DPDK-dev Archive on lore.kernel.org
 help / color / Atom feed
* [dpdk-dev] [PATCH 0/3] move mbuf definition into a separate file
@ 2019-08-16 12:53 Konstantin Ananyev
  2019-08-16 12:53 ` [dpdk-dev] [PATCH 1/3] eal: move CACHE and IOVA related definitions Konstantin Ananyev
                   ` (2 more replies)
  0 siblings, 3 replies; 7+ messages in thread
From: Konstantin Ananyev @ 2019-08-16 12:53 UTC (permalink / raw)
  To: dev
  Cc: michel, olivier.matz, anatoly.burakov, vipin.varghese,
	Konstantin Ananyev

Right now inclusion of rte_mbuf.h header can cause inclusion of
some arch/os specific headers.
That prevents it to be included directly by some
non-DPDK (but related) entities: KNI, BPF programs, etc.
To overcome that problem usually a separate definitions of rte_mbuf
structure is created within these entities.
That aproach has a lot of drawbacks: code duplication, error prone, etc.
This series moves rte_mbuf structure definition (and some related macros)
into a separate file that can be included by both rte_mbuf.h and
other non-DPDK entities.

Note that these moves shouldn't introduce any change for current DPDK code.

Konstantin Ananyev (3):
  eal: move CACHE and IOVA related definitions
  mbuf: move mbuf definition into a separate file
  examples/bpf: remove duplicate mbuf definition

 examples/bpf/t2.c                             |   5 +-
 examples/bpf/t3.c                             |   3 +-
 lib/librte_eal/common/include/rte_common.h    |  44 ++
 lib/librte_eal/common/include/rte_memory.h    |  38 -
 lib/librte_mbuf/Makefile                      |   5 +-
 lib/librte_mbuf/meson.build                   |   3 +-
 lib/librte_mbuf/rte_mbuf.h                    | 738 +-----------------
 .../mbuf.h => lib/librte_mbuf/rte_mbuf_core.h | 556 ++++++++-----
 8 files changed, 428 insertions(+), 964 deletions(-)
 rename examples/bpf/mbuf.h => lib/librte_mbuf/rte_mbuf_core.h (51%)

-- 
2.17.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [dpdk-dev] [PATCH 1/3] eal: move CACHE and IOVA related definitions
  2019-08-16 12:53 [dpdk-dev] [PATCH 0/3] move mbuf definition into a separate file Konstantin Ananyev
@ 2019-08-16 12:53 ` Konstantin Ananyev
  2019-08-16 18:50   ` Michel Machado
  2019-08-16 12:53 ` [dpdk-dev] [PATCH 2/3] mbuf: move mbuf definition into a separate file Konstantin Ananyev
  2019-08-16 12:53 ` [dpdk-dev] [PATCH 3/3] examples/bpf: remove duplicate mbuf definition Konstantin Ananyev
  2 siblings, 1 reply; 7+ messages in thread
From: Konstantin Ananyev @ 2019-08-16 12:53 UTC (permalink / raw)
  To: dev
  Cc: michel, olivier.matz, anatoly.burakov, vipin.varghese,
	Konstantin Ananyev

Right now RTE_CACHE_ and IOVA definitions are located inside rte_memory.h
That might cause an unwanted inclusions of arch/os specific header files.
See [1] for particular problem example.
Probably the simplest way to deal with such problems -
move these definitions into rte_commmon.h

Note that this move doesn't introduce any change in functionality.

[1] https://bugs.dpdk.org/show_bug.cgi?id=321

Suggested-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
 lib/librte_eal/common/include/rte_common.h | 44 ++++++++++++++++++++++
 lib/librte_eal/common/include/rte_memory.h | 38 -------------------
 2 files changed, 44 insertions(+), 38 deletions(-)

diff --git a/lib/librte_eal/common/include/rte_common.h b/lib/librte_eal/common/include/rte_common.h
index 05a3a6401..c275093d7 100644
--- a/lib/librte_eal/common/include/rte_common.h
+++ b/lib/librte_eal/common/include/rte_common.h
@@ -291,6 +291,50 @@ rte_is_aligned(void *ptr, unsigned align)
  */
 #define RTE_BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
 
+/*********** RTE_CACHE related macros ********/
+
+#define RTE_CACHE_LINE_MASK (RTE_CACHE_LINE_SIZE-1) /**< Cache line mask. */
+
+#define RTE_CACHE_LINE_ROUNDUP(size) \
+	(RTE_CACHE_LINE_SIZE * ((size + RTE_CACHE_LINE_SIZE - 1) / \
+	RTE_CACHE_LINE_SIZE))
+/**< Return the first cache-aligned value greater or equal to size. */
+
+/**< Cache line size in terms of log2 */
+#if RTE_CACHE_LINE_SIZE == 64
+#define RTE_CACHE_LINE_SIZE_LOG2 6
+#elif RTE_CACHE_LINE_SIZE == 128
+#define RTE_CACHE_LINE_SIZE_LOG2 7
+#else
+#error "Unsupported cache line size"
+#endif
+
+#define RTE_CACHE_LINE_MIN_SIZE 64	/**< Minimum Cache line size. */
+
+/**
+ * Force alignment to cache line.
+ */
+#define __rte_cache_aligned __rte_aligned(RTE_CACHE_LINE_SIZE)
+
+/**
+ * Force minimum cache line alignment.
+ */
+#define __rte_cache_min_aligned __rte_aligned(RTE_CACHE_LINE_MIN_SIZE)
+
+/*********** PA/IOVA type definitions ********/
+
+typedef uint64_t phys_addr_t; /**< Physical address. */
+#define RTE_BAD_PHYS_ADDR ((phys_addr_t)-1)
+/**
+ * IO virtual address type.
+ * When the physical addressing mode (IOVA as PA) is in use,
+ * the translation from an IO virtual address (IOVA) to a physical address
+ * is a direct mapping, i.e. the same value.
+ * Otherwise, in virtual mode (IOVA as VA), an IOMMU may do the translation.
+ */
+typedef uint64_t rte_iova_t;
+#define RTE_BAD_IOVA ((rte_iova_t)-1)
+
 /**
  * Combines 32b inputs most significant set bits into the least
  * significant bits to construct a value with the same MSBs as x
diff --git a/lib/librte_eal/common/include/rte_memory.h b/lib/librte_eal/common/include/rte_memory.h
index 4717dcb43..38e00e382 100644
--- a/lib/librte_eal/common/include/rte_memory.h
+++ b/lib/librte_eal/common/include/rte_memory.h
@@ -39,44 +39,6 @@ enum rte_page_sizes {
 };
 
 #define SOCKET_ID_ANY -1                    /**< Any NUMA socket. */
-#define RTE_CACHE_LINE_MASK (RTE_CACHE_LINE_SIZE-1) /**< Cache line mask. */
-
-#define RTE_CACHE_LINE_ROUNDUP(size) \
-	(RTE_CACHE_LINE_SIZE * ((size + RTE_CACHE_LINE_SIZE - 1) / RTE_CACHE_LINE_SIZE))
-/**< Return the first cache-aligned value greater or equal to size. */
-
-/**< Cache line size in terms of log2 */
-#if RTE_CACHE_LINE_SIZE == 64
-#define RTE_CACHE_LINE_SIZE_LOG2 6
-#elif RTE_CACHE_LINE_SIZE == 128
-#define RTE_CACHE_LINE_SIZE_LOG2 7
-#else
-#error "Unsupported cache line size"
-#endif
-
-#define RTE_CACHE_LINE_MIN_SIZE 64	/**< Minimum Cache line size. */
-
-/**
- * Force alignment to cache line.
- */
-#define __rte_cache_aligned __rte_aligned(RTE_CACHE_LINE_SIZE)
-
-/**
- * Force minimum cache line alignment.
- */
-#define __rte_cache_min_aligned __rte_aligned(RTE_CACHE_LINE_MIN_SIZE)
-
-typedef uint64_t phys_addr_t; /**< Physical address. */
-#define RTE_BAD_PHYS_ADDR ((phys_addr_t)-1)
-/**
- * IO virtual address type.
- * When the physical addressing mode (IOVA as PA) is in use,
- * the translation from an IO virtual address (IOVA) to a physical address
- * is a direct mapping, i.e. the same value.
- * Otherwise, in virtual mode (IOVA as VA), an IOMMU may do the translation.
- */
-typedef uint64_t rte_iova_t;
-#define RTE_BAD_IOVA ((rte_iova_t)-1)
 
 /**
  * Physical memory segment descriptor.
-- 
2.17.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [dpdk-dev] [PATCH 2/3] mbuf: move mbuf definition into a separate file
  2019-08-16 12:53 [dpdk-dev] [PATCH 0/3] move mbuf definition into a separate file Konstantin Ananyev
  2019-08-16 12:53 ` [dpdk-dev] [PATCH 1/3] eal: move CACHE and IOVA related definitions Konstantin Ananyev
@ 2019-08-16 12:53 ` Konstantin Ananyev
  2019-08-16 18:51   ` Michel Machado
  2019-08-16 12:53 ` [dpdk-dev] [PATCH 3/3] examples/bpf: remove duplicate mbuf definition Konstantin Ananyev
  2 siblings, 1 reply; 7+ messages in thread
From: Konstantin Ananyev @ 2019-08-16 12:53 UTC (permalink / raw)
  To: dev
  Cc: michel, olivier.matz, anatoly.burakov, vipin.varghese,
	Konstantin Ananyev

Right now inclusion of rte_mbuf.h header can cause inclusion of
some arch/os specific headers.
That prevents it to be included directly by some
non-DPDK (but related) entities: KNI, BPF programs, etc.
To overcome that problem usually a separate definitions of rte_mbuf
structure is created within these entities.
That aproach has a lot of drawbacks: code duplication, error prone, etc.
This patch moves rte_mbuf structure definition (and some related macros)
into a separate file that can be included by both rte_mbuf.h and
other non-DPDK entities.

Note that it doesn't introduce any change for current DPDK code.

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
 lib/librte_mbuf/Makefile        |   5 +-
 lib/librte_mbuf/meson.build     |   3 +-
 lib/librte_mbuf/rte_mbuf.h      | 738 +----------------------------
 lib/librte_mbuf/rte_mbuf_core.h | 793 ++++++++++++++++++++++++++++++++
 4 files changed, 800 insertions(+), 739 deletions(-)
 create mode 100644 lib/librte_mbuf/rte_mbuf_core.h

diff --git a/lib/librte_mbuf/Makefile b/lib/librte_mbuf/Makefile
index c8f6d2689..f3b76ad23 100644
--- a/lib/librte_mbuf/Makefile
+++ b/lib/librte_mbuf/Makefile
@@ -19,6 +19,9 @@ LIBABIVER := 5
 SRCS-$(CONFIG_RTE_LIBRTE_MBUF) := rte_mbuf.c rte_mbuf_ptype.c rte_mbuf_pool_ops.c
 
 # install includes
-SYMLINK-$(CONFIG_RTE_LIBRTE_MBUF)-include := rte_mbuf.h rte_mbuf_ptype.h rte_mbuf_pool_ops.h
+SYMLINK-$(CONFIG_RTE_LIBRTE_MBUF)-include := rte_mbuf.h
+SYMLINK-$(CONFIG_RTE_LIBRTE_MBUF)-include += rte_mbuf_core.h
+SYMLINK-$(CONFIG_RTE_LIBRTE_MBUF)-include += rte_mbuf_ptype.h
+SYMLINK-$(CONFIG_RTE_LIBRTE_MBUF)-include += rte_mbuf_pool_ops.h
 
 include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_mbuf/meson.build b/lib/librte_mbuf/meson.build
index 6cc11ebb4..36bb6eb9d 100644
--- a/lib/librte_mbuf/meson.build
+++ b/lib/librte_mbuf/meson.build
@@ -3,7 +3,8 @@
 
 version = 5
 sources = files('rte_mbuf.c', 'rte_mbuf_ptype.c', 'rte_mbuf_pool_ops.c')
-headers = files('rte_mbuf.h', 'rte_mbuf_ptype.h', 'rte_mbuf_pool_ops.h')
+headers = files('rte_mbuf.h', 'rte_mbuf_core.h',
+		'rte_mbuf_ptype.h', 'rte_mbuf_pool_ops.h')
 deps += ['mempool']
 
 allow_experimental_apis = true
diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
index 98225ec80..528b2f121 100644
--- a/lib/librte_mbuf/rte_mbuf.h
+++ b/lib/librte_mbuf/rte_mbuf.h
@@ -42,367 +42,12 @@
 #include <rte_branch_prediction.h>
 #include <rte_byteorder.h>
 #include <rte_mbuf_ptype.h>
+#include <rte_mbuf_core.h>
 
 #ifdef __cplusplus
 extern "C" {
 #endif
 
-/*
- * Packet Offload Features Flags. It also carry packet type information.
- * Critical resources. Both rx/tx shared these bits. Be cautious on any change
- *
- * - RX flags start at bit position zero, and get added to the left of previous
- *   flags.
- * - The most-significant 3 bits are reserved for generic mbuf flags
- * - TX flags therefore start at bit position 60 (i.e. 63-3), and new flags get
- *   added to the right of the previously defined flags i.e. they should count
- *   downwards, not upwards.
- *
- * Keep these flags synchronized with rte_get_rx_ol_flag_name() and
- * rte_get_tx_ol_flag_name().
- */
-
-/**
- * The RX packet is a 802.1q VLAN packet, and the tci has been
- * saved in in mbuf->vlan_tci.
- * If the flag PKT_RX_VLAN_STRIPPED is also present, the VLAN
- * header has been stripped from mbuf data, else it is still
- * present.
- */
-#define PKT_RX_VLAN          (1ULL << 0)
-
-#define PKT_RX_RSS_HASH      (1ULL << 1)  /**< RX packet with RSS hash result. */
-#define PKT_RX_FDIR          (1ULL << 2)  /**< RX packet with FDIR match indicate. */
-
-/**
- * Deprecated.
- * Checking this flag alone is deprecated: check the 2 bits of
- * PKT_RX_L4_CKSUM_MASK.
- * This flag was set when the L4 checksum of a packet was detected as
- * wrong by the hardware.
- */
-#define PKT_RX_L4_CKSUM_BAD  (1ULL << 3)
-
-/**
- * Deprecated.
- * Checking this flag alone is deprecated: check the 2 bits of
- * PKT_RX_IP_CKSUM_MASK.
- * This flag was set when the IP checksum of a packet was detected as
- * wrong by the hardware.
- */
-#define PKT_RX_IP_CKSUM_BAD  (1ULL << 4)
-
-#define PKT_RX_EIP_CKSUM_BAD (1ULL << 5)  /**< External IP header checksum error. */
-
-/**
- * A vlan has been stripped by the hardware and its tci is saved in
- * mbuf->vlan_tci. This can only happen if vlan stripping is enabled
- * in the RX configuration of the PMD.
- * When PKT_RX_VLAN_STRIPPED is set, PKT_RX_VLAN must also be set.
- */
-#define PKT_RX_VLAN_STRIPPED (1ULL << 6)
-
-/**
- * Mask of bits used to determine the status of RX IP checksum.
- * - PKT_RX_IP_CKSUM_UNKNOWN: no information about the RX IP checksum
- * - PKT_RX_IP_CKSUM_BAD: the IP checksum in the packet is wrong
- * - PKT_RX_IP_CKSUM_GOOD: the IP checksum in the packet is valid
- * - PKT_RX_IP_CKSUM_NONE: the IP checksum is not correct in the packet
- *   data, but the integrity of the IP header is verified.
- */
-#define PKT_RX_IP_CKSUM_MASK ((1ULL << 4) | (1ULL << 7))
-
-#define PKT_RX_IP_CKSUM_UNKNOWN 0
-#define PKT_RX_IP_CKSUM_BAD     (1ULL << 4)
-#define PKT_RX_IP_CKSUM_GOOD    (1ULL << 7)
-#define PKT_RX_IP_CKSUM_NONE    ((1ULL << 4) | (1ULL << 7))
-
-/**
- * Mask of bits used to determine the status of RX L4 checksum.
- * - PKT_RX_L4_CKSUM_UNKNOWN: no information about the RX L4 checksum
- * - PKT_RX_L4_CKSUM_BAD: the L4 checksum in the packet is wrong
- * - PKT_RX_L4_CKSUM_GOOD: the L4 checksum in the packet is valid
- * - PKT_RX_L4_CKSUM_NONE: the L4 checksum is not correct in the packet
- *   data, but the integrity of the L4 data is verified.
- */
-#define PKT_RX_L4_CKSUM_MASK ((1ULL << 3) | (1ULL << 8))
-
-#define PKT_RX_L4_CKSUM_UNKNOWN 0
-#define PKT_RX_L4_CKSUM_BAD     (1ULL << 3)
-#define PKT_RX_L4_CKSUM_GOOD    (1ULL << 8)
-#define PKT_RX_L4_CKSUM_NONE    ((1ULL << 3) | (1ULL << 8))
-
-#define PKT_RX_IEEE1588_PTP  (1ULL << 9)  /**< RX IEEE1588 L2 Ethernet PT Packet. */
-#define PKT_RX_IEEE1588_TMST (1ULL << 10) /**< RX IEEE1588 L2/L4 timestamped packet.*/
-#define PKT_RX_FDIR_ID       (1ULL << 13) /**< FD id reported if FDIR match. */
-#define PKT_RX_FDIR_FLX      (1ULL << 14) /**< Flexible bytes reported if FDIR match. */
-
-/**
- * The 2 vlans have been stripped by the hardware and their tci are
- * saved in mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer).
- * This can only happen if vlan stripping is enabled in the RX
- * configuration of the PMD.
- * When PKT_RX_QINQ_STRIPPED is set, the flags (PKT_RX_VLAN |
- * PKT_RX_VLAN_STRIPPED | PKT_RX_QINQ) must also be set.
- */
-#define PKT_RX_QINQ_STRIPPED (1ULL << 15)
-
-/**
- * When packets are coalesced by a hardware or virtual driver, this flag
- * can be set in the RX mbuf, meaning that the m->tso_segsz field is
- * valid and is set to the segment size of original packets.
- */
-#define PKT_RX_LRO           (1ULL << 16)
-
-/**
- * Indicate that the timestamp field in the mbuf is valid.
- */
-#define PKT_RX_TIMESTAMP     (1ULL << 17)
-
-/**
- * Indicate that security offload processing was applied on the RX packet.
- */
-#define PKT_RX_SEC_OFFLOAD		(1ULL << 18)
-
-/**
- * Indicate that security offload processing failed on the RX packet.
- */
-#define PKT_RX_SEC_OFFLOAD_FAILED  	(1ULL << 19)
-
-/**
- * The RX packet is a double VLAN, and the outer tci has been
- * saved in in mbuf->vlan_tci_outer. If PKT_RX_QINQ set, PKT_RX_VLAN
- * also should be set and inner tci should be saved to mbuf->vlan_tci.
- * If the flag PKT_RX_QINQ_STRIPPED is also present, both VLANs
- * headers have been stripped from mbuf data, else they are still
- * present.
- */
-#define PKT_RX_QINQ          (1ULL << 20)
-
-/**
- * Mask of bits used to determine the status of outer RX L4 checksum.
- * - PKT_RX_OUTER_L4_CKSUM_UNKNOWN: no info about the outer RX L4 checksum
- * - PKT_RX_OUTER_L4_CKSUM_BAD: the outer L4 checksum in the packet is wrong
- * - PKT_RX_OUTER_L4_CKSUM_GOOD: the outer L4 checksum in the packet is valid
- * - PKT_RX_OUTER_L4_CKSUM_INVALID: invalid outer L4 checksum state.
- *
- * The detection of PKT_RX_OUTER_L4_CKSUM_GOOD shall be based on the given
- * HW capability, At minimum, the PMD should support
- * PKT_RX_OUTER_L4_CKSUM_UNKNOWN and PKT_RX_OUTER_L4_CKSUM_BAD states
- * if the DEV_RX_OFFLOAD_OUTER_UDP_CKSUM offload is available.
- */
-#define PKT_RX_OUTER_L4_CKSUM_MASK	((1ULL << 21) | (1ULL << 22))
-
-#define PKT_RX_OUTER_L4_CKSUM_UNKNOWN	0
-#define PKT_RX_OUTER_L4_CKSUM_BAD	(1ULL << 21)
-#define PKT_RX_OUTER_L4_CKSUM_GOOD	(1ULL << 22)
-#define PKT_RX_OUTER_L4_CKSUM_INVALID	((1ULL << 21) | (1ULL << 22))
-
-/* add new RX flags here */
-
-/* add new TX flags here */
-
-/**
- * Indicate that the metadata field in the mbuf is in use.
- */
-#define PKT_TX_METADATA	(1ULL << 40)
-
-/**
- * Outer UDP checksum offload flag. This flag is used for enabling
- * outer UDP checksum in PMD. To use outer UDP checksum, the user needs to
- * 1) Enable the following in mbuf,
- * a) Fill outer_l2_len and outer_l3_len in mbuf.
- * b) Set the PKT_TX_OUTER_UDP_CKSUM flag.
- * c) Set the PKT_TX_OUTER_IPV4 or PKT_TX_OUTER_IPV6 flag.
- * 2) Configure DEV_TX_OFFLOAD_OUTER_UDP_CKSUM offload flag.
- */
-#define PKT_TX_OUTER_UDP_CKSUM     (1ULL << 41)
-
-/**
- * UDP Fragmentation Offload flag. This flag is used for enabling UDP
- * fragmentation in SW or in HW. When use UFO, mbuf->tso_segsz is used
- * to store the MSS of UDP fragments.
- */
-#define PKT_TX_UDP_SEG	(1ULL << 42)
-
-/**
- * Request security offload processing on the TX packet.
- */
-#define PKT_TX_SEC_OFFLOAD 		(1ULL << 43)
-
-/**
- * Offload the MACsec. This flag must be set by the application to enable
- * this offload feature for a packet to be transmitted.
- */
-#define PKT_TX_MACSEC        (1ULL << 44)
-
-/**
- * Bits 45:48 used for the tunnel type.
- * The tunnel type must be specified for TSO or checksum on the inner part
- * of tunnel packets.
- * These flags can be used with PKT_TX_TCP_SEG for TSO, or PKT_TX_xxx_CKSUM.
- * The mbuf fields for inner and outer header lengths are required:
- * outer_l2_len, outer_l3_len, l2_len, l3_len, l4_len and tso_segsz for TSO.
- */
-#define PKT_TX_TUNNEL_VXLAN   (0x1ULL << 45)
-#define PKT_TX_TUNNEL_GRE     (0x2ULL << 45)
-#define PKT_TX_TUNNEL_IPIP    (0x3ULL << 45)
-#define PKT_TX_TUNNEL_GENEVE  (0x4ULL << 45)
-/** TX packet with MPLS-in-UDP RFC 7510 header. */
-#define PKT_TX_TUNNEL_MPLSINUDP (0x5ULL << 45)
-#define PKT_TX_TUNNEL_VXLAN_GPE (0x6ULL << 45)
-/**
- * Generic IP encapsulated tunnel type, used for TSO and checksum offload.
- * It can be used for tunnels which are not standards or listed above.
- * It is preferred to use specific tunnel flags like PKT_TX_TUNNEL_GRE
- * or PKT_TX_TUNNEL_IPIP if possible.
- * The ethdev must be configured with DEV_TX_OFFLOAD_IP_TNL_TSO.
- * Outer and inner checksums are done according to the existing flags like
- * PKT_TX_xxx_CKSUM.
- * Specific tunnel headers that contain payload length, sequence id
- * or checksum are not expected to be updated.
- */
-#define PKT_TX_TUNNEL_IP (0xDULL << 45)
-/**
- * Generic UDP encapsulated tunnel type, used for TSO and checksum offload.
- * UDP tunnel type implies outer IP layer.
- * It can be used for tunnels which are not standards or listed above.
- * It is preferred to use specific tunnel flags like PKT_TX_TUNNEL_VXLAN
- * if possible.
- * The ethdev must be configured with DEV_TX_OFFLOAD_UDP_TNL_TSO.
- * Outer and inner checksums are done according to the existing flags like
- * PKT_TX_xxx_CKSUM.
- * Specific tunnel headers that contain payload length, sequence id
- * or checksum are not expected to be updated.
- */
-#define PKT_TX_TUNNEL_UDP (0xEULL << 45)
-/* add new TX TUNNEL type here */
-#define PKT_TX_TUNNEL_MASK    (0xFULL << 45)
-
-/**
- * Double VLAN insertion (QinQ) request to driver, driver may offload the
- * insertion based on device capability.
- * mbuf 'vlan_tci' & 'vlan_tci_outer' must be valid when this flag is set.
- */
-#define PKT_TX_QINQ        (1ULL << 49)
-/* this old name is deprecated */
-#define PKT_TX_QINQ_PKT    PKT_TX_QINQ
-
-/**
- * TCP segmentation offload. To enable this offload feature for a
- * packet to be transmitted on hardware supporting TSO:
- *  - set the PKT_TX_TCP_SEG flag in mbuf->ol_flags (this flag implies
- *    PKT_TX_TCP_CKSUM)
- *  - set the flag PKT_TX_IPV4 or PKT_TX_IPV6
- *  - if it's IPv4, set the PKT_TX_IP_CKSUM flag
- *  - fill the mbuf offload information: l2_len, l3_len, l4_len, tso_segsz
- */
-#define PKT_TX_TCP_SEG       (1ULL << 50)
-
-#define PKT_TX_IEEE1588_TMST (1ULL << 51) /**< TX IEEE1588 packet to timestamp. */
-
-/**
- * Bits 52+53 used for L4 packet type with checksum enabled: 00: Reserved,
- * 01: TCP checksum, 10: SCTP checksum, 11: UDP checksum. To use hardware
- * L4 checksum offload, the user needs to:
- *  - fill l2_len and l3_len in mbuf
- *  - set the flags PKT_TX_TCP_CKSUM, PKT_TX_SCTP_CKSUM or PKT_TX_UDP_CKSUM
- *  - set the flag PKT_TX_IPV4 or PKT_TX_IPV6
- */
-#define PKT_TX_L4_NO_CKSUM   (0ULL << 52) /**< Disable L4 cksum of TX pkt. */
-#define PKT_TX_TCP_CKSUM     (1ULL << 52) /**< TCP cksum of TX pkt. computed by NIC. */
-#define PKT_TX_SCTP_CKSUM    (2ULL << 52) /**< SCTP cksum of TX pkt. computed by NIC. */
-#define PKT_TX_UDP_CKSUM     (3ULL << 52) /**< UDP cksum of TX pkt. computed by NIC. */
-#define PKT_TX_L4_MASK       (3ULL << 52) /**< Mask for L4 cksum offload request. */
-
-/**
- * Offload the IP checksum in the hardware. The flag PKT_TX_IPV4 should
- * also be set by the application, although a PMD will only check
- * PKT_TX_IP_CKSUM.
- *  - fill the mbuf offload information: l2_len, l3_len
- */
-#define PKT_TX_IP_CKSUM      (1ULL << 54)
-
-/**
- * Packet is IPv4. This flag must be set when using any offload feature
- * (TSO, L3 or L4 checksum) to tell the NIC that the packet is an IPv4
- * packet. If the packet is a tunneled packet, this flag is related to
- * the inner headers.
- */
-#define PKT_TX_IPV4          (1ULL << 55)
-
-/**
- * Packet is IPv6. This flag must be set when using an offload feature
- * (TSO or L4 checksum) to tell the NIC that the packet is an IPv6
- * packet. If the packet is a tunneled packet, this flag is related to
- * the inner headers.
- */
-#define PKT_TX_IPV6          (1ULL << 56)
-
-/**
- * VLAN tag insertion request to driver, driver may offload the insertion
- * based on the device capability.
- * mbuf 'vlan_tci' field must be valid when this flag is set.
- */
-#define PKT_TX_VLAN          (1ULL << 57)
-/* this old name is deprecated */
-#define PKT_TX_VLAN_PKT      PKT_TX_VLAN
-
-/**
- * Offload the IP checksum of an external header in the hardware. The
- * flag PKT_TX_OUTER_IPV4 should also be set by the application, although
- * a PMD will only check PKT_TX_OUTER_IP_CKSUM.
- *  - fill the mbuf offload information: outer_l2_len, outer_l3_len
- */
-#define PKT_TX_OUTER_IP_CKSUM   (1ULL << 58)
-
-/**
- * Packet outer header is IPv4. This flag must be set when using any
- * outer offload feature (L3 or L4 checksum) to tell the NIC that the
- * outer header of the tunneled packet is an IPv4 packet.
- */
-#define PKT_TX_OUTER_IPV4   (1ULL << 59)
-
-/**
- * Packet outer header is IPv6. This flag must be set when using any
- * outer offload feature (L4 checksum) to tell the NIC that the outer
- * header of the tunneled packet is an IPv6 packet.
- */
-#define PKT_TX_OUTER_IPV6    (1ULL << 60)
-
-/**
- * Bitmask of all supported packet Tx offload features flags,
- * which can be set for packet.
- */
-#define PKT_TX_OFFLOAD_MASK (    \
-		PKT_TX_OUTER_IPV6 |	 \
-		PKT_TX_OUTER_IPV4 |	 \
-		PKT_TX_OUTER_IP_CKSUM |  \
-		PKT_TX_VLAN_PKT |        \
-		PKT_TX_IPV6 |		 \
-		PKT_TX_IPV4 |		 \
-		PKT_TX_IP_CKSUM |        \
-		PKT_TX_L4_MASK |         \
-		PKT_TX_IEEE1588_TMST |	 \
-		PKT_TX_TCP_SEG |         \
-		PKT_TX_QINQ_PKT |        \
-		PKT_TX_TUNNEL_MASK |	 \
-		PKT_TX_MACSEC |		 \
-		PKT_TX_SEC_OFFLOAD |	 \
-		PKT_TX_UDP_SEG |	 \
-		PKT_TX_OUTER_UDP_CKSUM | \
-		PKT_TX_METADATA)
-
-/**
- * Mbuf having an external buffer attached. shinfo in mbuf must be filled.
- */
-#define EXT_ATTACHED_MBUF    (1ULL << 61)
-
-#define IND_ATTACHED_MBUF    (1ULL << 62) /**< Indirect attached mbuf */
-
-/** Alignment constraint of mbuf private area. */
-#define RTE_MBUF_PRIV_ALIGN 8
-
 /**
  * Get the name of a RX offload flag
  *
@@ -453,310 +98,6 @@ const char *rte_get_tx_ol_flag_name(uint64_t mask);
  */
 int rte_get_tx_ol_flag_list(uint64_t mask, char *buf, size_t buflen);
 
-/**
- * Some NICs need at least 2KB buffer to RX standard Ethernet frame without
- * splitting it into multiple segments.
- * So, for mbufs that planned to be involved into RX/TX, the recommended
- * minimal buffer length is 2KB + RTE_PKTMBUF_HEADROOM.
- */
-#define	RTE_MBUF_DEFAULT_DATAROOM	2048
-#define	RTE_MBUF_DEFAULT_BUF_SIZE	\
-	(RTE_MBUF_DEFAULT_DATAROOM + RTE_PKTMBUF_HEADROOM)
-
-/* define a set of marker types that can be used to refer to set points in the
- * mbuf */
-__extension__
-typedef void    *MARKER[0];   /**< generic marker for a point in a structure */
-__extension__
-typedef uint8_t  MARKER8[0];  /**< generic marker with 1B alignment */
-__extension__
-typedef uint64_t MARKER64[0]; /**< marker that allows us to overwrite 8 bytes
-                               * with a single assignment */
-
-struct rte_mbuf_sched {
-	uint32_t queue_id;   /**< Queue ID. */
-	uint8_t traffic_class;
-	/**< Traffic class ID. Traffic class 0
-	 * is the highest priority traffic class.
-	 */
-	uint8_t color;
-	/**< Color. @see enum rte_color.*/
-	uint16_t reserved;   /**< Reserved. */
-}; /**< Hierarchical scheduler */
-
-/**
- * enum for the tx_offload bit-fields lengths and offsets.
- * defines the layout of rte_mbuf tx_offload field.
- */
-enum {
-	RTE_MBUF_L2_LEN_BITS = 7,
-	RTE_MBUF_L3_LEN_BITS = 9,
-	RTE_MBUF_L4_LEN_BITS = 8,
-	RTE_MBUF_TSO_SEGSZ_BITS = 16,
-	RTE_MBUF_OUTL3_LEN_BITS = 9,
-	RTE_MBUF_OUTL2_LEN_BITS = 7,
-	RTE_MBUF_TXOFLD_UNUSED_BITS = sizeof(uint64_t) * CHAR_BIT -
-		RTE_MBUF_L2_LEN_BITS -
-		RTE_MBUF_L3_LEN_BITS -
-		RTE_MBUF_L4_LEN_BITS -
-		RTE_MBUF_TSO_SEGSZ_BITS -
-		RTE_MBUF_OUTL3_LEN_BITS -
-		RTE_MBUF_OUTL2_LEN_BITS,
-#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
-	RTE_MBUF_L2_LEN_OFS =
-		sizeof(uint64_t) * CHAR_BIT - RTE_MBUF_L2_LEN_BITS,
-	RTE_MBUF_L3_LEN_OFS = RTE_MBUF_L2_LEN_OFS - RTE_MBUF_L3_LEN_BITS,
-	RTE_MBUF_L4_LEN_OFS = RTE_MBUF_L3_LEN_OFS - RTE_MBUF_L4_LEN_BITS,
-	RTE_MBUF_TSO_SEGSZ_OFS = RTE_MBUF_L4_LEN_OFS - RTE_MBUF_TSO_SEGSZ_BITS,
-	RTE_MBUF_OUTL3_LEN_OFS =
-		RTE_MBUF_TSO_SEGSZ_OFS - RTE_MBUF_OUTL3_LEN_BITS,
-	RTE_MBUF_OUTL2_LEN_OFS =
-		RTE_MBUF_OUTL3_LEN_OFS - RTE_MBUF_OUTL2_LEN_BITS,
-	RTE_MBUF_TXOFLD_UNUSED_OFS =
-		RTE_MBUF_OUTL2_LEN_OFS - RTE_MBUF_TXOFLD_UNUSED_BITS,
-#else
-	RTE_MBUF_L2_LEN_OFS = 0,
-	RTE_MBUF_L3_LEN_OFS = RTE_MBUF_L2_LEN_OFS + RTE_MBUF_L2_LEN_BITS,
-	RTE_MBUF_L4_LEN_OFS = RTE_MBUF_L3_LEN_OFS + RTE_MBUF_L3_LEN_BITS,
-	RTE_MBUF_TSO_SEGSZ_OFS = RTE_MBUF_L4_LEN_OFS + RTE_MBUF_L4_LEN_BITS,
-	RTE_MBUF_OUTL3_LEN_OFS =
-		RTE_MBUF_TSO_SEGSZ_OFS + RTE_MBUF_TSO_SEGSZ_BITS,
-	RTE_MBUF_OUTL2_LEN_OFS =
-		RTE_MBUF_OUTL3_LEN_OFS + RTE_MBUF_OUTL3_LEN_BITS,
-	RTE_MBUF_TXOFLD_UNUSED_OFS =
-		RTE_MBUF_OUTL2_LEN_OFS + RTE_MBUF_OUTL2_LEN_BITS,
-#endif
-};
-
-/**
- * The generic rte_mbuf, containing a packet mbuf.
- */
-struct rte_mbuf {
-	MARKER cacheline0;
-
-	void *buf_addr;           /**< Virtual address of segment buffer. */
-	/**
-	 * Physical address of segment buffer.
-	 * Force alignment to 8-bytes, so as to ensure we have the exact
-	 * same mbuf cacheline0 layout for 32-bit and 64-bit. This makes
-	 * working on vector drivers easier.
-	 */
-	RTE_STD_C11
-	union {
-		rte_iova_t buf_iova;
-		rte_iova_t buf_physaddr; /**< deprecated */
-	} __rte_aligned(sizeof(rte_iova_t));
-
-	/* next 8 bytes are initialised on RX descriptor rearm */
-	MARKER64 rearm_data;
-	uint16_t data_off;
-
-	/**
-	 * Reference counter. Its size should at least equal to the size
-	 * of port field (16 bits), to support zero-copy broadcast.
-	 * It should only be accessed using the following functions:
-	 * rte_mbuf_refcnt_update(), rte_mbuf_refcnt_read(), and
-	 * rte_mbuf_refcnt_set(). The functionality of these functions (atomic,
-	 * or non-atomic) is controlled by the CONFIG_RTE_MBUF_REFCNT_ATOMIC
-	 * config option.
-	 */
-	RTE_STD_C11
-	union {
-		rte_atomic16_t refcnt_atomic; /**< Atomically accessed refcnt */
-		uint16_t refcnt;              /**< Non-atomically accessed refcnt */
-	};
-	uint16_t nb_segs;         /**< Number of segments. */
-
-	/** Input port (16 bits to support more than 256 virtual ports).
-	 * The event eth Tx adapter uses this field to specify the output port.
-	 */
-	uint16_t port;
-
-	uint64_t ol_flags;        /**< Offload features. */
-
-	/* remaining bytes are set on RX when pulling packet from descriptor */
-	MARKER rx_descriptor_fields1;
-
-	/*
-	 * The packet type, which is the combination of outer/inner L2, L3, L4
-	 * and tunnel types. The packet_type is about data really present in the
-	 * mbuf. Example: if vlan stripping is enabled, a received vlan packet
-	 * would have RTE_PTYPE_L2_ETHER and not RTE_PTYPE_L2_VLAN because the
-	 * vlan is stripped from the data.
-	 */
-	RTE_STD_C11
-	union {
-		uint32_t packet_type; /**< L2/L3/L4 and tunnel information. */
-		struct {
-			uint32_t l2_type:4; /**< (Outer) L2 type. */
-			uint32_t l3_type:4; /**< (Outer) L3 type. */
-			uint32_t l4_type:4; /**< (Outer) L4 type. */
-			uint32_t tun_type:4; /**< Tunnel type. */
-			RTE_STD_C11
-			union {
-				uint8_t inner_esp_next_proto;
-				/**< ESP next protocol type, valid if
-				 * RTE_PTYPE_TUNNEL_ESP tunnel type is set
-				 * on both Tx and Rx.
-				 */
-				__extension__
-				struct {
-					uint8_t inner_l2_type:4;
-					/**< Inner L2 type. */
-					uint8_t inner_l3_type:4;
-					/**< Inner L3 type. */
-				};
-			};
-			uint32_t inner_l4_type:4; /**< Inner L4 type. */
-		};
-	};
-
-	uint32_t pkt_len;         /**< Total pkt len: sum of all segments. */
-	uint16_t data_len;        /**< Amount of data in segment buffer. */
-	/** VLAN TCI (CPU order), valid if PKT_RX_VLAN is set. */
-	uint16_t vlan_tci;
-
-	RTE_STD_C11
-	union {
-		union {
-			uint32_t rss;     /**< RSS hash result if RSS enabled */
-			struct {
-				union {
-					struct {
-						uint16_t hash;
-						uint16_t id;
-					};
-					uint32_t lo;
-					/**< Second 4 flexible bytes */
-				};
-				uint32_t hi;
-				/**< First 4 flexible bytes or FD ID, dependent
-				 * on PKT_RX_FDIR_* flag in ol_flags.
-				 */
-			} fdir;	/**< Filter identifier if FDIR enabled */
-			struct rte_mbuf_sched sched;
-			/**< Hierarchical scheduler : 8 bytes */
-			struct {
-				uint32_t reserved1;
-				uint16_t reserved2;
-				uint16_t txq;
-				/**< The event eth Tx adapter uses this field
-				 * to store Tx queue id.
-				 * @see rte_event_eth_tx_adapter_txq_set()
-				 */
-			} txadapter; /**< Eventdev ethdev Tx adapter */
-			/**< User defined tags. See rte_distributor_process() */
-			uint32_t usr;
-		} hash;                   /**< hash information */
-		struct {
-			/**
-			 * Application specific metadata value
-			 * for egress flow rule match.
-			 * Valid if PKT_TX_METADATA is set.
-			 * Located here to allow conjunct use
-			 * with hash.sched.hi.
-			 */
-			uint32_t tx_metadata;
-			uint32_t reserved;
-		};
-	};
-
-	/** Outer VLAN TCI (CPU order), valid if PKT_RX_QINQ is set. */
-	uint16_t vlan_tci_outer;
-
-	uint16_t buf_len;         /**< Length of segment buffer. */
-
-	/** Valid if PKT_RX_TIMESTAMP is set. The unit and time reference
-	 * are not normalized but are always the same for a given port.
-	 * Some devices allow to query rte_eth_read_clock that will return the
-	 * current device timestamp.
-	 */
-	uint64_t timestamp;
-
-	/* second cache line - fields only used in slow path or on TX */
-	MARKER cacheline1 __rte_cache_min_aligned;
-
-	RTE_STD_C11
-	union {
-		void *userdata;   /**< Can be used for external metadata */
-		uint64_t udata64; /**< Allow 8-byte userdata on 32-bit */
-	};
-
-	struct rte_mempool *pool; /**< Pool from which mbuf was allocated. */
-	struct rte_mbuf *next;    /**< Next segment of scattered packet. */
-
-	/* fields to support TX offloads */
-	RTE_STD_C11
-	union {
-		uint64_t tx_offload;       /**< combined for easy fetch */
-		__extension__
-		struct {
-			uint64_t l2_len:RTE_MBUF_L2_LEN_BITS;
-			/**< L2 (MAC) Header Length for non-tunneling pkt.
-			 * Outer_L4_len + ... + Inner_L2_len for tunneling pkt.
-			 */
-			uint64_t l3_len:RTE_MBUF_L3_LEN_BITS;
-			/**< L3 (IP) Header Length. */
-			uint64_t l4_len:RTE_MBUF_L4_LEN_BITS;
-			/**< L4 (TCP/UDP) Header Length. */
-			uint64_t tso_segsz:RTE_MBUF_TSO_SEGSZ_BITS;
-			/**< TCP TSO segment size */
-
-			/*
-			 * Fields for Tx offloading of tunnels.
-			 * These are undefined for packets which don't request
-			 * any tunnel offloads (outer IP or UDP checksum,
-			 * tunnel TSO).
-			 *
-			 * PMDs should not use these fields unconditionally
-			 * when calculating offsets.
-			 *
-			 * Applications are expected to set appropriate tunnel
-			 * offload flags when they fill in these fields.
-			 */
-			uint64_t outer_l3_len:RTE_MBUF_OUTL3_LEN_BITS;
-			/**< Outer L3 (IP) Hdr Length. */
-			uint64_t outer_l2_len:RTE_MBUF_OUTL2_LEN_BITS;
-			/**< Outer L2 (MAC) Hdr Length. */
-
-			/* uint64_t unused:RTE_MBUF_TXOFLD_UNUSED_BITS; */
-		};
-	};
-
-	/** Size of the application private data. In case of an indirect
-	 * mbuf, it stores the direct mbuf private data size. */
-	uint16_t priv_size;
-
-	/** Timesync flags for use with IEEE1588. */
-	uint16_t timesync;
-
-	/** Sequence number. See also rte_reorder_insert(). */
-	uint32_t seqn;
-
-	/** Shared data for external buffer attached to mbuf. See
-	 * rte_pktmbuf_attach_extbuf().
-	 */
-	struct rte_mbuf_ext_shared_info *shinfo;
-
-} __rte_cache_aligned;
-
-/**
- * Function typedef of callback to free externally attached buffer.
- */
-typedef void (*rte_mbuf_extbuf_free_callback_t)(void *addr, void *opaque);
-
-/**
- * Shared data at the end of an external buffer.
- */
-struct rte_mbuf_ext_shared_info {
-	rte_mbuf_extbuf_free_callback_t free_cb; /**< Free callback function */
-	void *fcb_opaque;                        /**< Free callback argument */
-	rte_atomic16_t refcnt_atomic;        /**< Atomically accessed refcnt */
-};
-
-/**< Maximum number of nb_segs allowed. */
-#define RTE_MBUF_MAX_NB_SEGS	UINT16_MAX
-
 /**
  * Prefetch the first part of the mbuf
  *
@@ -953,31 +294,6 @@ rte_mbuf_to_priv(struct rte_mbuf *m)
 	return RTE_PTR_ADD(m, sizeof(struct rte_mbuf));
 }
 
-/**
- * Returns TRUE if given mbuf is cloned by mbuf indirection, or FALSE
- * otherwise.
- *
- * If a mbuf has its data in another mbuf and references it by mbuf
- * indirection, this mbuf can be defined as a cloned mbuf.
- */
-#define RTE_MBUF_CLONED(mb)     ((mb)->ol_flags & IND_ATTACHED_MBUF)
-
-/**
- * Returns TRUE if given mbuf has an external buffer, or FALSE otherwise.
- *
- * External buffer is a user-provided anonymous buffer.
- */
-#define RTE_MBUF_HAS_EXTBUF(mb) ((mb)->ol_flags & EXT_ATTACHED_MBUF)
-
-/**
- * Returns TRUE if given mbuf is direct, or FALSE otherwise.
- *
- * If a mbuf embeds its own data after the rte_mbuf structure, this mbuf
- * can be defined as a direct mbuf.
- */
-#define RTE_MBUF_DIRECT(mb) \
-	(!((mb)->ol_flags & (IND_ATTACHED_MBUF | EXT_ATTACHED_MBUF)))
-
 /**
  * Private data in case of pktmbuf pool.
  *
@@ -2026,62 +1342,10 @@ static inline struct rte_mbuf *rte_pktmbuf_lastseg(struct rte_mbuf *m)
 	return m;
 }
 
-/**
- * A macro that points to an offset into the data in the mbuf.
- *
- * The returned pointer is cast to type t. Before using this
- * function, the user must ensure that the first segment is large
- * enough to accommodate its data.
- *
- * @param m
- *   The packet mbuf.
- * @param o
- *   The offset into the mbuf data.
- * @param t
- *   The type to cast the result into.
- */
-#define rte_pktmbuf_mtod_offset(m, t, o)	\
-	((t)((char *)(m)->buf_addr + (m)->data_off + (o)))
-
-/**
- * A macro that points to the start of the data in the mbuf.
- *
- * The returned pointer is cast to type t. Before using this
- * function, the user must ensure that the first segment is large
- * enough to accommodate its data.
- *
- * @param m
- *   The packet mbuf.
- * @param t
- *   The type to cast the result into.
- */
-#define rte_pktmbuf_mtod(m, t) rte_pktmbuf_mtod_offset(m, t, 0)
-
-/**
- * A macro that returns the IO address that points to an offset of the
- * start of the data in the mbuf
- *
- * @param m
- *   The packet mbuf.
- * @param o
- *   The offset into the data to calculate address from.
- */
-#define rte_pktmbuf_iova_offset(m, o) \
-	(rte_iova_t)((m)->buf_iova + (m)->data_off + (o))
-
 /* deprecated */
 #define rte_pktmbuf_mtophys_offset(m, o) \
 	rte_pktmbuf_iova_offset(m, o)
 
-/**
- * A macro that returns the IO address that points to the start of the
- * data in the mbuf
- *
- * @param m
- *   The packet mbuf.
- */
-#define rte_pktmbuf_iova(m) rte_pktmbuf_iova_offset(m, 0)
-
 /* deprecated */
 #define rte_pktmbuf_mtophys(m) rte_pktmbuf_iova(m)
 
diff --git a/lib/librte_mbuf/rte_mbuf_core.h b/lib/librte_mbuf/rte_mbuf_core.h
new file mode 100644
index 000000000..f52272e55
--- /dev/null
+++ b/lib/librte_mbuf/rte_mbuf_core.h
@@ -0,0 +1,793 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation.
+ * Copyright 2014 6WIND S.A.
+ */
+
+#ifndef _RTE_MBUF_CORE_H_
+#define _RTE_MBUF_CORE_H_
+
+/**
+ * @file
+ * This file contains definion of RTE mbuf structure itself,
+ * packet offload flags and some related macros.
+ * For majority of DPDK entities, it is not recommended to include
+ * this file directly, use include <rte_mbuf.h> instead.
+ */
+
+#include <stdint.h>
+#include <rte_compat.h>
+#include <rte_common.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * Packet Offload Features Flags. It also carry packet type information.
+ * Critical resources. Both rx/tx shared these bits. Be cautious on any change
+ *
+ * - RX flags start at bit position zero, and get added to the left of previous
+ *   flags.
+ * - The most-significant 3 bits are reserved for generic mbuf flags
+ * - TX flags therefore start at bit position 60 (i.e. 63-3), and new flags get
+ *   added to the right of the previously defined flags i.e. they should count
+ *   downwards, not upwards.
+ *
+ * Keep these flags synchronized with rte_get_rx_ol_flag_name() and
+ * rte_get_tx_ol_flag_name().
+ */
+
+/**
+ * The RX packet is a 802.1q VLAN packet, and the tci has been
+ * saved in in mbuf->vlan_tci.
+ * If the flag PKT_RX_VLAN_STRIPPED is also present, the VLAN
+ * header has been stripped from mbuf data, else it is still
+ * present.
+ */
+#define PKT_RX_VLAN          (1ULL << 0)
+
+/** RX packet with RSS hash result. */
+#define PKT_RX_RSS_HASH      (1ULL << 1)
+
+ /** RX packet with FDIR match indicate. */
+#define PKT_RX_FDIR          (1ULL << 2)
+
+/**
+ * Deprecated.
+ * Checking this flag alone is deprecated: check the 2 bits of
+ * PKT_RX_L4_CKSUM_MASK.
+ * This flag was set when the L4 checksum of a packet was detected as
+ * wrong by the hardware.
+ */
+#define PKT_RX_L4_CKSUM_BAD  (1ULL << 3)
+
+/**
+ * Deprecated.
+ * Checking this flag alone is deprecated: check the 2 bits of
+ * PKT_RX_IP_CKSUM_MASK.
+ * This flag was set when the IP checksum of a packet was detected as
+ * wrong by the hardware.
+ */
+#define PKT_RX_IP_CKSUM_BAD  (1ULL << 4)
+
+ /** External IP header checksum error. */
+#define PKT_RX_EIP_CKSUM_BAD (1ULL << 5)
+
+/**
+ * A vlan has been stripped by the hardware and its tci is saved in
+ * mbuf->vlan_tci. This can only happen if vlan stripping is enabled
+ * in the RX configuration of the PMD.
+ * When PKT_RX_VLAN_STRIPPED is set, PKT_RX_VLAN must also be set.
+ */
+#define PKT_RX_VLAN_STRIPPED (1ULL << 6)
+
+/**
+ * Mask of bits used to determine the status of RX IP checksum.
+ * - PKT_RX_IP_CKSUM_UNKNOWN: no information about the RX IP checksum
+ * - PKT_RX_IP_CKSUM_BAD: the IP checksum in the packet is wrong
+ * - PKT_RX_IP_CKSUM_GOOD: the IP checksum in the packet is valid
+ * - PKT_RX_IP_CKSUM_NONE: the IP checksum is not correct in the packet
+ *   data, but the integrity of the IP header is verified.
+ */
+#define PKT_RX_IP_CKSUM_MASK ((1ULL << 4) | (1ULL << 7))
+
+#define PKT_RX_IP_CKSUM_UNKNOWN 0
+#define PKT_RX_IP_CKSUM_BAD     (1ULL << 4)
+#define PKT_RX_IP_CKSUM_GOOD    (1ULL << 7)
+#define PKT_RX_IP_CKSUM_NONE    ((1ULL << 4) | (1ULL << 7))
+
+/**
+ * Mask of bits used to determine the status of RX L4 checksum.
+ * - PKT_RX_L4_CKSUM_UNKNOWN: no information about the RX L4 checksum
+ * - PKT_RX_L4_CKSUM_BAD: the L4 checksum in the packet is wrong
+ * - PKT_RX_L4_CKSUM_GOOD: the L4 checksum in the packet is valid
+ * - PKT_RX_L4_CKSUM_NONE: the L4 checksum is not correct in the packet
+ *   data, but the integrity of the L4 data is verified.
+ */
+#define PKT_RX_L4_CKSUM_MASK ((1ULL << 3) | (1ULL << 8))
+
+#define PKT_RX_L4_CKSUM_UNKNOWN 0
+#define PKT_RX_L4_CKSUM_BAD     (1ULL << 3)
+#define PKT_RX_L4_CKSUM_GOOD    (1ULL << 8)
+#define PKT_RX_L4_CKSUM_NONE    ((1ULL << 3) | (1ULL << 8))
+
+/** RX IEEE1588 L2 Ethernet PT Packet. */
+#define PKT_RX_IEEE1588_PTP  (1ULL << 9)
+
+/** RX IEEE1588 L2/L4 timestamped packet.*/
+#define PKT_RX_IEEE1588_TMST (1ULL << 10)
+
+/** FD id reported if FDIR match. */
+#define PKT_RX_FDIR_ID       (1ULL << 13)
+
+/** Flexible bytes reported if FDIR match. */
+#define PKT_RX_FDIR_FLX      (1ULL << 14)
+
+/**
+ * The 2 vlans have been stripped by the hardware and their tci are
+ * saved in mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer).
+ * This can only happen if vlan stripping is enabled in the RX
+ * configuration of the PMD.
+ * When PKT_RX_QINQ_STRIPPED is set, the flags (PKT_RX_VLAN |
+ * PKT_RX_VLAN_STRIPPED | PKT_RX_QINQ) must also be set.
+ */
+#define PKT_RX_QINQ_STRIPPED (1ULL << 15)
+
+/**
+ * When packets are coalesced by a hardware or virtual driver, this flag
+ * can be set in the RX mbuf, meaning that the m->tso_segsz field is
+ * valid and is set to the segment size of original packets.
+ */
+#define PKT_RX_LRO           (1ULL << 16)
+
+/**
+ * Indicate that the timestamp field in the mbuf is valid.
+ */
+#define PKT_RX_TIMESTAMP     (1ULL << 17)
+
+/**
+ * Indicate that security offload processing was applied on the RX packet.
+ */
+#define PKT_RX_SEC_OFFLOAD	(1ULL << 18)
+
+/**
+ * Indicate that security offload processing failed on the RX packet.
+ */
+#define PKT_RX_SEC_OFFLOAD_FAILED	(1ULL << 19)
+
+/**
+ * The RX packet is a double VLAN, and the outer tci has been
+ * saved in in mbuf->vlan_tci_outer. If PKT_RX_QINQ set, PKT_RX_VLAN
+ * also should be set and inner tci should be saved to mbuf->vlan_tci.
+ * If the flag PKT_RX_QINQ_STRIPPED is also present, both VLANs
+ * headers have been stripped from mbuf data, else they are still
+ * present.
+ */
+#define PKT_RX_QINQ          (1ULL << 20)
+
+/**
+ * Mask of bits used to determine the status of outer RX L4 checksum.
+ * - PKT_RX_OUTER_L4_CKSUM_UNKNOWN: no info about the outer RX L4 checksum
+ * - PKT_RX_OUTER_L4_CKSUM_BAD: the outer L4 checksum in the packet is wrong
+ * - PKT_RX_OUTER_L4_CKSUM_GOOD: the outer L4 checksum in the packet is valid
+ * - PKT_RX_OUTER_L4_CKSUM_INVALID: invalid outer L4 checksum state.
+ *
+ * The detection of PKT_RX_OUTER_L4_CKSUM_GOOD shall be based on the given
+ * HW capability, At minimum, the PMD should support
+ * PKT_RX_OUTER_L4_CKSUM_UNKNOWN and PKT_RX_OUTER_L4_CKSUM_BAD states
+ * if the DEV_RX_OFFLOAD_OUTER_UDP_CKSUM offload is available.
+ */
+#define PKT_RX_OUTER_L4_CKSUM_MASK	((1ULL << 21) | (1ULL << 22))
+
+#define PKT_RX_OUTER_L4_CKSUM_UNKNOWN	0
+#define PKT_RX_OUTER_L4_CKSUM_BAD	(1ULL << 21)
+#define PKT_RX_OUTER_L4_CKSUM_GOOD	(1ULL << 22)
+#define PKT_RX_OUTER_L4_CKSUM_INVALID	((1ULL << 21) | (1ULL << 22))
+
+/* add new RX flags here */
+
+/* add new TX flags here */
+
+/**
+ * Indicate that the metadata field in the mbuf is in use.
+ */
+#define PKT_TX_METADATA	(1ULL << 40)
+
+/**
+ * Outer UDP checksum offload flag. This flag is used for enabling
+ * outer UDP checksum in PMD. To use outer UDP checksum, the user needs to
+ * 1) Enable the following in mbuf,
+ * a) Fill outer_l2_len and outer_l3_len in mbuf.
+ * b) Set the PKT_TX_OUTER_UDP_CKSUM flag.
+ * c) Set the PKT_TX_OUTER_IPV4 or PKT_TX_OUTER_IPV6 flag.
+ * 2) Configure DEV_TX_OFFLOAD_OUTER_UDP_CKSUM offload flag.
+ */
+#define PKT_TX_OUTER_UDP_CKSUM     (1ULL << 41)
+
+/**
+ * UDP Fragmentation Offload flag. This flag is used for enabling UDP
+ * fragmentation in SW or in HW. When use UFO, mbuf->tso_segsz is used
+ * to store the MSS of UDP fragments.
+ */
+#define PKT_TX_UDP_SEG	(1ULL << 42)
+
+/**
+ * Request security offload processing on the TX packet.
+ */
+#define PKT_TX_SEC_OFFLOAD	(1ULL << 43)
+
+/**
+ * Offload the MACsec. This flag must be set by the application to enable
+ * this offload feature for a packet to be transmitted.
+ */
+#define PKT_TX_MACSEC        (1ULL << 44)
+
+/**
+ * Bits 45:48 used for the tunnel type.
+ * The tunnel type must be specified for TSO or checksum on the inner part
+ * of tunnel packets.
+ * These flags can be used with PKT_TX_TCP_SEG for TSO, or PKT_TX_xxx_CKSUM.
+ * The mbuf fields for inner and outer header lengths are required:
+ * outer_l2_len, outer_l3_len, l2_len, l3_len, l4_len and tso_segsz for TSO.
+ */
+#define PKT_TX_TUNNEL_VXLAN   (0x1ULL << 45)
+#define PKT_TX_TUNNEL_GRE     (0x2ULL << 45)
+#define PKT_TX_TUNNEL_IPIP    (0x3ULL << 45)
+#define PKT_TX_TUNNEL_GENEVE  (0x4ULL << 45)
+/** TX packet with MPLS-in-UDP RFC 7510 header. */
+#define PKT_TX_TUNNEL_MPLSINUDP (0x5ULL << 45)
+#define PKT_TX_TUNNEL_VXLAN_GPE (0x6ULL << 45)
+/**
+ * Generic IP encapsulated tunnel type, used for TSO and checksum offload.
+ * It can be used for tunnels which are not standards or listed above.
+ * It is preferred to use specific tunnel flags like PKT_TX_TUNNEL_GRE
+ * or PKT_TX_TUNNEL_IPIP if possible.
+ * The ethdev must be configured with DEV_TX_OFFLOAD_IP_TNL_TSO.
+ * Outer and inner checksums are done according to the existing flags like
+ * PKT_TX_xxx_CKSUM.
+ * Specific tunnel headers that contain payload length, sequence id
+ * or checksum are not expected to be updated.
+ */
+#define PKT_TX_TUNNEL_IP (0xDULL << 45)
+/**
+ * Generic UDP encapsulated tunnel type, used for TSO and checksum offload.
+ * UDP tunnel type implies outer IP layer.
+ * It can be used for tunnels which are not standards or listed above.
+ * It is preferred to use specific tunnel flags like PKT_TX_TUNNEL_VXLAN
+ * if possible.
+ * The ethdev must be configured with DEV_TX_OFFLOAD_UDP_TNL_TSO.
+ * Outer and inner checksums are done according to the existing flags like
+ * PKT_TX_xxx_CKSUM.
+ * Specific tunnel headers that contain payload length, sequence id
+ * or checksum are not expected to be updated.
+ */
+#define PKT_TX_TUNNEL_UDP (0xEULL << 45)
+/* add new TX TUNNEL type here */
+#define PKT_TX_TUNNEL_MASK    (0xFULL << 45)
+
+/**
+ * Double VLAN insertion (QinQ) request to driver, driver may offload the
+ * insertion based on device capability.
+ * mbuf 'vlan_tci' & 'vlan_tci_outer' must be valid when this flag is set.
+ */
+#define PKT_TX_QINQ        (1ULL << 49)
+/* this old name is deprecated */
+#define PKT_TX_QINQ_PKT    PKT_TX_QINQ
+
+/**
+ * TCP segmentation offload. To enable this offload feature for a
+ * packet to be transmitted on hardware supporting TSO:
+ *  - set the PKT_TX_TCP_SEG flag in mbuf->ol_flags (this flag implies
+ *    PKT_TX_TCP_CKSUM)
+ *  - set the flag PKT_TX_IPV4 or PKT_TX_IPV6
+ *  - if it's IPv4, set the PKT_TX_IP_CKSUM flag
+ *  - fill the mbuf offload information: l2_len, l3_len, l4_len, tso_segsz
+ */
+#define PKT_TX_TCP_SEG       (1ULL << 50)
+
+/** TX IEEE1588 packet to timestamp. */
+#define PKT_TX_IEEE1588_TMST (1ULL << 51)
+
+/**
+ * Bits 52+53 used for L4 packet type with checksum enabled: 00: Reserved,
+ * 01: TCP checksum, 10: SCTP checksum, 11: UDP checksum. To use hardware
+ * L4 checksum offload, the user needs to:
+ *  - fill l2_len and l3_len in mbuf
+ *  - set the flags PKT_TX_TCP_CKSUM, PKT_TX_SCTP_CKSUM or PKT_TX_UDP_CKSUM
+ *  - set the flag PKT_TX_IPV4 or PKT_TX_IPV6
+ */
+#define PKT_TX_L4_NO_CKSUM   (0ULL << 52) /**< Disable L4 cksum of TX pkt. */
+
+/** TCP cksum of TX pkt. computed by NIC. */
+#define PKT_TX_TCP_CKSUM     (1ULL << 52)
+
+/** SCTP cksum of TX pkt. computed by NIC. */
+#define PKT_TX_SCTP_CKSUM    (2ULL << 52)
+
+/** UDP cksum of TX pkt. computed by NIC. */
+#define PKT_TX_UDP_CKSUM     (3ULL << 52)
+
+/** Mask for L4 cksum offload request. */
+#define PKT_TX_L4_MASK       (3ULL << 52)
+
+/**
+ * Offload the IP checksum in the hardware. The flag PKT_TX_IPV4 should
+ * also be set by the application, although a PMD will only check
+ * PKT_TX_IP_CKSUM.
+ *  - fill the mbuf offload information: l2_len, l3_len
+ */
+#define PKT_TX_IP_CKSUM      (1ULL << 54)
+
+/**
+ * Packet is IPv4. This flag must be set when using any offload feature
+ * (TSO, L3 or L4 checksum) to tell the NIC that the packet is an IPv4
+ * packet. If the packet is a tunneled packet, this flag is related to
+ * the inner headers.
+ */
+#define PKT_TX_IPV4          (1ULL << 55)
+
+/**
+ * Packet is IPv6. This flag must be set when using an offload feature
+ * (TSO or L4 checksum) to tell the NIC that the packet is an IPv6
+ * packet. If the packet is a tunneled packet, this flag is related to
+ * the inner headers.
+ */
+#define PKT_TX_IPV6          (1ULL << 56)
+
+/**
+ * VLAN tag insertion request to driver, driver may offload the insertion
+ * based on the device capability.
+ * mbuf 'vlan_tci' field must be valid when this flag is set.
+ */
+#define PKT_TX_VLAN          (1ULL << 57)
+/* this old name is deprecated */
+#define PKT_TX_VLAN_PKT      PKT_TX_VLAN
+
+/**
+ * Offload the IP checksum of an external header in the hardware. The
+ * flag PKT_TX_OUTER_IPV4 should also be set by the application, although
+ * a PMD will only check PKT_TX_OUTER_IP_CKSUM.
+ *  - fill the mbuf offload information: outer_l2_len, outer_l3_len
+ */
+#define PKT_TX_OUTER_IP_CKSUM   (1ULL << 58)
+
+/**
+ * Packet outer header is IPv4. This flag must be set when using any
+ * outer offload feature (L3 or L4 checksum) to tell the NIC that the
+ * outer header of the tunneled packet is an IPv4 packet.
+ */
+#define PKT_TX_OUTER_IPV4   (1ULL << 59)
+
+/**
+ * Packet outer header is IPv6. This flag must be set when using any
+ * outer offload feature (L4 checksum) to tell the NIC that the outer
+ * header of the tunneled packet is an IPv6 packet.
+ */
+#define PKT_TX_OUTER_IPV6    (1ULL << 60)
+
+/**
+ * Bitmask of all supported packet Tx offload features flags,
+ * which can be set for packet.
+ */
+#define PKT_TX_OFFLOAD_MASK (    \
+		PKT_TX_OUTER_IPV6 |	 \
+		PKT_TX_OUTER_IPV4 |	 \
+		PKT_TX_OUTER_IP_CKSUM |  \
+		PKT_TX_VLAN_PKT |        \
+		PKT_TX_IPV6 |		 \
+		PKT_TX_IPV4 |		 \
+		PKT_TX_IP_CKSUM |        \
+		PKT_TX_L4_MASK |         \
+		PKT_TX_IEEE1588_TMST |	 \
+		PKT_TX_TCP_SEG |         \
+		PKT_TX_QINQ_PKT |        \
+		PKT_TX_TUNNEL_MASK |	 \
+		PKT_TX_MACSEC |		 \
+		PKT_TX_SEC_OFFLOAD |	 \
+		PKT_TX_UDP_SEG |	 \
+		PKT_TX_OUTER_UDP_CKSUM | \
+		PKT_TX_METADATA)
+
+/**
+ * Mbuf having an external buffer attached. shinfo in mbuf must be filled.
+ */
+#define EXT_ATTACHED_MBUF    (1ULL << 61)
+
+#define IND_ATTACHED_MBUF    (1ULL << 62) /**< Indirect attached mbuf */
+
+/** Alignment constraint of mbuf private area. */
+#define RTE_MBUF_PRIV_ALIGN 8
+
+/**
+ * Some NICs need at least 2KB buffer to RX standard Ethernet frame without
+ * splitting it into multiple segments.
+ * So, for mbufs that planned to be involved into RX/TX, the recommended
+ * minimal buffer length is 2KB + RTE_PKTMBUF_HEADROOM.
+ */
+#define	RTE_MBUF_DEFAULT_DATAROOM	2048
+#define	RTE_MBUF_DEFAULT_BUF_SIZE	\
+	(RTE_MBUF_DEFAULT_DATAROOM + RTE_PKTMBUF_HEADROOM)
+
+/*
+ * define a set of marker types that can be used to refer to set points in the
+ * mbuf.
+ */
+__extension__
+typedef void    *MARKER[0];   /**< generic marker for a point in a structure */
+__extension__
+typedef uint8_t  MARKER8[0];  /**< generic marker with 1B alignment */
+
+ /** marker that allows us to overwrite 8 bytes with a single assignment */
+__extension__
+typedef uint64_t MARKER64[0];
+
+struct rte_mbuf_sched {
+	uint32_t queue_id;   /**< Queue ID. */
+	uint8_t traffic_class;
+	/**< Traffic class ID. Traffic class 0
+	 * is the highest priority traffic class.
+	 */
+	uint8_t color;
+	/**< Color. @see enum rte_color.*/
+	uint16_t reserved;   /**< Reserved. */
+}; /**< Hierarchical scheduler */
+
+/**
+ * enum for the tx_offload bit-fields lengths and offsets.
+ * defines the layout of rte_mbuf tx_offload field.
+ */
+enum {
+	RTE_MBUF_L2_LEN_BITS = 7,
+	RTE_MBUF_L3_LEN_BITS = 9,
+	RTE_MBUF_L4_LEN_BITS = 8,
+	RTE_MBUF_TSO_SEGSZ_BITS = 16,
+	RTE_MBUF_OUTL3_LEN_BITS = 9,
+	RTE_MBUF_OUTL2_LEN_BITS = 7,
+	RTE_MBUF_TXOFLD_UNUSED_BITS = sizeof(uint64_t) * CHAR_BIT -
+		RTE_MBUF_L2_LEN_BITS -
+		RTE_MBUF_L3_LEN_BITS -
+		RTE_MBUF_L4_LEN_BITS -
+		RTE_MBUF_TSO_SEGSZ_BITS -
+		RTE_MBUF_OUTL3_LEN_BITS -
+		RTE_MBUF_OUTL2_LEN_BITS,
+#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+	RTE_MBUF_L2_LEN_OFS =
+		sizeof(uint64_t) * CHAR_BIT - RTE_MBUF_L2_LEN_BITS,
+	RTE_MBUF_L3_LEN_OFS = RTE_MBUF_L2_LEN_OFS - RTE_MBUF_L3_LEN_BITS,
+	RTE_MBUF_L4_LEN_OFS = RTE_MBUF_L3_LEN_OFS - RTE_MBUF_L4_LEN_BITS,
+	RTE_MBUF_TSO_SEGSZ_OFS = RTE_MBUF_L4_LEN_OFS - RTE_MBUF_TSO_SEGSZ_BITS,
+	RTE_MBUF_OUTL3_LEN_OFS =
+		RTE_MBUF_TSO_SEGSZ_OFS - RTE_MBUF_OUTL3_LEN_BITS,
+	RTE_MBUF_OUTL2_LEN_OFS =
+		RTE_MBUF_OUTL3_LEN_OFS - RTE_MBUF_OUTL2_LEN_BITS,
+	RTE_MBUF_TXOFLD_UNUSED_OFS =
+		RTE_MBUF_OUTL2_LEN_OFS - RTE_MBUF_TXOFLD_UNUSED_BITS,
+#else
+	RTE_MBUF_L2_LEN_OFS = 0,
+	RTE_MBUF_L3_LEN_OFS = RTE_MBUF_L2_LEN_OFS + RTE_MBUF_L2_LEN_BITS,
+	RTE_MBUF_L4_LEN_OFS = RTE_MBUF_L3_LEN_OFS + RTE_MBUF_L3_LEN_BITS,
+	RTE_MBUF_TSO_SEGSZ_OFS = RTE_MBUF_L4_LEN_OFS + RTE_MBUF_L4_LEN_BITS,
+	RTE_MBUF_OUTL3_LEN_OFS =
+		RTE_MBUF_TSO_SEGSZ_OFS + RTE_MBUF_TSO_SEGSZ_BITS,
+	RTE_MBUF_OUTL2_LEN_OFS =
+		RTE_MBUF_OUTL3_LEN_OFS + RTE_MBUF_OUTL3_LEN_BITS,
+	RTE_MBUF_TXOFLD_UNUSED_OFS =
+		RTE_MBUF_OUTL2_LEN_OFS + RTE_MBUF_OUTL2_LEN_BITS,
+#endif
+};
+
+/**
+ * The generic rte_mbuf, containing a packet mbuf.
+ */
+struct rte_mbuf {
+	MARKER cacheline0;
+
+	void *buf_addr;           /**< Virtual address of segment buffer. */
+	/**
+	 * Physical address of segment buffer.
+	 * Force alignment to 8-bytes, so as to ensure we have the exact
+	 * same mbuf cacheline0 layout for 32-bit and 64-bit. This makes
+	 * working on vector drivers easier.
+	 */
+	RTE_STD_C11
+	union {
+		rte_iova_t buf_iova;
+		rte_iova_t buf_physaddr; /**< deprecated */
+	} __rte_aligned(sizeof(rte_iova_t));
+
+	/* next 8 bytes are initialised on RX descriptor rearm */
+	MARKER64 rearm_data;
+	uint16_t data_off;
+
+	/**
+	 * Reference counter. Its size should at least equal to the size
+	 * of port field (16 bits), to support zero-copy broadcast.
+	 * It should only be accessed using the following functions:
+	 * rte_mbuf_refcnt_update(), rte_mbuf_refcnt_read(), and
+	 * rte_mbuf_refcnt_set(). The functionality of these functions (atomic,
+	 * or non-atomic) is controlled by the CONFIG_RTE_MBUF_REFCNT_ATOMIC
+	 * config option.
+	 */
+	RTE_STD_C11
+	union {
+		rte_atomic16_t refcnt_atomic; /**< Atomically accessed refcnt */
+		/** Non-atomically accessed refcnt */
+		uint16_t refcnt;
+	};
+	uint16_t nb_segs;         /**< Number of segments. */
+
+	/** Input port (16 bits to support more than 256 virtual ports).
+	 * The event eth Tx adapter uses this field to specify the output port.
+	 */
+	uint16_t port;
+
+	uint64_t ol_flags;        /**< Offload features. */
+
+	/* remaining bytes are set on RX when pulling packet from descriptor */
+	MARKER rx_descriptor_fields1;
+
+	/*
+	 * The packet type, which is the combination of outer/inner L2, L3, L4
+	 * and tunnel types. The packet_type is about data really present in the
+	 * mbuf. Example: if vlan stripping is enabled, a received vlan packet
+	 * would have RTE_PTYPE_L2_ETHER and not RTE_PTYPE_L2_VLAN because the
+	 * vlan is stripped from the data.
+	 */
+	RTE_STD_C11
+	union {
+		uint32_t packet_type; /**< L2/L3/L4 and tunnel information. */
+		struct {
+			uint32_t l2_type:4; /**< (Outer) L2 type. */
+			uint32_t l3_type:4; /**< (Outer) L3 type. */
+			uint32_t l4_type:4; /**< (Outer) L4 type. */
+			uint32_t tun_type:4; /**< Tunnel type. */
+			RTE_STD_C11
+			union {
+				uint8_t inner_esp_next_proto;
+				/**< ESP next protocol type, valid if
+				 * RTE_PTYPE_TUNNEL_ESP tunnel type is set
+				 * on both Tx and Rx.
+				 */
+				__extension__
+				struct {
+					uint8_t inner_l2_type:4;
+					/**< Inner L2 type. */
+					uint8_t inner_l3_type:4;
+					/**< Inner L3 type. */
+				};
+			};
+			uint32_t inner_l4_type:4; /**< Inner L4 type. */
+		};
+	};
+
+	uint32_t pkt_len;         /**< Total pkt len: sum of all segments. */
+	uint16_t data_len;        /**< Amount of data in segment buffer. */
+	/** VLAN TCI (CPU order), valid if PKT_RX_VLAN is set. */
+	uint16_t vlan_tci;
+
+	RTE_STD_C11
+	union {
+		union {
+			uint32_t rss;     /**< RSS hash result if RSS enabled */
+			struct {
+				union {
+					struct {
+						uint16_t hash;
+						uint16_t id;
+					};
+					uint32_t lo;
+					/**< Second 4 flexible bytes */
+				};
+				uint32_t hi;
+				/**< First 4 flexible bytes or FD ID, dependent
+				 * on PKT_RX_FDIR_* flag in ol_flags.
+				 */
+			} fdir;	/**< Filter identifier if FDIR enabled */
+			struct rte_mbuf_sched sched;
+			/**< Hierarchical scheduler : 8 bytes */
+			struct {
+				uint32_t reserved1;
+				uint16_t reserved2;
+				uint16_t txq;
+				/**< The event eth Tx adapter uses this field
+				 * to store Tx queue id.
+				 * @see rte_event_eth_tx_adapter_txq_set()
+				 */
+			} txadapter; /**< Eventdev ethdev Tx adapter */
+			/**< User defined tags. See rte_distributor_process() */
+			uint32_t usr;
+		} hash;                   /**< hash information */
+		struct {
+			/**
+			 * Application specific metadata value
+			 * for egress flow rule match.
+			 * Valid if PKT_TX_METADATA is set.
+			 * Located here to allow conjunct use
+			 * with hash.sched.hi.
+			 */
+			uint32_t tx_metadata;
+			uint32_t reserved;
+		};
+	};
+
+	/** Outer VLAN TCI (CPU order), valid if PKT_RX_QINQ is set. */
+	uint16_t vlan_tci_outer;
+
+	uint16_t buf_len;         /**< Length of segment buffer. */
+
+	/** Valid if PKT_RX_TIMESTAMP is set. The unit and time reference
+	 * are not normalized but are always the same for a given port.
+	 * Some devices allow to query rte_eth_read_clock that will return the
+	 * current device timestamp.
+	 */
+	uint64_t timestamp;
+
+	/* second cache line - fields only used in slow path or on TX */
+	MARKER cacheline1 __rte_cache_min_aligned;
+
+	RTE_STD_C11
+	union {
+		void *userdata;   /**< Can be used for external metadata */
+		uint64_t udata64; /**< Allow 8-byte userdata on 32-bit */
+	};
+
+	struct rte_mempool *pool; /**< Pool from which mbuf was allocated. */
+	struct rte_mbuf *next;    /**< Next segment of scattered packet. */
+
+	/* fields to support TX offloads */
+	RTE_STD_C11
+	union {
+		uint64_t tx_offload;       /**< combined for easy fetch */
+		__extension__
+		struct {
+			uint64_t l2_len:RTE_MBUF_L2_LEN_BITS;
+			/**< L2 (MAC) Header Length for non-tunneling pkt.
+			 * Outer_L4_len + ... + Inner_L2_len for tunneling pkt.
+			 */
+			uint64_t l3_len:RTE_MBUF_L3_LEN_BITS;
+			/**< L3 (IP) Header Length. */
+			uint64_t l4_len:RTE_MBUF_L4_LEN_BITS;
+			/**< L4 (TCP/UDP) Header Length. */
+			uint64_t tso_segsz:RTE_MBUF_TSO_SEGSZ_BITS;
+			/**< TCP TSO segment size */
+
+			/*
+			 * Fields for Tx offloading of tunnels.
+			 * These are undefined for packets which don't request
+			 * any tunnel offloads (outer IP or UDP checksum,
+			 * tunnel TSO).
+			 *
+			 * PMDs should not use these fields unconditionally
+			 * when calculating offsets.
+			 *
+			 * Applications are expected to set appropriate tunnel
+			 * offload flags when they fill in these fields.
+			 */
+			uint64_t outer_l3_len:RTE_MBUF_OUTL3_LEN_BITS;
+			/**< Outer L3 (IP) Hdr Length. */
+			uint64_t outer_l2_len:RTE_MBUF_OUTL2_LEN_BITS;
+			/**< Outer L2 (MAC) Hdr Length. */
+
+			/* uint64_t unused:RTE_MBUF_TXOFLD_UNUSED_BITS; */
+		};
+	};
+
+	/** Size of the application private data. In case of an indirect
+	 * mbuf, it stores the direct mbuf private data size.
+	 */
+	uint16_t priv_size;
+
+	/** Timesync flags for use with IEEE1588. */
+	uint16_t timesync;
+
+	/** Sequence number. See also rte_reorder_insert(). */
+	uint32_t seqn;
+
+	/** Shared data for external buffer attached to mbuf. See
+	 * rte_pktmbuf_attach_extbuf().
+	 */
+	struct rte_mbuf_ext_shared_info *shinfo;
+
+} __rte_cache_aligned;
+
+/**
+ * Function typedef of callback to free externally attached buffer.
+ */
+typedef void (*rte_mbuf_extbuf_free_callback_t)(void *addr, void *opaque);
+
+/**
+ * Shared data at the end of an external buffer.
+ */
+struct rte_mbuf_ext_shared_info {
+	rte_mbuf_extbuf_free_callback_t free_cb; /**< Free callback function */
+	void *fcb_opaque;                        /**< Free callback argument */
+	rte_atomic16_t refcnt_atomic;        /**< Atomically accessed refcnt */
+};
+
+/**< Maximum number of nb_segs allowed. */
+#define RTE_MBUF_MAX_NB_SEGS	UINT16_MAX
+
+/**
+ * Returns TRUE if given mbuf is cloned by mbuf indirection, or FALSE
+ * otherwise.
+ *
+ * If a mbuf has its data in another mbuf and references it by mbuf
+ * indirection, this mbuf can be defined as a cloned mbuf.
+ */
+#define RTE_MBUF_CLONED(mb)     ((mb)->ol_flags & IND_ATTACHED_MBUF)
+
+/**
+ * Returns TRUE if given mbuf has an external buffer, or FALSE otherwise.
+ *
+ * External buffer is a user-provided anonymous buffer.
+ */
+#define RTE_MBUF_HAS_EXTBUF(mb) ((mb)->ol_flags & EXT_ATTACHED_MBUF)
+
+/**
+ * Returns TRUE if given mbuf is direct, or FALSE otherwise.
+ *
+ * If a mbuf embeds its own data after the rte_mbuf structure, this mbuf
+ * can be defined as a direct mbuf.
+ */
+#define RTE_MBUF_DIRECT(mb) \
+	(!((mb)->ol_flags & (IND_ATTACHED_MBUF | EXT_ATTACHED_MBUF)))
+
+#define MBUF_INVALID_PORT UINT16_MAX
+
+/**
+ * A macro that points to an offset into the data in the mbuf.
+ *
+ * The returned pointer is cast to type t. Before using this
+ * function, the user must ensure that the first segment is large
+ * enough to accommodate its data.
+ *
+ * @param m
+ *   The packet mbuf.
+ * @param o
+ *   The offset into the mbuf data.
+ * @param t
+ *   The type to cast the result into.
+ */
+#define rte_pktmbuf_mtod_offset(m, t, o)	\
+	((t)((char *)(m)->buf_addr + (m)->data_off + (o)))
+
+/**
+ * A macro that points to the start of the data in the mbuf.
+ *
+ * The returned pointer is cast to type t. Before using this
+ * function, the user must ensure that the first segment is large
+ * enough to accommodate its data.
+ *
+ * @param m
+ *   The packet mbuf.
+ * @param t
+ *   The type to cast the result into.
+ */
+#define rte_pktmbuf_mtod(m, t) rte_pktmbuf_mtod_offset(m, t, 0)
+
+/**
+ * A macro that returns the IO address that points to an offset of the
+ * start of the data in the mbuf
+ *
+ * @param m
+ *   The packet mbuf.
+ * @param o
+ *   The offset into the data to calculate address from.
+ */
+#define rte_pktmbuf_iova_offset(m, o) \
+	(rte_iova_t)((m)->buf_iova + (m)->data_off + (o))
+
+/**
+ * A macro that returns the IO address that points to the start of the
+ * data in the mbuf
+ *
+ * @param m
+ *   The packet mbuf.
+ */
+#define rte_pktmbuf_iova(m) rte_pktmbuf_iova_offset(m, 0)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_MBUF_CORE_H_ */
-- 
2.17.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [dpdk-dev] [PATCH 3/3] examples/bpf: remove duplicate mbuf definition
  2019-08-16 12:53 [dpdk-dev] [PATCH 0/3] move mbuf definition into a separate file Konstantin Ananyev
  2019-08-16 12:53 ` [dpdk-dev] [PATCH 1/3] eal: move CACHE and IOVA related definitions Konstantin Ananyev
  2019-08-16 12:53 ` [dpdk-dev] [PATCH 2/3] mbuf: move mbuf definition into a separate file Konstantin Ananyev
@ 2019-08-16 12:53 ` Konstantin Ananyev
  2019-08-16 18:44   ` Michel Machado
  2 siblings, 1 reply; 7+ messages in thread
From: Konstantin Ananyev @ 2019-08-16 12:53 UTC (permalink / raw)
  To: dev
  Cc: michel, olivier.matz, anatoly.burakov, vipin.varghese,
	Konstantin Ananyev

Get rid of duplicate definitions for rte_mbuf and related macros.
Include rte_mbuf_core.h instead.

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
 examples/bpf/mbuf.h | 605 --------------------------------------------
 examples/bpf/t2.c   |   5 +-
 examples/bpf/t3.c   |   3 +-
 3 files changed, 5 insertions(+), 608 deletions(-)
 delete mode 100644 examples/bpf/mbuf.h

diff --git a/examples/bpf/mbuf.h b/examples/bpf/mbuf.h
deleted file mode 100644
index e41c3d26e..000000000
--- a/examples/bpf/mbuf.h
+++ /dev/null
@@ -1,605 +0,0 @@
-/* SPDX-License-Identifier: BSD-3-Clause
- * Copyright(c) 2010-2014 Intel Corporation.
- * Copyright 2014 6WIND S.A.
- */
-
-/*
- * Snipper from dpdk.org rte_mbuf.h.
- * used to provide BPF programs information about rte_mbuf layout.
- */
-
-#ifndef _MBUF_H_
-#define _MBUF_H_
-
-#include <stdint.h>
-#include <rte_common.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
- * Packet Offload Features Flags. It also carry packet type information.
- * Critical resources. Both rx/tx shared these bits. Be cautious on any change
- *
- * - RX flags start at bit position zero, and get added to the left of previous
- *   flags.
- * - The most-significant 3 bits are reserved for generic mbuf flags
- * - TX flags therefore start at bit position 60 (i.e. 63-3), and new flags get
- *   added to the right of the previously defined flags i.e. they should count
- *   downwards, not upwards.
- *
- * Keep these flags synchronized with rte_get_rx_ol_flag_name() and
- * rte_get_tx_ol_flag_name().
- */
-
-/**
- * RX packet is a 802.1q VLAN packet. This flag was set by PMDs when
- * the packet is recognized as a VLAN, but the behavior between PMDs
- * was not the same. This flag is kept for some time to avoid breaking
- * applications and should be replaced by PKT_RX_VLAN_STRIPPED.
- */
-#define PKT_RX_VLAN_PKT      (1ULL << 0)
-
-#define PKT_RX_RSS_HASH      (1ULL << 1)
-/**< RX packet with RSS hash result. */
-#define PKT_RX_FDIR          (1ULL << 2)
-/**< RX packet with FDIR match indicate. */
-
-/**
- * Deprecated.
- * Checking this flag alone is deprecated: check the 2 bits of
- * PKT_RX_L4_CKSUM_MASK.
- * This flag was set when the L4 checksum of a packet was detected as
- * wrong by the hardware.
- */
-#define PKT_RX_L4_CKSUM_BAD  (1ULL << 3)
-
-/**
- * Deprecated.
- * Checking this flag alone is deprecated: check the 2 bits of
- * PKT_RX_IP_CKSUM_MASK.
- * This flag was set when the IP checksum of a packet was detected as
- * wrong by the hardware.
- */
-#define PKT_RX_IP_CKSUM_BAD  (1ULL << 4)
-
-#define PKT_RX_EIP_CKSUM_BAD (1ULL << 5)
-/**< External IP header checksum error. */
-
-/**
- * A vlan has been stripped by the hardware and its tci is saved in
- * mbuf->vlan_tci. This can only happen if vlan stripping is enabled
- * in the RX configuration of the PMD.
- */
-#define PKT_RX_VLAN_STRIPPED (1ULL << 6)
-
-/**
- * Mask of bits used to determine the status of RX IP checksum.
- * - PKT_RX_IP_CKSUM_UNKNOWN: no information about the RX IP checksum
- * - PKT_RX_IP_CKSUM_BAD: the IP checksum in the packet is wrong
- * - PKT_RX_IP_CKSUM_GOOD: the IP checksum in the packet is valid
- * - PKT_RX_IP_CKSUM_NONE: the IP checksum is not correct in the packet
- *   data, but the integrity of the IP header is verified.
- */
-#define PKT_RX_IP_CKSUM_MASK ((1ULL << 4) | (1ULL << 7))
-
-#define PKT_RX_IP_CKSUM_UNKNOWN 0
-#define PKT_RX_IP_CKSUM_BAD     (1ULL << 4)
-#define PKT_RX_IP_CKSUM_GOOD    (1ULL << 7)
-#define PKT_RX_IP_CKSUM_NONE    ((1ULL << 4) | (1ULL << 7))
-
-/**
- * Mask of bits used to determine the status of RX L4 checksum.
- * - PKT_RX_L4_CKSUM_UNKNOWN: no information about the RX L4 checksum
- * - PKT_RX_L4_CKSUM_BAD: the L4 checksum in the packet is wrong
- * - PKT_RX_L4_CKSUM_GOOD: the L4 checksum in the packet is valid
- * - PKT_RX_L4_CKSUM_NONE: the L4 checksum is not correct in the packet
- *   data, but the integrity of the L4 data is verified.
- */
-#define PKT_RX_L4_CKSUM_MASK ((1ULL << 3) | (1ULL << 8))
-
-#define PKT_RX_L4_CKSUM_UNKNOWN 0
-#define PKT_RX_L4_CKSUM_BAD     (1ULL << 3)
-#define PKT_RX_L4_CKSUM_GOOD    (1ULL << 8)
-#define PKT_RX_L4_CKSUM_NONE    ((1ULL << 3) | (1ULL << 8))
-
-#define PKT_RX_IEEE1588_PTP  (1ULL << 9)
-/**< RX IEEE1588 L2 Ethernet PT Packet. */
-#define PKT_RX_IEEE1588_TMST (1ULL << 10)
-/**< RX IEEE1588 L2/L4 timestamped packet.*/
-#define PKT_RX_FDIR_ID       (1ULL << 13)
-/**< FD id reported if FDIR match. */
-#define PKT_RX_FDIR_FLX      (1ULL << 14)
-/**< Flexible bytes reported if FDIR match. */
-
-/**
- * The 2 vlans have been stripped by the hardware and their tci are
- * saved in mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer).
- * This can only happen if vlan stripping is enabled in the RX
- * configuration of the PMD. If this flag is set, PKT_RX_VLAN_STRIPPED
- * must also be set.
- */
-#define PKT_RX_QINQ_STRIPPED (1ULL << 15)
-
-/**
- * Deprecated.
- * RX packet with double VLAN stripped.
- * This flag is replaced by PKT_RX_QINQ_STRIPPED.
- */
-#define PKT_RX_QINQ_PKT      PKT_RX_QINQ_STRIPPED
-
-/**
- * When packets are coalesced by a hardware or virtual driver, this flag
- * can be set in the RX mbuf, meaning that the m->tso_segsz field is
- * valid and is set to the segment size of original packets.
- */
-#define PKT_RX_LRO           (1ULL << 16)
-
-/**
- * Indicate that the timestamp field in the mbuf is valid.
- */
-#define PKT_RX_TIMESTAMP     (1ULL << 17)
-
-/* add new RX flags here */
-
-/* add new TX flags here */
-
-/**
- * Offload the MACsec. This flag must be set by the application to enable
- * this offload feature for a packet to be transmitted.
- */
-#define PKT_TX_MACSEC        (1ULL << 44)
-
-/**
- * Bits 45:48 used for the tunnel type.
- * When doing Tx offload like TSO or checksum, the HW needs to configure the
- * tunnel type into the HW descriptors.
- */
-#define PKT_TX_TUNNEL_VXLAN   (0x1ULL << 45)
-#define PKT_TX_TUNNEL_GRE     (0x2ULL << 45)
-#define PKT_TX_TUNNEL_IPIP    (0x3ULL << 45)
-#define PKT_TX_TUNNEL_GENEVE  (0x4ULL << 45)
-/**< TX packet with MPLS-in-UDP RFC 7510 header. */
-#define PKT_TX_TUNNEL_MPLSINUDP (0x5ULL << 45)
-/* add new TX TUNNEL type here */
-#define PKT_TX_TUNNEL_MASK    (0xFULL << 45)
-
-/**
- * Second VLAN insertion (QinQ) flag.
- */
-#define PKT_TX_QINQ_PKT    (1ULL << 49)
-/**< TX packet with double VLAN inserted. */
-
-/**
- * TCP segmentation offload. To enable this offload feature for a
- * packet to be transmitted on hardware supporting TSO:
- *  - set the PKT_TX_TCP_SEG flag in mbuf->ol_flags (this flag implies
- *    PKT_TX_TCP_CKSUM)
- *  - set the flag PKT_TX_IPV4 or PKT_TX_IPV6
- *  - if it's IPv4, set the PKT_TX_IP_CKSUM flag and write the IP checksum
- *    to 0 in the packet
- *  - fill the mbuf offload information: l2_len, l3_len, l4_len, tso_segsz
- *  - calculate the pseudo header checksum without taking ip_len in account,
- *    and set it in the TCP header. Refer to rte_ipv4_phdr_cksum() and
- *    rte_ipv6_phdr_cksum() that can be used as helpers.
- */
-#define PKT_TX_TCP_SEG       (1ULL << 50)
-
-#define PKT_TX_IEEE1588_TMST (1ULL << 51)
-/**< TX IEEE1588 packet to timestamp. */
-
-/**
- * Bits 52+53 used for L4 packet type with checksum enabled: 00: Reserved,
- * 01: TCP checksum, 10: SCTP checksum, 11: UDP checksum. To use hardware
- * L4 checksum offload, the user needs to:
- *  - fill l2_len and l3_len in mbuf
- *  - set the flags PKT_TX_TCP_CKSUM, PKT_TX_SCTP_CKSUM or PKT_TX_UDP_CKSUM
- *  - set the flag PKT_TX_IPV4 or PKT_TX_IPV6
- *  - calculate the pseudo header checksum and set it in the L4 header (only
- *    for TCP or UDP). See rte_ipv4_phdr_cksum() and rte_ipv6_phdr_cksum().
- *    For SCTP, set the crc field to 0.
- */
-#define PKT_TX_L4_NO_CKSUM   (0ULL << 52)
-/**< Disable L4 cksum of TX pkt. */
-#define PKT_TX_TCP_CKSUM     (1ULL << 52)
-/**< TCP cksum of TX pkt. computed by NIC. */
-#define PKT_TX_SCTP_CKSUM    (2ULL << 52)
-/**< SCTP cksum of TX pkt. computed by NIC. */
-#define PKT_TX_UDP_CKSUM     (3ULL << 52)
-/**< UDP cksum of TX pkt. computed by NIC. */
-#define PKT_TX_L4_MASK       (3ULL << 52)
-/**< Mask for L4 cksum offload request. */
-
-/**
- * Offload the IP checksum in the hardware. The flag PKT_TX_IPV4 should
- * also be set by the application, although a PMD will only check
- * PKT_TX_IP_CKSUM.
- *  - set the IP checksum field in the packet to 0
- *  - fill the mbuf offload information: l2_len, l3_len
- */
-#define PKT_TX_IP_CKSUM      (1ULL << 54)
-
-/**
- * Packet is IPv4. This flag must be set when using any offload feature
- * (TSO, L3 or L4 checksum) to tell the NIC that the packet is an IPv4
- * packet. If the packet is a tunneled packet, this flag is related to
- * the inner headers.
- */
-#define PKT_TX_IPV4          (1ULL << 55)
-
-/**
- * Packet is IPv6. This flag must be set when using an offload feature
- * (TSO or L4 checksum) to tell the NIC that the packet is an IPv6
- * packet. If the packet is a tunneled packet, this flag is related to
- * the inner headers.
- */
-#define PKT_TX_IPV6          (1ULL << 56)
-
-#define PKT_TX_VLAN_PKT      (1ULL << 57)
-/**< TX packet is a 802.1q VLAN packet. */
-
-/**
- * Offload the IP checksum of an external header in the hardware. The
- * flag PKT_TX_OUTER_IPV4 should also be set by the application, alto ugh
- * a PMD will only check PKT_TX_IP_CKSUM.  The IP checksum field in the
- * packet must be set to 0.
- *  - set the outer IP checksum field in the packet to 0
- *  - fill the mbuf offload information: outer_l2_len, outer_l3_len
- */
-#define PKT_TX_OUTER_IP_CKSUM   (1ULL << 58)
-
-/**
- * Packet outer header is IPv4. This flag must be set when using any
- * outer offload feature (L3 or L4 checksum) to tell the NIC that the
- * outer header of the tunneled packet is an IPv4 packet.
- */
-#define PKT_TX_OUTER_IPV4   (1ULL << 59)
-
-/**
- * Packet outer header is IPv6. This flag must be set when using any
- * outer offload feature (L4 checksum) to tell the NIC that the outer
- * header of the tunneled packet is an IPv6 packet.
- */
-#define PKT_TX_OUTER_IPV6    (1ULL << 60)
-
-/**
- * Bitmask of all supported packet Tx offload features flags,
- * which can be set for packet.
- */
-#define PKT_TX_OFFLOAD_MASK (    \
-		PKT_TX_IP_CKSUM |        \
-		PKT_TX_L4_MASK |         \
-		PKT_TX_OUTER_IP_CKSUM |  \
-		PKT_TX_TCP_SEG |         \
-		PKT_TX_IEEE1588_TMST |	 \
-		PKT_TX_QINQ_PKT |        \
-		PKT_TX_VLAN_PKT |        \
-		PKT_TX_TUNNEL_MASK |	 \
-		PKT_TX_MACSEC)
-
-#define __RESERVED           (1ULL << 61) /**< reserved for future mbuf use */
-
-#define IND_ATTACHED_MBUF    (1ULL << 62) /**< Indirect attached mbuf */
-
-/* Use final bit of flags to indicate a control mbuf */
-#define CTRL_MBUF_FLAG       (1ULL << 63) /**< Mbuf contains control data */
-
-/** Alignment constraint of mbuf private area. */
-#define RTE_MBUF_PRIV_ALIGN 8
-
-/**
- * Get the name of a RX offload flag
- *
- * @param mask
- *   The mask describing the flag.
- * @return
- *   The name of this flag, or NULL if it's not a valid RX flag.
- */
-const char *rte_get_rx_ol_flag_name(uint64_t mask);
-
-/**
- * Dump the list of RX offload flags in a buffer
- *
- * @param mask
- *   The mask describing the RX flags.
- * @param buf
- *   The output buffer.
- * @param buflen
- *   The length of the buffer.
- * @return
- *   0 on success, (-1) on error.
- */
-int rte_get_rx_ol_flag_list(uint64_t mask, char *buf, size_t buflen);
-
-/**
- * Get the name of a TX offload flag
- *
- * @param mask
- *   The mask describing the flag. Usually only one bit must be set.
- *   Several bits can be given if they belong to the same mask.
- *   Ex: PKT_TX_L4_MASK.
- * @return
- *   The name of this flag, or NULL if it's not a valid TX flag.
- */
-const char *rte_get_tx_ol_flag_name(uint64_t mask);
-
-/**
- * Dump the list of TX offload flags in a buffer
- *
- * @param mask
- *   The mask describing the TX flags.
- * @param buf
- *   The output buffer.
- * @param buflen
- *   The length of the buffer.
- * @return
- *   0 on success, (-1) on error.
- */
-int rte_get_tx_ol_flag_list(uint64_t mask, char *buf, size_t buflen);
-
-/**
- * Some NICs need at least 2KB buffer to RX standard Ethernet frame without
- * splitting it into multiple segments.
- * So, for mbufs that planned to be involved into RX/TX, the recommended
- * minimal buffer length is 2KB + RTE_PKTMBUF_HEADROOM.
- */
-#define	RTE_MBUF_DEFAULT_DATAROOM	2048
-#define	RTE_MBUF_DEFAULT_BUF_SIZE	\
-	(RTE_MBUF_DEFAULT_DATAROOM + RTE_PKTMBUF_HEADROOM)
-
-/* define a set of marker types that can be used to refer to set points in the
- * mbuf.
- */
-__extension__
-typedef void    *MARKER[0];   /**< generic marker for a point in a structure */
-__extension__
-typedef uint8_t  MARKER8[0];  /**< generic marker with 1B alignment */
-__extension__
-typedef uint64_t MARKER64[0];
-/**< marker that allows us to overwrite 8 bytes with a single assignment */
-
-typedef struct {
-	volatile int16_t cnt; /**< An internal counter value. */
-} rte_atomic16_t;
-
-#define RTE_CACHE_LINE_MIN_SIZE 64      /**< Minimum Cache line size. */
-
-/**
- * Force minimum cache line alignment.
- */
-#define __rte_cache_min_aligned __rte_aligned(RTE_CACHE_LINE_MIN_SIZE)
-
-/**
- * IO virtual address type.
- * When the physical addressing mode (IOVA as PA) is in use,
- * the translation from an IO virtual address (IOVA) to a physical address
- * is a direct mapping, i.e. the same value.
- * Otherwise, in virtual mode (IOVA as VA), an IOMMU may do the translation.
- */
-typedef uint64_t rte_iova_t;
-#define RTE_BAD_IOVA ((rte_iova_t)-1)
-
-/**
- * The generic rte_mbuf, containing a packet mbuf.
- */
-struct rte_mbuf {
-	MARKER cacheline0;
-
-	void *buf_addr;           /**< Virtual address of segment buffer. */
-	/**
-	 * Physical address of segment buffer.
-	 * Force alignment to 8-bytes, so as to ensure we have the exact
-	 * same mbuf cacheline0 layout for 32-bit and 64-bit. This makes
-	 * working on vector drivers easier.
-	 */
-	RTE_STD_C11
-	union {
-		rte_iova_t buf_iova;
-		rte_iova_t buf_physaddr; /**< deprecated */
-	} __rte_aligned(sizeof(rte_iova_t));
-
-	/* next 8 bytes are initialised on RX descriptor rearm */
-	MARKER64 rearm_data;
-	uint16_t data_off;
-
-	/**
-	 * Reference counter. Its size should at least equal to the size
-	 * of port field (16 bits), to support zero-copy broadcast.
-	 * It should only be accessed using the following functions:
-	 * rte_mbuf_refcnt_update(), rte_mbuf_refcnt_read(), and
-	 * rte_mbuf_refcnt_set(). The functionality of these functions (atomic,
-	 * or non-atomic) is controlled by the CONFIG_RTE_MBUF_REFCNT_ATOMIC
-	 * config option.
-	 */
-	RTE_STD_C11
-	union {
-		rte_atomic16_t refcnt_atomic; /**< Atomically accessed refcnt */
-		uint16_t refcnt;
-		/**< Non-atomically accessed refcnt */
-	};
-	uint16_t nb_segs;         /**< Number of segments. */
-
-	/** Input port (16 bits to support more than 256 virtual ports). */
-	uint16_t port;
-
-	uint64_t ol_flags;        /**< Offload features. */
-
-	/* remaining bytes are set on RX when pulling packet from descriptor */
-	MARKER rx_descriptor_fields1;
-
-	/*
-	 * The packet type, which is the combination of outer/inner L2, L3, L4
-	 * and tunnel types. The packet_type is about data really present in the
-	 * mbuf. Example: if vlan stripping is enabled, a received vlan packet
-	 * would have RTE_PTYPE_L2_ETHER and not RTE_PTYPE_L2_VLAN because the
-	 * vlan is stripped from the data.
-	 */
-	RTE_STD_C11
-	union {
-		uint32_t packet_type; /**< L2/L3/L4 and tunnel information. */
-		struct {
-			uint32_t l2_type:4; /**< (Outer) L2 type. */
-			uint32_t l3_type:4; /**< (Outer) L3 type. */
-			uint32_t l4_type:4; /**< (Outer) L4 type. */
-			uint32_t tun_type:4; /**< Tunnel type. */
-			uint32_t inner_l2_type:4; /**< Inner L2 type. */
-			uint32_t inner_l3_type:4; /**< Inner L3 type. */
-			uint32_t inner_l4_type:4; /**< Inner L4 type. */
-		};
-	};
-
-	uint32_t pkt_len;         /**< Total pkt len: sum of all segments. */
-	uint16_t data_len;        /**< Amount of data in segment buffer. */
-	/** VLAN TCI (CPU order), valid if PKT_RX_VLAN_STRIPPED is set. */
-	uint16_t vlan_tci;
-
-	union {
-		uint32_t rss;     /**< RSS hash result if RSS enabled */
-		struct {
-			RTE_STD_C11
-			union {
-				struct {
-					uint16_t hash;
-					uint16_t id;
-				};
-				uint32_t lo;
-				/**< Second 4 flexible bytes */
-			};
-			uint32_t hi;
-			/**< First 4 flexible bytes or FD ID, dependent on
-			 *   PKT_RX_FDIR_* flag in ol_flags.
-			 */
-		} fdir;           /**< Filter identifier if FDIR enabled */
-		struct {
-			uint32_t lo;
-			uint32_t hi;
-		} sched;          /**< Hierarchical scheduler */
-		uint32_t usr;
-		/**< User defined tags. See rte_distributor_process() */
-	} hash;                   /**< hash information */
-
-	/** Outer VLAN TCI (CPU order), valid if PKT_RX_QINQ_STRIPPED is set. */
-	uint16_t vlan_tci_outer;
-
-	uint16_t buf_len;         /**< Length of segment buffer. */
-
-	/** Valid if PKT_RX_TIMESTAMP is set. The unit and time reference
-	 * are not normalized but are always the same for a given port.
-	 */
-	uint64_t timestamp;
-
-	/* second cache line - fields only used in slow path or on TX */
-	MARKER cacheline1 __rte_cache_min_aligned;
-
-	RTE_STD_C11
-	union {
-		void *userdata;   /**< Can be used for external metadata */
-		uint64_t udata64; /**< Allow 8-byte userdata on 32-bit */
-	};
-
-	struct rte_mempool *pool; /**< Pool from which mbuf was allocated. */
-	struct rte_mbuf *next;    /**< Next segment of scattered packet. */
-
-	/* fields to support TX offloads */
-	RTE_STD_C11
-	union {
-		uint64_t tx_offload;       /**< combined for easy fetch */
-		__extension__
-		struct {
-			uint64_t l2_len:7;
-			/**< L2 (MAC) Header Length for non-tunneling pkt.
-			 * Outer_L4_len + ... + Inner_L2_len for tunneling pkt.
-			 */
-			uint64_t l3_len:9; /**< L3 (IP) Header Length. */
-			uint64_t l4_len:8; /**< L4 (TCP/UDP) Header Length. */
-			uint64_t tso_segsz:16; /**< TCP TSO segment size */
-
-			/* fields for TX offloading of tunnels */
-			uint64_t outer_l3_len:9;
-			/**< Outer L3 (IP) Hdr Length. */
-			uint64_t outer_l2_len:7;
-			/**< Outer L2 (MAC) Hdr Length. */
-
-			/* uint64_t unused:8; */
-		};
-	};
-
-	/** Size of the application private data. In case of an indirect
-	 * mbuf, it stores the direct mbuf private data size.
-	 */
-	uint16_t priv_size;
-
-	/** Timesync flags for use with IEEE1588. */
-	uint16_t timesync;
-
-	/** Sequence number. See also rte_reorder_insert(). */
-	uint32_t seqn;
-
-} __rte_cache_aligned;
-
-
-/**
- * Returns TRUE if given mbuf is cloned by mbuf indirection, or FALSE
- * otherwise.
- *
- * If a mbuf has its data in another mbuf and references it by mbuf
- * indirection, this mbuf can be defined as a cloned mbuf.
- */
-#define RTE_MBUF_CLONED(mb)     ((mb)->ol_flags & IND_ATTACHED_MBUF)
-
-/**
- * Returns TRUE if given mbuf is direct, or FALSE otherwise.
- *
- * If a mbuf embeds its own data after the rte_mbuf structure, this mbuf
- * can be defined as a direct mbuf.
- */
-#define RTE_MBUF_DIRECT(mb)     (!RTE_MBUF_CLONED(mb))
-
-/**
- * Private data in case of pktmbuf pool.
- *
- * A structure that contains some pktmbuf_pool-specific data that are
- * appended after the mempool structure (in private data).
- */
-struct rte_pktmbuf_pool_private {
-	uint16_t mbuf_data_room_size; /**< Size of data space in each mbuf. */
-	uint16_t mbuf_priv_size;      /**< Size of private area in each mbuf. */
-};
-
-/**
- * A macro that points to an offset into the data in the mbuf.
- *
- * The returned pointer is cast to type t. Before using this
- * function, the user must ensure that the first segment is large
- * enough to accommodate its data.
- *
- * @param m
- *   The packet mbuf.
- * @param o
- *   The offset into the mbuf data.
- * @param t
- *   The type to cast the result into.
- */
-#define rte_pktmbuf_mtod_offset(m, t, o)	\
-	((t)((char *)(m)->buf_addr + (m)->data_off + (o)))
-
-/**
- * A macro that points to the start of the data in the mbuf.
- *
- * The returned pointer is cast to type t. Before using this
- * function, the user must ensure that the first segment is large
- * enough to accommodate its data.
- *
- * @param m
- *   The packet mbuf.
- * @param t
- *   The type to cast the result into.
- */
-#define rte_pktmbuf_mtod(m, t) rte_pktmbuf_mtod_offset(m, t, 0)
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _MBUF_H_ */
diff --git a/examples/bpf/t2.c b/examples/bpf/t2.c
index 69d7a4fe1..3eee65450 100644
--- a/examples/bpf/t2.c
+++ b/examples/bpf/t2.c
@@ -16,7 +16,8 @@
 #include <stdint.h>
 #include <stddef.h>
 #include <rte_config.h>
-#include "mbuf.h"
+#include <generic/rte_atomic.h>
+#include <rte_mbuf_core.h>
 
 uint64_t
 entry(void *pkt)
@@ -25,7 +26,7 @@ entry(void *pkt)
 
 	mb = pkt;
 	mb->vlan_tci = 0;
-	mb->ol_flags &= ~(PKT_RX_VLAN_PKT | PKT_RX_VLAN_STRIPPED);
+	mb->ol_flags &= ~(PKT_RX_VLAN | PKT_RX_VLAN_STRIPPED);
 
 	return 1;
 }
diff --git a/examples/bpf/t3.c b/examples/bpf/t3.c
index 9ba34638a..58e0db1c2 100644
--- a/examples/bpf/t3.c
+++ b/examples/bpf/t3.c
@@ -22,7 +22,8 @@
 #include <stdio.h>
 #include <net/ethernet.h>
 #include <rte_config.h>
-#include "mbuf.h"
+#include <generic/rte_atomic.h>
+#include <rte_mbuf_core.h>
 #include <arpa/inet.h>
 
 extern void rte_pktmbuf_dump(FILE *, const struct rte_mbuf *, unsigned int);
-- 
2.17.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [dpdk-dev] [PATCH 3/3] examples/bpf: remove duplicate mbuf definition
  2019-08-16 12:53 ` [dpdk-dev] [PATCH 3/3] examples/bpf: remove duplicate mbuf definition Konstantin Ananyev
@ 2019-08-16 18:44   ` Michel Machado
  0 siblings, 0 replies; 7+ messages in thread
From: Michel Machado @ 2019-08-16 18:44 UTC (permalink / raw)
  To: Konstantin Ananyev, dev; +Cc: olivier.matz, anatoly.burakov, vipin.varghese

Since rte_mbuf_core.h requires generic/rte_atomic.h, shouldn't 
rte_mbuf_core.h include generic/rte_atomic.h instead of forcing users of 
rte_mbuf_core.h be aware of this dependency?

[ ]'s
Michel Machado

On 8/16/19 8:53 AM, Konstantin Ananyev wrote:
> Get rid of duplicate definitions for rte_mbuf and related macros.
> Include rte_mbuf_core.h instead.
> 
> Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
> ---
>   examples/bpf/mbuf.h | 605 --------------------------------------------
>   examples/bpf/t2.c   |   5 +-
>   examples/bpf/t3.c   |   3 +-
>   3 files changed, 5 insertions(+), 608 deletions(-)
>   delete mode 100644 examples/bpf/mbuf.h
> 
> diff --git a/examples/bpf/mbuf.h b/examples/bpf/mbuf.h
> deleted file mode 100644
> index e41c3d26e..000000000
> --- a/examples/bpf/mbuf.h
> +++ /dev/null
> @@ -1,605 +0,0 @@
> -/* SPDX-License-Identifier: BSD-3-Clause
> - * Copyright(c) 2010-2014 Intel Corporation.
> - * Copyright 2014 6WIND S.A.
> - */
> -
> -/*
> - * Snipper from dpdk.org rte_mbuf.h.
> - * used to provide BPF programs information about rte_mbuf layout.
> - */
> -
> -#ifndef _MBUF_H_
> -#define _MBUF_H_
> -
> -#include <stdint.h>
> -#include <rte_common.h>
> -
> -#ifdef __cplusplus
> -extern "C" {
> -#endif
> -
> -/*
> - * Packet Offload Features Flags. It also carry packet type information.
> - * Critical resources. Both rx/tx shared these bits. Be cautious on any change
> - *
> - * - RX flags start at bit position zero, and get added to the left of previous
> - *   flags.
> - * - The most-significant 3 bits are reserved for generic mbuf flags
> - * - TX flags therefore start at bit position 60 (i.e. 63-3), and new flags get
> - *   added to the right of the previously defined flags i.e. they should count
> - *   downwards, not upwards.
> - *
> - * Keep these flags synchronized with rte_get_rx_ol_flag_name() and
> - * rte_get_tx_ol_flag_name().
> - */
> -
> -/**
> - * RX packet is a 802.1q VLAN packet. This flag was set by PMDs when
> - * the packet is recognized as a VLAN, but the behavior between PMDs
> - * was not the same. This flag is kept for some time to avoid breaking
> - * applications and should be replaced by PKT_RX_VLAN_STRIPPED.
> - */
> -#define PKT_RX_VLAN_PKT      (1ULL << 0)
> -
> -#define PKT_RX_RSS_HASH      (1ULL << 1)
> -/**< RX packet with RSS hash result. */
> -#define PKT_RX_FDIR          (1ULL << 2)
> -/**< RX packet with FDIR match indicate. */
> -
> -/**
> - * Deprecated.
> - * Checking this flag alone is deprecated: check the 2 bits of
> - * PKT_RX_L4_CKSUM_MASK.
> - * This flag was set when the L4 checksum of a packet was detected as
> - * wrong by the hardware.
> - */
> -#define PKT_RX_L4_CKSUM_BAD  (1ULL << 3)
> -
> -/**
> - * Deprecated.
> - * Checking this flag alone is deprecated: check the 2 bits of
> - * PKT_RX_IP_CKSUM_MASK.
> - * This flag was set when the IP checksum of a packet was detected as
> - * wrong by the hardware.
> - */
> -#define PKT_RX_IP_CKSUM_BAD  (1ULL << 4)
> -
> -#define PKT_RX_EIP_CKSUM_BAD (1ULL << 5)
> -/**< External IP header checksum error. */
> -
> -/**
> - * A vlan has been stripped by the hardware and its tci is saved in
> - * mbuf->vlan_tci. This can only happen if vlan stripping is enabled
> - * in the RX configuration of the PMD.
> - */
> -#define PKT_RX_VLAN_STRIPPED (1ULL << 6)
> -
> -/**
> - * Mask of bits used to determine the status of RX IP checksum.
> - * - PKT_RX_IP_CKSUM_UNKNOWN: no information about the RX IP checksum
> - * - PKT_RX_IP_CKSUM_BAD: the IP checksum in the packet is wrong
> - * - PKT_RX_IP_CKSUM_GOOD: the IP checksum in the packet is valid
> - * - PKT_RX_IP_CKSUM_NONE: the IP checksum is not correct in the packet
> - *   data, but the integrity of the IP header is verified.
> - */
> -#define PKT_RX_IP_CKSUM_MASK ((1ULL << 4) | (1ULL << 7))
> -
> -#define PKT_RX_IP_CKSUM_UNKNOWN 0
> -#define PKT_RX_IP_CKSUM_BAD     (1ULL << 4)
> -#define PKT_RX_IP_CKSUM_GOOD    (1ULL << 7)
> -#define PKT_RX_IP_CKSUM_NONE    ((1ULL << 4) | (1ULL << 7))
> -
> -/**
> - * Mask of bits used to determine the status of RX L4 checksum.
> - * - PKT_RX_L4_CKSUM_UNKNOWN: no information about the RX L4 checksum
> - * - PKT_RX_L4_CKSUM_BAD: the L4 checksum in the packet is wrong
> - * - PKT_RX_L4_CKSUM_GOOD: the L4 checksum in the packet is valid
> - * - PKT_RX_L4_CKSUM_NONE: the L4 checksum is not correct in the packet
> - *   data, but the integrity of the L4 data is verified.
> - */
> -#define PKT_RX_L4_CKSUM_MASK ((1ULL << 3) | (1ULL << 8))
> -
> -#define PKT_RX_L4_CKSUM_UNKNOWN 0
> -#define PKT_RX_L4_CKSUM_BAD     (1ULL << 3)
> -#define PKT_RX_L4_CKSUM_GOOD    (1ULL << 8)
> -#define PKT_RX_L4_CKSUM_NONE    ((1ULL << 3) | (1ULL << 8))
> -
> -#define PKT_RX_IEEE1588_PTP  (1ULL << 9)
> -/**< RX IEEE1588 L2 Ethernet PT Packet. */
> -#define PKT_RX_IEEE1588_TMST (1ULL << 10)
> -/**< RX IEEE1588 L2/L4 timestamped packet.*/
> -#define PKT_RX_FDIR_ID       (1ULL << 13)
> -/**< FD id reported if FDIR match. */
> -#define PKT_RX_FDIR_FLX      (1ULL << 14)
> -/**< Flexible bytes reported if FDIR match. */
> -
> -/**
> - * The 2 vlans have been stripped by the hardware and their tci are
> - * saved in mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer).
> - * This can only happen if vlan stripping is enabled in the RX
> - * configuration of the PMD. If this flag is set, PKT_RX_VLAN_STRIPPED
> - * must also be set.
> - */
> -#define PKT_RX_QINQ_STRIPPED (1ULL << 15)
> -
> -/**
> - * Deprecated.
> - * RX packet with double VLAN stripped.
> - * This flag is replaced by PKT_RX_QINQ_STRIPPED.
> - */
> -#define PKT_RX_QINQ_PKT      PKT_RX_QINQ_STRIPPED
> -
> -/**
> - * When packets are coalesced by a hardware or virtual driver, this flag
> - * can be set in the RX mbuf, meaning that the m->tso_segsz field is
> - * valid and is set to the segment size of original packets.
> - */
> -#define PKT_RX_LRO           (1ULL << 16)
> -
> -/**
> - * Indicate that the timestamp field in the mbuf is valid.
> - */
> -#define PKT_RX_TIMESTAMP     (1ULL << 17)
> -
> -/* add new RX flags here */
> -
> -/* add new TX flags here */
> -
> -/**
> - * Offload the MACsec. This flag must be set by the application to enable
> - * this offload feature for a packet to be transmitted.
> - */
> -#define PKT_TX_MACSEC        (1ULL << 44)
> -
> -/**
> - * Bits 45:48 used for the tunnel type.
> - * When doing Tx offload like TSO or checksum, the HW needs to configure the
> - * tunnel type into the HW descriptors.
> - */
> -#define PKT_TX_TUNNEL_VXLAN   (0x1ULL << 45)
> -#define PKT_TX_TUNNEL_GRE     (0x2ULL << 45)
> -#define PKT_TX_TUNNEL_IPIP    (0x3ULL << 45)
> -#define PKT_TX_TUNNEL_GENEVE  (0x4ULL << 45)
> -/**< TX packet with MPLS-in-UDP RFC 7510 header. */
> -#define PKT_TX_TUNNEL_MPLSINUDP (0x5ULL << 45)
> -/* add new TX TUNNEL type here */
> -#define PKT_TX_TUNNEL_MASK    (0xFULL << 45)
> -
> -/**
> - * Second VLAN insertion (QinQ) flag.
> - */
> -#define PKT_TX_QINQ_PKT    (1ULL << 49)
> -/**< TX packet with double VLAN inserted. */
> -
> -/**
> - * TCP segmentation offload. To enable this offload feature for a
> - * packet to be transmitted on hardware supporting TSO:
> - *  - set the PKT_TX_TCP_SEG flag in mbuf->ol_flags (this flag implies
> - *    PKT_TX_TCP_CKSUM)
> - *  - set the flag PKT_TX_IPV4 or PKT_TX_IPV6
> - *  - if it's IPv4, set the PKT_TX_IP_CKSUM flag and write the IP checksum
> - *    to 0 in the packet
> - *  - fill the mbuf offload information: l2_len, l3_len, l4_len, tso_segsz
> - *  - calculate the pseudo header checksum without taking ip_len in account,
> - *    and set it in the TCP header. Refer to rte_ipv4_phdr_cksum() and
> - *    rte_ipv6_phdr_cksum() that can be used as helpers.
> - */
> -#define PKT_TX_TCP_SEG       (1ULL << 50)
> -
> -#define PKT_TX_IEEE1588_TMST (1ULL << 51)
> -/**< TX IEEE1588 packet to timestamp. */
> -
> -/**
> - * Bits 52+53 used for L4 packet type with checksum enabled: 00: Reserved,
> - * 01: TCP checksum, 10: SCTP checksum, 11: UDP checksum. To use hardware
> - * L4 checksum offload, the user needs to:
> - *  - fill l2_len and l3_len in mbuf
> - *  - set the flags PKT_TX_TCP_CKSUM, PKT_TX_SCTP_CKSUM or PKT_TX_UDP_CKSUM
> - *  - set the flag PKT_TX_IPV4 or PKT_TX_IPV6
> - *  - calculate the pseudo header checksum and set it in the L4 header (only
> - *    for TCP or UDP). See rte_ipv4_phdr_cksum() and rte_ipv6_phdr_cksum().
> - *    For SCTP, set the crc field to 0.
> - */
> -#define PKT_TX_L4_NO_CKSUM   (0ULL << 52)
> -/**< Disable L4 cksum of TX pkt. */
> -#define PKT_TX_TCP_CKSUM     (1ULL << 52)
> -/**< TCP cksum of TX pkt. computed by NIC. */
> -#define PKT_TX_SCTP_CKSUM    (2ULL << 52)
> -/**< SCTP cksum of TX pkt. computed by NIC. */
> -#define PKT_TX_UDP_CKSUM     (3ULL << 52)
> -/**< UDP cksum of TX pkt. computed by NIC. */
> -#define PKT_TX_L4_MASK       (3ULL << 52)
> -/**< Mask for L4 cksum offload request. */
> -
> -/**
> - * Offload the IP checksum in the hardware. The flag PKT_TX_IPV4 should
> - * also be set by the application, although a PMD will only check
> - * PKT_TX_IP_CKSUM.
> - *  - set the IP checksum field in the packet to 0
> - *  - fill the mbuf offload information: l2_len, l3_len
> - */
> -#define PKT_TX_IP_CKSUM      (1ULL << 54)
> -
> -/**
> - * Packet is IPv4. This flag must be set when using any offload feature
> - * (TSO, L3 or L4 checksum) to tell the NIC that the packet is an IPv4
> - * packet. If the packet is a tunneled packet, this flag is related to
> - * the inner headers.
> - */
> -#define PKT_TX_IPV4          (1ULL << 55)
> -
> -/**
> - * Packet is IPv6. This flag must be set when using an offload feature
> - * (TSO or L4 checksum) to tell the NIC that the packet is an IPv6
> - * packet. If the packet is a tunneled packet, this flag is related to
> - * the inner headers.
> - */
> -#define PKT_TX_IPV6          (1ULL << 56)
> -
> -#define PKT_TX_VLAN_PKT      (1ULL << 57)
> -/**< TX packet is a 802.1q VLAN packet. */
> -
> -/**
> - * Offload the IP checksum of an external header in the hardware. The
> - * flag PKT_TX_OUTER_IPV4 should also be set by the application, alto ugh
> - * a PMD will only check PKT_TX_IP_CKSUM.  The IP checksum field in the
> - * packet must be set to 0.
> - *  - set the outer IP checksum field in the packet to 0
> - *  - fill the mbuf offload information: outer_l2_len, outer_l3_len
> - */
> -#define PKT_TX_OUTER_IP_CKSUM   (1ULL << 58)
> -
> -/**
> - * Packet outer header is IPv4. This flag must be set when using any
> - * outer offload feature (L3 or L4 checksum) to tell the NIC that the
> - * outer header of the tunneled packet is an IPv4 packet.
> - */
> -#define PKT_TX_OUTER_IPV4   (1ULL << 59)
> -
> -/**
> - * Packet outer header is IPv6. This flag must be set when using any
> - * outer offload feature (L4 checksum) to tell the NIC that the outer
> - * header of the tunneled packet is an IPv6 packet.
> - */
> -#define PKT_TX_OUTER_IPV6    (1ULL << 60)
> -
> -/**
> - * Bitmask of all supported packet Tx offload features flags,
> - * which can be set for packet.
> - */
> -#define PKT_TX_OFFLOAD_MASK (    \
> -		PKT_TX_IP_CKSUM |        \
> -		PKT_TX_L4_MASK |         \
> -		PKT_TX_OUTER_IP_CKSUM |  \
> -		PKT_TX_TCP_SEG |         \
> -		PKT_TX_IEEE1588_TMST |	 \
> -		PKT_TX_QINQ_PKT |        \
> -		PKT_TX_VLAN_PKT |        \
> -		PKT_TX_TUNNEL_MASK |	 \
> -		PKT_TX_MACSEC)
> -
> -#define __RESERVED           (1ULL << 61) /**< reserved for future mbuf use */
> -
> -#define IND_ATTACHED_MBUF    (1ULL << 62) /**< Indirect attached mbuf */
> -
> -/* Use final bit of flags to indicate a control mbuf */
> -#define CTRL_MBUF_FLAG       (1ULL << 63) /**< Mbuf contains control data */
> -
> -/** Alignment constraint of mbuf private area. */
> -#define RTE_MBUF_PRIV_ALIGN 8
> -
> -/**
> - * Get the name of a RX offload flag
> - *
> - * @param mask
> - *   The mask describing the flag.
> - * @return
> - *   The name of this flag, or NULL if it's not a valid RX flag.
> - */
> -const char *rte_get_rx_ol_flag_name(uint64_t mask);
> -
> -/**
> - * Dump the list of RX offload flags in a buffer
> - *
> - * @param mask
> - *   The mask describing the RX flags.
> - * @param buf
> - *   The output buffer.
> - * @param buflen
> - *   The length of the buffer.
> - * @return
> - *   0 on success, (-1) on error.
> - */
> -int rte_get_rx_ol_flag_list(uint64_t mask, char *buf, size_t buflen);
> -
> -/**
> - * Get the name of a TX offload flag
> - *
> - * @param mask
> - *   The mask describing the flag. Usually only one bit must be set.
> - *   Several bits can be given if they belong to the same mask.
> - *   Ex: PKT_TX_L4_MASK.
> - * @return
> - *   The name of this flag, or NULL if it's not a valid TX flag.
> - */
> -const char *rte_get_tx_ol_flag_name(uint64_t mask);
> -
> -/**
> - * Dump the list of TX offload flags in a buffer
> - *
> - * @param mask
> - *   The mask describing the TX flags.
> - * @param buf
> - *   The output buffer.
> - * @param buflen
> - *   The length of the buffer.
> - * @return
> - *   0 on success, (-1) on error.
> - */
> -int rte_get_tx_ol_flag_list(uint64_t mask, char *buf, size_t buflen);
> -
> -/**
> - * Some NICs need at least 2KB buffer to RX standard Ethernet frame without
> - * splitting it into multiple segments.
> - * So, for mbufs that planned to be involved into RX/TX, the recommended
> - * minimal buffer length is 2KB + RTE_PKTMBUF_HEADROOM.
> - */
> -#define	RTE_MBUF_DEFAULT_DATAROOM	2048
> -#define	RTE_MBUF_DEFAULT_BUF_SIZE	\
> -	(RTE_MBUF_DEFAULT_DATAROOM + RTE_PKTMBUF_HEADROOM)
> -
> -/* define a set of marker types that can be used to refer to set points in the
> - * mbuf.
> - */
> -__extension__
> -typedef void    *MARKER[0];   /**< generic marker for a point in a structure */
> -__extension__
> -typedef uint8_t  MARKER8[0];  /**< generic marker with 1B alignment */
> -__extension__
> -typedef uint64_t MARKER64[0];
> -/**< marker that allows us to overwrite 8 bytes with a single assignment */
> -
> -typedef struct {
> -	volatile int16_t cnt; /**< An internal counter value. */
> -} rte_atomic16_t;
> -
> -#define RTE_CACHE_LINE_MIN_SIZE 64      /**< Minimum Cache line size. */
> -
> -/**
> - * Force minimum cache line alignment.
> - */
> -#define __rte_cache_min_aligned __rte_aligned(RTE_CACHE_LINE_MIN_SIZE)
> -
> -/**
> - * IO virtual address type.
> - * When the physical addressing mode (IOVA as PA) is in use,
> - * the translation from an IO virtual address (IOVA) to a physical address
> - * is a direct mapping, i.e. the same value.
> - * Otherwise, in virtual mode (IOVA as VA), an IOMMU may do the translation.
> - */
> -typedef uint64_t rte_iova_t;
> -#define RTE_BAD_IOVA ((rte_iova_t)-1)
> -
> -/**
> - * The generic rte_mbuf, containing a packet mbuf.
> - */
> -struct rte_mbuf {
> -	MARKER cacheline0;
> -
> -	void *buf_addr;           /**< Virtual address of segment buffer. */
> -	/**
> -	 * Physical address of segment buffer.
> -	 * Force alignment to 8-bytes, so as to ensure we have the exact
> -	 * same mbuf cacheline0 layout for 32-bit and 64-bit. This makes
> -	 * working on vector drivers easier.
> -	 */
> -	RTE_STD_C11
> -	union {
> -		rte_iova_t buf_iova;
> -		rte_iova_t buf_physaddr; /**< deprecated */
> -	} __rte_aligned(sizeof(rte_iova_t));
> -
> -	/* next 8 bytes are initialised on RX descriptor rearm */
> -	MARKER64 rearm_data;
> -	uint16_t data_off;
> -
> -	/**
> -	 * Reference counter. Its size should at least equal to the size
> -	 * of port field (16 bits), to support zero-copy broadcast.
> -	 * It should only be accessed using the following functions:
> -	 * rte_mbuf_refcnt_update(), rte_mbuf_refcnt_read(), and
> -	 * rte_mbuf_refcnt_set(). The functionality of these functions (atomic,
> -	 * or non-atomic) is controlled by the CONFIG_RTE_MBUF_REFCNT_ATOMIC
> -	 * config option.
> -	 */
> -	RTE_STD_C11
> -	union {
> -		rte_atomic16_t refcnt_atomic; /**< Atomically accessed refcnt */
> -		uint16_t refcnt;
> -		/**< Non-atomically accessed refcnt */
> -	};
> -	uint16_t nb_segs;         /**< Number of segments. */
> -
> -	/** Input port (16 bits to support more than 256 virtual ports). */
> -	uint16_t port;
> -
> -	uint64_t ol_flags;        /**< Offload features. */
> -
> -	/* remaining bytes are set on RX when pulling packet from descriptor */
> -	MARKER rx_descriptor_fields1;
> -
> -	/*
> -	 * The packet type, which is the combination of outer/inner L2, L3, L4
> -	 * and tunnel types. The packet_type is about data really present in the
> -	 * mbuf. Example: if vlan stripping is enabled, a received vlan packet
> -	 * would have RTE_PTYPE_L2_ETHER and not RTE_PTYPE_L2_VLAN because the
> -	 * vlan is stripped from the data.
> -	 */
> -	RTE_STD_C11
> -	union {
> -		uint32_t packet_type; /**< L2/L3/L4 and tunnel information. */
> -		struct {
> -			uint32_t l2_type:4; /**< (Outer) L2 type. */
> -			uint32_t l3_type:4; /**< (Outer) L3 type. */
> -			uint32_t l4_type:4; /**< (Outer) L4 type. */
> -			uint32_t tun_type:4; /**< Tunnel type. */
> -			uint32_t inner_l2_type:4; /**< Inner L2 type. */
> -			uint32_t inner_l3_type:4; /**< Inner L3 type. */
> -			uint32_t inner_l4_type:4; /**< Inner L4 type. */
> -		};
> -	};
> -
> -	uint32_t pkt_len;         /**< Total pkt len: sum of all segments. */
> -	uint16_t data_len;        /**< Amount of data in segment buffer. */
> -	/** VLAN TCI (CPU order), valid if PKT_RX_VLAN_STRIPPED is set. */
> -	uint16_t vlan_tci;
> -
> -	union {
> -		uint32_t rss;     /**< RSS hash result if RSS enabled */
> -		struct {
> -			RTE_STD_C11
> -			union {
> -				struct {
> -					uint16_t hash;
> -					uint16_t id;
> -				};
> -				uint32_t lo;
> -				/**< Second 4 flexible bytes */
> -			};
> -			uint32_t hi;
> -			/**< First 4 flexible bytes or FD ID, dependent on
> -			 *   PKT_RX_FDIR_* flag in ol_flags.
> -			 */
> -		} fdir;           /**< Filter identifier if FDIR enabled */
> -		struct {
> -			uint32_t lo;
> -			uint32_t hi;
> -		} sched;          /**< Hierarchical scheduler */
> -		uint32_t usr;
> -		/**< User defined tags. See rte_distributor_process() */
> -	} hash;                   /**< hash information */
> -
> -	/** Outer VLAN TCI (CPU order), valid if PKT_RX_QINQ_STRIPPED is set. */
> -	uint16_t vlan_tci_outer;
> -
> -	uint16_t buf_len;         /**< Length of segment buffer. */
> -
> -	/** Valid if PKT_RX_TIMESTAMP is set. The unit and time reference
> -	 * are not normalized but are always the same for a given port.
> -	 */
> -	uint64_t timestamp;
> -
> -	/* second cache line - fields only used in slow path or on TX */
> -	MARKER cacheline1 __rte_cache_min_aligned;
> -
> -	RTE_STD_C11
> -	union {
> -		void *userdata;   /**< Can be used for external metadata */
> -		uint64_t udata64; /**< Allow 8-byte userdata on 32-bit */
> -	};
> -
> -	struct rte_mempool *pool; /**< Pool from which mbuf was allocated. */
> -	struct rte_mbuf *next;    /**< Next segment of scattered packet. */
> -
> -	/* fields to support TX offloads */
> -	RTE_STD_C11
> -	union {
> -		uint64_t tx_offload;       /**< combined for easy fetch */
> -		__extension__
> -		struct {
> -			uint64_t l2_len:7;
> -			/**< L2 (MAC) Header Length for non-tunneling pkt.
> -			 * Outer_L4_len + ... + Inner_L2_len for tunneling pkt.
> -			 */
> -			uint64_t l3_len:9; /**< L3 (IP) Header Length. */
> -			uint64_t l4_len:8; /**< L4 (TCP/UDP) Header Length. */
> -			uint64_t tso_segsz:16; /**< TCP TSO segment size */
> -
> -			/* fields for TX offloading of tunnels */
> -			uint64_t outer_l3_len:9;
> -			/**< Outer L3 (IP) Hdr Length. */
> -			uint64_t outer_l2_len:7;
> -			/**< Outer L2 (MAC) Hdr Length. */
> -
> -			/* uint64_t unused:8; */
> -		};
> -	};
> -
> -	/** Size of the application private data. In case of an indirect
> -	 * mbuf, it stores the direct mbuf private data size.
> -	 */
> -	uint16_t priv_size;
> -
> -	/** Timesync flags for use with IEEE1588. */
> -	uint16_t timesync;
> -
> -	/** Sequence number. See also rte_reorder_insert(). */
> -	uint32_t seqn;
> -
> -} __rte_cache_aligned;
> -
> -
> -/**
> - * Returns TRUE if given mbuf is cloned by mbuf indirection, or FALSE
> - * otherwise.
> - *
> - * If a mbuf has its data in another mbuf and references it by mbuf
> - * indirection, this mbuf can be defined as a cloned mbuf.
> - */
> -#define RTE_MBUF_CLONED(mb)     ((mb)->ol_flags & IND_ATTACHED_MBUF)
> -
> -/**
> - * Returns TRUE if given mbuf is direct, or FALSE otherwise.
> - *
> - * If a mbuf embeds its own data after the rte_mbuf structure, this mbuf
> - * can be defined as a direct mbuf.
> - */
> -#define RTE_MBUF_DIRECT(mb)     (!RTE_MBUF_CLONED(mb))
> -
> -/**
> - * Private data in case of pktmbuf pool.
> - *
> - * A structure that contains some pktmbuf_pool-specific data that are
> - * appended after the mempool structure (in private data).
> - */
> -struct rte_pktmbuf_pool_private {
> -	uint16_t mbuf_data_room_size; /**< Size of data space in each mbuf. */
> -	uint16_t mbuf_priv_size;      /**< Size of private area in each mbuf. */
> -};
> -
> -/**
> - * A macro that points to an offset into the data in the mbuf.
> - *
> - * The returned pointer is cast to type t. Before using this
> - * function, the user must ensure that the first segment is large
> - * enough to accommodate its data.
> - *
> - * @param m
> - *   The packet mbuf.
> - * @param o
> - *   The offset into the mbuf data.
> - * @param t
> - *   The type to cast the result into.
> - */
> -#define rte_pktmbuf_mtod_offset(m, t, o)	\
> -	((t)((char *)(m)->buf_addr + (m)->data_off + (o)))
> -
> -/**
> - * A macro that points to the start of the data in the mbuf.
> - *
> - * The returned pointer is cast to type t. Before using this
> - * function, the user must ensure that the first segment is large
> - * enough to accommodate its data.
> - *
> - * @param m
> - *   The packet mbuf.
> - * @param t
> - *   The type to cast the result into.
> - */
> -#define rte_pktmbuf_mtod(m, t) rte_pktmbuf_mtod_offset(m, t, 0)
> -
> -#ifdef __cplusplus
> -}
> -#endif
> -
> -#endif /* _MBUF_H_ */
> diff --git a/examples/bpf/t2.c b/examples/bpf/t2.c
> index 69d7a4fe1..3eee65450 100644
> --- a/examples/bpf/t2.c
> +++ b/examples/bpf/t2.c
> @@ -16,7 +16,8 @@
>   #include <stdint.h>
>   #include <stddef.h>
>   #include <rte_config.h>
> -#include "mbuf.h"
> +#include <generic/rte_atomic.h>
> +#include <rte_mbuf_core.h>
>   
>   uint64_t
>   entry(void *pkt)
> @@ -25,7 +26,7 @@ entry(void *pkt)
>   
>   	mb = pkt;
>   	mb->vlan_tci = 0;
> -	mb->ol_flags &= ~(PKT_RX_VLAN_PKT | PKT_RX_VLAN_STRIPPED);
> +	mb->ol_flags &= ~(PKT_RX_VLAN | PKT_RX_VLAN_STRIPPED);
>   
>   	return 1;
>   }
> diff --git a/examples/bpf/t3.c b/examples/bpf/t3.c
> index 9ba34638a..58e0db1c2 100644
> --- a/examples/bpf/t3.c
> +++ b/examples/bpf/t3.c
> @@ -22,7 +22,8 @@
>   #include <stdio.h>
>   #include <net/ethernet.h>
>   #include <rte_config.h>
> -#include "mbuf.h"
> +#include <generic/rte_atomic.h>
> +#include <rte_mbuf_core.h>
>   #include <arpa/inet.h>
>   
>   extern void rte_pktmbuf_dump(FILE *, const struct rte_mbuf *, unsigned int);
> 

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [dpdk-dev] [PATCH 1/3] eal: move CACHE and IOVA related definitions
  2019-08-16 12:53 ` [dpdk-dev] [PATCH 1/3] eal: move CACHE and IOVA related definitions Konstantin Ananyev
@ 2019-08-16 18:50   ` Michel Machado
  0 siblings, 0 replies; 7+ messages in thread
From: Michel Machado @ 2019-08-16 18:50 UTC (permalink / raw)
  To: Konstantin Ananyev, dev; +Cc: olivier.matz, anatoly.burakov, vipin.varghese

Acked-by: Michel Machado <michel@digirati.com.br>

[ ]'s
Michel Machado

On 8/16/19 8:53 AM, Konstantin Ananyev wrote:
> Right now RTE_CACHE_ and IOVA definitions are located inside rte_memory.h
> That might cause an unwanted inclusions of arch/os specific header files.
> See [1] for particular problem example.
> Probably the simplest way to deal with such problems -
> move these definitions into rte_commmon.h
> 
> Note that this move doesn't introduce any change in functionality.
> 
> [1] https://bugs.dpdk.org/show_bug.cgi?id=321
> 
> Suggested-by: Vipin Varghese <vipin.varghese@intel.com>
> Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
> ---
>   lib/librte_eal/common/include/rte_common.h | 44 ++++++++++++++++++++++
>   lib/librte_eal/common/include/rte_memory.h | 38 -------------------
>   2 files changed, 44 insertions(+), 38 deletions(-)
> 
> diff --git a/lib/librte_eal/common/include/rte_common.h b/lib/librte_eal/common/include/rte_common.h
> index 05a3a6401..c275093d7 100644
> --- a/lib/librte_eal/common/include/rte_common.h
> +++ b/lib/librte_eal/common/include/rte_common.h
> @@ -291,6 +291,50 @@ rte_is_aligned(void *ptr, unsigned align)
>    */
>   #define RTE_BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
>   
> +/*********** RTE_CACHE related macros ********/
> +
> +#define RTE_CACHE_LINE_MASK (RTE_CACHE_LINE_SIZE-1) /**< Cache line mask. */
> +
> +#define RTE_CACHE_LINE_ROUNDUP(size) \
> +	(RTE_CACHE_LINE_SIZE * ((size + RTE_CACHE_LINE_SIZE - 1) / \
> +	RTE_CACHE_LINE_SIZE))
> +/**< Return the first cache-aligned value greater or equal to size. */
> +
> +/**< Cache line size in terms of log2 */
> +#if RTE_CACHE_LINE_SIZE == 64
> +#define RTE_CACHE_LINE_SIZE_LOG2 6
> +#elif RTE_CACHE_LINE_SIZE == 128
> +#define RTE_CACHE_LINE_SIZE_LOG2 7
> +#else
> +#error "Unsupported cache line size"
> +#endif
> +
> +#define RTE_CACHE_LINE_MIN_SIZE 64	/**< Minimum Cache line size. */
> +
> +/**
> + * Force alignment to cache line.
> + */
> +#define __rte_cache_aligned __rte_aligned(RTE_CACHE_LINE_SIZE)
> +
> +/**
> + * Force minimum cache line alignment.
> + */
> +#define __rte_cache_min_aligned __rte_aligned(RTE_CACHE_LINE_MIN_SIZE)
> +
> +/*********** PA/IOVA type definitions ********/
> +
> +typedef uint64_t phys_addr_t; /**< Physical address. */
> +#define RTE_BAD_PHYS_ADDR ((phys_addr_t)-1)
> +/**
> + * IO virtual address type.
> + * When the physical addressing mode (IOVA as PA) is in use,
> + * the translation from an IO virtual address (IOVA) to a physical address
> + * is a direct mapping, i.e. the same value.
> + * Otherwise, in virtual mode (IOVA as VA), an IOMMU may do the translation.
> + */
> +typedef uint64_t rte_iova_t;
> +#define RTE_BAD_IOVA ((rte_iova_t)-1)
> +
>   /**
>    * Combines 32b inputs most significant set bits into the least
>    * significant bits to construct a value with the same MSBs as x
> diff --git a/lib/librte_eal/common/include/rte_memory.h b/lib/librte_eal/common/include/rte_memory.h
> index 4717dcb43..38e00e382 100644
> --- a/lib/librte_eal/common/include/rte_memory.h
> +++ b/lib/librte_eal/common/include/rte_memory.h
> @@ -39,44 +39,6 @@ enum rte_page_sizes {
>   };
>   
>   #define SOCKET_ID_ANY -1                    /**< Any NUMA socket. */
> -#define RTE_CACHE_LINE_MASK (RTE_CACHE_LINE_SIZE-1) /**< Cache line mask. */
> -
> -#define RTE_CACHE_LINE_ROUNDUP(size) \
> -	(RTE_CACHE_LINE_SIZE * ((size + RTE_CACHE_LINE_SIZE - 1) / RTE_CACHE_LINE_SIZE))
> -/**< Return the first cache-aligned value greater or equal to size. */
> -
> -/**< Cache line size in terms of log2 */
> -#if RTE_CACHE_LINE_SIZE == 64
> -#define RTE_CACHE_LINE_SIZE_LOG2 6
> -#elif RTE_CACHE_LINE_SIZE == 128
> -#define RTE_CACHE_LINE_SIZE_LOG2 7
> -#else
> -#error "Unsupported cache line size"
> -#endif
> -
> -#define RTE_CACHE_LINE_MIN_SIZE 64	/**< Minimum Cache line size. */
> -
> -/**
> - * Force alignment to cache line.
> - */
> -#define __rte_cache_aligned __rte_aligned(RTE_CACHE_LINE_SIZE)
> -
> -/**
> - * Force minimum cache line alignment.
> - */
> -#define __rte_cache_min_aligned __rte_aligned(RTE_CACHE_LINE_MIN_SIZE)
> -
> -typedef uint64_t phys_addr_t; /**< Physical address. */
> -#define RTE_BAD_PHYS_ADDR ((phys_addr_t)-1)
> -/**
> - * IO virtual address type.
> - * When the physical addressing mode (IOVA as PA) is in use,
> - * the translation from an IO virtual address (IOVA) to a physical address
> - * is a direct mapping, i.e. the same value.
> - * Otherwise, in virtual mode (IOVA as VA), an IOMMU may do the translation.
> - */
> -typedef uint64_t rte_iova_t;
> -#define RTE_BAD_IOVA ((rte_iova_t)-1)
>   
>   /**
>    * Physical memory segment descriptor.
> 

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [dpdk-dev] [PATCH 2/3] mbuf: move mbuf definition into a separate file
  2019-08-16 12:53 ` [dpdk-dev] [PATCH 2/3] mbuf: move mbuf definition into a separate file Konstantin Ananyev
@ 2019-08-16 18:51   ` Michel Machado
  0 siblings, 0 replies; 7+ messages in thread
From: Michel Machado @ 2019-08-16 18:51 UTC (permalink / raw)
  To: Konstantin Ananyev, dev; +Cc: olivier.matz, anatoly.burakov, vipin.varghese

Acked-by: Michel Machado <michel@digirati.com.br>

[ ]'s
Michel Machado

On 8/16/19 8:53 AM, Konstantin Ananyev wrote:
> Right now inclusion of rte_mbuf.h header can cause inclusion of
> some arch/os specific headers.
> That prevents it to be included directly by some
> non-DPDK (but related) entities: KNI, BPF programs, etc.
> To overcome that problem usually a separate definitions of rte_mbuf
> structure is created within these entities.
> That aproach has a lot of drawbacks: code duplication, error prone, etc.
> This patch moves rte_mbuf structure definition (and some related macros)
> into a separate file that can be included by both rte_mbuf.h and
> other non-DPDK entities.
> 
> Note that it doesn't introduce any change for current DPDK code.
> 
> Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
> ---
>   lib/librte_mbuf/Makefile        |   5 +-
>   lib/librte_mbuf/meson.build     |   3 +-
>   lib/librte_mbuf/rte_mbuf.h      | 738 +----------------------------
>   lib/librte_mbuf/rte_mbuf_core.h | 793 ++++++++++++++++++++++++++++++++
>   4 files changed, 800 insertions(+), 739 deletions(-)
>   create mode 100644 lib/librte_mbuf/rte_mbuf_core.h
> 
> diff --git a/lib/librte_mbuf/Makefile b/lib/librte_mbuf/Makefile
> index c8f6d2689..f3b76ad23 100644
> --- a/lib/librte_mbuf/Makefile
> +++ b/lib/librte_mbuf/Makefile
> @@ -19,6 +19,9 @@ LIBABIVER := 5
>   SRCS-$(CONFIG_RTE_LIBRTE_MBUF) := rte_mbuf.c rte_mbuf_ptype.c rte_mbuf_pool_ops.c
>   
>   # install includes
> -SYMLINK-$(CONFIG_RTE_LIBRTE_MBUF)-include := rte_mbuf.h rte_mbuf_ptype.h rte_mbuf_pool_ops.h
> +SYMLINK-$(CONFIG_RTE_LIBRTE_MBUF)-include := rte_mbuf.h
> +SYMLINK-$(CONFIG_RTE_LIBRTE_MBUF)-include += rte_mbuf_core.h
> +SYMLINK-$(CONFIG_RTE_LIBRTE_MBUF)-include += rte_mbuf_ptype.h
> +SYMLINK-$(CONFIG_RTE_LIBRTE_MBUF)-include += rte_mbuf_pool_ops.h
>   
>   include $(RTE_SDK)/mk/rte.lib.mk
> diff --git a/lib/librte_mbuf/meson.build b/lib/librte_mbuf/meson.build
> index 6cc11ebb4..36bb6eb9d 100644
> --- a/lib/librte_mbuf/meson.build
> +++ b/lib/librte_mbuf/meson.build
> @@ -3,7 +3,8 @@
>   
>   version = 5
>   sources = files('rte_mbuf.c', 'rte_mbuf_ptype.c', 'rte_mbuf_pool_ops.c')
> -headers = files('rte_mbuf.h', 'rte_mbuf_ptype.h', 'rte_mbuf_pool_ops.h')
> +headers = files('rte_mbuf.h', 'rte_mbuf_core.h',
> +		'rte_mbuf_ptype.h', 'rte_mbuf_pool_ops.h')
>   deps += ['mempool']
>   
>   allow_experimental_apis = true
> diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
> index 98225ec80..528b2f121 100644
> --- a/lib/librte_mbuf/rte_mbuf.h
> +++ b/lib/librte_mbuf/rte_mbuf.h
> @@ -42,367 +42,12 @@
>   #include <rte_branch_prediction.h>
>   #include <rte_byteorder.h>
>   #include <rte_mbuf_ptype.h>
> +#include <rte_mbuf_core.h>
>   
>   #ifdef __cplusplus
>   extern "C" {
>   #endif
>   
> -/*
> - * Packet Offload Features Flags. It also carry packet type information.
> - * Critical resources. Both rx/tx shared these bits. Be cautious on any change
> - *
> - * - RX flags start at bit position zero, and get added to the left of previous
> - *   flags.
> - * - The most-significant 3 bits are reserved for generic mbuf flags
> - * - TX flags therefore start at bit position 60 (i.e. 63-3), and new flags get
> - *   added to the right of the previously defined flags i.e. they should count
> - *   downwards, not upwards.
> - *
> - * Keep these flags synchronized with rte_get_rx_ol_flag_name() and
> - * rte_get_tx_ol_flag_name().
> - */
> -
> -/**
> - * The RX packet is a 802.1q VLAN packet, and the tci has been
> - * saved in in mbuf->vlan_tci.
> - * If the flag PKT_RX_VLAN_STRIPPED is also present, the VLAN
> - * header has been stripped from mbuf data, else it is still
> - * present.
> - */
> -#define PKT_RX_VLAN          (1ULL << 0)
> -
> -#define PKT_RX_RSS_HASH      (1ULL << 1)  /**< RX packet with RSS hash result. */
> -#define PKT_RX_FDIR          (1ULL << 2)  /**< RX packet with FDIR match indicate. */
> -
> -/**
> - * Deprecated.
> - * Checking this flag alone is deprecated: check the 2 bits of
> - * PKT_RX_L4_CKSUM_MASK.
> - * This flag was set when the L4 checksum of a packet was detected as
> - * wrong by the hardware.
> - */
> -#define PKT_RX_L4_CKSUM_BAD  (1ULL << 3)
> -
> -/**
> - * Deprecated.
> - * Checking this flag alone is deprecated: check the 2 bits of
> - * PKT_RX_IP_CKSUM_MASK.
> - * This flag was set when the IP checksum of a packet was detected as
> - * wrong by the hardware.
> - */
> -#define PKT_RX_IP_CKSUM_BAD  (1ULL << 4)
> -
> -#define PKT_RX_EIP_CKSUM_BAD (1ULL << 5)  /**< External IP header checksum error. */
> -
> -/**
> - * A vlan has been stripped by the hardware and its tci is saved in
> - * mbuf->vlan_tci. This can only happen if vlan stripping is enabled
> - * in the RX configuration of the PMD.
> - * When PKT_RX_VLAN_STRIPPED is set, PKT_RX_VLAN must also be set.
> - */
> -#define PKT_RX_VLAN_STRIPPED (1ULL << 6)
> -
> -/**
> - * Mask of bits used to determine the status of RX IP checksum.
> - * - PKT_RX_IP_CKSUM_UNKNOWN: no information about the RX IP checksum
> - * - PKT_RX_IP_CKSUM_BAD: the IP checksum in the packet is wrong
> - * - PKT_RX_IP_CKSUM_GOOD: the IP checksum in the packet is valid
> - * - PKT_RX_IP_CKSUM_NONE: the IP checksum is not correct in the packet
> - *   data, but the integrity of the IP header is verified.
> - */
> -#define PKT_RX_IP_CKSUM_MASK ((1ULL << 4) | (1ULL << 7))
> -
> -#define PKT_RX_IP_CKSUM_UNKNOWN 0
> -#define PKT_RX_IP_CKSUM_BAD     (1ULL << 4)
> -#define PKT_RX_IP_CKSUM_GOOD    (1ULL << 7)
> -#define PKT_RX_IP_CKSUM_NONE    ((1ULL << 4) | (1ULL << 7))
> -
> -/**
> - * Mask of bits used to determine the status of RX L4 checksum.
> - * - PKT_RX_L4_CKSUM_UNKNOWN: no information about the RX L4 checksum
> - * - PKT_RX_L4_CKSUM_BAD: the L4 checksum in the packet is wrong
> - * - PKT_RX_L4_CKSUM_GOOD: the L4 checksum in the packet is valid
> - * - PKT_RX_L4_CKSUM_NONE: the L4 checksum is not correct in the packet
> - *   data, but the integrity of the L4 data is verified.
> - */
> -#define PKT_RX_L4_CKSUM_MASK ((1ULL << 3) | (1ULL << 8))
> -
> -#define PKT_RX_L4_CKSUM_UNKNOWN 0
> -#define PKT_RX_L4_CKSUM_BAD     (1ULL << 3)
> -#define PKT_RX_L4_CKSUM_GOOD    (1ULL << 8)
> -#define PKT_RX_L4_CKSUM_NONE    ((1ULL << 3) | (1ULL << 8))
> -
> -#define PKT_RX_IEEE1588_PTP  (1ULL << 9)  /**< RX IEEE1588 L2 Ethernet PT Packet. */
> -#define PKT_RX_IEEE1588_TMST (1ULL << 10) /**< RX IEEE1588 L2/L4 timestamped packet.*/
> -#define PKT_RX_FDIR_ID       (1ULL << 13) /**< FD id reported if FDIR match. */
> -#define PKT_RX_FDIR_FLX      (1ULL << 14) /**< Flexible bytes reported if FDIR match. */
> -
> -/**
> - * The 2 vlans have been stripped by the hardware and their tci are
> - * saved in mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer).
> - * This can only happen if vlan stripping is enabled in the RX
> - * configuration of the PMD.
> - * When PKT_RX_QINQ_STRIPPED is set, the flags (PKT_RX_VLAN |
> - * PKT_RX_VLAN_STRIPPED | PKT_RX_QINQ) must also be set.
> - */
> -#define PKT_RX_QINQ_STRIPPED (1ULL << 15)
> -
> -/**
> - * When packets are coalesced by a hardware or virtual driver, this flag
> - * can be set in the RX mbuf, meaning that the m->tso_segsz field is
> - * valid and is set to the segment size of original packets.
> - */
> -#define PKT_RX_LRO           (1ULL << 16)
> -
> -/**
> - * Indicate that the timestamp field in the mbuf is valid.
> - */
> -#define PKT_RX_TIMESTAMP     (1ULL << 17)
> -
> -/**
> - * Indicate that security offload processing was applied on the RX packet.
> - */
> -#define PKT_RX_SEC_OFFLOAD		(1ULL << 18)
> -
> -/**
> - * Indicate that security offload processing failed on the RX packet.
> - */
> -#define PKT_RX_SEC_OFFLOAD_FAILED  	(1ULL << 19)
> -
> -/**
> - * The RX packet is a double VLAN, and the outer tci has been
> - * saved in in mbuf->vlan_tci_outer. If PKT_RX_QINQ set, PKT_RX_VLAN
> - * also should be set and inner tci should be saved to mbuf->vlan_tci.
> - * If the flag PKT_RX_QINQ_STRIPPED is also present, both VLANs
> - * headers have been stripped from mbuf data, else they are still
> - * present.
> - */
> -#define PKT_RX_QINQ          (1ULL << 20)
> -
> -/**
> - * Mask of bits used to determine the status of outer RX L4 checksum.
> - * - PKT_RX_OUTER_L4_CKSUM_UNKNOWN: no info about the outer RX L4 checksum
> - * - PKT_RX_OUTER_L4_CKSUM_BAD: the outer L4 checksum in the packet is wrong
> - * - PKT_RX_OUTER_L4_CKSUM_GOOD: the outer L4 checksum in the packet is valid
> - * - PKT_RX_OUTER_L4_CKSUM_INVALID: invalid outer L4 checksum state.
> - *
> - * The detection of PKT_RX_OUTER_L4_CKSUM_GOOD shall be based on the given
> - * HW capability, At minimum, the PMD should support
> - * PKT_RX_OUTER_L4_CKSUM_UNKNOWN and PKT_RX_OUTER_L4_CKSUM_BAD states
> - * if the DEV_RX_OFFLOAD_OUTER_UDP_CKSUM offload is available.
> - */
> -#define PKT_RX_OUTER_L4_CKSUM_MASK	((1ULL << 21) | (1ULL << 22))
> -
> -#define PKT_RX_OUTER_L4_CKSUM_UNKNOWN	0
> -#define PKT_RX_OUTER_L4_CKSUM_BAD	(1ULL << 21)
> -#define PKT_RX_OUTER_L4_CKSUM_GOOD	(1ULL << 22)
> -#define PKT_RX_OUTER_L4_CKSUM_INVALID	((1ULL << 21) | (1ULL << 22))
> -
> -/* add new RX flags here */
> -
> -/* add new TX flags here */
> -
> -/**
> - * Indicate that the metadata field in the mbuf is in use.
> - */
> -#define PKT_TX_METADATA	(1ULL << 40)
> -
> -/**
> - * Outer UDP checksum offload flag. This flag is used for enabling
> - * outer UDP checksum in PMD. To use outer UDP checksum, the user needs to
> - * 1) Enable the following in mbuf,
> - * a) Fill outer_l2_len and outer_l3_len in mbuf.
> - * b) Set the PKT_TX_OUTER_UDP_CKSUM flag.
> - * c) Set the PKT_TX_OUTER_IPV4 or PKT_TX_OUTER_IPV6 flag.
> - * 2) Configure DEV_TX_OFFLOAD_OUTER_UDP_CKSUM offload flag.
> - */
> -#define PKT_TX_OUTER_UDP_CKSUM     (1ULL << 41)
> -
> -/**
> - * UDP Fragmentation Offload flag. This flag is used for enabling UDP
> - * fragmentation in SW or in HW. When use UFO, mbuf->tso_segsz is used
> - * to store the MSS of UDP fragments.
> - */
> -#define PKT_TX_UDP_SEG	(1ULL << 42)
> -
> -/**
> - * Request security offload processing on the TX packet.
> - */
> -#define PKT_TX_SEC_OFFLOAD 		(1ULL << 43)
> -
> -/**
> - * Offload the MACsec. This flag must be set by the application to enable
> - * this offload feature for a packet to be transmitted.
> - */
> -#define PKT_TX_MACSEC        (1ULL << 44)
> -
> -/**
> - * Bits 45:48 used for the tunnel type.
> - * The tunnel type must be specified for TSO or checksum on the inner part
> - * of tunnel packets.
> - * These flags can be used with PKT_TX_TCP_SEG for TSO, or PKT_TX_xxx_CKSUM.
> - * The mbuf fields for inner and outer header lengths are required:
> - * outer_l2_len, outer_l3_len, l2_len, l3_len, l4_len and tso_segsz for TSO.
> - */
> -#define PKT_TX_TUNNEL_VXLAN   (0x1ULL << 45)
> -#define PKT_TX_TUNNEL_GRE     (0x2ULL << 45)
> -#define PKT_TX_TUNNEL_IPIP    (0x3ULL << 45)
> -#define PKT_TX_TUNNEL_GENEVE  (0x4ULL << 45)
> -/** TX packet with MPLS-in-UDP RFC 7510 header. */
> -#define PKT_TX_TUNNEL_MPLSINUDP (0x5ULL << 45)
> -#define PKT_TX_TUNNEL_VXLAN_GPE (0x6ULL << 45)
> -/**
> - * Generic IP encapsulated tunnel type, used for TSO and checksum offload.
> - * It can be used for tunnels which are not standards or listed above.
> - * It is preferred to use specific tunnel flags like PKT_TX_TUNNEL_GRE
> - * or PKT_TX_TUNNEL_IPIP if possible.
> - * The ethdev must be configured with DEV_TX_OFFLOAD_IP_TNL_TSO.
> - * Outer and inner checksums are done according to the existing flags like
> - * PKT_TX_xxx_CKSUM.
> - * Specific tunnel headers that contain payload length, sequence id
> - * or checksum are not expected to be updated.
> - */
> -#define PKT_TX_TUNNEL_IP (0xDULL << 45)
> -/**
> - * Generic UDP encapsulated tunnel type, used for TSO and checksum offload.
> - * UDP tunnel type implies outer IP layer.
> - * It can be used for tunnels which are not standards or listed above.
> - * It is preferred to use specific tunnel flags like PKT_TX_TUNNEL_VXLAN
> - * if possible.
> - * The ethdev must be configured with DEV_TX_OFFLOAD_UDP_TNL_TSO.
> - * Outer and inner checksums are done according to the existing flags like
> - * PKT_TX_xxx_CKSUM.
> - * Specific tunnel headers that contain payload length, sequence id
> - * or checksum are not expected to be updated.
> - */
> -#define PKT_TX_TUNNEL_UDP (0xEULL << 45)
> -/* add new TX TUNNEL type here */
> -#define PKT_TX_TUNNEL_MASK    (0xFULL << 45)
> -
> -/**
> - * Double VLAN insertion (QinQ) request to driver, driver may offload the
> - * insertion based on device capability.
> - * mbuf 'vlan_tci' & 'vlan_tci_outer' must be valid when this flag is set.
> - */
> -#define PKT_TX_QINQ        (1ULL << 49)
> -/* this old name is deprecated */
> -#define PKT_TX_QINQ_PKT    PKT_TX_QINQ
> -
> -/**
> - * TCP segmentation offload. To enable this offload feature for a
> - * packet to be transmitted on hardware supporting TSO:
> - *  - set the PKT_TX_TCP_SEG flag in mbuf->ol_flags (this flag implies
> - *    PKT_TX_TCP_CKSUM)
> - *  - set the flag PKT_TX_IPV4 or PKT_TX_IPV6
> - *  - if it's IPv4, set the PKT_TX_IP_CKSUM flag
> - *  - fill the mbuf offload information: l2_len, l3_len, l4_len, tso_segsz
> - */
> -#define PKT_TX_TCP_SEG       (1ULL << 50)
> -
> -#define PKT_TX_IEEE1588_TMST (1ULL << 51) /**< TX IEEE1588 packet to timestamp. */
> -
> -/**
> - * Bits 52+53 used for L4 packet type with checksum enabled: 00: Reserved,
> - * 01: TCP checksum, 10: SCTP checksum, 11: UDP checksum. To use hardware
> - * L4 checksum offload, the user needs to:
> - *  - fill l2_len and l3_len in mbuf
> - *  - set the flags PKT_TX_TCP_CKSUM, PKT_TX_SCTP_CKSUM or PKT_TX_UDP_CKSUM
> - *  - set the flag PKT_TX_IPV4 or PKT_TX_IPV6
> - */
> -#define PKT_TX_L4_NO_CKSUM   (0ULL << 52) /**< Disable L4 cksum of TX pkt. */
> -#define PKT_TX_TCP_CKSUM     (1ULL << 52) /**< TCP cksum of TX pkt. computed by NIC. */
> -#define PKT_TX_SCTP_CKSUM    (2ULL << 52) /**< SCTP cksum of TX pkt. computed by NIC. */
> -#define PKT_TX_UDP_CKSUM     (3ULL << 52) /**< UDP cksum of TX pkt. computed by NIC. */
> -#define PKT_TX_L4_MASK       (3ULL << 52) /**< Mask for L4 cksum offload request. */
> -
> -/**
> - * Offload the IP checksum in the hardware. The flag PKT_TX_IPV4 should
> - * also be set by the application, although a PMD will only check
> - * PKT_TX_IP_CKSUM.
> - *  - fill the mbuf offload information: l2_len, l3_len
> - */
> -#define PKT_TX_IP_CKSUM      (1ULL << 54)
> -
> -/**
> - * Packet is IPv4. This flag must be set when using any offload feature
> - * (TSO, L3 or L4 checksum) to tell the NIC that the packet is an IPv4
> - * packet. If the packet is a tunneled packet, this flag is related to
> - * the inner headers.
> - */
> -#define PKT_TX_IPV4          (1ULL << 55)
> -
> -/**
> - * Packet is IPv6. This flag must be set when using an offload feature
> - * (TSO or L4 checksum) to tell the NIC that the packet is an IPv6
> - * packet. If the packet is a tunneled packet, this flag is related to
> - * the inner headers.
> - */
> -#define PKT_TX_IPV6          (1ULL << 56)
> -
> -/**
> - * VLAN tag insertion request to driver, driver may offload the insertion
> - * based on the device capability.
> - * mbuf 'vlan_tci' field must be valid when this flag is set.
> - */
> -#define PKT_TX_VLAN          (1ULL << 57)
> -/* this old name is deprecated */
> -#define PKT_TX_VLAN_PKT      PKT_TX_VLAN
> -
> -/**
> - * Offload the IP checksum of an external header in the hardware. The
> - * flag PKT_TX_OUTER_IPV4 should also be set by the application, although
> - * a PMD will only check PKT_TX_OUTER_IP_CKSUM.
> - *  - fill the mbuf offload information: outer_l2_len, outer_l3_len
> - */
> -#define PKT_TX_OUTER_IP_CKSUM   (1ULL << 58)
> -
> -/**
> - * Packet outer header is IPv4. This flag must be set when using any
> - * outer offload feature (L3 or L4 checksum) to tell the NIC that the
> - * outer header of the tunneled packet is an IPv4 packet.
> - */
> -#define PKT_TX_OUTER_IPV4   (1ULL << 59)
> -
> -/**
> - * Packet outer header is IPv6. This flag must be set when using any
> - * outer offload feature (L4 checksum) to tell the NIC that the outer
> - * header of the tunneled packet is an IPv6 packet.
> - */
> -#define PKT_TX_OUTER_IPV6    (1ULL << 60)
> -
> -/**
> - * Bitmask of all supported packet Tx offload features flags,
> - * which can be set for packet.
> - */
> -#define PKT_TX_OFFLOAD_MASK (    \
> -		PKT_TX_OUTER_IPV6 |	 \
> -		PKT_TX_OUTER_IPV4 |	 \
> -		PKT_TX_OUTER_IP_CKSUM |  \
> -		PKT_TX_VLAN_PKT |        \
> -		PKT_TX_IPV6 |		 \
> -		PKT_TX_IPV4 |		 \
> -		PKT_TX_IP_CKSUM |        \
> -		PKT_TX_L4_MASK |         \
> -		PKT_TX_IEEE1588_TMST |	 \
> -		PKT_TX_TCP_SEG |         \
> -		PKT_TX_QINQ_PKT |        \
> -		PKT_TX_TUNNEL_MASK |	 \
> -		PKT_TX_MACSEC |		 \
> -		PKT_TX_SEC_OFFLOAD |	 \
> -		PKT_TX_UDP_SEG |	 \
> -		PKT_TX_OUTER_UDP_CKSUM | \
> -		PKT_TX_METADATA)
> -
> -/**
> - * Mbuf having an external buffer attached. shinfo in mbuf must be filled.
> - */
> -#define EXT_ATTACHED_MBUF    (1ULL << 61)
> -
> -#define IND_ATTACHED_MBUF    (1ULL << 62) /**< Indirect attached mbuf */
> -
> -/** Alignment constraint of mbuf private area. */
> -#define RTE_MBUF_PRIV_ALIGN 8
> -
>   /**
>    * Get the name of a RX offload flag
>    *
> @@ -453,310 +98,6 @@ const char *rte_get_tx_ol_flag_name(uint64_t mask);
>    */
>   int rte_get_tx_ol_flag_list(uint64_t mask, char *buf, size_t buflen);
>   
> -/**
> - * Some NICs need at least 2KB buffer to RX standard Ethernet frame without
> - * splitting it into multiple segments.
> - * So, for mbufs that planned to be involved into RX/TX, the recommended
> - * minimal buffer length is 2KB + RTE_PKTMBUF_HEADROOM.
> - */
> -#define	RTE_MBUF_DEFAULT_DATAROOM	2048
> -#define	RTE_MBUF_DEFAULT_BUF_SIZE	\
> -	(RTE_MBUF_DEFAULT_DATAROOM + RTE_PKTMBUF_HEADROOM)
> -
> -/* define a set of marker types that can be used to refer to set points in the
> - * mbuf */
> -__extension__
> -typedef void    *MARKER[0];   /**< generic marker for a point in a structure */
> -__extension__
> -typedef uint8_t  MARKER8[0];  /**< generic marker with 1B alignment */
> -__extension__
> -typedef uint64_t MARKER64[0]; /**< marker that allows us to overwrite 8 bytes
> -                               * with a single assignment */
> -
> -struct rte_mbuf_sched {
> -	uint32_t queue_id;   /**< Queue ID. */
> -	uint8_t traffic_class;
> -	/**< Traffic class ID. Traffic class 0
> -	 * is the highest priority traffic class.
> -	 */
> -	uint8_t color;
> -	/**< Color. @see enum rte_color.*/
> -	uint16_t reserved;   /**< Reserved. */
> -}; /**< Hierarchical scheduler */
> -
> -/**
> - * enum for the tx_offload bit-fields lengths and offsets.
> - * defines the layout of rte_mbuf tx_offload field.
> - */
> -enum {
> -	RTE_MBUF_L2_LEN_BITS = 7,
> -	RTE_MBUF_L3_LEN_BITS = 9,
> -	RTE_MBUF_L4_LEN_BITS = 8,
> -	RTE_MBUF_TSO_SEGSZ_BITS = 16,
> -	RTE_MBUF_OUTL3_LEN_BITS = 9,
> -	RTE_MBUF_OUTL2_LEN_BITS = 7,
> -	RTE_MBUF_TXOFLD_UNUSED_BITS = sizeof(uint64_t) * CHAR_BIT -
> -		RTE_MBUF_L2_LEN_BITS -
> -		RTE_MBUF_L3_LEN_BITS -
> -		RTE_MBUF_L4_LEN_BITS -
> -		RTE_MBUF_TSO_SEGSZ_BITS -
> -		RTE_MBUF_OUTL3_LEN_BITS -
> -		RTE_MBUF_OUTL2_LEN_BITS,
> -#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
> -	RTE_MBUF_L2_LEN_OFS =
> -		sizeof(uint64_t) * CHAR_BIT - RTE_MBUF_L2_LEN_BITS,
> -	RTE_MBUF_L3_LEN_OFS = RTE_MBUF_L2_LEN_OFS - RTE_MBUF_L3_LEN_BITS,
> -	RTE_MBUF_L4_LEN_OFS = RTE_MBUF_L3_LEN_OFS - RTE_MBUF_L4_LEN_BITS,
> -	RTE_MBUF_TSO_SEGSZ_OFS = RTE_MBUF_L4_LEN_OFS - RTE_MBUF_TSO_SEGSZ_BITS,
> -	RTE_MBUF_OUTL3_LEN_OFS =
> -		RTE_MBUF_TSO_SEGSZ_OFS - RTE_MBUF_OUTL3_LEN_BITS,
> -	RTE_MBUF_OUTL2_LEN_OFS =
> -		RTE_MBUF_OUTL3_LEN_OFS - RTE_MBUF_OUTL2_LEN_BITS,
> -	RTE_MBUF_TXOFLD_UNUSED_OFS =
> -		RTE_MBUF_OUTL2_LEN_OFS - RTE_MBUF_TXOFLD_UNUSED_BITS,
> -#else
> -	RTE_MBUF_L2_LEN_OFS = 0,
> -	RTE_MBUF_L3_LEN_OFS = RTE_MBUF_L2_LEN_OFS + RTE_MBUF_L2_LEN_BITS,
> -	RTE_MBUF_L4_LEN_OFS = RTE_MBUF_L3_LEN_OFS + RTE_MBUF_L3_LEN_BITS,
> -	RTE_MBUF_TSO_SEGSZ_OFS = RTE_MBUF_L4_LEN_OFS + RTE_MBUF_L4_LEN_BITS,
> -	RTE_MBUF_OUTL3_LEN_OFS =
> -		RTE_MBUF_TSO_SEGSZ_OFS + RTE_MBUF_TSO_SEGSZ_BITS,
> -	RTE_MBUF_OUTL2_LEN_OFS =
> -		RTE_MBUF_OUTL3_LEN_OFS + RTE_MBUF_OUTL3_LEN_BITS,
> -	RTE_MBUF_TXOFLD_UNUSED_OFS =
> -		RTE_MBUF_OUTL2_LEN_OFS + RTE_MBUF_OUTL2_LEN_BITS,
> -#endif
> -};
> -
> -/**
> - * The generic rte_mbuf, containing a packet mbuf.
> - */
> -struct rte_mbuf {
> -	MARKER cacheline0;
> -
> -	void *buf_addr;           /**< Virtual address of segment buffer. */
> -	/**
> -	 * Physical address of segment buffer.
> -	 * Force alignment to 8-bytes, so as to ensure we have the exact
> -	 * same mbuf cacheline0 layout for 32-bit and 64-bit. This makes
> -	 * working on vector drivers easier.
> -	 */
> -	RTE_STD_C11
> -	union {
> -		rte_iova_t buf_iova;
> -		rte_iova_t buf_physaddr; /**< deprecated */
> -	} __rte_aligned(sizeof(rte_iova_t));
> -
> -	/* next 8 bytes are initialised on RX descriptor rearm */
> -	MARKER64 rearm_data;
> -	uint16_t data_off;
> -
> -	/**
> -	 * Reference counter. Its size should at least equal to the size
> -	 * of port field (16 bits), to support zero-copy broadcast.
> -	 * It should only be accessed using the following functions:
> -	 * rte_mbuf_refcnt_update(), rte_mbuf_refcnt_read(), and
> -	 * rte_mbuf_refcnt_set(). The functionality of these functions (atomic,
> -	 * or non-atomic) is controlled by the CONFIG_RTE_MBUF_REFCNT_ATOMIC
> -	 * config option.
> -	 */
> -	RTE_STD_C11
> -	union {
> -		rte_atomic16_t refcnt_atomic; /**< Atomically accessed refcnt */
> -		uint16_t refcnt;              /**< Non-atomically accessed refcnt */
> -	};
> -	uint16_t nb_segs;         /**< Number of segments. */
> -
> -	/** Input port (16 bits to support more than 256 virtual ports).
> -	 * The event eth Tx adapter uses this field to specify the output port.
> -	 */
> -	uint16_t port;
> -
> -	uint64_t ol_flags;        /**< Offload features. */
> -
> -	/* remaining bytes are set on RX when pulling packet from descriptor */
> -	MARKER rx_descriptor_fields1;
> -
> -	/*
> -	 * The packet type, which is the combination of outer/inner L2, L3, L4
> -	 * and tunnel types. The packet_type is about data really present in the
> -	 * mbuf. Example: if vlan stripping is enabled, a received vlan packet
> -	 * would have RTE_PTYPE_L2_ETHER and not RTE_PTYPE_L2_VLAN because the
> -	 * vlan is stripped from the data.
> -	 */
> -	RTE_STD_C11
> -	union {
> -		uint32_t packet_type; /**< L2/L3/L4 and tunnel information. */
> -		struct {
> -			uint32_t l2_type:4; /**< (Outer) L2 type. */
> -			uint32_t l3_type:4; /**< (Outer) L3 type. */
> -			uint32_t l4_type:4; /**< (Outer) L4 type. */
> -			uint32_t tun_type:4; /**< Tunnel type. */
> -			RTE_STD_C11
> -			union {
> -				uint8_t inner_esp_next_proto;
> -				/**< ESP next protocol type, valid if
> -				 * RTE_PTYPE_TUNNEL_ESP tunnel type is set
> -				 * on both Tx and Rx.
> -				 */
> -				__extension__
> -				struct {
> -					uint8_t inner_l2_type:4;
> -					/**< Inner L2 type. */
> -					uint8_t inner_l3_type:4;
> -					/**< Inner L3 type. */
> -				};
> -			};
> -			uint32_t inner_l4_type:4; /**< Inner L4 type. */
> -		};
> -	};
> -
> -	uint32_t pkt_len;         /**< Total pkt len: sum of all segments. */
> -	uint16_t data_len;        /**< Amount of data in segment buffer. */
> -	/** VLAN TCI (CPU order), valid if PKT_RX_VLAN is set. */
> -	uint16_t vlan_tci;
> -
> -	RTE_STD_C11
> -	union {
> -		union {
> -			uint32_t rss;     /**< RSS hash result if RSS enabled */
> -			struct {
> -				union {
> -					struct {
> -						uint16_t hash;
> -						uint16_t id;
> -					};
> -					uint32_t lo;
> -					/**< Second 4 flexible bytes */
> -				};
> -				uint32_t hi;
> -				/**< First 4 flexible bytes or FD ID, dependent
> -				 * on PKT_RX_FDIR_* flag in ol_flags.
> -				 */
> -			} fdir;	/**< Filter identifier if FDIR enabled */
> -			struct rte_mbuf_sched sched;
> -			/**< Hierarchical scheduler : 8 bytes */
> -			struct {
> -				uint32_t reserved1;
> -				uint16_t reserved2;
> -				uint16_t txq;
> -				/**< The event eth Tx adapter uses this field
> -				 * to store Tx queue id.
> -				 * @see rte_event_eth_tx_adapter_txq_set()
> -				 */
> -			} txadapter; /**< Eventdev ethdev Tx adapter */
> -			/**< User defined tags. See rte_distributor_process() */
> -			uint32_t usr;
> -		} hash;                   /**< hash information */
> -		struct {
> -			/**
> -			 * Application specific metadata value
> -			 * for egress flow rule match.
> -			 * Valid if PKT_TX_METADATA is set.
> -			 * Located here to allow conjunct use
> -			 * with hash.sched.hi.
> -			 */
> -			uint32_t tx_metadata;
> -			uint32_t reserved;
> -		};
> -	};
> -
> -	/** Outer VLAN TCI (CPU order), valid if PKT_RX_QINQ is set. */
> -	uint16_t vlan_tci_outer;
> -
> -	uint16_t buf_len;         /**< Length of segment buffer. */
> -
> -	/** Valid if PKT_RX_TIMESTAMP is set. The unit and time reference
> -	 * are not normalized but are always the same for a given port.
> -	 * Some devices allow to query rte_eth_read_clock that will return the
> -	 * current device timestamp.
> -	 */
> -	uint64_t timestamp;
> -
> -	/* second cache line - fields only used in slow path or on TX */
> -	MARKER cacheline1 __rte_cache_min_aligned;
> -
> -	RTE_STD_C11
> -	union {
> -		void *userdata;   /**< Can be used for external metadata */
> -		uint64_t udata64; /**< Allow 8-byte userdata on 32-bit */
> -	};
> -
> -	struct rte_mempool *pool; /**< Pool from which mbuf was allocated. */
> -	struct rte_mbuf *next;    /**< Next segment of scattered packet. */
> -
> -	/* fields to support TX offloads */
> -	RTE_STD_C11
> -	union {
> -		uint64_t tx_offload;       /**< combined for easy fetch */
> -		__extension__
> -		struct {
> -			uint64_t l2_len:RTE_MBUF_L2_LEN_BITS;
> -			/**< L2 (MAC) Header Length for non-tunneling pkt.
> -			 * Outer_L4_len + ... + Inner_L2_len for tunneling pkt.
> -			 */
> -			uint64_t l3_len:RTE_MBUF_L3_LEN_BITS;
> -			/**< L3 (IP) Header Length. */
> -			uint64_t l4_len:RTE_MBUF_L4_LEN_BITS;
> -			/**< L4 (TCP/UDP) Header Length. */
> -			uint64_t tso_segsz:RTE_MBUF_TSO_SEGSZ_BITS;
> -			/**< TCP TSO segment size */
> -
> -			/*
> -			 * Fields for Tx offloading of tunnels.
> -			 * These are undefined for packets which don't request
> -			 * any tunnel offloads (outer IP or UDP checksum,
> -			 * tunnel TSO).
> -			 *
> -			 * PMDs should not use these fields unconditionally
> -			 * when calculating offsets.
> -			 *
> -			 * Applications are expected to set appropriate tunnel
> -			 * offload flags when they fill in these fields.
> -			 */
> -			uint64_t outer_l3_len:RTE_MBUF_OUTL3_LEN_BITS;
> -			/**< Outer L3 (IP) Hdr Length. */
> -			uint64_t outer_l2_len:RTE_MBUF_OUTL2_LEN_BITS;
> -			/**< Outer L2 (MAC) Hdr Length. */
> -
> -			/* uint64_t unused:RTE_MBUF_TXOFLD_UNUSED_BITS; */
> -		};
> -	};
> -
> -	/** Size of the application private data. In case of an indirect
> -	 * mbuf, it stores the direct mbuf private data size. */
> -	uint16_t priv_size;
> -
> -	/** Timesync flags for use with IEEE1588. */
> -	uint16_t timesync;
> -
> -	/** Sequence number. See also rte_reorder_insert(). */
> -	uint32_t seqn;
> -
> -	/** Shared data for external buffer attached to mbuf. See
> -	 * rte_pktmbuf_attach_extbuf().
> -	 */
> -	struct rte_mbuf_ext_shared_info *shinfo;
> -
> -} __rte_cache_aligned;
> -
> -/**
> - * Function typedef of callback to free externally attached buffer.
> - */
> -typedef void (*rte_mbuf_extbuf_free_callback_t)(void *addr, void *opaque);
> -
> -/**
> - * Shared data at the end of an external buffer.
> - */
> -struct rte_mbuf_ext_shared_info {
> -	rte_mbuf_extbuf_free_callback_t free_cb; /**< Free callback function */
> -	void *fcb_opaque;                        /**< Free callback argument */
> -	rte_atomic16_t refcnt_atomic;        /**< Atomically accessed refcnt */
> -};
> -
> -/**< Maximum number of nb_segs allowed. */
> -#define RTE_MBUF_MAX_NB_SEGS	UINT16_MAX
> -
>   /**
>    * Prefetch the first part of the mbuf
>    *
> @@ -953,31 +294,6 @@ rte_mbuf_to_priv(struct rte_mbuf *m)
>   	return RTE_PTR_ADD(m, sizeof(struct rte_mbuf));
>   }
>   
> -/**
> - * Returns TRUE if given mbuf is cloned by mbuf indirection, or FALSE
> - * otherwise.
> - *
> - * If a mbuf has its data in another mbuf and references it by mbuf
> - * indirection, this mbuf can be defined as a cloned mbuf.
> - */
> -#define RTE_MBUF_CLONED(mb)     ((mb)->ol_flags & IND_ATTACHED_MBUF)
> -
> -/**
> - * Returns TRUE if given mbuf has an external buffer, or FALSE otherwise.
> - *
> - * External buffer is a user-provided anonymous buffer.
> - */
> -#define RTE_MBUF_HAS_EXTBUF(mb) ((mb)->ol_flags & EXT_ATTACHED_MBUF)
> -
> -/**
> - * Returns TRUE if given mbuf is direct, or FALSE otherwise.
> - *
> - * If a mbuf embeds its own data after the rte_mbuf structure, this mbuf
> - * can be defined as a direct mbuf.
> - */
> -#define RTE_MBUF_DIRECT(mb) \
> -	(!((mb)->ol_flags & (IND_ATTACHED_MBUF | EXT_ATTACHED_MBUF)))
> -
>   /**
>    * Private data in case of pktmbuf pool.
>    *
> @@ -2026,62 +1342,10 @@ static inline struct rte_mbuf *rte_pktmbuf_lastseg(struct rte_mbuf *m)
>   	return m;
>   }
>   
> -/**
> - * A macro that points to an offset into the data in the mbuf.
> - *
> - * The returned pointer is cast to type t. Before using this
> - * function, the user must ensure that the first segment is large
> - * enough to accommodate its data.
> - *
> - * @param m
> - *   The packet mbuf.
> - * @param o
> - *   The offset into the mbuf data.
> - * @param t
> - *   The type to cast the result into.
> - */
> -#define rte_pktmbuf_mtod_offset(m, t, o)	\
> -	((t)((char *)(m)->buf_addr + (m)->data_off + (o)))
> -
> -/**
> - * A macro that points to the start of the data in the mbuf.
> - *
> - * The returned pointer is cast to type t. Before using this
> - * function, the user must ensure that the first segment is large
> - * enough to accommodate its data.
> - *
> - * @param m
> - *   The packet mbuf.
> - * @param t
> - *   The type to cast the result into.
> - */
> -#define rte_pktmbuf_mtod(m, t) rte_pktmbuf_mtod_offset(m, t, 0)
> -
> -/**
> - * A macro that returns the IO address that points to an offset of the
> - * start of the data in the mbuf
> - *
> - * @param m
> - *   The packet mbuf.
> - * @param o
> - *   The offset into the data to calculate address from.
> - */
> -#define rte_pktmbuf_iova_offset(m, o) \
> -	(rte_iova_t)((m)->buf_iova + (m)->data_off + (o))
> -
>   /* deprecated */
>   #define rte_pktmbuf_mtophys_offset(m, o) \
>   	rte_pktmbuf_iova_offset(m, o)
>   
> -/**
> - * A macro that returns the IO address that points to the start of the
> - * data in the mbuf
> - *
> - * @param m
> - *   The packet mbuf.
> - */
> -#define rte_pktmbuf_iova(m) rte_pktmbuf_iova_offset(m, 0)
> -
>   /* deprecated */
>   #define rte_pktmbuf_mtophys(m) rte_pktmbuf_iova(m)
>   
> diff --git a/lib/librte_mbuf/rte_mbuf_core.h b/lib/librte_mbuf/rte_mbuf_core.h
> new file mode 100644
> index 000000000..f52272e55
> --- /dev/null
> +++ b/lib/librte_mbuf/rte_mbuf_core.h
> @@ -0,0 +1,793 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(c) 2010-2014 Intel Corporation.
> + * Copyright 2014 6WIND S.A.
> + */
> +
> +#ifndef _RTE_MBUF_CORE_H_
> +#define _RTE_MBUF_CORE_H_
> +
> +/**
> + * @file
> + * This file contains definion of RTE mbuf structure itself,
> + * packet offload flags and some related macros.
> + * For majority of DPDK entities, it is not recommended to include
> + * this file directly, use include <rte_mbuf.h> instead.
> + */
> +
> +#include <stdint.h>
> +#include <rte_compat.h>
> +#include <rte_common.h>
> +
> +#ifdef __cplusplus
> +extern "C" {
> +#endif
> +
> +/*
> + * Packet Offload Features Flags. It also carry packet type information.
> + * Critical resources. Both rx/tx shared these bits. Be cautious on any change
> + *
> + * - RX flags start at bit position zero, and get added to the left of previous
> + *   flags.
> + * - The most-significant 3 bits are reserved for generic mbuf flags
> + * - TX flags therefore start at bit position 60 (i.e. 63-3), and new flags get
> + *   added to the right of the previously defined flags i.e. they should count
> + *   downwards, not upwards.
> + *
> + * Keep these flags synchronized with rte_get_rx_ol_flag_name() and
> + * rte_get_tx_ol_flag_name().
> + */
> +
> +/**
> + * The RX packet is a 802.1q VLAN packet, and the tci has been
> + * saved in in mbuf->vlan_tci.
> + * If the flag PKT_RX_VLAN_STRIPPED is also present, the VLAN
> + * header has been stripped from mbuf data, else it is still
> + * present.
> + */
> +#define PKT_RX_VLAN          (1ULL << 0)
> +
> +/** RX packet with RSS hash result. */
> +#define PKT_RX_RSS_HASH      (1ULL << 1)
> +
> + /** RX packet with FDIR match indicate. */
> +#define PKT_RX_FDIR          (1ULL << 2)
> +
> +/**
> + * Deprecated.
> + * Checking this flag alone is deprecated: check the 2 bits of
> + * PKT_RX_L4_CKSUM_MASK.
> + * This flag was set when the L4 checksum of a packet was detected as
> + * wrong by the hardware.
> + */
> +#define PKT_RX_L4_CKSUM_BAD  (1ULL << 3)
> +
> +/**
> + * Deprecated.
> + * Checking this flag alone is deprecated: check the 2 bits of
> + * PKT_RX_IP_CKSUM_MASK.
> + * This flag was set when the IP checksum of a packet was detected as
> + * wrong by the hardware.
> + */
> +#define PKT_RX_IP_CKSUM_BAD  (1ULL << 4)
> +
> + /** External IP header checksum error. */
> +#define PKT_RX_EIP_CKSUM_BAD (1ULL << 5)
> +
> +/**
> + * A vlan has been stripped by the hardware and its tci is saved in
> + * mbuf->vlan_tci. This can only happen if vlan stripping is enabled
> + * in the RX configuration of the PMD.
> + * When PKT_RX_VLAN_STRIPPED is set, PKT_RX_VLAN must also be set.
> + */
> +#define PKT_RX_VLAN_STRIPPED (1ULL << 6)
> +
> +/**
> + * Mask of bits used to determine the status of RX IP checksum.
> + * - PKT_RX_IP_CKSUM_UNKNOWN: no information about the RX IP checksum
> + * - PKT_RX_IP_CKSUM_BAD: the IP checksum in the packet is wrong
> + * - PKT_RX_IP_CKSUM_GOOD: the IP checksum in the packet is valid
> + * - PKT_RX_IP_CKSUM_NONE: the IP checksum is not correct in the packet
> + *   data, but the integrity of the IP header is verified.
> + */
> +#define PKT_RX_IP_CKSUM_MASK ((1ULL << 4) | (1ULL << 7))
> +
> +#define PKT_RX_IP_CKSUM_UNKNOWN 0
> +#define PKT_RX_IP_CKSUM_BAD     (1ULL << 4)
> +#define PKT_RX_IP_CKSUM_GOOD    (1ULL << 7)
> +#define PKT_RX_IP_CKSUM_NONE    ((1ULL << 4) | (1ULL << 7))
> +
> +/**
> + * Mask of bits used to determine the status of RX L4 checksum.
> + * - PKT_RX_L4_CKSUM_UNKNOWN: no information about the RX L4 checksum
> + * - PKT_RX_L4_CKSUM_BAD: the L4 checksum in the packet is wrong
> + * - PKT_RX_L4_CKSUM_GOOD: the L4 checksum in the packet is valid
> + * - PKT_RX_L4_CKSUM_NONE: the L4 checksum is not correct in the packet
> + *   data, but the integrity of the L4 data is verified.
> + */
> +#define PKT_RX_L4_CKSUM_MASK ((1ULL << 3) | (1ULL << 8))
> +
> +#define PKT_RX_L4_CKSUM_UNKNOWN 0
> +#define PKT_RX_L4_CKSUM_BAD     (1ULL << 3)
> +#define PKT_RX_L4_CKSUM_GOOD    (1ULL << 8)
> +#define PKT_RX_L4_CKSUM_NONE    ((1ULL << 3) | (1ULL << 8))
> +
> +/** RX IEEE1588 L2 Ethernet PT Packet. */
> +#define PKT_RX_IEEE1588_PTP  (1ULL << 9)
> +
> +/** RX IEEE1588 L2/L4 timestamped packet.*/
> +#define PKT_RX_IEEE1588_TMST (1ULL << 10)
> +
> +/** FD id reported if FDIR match. */
> +#define PKT_RX_FDIR_ID       (1ULL << 13)
> +
> +/** Flexible bytes reported if FDIR match. */
> +#define PKT_RX_FDIR_FLX      (1ULL << 14)
> +
> +/**
> + * The 2 vlans have been stripped by the hardware and their tci are
> + * saved in mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer).
> + * This can only happen if vlan stripping is enabled in the RX
> + * configuration of the PMD.
> + * When PKT_RX_QINQ_STRIPPED is set, the flags (PKT_RX_VLAN |
> + * PKT_RX_VLAN_STRIPPED | PKT_RX_QINQ) must also be set.
> + */
> +#define PKT_RX_QINQ_STRIPPED (1ULL << 15)
> +
> +/**
> + * When packets are coalesced by a hardware or virtual driver, this flag
> + * can be set in the RX mbuf, meaning that the m->tso_segsz field is
> + * valid and is set to the segment size of original packets.
> + */
> +#define PKT_RX_LRO           (1ULL << 16)
> +
> +/**
> + * Indicate that the timestamp field in the mbuf is valid.
> + */
> +#define PKT_RX_TIMESTAMP     (1ULL << 17)
> +
> +/**
> + * Indicate that security offload processing was applied on the RX packet.
> + */
> +#define PKT_RX_SEC_OFFLOAD	(1ULL << 18)
> +
> +/**
> + * Indicate that security offload processing failed on the RX packet.
> + */
> +#define PKT_RX_SEC_OFFLOAD_FAILED	(1ULL << 19)
> +
> +/**
> + * The RX packet is a double VLAN, and the outer tci has been
> + * saved in in mbuf->vlan_tci_outer. If PKT_RX_QINQ set, PKT_RX_VLAN
> + * also should be set and inner tci should be saved to mbuf->vlan_tci.
> + * If the flag PKT_RX_QINQ_STRIPPED is also present, both VLANs
> + * headers have been stripped from mbuf data, else they are still
> + * present.
> + */
> +#define PKT_RX_QINQ          (1ULL << 20)
> +
> +/**
> + * Mask of bits used to determine the status of outer RX L4 checksum.
> + * - PKT_RX_OUTER_L4_CKSUM_UNKNOWN: no info about the outer RX L4 checksum
> + * - PKT_RX_OUTER_L4_CKSUM_BAD: the outer L4 checksum in the packet is wrong
> + * - PKT_RX_OUTER_L4_CKSUM_GOOD: the outer L4 checksum in the packet is valid
> + * - PKT_RX_OUTER_L4_CKSUM_INVALID: invalid outer L4 checksum state.
> + *
> + * The detection of PKT_RX_OUTER_L4_CKSUM_GOOD shall be based on the given
> + * HW capability, At minimum, the PMD should support
> + * PKT_RX_OUTER_L4_CKSUM_UNKNOWN and PKT_RX_OUTER_L4_CKSUM_BAD states
> + * if the DEV_RX_OFFLOAD_OUTER_UDP_CKSUM offload is available.
> + */
> +#define PKT_RX_OUTER_L4_CKSUM_MASK	((1ULL << 21) | (1ULL << 22))
> +
> +#define PKT_RX_OUTER_L4_CKSUM_UNKNOWN	0
> +#define PKT_RX_OUTER_L4_CKSUM_BAD	(1ULL << 21)
> +#define PKT_RX_OUTER_L4_CKSUM_GOOD	(1ULL << 22)
> +#define PKT_RX_OUTER_L4_CKSUM_INVALID	((1ULL << 21) | (1ULL << 22))
> +
> +/* add new RX flags here */
> +
> +/* add new TX flags here */
> +
> +/**
> + * Indicate that the metadata field in the mbuf is in use.
> + */
> +#define PKT_TX_METADATA	(1ULL << 40)
> +
> +/**
> + * Outer UDP checksum offload flag. This flag is used for enabling
> + * outer UDP checksum in PMD. To use outer UDP checksum, the user needs to
> + * 1) Enable the following in mbuf,
> + * a) Fill outer_l2_len and outer_l3_len in mbuf.
> + * b) Set the PKT_TX_OUTER_UDP_CKSUM flag.
> + * c) Set the PKT_TX_OUTER_IPV4 or PKT_TX_OUTER_IPV6 flag.
> + * 2) Configure DEV_TX_OFFLOAD_OUTER_UDP_CKSUM offload flag.
> + */
> +#define PKT_TX_OUTER_UDP_CKSUM     (1ULL << 41)
> +
> +/**
> + * UDP Fragmentation Offload flag. This flag is used for enabling UDP
> + * fragmentation in SW or in HW. When use UFO, mbuf->tso_segsz is used
> + * to store the MSS of UDP fragments.
> + */
> +#define PKT_TX_UDP_SEG	(1ULL << 42)
> +
> +/**
> + * Request security offload processing on the TX packet.
> + */
> +#define PKT_TX_SEC_OFFLOAD	(1ULL << 43)
> +
> +/**
> + * Offload the MACsec. This flag must be set by the application to enable
> + * this offload feature for a packet to be transmitted.
> + */
> +#define PKT_TX_MACSEC        (1ULL << 44)
> +
> +/**
> + * Bits 45:48 used for the tunnel type.
> + * The tunnel type must be specified for TSO or checksum on the inner part
> + * of tunnel packets.
> + * These flags can be used with PKT_TX_TCP_SEG for TSO, or PKT_TX_xxx_CKSUM.
> + * The mbuf fields for inner and outer header lengths are required:
> + * outer_l2_len, outer_l3_len, l2_len, l3_len, l4_len and tso_segsz for TSO.
> + */
> +#define PKT_TX_TUNNEL_VXLAN   (0x1ULL << 45)
> +#define PKT_TX_TUNNEL_GRE     (0x2ULL << 45)
> +#define PKT_TX_TUNNEL_IPIP    (0x3ULL << 45)
> +#define PKT_TX_TUNNEL_GENEVE  (0x4ULL << 45)
> +/** TX packet with MPLS-in-UDP RFC 7510 header. */
> +#define PKT_TX_TUNNEL_MPLSINUDP (0x5ULL << 45)
> +#define PKT_TX_TUNNEL_VXLAN_GPE (0x6ULL << 45)
> +/**
> + * Generic IP encapsulated tunnel type, used for TSO and checksum offload.
> + * It can be used for tunnels which are not standards or listed above.
> + * It is preferred to use specific tunnel flags like PKT_TX_TUNNEL_GRE
> + * or PKT_TX_TUNNEL_IPIP if possible.
> + * The ethdev must be configured with DEV_TX_OFFLOAD_IP_TNL_TSO.
> + * Outer and inner checksums are done according to the existing flags like
> + * PKT_TX_xxx_CKSUM.
> + * Specific tunnel headers that contain payload length, sequence id
> + * or checksum are not expected to be updated.
> + */
> +#define PKT_TX_TUNNEL_IP (0xDULL << 45)
> +/**
> + * Generic UDP encapsulated tunnel type, used for TSO and checksum offload.
> + * UDP tunnel type implies outer IP layer.
> + * It can be used for tunnels which are not standards or listed above.
> + * It is preferred to use specific tunnel flags like PKT_TX_TUNNEL_VXLAN
> + * if possible.
> + * The ethdev must be configured with DEV_TX_OFFLOAD_UDP_TNL_TSO.
> + * Outer and inner checksums are done according to the existing flags like
> + * PKT_TX_xxx_CKSUM.
> + * Specific tunnel headers that contain payload length, sequence id
> + * or checksum are not expected to be updated.
> + */
> +#define PKT_TX_TUNNEL_UDP (0xEULL << 45)
> +/* add new TX TUNNEL type here */
> +#define PKT_TX_TUNNEL_MASK    (0xFULL << 45)
> +
> +/**
> + * Double VLAN insertion (QinQ) request to driver, driver may offload the
> + * insertion based on device capability.
> + * mbuf 'vlan_tci' & 'vlan_tci_outer' must be valid when this flag is set.
> + */
> +#define PKT_TX_QINQ        (1ULL << 49)
> +/* this old name is deprecated */
> +#define PKT_TX_QINQ_PKT    PKT_TX_QINQ
> +
> +/**
> + * TCP segmentation offload. To enable this offload feature for a
> + * packet to be transmitted on hardware supporting TSO:
> + *  - set the PKT_TX_TCP_SEG flag in mbuf->ol_flags (this flag implies
> + *    PKT_TX_TCP_CKSUM)
> + *  - set the flag PKT_TX_IPV4 or PKT_TX_IPV6
> + *  - if it's IPv4, set the PKT_TX_IP_CKSUM flag
> + *  - fill the mbuf offload information: l2_len, l3_len, l4_len, tso_segsz
> + */
> +#define PKT_TX_TCP_SEG       (1ULL << 50)
> +
> +/** TX IEEE1588 packet to timestamp. */
> +#define PKT_TX_IEEE1588_TMST (1ULL << 51)
> +
> +/**
> + * Bits 52+53 used for L4 packet type with checksum enabled: 00: Reserved,
> + * 01: TCP checksum, 10: SCTP checksum, 11: UDP checksum. To use hardware
> + * L4 checksum offload, the user needs to:
> + *  - fill l2_len and l3_len in mbuf
> + *  - set the flags PKT_TX_TCP_CKSUM, PKT_TX_SCTP_CKSUM or PKT_TX_UDP_CKSUM
> + *  - set the flag PKT_TX_IPV4 or PKT_TX_IPV6
> + */
> +#define PKT_TX_L4_NO_CKSUM   (0ULL << 52) /**< Disable L4 cksum of TX pkt. */
> +
> +/** TCP cksum of TX pkt. computed by NIC. */
> +#define PKT_TX_TCP_CKSUM     (1ULL << 52)
> +
> +/** SCTP cksum of TX pkt. computed by NIC. */
> +#define PKT_TX_SCTP_CKSUM    (2ULL << 52)
> +
> +/** UDP cksum of TX pkt. computed by NIC. */
> +#define PKT_TX_UDP_CKSUM     (3ULL << 52)
> +
> +/** Mask for L4 cksum offload request. */
> +#define PKT_TX_L4_MASK       (3ULL << 52)
> +
> +/**
> + * Offload the IP checksum in the hardware. The flag PKT_TX_IPV4 should
> + * also be set by the application, although a PMD will only check
> + * PKT_TX_IP_CKSUM.
> + *  - fill the mbuf offload information: l2_len, l3_len
> + */
> +#define PKT_TX_IP_CKSUM      (1ULL << 54)
> +
> +/**
> + * Packet is IPv4. This flag must be set when using any offload feature
> + * (TSO, L3 or L4 checksum) to tell the NIC that the packet is an IPv4
> + * packet. If the packet is a tunneled packet, this flag is related to
> + * the inner headers.
> + */
> +#define PKT_TX_IPV4          (1ULL << 55)
> +
> +/**
> + * Packet is IPv6. This flag must be set when using an offload feature
> + * (TSO or L4 checksum) to tell the NIC that the packet is an IPv6
> + * packet. If the packet is a tunneled packet, this flag is related to
> + * the inner headers.
> + */
> +#define PKT_TX_IPV6          (1ULL << 56)
> +
> +/**
> + * VLAN tag insertion request to driver, driver may offload the insertion
> + * based on the device capability.
> + * mbuf 'vlan_tci' field must be valid when this flag is set.
> + */
> +#define PKT_TX_VLAN          (1ULL << 57)
> +/* this old name is deprecated */
> +#define PKT_TX_VLAN_PKT      PKT_TX_VLAN
> +
> +/**
> + * Offload the IP checksum of an external header in the hardware. The
> + * flag PKT_TX_OUTER_IPV4 should also be set by the application, although
> + * a PMD will only check PKT_TX_OUTER_IP_CKSUM.
> + *  - fill the mbuf offload information: outer_l2_len, outer_l3_len
> + */
> +#define PKT_TX_OUTER_IP_CKSUM   (1ULL << 58)
> +
> +/**
> + * Packet outer header is IPv4. This flag must be set when using any
> + * outer offload feature (L3 or L4 checksum) to tell the NIC that the
> + * outer header of the tunneled packet is an IPv4 packet.
> + */
> +#define PKT_TX_OUTER_IPV4   (1ULL << 59)
> +
> +/**
> + * Packet outer header is IPv6. This flag must be set when using any
> + * outer offload feature (L4 checksum) to tell the NIC that the outer
> + * header of the tunneled packet is an IPv6 packet.
> + */
> +#define PKT_TX_OUTER_IPV6    (1ULL << 60)
> +
> +/**
> + * Bitmask of all supported packet Tx offload features flags,
> + * which can be set for packet.
> + */
> +#define PKT_TX_OFFLOAD_MASK (    \
> +		PKT_TX_OUTER_IPV6 |	 \
> +		PKT_TX_OUTER_IPV4 |	 \
> +		PKT_TX_OUTER_IP_CKSUM |  \
> +		PKT_TX_VLAN_PKT |        \
> +		PKT_TX_IPV6 |		 \
> +		PKT_TX_IPV4 |		 \
> +		PKT_TX_IP_CKSUM |        \
> +		PKT_TX_L4_MASK |         \
> +		PKT_TX_IEEE1588_TMST |	 \
> +		PKT_TX_TCP_SEG |         \
> +		PKT_TX_QINQ_PKT |        \
> +		PKT_TX_TUNNEL_MASK |	 \
> +		PKT_TX_MACSEC |		 \
> +		PKT_TX_SEC_OFFLOAD |	 \
> +		PKT_TX_UDP_SEG |	 \
> +		PKT_TX_OUTER_UDP_CKSUM | \
> +		PKT_TX_METADATA)
> +
> +/**
> + * Mbuf having an external buffer attached. shinfo in mbuf must be filled.
> + */
> +#define EXT_ATTACHED_MBUF    (1ULL << 61)
> +
> +#define IND_ATTACHED_MBUF    (1ULL << 62) /**< Indirect attached mbuf */
> +
> +/** Alignment constraint of mbuf private area. */
> +#define RTE_MBUF_PRIV_ALIGN 8
> +
> +/**
> + * Some NICs need at least 2KB buffer to RX standard Ethernet frame without
> + * splitting it into multiple segments.
> + * So, for mbufs that planned to be involved into RX/TX, the recommended
> + * minimal buffer length is 2KB + RTE_PKTMBUF_HEADROOM.
> + */
> +#define	RTE_MBUF_DEFAULT_DATAROOM	2048
> +#define	RTE_MBUF_DEFAULT_BUF_SIZE	\
> +	(RTE_MBUF_DEFAULT_DATAROOM + RTE_PKTMBUF_HEADROOM)
> +
> +/*
> + * define a set of marker types that can be used to refer to set points in the
> + * mbuf.
> + */
> +__extension__
> +typedef void    *MARKER[0];   /**< generic marker for a point in a structure */
> +__extension__
> +typedef uint8_t  MARKER8[0];  /**< generic marker with 1B alignment */
> +
> + /** marker that allows us to overwrite 8 bytes with a single assignment */
> +__extension__
> +typedef uint64_t MARKER64[0];
> +
> +struct rte_mbuf_sched {
> +	uint32_t queue_id;   /**< Queue ID. */
> +	uint8_t traffic_class;
> +	/**< Traffic class ID. Traffic class 0
> +	 * is the highest priority traffic class.
> +	 */
> +	uint8_t color;
> +	/**< Color. @see enum rte_color.*/
> +	uint16_t reserved;   /**< Reserved. */
> +}; /**< Hierarchical scheduler */
> +
> +/**
> + * enum for the tx_offload bit-fields lengths and offsets.
> + * defines the layout of rte_mbuf tx_offload field.
> + */
> +enum {
> +	RTE_MBUF_L2_LEN_BITS = 7,
> +	RTE_MBUF_L3_LEN_BITS = 9,
> +	RTE_MBUF_L4_LEN_BITS = 8,
> +	RTE_MBUF_TSO_SEGSZ_BITS = 16,
> +	RTE_MBUF_OUTL3_LEN_BITS = 9,
> +	RTE_MBUF_OUTL2_LEN_BITS = 7,
> +	RTE_MBUF_TXOFLD_UNUSED_BITS = sizeof(uint64_t) * CHAR_BIT -
> +		RTE_MBUF_L2_LEN_BITS -
> +		RTE_MBUF_L3_LEN_BITS -
> +		RTE_MBUF_L4_LEN_BITS -
> +		RTE_MBUF_TSO_SEGSZ_BITS -
> +		RTE_MBUF_OUTL3_LEN_BITS -
> +		RTE_MBUF_OUTL2_LEN_BITS,
> +#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
> +	RTE_MBUF_L2_LEN_OFS =
> +		sizeof(uint64_t) * CHAR_BIT - RTE_MBUF_L2_LEN_BITS,
> +	RTE_MBUF_L3_LEN_OFS = RTE_MBUF_L2_LEN_OFS - RTE_MBUF_L3_LEN_BITS,
> +	RTE_MBUF_L4_LEN_OFS = RTE_MBUF_L3_LEN_OFS - RTE_MBUF_L4_LEN_BITS,
> +	RTE_MBUF_TSO_SEGSZ_OFS = RTE_MBUF_L4_LEN_OFS - RTE_MBUF_TSO_SEGSZ_BITS,
> +	RTE_MBUF_OUTL3_LEN_OFS =
> +		RTE_MBUF_TSO_SEGSZ_OFS - RTE_MBUF_OUTL3_LEN_BITS,
> +	RTE_MBUF_OUTL2_LEN_OFS =
> +		RTE_MBUF_OUTL3_LEN_OFS - RTE_MBUF_OUTL2_LEN_BITS,
> +	RTE_MBUF_TXOFLD_UNUSED_OFS =
> +		RTE_MBUF_OUTL2_LEN_OFS - RTE_MBUF_TXOFLD_UNUSED_BITS,
> +#else
> +	RTE_MBUF_L2_LEN_OFS = 0,
> +	RTE_MBUF_L3_LEN_OFS = RTE_MBUF_L2_LEN_OFS + RTE_MBUF_L2_LEN_BITS,
> +	RTE_MBUF_L4_LEN_OFS = RTE_MBUF_L3_LEN_OFS + RTE_MBUF_L3_LEN_BITS,
> +	RTE_MBUF_TSO_SEGSZ_OFS = RTE_MBUF_L4_LEN_OFS + RTE_MBUF_L4_LEN_BITS,
> +	RTE_MBUF_OUTL3_LEN_OFS =
> +		RTE_MBUF_TSO_SEGSZ_OFS + RTE_MBUF_TSO_SEGSZ_BITS,
> +	RTE_MBUF_OUTL2_LEN_OFS =
> +		RTE_MBUF_OUTL3_LEN_OFS + RTE_MBUF_OUTL3_LEN_BITS,
> +	RTE_MBUF_TXOFLD_UNUSED_OFS =
> +		RTE_MBUF_OUTL2_LEN_OFS + RTE_MBUF_OUTL2_LEN_BITS,
> +#endif
> +};
> +
> +/**
> + * The generic rte_mbuf, containing a packet mbuf.
> + */
> +struct rte_mbuf {
> +	MARKER cacheline0;
> +
> +	void *buf_addr;           /**< Virtual address of segment buffer. */
> +	/**
> +	 * Physical address of segment buffer.
> +	 * Force alignment to 8-bytes, so as to ensure we have the exact
> +	 * same mbuf cacheline0 layout for 32-bit and 64-bit. This makes
> +	 * working on vector drivers easier.
> +	 */
> +	RTE_STD_C11
> +	union {
> +		rte_iova_t buf_iova;
> +		rte_iova_t buf_physaddr; /**< deprecated */
> +	} __rte_aligned(sizeof(rte_iova_t));
> +
> +	/* next 8 bytes are initialised on RX descriptor rearm */
> +	MARKER64 rearm_data;
> +	uint16_t data_off;
> +
> +	/**
> +	 * Reference counter. Its size should at least equal to the size
> +	 * of port field (16 bits), to support zero-copy broadcast.
> +	 * It should only be accessed using the following functions:
> +	 * rte_mbuf_refcnt_update(), rte_mbuf_refcnt_read(), and
> +	 * rte_mbuf_refcnt_set(). The functionality of these functions (atomic,
> +	 * or non-atomic) is controlled by the CONFIG_RTE_MBUF_REFCNT_ATOMIC
> +	 * config option.
> +	 */
> +	RTE_STD_C11
> +	union {
> +		rte_atomic16_t refcnt_atomic; /**< Atomically accessed refcnt */
> +		/** Non-atomically accessed refcnt */
> +		uint16_t refcnt;
> +	};
> +	uint16_t nb_segs;         /**< Number of segments. */
> +
> +	/** Input port (16 bits to support more than 256 virtual ports).
> +	 * The event eth Tx adapter uses this field to specify the output port.
> +	 */
> +	uint16_t port;
> +
> +	uint64_t ol_flags;        /**< Offload features. */
> +
> +	/* remaining bytes are set on RX when pulling packet from descriptor */
> +	MARKER rx_descriptor_fields1;
> +
> +	/*
> +	 * The packet type, which is the combination of outer/inner L2, L3, L4
> +	 * and tunnel types. The packet_type is about data really present in the
> +	 * mbuf. Example: if vlan stripping is enabled, a received vlan packet
> +	 * would have RTE_PTYPE_L2_ETHER and not RTE_PTYPE_L2_VLAN because the
> +	 * vlan is stripped from the data.
> +	 */
> +	RTE_STD_C11
> +	union {
> +		uint32_t packet_type; /**< L2/L3/L4 and tunnel information. */
> +		struct {
> +			uint32_t l2_type:4; /**< (Outer) L2 type. */
> +			uint32_t l3_type:4; /**< (Outer) L3 type. */
> +			uint32_t l4_type:4; /**< (Outer) L4 type. */
> +			uint32_t tun_type:4; /**< Tunnel type. */
> +			RTE_STD_C11
> +			union {
> +				uint8_t inner_esp_next_proto;
> +				/**< ESP next protocol type, valid if
> +				 * RTE_PTYPE_TUNNEL_ESP tunnel type is set
> +				 * on both Tx and Rx.
> +				 */
> +				__extension__
> +				struct {
> +					uint8_t inner_l2_type:4;
> +					/**< Inner L2 type. */
> +					uint8_t inner_l3_type:4;
> +					/**< Inner L3 type. */
> +				};
> +			};
> +			uint32_t inner_l4_type:4; /**< Inner L4 type. */
> +		};
> +	};
> +
> +	uint32_t pkt_len;         /**< Total pkt len: sum of all segments. */
> +	uint16_t data_len;        /**< Amount of data in segment buffer. */
> +	/** VLAN TCI (CPU order), valid if PKT_RX_VLAN is set. */
> +	uint16_t vlan_tci;
> +
> +	RTE_STD_C11
> +	union {
> +		union {
> +			uint32_t rss;     /**< RSS hash result if RSS enabled */
> +			struct {
> +				union {
> +					struct {
> +						uint16_t hash;
> +						uint16_t id;
> +					};
> +					uint32_t lo;
> +					/**< Second 4 flexible bytes */
> +				};
> +				uint32_t hi;
> +				/**< First 4 flexible bytes or FD ID, dependent
> +				 * on PKT_RX_FDIR_* flag in ol_flags.
> +				 */
> +			} fdir;	/**< Filter identifier if FDIR enabled */
> +			struct rte_mbuf_sched sched;
> +			/**< Hierarchical scheduler : 8 bytes */
> +			struct {
> +				uint32_t reserved1;
> +				uint16_t reserved2;
> +				uint16_t txq;
> +				/**< The event eth Tx adapter uses this field
> +				 * to store Tx queue id.
> +				 * @see rte_event_eth_tx_adapter_txq_set()
> +				 */
> +			} txadapter; /**< Eventdev ethdev Tx adapter */
> +			/**< User defined tags. See rte_distributor_process() */
> +			uint32_t usr;
> +		} hash;                   /**< hash information */
> +		struct {
> +			/**
> +			 * Application specific metadata value
> +			 * for egress flow rule match.
> +			 * Valid if PKT_TX_METADATA is set.
> +			 * Located here to allow conjunct use
> +			 * with hash.sched.hi.
> +			 */
> +			uint32_t tx_metadata;
> +			uint32_t reserved;
> +		};
> +	};
> +
> +	/** Outer VLAN TCI (CPU order), valid if PKT_RX_QINQ is set. */
> +	uint16_t vlan_tci_outer;
> +
> +	uint16_t buf_len;         /**< Length of segment buffer. */
> +
> +	/** Valid if PKT_RX_TIMESTAMP is set. The unit and time reference
> +	 * are not normalized but are always the same for a given port.
> +	 * Some devices allow to query rte_eth_read_clock that will return the
> +	 * current device timestamp.
> +	 */
> +	uint64_t timestamp;
> +
> +	/* second cache line - fields only used in slow path or on TX */
> +	MARKER cacheline1 __rte_cache_min_aligned;
> +
> +	RTE_STD_C11
> +	union {
> +		void *userdata;   /**< Can be used for external metadata */
> +		uint64_t udata64; /**< Allow 8-byte userdata on 32-bit */
> +	};
> +
> +	struct rte_mempool *pool; /**< Pool from which mbuf was allocated. */
> +	struct rte_mbuf *next;    /**< Next segment of scattered packet. */
> +
> +	/* fields to support TX offloads */
> +	RTE_STD_C11
> +	union {
> +		uint64_t tx_offload;       /**< combined for easy fetch */
> +		__extension__
> +		struct {
> +			uint64_t l2_len:RTE_MBUF_L2_LEN_BITS;
> +			/**< L2 (MAC) Header Length for non-tunneling pkt.
> +			 * Outer_L4_len + ... + Inner_L2_len for tunneling pkt.
> +			 */
> +			uint64_t l3_len:RTE_MBUF_L3_LEN_BITS;
> +			/**< L3 (IP) Header Length. */
> +			uint64_t l4_len:RTE_MBUF_L4_LEN_BITS;
> +			/**< L4 (TCP/UDP) Header Length. */
> +			uint64_t tso_segsz:RTE_MBUF_TSO_SEGSZ_BITS;
> +			/**< TCP TSO segment size */
> +
> +			/*
> +			 * Fields for Tx offloading of tunnels.
> +			 * These are undefined for packets which don't request
> +			 * any tunnel offloads (outer IP or UDP checksum,
> +			 * tunnel TSO).
> +			 *
> +			 * PMDs should not use these fields unconditionally
> +			 * when calculating offsets.
> +			 *
> +			 * Applications are expected to set appropriate tunnel
> +			 * offload flags when they fill in these fields.
> +			 */
> +			uint64_t outer_l3_len:RTE_MBUF_OUTL3_LEN_BITS;
> +			/**< Outer L3 (IP) Hdr Length. */
> +			uint64_t outer_l2_len:RTE_MBUF_OUTL2_LEN_BITS;
> +			/**< Outer L2 (MAC) Hdr Length. */
> +
> +			/* uint64_t unused:RTE_MBUF_TXOFLD_UNUSED_BITS; */
> +		};
> +	};
> +
> +	/** Size of the application private data. In case of an indirect
> +	 * mbuf, it stores the direct mbuf private data size.
> +	 */
> +	uint16_t priv_size;
> +
> +	/** Timesync flags for use with IEEE1588. */
> +	uint16_t timesync;
> +
> +	/** Sequence number. See also rte_reorder_insert(). */
> +	uint32_t seqn;
> +
> +	/** Shared data for external buffer attached to mbuf. See
> +	 * rte_pktmbuf_attach_extbuf().
> +	 */
> +	struct rte_mbuf_ext_shared_info *shinfo;
> +
> +} __rte_cache_aligned;
> +
> +/**
> + * Function typedef of callback to free externally attached buffer.
> + */
> +typedef void (*rte_mbuf_extbuf_free_callback_t)(void *addr, void *opaque);
> +
> +/**
> + * Shared data at the end of an external buffer.
> + */
> +struct rte_mbuf_ext_shared_info {
> +	rte_mbuf_extbuf_free_callback_t free_cb; /**< Free callback function */
> +	void *fcb_opaque;                        /**< Free callback argument */
> +	rte_atomic16_t refcnt_atomic;        /**< Atomically accessed refcnt */
> +};
> +
> +/**< Maximum number of nb_segs allowed. */
> +#define RTE_MBUF_MAX_NB_SEGS	UINT16_MAX
> +
> +/**
> + * Returns TRUE if given mbuf is cloned by mbuf indirection, or FALSE
> + * otherwise.
> + *
> + * If a mbuf has its data in another mbuf and references it by mbuf
> + * indirection, this mbuf can be defined as a cloned mbuf.
> + */
> +#define RTE_MBUF_CLONED(mb)     ((mb)->ol_flags & IND_ATTACHED_MBUF)
> +
> +/**
> + * Returns TRUE if given mbuf has an external buffer, or FALSE otherwise.
> + *
> + * External buffer is a user-provided anonymous buffer.
> + */
> +#define RTE_MBUF_HAS_EXTBUF(mb) ((mb)->ol_flags & EXT_ATTACHED_MBUF)
> +
> +/**
> + * Returns TRUE if given mbuf is direct, or FALSE otherwise.
> + *
> + * If a mbuf embeds its own data after the rte_mbuf structure, this mbuf
> + * can be defined as a direct mbuf.
> + */
> +#define RTE_MBUF_DIRECT(mb) \
> +	(!((mb)->ol_flags & (IND_ATTACHED_MBUF | EXT_ATTACHED_MBUF)))
> +
> +#define MBUF_INVALID_PORT UINT16_MAX
> +
> +/**
> + * A macro that points to an offset into the data in the mbuf.
> + *
> + * The returned pointer is cast to type t. Before using this
> + * function, the user must ensure that the first segment is large
> + * enough to accommodate its data.
> + *
> + * @param m
> + *   The packet mbuf.
> + * @param o
> + *   The offset into the mbuf data.
> + * @param t
> + *   The type to cast the result into.
> + */
> +#define rte_pktmbuf_mtod_offset(m, t, o)	\
> +	((t)((char *)(m)->buf_addr + (m)->data_off + (o)))
> +
> +/**
> + * A macro that points to the start of the data in the mbuf.
> + *
> + * The returned pointer is cast to type t. Before using this
> + * function, the user must ensure that the first segment is large
> + * enough to accommodate its data.
> + *
> + * @param m
> + *   The packet mbuf.
> + * @param t
> + *   The type to cast the result into.
> + */
> +#define rte_pktmbuf_mtod(m, t) rte_pktmbuf_mtod_offset(m, t, 0)
> +
> +/**
> + * A macro that returns the IO address that points to an offset of the
> + * start of the data in the mbuf
> + *
> + * @param m
> + *   The packet mbuf.
> + * @param o
> + *   The offset into the data to calculate address from.
> + */
> +#define rte_pktmbuf_iova_offset(m, o) \
> +	(rte_iova_t)((m)->buf_iova + (m)->data_off + (o))
> +
> +/**
> + * A macro that returns the IO address that points to the start of the
> + * data in the mbuf
> + *
> + * @param m
> + *   The packet mbuf.
> + */
> +#define rte_pktmbuf_iova(m) rte_pktmbuf_iova_offset(m, 0)
> +
> +#ifdef __cplusplus
> +}
> +#endif
> +
> +#endif /* _RTE_MBUF_CORE_H_ */
> 

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, back to index

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-16 12:53 [dpdk-dev] [PATCH 0/3] move mbuf definition into a separate file Konstantin Ananyev
2019-08-16 12:53 ` [dpdk-dev] [PATCH 1/3] eal: move CACHE and IOVA related definitions Konstantin Ananyev
2019-08-16 18:50   ` Michel Machado
2019-08-16 12:53 ` [dpdk-dev] [PATCH 2/3] mbuf: move mbuf definition into a separate file Konstantin Ananyev
2019-08-16 18:51   ` Michel Machado
2019-08-16 12:53 ` [dpdk-dev] [PATCH 3/3] examples/bpf: remove duplicate mbuf definition Konstantin Ananyev
2019-08-16 18:44   ` Michel Machado

DPDK-dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dpdk-dev/0 dpdk-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dpdk-dev dpdk-dev/ https://lore.kernel.org/dpdk-dev \
		dev@dpdk.org dpdk-dev@archiver.kernel.org
	public-inbox-index dpdk-dev


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox