flags: 0x0
> [    0.000000]  reserved[0x5]   [0x00000100000000-0x0000013fffffff],
> 0x40000000 bytes flags: 0x0
> 
> [    0.000000] MEMBLOCK configuration:
> [    0.000000]  memory size = 0x100000000 reserved size = 0x7ca4f24d
> [    0.000000]  memory.cnt  = 0x3
> [    0.000000]  memory[0x0]     [0x00000040000000-0x000000fdffefff],
> 0xbdfff000 bytes flags: 0x0
> [    0.000000]  memory[0x1]     [0x000000fdfff000-0x000000ffffffff],
> 0x2001000 bytes flags: 0x4
> [    0.000000]  memory[0x2]     [0x00000100000000-0x0000013fffffff],
> 0x40000000 bytes flags: 0x0
> [    0.000000]  reserved.cnt  = 0x6
> [    0.000000]  reserved[0x0]   [0x00000040003000-0x0000004000e494],
> 0xb495 bytes flags: 0x0
> [    0.000000]  reserved[0x1]   [0x00000040200000-0x00000041ef3db7],
> 0x1cf3db8 bytes flags: 0x0
> [    0.000000]  reserved[0x2]   [0x00000045000000-0x000000450fffff],
> 0x100000 bytes flags: 0x0
> [    0.000000]  reserved[0x3]   [0x00000047000000-0x0000004704ffff],
> 0x50000 bytes flags: 0x0
> [    0.000000]  reserved[0x4]   [0x000000c3000000-0x000000fdbfffff],
> 0x3ac00000 bytes flags: 0x0
> [    0.000000]  reserved[0x5]   [0x00000100000000-0x0000013fffffff],
> 0x40000000 bytes flags: 0x0
> 
> in the second case we can clearly see that the 32MB no-map region is now
> considered as usable RAM.
> 
> Hope this helps.
> 
> > 
> > In any case, the mere fact that this causes a regression should be
> > sufficient justification to revert/withdraw it from v5.4, as I don't
> > see a reason why it was merged there in the first place. (It has no
> > fixes tag or cc:stable)
> 
> Agreed, however that means we still need to find out whether a more
> recent kernel is also broken, I should be able to tell you that a little
> later.

FWIW I did test this on Qemu before posting. With 5.12-rc8 and a 1MiB
no-map region at 0x80000000, I have the following:

40000000-7fffffff : System RAM
  40210000-417fffff : Kernel code
  41800000-41daffff : reserved
  41db0000-4210ffff : Kernel data
  48000000-48008fff : reserved
80000000-800fffff : reserved
80100000-13fffffff : System RAM
  fa000000-ffffffff : reserved
  13b000000-13f5fffff : reserved
  13f6de000-13f77dfff : reserved
  13f77e000-13f77efff : reserved
  13f77f000-13f7dafff : reserved
  13f7dd000-13f7defff : reserved
  13f7df000-13f7dffff : reserved
  13f7e0000-13f7f3fff : reserved
  13f7f4000-13f7fdfff : reserved
  13f7fe000-13fffffff : reserved

If I remove the 'no-map' qualifier from DT, I get this:

40000000-13fffffff : System RAM
  40210000-417fffff : Kernel code
  41800000-41daffff : reserved
  41db0000-4210ffff : Kernel data
  48000000-48008fff : reserved
  80000000-800fffff : reserved
  fa000000-ffffffff : reserved
  13b000000-13f5fffff : reserved
  13f6de000-13f77dfff : reserved
  13f77e000-13f77efff : reserved
  13f77f000-13f7dafff : reserved
  13f7dd000-13f7defff : reserved
  13f7df000-13f7dffff : reserved
  13f7e0000-13f7f3fff : reserved
  13f7f4000-13f7fdfff : reserved
  13f7fe000-13fffffff : reserved

So this does seem to be working fine on my setup. I'll try again with
5.4 to see if I can repro.

Also, 8a5a75e5e9e5 ("of/fdt: Make sure no-map does not remove already
reserved regions") looks more likely to cause the issue observed here,
but that shouldn't be silent. I get the following error message in dmesg
if I if place the no-map region on top of the kernel image:

OF: fdt: Reserved memory: failed to reserve memory for node 'foobar@40210000': base 0x0000000040210000, size 1 MiB

Is that triggering on your end?

Thanks,
Quentin

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Quentin Perret]

On Tuesday 20 Apr 2021 at 09:33:56 (-0700), Florian Fainelli wrote:
> I do wonder as well, we have a 32MB "no-map" reserved memory region on
> our platforms located at 0xfe000000. Without the offending commit,
> /proc/iomem looks like this:
> 
> 40000000-fdffefff : System RAM
>   40008000-40ffffff : Kernel code
>   41e00000-41ef1d77 : Kernel data
> 100000000-13fffffff : System RAM
> 
> and with the patch applied, we have this:
> 
> 40000000-fdffefff : System RAM
>   40008000-40ffffff : Kernel code
>   41e00000-41ef3db7 : Kernel data
> fdfff000-ffffffff : System RAM
> 100000000-13fffffff : System RAM
> 
> so we can now see that the region 0xfe000000 - 0xfffffff is also cobbled
> up with the preceding region which is a mailbox between Linux and the
> secure monitor at 0xfdfff000 and of size 4KB. It seems like there is
> 
> The memblock=debug outputs is also different:
> 
> [    0.000000] MEMBLOCK configuration:
> [    0.000000]  memory size = 0xfdfff000 reserved size = 0x7ce4d20d
> [    0.000000]  memory.cnt  = 0x2
> [    0.000000]  memory[0x0]     [0x00000040000000-0x000000fdffefff],
> 0xbdfff000 bytes flags: 0x0
> [    0.000000]  memory[0x1]     [0x00000100000000-0x0000013fffffff],
> 0x40000000 bytes flags: 0x0
> [    0.000000]  reserved.cnt  = 0x6
> [    0.000000]  reserved[0x0]   [0x00000040003000-0x0000004000e494],
> 0xb495 bytes flags: 0x0
> [    0.000000]  reserved[0x1]   [0x00000040200000-0x00000041ef1d77],
> 0x1cf1d78 bytes flags: 0x0
> [    0.000000]  reserved[0x2]   [0x00000045000000-0x000000450fffff],
> 0x100000 bytes flags: 0x0
> [    0.000000]  reserved[0x3]   [0x00000047000000-0x0000004704ffff],
> 0x50000 bytes flags: 0x0
> [    0.000000]  reserved[0x4]   [0x000000c2c00000-0x000000fdbfffff],
> 0x3b000000 bytes flags: 0x0
> [    0.000000]  reserved[0x5]   [0x00000100000000-0x0000013fffffff],
> 0x40000000 bytes flags: 0x0
> 
> [    0.000000] MEMBLOCK configuration:
> [    0.000000]  memory size = 0x100000000 reserved size = 0x7ca4f24d
> [    0.000000]  memory.cnt  = 0x3
> [    0.000000]  memory[0x0]     [0x00000040000000-0x000000fdffefff],
> 0xbdfff000 bytes flags: 0x0
> [    0.000000]  memory[0x1]     [0x000000fdfff000-0x000000ffffffff],
> 0x2001000 bytes flags: 0x4
> [    0.000000]  memory[0x2]     [0x00000100000000-0x0000013fffffff],
> 0x40000000 bytes flags: 0x0
> [    0.000000]  reserved.cnt  = 0x6
> [    0.000000]  reserved[0x0]   [0x00000040003000-0x0000004000e494],
> 0xb495 bytes flags: 0x0
> [    0.000000]  reserved[0x1]   [0x00000040200000-0x00000041ef3db7],
> 0x1cf3db8 bytes flags: 0x0
> [    0.000000]  reserved[0x2]   [0x00000045000000-0x000000450fffff],
> 0x100000 bytes flags: 0x0
> [    0.000000]  reserved[0x3]   [0x00000047000000-0x0000004704ffff],
> 0x50000 bytes flags: 0x0
> [    0.000000]  reserved[0x4]   [0x000000c3000000-0x000000fdbfffff],
> 0x3ac00000 bytes flags: 0x0
> [    0.000000]  reserved[0x5]   [0x00000100000000-0x0000013fffffff],
> 0x40000000 bytes flags: 0x0
> 
> in the second case we can clearly see that the 32MB no-map region is now
> considered as usable RAM.
> 
> Hope this helps.
> 
> > 
> > In any case, the mere fact that this causes a regression should be
> > sufficient justification to revert/withdraw it from v5.4, as I don't
> > see a reason why it was merged there in the first place. (It has no
> > fixes tag or cc:stable)
> 
> Agreed, however that means we still need to find out whether a more
> recent kernel is also broken, I should be able to tell you that a little
> later.

