* [PATCH v2 00/16] add dts nodes to MT7622 SoC
@ 2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang at mediatek.com @ 2018-02-06 9:52 UTC (permalink / raw)
To: linux-arm-kernel
From: Sean Wang <sean.wang@mediatek.com>
Changes since v1:
- add usb, thermal, HSDMA, mmc related nodes
- fix Warning (unit_address_vs_reg): Node /oscillator at 0 has
a unit name, but no reg property in patch 2
- fix Warning (pci_bridge): Node /pcie at 1a140000/pcie at 0,0 missing
bus-range for PCI bridge
- fix Warning (pci_bridge): Node /pcie at 1a140000/pcie at 1,0 missing
bus-range for PCI bridge
- fix Warning (unit_address_format): Failed prerequisite 'pci_bridge'
- fix Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
- fix Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
- enhance commit log in patch 4
- use - instead of _ in DT node name in patch 4 and 6
- use SPDX-License-Identifier for newly added files in patch 5
- use proper #size-cells for spi nor nodes in patch 9
- remove currently no needed #address-cells and #size-cells in
children nodes of spi nor in patch 9.
add dts nodes to MT7622 SoC and related rfb1 board
Chunfeng Yun (1):
arm64: dts: mt7622: add usb device nodes
Ryder Lee (2):
arm64: dts: mt7622: add PCIe device nodes
arm64: dts: mt7622: add SATA device nodes
Sean Wang (13):
dt-bindings: clock: mediatek: add missing required #reset-cells
arm64: dts: mt7622: add clock controller device nodes
arm64: dts: mt7622: add power domain controller device nodes
arm64: dts: mt7622: add pinctrl related device nodes
arm64: dts: mt7622: add PMIC MT6380 related nodes
arm64: dts: mt7622: add cpufreq related device nodes
arm64: dts: mt7622: turn uart0 clock to real ones
arm64: dts: mt7622: add SoC and peripheral related device nodes
arm64: dts: mt7622: add flash related device nodes
arm64: dts: mt7622: add ethernet device nodes
arm64: dts: mt7622: add thermal and related nodes
arm64: dts: mt7622: add High-Speed DMA device nodes
arm64: dts: mt7622: add mmc related device nodes
.../bindings/arm/mediatek/mediatek,ethsys.txt | 2 +
.../bindings/arm/mediatek/mediatek,pciesys.txt | 2 +
.../bindings/arm/mediatek/mediatek,ssusbsys.txt | 2 +
arch/arm64/boot/dts/mediatek/mt6380.dtsi | 86 +++
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 469 ++++++++++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 682 ++++++++++++++++++++-
6 files changed, 1238 insertions(+), 5 deletions(-)
create mode 100644 arch/arm64/boot/dts/mediatek/mt6380.dtsi
--
2.7.4
^ permalink raw reply [flat|nested] 85+ messages in thread
* [PATCH v2 00/16] add dts nodes to MT7622 SoC
@ 2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2018-02-06 9:52 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Sean Wang
From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Changes since v1:
- add usb, thermal, HSDMA, mmc related nodes
- fix Warning (unit_address_vs_reg): Node /oscillator@0 has
a unit name, but no reg property in patch 2
- fix Warning (pci_bridge): Node /pcie@1a140000/pcie@0,0 missing
bus-range for PCI bridge
- fix Warning (pci_bridge): Node /pcie@1a140000/pcie@1,0 missing
bus-range for PCI bridge
- fix Warning (unit_address_format): Failed prerequisite 'pci_bridge'
- fix Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
- fix Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
- enhance commit log in patch 4
- use - instead of _ in DT node name in patch 4 and 6
- use SPDX-License-Identifier for newly added files in patch 5
- use proper #size-cells for spi nor nodes in patch 9
- remove currently no needed #address-cells and #size-cells in
children nodes of spi nor in patch 9.
add dts nodes to MT7622 SoC and related rfb1 board
Chunfeng Yun (1):
arm64: dts: mt7622: add usb device nodes
Ryder Lee (2):
arm64: dts: mt7622: add PCIe device nodes
arm64: dts: mt7622: add SATA device nodes
Sean Wang (13):
dt-bindings: clock: mediatek: add missing required #reset-cells
arm64: dts: mt7622: add clock controller device nodes
arm64: dts: mt7622: add power domain controller device nodes
arm64: dts: mt7622: add pinctrl related device nodes
arm64: dts: mt7622: add PMIC MT6380 related nodes
arm64: dts: mt7622: add cpufreq related device nodes
arm64: dts: mt7622: turn uart0 clock to real ones
arm64: dts: mt7622: add SoC and peripheral related device nodes
arm64: dts: mt7622: add flash related device nodes
arm64: dts: mt7622: add ethernet device nodes
arm64: dts: mt7622: add thermal and related nodes
arm64: dts: mt7622: add High-Speed DMA device nodes
arm64: dts: mt7622: add mmc related device nodes
.../bindings/arm/mediatek/mediatek,ethsys.txt | 2 +
.../bindings/arm/mediatek/mediatek,pciesys.txt | 2 +
.../bindings/arm/mediatek/mediatek,ssusbsys.txt | 2 +
arch/arm64/boot/dts/mediatek/mt6380.dtsi | 86 +++
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 469 ++++++++++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 682 ++++++++++++++++++++-
6 files changed, 1238 insertions(+), 5 deletions(-)
create mode 100644 arch/arm64/boot/dts/mediatek/mt6380.dtsi
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 85+ messages in thread
* [PATCH v2 01/16] dt-bindings: clock: mediatek: add missing required #reset-cells
2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
(?)
@ 2018-02-06 9:52 ` sean.wang
-1 siblings, 0 replies; 85+ messages in thread
From: sean.wang @ 2018-02-06 9:52 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel, Sean Wang, Rob Herring, Stephen Boyd
From: Sean Wang <sean.wang@mediatek.com>
All ethsys, pciesys and ssusbsys internally include reset controller, so
explicitly add back these missing cell definitions to related bindings
and examples.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt | 2 ++
Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt | 2 ++
Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt | 2 ++
3 files changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
index 7aa3fa1..8f5335b 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
@@ -9,6 +9,7 @@ Required Properties:
- "mediatek,mt2701-ethsys", "syscon"
- "mediatek,mt7622-ethsys", "syscon"
- #clock-cells: Must be 1
+- #reset-cells: Must be 1
The ethsys controller uses the common clk binding from
Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -20,4 +21,5 @@ ethsys: clock-controller@1b000000 {
compatible = "mediatek,mt2701-ethsys", "syscon";
reg = <0 0x1b000000 0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt
index d5d5f12..7fe5dc6 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt
@@ -8,6 +8,7 @@ Required Properties:
- compatible: Should be:
- "mediatek,mt7622-pciesys", "syscon"
- #clock-cells: Must be 1
+- #reset-cells: Must be 1
The PCIESYS controller uses the common clk binding from
Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -19,4 +20,5 @@ pciesys: pciesys@1a100800 {
compatible = "mediatek,mt7622-pciesys", "syscon";
reg = <0 0x1a100800 0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt
index 00760019..b8184da 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt
@@ -8,6 +8,7 @@ Required Properties:
- compatible: Should be:
- "mediatek,mt7622-ssusbsys", "syscon"
- #clock-cells: Must be 1
+- #reset-cells: Must be 1
The SSUSBSYS controller uses the common clk binding from
Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -19,4 +20,5 @@ ssusbsys: ssusbsys@1a000000 {
compatible = "mediatek,mt7622-ssusbsys", "syscon";
reg = <0 0x1a000000 0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 01/16] dt-bindings: clock: mediatek: add missing required #reset-cells
@ 2018-02-06 9:52 ` sean.wang
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang at mediatek.com @ 2018-02-06 9:52 UTC (permalink / raw)
To: linux-arm-kernel
From: Sean Wang <sean.wang@mediatek.com>
All ethsys, pciesys and ssusbsys internally include reset controller, so
explicitly add back these missing cell definitions to related bindings
and examples.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt | 2 ++
Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt | 2 ++
Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt | 2 ++
3 files changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
index 7aa3fa1..8f5335b 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
@@ -9,6 +9,7 @@ Required Properties:
- "mediatek,mt2701-ethsys", "syscon"
- "mediatek,mt7622-ethsys", "syscon"
- #clock-cells: Must be 1
+- #reset-cells: Must be 1
The ethsys controller uses the common clk binding from
Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -20,4 +21,5 @@ ethsys: clock-controller at 1b000000 {
compatible = "mediatek,mt2701-ethsys", "syscon";
reg = <0 0x1b000000 0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt
index d5d5f12..7fe5dc6 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt
@@ -8,6 +8,7 @@ Required Properties:
- compatible: Should be:
- "mediatek,mt7622-pciesys", "syscon"
- #clock-cells: Must be 1
+- #reset-cells: Must be 1
The PCIESYS controller uses the common clk binding from
Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -19,4 +20,5 @@ pciesys: pciesys at 1a100800 {
compatible = "mediatek,mt7622-pciesys", "syscon";
reg = <0 0x1a100800 0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt
index 00760019..b8184da 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt
@@ -8,6 +8,7 @@ Required Properties:
- compatible: Should be:
- "mediatek,mt7622-ssusbsys", "syscon"
- #clock-cells: Must be 1
+- #reset-cells: Must be 1
The SSUSBSYS controller uses the common clk binding from
Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -19,4 +20,5 @@ ssusbsys: ssusbsys at 1a000000 {
compatible = "mediatek,mt7622-ssusbsys", "syscon";
reg = <0 0x1a000000 0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 01/16] dt-bindings: clock: mediatek: add missing required #reset-cells
@ 2018-02-06 9:52 ` sean.wang
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang @ 2018-02-06 9:52 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: Rob Herring, Sean Wang, Stephen Boyd, linux-kernel, linux-arm-kernel
From: Sean Wang <sean.wang@mediatek.com>
All ethsys, pciesys and ssusbsys internally include reset controller, so
explicitly add back these missing cell definitions to related bindings
and examples.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt | 2 ++
Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt | 2 ++
Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt | 2 ++
3 files changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
index 7aa3fa1..8f5335b 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
@@ -9,6 +9,7 @@ Required Properties:
- "mediatek,mt2701-ethsys", "syscon"
- "mediatek,mt7622-ethsys", "syscon"
- #clock-cells: Must be 1
+- #reset-cells: Must be 1
The ethsys controller uses the common clk binding from
Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -20,4 +21,5 @@ ethsys: clock-controller@1b000000 {
compatible = "mediatek,mt2701-ethsys", "syscon";
reg = <0 0x1b000000 0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt
index d5d5f12..7fe5dc6 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt
@@ -8,6 +8,7 @@ Required Properties:
- compatible: Should be:
- "mediatek,mt7622-pciesys", "syscon"
- #clock-cells: Must be 1
+- #reset-cells: Must be 1
The PCIESYS controller uses the common clk binding from
Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -19,4 +20,5 @@ pciesys: pciesys@1a100800 {
compatible = "mediatek,mt7622-pciesys", "syscon";
reg = <0 0x1a100800 0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt
index 00760019..b8184da 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt
@@ -8,6 +8,7 @@ Required Properties:
- compatible: Should be:
- "mediatek,mt7622-ssusbsys", "syscon"
- #clock-cells: Must be 1
+- #reset-cells: Must be 1
The SSUSBSYS controller uses the common clk binding from
Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -19,4 +20,5 @@ ssusbsys: ssusbsys@1a000000 {
compatible = "mediatek,mt7622-ssusbsys", "syscon";
reg = <0 0x1a000000 0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* Re: [PATCH v2 01/16] dt-bindings: clock: mediatek: add missing required #reset-cells
@ 2018-02-07 10:45 ` Matthias Brugger
0 siblings, 0 replies; 85+ messages in thread
From: Matthias Brugger @ 2018-02-07 10:45 UTC (permalink / raw)
To: sean.wang, robh+dt, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel, Rob Herring, Stephen Boyd
On 02/06/2018 10:52 AM, sean.wang@mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
>
> All ethsys, pciesys and ssusbsys internally include reset controller, so
> explicitly add back these missing cell definitions to related bindings
> and examples.
>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Stephen Boyd <sboyd@codeaurora.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt | 2 ++
> Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt | 2 ++
> Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt | 2 ++
> 3 files changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
> index 7aa3fa1..8f5335b 100644
> --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
> @@ -9,6 +9,7 @@ Required Properties:
> - "mediatek,mt2701-ethsys", "syscon"
> - "mediatek,mt7622-ethsys", "syscon"
> - #clock-cells: Must be 1
> +- #reset-cells: Must be 1
>
> The ethsys controller uses the common clk binding from
> Documentation/devicetree/bindings/clock/clock-bindings.txt
> @@ -20,4 +21,5 @@ ethsys: clock-controller@1b000000 {
> compatible = "mediatek,mt2701-ethsys", "syscon";
> reg = <0 0x1b000000 0 0x1000>;
> #clock-cells = <1>;
> + #reset-cells = <1>;
The example is already fixed upstream, but I forgot the binding description,
please rebase this patch.
And please don't forget to add all clock maintainers.
Regards,
Matthias
^ permalink raw reply [flat|nested] 85+ messages in thread* [PATCH v2 01/16] dt-bindings: clock: mediatek: add missing required #reset-cells
@ 2018-02-07 10:45 ` Matthias Brugger
0 siblings, 0 replies; 85+ messages in thread
From: Matthias Brugger @ 2018-02-07 10:45 UTC (permalink / raw)
To: linux-arm-kernel
On 02/06/2018 10:52 AM, sean.wang at mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
>
> All ethsys, pciesys and ssusbsys internally include reset controller, so
> explicitly add back these missing cell definitions to related bindings
> and examples.
>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Stephen Boyd <sboyd@codeaurora.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt | 2 ++
> Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt | 2 ++
> Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt | 2 ++
> 3 files changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
> index 7aa3fa1..8f5335b 100644
> --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
> @@ -9,6 +9,7 @@ Required Properties:
> - "mediatek,mt2701-ethsys", "syscon"
> - "mediatek,mt7622-ethsys", "syscon"
> - #clock-cells: Must be 1
> +- #reset-cells: Must be 1
>
> The ethsys controller uses the common clk binding from
> Documentation/devicetree/bindings/clock/clock-bindings.txt
> @@ -20,4 +21,5 @@ ethsys: clock-controller at 1b000000 {
> compatible = "mediatek,mt2701-ethsys", "syscon";
> reg = <0 0x1b000000 0 0x1000>;
> #clock-cells = <1>;
> + #reset-cells = <1>;
The example is already fixed upstream, but I forgot the binding description,
please rebase this patch.
And please don't forget to add all clock maintainers.
Regards,
Matthias
^ permalink raw reply [flat|nested] 85+ messages in thread* Re: [PATCH v2 01/16] dt-bindings: clock: mediatek: add missing required #reset-cells
@ 2018-02-07 10:45 ` Matthias Brugger
0 siblings, 0 replies; 85+ messages in thread
From: Matthias Brugger @ 2018-02-07 10:45 UTC (permalink / raw)
To: sean.wang-NuS5LvNUpcJWk0Htik3J/w, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
mark.rutland-5wv7dgnIgG8, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Rob Herring, Stephen Boyd
On 02/06/2018 10:52 AM, sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org wrote:
> From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
>
> All ethsys, pciesys and ssusbsys internally include reset controller, so
> explicitly add back these missing cell definitions to related bindings
> and examples.
>
> Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
> Reviewed-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> ---
> Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt | 2 ++
> Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt | 2 ++
> Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt | 2 ++
> 3 files changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
> index 7aa3fa1..8f5335b 100644
> --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
> @@ -9,6 +9,7 @@ Required Properties:
> - "mediatek,mt2701-ethsys", "syscon"
> - "mediatek,mt7622-ethsys", "syscon"
> - #clock-cells: Must be 1
> +- #reset-cells: Must be 1
>
> The ethsys controller uses the common clk binding from
> Documentation/devicetree/bindings/clock/clock-bindings.txt
> @@ -20,4 +21,5 @@ ethsys: clock-controller@1b000000 {
> compatible = "mediatek,mt2701-ethsys", "syscon";
> reg = <0 0x1b000000 0 0x1000>;
> #clock-cells = <1>;
> + #reset-cells = <1>;
The example is already fixed upstream, but I forgot the binding description,
please rebase this patch.
And please don't forget to add all clock maintainers.
Regards,
Matthias
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 85+ messages in thread* Re: [PATCH v2 01/16] dt-bindings: clock: mediatek: add missing required #reset-cells
@ 2018-02-09 3:38 ` Sean Wang
0 siblings, 0 replies; 85+ messages in thread
From: Sean Wang @ 2018-02-09 3:38 UTC (permalink / raw)
To: Matthias Brugger
Cc: robh+dt, mark.rutland, devicetree, linux-mediatek,
linux-arm-kernel, linux-kernel, Rob Herring, Stephen Boyd
On Wed, 2018-02-07 at 11:45 +0100, Matthias Brugger wrote:
>
> On 02/06/2018 10:52 AM, sean.wang@mediatek.com wrote:
> > From: Sean Wang <sean.wang@mediatek.com>
> >
> > All ethsys, pciesys and ssusbsys internally include reset controller, so
> > explicitly add back these missing cell definitions to related bindings
> > and examples.
> >
> > Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> > Cc: Rob Herring <robh@kernel.org>
> > Cc: Stephen Boyd <sboyd@codeaurora.org>
> > Reviewed-by: Rob Herring <robh@kernel.org>
> > ---
> > Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt | 2 ++
> > Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt | 2 ++
> > Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt | 2 ++
> > 3 files changed, 6 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
> > index 7aa3fa1..8f5335b 100644
> > --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
> > +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
> > @@ -9,6 +9,7 @@ Required Properties:
> > - "mediatek,mt2701-ethsys", "syscon"
> > - "mediatek,mt7622-ethsys", "syscon"
> > - #clock-cells: Must be 1
> > +- #reset-cells: Must be 1
> >
> > The ethsys controller uses the common clk binding from
> > Documentation/devicetree/bindings/clock/clock-bindings.txt
> > @@ -20,4 +21,5 @@ ethsys: clock-controller@1b000000 {
> > compatible = "mediatek,mt2701-ethsys", "syscon";
> > reg = <0 0x1b000000 0 0x1000>;
> > #clock-cells = <1>;
> > + #reset-cells = <1>;
>
> The example is already fixed upstream, but I forgot the binding description,
> please rebase this patch.
>
> And please don't forget to add all clock maintainers.
>
okay, i will do it.
> Regards,
> Matthias
>
^ permalink raw reply [flat|nested] 85+ messages in thread* [PATCH v2 01/16] dt-bindings: clock: mediatek: add missing required #reset-cells
@ 2018-02-09 3:38 ` Sean Wang
0 siblings, 0 replies; 85+ messages in thread
From: Sean Wang @ 2018-02-09 3:38 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 2018-02-07 at 11:45 +0100, Matthias Brugger wrote:
>
> On 02/06/2018 10:52 AM, sean.wang at mediatek.com wrote:
> > From: Sean Wang <sean.wang@mediatek.com>
> >
> > All ethsys, pciesys and ssusbsys internally include reset controller, so
> > explicitly add back these missing cell definitions to related bindings
> > and examples.
> >
> > Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> > Cc: Rob Herring <robh@kernel.org>
> > Cc: Stephen Boyd <sboyd@codeaurora.org>
> > Reviewed-by: Rob Herring <robh@kernel.org>
> > ---
> > Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt | 2 ++
> > Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt | 2 ++
> > Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt | 2 ++
> > 3 files changed, 6 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
> > index 7aa3fa1..8f5335b 100644
> > --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
> > +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
> > @@ -9,6 +9,7 @@ Required Properties:
> > - "mediatek,mt2701-ethsys", "syscon"
> > - "mediatek,mt7622-ethsys", "syscon"
> > - #clock-cells: Must be 1
> > +- #reset-cells: Must be 1
> >
> > The ethsys controller uses the common clk binding from
> > Documentation/devicetree/bindings/clock/clock-bindings.txt
> > @@ -20,4 +21,5 @@ ethsys: clock-controller at 1b000000 {
> > compatible = "mediatek,mt2701-ethsys", "syscon";
> > reg = <0 0x1b000000 0 0x1000>;
> > #clock-cells = <1>;
> > + #reset-cells = <1>;
>
> The example is already fixed upstream, but I forgot the binding description,
> please rebase this patch.
>
> And please don't forget to add all clock maintainers.
>
okay, i will do it.
> Regards,
> Matthias
>
^ permalink raw reply [flat|nested] 85+ messages in thread* Re: [PATCH v2 01/16] dt-bindings: clock: mediatek: add missing required #reset-cells
@ 2018-02-09 3:38 ` Sean Wang
0 siblings, 0 replies; 85+ messages in thread
From: Sean Wang @ 2018-02-09 3:38 UTC (permalink / raw)
To: Matthias Brugger
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Rob Herring, Stephen Boyd
On Wed, 2018-02-07 at 11:45 +0100, Matthias Brugger wrote:
>
> On 02/06/2018 10:52 AM, sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org wrote:
> > From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> >
> > All ethsys, pciesys and ssusbsys internally include reset controller, so
> > explicitly add back these missing cell definitions to related bindings
> > and examples.
> >
> > Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> > Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> > Cc: Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
> > Reviewed-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> > ---
> > Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt | 2 ++
> > Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt | 2 ++
> > Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt | 2 ++
> > 3 files changed, 6 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
> > index 7aa3fa1..8f5335b 100644
> > --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
> > +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
> > @@ -9,6 +9,7 @@ Required Properties:
> > - "mediatek,mt2701-ethsys", "syscon"
> > - "mediatek,mt7622-ethsys", "syscon"
> > - #clock-cells: Must be 1
> > +- #reset-cells: Must be 1
> >
> > The ethsys controller uses the common clk binding from
> > Documentation/devicetree/bindings/clock/clock-bindings.txt
> > @@ -20,4 +21,5 @@ ethsys: clock-controller@1b000000 {
> > compatible = "mediatek,mt2701-ethsys", "syscon";
> > reg = <0 0x1b000000 0 0x1000>;
> > #clock-cells = <1>;
> > + #reset-cells = <1>;
>
> The example is already fixed upstream, but I forgot the binding description,
> please rebase this patch.
>
> And please don't forget to add all clock maintainers.
>
okay, i will do it.
> Regards,
> Matthias
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 85+ messages in thread
* [PATCH v2 02/16] arm64: dts: mt7622: add clock controller device nodes
@ 2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang @ 2018-02-06 9:52 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel, Sean Wang, Stephen Boyd
From: Sean Wang <sean.wang@mediatek.com>
Add clock controller nodes for MT7622 and include header for topckgen,
infracfg, pericfg, apmixedsys, ethsys, sgmiisys, pciesys and ssusbsys
for those devices nodes to be added afterwards.
In addition, provides an oscillator node for the source of PLLs and dummy
clock for PWARP to complement missing support of clock gate for the
wrapper circuit in the driver.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
---
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 76 ++++++++++++++++++++++++++++++++
1 file changed, 76 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index b111fec..73e5d62 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -8,6 +8,8 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7622-clk.h>
+#include <dt-bindings/reset/mt7622-reset.h>
/ {
compatible = "mediatek,mt7622";
@@ -48,6 +50,19 @@
clock-frequency = <280000000>;
};
+ pwrap_clk: dummy40m {
+ compatible = "fixed-clock";
+ clock-frequency = <40000000>;
+ #clock-cells = <0>;
+ };
+
+ clk25m: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ clock-output-names = "clkxtal";
+ };
+
psci {
compatible = "arm,psci-0.2";
method = "smc";
@@ -78,6 +93,22 @@
IRQ_TYPE_LEVEL_HIGH)>;
};
+ infracfg: infracfg@10000000 {
+ compatible = "mediatek,mt7622-infracfg",
+ "syscon";
+ reg = <0 0x10000000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pericfg: pericfg@10002000 {
+ compatible = "mediatek,mt7622-pericfg",
+ "syscon";
+ reg = <0 0x10002000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
sysirq: interrupt-controller@10200620 {
compatible = "mediatek,mt7622-sysirq",
"mediatek,mt6577-sysirq";
@@ -87,6 +118,20 @@
reg = <0 0x10200620 0 0x20>;
};
+ apmixedsys: apmixedsys@10209000 {
+ compatible = "mediatek,mt7622-apmixedsys",
+ "syscon";
+ reg = <0 0x10209000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ topckgen: topckgen@10210000 {
+ compatible = "mediatek,mt7622-topckgen",
+ "syscon";
+ reg = <0 0x10210000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
gic: interrupt-controller@10300000 {
compatible = "arm,gic-400";
interrupt-controller;
@@ -107,4 +152,35 @@
clock-names = "baud", "bus";
status = "disabled";
};
+
+ ssusbsys: ssusbsys@1a000000 {
+ compatible = "mediatek,mt7622-ssusbsys",
+ "syscon";
+ reg = <0 0x1a000000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pciesys: pciesys@1a100800 {
+ compatible = "mediatek,mt7622-pciesys",
+ "syscon";
+ reg = <0 0x1a100800 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ ethsys: syscon@1b000000 {
+ compatible = "mediatek,mt7622-ethsys",
+ "syscon";
+ reg = <0 0x1b000000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ sgmiisys: sgmiisys@1b128000 {
+ compatible = "mediatek,mt7622-sgmiisys",
+ "syscon";
+ reg = <0 0x1b128000 0 0x1000>;
+ #clock-cells = <1>;
+ };
};
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 02/16] arm64: dts: mt7622: add clock controller device nodes
@ 2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang at mediatek.com @ 2018-02-06 9:52 UTC (permalink / raw)
To: linux-arm-kernel
From: Sean Wang <sean.wang@mediatek.com>
Add clock controller nodes for MT7622 and include header for topckgen,
infracfg, pericfg, apmixedsys, ethsys, sgmiisys, pciesys and ssusbsys
for those devices nodes to be added afterwards.
In addition, provides an oscillator node for the source of PLLs and dummy
clock for PWARP to complement missing support of clock gate for the
wrapper circuit in the driver.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
---
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 76 ++++++++++++++++++++++++++++++++
1 file changed, 76 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index b111fec..73e5d62 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -8,6 +8,8 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7622-clk.h>
+#include <dt-bindings/reset/mt7622-reset.h>
/ {
compatible = "mediatek,mt7622";
@@ -48,6 +50,19 @@
clock-frequency = <280000000>;
};
+ pwrap_clk: dummy40m {
+ compatible = "fixed-clock";
+ clock-frequency = <40000000>;
+ #clock-cells = <0>;
+ };
+
+ clk25m: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ clock-output-names = "clkxtal";
+ };
+
psci {
compatible = "arm,psci-0.2";
method = "smc";
@@ -78,6 +93,22 @@
IRQ_TYPE_LEVEL_HIGH)>;
};
+ infracfg: infracfg at 10000000 {
+ compatible = "mediatek,mt7622-infracfg",
+ "syscon";
+ reg = <0 0x10000000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pericfg: pericfg at 10002000 {
+ compatible = "mediatek,mt7622-pericfg",
+ "syscon";
+ reg = <0 0x10002000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
sysirq: interrupt-controller at 10200620 {
compatible = "mediatek,mt7622-sysirq",
"mediatek,mt6577-sysirq";
@@ -87,6 +118,20 @@
reg = <0 0x10200620 0 0x20>;
};
+ apmixedsys: apmixedsys at 10209000 {
+ compatible = "mediatek,mt7622-apmixedsys",
+ "syscon";
+ reg = <0 0x10209000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ topckgen: topckgen at 10210000 {
+ compatible = "mediatek,mt7622-topckgen",
+ "syscon";
+ reg = <0 0x10210000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
gic: interrupt-controller at 10300000 {
compatible = "arm,gic-400";
interrupt-controller;
@@ -107,4 +152,35 @@
clock-names = "baud", "bus";
status = "disabled";
};
+
+ ssusbsys: ssusbsys at 1a000000 {
+ compatible = "mediatek,mt7622-ssusbsys",
+ "syscon";
+ reg = <0 0x1a000000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pciesys: pciesys at 1a100800 {
+ compatible = "mediatek,mt7622-pciesys",
+ "syscon";
+ reg = <0 0x1a100800 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ ethsys: syscon at 1b000000 {
+ compatible = "mediatek,mt7622-ethsys",
+ "syscon";
+ reg = <0 0x1b000000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ sgmiisys: sgmiisys at 1b128000 {
+ compatible = "mediatek,mt7622-sgmiisys",
+ "syscon";
+ reg = <0 0x1b128000 0 0x1000>;
+ #clock-cells = <1>;
+ };
};
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 02/16] arm64: dts: mt7622: add clock controller device nodes
@ 2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2018-02-06 9:52 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Sean Wang, Stephen Boyd
From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Add clock controller nodes for MT7622 and include header for topckgen,
infracfg, pericfg, apmixedsys, ethsys, sgmiisys, pciesys and ssusbsys
for those devices nodes to be added afterwards.
In addition, provides an oscillator node for the source of PLLs and dummy
clock for PWARP to complement missing support of clock gate for the
wrapper circuit in the driver.
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Cc: Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
---
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 76 ++++++++++++++++++++++++++++++++
1 file changed, 76 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index b111fec..73e5d62 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -8,6 +8,8 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7622-clk.h>
+#include <dt-bindings/reset/mt7622-reset.h>
/ {
compatible = "mediatek,mt7622";
@@ -48,6 +50,19 @@
clock-frequency = <280000000>;
};
+ pwrap_clk: dummy40m {
+ compatible = "fixed-clock";
+ clock-frequency = <40000000>;
+ #clock-cells = <0>;
+ };
+
+ clk25m: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ clock-output-names = "clkxtal";
+ };
+
psci {
compatible = "arm,psci-0.2";
method = "smc";
@@ -78,6 +93,22 @@
IRQ_TYPE_LEVEL_HIGH)>;
};
+ infracfg: infracfg@10000000 {
+ compatible = "mediatek,mt7622-infracfg",
+ "syscon";
+ reg = <0 0x10000000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pericfg: pericfg@10002000 {
+ compatible = "mediatek,mt7622-pericfg",
+ "syscon";
+ reg = <0 0x10002000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
sysirq: interrupt-controller@10200620 {
compatible = "mediatek,mt7622-sysirq",
"mediatek,mt6577-sysirq";
@@ -87,6 +118,20 @@
reg = <0 0x10200620 0 0x20>;
};
+ apmixedsys: apmixedsys@10209000 {
+ compatible = "mediatek,mt7622-apmixedsys",
+ "syscon";
+ reg = <0 0x10209000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ topckgen: topckgen@10210000 {
+ compatible = "mediatek,mt7622-topckgen",
+ "syscon";
+ reg = <0 0x10210000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
gic: interrupt-controller@10300000 {
compatible = "arm,gic-400";
interrupt-controller;
@@ -107,4 +152,35 @@
clock-names = "baud", "bus";
status = "disabled";
};
+
+ ssusbsys: ssusbsys@1a000000 {
+ compatible = "mediatek,mt7622-ssusbsys",
+ "syscon";
+ reg = <0 0x1a000000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pciesys: pciesys@1a100800 {
+ compatible = "mediatek,mt7622-pciesys",
+ "syscon";
+ reg = <0 0x1a100800 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ ethsys: syscon@1b000000 {
+ compatible = "mediatek,mt7622-ethsys",
+ "syscon";
+ reg = <0 0x1b000000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ sgmiisys: sgmiisys@1b128000 {
+ compatible = "mediatek,mt7622-sgmiisys",
+ "syscon";
+ reg = <0 0x1b128000 0 0x1000>;
+ #clock-cells = <1>;
+ };
};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 85+ messages in thread
* [PATCH v2 03/16] arm64: dts: mt7622: add power domain controller device nodes
@ 2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang @ 2018-02-06 9:52 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel, Sean Wang
From: Sean Wang <sean.wang@mediatek.com>
add power domain controller nodes
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
---
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 73e5d62..81207e6 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/mt7622-clk.h>
+#include <dt-bindings/power/mt7622-power.h>
#include <dt-bindings/reset/mt7622-reset.h>
/ {
@@ -109,6 +110,20 @@
#reset-cells = <1>;
};
+ scpsys: scpsys@10006000 {
+ compatible = "mediatek,mt7622-scpsys",
+ "syscon";
+ #power-domain-cells = <1>;
+ reg = <0 0x10006000 0 0x1000>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>;
+ infracfg = <&infracfg>;
+ clocks = <&topckgen CLK_TOP_HIF_SEL>;
+ clock-names = "hif_sel";
+ };
+
sysirq: interrupt-controller@10200620 {
compatible = "mediatek,mt7622-sysirq",
"mediatek,mt6577-sysirq";
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 03/16] arm64: dts: mt7622: add power domain controller device nodes
@ 2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang at mediatek.com @ 2018-02-06 9:52 UTC (permalink / raw)
To: linux-arm-kernel
From: Sean Wang <sean.wang@mediatek.com>
add power domain controller nodes
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
---
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 73e5d62..81207e6 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/mt7622-clk.h>
+#include <dt-bindings/power/mt7622-power.h>
#include <dt-bindings/reset/mt7622-reset.h>
/ {
@@ -109,6 +110,20 @@
#reset-cells = <1>;
};
+ scpsys: scpsys at 10006000 {
+ compatible = "mediatek,mt7622-scpsys",
+ "syscon";
+ #power-domain-cells = <1>;
+ reg = <0 0x10006000 0 0x1000>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>;
+ infracfg = <&infracfg>;
+ clocks = <&topckgen CLK_TOP_HIF_SEL>;
+ clock-names = "hif_sel";
+ };
+
sysirq: interrupt-controller at 10200620 {
compatible = "mediatek,mt7622-sysirq",
"mediatek,mt6577-sysirq";
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 03/16] arm64: dts: mt7622: add power domain controller device nodes
@ 2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2018-02-06 9:52 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Sean Wang
From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
add power domain controller nodes
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Cc: Matthias Brugger <matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 73e5d62..81207e6 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/mt7622-clk.h>
+#include <dt-bindings/power/mt7622-power.h>
#include <dt-bindings/reset/mt7622-reset.h>
/ {
@@ -109,6 +110,20 @@
#reset-cells = <1>;
};
+ scpsys: scpsys@10006000 {
+ compatible = "mediatek,mt7622-scpsys",
+ "syscon";
+ #power-domain-cells = <1>;
+ reg = <0 0x10006000 0 0x1000>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>;
+ infracfg = <&infracfg>;
+ clocks = <&topckgen CLK_TOP_HIF_SEL>;
+ clock-names = "hif_sel";
+ };
+
sysirq: interrupt-controller@10200620 {
compatible = "mediatek,mt7622-sysirq",
"mediatek,mt6577-sysirq";
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 85+ messages in thread
* [PATCH v2 04/16] arm64: dts: mt7622: add pinctrl related device nodes
@ 2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang @ 2018-02-06 9:52 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel, Sean Wang
From: Sean Wang <sean.wang@mediatek.com>
add pinctrl device nodes and rfb1 board, additionally include all pin
groups possible being used on rfb1 board and available gpio keys.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 200 +++++++++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 7 +
2 files changed, 207 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index c08309d..bd1093a 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -7,6 +7,8 @@
*/
/dts-v1/;
+#include <dt-bindings/input/input.h>
+
#include "mt7622.dtsi"
/ {
@@ -17,11 +19,209 @@
bootargs = "console=ttyS0,115200n1";
};
+ gpio-keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ factory {
+ label = "factory";
+ linux,code = <BTN_0>;
+ gpios = <&pio 0 0>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 102 0>;
+ };
+ };
+
memory {
reg = <0 0x40000000 0 0x3F000000>;
};
};
+&pio {
+ /* eMMC is shared pin with parallel NAND */
+ emmc_pins_default: emmc-pins-default {
+ mux {
+ function = "emmc", "emmc_rst";
+ groups = "emmc";
+ };
+ };
+
+ emmc_pins_uhs: emmc-pins-uhs {
+ mux {
+ function = "emmc";
+ groups = "emmc";
+ };
+ };
+
+ eth_pins: eth-pins {
+ mux {
+ function = "eth";
+ groups = "mdc_mdio", "rgmii_via_gmac2";
+ };
+ };
+
+ i2c1_pins: i2c1-pins {
+ mux {
+ function = "i2c";
+ groups = "i2c1_0";
+ };
+ };
+
+ i2c2_pins: i2c2-pins {
+ mux {
+ function = "i2c";
+ groups = "i2c2_0";
+ };
+ };
+
+ i2s1_pins: i2s1-pins {
+ mux {
+ function = "i2s";
+ groups = "i2s_out_bclk_ws_mclk",
+ "i2s1_in_data",
+ "i2s1_out_data";
+ };
+ };
+
+ irrx_pins: irrx-pins {
+ mux {
+ function = "ir";
+ groups = "ir_1_rx";
+ };
+ };
+
+ irtx_pins: irtx-pins {
+ mux {
+ function = "ir";
+ groups = "ir_1_tx";
+ };
+ };
+
+ /* Parallel nand is shared pin with eMMC */
+ parallel_nand_pins: parallel-nand-pins {
+ mux {
+ function = "flash";
+ groups = "par_nand";
+ };
+ };
+
+ pcie0_pins: pcie0-pins {
+ mux {
+ groups = "pcie0_pad_perst",
+ "pcie0_1_waken",
+ "pcie0_1_clkreq";
+ function = "pcie";
+ };
+ };
+
+ pcie1_pins: pcie1-pins {
+ mux {
+ groups = "pcie1_pad_perst",
+ "pcie1_0_waken",
+ "pcie1_0_clkreq";
+ function = "pcie";
+ };
+ };
+
+ pmic_bus_pins: pmic-bus-pins {
+ mux {
+ groups = "pmic_bus";
+ function = "pmic";
+ };
+ };
+
+ pwm7_pins: pwm1-2-pins {
+ mux {
+ function = "pwm";
+ groups = "pwm_ch7_2";
+ };
+ };
+
+ wled_pins: wled-pins {
+ mux {
+ function = "led";
+ groups = "wled";
+ };
+ };
+
+ sd0_pins_default: sd0-pins-default {
+ mux {
+ function = "sd";
+ groups = "sd_0";
+ };
+ };
+
+ sd0_pins_uhs: sd0-pins-uhs {
+ mux {
+ function = "sd";
+ groups = "sd_0";
+ };
+ };
+
+ /* Serial NAND is shared pin with SPI-NOR */
+ serial_nand_pins: serial-nand-pins {
+ mux {
+ function = "flash";
+ groups = "snfi";
+ };
+ };
+
+ spic0_pins: spic0-pins {
+ mux {
+ function = "spi";
+ groups = "spic0_0";
+ };
+ };
+
+ spic1_pins: spic1-pins {
+ mux {
+ function = "spi";
+ groups = "spic1_0";
+ };
+ };
+
+ /* SPI-NOR is shared pin with serial NAND */
+ spi_nor_pins: spi-nor-pins {
+ mux {
+ function = "flash";
+ groups = "spi_nor";
+ };
+ };
+
+ /* serial NAND is shared pin with SPI-NOR */
+ serial_nand_pins: serial-nand-pins {
+ mux {
+ function = "flash";
+ groups = "snfi";
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ mux {
+ function = "uart";
+ groups = "uart0_0_tx_rx" ;
+ };
+ };
+
+ uart2_pins: uart2-pins {
+ mux {
+ function = "uart";
+ groups = "uart2_1_tx_rx" ;
+ };
+ };
+
+ watchdog_pins: watchdog-pins {
+ mux {
+ function = "watchdog";
+ groups = "watchdog";
+ };
+ };
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 81207e6..8211bf7 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -147,6 +147,13 @@
#clock-cells = <1>;
};
+ pio: pinctrl@10211000 {
+ compatible = "mediatek,mt7622-pinctrl";
+ reg = <0 0x10211000 0 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
gic: interrupt-controller@10300000 {
compatible = "arm,gic-400";
interrupt-controller;
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 04/16] arm64: dts: mt7622: add pinctrl related device nodes
@ 2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang at mediatek.com @ 2018-02-06 9:52 UTC (permalink / raw)
To: linux-arm-kernel
From: Sean Wang <sean.wang@mediatek.com>
add pinctrl device nodes and rfb1 board, additionally include all pin
groups possible being used on rfb1 board and available gpio keys.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 200 +++++++++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 7 +
2 files changed, 207 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index c08309d..bd1093a 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -7,6 +7,8 @@
*/
/dts-v1/;
+#include <dt-bindings/input/input.h>
+
#include "mt7622.dtsi"
/ {
@@ -17,11 +19,209 @@
bootargs = "console=ttyS0,115200n1";
};
+ gpio-keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ factory {
+ label = "factory";
+ linux,code = <BTN_0>;
+ gpios = <&pio 0 0>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 102 0>;
+ };
+ };
+
memory {
reg = <0 0x40000000 0 0x3F000000>;
};
};
+&pio {
+ /* eMMC is shared pin with parallel NAND */
+ emmc_pins_default: emmc-pins-default {
+ mux {
+ function = "emmc", "emmc_rst";
+ groups = "emmc";
+ };
+ };
+
+ emmc_pins_uhs: emmc-pins-uhs {
+ mux {
+ function = "emmc";
+ groups = "emmc";
+ };
+ };
+
+ eth_pins: eth-pins {
+ mux {
+ function = "eth";
+ groups = "mdc_mdio", "rgmii_via_gmac2";
+ };
+ };
+
+ i2c1_pins: i2c1-pins {
+ mux {
+ function = "i2c";
+ groups = "i2c1_0";
+ };
+ };
+
+ i2c2_pins: i2c2-pins {
+ mux {
+ function = "i2c";
+ groups = "i2c2_0";
+ };
+ };
+
+ i2s1_pins: i2s1-pins {
+ mux {
+ function = "i2s";
+ groups = "i2s_out_bclk_ws_mclk",
+ "i2s1_in_data",
+ "i2s1_out_data";
+ };
+ };
+
+ irrx_pins: irrx-pins {
+ mux {
+ function = "ir";
+ groups = "ir_1_rx";
+ };
+ };
+
+ irtx_pins: irtx-pins {
+ mux {
+ function = "ir";
+ groups = "ir_1_tx";
+ };
+ };
+
+ /* Parallel nand is shared pin with eMMC */
+ parallel_nand_pins: parallel-nand-pins {
+ mux {
+ function = "flash";
+ groups = "par_nand";
+ };
+ };
+
+ pcie0_pins: pcie0-pins {
+ mux {
+ groups = "pcie0_pad_perst",
+ "pcie0_1_waken",
+ "pcie0_1_clkreq";
+ function = "pcie";
+ };
+ };
+
+ pcie1_pins: pcie1-pins {
+ mux {
+ groups = "pcie1_pad_perst",
+ "pcie1_0_waken",
+ "pcie1_0_clkreq";
+ function = "pcie";
+ };
+ };
+
+ pmic_bus_pins: pmic-bus-pins {
+ mux {
+ groups = "pmic_bus";
+ function = "pmic";
+ };
+ };
+
+ pwm7_pins: pwm1-2-pins {
+ mux {
+ function = "pwm";
+ groups = "pwm_ch7_2";
+ };
+ };
+
+ wled_pins: wled-pins {
+ mux {
+ function = "led";
+ groups = "wled";
+ };
+ };
+
+ sd0_pins_default: sd0-pins-default {
+ mux {
+ function = "sd";
+ groups = "sd_0";
+ };
+ };
+
+ sd0_pins_uhs: sd0-pins-uhs {
+ mux {
+ function = "sd";
+ groups = "sd_0";
+ };
+ };
+
+ /* Serial NAND is shared pin with SPI-NOR */
+ serial_nand_pins: serial-nand-pins {
+ mux {
+ function = "flash";
+ groups = "snfi";
+ };
+ };
+
+ spic0_pins: spic0-pins {
+ mux {
+ function = "spi";
+ groups = "spic0_0";
+ };
+ };
+
+ spic1_pins: spic1-pins {
+ mux {
+ function = "spi";
+ groups = "spic1_0";
+ };
+ };
+
+ /* SPI-NOR is shared pin with serial NAND */
+ spi_nor_pins: spi-nor-pins {
+ mux {
+ function = "flash";
+ groups = "spi_nor";
+ };
+ };
+
+ /* serial NAND is shared pin with SPI-NOR */
+ serial_nand_pins: serial-nand-pins {
+ mux {
+ function = "flash";
+ groups = "snfi";
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ mux {
+ function = "uart";
+ groups = "uart0_0_tx_rx" ;
+ };
+ };
+
+ uart2_pins: uart2-pins {
+ mux {
+ function = "uart";
+ groups = "uart2_1_tx_rx" ;
+ };
+ };
+
+ watchdog_pins: watchdog-pins {
+ mux {
+ function = "watchdog";
+ groups = "watchdog";
+ };
+ };
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 81207e6..8211bf7 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -147,6 +147,13 @@
#clock-cells = <1>;
};
+ pio: pinctrl at 10211000 {
+ compatible = "mediatek,mt7622-pinctrl";
+ reg = <0 0x10211000 0 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
gic: interrupt-controller at 10300000 {
compatible = "arm,gic-400";
interrupt-controller;
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 04/16] arm64: dts: mt7622: add pinctrl related device nodes
@ 2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2018-02-06 9:52 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Sean Wang
From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
add pinctrl device nodes and rfb1 board, additionally include all pin
groups possible being used on rfb1 board and available gpio keys.
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 200 +++++++++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 7 +
2 files changed, 207 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index c08309d..bd1093a 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -7,6 +7,8 @@
*/
/dts-v1/;
+#include <dt-bindings/input/input.h>
+
#include "mt7622.dtsi"
/ {
@@ -17,11 +19,209 @@
bootargs = "console=ttyS0,115200n1";
};
+ gpio-keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ factory {
+ label = "factory";
+ linux,code = <BTN_0>;
+ gpios = <&pio 0 0>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 102 0>;
+ };
+ };
+
memory {
reg = <0 0x40000000 0 0x3F000000>;
};
};
+&pio {
+ /* eMMC is shared pin with parallel NAND */
+ emmc_pins_default: emmc-pins-default {
+ mux {
+ function = "emmc", "emmc_rst";
+ groups = "emmc";
+ };
+ };
+
+ emmc_pins_uhs: emmc-pins-uhs {
+ mux {
+ function = "emmc";
+ groups = "emmc";
+ };
+ };
+
+ eth_pins: eth-pins {
+ mux {
+ function = "eth";
+ groups = "mdc_mdio", "rgmii_via_gmac2";
+ };
+ };
+
+ i2c1_pins: i2c1-pins {
+ mux {
+ function = "i2c";
+ groups = "i2c1_0";
+ };
+ };
+
+ i2c2_pins: i2c2-pins {
+ mux {
+ function = "i2c";
+ groups = "i2c2_0";
+ };
+ };
+
+ i2s1_pins: i2s1-pins {
+ mux {
+ function = "i2s";
+ groups = "i2s_out_bclk_ws_mclk",
+ "i2s1_in_data",
+ "i2s1_out_data";
+ };
+ };
+
+ irrx_pins: irrx-pins {
+ mux {
+ function = "ir";
+ groups = "ir_1_rx";
+ };
+ };
+
+ irtx_pins: irtx-pins {
+ mux {
+ function = "ir";
+ groups = "ir_1_tx";
+ };
+ };
+
+ /* Parallel nand is shared pin with eMMC */
+ parallel_nand_pins: parallel-nand-pins {
+ mux {
+ function = "flash";
+ groups = "par_nand";
+ };
+ };
+
+ pcie0_pins: pcie0-pins {
+ mux {
+ groups = "pcie0_pad_perst",
+ "pcie0_1_waken",
+ "pcie0_1_clkreq";
+ function = "pcie";
+ };
+ };
+
+ pcie1_pins: pcie1-pins {
+ mux {
+ groups = "pcie1_pad_perst",
+ "pcie1_0_waken",
+ "pcie1_0_clkreq";
+ function = "pcie";
+ };
+ };
+
+ pmic_bus_pins: pmic-bus-pins {
+ mux {
+ groups = "pmic_bus";
+ function = "pmic";
+ };
+ };
+
+ pwm7_pins: pwm1-2-pins {
+ mux {
+ function = "pwm";
+ groups = "pwm_ch7_2";
+ };
+ };
+
+ wled_pins: wled-pins {
+ mux {
+ function = "led";
+ groups = "wled";
+ };
+ };
+
+ sd0_pins_default: sd0-pins-default {
+ mux {
+ function = "sd";
+ groups = "sd_0";
+ };
+ };
+
+ sd0_pins_uhs: sd0-pins-uhs {
+ mux {
+ function = "sd";
+ groups = "sd_0";
+ };
+ };
+
+ /* Serial NAND is shared pin with SPI-NOR */
+ serial_nand_pins: serial-nand-pins {
+ mux {
+ function = "flash";
+ groups = "snfi";
+ };
+ };
+
+ spic0_pins: spic0-pins {
+ mux {
+ function = "spi";
+ groups = "spic0_0";
+ };
+ };
+
+ spic1_pins: spic1-pins {
+ mux {
+ function = "spi";
+ groups = "spic1_0";
+ };
+ };
+
+ /* SPI-NOR is shared pin with serial NAND */
+ spi_nor_pins: spi-nor-pins {
+ mux {
+ function = "flash";
+ groups = "spi_nor";
+ };
+ };
+
+ /* serial NAND is shared pin with SPI-NOR */
+ serial_nand_pins: serial-nand-pins {
+ mux {
+ function = "flash";
+ groups = "snfi";
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ mux {
+ function = "uart";
+ groups = "uart0_0_tx_rx" ;
+ };
+ };
+
+ uart2_pins: uart2-pins {
+ mux {
+ function = "uart";
+ groups = "uart2_1_tx_rx" ;
+ };
+ };
+
+ watchdog_pins: watchdog-pins {
+ mux {
+ function = "watchdog";
+ groups = "watchdog";
+ };
+ };
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 81207e6..8211bf7 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -147,6 +147,13 @@
#clock-cells = <1>;
};
+ pio: pinctrl@10211000 {
+ compatible = "mediatek,mt7622-pinctrl";
+ reg = <0 0x10211000 0 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
gic: interrupt-controller@10300000 {
compatible = "arm,gic-400";
interrupt-controller;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 85+ messages in thread* Re: [PATCH v2 04/16] arm64: dts: mt7622: add pinctrl related device nodes
2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
@ 2018-02-07 11:31 ` Matthias Brugger
-1 siblings, 0 replies; 85+ messages in thread
From: Matthias Brugger @ 2018-02-07 11:31 UTC (permalink / raw)
To: sean.wang, robh+dt, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel
On 02/06/2018 10:52 AM, sean.wang@mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
>
> add pinctrl device nodes and rfb1 board, additionally include all pin
> groups possible being used on rfb1 board and available gpio keys.
>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 200 +++++++++++++++++++++++++++
> arch/arm64/boot/dts/mediatek/mt7622.dtsi | 7 +
> 2 files changed, 207 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> index c08309d..bd1093a 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> @@ -7,6 +7,8 @@
> */
>
> /dts-v1/;
> +#include <dt-bindings/input/input.h>
> +
> #include "mt7622.dtsi"
>
> / {
> @@ -17,11 +19,209 @@
> bootargs = "console=ttyS0,115200n1";
> };
>
> + gpio-keys {
> + compatible = "gpio-keys-polled";
> + poll-interval = <100>;
> +
> + factory {
> + label = "factory";
> + linux,code = <BTN_0>;
> + gpios = <&pio 0 0>;
> + };
> +
> + wps {
> + label = "wps";
> + linux,code = <KEY_WPS_BUTTON>;
> + gpios = <&pio 102 0>;
> + };
> + };
> +
> memory {
> reg = <0 0x40000000 0 0x3F000000>;
> };
> };
>
> +&pio {
> + /* eMMC is shared pin with parallel NAND */
> + emmc_pins_default: emmc-pins-default {
> + mux {
> + function = "emmc", "emmc_rst";
> + groups = "emmc";
> + };
> + };
> +
> + emmc_pins_uhs: emmc-pins-uhs {
> + mux {
> + function = "emmc";
> + groups = "emmc";
> + };
> + };
> +
> + eth_pins: eth-pins {
> + mux {
> + function = "eth";
> + groups = "mdc_mdio", "rgmii_via_gmac2";
> + };
> + };
> +
> + i2c1_pins: i2c1-pins {
> + mux {
> + function = "i2c";
> + groups = "i2c1_0";
> + };
> + };
> +
> + i2c2_pins: i2c2-pins {
> + mux {
> + function = "i2c";
> + groups = "i2c2_0";
> + };
> + };
> +
> + i2s1_pins: i2s1-pins {
> + mux {
> + function = "i2s";
> + groups = "i2s_out_bclk_ws_mclk",
> + "i2s1_in_data",
> + "i2s1_out_data";
> + };
> + };
> +
> + irrx_pins: irrx-pins {
> + mux {
> + function = "ir";
> + groups = "ir_1_rx";
> + };
> + };
> +
> + irtx_pins: irtx-pins {
> + mux {
> + function = "ir";
> + groups = "ir_1_tx";
> + };
> + };
> +
> + /* Parallel nand is shared pin with eMMC */
> + parallel_nand_pins: parallel-nand-pins {
> + mux {
> + function = "flash";
> + groups = "par_nand";
> + };
> + };
> +
> + pcie0_pins: pcie0-pins {
> + mux {
> + groups = "pcie0_pad_perst",
> + "pcie0_1_waken",
> + "pcie0_1_clkreq";
> + function = "pcie";
> + };
> + };
> +
> + pcie1_pins: pcie1-pins {
> + mux {
> + groups = "pcie1_pad_perst",
> + "pcie1_0_waken",
> + "pcie1_0_clkreq";
> + function = "pcie";
> + };
> + };
> +
> + pmic_bus_pins: pmic-bus-pins {
> + mux {
> + groups = "pmic_bus";
> + function = "pmic";
> + };
> + };
Some bikeshedding here. Can you please add function before groups, so that it is
uniform through out the file?
Thanks,
Matthias
> +
> + pwm7_pins: pwm1-2-pins {
> + mux {
> + function = "pwm";
> + groups = "pwm_ch7_2";
> + };
> + };
> +
> + wled_pins: wled-pins {
> + mux {
> + function = "led";
> + groups = "wled";
> + };
> + };
> +
> + sd0_pins_default: sd0-pins-default {
> + mux {
> + function = "sd";
> + groups = "sd_0";
> + };
> + };
> +
> + sd0_pins_uhs: sd0-pins-uhs {
> + mux {
> + function = "sd";
> + groups = "sd_0";
> + };
> + };
> +
> + /* Serial NAND is shared pin with SPI-NOR */
> + serial_nand_pins: serial-nand-pins {
> + mux {
> + function = "flash";
> + groups = "snfi";
> + };
> + };
> +
> + spic0_pins: spic0-pins {
> + mux {
> + function = "spi";
> + groups = "spic0_0";
> + };
> + };
> +
> + spic1_pins: spic1-pins {
> + mux {
> + function = "spi";
> + groups = "spic1_0";
> + };
> + };
> +
> + /* SPI-NOR is shared pin with serial NAND */
> + spi_nor_pins: spi-nor-pins {
> + mux {
> + function = "flash";
> + groups = "spi_nor";
> + };
> + };
> +
> + /* serial NAND is shared pin with SPI-NOR */
> + serial_nand_pins: serial-nand-pins {
> + mux {
> + function = "flash";
> + groups = "snfi";
> + };
> + };
> +
> + uart0_pins: uart0-pins {
> + mux {
> + function = "uart";
> + groups = "uart0_0_tx_rx" ;
> + };
> + };
> +
> + uart2_pins: uart2-pins {
> + mux {
> + function = "uart";
> + groups = "uart2_1_tx_rx" ;
> + };
> + };
> +
> + watchdog_pins: watchdog-pins {
> + mux {
> + function = "watchdog";
> + groups = "watchdog";
> + };
> + };
> +};
> +
> &uart0 {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> index 81207e6..8211bf7 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> @@ -147,6 +147,13 @@
> #clock-cells = <1>;
> };
>
> + pio: pinctrl@10211000 {
> + compatible = "mediatek,mt7622-pinctrl";
> + reg = <0 0x10211000 0 0x1000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> gic: interrupt-controller@10300000 {
> compatible = "arm,gic-400";
> interrupt-controller;
>
^ permalink raw reply [flat|nested] 85+ messages in thread* [PATCH v2 04/16] arm64: dts: mt7622: add pinctrl related device nodes
@ 2018-02-07 11:31 ` Matthias Brugger
0 siblings, 0 replies; 85+ messages in thread
From: Matthias Brugger @ 2018-02-07 11:31 UTC (permalink / raw)
To: linux-arm-kernel
On 02/06/2018 10:52 AM, sean.wang at mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
>
> add pinctrl device nodes and rfb1 board, additionally include all pin
> groups possible being used on rfb1 board and available gpio keys.
