[PATCH 0/4] Zyxel NSA310S NAS : convert to Driver Model.

[PATCH 0/4] Zyxel NSA310S NAS : convert to Driver Model.

[Tony Dinh]

- Add device tree kirkwood-nsa310s.dts
- Add DM_USB, DM_ETH, DM_SATA and associated configs to nsa310s_defconfig
- Move some miscellaneous configs from board file to nsa310s_defconfig
- Replace old device name "egiga0" with Ethernet PHY name
from device tree kirkwood.dtsi
- Removed IDE, and add SATA configs in board file nsa310s.c


Tony Dinh (4):
  NSA310S : Add device tree DTS for Zyxel NSA310S board
  NSA310S : Add DM USB, DM Ethernet, and DM SATA configs
  NSA310S : Use Ethernet PHY name from device tree
  NSA310S : Add DM SATA configs

 arch/arm/dts/Makefile             |   1 +
 arch/arm/dts/kirkwood-nsa310s.dts | 318 ++++++++++++++++++++++++++++++
 board/zyxel/nsa310s/nsa310s.c     |  15 +-
 configs/nsa310s_defconfig         |  12 +-
 include/configs/nsa310s.h         |   9 +-
 5 files changed, 342 insertions(+), 13 deletions(-)
 create mode 100644 arch/arm/dts/kirkwood-nsa310s.dts

-- 
2.20.1

[PATCH 1/4] NSA310S : Add device tree DTS for Zyxel NSA310S board

[Tony Dinh]

Add device tree kirkwood-nsa310s.dts for Zyxel NSA310S board to
convert to Driver Model.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
---

 arch/arm/dts/Makefile             |   1 +
 arch/arm/dts/kirkwood-nsa310s.dts | 318 ++++++++++++++++++++++++++++++
 2 files changed, 319 insertions(+)
 create mode 100644 arch/arm/dts/kirkwood-nsa310s.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 096068261d..0ff77c8b3d 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -56,6 +56,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += \
 	kirkwood-ns2lite.dtb \
 	kirkwood-ns2max.dtb \
 	kirkwood-ns2mini.dtb \
+	kirkwood-nsa310s.dtb \
 	kirkwood-openrd-base.dtb \
 	kirkwood-openrd-client.dtb \
 	kirkwood-openrd-ultimate.dtb \
diff --git a/arch/arm/dts/kirkwood-nsa310s.dts b/arch/arm/dts/kirkwood-nsa310s.dts
new file mode 100644
index 0000000000..e1c9c9080c
--- /dev/null
+++ b/arch/arm/dts/kirkwood-nsa310s.dts
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree file for the Zyxel NSA 310S NAS box.
+ *
+ * Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com>
+ *
+ * Based on
+ * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
+ * Based upon the board setup file created by Peter Schildmann
+ */
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Zyxel NSA310S";
+	compatible = "zyxel,nsa320s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins ;
+				marvell,function = "sata0";
+			};
+
+			pmx_sata1: pmx-sata1 {
+				marvell,pins ;
+				marvell,function = "sata1";
+			};
+
+			pmx_usb_power: pmx-usb-power {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_pwr_off: pmx-pwr-off {
+				marvell,pins = "mpp27";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_reset: pmx-btn-reset {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_copy: pmx-btn-copy {
+				marvell,pins = "mpp25";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_power: pmx-btn-power {
+				marvell,pins = "mpp26";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd2_green: pmx-led-hdd2-green {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd2_red: pmx-led-hdd2-red {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_green: pmx-led-usb-green {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_copy_green: pmx-led-copy-green {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_copy_red: pmx-led-copy-red {
+				marvell,pins = "mpp23";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_green: pmx-led-sys-green {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_orange: pmx-led-sys-orange {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd1_green: pmx-led-hdd1-green {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd1_red: pmx-led-hdd1-red {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_pwr_sata1: pmx-pwr-sata1 {
+				marvell,pins = "mpp33";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "ok";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		rtc@10300 {
+			status = "disabled";
+		};
+
+		i2c@11000 {
+			status = "okay";
+			ht1382: rtc@68 {
+				compatible = "htk,ht1382";
+				reg = <0x68>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>;
+
+		usb0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata1_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_pwr_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+		};
+		button@2 {
+			label = "Copy Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		};
+		button@3 {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
+			     &pmx_led_usb_green
+			     &pmx_led_sys_green &pmx_led_sys_orange
+			     &pmx_led_copy_green &pmx_led_copy_red
+			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
+		pinctrl-names = "default";
+
+		green-sys {
+			label = "nsa310s:green:sys";
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+		orange-sys {
+			label = "nsa310s:orange:sys";
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd1 {
+			label = "nsa310s:green:hdd1";
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd1 {
+			label = "nsa310s:red:hdd1";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd2 {
+			label = "nsa310s:green:hdd2";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd2 {
+			label = "nsa310s:red:hdd2";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		green-usb {
+			label = "nsa310s:green:usb";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+		green-copy {
+			label = "nsa310s:green:copy";
+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "ide-disk";
+		};
+		red-copy {
+			label = "nsa310s:red:copy";
+			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x0100000>;
+	};
+	partition@100000 {
+		label = "stock_uboot_env";
+		reg = <0x0100000 0x0080000>;
+	};
+	partition@180000 {
+		label = "key_store";
+		reg = <0x0180000 0x0080000>;
+	};
+	partition@200000 {
+		label = "info";
+		reg = <0x0200000 0x0080000>;
+	};
+	partition@280000 {
+		label = "etc";
+		reg = <0x0280000 0x0a00000>;
+	};
+	partition@c80000 {
+		label = "kernel_1";
+		reg = <0x0c80000 0x0a00000>;
+	};
+	partition@1680000 {
+		label = "rootfs1";
+		reg = <0x1680000 0x2fc0000>;
+	};
+	partition@4640000 {
+		label = "kernel_2";
+		reg = <0x4640000 0x0a00000>;
+	};
+	partition@5040000 {
+		label = "rootfs2";
+		reg = <0x5040000 0x2fc0000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+	ethphy0: ethernet-phy@1 {
+		compatible = "marvell,88e1510";
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
-- 
2.20.1

[PATCH 2/4] NSA310S : Add DM USB, DM Ethernet, and DM SATA configs

[Tony Dinh]

Convert to Driver Model.

- Add DM USB, DM Ethernet, and DM SATA configs to nsa310s_defconfig
- Add CONFIG_DEFAULT_DEVICE_TREE to nsa310s_defconfig
- Move CONFIG_ENV_SECT_SIZE from board file to nsa310s_defconfig
- Add CONFIG_IDENT_STRING, and CONFIG_NET_RANDOM_ETHADDR
to nsa310s_defconfig

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
---

 configs/nsa310s_defconfig | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/configs/nsa310s_defconfig b/configs/nsa310s_defconfig
index e4cf1c470e..fac0322e2b 100644
--- a/configs/nsa310s_defconfig
+++ b/configs/nsa310s_defconfig
@@ -7,14 +7,16 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_TARGET_NSA310S=y
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0xE0000
+CONFIG_ENV_SECT_SIZE=0x20000
+CONFIG_DEFAULT_DEVICE_TREE="kirkwood-nsa310s"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_PREBOOT=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="nsa310s => "
+CONFIG_IDENT_STRING="\nZyXEL NSA310S/320S 1/2-Bay Power Media Server"
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_IDE=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
@@ -44,3 +46,11 @@ CONFIG_USB_STORAGE=y
 CONFIG_LZMA=y
 CONFIG_BZIP2=y
 CONFIG_OF_LIBFDT=y
+CONFIG_DM=y
+CONFIG_BLK=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM_USB=y
+CONFIG_DM_ETH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_CMD_SATA=y
+CONFIG_SATA_MV=y
-- 
2.20.1

[PATCH 3/4] NSA310S : Use Ethernet PHY name from device tree

[Tony Dinh]

In DM Ethernet, the old "egiga0" name is no longer valid, so replace it
with Ethernet PHY name from device tree.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
---

 board/zyxel/nsa310s/nsa310s.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/board/zyxel/nsa310s/nsa310s.c b/board/zyxel/nsa310s/nsa310s.c
index cd4a7723b1..29aded1910 100644
--- a/board/zyxel/nsa310s/nsa310s.c
+++ b/board/zyxel/nsa310s/nsa310s.c
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
+ * Copyright (C) 2021 Tony Dinh <mibodhi@gmail.com>
  * Copyright (C) 2015
  * Gerald Kerma <dreagle@doukki.net>
  * Tony Dinh <mibodhi@gmail.com>
@@ -81,22 +82,18 @@ int board_init(void)
 	return 0;
 }
 
+#define PHY_ADR	1
+
 #ifdef CONFIG_RESET_PHY_R
 void reset_phy(void)
 {
 	u16 reg;
-	u16 phyaddr;
-	char *name = "egiga0";
+	u16 phyaddr = PHY_ADR;
+	char *name = "ethernet-controller@72000";
 
 	if (miiphy_set_current_dev(name))
 		return;
 
-	/* read PHY dev address */
-	if (miiphy_read(name, 0xee, 0xee, (u16 *) &phyaddr)) {
-		printf("could not read PHY dev address\n");
-		return;
-	}
-
 	/* set RGMII delay */
 	miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, MV88E1318_MAC_CTRL_PG);
 	miiphy_read(name, phyaddr, MV88E1318_MAC_CTRL_REG, &reg);
@@ -131,5 +128,7 @@ void reset_phy(void)
 	/* downshift */
 	miiphy_write(name, phyaddr, 0x10, 0x3860);
 	miiphy_write(name, phyaddr, 0x0, 0x9140);
+
+	printf("MV88E1318 PHY initialized on %s\n", name);
 }
 #endif /* CONFIG_RESET_PHY_R */
-- 
2.20.1

[PATCH 4/4] NSA310S : Add DM SATA configs

[Tony Dinh]

Enable DM SATA, removed IDE driver, and add SATA MV driver.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
---

 include/configs/nsa310s.h | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h
index e38c65a485..94f293de90 100644
--- a/include/configs/nsa310s.h
+++ b/include/configs/nsa310s.h
@@ -1,5 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
+ * Copyright (C) 2021 Tony Dinh <mibodhi@gmail.com>
  * Copyright (C) 2015
  * Gerald Kerma <dreagle@doukki.net>
  * Tony Dinh <mibodhi@gmail.com>
@@ -46,10 +47,10 @@
 #endif /* CONFIG_CMD_NET */
 
 /* SATA driver configuration */
-#ifdef CONFIG_IDE
-#define __io
-#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
-#endif /* CONFIG_IDE */
+#ifdef CONFIG_SATA
+#define CONFIG_SYS_SATA_MAX_DEVICE	1
+#define CONFIG_LBA48
+#endif /* CONFIG_SATA */
 
 /* RTC driver configuration */
 #ifdef CONFIG_CMD_DATE
-- 
2.20.1

Re: [PATCH 1/4] NSA310S : Add device tree DTS for Zyxel NSA310S board

[Stefan Roese]

On 01.07.21 06:26, Tony Dinh wrote:
> Add device tree kirkwood-nsa310s.dts for Zyxel NSA310S board to
> convert to Driver Model.
> 
> Signed-off-by: Tony Dinh <mibodhi@gmail.com>

Reviewed-by: Stefan Roese <sr@denx.de>

Thanks,
Stefan

> ---
> 
>   arch/arm/dts/Makefile             |   1 +
>   arch/arm/dts/kirkwood-nsa310s.dts | 318 ++++++++++++++++++++++++++++++
>   2 files changed, 319 insertions(+)
>   create mode 100644 arch/arm/dts/kirkwood-nsa310s.dts
> 
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 096068261d..0ff77c8b3d 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -56,6 +56,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += \
>   	kirkwood-ns2lite.dtb \
>   	kirkwood-ns2max.dtb \
>   	kirkwood-ns2mini.dtb \
> +	kirkwood-nsa310s.dtb \
>   	kirkwood-openrd-base.dtb \
>   	kirkwood-openrd-client.dtb \
>   	kirkwood-openrd-ultimate.dtb \
> diff --git a/arch/arm/dts/kirkwood-nsa310s.dts b/arch/arm/dts/kirkwood-nsa310s.dts
> new file mode 100644
> index 0000000000..e1c9c9080c
> --- /dev/null
> +++ b/arch/arm/dts/kirkwood-nsa310s.dts
> @@ -0,0 +1,318 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device tree file for the Zyxel NSA 310S NAS box.
> + *
> + * Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com>
> + *
> + * Based on
> + * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
> + * Based upon the board setup file created by Peter Schildmann
> + */
> +/dts-v1/;
> +
> +#include "kirkwood.dtsi"
> +#include "kirkwood-6281.dtsi"
> +
> +/ {
> +	model = "Zyxel NSA310S";
> +	compatible = "zyxel,nsa320s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x00000000 0x10000000>;
> +	};
> +
> +	chosen {
> +		bootargs = "console=ttyS0,115200";
> +		stdout-path = &uart0;
> +	};
> +
> +	ocp@f1000000 {
> +		pinctrl: pin-controller@10000 {
> +			pinctrl-names = "default";
> +
> +			pmx_sata0: pmx-sata0 {
> +				marvell,pins ;
> +				marvell,function = "sata0";
> +			};
> +
> +			pmx_sata1: pmx-sata1 {
> +				marvell,pins ;
> +				marvell,function = "sata1";
> +			};
> +
> +			pmx_usb_power: pmx-usb-power {
> +				marvell,pins = "mpp21";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_pwr_off: pmx-pwr-off {
> +				marvell,pins = "mpp27";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_btn_reset: pmx-btn-reset {
> +				marvell,pins = "mpp24";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_btn_copy: pmx-btn-copy {
> +				marvell,pins = "mpp25";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_btn_power: pmx-btn-power {
> +				marvell,pins = "mpp26";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_led_hdd2_green: pmx-led-hdd2-green {
> +				marvell,pins = "mpp34";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_led_hdd2_red: pmx-led-hdd2-red {
> +				marvell,pins = "mpp12";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_led_usb_green: pmx-led-usb-green {
> +				marvell,pins = "mpp15";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_led_copy_green: pmx-led-copy-green {
> +				marvell,pins = "mpp22";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_led_copy_red: pmx-led-copy-red {
> +				marvell,pins = "mpp23";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_led_sys_green: pmx-led-sys-green {
> +				marvell,pins = "mpp28";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_led_sys_orange: pmx-led-sys-orange {
> +				marvell,pins = "mpp29";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_led_hdd1_green: pmx-led-hdd1-green {
> +				marvell,pins = "mpp16";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_led_hdd1_red: pmx-led-hdd1-red {
> +				marvell,pins = "mpp13";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_pwr_sata1: pmx-pwr-sata1 {
> +				marvell,pins = "mpp33";
> +				marvell,function = "gpio";
> +			};
> +		};
> +
> +		serial@12000 {
> +			status = "ok";
> +		};
> +
> +		sata@80000 {
> +			status = "okay";
> +			nr-ports = <1>;
> +		};
> +
> +		rtc@10300 {
> +			status = "disabled";
> +		};
> +
> +		i2c@11000 {
> +			status = "okay";
> +			ht1382: rtc@68 {
> +				compatible = "htk,ht1382";
> +				reg = <0x68>;
> +			};
> +		};
> +	};
> +
> +	regulators {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>;
> +
> +		usb0_power: regulator@1 {
> +			compatible = "regulator-fixed";
> +			reg = <1>;
> +			regulator-name = "USB Power";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			regulator-always-on;
> +			regulator-boot-on;
> +			enable-active-high;
> +			gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		sata1_power: regulator@2 {
> +			compatible = "regulator-fixed";
> +			reg = <2>;
> +			regulator-name = "SATA1 Power";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			regulator-always-on;
> +			regulator-boot-on;
> +			enable-active-high;
> +			gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
> +		};
> +	};
> +
> +	gpio_poweroff {
> +		compatible = "gpio-poweroff";
> +		pinctrl-0 = <&pmx_pwr_off>;
> +		pinctrl-names = "default";
> +		gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
> +	};
> +
> +	gpio_keys {
> +		compatible = "gpio-keys";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
> +		pinctrl-names = "default";
> +
> +		button@1 {
> +			label = "Power Button";
> +			linux,code = <KEY_POWER>;
> +			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
> +		};
> +		button@2 {
> +			label = "Copy Button";
> +			linux,code = <KEY_COPY>;
> +			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
> +		};
> +		button@3 {
> +			label = "Reset Button";
> +			linux,code = <KEY_RESTART>;
> +			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +
> +	gpio-leds {
> +		compatible = "gpio-leds";
> +		pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
> +			     &pmx_led_usb_green
> +			     &pmx_led_sys_green &pmx_led_sys_orange
> +			     &pmx_led_copy_green &pmx_led_copy_red
> +			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
> +		pinctrl-names = "default";
> +
> +		green-sys {
> +			label = "nsa310s:green:sys";
> +			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "default-on";
> +		};
> +		orange-sys {
> +			label = "nsa310s:orange:sys";
> +			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
> +		};
> +		green-hdd1 {
> +			label = "nsa310s:green:hdd1";
> +			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
> +		};
> +		red-hdd1 {
> +			label = "nsa310s:red:hdd1";
> +			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
> +		};
> +		green-hdd2 {
> +			label = "nsa310s:green:hdd2";
> +			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
> +		};
> +		red-hdd2 {
> +			label = "nsa310s:red:hdd2";
> +			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
> +		};
> +		green-usb {
> +			label = "nsa310s:green:usb";
> +			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
> +		};
> +		green-copy {
> +			label = "nsa310s:green:copy";
> +			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "ide-disk";
> +		};
> +		red-copy {
> +			label = "nsa310s:red:copy";
> +			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
> +		};
> +	};
> +};
> +
> +&nand {
> +	status = "okay";
> +	chip-delay = <35>;
> +
> +	partition@0 {
> +		label = "uboot";
> +		reg = <0x0000000 0x0100000>;
> +	};
> +	partition@100000 {
> +		label = "stock_uboot_env";
> +		reg = <0x0100000 0x0080000>;
> +	};
> +	partition@180000 {
> +		label = "key_store";
> +		reg = <0x0180000 0x0080000>;
> +	};
> +	partition@200000 {
> +		label = "info";
> +		reg = <0x0200000 0x0080000>;
> +	};
> +	partition@280000 {
> +		label = "etc";
> +		reg = <0x0280000 0x0a00000>;
> +	};
> +	partition@c80000 {
> +		label = "kernel_1";
> +		reg = <0x0c80000 0x0a00000>;
> +	};
> +	partition@1680000 {
> +		label = "rootfs1";
> +		reg = <0x1680000 0x2fc0000>;
> +	};
> +	partition@4640000 {
> +		label = "kernel_2";
> +		reg = <0x4640000 0x0a00000>;
> +	};
> +	partition@5040000 {
> +		label = "rootfs2";
> +		reg = <0x5040000 0x2fc0000>;
> +	};
> +};
> +
> +&mdio {
> +	status = "okay";
> +	ethphy0: ethernet-phy@1 {
> +		compatible = "marvell,88e1510";
> +		reg = <1>;
> +	};
> +};
> +
> +&eth0 {
> +	status = "okay";
> +	ethernet0-port@0 {
> +		phy-handle = <&ethphy0>;
> +	};
> +};
> +
> +&pciec {
> +	status = "okay";
> +};
> +
> +&pcie0 {
> +	status = "okay";
> +};
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de

Re: [PATCH 2/4] NSA310S : Add DM USB, DM Ethernet, and DM SATA configs

[Stefan Roese]

On 01.07.21 06:26, Tony Dinh wrote:
> Convert to Driver Model.
> 
> - Add DM USB, DM Ethernet, and DM SATA configs to nsa310s_defconfig
> - Add CONFIG_DEFAULT_DEVICE_TREE to nsa310s_defconfig
> - Move CONFIG_ENV_SECT_SIZE from board file to nsa310s_defconfig
> - Add CONFIG_IDENT_STRING, and CONFIG_NET_RANDOM_ETHADDR
> to nsa310s_defconfig
> 
> Signed-off-by: Tony Dinh <mibodhi@gmail.com>

Reviewed-by: Stefan Roese <sr@denx.de>

Thanks,
Stefan

> ---
> 
>   configs/nsa310s_defconfig | 12 +++++++++++-
>   1 file changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/configs/nsa310s_defconfig b/configs/nsa310s_defconfig
> index e4cf1c470e..fac0322e2b 100644
> --- a/configs/nsa310s_defconfig
> +++ b/configs/nsa310s_defconfig
> @@ -7,14 +7,16 @@ CONFIG_NR_DRAM_BANKS=2
>   CONFIG_TARGET_NSA310S=y
>   CONFIG_ENV_SIZE=0x20000
>   CONFIG_ENV_OFFSET=0xE0000
> +CONFIG_ENV_SECT_SIZE=0x20000
> +CONFIG_DEFAULT_DEVICE_TREE="kirkwood-nsa310s"
>   CONFIG_BOOTDELAY=3
>   CONFIG_USE_PREBOOT=y
>   # CONFIG_DISPLAY_BOARDINFO is not set
>   CONFIG_HUSH_PARSER=y
>   CONFIG_SYS_PROMPT="nsa310s => "
> +CONFIG_IDENT_STRING="\nZyXEL NSA310S/320S 1/2-Bay Power Media Server"
>   CONFIG_CMD_BOOTZ=y
>   # CONFIG_CMD_FLASH is not set
> -CONFIG_CMD_IDE=y
>   CONFIG_CMD_NAND=y
>   CONFIG_CMD_USB=y
>   # CONFIG_CMD_SETEXPR is not set
> @@ -44,3 +46,11 @@ CONFIG_USB_STORAGE=y
>   CONFIG_LZMA=y
>   CONFIG_BZIP2=y
>   CONFIG_OF_LIBFDT=y
> +CONFIG_DM=y
> +CONFIG_BLK=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_DM_USB=y
> +CONFIG_DM_ETH=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_CMD_SATA=y
> +CONFIG_SATA_MV=y
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de

Re: [PATCH 3/4] NSA310S : Use Ethernet PHY name from device tree

[Stefan Roese]

On 01.07.21 06:26, Tony Dinh wrote:
> In DM Ethernet, the old "egiga0" name is no longer valid, so replace it
> with Ethernet PHY name from device tree.
> 
> Signed-off-by: Tony Dinh <mibodhi@gmail.com>
> ---
> 
>   board/zyxel/nsa310s/nsa310s.c | 15 +++++++--------
>   1 file changed, 7 insertions(+), 8 deletions(-)
> 
> diff --git a/board/zyxel/nsa310s/nsa310s.c b/board/zyxel/nsa310s/nsa310s.c
> index cd4a7723b1..29aded1910 100644
> --- a/board/zyxel/nsa310s/nsa310s.c
> +++ b/board/zyxel/nsa310s/nsa310s.c
> @@ -1,5 +1,6 @@
>   // SPDX-License-Identifier: GPL-2.0+
>   /*
> + * Copyright (C) 2021 Tony Dinh <mibodhi@gmail.com>

AFAIU, just changing a few lines, as this patch does, does not justify
to add a copyright notice to this file.

>    * Copyright (C) 2015
>    * Gerald Kerma <dreagle@doukki.net>
>    * Tony Dinh <mibodhi@gmail.com>
> @@ -81,22 +82,18 @@ int board_init(void)
>   	return 0;
>   }
>   
> +#define PHY_ADR	1

You should be able to read this PHY address from the device-tree now.
No need to define this here again.

Thanks,
Stefan

> +
>   #ifdef CONFIG_RESET_PHY_R
>   void reset_phy(void)
>   {
>   	u16 reg;
> -	u16 phyaddr;
> -	char *name = "egiga0";
> +	u16 phyaddr = PHY_ADR;
> +	char *name = "ethernet-controller@72000";
>   
>   	if (miiphy_set_current_dev(name))
>   		return;
>   
> -	/* read PHY dev address */
> -	if (miiphy_read(name, 0xee, 0xee, (u16 *) &phyaddr)) {
> -		printf("could not read PHY dev address\n");
> -		return;
> -	}
> -
>   	/* set RGMII delay */
>   	miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, MV88E1318_MAC_CTRL_PG);
>   	miiphy_read(name, phyaddr, MV88E1318_MAC_CTRL_REG, &reg);
> @@ -131,5 +128,7 @@ void reset_phy(void)
>   	/* downshift */
>   	miiphy_write(name, phyaddr, 0x10, 0x3860);
>   	miiphy_write(name, phyaddr, 0x0, 0x9140);
> +
> +	printf("MV88E1318 PHY initialized on %s\n", name);
>   }
>   #endif /* CONFIG_RESET_PHY_R */
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de

Re: [PATCH 4/4] NSA310S : Add DM SATA configs

[Stefan Roese]

On 01.07.21 06:26, Tony Dinh wrote:
> Enable DM SATA, removed IDE driver, and add SATA MV driver.
> 
> Signed-off-by: Tony Dinh <mibodhi@gmail.com>
> ---
> 
>   include/configs/nsa310s.h | 9 +++++----
>   1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h
> index e38c65a485..94f293de90 100644
> --- a/include/configs/nsa310s.h
> +++ b/include/configs/nsa310s.h
> @@ -1,5 +1,6 @@
>   /* SPDX-License-Identifier: GPL-2.0+ */
>   /*
> + * Copyright (C) 2021 Tony Dinh <mibodhi@gmail.com>
>    * Copyright (C) 2015
>    * Gerald Kerma <dreagle@doukki.net>
>    * Tony Dinh <mibodhi@gmail.com>

Please change this copyright line instead of adding yourself a 2nd
time.

Other than this:

Reviewed-by: Stefan Roese <sr@denx.de>

Thanks,
Stefan

> @@ -46,10 +47,10 @@
>   #endif /* CONFIG_CMD_NET */
>   
>   /* SATA driver configuration */
> -#ifdef CONFIG_IDE
> -#define __io
> -#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
> -#endif /* CONFIG_IDE */
> +#ifdef CONFIG_SATA
> +#define CONFIG_SYS_SATA_MAX_DEVICE	1
> +#define CONFIG_LBA48
> +#endif /* CONFIG_SATA */
>   
>   /* RTC driver configuration */
>   #ifdef CONFIG_CMD_DATE
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de

Re: [PATCH 3/4] NSA310S : Use Ethernet PHY name from device tree

[Stefan Roese]

Hi Tony,

On 01.07.21 10:19, Stefan Roese wrote:
> On 01.07.21 06:26, Tony Dinh wrote:
>> In DM Ethernet, the old "egiga0" name is no longer valid, so replace it
>> with Ethernet PHY name from device tree.
>>
>> Signed-off-by: Tony Dinh <mibodhi@gmail.com>
>> ---
>>
>>   board/zyxel/nsa310s/nsa310s.c | 15 +++++++--------
>>   1 file changed, 7 insertions(+), 8 deletions(-)
>>
>> diff --git a/board/zyxel/nsa310s/nsa310s.c 
>> b/board/zyxel/nsa310s/nsa310s.c
>> index cd4a7723b1..29aded1910 100644
>> --- a/board/zyxel/nsa310s/nsa310s.c
>> +++ b/board/zyxel/nsa310s/nsa310s.c
>> @@ -1,5 +1,6 @@
>>   // SPDX-License-Identifier: GPL-2.0+
>>   /*
>> + * Copyright (C) 2021 Tony Dinh <mibodhi@gmail.com>
> 
> AFAIU, just changing a few lines, as this patch does, does not justify
> to add a copyright notice to this file.

I just noticed that you already are present in the copyright notice
below. I suggest to change this in a way, so that your name only
occurs once, like:

* Copyright (C) 2015, 2021 Tony Dinh <mibodhi@gmail.com>

Does this make sense?

Thanks,
Stefan

>>    * Copyright (C) 2015
>>    * Gerald Kerma <dreagle@doukki.net>
>>    * Tony Dinh <mibodhi@gmail.com>
>> @@ -81,22 +82,18 @@ int board_init(void)
>>       return 0;
>>   }
>> +#define PHY_ADR    1
> 
> You should be able to read this PHY address from the device-tree now.
> No need to define this here again.
> 
> Thanks,
> Stefan
> 
>> +
>>   #ifdef CONFIG_RESET_PHY_R
>>   void reset_phy(void)
>>   {
>>       u16 reg;
>> -    u16 phyaddr;
>> -    char *name = "egiga0";
>> +    u16 phyaddr = PHY_ADR;
>> +    char *name = "ethernet-controller@72000";
>>       if (miiphy_set_current_dev(name))
>>           return;
>> -    /* read PHY dev address */
>> -    if (miiphy_read(name, 0xee, 0xee, (u16 *) &phyaddr)) {
>> -        printf("could not read PHY dev address\n");
>> -        return;
>> -    }
>> -
>>       /* set RGMII delay */
>>       miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, 
>> MV88E1318_MAC_CTRL_PG);
>>       miiphy_read(name, phyaddr, MV88E1318_MAC_CTRL_REG, &reg);
>> @@ -131,5 +128,7 @@ void reset_phy(void)
>>       /* downshift */
>>       miiphy_write(name, phyaddr, 0x10, 0x3860);
>>       miiphy_write(name, phyaddr, 0x0, 0x9140);
>> +
>> +    printf("MV88E1318 PHY initialized on %s\n", name);
>>   }
>>   #endif /* CONFIG_RESET_PHY_R */
>>
> 
> 
> Viele Grüße,
> Stefan
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de

Re: [PATCH 3/4] NSA310S : Use Ethernet PHY name from device tree

[Tony (bodhi)]

Hi Stefan,

On Thu, Jul 1, 2021 at 1:22 AM Stefan Roese <sr@denx.de> wrote:
>
> Hi Tony,
>
> On 01.07.21 10:19, Stefan Roese wrote:
> > On 01.07.21 06:26, Tony Dinh wrote:
> >> In DM Ethernet, the old "egiga0" name is no longer valid, so replace it
> >> with Ethernet PHY name from device tree.
> >>
> >> Signed-off-by: Tony Dinh <mibodhi@gmail.com>
> >> ---
> >>
> >>   board/zyxel/nsa310s/nsa310s.c | 15 +++++++--------
> >>   1 file changed, 7 insertions(+), 8 deletions(-)
> >>
> >> diff --git a/board/zyxel/nsa310s/nsa310s.c
> >> b/board/zyxel/nsa310s/nsa310s.c
> >> index cd4a7723b1..29aded1910 100644
> >> --- a/board/zyxel/nsa310s/nsa310s.c
> >> +++ b/board/zyxel/nsa310s/nsa310s.c
> >> @@ -1,5 +1,6 @@
> >>   // SPDX-License-Identifier: GPL-2.0+
> >>   /*
> >> + * Copyright (C) 2021 Tony Dinh <mibodhi@gmail.com>
> >
> > AFAIU, just changing a few lines, as this patch does, does not justify
> > to add a copyright notice to this file.
>
> I just noticed that you already are present in the copyright notice
> below. I suggest to change this in a way, so that your name only
> occurs once, like:
>
> * Copyright (C) 2015, 2021 Tony Dinh <mibodhi@gmail.com>
>
> Does this make sense?

Definitely! I will correct the copyright for this patch and also the
copyright in patch 4/4 using this convention.

>
> Thanks,
> Stefan
>
> >>    * Copyright (C) 2015
> >>    * Gerald Kerma <dreagle@doukki.net>
> >>    * Tony Dinh <mibodhi@gmail.com>
> >> @@ -81,22 +82,18 @@ int board_init(void)
> >>       return 0;
> >>   }
> >> +#define PHY_ADR    1
> >
> > You should be able to read this PHY address from the device-tree now.
> > No need to define this here again.

I don't know yet how to extract this info from the device tree nodes (I am
familiar with this in Linux kernel, but at first glance it seems like
u-boot fdt library is different).

So if it is OK, perhaps I could send in another patch for this correction
after this DM conversion is done.

Thanks,
Tony

Re: [PATCH 0/4] Zyxel NSA310S NAS : convert to Driver Model.

[Stefan Roese]

On 01.07.21 06:26, Tony Dinh wrote:
> 
> - Add device tree kirkwood-nsa310s.dts
> - Add DM_USB, DM_ETH, DM_SATA and associated configs to nsa310s_defconfig
> - Move some miscellaneous configs from board file to nsa310s_defconfig
> - Replace old device name "egiga0" with Ethernet PHY name
> from device tree kirkwood.dtsi
> - Removed IDE, and add SATA configs in board file nsa310s.c
> 
> 
> Tony Dinh (4):
>    NSA310S : Add device tree DTS for Zyxel NSA310S board
>    NSA310S : Add DM USB, DM Ethernet, and DM SATA configs
>    NSA310S : Use Ethernet PHY name from device tree
>    NSA310S : Add DM SATA configs
> 
>   arch/arm/dts/Makefile             |   1 +
>   arch/arm/dts/kirkwood-nsa310s.dts | 318 ++++++++++++++++++++++++++++++
>   board/zyxel/nsa310s/nsa310s.c     |  15 +-
>   configs/nsa310s_defconfig         |  12 +-
>   include/configs/nsa310s.h         |   9 +-
>   5 files changed, 342 insertions(+), 13 deletions(-)
>   create mode 100644 arch/arm/dts/kirkwood-nsa310s.dts
> 

Applied to u-boot-marvell/master

Thanks,
Stefan

Re: [PATCH 0/4] Zyxel NSA310S NAS : convert to Driver Model

[Stefan Roese]

Hi Tony,

On 29.06.21 05:43, Tony (bodhi) wrote:
> 
> - Add device tree kirkwood-nsa310s.dts
> 
> - Add DM_USB, DM_ETH, DM_SATA and associated configs to nsa310s_defconfig
> 
> - Move some miscellaneous configs from board file to nsa310s_defconfig
> 
> - Replace old device name "egiga0" with Ethernet PHY name
> 
> from device tree kirkwood.dtsi
> 
> - Removed IDE, and add SATA configs in board file nsa310s.c

I don't see the other mails (1...4) from this series. Not in my INBOX
and not on the U-Boot list. Also the formatting of this mails seems
wrong.

Please note that most mail clients corrupt patches while sending. It's
much easier to use "git send-email" to send patches to the lists.

Thanks,
Stefan

> 
> 
> Tony Dinh (4):
> 
>    NSA310S : Add device tree DTS for Zyxel NSA310S board
> 
>    NSA310S : Add DM USB, DM Ethernet, and DM SATA configs
> 
>    NSA310S : Use Ethernet PHY name from device tree
> 
>    NSA310S : Add DM SATA configs
> 
> 
>   arch/arm/dts/Makefile             |   1 +
> 
>   arch/arm/dts/kirkwood-nsa310s.dts | 318 ++++++++++++++++++++++++++++++
> 
>   board/zyxel/nsa310s/nsa310s.c     |  15 +-
> 
>   configs/nsa310s_defconfig         |  12 +-
> 
>   include/configs/nsa310s.h         |  10 +-
> 
>   5 files changed, 343 insertions(+), 13 deletions(-)
> 
>   create mode 100644 arch/arm/dts/kirkwood-nsa310s.dts
> 
> 
> -- 
> 
> 2.20.1
> 
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de

[PATCH 0/4] Zyxel NSA310S NAS : convert to Driver Model

[Tony (bodhi)]

- Add device tree kirkwood-nsa310s.dts

- Add DM_USB, DM_ETH, DM_SATA and associated configs to nsa310s_defconfig

- Move some miscellaneous configs from board file to nsa310s_defconfig

- Replace old device name "egiga0" with Ethernet PHY name

from device tree kirkwood.dtsi

- Removed IDE, and add SATA configs in board file nsa310s.c



Tony Dinh (4):

  NSA310S : Add device tree DTS for Zyxel NSA310S board

  NSA310S : Add DM USB, DM Ethernet, and DM SATA configs

  NSA310S : Use Ethernet PHY name from device tree

  NSA310S : Add DM SATA configs


 arch/arm/dts/Makefile             |   1 +

 arch/arm/dts/kirkwood-nsa310s.dts | 318 ++++++++++++++++++++++++++++++

 board/zyxel/nsa310s/nsa310s.c     |  15 +-

 configs/nsa310s_defconfig         |  12 +-

 include/configs/nsa310s.h         |  10 +-

 5 files changed, 343 insertions(+), 13 deletions(-)

 create mode 100644 arch/arm/dts/kirkwood-nsa310s.dts


-- 

2.20.1