FWIW I did test this on Qemu before posting. With 5.12-rc8 and a 1MiB
no-map region at 0x80000000, I have the following:

40000000-7fffffff : System RAM
  40210000-417fffff : Kernel code
  41800000-41daffff : reserved
  41db0000-4210ffff : Kernel data
  48000000-48008fff : reserved
80000000-800fffff : reserved
80100000-13fffffff : System RAM
  fa000000-ffffffff : reserved
  13b000000-13f5fffff : reserved
  13f6de000-13f77dfff : reserved
  13f77e000-13f77efff : reserved
  13f77f000-13f7dafff : reserved
  13f7dd000-13f7defff : reserved
  13f7df000-13f7dffff : reserved
  13f7e0000-13f7f3fff : reserved
  13f7f4000-13f7fdfff : reserved
  13f7fe000-13fffffff : reserved

If I remove the 'no-map' qualifier from DT, I get this:

40000000-13fffffff : System RAM
  40210000-417fffff : Kernel code
  41800000-41daffff : reserved
  41db0000-4210ffff : Kernel data
  48000000-48008fff : reserved
  80000000-800fffff : reserved
  fa000000-ffffffff : reserved
  13b000000-13f5fffff : reserved
  13f6de000-13f77dfff : reserved
  13f77e000-13f77efff : reserved
  13f77f000-13f7dafff : reserved
  13f7dd000-13f7defff : reserved
  13f7df000-13f7dffff : reserved
  13f7e0000-13f7f3fff : reserved
  13f7f4000-13f7fdfff : reserved
  13f7fe000-13fffffff : reserved

So this does seem to be working fine on my setup. I'll try again with
5.4 to see if I can repro.

Also, 8a5a75e5e9e5 ("of/fdt: Make sure no-map does not remove already
reserved regions") looks more likely to cause the issue observed here,
but that shouldn't be silent. I get the following error message in dmesg
if I if place the no-map region on top of the kernel image:

OF: fdt: Reserved memory: failed to reserve memory for node 'foobar@40210000': base 0x0000000040210000, size 1 MiB

Is that triggering on your end?

Thanks,
Quentin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Quentin Perret]

On Wednesday 21 Apr 2021 at 08:31:00 (+0000), Quentin Perret wrote:
> FWIW I did test this on Qemu before posting. With 5.12-rc8 and a 1MiB
> no-map region at 0x80000000, I have the following:
> 
> 40000000-7fffffff : System RAM
>   40210000-417fffff : Kernel code
>   41800000-41daffff : reserved
>   41db0000-4210ffff : Kernel data
>   48000000-48008fff : reserved
> 80000000-800fffff : reserved
> 80100000-13fffffff : System RAM
>   fa000000-ffffffff : reserved
>   13b000000-13f5fffff : reserved
>   13f6de000-13f77dfff : reserved
>   13f77e000-13f77efff : reserved
>   13f77f000-13f7dafff : reserved
>   13f7dd000-13f7defff : reserved
>   13f7df000-13f7dffff : reserved
>   13f7e0000-13f7f3fff : reserved
>   13f7f4000-13f7fdfff : reserved
>   13f7fe000-13fffffff : reserved
> 
> If I remove the 'no-map' qualifier from DT, I get this:
> 
> 40000000-13fffffff : System RAM
>   40210000-417fffff : Kernel code
>   41800000-41daffff : reserved
>   41db0000-4210ffff : Kernel data
>   48000000-48008fff : reserved
>   80000000-800fffff : reserved
>   fa000000-ffffffff : reserved
>   13b000000-13f5fffff : reserved
>   13f6de000-13f77dfff : reserved
>   13f77e000-13f77efff : reserved
>   13f77f000-13f7dafff : reserved
>   13f7dd000-13f7defff : reserved
>   13f7df000-13f7dffff : reserved
>   13f7e0000-13f7f3fff : reserved
>   13f7f4000-13f7fdfff : reserved
>   13f7fe000-13fffffff : reserved
> 
> So this does seem to be working fine on my setup. I'll try again with
> 5.4 to see if I can repro.

I just ran the same experiment on v5.4.102 which is where the
regression was reported, and I'm seeing the same correct result...

> Also, 8a5a75e5e9e5 ("of/fdt: Make sure no-map does not remove already
> reserved regions") looks more likely to cause the issue observed here,
> but that shouldn't be silent. I get the following error message in dmesg
> if I if place the no-map region on top of the kernel image:
> 
> OF: fdt: Reserved memory: failed to reserve memory for node 'foobar@40210000': base 0x0000000040210000, size 1 MiB
> 
> Is that triggering on your end?

So that really sounds like the cause of the issue here, though arguably
this should be indicative a something funny in the DT.

Thanks,
Quentin

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Quentin Perret]

On Wednesday 21 Apr 2021 at 08:31:00 (+0000), Quentin Perret wrote:
> FWIW I did test this on Qemu before posting. With 5.12-rc8 and a 1MiB
> no-map region at 0x80000000, I have the following:
> 
> 40000000-7fffffff : System RAM
>   40210000-417fffff : Kernel code
>   41800000-41daffff : reserved
>   41db0000-4210ffff : Kernel data
>   48000000-48008fff : reserved
> 80000000-800fffff : reserved
> 80100000-13fffffff : System RAM
>   fa000000-ffffffff : reserved
>   13b000000-13f5fffff : reserved
>   13f6de000-13f77dfff : reserved
>   13f77e000-13f77efff : reserved
>   13f77f000-13f7dafff : reserved
>   13f7dd000-13f7defff : reserved
>   13f7df000-13f7dffff : reserved
>   13f7e0000-13f7f3fff : reserved
>   13f7f4000-13f7fdfff : reserved
>   13f7fe000-13fffffff : reserved
> 
> If I remove the 'no-map' qualifier from DT, I get this:
> 
> 40000000-13fffffff : System RAM
>   40210000-417fffff : Kernel code
>   41800000-41daffff : reserved
>   41db0000-4210ffff : Kernel data
>   48000000-48008fff : reserved
>   80000000-800fffff : reserved
>   fa000000-ffffffff : reserved
>   13b000000-13f5fffff : reserved
>   13f6de000-13f77dfff : reserved
>   13f77e000-13f77efff : reserved
>   13f77f000-13f7dafff : reserved
>   13f7dd000-13f7defff : reserved
>   13f7df000-13f7dffff : reserved
>   13f7e0000-13f7f3fff : reserved
>   13f7f4000-13f7fdfff : reserved
>   13f7fe000-13fffffff : reserved
> 
> So this does seem to be working fine on my setup. I'll try again with
> 5.4 to see if I can repro.

I just ran the same experiment on v5.4.102 which is where the
regression was reported, and I'm seeing the same correct result...

> Also, 8a5a75e5e9e5 ("of/fdt: Make sure no-map does not remove already
> reserved regions") looks more likely to cause the issue observed here,
> but that shouldn't be silent. I get the following error message in dmesg
> if I if place the no-map region on top of the kernel image:
> 
> OF: fdt: Reserved memory: failed to reserve memory for node 'foobar@40210000': base 0x0000000040210000, size 1 MiB
> 
> Is that triggering on your end?

So that really sounds like the cause of the issue here, though arguably
this should be indicative a something funny in the DT.

Thanks,
Quentin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Florian Fainelli]

On 4/21/2021 1:31 AM, Quentin Perret wrote:
> On Tuesday 20 Apr 2021 at 09:33:56 (-0700), Florian Fainelli wrote:
>> I do wonder as well, we have a 32MB "no-map" reserved memory region on
>> our platforms located at 0xfe000000. Without the offending commit,
>> /proc/iomem looks like this:
>>
>> 40000000-fdffefff : System RAM
>>   40008000-40ffffff : Kernel code
>>   41e00000-41ef1d77 : Kernel data
>> 100000000-13fffffff : System RAM
>>
>> and with the patch applied, we have this:
>>
>> 40000000-fdffefff : System RAM
>>   40008000-40ffffff : Kernel code
>>   41e00000-41ef3db7 : Kernel data
>> fdfff000-ffffffff : System RAM
>> 100000000-13fffffff : System RAM
>>
>> so we can now see that the region 0xfe000000 - 0xfffffff is also cobbled
>> up with the preceding region which is a mailbox between Linux and the
>> secure monitor at 0xfdfff000 and of size 4KB. It seems like there is
>>
>> The memblock=debug outputs is also different:
>>
>> [    0.000000] MEMBLOCK configuration:
>> [    0.000000]  memory size = 0xfdfff000 reserved size = 0x7ce4d20d
>> [    0.000000]  memory.cnt  = 0x2
>> [    0.000000]  memory[0x0]     [0x00000040000000-0x000000fdffefff],
>> 0xbdfff000 bytes flags: 0x0
>> [    0.000000]  memory[0x1]     [0x00000100000000-0x0000013fffffff],
>> 0x40000000 bytes flags: 0x0
>> [    0.000000]  reserved.cnt  = 0x6
>> [    0.000000]  reserved[0x0]   [0x00000040003000-0x0000004000e494],
>> 0xb495 bytes flags: 0x0
>> [    0.000000]  reserved[0x1]   [0x00000040200000-0x00000041ef1d77],
>> 0x1cf1d78 bytes flags: 0x0
>> [    0.000000]  reserved[0x2]   [0x00000045000000-0x000000450fffff],
>> 0x100000 bytes flags: 0x0
>> [    0.000000]  reserved[0x3]   [0x00000047000000-0x0000004704ffff],
>> 0x50000 bytes flags: 0x0
>> [    0.000000]  reserved[0x4]   [0x000000c2c00000-0x000000fdbfffff],
>> 0x3b000000 bytes flags: 0x0
>> [    0.000000]  reserved[0x5]   [0x00000100000000-0x0000013fffffff],
>> 0x40000000 bytes flags: 0x0
>>
>> [    0.000000] MEMBLOCK configuration:
>> [    0.000000]  memory size = 0x100000000 reserved size = 0x7ca4f24d
>> [    0.000000]  memory.cnt  = 0x3
>> [    0.000000]  memory[0x0]     [0x00000040000000-0x000000fdffefff],
>> 0xbdfff000 bytes flags: 0x0
>> [    0.000000]  memory[0x1]     [0x000000fdfff000-0x000000ffffffff],
>> 0x2001000 bytes flags: 0x4
>> [    0.000000]  memory[0x2]     [0x00000100000000-0x0000013fffffff],
>> 0x40000000 bytes flags: 0x0
>> [    0.000000]  reserved.cnt  = 0x6
>> [    0.000000]  reserved[0x0]   [0x00000040003000-0x0000004000e494],
>> 0xb495 bytes flags: 0x0
>> [    0.000000]  reserved[0x1]   [0x00000040200000-0x00000041ef3db7],
>> 0x1cf3db8 bytes flags: 0x0
>> [    0.000000]  reserved[0x2]   [0x00000045000000-0x000000450fffff],
>> 0x100000 bytes flags: 0x0
>> [    0.000000]  reserved[0x3]   [0x00000047000000-0x0000004704ffff],
>> 0x50000 bytes flags: 0x0
>> [    0.000000]  reserved[0x4]   [0x000000c3000000-0x000000fdbfffff],
>> 0x3ac00000 bytes flags: 0x0
>> [    0.000000]  reserved[0x5]   [0x00000100000000-0x0000013fffffff],
>> 0x40000000 bytes flags: 0x0
>>
>> in the second case we can clearly see that the 32MB no-map region is now
>> considered as usable RAM.
>>
>> Hope this helps.
>>
>>>
>>> In any case, the mere fact that this causes a regression should be
>>> sufficient justification to revert/withdraw it from v5.4, as I don't
>>> see a reason why it was merged there in the first place. (It has no
>>> fixes tag or cc:stable)
>>
>> Agreed, however that means we still need to find out whether a more
>> recent kernel is also broken, I should be able to tell you that a little
>> later.
> 
> FWIW I did test this on Qemu before posting. With 5.12-rc8 and a 1MiB
> no-map region at 0x80000000, I have the following:
> 
> 40000000-7fffffff : System RAM
>   40210000-417fffff : Kernel code
>   41800000-41daffff : reserved
>   41db0000-4210ffff : Kernel data
>   48000000-48008fff : reserved
> 80000000-800fffff : reserved
> 80100000-13fffffff : System RAM
>   fa000000-ffffffff : reserved
>   13b000000-13f5fffff : reserved
>   13f6de000-13f77dfff : reserved
>   13f77e000-13f77efff : reserved
>   13f77f000-13f7dafff : reserved
>   13f7dd000-13f7defff : reserved
>   13f7df000-13f7dffff : reserved
>   13f7e0000-13f7f3fff : reserved
>   13f7f4000-13f7fdfff : reserved
>   13f7fe000-13fffffff : reserved
> 
> If I remove the 'no-map' qualifier from DT, I get this:
> 
> 40000000-13fffffff : System RAM
>   40210000-417fffff : Kernel code
>   41800000-41daffff : reserved
>   41db0000-4210ffff : Kernel data
>   48000000-48008fff : reserved
>   80000000-800fffff : reserved
>   fa000000-ffffffff : reserved
>   13b000000-13f5fffff : reserved
>   13f6de000-13f77dfff : reserved
>   13f77e000-13f77efff : reserved
>   13f77f000-13f7dafff : reserved
>   13f7dd000-13f7defff : reserved
>   13f7df000-13f7dffff : reserved
>   13f7e0000-13f7f3fff : reserved
>   13f7f4000-13f7fdfff : reserved
>   13f7fe000-13fffffff : reserved
> 
> So this does seem to be working fine on my setup. I'll try again with
> 5.4 to see if I can repro.
> 
> Also, 8a5a75e5e9e5 ("of/fdt: Make sure no-map does not remove already
> reserved regions") looks more likely to cause the issue observed here,
> but that shouldn't be silent. I get the following error message in dmesg
> if I if place the no-map region on top of the kernel image:
> 
> OF: fdt: Reserved memory: failed to reserve memory for node 'foobar@40210000': base 0x0000000040210000, size 1 MiB
> 
> Is that triggering on your end?

It is not, otherwise I would have noticed earlier, can you try the same
thing that happens on my platform with a reserved region (without
no-map) adjacent to a reserved region with 'no-map'? I will test
different and newer kernels than 5.4 today to find out if this is still
a problem with upstream. I could confirm that v4.9.259 also have this
problem now.
-- 
Florian

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Florian Fainelli]

On 4/21/2021 1:31 AM, Quentin Perret wrote:
> On Tuesday 20 Apr 2021 at 09:33:56 (-0700), Florian Fainelli wrote:
>> I do wonder as well, we have a 32MB "no-map" reserved memory region on
>> our platforms located at 0xfe000000. Without the offending commit,
>> /proc/iomem looks like this:
>>
>> 40000000-fdffefff : System RAM
>>   40008000-40ffffff : Kernel code
>>   41e00000-41ef1d77 : Kernel data
>> 100000000-13fffffff : System RAM
>>
>> and with the patch applied, we have this:
>>
>> 40000000-fdffefff : System RAM
>>   40008000-40ffffff : Kernel code
>>   41e00000-41ef3db7 : Kernel data
>> fdfff000-ffffffff : System RAM
>> 100000000-13fffffff : System RAM
>>
>> so we can now see that the region 0xfe000000 - 0xfffffff is also cobbled
>> up with the preceding region which is a mailbox between Linux and the
>> secure monitor at 0xfdfff000 and of size 4KB. It seems like there is
>>
>> The memblock=debug outputs is also different:
>>
>> [    0.000000] MEMBLOCK configuration:
>> [    0.000000]  memory size = 0xfdfff000 reserved size = 0x7ce4d20d
>> [    0.000000]  memory.cnt  = 0x2
>> [    0.000000]  memory[0x0]     [0x00000040000000-0x000000fdffefff],
>> 0xbdfff000 bytes flags: 0x0
>> [    0.000000]  memory[0x1]     [0x00000100000000-0x0000013fffffff],
>> 0x40000000 bytes flags: 0x0
>> [    0.000000]  reserved.cnt  = 0x6
>> [    0.000000]  reserved[0x0]   [0x00000040003000-0x0000004000e494],
>> 0xb495 bytes flags: 0x0
>> [    0.000000]  reserved[0x1]   [0x00000040200000-0x00000041ef1d77],
>> 0x1cf1d78 bytes flags: 0x0
>> [    0.000000]  reserved[0x2]   [0x00000045000000-0x000000450fffff],
>> 0x100000 bytes flags: 0x0
>> [    0.000000]  reserved[0x3]   [0x00000047000000-0x0000004704ffff],
>> 0x50000 bytes flags: 0x0
>> [    0.000000]  reserved[0x4]   [0x000000c2c00000-0x000000fdbfffff],
>> 0x3b000000 bytes flags: 0x0
>> [    0.000000]  reserved[0x5]   [0x00000100000000-0x0000013fffffff],
>> 0x40000000 bytes flags: 0x0
>>
>> [    0.000000] MEMBLOCK configuration:
>> [    0.000000]  memory size = 0x100000000 reserved size = 0x7ca4f24d
>> [    0.000000]  memory.cnt  = 0x3
>> [    0.000000]  memory[0x0]     [0x00000040000000-0x000000fdffefff],
>> 0xbdfff000 bytes flags: 0x0
>> [    0.000000]  memory[0x1]     [0x000000fdfff000-0x000000ffffffff],
>> 0x2001000 bytes flags: 0x4
>> [    0.000000]  memory[0x2]     [0x00000100000000-0x0000013fffffff],
>> 0x40000000 bytes flags: 0x0
>> [    0.000000]  reserved.cnt  = 0x6
>> [    0.000000]  reserved[0x0]   [0x00000040003000-0x0000004000e494],
>> 0xb495 bytes flags: 0x0
>> [    0.000000]  reserved[0x1]   [0x00000040200000-0x00000041ef3db7],
>> 0x1cf3db8 bytes flags: 0x0
>> [    0.000000]  reserved[0x2]   [0x00000045000000-0x000000450fffff],
>> 0x100000 bytes flags: 0x0
>> [    0.000000]  reserved[0x3]   [0x00000047000000-0x0000004704ffff],
>> 0x50000 bytes flags: 0x0
>> [    0.000000]  reserved[0x4]   [0x000000c3000000-0x000000fdbfffff],
>> 0x3ac00000 bytes flags: 0x0
>> [    0.000000]  reserved[0x5]   [0x00000100000000-0x0000013fffffff],
>> 0x40000000 bytes flags: 0x0
>>
>> in the second case we can clearly see that the 32MB no-map region is now
>> considered as usable RAM.
>>
>> Hope this helps.
>>
>>>
>>> In any case, the mere fact that this causes a regression should be
>>> sufficient justification to revert/withdraw it from v5.4, as I don't
>>> see a reason why it was merged there in the first place. (It has no
>>> fixes tag or cc:stable)
>>
>> Agreed, however that means we still need to find out whether a more
>> recent kernel is also broken, I should be able to tell you that a little
>> later.
> 
> FWIW I did test this on Qemu before posting. With 5.12-rc8 and a 1MiB
> no-map region at 0x80000000, I have the following:
> 
> 40000000-7fffffff : System RAM
>   40210000-417fffff : Kernel code
>   41800000-41daffff : reserved
>   41db0000-4210ffff : Kernel data
>   48000000-48008fff : reserved
> 80000000-800fffff : reserved
> 80100000-13fffffff : System RAM
>   fa000000-ffffffff : reserved
>   13b000000-13f5fffff : reserved
>   13f6de000-13f77dfff : reserved
>   13f77e000-13f77efff : reserved
>   13f77f000-13f7dafff : reserved
>   13f7dd000-13f7defff : reserved
>   13f7df000-13f7dffff : reserved
>   13f7e0000-13f7f3fff : reserved
>   13f7f4000-13f7fdfff : reserved
>   13f7fe000-13fffffff : reserved
> 
> If I remove the 'no-map' qualifier from DT, I get this:
> 
> 40000000-13fffffff : System RAM
>   40210000-417fffff : Kernel code
>   41800000-41daffff : reserved
>   41db0000-4210ffff : Kernel data
>   48000000-48008fff : reserved
>   80000000-800fffff : reserved
>   fa000000-ffffffff : reserved
>   13b000000-13f5fffff : reserved
>   13f6de000-13f77dfff : reserved
>   13f77e000-13f77efff : reserved
>   13f77f000-13f7dafff : reserved
>   13f7dd000-13f7defff : reserved
>   13f7df000-13f7dffff : reserved
>   13f7e0000-13f7f3fff : reserved
>   13f7f4000-13f7fdfff : reserved
>   13f7fe000-13fffffff : reserved
> 
> So this does seem to be working fine on my setup. I'll try again with
> 5.4 to see if I can repro.
> 
> Also, 8a5a75e5e9e5 ("of/fdt: Make sure no-map does not remove already
> reserved regions") looks more likely to cause the issue observed here,
> but that shouldn't be silent. I get the following error message in dmesg
> if I if place the no-map region on top of the kernel image:
> 
> OF: fdt: Reserved memory: failed to reserve memory for node 'foobar@40210000': base 0x0000000040210000, size 1 MiB
> 
> Is that triggering on your end?

It is not, otherwise I would have noticed earlier, can you try the same
thing that happens on my platform with a reserved region (without
no-map) adjacent to a reserved region with 'no-map'? I will test
different and newer kernels than 5.4 today to find out if this is still
a problem with upstream. I could confirm that v4.9.259 also have this
problem now.
-- 
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Florian Fainelli]

On 4/21/2021 7:33 AM, Florian Fainelli wrote:
> 
> 
> On 4/21/2021 1:31 AM, Quentin Perret wrote:
>> On Tuesday 20 Apr 2021 at 09:33:56 (-0700), Florian Fainelli wrote:
>>> I do wonder as well, we have a 32MB "no-map" reserved memory region on
>>> our platforms located at 0xfe000000. Without the offending commit,
>>> /proc/iomem looks like this:
>>>
>>> 40000000-fdffefff : System RAM
>>>   40008000-40ffffff : Kernel code
>>>   41e00000-41ef1d77 : Kernel data
>>> 100000000-13fffffff : System RAM
>>>
>>> and with the patch applied, we have this:
>>>
>>> 40000000-fdffefff : System RAM
>>>   40008000-40ffffff : Kernel code
>>>   41e00000-41ef3db7 : Kernel data
>>> fdfff000-ffffffff : System RAM
>>> 100000000-13fffffff : System RAM
>>>
>>> so we can now see that the region 0xfe000000 - 0xfffffff is also cobbled
>>> up with the preceding region which is a mailbox between Linux and the
>>> secure monitor at 0xfdfff000 and of size 4KB. It seems like there is
>>>
>>> The memblock=debug outputs is also different:
>>>
>>> [    0.000000] MEMBLOCK configuration:
>>> [    0.000000]  memory size = 0xfdfff000 reserved size = 0x7ce4d20d
>>> [    0.000000]  memory.cnt  = 0x2
>>> [    0.000000]  memory[0x0]     [0x00000040000000-0x000000fdffefff],
>>> 0xbdfff000 bytes flags: 0x0
>>> [    0.000000]  memory[0x1]     [0x00000100000000-0x0000013fffffff],
>>> 0x40000000 bytes flags: 0x0
>>> [    0.000000]  reserved.cnt  = 0x6
>>> [    0.000000]  reserved[0x0]   [0x00000040003000-0x0000004000e494],
>>> 0xb495 bytes flags: 0x0
>>> [    0.000000]  reserved[0x1]   [0x00000040200000-0x00000041ef1d77],
>>> 0x1cf1d78 bytes flags: 0x0
>>> [    0.000000]  reserved[0x2]   [0x00000045000000-0x000000450fffff],
>>> 0x100000 bytes flags: 0x0
>>> [    0.000000]  reserved[0x3]   [0x00000047000000-0x0000004704ffff],
>>> 0x50000 bytes flags: 0x0
>>> [    0.000000]  reserved[0x4]   [0x000000c2c00000-0x000000fdbfffff],
>>> 0x3b000000 bytes flags: 0x0
>>> [    0.000000]  reserved[0x5]   [0x00000100000000-0x0000013fffffff],
>>> 0x40000000 bytes flags: 0x0
>>>
>>> [    0.000000] MEMBLOCK configuration:
>>> [    0.000000]  memory size = 0x100000000 reserved size = 0x7ca4f24d
>>> [    0.000000]  memory.cnt  = 0x3
>>> [    0.000000]  memory[0x0]     [0x00000040000000-0x000000fdffefff],
>>> 0xbdfff000 bytes flags: 0x0
>>> [    0.000000]  memory[0x1]     [0x000000fdfff000-0x000000ffffffff],
>>> 0x2001000 bytes flags: 0x4
>>> [    0.000000]  memory[0x2]     [0x00000100000000-0x0000013fffffff],
>>> 0x40000000 bytes flags: 0x0
>>> [    0.000000]  reserved.cnt  = 0x6
>>> [    0.000000]  reserved[0x0]   [0x00000040003000-0x0000004000e494],
>>> 0xb495 bytes flags: 0x0
>>> [    0.000000]  reserved[0x1]   [0x00000040200000-0x00000041ef3db7],
>>> 0x1cf3db8 bytes flags: 0x0
>>> [    0.000000]  reserved[0x2]   [0x00000045000000-0x000000450fffff],
>>> 0x100000 bytes flags: 0x0
>>> [    0.000000]  reserved[0x3]   [0x00000047000000-0x0000004704ffff],
>>> 0x50000 bytes flags: 0x0
>>> [    0.000000]  reserved[0x4]   [0x000000c3000000-0x000000fdbfffff],
>>> 0x3ac00000 bytes flags: 0x0
>>> [    0.000000]  reserved[0x5]   [0x00000100000000-0x0000013fffffff],
>>> 0x40000000 bytes flags: 0x0
>>>
>>> in the second case we can clearly see that the 32MB no-map region is now
>>> considered as usable RAM.
>>>
>>> Hope this helps.
>>>
>>>>
>>>> In any case, the mere fact that this causes a regression should be
>>>> sufficient justification to revert/withdraw it from v5.4, as I don't
>>>> see a reason why it was merged there in the first place. (It has no
>>>> fixes tag or cc:stable)
>>>
>>> Agreed, however that means we still need to find out whether a more
>>> recent kernel is also broken, I should be able to tell you that a little
>>> later.
>>
>> FWIW I did test this on Qemu before posting. With 5.12-rc8 and a 1MiB
>> no-map region at 0x80000000, I have the following:
>>
>> 40000000-7fffffff : System RAM
>>   40210000-417fffff : Kernel code
>>   41800000-41daffff : reserved
>>   41db0000-4210ffff : Kernel data
>>   48000000-48008fff : reserved
>> 80000000-800fffff : reserved
>> 80100000-13fffffff : System RAM
>>   fa000000-ffffffff : reserved
>>   13b000000-13f5fffff : reserved
>>   13f6de000-13f77dfff : reserved
>>   13f77e000-13f77efff : reserved
>>   13f77f000-13f7dafff : reserved
>>   13f7dd000-13f7defff : reserved
>>   13f7df000-13f7dffff : reserved
>>   13f7e0000-13f7f3fff : reserved
>>   13f7f4000-13f7fdfff : reserved
>>   13f7fe000-13fffffff : reserved
>>
>> If I remove the 'no-map' qualifier from DT, I get this:
>>
>> 40000000-13fffffff : System RAM
>>   40210000-417fffff : Kernel code
>>   41800000-41daffff : reserved
>>   41db0000-4210ffff : Kernel data
>>   48000000-48008fff : reserved
>>   80000000-800fffff : reserved
>>   fa000000-ffffffff : reserved
>>   13b000000-13f5fffff : reserved
>>   13f6de000-13f77dfff : reserved
>>   13f77e000-13f77efff : reserved
>>   13f77f000-13f7dafff : reserved
>>   13f7dd000-13f7defff : reserved
>>   13f7df000-13f7dffff : reserved
>>   13f7e0000-13f7f3fff : reserved
>>   13f7f4000-13f7fdfff : reserved
>>   13f7fe000-13fffffff : reserved
>>
>> So this does seem to be working fine on my setup. I'll try again with
>> 5.4 to see if I can repro.
>>
>> Also, 8a5a75e5e9e5 ("of/fdt: Make sure no-map does not remove already
>> reserved regions") looks more likely to cause the issue observed here,
>> but that shouldn't be silent. I get the following error message in dmesg
>> if I if place the no-map region on top of the kernel image:
>>
>> OF: fdt: Reserved memory: failed to reserve memory for node 'foobar@40210000': base 0x0000000040210000, size 1 MiB
>>
>> Is that triggering on your end?
> 
> It is not, otherwise I would have noticed earlier, can you try the same
> thing that happens on my platform with a reserved region (without
> no-map) adjacent to a reserved region with 'no-map'? I will test
> different and newer kernels than 5.4 today to find out if this is still
> a problem with upstream. I could confirm that v4.9.259 also have this
> problem now.