>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 200 +++++++++++++++++++++++++++
> arch/arm64/boot/dts/mediatek/mt7622.dtsi | 7 +
> 2 files changed, 207 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> index c08309d..bd1093a 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> @@ -7,6 +7,8 @@
> */
>
> /dts-v1/;
> +#include <dt-bindings/input/input.h>
> +
> #include "mt7622.dtsi"
>
> / {
> @@ -17,11 +19,209 @@
> bootargs = "console=ttyS0,115200n1";
> };
>
> + gpio-keys {
> + compatible = "gpio-keys-polled";
> + poll-interval = <100>;
> +
> + factory {
> + label = "factory";
> + linux,code = <BTN_0>;
> + gpios = <&pio 0 0>;
> + };
> +
> + wps {
> + label = "wps";
> + linux,code = <KEY_WPS_BUTTON>;
> + gpios = <&pio 102 0>;
> + };
> + };
> +
> memory {
> reg = <0 0x40000000 0 0x3F000000>;
> };
> };
>
> +&pio {
> + /* eMMC is shared pin with parallel NAND */
> + emmc_pins_default: emmc-pins-default {
> + mux {
> + function = "emmc", "emmc_rst";
> + groups = "emmc";
> + };
> + };
> +
> + emmc_pins_uhs: emmc-pins-uhs {
> + mux {
> + function = "emmc";
> + groups = "emmc";
> + };
> + };
> +
> + eth_pins: eth-pins {
> + mux {
> + function = "eth";
> + groups = "mdc_mdio", "rgmii_via_gmac2";
> + };
> + };
> +
> + i2c1_pins: i2c1-pins {
> + mux {
> + function = "i2c";
> + groups = "i2c1_0";
> + };
> + };
> +
> + i2c2_pins: i2c2-pins {
> + mux {
> + function = "i2c";
> + groups = "i2c2_0";
> + };
> + };
> +
> + i2s1_pins: i2s1-pins {
> + mux {
> + function = "i2s";
> + groups = "i2s_out_bclk_ws_mclk",
> + "i2s1_in_data",
> + "i2s1_out_data";
> + };
> + };
> +
> + irrx_pins: irrx-pins {
> + mux {
> + function = "ir";
> + groups = "ir_1_rx";
> + };
> + };
> +
> + irtx_pins: irtx-pins {
> + mux {
> + function = "ir";
> + groups = "ir_1_tx";
> + };
> + };
> +
> + /* Parallel nand is shared pin with eMMC */
> + parallel_nand_pins: parallel-nand-pins {
> + mux {
> + function = "flash";
> + groups = "par_nand";
> + };
> + };
> +
> + pcie0_pins: pcie0-pins {
> + mux {
> + groups = "pcie0_pad_perst",
> + "pcie0_1_waken",
> + "pcie0_1_clkreq";
> + function = "pcie";
> + };
> + };
> +
> + pcie1_pins: pcie1-pins {
> + mux {
> + groups = "pcie1_pad_perst",
> + "pcie1_0_waken",
> + "pcie1_0_clkreq";
> + function = "pcie";
> + };
> + };
> +
> + pmic_bus_pins: pmic-bus-pins {
> + mux {
> + groups = "pmic_bus";
> + function = "pmic";
> + };
> + };
Some bikeshedding here. Can you please add function before groups, so that it is
uniform through out the file?
Thanks,
Matthias
> +
> + pwm7_pins: pwm1-2-pins {
> + mux {
> + function = "pwm";
> + groups = "pwm_ch7_2";
> + };
> + };
> +
> + wled_pins: wled-pins {
> + mux {
> + function = "led";
> + groups = "wled";
> + };
> + };
> +
> + sd0_pins_default: sd0-pins-default {
> + mux {
> + function = "sd";
> + groups = "sd_0";
> + };
> + };
> +
> + sd0_pins_uhs: sd0-pins-uhs {
> + mux {
> + function = "sd";
> + groups = "sd_0";
> + };
> + };
> +
> + /* Serial NAND is shared pin with SPI-NOR */
> + serial_nand_pins: serial-nand-pins {
> + mux {
> + function = "flash";
> + groups = "snfi";
> + };
> + };
> +
> + spic0_pins: spic0-pins {
> + mux {
> + function = "spi";
> + groups = "spic0_0";
> + };
> + };
> +
> + spic1_pins: spic1-pins {
> + mux {
> + function = "spi";
> + groups = "spic1_0";
> + };
> + };
> +
> + /* SPI-NOR is shared pin with serial NAND */
> + spi_nor_pins: spi-nor-pins {
> + mux {
> + function = "flash";
> + groups = "spi_nor";
> + };
> + };
> +
> + /* serial NAND is shared pin with SPI-NOR */
> + serial_nand_pins: serial-nand-pins {
> + mux {
> + function = "flash";
> + groups = "snfi";
> + };
> + };
> +
> + uart0_pins: uart0-pins {
> + mux {
> + function = "uart";
> + groups = "uart0_0_tx_rx" ;
> + };
> + };
> +
> + uart2_pins: uart2-pins {
> + mux {
> + function = "uart";
> + groups = "uart2_1_tx_rx" ;
> + };
> + };
> +
> + watchdog_pins: watchdog-pins {
> + mux {
> + function = "watchdog";
> + groups = "watchdog";
> + };
> + };
> +};
> +
> &uart0 {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> index 81207e6..8211bf7 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> @@ -147,6 +147,13 @@
> #clock-cells = <1>;
> };
>
> + pio: pinctrl at 10211000 {
> + compatible = "mediatek,mt7622-pinctrl";
> + reg = <0 0x10211000 0 0x1000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> gic: interrupt-controller at 10300000 {
> compatible = "arm,gic-400";
> interrupt-controller;
>
^ permalink raw reply [flat|nested] 85+ messages in thread* Re: [PATCH v2 04/16] arm64: dts: mt7622: add pinctrl related device nodes
@ 2018-02-09 3:41 ` Sean Wang
0 siblings, 0 replies; 85+ messages in thread
From: Sean Wang @ 2018-02-09 3:41 UTC (permalink / raw)
To: Matthias Brugger
Cc: robh+dt, mark.rutland, devicetree, linux-mediatek,
linux-arm-kernel, linux-kernel
On Wed, 2018-02-07 at 12:31 +0100, Matthias Brugger wrote:
>
> On 02/06/2018 10:52 AM, sean.wang@mediatek.com wrote:
> > From: Sean Wang <sean.wang@mediatek.com>
> >
> > add pinctrl device nodes and rfb1 board, additionally include all pin
> > groups possible being used on rfb1 board and available gpio keys.
> >
> > Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> > ---
> > arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 200 +++++++++++++++++++++++++++
> > arch/arm64/boot/dts/mediatek/mt7622.dtsi | 7 +
> > 2 files changed, 207 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> > index c08309d..bd1093a 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> > +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> > @@ -7,6 +7,8 @@
> > */
> >
> > /dts-v1/;
> > +#include <dt-bindings/input/input.h>
> > +
> > #include "mt7622.dtsi"
> >
> > / {
> > @@ -17,11 +19,209 @@
> > bootargs = "console=ttyS0,115200n1";
> > };
> >
> > + gpio-keys {
> > + compatible = "gpio-keys-polled";
> > + poll-interval = <100>;
> > +
> > + factory {
> > + label = "factory";
> > + linux,code = <BTN_0>;
> > + gpios = <&pio 0 0>;
> > + };
> > +
> > + wps {
> > + label = "wps";
> > + linux,code = <KEY_WPS_BUTTON>;
> > + gpios = <&pio 102 0>;
> > + };
> > + };
> > +
> > memory {
> > reg = <0 0x40000000 0 0x3F000000>;
> > };
> > };
> >
> > +&pio {
> > + /* eMMC is shared pin with parallel NAND */
> > + emmc_pins_default: emmc-pins-default {
> > + mux {
> > + function = "emmc", "emmc_rst";
> > + groups = "emmc";
> > + };
> > + };
> > +
> > + emmc_pins_uhs: emmc-pins-uhs {
> > + mux {
> > + function = "emmc";
> > + groups = "emmc";
> > + };
> > + };
> > +
> > + eth_pins: eth-pins {
> > + mux {
> > + function = "eth";
> > + groups = "mdc_mdio", "rgmii_via_gmac2";
> > + };
> > + };
> > +
> > + i2c1_pins: i2c1-pins {
> > + mux {
> > + function = "i2c";
> > + groups = "i2c1_0";
> > + };
> > + };
> > +
> > + i2c2_pins: i2c2-pins {
> > + mux {
> > + function = "i2c";
> > + groups = "i2c2_0";
> > + };
> > + };
> > +
> > + i2s1_pins: i2s1-pins {
> > + mux {
> > + function = "i2s";
> > + groups = "i2s_out_bclk_ws_mclk",
> > + "i2s1_in_data",
> > + "i2s1_out_data";
> > + };
> > + };
> > +
> > + irrx_pins: irrx-pins {
> > + mux {
> > + function = "ir";
> > + groups = "ir_1_rx";
> > + };
> > + };
> > +
> > + irtx_pins: irtx-pins {
> > + mux {
> > + function = "ir";
> > + groups = "ir_1_tx";
> > + };
> > + };
> > +
> > + /* Parallel nand is shared pin with eMMC */
> > + parallel_nand_pins: parallel-nand-pins {
> > + mux {
> > + function = "flash";
> > + groups = "par_nand";
> > + };
> > + };
> > +
> > + pcie0_pins: pcie0-pins {
> > + mux {
> > + groups = "pcie0_pad_perst",
> > + "pcie0_1_waken",
> > + "pcie0_1_clkreq";
> > + function = "pcie";
> > + };
> > + };
> > +
> > + pcie1_pins: pcie1-pins {
> > + mux {
> > + groups = "pcie1_pad_perst",
> > + "pcie1_0_waken",
> > + "pcie1_0_clkreq";
> > + function = "pcie";
> > + };
> > + };
> > +
> > + pmic_bus_pins: pmic-bus-pins {
> > + mux {
> > + groups = "pmic_bus";
> > + function = "pmic";
> > + };
> > + };
>
> Some bikeshedding here. Can you please add function before groups, so that it is
> uniform through out the file?
>
> Thanks,
> Matthias
>
okay, will make them all aligned
> > +
> > + pwm7_pins: pwm1-2-pins {
> > + mux {
> > + function = "pwm";
> > + groups = "pwm_ch7_2";
> > + };
> > + };
> > +
> > + wled_pins: wled-pins {
> > + mux {
> > + function = "led";
> > + groups = "wled";
> > + };
> > + };
> > +
> > + sd0_pins_default: sd0-pins-default {
> > + mux {
> > + function = "sd";
> > + groups = "sd_0";
> > + };
> > + };
> > +
> > + sd0_pins_uhs: sd0-pins-uhs {
> > + mux {
> > + function = "sd";
> > + groups = "sd_0";
> > + };
> > + };
> > +
> > + /* Serial NAND is shared pin with SPI-NOR */
> > + serial_nand_pins: serial-nand-pins {
> > + mux {
> > + function = "flash";
> > + groups = "snfi";
> > + };
> > + };
> > +
> > + spic0_pins: spic0-pins {
> > + mux {
> > + function = "spi";
> > + groups = "spic0_0";
> > + };
> > + };
> > +
> > + spic1_pins: spic1-pins {
> > + mux {
> > + function = "spi";
> > + groups = "spic1_0";
> > + };
> > + };
> > +
> > + /* SPI-NOR is shared pin with serial NAND */
> > + spi_nor_pins: spi-nor-pins {
> > + mux {
> > + function = "flash";
> > + groups = "spi_nor";
> > + };
> > + };
> > +
> > + /* serial NAND is shared pin with SPI-NOR */
> > + serial_nand_pins: serial-nand-pins {
> > + mux {
> > + function = "flash";
> > + groups = "snfi";
> > + };
> > + };
> > +
> > + uart0_pins: uart0-pins {
> > + mux {
> > + function = "uart";
> > + groups = "uart0_0_tx_rx" ;
> > + };
> > + };
> > +
> > + uart2_pins: uart2-pins {
> > + mux {
> > + function = "uart";
> > + groups = "uart2_1_tx_rx" ;
> > + };
> > + };
> > +
> > + watchdog_pins: watchdog-pins {
> > + mux {
> > + function = "watchdog";
> > + groups = "watchdog";
> > + };
> > + };
> > +};
> > +
> > &uart0 {
> > status = "okay";
> > };
> > diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > index 81207e6..8211bf7 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > @@ -147,6 +147,13 @@
> > #clock-cells = <1>;
> > };
> >
> > + pio: pinctrl@10211000 {
> > + compatible = "mediatek,mt7622-pinctrl";
> > + reg = <0 0x10211000 0 0x1000>;
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + };
> > +
> > gic: interrupt-controller@10300000 {
> > compatible = "arm,gic-400";
> > interrupt-controller;
> >
>
^ permalink raw reply [flat|nested] 85+ messages in thread* [PATCH v2 04/16] arm64: dts: mt7622: add pinctrl related device nodes
@ 2018-02-09 3:41 ` Sean Wang
0 siblings, 0 replies; 85+ messages in thread
From: Sean Wang @ 2018-02-09 3:41 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 2018-02-07 at 12:31 +0100, Matthias Brugger wrote:
>
> On 02/06/2018 10:52 AM, sean.wang at mediatek.com wrote:
> > From: Sean Wang <sean.wang@mediatek.com>
> >
> > add pinctrl device nodes and rfb1 board, additionally include all pin
> > groups possible being used on rfb1 board and available gpio keys.
> >
> > Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> > ---
> > arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 200 +++++++++++++++++++++++++++
> > arch/arm64/boot/dts/mediatek/mt7622.dtsi | 7 +
> > 2 files changed, 207 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> > index c08309d..bd1093a 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> > +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> > @@ -7,6 +7,8 @@
> > */
> >
> > /dts-v1/;
> > +#include <dt-bindings/input/input.h>
> > +
> > #include "mt7622.dtsi"
> >
> > / {
> > @@ -17,11 +19,209 @@
> > bootargs = "console=ttyS0,115200n1";
> > };
> >
> > + gpio-keys {
> > + compatible = "gpio-keys-polled";
> > + poll-interval = <100>;
> > +
> > + factory {
> > + label = "factory";
> > + linux,code = <BTN_0>;
> > + gpios = <&pio 0 0>;
> > + };
> > +
> > + wps {
> > + label = "wps";
> > + linux,code = <KEY_WPS_BUTTON>;
> > + gpios = <&pio 102 0>;
> > + };
> > + };
> > +
> > memory {
> > reg = <0 0x40000000 0 0x3F000000>;
> > };
> > };
> >
> > +&pio {
> > + /* eMMC is shared pin with parallel NAND */
> > + emmc_pins_default: emmc-pins-default {
> > + mux {
> > + function = "emmc", "emmc_rst";
> > + groups = "emmc";
> > + };
> > + };
> > +
> > + emmc_pins_uhs: emmc-pins-uhs {
> > + mux {
> > + function = "emmc";
> > + groups = "emmc";
> > + };
> > + };
> > +
> > + eth_pins: eth-pins {
> > + mux {
> > + function = "eth";
> > + groups = "mdc_mdio", "rgmii_via_gmac2";
> > + };
> > + };
> > +
> > + i2c1_pins: i2c1-pins {
> > + mux {
> > + function = "i2c";
> > + groups = "i2c1_0";
> > + };
> > + };
> > +
> > + i2c2_pins: i2c2-pins {
> > + mux {
> > + function = "i2c";
> > + groups = "i2c2_0";
> > + };
> > + };
> > +
> > + i2s1_pins: i2s1-pins {
> > + mux {
> > + function = "i2s";
> > + groups = "i2s_out_bclk_ws_mclk",
> > + "i2s1_in_data",
> > + "i2s1_out_data";
> > + };
> > + };
> > +
> > + irrx_pins: irrx-pins {
> > + mux {
> > + function = "ir";
> > + groups = "ir_1_rx";
> > + };
> > + };
> > +
> > + irtx_pins: irtx-pins {
> > + mux {
> > + function = "ir";
> > + groups = "ir_1_tx";
> > + };
> > + };
> > +
> > + /* Parallel nand is shared pin with eMMC */
> > + parallel_nand_pins: parallel-nand-pins {
> > + mux {
> > + function = "flash";
> > + groups = "par_nand";
> > + };
> > + };
> > +
> > + pcie0_pins: pcie0-pins {
> > + mux {
> > + groups = "pcie0_pad_perst",
> > + "pcie0_1_waken",
> > + "pcie0_1_clkreq";
> > + function = "pcie";
> > + };
> > + };
> > +
> > + pcie1_pins: pcie1-pins {
> > + mux {
> > + groups = "pcie1_pad_perst",
> > + "pcie1_0_waken",
> > + "pcie1_0_clkreq";
> > + function = "pcie";
> > + };
> > + };
> > +
> > + pmic_bus_pins: pmic-bus-pins {
> > + mux {
> > + groups = "pmic_bus";
> > + function = "pmic";
> > + };
> > + };
>
> Some bikeshedding here. Can you please add function before groups, so that it is
> uniform through out the file?
>
> Thanks,
> Matthias
>
okay, will make them all aligned
> > +
> > + pwm7_pins: pwm1-2-pins {
> > + mux {
> > + function = "pwm";
> > + groups = "pwm_ch7_2";
> > + };
> > + };
> > +
> > + wled_pins: wled-pins {
> > + mux {
> > + function = "led";
> > + groups = "wled";
> > + };
> > + };
> > +
> > + sd0_pins_default: sd0-pins-default {
> > + mux {
> > + function = "sd";
> > + groups = "sd_0";
> > + };
> > + };
> > +
> > + sd0_pins_uhs: sd0-pins-uhs {
> > + mux {
> > + function = "sd";
> > + groups = "sd_0";
> > + };
> > + };
> > +
> > + /* Serial NAND is shared pin with SPI-NOR */
> > + serial_nand_pins: serial-nand-pins {
> > + mux {
> > + function = "flash";
> > + groups = "snfi";
> > + };
> > + };
> > +
> > + spic0_pins: spic0-pins {
> > + mux {
> > + function = "spi";
> > + groups = "spic0_0";
> > + };
> > + };
> > +
> > + spic1_pins: spic1-pins {
> > + mux {
> > + function = "spi";
> > + groups = "spic1_0";
> > + };
> > + };
> > +
> > + /* SPI-NOR is shared pin with serial NAND */
> > + spi_nor_pins: spi-nor-pins {
> > + mux {
> > + function = "flash";
> > + groups = "spi_nor";
> > + };
> > + };
> > +
> > + /* serial NAND is shared pin with SPI-NOR */
> > + serial_nand_pins: serial-nand-pins {
> > + mux {
> > + function = "flash";
> > + groups = "snfi";
> > + };
> > + };
> > +
> > + uart0_pins: uart0-pins {
> > + mux {
> > + function = "uart";
> > + groups = "uart0_0_tx_rx" ;
> > + };
> > + };
> > +
> > + uart2_pins: uart2-pins {
> > + mux {
> > + function = "uart";
> > + groups = "uart2_1_tx_rx" ;
> > + };
> > + };
> > +
> > + watchdog_pins: watchdog-pins {
> > + mux {
> > + function = "watchdog";
> > + groups = "watchdog";
> > + };
> > + };
> > +};
> > +
> > &uart0 {
> > status = "okay";
> > };
> > diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > index 81207e6..8211bf7 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > @@ -147,6 +147,13 @@
> > #clock-cells = <1>;
> > };
> >
> > + pio: pinctrl at 10211000 {
> > + compatible = "mediatek,mt7622-pinctrl";
> > + reg = <0 0x10211000 0 0x1000>;
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + };
> > +
> > gic: interrupt-controller at 10300000 {
> > compatible = "arm,gic-400";
> > interrupt-controller;
> >
>
^ permalink raw reply [flat|nested] 85+ messages in thread* Re: [PATCH v2 04/16] arm64: dts: mt7622: add pinctrl related device nodes
@ 2018-02-09 3:41 ` Sean Wang
0 siblings, 0 replies; 85+ messages in thread
From: Sean Wang @ 2018-02-09 3:41 UTC (permalink / raw)
To: Matthias Brugger
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
On Wed, 2018-02-07 at 12:31 +0100, Matthias Brugger wrote:
>
> On 02/06/2018 10:52 AM, sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org wrote:
> > From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> >
> > add pinctrl device nodes and rfb1 board, additionally include all pin
> > groups possible being used on rfb1 board and available gpio keys.
> >
> > Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> > ---
> > arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 200 +++++++++++++++++++++++++++
> > arch/arm64/boot/dts/mediatek/mt7622.dtsi | 7 +
> > 2 files changed, 207 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> > index c08309d..bd1093a 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> > +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> > @@ -7,6 +7,8 @@
> > */
> >
> > /dts-v1/;
> > +#include <dt-bindings/input/input.h>
> > +
> > #include "mt7622.dtsi"
> >
> > / {
> > @@ -17,11 +19,209 @@
> > bootargs = "console=ttyS0,115200n1";
> > };
> >
> > + gpio-keys {
> > + compatible = "gpio-keys-polled";
> > + poll-interval = <100>;
> > +
> > + factory {
> > + label = "factory";
> > + linux,code = <BTN_0>;
> > + gpios = <&pio 0 0>;
> > + };
> > +
> > + wps {
> > + label = "wps";
> > + linux,code = <KEY_WPS_BUTTON>;
> > + gpios = <&pio 102 0>;
> > + };
> > + };
> > +
> > memory {
> > reg = <0 0x40000000 0 0x3F000000>;
> > };
> > };
> >
> > +&pio {
> > + /* eMMC is shared pin with parallel NAND */
> > + emmc_pins_default: emmc-pins-default {
> > + mux {
> > + function = "emmc", "emmc_rst";
> > + groups = "emmc";
> > + };
> > + };
> > +
> > + emmc_pins_uhs: emmc-pins-uhs {
> > + mux {
> > + function = "emmc";
> > + groups = "emmc";
> > + };
> > + };
> > +
> > + eth_pins: eth-pins {
> > + mux {
> > + function = "eth";
> > + groups = "mdc_mdio", "rgmii_via_gmac2";
> > + };
> > + };
> > +
> > + i2c1_pins: i2c1-pins {
> > + mux {
> > + function = "i2c";
> > + groups = "i2c1_0";
> > + };
> > + };
> > +
> > + i2c2_pins: i2c2-pins {
> > + mux {
> > + function = "i2c";
> > + groups = "i2c2_0";
> > + };
> > + };
> > +
> > + i2s1_pins: i2s1-pins {
> > + mux {
> > + function = "i2s";
> > + groups = "i2s_out_bclk_ws_mclk",
> > + "i2s1_in_data",
> > + "i2s1_out_data";
> > + };
> > + };
> > +
> > + irrx_pins: irrx-pins {
> > + mux {
> > + function = "ir";
> > + groups = "ir_1_rx";
> > + };
> > + };
> > +
> > + irtx_pins: irtx-pins {
> > + mux {
> > + function = "ir";
> > + groups = "ir_1_tx";
> > + };
> > + };
> > +
> > + /* Parallel nand is shared pin with eMMC */
> > + parallel_nand_pins: parallel-nand-pins {
> > + mux {
> > + function = "flash";
> > + groups = "par_nand";
> > + };
> > + };
> > +
> > + pcie0_pins: pcie0-pins {
> > + mux {
> > + groups = "pcie0_pad_perst",
> > + "pcie0_1_waken",
> > + "pcie0_1_clkreq";
> > + function = "pcie";
> > + };
> > + };
> > +
> > + pcie1_pins: pcie1-pins {
> > + mux {
> > + groups = "pcie1_pad_perst",
> > + "pcie1_0_waken",
> > + "pcie1_0_clkreq";
> > + function = "pcie";
> > + };
> > + };
> > +
> > + pmic_bus_pins: pmic-bus-pins {
> > + mux {
> > + groups = "pmic_bus";
> > + function = "pmic";
> > + };
> > + };
>
> Some bikeshedding here. Can you please add function before groups, so that it is
> uniform through out the file?
>
> Thanks,
> Matthias
>
okay, will make them all aligned
> > +
> > + pwm7_pins: pwm1-2-pins {
> > + mux {
> > + function = "pwm";
> > + groups = "pwm_ch7_2";
> > + };
> > + };
> > +
> > + wled_pins: wled-pins {
> > + mux {
> > + function = "led";
> > + groups = "wled";
> > + };
> > + };
> > +
> > + sd0_pins_default: sd0-pins-default {
> > + mux {
> > + function = "sd";
> > + groups = "sd_0";
> > + };
> > + };
> > +
> > + sd0_pins_uhs: sd0-pins-uhs {
> > + mux {
> > + function = "sd";
> > + groups = "sd_0";
> > + };
> > + };
> > +
> > + /* Serial NAND is shared pin with SPI-NOR */
> > + serial_nand_pins: serial-nand-pins {
> > + mux {
> > + function = "flash";
> > + groups = "snfi";
> > + };
> > + };
> > +
> > + spic0_pins: spic0-pins {
> > + mux {
> > + function = "spi";
> > + groups = "spic0_0";
> > + };
> > + };
> > +
> > + spic1_pins: spic1-pins {
> > + mux {
> > + function = "spi";
> > + groups = "spic1_0";
> > + };
> > + };
> > +
> > + /* SPI-NOR is shared pin with serial NAND */
> > + spi_nor_pins: spi-nor-pins {
> > + mux {
> > + function = "flash";
> > + groups = "spi_nor";
> > + };
> > + };
> > +
> > + /* serial NAND is shared pin with SPI-NOR */
> > + serial_nand_pins: serial-nand-pins {
> > + mux {
> > + function = "flash";
> > + groups = "snfi";
> > + };
> > + };
> > +
> > + uart0_pins: uart0-pins {
> > + mux {
> > + function = "uart";
> > + groups = "uart0_0_tx_rx" ;
> > + };
> > + };
> > +
> > + uart2_pins: uart2-pins {
> > + mux {
> > + function = "uart";
> > + groups = "uart2_1_tx_rx" ;
> > + };
> > + };
> > +
> > + watchdog_pins: watchdog-pins {
> > + mux {
> > + function = "watchdog";
> > + groups = "watchdog";
> > + };
> > + };
> > +};
> > +
> > &uart0 {
> > status = "okay";
> > };
> > diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > index 81207e6..8211bf7 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > @@ -147,6 +147,13 @@
> > #clock-cells = <1>;
> > };
> >
> > + pio: pinctrl@10211000 {
> > + compatible = "mediatek,mt7622-pinctrl";
> > + reg = <0 0x10211000 0 0x1000>;
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + };
> > +
> > gic: interrupt-controller@10300000 {
> > compatible = "arm,gic-400";
> > interrupt-controller;
> >
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 85+ messages in thread
* [PATCH v2 05/16] arm64: dts: mt7622: add PMIC MT6380 related nodes
@ 2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang @ 2018-02-06 9:52 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel, Sean Wang, Mark Brown,
Philippe Ombredanne
From: Sean Wang <sean.wang@mediatek.com>
Enable pwrap and MT6380 on mt7622-rfb1 board. Also add all mt6380
regulator nodes in an alone file to allow similar boards using MT6380
able to resue the configuration.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
---
arch/arm64/boot/dts/mediatek/mt6380.dtsi | 86 ++++++++++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 8 +++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 12 ++++
3 files changed, 106 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt6380.dtsi
diff --git a/arch/arm64/boot/dts/mediatek/mt6380.dtsi b/arch/arm64/boot/dts/mediatek/mt6380.dtsi
new file mode 100644
index 0000000..53b335d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6380.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for MediaTek MT6380 regulator
+ *
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Chenglin Xu <chenglin.xu@mediatek.com>
+ * Sean Wang <sean.wang@mediatek.com>
+ */
+
+&pwrap {
+ regulators {
+ compatible = "mediatek,mt6380-regulator";
+
+ mt6380_vcpu_reg: buck-vcore1 {
+ regulator-name = "vcore1";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1393750>;
+ regulator-ramp-delay = <6250>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6380_vcore_reg: buck-vcore {
+ regulator-name = "vcore";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1393750>;
+ regulator-ramp-delay = <6250>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6380_vrf_reg: buck-vrf {
+ regulator-name = "vrf";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1575000>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6380_vm_reg: ldo-vm {
+ regulator-name = "vm";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6380_va_reg: ldo-va {
+ regulator-name = "va";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6380_vphy_reg: ldo-vphy {
+ regulator-name = "vphy";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6380_vddr_reg: ldo-vddr {
+ regulator-name = "vddr";
+ regulator-min-microvolt = <1240000>;
+ regulator-max-microvolt = <1840000>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6380_vt_reg: ldo-vt {
+ regulator-name = "vt";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index bd1093a..4615af6 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -10,6 +10,7 @@
#include <dt-bindings/input/input.h>
#include "mt7622.dtsi"
+#include "mt6380.dtsi"
/ {
model = "MediaTek MT7622 RFB1 board";
@@ -222,6 +223,13 @@
};
};
+&pwrap {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_bus_pins>;
+
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 8211bf7..c387c4c 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -102,6 +102,18 @@
#reset-cells = <1>;
};
+ pwrap: pwrap@10001000 {
+ compatible = "mediatek,mt7622-pwrap";
+ reg = <0 0x10001000 0 0x250>;
+ reg-names = "pwrap";
+ clocks = <&infracfg CLK_INFRA_PMIC_PD>,<&pwrap_clk>;
+ clock-names = "spi","wrap";
+ resets = <&infracfg MT7622_INFRA_PMIC_WRAP_RST>;
+ reset-names = "pwrap";
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
pericfg: pericfg@10002000 {
compatible = "mediatek,mt7622-pericfg",
"syscon";
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 05/16] arm64: dts: mt7622: add PMIC MT6380 related nodes
@ 2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang at mediatek.com @ 2018-02-06 9:52 UTC (permalink / raw)
To: linux-arm-kernel
From: Sean Wang <sean.wang@mediatek.com>
Enable pwrap and MT6380 on mt7622-rfb1 board. Also add all mt6380
regulator nodes in an alone file to allow similar boards using MT6380
able to resue the configuration.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
---
arch/arm64/boot/dts/mediatek/mt6380.dtsi | 86 ++++++++++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 8 +++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 12 ++++
3 files changed, 106 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt6380.dtsi
diff --git a/arch/arm64/boot/dts/mediatek/mt6380.dtsi b/arch/arm64/boot/dts/mediatek/mt6380.dtsi
new file mode 100644
index 0000000..53b335d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6380.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for MediaTek MT6380 regulator
+ *
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Chenglin Xu <chenglin.xu@mediatek.com>
+ * Sean Wang <sean.wang@mediatek.com>
+ */
+
+&pwrap {
+ regulators {
+ compatible = "mediatek,mt6380-regulator";
+
+ mt6380_vcpu_reg: buck-vcore1 {
+ regulator-name = "vcore1";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1393750>;
+ regulator-ramp-delay = <6250>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6380_vcore_reg: buck-vcore {
+ regulator-name = "vcore";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1393750>;
+ regulator-ramp-delay = <6250>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6380_vrf_reg: buck-vrf {
+ regulator-name = "vrf";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1575000>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6380_vm_reg: ldo-vm {
+ regulator-name = "vm";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6380_va_reg: ldo-va {
+ regulator-name = "va";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6380_vphy_reg: ldo-vphy {
+ regulator-name = "vphy";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6380_vddr_reg: ldo-vddr {
+ regulator-name = "vddr";
+ regulator-min-microvolt = <1240000>;
+ regulator-max-microvolt = <1840000>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6380_vt_reg: ldo-vt {
+ regulator-name = "vt";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index bd1093a..4615af6 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -10,6 +10,7 @@
#include <dt-bindings/input/input.h>
#include "mt7622.dtsi"
+#include "mt6380.dtsi"
/ {
model = "MediaTek MT7622 RFB1 board";
@@ -222,6 +223,13 @@
};
};
+&pwrap {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_bus_pins>;
+
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 8211bf7..c387c4c 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -102,6 +102,18 @@
#reset-cells = <1>;
};
+ pwrap: pwrap at 10001000 {
+ compatible = "mediatek,mt7622-pwrap";
+ reg = <0 0x10001000 0 0x250>;
+ reg-names = "pwrap";
+ clocks = <&infracfg CLK_INFRA_PMIC_PD>,<&pwrap_clk>;
+ clock-names = "spi","wrap";
+ resets = <&infracfg MT7622_INFRA_PMIC_WRAP_RST>;
+ reset-names = "pwrap";
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
pericfg: pericfg at 10002000 {
compatible = "mediatek,mt7622-pericfg",
"syscon";
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 05/16] arm64: dts: mt7622: add PMIC MT6380 related nodes
@ 2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2018-02-06 9:52 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Mark Brown, Sean Wang, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Philippe Ombredanne
From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Enable pwrap and MT6380 on mt7622-rfb1 board. Also add all mt6380
regulator nodes in an alone file to allow similar boards using MT6380
able to resue the configuration.
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Cc: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Matthias Brugger <matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Philippe Ombredanne <pombredanne-od1rfyK75/E@public.gmane.org>
---
arch/arm64/boot/dts/mediatek/mt6380.dtsi | 86 ++++++++++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 8 +++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 12 ++++
3 files changed, 106 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt6380.dtsi
diff --git a/arch/arm64/boot/dts/mediatek/mt6380.dtsi b/arch/arm64/boot/dts/mediatek/mt6380.dtsi
new file mode 100644
index 0000000..53b335d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6380.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for MediaTek MT6380 regulator
+ *
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Chenglin Xu <chenglin.xu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+ * Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+ */
+
+&pwrap {
+ regulators {
+ compatible = "mediatek,mt6380-regulator";
+
+ mt6380_vcpu_reg: buck-vcore1 {
+ regulator-name = "vcore1";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1393750>;
+ regulator-ramp-delay = <6250>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6380_vcore_reg: buck-vcore {
+ regulator-name = "vcore";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1393750>;
+ regulator-ramp-delay = <6250>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6380_vrf_reg: buck-vrf {
+ regulator-name = "vrf";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1575000>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6380_vm_reg: ldo-vm {
+ regulator-name = "vm";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6380_va_reg: ldo-va {
+ regulator-name = "va";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6380_vphy_reg: ldo-vphy {
+ regulator-name = "vphy";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6380_vddr_reg: ldo-vddr {
+ regulator-name = "vddr";
+ regulator-min-microvolt = <1240000>;
+ regulator-max-microvolt = <1840000>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6380_vt_reg: ldo-vt {
+ regulator-name = "vt";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index bd1093a..4615af6 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -10,6 +10,7 @@
#include <dt-bindings/input/input.h>
#include "mt7622.dtsi"
+#include "mt6380.dtsi"
/ {
model = "MediaTek MT7622 RFB1 board";
@@ -222,6 +223,13 @@
};
};
+&pwrap {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_bus_pins>;
+
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 8211bf7..c387c4c 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -102,6 +102,18 @@
#reset-cells = <1>;
};
+ pwrap: pwrap@10001000 {
+ compatible = "mediatek,mt7622-pwrap";
+ reg = <0 0x10001000 0 0x250>;
+ reg-names = "pwrap";
+ clocks = <&infracfg CLK_INFRA_PMIC_PD>,<&pwrap_clk>;
+ clock-names = "spi","wrap";
+ resets = <&infracfg MT7622_INFRA_PMIC_WRAP_RST>;
+ reset-names = "pwrap";
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
pericfg: pericfg@10002000 {
compatible = "mediatek,mt7622-pericfg",
"syscon";
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* Re: [PATCH v2 05/16] arm64: dts: mt7622: add PMIC MT6380 related nodes
@ 2018-02-08 14:46 ` Philippe Ombredanne
0 siblings, 0 replies; 85+ messages in thread
From: Philippe Ombredanne @ 2018-02-08 14:46 UTC (permalink / raw)
To: Sean Wang
Cc: Rob Herring, Matthias Brugger, Mark Rutland,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-mediatek,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE, LKML,
Mark Brown
Sean,
On Tue, Feb 6, 2018 at 10:52 AM, <sean.wang@mediatek.com> wrote:
> From: Sean Wang <sean.wang@mediatek.com>
>
> Enable pwrap and MT6380 on mt7622-rfb1 board. Also add all mt6380
> regulator nodes in an alone file to allow similar boards using MT6380
> able to resue the configuration.
>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Matthias Brugger <matthias.bgg@gmail.com>
> Cc: Philippe Ombredanne <pombredanne@nexb.com>
Thank you for the use of SPDX licenses ids!
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
^ permalink raw reply [flat|nested] 85+ messages in thread
* [PATCH v2 05/16] arm64: dts: mt7622: add PMIC MT6380 related nodes
@ 2018-02-08 14:46 ` Philippe Ombredanne
0 siblings, 0 replies; 85+ messages in thread
From: Philippe Ombredanne @ 2018-02-08 14:46 UTC (permalink / raw)
To: linux-arm-kernel
Sean,
On Tue, Feb 6, 2018 at 10:52 AM, <sean.wang@mediatek.com> wrote:
> From: Sean Wang <sean.wang@mediatek.com>
>
> Enable pwrap and MT6380 on mt7622-rfb1 board. Also add all mt6380
> regulator nodes in an alone file to allow similar boards using MT6380
> able to resue the configuration.
>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Matthias Brugger <matthias.bgg@gmail.com>
> Cc: Philippe Ombredanne <pombredanne@nexb.com>
Thank you for the use of SPDX licenses ids!
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
^ permalink raw reply [flat|nested] 85+ messages in thread
* Re: [PATCH v2 05/16] arm64: dts: mt7622: add PMIC MT6380 related nodes
@ 2018-02-08 14:46 ` Philippe Ombredanne
0 siblings, 0 replies; 85+ messages in thread
From: Philippe Ombredanne @ 2018-02-08 14:46 UTC (permalink / raw)
To: Sean Wang
Cc: Rob Herring, Matthias Brugger, Mark Rutland,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE, LKML,
Mark Brown
Sean,
On Tue, Feb 6, 2018 at 10:52 AM, <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> wrote:
> From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
>
> Enable pwrap and MT6380 on mt7622-rfb1 board. Also add all mt6380
> regulator nodes in an alone file to allow similar boards using MT6380
> able to resue the configuration.
>
> Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> Cc: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Matthias Brugger <matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Cc: Philippe Ombredanne <pombredanne-od1rfyK75/E@public.gmane.org>
Thank you for the use of SPDX licenses ids!
Acked-by: Philippe Ombredanne <pombredanne-od1rfyK75/E@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 85+ messages in thread
* [PATCH v2 06/16] arm64: dts: mt7622: add cpufreq related device nodes
@ 2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang @ 2018-02-06 9:52 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel, Sean Wang, Viresh Kumar
From: Sean Wang <sean.wang@mediatek.com>
Add clocks, regulators and opp information into cpu nodes.
In addition, the power supply for cpu nodes is deployed on
mt7622-rfb1 board.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 12 +++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 49 ++++++++++++++++++++++++++++
2 files changed, 61 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 4615af6..bbf4d03 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -20,6 +20,18 @@
bootargs = "console=ttyS0,115200n1";
};
+ cpus {
+ cpu@0 {
+ proc-supply = <&mt6380_vcpu_reg>;
+ sram-supply = <&mt6380_vm_reg>;
+ };
+
+ cpu@1 {
+ proc-supply = <&mt6380_vcpu_reg>;
+ sram-supply = <&mt6380_vm_reg>;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index c387c4c..65eb417 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -18,6 +18,50 @@
#address-cells = <2>;
#size-cells = <2>;
+ cpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+ opp-300000000 {
+ opp-hz = /bits/ 64 <30000000>;
+ opp-microvolt = <950000>;
+ };
+
+ opp-437500000 {
+ opp-hz = /bits/ 64 <437500000>;
+ opp-microvolt = <1000000>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-812500000 {
+ opp-hz = /bits/ 64 <812500000>;
+ opp-microvolt = <1100000>;
+ };
+
+ opp-1025000000 {
+ opp-hz = /bits/ 64 <1025000000>;
+ opp-microvolt = <1150000>;
+ };
+
+ opp-1137500000 {
+ opp-hz = /bits/ 64 <1137500000>;
+ opp-microvolt = <1200000>;
+ };
+
+ opp-1262500000 {
+ opp-hz = /bits/ 64 <1262500000>;
+ opp-microvolt = <1250000>;
+ };
+
+ opp-1350000000 {
+ opp-hz = /bits/ 64 <1350000000>;
+ opp-microvolt = <1310000>;
+ };
+ };
+
cpus {
#address-cells = <2>;
#size-cells = <0>;
@@ -26,6 +70,10 @@
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x0>;
+ clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
+ <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cpu_opp_table>;
enable-method = "psci";
clock-frequency = <1300000000>;
};
@@ -34,6 +82,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x1>;
+ operating-points-v2 = <&cpu_opp_table>;
enable-method = "psci";
clock-frequency = <1300000000>;
};
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 06/16] arm64: dts: mt7622: add cpufreq related device nodes
@ 2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang at mediatek.com @ 2018-02-06 9:52 UTC (permalink / raw)
To: linux-arm-kernel
From: Sean Wang <sean.wang@mediatek.com>
Add clocks, regulators and opp information into cpu nodes.
In addition, the power supply for cpu nodes is deployed on
mt7622-rfb1 board.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 12 +++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 49 ++++++++++++++++++++++++++++
2 files changed, 61 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 4615af6..bbf4d03 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -20,6 +20,18 @@
bootargs = "console=ttyS0,115200n1";
};
+ cpus {
+ cpu at 0 {
+ proc-supply = <&mt6380_vcpu_reg>;
+ sram-supply = <&mt6380_vm_reg>;
+ };
+
+ cpu at 1 {
+ proc-supply = <&mt6380_vcpu_reg>;
+ sram-supply = <&mt6380_vm_reg>;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index c387c4c..65eb417 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -18,6 +18,50 @@
#address-cells = <2>;
#size-cells = <2>;
+ cpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+ opp-300000000 {
+ opp-hz = /bits/ 64 <30000000>;
+ opp-microvolt = <950000>;
+ };
+
+ opp-437500000 {
+ opp-hz = /bits/ 64 <437500000>;
+ opp-microvolt = <1000000>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-812500000 {
+ opp-hz = /bits/ 64 <812500000>;
+ opp-microvolt = <1100000>;
+ };
+
+ opp-1025000000 {
+ opp-hz = /bits/ 64 <1025000000>;
+ opp-microvolt = <1150000>;
+ };
+
+ opp-1137500000 {
+ opp-hz = /bits/ 64 <1137500000>;
+ opp-microvolt = <1200000>;
+ };
+
+ opp-1262500000 {
+ opp-hz = /bits/ 64 <1262500000>;
+ opp-microvolt = <1250000>;
+ };
+
+ opp-1350000000 {
+ opp-hz = /bits/ 64 <1350000000>;
+ opp-microvolt = <1310000>;
+ };
+ };
+
cpus {
#address-cells = <2>;
#size-cells = <0>;
@@ -26,6 +70,10 @@
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x0>;
+ clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
+ <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cpu_opp_table>;
enable-method = "psci";
clock-frequency = <1300000000>;
};
@@ -34,6 +82,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x1>;
+ operating-points-v2 = <&cpu_opp_table>;
enable-method = "psci";
clock-frequency = <1300000000>;
};
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 06/16] arm64: dts: mt7622: add cpufreq related device nodes
@ 2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2018-02-06 9:52 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Viresh Kumar, Sean Wang, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Add clocks, regulators and opp information into cpu nodes.
In addition, the power supply for cpu nodes is deployed on
mt7622-rfb1 board.
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Cc: Viresh Kumar <viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 12 +++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 49 ++++++++++++++++++++++++++++
2 files changed, 61 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 4615af6..bbf4d03 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -20,6 +20,18 @@
bootargs = "console=ttyS0,115200n1";
};
+ cpus {
+ cpu@0 {
+ proc-supply = <&mt6380_vcpu_reg>;
+ sram-supply = <&mt6380_vm_reg>;
+ };
+
+ cpu@1 {
+ proc-supply = <&mt6380_vcpu_reg>;
+ sram-supply = <&mt6380_vm_reg>;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index c387c4c..65eb417 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -18,6 +18,50 @@
#address-cells = <2>;
#size-cells = <2>;
+ cpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+ opp-300000000 {
+ opp-hz = /bits/ 64 <30000000>;
+ opp-microvolt = <950000>;
+ };
+
+ opp-437500000 {
+ opp-hz = /bits/ 64 <437500000>;
+ opp-microvolt = <1000000>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1050000>;
+ };
+
+ opp-812500000 {
+ opp-hz = /bits/ 64 <812500000>;
+ opp-microvolt = <1100000>;
+ };
+
+ opp-1025000000 {
+ opp-hz = /bits/ 64 <1025000000>;
+ opp-microvolt = <1150000>;
+ };
+
+ opp-1137500000 {
+ opp-hz = /bits/ 64 <1137500000>;
+ opp-microvolt = <1200000>;
+ };
+
+ opp-1262500000 {
+ opp-hz = /bits/ 64 <1262500000>;
+ opp-microvolt = <1250000>;
+ };
+
+ opp-1350000000 {
+ opp-hz = /bits/ 64 <1350000000>;
+ opp-microvolt = <1310000>;
+ };
+ };
+
cpus {
#address-cells = <2>;
#size-cells = <0>;
@@ -26,6 +70,10 @@
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x0>;
+ clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
+ <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
+ clock-names = "cpu", "intermediate";
+ operating-points-v2 = <&cpu_opp_table>;
enable-method = "psci";
clock-frequency = <1300000000>;
};
@@ -34,6 +82,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x1>;
+ operating-points-v2 = <&cpu_opp_table>;
enable-method = "psci";
clock-frequency = <1300000000>;
};
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* Re: [PATCH v2 06/16] arm64: dts: mt7622: add cpufreq related device nodes
@ 2018-02-07 3:33 ` Viresh Kumar
0 siblings, 0 replies; 85+ messages in thread
From: Viresh Kumar @ 2018-02-07 3:33 UTC (permalink / raw)
To: sean.wang
Cc: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek,
linux-arm-kernel, linux-kernel
On 06-02-18, 17:52, sean.wang@mediatek.com wrote:
> cpus {
> #address-cells = <2>;
> #size-cells = <0>;
> @@ -26,6 +70,10 @@
> device_type = "cpu";
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x0>;
> + clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
> + <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
> + clock-names = "cpu", "intermediate";
> + operating-points-v2 = <&cpu_opp_table>;
> enable-method = "psci";
> clock-frequency = <1300000000>;
> };
> @@ -34,6 +82,7 @@
> device_type = "cpu";
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x1>;
> + operating-points-v2 = <&cpu_opp_table>;
> enable-method = "psci";
> clock-frequency = <1300000000>;
> };
Sorry for not picking this earlier, but you should probably add the same clock
related properties for both cpu nodes here. Things will break if CPU1 is used by
the cpufreq core to bring the cpufreq policy online.
This can happen if cpufreq driver is a module, CPU0 is hotplugged out and then
the cpufreq driver is inserted.
--
viresh
^ permalink raw reply [flat|nested] 85+ messages in thread* [PATCH v2 06/16] arm64: dts: mt7622: add cpufreq related device nodes
@ 2018-02-07 3:33 ` Viresh Kumar
0 siblings, 0 replies; 85+ messages in thread
From: Viresh Kumar @ 2018-02-07 3:33 UTC (permalink / raw)
To: linux-arm-kernel
On 06-02-18, 17:52, sean.wang at mediatek.com wrote:
> cpus {
> #address-cells = <2>;
> #size-cells = <0>;
> @@ -26,6 +70,10 @@
> device_type = "cpu";
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x0>;
> + clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
> + <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
> + clock-names = "cpu", "intermediate";
> + operating-points-v2 = <&cpu_opp_table>;
> enable-method = "psci";
> clock-frequency = <1300000000>;
> };
> @@ -34,6 +82,7 @@
> device_type = "cpu";
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x1>;
> + operating-points-v2 = <&cpu_opp_table>;
> enable-method = "psci";
> clock-frequency = <1300000000>;
> };
Sorry for not picking this earlier, but you should probably add the same clock
related properties for both cpu nodes here. Things will break if CPU1 is used by
the cpufreq core to bring the cpufreq policy online.
This can happen if cpufreq driver is a module, CPU0 is hotplugged out and then
the cpufreq driver is inserted.
--
viresh
^ permalink raw reply [flat|nested] 85+ messages in thread* Re: [PATCH v2 06/16] arm64: dts: mt7622: add cpufreq related device nodes
@ 2018-02-07 3:33 ` Viresh Kumar
0 siblings, 0 replies; 85+ messages in thread
From: Viresh Kumar @ 2018-02-07 3:33 UTC (permalink / raw)
To: sean.wang-NuS5LvNUpcJWk0Htik3J/w
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
On 06-02-18, 17:52, sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org wrote:
> cpus {
> #address-cells = <2>;
> #size-cells = <0>;
> @@ -26,6 +70,10 @@
> device_type = "cpu";
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x0>;
> + clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
> + <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
> + clock-names = "cpu", "intermediate";
> + operating-points-v2 = <&cpu_opp_table>;
> enable-method = "psci";
> clock-frequency = <1300000000>;
> };
> @@ -34,6 +82,7 @@
> device_type = "cpu";
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x1>;
> + operating-points-v2 = <&cpu_opp_table>;
> enable-method = "psci";
> clock-frequency = <1300000000>;
> };
Sorry for not picking this earlier, but you should probably add the same clock
related properties for both cpu nodes here. Things will break if CPU1 is used by
the cpufreq core to bring the cpufreq policy online.
This can happen if cpufreq driver is a module, CPU0 is hotplugged out and then
the cpufreq driver is inserted.
--
viresh
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 85+ messages in thread* Re: [PATCH v2 06/16] arm64: dts: mt7622: add cpufreq related device nodes
2018-02-07 3:33 ` Viresh Kumar
(?)
@ 2018-02-07 6:16 ` Sean Wang
-1 siblings, 0 replies; 85+ messages in thread
From: Sean Wang @ 2018-02-07 6:16 UTC (permalink / raw)
To: Viresh Kumar
Cc: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek,
linux-arm-kernel, linux-kernel
On Wed, 2018-02-07 at 09:03 +0530, Viresh Kumar wrote:
> On 06-02-18, 17:52, sean.wang@mediatek.com wrote:
> > cpus {
> > #address-cells = <2>;
> > #size-cells = <0>;
> > @@ -26,6 +70,10 @@
> > device_type = "cpu";
> > compatible = "arm,cortex-a53", "arm,armv8";
> > reg = <0x0 0x0>;
> > + clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
> > + <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
> > + clock-names = "cpu", "intermediate";
> > + operating-points-v2 = <&cpu_opp_table>;
> > enable-method = "psci";
> > clock-frequency = <1300000000>;
> > };
> > @@ -34,6 +82,7 @@
> > device_type = "cpu";
> > compatible = "arm,cortex-a53", "arm,armv8";
> > reg = <0x0 0x1>;
> > + operating-points-v2 = <&cpu_opp_table>;
> > enable-method = "psci";
> > clock-frequency = <1300000000>;
> > };
>
> Sorry for not picking this earlier, but you should probably add the same clock
> related properties for both cpu nodes here. Things will break if CPU1 is used by
> the cpufreq core to bring the cpufreq policy online.
>
> This can happen if cpufreq driver is a module, CPU0 is hotplugged out and then
> the cpufreq driver is inserted.
>
mt7622 cpu0 does not support hotplug. do I still need to add same clock
related properties for both cpu nodes here?
^ permalink raw reply [flat|nested] 85+ messages in thread* [PATCH v2 06/16] arm64: dts: mt7622: add cpufreq related device nodes
@ 2018-02-07 6:16 ` Sean Wang
0 siblings, 0 replies; 85+ messages in thread
From: Sean Wang @ 2018-02-07 6:16 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 2018-02-07 at 09:03 +0530, Viresh Kumar wrote:
> On 06-02-18, 17:52, sean.wang at mediatek.com wrote:
> > cpus {
> > #address-cells = <2>;
> > #size-cells = <0>;
> > @@ -26,6 +70,10 @@
> > device_type = "cpu";
> > compatible = "arm,cortex-a53", "arm,armv8";
> > reg = <0x0 0x0>;
> > + clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
> > + <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
> > + clock-names = "cpu", "intermediate";
> > + operating-points-v2 = <&cpu_opp_table>;
> > enable-method = "psci";
> > clock-frequency = <1300000000>;
> > };
> > @@ -34,6 +82,7 @@
> > device_type = "cpu";
> > compatible = "arm,cortex-a53", "arm,armv8";
> > reg = <0x0 0x1>;
> > + operating-points-v2 = <&cpu_opp_table>;
> > enable-method = "psci";
> > clock-frequency = <1300000000>;
> > };
>
> Sorry for not picking this earlier, but you should probably add the same clock
> related properties for both cpu nodes here. Things will break if CPU1 is used by
> the cpufreq core to bring the cpufreq policy online.
>
> This can happen if cpufreq driver is a module, CPU0 is hotplugged out and then
> the cpufreq driver is inserted.
>
mt7622 cpu0 does not support hotplug. do I still need to add same clock
related properties for both cpu nodes here?
^ permalink raw reply [flat|nested] 85+ messages in thread* Re: [PATCH v2 06/16] arm64: dts: mt7622: add cpufreq related device nodes
@ 2018-02-07 6:16 ` Sean Wang
0 siblings, 0 replies; 85+ messages in thread
From: Sean Wang @ 2018-02-07 6:16 UTC (permalink / raw)
To: Viresh Kumar
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
On Wed, 2018-02-07 at 09:03 +0530, Viresh Kumar wrote:
> On 06-02-18, 17:52, sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org wrote:
> > cpus {
> > #address-cells = <2>;
> > #size-cells = <0>;
> > @@ -26,6 +70,10 @@
> > device_type = "cpu";
> > compatible = "arm,cortex-a53", "arm,armv8";
> > reg = <0x0 0x0>;
> > + clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
> > + <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
> > + clock-names = "cpu", "intermediate";
> > + operating-points-v2 = <&cpu_opp_table>;
> > enable-method = "psci";
> > clock-frequency = <1300000000>;
> > };
> > @@ -34,6 +82,7 @@
> > device_type = "cpu";
> > compatible = "arm,cortex-a53", "arm,armv8";
> > reg = <0x0 0x1>;
> > + operating-points-v2 = <&cpu_opp_table>;
> > enable-method = "psci";
> > clock-frequency = <1300000000>;
> > };
>
> Sorry for not picking this earlier, but you should probably add the same clock
> related properties for both cpu nodes here. Things will break if CPU1 is used by
> the cpufreq core to bring the cpufreq policy online.
>
> This can happen if cpufreq driver is a module, CPU0 is hotplugged out and then
> the cpufreq driver is inserted.
>
mt7622 cpu0 does not support hotplug. do I still need to add same clock
related properties for both cpu nodes here?
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 85+ messages in thread* Re: [PATCH v2 06/16] arm64: dts: mt7622: add cpufreq related device nodes
2018-02-07 6:16 ` Sean Wang
(?)
@ 2018-02-07 6:18 ` Viresh Kumar
-1 siblings, 0 replies; 85+ messages in thread
From: Viresh Kumar @ 2018-02-07 6:18 UTC (permalink / raw)
To: Sean Wang
Cc: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek,
linux-arm-kernel, linux-kernel
On 07-02-18, 14:16, Sean Wang wrote:
> On Wed, 2018-02-07 at 09:03 +0530, Viresh Kumar wrote:
> > On 06-02-18, 17:52, sean.wang@mediatek.com wrote:
> > > cpus {
> > > #address-cells = <2>;
> > > #size-cells = <0>;
> > > @@ -26,6 +70,10 @@
> > > device_type = "cpu";
> > > compatible = "arm,cortex-a53", "arm,armv8";
> > > reg = <0x0 0x0>;
> > > + clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
> > > + <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
> > > + clock-names = "cpu", "intermediate";
> > > + operating-points-v2 = <&cpu_opp_table>;
> > > enable-method = "psci";
> > > clock-frequency = <1300000000>;
> > > };
> > > @@ -34,6 +82,7 @@
> > > device_type = "cpu";
> > > compatible = "arm,cortex-a53", "arm,armv8";
> > > reg = <0x0 0x1>;
> > > + operating-points-v2 = <&cpu_opp_table>;
> > > enable-method = "psci";
> > > clock-frequency = <1300000000>;
> > > };
> >
> > Sorry for not picking this earlier, but you should probably add the same clock
> > related properties for both cpu nodes here. Things will break if CPU1 is used by
> > the cpufreq core to bring the cpufreq policy online.
> >
> > This can happen if cpufreq driver is a module, CPU0 is hotplugged out and then
> > the cpufreq driver is inserted.
> >
>
> mt7622 cpu0 does not support hotplug. do I still need to add same clock
> related properties for both cpu nodes here?
Normally we should always add these properties to all the CPUs, as that's the
real scenario hardware configuration wise.
But I am not sure if something else will break if you don't provide clocks in
CPU1.
@Rob @Mark: What do you suggest ?
--
viresh
^ permalink raw reply [flat|nested] 85+ messages in thread* [PATCH v2 06/16] arm64: dts: mt7622: add cpufreq related device nodes
@ 2018-02-07 6:18 ` Viresh Kumar
0 siblings, 0 replies; 85+ messages in thread
From: Viresh Kumar @ 2018-02-07 6:18 UTC (permalink / raw)
To: linux-arm-kernel
On 07-02-18, 14:16, Sean Wang wrote:
> On Wed, 2018-02-07 at 09:03 +0530, Viresh Kumar wrote:
> > On 06-02-18, 17:52, sean.wang at mediatek.com wrote:
> > > cpus {
> > > #address-cells = <2>;
> > > #size-cells = <0>;
> > > @@ -26,6 +70,10 @@
> > > device_type = "cpu";
> > > compatible = "arm,cortex-a53", "arm,armv8";
> > > reg = <0x0 0x0>;
> > > + clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
> > > + <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
> > > + clock-names = "cpu", "intermediate";
> > > + operating-points-v2 = <&cpu_opp_table>;
> > > enable-method = "psci";
> > > clock-frequency = <1300000000>;
> > > };
> > > @@ -34,6 +82,7 @@
> > > device_type = "cpu";
> > > compatible = "arm,cortex-a53", "arm,armv8";
> > > reg = <0x0 0x1>;
> > > + operating-points-v2 = <&cpu_opp_table>;
> > > enable-method = "psci";
> > > clock-frequency = <1300000000>;
> > > };
> >
> > Sorry for not picking this earlier, but you should probably add the same clock
> > related properties for both cpu nodes here. Things will break if CPU1 is used by
> > the cpufreq core to bring the cpufreq policy online.
> >
> > This can happen if cpufreq driver is a module, CPU0 is hotplugged out and then
> > the cpufreq driver is inserted.
> >
>
> mt7622 cpu0 does not support hotplug. do I still need to add same clock
> related properties for both cpu nodes here?
Normally we should always add these properties to all the CPUs, as that's the
real scenario hardware configuration wise.
But I am not sure if something else will break if you don't provide clocks in
CPU1.
@Rob @Mark: What do you suggest ?
--
viresh
^ permalink raw reply [flat|nested] 85+ messages in thread* Re: [PATCH v2 06/16] arm64: dts: mt7622: add cpufreq related device nodes
@ 2018-02-07 6:18 ` Viresh Kumar
0 siblings, 0 replies; 85+ messages in thread
From: Viresh Kumar @ 2018-02-07 6:18 UTC (permalink / raw)
To: Sean Wang
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
On 07-02-18, 14:16, Sean Wang wrote:
> On Wed, 2018-02-07 at 09:03 +0530, Viresh Kumar wrote:
> > On 06-02-18, 17:52, sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org wrote:
> > > cpus {
> > > #address-cells = <2>;
> > > #size-cells = <0>;
> > > @@ -26,6 +70,10 @@
> > > device_type = "cpu";
> > > compatible = "arm,cortex-a53", "arm,armv8";
> > > reg = <0x0 0x0>;
> > > + clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
> > > + <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
> > > + clock-names = "cpu", "intermediate";
> > > + operating-points-v2 = <&cpu_opp_table>;
> > > enable-method = "psci";
> > > clock-frequency = <1300000000>;
> > > };
> > > @@ -34,6 +82,7 @@
> > > device_type = "cpu";
> > > compatible = "arm,cortex-a53", "arm,armv8";
> > > reg = <0x0 0x1>;
> > > + operating-points-v2 = <&cpu_opp_table>;
> > > enable-method = "psci";
> > > clock-frequency = <1300000000>;
> > > };
> >
> > Sorry for not picking this earlier, but you should probably add the same clock
> > related properties for both cpu nodes here. Things will break if CPU1 is used by
> > the cpufreq core to bring the cpufreq policy online.
> >
> > This can happen if cpufreq driver is a module, CPU0 is hotplugged out and then
> > the cpufreq driver is inserted.
> >
>
> mt7622 cpu0 does not support hotplug. do I still need to add same clock
> related properties for both cpu nodes here?
Normally we should always add these properties to all the CPUs, as that's the
real scenario hardware configuration wise.
But I am not sure if something else will break if you don't provide clocks in
CPU1.
@Rob @Mark: What do you suggest ?
--
viresh
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 85+ messages in thread* Re: [PATCH v2 06/16] arm64: dts: mt7622: add cpufreq related device nodes
2018-02-07 6:18 ` Viresh Kumar
(?)
@ 2018-02-07 8:34 ` Sean Wang
-1 siblings, 0 replies; 85+ messages in thread
From: Sean Wang @ 2018-02-07 8:34 UTC (permalink / raw)
To: Viresh Kumar
Cc: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek,
linux-arm-kernel, linux-kernel
On Wed, 2018-02-07 at 11:48 +0530, Viresh Kumar wrote:
> On 07-02-18, 14:16, Sean Wang wrote:
> > On Wed, 2018-02-07 at 09:03 +0530, Viresh Kumar wrote:
> > > On 06-02-18, 17:52, sean.wang@mediatek.com wrote:
> > > > cpus {
> > > > #address-cells = <2>;
> > > > #size-cells = <0>;
> > > > @@ -26,6 +70,10 @@
> > > > device_type = "cpu";
> > > > compatible = "arm,cortex-a53", "arm,armv8";
> > > > reg = <0x0 0x0>;
> > > > + clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
> > > > + <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
> > > > + clock-names = "cpu", "intermediate";
> > > > + operating-points-v2 = <&cpu_opp_table>;
> > > > enable-method = "psci";
> > > > clock-frequency = <1300000000>;
> > > > };
> > > > @@ -34,6 +82,7 @@
> > > > device_type = "cpu";
> > > > compatible = "arm,cortex-a53", "arm,armv8";
> > > > reg = <0x0 0x1>;
> > > > + operating-points-v2 = <&cpu_opp_table>;
> > > > enable-method = "psci";
> > > > clock-frequency = <1300000000>;
> > > > };
> > >
> > > Sorry for not picking this earlier, but you should probably add the same clock
> > > related properties for both cpu nodes here. Things will break if CPU1 is used by
> > > the cpufreq core to bring the cpufreq policy online.
> > >
> > > This can happen if cpufreq driver is a module, CPU0 is hotplugged out and then
> > > the cpufreq driver is inserted.
> > >
> >
> > mt7622 cpu0 does not support hotplug. do I still need to add same clock
> > related properties for both cpu nodes here?
>
> Normally we should always add these properties to all the CPUs, as that's the
> real scenario hardware configuration wise.
>
Agree on, I will add these missing clock properties also into the cpu1
node to reflect the hardware actually should have.
That also is devicetree wants us to do to describe the device more
closely.
> But I am not sure if something else will break if you don't provide clocks in
> CPU1.
>
> @Rob @Mark: What do you suggest ?
>
^ permalink raw reply [flat|nested] 85+ messages in thread* [PATCH v2 06/16] arm64: dts: mt7622: add cpufreq related device nodes
@ 2018-02-07 8:34 ` Sean Wang
0 siblings, 0 replies; 85+ messages in thread
From: Sean Wang @ 2018-02-07 8:34 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 2018-02-07 at 11:48 +0530, Viresh Kumar wrote:
> On 07-02-18, 14:16, Sean Wang wrote:
> > On Wed, 2018-02-07 at 09:03 +0530, Viresh Kumar wrote:
> > > On 06-02-18, 17:52, sean.wang at mediatek.com wrote:
> > > > cpus {
> > > > #address-cells = <2>;
> > > > #size-cells = <0>;
> > > > @@ -26,6 +70,10 @@
> > > > device_type = "cpu";
> > > > compatible = "arm,cortex-a53", "arm,armv8";
> > > > reg = <0x0 0x0>;
> > > > + clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
> > > > + <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
> > > > + clock-names = "cpu", "intermediate";
> > > > + operating-points-v2 = <&cpu_opp_table>;
> > > > enable-method = "psci";
> > > > clock-frequency = <1300000000>;
> > > > };
> > > > @@ -34,6 +82,7 @@
> > > > device_type = "cpu";
> > > > compatible = "arm,cortex-a53", "arm,armv8";
> > > > reg = <0x0 0x1>;
> > > > + operating-points-v2 = <&cpu_opp_table>;
> > > > enable-method = "psci";
> > > > clock-frequency = <1300000000>;
> > > > };
> > >
> > > Sorry for not picking this earlier, but you should probably add the same clock
> > > related properties for both cpu nodes here. Things will break if CPU1 is used by
> > > the cpufreq core to bring the cpufreq policy online.
> > >
> > > This can happen if cpufreq driver is a module, CPU0 is hotplugged out and then
> > > the cpufreq driver is inserted.
> > >
> >
> > mt7622 cpu0 does not support hotplug. do I still need to add same clock
> > related properties for both cpu nodes here?
>
> Normally we should always add these properties to all the CPUs, as that's the
> real scenario hardware configuration wise.
>
Agree on, I will add these missing clock properties also into the cpu1
node to reflect the hardware actually should have.
That also is devicetree wants us to do to describe the device more
closely.
> But I am not sure if something else will break if you don't provide clocks in
> CPU1.
>
> @Rob @Mark: What do you suggest ?
>
^ permalink raw reply [flat|nested] 85+ messages in thread* Re: [PATCH v2 06/16] arm64: dts: mt7622: add cpufreq related device nodes
@ 2018-02-07 8:34 ` Sean Wang
0 siblings, 0 replies; 85+ messages in thread
From: Sean Wang @ 2018-02-07 8:34 UTC (permalink / raw)
To: Viresh Kumar
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
On Wed, 2018-02-07 at 11:48 +0530, Viresh Kumar wrote:
> On 07-02-18, 14:16, Sean Wang wrote:
> > On Wed, 2018-02-07 at 09:03 +0530, Viresh Kumar wrote:
> > > On 06-02-18, 17:52, sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org wrote:
> > > > cpus {
> > > > #address-cells = <2>;
> > > > #size-cells = <0>;
> > > > @@ -26,6 +70,10 @@
> > > > device_type = "cpu";
> > > > compatible = "arm,cortex-a53", "arm,armv8";
> > > > reg = <0x0 0x0>;
> > > > + clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
> > > > + <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
> > > > + clock-names = "cpu", "intermediate";
> > > > + operating-points-v2 = <&cpu_opp_table>;
> > > > enable-method = "psci";
> > > > clock-frequency = <1300000000>;
> > > > };
> > > > @@ -34,6 +82,7 @@
> > > > device_type = "cpu";
> > > > compatible = "arm,cortex-a53", "arm,armv8";
> > > > reg = <0x0 0x1>;
> > > > + operating-points-v2 = <&cpu_opp_table>;
> > > > enable-method = "psci";
> > > > clock-frequency = <1300000000>;
> > > > };
> > >
> > > Sorry for not picking this earlier, but you should probably add the same clock
> > > related properties for both cpu nodes here. Things will break if CPU1 is used by
> > > the cpufreq core to bring the cpufreq policy online.
> > >
> > > This can happen if cpufreq driver is a module, CPU0 is hotplugged out and then
> > > the cpufreq driver is inserted.
> > >
> >
> > mt7622 cpu0 does not support hotplug. do I still need to add same clock
> > related properties for both cpu nodes here?
>
> Normally we should always add these properties to all the CPUs, as that's the
> real scenario hardware configuration wise.
>
Agree on, I will add these missing clock properties also into the cpu1
node to reflect the hardware actually should have.
That also is devicetree wants us to do to describe the device more
closely.
> But I am not sure if something else will break if you don't provide clocks in
> CPU1.
>
> @Rob @Mark: What do you suggest ?
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 85+ messages in thread
* [PATCH v2 07/16] arm64: dts: mt7622: turn uart0 clock to real ones
@ 2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang @ 2018-02-06 9:52 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel, Sean Wang
From: Sean Wang <sean.wang@mediatek.com>
This patch also cleans up two oscillators that provide clocks for MT7623.
Switch the uart clocks to the real ones while at it.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
---
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 15 ++-------------
1 file changed, 2 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 65eb417..845fc11 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -88,18 +88,6 @@
};
};
- uart_clk: dummy25m {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <25000000>;
- };
-
- bus_clk: dummy280m {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <280000000>;
- };
-
pwrap_clk: dummy40m {
compatible = "fixed-clock";
clock-frequency = <40000000>;
@@ -231,7 +219,8 @@
"mediatek,mt6577-uart";
reg = <0 0x11002000 0 0x400>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>, <&bus_clk>;
+ clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&pericfg CLK_PERI_UART1_PD>;
clock-names = "baud", "bus";
status = "disabled";
};
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 07/16] arm64: dts: mt7622: turn uart0 clock to real ones
@ 2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang at mediatek.com @ 2018-02-06 9:52 UTC (permalink / raw)
To: linux-arm-kernel
From: Sean Wang <sean.wang@mediatek.com>
This patch also cleans up two oscillators that provide clocks for MT7623.
Switch the uart clocks to the real ones while at it.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
---
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 15 ++-------------
1 file changed, 2 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 65eb417..845fc11 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -88,18 +88,6 @@
};
};
- uart_clk: dummy25m {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <25000000>;
- };
-
- bus_clk: dummy280m {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <280000000>;
- };
-
pwrap_clk: dummy40m {
compatible = "fixed-clock";
clock-frequency = <40000000>;
@@ -231,7 +219,8 @@
"mediatek,mt6577-uart";
reg = <0 0x11002000 0 0x400>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>, <&bus_clk>;
+ clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&pericfg CLK_PERI_UART1_PD>;
clock-names = "baud", "bus";
status = "disabled";
};
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 07/16] arm64: dts: mt7622: turn uart0 clock to real ones
@ 2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2018-02-06 9:52 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Sean Wang, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
This patch also cleans up two oscillators that provide clocks for MT7623.
Switch the uart clocks to the real ones while at it.
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Cc: Matthias Brugger <matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 15 ++-------------
1 file changed, 2 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 65eb417..845fc11 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -88,18 +88,6 @@
};
};
- uart_clk: dummy25m {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <25000000>;
- };
-
- bus_clk: dummy280m {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <280000000>;
- };
-
pwrap_clk: dummy40m {
compatible = "fixed-clock";
clock-frequency = <40000000>;
@@ -231,7 +219,8 @@
"mediatek,mt6577-uart";
reg = <0 0x11002000 0 0x400>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>, <&bus_clk>;
+ clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&pericfg CLK_PERI_UART1_PD>;
clock-names = "baud", "bus";
status = "disabled";
};
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread
* [PATCH v2 08/16] arm64: dts: mt7622: add SoC and peripheral related device nodes
2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
(?)
@ 2018-02-06 9:52 ` sean.wang
-1 siblings, 0 replies; 85+ messages in thread
From: sean.wang @ 2018-02-06 9:52 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel, Sean Wang, Andrew-CT Chen,
Zhiyong Tao, Zhi Mao, Jun Gao, Leilk Liu
From: Sean Wang <sean.wang@mediatek.com>
Add watchdog, rtc, auxadc, cir, efuse, rng, uart[1-4], pwm, i2c[0-2],
spi[0-1] and btif nodes
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
Cc: Zhiyong Tao <zhiyong.tao@mediatek.com>
Cc: Zhi Mao <zhi.mao@mediatek.com>
Cc: Jun Gao <jun.gao@mediatek.com>
Cc: Leilk Liu <leilk.liu@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 54 ++++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 194 +++++++++++++++++++++++++++
2 files changed, 248 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index bbf4d03..2a2247b 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -235,6 +235,34 @@
};
};
+&btif {
+ status = "okay";
+};
+
+&cir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&irrx_pins>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ status = "okay";
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm7_pins>;
+ status = "okay";
+};
+
&pwrap {
pinctrl-names = "default";
pinctrl-0 = <&pmic_bus_pins>;
@@ -242,6 +270,32 @@
status = "okay";
};
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spic0_pins>;
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spic1_pins>;
+ status = "okay";
+};
+
&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&watchdog {
+ pinctrl-names = "default";
+ pinctrl-0 = <&watchdog_pins>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 845fc11..2330ddc 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -173,6 +173,16 @@
clock-names = "hif_sel";
};
+ cir: cir@10009000 {
+ compatible = "mediatek,mt7622-cir";
+ reg = <0 0x10009000 0 0x1000>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_IRRX_PD>,
+ <&topckgen CLK_TOP_AXI_SEL>;
+ clock-names = "clk", "bus";
+ status = "disabled";
+ };
+
sysirq: interrupt-controller@10200620 {
compatible = "mediatek,mt7622-sysirq",
"mediatek,mt6577-sysirq";
@@ -182,6 +192,18 @@
reg = <0 0x10200620 0 0x20>;
};
+ efuse: efuse@10206000 {
+ compatible = "mediatek,mt7622-efuse",
+ "mediatek,efuse";
+ reg = <0 0x10206000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ thermal_calibration: calib@198 {
+ reg = <0x198 0x8>;
+ };
+ };
+
apmixedsys: apmixedsys@10209000 {
compatible = "mediatek,mt7622-apmixedsys",
"syscon";
@@ -196,6 +218,14 @@
#clock-cells = <1>;
};
+ rng: rng@1020f000 {
+ compatible = "mediatek,mt7622-rng",
+ "mediatek,mt7623-rng";
+ reg = <0 0x1020f000 0 0x1000>;
+ clocks = <&infracfg CLK_INFRA_TRNG>;
+ clock-names = "rng";
+ };
+
pio: pinctrl@10211000 {
compatible = "mediatek,mt7622-pinctrl";
reg = <0 0x10211000 0 0x1000>;
@@ -203,6 +233,21 @@
#gpio-cells = <2>;
};
+ watchdog: watchdog@10212000 {
+ compatible = "mediatek,mt7622-wdt",
+ "mediatek,mt6589-wdt";
+ reg = <0 0x10212000 0 0x800>;
+ };
+
+ rtc: rtc@10212800 {
+ compatible = "mediatek,mt7622-rtc",
+ "mediatek,soc-rtc";
+ reg = <0 0x10212800 0 0x200>;
+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_RTC>;
+ clock-names = "rtc";
+ };
+
gic: interrupt-controller@10300000 {
compatible = "arm,gic-400";
interrupt-controller;
@@ -214,6 +259,14 @@
<0 0x10360000 0 0x2000>;
};
+ auxadc: adc@11001000 {
+ compatible = "mediatek,mt7622-auxadc";
+ reg = <0 0x11001000 0 0x1000>;
+ clocks = <&pericfg CLK_PERI_AUXADC_PD>;
+ clock-names = "main";
+ #io-channel-cells = <1>;
+ };
+
uart0: serial@11002000 {
compatible = "mediatek,mt7622-uart",
"mediatek,mt6577-uart";
@@ -225,6 +278,147 @@
status = "disabled";
};
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt7622-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x400>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&pericfg CLK_PERI_UART1_PD>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart2: serial@11004000 {
+ compatible = "mediatek,mt7622-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11004000 0 0x400>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&pericfg CLK_PERI_UART2_PD>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart3: serial@11005000 {
+ compatible = "mediatek,mt7622-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11005000 0 0x400>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&pericfg CLK_PERI_UART3_PD>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ pwm: pwm@11006000 {
+ compatible = "mediatek,mt7622-pwm";
+ reg = <0 0x11006000 0 0x1000>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_PWM_SEL>,
+ <&pericfg CLK_PERI_PWM_PD>,
+ <&pericfg CLK_PERI_PWM1_PD>,
+ <&pericfg CLK_PERI_PWM2_PD>,
+ <&pericfg CLK_PERI_PWM3_PD>,
+ <&pericfg CLK_PERI_PWM4_PD>,
+ <&pericfg CLK_PERI_PWM5_PD>,
+ <&pericfg CLK_PERI_PWM6_PD>;
+ clock-names = "top", "main", "pwm1", "pwm2", "pwm3", "pwm4",
+ "pwm5", "pwm6";
+ status = "disabled";
+ };
+
+ i2c0: i2c@11007000 {
+ compatible = "mediatek,mt7622-i2c";
+ reg = <0 0x11007000 0 0x90>,
+ <0 0x11000100 0 0x80>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C0_PD>,
+ <&pericfg CLK_PERI_AP_DMA_PD>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11008000 {
+ compatible = "mediatek,mt7622-i2c";
+ reg = <0 0x11008000 0 0x90>,
+ <0 0x11000180 0 0x80>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C1_PD>,
+ <&pericfg CLK_PERI_AP_DMA_PD>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11009000 {
+ compatible = "mediatek,mt7622-i2c";
+ reg = <0 0x11009000 0 0x90>,
+ <0 0x11000200 0 0x80>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C2_PD>,
+ <&pericfg CLK_PERI_AP_DMA_PD>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi0: spi@1100a000 {
+ compatible = "mediatek,mt7622-spi";
+ reg = <0 0x1100a000 0 0x100>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+ <&topckgen CLK_TOP_SPI0_SEL>,
+ <&pericfg CLK_PERI_SPI0_PD>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ btif: serial@1100c000 {
+ compatible = "mediatek,mt7622-btif",
+ "mediatek,mtk-btif";
+ reg = <0 0x1100c000 0 0x1000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_BTIF_PD>;
+ clock-names = "main";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ spi1: spi@11016000 {
+ compatible = "mediatek,mt7622-spi";
+ reg = <0 0x11016000 0 0x100>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+ <&topckgen CLK_TOP_SPI1_SEL>,
+ <&pericfg CLK_PERI_SPI1_PD>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart4: serial@11019000 {
+ compatible = "mediatek,mt7622-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11019000 0 0x400>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&pericfg CLK_PERI_UART4_PD>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
ssusbsys: ssusbsys@1a000000 {
compatible = "mediatek,mt7622-ssusbsys",
"syscon";
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 08/16] arm64: dts: mt7622: add SoC and peripheral related device nodes
@ 2018-02-06 9:52 ` sean.wang
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang at mediatek.com @ 2018-02-06 9:52 UTC (permalink / raw)
To: linux-arm-kernel
From: Sean Wang <sean.wang@mediatek.com>
Add watchdog, rtc, auxadc, cir, efuse, rng, uart[1-4], pwm, i2c[0-2],
spi[0-1] and btif nodes
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
Cc: Zhiyong Tao <zhiyong.tao@mediatek.com>
Cc: Zhi Mao <zhi.mao@mediatek.com>
Cc: Jun Gao <jun.gao@mediatek.com>
Cc: Leilk Liu <leilk.liu@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 54 ++++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 194 +++++++++++++++++++++++++++
2 files changed, 248 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index bbf4d03..2a2247b 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -235,6 +235,34 @@
};
};
+&btif {
+ status = "okay";
+};
+
+&cir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&irrx_pins>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ status = "okay";
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm7_pins>;
+ status = "okay";
+};
+
&pwrap {
pinctrl-names = "default";
pinctrl-0 = <&pmic_bus_pins>;
@@ -242,6 +270,32 @@
status = "okay";
};
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spic0_pins>;
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spic1_pins>;
+ status = "okay";
+};
+
&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&watchdog {
+ pinctrl-names = "default";
+ pinctrl-0 = <&watchdog_pins>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 845fc11..2330ddc 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -173,6 +173,16 @@
clock-names = "hif_sel";
};
+ cir: cir at 10009000 {
+ compatible = "mediatek,mt7622-cir";
+ reg = <0 0x10009000 0 0x1000>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_IRRX_PD>,
+ <&topckgen CLK_TOP_AXI_SEL>;
+ clock-names = "clk", "bus";
+ status = "disabled";
+ };
+
sysirq: interrupt-controller at 10200620 {
compatible = "mediatek,mt7622-sysirq",
"mediatek,mt6577-sysirq";
@@ -182,6 +192,18 @@
reg = <0 0x10200620 0 0x20>;
};
+ efuse: efuse at 10206000 {
+ compatible = "mediatek,mt7622-efuse",
+ "mediatek,efuse";
+ reg = <0 0x10206000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ thermal_calibration: calib at 198 {
+ reg = <0x198 0x8>;
+ };
+ };
+
apmixedsys: apmixedsys at 10209000 {
compatible = "mediatek,mt7622-apmixedsys",
"syscon";
@@ -196,6 +218,14 @@
#clock-cells = <1>;
};
+ rng: rng at 1020f000 {
+ compatible = "mediatek,mt7622-rng",
+ "mediatek,mt7623-rng";
+ reg = <0 0x1020f000 0 0x1000>;
+ clocks = <&infracfg CLK_INFRA_TRNG>;
+ clock-names = "rng";
+ };
+
pio: pinctrl at 10211000 {
compatible = "mediatek,mt7622-pinctrl";
reg = <0 0x10211000 0 0x1000>;
@@ -203,6 +233,21 @@
#gpio-cells = <2>;
};
+ watchdog: watchdog at 10212000 {
+ compatible = "mediatek,mt7622-wdt",
+ "mediatek,mt6589-wdt";
+ reg = <0 0x10212000 0 0x800>;
+ };
+
+ rtc: rtc at 10212800 {
+ compatible = "mediatek,mt7622-rtc",
+ "mediatek,soc-rtc";
+ reg = <0 0x10212800 0 0x200>;
+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_RTC>;
+ clock-names = "rtc";
+ };
+
gic: interrupt-controller at 10300000 {
compatible = "arm,gic-400";
interrupt-controller;
@@ -214,6 +259,14 @@
<0 0x10360000 0 0x2000>;
};
+ auxadc: adc at 11001000 {
+ compatible = "mediatek,mt7622-auxadc";
+ reg = <0 0x11001000 0 0x1000>;
+ clocks = <&pericfg CLK_PERI_AUXADC_PD>;
+ clock-names = "main";
+ #io-channel-cells = <1>;
+ };
+
uart0: serial at 11002000 {
compatible = "mediatek,mt7622-uart",
"mediatek,mt6577-uart";
@@ -225,6 +278,147 @@
status = "disabled";
};
+ uart1: serial at 11003000 {
+ compatible = "mediatek,mt7622-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x400>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&pericfg CLK_PERI_UART1_PD>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart2: serial at 11004000 {
+ compatible = "mediatek,mt7622-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11004000 0 0x400>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&pericfg CLK_PERI_UART2_PD>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart3: serial at 11005000 {
+ compatible = "mediatek,mt7622-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11005000 0 0x400>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&pericfg CLK_PERI_UART3_PD>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ pwm: pwm at 11006000 {
+ compatible = "mediatek,mt7622-pwm";
+ reg = <0 0x11006000 0 0x1000>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_PWM_SEL>,
+ <&pericfg CLK_PERI_PWM_PD>,
+ <&pericfg CLK_PERI_PWM1_PD>,
+ <&pericfg CLK_PERI_PWM2_PD>,
+ <&pericfg CLK_PERI_PWM3_PD>,
+ <&pericfg CLK_PERI_PWM4_PD>,
+ <&pericfg CLK_PERI_PWM5_PD>,
+ <&pericfg CLK_PERI_PWM6_PD>;
+ clock-names = "top", "main", "pwm1", "pwm2", "pwm3", "pwm4",
+ "pwm5", "pwm6";
+ status = "disabled";
+ };
+
+ i2c0: i2c at 11007000 {
+ compatible = "mediatek,mt7622-i2c";
+ reg = <0 0x11007000 0 0x90>,
+ <0 0x11000100 0 0x80>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C0_PD>,
+ <&pericfg CLK_PERI_AP_DMA_PD>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c at 11008000 {
+ compatible = "mediatek,mt7622-i2c";
+ reg = <0 0x11008000 0 0x90>,
+ <0 0x11000180 0 0x80>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C1_PD>,
+ <&pericfg CLK_PERI_AP_DMA_PD>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c at 11009000 {
+ compatible = "mediatek,mt7622-i2c";
+ reg = <0 0x11009000 0 0x90>,
+ <0 0x11000200 0 0x80>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C2_PD>,
+ <&pericfg CLK_PERI_AP_DMA_PD>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi0: spi at 1100a000 {
+ compatible = "mediatek,mt7622-spi";
+ reg = <0 0x1100a000 0 0x100>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+ <&topckgen CLK_TOP_SPI0_SEL>,
+ <&pericfg CLK_PERI_SPI0_PD>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ btif: serial at 1100c000 {
+ compatible = "mediatek,mt7622-btif",
+ "mediatek,mtk-btif";
+ reg = <0 0x1100c000 0 0x1000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_BTIF_PD>;
+ clock-names = "main";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ spi1: spi at 11016000 {
+ compatible = "mediatek,mt7622-spi";
+ reg = <0 0x11016000 0 0x100>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+ <&topckgen CLK_TOP_SPI1_SEL>,
+ <&pericfg CLK_PERI_SPI1_PD>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart4: serial at 11019000 {
+ compatible = "mediatek,mt7622-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11019000 0 0x400>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&pericfg CLK_PERI_UART4_PD>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
ssusbsys: ssusbsys at 1a000000 {
compatible = "mediatek,mt7622-ssusbsys",
"syscon";
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 08/16] arm64: dts: mt7622: add SoC and peripheral related device nodes
@ 2018-02-06 9:52 ` sean.wang
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang @ 2018-02-06 9:52 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel, Sean Wang, Andrew-CT Chen,
Zhiyong Tao, Zhi Mao, Jun Gao, Leilk Liu
From: Sean Wang <sean.wang@mediatek.com>
Add watchdog, rtc, auxadc, cir, efuse, rng, uart[1-4], pwm, i2c[0-2],
spi[0-1] and btif nodes
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
Cc: Zhiyong Tao <zhiyong.tao@mediatek.com>
Cc: Zhi Mao <zhi.mao@mediatek.com>
Cc: Jun Gao <jun.gao@mediatek.com>
Cc: Leilk Liu <leilk.liu@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 54 ++++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 194 +++++++++++++++++++++++++++
2 files changed, 248 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index bbf4d03..2a2247b 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -235,6 +235,34 @@
};
};
+&btif {
+ status = "okay";
+};
+
+&cir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&irrx_pins>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ status = "okay";
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm7_pins>;
+ status = "okay";
+};
+
&pwrap {
pinctrl-names = "default";
pinctrl-0 = <&pmic_bus_pins>;
@@ -242,6 +270,32 @@
status = "okay";
};
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spic0_pins>;
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spic1_pins>;
+ status = "okay";
+};
+
&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&watchdog {
+ pinctrl-names = "default";
+ pinctrl-0 = <&watchdog_pins>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 845fc11..2330ddc 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -173,6 +173,16 @@
clock-names = "hif_sel";
};
+ cir: cir@10009000 {
+ compatible = "mediatek,mt7622-cir";
+ reg = <0 0x10009000 0 0x1000>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_IRRX_PD>,
+ <&topckgen CLK_TOP_AXI_SEL>;
+ clock-names = "clk", "bus";
+ status = "disabled";
+ };
+
sysirq: interrupt-controller@10200620 {
compatible = "mediatek,mt7622-sysirq",
"mediatek,mt6577-sysirq";
@@ -182,6 +192,18 @@
reg = <0 0x10200620 0 0x20>;
};
+ efuse: efuse@10206000 {
+ compatible = "mediatek,mt7622-efuse",
+ "mediatek,efuse";
+ reg = <0 0x10206000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ thermal_calibration: calib@198 {
+ reg = <0x198 0x8>;
+ };
+ };
+
apmixedsys: apmixedsys@10209000 {
compatible = "mediatek,mt7622-apmixedsys",
"syscon";
@@ -196,6 +218,14 @@
#clock-cells = <1>;
};
+ rng: rng@1020f000 {
+ compatible = "mediatek,mt7622-rng",
+ "mediatek,mt7623-rng";
+ reg = <0 0x1020f000 0 0x1000>;
+ clocks = <&infracfg CLK_INFRA_TRNG>;
+ clock-names = "rng";
+ };
+
pio: pinctrl@10211000 {
compatible = "mediatek,mt7622-pinctrl";
reg = <0 0x10211000 0 0x1000>;
@@ -203,6 +233,21 @@
#gpio-cells = <2>;
};
+ watchdog: watchdog@10212000 {
+ compatible = "mediatek,mt7622-wdt",
+ "mediatek,mt6589-wdt";
+ reg = <0 0x10212000 0 0x800>;
+ };
+
+ rtc: rtc@10212800 {
+ compatible = "mediatek,mt7622-rtc",
+ "mediatek,soc-rtc";
+ reg = <0 0x10212800 0 0x200>;
+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_RTC>;
+ clock-names = "rtc";
+ };
+
gic: interrupt-controller@10300000 {
compatible = "arm,gic-400";
interrupt-controller;
@@ -214,6 +259,14 @@
<0 0x10360000 0 0x2000>;
};
+ auxadc: adc@11001000 {
+ compatible = "mediatek,mt7622-auxadc";
+ reg = <0 0x11001000 0 0x1000>;
+ clocks = <&pericfg CLK_PERI_AUXADC_PD>;
+ clock-names = "main";
+ #io-channel-cells = <1>;
+ };
+
uart0: serial@11002000 {
compatible = "mediatek,mt7622-uart",
"mediatek,mt6577-uart";
@@ -225,6 +278,147 @@
status = "disabled";
};
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt7622-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x400>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&pericfg CLK_PERI_UART1_PD>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart2: serial@11004000 {
+ compatible = "mediatek,mt7622-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11004000 0 0x400>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&pericfg CLK_PERI_UART2_PD>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart3: serial@11005000 {
+ compatible = "mediatek,mt7622-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11005000 0 0x400>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&pericfg CLK_PERI_UART3_PD>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ pwm: pwm@11006000 {
+ compatible = "mediatek,mt7622-pwm";
+ reg = <0 0x11006000 0 0x1000>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_PWM_SEL>,
+ <&pericfg CLK_PERI_PWM_PD>,
+ <&pericfg CLK_PERI_PWM1_PD>,
+ <&pericfg CLK_PERI_PWM2_PD>,
+ <&pericfg CLK_PERI_PWM3_PD>,
+ <&pericfg CLK_PERI_PWM4_PD>,
+ <&pericfg CLK_PERI_PWM5_PD>,
+ <&pericfg CLK_PERI_PWM6_PD>;
+ clock-names = "top", "main", "pwm1", "pwm2", "pwm3", "pwm4",
+ "pwm5", "pwm6";
+ status = "disabled";
+ };
+
+ i2c0: i2c@11007000 {
+ compatible = "mediatek,mt7622-i2c";
+ reg = <0 0x11007000 0 0x90>,
+ <0 0x11000100 0 0x80>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C0_PD>,
+ <&pericfg CLK_PERI_AP_DMA_PD>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11008000 {
+ compatible = "mediatek,mt7622-i2c";
+ reg = <0 0x11008000 0 0x90>,
+ <0 0x11000180 0 0x80>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C1_PD>,
+ <&pericfg CLK_PERI_AP_DMA_PD>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11009000 {
+ compatible = "mediatek,mt7622-i2c";
+ reg = <0 0x11009000 0 0x90>,
+ <0 0x11000200 0 0x80>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C2_PD>,
+ <&pericfg CLK_PERI_AP_DMA_PD>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi0: spi@1100a000 {
+ compatible = "mediatek,mt7622-spi";
+ reg = <0 0x1100a000 0 0x100>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+ <&topckgen CLK_TOP_SPI0_SEL>,
+ <&pericfg CLK_PERI_SPI0_PD>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ btif: serial@1100c000 {
+ compatible = "mediatek,mt7622-btif",
+ "mediatek,mtk-btif";
+ reg = <0 0x1100c000 0 0x1000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_BTIF_PD>;
+ clock-names = "main";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ spi1: spi@11016000 {
+ compatible = "mediatek,mt7622-spi";
+ reg = <0 0x11016000 0 0x100>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+ <&topckgen CLK_TOP_SPI1_SEL>,
+ <&pericfg CLK_PERI_SPI1_PD>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart4: serial@11019000 {
+ compatible = "mediatek,mt7622-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11019000 0 0x400>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&pericfg CLK_PERI_UART4_PD>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
ssusbsys: ssusbsys@1a000000 {
compatible = "mediatek,mt7622-ssusbsys",
"syscon";
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread
* [PATCH v2 09/16] arm64: dts: mt7622: add flash related device nodes
2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
(?)
@ 2018-02-06 9:52 ` sean.wang
-1 siblings, 0 replies; 85+ messages in thread
From: sean.wang @ 2018-02-06 9:52 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel, Sean Wang, RogerCC Lin, Guochun Mao
From: Sean Wang <sean.wang@mediatek.com>
add nodes for NOR flash, parallel Nand flash with error correction code
support.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: RogerCC Lin <rogercc.lin@mediatek.com>
Cc: Guochun Mao <guochun.mao@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 21 +++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 34 ++++++++++++++++++++++++++++
2 files changed, 55 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 2a2247b..59a9c36 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -235,6 +235,10 @@
};
};
+&bch {
+ status = "disabled";
+};
+
&btif {
status = "okay";
};
@@ -257,6 +261,23 @@
status = "okay";
};
+&nandc {
+ pinctrl-names = "default";
+ pinctrl-0 = <¶llel_nand_pins>;
+ status = "disabled";
+};
+
+&nor_flash {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_nor_pins>;
+ status = "disabled";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ };
+};
+
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm7_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 2330ddc..9e11baf 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -395,6 +395,40 @@
status = "disabled";
};
+ nandc: nfi@1100d000 {
+ compatible = "mediatek,mt7622-nfc";
+ reg = <0 0x1100D000 0 0x1000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_NFI_PD>,
+ <&pericfg CLK_PERI_SNFI_PD>;
+ clock-names = "nfi_clk", "pad_clk";
+ ecc-engine = <&bch>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ bch: ecc@1100e000 {
+ compatible = "mediatek,mt7622-ecc";
+ reg = <0 0x1100e000 0 0x1000>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_NFIECC_PD>;
+ clock-names = "nfiecc_clk";
+ status = "disabled";
+ };
+
+ nor_flash: spi@11014000 {
+ compatible = "mediatek,mt7622-nor",
+ "mediatek,mt8173-nor";
+ reg = <0 0x11014000 0 0xe0>;
+ clocks = <&pericfg CLK_PERI_FLASH_PD>,
+ <&topckgen CLK_TOP_FLASH_SEL>;
+ clock-names = "spi", "sf";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spi1: spi@11016000 {
compatible = "mediatek,mt7622-spi";
reg = <0 0x11016000 0 0x100>;
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 09/16] arm64: dts: mt7622: add flash related device nodes
@ 2018-02-06 9:52 ` sean.wang
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang at mediatek.com @ 2018-02-06 9:52 UTC (permalink / raw)
To: linux-arm-kernel
From: Sean Wang <sean.wang@mediatek.com>
add nodes for NOR flash, parallel Nand flash with error correction code
support.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: RogerCC Lin <rogercc.lin@mediatek.com>
Cc: Guochun Mao <guochun.mao@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 21 +++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 34 ++++++++++++++++++++++++++++
2 files changed, 55 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 2a2247b..59a9c36 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -235,6 +235,10 @@
};
};
+&bch {
+ status = "disabled";
+};
+
&btif {
status = "okay";
};
@@ -257,6 +261,23 @@
status = "okay";
};
+&nandc {
+ pinctrl-names = "default";
+ pinctrl-0 = <¶llel_nand_pins>;
+ status = "disabled";
+};
+
+&nor_flash {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_nor_pins>;
+ status = "disabled";
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ };
+};
+
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm7_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 2330ddc..9e11baf 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -395,6 +395,40 @@
status = "disabled";
};
+ nandc: nfi at 1100d000 {
+ compatible = "mediatek,mt7622-nfc";
+ reg = <0 0x1100D000 0 0x1000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_NFI_PD>,
+ <&pericfg CLK_PERI_SNFI_PD>;
+ clock-names = "nfi_clk", "pad_clk";
+ ecc-engine = <&bch>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ bch: ecc at 1100e000 {
+ compatible = "mediatek,mt7622-ecc";
+ reg = <0 0x1100e000 0 0x1000>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_NFIECC_PD>;
+ clock-names = "nfiecc_clk";
+ status = "disabled";
+ };
+
+ nor_flash: spi at 11014000 {
+ compatible = "mediatek,mt7622-nor",
+ "mediatek,mt8173-nor";
+ reg = <0 0x11014000 0 0xe0>;
+ clocks = <&pericfg CLK_PERI_FLASH_PD>,
+ <&topckgen CLK_TOP_FLASH_SEL>;
+ clock-names = "spi", "sf";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spi1: spi at 11016000 {
compatible = "mediatek,mt7622-spi";
reg = <0 0x11016000 0 0x100>;
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 09/16] arm64: dts: mt7622: add flash related device nodes
@ 2018-02-06 9:52 ` sean.wang
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang @ 2018-02-06 9:52 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: Guochun Mao, Sean Wang, linux-kernel, linux-arm-kernel, RogerCC Lin
From: Sean Wang <sean.wang@mediatek.com>
add nodes for NOR flash, parallel Nand flash with error correction code
support.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: RogerCC Lin <rogercc.lin@mediatek.com>
Cc: Guochun Mao <guochun.mao@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 21 +++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 34 ++++++++++++++++++++++++++++
2 files changed, 55 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 2a2247b..59a9c36 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -235,6 +235,10 @@
};
};
+&bch {
+ status = "disabled";
+};
+
&btif {
status = "okay";
};
@@ -257,6 +261,23 @@
status = "okay";
};
+&nandc {
+ pinctrl-names = "default";
+ pinctrl-0 = <¶llel_nand_pins>;
+ status = "disabled";
+};
+
+&nor_flash {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_nor_pins>;
+ status = "disabled";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ };
+};
+
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm7_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 2330ddc..9e11baf 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -395,6 +395,40 @@
status = "disabled";
};
+ nandc: nfi@1100d000 {
+ compatible = "mediatek,mt7622-nfc";
+ reg = <0 0x1100D000 0 0x1000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_NFI_PD>,
+ <&pericfg CLK_PERI_SNFI_PD>;
+ clock-names = "nfi_clk", "pad_clk";
+ ecc-engine = <&bch>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ bch: ecc@1100e000 {
+ compatible = "mediatek,mt7622-ecc";
+ reg = <0 0x1100e000 0 0x1000>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_NFIECC_PD>;
+ clock-names = "nfiecc_clk";
+ status = "disabled";
+ };
+
+ nor_flash: spi@11014000 {
+ compatible = "mediatek,mt7622-nor",
+ "mediatek,mt8173-nor";
+ reg = <0 0x11014000 0 0xe0>;
+ clocks = <&pericfg CLK_PERI_FLASH_PD>,
+ <&topckgen CLK_TOP_FLASH_SEL>;
+ clock-names = "spi", "sf";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spi1: spi@11016000 {
compatible = "mediatek,mt7622-spi";
reg = <0 0x11016000 0 0x100>;
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread
* [PATCH v2 10/16] arm64: dts: mt7622: add ethernet device nodes
2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
(?)
@ 2018-02-06 9:52 ` sean.wang
-1 siblings, 0 replies; 85+ messages in thread
From: sean.wang @ 2018-02-06 9:52 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel, Sean Wang
From: Sean Wang <sean.wang@mediatek.com>
add ethernet device nodes which enable GMAC1 with SGMII interface
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 22 ++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 31 ++++++++++++++++++++++++++++
2 files changed, 53 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 59a9c36..b80e8c7 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -249,6 +249,28 @@
status = "okay";
};
+ð {
+ pinctrl-names = "default";
+ pinctrl-0 = <ð_pins>;
+ status = "okay";
+
+ gmac1: mac@1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-handle = <&phy5>;
+ };
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "sgmii";
+ };
+ };
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 9e11baf..a3a409b 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -477,6 +477,37 @@
#reset-cells = <1>;
};
+ eth: ethernet@1b100000 {
+ compatible = "mediatek,mt7622-eth",
+ "mediatek,mt2701-eth",
+ "syscon";
+ reg = <0 0x1b100000 0 0x20000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_ETH_SEL>,
+ <ðsys CLK_ETH_ESW_EN>,
+ <ðsys CLK_ETH_GP0_EN>,
+ <ðsys CLK_ETH_GP1_EN>,
+ <ðsys CLK_ETH_GP2_EN>,
+ <&sgmiisys CLK_SGMII_TX250M_EN>,
+ <&sgmiisys CLK_SGMII_RX250M_EN>,
+ <&sgmiisys CLK_SGMII_CDR_REF>,
+ <&sgmiisys CLK_SGMII_CDR_FB>,
+ <&topckgen CLK_TOP_SGMIIPLL>,
+ <&apmixedsys CLK_APMIXED_ETH2PLL>;
+ clock-names = "ethif", "esw", "gp0", "gp1", "gp2",
+ "sgmii_tx250m", "sgmii_rx250m",
+ "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck",
+ "eth2pll";
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
+ mediatek,ethsys = <ðsys>;
+ mediatek,sgmiisys = <&sgmiisys>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
sgmiisys: sgmiisys@1b128000 {
compatible = "mediatek,mt7622-sgmiisys",
"syscon";
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 10/16] arm64: dts: mt7622: add ethernet device nodes
@ 2018-02-06 9:52 ` sean.wang
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang at mediatek.com @ 2018-02-06 9:52 UTC (permalink / raw)
To: linux-arm-kernel
From: Sean Wang <sean.wang@mediatek.com>
add ethernet device nodes which enable GMAC1 with SGMII interface
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 22 ++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 31 ++++++++++++++++++++++++++++
2 files changed, 53 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 59a9c36..b80e8c7 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -249,6 +249,28 @@
status = "okay";
};
+ð {
+ pinctrl-names = "default";
+ pinctrl-0 = <ð_pins>;
+ status = "okay";
+
+ gmac1: mac at 1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-handle = <&phy5>;
+ };
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy5: ethernet-phy at 5 {
+ reg = <5>;
+ phy-mode = "sgmii";
+ };
+ };
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 9e11baf..a3a409b 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -477,6 +477,37 @@
#reset-cells = <1>;
};
+ eth: ethernet at 1b100000 {
+ compatible = "mediatek,mt7622-eth",
+ "mediatek,mt2701-eth",
+ "syscon";
+ reg = <0 0x1b100000 0 0x20000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_ETH_SEL>,
+ <ðsys CLK_ETH_ESW_EN>,
+ <ðsys CLK_ETH_GP0_EN>,
+ <ðsys CLK_ETH_GP1_EN>,
+ <ðsys CLK_ETH_GP2_EN>,
+ <&sgmiisys CLK_SGMII_TX250M_EN>,
+ <&sgmiisys CLK_SGMII_RX250M_EN>,
+ <&sgmiisys CLK_SGMII_CDR_REF>,
+ <&sgmiisys CLK_SGMII_CDR_FB>,
+ <&topckgen CLK_TOP_SGMIIPLL>,
+ <&apmixedsys CLK_APMIXED_ETH2PLL>;
+ clock-names = "ethif", "esw", "gp0", "gp1", "gp2",
+ "sgmii_tx250m", "sgmii_rx250m",
+ "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck",
+ "eth2pll";
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
+ mediatek,ethsys = <ðsys>;
+ mediatek,sgmiisys = <&sgmiisys>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
sgmiisys: sgmiisys at 1b128000 {
compatible = "mediatek,mt7622-sgmiisys",
"syscon";
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 10/16] arm64: dts: mt7622: add ethernet device nodes
@ 2018-02-06 9:52 ` sean.wang
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang @ 2018-02-06 9:52 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel, Sean Wang
From: Sean Wang <sean.wang@mediatek.com>
add ethernet device nodes which enable GMAC1 with SGMII interface
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 22 ++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 31 ++++++++++++++++++++++++++++
2 files changed, 53 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 59a9c36..b80e8c7 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -249,6 +249,28 @@
status = "okay";
};
+ð {
+ pinctrl-names = "default";
+ pinctrl-0 = <ð_pins>;
+ status = "okay";
+
+ gmac1: mac@1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-handle = <&phy5>;
+ };
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "sgmii";
+ };
+ };
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 9e11baf..a3a409b 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -477,6 +477,37 @@
#reset-cells = <1>;
};
+ eth: ethernet@1b100000 {
+ compatible = "mediatek,mt7622-eth",
+ "mediatek,mt2701-eth",
+ "syscon";
+ reg = <0 0x1b100000 0 0x20000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_ETH_SEL>,
+ <ðsys CLK_ETH_ESW_EN>,
+ <ðsys CLK_ETH_GP0_EN>,
+ <ðsys CLK_ETH_GP1_EN>,
+ <ðsys CLK_ETH_GP2_EN>,
+ <&sgmiisys CLK_SGMII_TX250M_EN>,
+ <&sgmiisys CLK_SGMII_RX250M_EN>,
+ <&sgmiisys CLK_SGMII_CDR_REF>,
+ <&sgmiisys CLK_SGMII_CDR_FB>,
+ <&topckgen CLK_TOP_SGMIIPLL>,
+ <&apmixedsys CLK_APMIXED_ETH2PLL>;
+ clock-names = "ethif", "esw", "gp0", "gp1", "gp2",
+ "sgmii_tx250m", "sgmii_rx250m",
+ "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck",
+ "eth2pll";
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
+ mediatek,ethsys = <ðsys>;
+ mediatek,sgmiisys = <&sgmiisys>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
sgmiisys: sgmiisys@1b128000 {
compatible = "mediatek,mt7622-sgmiisys",
"syscon";
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread
* [PATCH v2 11/16] arm64: dts: mt7622: add PCIe device nodes
@ 2018-02-06 9:53 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang @ 2018-02-06 9:53 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel, Ryder Lee, Sean Wang
From: Ryder Lee <ryder.lee@mediatek.com>
This patch adds PCIe support fot MT7622.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 10 ++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 74 ++++++++++++++++++++++++++++
2 files changed, 84 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index b80e8c7..1007932 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -54,6 +54,16 @@
};
};
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_pins>;
+ status = "okay";
+
+ pcie@0,0 {
+ status = "okay";
+ };
+};
+
&pio {
/* eMMC is shared pin with parallel NAND */
emmc_pins_default: emmc-pins-default {
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index a3a409b..f0f18b3 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -469,6 +469,80 @@
#reset-cells = <1>;
};
+ pcie: pcie@1a140000 {
+ compatible = "mediatek,mt7622-pcie";
+ device_type = "pci";
+ reg = <0 0x1a140000 0 0x1000>,
+ <0 0x1a143000 0 0x1000>,
+ <0 0x1a145000 0 0x1000>;
+ reg-names = "subsys", "port0", "port1";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
+ <&pciesys CLK_PCIE_P1_MAC_EN>,
+ <&pciesys CLK_PCIE_P0_AHB_EN>,
+ <&pciesys CLK_PCIE_P0_AHB_EN>,
+ <&pciesys CLK_PCIE_P0_AUX_EN>,
+ <&pciesys CLK_PCIE_P1_AUX_EN>,
+ <&pciesys CLK_PCIE_P0_AXI_EN>,
+ <&pciesys CLK_PCIE_P1_AXI_EN>,
+ <&pciesys CLK_PCIE_P0_OBFF_EN>,
+ <&pciesys CLK_PCIE_P1_OBFF_EN>,
+ <&pciesys CLK_PCIE_P0_PIPE_EN>,
+ <&pciesys CLK_PCIE_P1_PIPE_EN>;
+ clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1",
+ "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1",
+ "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1";
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
+ status = "disabled";
+
+ pcie0: pcie@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ num-lanes = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+ pcie_intc0: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pcie1: pcie@1,0 {
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ num-lanes = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ pcie_intc1: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+
ethsys: syscon@1b000000 {
compatible = "mediatek,mt7622-ethsys",
"syscon";
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 11/16] arm64: dts: mt7622: add PCIe device nodes
@ 2018-02-06 9:53 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang at mediatek.com @ 2018-02-06 9:53 UTC (permalink / raw)
To: linux-arm-kernel
From: Ryder Lee <ryder.lee@mediatek.com>
This patch adds PCIe support fot MT7622.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 10 ++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 74 ++++++++++++++++++++++++++++
2 files changed, 84 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index b80e8c7..1007932 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -54,6 +54,16 @@
};
};
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_pins>;
+ status = "okay";
+
+ pcie at 0,0 {
+ status = "okay";
+ };
+};
+
&pio {
/* eMMC is shared pin with parallel NAND */
emmc_pins_default: emmc-pins-default {
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index a3a409b..f0f18b3 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -469,6 +469,80 @@
#reset-cells = <1>;
};
+ pcie: pcie at 1a140000 {
+ compatible = "mediatek,mt7622-pcie";
+ device_type = "pci";
+ reg = <0 0x1a140000 0 0x1000>,
+ <0 0x1a143000 0 0x1000>,
+ <0 0x1a145000 0 0x1000>;
+ reg-names = "subsys", "port0", "port1";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
+ <&pciesys CLK_PCIE_P1_MAC_EN>,
+ <&pciesys CLK_PCIE_P0_AHB_EN>,
+ <&pciesys CLK_PCIE_P0_AHB_EN>,
+ <&pciesys CLK_PCIE_P0_AUX_EN>,
+ <&pciesys CLK_PCIE_P1_AUX_EN>,
+ <&pciesys CLK_PCIE_P0_AXI_EN>,
+ <&pciesys CLK_PCIE_P1_AXI_EN>,
+ <&pciesys CLK_PCIE_P0_OBFF_EN>,
+ <&pciesys CLK_PCIE_P1_OBFF_EN>,
+ <&pciesys CLK_PCIE_P0_PIPE_EN>,
+ <&pciesys CLK_PCIE_P1_PIPE_EN>;
+ clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1",
+ "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1",
+ "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1";
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
+ status = "disabled";
+
+ pcie0: pcie at 0,0 {
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ num-lanes = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+ pcie_intc0: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pcie1: pcie at 1,0 {
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ num-lanes = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ pcie_intc1: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+
ethsys: syscon at 1b000000 {
compatible = "mediatek,mt7622-ethsys",
"syscon";
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 11/16] arm64: dts: mt7622: add PCIe device nodes
@ 2018-02-06 9:53 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2018-02-06 9:53 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Ryder Lee, Sean Wang
From: Ryder Lee <ryder.lee-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
This patch adds PCIe support fot MT7622.
Signed-off-by: Ryder Lee <ryder.lee-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 10 ++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 74 ++++++++++++++++++++++++++++
2 files changed, 84 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index b80e8c7..1007932 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -54,6 +54,16 @@
};
};
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_pins>;
+ status = "okay";
+
+ pcie@0,0 {
+ status = "okay";
+ };
+};
+
&pio {
/* eMMC is shared pin with parallel NAND */
emmc_pins_default: emmc-pins-default {
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index a3a409b..f0f18b3 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -469,6 +469,80 @@
#reset-cells = <1>;
};
+ pcie: pcie@1a140000 {
+ compatible = "mediatek,mt7622-pcie";
+ device_type = "pci";
+ reg = <0 0x1a140000 0 0x1000>,
+ <0 0x1a143000 0 0x1000>,
+ <0 0x1a145000 0 0x1000>;
+ reg-names = "subsys", "port0", "port1";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
+ <&pciesys CLK_PCIE_P1_MAC_EN>,
+ <&pciesys CLK_PCIE_P0_AHB_EN>,
+ <&pciesys CLK_PCIE_P0_AHB_EN>,
+ <&pciesys CLK_PCIE_P0_AUX_EN>,
+ <&pciesys CLK_PCIE_P1_AUX_EN>,
+ <&pciesys CLK_PCIE_P0_AXI_EN>,
+ <&pciesys CLK_PCIE_P1_AXI_EN>,
+ <&pciesys CLK_PCIE_P0_OBFF_EN>,
+ <&pciesys CLK_PCIE_P1_OBFF_EN>,
+ <&pciesys CLK_PCIE_P0_PIPE_EN>,
+ <&pciesys CLK_PCIE_P1_PIPE_EN>;
+ clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1",
+ "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1",
+ "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1";
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
+ status = "disabled";
+
+ pcie0: pcie@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ num-lanes = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+ pcie_intc0: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pcie1: pcie@1,0 {
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ num-lanes = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ pcie_intc1: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+
ethsys: syscon@1b000000 {
compatible = "mediatek,mt7622-ethsys",
"syscon";
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 85+ messages in thread
* [PATCH v2 12/16] arm64: dts: mt7622: add SATA device nodes
@ 2018-02-06 9:53 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang @ 2018-02-06 9:53 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel, Ryder Lee, Sean Wang
From: Ryder Lee <ryder.lee@mediatek.com>
This patch adds SATA support fot MT7622.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 8 ++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 40 ++++++++++++++++++++++++++++
2 files changed, 48 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 1007932..87b6080 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -323,6 +323,14 @@
status = "okay";
};
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+};
+
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spic0_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index f0f18b3..d5ca0a8 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/mt7622-clk.h>
+#include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/mt7622-power.h>
#include <dt-bindings/reset/mt7622-reset.h>
@@ -543,6 +544,45 @@
};
};
+ sata: sata@1a200000 {
+ compatible = "mediatek,mt7622-ahci",
+ "mediatek,mtk-ahci";
+ reg = <0 0x1a200000 0 0x1100>;
+ interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hostc";
+ clocks = <&pciesys CLK_SATA_AHB_EN>,
+ <&pciesys CLK_SATA_AXI_EN>,
+ <&pciesys CLK_SATA_ASIC_EN>,
+ <&pciesys CLK_SATA_RBC_EN>,
+ <&pciesys CLK_SATA_PM_EN>;
+ clock-names = "ahb", "axi", "asic", "rbc", "pm";
+ phys = <&sata_port PHY_TYPE_SATA>;
+ phy-names = "sata-phy";
+ ports-implemented = <0x1>;
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+ resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
+ <&pciesys MT7622_SATA_PHY_SW_RST>,
+ <&pciesys MT7622_SATA_PHY_REG_RST>;
+ reset-names = "axi", "sw", "reg";
+ mediatek,phy-mode = <&pciesys>;
+ status = "disabled";
+ };
+
+ sata_phy: sata-phy@1a243000 {
+ compatible = "mediatek,generic-tphy-v1";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ sata_port: sata-phy@1a243000 {
+ reg = <0 0x1a243000 0 0x0100>;
+ clocks = <&topckgen CLK_TOP_ETH_500M>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ };
+ };
+
ethsys: syscon@1b000000 {
compatible = "mediatek,mt7622-ethsys",
"syscon";
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 12/16] arm64: dts: mt7622: add SATA device nodes
@ 2018-02-06 9:53 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang at mediatek.com @ 2018-02-06 9:53 UTC (permalink / raw)
To: linux-arm-kernel
From: Ryder Lee <ryder.lee@mediatek.com>
This patch adds SATA support fot MT7622.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 8 ++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 40 ++++++++++++++++++++++++++++
2 files changed, 48 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 1007932..87b6080 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -323,6 +323,14 @@
status = "okay";
};
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+};
+
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spic0_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index f0f18b3..d5ca0a8 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/mt7622-clk.h>
+#include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/mt7622-power.h>
#include <dt-bindings/reset/mt7622-reset.h>
@@ -543,6 +544,45 @@
};
};
+ sata: sata at 1a200000 {
+ compatible = "mediatek,mt7622-ahci",
+ "mediatek,mtk-ahci";
+ reg = <0 0x1a200000 0 0x1100>;
+ interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hostc";
+ clocks = <&pciesys CLK_SATA_AHB_EN>,
+ <&pciesys CLK_SATA_AXI_EN>,
+ <&pciesys CLK_SATA_ASIC_EN>,
+ <&pciesys CLK_SATA_RBC_EN>,
+ <&pciesys CLK_SATA_PM_EN>;
+ clock-names = "ahb", "axi", "asic", "rbc", "pm";
+ phys = <&sata_port PHY_TYPE_SATA>;
+ phy-names = "sata-phy";
+ ports-implemented = <0x1>;
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+ resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
+ <&pciesys MT7622_SATA_PHY_SW_RST>,
+ <&pciesys MT7622_SATA_PHY_REG_RST>;
+ reset-names = "axi", "sw", "reg";
+ mediatek,phy-mode = <&pciesys>;
+ status = "disabled";
+ };
+
+ sata_phy: sata-phy at 1a243000 {
+ compatible = "mediatek,generic-tphy-v1";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ sata_port: sata-phy at 1a243000 {
+ reg = <0 0x1a243000 0 0x0100>;
+ clocks = <&topckgen CLK_TOP_ETH_500M>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ };
+ };
+
ethsys: syscon at 1b000000 {
compatible = "mediatek,mt7622-ethsys",
"syscon";
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 12/16] arm64: dts: mt7622: add SATA device nodes
@ 2018-02-06 9:53 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2018-02-06 9:53 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Ryder Lee, Sean Wang
From: Ryder Lee <ryder.lee-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
This patch adds SATA support fot MT7622.
Signed-off-by: Ryder Lee <ryder.lee-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 8 ++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 40 ++++++++++++++++++++++++++++
2 files changed, 48 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 1007932..87b6080 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -323,6 +323,14 @@
status = "okay";
};
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+};
+
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spic0_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index f0f18b3..d5ca0a8 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/mt7622-clk.h>
+#include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/mt7622-power.h>
#include <dt-bindings/reset/mt7622-reset.h>
@@ -543,6 +544,45 @@
};
};
+ sata: sata@1a200000 {
+ compatible = "mediatek,mt7622-ahci",
+ "mediatek,mtk-ahci";
+ reg = <0 0x1a200000 0 0x1100>;
+ interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hostc";
+ clocks = <&pciesys CLK_SATA_AHB_EN>,
+ <&pciesys CLK_SATA_AXI_EN>,
+ <&pciesys CLK_SATA_ASIC_EN>,
+ <&pciesys CLK_SATA_RBC_EN>,
+ <&pciesys CLK_SATA_PM_EN>;
+ clock-names = "ahb", "axi", "asic", "rbc", "pm";
+ phys = <&sata_port PHY_TYPE_SATA>;
+ phy-names = "sata-phy";
+ ports-implemented = <0x1>;
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+ resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
+ <&pciesys MT7622_SATA_PHY_SW_RST>,
+ <&pciesys MT7622_SATA_PHY_REG_RST>;
+ reset-names = "axi", "sw", "reg";
+ mediatek,phy-mode = <&pciesys>;
+ status = "disabled";
+ };
+
+ sata_phy: sata-phy@1a243000 {
+ compatible = "mediatek,generic-tphy-v1";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ sata_port: sata-phy@1a243000 {
+ reg = <0 0x1a243000 0 0x0100>;
+ clocks = <&topckgen CLK_TOP_ETH_500M>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ };
+ };
+
ethsys: syscon@1b000000 {
compatible = "mediatek,mt7622-ethsys",
"syscon";
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 85+ messages in thread
* [PATCH v2 13/16] arm64: dts: mt7622: add usb device nodes
@ 2018-02-06 9:53 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang @ 2018-02-06 9:53 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel, Chunfeng Yun, Sean Wang
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
add xhci node and usb3 phy nodes
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Jumin Li <jumin.li@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 28 +++++++++++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 51 ++++++++++++++++++++++++++++
2 files changed, 79 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 87b6080..5746cb3 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -52,6 +52,24 @@
memory {
reg = <0 0x40000000 0 0x3F000000>;
};
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
&pcie {
@@ -343,6 +361,16 @@
status = "okay";
};
+&ssusb {
+ vusb33-supply = <®_3p3v>;
+ vbus-supply = <®_5v>;
+ status = "okay";
+};
+
+&u3phy {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index d5ca0a8..e6dd4f6 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -462,6 +462,57 @@
#reset-cells = <1>;
};
+ ssusb: usb@1a0c0000 {
+ compatible = "mediatek,mt7622-xhci",
+ "mediatek,mtk-xhci";
+ reg = <0 0x1a0c0000 0 0x01000>,
+ <0 0x1a0c4700 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>;
+ clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
+ <&ssusbsys CLK_SSUSB_REF_EN>,
+ <&ssusbsys CLK_SSUSB_MCU_EN>,
+ <&ssusbsys CLK_SSUSB_DMA_EN>;
+ clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+ phys = <&u2port0 PHY_TYPE_USB2>,
+ <&u3port0 PHY_TYPE_USB3>,
+ <&u2port1 PHY_TYPE_USB2>;
+
+ status = "disabled";
+ };
+
+ u3phy: usb-phy@1a0c4000 {
+ compatible = "mediatek,mt7622-u3phy",
+ "mediatek,generic-tphy-v1";
+ reg = <0 0x1a0c4000 0 0x700>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ u2port0: usb-phy@1a0c4800 {
+ reg = <0 0x1a0c4800 0 0x0100>;
+ #phy-cells = <1>;
+ clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
+ clock-names = "ref";
+ };
+
+ u3port0: usb-phy@1a0c4900 {
+ reg = <0 0x1a0c4900 0 0x0700>;
+ #phy-cells = <1>;
+ clocks = <&clk25m>;
+ clock-names = "ref";
+ };
+
+ u2port1: usb-phy@1a0c5000 {
+ reg = <0 0x1a0c5000 0 0x0100>;
+ #phy-cells = <1>;
+ clocks = <&ssusbsys CLK_SSUSB_U2_PHY_1P_EN>;
+ clock-names = "ref";
+ };
+ };
+
pciesys: pciesys@1a100800 {
compatible = "mediatek,mt7622-pciesys",
"syscon";
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 13/16] arm64: dts: mt7622: add usb device nodes
@ 2018-02-06 9:53 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang at mediatek.com @ 2018-02-06 9:53 UTC (permalink / raw)
To: linux-arm-kernel
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
add xhci node and usb3 phy nodes
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Jumin Li <jumin.li@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 28 +++++++++++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 51 ++++++++++++++++++++++++++++
2 files changed, 79 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 87b6080..5746cb3 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -52,6 +52,24 @@
memory {
reg = <0 0x40000000 0 0x3F000000>;
};
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
&pcie {
@@ -343,6 +361,16 @@
status = "okay";
};
+&ssusb {
+ vusb33-supply = <®_3p3v>;
+ vbus-supply = <®_5v>;
+ status = "okay";
+};
+
+&u3phy {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index d5ca0a8..e6dd4f6 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -462,6 +462,57 @@
#reset-cells = <1>;
};
+ ssusb: usb at 1a0c0000 {
+ compatible = "mediatek,mt7622-xhci",
+ "mediatek,mtk-xhci";
+ reg = <0 0x1a0c0000 0 0x01000>,
+ <0 0x1a0c4700 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>;
+ clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
+ <&ssusbsys CLK_SSUSB_REF_EN>,
+ <&ssusbsys CLK_SSUSB_MCU_EN>,
+ <&ssusbsys CLK_SSUSB_DMA_EN>;
+ clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+ phys = <&u2port0 PHY_TYPE_USB2>,
+ <&u3port0 PHY_TYPE_USB3>,
+ <&u2port1 PHY_TYPE_USB2>;
+
+ status = "disabled";
+ };
+
+ u3phy: usb-phy at 1a0c4000 {
+ compatible = "mediatek,mt7622-u3phy",
+ "mediatek,generic-tphy-v1";
+ reg = <0 0x1a0c4000 0 0x700>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ u2port0: usb-phy at 1a0c4800 {
+ reg = <0 0x1a0c4800 0 0x0100>;
+ #phy-cells = <1>;
+ clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
+ clock-names = "ref";
+ };
+
+ u3port0: usb-phy at 1a0c4900 {
+ reg = <0 0x1a0c4900 0 0x0700>;
+ #phy-cells = <1>;
+ clocks = <&clk25m>;
+ clock-names = "ref";
+ };
+
+ u2port1: usb-phy at 1a0c5000 {
+ reg = <0 0x1a0c5000 0 0x0100>;
+ #phy-cells = <1>;
+ clocks = <&ssusbsys CLK_SSUSB_U2_PHY_1P_EN>;
+ clock-names = "ref";
+ };
+ };
+
pciesys: pciesys at 1a100800 {
compatible = "mediatek,mt7622-pciesys",
"syscon";
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 13/16] arm64: dts: mt7622: add usb device nodes
@ 2018-02-06 9:53 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2018-02-06 9:53 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Chunfeng Yun, Sean Wang
From: Chunfeng Yun <chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
add xhci node and usb3 phy nodes
Signed-off-by: Chunfeng Yun <chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Tested-by: Jumin Li <jumin.li-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 28 +++++++++++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 51 ++++++++++++++++++++++++++++
2 files changed, 79 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 87b6080..5746cb3 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -52,6 +52,24 @@
memory {
reg = <0 0x40000000 0 0x3F000000>;
};
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
&pcie {
@@ -343,6 +361,16 @@
status = "okay";
};
+&ssusb {
+ vusb33-supply = <®_3p3v>;
+ vbus-supply = <®_5v>;
+ status = "okay";
+};
+
+&u3phy {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index d5ca0a8..e6dd4f6 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -462,6 +462,57 @@
#reset-cells = <1>;
};
+ ssusb: usb@1a0c0000 {
+ compatible = "mediatek,mt7622-xhci",
+ "mediatek,mtk-xhci";
+ reg = <0 0x1a0c0000 0 0x01000>,
+ <0 0x1a0c4700 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>;
+ clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
+ <&ssusbsys CLK_SSUSB_REF_EN>,
+ <&ssusbsys CLK_SSUSB_MCU_EN>,
+ <&ssusbsys CLK_SSUSB_DMA_EN>;
+ clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+ phys = <&u2port0 PHY_TYPE_USB2>,
+ <&u3port0 PHY_TYPE_USB3>,
+ <&u2port1 PHY_TYPE_USB2>;
+
+ status = "disabled";
+ };
+
+ u3phy: usb-phy@1a0c4000 {
+ compatible = "mediatek,mt7622-u3phy",
+ "mediatek,generic-tphy-v1";
+ reg = <0 0x1a0c4000 0 0x700>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ u2port0: usb-phy@1a0c4800 {
+ reg = <0 0x1a0c4800 0 0x0100>;
+ #phy-cells = <1>;
+ clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
+ clock-names = "ref";
+ };
+
+ u3port0: usb-phy@1a0c4900 {
+ reg = <0 0x1a0c4900 0 0x0700>;
+ #phy-cells = <1>;
+ clocks = <&clk25m>;
+ clock-names = "ref";
+ };
+
+ u2port1: usb-phy@1a0c5000 {
+ reg = <0 0x1a0c5000 0 0x0100>;
+ #phy-cells = <1>;
+ clocks = <&ssusbsys CLK_SSUSB_U2_PHY_1P_EN>;
+ clock-names = "ref";
+ };
+ };
+
pciesys: pciesys@1a100800 {
compatible = "mediatek,mt7622-pciesys",
"syscon";
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 85+ messages in thread
* [PATCH v2 14/16] arm64: dts: mt7622: add thermal and related nodes
2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
(?)
@ 2018-02-06 9:53 ` sean.wang
-1 siblings, 0 replies; 85+ messages in thread
From: sean.wang @ 2018-02-06 9:53 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel, Sean Wang
From: Sean Wang <sean.wang@mediatek.com>
add nodes for the thermal controller and associated thermal zone using
CPU as the cooling device for each trip point. In addition, add a fixup
for thermal_calibration on nvmem should be 12 bytes as the minimal
requirement.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 72 +++++++++++++++++++++++++++++++-
1 file changed, 71 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index e6dd4f6..6cf67dd 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/mt7622-power.h>
#include <dt-bindings/reset/mt7622-reset.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "mediatek,mt7622";
@@ -75,6 +76,7 @@
<&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
clock-names = "cpu", "intermediate";
operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
enable-method = "psci";
clock-frequency = <1300000000>;
};
@@ -119,6 +121,58 @@
};
};
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&thermal 0>;
+
+ trips {
+ cpu_passive: cpu-passive {
+ temperature = <47000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_active: cpu-active {
+ temperature = <67000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_hot: cpu-hot {
+ temperature = <87000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu-crit {
+ temperature = <107000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_passive>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&cpu_active>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map2 {
+ trip = <&cpu_hot>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
@@ -201,7 +255,7 @@
#size-cells = <1>;
thermal_calibration: calib@198 {
- reg = <0x198 0x8>;
+ reg = <0x198 0xc>;
};
};
@@ -384,6 +438,22 @@
status = "disabled";
};
+ thermal: thermal@1100b000 {
+ #thermal-sensor-cells = <1>;
+ compatible = "mediatek,mt7622-thermal";
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <0 78 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_THERM_PD>,
+ <&pericfg CLK_PERI_AUXADC_PD>;
+ clock-names = "therm", "auxadc";
+ resets = <&pericfg MT7622_PERI_THERM_SW_RST>;
+ reset-names = "therm";
+ mediatek,auxadc = <&auxadc>;
+ mediatek,apmixedsys = <&apmixedsys>;
+ nvmem-cells = <&thermal_calibration>;
+ nvmem-cell-names = "calibration-data";
+ };
+
btif: serial@1100c000 {
compatible = "mediatek,mt7622-btif",
"mediatek,mtk-btif";
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 14/16] arm64: dts: mt7622: add thermal and related nodes
@ 2018-02-06 9:53 ` sean.wang
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang at mediatek.com @ 2018-02-06 9:53 UTC (permalink / raw)
To: linux-arm-kernel
From: Sean Wang <sean.wang@mediatek.com>
add nodes for the thermal controller and associated thermal zone using
CPU as the cooling device for each trip point. In addition, add a fixup
for thermal_calibration on nvmem should be 12 bytes as the minimal
requirement.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 72 +++++++++++++++++++++++++++++++-
1 file changed, 71 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index e6dd4f6..6cf67dd 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/mt7622-power.h>
#include <dt-bindings/reset/mt7622-reset.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "mediatek,mt7622";
@@ -75,6 +76,7 @@
<&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
clock-names = "cpu", "intermediate";
operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
enable-method = "psci";
clock-frequency = <1300000000>;
};
@@ -119,6 +121,58 @@
};
};
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&thermal 0>;
+
+ trips {
+ cpu_passive: cpu-passive {
+ temperature = <47000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_active: cpu-active {
+ temperature = <67000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_hot: cpu-hot {
+ temperature = <87000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu-crit {
+ temperature = <107000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_passive>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&cpu_active>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map2 {
+ trip = <&cpu_hot>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
@@ -201,7 +255,7 @@
#size-cells = <1>;
thermal_calibration: calib at 198 {
- reg = <0x198 0x8>;
+ reg = <0x198 0xc>;
};
};
@@ -384,6 +438,22 @@
status = "disabled";
};
+ thermal: thermal at 1100b000 {
+ #thermal-sensor-cells = <1>;
+ compatible = "mediatek,mt7622-thermal";
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <0 78 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_THERM_PD>,
+ <&pericfg CLK_PERI_AUXADC_PD>;
+ clock-names = "therm", "auxadc";
+ resets = <&pericfg MT7622_PERI_THERM_SW_RST>;
+ reset-names = "therm";
+ mediatek,auxadc = <&auxadc>;
+ mediatek,apmixedsys = <&apmixedsys>;
+ nvmem-cells = <&thermal_calibration>;
+ nvmem-cell-names = "calibration-data";
+ };
+
btif: serial at 1100c000 {
compatible = "mediatek,mt7622-btif",
"mediatek,mtk-btif";
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 14/16] arm64: dts: mt7622: add thermal and related nodes
@ 2018-02-06 9:53 ` sean.wang
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang @ 2018-02-06 9:53 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel, Sean Wang
From: Sean Wang <sean.wang@mediatek.com>
add nodes for the thermal controller and associated thermal zone using
CPU as the cooling device for each trip point. In addition, add a fixup
for thermal_calibration on nvmem should be 12 bytes as the minimal
requirement.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 72 +++++++++++++++++++++++++++++++-
1 file changed, 71 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index e6dd4f6..6cf67dd 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/mt7622-power.h>
#include <dt-bindings/reset/mt7622-reset.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "mediatek,mt7622";
@@ -75,6 +76,7 @@
<&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
clock-names = "cpu", "intermediate";
operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
enable-method = "psci";
clock-frequency = <1300000000>;
};
@@ -119,6 +121,58 @@
};
};
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&thermal 0>;
+
+ trips {
+ cpu_passive: cpu-passive {
+ temperature = <47000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_active: cpu-active {
+ temperature = <67000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_hot: cpu-hot {
+ temperature = <87000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu-crit {
+ temperature = <107000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_passive>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&cpu_active>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map2 {
+ trip = <&cpu_hot>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
@@ -201,7 +255,7 @@
#size-cells = <1>;
thermal_calibration: calib@198 {
- reg = <0x198 0x8>;
+ reg = <0x198 0xc>;
};
};
@@ -384,6 +438,22 @@
status = "disabled";
};
+ thermal: thermal@1100b000 {
+ #thermal-sensor-cells = <1>;
+ compatible = "mediatek,mt7622-thermal";
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <0 78 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_THERM_PD>,
+ <&pericfg CLK_PERI_AUXADC_PD>;
+ clock-names = "therm", "auxadc";
+ resets = <&pericfg MT7622_PERI_THERM_SW_RST>;
+ reset-names = "therm";
+ mediatek,auxadc = <&auxadc>;
+ mediatek,apmixedsys = <&apmixedsys>;
+ nvmem-cells = <&thermal_calibration>;
+ nvmem-cell-names = "calibration-data";
+ };
+
btif: serial@1100c000 {
compatible = "mediatek,mt7622-btif",
"mediatek,mtk-btif";
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* Re: [PATCH v2 14/16] arm64: dts: mt7622: add thermal and related nodes
@ 2018-02-07 11:43 ` Matthias Brugger
0 siblings, 0 replies; 85+ messages in thread
From: Matthias Brugger @ 2018-02-07 11:43 UTC (permalink / raw)
To: sean.wang, robh+dt, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel
On 02/06/2018 10:53 AM, sean.wang@mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
>
> add nodes for the thermal controller and associated thermal zone using
> CPU as the cooling device for each trip point. In addition, add a fixup
> for thermal_calibration on nvmem should be 12 bytes as the minimal
> requirement.
>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/mt7622.dtsi | 72 +++++++++++++++++++++++++++++++-
> 1 file changed, 71 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> index e6dd4f6..6cf67dd 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> @@ -12,6 +12,7 @@
> #include <dt-bindings/phy/phy.h>
> #include <dt-bindings/power/mt7622-power.h>
> #include <dt-bindings/reset/mt7622-reset.h>
> +#include <dt-bindings/thermal/thermal.h>
>
> / {
> compatible = "mediatek,mt7622";
> @@ -75,6 +76,7 @@
> <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
> clock-names = "cpu", "intermediate";
> operating-points-v2 = <&cpu_opp_table>;
> + #cooling-cells = <2>;
> enable-method = "psci";
> clock-frequency = <1300000000>;
> };
> @@ -119,6 +121,58 @@
> };
> };
>
> + thermal-zones {
> + cpu_thermal: cpu-thermal {
> + polling-delay-passive = <1000>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&thermal 0>;
> +
> + trips {
> + cpu_passive: cpu-passive {
> + temperature = <47000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_active: cpu-active {
> + temperature = <67000>;
> + hysteresis = <2000>;
> + type = "active";
> + };
> +
> + cpu_hot: cpu-hot {
> + temperature = <87000>;
> + hysteresis = <2000>;
> + type = "hot";
> + };
> +
> + cpu-crit {
> + temperature = <107000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu_passive>;
> + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> +
> + map1 {
> + trip = <&cpu_active>;
> + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> +
> + map2 {
> + trip = <&cpu_hot>;
> + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> + };
> +
> timer {
> compatible = "arm,armv8-timer";
> interrupt-parent = <&gic>;
> @@ -201,7 +255,7 @@
> #size-cells = <1>;
>
> thermal_calibration: calib@198 {
> - reg = <0x198 0x8>;
> + reg = <0x198 0xc>;
Any reason why this is not part of patch 8/16?
Regards,
Matthias
^ permalink raw reply [flat|nested] 85+ messages in thread* [PATCH v2 14/16] arm64: dts: mt7622: add thermal and related nodes
@ 2018-02-07 11:43 ` Matthias Brugger
0 siblings, 0 replies; 85+ messages in thread
From: Matthias Brugger @ 2018-02-07 11:43 UTC (permalink / raw)
To: linux-arm-kernel
On 02/06/2018 10:53 AM, sean.wang at mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
>
> add nodes for the thermal controller and associated thermal zone using
> CPU as the cooling device for each trip point. In addition, add a fixup
> for thermal_calibration on nvmem should be 12 bytes as the minimal
> requirement.
>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/mt7622.dtsi | 72 +++++++++++++++++++++++++++++++-
> 1 file changed, 71 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> index e6dd4f6..6cf67dd 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> @@ -12,6 +12,7 @@
> #include <dt-bindings/phy/phy.h>
> #include <dt-bindings/power/mt7622-power.h>
> #include <dt-bindings/reset/mt7622-reset.h>
> +#include <dt-bindings/thermal/thermal.h>
>
> / {
> compatible = "mediatek,mt7622";
> @@ -75,6 +76,7 @@
> <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
> clock-names = "cpu", "intermediate";
> operating-points-v2 = <&cpu_opp_table>;
> + #cooling-cells = <2>;
> enable-method = "psci";
> clock-frequency = <1300000000>;
> };
> @@ -119,6 +121,58 @@
> };
> };
>
> + thermal-zones {
> + cpu_thermal: cpu-thermal {
> + polling-delay-passive = <1000>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&thermal 0>;
> +
> + trips {
> + cpu_passive: cpu-passive {
> + temperature = <47000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_active: cpu-active {
> + temperature = <67000>;
> + hysteresis = <2000>;
> + type = "active";
> + };
> +
> + cpu_hot: cpu-hot {
> + temperature = <87000>;
> + hysteresis = <2000>;
> + type = "hot";
> + };
> +
> + cpu-crit {
> + temperature = <107000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu_passive>;
> + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> +
> + map1 {
> + trip = <&cpu_active>;
> + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> +
> + map2 {
> + trip = <&cpu_hot>;
> + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> + };
> +
> timer {
> compatible = "arm,armv8-timer";
> interrupt-parent = <&gic>;
> @@ -201,7 +255,7 @@
> #size-cells = <1>;
>
> thermal_calibration: calib at 198 {
> - reg = <0x198 0x8>;
> + reg = <0x198 0xc>;
Any reason why this is not part of patch 8/16?
Regards,
Matthias
^ permalink raw reply [flat|nested] 85+ messages in thread* Re: [PATCH v2 14/16] arm64: dts: mt7622: add thermal and related nodes
@ 2018-02-07 11:43 ` Matthias Brugger
0 siblings, 0 replies; 85+ messages in thread
From: Matthias Brugger @ 2018-02-07 11:43 UTC (permalink / raw)
To: sean.wang-NuS5LvNUpcJWk0Htik3J/w, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
mark.rutland-5wv7dgnIgG8, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
On 02/06/2018 10:53 AM, sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org wrote:
> From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
>
> add nodes for the thermal controller and associated thermal zone using
> CPU as the cooling device for each trip point. In addition, add a fixup
> for thermal_calibration on nvmem should be 12 bytes as the minimal
> requirement.
>
> Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> ---
> arch/arm64/boot/dts/mediatek/mt7622.dtsi | 72 +++++++++++++++++++++++++++++++-
> 1 file changed, 71 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> index e6dd4f6..6cf67dd 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> @@ -12,6 +12,7 @@
> #include <dt-bindings/phy/phy.h>
> #include <dt-bindings/power/mt7622-power.h>
> #include <dt-bindings/reset/mt7622-reset.h>
> +#include <dt-bindings/thermal/thermal.h>
>
> / {
> compatible = "mediatek,mt7622";
> @@ -75,6 +76,7 @@
> <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
> clock-names = "cpu", "intermediate";
> operating-points-v2 = <&cpu_opp_table>;
> + #cooling-cells = <2>;
> enable-method = "psci";
> clock-frequency = <1300000000>;
> };
> @@ -119,6 +121,58 @@
> };
> };
>
> + thermal-zones {
> + cpu_thermal: cpu-thermal {
> + polling-delay-passive = <1000>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&thermal 0>;
> +
> + trips {
> + cpu_passive: cpu-passive {
> + temperature = <47000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_active: cpu-active {
> + temperature = <67000>;
> + hysteresis = <2000>;
> + type = "active";
> + };
> +
> + cpu_hot: cpu-hot {
> + temperature = <87000>;
> + hysteresis = <2000>;
> + type = "hot";
> + };
> +
> + cpu-crit {
> + temperature = <107000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu_passive>;
> + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> +
> + map1 {
> + trip = <&cpu_active>;
> + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> +
> + map2 {
> + trip = <&cpu_hot>;
> + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> + };
> +
> timer {
> compatible = "arm,armv8-timer";
> interrupt-parent = <&gic>;
> @@ -201,7 +255,7 @@
> #size-cells = <1>;
>
> thermal_calibration: calib@198 {
> - reg = <0x198 0x8>;
> + reg = <0x198 0xc>;
Any reason why this is not part of patch 8/16?
Regards,
Matthias
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 85+ messages in thread* Re: [PATCH v2 14/16] arm64: dts: mt7622: add thermal and related nodes
2018-02-07 11:43 ` Matthias Brugger
(?)
@ 2018-02-09 3:51 ` Sean Wang
-1 siblings, 0 replies; 85+ messages in thread
From: Sean Wang @ 2018-02-09 3:51 UTC (permalink / raw)
To: Matthias Brugger
Cc: robh+dt, mark.rutland, devicetree, linux-mediatek,
linux-arm-kernel, linux-kernel
On Wed, 2018-02-07 at 12:43 +0100, Matthias Brugger wrote:
>
> On 02/06/2018 10:53 AM, sean.wang@mediatek.com wrote:
> > From: Sean Wang <sean.wang@mediatek.com>
> >
> > add nodes for the thermal controller and associated thermal zone using
> > CPU as the cooling device for each trip point. In addition, add a fixup
> > for thermal_calibration on nvmem should be 12 bytes as the minimal
> > requirement.
> >
> > Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> > ---
> > arch/arm64/boot/dts/mediatek/mt7622.dtsi | 72 +++++++++++++++++++++++++++++++-
> > 1 file changed, 71 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > index e6dd4f6..6cf67dd 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > @@ -12,6 +12,7 @@
> > #include <dt-bindings/phy/phy.h>
> > #include <dt-bindings/power/mt7622-power.h>
> > #include <dt-bindings/reset/mt7622-reset.h>
> > +#include <dt-bindings/thermal/thermal.h>
> >
> > / {
> > compatible = "mediatek,mt7622";
> > @@ -75,6 +76,7 @@
> > <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
> > clock-names = "cpu", "intermediate";
> > operating-points-v2 = <&cpu_opp_table>;
> > + #cooling-cells = <2>;
> > enable-method = "psci";
> > clock-frequency = <1300000000>;
> > };
> > @@ -119,6 +121,58 @@
> > };
> > };
> >
> > + thermal-zones {
> > + cpu_thermal: cpu-thermal {
> > + polling-delay-passive = <1000>;
> > + polling-delay = <1000>;
> > +
> > + thermal-sensors = <&thermal 0>;
> > +
> > + trips {
> > + cpu_passive: cpu-passive {
> > + temperature = <47000>;
> > + hysteresis = <2000>;
> > + type = "passive";
> > + };
> > +
> > + cpu_active: cpu-active {
> > + temperature = <67000>;
> > + hysteresis = <2000>;
> > + type = "active";
> > + };
> > +
> > + cpu_hot: cpu-hot {
> > + temperature = <87000>;
> > + hysteresis = <2000>;
> > + type = "hot";
> > + };
> > +
> > + cpu-crit {
> > + temperature = <107000>;
> > + hysteresis = <2000>;
> > + type = "critical";
> > + };
> > + };
> > +
> > + cooling-maps {
> > + map0 {
> > + trip = <&cpu_passive>;
> > + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > + };
> > +
> > + map1 {
> > + trip = <&cpu_active>;
> > + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > + };
> > +
> > + map2 {
> > + trip = <&cpu_hot>;
> > + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > + };
> > + };
> > + };
> > + };
> > +
> > timer {
> > compatible = "arm,armv8-timer";
> > interrupt-parent = <&gic>;
> > @@ -201,7 +255,7 @@
> > #size-cells = <1>;
> >
> > thermal_calibration: calib@198 {
> > - reg = <0x198 0x8>;
> > + reg = <0x198 0xc>;
>
> Any reason why this is not part of patch 8/16?
>
There's no strong reason wanting me to do that. patch 8 has contained a
lot of nodes and patch 16 is present just in v2. So, I felt it should be
a little bit easy that people reviews those patches if they are put into
separate patches. But, It's still fine to make them into one in the next
version.
> Regards,
> Matthias
>
^ permalink raw reply [flat|nested] 85+ messages in thread* [PATCH v2 14/16] arm64: dts: mt7622: add thermal and related nodes
@ 2018-02-09 3:51 ` Sean Wang
0 siblings, 0 replies; 85+ messages in thread
From: Sean Wang @ 2018-02-09 3:51 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 2018-02-07 at 12:43 +0100, Matthias Brugger wrote:
>
> On 02/06/2018 10:53 AM, sean.wang at mediatek.com wrote:
> > From: Sean Wang <sean.wang@mediatek.com>
> >
> > add nodes for the thermal controller and associated thermal zone using
> > CPU as the cooling device for each trip point. In addition, add a fixup
> > for thermal_calibration on nvmem should be 12 bytes as the minimal
> > requirement.
> >
> > Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> > ---
> > arch/arm64/boot/dts/mediatek/mt7622.dtsi | 72 +++++++++++++++++++++++++++++++-
> > 1 file changed, 71 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > index e6dd4f6..6cf67dd 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > @@ -12,6 +12,7 @@
> > #include <dt-bindings/phy/phy.h>
> > #include <dt-bindings/power/mt7622-power.h>
> > #include <dt-bindings/reset/mt7622-reset.h>
> > +#include <dt-bindings/thermal/thermal.h>
> >
> > / {
> > compatible = "mediatek,mt7622";
> > @@ -75,6 +76,7 @@
> > <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
> > clock-names = "cpu", "intermediate";
> > operating-points-v2 = <&cpu_opp_table>;
> > + #cooling-cells = <2>;
> > enable-method = "psci";
> > clock-frequency = <1300000000>;
> > };
> > @@ -119,6 +121,58 @@
> > };
> > };
> >
> > + thermal-zones {
> > + cpu_thermal: cpu-thermal {
> > + polling-delay-passive = <1000>;
> > + polling-delay = <1000>;
> > +
> > + thermal-sensors = <&thermal 0>;
> > +
> > + trips {
> > + cpu_passive: cpu-passive {
> > + temperature = <47000>;
> > + hysteresis = <2000>;
> > + type = "passive";
> > + };
> > +
> > + cpu_active: cpu-active {
> > + temperature = <67000>;
> > + hysteresis = <2000>;
> > + type = "active";
> > + };
> > +
> > + cpu_hot: cpu-hot {
> > + temperature = <87000>;
> > + hysteresis = <2000>;
> > + type = "hot";
> > + };
> > +
> > + cpu-crit {
> > + temperature = <107000>;
> > + hysteresis = <2000>;
> > + type = "critical";
> > + };
> > + };
> > +
> > + cooling-maps {
> > + map0 {
> > + trip = <&cpu_passive>;
> > + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > + };
> > +
> > + map1 {
> > + trip = <&cpu_active>;
> > + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > + };
> > +
> > + map2 {
> > + trip = <&cpu_hot>;
> > + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > + };
> > + };
> > + };
> > + };
> > +
> > timer {
> > compatible = "arm,armv8-timer";
> > interrupt-parent = <&gic>;
> > @@ -201,7 +255,7 @@
> > #size-cells = <1>;
> >
> > thermal_calibration: calib at 198 {
> > - reg = <0x198 0x8>;
> > + reg = <0x198 0xc>;
>
> Any reason why this is not part of patch 8/16?
>
There's no strong reason wanting me to do that. patch 8 has contained a
lot of nodes and patch 16 is present just in v2. So, I felt it should be
a little bit easy that people reviews those patches if they are put into
separate patches. But, It's still fine to make them into one in the next
version.
> Regards,
> Matthias
>
^ permalink raw reply [flat|nested] 85+ messages in thread* Re: [PATCH v2 14/16] arm64: dts: mt7622: add thermal and related nodes
@ 2018-02-09 3:51 ` Sean Wang
0 siblings, 0 replies; 85+ messages in thread
From: Sean Wang @ 2018-02-09 3:51 UTC (permalink / raw)
To: Matthias Brugger
Cc: robh+dt, mark.rutland, devicetree, linux-mediatek,
linux-arm-kernel, linux-kernel
On Wed, 2018-02-07 at 12:43 +0100, Matthias Brugger wrote:
>
> On 02/06/2018 10:53 AM, sean.wang@mediatek.com wrote:
> > From: Sean Wang <sean.wang@mediatek.com>
> >
> > add nodes for the thermal controller and associated thermal zone using
> > CPU as the cooling device for each trip point. In addition, add a fixup
> > for thermal_calibration on nvmem should be 12 bytes as the minimal
> > requirement.
> >
> > Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> > ---
> > arch/arm64/boot/dts/mediatek/mt7622.dtsi | 72 +++++++++++++++++++++++++++++++-
> > 1 file changed, 71 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > index e6dd4f6..6cf67dd 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > @@ -12,6 +12,7 @@
> > #include <dt-bindings/phy/phy.h>
> > #include <dt-bindings/power/mt7622-power.h>
> > #include <dt-bindings/reset/mt7622-reset.h>
> > +#include <dt-bindings/thermal/thermal.h>
> >
> > / {
> > compatible = "mediatek,mt7622";
> > @@ -75,6 +76,7 @@
> > <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
> > clock-names = "cpu", "intermediate";
> > operating-points-v2 = <&cpu_opp_table>;
> > + #cooling-cells = <2>;
> > enable-method = "psci";
> > clock-frequency = <1300000000>;
> > };
> > @@ -119,6 +121,58 @@
> > };
> > };
> >
> > + thermal-zones {
> > + cpu_thermal: cpu-thermal {
> > + polling-delay-passive = <1000>;
> > + polling-delay = <1000>;
> > +
> > + thermal-sensors = <&thermal 0>;
> > +
> > + trips {
> > + cpu_passive: cpu-passive {
> > + temperature = <47000>;
> > + hysteresis = <2000>;
> > + type = "passive";
> > + };
> > +
> > + cpu_active: cpu-active {
> > + temperature = <67000>;
> > + hysteresis = <2000>;
> > + type = "active";
> > + };
> > +
> > + cpu_hot: cpu-hot {
> > + temperature = <87000>;
> > + hysteresis = <2000>;
> > + type = "hot";
> > + };
> > +
> > + cpu-crit {
> > + temperature = <107000>;
> > + hysteresis = <2000>;
> > + type = "critical";
> > + };
> > + };
> > +
> > + cooling-maps {
> > + map0 {
> > + trip = <&cpu_passive>;
> > + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > + };
> > +
> > + map1 {
> > + trip = <&cpu_active>;
> > + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > + };
> > +
> > + map2 {
> > + trip = <&cpu_hot>;
> > + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > + };
> > + };
> > + };
> > + };
> > +
> > timer {
> > compatible = "arm,armv8-timer";
> > interrupt-parent = <&gic>;
> > @@ -201,7 +255,7 @@
> > #size-cells = <1>;
> >
> > thermal_calibration: calib@198 {
> > - reg = <0x198 0x8>;
> > + reg = <0x198 0xc>;
>
> Any reason why this is not part of patch 8/16?
>
There's no strong reason wanting me to do that. patch 8 has contained a
lot of nodes and patch 16 is present just in v2. So, I felt it should be
a little bit easy that people reviews those patches if they are put into
separate patches. But, It's still fine to make them into one in the next
version.
> Regards,
> Matthias
>
^ permalink raw reply [flat|nested] 85+ messages in thread* Re: [PATCH v2 14/16] arm64: dts: mt7622: add thermal and related nodes
2018-02-09 3:51 ` Sean Wang
@ 2018-02-12 11:55 ` Matthias Brugger
-1 siblings, 0 replies; 85+ messages in thread
From: Matthias Brugger @ 2018-02-12 11:55 UTC (permalink / raw)
To: Sean Wang
Cc: robh+dt, mark.rutland, devicetree, linux-mediatek,
linux-arm-kernel, linux-kernel
On 02/09/2018 04:51 AM, Sean Wang wrote:
> On Wed, 2018-02-07 at 12:43 +0100, Matthias Brugger wrote:
>>
>> On 02/06/2018 10:53 AM, sean.wang@mediatek.com wrote:
>>> From: Sean Wang <sean.wang@mediatek.com>
>>>
>>> add nodes for the thermal controller and associated thermal zone using
>>> CPU as the cooling device for each trip point. In addition, add a fixup
>>> for thermal_calibration on nvmem should be 12 bytes as the minimal
>>> requirement.
>>>
>>> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
>>> ---
>>> arch/arm64/boot/dts/mediatek/mt7622.dtsi | 72 +++++++++++++++++++++++++++++++-
>>> 1 file changed, 71 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
>>> index e6dd4f6..6cf67dd 100644
>>> --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
>>> +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
>>> @@ -12,6 +12,7 @@
>>> #include <dt-bindings/phy/phy.h>
>>> #include <dt-bindings/power/mt7622-power.h>
>>> #include <dt-bindings/reset/mt7622-reset.h>
>>> +#include <dt-bindings/thermal/thermal.h>
>>>
>>> / {
>>> compatible = "mediatek,mt7622";
>>> @@ -75,6 +76,7 @@
>>> <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
>>> clock-names = "cpu", "intermediate";
>>> operating-points-v2 = <&cpu_opp_table>;
>>> + #cooling-cells = <2>;
>>> enable-method = "psci";
>>> clock-frequency = <1300000000>;
>>> };
>>> @@ -119,6 +121,58 @@
>>> };
>>> };
>>>
>>> + thermal-zones {
>>> + cpu_thermal: cpu-thermal {
>>> + polling-delay-passive = <1000>;
>>> + polling-delay = <1000>;
>>> +
>>> + thermal-sensors = <&thermal 0>;
>>> +
>>> + trips {
>>> + cpu_passive: cpu-passive {
>>> + temperature = <47000>;
>>> + hysteresis = <2000>;
>>> + type = "passive";
>>> + };
>>> +
>>> + cpu_active: cpu-active {
>>> + temperature = <67000>;
>>> + hysteresis = <2000>;
>>> + type = "active";
>>> + };
>>> +
>>> + cpu_hot: cpu-hot {
>>> + temperature = <87000>;
>>> + hysteresis = <2000>;
>>> + type = "hot";
>>> + };
>>> +
>>> + cpu-crit {
>>> + temperature = <107000>;
>>> + hysteresis = <2000>;
>>> + type = "critical";
>>> + };
>>> + };
>>> +
>>> + cooling-maps {
>>> + map0 {
>>> + trip = <&cpu_passive>;
>>> + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>> + };
>>> +
>>> + map1 {
>>> + trip = <&cpu_active>;
>>> + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>> + };
>>> +
>>> + map2 {
>>> + trip = <&cpu_hot>;
>>> + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>> + };
>>> + };
>>> + };
>>> + };
>>> +
>>> timer {
>>> compatible = "arm,armv8-timer";
>>> interrupt-parent = <&gic>;
>>> @@ -201,7 +255,7 @@
>>> #size-cells = <1>;
>>>
>>> thermal_calibration: calib@198 {
>>> - reg = <0x198 0x8>;
>>> + reg = <0x198 0xc>;
>>
>> Any reason why this is not part of patch 8/16?
>>
>
> There's no strong reason wanting me to do that. patch 8 has contained a
> lot of nodes and patch 16 is present just in v2. So, I felt it should be
> a little bit easy that people reviews those patches if they are put into
> separate patches. But, It's still fine to make them into one in the next
> version.
>
Please add it to 8/16 as this is where you define the node in the first place.
Thanks!
^ permalink raw reply [flat|nested] 85+ messages in thread* [PATCH v2 14/16] arm64: dts: mt7622: add thermal and related nodes
@ 2018-02-12 11:55 ` Matthias Brugger
0 siblings, 0 replies; 85+ messages in thread
From: Matthias Brugger @ 2018-02-12 11:55 UTC (permalink / raw)
To: linux-arm-kernel
On 02/09/2018 04:51 AM, Sean Wang wrote:
> On Wed, 2018-02-07 at 12:43 +0100, Matthias Brugger wrote:
>>
>> On 02/06/2018 10:53 AM, sean.wang at mediatek.com wrote:
>>> From: Sean Wang <sean.wang@mediatek.com>
>>>
>>> add nodes for the thermal controller and associated thermal zone using
>>> CPU as the cooling device for each trip point. In addition, add a fixup
>>> for thermal_calibration on nvmem should be 12 bytes as the minimal
>>> requirement.
>>>
>>> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
>>> ---
>>> arch/arm64/boot/dts/mediatek/mt7622.dtsi | 72 +++++++++++++++++++++++++++++++-
>>> 1 file changed, 71 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
>>> index e6dd4f6..6cf67dd 100644
>>> --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
>>> +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
>>> @@ -12,6 +12,7 @@
>>> #include <dt-bindings/phy/phy.h>
>>> #include <dt-bindings/power/mt7622-power.h>
>>> #include <dt-bindings/reset/mt7622-reset.h>
>>> +#include <dt-bindings/thermal/thermal.h>
>>>
>>> / {
>>> compatible = "mediatek,mt7622";
>>> @@ -75,6 +76,7 @@
>>> <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
>>> clock-names = "cpu", "intermediate";
>>> operating-points-v2 = <&cpu_opp_table>;
>>> + #cooling-cells = <2>;
>>> enable-method = "psci";
>>> clock-frequency = <1300000000>;
>>> };
>>> @@ -119,6 +121,58 @@
>>> };
>>> };
>>>
>>> + thermal-zones {
>>> + cpu_thermal: cpu-thermal {
>>> + polling-delay-passive = <1000>;
>>> + polling-delay = <1000>;
>>> +
>>> + thermal-sensors = <&thermal 0>;
>>> +
>>> + trips {
>>> + cpu_passive: cpu-passive {
>>> + temperature = <47000>;
>>> + hysteresis = <2000>;
>>> + type = "passive";
>>> + };
>>> +
>>> + cpu_active: cpu-active {
>>> + temperature = <67000>;
>>> + hysteresis = <2000>;
>>> + type = "active";
>>> + };
>>> +
>>> + cpu_hot: cpu-hot {
>>> + temperature = <87000>;
>>> + hysteresis = <2000>;
>>> + type = "hot";
>>> + };
>>> +
>>> + cpu-crit {
>>> + temperature = <107000>;
>>> + hysteresis = <2000>;
>>> + type = "critical";
>>> + };
>>> + };
>>> +
>>> + cooling-maps {
>>> + map0 {
>>> + trip = <&cpu_passive>;
>>> + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>> + };
>>> +
>>> + map1 {
>>> + trip = <&cpu_active>;
>>> + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>> + };
>>> +
>>> + map2 {
>>> + trip = <&cpu_hot>;
>>> + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>> + };
>>> + };
>>> + };
>>> + };
>>> +
>>> timer {
>>> compatible = "arm,armv8-timer";
>>> interrupt-parent = <&gic>;
>>> @@ -201,7 +255,7 @@
>>> #size-cells = <1>;
>>>
>>> thermal_calibration: calib at 198 {
>>> - reg = <0x198 0x8>;
>>> + reg = <0x198 0xc>;
>>
>> Any reason why this is not part of patch 8/16?
>>
>
> There's no strong reason wanting me to do that. patch 8 has contained a
> lot of nodes and patch 16 is present just in v2. So, I felt it should be
> a little bit easy that people reviews those patches if they are put into
> separate patches. But, It's still fine to make them into one in the next
> version.
>
Please add it to 8/16 as this is where you define the node in the first place.
Thanks!
^ permalink raw reply [flat|nested] 85+ messages in thread
* [PATCH v2 15/16] arm64: dts: mt7622: add High-Speed DMA device nodes
@ 2018-02-06 9:53 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang @ 2018-02-06 9:53 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel, Sean Wang
From: Sean Wang <sean.wang@mediatek.com>
add High-Speed DMA (HSDMA) nodes
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 6cf67dd..ed7ee78 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -712,6 +712,16 @@
#reset-cells = <1>;
};
+ hsdma: dma-controller@1b007000 {
+ compatible = "mediatek,mt7622-hsdma";
+ reg = <0 0x1b007000 0 0x1000>;
+ interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <ðsys CLK_ETH_HSDMA_EN>;
+ clock-names = "hsdma";
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
+ #dma-cells = <1>;
+ };
+
eth: ethernet@1b100000 {
compatible = "mediatek,mt7622-eth",
"mediatek,mt2701-eth",
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 15/16] arm64: dts: mt7622: add High-Speed DMA device nodes
@ 2018-02-06 9:53 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang at mediatek.com @ 2018-02-06 9:53 UTC (permalink / raw)
To: linux-arm-kernel
From: Sean Wang <sean.wang@mediatek.com>
add High-Speed DMA (HSDMA) nodes
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 6cf67dd..ed7ee78 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -712,6 +712,16 @@
#reset-cells = <1>;
};
+ hsdma: dma-controller at 1b007000 {
+ compatible = "mediatek,mt7622-hsdma";
+ reg = <0 0x1b007000 0 0x1000>;
+ interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <ðsys CLK_ETH_HSDMA_EN>;
+ clock-names = "hsdma";
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
+ #dma-cells = <1>;
+ };
+
eth: ethernet at 1b100000 {
compatible = "mediatek,mt7622-eth",
"mediatek,mt2701-eth",
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 15/16] arm64: dts: mt7622: add High-Speed DMA device nodes
@ 2018-02-06 9:53 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2018-02-06 9:53 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Sean Wang
From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
add High-Speed DMA (HSDMA) nodes
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 6cf67dd..ed7ee78 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -712,6 +712,16 @@
#reset-cells = <1>;
};
+ hsdma: dma-controller@1b007000 {
+ compatible = "mediatek,mt7622-hsdma";
+ reg = <0 0x1b007000 0 0x1000>;
+ interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <ðsys CLK_ETH_HSDMA_EN>;
+ clock-names = "hsdma";
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
+ #dma-cells = <1>;
+ };
+
eth: ethernet@1b100000 {
compatible = "mediatek,mt7622-eth",
"mediatek,mt2701-eth",
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 85+ messages in thread
* [PATCH v2 16/16] arm64: dts: mt7622: add mmc related device nodes
2018-02-06 9:52 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w
(?)
@ 2018-02-06 9:53 ` sean.wang
-1 siblings, 0 replies; 85+ messages in thread
From: sean.wang @ 2018-02-06 9:53 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel, Sean Wang, Jimin Wang
From: Sean Wang <sean.wang@mediatek.com>
add mmc device nodes and proper setup for used pins
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Jimin Wang <jimin.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 106 +++++++++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 20 +++++
2 files changed, 126 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 5746cb3..b858df6 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
#include "mt7622.dtsi"
#include "mt6380.dtsi"
@@ -53,6 +54,14 @@
reg = <0 0x40000000 0 0x3F000000>;
};
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
@@ -89,6 +98,23 @@
function = "emmc", "emmc_rst";
groups = "emmc";
};
+
+ /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
+ * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
+ * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
+ */
+ conf-cmd-dat {
+ pins = "NDL0", "NDL1", "NDL2",
+ "NDL3", "NDL4", "NDL5",
+ "NDL6", "NDL7", "NRB";
+ input-enable;
+ bias-pull-up;
+ };
+
+ conf-clk {
+ pins = "NCLE";
+ bias-pull-down;
+ };
};
emmc_pins_uhs: emmc-pins-uhs {
@@ -96,6 +122,21 @@
function = "emmc";
groups = "emmc";
};
+
+ conf-cmd-dat {
+ pins = "NDL0", "NDL1", "NDL2",
+ "NDL3", "NDL4", "NDL5",
+ "NDL6", "NDL7", "NRB";
+ input-enable;
+ drive-strength = <4>;
+ bias-pull-up;
+ };
+
+ conf-clk {
+ pins = "NCLE";
+ drive-strength = <4>;
+ bias-pull-down;
+ };
};
eth_pins: eth-pins {
@@ -194,6 +235,27 @@
function = "sd";
groups = "sd_0";
};
+
+ /* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
+ * "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
+ * DAT2, DAT3, CMD, CLK for SD respectively.
+ */
+ conf-cmd-data {
+ pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+ "I2S2_IN","I2S4_OUT";
+ input-enable;
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ conf-clk {
+ pins = "I2S3_OUT";
+ drive-strength = <12>;
+ bias-pull-down;
+ };
+ conf-cd {
+ pins = "TXD3";
+ bias-pull-up;
+ };
};
sd0_pins_uhs: sd0-pins-uhs {
@@ -201,6 +263,18 @@
function = "sd";
groups = "sd_0";
};
+
+ conf-cmd-data {
+ pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+ "I2S2_IN","I2S4_OUT";
+ input-enable;
+ bias-pull-up;
+ };
+
+ conf-clk {
+ pins = "I2S3_OUT";
+ bias-pull-down;
+ };
};
/* Serial NAND is shared pin with SPI-NOR */
@@ -311,6 +385,38 @@
status = "okay";
};
+&mmc0 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&emmc_pins_default>;
+ pinctrl-1 = <&emmc_pins_uhs>;
+ status = "okay";
+ bus-width = <8>;
+ max-frequency = <50000000>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+ non-removable;
+};
+
+&mmc1 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&sd0_pins_default>;
+ pinctrl-1 = <&sd0_pins_uhs>;
+ status = "okay";
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ cap-sd-highspeed;
+ r_smpl = <1>;
+ cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_3p3v>;
+ assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+};
+
&nandc {
pinctrl-names = "default";
pinctrl-0 = <¶llel_nand_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index ed7ee78..177a651 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -524,6 +524,26 @@
status = "disabled";
};
+ mmc0: mmc@11230000 {
+ compatible = "mediatek,mt7622-mmc";
+ reg = <0 0x11230000 0 0x1000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_MSDC30_0_PD>,
+ <&topckgen CLK_TOP_MSDC50_0_SEL>;
+ clock-names = "source", "hclk";
+ status = "disabled";
+ };
+
+ mmc1: mmc@11240000 {
+ compatible = "mediatek,mt7622-mmc";
+ reg = <0 0x11240000 0 0x1000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_MSDC30_1_PD>,
+ <&topckgen CLK_TOP_AXI_SEL>;
+ clock-names = "source", "hclk";
+ status = "disabled";
+ };
+
ssusbsys: ssusbsys@1a000000 {
compatible = "mediatek,mt7622-ssusbsys",
"syscon";
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 16/16] arm64: dts: mt7622: add mmc related device nodes
@ 2018-02-06 9:53 ` sean.wang
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang at mediatek.com @ 2018-02-06 9:53 UTC (permalink / raw)
To: linux-arm-kernel
From: Sean Wang <sean.wang@mediatek.com>
add mmc device nodes and proper setup for used pins
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Jimin Wang <jimin.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 106 +++++++++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 20 +++++
2 files changed, 126 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 5746cb3..b858df6 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
#include "mt7622.dtsi"
#include "mt6380.dtsi"
@@ -53,6 +54,14 @@
reg = <0 0x40000000 0 0x3F000000>;
};
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
@@ -89,6 +98,23 @@
function = "emmc", "emmc_rst";
groups = "emmc";
};
+
+ /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
+ * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
+ * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
+ */
+ conf-cmd-dat {
+ pins = "NDL0", "NDL1", "NDL2",
+ "NDL3", "NDL4", "NDL5",
+ "NDL6", "NDL7", "NRB";
+ input-enable;
+ bias-pull-up;
+ };
+
+ conf-clk {
+ pins = "NCLE";
+ bias-pull-down;
+ };
};
emmc_pins_uhs: emmc-pins-uhs {
@@ -96,6 +122,21 @@
function = "emmc";
groups = "emmc";
};
+
+ conf-cmd-dat {
+ pins = "NDL0", "NDL1", "NDL2",
+ "NDL3", "NDL4", "NDL5",
+ "NDL6", "NDL7", "NRB";
+ input-enable;
+ drive-strength = <4>;
+ bias-pull-up;
+ };
+
+ conf-clk {
+ pins = "NCLE";
+ drive-strength = <4>;
+ bias-pull-down;
+ };
};
eth_pins: eth-pins {
@@ -194,6 +235,27 @@
function = "sd";
groups = "sd_0";
};
+
+ /* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
+ * "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
+ * DAT2, DAT3, CMD, CLK for SD respectively.
+ */
+ conf-cmd-data {
+ pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+ "I2S2_IN","I2S4_OUT";
+ input-enable;
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ conf-clk {
+ pins = "I2S3_OUT";
+ drive-strength = <12>;
+ bias-pull-down;
+ };
+ conf-cd {
+ pins = "TXD3";
+ bias-pull-up;
+ };
};
sd0_pins_uhs: sd0-pins-uhs {
@@ -201,6 +263,18 @@
function = "sd";
groups = "sd_0";
};
+
+ conf-cmd-data {
+ pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+ "I2S2_IN","I2S4_OUT";
+ input-enable;
+ bias-pull-up;
+ };
+
+ conf-clk {
+ pins = "I2S3_OUT";
+ bias-pull-down;
+ };
};
/* Serial NAND is shared pin with SPI-NOR */
@@ -311,6 +385,38 @@
status = "okay";
};
+&mmc0 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&emmc_pins_default>;
+ pinctrl-1 = <&emmc_pins_uhs>;
+ status = "okay";
+ bus-width = <8>;
+ max-frequency = <50000000>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+ non-removable;
+};
+
+&mmc1 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&sd0_pins_default>;
+ pinctrl-1 = <&sd0_pins_uhs>;
+ status = "okay";
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ cap-sd-highspeed;
+ r_smpl = <1>;
+ cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_3p3v>;
+ assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+};
+
&nandc {
pinctrl-names = "default";
pinctrl-0 = <¶llel_nand_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index ed7ee78..177a651 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -524,6 +524,26 @@
status = "disabled";
};
+ mmc0: mmc at 11230000 {
+ compatible = "mediatek,mt7622-mmc";
+ reg = <0 0x11230000 0 0x1000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_MSDC30_0_PD>,
+ <&topckgen CLK_TOP_MSDC50_0_SEL>;
+ clock-names = "source", "hclk";
+ status = "disabled";
+ };
+
+ mmc1: mmc at 11240000 {
+ compatible = "mediatek,mt7622-mmc";
+ reg = <0 0x11240000 0 0x1000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_MSDC30_1_PD>,
+ <&topckgen CLK_TOP_AXI_SEL>;
+ clock-names = "source", "hclk";
+ status = "disabled";
+ };
+
ssusbsys: ssusbsys at 1a000000 {
compatible = "mediatek,mt7622-ssusbsys",
"syscon";
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread* [PATCH v2 16/16] arm64: dts: mt7622: add mmc related device nodes
@ 2018-02-06 9:53 ` sean.wang
0 siblings, 0 replies; 85+ messages in thread
From: sean.wang @ 2018-02-06 9:53 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel, Sean Wang, Jimin Wang
From: Sean Wang <sean.wang@mediatek.com>
add mmc device nodes and proper setup for used pins
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Jimin Wang <jimin.wang@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 106 +++++++++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 20 +++++
2 files changed, 126 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 5746cb3..b858df6 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
#include "mt7622.dtsi"
#include "mt6380.dtsi"
@@ -53,6 +54,14 @@
reg = <0 0x40000000 0 0x3F000000>;
};
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
@@ -89,6 +98,23 @@
function = "emmc", "emmc_rst";
groups = "emmc";
};
+
+ /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
+ * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
+ * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
+ */
+ conf-cmd-dat {
+ pins = "NDL0", "NDL1", "NDL2",
+ "NDL3", "NDL4", "NDL5",
+ "NDL6", "NDL7", "NRB";
+ input-enable;
+ bias-pull-up;
+ };
+
+ conf-clk {
+ pins = "NCLE";
+ bias-pull-down;
+ };
};
emmc_pins_uhs: emmc-pins-uhs {
@@ -96,6 +122,21 @@
function = "emmc";
groups = "emmc";
};
+
+ conf-cmd-dat {
+ pins = "NDL0", "NDL1", "NDL2",
+ "NDL3", "NDL4", "NDL5",
+ "NDL6", "NDL7", "NRB";
+ input-enable;
+ drive-strength = <4>;
+ bias-pull-up;
+ };
+
+ conf-clk {
+ pins = "NCLE";
+ drive-strength = <4>;
+ bias-pull-down;
+ };
};
eth_pins: eth-pins {
@@ -194,6 +235,27 @@
function = "sd";
groups = "sd_0";
};
+
+ /* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
+ * "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
+ * DAT2, DAT3, CMD, CLK for SD respectively.
+ */
+ conf-cmd-data {
+ pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+ "I2S2_IN","I2S4_OUT";
+ input-enable;
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ conf-clk {
+ pins = "I2S3_OUT";
+ drive-strength = <12>;
+ bias-pull-down;
+ };
+ conf-cd {
+ pins = "TXD3";
+ bias-pull-up;
+ };
};
sd0_pins_uhs: sd0-pins-uhs {
@@ -201,6 +263,18 @@
function = "sd";
groups = "sd_0";
};
+
+ conf-cmd-data {
+ pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+ "I2S2_IN","I2S4_OUT";
+ input-enable;
+ bias-pull-up;
+ };
+
+ conf-clk {
+ pins = "I2S3_OUT";
+ bias-pull-down;
+ };
};
/* Serial NAND is shared pin with SPI-NOR */
@@ -311,6 +385,38 @@
status = "okay";
};
+&mmc0 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&emmc_pins_default>;
+ pinctrl-1 = <&emmc_pins_uhs>;
+ status = "okay";
+ bus-width = <8>;
+ max-frequency = <50000000>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+ non-removable;
+};
+
+&mmc1 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&sd0_pins_default>;
+ pinctrl-1 = <&sd0_pins_uhs>;
+ status = "okay";
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ cap-sd-highspeed;
+ r_smpl = <1>;
+ cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_3p3v>;
+ assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+};
+
&nandc {
pinctrl-names = "default";
pinctrl-0 = <¶llel_nand_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index ed7ee78..177a651 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -524,6 +524,26 @@
status = "disabled";
};
+ mmc0: mmc@11230000 {
+ compatible = "mediatek,mt7622-mmc";
+ reg = <0 0x11230000 0 0x1000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_MSDC30_0_PD>,
+ <&topckgen CLK_TOP_MSDC50_0_SEL>;
+ clock-names = "source", "hclk";
+ status = "disabled";
+ };
+
+ mmc1: mmc@11240000 {
+ compatible = "mediatek,mt7622-mmc";
+ reg = <0 0x11240000 0 0x1000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_MSDC30_1_PD>,
+ <&topckgen CLK_TOP_AXI_SEL>;
+ clock-names = "source", "hclk";
+ status = "disabled";
+ };
+
ssusbsys: ssusbsys@1a000000 {
compatible = "mediatek,mt7622-ssusbsys",
"syscon";
--
2.7.4
^ permalink raw reply related [flat|nested] 85+ messages in thread