From: Vivek Gautam <vivek.gautam@codeaurora.org> To: Manu Gautam <mgautam@codeaurora.org>, andy.gross@linaro.org Cc: linux-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, dianders@chromium.org, linux-usb@vger.kernel.org, felipe.balbi@linux.intel.com, gregkh@linuxfoundation.org, bjorn.andersson@linaro.org Subject: Re: [PATCH v2] arm64: dts: msm8996: Use dwc3-qcom glue driver for USB Date: Thu, 7 Jun 2018 14:00:21 +0530 [thread overview] Message-ID: <d98cd884-f25d-ee2e-58cf-400993e0d213@codeaurora.org> (raw) In-Reply-To: <20180531104710.23965-1-mgautam@codeaurora.org> On 5/31/2018 4:17 PM, Manu Gautam wrote: > Move from dwc3-of-simple to dwc3-qcom glue driver to > support peripheral mode which requires qscratch wrapper > programming on VBUS event. > > Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver") > Signed-off-by: Manu Gautam <mgautam@codeaurora.org> > --- > > Changes since v1: > - Update unit address of DT node as per Doug's comment > > arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 6 ++++-- > arch/arm64/boot/dts/qcom/msm8996.dtsi | 10 ++++++---- > 2 files changed, 10 insertions(+), 6 deletions(-) Tested on DB820c. Works fine. Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> BRs Vivek > > diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi > index f45a0ab30d30..00be0d53891a 100644 > --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi > +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi > @@ -106,8 +106,9 @@ > status = "okay"; > }; > > - usb@6a00000 { > + usb@6af8800 { > status = "okay"; > + extcon = <&usb3_id>; > > dwc3@6a00000 { > extcon = <&usb3_id>; > @@ -122,8 +123,9 @@ > pinctrl-0 = <&usb3_vbus_det_gpio>; > }; > > - usb@7600000 { > + usb@76f8800 { > status = "okay"; > + extcon = <&usb2_id>; > > dwc3@7600000 { > extcon = <&usb2_id>; > diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi > index 26292027ba9b..8b6dd5443524 100644 > --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi > @@ -776,8 +776,9 @@ > status = "disabled"; > }; > > - usb2: usb@7600000 { > - compatible = "qcom,dwc3"; > + usb2: usb@76f8800 { > + compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; > + reg = <0x76f8800 0x400>; > #address-cells = <1>; > #size-cells = <1>; > ranges; > @@ -804,8 +805,9 @@ > }; > }; > > - usb3: usb@6a00000 { > - compatible = "qcom,dwc3"; > + usb3: usb@6af8800 { > + compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; > + reg = <0x6af8800 0x400>; > #address-cells = <1>; > #size-cells = <1>; > ranges;
WARNING: multiple messages have this Message-ID (diff)
From: Vivek Gautam <vivek.gautam@codeaurora.org> To: Manu Gautam <mgautam@codeaurora.org>, andy.gross@linaro.org Cc: linux-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, dianders@chromium.org, linux-usb@vger.kernel.org, felipe.balbi@linux.intel.com, gregkh@linuxfoundation.org, bjorn.andersson@linaro.org Subject: [v2] arm64: dts: msm8996: Use dwc3-qcom glue driver for USB Date: Thu, 7 Jun 2018 14:00:21 +0530 [thread overview] Message-ID: <d98cd884-f25d-ee2e-58cf-400993e0d213@codeaurora.org> (raw) On 5/31/2018 4:17 PM, Manu Gautam wrote: > Move from dwc3-of-simple to dwc3-qcom glue driver to > support peripheral mode which requires qscratch wrapper > programming on VBUS event. > > Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver") > Signed-off-by: Manu Gautam <mgautam@codeaurora.org> > --- > > Changes since v1: > - Update unit address of DT node as per Doug's comment > > arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 6 ++++-- > arch/arm64/boot/dts/qcom/msm8996.dtsi | 10 ++++++---- > 2 files changed, 10 insertions(+), 6 deletions(-) Tested on DB820c. Works fine. Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> BRs Vivek > > diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi > index f45a0ab30d30..00be0d53891a 100644 > --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi > +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi > @@ -106,8 +106,9 @@ > status = "okay"; > }; > > - usb@6a00000 { > + usb@6af8800 { > status = "okay"; > + extcon = <&usb3_id>; > > dwc3@6a00000 { > extcon = <&usb3_id>; > @@ -122,8 +123,9 @@ > pinctrl-0 = <&usb3_vbus_det_gpio>; > }; > > - usb@7600000 { > + usb@76f8800 { > status = "okay"; > + extcon = <&usb2_id>; > > dwc3@7600000 { > extcon = <&usb2_id>; > diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi > index 26292027ba9b..8b6dd5443524 100644 > --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi > @@ -776,8 +776,9 @@ > status = "disabled"; > }; > > - usb2: usb@7600000 { > - compatible = "qcom,dwc3"; > + usb2: usb@76f8800 { > + compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; > + reg = <0x76f8800 0x400>; > #address-cells = <1>; > #size-cells = <1>; > ranges; > @@ -804,8 +805,9 @@ > }; > }; > > - usb3: usb@6a00000 { > - compatible = "qcom,dwc3"; > + usb3: usb@6af8800 { > + compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; > + reg = <0x6af8800 0x400>; > #address-cells = <1>; > #size-cells = <1>; > ranges; --- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2018-06-07 8:30 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-05-31 10:47 [PATCH v2] arm64: dts: msm8996: Use dwc3-qcom glue driver for USB Manu Gautam 2018-05-31 10:47 ` [v2] " Manu Gautam 2018-06-07 8:30 ` Vivek Gautam [this message] 2018-06-07 8:30 ` Vivek Gautam 2018-06-11 6:36 ` [PATCH v2] " Julien Massot 2018-06-11 6:36 ` [v2] " Julien Massot 2018-06-11 7:01 ` [PATCH v2] " Vivek Gautam 2018-06-11 7:01 ` [v2] " Vivek Gautam 2018-06-11 12:33 ` [PATCH v2] " Julien Massot 2018-06-11 12:33 ` [v2] " Julien Massot [not found] ` <CADb+VZKtAspuvO64FVEBHUbcB0Nr57jWpBmpS5GfCE+QKD4CcA@mail.gmail.com> 2018-06-27 9:27 ` [PATCH v2] " Felipe Balbi 2018-06-27 9:27 ` [v2] " Felipe Balbi [not found] ` <CADb+VZJVtfgSDD+7F1J6p2YG0dguN7BhP=bzz3r8jO7FT7dk8w@mail.gmail.com> 2018-06-27 12:30 ` [PATCH v2] " Felipe Balbi 2018-06-27 12:30 ` [v2] " Felipe Balbi 2018-07-10 15:03 ` [PATCH v2] " Pierre Le Magourou 2018-07-10 15:03 ` [v2] " lemagoup 2018-06-26 9:37 ` [PATCH v2] " Manu Gautam 2018-06-26 9:37 ` [v2] " Manu Gautam
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=d98cd884-f25d-ee2e-58cf-400993e0d213@codeaurora.org \ --to=vivek.gautam@codeaurora.org \ --cc=andy.gross@linaro.org \ --cc=bjorn.andersson@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=dianders@chromium.org \ --cc=felipe.balbi@linux.intel.com \ --cc=gregkh@linuxfoundation.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-soc@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=mgautam@codeaurora.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.