5.10.31 works correctly and shows the following for my platform:

40000000-fdffefff : System RAM
  40200000-40eaffff : Kernel code
  40eb0000-4237ffff : reserved
  42380000-425affff : Kernel data
  45000000-450fffff : reserved
  47000000-4704ffff : reserved
  4761e000-47624fff : reserved
  f8c00000-fdbfffff : reserved
fdfff000-ffffffff : reserved
100000000-13fffffff : System RAM
  13b000000-13effffff : reserved
  13f114000-13f173fff : reserved
  13f174000-13f774fff : reserved
  13f775000-13f7e8fff : reserved
  13f7eb000-13f7ecfff : reserved
  13f7ed000-13f7effff : reserved
  13f7f0000-13fffffff : reserved
-- 
Florian

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Florian Fainelli]

On 4/21/2021 7:33 AM, Florian Fainelli wrote:
> 
> 
> On 4/21/2021 1:31 AM, Quentin Perret wrote:
>> On Tuesday 20 Apr 2021 at 09:33:56 (-0700), Florian Fainelli wrote:
>>> I do wonder as well, we have a 32MB "no-map" reserved memory region on
>>> our platforms located at 0xfe000000. Without the offending commit,
>>> /proc/iomem looks like this:
>>>
>>> 40000000-fdffefff : System RAM
>>>   40008000-40ffffff : Kernel code
>>>   41e00000-41ef1d77 : Kernel data
>>> 100000000-13fffffff : System RAM
>>>
>>> and with the patch applied, we have this:
>>>
>>> 40000000-fdffefff : System RAM
>>>   40008000-40ffffff : Kernel code
>>>   41e00000-41ef3db7 : Kernel data
>>> fdfff000-ffffffff : System RAM
>>> 100000000-13fffffff : System RAM
>>>
>>> so we can now see that the region 0xfe000000 - 0xfffffff is also cobbled
>>> up with the preceding region which is a mailbox between Linux and the
>>> secure monitor at 0xfdfff000 and of size 4KB. It seems like there is
>>>
>>> The memblock=debug outputs is also different:
>>>
>>> [    0.000000] MEMBLOCK configuration:
>>> [    0.000000]  memory size = 0xfdfff000 reserved size = 0x7ce4d20d
>>> [    0.000000]  memory.cnt  = 0x2
>>> [    0.000000]  memory[0x0]     [0x00000040000000-0x000000fdffefff],
>>> 0xbdfff000 bytes flags: 0x0
>>> [    0.000000]  memory[0x1]     [0x00000100000000-0x0000013fffffff],
>>> 0x40000000 bytes flags: 0x0
>>> [    0.000000]  reserved.cnt  = 0x6
>>> [    0.000000]  reserved[0x0]   [0x00000040003000-0x0000004000e494],
>>> 0xb495 bytes flags: 0x0
>>> [    0.000000]  reserved[0x1]   [0x00000040200000-0x00000041ef1d77],
>>> 0x1cf1d78 bytes flags: 0x0
>>> [    0.000000]  reserved[0x2]   [0x00000045000000-0x000000450fffff],
>>> 0x100000 bytes flags: 0x0
>>> [    0.000000]  reserved[0x3]   [0x00000047000000-0x0000004704ffff],
>>> 0x50000 bytes flags: 0x0
>>> [    0.000000]  reserved[0x4]   [0x000000c2c00000-0x000000fdbfffff],
>>> 0x3b000000 bytes flags: 0x0
>>> [    0.000000]  reserved[0x5]   [0x00000100000000-0x0000013fffffff],
>>> 0x40000000 bytes flags: 0x0
>>>
>>> [    0.000000] MEMBLOCK configuration:
>>> [    0.000000]  memory size = 0x100000000 reserved size = 0x7ca4f24d
>>> [    0.000000]  memory.cnt  = 0x3
>>> [    0.000000]  memory[0x0]     [0x00000040000000-0x000000fdffefff],
>>> 0xbdfff000 bytes flags: 0x0
>>> [    0.000000]  memory[0x1]     [0x000000fdfff000-0x000000ffffffff],
>>> 0x2001000 bytes flags: 0x4
>>> [    0.000000]  memory[0x2]     [0x00000100000000-0x0000013fffffff],
>>> 0x40000000 bytes flags: 0x0
>>> [    0.000000]  reserved.cnt  = 0x6
>>> [    0.000000]  reserved[0x0]   [0x00000040003000-0x0000004000e494],
>>> 0xb495 bytes flags: 0x0
>>> [    0.000000]  reserved[0x1]   [0x00000040200000-0x00000041ef3db7],
>>> 0x1cf3db8 bytes flags: 0x0
>>> [    0.000000]  reserved[0x2]   [0x00000045000000-0x000000450fffff],
>>> 0x100000 bytes flags: 0x0
>>> [    0.000000]  reserved[0x3]   [0x00000047000000-0x0000004704ffff],
>>> 0x50000 bytes flags: 0x0
>>> [    0.000000]  reserved[0x4]   [0x000000c3000000-0x000000fdbfffff],
>>> 0x3ac00000 bytes flags: 0x0
>>> [    0.000000]  reserved[0x5]   [0x00000100000000-0x0000013fffffff],
>>> 0x40000000 bytes flags: 0x0
>>>
>>> in the second case we can clearly see that the 32MB no-map region is now
>>> considered as usable RAM.
>>>
>>> Hope this helps.
>>>
>>>>
>>>> In any case, the mere fact that this causes a regression should be
>>>> sufficient justification to revert/withdraw it from v5.4, as I don't
>>>> see a reason why it was merged there in the first place. (It has no
>>>> fixes tag or cc:stable)
>>>
>>> Agreed, however that means we still need to find out whether a more
>>> recent kernel is also broken, I should be able to tell you that a little
>>> later.
>>
>> FWIW I did test this on Qemu before posting. With 5.12-rc8 and a 1MiB
>> no-map region at 0x80000000, I have the following:
>>
>> 40000000-7fffffff : System RAM
>>   40210000-417fffff : Kernel code
>>   41800000-41daffff : reserved
>>   41db0000-4210ffff : Kernel data
>>   48000000-48008fff : reserved
>> 80000000-800fffff : reserved
>> 80100000-13fffffff : System RAM
>>   fa000000-ffffffff : reserved
>>   13b000000-13f5fffff : reserved
>>   13f6de000-13f77dfff : reserved
>>   13f77e000-13f77efff : reserved
>>   13f77f000-13f7dafff : reserved
>>   13f7dd000-13f7defff : reserved
>>   13f7df000-13f7dffff : reserved
>>   13f7e0000-13f7f3fff : reserved
>>   13f7f4000-13f7fdfff : reserved
>>   13f7fe000-13fffffff : reserved
>>
>> If I remove the 'no-map' qualifier from DT, I get this:
>>
>> 40000000-13fffffff : System RAM
>>   40210000-417fffff : Kernel code
>>   41800000-41daffff : reserved
>>   41db0000-4210ffff : Kernel data
>>   48000000-48008fff : reserved
>>   80000000-800fffff : reserved
>>   fa000000-ffffffff : reserved
>>   13b000000-13f5fffff : reserved
>>   13f6de000-13f77dfff : reserved
>>   13f77e000-13f77efff : reserved
>>   13f77f000-13f7dafff : reserved
>>   13f7dd000-13f7defff : reserved
>>   13f7df000-13f7dffff : reserved
>>   13f7e0000-13f7f3fff : reserved
>>   13f7f4000-13f7fdfff : reserved
>>   13f7fe000-13fffffff : reserved
>>
>> So this does seem to be working fine on my setup. I'll try again with
>> 5.4 to see if I can repro.
>>
>> Also, 8a5a75e5e9e5 ("of/fdt: Make sure no-map does not remove already
>> reserved regions") looks more likely to cause the issue observed here,
>> but that shouldn't be silent. I get the following error message in dmesg
>> if I if place the no-map region on top of the kernel image:
>>
>> OF: fdt: Reserved memory: failed to reserve memory for node 'foobar@40210000': base 0x0000000040210000, size 1 MiB
>>
>> Is that triggering on your end?
> 
> It is not, otherwise I would have noticed earlier, can you try the same
> thing that happens on my platform with a reserved region (without
> no-map) adjacent to a reserved region with 'no-map'? I will test
> different and newer kernels than 5.4 today to find out if this is still
> a problem with upstream. I could confirm that v4.9.259 also have this
> problem now.

5.10.31 works correctly and shows the following for my platform:

40000000-fdffefff : System RAM
  40200000-40eaffff : Kernel code
  40eb0000-4237ffff : reserved
  42380000-425affff : Kernel data
  45000000-450fffff : reserved
  47000000-4704ffff : reserved
  4761e000-47624fff : reserved
  f8c00000-fdbfffff : reserved
fdfff000-ffffffff : reserved
100000000-13fffffff : System RAM
  13b000000-13effffff : reserved
  13f114000-13f173fff : reserved
  13f174000-13f774fff : reserved
  13f775000-13f7e8fff : reserved
  13f7eb000-13f7ecfff : reserved
  13f7ed000-13f7effff : reserved
  13f7f0000-13fffffff : reserved
-- 
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Quentin Perret]

On Wednesday 21 Apr 2021 at 08:17:28 (-0700), Florian Fainelli wrote:
> 5.10.31 works correctly and shows the following for my platform:
> 
> 40000000-fdffefff : System RAM
>   40200000-40eaffff : Kernel code
>   40eb0000-4237ffff : reserved
>   42380000-425affff : Kernel data
>   45000000-450fffff : reserved
>   47000000-4704ffff : reserved
>   4761e000-47624fff : reserved
>   f8c00000-fdbfffff : reserved
> fdfff000-ffffffff : reserved
> 100000000-13fffffff : System RAM
>   13b000000-13effffff : reserved
>   13f114000-13f173fff : reserved
>   13f174000-13f774fff : reserved
>   13f775000-13f7e8fff : reserved
>   13f7eb000-13f7ecfff : reserved
>   13f7ed000-13f7effff : reserved
>   13f7f0000-13fffffff : reserved

OK, so if we're confident this works from 5.10 onwards, I would suggest
to follow Ard's original suggestion to revert this patch from older
LTSes as we're clearly missing something there.

Thanks,
Quentin

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Quentin Perret]

On Wednesday 21 Apr 2021 at 08:17:28 (-0700), Florian Fainelli wrote:
> 5.10.31 works correctly and shows the following for my platform:
> 
> 40000000-fdffefff : System RAM
>   40200000-40eaffff : Kernel code
>   40eb0000-4237ffff : reserved
>   42380000-425affff : Kernel data
>   45000000-450fffff : reserved
>   47000000-4704ffff : reserved
>   4761e000-47624fff : reserved
>   f8c00000-fdbfffff : reserved
> fdfff000-ffffffff : reserved
> 100000000-13fffffff : System RAM
>   13b000000-13effffff : reserved
>   13f114000-13f173fff : reserved
>   13f174000-13f774fff : reserved
>   13f775000-13f7e8fff : reserved
>   13f7eb000-13f7ecfff : reserved
>   13f7ed000-13f7effff : reserved
>   13f7f0000-13fffffff : reserved

OK, so if we're confident this works from 5.10 onwards, I would suggest
to follow Ard's original suggestion to revert this patch from older
LTSes as we're clearly missing something there.

Thanks,
Quentin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Quentin Perret]

On Wednesday 21 Apr 2021 at 07:33:52 (-0700), Florian Fainelli wrote:
> It is not, otherwise I would have noticed earlier, can you try the same
> thing that happens on my platform with a reserved region (without
> no-map) adjacent to a reserved region with 'no-map'?

I just tried, but still no luck. FTR, I tried to reproduce your setup
with the following DT:

        memory@40000000 {
                reg = <0x00 0x40000000 0x01 0x00>;
                device_type = "memory";
        };

        reserved-memory {
                #address-cells = <2>;
                #size-cells = <2>;
                ranges;

                foo@fdfff000{
                        reg = <0x00 0xfdfff000 0x0 0x1000>;
                };
                bar@fe000000{
                        reg = <0x00 0xfe000000 0x0 0x2000000>;
                        no-map;
                };
        };

And with 5.4.102 and 5.10.31 I get the following in /proc/iomem

<...>
40000000-fdffffff : System RAM
  40080000-412cffff : Kernel code
  412d0000-417affff : reserved
  417b0000-419f8fff : Kernel data
  48000000-48008fff : reserved
  f7c00000-fdbfffff : reserved
  fdfff000-fdffffff : reserved
fe000000-ffffffff : reserved
100000000-13fffffff : System RAM
<...>

which looks about right. I'll keep trying a few other things.

Thanks,
Quentin

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Quentin Perret]

On Wednesday 21 Apr 2021 at 07:33:52 (-0700), Florian Fainelli wrote:
> It is not, otherwise I would have noticed earlier, can you try the same
> thing that happens on my platform with a reserved region (without
> no-map) adjacent to a reserved region with 'no-map'?

I just tried, but still no luck. FTR, I tried to reproduce your setup
with the following DT:

        memory@40000000 {
                reg = <0x00 0x40000000 0x01 0x00>;
                device_type = "memory";
        };

        reserved-memory {
                #address-cells = <2>;
                #size-cells = <2>;
                ranges;

                foo@fdfff000{
                        reg = <0x00 0xfdfff000 0x0 0x1000>;
                };
                bar@fe000000{
                        reg = <0x00 0xfe000000 0x0 0x2000000>;
                        no-map;
                };
        };

And with 5.4.102 and 5.10.31 I get the following in /proc/iomem

<...>
40000000-fdffffff : System RAM
  40080000-412cffff : Kernel code
  412d0000-417affff : reserved
  417b0000-419f8fff : Kernel data
  48000000-48008fff : reserved
  f7c00000-fdbfffff : reserved
  fdfff000-fdffffff : reserved
fe000000-ffffffff : reserved
100000000-13fffffff : System RAM
<...>

which looks about right. I'll keep trying a few other things.

Thanks,
Quentin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Alexandre TORGUE]

Hi Quentin

On 4/22/21 2:59 PM, Quentin Perret wrote:
> On Wednesday 21 Apr 2021 at 07:33:52 (-0700), Florian Fainelli wrote:
>> It is not, otherwise I would have noticed earlier, can you try the same
>> thing that happens on my platform with a reserved region (without
>> no-map) adjacent to a reserved region with 'no-map'?
> 
> I just tried, but still no luck. FTR, I tried to reproduce your setup
> with the following DT:
> 
>          memory@40000000 {
>                  reg = <0x00 0x40000000 0x01 0x00>;
>                  device_type = "memory";
>          };
> 
>          reserved-memory {
>                  #address-cells = <2>;
>                  #size-cells = <2>;
>                  ranges;
> 
>                  foo@fdfff000{
>                          reg = <0x00 0xfdfff000 0x0 0x1000>;
>                  };
>                  bar@fe000000{
>                          reg = <0x00 0xfe000000 0x0 0x2000000>;
>                          no-map;
>                  };
>          };
> 
> And with 5.4.102 and 5.10.31 I get the following in /proc/iomem
> 
> <...>
> 40000000-fdffffff : System RAM
>    40080000-412cffff : Kernel code
>    412d0000-417affff : reserved
>    417b0000-419f8fff : Kernel data
>    48000000-48008fff : reserved
>    f7c00000-fdbfffff : reserved
>    fdfff000-fdffffff : reserved
> fe000000-ffffffff : reserved
> 100000000-13fffffff : System RAM
> <...>
> 
> which looks about right. I'll keep trying a few other things.

Did you get time to continue some tests on this issue ?

On my side this DT is not working:

memory@c0000000 {
         reg = <0xc0000000 0x20000000>;
};

reserved-memory {
         #address-cells = <1>;
         #size-cells = <1>;
         ranges;

         gpu_reserved: gpu@d4000000 {
                 reg = <0xd4000000 0x4000000>;
                 no-map;
         };
};

Let me know if I can help.

regards
Alex

> Thanks,
> Quentin
> 

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Alexandre TORGUE]

Hi Quentin

On 4/22/21 2:59 PM, Quentin Perret wrote:
> On Wednesday 21 Apr 2021 at 07:33:52 (-0700), Florian Fainelli wrote:
>> It is not, otherwise I would have noticed earlier, can you try the same
>> thing that happens on my platform with a reserved region (without
>> no-map) adjacent to a reserved region with 'no-map'?
> 
> I just tried, but still no luck. FTR, I tried to reproduce your setup
> with the following DT:
> 
>          memory@40000000 {
>                  reg = <0x00 0x40000000 0x01 0x00>;
>                  device_type = "memory";
>          };
> 
>          reserved-memory {
>                  #address-cells = <2>;
>                  #size-cells = <2>;
>                  ranges;
> 
>                  foo@fdfff000{
>                          reg = <0x00 0xfdfff000 0x0 0x1000>;
>                  };
>                  bar@fe000000{
>                          reg = <0x00 0xfe000000 0x0 0x2000000>;
>                          no-map;
>                  };
>          };
> 
> And with 5.4.102 and 5.10.31 I get the following in /proc/iomem
> 
> <...>
> 40000000-fdffffff : System RAM
>    40080000-412cffff : Kernel code
>    412d0000-417affff : reserved
>    417b0000-419f8fff : Kernel data
>    48000000-48008fff : reserved
>    f7c00000-fdbfffff : reserved
>    fdfff000-fdffffff : reserved
> fe000000-ffffffff : reserved
> 100000000-13fffffff : System RAM
> <...>
> 
> which looks about right. I'll keep trying a few other things.

Did you get time to continue some tests on this issue ?

On my side this DT is not working:

memory@c0000000 {
         reg = <0xc0000000 0x20000000>;
};

reserved-memory {
         #address-cells = <1>;
         #size-cells = <1>;
         ranges;

         gpu_reserved: gpu@d4000000 {
                 reg = <0xd4000000 0x4000000>;
                 no-map;
         };
};

Let me know if I can help.

regards
Alex

> Thanks,
> Quentin
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Quentin Perret]

Hi Alexandre,

On Friday 07 May 2021 at 17:15:20 (+0200), Alexandre TORGUE wrote:
> Did you get time to continue some tests on this issue ?

I did try a few things, but still fail to reproduced :/

> On my side this DT is not working:
> 
> memory@c0000000 {
>         reg = <0xc0000000 0x20000000>;
> };
> 
> reserved-memory {
>         #address-cells = <1>;
>         #size-cells = <1>;
>         ranges;
> 
>         gpu_reserved: gpu@d4000000 {
>                 reg = <0xd4000000 0x4000000>;
>                 no-map;
>         };
> };

So this does change how memory appears in /proc/iomem for me switching
from 5.4.101 to v5.4.102 -- for the former d4000000-d7ffffff doesn't
appear at all, and for the latter it appears as 'reserved'.

But still, it never gets accounted as System RAM for me ...

> Let me know if I can help.

Could you please confirm you get a correct behaviour with 5.10.31 like
Florian? If so, then bisecting to figure out what we're missing in older
LTSes would help, but again it feels like we should just revert -- this
wasn't really a fix in the first place.

Thanks,
Quentin

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Quentin Perret]

Hi Alexandre,

On Friday 07 May 2021 at 17:15:20 (+0200), Alexandre TORGUE wrote:
> Did you get time to continue some tests on this issue ?

I did try a few things, but still fail to reproduced :/

> On my side this DT is not working:
> 
> memory@c0000000 {
>         reg = <0xc0000000 0x20000000>;
> };
> 
> reserved-memory {
>         #address-cells = <1>;
>         #size-cells = <1>;
>         ranges;
> 
>         gpu_reserved: gpu@d4000000 {
>                 reg = <0xd4000000 0x4000000>;
>                 no-map;
>         };
> };

So this does change how memory appears in /proc/iomem for me switching
from 5.4.101 to v5.4.102 -- for the former d4000000-d7ffffff doesn't
appear at all, and for the latter it appears as 'reserved'.

But still, it never gets accounted as System RAM for me ...

> Let me know if I can help.

Could you please confirm you get a correct behaviour with 5.10.31 like
Florian? If so, then bisecting to figure out what we're missing in older
LTSes would help, but again it feels like we should just revert -- this
wasn't really a fix in the first place.

Thanks,
Quentin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Alexandre TORGUE]

Hi Quentin,

On 5/10/21 12:09 PM, Quentin Perret wrote:
> Hi Alexandre,
> 
> On Friday 07 May 2021 at 17:15:20 (+0200), Alexandre TORGUE wrote:
>> Did you get time to continue some tests on this issue ?
> 
> I did try a few things, but still fail to reproduced :/
> 
>> On my side this DT is not working:
>>
>> memory@c0000000 {
>>          reg = <0xc0000000 0x20000000>;
>> };
>>
>> reserved-memory {
>>          #address-cells = <1>;
>>          #size-cells = <1>;
>>          ranges;
>>
>>          gpu_reserved: gpu@d4000000 {
>>                  reg = <0xd4000000 0x4000000>;
>>                  no-map;
>>          };
>> };
> 
> So this does change how memory appears in /proc/iomem for me switching
> from 5.4.101 to v5.4.102 -- for the former d4000000-d7ffffff doesn't
> appear at all, and for the latter it appears as 'reserved'.
> 
> But still, it never gets accounted as System RAM for me ...
> 
>> Let me know if I can help.
> 
> Could you please confirm you get a correct behaviour with 5.10.31 like
> Florian? If so, then bisecting to figure out what we're missing in older
> LTSes would help, but again it feels like we should just revert -- this
> wasn't really a fix in the first place.


We saw that patches [1] and [2] cause issue on stable version (at least 
for 5.4). As you said issue can be seen with above device tree and check 
in /proc/iomem than gpu_reserved region is taken by the kernel as 
"System RAM".

On v5.10 stream there are no issues seen taking patches [1]&[2] and the 
reason is linked to patches [3]&[4] which have been introduced in 
v5.10.0. Reverting them give me the same behavior than on stable version.


[1] of/fdt: Make sure no-map does not remove already reserved regions
[2] fdt: Properly handle "no-map" field in the memory region
[3] arch, drivers: replace for_each_membock() with for_each_mem_range()
[4] memblock: use separate iterators for memory and reserved regions

regards
Alex

> 
> Thanks,
> Quentin
> 

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Alexandre TORGUE]

Hi Quentin,

On 5/10/21 12:09 PM, Quentin Perret wrote:
> Hi Alexandre,
> 
> On Friday 07 May 2021 at 17:15:20 (+0200), Alexandre TORGUE wrote:
>> Did you get time to continue some tests on this issue ?
> 
> I did try a few things, but still fail to reproduced :/
> 
>> On my side this DT is not working:
>>
>> memory@c0000000 {
>>          reg = <0xc0000000 0x20000000>;
>> };
>>
>> reserved-memory {
>>          #address-cells = <1>;
>>          #size-cells = <1>;
>>          ranges;
>>
>>          gpu_reserved: gpu@d4000000 {
>>                  reg = <0xd4000000 0x4000000>;
>>                  no-map;
>>          };
>> };
> 
> So this does change how memory appears in /proc/iomem for me switching
> from 5.4.101 to v5.4.102 -- for the former d4000000-d7ffffff doesn't
> appear at all, and for the latter it appears as 'reserved'.
> 
> But still, it never gets accounted as System RAM for me ...
> 
>> Let me know if I can help.
> 
> Could you please confirm you get a correct behaviour with 5.10.31 like
> Florian? If so, then bisecting to figure out what we're missing in older
> LTSes would help, but again it feels like we should just revert -- this
> wasn't really a fix in the first place.


We saw that patches [1] and [2] cause issue on stable version (at least 
for 5.4). As you said issue can be seen with above device tree and check 
in /proc/iomem than gpu_reserved region is taken by the kernel as 
"System RAM".

On v5.10 stream there are no issues seen taking patches [1]&[2] and the 
reason is linked to patches [3]&[4] which have been introduced in 
v5.10.0. Reverting them give me the same behavior than on stable version.


[1] of/fdt: Make sure no-map does not remove already reserved regions
[2] fdt: Properly handle "no-map" field in the memory region
[3] arch, drivers: replace for_each_membock() with for_each_mem_range()
[4] memblock: use separate iterators for memory and reserved regions

regards
Alex

> 
> Thanks,
> Quentin
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Quentin Perret]

On Wednesday 12 May 2021 at 12:55:53 (+0200), Alexandre TORGUE wrote:
> We saw that patches [1] and [2] cause issue on stable version (at least for
> 5.4). As you said issue can be seen with above device tree and check in
> /proc/iomem than gpu_reserved region is taken by the kernel as "System RAM".
> 
> On v5.10 stream there are no issues seen taking patches [1]&[2] and the
> reason is linked to patches [3]&[4] which have been introduced in v5.10.0.
> Reverting them give me the same behavior than on stable version.

Thanks for confirming. Given that the patches were not really fixes, I
think reverting is still the best option. I've sent reverts to -stable
for 5.4 and prior:

https://lore.kernel.org/stable/20210512122853.3243417-1-qperret@google.com/

Cheers,
Quentin

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Quentin Perret]

On Wednesday 12 May 2021 at 12:55:53 (+0200), Alexandre TORGUE wrote:
> We saw that patches [1] and [2] cause issue on stable version (at least for
> 5.4). As you said issue can be seen with above device tree and check in
> /proc/iomem than gpu_reserved region is taken by the kernel as "System RAM".
> 
> On v5.10 stream there are no issues seen taking patches [1]&[2] and the
> reason is linked to patches [3]&[4] which have been introduced in v5.10.0.
> Reverting them give me the same behavior than on stable version.

Thanks for confirming. Given that the patches were not really fixes, I
think reverting is still the best option. I've sent reverts to -stable
for 5.4 and prior:

https://lore.kernel.org/stable/20210512122853.3243417-1-qperret@google.com/

Cheers,
Quentin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Alexandre TORGUE]

On 5/12/21 2:34 PM, Quentin Perret wrote:
> On Wednesday 12 May 2021 at 12:55:53 (+0200), Alexandre TORGUE wrote:
>> We saw that patches [1] and [2] cause issue on stable version (at least for
>> 5.4). As you said issue can be seen with above device tree and check in
>> /proc/iomem than gpu_reserved region is taken by the kernel as "System RAM".
>>
>> On v5.10 stream there are no issues seen taking patches [1]&[2] and the
>> reason is linked to patches [3]&[4] which have been introduced in v5.10.0.
>> Reverting them give me the same behavior than on stable version.
> 
> Thanks for confirming. Given that the patches were not really fixes, I
> think reverting is still the best option. I've sent reverts to -stable
> for 5.4 and prior:
> 
> https://lore.kernel.org/stable/20210512122853.3243417-1-qperret@google.com/
> 

Thanks Quentin.

alex

> Cheers,
> Quentin
> 

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Alexandre TORGUE]

On 5/12/21 2:34 PM, Quentin Perret wrote:
> On Wednesday 12 May 2021 at 12:55:53 (+0200), Alexandre TORGUE wrote:
>> We saw that patches [1] and [2] cause issue on stable version (at least for
>> 5.4). As you said issue can be seen with above device tree and check in
>> /proc/iomem than gpu_reserved region is taken by the kernel as "System RAM".
>>
>> On v5.10 stream there are no issues seen taking patches [1]&[2] and the
>> reason is linked to patches [3]&[4] which have been introduced in v5.10.0.
>> Reverting them give me the same behavior than on stable version.
> 
> Thanks for confirming. Given that the patches were not really fixes, I
> think reverting is still the best option. I've sent reverts to -stable
> for 5.4 and prior:
> 
> https://lore.kernel.org/stable/20210512122853.3243417-1-qperret@google.com/
> 

Thanks Quentin.

alex

> Cheers,
> Quentin
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Rob Herring]

On Tue, Apr 20, 2021 at 11:10 AM Ard Biesheuvel <ardb@kernel.org> wrote:
>
> On Tue, 20 Apr 2021 at 17:54, Rob Herring <robh+dt@kernel.org> wrote:
> >
> > On Tue, Apr 20, 2021 at 10:12 AM Alexandre TORGUE
> > <alexandre.torgue@foss.st.com> wrote:
> > >
> > >
> > >
> > > On 4/20/21 4:45 PM, Rob Herring wrote:
> > > > On Tue, Apr 20, 2021 at 9:03 AM Alexandre TORGUE
> > > > <alexandre.torgue@foss.st.com> wrote:
> > > >>
> > > >> Hi,
> > > >
> > > > Greg or Sasha won't know what to do with this. Not sure who follows
> > > > the stable list either. Quentin sent the patch, but is not the author.
> > > > Given the patch in question is about consistency between EFI memory
> > > > map boot and DT memory map boot, copying EFI knowledgeable folks would
> > > > help (Ard B for starters).
> > >
> > > Ok thanks for the tips. I add Ard in the loop.
> >
> > Sigh. If it was only Ard I was suggesting I would have done that
> > myself. Now everyone on the patch in question and relevant lists are
> > Cc'ed.
> >
>
> Thanks for the cc.
>
> > >
> > > Ard, let me know if other people have to be directly added or if I have
> > > to resend to another mailing list.
> > >
> > > thanks
> > > alex
> > >
> > > >
> > > >>
> > > >> Since v5.4.102 I observe a regression on stm32mp1 platform: "no-map"
> > > >> reserved-memory regions are no more "reserved" and make part of the
> > > >> kernel System RAM. This causes allocation failure for devices which try
> > > >> to take a reserved-memory region.
> > > >>
> > > >> It has been introduced by the following path:
> > > >>
> > > >> "fdt: Properly handle "no-map" field in the memory region
> > > >> [ Upstream commit 86588296acbfb1591e92ba60221e95677ecadb43 ]"
> > > >> which replace memblock_remove by memblock_mark_nomap in no-map case.
> > > >>
>
> Why was this backported? It doesn't look like a bugfix to me.

Probably because of commit 8a5a75e5e9e5 ("of/fdt: Make sure no-map
does not remove already reserved regions") which was in the same
series.

'Properly handle' implies before it was 'improperly handled', so
sounds like a fix.

Rob

Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region

[Rob Herring]

On Tue, Apr 20, 2021 at 11:10 AM Ard Biesheuvel <ardb@kernel.org> wrote:
>
> On Tue, 20 Apr 2021 at 17:54, Rob Herring <robh+dt@kernel.org> wrote:
> >
> > On Tue, Apr 20, 2021 at 10:12 AM Alexandre TORGUE
> > <alexandre.torgue@foss.st.com> wrote:
> > >
> > >
> > >
> > > On 4/20/21 4:45 PM, Rob Herring wrote:
> > > > On Tue, Apr 20, 2021 at 9:03 AM Alexandre TORGUE
> > > > <alexandre.torgue@foss.st.com> wrote:
> > > >>
> > > >> Hi,
> > > >
> > > > Greg or Sasha won't know what to do with this. Not sure who follows
> > > > the stable list either. Quentin sent the patch, but is not the author.
> > > > Given the patch in question is about consistency between EFI memory
> > > > map boot and DT memory map boot, copying EFI knowledgeable folks would
> > > > help (Ard B for starters).
> > >
> > > Ok thanks for the tips. I add Ard in the loop.
> >
> > Sigh. If it was only Ard I was suggesting I would have done that
> > myself. Now everyone on the patch in question and relevant lists are
> > Cc'ed.
> >
>
> Thanks for the cc.
>
> > >
> > > Ard, let me know if other people have to be directly added or if I have
> > > to resend to another mailing list.
> > >
> > > thanks
> > > alex
> > >
> > > >
> > > >>
> > > >> Since v5.4.102 I observe a regression on stm32mp1 platform: "no-map"
> > > >> reserved-memory regions are no more "reserved" and make part of the
> > > >> kernel System RAM. This causes allocation failure for devices which try
> > > >> to take a reserved-memory region.
> > > >>
> > > >> It has been introduced by the following path:
> > > >>
> > > >> "fdt: Properly handle "no-map" field in the memory region
> > > >> [ Upstream commit 86588296acbfb1591e92ba60221e95677ecadb43 ]"
> > > >> which replace memblock_remove by memblock_mark_nomap in no-map case.
> > > >>
>
> Why was this backported? It doesn't look like a bugfix to me.

Probably because of commit 8a5a75e5e9e5 ("of/fdt: Make sure no-map
does not remove already reserved regions") which was in the same
series.

'Properly handle' implies before it was 'improperly handled', so
sounds like a fix.

Rob

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel