[PATCH] ASoC: hdac_hdmi: support 'ELD' mixer

[PATCH] ASoC: hdac_hdmi: support 'ELD' mixer

[Brent Lu]

Add an binary mixer 'ELD' to each HDMI PCM device so user space
could read the ELD data of external HDMI display.

Signed-off-by: Brent Lu <brent.lu@intel.com>
---
 sound/soc/codecs/hdac_hdmi.c | 139 +++++++++++++++++++++++++++++++++++
 1 file changed, 139 insertions(+)

diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c
index f26b77faed59..83656bbf22a7 100644
--- a/sound/soc/codecs/hdac_hdmi.c
+++ b/sound/soc/codecs/hdac_hdmi.c
@@ -9,6 +9,7 @@
  *
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  */
+
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/module.h>
@@ -107,6 +108,7 @@ struct hdac_hdmi_pcm {
 	unsigned char chmap[8]; /* ALSA API channel-map */
 	struct mutex lock;
 	int jack_event;
+	struct snd_kcontrol *eld_ctl;
 };
 
 struct hdac_hdmi_dai_port_map {
@@ -1248,6 +1250,7 @@ static void hdac_hdmi_present_sense(struct hdac_hdmi_pin *pin,
 	struct hdac_hdmi_pcm *pcm;
 	int size = 0;
 	int port_id = -1;
+	bool eld_valid, eld_changed;
 
 	if (!hdmi)
 		return;
@@ -1273,6 +1276,8 @@ static void hdac_hdmi_present_sense(struct hdac_hdmi_pin *pin,
 			size = -EINVAL;
 	}
 
+	eld_valid = port->eld.eld_valid;
+
 	if (size > 0) {
 		port->eld.eld_valid = true;
 		port->eld.eld_size = size;
@@ -1281,6 +1286,8 @@ static void hdac_hdmi_present_sense(struct hdac_hdmi_pin *pin,
 		port->eld.eld_size = 0;
 	}
 
+	eld_changed = (eld_valid != port->eld.eld_valid);
+
 	pcm = hdac_hdmi_get_pcm(hdev, port);
 
 	if (!port->eld.monitor_present || !port->eld.eld_valid) {
@@ -1313,6 +1320,12 @@ static void hdac_hdmi_present_sense(struct hdac_hdmi_pin *pin,
 
 	}
 	mutex_unlock(&hdmi->pin_mutex);
+
+	if (eld_changed && pcm)
+		snd_ctl_notify(hdmi->card,
+			       SNDRV_CTL_EVENT_MASK_VALUE |
+			       SNDRV_CTL_EVENT_MASK_INFO,
+			       &pcm->eld_ctl->id);
 }
 
 static int hdac_hdmi_add_ports(struct hdac_device *hdev,
@@ -1411,6 +1424,122 @@ static void hdac_hdmi_skl_enable_dp12(struct hdac_device *hdev)
 
 }
 
+static int hdac_hdmi_eld_ctl_info(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_info *uinfo)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct hdac_hdmi_priv *hdmi = snd_soc_component_get_drvdata(component);
+	struct hdac_hdmi_pcm *pcm;
+	struct hdac_hdmi_port *port;
+	struct hdac_hdmi_eld *eld;
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES;
+	uinfo->count = 0;
+
+	pcm = get_hdmi_pcm_from_id(hdmi, kcontrol->id.device);
+	if (!pcm) {
+		dev_dbg(component->dev, "%s: no pcm, device %d\n", __func__,
+			kcontrol->id.device);
+		return 0;
+	}
+
+	if (list_empty(&pcm->port_list)) {
+		dev_dbg(component->dev, "%s: empty port list, device %d\n",
+			__func__, kcontrol->id.device);
+		return 0;
+	}
+
+	mutex_lock(&hdmi->pin_mutex);
+
+	list_for_each_entry(port, &pcm->port_list, head) {
+		eld = &port->eld;
+
+		if (eld->eld_valid) {
+			uinfo->count = eld->eld_size;
+			break;
+		}
+	}
+
+	mutex_unlock(&hdmi->pin_mutex);
+
+	return 0;
+}
+
+static int hdac_hdmi_eld_ctl_get(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct hdac_hdmi_priv *hdmi = snd_soc_component_get_drvdata(component);
+	struct hdac_hdmi_pcm *pcm;
+	struct hdac_hdmi_port *port;
+	struct hdac_hdmi_eld *eld;
+
+	memset(ucontrol->value.bytes.data, 0, ARRAY_SIZE(ucontrol->value.bytes.data));
+
+	pcm = get_hdmi_pcm_from_id(hdmi, kcontrol->id.device);
+	if (!pcm) {
+		dev_dbg(component->dev, "%s: no pcm, device %d\n", __func__,
+			kcontrol->id.device);
+		return 0;
+	}
+
+	if (list_empty(&pcm->port_list)) {
+		dev_dbg(component->dev, "%s: empty port list, device %d\n",
+			__func__, kcontrol->id.device);
+		return 0;
+	}
+
+	mutex_lock(&hdmi->pin_mutex);
+
+	list_for_each_entry(port, &pcm->port_list, head) {
+		eld = &port->eld;
+
+		if (!eld->eld_valid)
+			continue;
+
+		if (eld->eld_size > ARRAY_SIZE(ucontrol->value.bytes.data) ||
+		    eld->eld_size > ELD_MAX_SIZE) {
+			mutex_unlock(&hdmi->pin_mutex);
+
+			dev_err(component->dev, "%s: buffer too small, device %d eld_size %d\n",
+				__func__, kcontrol->id.device, eld->eld_size);
+			snd_BUG();
+			return -EINVAL;
+		}
+
+		memcpy(ucontrol->value.bytes.data, eld->eld_buffer,
+		       eld->eld_size);
+		break;
+	}
+
+	mutex_unlock(&hdmi->pin_mutex);
+
+	return 0;
+}
+
+static int hdac_hdmi_create_eld_ctl(struct snd_soc_component *component, struct hdac_hdmi_pcm *pcm)
+{
+	struct snd_kcontrol *kctl;
+	struct snd_kcontrol_new hdmi_eld_ctl = {
+		.access	= SNDRV_CTL_ELEM_ACCESS_READ |
+			  SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+		.iface	= SNDRV_CTL_ELEM_IFACE_PCM,
+		.name	= "ELD",
+		.info	= hdac_hdmi_eld_ctl_info,
+		.get	= hdac_hdmi_eld_ctl_get,
+		.device	= pcm->pcm_id,
+	};
+
+	/* add ELD ctl with the device number corresponding to the PCM stream */
+	kctl = snd_ctl_new1(&hdmi_eld_ctl, component);
+	if (!kctl)
+		return -ENOMEM;
+
+	pcm->eld_ctl = kctl;
+
+	return snd_ctl_add(component->card->snd_card, kctl);
+}
+
 static const struct snd_soc_dai_ops hdmi_dai_ops = {
 	.startup = hdac_hdmi_pcm_open,
 	.shutdown = hdac_hdmi_pcm_close,
@@ -1784,6 +1913,16 @@ int hdac_hdmi_jack_init(struct snd_soc_dai *dai, int device,
 		}
 	}
 
+	/* add control for ELD Bytes */
+	err = hdac_hdmi_create_eld_ctl(component, pcm);
+	if (err < 0) {
+		dev_err(&hdev->dev,
+			"eld control add failed with err: %d for pcm: %d\n",
+			err, device);
+		kfree(pcm);
+		return err;
+	}
+
 	list_add_tail(&pcm->head, &hdmi->pcm_list);
 
 	return 0;
-- 
2.17.1

Re: [PATCH] ASoC: hdac_hdmi: support 'ELD' mixer

[Takashi Iwai]

On Fri, 14 Aug 2020 10:34:36 +0200,
Brent Lu wrote:
> @@ -1784,6 +1913,16 @@ int hdac_hdmi_jack_init(struct snd_soc_dai *dai, int device,
>  		}
>  	}
>  
> +	/* add control for ELD Bytes */
> +	err = hdac_hdmi_create_eld_ctl(component, pcm);
> +	if (err < 0) {
> +		dev_err(&hdev->dev,
> +			"eld control add failed with err: %d for pcm: %d\n",
> +			err, device);
> +		kfree(pcm);

pcm is allocated vida devm_kzalloc(), hence you shoudn't free it
explicitly.


thanks,

Takashi

RE: [PATCH] ASoC: hdac_hdmi: support 'ELD' mixer

[Lu, Brent]

> > +	/* add control for ELD Bytes */
> > +	err = hdac_hdmi_create_eld_ctl(component, pcm);
> > +	if (err < 0) {
> > +		dev_err(&hdev->dev,
> > +			"eld control add failed with err: %d for pcm: %d\n",
> > +			err, device);
> > +		kfree(pcm);
> 
> pcm is allocated vida devm_kzalloc(), hence you shoudn't free it explicitly.
Will fix it in v2. Thanks.

Brent
> 
> 
> thanks,
> 
> Takashi

[PATCH v2] ASoC: hdac_hdmi: support 'ELD' mixer

[Brent Lu]

Add an binary mixer 'ELD' to each HDMI PCM device so user space
could read the ELD data of external HDMI display.

Signed-off-by: Brent Lu <brent.lu@intel.com>
---
 sound/soc/codecs/hdac_hdmi.c | 138 +++++++++++++++++++++++++++++++++++
 1 file changed, 138 insertions(+)

diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c
index f26b77faed59..869d1547ae5d 100644
--- a/sound/soc/codecs/hdac_hdmi.c
+++ b/sound/soc/codecs/hdac_hdmi.c
@@ -9,6 +9,7 @@
  *
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  */
+
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/module.h>
@@ -107,6 +108,7 @@ struct hdac_hdmi_pcm {
 	unsigned char chmap[8]; /* ALSA API channel-map */
 	struct mutex lock;
 	int jack_event;
+	struct snd_kcontrol *eld_ctl;
 };
 
 struct hdac_hdmi_dai_port_map {
@@ -1248,6 +1250,7 @@ static void hdac_hdmi_present_sense(struct hdac_hdmi_pin *pin,
 	struct hdac_hdmi_pcm *pcm;
 	int size = 0;
 	int port_id = -1;
+	bool eld_valid, eld_changed;
 
 	if (!hdmi)
 		return;
@@ -1273,6 +1276,8 @@ static void hdac_hdmi_present_sense(struct hdac_hdmi_pin *pin,
 			size = -EINVAL;
 	}
 
+	eld_valid = port->eld.eld_valid;
+
 	if (size > 0) {
 		port->eld.eld_valid = true;
 		port->eld.eld_size = size;
@@ -1281,6 +1286,8 @@ static void hdac_hdmi_present_sense(struct hdac_hdmi_pin *pin,
 		port->eld.eld_size = 0;
 	}
 
+	eld_changed = (eld_valid != port->eld.eld_valid);
+
 	pcm = hdac_hdmi_get_pcm(hdev, port);
 
 	if (!port->eld.monitor_present || !port->eld.eld_valid) {
@@ -1313,6 +1320,12 @@ static void hdac_hdmi_present_sense(struct hdac_hdmi_pin *pin,
 
 	}
 	mutex_unlock(&hdmi->pin_mutex);
+
+	if (eld_changed && pcm)
+		snd_ctl_notify(hdmi->card,
+			       SNDRV_CTL_EVENT_MASK_VALUE |
+			       SNDRV_CTL_EVENT_MASK_INFO,
+			       &pcm->eld_ctl->id);
 }
 
 static int hdac_hdmi_add_ports(struct hdac_device *hdev,
@@ -1411,6 +1424,122 @@ static void hdac_hdmi_skl_enable_dp12(struct hdac_device *hdev)
 
 }
 
+static int hdac_hdmi_eld_ctl_info(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_info *uinfo)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct hdac_hdmi_priv *hdmi = snd_soc_component_get_drvdata(component);
+	struct hdac_hdmi_pcm *pcm;
+	struct hdac_hdmi_port *port;
+	struct hdac_hdmi_eld *eld;
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES;
+	uinfo->count = 0;
+
+	pcm = get_hdmi_pcm_from_id(hdmi, kcontrol->id.device);
+	if (!pcm) {
+		dev_dbg(component->dev, "%s: no pcm, device %d\n", __func__,
+			kcontrol->id.device);
+		return 0;
+	}
+
+	if (list_empty(&pcm->port_list)) {
+		dev_dbg(component->dev, "%s: empty port list, device %d\n",
+			__func__, kcontrol->id.device);
+		return 0;
+	}
+
+	mutex_lock(&hdmi->pin_mutex);
+
+	list_for_each_entry(port, &pcm->port_list, head) {
+		eld = &port->eld;
+
+		if (eld->eld_valid) {
+			uinfo->count = eld->eld_size;
+			break;
+		}
+	}
+
+	mutex_unlock(&hdmi->pin_mutex);
+
+	return 0;
+}
+
+static int hdac_hdmi_eld_ctl_get(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct hdac_hdmi_priv *hdmi = snd_soc_component_get_drvdata(component);
+	struct hdac_hdmi_pcm *pcm;
+	struct hdac_hdmi_port *port;
+	struct hdac_hdmi_eld *eld;
+
+	memset(ucontrol->value.bytes.data, 0, ARRAY_SIZE(ucontrol->value.bytes.data));
+
+	pcm = get_hdmi_pcm_from_id(hdmi, kcontrol->id.device);
+	if (!pcm) {
+		dev_dbg(component->dev, "%s: no pcm, device %d\n", __func__,
+			kcontrol->id.device);
+		return 0;
+	}
+
+	if (list_empty(&pcm->port_list)) {
+		dev_dbg(component->dev, "%s: empty port list, device %d\n",
+			__func__, kcontrol->id.device);
+		return 0;
+	}
+
+	mutex_lock(&hdmi->pin_mutex);
+
+	list_for_each_entry(port, &pcm->port_list, head) {
+		eld = &port->eld;
+
+		if (!eld->eld_valid)
+			continue;
+
+		if (eld->eld_size > ARRAY_SIZE(ucontrol->value.bytes.data) ||
+		    eld->eld_size > ELD_MAX_SIZE) {
+			mutex_unlock(&hdmi->pin_mutex);
+
+			dev_err(component->dev, "%s: buffer too small, device %d eld_size %d\n",
+				__func__, kcontrol->id.device, eld->eld_size);
+			snd_BUG();
+			return -EINVAL;
+		}
+
+		memcpy(ucontrol->value.bytes.data, eld->eld_buffer,
+		       eld->eld_size);
+		break;
+	}
+
+	mutex_unlock(&hdmi->pin_mutex);
+
+	return 0;
+}
+
+static int hdac_hdmi_create_eld_ctl(struct snd_soc_component *component, struct hdac_hdmi_pcm *pcm)
+{
+	struct snd_kcontrol *kctl;
+	struct snd_kcontrol_new hdmi_eld_ctl = {
+		.access	= SNDRV_CTL_ELEM_ACCESS_READ |
+			  SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+		.iface	= SNDRV_CTL_ELEM_IFACE_PCM,
+		.name	= "ELD",
+		.info	= hdac_hdmi_eld_ctl_info,
+		.get	= hdac_hdmi_eld_ctl_get,
+		.device	= pcm->pcm_id,
+	};
+
+	/* add ELD ctl with the device number corresponding to the PCM stream */
+	kctl = snd_ctl_new1(&hdmi_eld_ctl, component);
+	if (!kctl)
+		return -ENOMEM;
+
+	pcm->eld_ctl = kctl;
+
+	return snd_ctl_add(component->card->snd_card, kctl);
+}
+
 static const struct snd_soc_dai_ops hdmi_dai_ops = {
 	.startup = hdac_hdmi_pcm_open,
 	.shutdown = hdac_hdmi_pcm_close,
@@ -1784,6 +1913,15 @@ int hdac_hdmi_jack_init(struct snd_soc_dai *dai, int device,
 		}
 	}
 
+	/* add control for ELD Bytes */
+	err = hdac_hdmi_create_eld_ctl(component, pcm);
+	if (err < 0) {
+		dev_err(&hdev->dev,
+			"eld control add failed with err: %d for pcm: %d\n",
+			err, device);
+		return err;
+	}
+
 	list_add_tail(&pcm->head, &hdmi->pcm_list);
 
 	return 0;
-- 
2.17.1

Re: [PATCH v2] ASoC: hdac_hdmi: support 'ELD' mixer

[Kai Vehmanen]

Hey,

a general comment first. We are trying to move development to patch_hdmi, 
but given we still have platforms using hdac_hdmi, this patch seems like a 
useful addition.

On Tue, 18 Aug 2020, Brent Lu wrote:

> Add an binary mixer 'ELD' to each HDMI PCM device so user space
> could read the ELD data of external HDMI display.

Minor spelling fixes:
"Add a binary mixer"
"so user space can read"

> +static int hdac_hdmi_eld_ctl_get(struct snd_kcontrol *kcontrol,
> +			    struct snd_ctl_elem_value *ucontrol)
> +{
[...]
> +	list_for_each_entry(port, &pcm->port_list, head) {
> +		eld = &port->eld;
> +
[...]
> +		memcpy(ucontrol->value.bytes.data, eld->eld_buffer,
> +		       eld->eld_size);
> +		break;
> +	}

This is a bit iffy part. If same PCM is connected to multiple receivers, 
you return ELD data for the first one and ignore the rest. OTOH, this is 
inline with comment in hdac_hdmi_get_port_from_cvt() in that this 
pcm-to-many routing is not really supported by the driver now. But
jack status reporting is done a port basis, not per PCM/CVTs, so this is 
not fully aligned.

Hmm. Given the proposed patch is aligned with the user-space interface 
exposed by patch_hdmi.c, I'm ok to go with this. Can you add an explicit 
comment to explain what is happening above?

Br, Kai

RE: [PATCH v2] ASoC: hdac_hdmi: support 'ELD' mixer

[Lu, Brent]

> 
> This is a bit iffy part. If same PCM is connected to multiple receivers, you
> return ELD data for the first one and ignore the rest. OTOH, this is inline with
> comment in hdac_hdmi_get_port_from_cvt() in that this pcm-to-many
> routing is not really supported by the driver now. But jack status reporting is
> done a port basis, not per PCM/CVTs, so this is not fully aligned.
> 
> Hmm. Given the proposed patch is aligned with the user-space interface
> exposed by patch_hdmi.c, I'm ok to go with this. Can you add an explicit
> comment to explain what is happening above?
> 
> Br, Kai

Fix it in v3. Thank you for the review.


Regards,
Brent

[PATCH v3] ASoC: hdac_hdmi: support 'ELD' mixer

[Brent Lu]

Add a binary mixer 'ELD' to each HDMI PCM device so user-space can
read the ELD data of external HDMI display.

If same PCM is connected to multiple receivers, the mixer returns the
ELD data for the first one found in the port list and ignore the rest.
Thie behavior seems iffy but is aligned with the user-space interface
exposed by patch_hdmi.c. Also the pcm-to-many routing is nor really
supported by the driver now.

Signed-off-by: Brent Lu <brent.lu@intel.com>
---
 sound/soc/codecs/hdac_hdmi.c | 138 +++++++++++++++++++++++++++++++++++
 1 file changed, 138 insertions(+)

diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c
index f26b77faed59..869d1547ae5d 100644
--- a/sound/soc/codecs/hdac_hdmi.c
+++ b/sound/soc/codecs/hdac_hdmi.c
@@ -9,6 +9,7 @@
  *
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  */
+
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/module.h>
@@ -107,6 +108,7 @@ struct hdac_hdmi_pcm {
 	unsigned char chmap[8]; /* ALSA API channel-map */
 	struct mutex lock;
 	int jack_event;
+	struct snd_kcontrol *eld_ctl;
 };
 
 struct hdac_hdmi_dai_port_map {
@@ -1248,6 +1250,7 @@ static void hdac_hdmi_present_sense(struct hdac_hdmi_pin *pin,
 	struct hdac_hdmi_pcm *pcm;
 	int size = 0;
 	int port_id = -1;
+	bool eld_valid, eld_changed;
 
 	if (!hdmi)
 		return;
@@ -1273,6 +1276,8 @@ static void hdac_hdmi_present_sense(struct hdac_hdmi_pin *pin,
 			size = -EINVAL;
 	}
 
+	eld_valid = port->eld.eld_valid;
+
 	if (size > 0) {
 		port->eld.eld_valid = true;
 		port->eld.eld_size = size;
@@ -1281,6 +1286,8 @@ static void hdac_hdmi_present_sense(struct hdac_hdmi_pin *pin,
 		port->eld.eld_size = 0;
 	}
 
+	eld_changed = (eld_valid != port->eld.eld_valid);
+
 	pcm = hdac_hdmi_get_pcm(hdev, port);
 
 	if (!port->eld.monitor_present || !port->eld.eld_valid) {
@@ -1313,6 +1320,12 @@ static void hdac_hdmi_present_sense(struct hdac_hdmi_pin *pin,
 
 	}
 	mutex_unlock(&hdmi->pin_mutex);
+
+	if (eld_changed && pcm)
+		snd_ctl_notify(hdmi->card,
+			       SNDRV_CTL_EVENT_MASK_VALUE |
+			       SNDRV_CTL_EVENT_MASK_INFO,
+			       &pcm->eld_ctl->id);
 }
 
 static int hdac_hdmi_add_ports(struct hdac_device *hdev,
@@ -1411,6 +1424,122 @@ static void hdac_hdmi_skl_enable_dp12(struct hdac_device *hdev)
 
 }
 
+static int hdac_hdmi_eld_ctl_info(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_info *uinfo)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct hdac_hdmi_priv *hdmi = snd_soc_component_get_drvdata(component);
+	struct hdac_hdmi_pcm *pcm;
+	struct hdac_hdmi_port *port;
+	struct hdac_hdmi_eld *eld;
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES;
+	uinfo->count = 0;
+
+	pcm = get_hdmi_pcm_from_id(hdmi, kcontrol->id.device);
+	if (!pcm) {
+		dev_dbg(component->dev, "%s: no pcm, device %d\n", __func__,
+			kcontrol->id.device);
+		return 0;
+	}
+
+	if (list_empty(&pcm->port_list)) {
+		dev_dbg(component->dev, "%s: empty port list, device %d\n",
+			__func__, kcontrol->id.device);
+		return 0;
+	}
+
+	mutex_lock(&hdmi->pin_mutex);
+
+	list_for_each_entry(port, &pcm->port_list, head) {
+		eld = &port->eld;
+
+		if (eld->eld_valid) {
+			uinfo->count = eld->eld_size;
+			break;
+		}
+	}
+
+	mutex_unlock(&hdmi->pin_mutex);
+
+	return 0;
+}
+
+static int hdac_hdmi_eld_ctl_get(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct hdac_hdmi_priv *hdmi = snd_soc_component_get_drvdata(component);
+	struct hdac_hdmi_pcm *pcm;
+	struct hdac_hdmi_port *port;
+	struct hdac_hdmi_eld *eld;
+
+	memset(ucontrol->value.bytes.data, 0, ARRAY_SIZE(ucontrol->value.bytes.data));
+
+	pcm = get_hdmi_pcm_from_id(hdmi, kcontrol->id.device);
+	if (!pcm) {
+		dev_dbg(component->dev, "%s: no pcm, device %d\n", __func__,
+			kcontrol->id.device);
+		return 0;
+	}
+
+	if (list_empty(&pcm->port_list)) {
+		dev_dbg(component->dev, "%s: empty port list, device %d\n",
+			__func__, kcontrol->id.device);
+		return 0;
+	}
+
+	mutex_lock(&hdmi->pin_mutex);
+
+	list_for_each_entry(port, &pcm->port_list, head) {
+		eld = &port->eld;
+
+		if (!eld->eld_valid)
+			continue;
+
+		if (eld->eld_size > ARRAY_SIZE(ucontrol->value.bytes.data) ||
+		    eld->eld_size > ELD_MAX_SIZE) {
+			mutex_unlock(&hdmi->pin_mutex);
+
+			dev_err(component->dev, "%s: buffer too small, device %d eld_size %d\n",
+				__func__, kcontrol->id.device, eld->eld_size);
+			snd_BUG();
+			return -EINVAL;
+		}
+
+		memcpy(ucontrol->value.bytes.data, eld->eld_buffer,
+		       eld->eld_size);
+		break;
+	}
+
+	mutex_unlock(&hdmi->pin_mutex);
+
+	return 0;
+}
+
+static int hdac_hdmi_create_eld_ctl(struct snd_soc_component *component, struct hdac_hdmi_pcm *pcm)
+{
+	struct snd_kcontrol *kctl;
+	struct snd_kcontrol_new hdmi_eld_ctl = {
+		.access	= SNDRV_CTL_ELEM_ACCESS_READ |
+			  SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+		.iface	= SNDRV_CTL_ELEM_IFACE_PCM,
+		.name	= "ELD",
+		.info	= hdac_hdmi_eld_ctl_info,
+		.get	= hdac_hdmi_eld_ctl_get,
+		.device	= pcm->pcm_id,
+	};
+
+	/* add ELD ctl with the device number corresponding to the PCM stream */
+	kctl = snd_ctl_new1(&hdmi_eld_ctl, component);
+	if (!kctl)
+		return -ENOMEM;
+
+	pcm->eld_ctl = kctl;
+
+	return snd_ctl_add(component->card->snd_card, kctl);
+}
+
 static const struct snd_soc_dai_ops hdmi_dai_ops = {
 	.startup = hdac_hdmi_pcm_open,
 	.shutdown = hdac_hdmi_pcm_close,
@@ -1784,6 +1913,15 @@ int hdac_hdmi_jack_init(struct snd_soc_dai *dai, int device,
 		}
 	}
 
+	/* add control for ELD Bytes */
+	err = hdac_hdmi_create_eld_ctl(component, pcm);
+	if (err < 0) {
+		dev_err(&hdev->dev,
+			"eld control add failed with err: %d for pcm: %d\n",
+			err, device);
+		return err;
+	}
+
 	list_add_tail(&pcm->head, &hdmi->pcm_list);
 
 	return 0;
-- 
2.17.1

Re: [PATCH v3] ASoC: hdac_hdmi: support 'ELD' mixer

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 291 bytes --]

On Tue, Aug 18, 2020 at 10:36:32PM +0800, Brent Lu wrote:
> Add a binary mixer 'ELD' to each HDMI PCM device so user-space can
> read the ELD data of external HDMI display.

Please don't send new patches in the middle of existing threads, it
makes it hard to keep track fo what is going on.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

RE: [PATCH v3] ASoC: hdac_hdmi: support 'ELD' mixer

[Lu, Brent]

> 
> Please don't send new patches in the middle of existing threads, it makes it
> hard to keep track fo what is going on.

Sorry for the problem. Does it mean I should avoid using " --in-reply-to=" when
sending new patch set?


Regards,
Brent

Re: [PATCH v3] ASoC: hdac_hdmi: support 'ELD' mixer

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 307 bytes --]

On Tue, Aug 18, 2020 at 03:22:03PM +0000, Lu, Brent wrote:

> > Please don't send new patches in the middle of existing threads, it makes it
> > hard to keep track fo what is going on.

> Sorry for the problem. Does it mean I should avoid using " --in-reply-to=" when
> sending new patch set?

Yes, please.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v3] ASoC: hdac_hdmi: support 'ELD' mixer

[Mark Brown]

On Tue, 18 Aug 2020 22:36:32 +0800, Brent Lu wrote:
> Add a binary mixer 'ELD' to each HDMI PCM device so user-space can
> read the ELD data of external HDMI display.
> 
> If same PCM is connected to multiple receivers, the mixer returns the
> ELD data for the first one found in the port list and ignore the rest.
> Thie behavior seems iffy but is aligned with the user-space interface
> exposed by patch_hdmi.c. Also the pcm-to-many routing is nor really
> supported by the driver now.

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: hdac_hdmi: support 'ELD' mixer
      commit: 1f53bcb3fc952b55a0ad0e7f6eabfc93a170659d

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: [PATCH v3] ASoC: hdac_hdmi: support 'ELD' mixer

[Mark Brown]

On Tue, 18 Aug 2020 22:36:32 +0800, Brent Lu wrote:
> Add a binary mixer 'ELD' to each HDMI PCM device so user-space can
> read the ELD data of external HDMI display.
> 
> If same PCM is connected to multiple receivers, the mixer returns the
> ELD data for the first one found in the port list and ignore the rest.
> Thie behavior seems iffy but is aligned with the user-space interface
> exposed by patch_hdmi.c. Also the pcm-to-many routing is nor really
> supported by the driver now.

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: hdac_hdmi: support 'ELD' mixer
      commit: 1f53bcb3fc952b55a0ad0e7f6eabfc93a170659d

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: [PATCH v2] ASoC: hdac_hdmi: support 'ELD' mixer

[Mark Brown]

On Tue, 18 Aug 2020 08:44:13 +0800, Brent Lu wrote:
> Add an binary mixer 'ELD' to each HDMI PCM device so user space
> could read the ELD data of external HDMI display.

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: hdac_hdmi: support 'ELD' mixer
      commit: 1f53bcb3fc952b55a0ad0e7f6eabfc93a170659d

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark